-----------------------------------------------------------------------
0000000000000000 0000007fffffffff 512GB user
-ffffff8000000000 ffffffbbfffcffff ~240GB vmalloc
+ffffff8000000000 ffffffbbfffeffff ~240GB vmalloc
-ffffffbbfffd0000 ffffffbcfffdffff 64KB [guard page]
+ffffffbbffff0000 ffffffbbffffffff 64KB [guard page]
-ffffffbbfffe0000 ffffffbcfffeffff 64KB PCI I/O space
+ffffffbc00000000 ffffffbdffffffff 8GB vmemmap
-ffffffbbffff0000 ffffffbcffffffff 64KB [guard page]
+ffffffbe00000000 ffffffbffbbfffff ~8GB [guard, future vmmemap]
-ffffffbc00000000 ffffffbdffffffff 8GB vmemmap
+ffffffbffbe00000 ffffffbffbe0ffff 64KB PCI I/O space
-ffffffbe00000000 ffffffbffbffffff ~8GB [guard, future vmmemap]
+ffffffbbffff0000 ffffffbcffffffff ~2MB [guard]
ffffffbffc000000 ffffffbfffffffff 64MB modules
--- /dev/null
+OMAP Counter-32K bindings
+
+Required properties:
+- compatible: Must be "ti,omap-counter32k" for OMAP controllers
+- reg: Contains timer register address range (base address and length)
+- ti,hwmods: Name of the hwmod associated to the counter, which is typically
+ "counter_32k"
+
+Example:
+
+counter32k: counter@4a304000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4a304000 0x20>;
+ ti,hwmods = "counter_32k";
+};
--- /dev/null
+OMAP Timer bindings
+
+Required properties:
+- compatible: Must be "ti,omap2-timer" for OMAP2+ controllers.
+- reg: Contains timer register address range (base address and
+ length).
+- interrupts: Contains the interrupt information for the timer. The
+ format is being dependent on which interrupt controller
+ the OMAP device uses.
+- ti,hwmods: Name of the hwmod associated to the timer, "timer<X>",
+ where <X> is the instance number of the timer from the
+ HW spec.
+
+Optional properties:
+- ti,timer-alwon: Indicates the timer is in an alway-on power domain.
+- ti,timer-dsp: Indicates the timer can interrupt the on-chip DSP in
+ addition to the ARM CPU.
+- ti,timer-pwm: Indicates the timer can generate a PWM output.
+- ti,timer-secure: Indicates the timer is reserved on a secure OMAP device
+ and therefore cannot be used by the kernel.
+
+Example:
+
+timer12: timer@48304000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48304000 0x400>;
+ interrupts = <95>;
+ ti,hwmods = "timer12"
+ ti,timer-alwon;
+ ti,timer-secure;
+};
properties:
- compatible : Should be "ti,omap-ocp2scp"
+- reg : Address and length of the register set for the device
- #address-cells, #size-cells : Must be present if the device has sub-nodes
- ranges : the child address space are mapped 1:1 onto the parent address space
- ti,hwmods : must be "ocp2scp_usb_phy"
Sub-nodes:
All the devices connected to ocp2scp are described using sub-node to ocp2scp
+
+ocp2scp@4a0ad000 {
+ compatible = "ti,omap-ocp2scp";
+ reg = <0x4a0ad000 0x1f>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "ocp2scp_usb_phy";
+
+ subnode1 {
+ ...
+ };
+
+ subnode2 {
+ ...
+ };
+};
--- /dev/null
+* Clock bindings for Freescale i.MX25
+
+Required properties:
+- compatible: Should be "fsl,imx25-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX25
+clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ dummy 0
+ osc 1
+ mpll 2
+ upll 3
+ mpll_cpu_3_4 4
+ cpu_sel 5
+ cpu 6
+ ahb 7
+ usb_div 8
+ ipg 9
+ per0_sel 10
+ per1_sel 11
+ per2_sel 12
+ per3_sel 13
+ per4_sel 14
+ per5_sel 15
+ per6_sel 16
+ per7_sel 17
+ per8_sel 18
+ per9_sel 19
+ per10_sel 20
+ per11_sel 21
+ per12_sel 22
+ per13_sel 23
+ per14_sel 24
+ per15_sel 25
+ per0 26
+ per1 27
+ per2 28
+ per3 29
+ per4 30
+ per5 31
+ per6 32
+ per7 33
+ per8 34
+ per9 35
+ per10 36
+ per11 37
+ per12 38
+ per13 39
+ per14 40
+ per15 41
+ csi_ipg_per 42
+ epit_ipg_per 43
+ esai_ipg_per 44
+ esdhc1_ipg_per 45
+ esdhc2_ipg_per 46
+ gpt_ipg_per 47
+ i2c_ipg_per 48
+ lcdc_ipg_per 49
+ nfc_ipg_per 50
+ owire_ipg_per 51
+ pwm_ipg_per 52
+ sim1_ipg_per 53
+ sim2_ipg_per 54
+ ssi1_ipg_per 55
+ ssi2_ipg_per 56
+ uart_ipg_per 57
+ ata_ahb 58
+ reserved 59
+ csi_ahb 60
+ emi_ahb 61
+ esai_ahb 62
+ esdhc1_ahb 63
+ esdhc2_ahb 64
+ fec_ahb 65
+ lcdc_ahb 66
+ rtic_ahb 67
+ sdma_ahb 68
+ slcdc_ahb 69
+ usbotg_ahb 70
+ reserved 71
+ reserved 72
+ reserved 73
+ reserved 74
+ can1_ipg 75
+ can2_ipg 76
+ csi_ipg 77
+ cspi1_ipg 78
+ cspi2_ipg 79
+ cspi3_ipg 80
+ dryice_ipg 81
+ ect_ipg 82
+ epit1_ipg 83
+ epit2_ipg 84
+ reserved 85
+ esdhc1_ipg 86
+ esdhc2_ipg 87
+ fec_ipg 88
+ reserved 89
+ reserved 90
+ reserved 91
+ gpt1_ipg 92
+ gpt2_ipg 93
+ gpt3_ipg 94
+ gpt4_ipg 95
+ reserved 96
+ reserved 97
+ reserved 98
+ iim_ipg 99
+ reserved 100
+ reserved 101
+ kpp_ipg 102
+ lcdc_ipg 103
+ reserved 104
+ pwm1_ipg 105
+ pwm2_ipg 106
+ pwm3_ipg 107
+ pwm4_ipg 108
+ rngb_ipg 109
+ reserved 110
+ scc_ipg 111
+ sdma_ipg 112
+ sim1_ipg 113
+ sim2_ipg 114
+ slcdc_ipg 115
+ spba_ipg 116
+ ssi1_ipg 117
+ ssi2_ipg 118
+ tsc_ipg 119
+ uart1_ipg 120
+ uart2_ipg 121
+ uart3_ipg 122
+ uart4_ipg 123
+ uart5_ipg 124
+ reserved 125
+ wdt_ipg 126
+
+Examples:
+
+clks: ccm@53f80000 {
+ compatible = "fsl,imx25-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ clock-output-names = ...
+ "uart_ipg",
+ "uart_serial",
+ ...;
+};
+
+uart1: serial@43f90000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 79>, <&clks 50>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+};
Examples:
i2c@83fc4000 { /* I2C2 on i.MX51 */
- compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc4000 0x4000>;
interrupts = <63>;
};
i2c@70038000 { /* HS-I2C on i.MX51 */
- compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x70038000 0x4000>;
interrupts = <64>;
clock-frequency = <400000>;
stm,m41t00 Serial Access TIMEKEEPER
stm,m41t62 Serial real-time clock (RTC) with alarm
stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
+taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface
ti,tsc2003 I2C Touch-Screen Controller
ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
+ti,tmp275 Digital Temperature Sensor
--- /dev/null
+* Rohm BU21013 Touch Screen
+
+Required properties:
+ - compatible : "rohm,bu21013_tp"
+ - reg : I2C device address
+
+Optional properties:
+ - touch-gpio : GPIO pin registering a touch event
+ - <supply_name>-supply : Phandle to a regulator supply
+ - rohm,touch-max-x : Maximum outward permitted limit in the X axis
+ - rohm,touch-max-y : Maximum outward permitted limit in the Y axis
+ - rohm,flip-x : Flip touch coordinates on the X axis
+ - rohm,flip-y : Flip touch coordinates on the Y axis
+
+Example:
+
+ i2c@80110000 {
+ bu21013_tp@0x5c {
+ compatible = "rohm,bu21013_tp";
+ reg = <0x5c>;
+ touch-gpio = <&gpio2 20 0x4>;
+ avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+ rohm,touch-max-x = <384>;
+ rohm,touch-max-y = <704>;
+ rohm,flip-y;
+ };
+ };
--- /dev/null
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+ as well as uased as irq pin
+
+Example:
+
+ egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 2>;
+ wakeup-gpios = <&gpio1 9 0>;
+ };
AM33XX MUSB GLUE
- compatible : Should be "ti,musb-am33xx"
+ - reg : offset and length of register sets, first usbss, then for musb instances
+ - interrupts : usbss, musb instance interrupts in order
- ti,hwmods : must be "usb_otg_hs"
- multipoint : Should be "1" indicating the musb controller supports
multipoint. This is a MUSB configuration-specific setting.
represents PERIPHERAL.
- power : Should be "250". This signifies the controller can supply upto
500mA when operating in host mode.
+
+Example:
+
+usb@47400000 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x47400000 0x1000 /* usbss */
+ 0x47401000 0x800 /* musb instance 0 */
+ 0x47401800 0x800>; /* musb instance 1 */
+ interrupts = <17 /* usbss */
+ 18 /* musb instance 0 */
+ 19>; /* musb instance 1 */
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ port0-mode = <3>;
+ port1-mode = <3>;
+ power = <250>;
+ ti,hwmods = "usb_otg_hs";
+};
BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
(not yet published)
-Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
Description
-----------
F: include/linux/altera_jtaguart.h
AMD FAM15H PROCESSOR POWER MONITORING DRIVER
-M: Andreas Herrmann <andreas.herrmann3@amd.com>
+M: Andreas Herrmann <herrmann.der.user@googlemail.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/fam15h_power
S: Maintained
T: git git://git.pengutronix.de/git/imx/linux-2.6.git
F: arch/arm/mach-imx/
-F: arch/arm/plat-mxc/
F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE IMX6
M: Seung-Woo Kim <sw0312.kim@samsung.com>
M: Kyungmin Park <kyungmin.park@samsung.com>
L: dri-devel@lists.freedesktop.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
S: Supported
F: drivers/gpu/drm/exynos
F: include/drm/exynos*
F: drivers/pinctrl/spear/
PKTCDVD DRIVER
-M: Peter Osterlund <petero2@telia.com>
+M: Jiri Kosina <jkosina@suse.cz>
S: Maintained
F: drivers/block/pktcdvd.c
F: include/linux/pktcdvd.h
VERSION = 3
PATCHLEVEL = 7
SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
NAME = Terrified Chipmunk
# *DOCUMENTATION*
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-config ARCH_MXC
- bool "Freescale MXC/iMX-based"
- select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
- select CLKSRC_MMIO
- select GENERIC_CLOCKEVENTS
- select GENERIC_IRQ_CHIP
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
- select USE_OF
- help
- Support for Freescale MXC/iMX-based family of processors
-
config ARCH_MXS
bool "Freescale MXS-based"
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select HAVE_CLK
- select NEED_MACH_GPIO_H
help
Support for TI's OMAP platform (OMAP1/2/3/4).
source "arch/arm/mach-mv78xx0/Kconfig"
-source "arch/arm/plat-mxc/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
source "arch/arm/mach-mxs/Kconfig"
config DEBUG_LL_INCLUDE
string
default "debug/icedcc.S" if DEBUG_ICEDCC
+ default "debug/imx.S" if DEBUG_IMX1_UART || \
+ DEBUG_IMX25_UART || \
+ DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX31_IMX35_UART || \
+ DEBUG_IMX51_UART || \
+ DEBUG_IMX50_IMX53_UART ||\
+ DEBUG_IMX6Q_UART2 || \
+ DEBUG_IMX6Q_UART4
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
default "debug/mvebu.S" if DEBUG_MVEBU_UART
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_MXC) += mxc
plat-$(CONFIG_ARCH_OMAP) += omap
plat-$(CONFIG_ARCH_S3C64XX) += samsung
plat-$(CONFIG_PLAT_IOP) += iop
imx28-m28evk.dtb \
imx28-tx28.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+ omap3-beagle.dtb \
omap3-beagle-xm.dtb \
omap3-evm.dtb \
omap3-tobi.dtb \
omap4-panda.dtb \
- omap4-pandaES.dtb \
- omap4-var_som.dtb \
+ omap4-panda-es.dtb \
+ omap4-var-som.dtb \
omap4-sdp.dtb \
omap5-evm.dtb \
am335x-evm.dtb \
+ am335x-evmsk.dtb \
am335x-bone.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
model = "TI AM335x BeagleBone";
compatible = "ti,am335x-bone", "ti,am33xx";
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+ am33xx_pinmux: pinmux@44e10800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ user_leds_s0: user_leds_s0 {
+ pinctrl-single,pins = <
+ 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+ 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
+ 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
+ 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+ >;
+ };
+ };
+
ocp {
uart1: serial@44e09000 {
status = "okay";
};
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ led@2 {
+ label = "beaglebone:green:heartbeat";
+ gpios = <&gpio2 21 0>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "beaglebone:green:mmc0";
+ gpios = <&gpio2 22 0>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@4 {
+ label = "beaglebone:green:usr2";
+ gpios = <&gpio2 23 0>;
+ default-state = "off";
+ };
+
+ led@5 {
+ label = "beaglebone:green:usr3";
+ gpios = <&gpio2 24 0>;
+ default-state = "off";
+ };
+ };
};
/include/ "tps65217.dtsi"
model = "TI AM335x EVM";
compatible = "ti,am335x-evm", "ti,am33xx";
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+ am33xx_pinmux: pinmux@44e10800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
+
+ matrix_keypad_s0: matrix_keypad_s0 {
+ pinctrl-single,pins = <
+ 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+ 0x58 0x7 /* gpmc_a6.gpio1_22, OUTPUT | MODE7 */
+ 0x64 0x27 /* gpmc_a9.gpio1_25, INPUT | MODE7 */
+ 0x68 0x27 /* gpmc_a10.gpio1_26, INPUT | MODE7 */
+ 0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */
+ >;
+ };
+
+ volume_keys_s0: volume_keys_s0 {
+ pinctrl-single,pins = <
+ 0x150 0x27 /* spi0_sclk.gpio0_2, INPUT | MODE7 */
+ 0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */
+ >;
+ };
+ };
+
ocp {
uart1: serial@44e09000 {
status = "okay";
reg = <0x2d>;
};
};
+
+ i2c2: i2c@4802a000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ lis331dlh: lis331dlh@18 {
+ compatible = "st,lis331dlh", "st,lis3lv02d";
+ reg = <0x18>;
+ Vdd-supply = <&lis3_reg>;
+ Vdd_IO-supply = <&lis3_reg>;
+
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+ st,click-thresh-x = <10>;
+ st,click-thresh-y = <10>;
+ st,click-thresh-z = <10>;
+ st,irq1-click;
+ st,irq2-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ st,min-limit-x = <120>;
+ st,min-limit-y = <120>;
+ st,min-limit-z = <140>;
+ st,max-limit-x = <550>;
+ st,max-limit-y = <550>;
+ st,max-limit-z = <750>;
+ };
+
+ tsl2550: tsl2550@39 {
+ compatible = "taos,tsl2550";
+ reg = <0x39>;
+ };
+
+ tmp275: tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+ };
};
vbat: fixedregulator@0 {
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
+
+ lis3_reg: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "lis3_reg";
+ regulator-boot-on;
+ };
+
+ matrix_keypad: matrix_keypad@0 {
+ compatible = "gpio-matrix-keypad";
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <2>;
+
+ row-gpios = <&gpio2 25 0 /* Bank1, pin25 */
+ &gpio2 26 0 /* Bank1, pin26 */
+ &gpio2 27 0>; /* Bank1, pin27 */
+
+ col-gpios = <&gpio2 21 0 /* Bank1, pin21 */
+ &gpio2 22 0>; /* Bank1, pin22 */
+
+ linux,keymap = <0x0000008b /* MENU */
+ 0x0100009e /* BACK */
+ 0x02000069 /* LEFT */
+ 0x0001006a /* RIGHT */
+ 0x0101001c /* ENTER */
+ 0x0201006c>; /* DOWN */
+ };
+
+ gpio_keys: volume_keys@0 {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ switch@9 {
+ label = "volume-up";
+ linux,code = <115>;
+ gpios = <&gpio1 2 1>;
+ gpio-key,wakeup;
+ };
+
+ switch@10 {
+ label = "volume-down";
+ linux,code = <114>;
+ gpios = <&gpio1 3 1>;
+ gpio-key,wakeup;
+ };
+ };
};
/include/ "tps65910.dtsi"
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * AM335x Starter Kit
+ * http://www.ti.com/tool/tmdssk3358
+ */
+
+/dts-v1/;
+
+/include/ "am33xx.dtsi"
+
+/ {
+ model = "TI AM335x EVM-SK";
+ compatible = "ti,am335x-evmsk", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ am33xx_pinmux: pinmux@44e10800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>;
+
+ user_leds_s0: user_leds_s0 {
+ pinctrl-single,pins = <
+ 0x10 0x7 /* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */
+ 0x14 0x7 /* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */
+ 0x18 0x7 /* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */
+ 0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */
+ >;
+ };
+
+ gpio_keys_s0: gpio_keys_s0 {
+ pinctrl-single,pins = <
+ 0x94 0x27 /* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */
+ 0x90 0x27 /* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */
+ 0x70 0x27 /* gpmc_wait0.gpio0_30, INPUT | MODE7 */
+ 0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */
+ >;
+ };
+ };
+
+ ocp {
+ uart1: serial@44e09000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@44e0b000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ };
+
+ lis331dlh: lis331dlh@18 {
+ compatible = "st,lis331dlh", "st,lis3lv02d";
+ reg = <0x18>;
+ Vdd-supply = <&lis3_reg>;
+ Vdd_IO-supply = <&lis3_reg>;
+
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+ st,click-thresh-x = <10>;
+ st,click-thresh-y = <10>;
+ st,click-thresh-z = <10>;
+ st,irq1-click;
+ st,irq2-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ st,min-limit-x = <120>;
+ st,min-limit-y = <120>;
+ st,min-limit-z = <140>;
+ st,max-limit-x = <550>;
+ st,max-limit-y = <550>;
+ st,max-limit-z = <750>;
+ };
+ };
+ };
+
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ lis3_reg: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "lis3_reg";
+ regulator-boot-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "evmsk:green:usr0";
+ gpios = <&gpio2 4 0>;
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "evmsk:green:usr1";
+ gpios = <&gpio2 5 0>;
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "evmsk:green:mmc0";
+ gpios = <&gpio2 6 0>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@4 {
+ label = "evmsk:green:heartbeat";
+ gpios = <&gpio2 7 0>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
+ gpio_buttons: gpio_buttons@0 {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@1 {
+ label = "button0";
+ linux,code = <0x100>;
+ gpios = <&gpio3 3 0>;
+ };
+
+ switch@2 {
+ label = "button1";
+ linux,code = <0x101>;
+ gpios = <&gpio3 2 0>;
+ };
+
+ switch@3 {
+ label = "button2";
+ linux,code = <0x102>;
+ gpios = <&gpio1 30 0>;
+ gpio-key,wakeup;
+ };
+
+ switch@4 {
+ label = "button3";
+ linux,code = <0x103>;
+ gpios = <&gpio3 5 0>;
+ };
+ };
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1312500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-always-on;
+ };
+ };
+};
/ {
compatible = "ti,am33xx";
+ interrupt-parent = <&intc>;
aliases {
serial0 = &uart1;
cpus {
cpu@0 {
compatible = "arm,cortex-a8";
+
+ /*
+ * To consider voltage drop between PMIC and SoC,
+ * tolerance value is reduced to 2% from 4% and
+ * voltage value is increased as a precaution.
+ */
+ operating-points = <
+ /* kHz uV */
+ 720000 1285000
+ 600000 1225000
+ 500000 1125000
+ 275000 1125000
+ >;
+ voltage-tolerance = <2>; /* 2 percentage */
+ clock-latency = <300000>; /* From omap-cpufreq driver */
};
};
};
};
+ am33xx_pinmux: pinmux@44e10800 {
+ compatible = "pinctrl-single";
+ reg = <0x44e10800 0x0238>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7f>;
+ };
+
/*
* XXX: Use a flat representation of the AM33XX interconnect.
