]> rtime.felk.cvut.cz Git - sysless.git/shortlog
sysless.git
2011-05-29 Pavel PisaUse standard startup files for MSP430 architecture.
2011-05-29 Pavel PisaMSP430 definition of atomic bit operation updated.
2011-05-28 Vladimir BurianSupport of mspgcc 4.5.2
2011-05-27 Pavel PisaC compilers are compliant enough that stdint.h can...
2011-05-02 Pavel Pisah8300: correct broken ld-scipts for h8eurobot and h8can...
2011-05-02 Pavel Pisah8eurobot: provide board enough time to proceed erase...
2011-05-02 Pavel Pisah8300: hi_cpu2 board - correct ld-scripts breakage.
2011-04-26 Pavel PisaLMC1: Added port pin style definition for auxual TLL...
2011-04-26 Pavel Pisalpc17xx: replace hard-coded vector table placement...
2011-03-21 Pavel PisaCorrect PDIUSB header include path.
2011-03-21 Pavel PisaFix build of h8300 hi_cpu2 board support - not tested.
2011-03-17 Pavel PisaCPU defines for MSP430 architecture.
2011-03-16 Vladimir BurianAdded openmsp430 virtex2 board.
2011-03-16 Vladimir BurianAdded mach-openmsp430 arch.
2011-03-16 Vladimir BurianAdded msp430 generic arch.
2011-03-16 Michal Sojkah8300: Port the newest bloader to h8eurobot board
2011-03-16 Michal Sojkah8300/bloader: Wait between botstrap phases
2011-03-16 Michal Sojkah8300: Yet another update of bloader
2011-03-16 Michal Sojkah8300: Update h8canusb ld scripts to work with updated...
2011-03-16 Michal Sojkah8300: bloader: Fix relocation condition
2011-03-16 Michal Sojkah8300: Make bloader work with ELF toolchain
2011-03-01 Pavel PisaLPC17xx: corrected mistake in ADC pin configuration.
2011-03-01 Pavel PisaLPC17xx: define ADC pins in HAL GPIO style as well.
2011-02-20 nemecep1Fixed IRQ_TABLE_SIZE for lpc13xx.
2011-02-17 nemecep1Some common files for lpc23xx are now symlinked from...
2011-02-17 nemecep1Added support for irq in thumb mode for lpc23xx (as...
2011-02-17 nemecep1Fixed PLL initialization on lpc32xx
2011-02-17 nemecep1Added arch for lpc13xx
2011-02-13 Pavel Pisagenposix: use GCC provided atomic functions for this...
2011-01-25 Pavel Pisalpc17xx - optimize for size and discard unused function...
2011-01-23 Pavel PisaSynchronization added to LPC17xx disable_irq and enable...
2011-01-23 Pavel PisaSeparate ldscript for LPC1766 to reflect limited (256kB...
2011-01-18 Pavel PisaIRC Mark pin cannot generate IRQ on Port 1, use MCPWM...
2010-12-21 Pavel PisaDefine SSP1 pins connection on LMC1 board and SSP1...
2010-12-21 Pavel PisaLMC1 board LEDs declared by PORT_PIN macro.
2010-12-17 Pavel PisaCorrected LPC SSP SPI driver to allow receive only...
2010-12-10 Petr Smolikldscripts for lpc1758
2010-11-23 Pavel PisaSSP0 pin definitions for LMC board updated to match...
2010-11-23 Pavel PisaInitial version of SPI driver for LPC17xx SSP periphera...
2010-11-17 Michal SojkaMake arm/oc8n compilable
2010-11-17 Tran Duy KhanhBuild framework for the AT91SAM7 architecture
2010-11-16 Michal SojkaIncluded H8300 boot block and bootstrap loader code
2010-11-16 Michal SojkaIncluded TOHIT H8300 application and flash loader.
2010-11-16 Michal SojkaMake h8300/jt_usb1 board compilable
2010-11-16 Michal SojkaFixed a possible bug in FlWait()
2010-11-16 Michal SojkaAdded more meaningful bootloader error messages
2010-11-16 Michal SojkaAdded meaningful error message
2010-11-16 Michal Sojkah8canusb updated to the new toolchain - bootstrap doesn...