* The real AM33XX interconnect network is quite complex.Since
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x44e07000 0x1000>;
- interrupt-parent = <&intc>;
interrupts = <96>;
};
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x4804c000 0x1000>;
- interrupt-parent = <&intc>;
interrupts = <98>;
};
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x481ac000 0x1000>;
- interrupt-parent = <&intc>;
interrupts = <32>;
};
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x481ae000 0x1000>;
- interrupt-parent = <&intc>;
interrupts = <62>;
};
ti,hwmods = "uart1";
clock-frequency = <48000000>;
reg = <0x44e09000 0x2000>;
- interrupt-parent = <&intc>;
interrupts = <72>;
status = "disabled";
};
ti,hwmods = "uart2";
clock-frequency = <48000000>;
reg = <0x48022000 0x2000>;
- interrupt-parent = <&intc>;
interrupts = <73>;
status = "disabled";
};
ti,hwmods = "uart3";
clock-frequency = <48000000>;
reg = <0x48024000 0x2000>;
- interrupt-parent = <&intc>;
interrupts = <74>;
status = "disabled";
};
ti,hwmods = "uart4";
clock-frequency = <48000000>;
reg = <0x481a6000 0x2000>;
- interrupt-parent = <&intc>;
interrupts = <44>;
status = "disabled";
};
ti,hwmods = "uart5";
clock-frequency = <48000000>;
reg = <0x481a8000 0x2000>;
- interrupt-parent = <&intc>;
interrupts = <45>;
status = "disabled";
};
ti,hwmods = "uart6";
clock-frequency = <48000000>;
reg = <0x481aa000 0x2000>;
- interrupt-parent = <&intc>;
interrupts = <46>;
status = "disabled";
};
#size-cells = <0>;
ti,hwmods = "i2c1";
reg = <0x44e0b000 0x1000>;
- interrupt-parent = <&intc>;
interrupts = <70>;
status = "disabled";
};
#size-cells = <0>;
ti,hwmods = "i2c2";
reg = <0x4802a000 0x1000>;
- interrupt-parent = <&intc>;
interrupts = <71>;
status = "disabled";
};
#size-cells = <0>;
ti,hwmods = "i2c3";
reg = <0x4819c000 0x1000>;
- interrupt-parent = <&intc>;
interrupts = <30>;
status = "disabled";
};
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
reg = <0x44e35000 0x1000>;
- interrupt-parent = <&intc>;
interrupts = <91>;
};
+
+ dcan0: d_can@481cc000 {
+ compatible = "bosch,d_can";
+ ti,hwmods = "d_can0";
+ reg = <0x481cc000 0x2000>;
+ interrupts = <52>;
+ status = "disabled";
+ };
+
+ dcan1: d_can@481d0000 {
+ compatible = "bosch,d_can";
+ ti,hwmods = "d_can1";
+ reg = <0x481d0000 0x2000>;
+ interrupts = <55>;
+ status = "disabled";
+ };
+
+ timer1: timer@44e31000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x44e31000 0x400>;
+ interrupts = <67>;
+ ti,hwmods = "timer1";
+ ti,timer-alwon;
+ };
+
+ timer2: timer@48040000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48040000 0x400>;
+ interrupts = <68>;
+ ti,hwmods = "timer2";
+ };
+
+ timer3: timer@48042000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48042000 0x400>;
+ interrupts = <69>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@48044000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48044000 0x400>;
+ interrupts = <92>;
+ ti,hwmods = "timer4";
+ ti,timer-pwm;
+ };
+
+ timer5: timer@48046000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48046000 0x400>;
+ interrupts = <93>;
+ ti,hwmods = "timer5";
+ ti,timer-pwm;
+ };
+
+ timer6: timer@48048000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48048000 0x400>;
+ interrupts = <94>;
+ ti,hwmods = "timer6";
+ ti,timer-pwm;
+ };
+
+ timer7: timer@4804a000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4804a000 0x400>;
+ interrupts = <95>;
+ ti,hwmods = "timer7";
+ ti,timer-pwm;
+ };
+
+ rtc@44e3e000 {
+ compatible = "ti,da830-rtc";
+ reg = <0x44e3e000 0x1000>;
+ interrupts = <75
+ 76>;
+ ti,hwmods = "rtc";
+ };
+
+ spi0: spi@48030000 {
+ compatible = "ti,omap4-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x48030000 0x400>;
+ interrupt = <65>;
+ ti,spi-num-cs = <2>;
+ ti,hwmods = "spi0";
+ status = "disabled";
+ };
+
+ spi1: spi@481a0000 {
+ compatible = "ti,omap4-mcspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x481a0000 0x400>;
+ interrupt = <125>;
+ ti,spi-num-cs = <2>;
+ ti,hwmods = "spi1";
+ status = "disabled";
+ };
+
+ usb@47400000 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x47400000 0x1000 /* usbss */
+ 0x47401000 0x800 /* musb instance 0 */
+ 0x47401800 0x800>; /* musb instance 1 */
+ interrupts = <17 /* usbss */
+ 18 /* musb instance 0 */
+ 19>; /* musb instance 1 */
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ port0-mode = <3>;
+ port1-mode = <3>;
+ power = <250>;
+ ti,hwmods = "usb_otg_hs";
+ };
};
};
--- /dev/null
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+
+/ {
+ model = "ST-Ericsson CCU9540 platform with Device Tree";
+ compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ soc-u9500 {
+ uart@80120000 {
+ status = "okay";
+ };
+
+ uart@80121000 {
+ status = "okay";
+ };
+
+ uart@80007000 {
+ status = "okay";
+ };
+
+ // External Micro SD slot
+ sdi0_per1@80126000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ mmc-cap-sd-highspeed;
+ mmc-cap-mmc-highspeed;
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+ cd-gpios = <&gpio7 6 0x4>; // 230
+ cd-inverted;
+
+ status = "okay";
+ };
+
+
+ // WLAN SDIO channel
+ sdi1_per2@80118000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+
+ status = "okay";
+ };
+
+ // On-board eMMC
+ sdi4_per2@80114000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <8>;
+ mmc-cap-mmc-highspeed;
+ vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+ status = "okay";
+ };
+ };
+};
// DB8500_REGULATOR_VAPE
db8500_vape_reg: db8500_vape {
regulator-compatible = "db8500_vape";
- regulator-name = "db8500-vape";
regulator-always-on;
};
// DB8500_REGULATOR_VARM
db8500_varm_reg: db8500_varm {
regulator-compatible = "db8500_varm";
- regulator-name = "db8500-varm";
};
// DB8500_REGULATOR_VMODEM
db8500_vmodem_reg: db8500_vmodem {
regulator-compatible = "db8500_vmodem";
- regulator-name = "db8500-vmodem";
};
// DB8500_REGULATOR_VPLL
db8500_vpll_reg: db8500_vpll {
regulator-compatible = "db8500_vpll";
- regulator-name = "db8500-vpll";
};
// DB8500_REGULATOR_VSMPS1
db8500_vsmps1_reg: db8500_vsmps1 {
regulator-compatible = "db8500_vsmps1";
- regulator-name = "db8500-vsmps1";
};
// DB8500_REGULATOR_VSMPS2
db8500_vsmps2_reg: db8500_vsmps2 {
regulator-compatible = "db8500_vsmps2";
- regulator-name = "db8500-vsmps2";
};
// DB8500_REGULATOR_VSMPS3
db8500_vsmps3_reg: db8500_vsmps3 {
regulator-compatible = "db8500_vsmps3";
- regulator-name = "db8500-vsmps3";
};
// DB8500_REGULATOR_VRF1
db8500_vrf1_reg: db8500_vrf1 {
regulator-compatible = "db8500_vrf1";
- regulator-name = "db8500-vrf1";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSP
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
regulator-compatible = "db8500_sva_mmdsp";
- regulator-name = "db8500-sva-mmdsp";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
regulator-compatible = "db8500_sva_mmdsp_ret";
- regulator-name = "db8500-sva-mmdsp-ret";
};
// DB8500_REGULATOR_SWITCH_SVAPIPE
db8500_sva_pipe_reg: db8500_sva_pipe {
regulator-compatible = "db8500_sva_pipe";
- regulator-name = "db8500_sva_pipe";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSP
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
regulator-compatible = "db8500_sia_mmdsp";
- regulator-name = "db8500_sia_mmdsp";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
- regulator-name = "db8500-sia-mmdsp-ret";
};
// DB8500_REGULATOR_SWITCH_SIAPIPE
db8500_sia_pipe_reg: db8500_sia_pipe {
regulator-compatible = "db8500_sia_pipe";
- regulator-name = "db8500-sia-pipe";
};
// DB8500_REGULATOR_SWITCH_SGA
db8500_sga_reg: db8500_sga {
regulator-compatible = "db8500_sga";
- regulator-name = "db8500-sga";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_B2R2_MCDE
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
regulator-compatible = "db8500_b2r2_mcde";
- regulator-name = "db8500-b2r2-mcde";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_ESRAM12
db8500_esram12_reg: db8500_esram12 {
regulator-compatible = "db8500_esram12";
- regulator-name = "db8500-esram12";
};
// DB8500_REGULATOR_SWITCH_ESRAM12RET
db8500_esram12_ret_reg: db8500_esram12_ret {
regulator-compatible = "db8500_esram12_ret";
- regulator-name = "db8500-esram12-ret";
};
// DB8500_REGULATOR_SWITCH_ESRAM34
db8500_esram34_reg: db8500_esram34 {
regulator-compatible = "db8500_esram34";
- regulator-name = "db8500-esram34";
};
// DB8500_REGULATOR_SWITCH_ESRAM34RET
db8500_esram34_ret_reg: db8500_esram34_ret {
regulator-compatible = "db8500_esram34_ret";
- regulator-name = "db8500-esram34-ret";
};
};
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-compatible = "ab8500_ldo_aux1";
- regulator-name = "V-DISPLAY";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
// supplies to the on-board eMMC
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
regulator-compatible = "ab8500_ldo_aux2";
- regulator-name = "V-eMMC1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for VAUX3; SDcard slots
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
regulator-compatible = "ab8500_ldo_aux3";
- regulator-name = "V-MMC-SD";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for v-intcore12; VINTCORE12 LDO
ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
regulator-compatible = "ab8500_ldo_initcore";
- regulator-name = "V-INTCORE";
};
// supply for tvout; gpadc; TVOUT LDO
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
regulator-compatible = "ab8500_ldo_tvout";
- regulator-name = "V-TVOUT";
};
// supply for ab8500-usb; USB LDO
ab8500_ldo_usb_reg: ab8500_ldo_usb {
regulator-compatible = "ab8500_ldo_usb";
- regulator-name = "dummy";
};
// supply for ab8500-vaudio; VAUDIO LDO
ab8500_ldo_audio_reg: ab8500_ldo_audio {
regulator-compatible = "ab8500_ldo_audio";
- regulator-name = "V-AUD";
};
// supply for v-anamic1 VAMic1-LDO
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
regulator-compatible = "ab8500_ldo_anamic1";
- regulator-name = "V-AMIC1";
};
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
regulator-compatible = "ab8500_ldo_amamic2";
- regulator-name = "V-AMIC2";
};
// supply for v-dmic; VDMIC LDO
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
regulator-compatible = "ab8500_ldo_dmic";
- regulator-name = "V-DMIC";
};
// supply for U8500 CSI/DSI; VANA LDO
ab8500_ldo_ana_reg: ab8500_ldo_ana {
regulator-compatible = "ab8500_ldo_ana";
- regulator-name = "V-CSI/DSI";
};
};
};
status = "disabled";
};
- sdi@80126000 {
+ sdi0_per1@80126000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
interrupts = <0 60 0x4>;
status = "disabled";
};
- sdi@80118000 {
+ sdi1_per2@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
interrupts = <0 50 0x4>;
status = "disabled";
};
- sdi@80005000 {
+ sdi2_per3@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
interrupts = <0 41 0x4>;
status = "disabled";
};
- sdi@80119000 {
+ sdi3_per2@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
};
- sdi@80114000 {
+ sdi4_per2@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 99 0x4>;
status = "disabled";
};
- sdi@80008000 {
+ sdi5_per3@80008000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80008000 0x1000>;
interrupts = <0 100 0x4>;
ranges = <0 0x50000000 0x4000000>;
status = "disabled";
};
+
+ vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2600000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ gpios = <&tc3589x_gpio 18 0x4>;
+ gpio-enable = <&tc3589x_gpio 17 0x4>;
+ states = <1800000 0x1
+ 2900000 0x0>;
+ };
};
};
--- /dev/null
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "dbx5x0.dtsi"
+
+/ {
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ linux,code = <11>;
+ label = "SFH7741 Proximity Sensor";
+ };
+ };
+
+ soc-u9500 {
+ uart@80120000 {
+ status = "okay";
+ };
+
+ uart@80121000 {
+ status = "okay";
+ };
+
+ uart@80007000 {
+ status = "okay";
+ };
+
+ i2c@80004000 {
+ tc3589x@42 {
+ compatible = "tc3589x";
+ reg = <0x42>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <25 0x1>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ tc3589x_gpio: tc3589x_gpio {
+ compatible = "tc3589x-gpio";
+ interrupts = <0 0x1>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+
+ i2c@80128000 {
+ lp5521@0x33 {
+ compatible = "lp5521";
+ reg = <0x33>;
+ };
+
+ lp5521@0x34 {
+ compatible = "lp5521";
+ reg = <0x34>;
+ };
+
+ bh1780@0x29 {
+ compatible = "rohm,bh1780gli";
+ reg = <0x33>;
+ };
+ };
+
+ // External Micro SD slot
+ sdi0_per1@80126000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ mmc-cap-sd-highspeed;
+ mmc-cap-mmc-highspeed;
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+ cd-gpios = <&tc3589x_gpio 3 0x4>;
+
+ status = "okay";
+ };
+
+ // WLAN SDIO channel
+ sdi1_per2@80118000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+
+ status = "okay";
+ };
+
+ // PoP:ed eMMC
+ sdi2_per3@80005000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <8>;
+ mmc-cap-mmc-highspeed;
+
+ status = "okay";
+ };
+
+ // On-board eMMC
+ sdi4_per2@80114000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <8>;
+ mmc-cap-mmc-highspeed;
+ vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+ status = "okay";
+ };
+
+ sound {
+ compatible = "stericsson,snd-soc-mop500";
+
+ stericsson,cpu-dai = <&msp1 &msp3>;
+ stericsson,audio-codec = <&codec>;
+ };
+
+ msp1: msp@80124000 {
+ status = "okay";
+ };
+
+ msp3: msp@80125000 {
+ status = "okay";
+ };
+
+ prcmu@80157000 {
+ db8500-prcmu-regulators {
+ db8500_vape_reg: db8500_vape {
+ regulator-name = "db8500-vape";
+ };
+
+ db8500_varm_reg: db8500_varm {
+ regulator-name = "db8500-varm";
+ };
+
+ db8500_vmodem_reg: db8500_vmodem {
+ regulator-name = "db8500-vmodem";
+ };
+
+ db8500_vpll_reg: db8500_vpll {
+ regulator-name = "db8500-vpll";
+ };
+
+ db8500_vsmps1_reg: db8500_vsmps1 {
+ regulator-name = "db8500-vsmps1";
+ };
+
+ db8500_vsmps2_reg: db8500_vsmps2 {
+ regulator-name = "db8500-vsmps2";
+ };
+
+ db8500_vsmps3_reg: db8500_vsmps3 {
+ regulator-name = "db8500-vsmps3";
+ };
+
+ db8500_vrf1_reg: db8500_vrf1 {
+ regulator-name = "db8500-vrf1";
+ };
+
+ db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+ regulator-name = "db8500-sva-mmdsp";
+ };
+
+ db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+ regulator-name = "db8500-sva-mmdsp-ret";
+ };
+
+ db8500_sva_pipe_reg: db8500_sva_pipe {
+ regulator-name = "db8500_sva_pipe";
+ };
+
+ db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+ regulator-name = "db8500_sia_mmdsp";
+ };
+
+ db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+ regulator-name = "db8500-sia-mmdsp-ret";
+ };
+
+ db8500_sia_pipe_reg: db8500_sia_pipe {
+ regulator-name = "db8500-sia-pipe";
+ };
+
+ db8500_sga_reg: db8500_sga {
+ regulator-name = "db8500-sga";
+ };
+
+ db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+ regulator-name = "db8500-b2r2-mcde";
+ };
+
+ db8500_esram12_reg: db8500_esram12 {
+ regulator-name = "db8500-esram12";
+ };
+
+ db8500_esram12_ret_reg: db8500_esram12_ret {
+ regulator-name = "db8500-esram12-ret";
+ };
+
+ db8500_esram34_reg: db8500_esram34 {
+ regulator-name = "db8500-esram34";
+ };
+
+ db8500_esram34_ret_reg: db8500_esram34_ret {
+ regulator-name = "db8500-esram34-ret";
+ };
+ };
+
+ ab8500@5 {
+ ab8500-regulators {
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-name = "V-DISPLAY";
+ };
+
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-name = "V-eMMC1";
+ };
+
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-name = "V-MMC-SD";
+ };
+
+ ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ regulator-name = "V-INTCORE";
+ };
+
+ ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ regulator-name = "V-TVOUT";
+ };
+
+ ab8500_ldo_usb_reg: ab8500_ldo_usb {
+ regulator-name = "dummy";
+ };
+
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ regulator-name = "V-AUD";
+ };
+
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ regulator-name = "V-AMIC1";
+ };
+
+ ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ regulator-name = "V-AMIC2";
+ };
+
+ ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ regulator-name = "V-DMIC";
+ };
+
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ regulator-name = "V-CSI/DSI";
+ };
+ };
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+/include/ "href.dtsi"
+/include/ "stuib.dtsi"
+
+/ {
+ model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
+ compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+ gpio_keys {
+ button@1 {
+ gpios = <&tc3589x_gpio 7 0x4>;
+ };
+ };
+
+ soc-u9500 {
+ i2c@80004000 {
+ tps61052@33 {
+ compatible = "tps61052";
+ reg = <0x33>;
+ };
+ };
+
+ i2c@80110000 {
+ bu21013_tp@0x5c {
+ reset-gpio = <&tc3589x_gpio 13 0x4>;
+ };
+ };
+ };
+};
/dts-v1/;
/include/ "dbx5x0.dtsi"
+/include/ "href.dtsi"
+/include/ "stuib.dtsi"
/ {
- model = "ST-Ericsson HREF platform with Device Tree";
- compatible = "st-ericsson,hrefv60+";
+ model = "ST-Ericsson HREF (v60+) platform with Device Tree";
+ compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
- memory {
- reg = <0x00000000 0x20000000>;
+ gpio_keys {
+ button@1 {
+ gpios = <&gpio6 25 0x4>;
+ };
};
soc-u9500 {
- uart@80120000 {
- status = "okay";
- };
-
- uart@80121000 {
- status = "okay";
- };
-
- uart@80007000 {
- status = "okay";
- };
-
- i2c@80004000 {
- tc3589x@42 {
- compatible = "tc3589x";
- reg = <0x42>;
- interrupt-parent = <&gpio6>;
- interrupts = <25 0x1>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
-
- tc3589x_gpio: tc3589x_gpio {
- compatible = "tc3589x-gpio";
- interrupts = <0 0x1>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- };
- };
-
- tps61052@33 {
- compatible = "tps61052";
- reg = <0x33>;
- };
- };
-
- i2c@80128000 {
- lp5521@0x33 {
- compatible = "lp5521";
- reg = <0x33>;
- };
-
- lp5521@0x34 {
- compatible = "lp5521";
- reg = <0x34>;
+ i2c@80110000 {
+ bu21013_tp@0x5c {
+ reset-gpio = <&gpio4 15 0x4>;
};
-
- bh1780@0x29 {
- compatible = "rohm,bh1780gli";
- reg = <0x33>;
- };
- };
-
- sound {
- compatible = "stericsson,snd-soc-mop500";
-
- stericsson,cpu-dai = <&msp1 &msp3>;
- stericsson,audio-codec = <&codec>;
- };
-
- msp1: msp@80124000 {
- status = "okay";
- };
-
- msp3: msp@80125000 {
- status = "okay";
};
};
};
--- /dev/null
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx25.dtsi"
+
+/ {
+ model = "Ka-Ro TX25";
+ compatible = "karo,imx25-tx25", "fsl,imx25";
+
+ memory {
+ reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
+ };
+
+ soc {
+ aips@43f00000 {
+ uart1: serial@43f90000 {
+ status = "okay";
+ };
+ };
+
+ spba@50000000 {
+ fec: ethernet@50038000 {
+ status = "okay";
+ phy-mode = "rmii";
+ };
+ };
+
+ emi@80000000 {
+ nand@bb000000 {
+ nand-on-flash-bbt;
+ status = "okay";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ usb0 = &usbotg;
+ usb1 = &usbhost1;
+ };
+
+ asic: asic-interrupt-controller@68000000 {
+ compatible = "fsl,imx25-asic", "fsl,avic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x68000000 0x8000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&asic>;
+ ranges;
+
+ aips@43f00000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x43f00000 0x100000>;
+ ranges;
+
+ i2c1: i2c@43f80000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+ reg = <0x43f80000 0x4000>;
+ clocks = <&clks 48>;
+ clock-names = "";
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@43f84000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+ reg = <0x43f84000 0x4000>;
+ clocks = <&clks 48>;
+ clock-names = "";
+ interrupts = <10>;
+ status = "disabled";
+ };
+
+ can1: can@43f88000 {
+ compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+ reg = <0x43f88000 0x4000>;
+ interrupts = <43>;
+ clocks = <&clks 75>, <&clks 75>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can2: can@43f8c000 {
+ compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+ reg = <0x43f8c000 0x4000>;
+ interrupts = <44>;
+ clocks = <&clks 76>, <&clks 76>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart1: serial@43f90000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 120>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@43f94000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x43f94000 0x4000>;
+ interrupts = <32>;
+ clocks = <&clks 121>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c2: i2c@43f98000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+ reg = <0x43f98000 0x4000>;
+ clocks = <&clks 48>;
+ clock-names = "";
+ interrupts = <4>;
+ status = "disabled";
+ };
+
+ owire@43f9c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x43f9c000 0x4000>;
+ clocks = <&clks 51>;
+ clock-names = "";
+ interrupts = <2>;
+ status = "disabled";
+ };
+
+ spi1: cspi@43fa4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+ reg = <0x43fa4000 0x4000>;
+ clocks = <&clks 62>;
+ clock-names = "ipg";
+ interrupts = <14>;
+ status = "disabled";
+ };
+
+ kpp@43fa8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x43fa8000 0x4000>;
+ clocks = <&clks 102>;
+ clock-names = "";
+ interrupts = <24>;
+ status = "disabled";
+ };
+
+ iomuxc@43fac000{
+ compatible = "fsl,imx25-iomuxc";
+ reg = <0x43fac000 0x4000>;
+ };
+
+ audmux@43fb0000 {
+ compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
+ reg = <0x43fb0000 0x4000>;
+ status = "disabled";
+ };
+ };
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x40000>;
+ ranges;
+
+ spi3: cspi@50004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+ reg = <0x50004000 0x4000>;
+ interrupts = <0>;
+ clocks = <&clks 80>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ uart4: serial@50008000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x50008000 0x4000>;
+ interrupts = <5>;
+ clocks = <&clks 123>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <18>;
+ clocks = <&clks 122>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ spi2: cspi@50010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+ reg = <0x50010000 0x4000>;
+ clocks = <&clks 79>;
+ clock-names = "ipg";
+ interrupts = <13>;
+ status = "disabled";
+ };
+
+ ssi2: ssi@50014000 {
+ compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+ reg = <0x50014000 0x4000>;
+ interrupts = <11>;
+ status = "disabled";
+ };
+
+ esai@50018000 {
+ reg = <0x50018000 0x4000>;
+ interrupts = <7>;
+ };
+
+ uart5: serial@5002c000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x5002c000 0x4000>;
+ interrupts = <40>;
+ clocks = <&clks 124>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ tsc: tsc@50030000 {
+ compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
+ reg = <0x50030000 0x4000>;
+ interrupts = <46>;
+ clocks = <&clks 119>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ ssi1: ssi@50034000 {
+ compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+ reg = <0x50034000 0x4000>;
+ interrupts = <12>;
+ status = "disabled";
+ };
+
+ fec: ethernet@50038000 {
+ compatible = "fsl,imx25-fec";
+ reg = <0x50038000 0x4000>;
+ interrupts = <57>;
+ clocks = <&clks 88>, <&clks 65>;
+ clock-names = "ipg", "ahb";
+ status = "disabled";
+ };
+ };
+
+ aips@53f00000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x53f00000 0x100000>;
+ ranges;
+
+ clks: ccm@53f80000 {
+ compatible = "fsl,imx25-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ gpt4: timer@53f84000 {
+ compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+ reg = <0x53f84000 0x4000>;
+ clocks = <&clks 9>, <&clks 45>;
+ clock-names = "ipg", "per";
+ interrupts = <1>;
+ };
+
+ gpt3: timer@53f88000 {
+ compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+ reg = <0x53f88000 0x4000>;
+ clocks = <&clks 9>, <&clks 47>;
+ clock-names = "ipg", "per";
+ interrupts = <29>;
+ };
+
+ gpt2: timer@53f8c000 {
+ compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+ reg = <0x53f8c000 0x4000>;
+ clocks = <&clks 9>, <&clks 47>;
+ clock-names = "ipg", "per";
+ interrupts = <53>;
+ };
+
+ gpt1: timer@53f90000 {
+ compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+ reg = <0x53f90000 0x4000>;
+ clocks = <&clks 9>, <&clks 47>;
+ clock-names = "ipg", "per";
+ interrupts = <54>;
+ };
+
+ epit1: timer@53f94000 {
+ compatible = "fsl,imx25-epit";
+ reg = <0x53f94000 0x4000>;
+ interrupts = <28>;
+ };
+
+ epit2: timer@53f98000 {
+ compatible = "fsl,imx25-epit";
+ reg = <0x53f98000 0x4000>;
+ interrupts = <27>;
+ };
+
+ gpio4: gpio@53f9c000 {
+ compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+ reg = <0x53f9c000 0x4000>;
+ interrupts = <23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pwm2: pwm@53fa0000 {
+ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ #pwm-cells = <2>;
+ reg = <0x53fa0000 0x4000>;
+ clocks = <&clks 106>, <&clks 36>;
+ clock-names = "ipg", "per";
+ interrupts = <36>;
+ };
+
+ gpio3: gpio@53fa4000 {
+ compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+ reg = <0x53fa4000 0x4000>;
+ interrupts = <16>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pwm3: pwm@53fa8000 {
+ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ #pwm-cells = <2>;
+ reg = <0x53fa8000 0x4000>;
+ clocks = <&clks 107>, <&clks 36>;
+ clock-names = "ipg", "per";
+ interrupts = <41>;
+ };
+
+ esdhc1: esdhc@53fb4000 {
+ compatible = "fsl,imx25-esdhc";
+ reg = <0x53fb4000 0x4000>;
+ interrupts = <9>;
+ clocks = <&clks 86>, <&clks 63>, <&clks 45>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ esdhc2: esdhc@53fb8000 {
+ compatible = "fsl,imx25-esdhc";
+ reg = <0x53fb8000 0x4000>;
+ interrupts = <8>;
+ clocks = <&clks 87>, <&clks 64>, <&clks 46>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ lcdc@53fbc000 {
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <39>;
+ clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ slcdc@53fc0000 {
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <38>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@53fc8000 {
+ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ reg = <0x53fc8000 0x4000>;
+ clocks = <&clks 108>, <&clks 36>;
+ clock-names = "ipg", "per";
+ interrupts = <42>;
+ };
+
+ gpio1: gpio@53fcc000 {
+ compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+ reg = <0x53fcc000 0x4000>;
+ interrupts = <52>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@53fd0000 {
+ compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+ reg = <0x53fd0000 0x4000>;
+ interrupts = <51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sdma@53fd4000 {
+ compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
+ reg = <0x53fd4000 0x4000>;
+ clocks = <&clks 112>, <&clks 68>;
+ clock-names = "ipg", "ahb";
+ interrupts = <34>;
+ };
+
+ wdog@53fdc000 {
+ compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
+ reg = <0x53fdc000 0x4000>;
+ clocks = <&clks 126>;
+ clock-names = "";
+ interrupts = <55>;
+ };
+
+ pwm1: pwm@53fe0000 {
+ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ #pwm-cells = <2>;
+ reg = <0x53fe0000 0x4000>;
+ clocks = <&clks 105>, <&clks 36>;
+ clock-names = "ipg", "per";
+ interrupts = <26>;
+ };
+
+ usbphy1: usbphy@1 {
+ compatible = "nop-usbphy";
+ status = "disabled";
+ };
+
+ usbphy2: usbphy@2 {
+ compatible = "nop-usbphy";
+ status = "disabled";
+ };
+
+ usbotg: usb@53ff4000 {
+ compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+ reg = <0x53ff4000 0x0200>;
+ interrupts = <37>;
+ clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,usbmisc = <&usbmisc 0>;
+ status = "disabled";
+ };
+
+ usbhost1: usb@53ff4400 {
+ compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+ reg = <0x53ff4400 0x0200>;
+ interrupts = <35>;
+ clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,usbmisc = <&usbmisc 1>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@53ff4600 {
+ #index-cells = <1>;
+ compatible = "fsl,imx25-usbmisc";
+ clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+ clock-names = "ipg", "ahb", "per";
+ reg = <0x53ff4600 0x00f>;
+ status = "disabled";
+ };
+
+ dryice@53ffc000 {
+ compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
+ reg = <0x53ffc000 0x4000>;
+ clocks = <&clks 81>;
+ clock-names = "ipg";
+ interrupts = <25>;
+ };
+ };
+
+ emi@80000000 {
+ compatible = "fsl,emi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x3b002000>;
+ ranges;
+
+ nand@bb000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "fsl,imx25-nand";
+ reg = <0xbb000000 0x2000>;
+ clocks = <&clks 50>;
+ clock-names = "";
+ interrupts = <33>;
+ status = "disabled";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
+ * Copyright 2012 Armadeus Systems <support@armadeus.com>
+ *
+ * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx27.dtsi"
+
+/ {
+ model = "Armadeus Systems APF27 module";
+ compatible = "armadeus,imx27-apf27", "fsl,imx27";
+
+ memory {
+ reg = <0xa0000000 0x04000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc26m {
+ compatible = "fsl,imx-osc26m", "fixed-clock";
+ clock-frequency = <0>;
+ };
+ };
+
+ soc {
+ aipi@10000000 {
+ serial@1000a000 {
+ status = "okay";
+ };
+
+ ethernet@1002b000 {
+ status = "okay";
+ };
+ };
+
+ nand@d8000000 {
+ status = "okay";
+ nand-bus-width = <16>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "env";
+ reg = <0x100000 0x80000>;
+ };
+
+ partition@180000 {
+ label = "env2";
+ reg = <0x180000 0x80000>;
+ };
+
+ partition@200000 {
+ label = "firmware";
+ reg = <0x200000 0x80000>;
+ };
+
+ partition@280000 {
+ label = "dtb";
+ reg = <0x280000 0x80000>;
+ };
+
+ partition@300000 {
+ label = "kernel";
+ reg = <0x300000 0x500000>;
+ };
+
+ partition@800000 {
+ label = "rootfs";
+ reg = <0x800000 0xf800000>;
+ };
+ };
+ };
+};
i2c1: i2c@10012000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
reg = <0x10012000 0x1000>;
interrupts = <12>;
status = "disabled";
i2c2: i2c@1001d000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
reg = <0x1001d000 0x1000>;
interrupts = <1>;
status = "disabled";
i2c@83fc4000 { /* I2C2 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc4000 0x4000>;
interrupts = <63>;
status = "disabled";
i2c@83fc8000 { /* I2C1 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc8000 0x4000>;
interrupts = <62>;
status = "disabled";
i2c@53fec000 { /* I2C3 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x53fec000 0x4000>;
interrupts = <64>;
status = "disabled";
i2c@63fc4000 { /* I2C2 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
status = "disabled";
i2c@63fc8000 { /* I2C1 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
status = "disabled";
i2c@021a0000 { /* I2C1 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <0 36 0x04>;
clocks = <&clks 125>;
i2c@021a4000 { /* I2C2 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a4000 0x4000>;
interrupts = <0 37 0x04>;
clocks = <&clks 126>;
i2c@021a8000 { /* I2C3 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a8000 0x4000>;
interrupts = <0 38 0x04>;
clocks = <&clks 127>;
/ {
compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
+ interrupt-parent = <&intc>;
aliases {
serial0 = &uart1;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
+
+ timer2: timer@4802a000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4802a000 0x400>;
+ interrupts = <38>;
+ ti,hwmods = "timer2";
+ };
+
+ timer3: timer@48078000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48078000 0x400>;
+ interrupts = <39>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@4807a000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4807a000 0x400>;
+ interrupts = <40>;
+ ti,hwmods = "timer4";
+ };
+
+ timer5: timer@4807c000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4807c000 0x400>;
+ interrupts = <41>;
+ ti,hwmods = "timer5";
+ ti,timer-dsp;
+ };
+
+ timer6: timer@4807e000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4807e000 0x400>;
+ interrupts = <42>;
+ ti,hwmods = "timer6";
+ ti,timer-dsp;
+ };
+
+ timer7: timer@48080000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48080000 0x400>;
+ interrupts = <43>;
+ ti,hwmods = "timer7";
+ ti,timer-dsp;
+ };
+
+ timer8: timer@48082000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48082000 0x400>;
+ interrupts = <44>;
+ ti,hwmods = "timer8";
+ ti,timer-dsp;
+ };
+
+ timer9: timer@48084000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48084000 0x400>;
+ interrupts = <45>;
+ ti,hwmods = "timer9";
+ ti,timer-pwm;
+ };
+
+ timer10: timer@48086000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48086000 0x400>;
+ interrupts = <46>;
+ ti,hwmods = "timer10";
+ ti,timer-pwm;
+ };
+
+ timer11: timer@48088000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48088000 0x400>;
+ interrupts = <47>;
+ ti,hwmods = "timer11";
+ ti,timer-pwm;
+ };
+
+ timer12: timer@4808a000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4808a000 0x400>;
+ interrupts = <48>;
+ ti,hwmods = "timer12";
+ ti,timer-pwm;
+ };
};
};
compatible = "ti,omap2420", "ti,omap2";
ocp {
+ counter32k: counter@48004000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x48004000 0x20>;
+ ti,hwmods = "counter_32k";
+ };
+
omap2420_pmx: pinmux@48000030 {
compatible = "ti,omap2420-padconf", "pinctrl-single";
reg = <0x48000030 0x0113>;
interrupts = <59>, /* TX interrupt */
<60>; /* RX interrupt */
interrupt-names = "tx", "rx";
- interrupt-parent = <&intc>;
ti,hwmods = "mcbsp1";
};
interrupts = <62>, /* TX interrupt */
<63>; /* RX interrupt */
interrupt-names = "tx", "rx";
- interrupt-parent = <&intc>;
ti,hwmods = "mcbsp2";
};
+
+ timer1: timer@48028000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48028000 0x400>;
+ interrupts = <37>;
+ ti,hwmods = "timer1";
+ ti,timer-alwon;
+ };
};
};
compatible = "ti,omap2430", "ti,omap2";
ocp {
+ counter32k: counter@49020000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x49020000 0x20>;
+ ti,hwmods = "counter_32k";
+ };
+
omap2430_pmx: pinmux@49002030 {
compatible = "ti,omap2430-padconf", "pinctrl-single";
reg = <0x49002030 0x0154>;
<60>, /* RX interrupt */
<61>; /* RX overflow interrupt */
interrupt-names = "common", "tx", "rx", "rx_overflow";
- interrupt-parent = <&intc>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
};
<62>, /* TX interrupt */
<63>; /* RX interrupt */
interrupt-names = "common", "tx", "rx";
- interrupt-parent = <&intc>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp2";
};
<89>, /* TX interrupt */
<90>; /* RX interrupt */
interrupt-names = "common", "tx", "rx";
- interrupt-parent = <&intc>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3";
};
<54>, /* TX interrupt */
<55>; /* RX interrupt */
interrupt-names = "common", "tx", "rx";
- interrupt-parent = <&intc>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp4";
};
<81>, /* TX interrupt */
<82>; /* RX interrupt */
interrupt-names = "common", "tx", "rx";
- interrupt-parent = <&intc>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp5";
};
+
+ timer1: timer@49018000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x49018000 0x400>;
+ interrupts = <37>;
+ ti,hwmods = "timer1";
+ ti,timer-alwon;
+ };
};
};
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
- vsim: regulator-vsim {
- compatible = "ti,twl4030-vsim";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
-
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ model = "TI OMAP3 BeagleBoard";
+ compatible = "ti,omap3-beagle", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pmu_stat {
+ label = "beagleboard::pmu_stat";
+ gpios = <&twl_gpio 19 0>; /* LEDB */
+ };
+
+ heartbeat {
+ label = "beagleboard::usr0";
+ gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+ linux,default-trigger = "heartbeat";
+ };
+
+ mmc {
+ label = "beagleboard::usr1";
+ gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
/ {
compatible = "ti,omap3430", "ti,omap3";
+ interrupt-parent = <&intc>;
aliases {
serial0 = &uart1;
ranges;
ti,hwmods = "l3_main";
+ counter32k: counter@48320000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x48320000 0x20>;
+ ti,hwmods = "counter_32k";
+ };
+
intc: interrupt-controller@48200000 {
compatible = "ti,omap2-intc";
interrupt-controller;
<59>, /* TX interrupt */
<60>; /* RX interrupt */
interrupt-names = "common", "tx", "rx";
- interrupt-parent = <&intc>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
};
<63>, /* RX interrupt */
<4>; /* Sidetone */
interrupt-names = "common", "tx", "rx", "sidetone";
- interrupt-parent = <&intc>;
ti,buffer-size = <1280>;
ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
};
<90>, /* RX interrupt */
<5>; /* Sidetone */
interrupt-names = "common", "tx", "rx", "sidetone";
- interrupt-parent = <&intc>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
};
<54>, /* TX interrupt */
<55>; /* RX interrupt */
interrupt-names = "common", "tx", "rx";
- interrupt-parent = <&intc>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp4";
};
<81>, /* TX interrupt */
<82>; /* RX interrupt */
interrupt-names = "common", "tx", "rx";
- interrupt-parent = <&intc>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp5";
};
+
+ timer1: timer@48318000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48318000 0x400>;
+ interrupts = <37>;
+ ti,hwmods = "timer1";
+ ti,timer-alwon;
+ };
+
+ timer2: timer@49032000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x49032000 0x400>;
+ interrupts = <38>;
+ ti,hwmods = "timer2";
+ };
+
+ timer3: timer@49034000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x49034000 0x400>;
+ interrupts = <39>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@49036000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x49036000 0x400>;
+ interrupts = <40>;
+ ti,hwmods = "timer4";
+ };
+
+ timer5: timer@49038000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x49038000 0x400>;
+ interrupts = <41>;
+ ti,hwmods = "timer5";
+ ti,timer-dsp;
+ };
+
+ timer6: timer@4903a000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4903a000 0x400>;
+ interrupts = <42>;
+ ti,hwmods = "timer6";
+ ti,timer-dsp;
+ };
+
+ timer7: timer@4903c000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4903c000 0x400>;
+ interrupts = <43>;
+ ti,hwmods = "timer7";
+ ti,timer-dsp;
+ };
+
+ timer8: timer@4903e000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4903e000 0x400>;
+ interrupts = <44>;
+ ti,hwmods = "timer8";
+ ti,timer-pwm;
+ ti,timer-dsp;
+ };
+
+ timer9: timer@49040000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x49040000 0x400>;
+ interrupts = <45>;
+ ti,hwmods = "timer9";
+ ti,timer-pwm;
+ };
+
+ timer10: timer@48086000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48086000 0x400>;
+ interrupts = <46>;
+ ti,hwmods = "timer10";
+ ti,timer-pwm;
+ };
+
+ timer11: timer@48088000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48088000 0x400>;
+ interrupts = <47>;
+ ti,hwmods = "timer11";
+ ti,timer-pwm;
+ };
+
+ timer12: timer@48304000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48304000 0x400>;
+ interrupts = <95>;
+ ti,hwmods = "timer12";
+ ti,timer-alwon;
+ ti,timer-secure;
+ };
};
};
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/include/ "omap4-panda.dts"
+
+/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+ 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */
+ 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+ >;
+};
"AFML", "Line In",
"AFMR", "Line In";
};
+
+/* PandaboardES has external pullups on SCL & SDA */
+&dss_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+ 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */
+ 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+ >;
+};
&twl6040_pins
&mcpdm_pins
&mcbsp1_pins
+ &dss_hdmi_pins
+ &tpd12s015_pins
>;
twl6040_pins: pinmux_twl6040_pins {
0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
>;
};
+
+ dss_hdmi_pins: pinmux_dss_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+ 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
+ 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+ >;
+ };
+
+ tpd12s015_pins: pinmux_tpd12s015_pins {
+ pinctrl-single,pins = <
+ 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
+ 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
+ 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+ >;
+ };
};
&i2c1 {
&dmic {
status = "disabled";
};
+
+&twl_usb_comparator {
+ usb-supply = <&vusb>;
+};
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/include/ "omap4-sdp.dts"
+
+/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+ 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */
+ 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+ >;
+};
&dmic_pins
&mcbsp1_pins
&mcbsp2_pins
+ &dss_hdmi_pins
+ &tpd12s015_pins
>;
uart2_pins: pinmux_uart2_pins {
0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
>;
};
+
+ dss_hdmi_pins: pinmux_dss_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+ 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
+ 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+ >;
+ };
+
+ tpd12s015_pins: pinmux_tpd12s015_pins {
+ pinctrl-single,pins = <
+ 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
+ 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
+ 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+ >;
+ };
};
&i2c1 {
&mcbsp3 {
status = "disabled";
};
+
+&twl_usb_comparator {
+ usb-supply = <&vusb>;
+};
ranges;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+ counter32k: counter@4a304000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4a304000 0x20>;