2010-11-16 Michal SojkaLeaf Makefiles updated to work with dash without warnings
2010-11-16 Michal SojkaThe h8eurobot board ldscripts modified to allow ELF...
2010-11-16 Pavel PisaThe hi_cpu2 board ldscripts modified to allow ELF build.
2010-11-16 Pavel Pisah8s2638 MCU register addresses moved to 0xffff0000...
2010-11-16 Pavel PisaUpdate of bit operations primitives in cpu_def.h for...
2010-11-16 Pavel PisaStored copy of up to now used bit-operations primitives...
2010-11-16 Michal SojkaAdded new HW revision for h8eurobot board
2010-11-16 Michal Sojkacmdprocio library moved here from sysless-common reposi...
2010-11-16 Michal SojkaAdded xtal definitions for h8mirosot.
2010-11-16 Michal SojkaMirosot board can be configured to different crystal...
2010-11-16 honzaHCAN registers MCx and MDx redefined correctly as 8...
2010-11-16 Michal Sojkah8eurobot don't use prefix_dir.
2010-11-16 Michal SojkaAdded come constant for PWM to h8s2638h.h.
2010-11-16 Michal SojkaCorrected timer prescaler constants for different channel.
2010-11-16 Michal Sojkahwinit is now working for h8eurobot board.
2010-11-16 Michal SojkaBloader reports problems with flash programming.
2010-11-16 Michal SojkaFixed clock settings for h8eurobot.
2010-11-16 Michal SojkaAdded missing constants for TPU prescaler values.
2010-11-16 Michal SojkaOther parts of h8eurobot suport.
2010-11-16 Michal SojkaAdded priliminary support for h8eurobot board.
2010-11-16 Michal Sojkah8heli: gdbstub commented out
2010-11-16 Michal Sojkah8heli: mycan.c updated to the actual header files...
2010-11-16 otaAdded helicopter application and customizations.
2010-11-16 Michal SojkaDefault SCI channel is specified in sysstem_def.h....
2010-11-16 Michal SojkaSizes of RS232 buffers can be specified by applications.
2010-11-16 Pavel PisaUpdates for HI_CPU2 board.
2010-11-16 Pavel PisaIntroduction of HI_CPU2 board support.
2010-11-16 Nguyen HoangPropper interrupt mode is set by excptvec_initfill.
2010-11-16 Michal SojkaUse of EXR interrupts is now configurable through confi...
2010-11-16 Michal SojkaMirosot: update of config.
2010-11-16 Michal SojkaPetr Kovacik increased the size of SCI buffers.
2010-11-16 Petr KovacikMirosot: changed frequency of a quartz.
2010-11-16 Nguyen HoangAdded CFLAGS for compilation of bluetooth stuff for...
2010-11-16 Stanislav MarekMasks for registers HCAN IRR corrected.
2010-11-16 Petr KovacikIn sci_rs232_setmode baud parameter was changed the...
2010-11-16 Michal SojkaMirosot: config moved to new (default) location
2010-11-16 Michal SojkaAdded some doxygen documentation to SCI driver.
2010-11-16 Pavel PisaThe h8s2638h.h header file included now indirectly...
2010-11-16 Petr KovacikMirosot: changed VER_ID in system_def.h, added board...
2010-11-16 Petr KovacikMirosot: changed default SCI channel.
2010-11-16 Stanislav MarekCorrected default serial port for EDK2638.
2010-11-16 Pavel PisaAdded minimal support for JT_USB1 board.
2010-11-16 Pavel PisaAdded minimal support for H8S2633 CPU.
2010-11-16 Michal SojkaRewrite of serial communication.
2010-11-16 Pavel PisaThe correct, but not functional solution for board...
2010-11-16 Pavel PisaDecreased BPS for initial ROM bootstrap and added load...
2010-11-16 Michal SojkaIt is possible to compile gdb-stub under omk now.
2010-11-16 Stanislav MarekAdded HCAN controler masks for arch H8300.
2010-11-16 Michal SojkaAdded h8heli board
2010-11-16 Pavel PisaSources updated to ensure, that shadow store contains...
2010-11-16 Stanislav MarekEDK2638 shadow registers and deb_led_out correction.
2010-11-16 Stanislav MarekEDK2638 LED macro upgrade.
next