+ ti,hwmods = "counter_32k";
+ };
+
omap4_pmx_core: pinmux@4a100040 {
compatible = "ti,omap4-padconf", "pinctrl-single";
reg = <0x4a100040 0x0196>;
<0x49032000 0x7f>; /* L3 Interconnect */
reg-names = "mpu", "dma";
interrupts = <0 112 0x4>;
- interrupt-parent = <&gic>;
ti,hwmods = "mcpdm";
};
<0x4902e000 0x7f>; /* L3 Interconnect */
reg-names = "mpu", "dma";
interrupts = <0 114 0x4>;
- interrupt-parent = <&gic>;
ti,hwmods = "dmic";
};
reg-names = "mpu", "dma";
interrupts = <0 17 0x4>;
interrupt-names = "common";
- interrupt-parent = <&gic>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
};
reg-names = "mpu", "dma";
interrupts = <0 22 0x4>;
interrupt-names = "common";
- interrupt-parent = <&gic>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp2";
};
reg-names = "mpu", "dma";
interrupts = <0 23 0x4>;
interrupt-names = "common";
- interrupt-parent = <&gic>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3";
};
reg-names = "mpu";
interrupts = <0 16 0x4>;
interrupt-names = "common";
- interrupt-parent = <&gic>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp4";
};
hw-caps-temp-alert;
};
- ocp2scp {
+ ocp2scp@4a0ad000 {
compatible = "ti,omap-ocp2scp";
+ reg = <0x4a0ad000 0x1f>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
ti,hwmods = "ocp2scp_usb_phy";
};
+
+ timer1: timer@4a318000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4a318000 0x80>;
+ interrupts = <0 37 0x4>;
+ ti,hwmods = "timer1";
+ ti,timer-alwon;
+ };
+
+ timer2: timer@48032000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48032000 0x80>;
+ interrupts = <0 38 0x4>;
+ ti,hwmods = "timer2";
+ };
+
+ timer3: timer@48034000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48034000 0x80>;
+ interrupts = <0 39 0x4>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@48036000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48036000 0x80>;
+ interrupts = <0 40 0x4>;
+ ti,hwmods = "timer4";
+ };
+
+ timer5: timer@40138000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x40138000 0x80>,
+ <0x49038000 0x80>;
+ interrupts = <0 41 0x4>;
+ ti,hwmods = "timer5";
+ ti,timer-dsp;
+ };
+
+ timer6: timer@4013a000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4013a000 0x80>,
+ <0x4903a000 0x80>;
+ interrupts = <0 42 0x4>;
+ ti,hwmods = "timer6";
+ ti,timer-dsp;
+ };
+
+ timer7: timer@4013c000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4013c000 0x80>,
+ <0x4903c000 0x80>;
+ interrupts = <0 43 0x4>;
+ ti,hwmods = "timer7";
+ ti,timer-dsp;
+ };
+
+ timer8: timer@4013e000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4013e000 0x80>,
+ <0x4903e000 0x80>;
+ interrupts = <0 44 0x4>;
+ ti,hwmods = "timer8";
+ ti,timer-pwm;
+ ti,timer-dsp;
+ };
+
+ timer9: timer@4803e000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4803e000 0x80>;
+ interrupts = <0 45 0x4>;
+ ti,hwmods = "timer9";
+ ti,timer-pwm;
+ };
+
+ timer10: timer@48086000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48086000 0x80>;
+ interrupts = <0 46 0x4>;
+ ti,hwmods = "timer10";
+ ti,timer-pwm;
+ };
+
+ timer11: timer@48088000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48088000 0x80>;
+ interrupts = <0 47 0x4>;
+ ti,hwmods = "timer11";
+ ti,timer-pwm;
+ };
};
};
/dts-v1/;
/include/ "omap5.dtsi"
+/include/ "samsung_k3pe0e000b.dtsi"
/ {
model = "TI OMAP5 EVM board";
memory {
device_type = "memory";
- reg = <0x80000000 0x40000000>; /* 1 GB */
+ reg = <0x80000000 0x80000000>; /* 2 GB */
};
vmmcsd_fixed: fixedregulator-mmcsd {
&mcbsp3 {
status = "disabled";
};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&samsung_K3PE0E000B>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&samsung_K3PE0E000B>;
+};
ranges;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+ counter32k: counter@4ae04000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4ae04000 0x40>;
+ ti,hwmods = "counter_32k";
+ };
+
omap5_pmx_core: pinmux@4a002840 {
compatible = "ti,omap4-padconf", "pinctrl-single";
reg = <0x4a002840 0x01b6>;
gpio1: gpio@4ae10000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4ae10000 0x200>;
+ interrupts = <0 29 0x4>;
ti,hwmods = "gpio1";
gpio-controller;
#gpio-cells = <2>;
gpio2: gpio@48055000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48055000 0x200>;
+ interrupts = <0 30 0x4>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
gpio3: gpio@48057000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48057000 0x200>;
+ interrupts = <0 31 0x4>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
gpio4: gpio@48059000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48059000 0x200>;
+ interrupts = <0 32 0x4>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
gpio5: gpio@4805b000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4805b000 0x200>;
+ interrupts = <0 33 0x4>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
gpio6: gpio@4805d000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4805d000 0x200>;
+ interrupts = <0 34 0x4>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
gpio7: gpio@48051000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48051000 0x200>;
+ interrupts = <0 35 0x4>;
ti,hwmods = "gpio7";
gpio-controller;
#gpio-cells = <2>;
gpio8: gpio@48053000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48053000 0x200>;
+ interrupts = <0 121 0x4>;
ti,hwmods = "gpio8";
gpio-controller;
#gpio-cells = <2>;
i2c1: i2c@48070000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48070000 0x100>;
+ interrupts = <0 56 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
i2c2: i2c@48072000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48072000 0x100>;
+ interrupts = <0 57 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
i2c3: i2c@48060000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48060000 0x100>;
+ interrupts = <0 61 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
};
- i2c4: i2c@4807A000 {
+ i2c4: i2c@4807a000 {
compatible = "ti,omap4-i2c";
+ reg = <0x4807a000 0x100>;
+ interrupts = <0 62 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
};
- i2c5: i2c@4807C000 {
+ i2c5: i2c@4807c000 {
compatible = "ti,omap4-i2c";
+ reg = <0x4807c000 0x100>;
+ interrupts = <0 60 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c5";
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806a000 0x100>;
+ interrupts = <0 72 0x4>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806c000 0x100>;
+ interrupts = <0 73 0x4>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
+ reg = <0x48020000 0x100>;
+ interrupts = <0 74 0x4>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806e000 0x100>;
+ interrupts = <0 70 0x4>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
uart5: serial@48066000 {
- compatible = "ti,omap5-uart";
+ compatible = "ti,omap4-uart";
+ reg = <0x48066000 0x100>;
+ interrupts = <0 105 0x4>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
};
uart6: serial@48068000 {
- compatible = "ti,omap6-uart";
+ compatible = "ti,omap4-uart";
+ reg = <0x48068000 0x100>;
+ interrupts = <0 106 0x4>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
};
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x4809c000 0x400>;
+ interrupts = <0 83 0x4>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480b4000 0x400>;
+ interrupts = <0 86 0x4>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
};
mmc3: mmc@480ad000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480ad000 0x400>;
+ interrupts = <0 94 0x4>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
};
mmc4: mmc@480d1000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480d1000 0x400>;
+ interrupts = <0 96 0x4>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
};
mmc5: mmc@480d5000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480d5000 0x400>;
+ interrupts = <0 59 0x4>;
ti,hwmods = "mmc5";
ti,needs-special-reset;
};
<0x49032000 0x7f>; /* L3 Interconnect */
reg-names = "mpu", "dma";
interrupts = <0 112 0x4>;
- interrupt-parent = <&gic>;
ti,hwmods = "mcpdm";
};
<0x4902e000 0x7f>; /* L3 Interconnect */
reg-names = "mpu", "dma";
interrupts = <0 114 0x4>;
- interrupt-parent = <&gic>;
ti,hwmods = "dmic";
};
reg-names = "mpu", "dma";
interrupts = <0 17 0x4>;
interrupt-names = "common";
- interrupt-parent = <&gic>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
};
reg-names = "mpu", "dma";
interrupts = <0 22 0x4>;
interrupt-names = "common";
- interrupt-parent = <&gic>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp2";
};
reg-names = "mpu", "dma";
interrupts = <0 23 0x4>;
interrupt-names = "common";
- interrupt-parent = <&gic>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3";
};
+
+ timer1: timer@4ae18000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4ae18000 0x80>;
+ interrupts = <0 37 0x4>;
+ ti,hwmods = "timer1";
+ ti,timer-alwon;
+ };
+
+ timer2: timer@48032000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48032000 0x80>;
+ interrupts = <0 38 0x4>;
+ ti,hwmods = "timer2";
+ };
+
+ timer3: timer@48034000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48034000 0x80>;
+ interrupts = <0 39 0x4>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@48036000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48036000 0x80>;
+ interrupts = <0 40 0x4>;
+ ti,hwmods = "timer4";
+ };
+
+ timer5: timer@40138000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x40138000 0x80>,
+ <0x49038000 0x80>;
+ interrupts = <0 41 0x4>;
+ ti,hwmods = "timer5";
+ ti,timer-dsp;
+ };
+
+ timer6: timer@4013a000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4013a000 0x80>,
+ <0x4903a000 0x80>;
+ interrupts = <0 42 0x4>;
+ ti,hwmods = "timer6";
+ ti,timer-dsp;
+ ti,timer-pwm;
+ };
+
+ timer7: timer@4013c000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4013c000 0x80>,
+ <0x4903c000 0x80>;
+ interrupts = <0 43 0x4>;
+ ti,hwmods = "timer7";
+ ti,timer-dsp;
+ };
+
+ timer8: timer@4013e000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4013e000 0x80>,
+ <0x4903e000 0x80>;
+ interrupts = <0 44 0x4>;
+ ti,hwmods = "timer8";
+ ti,timer-dsp;
+ ti,timer-pwm;
+ };
+
+ timer9: timer@4803e000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4803e000 0x80>;
+ interrupts = <0 45 0x4>;
+ ti,hwmods = "timer9";
+ };
+
+ timer10: timer@48086000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48086000 0x80>;
+ interrupts = <0 46 0x4>;
+ ti,hwmods = "timer10";
+ };
+
+ timer11: timer@48088000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48088000 0x80>;
+ interrupts = <0 47 0x4>;
+ ti,hwmods = "timer11";
+ ti,timer-pwm;
+ };
+
+ emif1: emif@0x4c000000 {
+ compatible = "ti,emif-4d5";
+ ti,hwmods = "emif1";
+ phy-type = <2>; /* DDR PHY type: Intelli PHY */
+ reg = <0x4c000000 0x400>;
+ interrupts = <0 110 0x4>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+
+ emif2: emif@0x4d000000 {
+ compatible = "ti,emif-4d5";
+ ti,hwmods = "emif2";
+ phy-type = <2>; /* DDR PHY type: Intelli PHY */
+ reg = <0x4d000000 0x400>;
+ interrupts = <0 111 0x4>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
};
--- /dev/null
+/*
+ * Timings and Geometry for Samsung K3PE0E000B memory part
+ */
+
+/ {
+ samsung_K3PE0E000B: lpddr2 {
+ compatible = "Samsung,K3PE0E000B","jedec,lpddr2-s4";
+ density = <4096>;
+ io-width = <32>;
+
+ tRPab-min-tck = <3>;
+ tRCD-min-tck = <3>;
+ tWR-min-tck = <3>;
+ tRASmin-min-tck = <3>;
+ tRRD-min-tck = <2>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tCKE-min-tck = <3>;
+ tCKESR-min-tck = <3>;
+ tFAW-min-tck = <8>;
+
+ timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <533333333>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+
+ timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <266666666>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+ };
+};
/ {
model = "Calao Systems Snowball platform with device tree";
- compatible = "calaosystems,snowball-a9500";
+ compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
memory {
reg = <0x00000000 0x20000000>;
};
// External Micro SD slot
- sdi@80126000 {
+ sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>;
- bus-width = <8>;
+ bus-width = <4>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
};
// On-board eMMC
- sdi@80114000 {
+ sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>;
bus-width = <8>;
reg = <0x33>;
};
};
+
+ prcmu@80157000 {
+ db8500-prcmu-regulators {
+ db8500_vape_reg: db8500_vape {
+ regulator-name = "db8500-vape";
+ };
+
+ db8500_varm_reg: db8500_varm {
+ regulator-name = "db8500-varm";
+ };
+
+ db8500_vmodem_reg: db8500_vmodem {
+ regulator-name = "db8500-vmodem";
+ };
+
+ db8500_vpll_reg: db8500_vpll {
+ regulator-name = "db8500-vpll";
+ };
+
+ db8500_vsmps1_reg: db8500_vsmps1 {
+ regulator-name = "db8500-vsmps1";
+ };
+
+ db8500_vsmps2_reg: db8500_vsmps2 {
+ regulator-name = "db8500-vsmps2";
+ };
+
+ db8500_vsmps3_reg: db8500_vsmps3 {
+ regulator-name = "db8500-vsmps3";
+ };
+
+ db8500_vrf1_reg: db8500_vrf1 {
+ regulator-name = "db8500-vrf1";
+ };
+
+ db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+ regulator-name = "db8500-sva-mmdsp";
+ };
+
+ db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+ regulator-name = "db8500-sva-mmdsp-ret";
+ };
+
+ db8500_sva_pipe_reg: db8500_sva_pipe {
+ regulator-name = "db8500_sva_pipe";
+ };
+
+ db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+ regulator-name = "db8500_sia_mmdsp";
+ };
+
+ db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+ regulator-name = "db8500-sia-mmdsp-ret";
+ };
+
+ db8500_sia_pipe_reg: db8500_sia_pipe {
+ regulator-name = "db8500-sia-pipe";
+ };
+
+ db8500_sga_reg: db8500_sga {
+ regulator-name = "db8500-sga";
+ };
+
+ db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+ regulator-name = "db8500-b2r2-mcde";
+ };
+
+ db8500_esram12_reg: db8500_esram12 {
+ regulator-name = "db8500-esram12";
+ };
+
+ db8500_esram12_ret_reg: db8500_esram12_ret {
+ regulator-name = "db8500-esram12-ret";
+ };
+
+ db8500_esram34_reg: db8500_esram34 {
+ regulator-name = "db8500-esram34";
+ };
+
+ db8500_esram34_ret_reg: db8500_esram34_ret {
+ regulator-name = "db8500-esram34-ret";
+ };
+ };
+
+ ab8500@5 {
+ ab8500-regulators {
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-name = "V-DISPLAY";
+ };
+
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-name = "V-eMMC1";
+ };
+
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-name = "V-MMC-SD";
+ };
+
+ ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ regulator-name = "V-INTCORE";
+ };
+
+ ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ regulator-name = "V-TVOUT";
+ };
+
+ ab8500_ldo_usb_reg: ab8500_ldo_usb {
+ regulator-name = "dummy";
+ };
+
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ regulator-name = "V-AUD";
+ };
+
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ regulator-name = "V-AMIC1";
+ };
+
+ ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ regulator-name = "V-AMIC2";
+ };
+
+ ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ regulator-name = "V-DMIC";
+ };
+
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ regulator-name = "V-CSI/DSI";
+ };
+ };
+ };
+ };
};
};
--- /dev/null
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ soc-u9500 {
+ i2c@80004000 {
+ stmpe1601: stmpe1601@40 {
+ compatible = "st,stmpe1601";
+ reg = <0x40>;
+ interrupts = <26 0x1>;
+ interrupt-parent = <&gpio6>;
+ interrupt-controller;
+
+ wakeup-source;
+ st,autosleep-timeout = <1024>;
+
+ stmpe_keypad {
+ compatible = "st,stmpe-keypad";
+
+ debounce-interval = <64>;
+ st,scan-count = <8>;
+ st,no-autorepeat;
+
+ linux,keymap = <0x205006b
+ 0x4010074
+ 0x3050072
+ 0x1030004
+ 0x502006a
+ 0x500000a
+ 0x5008b
+ 0x706001c
+ 0x405000b
+ 0x6070003
+ 0x3040067
+ 0x303006c
+ 0x60400e7
+ 0x602009e
+ 0x4020073
+ 0x5050002
+ 0x4030069
+ 0x3020008>;
+ };
+ };
+ };
+
+ i2c@80110000 {
+ bu21013_tp@0x5c {
+ compatible = "rhom,bu21013_tp";
+ reg = <0x5c>;
+ touch-gpio = <&gpio2 20 0x4>;
+ avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+ rhom,touch-max-x = <384>;
+ rhom,touch-max-y = <704>;
+ rhom,flip-y;
+ };
+
+ bu21013_tp@0x5d {
+ compatible = "rhom,bu21013_tp";
+ reg = <0x5d>;
+ touch-gpio = <&gpio2 20 0x4>;
+ avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+ rhom,touch-max-x = <384>;
+ rhom,touch-max-y = <704>;
+ rhom,flip-y;
+ };
+ };
+ };
+};
regulator-max-microvolt = <3150000>;
};
+ vusb1v5: regulator-vusb1v5 {
+ compatible = "ti,twl4030-vusb1v5";
+ };
+
+ vusb1v8: regulator-vusb1v8 {
+ compatible = "ti,twl4030-vusb1v8";
+ };
+
+ vusb3v1: regulator-vusb3v1 {
+ compatible = "ti,twl4030-vusb3v1";
+ };
+
+ vsim: regulator-vsim {
+ compatible = "ti,twl4030-vsim";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
twl_gpio: gpio {
compatible = "ti,twl4030-gpio";
gpio-controller;
interrupt-controller;
#interrupt-cells = <1>;
};
+
+ twl4030-usb {
+ compatible = "ti,twl4030-usb";
+ interrupts = <10>, <4>;
+ usb1v5-supply = <&vusb1v5>;
+ usb1v8-supply = <&vusb1v8>;
+ usb3v1-supply = <&vusb3v1>;
+ usb_mode = <1>;
+ };
};
clk32kg: regulator-clk32kg {
compatible = "ti,twl6030-clk32kg";
};
+
+ twl_usb_comparator: usb-comparator {
+ compatible = "ti,twl6030-usb";
+ interrupts = <4>, <10>;
+ };
};
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MXC=y
-CONFIG_ARCH_IMX_V4_V5=y
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
CONFIG_MACH_APF9328=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MXC=y
+CONFIG_ARCH_MULTI_V6=y
+CONFIG_ARCH_MULTI_V7=y
CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_MX31LITE=y
CONFIG_MACH_PCM037=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_GADGET=y
CONFIG_AB8500_USB=y
static inline void __raw_writew(u16 val, volatile void __iomem *addr)
{
asm volatile("strh %1, %0"
- : "+Qo" (*(volatile u16 __force *)addr)
+ : "+Q" (*(volatile u16 __force *)addr)
: "r" (val));
}
{
u16 val;
asm volatile("ldrh %1, %0"
- : "+Qo" (*(volatile u16 __force *)addr),
+ : "+Q" (*(volatile u16 __force *)addr),
"=r" (val));
return val;
}
extern void sched_clock_postinit(void);
extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
-extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
- unsigned long rate);
#endif
#if __LINUX_ARM_ARCH__ <= 6
ldr \tmp, =elf_hwcap @ may not have MVFR regs
ldr \tmp, [\tmp, #0]
- tst \tmp, #HWCAP_VFPv3D16
- ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31}
- addne \base, \base, #32*4 @ step over unused register space
+ tst \tmp, #HWCAP_VFPD32
+ ldcnel p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31}
+ addeq \base, \base, #32*4 @ step over unused register space
#else
VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0
and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field
#if __LINUX_ARM_ARCH__ <= 6
ldr \tmp, =elf_hwcap @ may not have MVFR regs
ldr \tmp, [\tmp, #0]
- tst \tmp, #HWCAP_VFPv3D16
- stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31}
- addne \base, \base, #32*4 @ step over unused register space
+ tst \tmp, #HWCAP_VFPD32
+ stcnel p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31}
+ addeq \base, \base, #32*4 @ step over unused register space
#else
VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0
and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field
* published by the Free Software Foundation.
*
*/
-#include <mach/hardware.h>
-
#ifdef CONFIG_DEBUG_IMX1_UART
-#define UART_PADDR MX1_UART1_BASE_ADDR
+#define UART_PADDR 0x00206000
#elif defined (CONFIG_DEBUG_IMX25_UART)
-#define UART_PADDR MX25_UART1_BASE_ADDR
+#define UART_PADDR 0x43f90000
#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR MX2x_UART1_BASE_ADDR
+#define UART_PADDR 0x1000a000
#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
-#define UART_PADDR MX3x_UART1_BASE_ADDR
+#define UART_PADDR 0x43f90000
#elif defined (CONFIG_DEBUG_IMX51_UART)
-#define UART_PADDR MX51_UART1_BASE_ADDR
+#define UART_PADDR 0x73fbc000
#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
-#define UART_PADDR MX53_UART1_BASE_ADDR
+#define UART_PADDR 0x53fbc000
#elif defined (CONFIG_DEBUG_IMX6Q_UART2)
-#define UART_PADDR MX6Q_UART2_BASE_ADDR
+#define UART_PADDR 0x021e8000
#elif defined (CONFIG_DEBUG_IMX6Q_UART4)
-#define UART_PADDR MX6Q_UART4_BASE_ADDR
+#define UART_PADDR 0x021f0000
#endif
-#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)
+/*
+ * FIXME: This is a copy of IMX_IO_P2V in hardware.h, and needs to
+ * stay sync with that. It's hard to maintain, and should be fixed
+ * globally for multi-platform build to use a fixed virtual address
+ * for low-level debug uart port across platforms.
+ */
+#define IMX_IO_P2V(x) ( \
+ (((x) & 0x80000000) >> 7) | \
+ (0xf4000000 + \
+ (((x) & 0x50000000) >> 6) + \
+ (((x) & 0x0b000000) >> 4) + \
+ (((x) & 0x000fffff))))
+
+#define UART_VADDR IMX_IO_P2V(UART_PADDR)
.macro addruart, rp, rv, tmp
ldr \rp, =UART_PADDR @ physical
#define HWCAP_THUMBEE (1 << 11)
#define HWCAP_NEON (1 << 12)
#define HWCAP_VFPv3 (1 << 13)
-#define HWCAP_VFPv3D16 (1 << 14)
+#define HWCAP_VFPv3D16 (1 << 14) /* also set for VFPv4-D16 */
#define HWCAP_TLS (1 << 15)
#define HWCAP_VFPv4 (1 << 16)
#define HWCAP_IDIVA (1 << 17)
#define HWCAP_IDIVT (1 << 18)
+#define HWCAP_VFPD32 (1 << 19) /* set if VFP has 32 regs (not 16) */
#define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT)
update_sched_clock();
}
-void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
- unsigned long rate)
-{
- setup_sched_clock(read, bits, rate);
- cd.needs_suspend = true;
-}
-
void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
{
unsigned long r, w;
static int sched_clock_suspend(void)
{
sched_clock_poll(sched_clock_timer.data);
- if (cd.needs_suspend)
- cd.suspended = true;
+ cd.suspended = true;
return 0;
}
static void sched_clock_resume(void)
{
- if (cd.needs_suspend) {
- cd.epoch_cyc = read_sched_clock();
- cd.epoch_cyc_copy = cd.epoch_cyc;
- cd.suspended = false;
- }
+ cd.epoch_cyc = read_sched_clock();
+ cd.epoch_cyc_copy = cd.epoch_cyc;
+ cd.suspended = false;
}
static struct syscore_ops sched_clock_ops = {
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
-#include <mach/hardware.h>
+#include "hardware.h"
/* LAN9217 ethernet base address */
#define LAN9217_BASE_ADDR(n) (n + 0x0)
+config ARCH_MXC
+ bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR if !ZBOOT_ROM
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_IRQ_CHIP
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+ select USE_OF
+ help
+ Support for Freescale MXC/iMX-based family of processors
+
+menu "Freescale i.MX support"
+ depends on ARCH_MXC
+
+config MXC_IRQ_PRIOR
+ bool "Use IRQ priority"
+ help
+ Select this if you want to use prioritized IRQ handling.
+ This feature prevents higher priority ISR to be interrupted
+ by lower priority IRQ even IRQF_DISABLED flag is not set.
+ This may be useful in embedded applications, where are strong
+ requirements for timing.
+ Say N here, unless you have a specialized requirement.
+
+config MXC_TZIC
+ bool
+
+config MXC_AVIC
+ bool
+
+config MXC_DEBUG_BOARD
+ bool "Enable MXC debug board(for 3-stack)"
+ help
+ The debug board is an integral part of the MXC 3-stack(PDK)
+ platforms, it can be attached or removed from the peripheral
+ board. On debug board, several debug devices(ethernet, UART,
+ buttons, LEDs and JTAG) are implemented. Between the MCU and
+ these devices, a CPLD is added as a bridge which performs
+ data/address de-multiplexing and decode, signal level shift,
+ interrupt control and various board functions.
+
+config HAVE_EPIT
+ bool
+
+config MXC_USE_EPIT
+ bool "Use EPIT instead of GPT"
+ depends on HAVE_EPIT
+ help
+ Use EPIT as the system timer on systems that have it. Normally you
+ don't have a reason to do so as the EPIT has the same features and
+ uses the same clocks as the GPT. Anyway, on some systems the GPT
+ may be in use for other purposes.
+
+config MXC_ULPI
+ bool
+
+config ARCH_HAS_RNGA
+ bool
+
+config IRAM_ALLOC
+ bool
+ select GENERIC_ALLOCATOR
+
config HAVE_IMX_GPC
bool
bool
config HAVE_IMX_SRC
+ def_bool y if SMP
+
+config IMX_HAVE_IOMUX_V1
+ bool
+
+config ARCH_MXC_IOMUX_V3
bool
config ARCH_MX1
select PINCTRL_IMX51
select SOC_IMX5
-if ARCH_IMX_V4_V5
+if ARCH_MULTI_V4T
comment "MX1 platforms:"
config MACH_MXLADS
help
Say Yes here if you are using the Armadeus APF9328 development board
+endif
+
+if ARCH_MULTI_V5
+
comment "MX21 platforms:"
config MACH_MX21ADS
endchoice
+config MACH_IMX25_DT
+ bool "Support i.MX25 platforms from device tree"
+ select SOC_IMX25
+ help
+ Include support for Freescale i.MX25 based platforms
+ using the device tree for discovery
+
comment "MX27 platforms:"
config MACH_MX27ADS
endif
-if ARCH_IMX_V6_V7
+if ARCH_MULTI_V6
comment "MX31 platforms:"
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
+endif
+
+if ARCH_MULTI_V7
+
comment "i.MX5 platforms:"
config MACH_MX50_RDP
select HAVE_CAN_FLEXCAN if CAN
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
- select HAVE_IMX_SRC
select HAVE_SMP
select MFD_SYSCON
select PINCTRL
This enables support for Freescale i.MX6 Quad processor.
endif
+
+source "arch/arm/mach-imx/devices/Kconfig"
+
+endmenu
+obj-y := time.o cpu.o system.o irq-common.o
+
obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
clk-pfd.o clk-busy.o clk.o
+obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
+obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
+
+obj-$(CONFIG_MXC_TZIC) += tzic.o
+obj-$(CONFIG_MXC_AVIC) += avic.o
+
+obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
+obj-$(CONFIG_MXC_ULPI) += ulpi.o
+obj-$(CONFIG_MXC_USE_EPIT) += epit.o
+obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
+obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+
+ifdef CONFIG_SND_IMX_SOC
+obj-y += ssi-fiq.o
+obj-y += ssi-fiq-ksym.o
+endif
+
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
+obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
# i.MX27 based machines
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
+
+obj-y += devices/
#include <linux/irqdomain.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <mach/common.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
+#include "common.h"
+#include "hardware.h"
#include "irq-common.h"
#define AVIC_INTCNTL 0x00 /* int control reg */
#include <linux/clkdev.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
/* CCM register addresses */
#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
pr_err("imx1 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
- clk_register_clkdev(clk[dma_gate], "ahb", "imx-dma");
+ clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma");
+ clk_register_clkdev(clk[hclk], "ipg", "imx1-dma");
clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0");
clk_register_clkdev(clk[mma_gate], "mma", NULL);
clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0");
clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2");
- clk_register_clkdev(clk[hclk], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0");
clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
clk_register_clkdev(clk[per2], NULL, "imx-mmc.0");
- clk_register_clkdev(clk[per2], "per", "imx-fb.0");
- clk_register_clkdev(clk[dummy], "ipg", "imx-fb.0");
- clk_register_clkdev(clk[dummy], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[per2], "per", "imx1-fb.0");
+ clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0");
+ clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0");
clk_register_clkdev(clk[hclk], "mshc", NULL);
clk_register_clkdev(clk[per3], "ssi", NULL);
- clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
+ clk_register_clkdev(clk[clk32], NULL, "imx1-rtc.0");
clk_register_clkdev(clk[clko], "clko", NULL);
mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
#include <linux/module.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1");
clk_register_clkdev(clk[per2], "per", "imx21-cspi.2");
clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2");
- clk_register_clkdev(clk[per3], "per", "imx-fb.0");
- clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
- clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[per3], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx21-fb.0");
clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0");
clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0");
- clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand.0");
- clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx-dma");
- clk_register_clkdev(clk[dma_gate], "ipg", "imx-dma");
+ clk_register_clkdev(clk[nfc_gate], NULL, "imx21-nand.0");
+ clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx21-dma");
+ clk_register_clkdev(clk[dma_gate], "ipg", "imx21-dma");
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[i2c_gate], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[i2c_gate], NULL, "imx21-i2c.0");
clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad");
clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
clk_register_clkdev(clk[brom_gate], "brom", NULL);
#include <linux/io.h>
#include <linux/clkdev.h>
#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
+#include "mx25.h"
#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
#define ccm(x) (CRM_BASE + (x))
+static struct clk_onecell_data clk_data;
+
static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", };
static const char *per_sel_clks[] = { "ahb", "upll", };
per7_sel, per8_sel, per9_sel, per10_sel, per11_sel, per12_sel,
per13_sel, per14_sel, per15_sel, per0, per1, per2, per3, per4, per5,
per6, per7, per8, per9, per10, per11, per12, per13, per14, per15,
- csi_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per, gpt_ipg_per, i2c_ipg_per,
- lcdc_ipg_per, nfc_ipg_per, ssi1_ipg_per, ssi2_ipg_per, uart_ipg_per,
- csi_ahb, esdhc1_ahb, esdhc2_ahb, fec_ahb, lcdc_ahb, sdma_ahb,
- usbotg_ahb, can1_ipg, can2_ipg, csi_ipg, cspi1_ipg, cspi2_ipg,
- cspi3_ipg, dryice_ipg, esdhc1_ipg, esdhc2_ipg, fec_ipg, iim_ipg,
- kpp_ipg, lcdc_ipg, pwm1_ipg, pwm2_ipg, pwm3_ipg, pwm4_ipg, sdma_ipg,
- ssi1_ipg, ssi2_ipg, tsc_ipg, uart1_ipg, uart2_ipg, uart3_ipg,
- uart4_ipg, uart5_ipg, wdt_ipg, clk_max
+ csi_ipg_per, epit_ipg_per, esai_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per,
+ gpt_ipg_per, i2c_ipg_per, lcdc_ipg_per, nfc_ipg_per, owire_ipg_per,
+ pwm_ipg_per, sim1_ipg_per, sim2_ipg_per, ssi1_ipg_per, ssi2_ipg_per,
+ uart_ipg_per, ata_ahb, reserved1, csi_ahb, emi_ahb, esai_ahb, esdhc1_ahb,
+ esdhc2_ahb, fec_ahb, lcdc_ahb, rtic_ahb, sdma_ahb, slcdc_ahb, usbotg_ahb,
+ reserved2, reserved3, reserved4, reserved5, can1_ipg, can2_ipg, csi_ipg,
+ cspi1_ipg, cspi2_ipg, cspi3_ipg, dryice_ipg, ect_ipg, epit1_ipg, epit2_ipg,
+ reserved6, esdhc1_ipg, esdhc2_ipg, fec_ipg, reserved7, reserved8, reserved9,
+ gpt1_ipg, gpt2_ipg, gpt3_ipg, gpt4_ipg, reserved10, reserved11, reserved12,
+ iim_ipg, reserved13, reserved14, kpp_ipg, lcdc_ipg, reserved15, pwm1_ipg,
+ pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg,
+ sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg,
+ uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17,
+ wdt_ipg, clk_max
};
static struct clk *clk[clk_max];
-int __init mx25_clocks_init(void)
+static int __init __mx25_clocks_init(unsigned long osc_rate)
{
int i;
clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[osc] = imx_clk_fixed("osc", 24000000);
+ clk[osc] = imx_clk_fixed("osc", osc_rate);
clk[mpll] = imx_clk_pllv1("mpll", "osc", ccm(CCM_MPCTL));
clk[upll] = imx_clk_pllv1("upll", "osc", ccm(CCM_UPCTL));
clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4);
clk[per14] = imx_clk_divider("per14", "per14_sel", ccm(CCM_PCDR3), 16, 6);
clk[per15] = imx_clk_divider("per15", "per15_sel", ccm(CCM_PCDR3), 24, 6);
clk[csi_ipg_per] = imx_clk_gate("csi_ipg_per", "per0", ccm(CCM_CGCR0), 0);
+ clk[epit_ipg_per] = imx_clk_gate("epit_ipg_per", "per1", ccm(CCM_CGCR0), 1);
+ clk[esai_ipg_per] = imx_clk_gate("esai_ipg_per", "per2", ccm(CCM_CGCR0), 2);
clk[esdhc1_ipg_per] = imx_clk_gate("esdhc1_ipg_per", "per3", ccm(CCM_CGCR0), 3);
clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4);
clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5);
clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6);
clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7);
clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8);
+ clk[owire_ipg_per] = imx_clk_gate("owire_ipg_per", "per9", ccm(CCM_CGCR0), 9);
+ clk[pwm_ipg_per] = imx_clk_gate("pwm_ipg_per", "per10", ccm(CCM_CGCR0), 10);
+ clk[sim1_ipg_per] = imx_clk_gate("sim1_ipg_per", "per11", ccm(CCM_CGCR0), 11);
+ clk[sim2_ipg_per] = imx_clk_gate("sim2_ipg_per", "per12", ccm(CCM_CGCR0), 12);
clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
+ clk[ata_ahb] = imx_clk_gate("ata_ahb", "ahb", ccm(CCM_CGCR0), 16);
+ /* CCM_CGCR0(17): reserved */
clk[csi_ahb] = imx_clk_gate("csi_ahb", "ahb", ccm(CCM_CGCR0), 18);
+ clk[emi_ahb] = imx_clk_gate("emi_ahb", "ahb", ccm(CCM_CGCR0), 19);
+ clk[esai_ahb] = imx_clk_gate("esai_ahb", "ahb", ccm(CCM_CGCR0), 20);
clk[esdhc1_ahb] = imx_clk_gate("esdhc1_ahb", "ahb", ccm(CCM_CGCR0), 21);
clk[esdhc2_ahb] = imx_clk_gate("esdhc2_ahb", "ahb", ccm(CCM_CGCR0), 22);
clk[fec_ahb] = imx_clk_gate("fec_ahb", "ahb", ccm(CCM_CGCR0), 23);
clk[lcdc_ahb] = imx_clk_gate("lcdc_ahb", "ahb", ccm(CCM_CGCR0), 24);
+ clk[rtic_ahb] = imx_clk_gate("rtic_ahb", "ahb", ccm(CCM_CGCR0), 25);
clk[sdma_ahb] = imx_clk_gate("sdma_ahb", "ahb", ccm(CCM_CGCR0), 26);
+ clk[slcdc_ahb] = imx_clk_gate("slcdc_ahb", "ahb", ccm(CCM_CGCR0), 27);
clk[usbotg_ahb] = imx_clk_gate("usbotg_ahb", "ahb", ccm(CCM_CGCR0), 28);
+ /* CCM_CGCR0(29-31): reserved */
+ /* CCM_CGCR1(0): reserved in datasheet, used as audmux in FSL kernel */
clk[can1_ipg] = imx_clk_gate("can1_ipg", "ipg", ccm(CCM_CGCR1), 2);
clk[can2_ipg] = imx_clk_gate("can2_ipg", "ipg", ccm(CCM_CGCR1), 3);
clk[csi_ipg] = imx_clk_gate("csi_ipg", "ipg", ccm(CCM_CGCR1), 4);
clk[cspi2_ipg] = imx_clk_gate("cspi2_ipg", "ipg", ccm(CCM_CGCR1), 6);
clk[cspi3_ipg] = imx_clk_gate("cspi3_ipg", "ipg", ccm(CCM_CGCR1), 7);
clk[dryice_ipg] = imx_clk_gate("dryice_ipg", "ipg", ccm(CCM_CGCR1), 8);
+ clk[ect_ipg] = imx_clk_gate("ect_ipg", "ipg", ccm(CCM_CGCR1), 9);
+ clk[epit1_ipg] = imx_clk_gate("epit1_ipg", "ipg", ccm(CCM_CGCR1), 10);
+ clk[epit2_ipg] = imx_clk_gate("epit2_ipg", "ipg", ccm(CCM_CGCR1), 11);
+ /* CCM_CGCR1(12): reserved in datasheet, used as esai in FSL kernel */
clk[esdhc1_ipg] = imx_clk_gate("esdhc1_ipg", "ipg", ccm(CCM_CGCR1), 13);
clk[esdhc2_ipg] = imx_clk_gate("esdhc2_ipg", "ipg", ccm(CCM_CGCR1), 14);
clk[fec_ipg] = imx_clk_gate("fec_ipg", "ipg", ccm(CCM_CGCR1), 15);
+ /* CCM_CGCR1(16): reserved in datasheet, used as gpio1 in FSL kernel */
+ /* CCM_CGCR1(17): reserved in datasheet, used as gpio2 in FSL kernel */
+ /* CCM_CGCR1(18): reserved in datasheet, used as gpio3 in FSL kernel */
+ clk[gpt1_ipg] = imx_clk_gate("gpt1_ipg", "ipg", ccm(CCM_CGCR1), 19);
+ clk[gpt2_ipg] = imx_clk_gate("gpt2_ipg", "ipg", ccm(CCM_CGCR1), 20);
+ clk[gpt3_ipg] = imx_clk_gate("gpt3_ipg", "ipg", ccm(CCM_CGCR1), 21);
+ clk[gpt4_ipg] = imx_clk_gate("gpt4_ipg", "ipg", ccm(CCM_CGCR1), 22);
+ /* CCM_CGCR1(23): reserved in datasheet, used as i2c1 in FSL kernel */
+ /* CCM_CGCR1(24): reserved in datasheet, used as i2c2 in FSL kernel */
+ /* CCM_CGCR1(25): reserved in datasheet, used as i2c3 in FSL kernel */
clk[iim_ipg] = imx_clk_gate("iim_ipg", "ipg", ccm(CCM_CGCR1), 26);
+ /* CCM_CGCR1(27): reserved in datasheet, used as iomuxc in FSL kernel */
+ /* CCM_CGCR1(28): reserved in datasheet, used as kpp in FSL kernel */
clk[kpp_ipg] = imx_clk_gate("kpp_ipg", "ipg", ccm(CCM_CGCR1), 28);
clk[lcdc_ipg] = imx_clk_gate("lcdc_ipg", "ipg", ccm(CCM_CGCR1), 29);
+ /* CCM_CGCR1(30): reserved in datasheet, used as owire in FSL kernel */
clk[pwm1_ipg] = imx_clk_gate("pwm1_ipg", "ipg", ccm(CCM_CGCR1), 31);
clk[pwm2_ipg] = imx_clk_gate("pwm2_ipg", "ipg", ccm(CCM_CGCR2), 0);
clk[pwm3_ipg] = imx_clk_gate("pwm3_ipg", "ipg", ccm(CCM_CGCR2), 1);
clk[pwm4_ipg] = imx_clk_gate("pwm4_ipg", "ipg", ccm(CCM_CGCR2), 2);
+ clk[rngb_ipg] = imx_clk_gate("rngb_ipg", "ipg", ccm(CCM_CGCR2), 3);
+ /* CCM_CGCR2(4): reserved in datasheet, used as rtic in FSL kernel */
+ clk[scc_ipg] = imx_clk_gate("scc_ipg", "ipg", ccm(CCM_CGCR2), 5);
clk[sdma_ipg] = imx_clk_gate("sdma_ipg", "ipg", ccm(CCM_CGCR2), 6);
+ clk[sim1_ipg] = imx_clk_gate("sim1_ipg", "ipg", ccm(CCM_CGCR2), 7);
+ clk[sim2_ipg] = imx_clk_gate("sim2_ipg", "ipg", ccm(CCM_CGCR2), 8);
+ clk[slcdc_ipg] = imx_clk_gate("slcdc_ipg", "ipg", ccm(CCM_CGCR2), 9);
+ clk[spba_ipg] = imx_clk_gate("spba_ipg", "ipg", ccm(CCM_CGCR2), 10);
clk[ssi1_ipg] = imx_clk_gate("ssi1_ipg", "ipg", ccm(CCM_CGCR2), 11);
clk[ssi2_ipg] = imx_clk_gate("ssi2_ipg", "ipg", ccm(CCM_CGCR2), 12);
clk[tsc_ipg] = imx_clk_gate("tsc_ipg", "ipg", ccm(CCM_CGCR2), 13);
clk[uart3_ipg] = imx_clk_gate("uart3_ipg", "ipg", ccm(CCM_CGCR2), 16);
clk[uart4_ipg] = imx_clk_gate("uart4_ipg", "ipg", ccm(CCM_CGCR2), 17);
clk[uart5_ipg] = imx_clk_gate("uart5_ipg", "ipg", ccm(CCM_CGCR2), 18);
+ /* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */
clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
for (i = 0; i < ARRAY_SIZE(clk); i++)
pr_err("i.MX25 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
+ clk_prepare_enable(clk[emi_ahb]);
+
+ clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
+
+ return 0;
+}
+
+int __init mx25_clocks_init(void)
+{
+ __mx25_clocks_init(24000000);
+
/* i.mx25 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3");
clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4");
- clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[nfc_ipg_per], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
/* i.mx25 has the i.mx35 type cspi */
clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
clk_register_clkdev(clk[per10], "per", "mxc_pwm.3");
clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
- clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.0");
- clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.1");
- clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1");
+ clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
- clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx-fb.0");
- clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
- clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0");
clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1");
clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1");
clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1");
- clk_register_clkdev(clk[csi_ipg_per], "per", "mx2-camera.0");
- clk_register_clkdev(clk[csi_ipg], "ipg", "mx2-camera.0");
- clk_register_clkdev(clk[csi_ahb], "ahb", "mx2-camera.0");
+ clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0");
+ clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0");
+ clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0");
clk_register_clkdev(clk[dummy], "audmux", NULL);
clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1");
clk_register_clkdev(clk[iim_ipg], "iim", NULL);
mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1);
+
+ return 0;
+}
+
+int __init mx25_clocks_init_dt(void)
+{
+ struct device_node *np;
+ void __iomem *base;
+ int irq;
+ unsigned long osc_rate = 24000000;
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(np, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(np, "fsl,imx-osc"))
+ osc_rate = rate;
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm");
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ __mx25_clocks_init(osc_rate);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ irq = irq_of_parse_and_map(np, 0);
+
+ mxc_timer_init(base, irq);
+
return 0;
}
#include <linux/clk-provider.h>
#include <linux/of.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5");
clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5");
clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0");
- clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.0");
- clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "mxc-mmc.0");
- clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.1");
- clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.1");
- clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.2");
- clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.2");
+ clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0");
+ clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0");
+ clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1");
+ clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.1");
+ clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.2");
+ clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.2");
clk_register_clkdev(clk[cspi1_ipg_gate], NULL, "imx27-cspi.0");
clk_register_clkdev(clk[cspi2_ipg_gate], NULL, "imx27-cspi.1");
clk_register_clkdev(clk[cspi3_ipg_gate], NULL, "imx27-cspi.2");
- clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0");
- clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
- clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0");
- clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0");
+ clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
+ clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[nfc_baud_gate], NULL, "imx27-nand.0");
clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0");
clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0");
- clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma");
- clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma");
+ clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx27-dma");
+ clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx27-dma");
clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0");
clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx-i2c.0");
- clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx21-i2c.1");
clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
- clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0");
- clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0");
+ clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "imx27-camera.0");
+ clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0");
clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
- clk_register_clkdev(clk[rtc_ipg_gate], NULL, "mxc_rtc");
+ clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc");
clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
clk_register_clkdev(clk[cpu_div], "cpu", NULL);
clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
#include <linux/err.h>
#include <linux/of.h>
-#include <mach/hardware.h>
-#include <mach/mx31.h>
-#include <mach/common.h>
-
#include "clk.h"
+#include "common.h"
#include "crmregs-imx3.h"
+#include "hardware.h"
+#include "mx31.h"
static const char *mcu_main_sel[] = { "spll", "mpll", };
static const char *per_sel[] = { "per_div", "ipg", };
clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[rtc_gate], NULL, "mxc_rtc");
+ clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc");
clk_register_clkdev(clk[epit1_gate], "epit", NULL);
clk_register_clkdev(clk[epit2_gate], "epit", NULL);
- clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0");
clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3");
clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
- clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
- clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
- clk_register_clkdev(clk[sdhc1_gate], NULL, "mxc-mmc.0");
- clk_register_clkdev(clk[sdhc2_gate], NULL, "mxc-mmc.1");
+ clk_register_clkdev(clk[sdhc1_gate], NULL, "imx31-mmc.0");
+ clk_register_clkdev(clk[sdhc2_gate], NULL, "imx31-mmc.1");
clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
clk_register_clkdev(clk[firi_gate], "firi", NULL);
#include <linux/of.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
#include "crmregs-imx3.h"
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
struct arm_ahb_div {
unsigned char arm, ahb, sel;
clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
- clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
- clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
clk_prepare_enable(clk[spba_gate]);
#include <linux/of.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
#include "crm-regs-imx5.h"
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
/* Low-power Audio Playback Mode clock */
static const char *lp_apm_sel[] = { "osc", };
clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx35-cspi.2");
clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0");
clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1");
- clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
- clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.0");
clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.0");
clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
- clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand");
+ clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2");
mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
- clk_register_clkdev(clk[hsi2c_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[hsi2c_gate], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL);
clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0");
clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
- clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0");
clk_register_clkdev(clk[ipu_gate], "bus", "imx53-ipu");
clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx53-ipu");
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <mach/common.h>
+
#include "clk.h"
+#include "common.h"
#define CCGR0 0x68
#define CCGR1 0x6c
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/err.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
/**
* pll v1
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
+extern int mx25_clocks_init_dt(void);
extern int mx27_clocks_init_dt(void);
extern int mx31_clocks_init_dt(void);
extern int mx51_clocks_init_dt(void);
extern int mx53_revision(void);
extern int mx53_display_revision(void);
extern void imx_set_aips(void __iomem *);
+extern int mxc_device_init(void);
enum mxc_cpu_pwr_mode {
WAIT_CLOCKED, /* wfi only */
*/
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/iim.h>
+
+#include "iim.h"
+#include "hardware.h"
static int mx25_cpu_rev = -1;
#include <linux/io.h>
#include <linux/module.h>
-#include <mach/hardware.h>
+#include "hardware.h"
static int mx27_cpu_rev = -1;
static int mx27_cpu_partnumber;
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/iim.h>
-#include <mach/common.h>
+
+#include "common.h"
+#include "hardware.h"
+#include "iim.h"
static int mx31_cpu_rev = -1;
*/
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/iim.h>
+
+#include "hardware.h"
+#include "iim.h"
static int mx35_cpu_rev = -1;
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <mach/hardware.h>
#include <linux/io.h>
+#include "hardware.h"
+
static int mx5_cpu_rev = -1;
#define IIM_SREV 0x24
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
unsigned int __mxc_cpu_type;
EXPORT_SYMBOL(__mxc_cpu_type);
#include <linux/bug.h>
#include <linux/types.h>
-#include <mach/hardware.h>
#include <linux/kernel.h>
+#include "hardware.h"
+
static struct cpu_op mx51_cpu_op[] = {
{
.cpu_rate = 160000000,},
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/slab.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
#define CLK32_FREQ 32768
#define NANOSECOND (1000 * 1000 * 1000)
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx1.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_imx_fb_data imx1_imx_fb_data;
#define imx1_add_imx_fb(pdata) \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx21.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
#define imx21_add_imx21_hcd(pdata) \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx25.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_fec_data imx25_fec_data;
#define imx25_add_fec(pdata) \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx27.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_fec_data imx27_fec_data;
#define imx27_add_fec(pdata) \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx31.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
#define imx31_add_fsl_usb2_udc(pdata) \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx35.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_fec_data imx35_fec_data;
#define imx35_add_fec(pdata) \
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
-#include <mach/mx50.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[];
#define imx50_add_imx_uart(id, pdata) \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx51.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_fec_data imx51_fec_data;
#define imx51_add_fec(pdata) \
+obj-y := devices.o
+
obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
#include <linux/platform_data/video-imxfb.h>
struct imx_imx_fb_data {
+ const char *devid;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
#include <linux/platform_data/i2c-imx.h>
struct imx_imx_i2c_data {
+ const char *devid;
int id;
resource_size_t iobase;
resource_size_t iosize;
#include <linux/platform_data/camera-mx2.h>
struct imx_mx2_camera_data {
+ const char *devid;
resource_size_t iobasecsi;
resource_size_t iosizecsi;
resource_size_t irqcsi;
#include <linux/platform_data/mmc-mxcmmc.h>
struct imx_mxc_mmc_data {
+ const char *devid;
int id;
resource_size_t iobase;
resource_size_t iosize;
#include <linux/platform_data/mtd-mxc_nand.h>
struct imx_mxc_nand_data {
+ const char *devid;
/*
* id is traditionally 0, but -1 is more appropriate. We use -1 for new
* machines but don't change existing devices as the nand device usually
/* mxc_rtc */
struct imx_mxc_rtc_data {
+ const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata);
-struct platform_device *imx_add_imx_dma(void);
+struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
+ int irq, int irq_err);
struct platform_device *imx_add_imx_sdma(char *name,
resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
#include <linux/init.h>
#include <linux/err.h>
#include <linux/platform_device.h>
-#include <mach/common.h>
struct device mxc_aips_bus = {
.init_name = "mxc_aips",
.parent = &platform_bus,
};
-static int __init mxc_device_init(void)
+int __init mxc_device_init(void)
{
int ret;
done:
return ret;
}
-core_initcall(mxc_device_init);
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_ahci_imx_data_entry_single(soc, _devid) \
{ \
*/
#include <linux/dma-mapping.h>
#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_fec_data_entry_single(soc, _devid) \
{ \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \
{ \
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_fsl_usb2_udc_data_entry_single(soc) \
{ \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/devices-common.h>
+#include "devices-common.h"
struct platform_device *__init mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
* Boston, MA 02110-1301, USA.
*/
#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
struct platform_device *__init imx_add_gpio_keys(
const struct gpio_keys_platform_data *pdata)
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/devices-common.h>
+#include "devices-common.h"
-struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
+struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
+ resource_size_t iobase, int irq, int irq_err)
{
+ struct resource res[] = {
+ {
+ .start = iobase,
+ .end = iobase + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = irq_err,
+ .end = irq_err,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
return platform_device_register_resndata(&mxc_ahb_bus,
- "imx-dma", -1, NULL, 0, NULL, 0);
+ name, -1, res, ARRAY_SIZE(res), NULL, 0);
}
struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name,
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-#define imx_imx_fb_data_entry_single(soc, _size) \
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_imx_fb_data_entry_single(soc, _devid, _size) \
{ \
+ .devid = _devid, \
.iobase = soc ## _LCDC_BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_LCDC, \
#ifdef CONFIG_SOC_IMX1
const struct imx_imx_fb_data imx1_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX1, SZ_4K);
+ imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX1 */
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX21, SZ_4K);
+ imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_fb_data imx25_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX25, SZ_16K);
+ imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX27, SZ_4K);
+ imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
struct platform_device *__init imx_add_imx_fb(
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
-#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) \
+#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) \
{ \
+ .devid = _devid, \
.id = _id, \
.iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_I2C ## _hwid, \
}
-#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size) \
- [_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size)
+#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \
+ [_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
#ifdef CONFIG_SOC_IMX1
const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst =
- imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K);
+ imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX1 */
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
- imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K);
+ imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
#define imx25_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K)
+ imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K)
imx25_imx_i2c_data_entry(0, 1),
imx25_imx_i2c_data_entry(1, 2),
imx25_imx_i2c_data_entry(2, 3),
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
#define imx27_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K)
+ imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K)
imx27_imx_i2c_data_entry(0, 1),
imx27_imx_i2c_data_entry(1, 2),
};
#ifdef CONFIG_SOC_IMX31
const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
#define imx31_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K)
+ imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K)
imx31_imx_i2c_data_entry(0, 1),
imx31_imx_i2c_data_entry(1, 2),
imx31_imx_i2c_data_entry(2, 3),
#ifdef CONFIG_SOC_IMX35
const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
#define imx35_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K)
+ imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K)
imx35_imx_i2c_data_entry(0, 1),
imx35_imx_i2c_data_entry(1, 2),
imx35_imx_i2c_data_entry(2, 3),
#ifdef CONFIG_SOC_IMX50
const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = {
#define imx50_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX50, _id, _hwid, SZ_4K)
+ imx_imx_i2c_data_entry(MX50, "imx21-i2c", _id, _hwid, SZ_4K)
imx50_imx_i2c_data_entry(0, 1),
imx50_imx_i2c_data_entry(1, 2),
imx50_imx_i2c_data_entry(2, 3),
#ifdef CONFIG_SOC_IMX51
const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
#define imx51_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K)
+ imx_imx_i2c_data_entry(MX51, "imx21-i2c", _id, _hwid, SZ_4K)
imx51_imx_i2c_data_entry(0, 1),
imx51_imx_i2c_data_entry(1, 2),
{
+ .devid = "imx21-i2c",
.id = 2,
.iobase = MX51_HSI2C_DMA_BASE_ADDR,
.iosize = SZ_16K,
#ifdef CONFIG_SOC_IMX53
const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = {
#define imx53_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX53, _id, _hwid, SZ_4K)
+ imx_imx_i2c_data_entry(MX53, "imx21-i2c", _id, _hwid, SZ_4K)
imx53_imx_i2c_data_entry(0, 1),
imx53_imx_i2c_data_entry(1, 2),
imx53_imx_i2c_data_entry(2, 3),
},
};
- return imx_add_platform_device("imx-i2c", data->id,
+ return imx_add_platform_device(data->devid, data->id,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata));
}
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imx_keypad_data_entry_single(soc, _size) \
{ \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \
[_id] = { \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \
[_id] = { \
* Free Software Foundation.
*/
#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \
{ \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imx21_hcd_data_entry_single(soc) \
{ \
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#ifdef CONFIG_SOC_IMX27
const struct imx_imx27_coda_data imx27_coda_data __initconst = {
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imx_udc_data_entry_single(soc, _size) \
{ \
* Free Software Foundation.
*/
#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imxdi_rtc_data_entry_single(soc) \
{ \
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_ipu_core_entry_single(soc) \
{ \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_mx1_camera_data_entry_single(soc, _size) \
{ \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
-#define imx_mx2_camera_data_entry_single(soc) \
+#define imx_mx2_camera_data_entry_single(soc, _devid) \
{ \
+ .devid = _devid, \
.iobasecsi = soc ## _CSI_BASE_ADDR, \
.iosizecsi = SZ_4K, \
.irqcsi = soc ## _INT_CSI, \
}
-#define imx_mx2_camera_data_entry_single_emma(soc) \
+#define imx_mx2_camera_data_entry_single_emma(soc, _devid) \
{ \
+ .devid = _devid, \
.iobasecsi = soc ## _CSI_BASE_ADDR, \
.iosizecsi = SZ_32, \
.irqcsi = soc ## _INT_CSI, \
#ifdef CONFIG_SOC_IMX25
const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst =
- imx_mx2_camera_data_entry_single(MX25);
+ imx_mx2_camera_data_entry_single(MX25, "imx25-camera");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
- imx_mx2_camera_data_entry_single_emma(MX27);
+ imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera");
#endif /* ifdef CONFIG_SOC_IMX27 */
struct platform_device *__init imx_add_mx2_camera(
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device_dmamask("mx2-camera", 0,
+ return imx_add_platform_device_dmamask(data->devid, 0,
res, data->iobaseemmaprp ? 4 : 2,
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_mxc_ehci_data_entry_single(soc, _id, hs) \
{ \
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-#define imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size) \
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) \
{ \
+ .devid = _devid, \
.id = _id, \
.iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_SDHC ## _hwid, \
.dmareq = soc ## _DMA_REQ_SDHC ## _hwid, \
}
-#define imx_mxc_mmc_data_entry(soc, _id, _hwid, _size) \
- [_id] = imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size)
+#define imx_mxc_mmc_data_entry(soc, _devid, _id, _hwid, _size) \
+ [_id] = imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size)
#ifdef CONFIG_SOC_IMX21
const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = {
#define imx21_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX21, _id, _hwid, SZ_4K)
+ imx_mxc_mmc_data_entry(MX21, "imx21-mmc", _id, _hwid, SZ_4K)
imx21_mxc_mmc_data_entry(0, 1),
imx21_mxc_mmc_data_entry(1, 2),
};
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = {
#define imx27_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX27, _id, _hwid, SZ_4K)
+ imx_mxc_mmc_data_entry(MX27, "imx21-mmc", _id, _hwid, SZ_4K)
imx27_mxc_mmc_data_entry(0, 1),
imx27_mxc_mmc_data_entry(1, 2),
};
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = {
#define imx31_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX31, _id, _hwid, SZ_16K)
+ imx_mxc_mmc_data_entry(MX31, "imx31-mmc", _id, _hwid, SZ_16K)
imx31_mxc_mmc_data_entry(0, 1),
imx31_mxc_mmc_data_entry(1, 2),
};
.flags = IORESOURCE_DMA,
},
};
- return imx_add_platform_device_dmamask("mxc-mmc", data->id,
+ return imx_add_platform_device_dmamask(data->devid, data->id,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
* Free Software Foundation.
*/
#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-#define imx_mxc_nand_data_entry_single(soc, _size) \
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_mxc_nand_data_entry_single(soc, _devid, _size) \
{ \
+ .devid = _devid, \
.iobase = soc ## _NFC_BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_NFC \
}
-#define imx_mxc_nandv3_data_entry_single(soc, _size) \
+#define imx_mxc_nandv3_data_entry_single(soc, _devid, _size) \
{ \
+ .devid = _devid, \
.id = -1, \
.iobase = soc ## _NFC_BASE_ADDR, \
.iosize = _size, \
#ifdef CONFIG_SOC_IMX21
const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX21, SZ_4K);
+ imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX25, SZ_8K);
+ imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX27, SZ_4K);
+ imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX31, SZ_4K);
+ imx_mxc_nand_data_entry_single(MX31, "imx27-nand", SZ_4K);
#endif
#ifdef CONFIG_SOC_IMX35
const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX35, SZ_8K);
+ imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K);
#endif
#ifdef CONFIG_SOC_IMX51
const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst =
- imx_mxc_nandv3_data_entry_single(MX51, SZ_16K);
+ imx_mxc_nandv3_data_entry_single(MX51, "imx51-nand", SZ_16K);
#endif
struct platform_device *__init imx_add_mxc_nand(
.flags = IORESOURCE_MEM,
},
};
- return imx_add_platform_device("mxc_nand", data->id,
+ return imx_add_platform_device(data->devid, data->id,
res, ARRAY_SIZE(res) - !data->axibase,
pdata, sizeof(*pdata));
}
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size) \
{ \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
struct imx_mxc_rnga_data {
resource_size_t iobase;
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
-#define imx_mxc_rtc_data_entry_single(soc) \
+#define imx_mxc_rtc_data_entry_single(soc, _devid) \
{ \
+ .devid = _devid, \
.iobase = soc ## _RTC_BASE_ADDR, \
.irq = soc ## _INT_RTC, \
}
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst =
- imx_mxc_rtc_data_entry_single(MX31);
+ imx_mxc_rtc_data_entry_single(MX31, "imx21-rtc");
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst =
- imx_mxc_rtc_data_entry_single(MX35);
+ imx_mxc_rtc_data_entry_single(MX35, "imx21-rtc");
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_mxc_rtc(
},
};
- return imx_add_platform_device("mxc_rtc", -1,
+ return imx_add_platform_device(data->devid, -1,
res, ARRAY_SIZE(res), NULL, 0);
}
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_mxc_w1_data_entry_single(soc) \
{ \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_pata_imx_data_entry_single(soc, _size) \
{ \
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
#include <linux/platform_data/mmc-esdhc-imx.h>
+#include "../hardware.h"
+#include "devices-common.h"
+
#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
{ \
.devid = _devid, \
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \
{ \
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX25_OTG_SIC_SHIFT 29
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX27_OTG_SIC_SHIFT 29
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX31_OTG_SIC_SHIFT 29
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX35_OTG_SIC_SHIFT 29
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define MXC_OTG_OFFSET 0
#define MXC_H1_OFFSET 0x200
#define MXC_H2_OFFSET 0x400
#include <linux/clockchips.h>
#include <linux/clk.h>
#include <linux/err.h>
-
-#include <mach/hardware.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
+
+#include "common.h"
+#include "hardware.h"
static struct clock_event_device clockevent_epit;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
#include <asm/mach/arch.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/hardware.h>
-
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
static const int eukrea_mbimx27_pins[] __initconst = {
/* UART2 */
#include <linux/spi/spi.h>
#include <video/platform_lcd.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx25.h>
-#include <mach/common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mx25.h>
+#include "common.h"
#include "devices-imx25.h"
+#include "hardware.h"
+#include "iomux-mx25.h"
+#include "mx25.h"
static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
/* LCD */
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-
+#include "common.h"
#include "devices-imx35.h"
+#include "hardware.h"
+#include "iomux-mx35.h"
static const struct fb_videomode fb_modedb[] = {
{
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx51.h>
-
+#include "common.h"
#include "devices-imx51.h"
+#include "hardware.h"
+#include "iomux-mx51.h"
static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = {
/* LED */
#define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x))
-#include <mach/mxc.h>
+#include "mxc.h"
-#include <mach/mx6q.h>
-#include <mach/mx50.h>
-#include <mach/mx51.h>
-#include <mach/mx53.h>
-#include <mach/mx3x.h>
-#include <mach/mx31.h>
-#include <mach/mx35.h>
-#include <mach/mx2x.h>
-#include <mach/mx21.h>
-#include <mach/mx27.h>
-#include <mach/mx1.h>
-#include <mach/mx25.h>
+#include "mx6q.h"
+#include "mx50.h"
+#include "mx51.h"
+#include "mx53.h"
+#include "mx3x.h"
+#include "mx31.h"
+#include "mx35.h"
+#include "mx2x.h"
+#include "mx21.h"
+#include "mx27.h"
+#include "mx1.h"
+#include "mx25.h"
#define imx_map_entry(soc, name, _type) { \
.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
#include <linux/errno.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
-#include <mach/common.h>
+
+#include "common.h"
static inline void cpu_enter_lowpower(void)
{
--- /dev/null
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include "common.h"
+#include "mx25.h"
+
+static void __init imx25_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void __init imx25_timer_init(void)
+{
+ mx25_clocks_init_dt();
+}
+
+static struct sys_timer imx25_timer = {
+ .init = imx25_timer_init,
+};
+
+static const char * const imx25_dt_board_compat[] __initconst = {
+ "fsl,imx25",
+ NULL
+};
+
+DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
+ .map_io = mx25_map_io,
+ .init_early = imx25_init_early,
+ .init_irq = mx25_init_irq,
+ .handle_irq = imx25_handle_irq,
+ .timer = &imx25_timer,
+ .init_machine = imx25_dt_init,
+ .dt_compat = imx25_dt_board_compat,
+ .restart = mxc_restart,
+MACHINE_END
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx27.h>
+
+#include "common.h"
+#include "mx27.h"
static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART1_BASE_ADDR, "imx21-uart.0", NULL),
OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART2_BASE_ADDR, "imx21-uart.1", NULL),
OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART3_BASE_ADDR, "imx21-uart.2", NULL),
OF_DEV_AUXDATA("fsl,imx27-fec", MX27_FEC_BASE_ADDR, "imx27-fec.0", NULL),
- OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
- OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx21-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx21-i2c.1", NULL),
OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI1_BASE_ADDR, "imx27-cspi.0", NULL),
OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL),
OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL),
OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL),
- OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "mxc_nand.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "imx27-nand.0", NULL),
{ /* sentinel */ }
};
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx31.h>
+
+#include "common.h"
+#include "mx31.h"
static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR,
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx51.h>
+
+#include "common.h"
+#include "mx51.h"
/*
* Lookup table for attaching a specific name and platform_data pointer to
OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx21-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx21-i2c.1", NULL),
OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL),
OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
{ /* sentinel */ }
+++ /dev/null
-#ifndef __MACH_DMA_MX1_MX2_H__
-#define __MACH_DMA_MX1_MX2_H__
-/*
- * Don't use this header in new code, it will go away when all users are
- * converted to mach/dma-v1.h
- */
-
-#include <mach/dma-v1.h>
-
-#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
+
+#include "hardware.h"
+#include "iomux-mx3.h"
/*
* IOMUX register (base) addresses
#ifndef __MACH_IOMUX_MX1_H__
#define __MACH_IOMUX_MX1_H__
-#include <mach/iomux-v1.h>
+#include "iomux-v1.h"
#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0)
#ifndef __MACH_IOMUX_MX21_H__
#define __MACH_IOMUX_MX21_H__
-#include <mach/iomux-mx2x.h>
-#include <mach/iomux-v1.h>
+#include "iomux-mx2x.h"
+#include "iomux-v1.h"
/* Primary GPIO pin functions */
#ifndef __MACH_IOMUX_MX25_H__
#define __MACH_IOMUX_MX25_H__
-#include <mach/iomux-v3.h>
+#include "iomux-v3.h"
/*
* IOMUX/PAD Bit field definitions
#ifndef __MACH_IOMUX_MX27_H__
#define __MACH_IOMUX_MX27_H__
-#include <mach/iomux-mx2x.h>
-#include <mach/iomux-v1.h>
+#include "iomux-mx2x.h"
+#include "iomux-v1.h"
/* Primary GPIO pin functions */
#ifndef __MACH_IOMUX_MX35_H__
#define __MACH_IOMUX_MX35_H__
-#include <mach/iomux-v3.h>
+#include "iomux-v3.h"
/*
* The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
#ifndef __MACH_IOMUX_MX50_H__
#define __MACH_IOMUX_MX50_H__
-#include <mach/iomux-v3.h>
+#include "iomux-v3.h"
#define MX50_ELCDIF_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
#ifndef __MACH_IOMUX_MX51_H__
#define __MACH_IOMUX_MX51_H__
-#include <mach/iomux-v3.h>
+#include "iomux-v3.h"
#define __NA_ 0x000
#include <linux/string.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include <mach/iomux-v1.h>
+
+#include "hardware.h"
+#include "iomux-v1.h"
static void __iomem *imx_iomuxv1_baseaddr;
static unsigned imx_iomuxv1_numports;
#include <linux/string.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include <mach/iomux-v3.h>
+
+#include "hardware.h"
+#include "iomux-v3.h"
static void __iomem *base;
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/genalloc.h>
-#include <mach/iram.h>
+
+#include "iram.h"
static unsigned long iram_phys_base;
static void __iomem *iram_virt_base;
#ifndef __PLAT_MXC_IRQ_COMMON_H__
#define __PLAT_MXC_IRQ_COMMON_H__
+/* all normal IRQs can be FIQs */
+#define FIQ_START 0
+
struct mxc_extra_irq
{
int (*set_priority)(unsigned char irq, unsigned char prio);
#include <asm/page.h>
#include <asm/sizes.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
static struct map_desc imx_lluart_desc = {
#ifdef CONFIG_DEBUG_IMX6Q_UART2
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx1.h>
-
+#include "common.h"
#include "devices-imx1.h"
+#include "hardware.h"
+#include "iomux-mx1.h"
static const int apf9328_pins[] __initconst = {
/* UART1 */
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
+#include "common.h"
#include "devices-imx31.h"
#include "crmregs-imx3.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
static int armadillo5x0_pins[] = {
/* UART1 */
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <mach/iomux-mx3.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
#include <asm/mach/time.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx27.h>
-#include <mach/ulpi.h>
-
+#include "common.h"
#include "devices-imx27.h"
+#include "eukrea-baseboards.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
+#include "ulpi.h"
static const int eukrea_cpuimx27_pins[] __initconst = {
/* UART1 */
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/eukrea-baseboards.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-
+#include "common.h"
#include "devices-imx35.h"
+#include "eukrea-baseboards.h"
+#include "hardware.h"
+#include "iomux-mx35.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
#include <linux/spi/spi.h>
#include <linux/can/platform/mcp251x.h>
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
#include "devices-imx51.h"
#include "cpu_op-mx51.h"
+#include "eukrea-baseboards.h"
+#include "hardware.h"
+#include "iomux-mx51.h"
#define USBH1_RST IMX_GPIO_NR(2, 28)
#define ETH_RST IMX_GPIO_NR(2, 31)
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <mach/eukrea-baseboards.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-#include <mach/iomux-mx25.h>
+#include "common.h"
#include "devices-imx25.h"
+#include "eukrea-baseboards.h"
+#include "hardware.h"
+#include "iomux-mx25.h"
+#include "mx25.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
#include <asm/mach/time.h>
#include <asm/system_info.h>
#include <asm/memblock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx27.h>
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
#define TVP5150_RSTN (GPIO_PORTC + 18)
#define TVP5150_PWDN (GPIO_PORTC + 19)
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
+#include "hardware.h"
+#include "common.h"
#include "devices-imx27.h"
+#include "iomux-mx27.h"
static const int mx27ipcam_pins[] __initconst = {
/* UART1 */
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
static const int mx27lite_pins[] __initconst = {
/* UART1 */
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx53.h>
+
+#include "common.h"
+#include "mx53.h"
/*
* Lookup table for attaching a specific name and platform_data pointer to
OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx21-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx21-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx21-i2c.2", NULL),
OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
{ /* sentinel */ }
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/system_misc.h>
-#include <mach/common.h>
-#include <mach/cpuidle.h>
-#include <mach/hardware.h>
+#include "common.h"
+#include "cpuidle.h"
+#include "hardware.h"
void imx6q_restart(char mode, const char *cmd)
{
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
#define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \
IMX_IO_P2V_MODULE(x, MX31_CS4) ?: \
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx1.h>
-
+#include "common.h"
#include "devices-imx1.h"
+#include "hardware.h"
+#include "iomux-mx1.h"
static const int mx1ads_pins[] __initconst = {
/* UART1 */
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/iomux-mx21.h>
+#include "common.h"
#include "devices-imx21.h"
+#include "hardware.h"
+#include "iomux-mx21.h"
/*
* Memory-mapped I/O on MX21ADS base board
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-#include <mach/iomux-mx25.h>
+#include "common.h"
#include "devices-imx25.h"
+#include "hardware.h"
+#include "iomux-mx25.h"
+#include "mx25.h"
#define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6)
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/ulpi.h>
-#include <mach/3ds_debugboard.h>
+#include "3ds_debugboard.h"
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
+#include "ulpi.h"
#define SD1_EN_GPIO IMX_GPIO_NR(2, 25)
#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23)
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/irq.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/iomux-mx27.h>
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
/*
* Base address of PBC controller, CS4
#include <media/soc_camera.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/3ds_debugboard.h>
-#include <mach/ulpi.h>
+#include "3ds_debugboard.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
static int mx31_3ds_pins[] = {
/* UART1 */
};
static struct regulator_consumer_supply vmmc2_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "mxc-mmc.0"),
+ REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"),
};
static struct regulator_init_data vmmc2_init = {
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
#include <linux/mfd/wm8350/audio.h>
#include <linux/mfd/wm8350/pmic.h>
#endif
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
/* Base address of PBC controller */
#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lilly.h>
-#include <mach/ulpi.h>
-
+#include "board-mx31lilly.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
/*
* This file contains module-specific initialization routines for LILLY-1131.
#include <asm/page.h>
#include <asm/setup.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/board-mx31lite.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
+#include "board-mx31lite.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
/*
* This file contains the module-specific initialization routines.
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <mach/board-mx31moboard.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
#include <linux/platform_data/asoc-imx-ssi.h>
+#include "board-mx31moboard.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
static unsigned int moboard_pins[] = {
/* UART0 */
static struct regulator_consumer_supply sdhc_consumers[] = {
{
- .dev_name = "mxc-mmc.0",
+ .dev_name = "imx31-mmc.0",
.supply = "sdhc0_vcc",
},
{
- .dev_name = "mxc-mmc.1",
+ .dev_name = "imx31-mmc.1",
.supply = "sdhc1_vcc",
},
};
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-#include <mach/3ds_debugboard.h>
#include <video/platform_lcd.h>
#include <media/soc_camera.h>
+#include "3ds_debugboard.h"
+#include "common.h"
#include "devices-imx35.h"
+#include "hardware.h"
+#include "iomux-mx35.h"
#define GPIO_MC9S08DZ60_GPS_ENABLE 0
#define GPIO_MC9S08DZ60_HDD_ENABLE 4
#include <linux/delay.h>
#include <linux/io.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx50.h>
-
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
#include "devices-imx50.h"
+#include "hardware.h"
+#include "iomux-mx50.h"
#define FEC_EN IMX_GPIO_NR(6, 23)
#define FEC_RESET_B IMX_GPIO_NR(4, 12)
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx51.h>
-#include <mach/3ds_debugboard.h>
-
+#include "3ds_debugboard.h"
+#include "common.h"
#include "devices-imx51.h"
+#include "hardware.h"
+#include "iomux-mx51.h"
#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
#include "devices-imx51.h"
#include "cpu_op-mx51.h"
+#include "hardware.h"
+#include "iomux-mx51.h"
#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7)
#define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27)
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/irq.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <linux/gpio.h>
-#include <mach/iomux-mx27.h>
#include <linux/i2c/pca953x.h>
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
static const int mxt_td60_pins[] __initconst = {
/* UART0 */
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx27.h>
#include <asm/mach/time.h>
-#include <mach/ulpi.h>
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
+#include "ulpi.h"
#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
#include "pcm037.h"
+#include "ulpi.h"
static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-
#include <asm/mach-types.h>
#include "pcm037.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "iomux-mx3.h"
static unsigned int pcm037_eet_pins[] = {
/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/board-pcm038.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx27.h>
-#include <mach/ulpi.h>
-
+#include "board-pcm038.h"
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
+#include "ulpi.h"
static const int pcm038_pins[] __initconst = {
/* UART1 */
static struct regulator_consumer_supply sdhc1_consumers[] = {
{
- .dev_name = "mxc-mmc.1",
+ .dev_name = "imx21-mmc.1",
.supply = "sdhc_vcc",
},
};
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-#include <mach/ulpi.h>
-
+#include "common.h"
#include "devices-imx35.h"
+#include "hardware.h"
+#include "iomux-mx35.h"
+#include "ulpi.h"
static const struct fb_videomode fb_modedb[] = {
{
#include <linux/mtd/nand.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
#include <asm/page.h>
#include <asm/setup.h>
-#include <mach/iomux-mx3.h>
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
/* FPGA defines */
#define QONG_FPGA_VERSION(major, minor, rev) \
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx1.h>
-
+#include "common.h"
#include "devices-imx1.h"
+#include "hardware.h"
+#include "iomux-mx1.h"
/*
* This scb9328 has a 32MiB flash
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/mfd/mc13xxx.h>
+#include "common.h"
#include "devices-imx35.h"
+#include "hardware.h"
+#include "iomux-mx35.h"
#define GPIO_LCDPWR IMX_GPIO_NR(1, 2)
#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v1.h>
+#include "common.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
+#include "iomux-v1.h"
static struct map_desc imx_io_desc[] __initdata = {
imx_map_entry(MX1, IO, MT_DEVICE),
MX1_GPIO_INT_PORTC, 0);
mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256,
MX1_GPIO_INT_PORTD, 0);
+ imx_add_imx_dma("imx1-dma", MX1_DMA_BASE_ADDR,
+ MX1_DMA_INT, MX1_DMA_ERR);
pinctrl_provide_dummies();
}
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/pinctrl/machine.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/iomux-v1.h>
+
+#include "common.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
+#include "iomux-v1.h"
/* MX21 memory map definition */
static struct map_desc imx21_io_desc[] __initdata = {
void __init imx21_soc_init(void)
{
+ mxc_device_init();
+
mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
pinctrl_provide_dummies();
- imx_add_imx_dma();
+ imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR,
+ MX21_INT_DMACH0, 0); /* No ERR irq */
platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
ARRAY_SIZE(imx21_audmux_res));
}
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/mx25.h>
-#include <mach/iomux-v3.h>
+#include "common.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
+#include "iomux-v3.h"
+#include "mx25.h"
/*
* This table defines static virtual address mappings for I/O regions.
void __init imx25_soc_init(void)
{
+ mxc_device_init();
+
/* i.mx25 has the i.mx35 type gpio */
mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/pinctrl/machine.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/iomux-v1.h>
+
+#include "common.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
+#include "iomux-v1.h"
/* MX27 memory map definition */
static struct map_desc imx27_io_desc[] __initdata = {
void __init imx27_soc_init(void)
{
+ mxc_device_init();
+
/* i.mx27 has the i.mx21 type gpio */
mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
pinctrl_provide_dummies();
- imx_add_imx_dma();
+ imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR,
+ MX27_INT_DMACH0, 0); /* No ERR irq */
/* imx27 has the imx21 type audmux */
platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
ARRAY_SIZE(imx27_audmux_res));
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-
+#include "common.h"
#include "crmregs-imx3.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
+#include "iomux-v3.h"
void __iomem *mx3_ccm_base;
imx3_init_l2x0();
+ mxc_device_init();
+
mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
imx3_init_l2x0();
+ mxc_device_init();
+
mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/iomux-v3.h>
+#include "common.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
+#include "iomux-v3.h"
/*
* Define the MX50 memory map.
void __init imx50_soc_init(void)
{
+ mxc_device_init();
+
/* i.mx50 has the i.mx35 type gpio */
mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
void __init imx51_soc_init(void)
{
+ mxc_device_init();
+
/* i.mx51 has the i.mx35 type gpio */
mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lilly.h>
-
+#include "board-mx31lilly.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
/*
* This file contains board-specific initialization routines for the
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lite.h>
-
+#include "board-mx31lite.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
/*
* This file contains board-specific initialization routines for the
#include <linux/usb/otg.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/hardware.h>
-#include <mach/ulpi.h>
-
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
static unsigned int devboard_pins[] = {
/* UART1 */
#include <linux/usb/otg.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
#include <media/soc_camera.h>
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
static unsigned int marxbot_pins[] = {
/* SDHC2 */
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31moboard.h>
-#include <mach/ulpi.h>
-
#include <media/soc_camera.h>
+#include "board-mx31moboard.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
static unsigned int smartbot_pins[] = {
/* UART1 */
#include <asm/mach/arch.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/hardware.h>
-
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
static const int pcm970_pins[] __initconst = {
/* SDHC */
#include <asm/smp_scu.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
+
+#include "common.h"
+#include "hardware.h"
static void __iomem *scu_base;
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
static int mx27_suspend_enter(suspend_state_t state)
{
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/io.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "common.h"
#include "crmregs-imx3.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
/*
* Set cpu low power mode before WFI instruction. This function is called
#include <asm/cacheflush.h>
#include <asm/system_misc.h>
#include <asm/tlbflush.h>
-#include <mach/common.h>
-#include <mach/cpuidle.h>
-#include <mach/hardware.h>
+
+#include "common.h"
+#include "cpuidle.h"
#include "crm-regs-imx5.h"
+#include "hardware.h"
/*
* The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit.
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include <asm/hardware/cache-l2x0.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
+
+#include "common.h"
+#include "hardware.h"
extern unsigned long phys_l2x0_saved_regs;
#include <linux/err.h>
#include <linux/delay.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
#include <asm/system_misc.h>
#include <asm/proc-fns.h>
#include <asm/mach-types.h>
+#include "common.h"
+#include "hardware.h"
+
static void __iomem *wdog_base;
/*
#include <linux/clk.h>
#include <linux/err.h>
-#include <mach/hardware.h>
#include <asm/sched_clock.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
+
+#include "common.h"
+#include "hardware.h"
/*
* There are 2 versions of the timer hardware on Freescale MXC hardware.
#include <asm/mach/irq.h>
#include <asm/exception.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-
+#include "common.h"
+#include "hardware.h"
#include "irq-common.h"
/*
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
+#include "ulpi.h"
/* ULPIVIEW register bits */
#define ULPIVW_WU (1 << 31) /* Wakeup */
#
# Common support
-obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
+obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
+ serial.o devices.o dma.o
obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
.atag_offset = 0x100,
.map_io = ams_delta_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
.init_late = ams_delta_init_late,
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/mux.h>
#include <mach/flash.h>
-#include <plat/fpga.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
+#include "fpga.h"
/* fsample is pretty close to p2-sample */
static void __init fsample_init_smc91x(void)
{
- fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+ __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
- fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+ __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
.atag_offset = 0x100,
.map_io = omap_fsample_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_fsample_init,
.init_late = omap1_init_late,
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_generic_init,
.init_late = omap1_init_late,
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
-
+#include <linux/platform_data/gpio-omap.h>
#include <linux/i2c/tps65010.h>
-#include <plat/mmc.h>
-
#include "board-h2.h"
+#include "mmc.h"
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
#include <asm/mach/map.h>
#include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/flash.h>
#include "common.h"
#include "board-h2.h"
+#include "dma.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_START 0x04000300
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = h2_init,
.init_late = omap1_init_late,
#include <linux/i2c/tps65010.h>
-#include <plat/mmc.h>
-
#include "board-h3.h"
+#include "mmc.h"
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
#include <asm/mach/map.h>
#include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/flash.h>
#include <mach/hardware.h>
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = h3_init,
.init_late = omap1_init_late,
#include <asm/mach/arch.h>
#include <mach/omap7xx.h>
-#include <plat/mmc.h>
+#include "mmc.h"
#include <mach/irqs.h>
#include <mach/usb.h>
.atag_offset = 0x100,
.map_io = htcherald_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = htcherald_init,
.init_late = omap1_init_late,
#include <mach/mux.h>
#include <mach/flash.h>
-#include <plat/fpga.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
-#include <plat/mmc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "iomap.h"
#include "common.h"
+#include "mmc.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define INNOVATOR1610_ETHR_START 0x04000300
static int innovator_get_pendown_state(void)
{
- return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+ return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
}
static const struct ads7846_platform_data innovator1510_ts_info = {
static void __init innovator_init_smc91x(void)
{
if (cpu_is_omap1510()) {
- fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
OMAP1510_FPGA_RST);
udelay(750);
} else {
int vdd)
{
if (power_on)
- fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
OMAP1510_FPGA_POWER);
else
- fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
OMAP1510_FPGA_POWER);
return 0;
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
- reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg = __raw_readb(OMAP1510_FPGA_POWER);
reg |= OMAP1510_FPGA_PCR_COM1_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
+ __raw_writeb(reg, OMAP1510_FPGA_POWER);
udelay(10);
- reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg = __raw_readb(OMAP1510_FPGA_POWER);
reg |= OMAP1510_FPGA_PCR_COM2_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
+ __raw_writeb(reg, OMAP1510_FPGA_POWER);
udelay(10);
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
*/
static void __init innovator_map_io(void)
{
+#ifdef CONFIG_ARCH_OMAP15XX
omap15xx_map_io();
iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
/* Dump the Innovator FPGA rev early - useful info for support. */
pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
- fpga_read(OMAP1510_FPGA_REV_HIGH),
- fpga_read(OMAP1510_FPGA_REV_LOW),
- fpga_read(OMAP1510_FPGA_BOARD_REV));
+ __raw_readb(OMAP1510_FPGA_REV_HIGH),
+ __raw_readb(OMAP1510_FPGA_REV_LOW),
+ __raw_readb(OMAP1510_FPGA_BOARD_REV));
+#endif
}
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
.atag_offset = 0x100,
.map_io = innovator_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = innovator_init,
.init_late = omap1_init_late,
#include <asm/mach/map.h>
#include <mach/mux.h>
-#include <plat/mmc.h>
-#include <plat/clock.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
+#include "clock.h"
+#include "mmc.h"
#define ADS7846_PENDOWN_GPIO 15
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_nokia770_init,
.init_late = omap1_init_late,
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = osk_init,
.init_late = omap1_init_late,
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/tc.h>
-#include <plat/dma.h>
+#include <mach/tc.h>
+#include <plat-omap/dma-omap.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/usb.h>
#include "common.h"
+#include "dma.h"
#define PALMTE_USBDETECT_GPIO 0
#define PALMTE_USB_OR_DC_GPIO 1
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmte_init,
.init_late = omap1_init_late,
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/platform_data/omap1_bl.h>
+#include <linux/platform_data/leds-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/led.h>
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/usb.h>
#include "common.h"
+#include "dma.h"
#define PALMTT_USBDETECT_GPIO 0
#define PALMTT_CABLE_GPIO 1
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmtt_init,
.init_late = omap1_init_late,
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/usb.h>
#include "common.h"
+#include "dma.h"
#define PALMZ71_USBDETECT_GPIO 0
#define PALMZ71_PENIRQ_GPIO 6
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmz71_init,
.init_late = omap1_init_late,
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/mux.h>
-#include <plat/fpga.h>
#include <mach/flash.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
+#include "fpga.h"
static const unsigned int p2_keymap[] = {
KEY(0, 0, KEY_UP),
static void __init perseus2_init_smc91x(void)
{
- fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+ __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
- fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+ __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
.atag_offset = 0x100,
.map_io = omap_perseus2_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_perseus2_init,
.init_late = omap1_init_late,
#include <linux/platform_device.h>
#include <mach/hardware.h>
-#include <plat/mmc.h>
#include <mach/board-sx1.h>
+#include "mmc.h"
+
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
static int mmc_set_power(struct device *dev, int slot, int power_on,
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/irda.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/board-sx1.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
+#include "dma.h"
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_sx1_init,
.init_late = omap1_init_late,
#include <mach/board-voiceblue.h>
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = voiceblue_init,
.init_late = omap1_init_late,
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <asm/mach-types.h>
-#include <plat/cpu.h>
-#include <plat/usb.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/clkdev_omap.h>
-
#include <mach/hardware.h>
+#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "opp.h"
+#include "sram.h"
__u32 arm_idlect1_mask;
struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
+
/*
* Omap1 specific clock functions
*/
}
#endif
+
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ int ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap1_clk_enable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (clk->usecount == 0) {
+ pr_err("Trying disable clock %s with 0 usecount\n",
+ clk->name);
+ WARN_ON(1);
+ goto out;
+ }
+
+ omap1_clk_disable(clk);
+
+out:
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long flags;
+ unsigned long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = clk->rate;
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap1_clk_round_rate(clk, rate);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk))
+ return ret;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap1_clk_set_rate(clk, rate);
+ if (ret == 0)
+ propagate_rate(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n");
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+
+int __initdata mpurate;
+
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+ get_option(&str, &mpurate);
+
+ if (!mpurate)
+ return 1;
+
+ if (mpurate < 1000)
+ mpurate *= 1000000;
+
+ return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+ return clk->parent->rate;
+}
+
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+ WARN_ON(!clk->fixed_div);
+
+ return clk->parent->rate / clk->fixed_div;
+}
+
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+ list_del_init(&child->sibling);
+ if (parent)
+ list_add(&child->sibling, &parent->children);
+ child->parent = parent;
+
+ /* now do the debugfs renaming to reattach the child
+ to the proper parent */
+}
+
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &tclk->children, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+static LIST_HEAD(root_clks);
+
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &root_clks, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run. No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+ INIT_LIST_HEAD(&clk->children);
+}
+
+int clk_register(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ /*
+ * trap out already registered clocks
+ */
+ if (clk->node.next || clk->node.prev)
+ return 0;
+
+ mutex_lock(&clocks_mutex);
+ if (clk->parent)
+ list_add(&clk->sibling, &clk->parent->children);
+ else
+ list_add(&clk->sibling, &root_clks);
+
+ list_add(&clk->node, &clocks);
+ if (clk->init)
+ clk->init(clk);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ mutex_lock(&clocks_mutex);
+ list_del(&clk->sibling);
+ list_del(&clk->node);
+ mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+void clk_enable_init_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &clocks, node)
+ if (clkp->flags & ENABLE_ON_INIT)
+ clk_enable(clkp);
+}
+
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name. Assumes that struct clk
+ * names are unique. Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+ struct clk *c;
+ struct clk *ret = NULL;
+
+ mutex_lock(&clocks_mutex);
+
+ list_for_each_entry(c, &clocks, node) {
+ if (!strcmp(c->name, name)) {
+ ret = c;
+ break;
+ }
+ }
+
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
+int omap_clk_enable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->allow_idle)
+ c->ops->allow_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+int omap_clk_disable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->deny_idle)
+ c->ops->deny_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+ return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+ .enable = clkll_enable_null,
+ .disable = clkll_disable_null,
+};
+
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+ .name = "dummy",
+ .ops = &clkops_null,
+};
+
+/*
+ *
+ */
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+ struct clk *ck;
+ unsigned long flags;
+
+ pr_info("clock: disabling unused clocks to save power\n");
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ list_for_each_entry(ck, &clocks, node) {
+ if (ck->ops == &clkops_null)
+ continue;
+
+ if (ck->usecount > 0 || !ck->enable_reg)
+ continue;
+
+ omap1_clk_disable_unused(ck);
+ }
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ * debugfs support to trace clock tree hierarchy and attributes
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static struct dentry *clk_debugfs_root;
+
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+ struct clk *c;
+ struct clk *pa;
+
+ mutex_lock(&clocks_mutex);
+ seq_printf(s, "%-30s %-30s %-10s %s\n",
+ "clock-name", "parent-name", "rate", "use-count");
+
+ list_for_each_entry(c, &clocks, node) {
+ pa = c->parent;
+ seq_printf(s, "%-30s %-30s %-10lu %d\n",
+ c->name, pa ? pa->name : "none", c->rate,
+ c->usecount);
+ }
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+
+static const struct file_operations debug_clock_fops = {
+ .open = clk_dbg_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+ int err;
+ struct dentry *d;
+ struct clk *pa = c->parent;
+
+ d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+ if (!d)
+ return -ENOMEM;
+ c->dent = d;
+
+ d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ return 0;
+
+err_out:
+ debugfs_remove_recursive(c->dent);
+ return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->parent;
+
+ if (pa && !pa->dent) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (!c->dent) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (!d)
+ return -ENOMEM;
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clocks, node) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
+
+ d = debugfs_create_file("summary", S_IRUGO,
+ d, NULL, &debug_clock_fops);
+ if (!d)
+ return -ENOMEM;
+
+ return 0;
+err_out:
+ debugfs_remove_recursive(clk_debugfs_root);
+ return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
#include <linux/clk.h>
+#include <linux/list.h>
-#include <plat/clock.h>
+#include <linux/clkdev.h>
+
+struct module;
+struct clk;
+
+struct omap_clk {
+ u16 cpu;
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) \
+ { \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_310 (1 << 0)
+#define CK_7XX (1 << 1) /* 7xx, 850 */
+#define CK_1510 (1 << 2)
+#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
+#define CK_1710 (1 << 4) /* 1710 extra for rate selection */
+
+
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk) (clk->name)
+#define __clk_get_parent(clk) (clk->parent)
+#define __clk_get_rate(clk) (clk->rate)
+
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware. Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+ void (*find_idlest)(struct clk *, void __iomem **,
+ u8 *, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **,
+ u8 *);
+ void (*allow_idle)(struct clk *);
+ void (*deny_idle)(struct clk *);
+};
+
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ * bits share the same register. This flag allows the
+ * omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ * should be used. This is a temporary solution - a better approach
+ * would be to associate clock type-specific data with the clock,
+ * similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL (1 << 1)
+#define CLOCK_NO_IDLE_PARENT (1 << 2)
+#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
+#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2 (1 << 5)
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named. It should be "enable_count" or
+ * something similar. "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals. (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+ struct list_head node;
+ const struct clkops *ops;
+ const char *name;
+ struct clk *parent;
+ struct list_head children;
+ struct list_head sibling; /* node for children */
+ unsigned long rate;
+ void __iomem *enable_reg;
+ unsigned long (*recalc)(struct clk *);
+ int (*set_rate)(struct clk *, unsigned long);
+ long (*round_rate)(struct clk *, unsigned long);
+ void (*init)(struct clk *);
+ u8 enable_bit;
+ s8 usecount;
+ u8 fixed_div;
+ u8 flags;
+ u8 rate_offset;
+ u8 src_offset;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+#endif
+};
+
+struct clk_functions {
+ int (*clk_enable)(struct clk *clk);
+ void (*clk_disable)(struct clk *clk);
+ long (*clk_round_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_parent)(struct clk *clk, struct clk *parent);
+ void (*clk_allow_idle)(struct clk *clk);
+ void (*clk_deny_idle)(struct clk *clk);
+ void (*clk_disable_unused)(struct clk *clk);
+};
+
+extern int mpurate;
+
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+
+extern const struct clkops clkops_null;
+
+extern struct clk dummy_ck;
int omap1_clk_init(void);
void omap1_clk_late_init(void);
#include <asm/mach-types.h> /* for machine_is_* */
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/clkdev_omap.h>
-#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
+#include "soc.h"
#include <mach/hardware.h>
#include <mach/usb.h> /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
+#include "sram.h"
/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
#define IDL_CLKOUT_ARM_SHIFT 12
* init
*/
-static struct clk_functions omap1_clk_functions = {
- .clk_enable = omap1_clk_enable,
- .clk_disable = omap1_clk_disable,
- .clk_round_rate = omap1_clk_round_rate,
- .clk_set_rate = omap1_clk_set_rate,
- .clk_disable_unused = omap1_clk_disable_unused,
-};
-
static void __init omap1_show_rates(void)
{
pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
if (!cpu_is_omap15xx())
omap_writew(0, SOFT_REQ_REG2);
- clk_init(&omap1_clk_functions);
-
/* By default all idlect1 clocks are allowed to idle */
arm_idlect1_mask = ~0;
#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
#define __ARCH_ARM_MACH_OMAP1_COMMON_H
-#include <plat/common.h>
#include <linux/mtd/mtd.h>
+#include <linux/i2c-omap.h>
+
+#include <plat/i2c.h>
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);
#endif
#ifdef CONFIG_ARCH_OMAP15XX
+void omap1510_fpga_init_irq(void);
void omap15xx_map_io(void);
#else
static inline void omap15xx_map_io(void)
static inline int ocpi_enable(void) { return 0; }
#endif
+extern u32 omap1_get_reset_sources(void);
+
#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/platform_data/omap-wd-timer.h>
+
#include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/mmc.h>
#include <mach/omap7xx.h>
#include <mach/camera.h>
#include "common.h"
#include "clock.h"
+#include "dma.h"
+#include "mmc.h"
+#include "sram.h"
#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
res[3].name = "tx";
res[3].flags = IORESOURCE_DMA;
+ if (cpu_is_omap7xx())
+ data->slots[0].features = MMC_OMAP7XX;
+ if (cpu_is_omap15xx())
+ data->slots[0].features = MMC_OMAP15XX;
+ if (cpu_is_omap16xx())
+ data->slots[0].features = MMC_OMAP16XX;
+
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret == 0)
ret = platform_device_add_data(pdev, data, sizeof(*data));
};
static struct platform_device omap_wdt_device = {
- .name = "omap_wdt",
- .id = -1,
+ .name = "omap_wdt",
+ .id = -1,
.num_resources = ARRAY_SIZE(wdt_resources),
.resource = wdt_resources,
};
static int __init omap_init_wdt(void)
{
+ struct omap_wd_timer_platform_data pdata;
+ int ret;
+
if (!cpu_is_omap16xx())
return -ENODEV;
- return platform_device_register(&omap_wdt_device);
+ pdata.read_reset_sources = omap1_get_reset_sources;
+
+ ret = platform_device_register(&omap_wdt_device);
+ if (!ret) {
+ ret = platform_device_add_data(&omap_wdt_device, &pdata,
+ sizeof(pdata));
+ if (ret)
+ platform_device_del(&omap_wdt_device);
+ }
+
+ return ret;
}
subsys_initcall(omap_init_wdt);
#endif
#include <linux/device.h>
#include <linux/io.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
#include <mach/irqs.h>
+#include "dma.h"
+
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
#define OMAP1_DMA_STRIDE 0x40
d->dev_caps = ENABLE_1510_MODE;
enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
+ if (cpu_is_omap16xx())
+ d->dev_caps = ENABLE_16XX_MODE;
+
d->dev_caps |= SRC_PORT;
d->dev_caps |= DST_PORT;
d->dev_caps |= SRC_INDEX;
--- /dev/null
+/*
+ * OMAP1 DMA channel definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __OMAP1_DMA_CHANNEL_H
+#define __OMAP1_DMA_CHANNEL_H
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE 0
+#define OMAP_DMA_MCSI1_TX 1
+#define OMAP_DMA_MCSI1_RX 2
+#define OMAP_DMA_I2C_RX 3
+#define OMAP_DMA_I2C_TX 4
+#define OMAP_DMA_EXT_NDMA_REQ 5
+#define OMAP_DMA_EXT_NDMA_REQ2 6
+#define OMAP_DMA_UWIRE_TX 7
+#define OMAP_DMA_MCBSP1_TX 8
+#define OMAP_DMA_MCBSP1_RX 9
+#define OMAP_DMA_MCBSP3_TX 10
+#define OMAP_DMA_MCBSP3_RX 11
+#define OMAP_DMA_UART1_TX 12
+#define OMAP_DMA_UART1_RX 13
+#define OMAP_DMA_UART2_TX 14
+#define OMAP_DMA_UART2_RX 15
+#define OMAP_DMA_MCBSP2_TX 16
+#define OMAP_DMA_MCBSP2_RX 17
+#define OMAP_DMA_UART3_TX 18
+#define OMAP_DMA_UART3_RX 19
+#define OMAP_DMA_CAMERA_IF_RX 20
+#define OMAP_DMA_MMC_TX 21
+#define OMAP_DMA_MMC_RX 22
+#define OMAP_DMA_NAND 23
+#define OMAP_DMA_IRQ_LCD_LINE 24
+#define OMAP_DMA_MEMORY_STICK 25
+#define OMAP_DMA_USB_W2FC_RX0 26
+#define OMAP_DMA_USB_W2FC_RX1 27
+#define OMAP_DMA_USB_W2FC_RX2 28
+#define OMAP_DMA_USB_W2FC_TX0 29
+#define OMAP_DMA_USB_W2FC_TX1 30
+#define OMAP_DMA_USB_W2FC_TX2 31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN 32
+#define OMAP_DMA_SPI_TX 33
+#define OMAP_DMA_SPI_RX 34
+#define OMAP_DMA_CRYPTO_HASH 35
+#define OMAP_DMA_CCP_ATTN 36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0 38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0 39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1 40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1 41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2 42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2 43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3 44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3 45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4 46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4 47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5 48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5 49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6 50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6 51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7 52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7 53
+#define OMAP_DMA_MMC2_TX 54
+#define OMAP_DMA_MMC2_RX 55
+#define OMAP_DMA_CRYPTO_DES_OUT 56
+
+#endif /* __OMAP1_DMA_CHANNEL_H */
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/flash.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <plat/fpga.h>
-
#include <mach/hardware.h>
#include "iomap.h"
+#include "common.h"
+#include "fpga.h"
static void fpga_mask_irq(struct irq_data *d)
{
--- /dev/null
+/*
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+/*
+ * ---------------------------------------------------------------------------
+ * H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
+#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
+#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
+#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
+#define H2P2_DBG_FPGA_LED_RED (1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE (1 << 12)
+/* cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
+
+#endif
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <mach/irqs.h>
+
#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
#define OMAP1510_GPIO_BASE 0xFFFCE000
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <mach/irqs.h>
+
#define OMAP1610_GPIO1_BASE 0xfffbe400
#define OMAP1610_GPIO2_BASE 0xfffbec00
#define OMAP1610_GPIO3_BASE 0xfffbb400
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <mach/irqs.h>
+
#define OMAP7XX_GPIO1_BASE 0xfffbc000
#define OMAP7XX_GPIO2_BASE 0xfffbc800
#define OMAP7XX_GPIO3_BASE 0xfffbd000
*
*/
-#include <plat/i2c.h>
+#include <linux/i2c-omap.h>
#include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
+
+#include <plat/i2c.h>
+
+#define OMAP_I2C_SIZE 0x3f
+#define OMAP1_I2C_BASE 0xfffb3800
+#define OMAP1_INT_I2C (32 + 4)
+
+static const char name[] = "omap_i2c";
-void __init omap1_i2c_mux_pins(int bus_id)
+static struct resource i2c_resources[2] = {
+};
+
+static struct platform_device omap_i2c_devices[1] = {
+};
+
+static void __init omap1_i2c_mux_pins(int bus_id)
{
if (cpu_is_omap7xx()) {
omap_cfg_reg(I2C_7XX_SDA);
omap_cfg_reg(I2C_SCL);
}
}
+
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
+ int bus_id)
+{
+ struct platform_device *pdev;
+ struct resource *res;
+
+ if (bus_id > 1)
+ return -EINVAL;
+
+ omap1_i2c_mux_pins(bus_id);
+
+ pdev = &omap_i2c_devices[bus_id - 1];
+ pdev->id = bus_id;
+ pdev->name = name;
+ pdev->num_resources = ARRAY_SIZE(i2c_resources);
+ res = i2c_resources;
+ res[0].start = OMAP1_I2C_BASE;
+ res[0].end = res[0].start + OMAP_I2C_SIZE;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = OMAP1_INT_I2C;
+ res[1].flags = IORESOURCE_IRQ;
+ pdev->resource = res;
+
+ /* all OMAP1 have IP version 1 register set */
+ pdata->rev = OMAP_I2C_IP_VERSION_1;
+
+ /* all OMAP1 I2C are implemented like this */
+ pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
+ OMAP_I2C_FLAG_SIMPLE_CLOCK |
+ OMAP_I2C_FLAG_16BIT_DATA_REG |
+ OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
+
+ /* how the cpu bus is wired up differs for 7xx only */
+
+ if (cpu_is_omap7xx())
+ pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
+ else
+ pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+
+ pdev->dev.platform_data = pdata;
+
+ return platform_device_register(pdev);
+}
#include <linux/io.h>
#include <asm/system_info.h>
-#include <plat/cpu.h>
+#include "soc.h"
#include <mach/hardware.h>
#include <linux/serial_reg.h>
-#include <plat/serial.h>
+#include "serial.h"
.pushsection .data
omap_uart_phys: .word 0x0
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include "../../iomap.h"
-
.macro get_irqnr_preamble, base, tmp
.endm
+++ /dev/null
-/*
- * arch/arm/mach-omap1/include/mach/gpio.h
- */
#include <asm/sizes.h>
#ifndef __ASSEMBLER__
#include <asm/types.h>
-#include <plat/cpu.h>
+#include <mach/soc.h>
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
extern void omap_writew(u16 v, u32 pa);
extern void omap_writel(u32 v, u32 pa);
-#include <plat/tc.h>
+#include <mach/tc.h>
/* Almost all documentation for chip and board memory maps assumes
* BM is clear. Most devel boards have a switch to control booting
#endif /* ifndef __ASSEMBLER__ */
-#include <plat/serial.h>
+#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
+
+#include <mach/serial.h>
/*
* ---------------------------------------------------------------------------
* because of the strncmp().
*/
#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-#include <plat/cpu.h>
+#include <mach/soc.h>
/*
* OMAP-1510 Local Bus address offset
#define OMAP1510_DSP_MMU_BASE (0xfffed200)
+/*
+ * ---------------------------------------------------------------------------
+ * OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */
+#define OMAP1510_FPGA_SIZE SZ_4K
+#define OMAP1510_FPGA_START 0x08000000 /* PA */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1)
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE 0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */
+#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */
+#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */
+#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd (1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
+
#endif /* __ASM_ARCH_OMAP15XX_H */
--- /dev/null
+/*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <linux/init.h>
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ * uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ * and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO_OFS 0x3ffc
+
+/* OMAP1 serial ports */
+#define OMAP1_UART1_BASE 0xfffb0000
+#define OMAP1_UART2_BASE 0xfffb0800
+#define OMAP1_UART3_BASE 0xfffb9800
+
+#define OMAP_PORT_SHIFT 2
+#define OMAP7XX_PORT_SHIFT 0
+
+#define OMAP1510_BASE_BAUD (12000000/16)
+#define OMAP16XX_BASE_BAUD (48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1 11
+#define OMAP1UART2 12
+#define OMAP1UART3 13
+
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+#endif
+
+#endif
--- /dev/null
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap16xx
+# endif
+#endif
+
+/*
+ * omap_rev bits:
+ * CPU id bits (0730, 1510, 1710, 2422...) [31:16]
+ * CPU revision (See _REV_ defined in cpu.h) [15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
+ */
+unsigned int omap_rev(void);
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx(): True for OMAP730, OMAP850
+ * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
+ */
+#define GET_OMAP_CLASS (omap_rev() & 0xff)
+
+#define IS_OMAP_CLASS(class, id) \
+static inline int is_omap ##class (void) \
+{ \
+ return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id) \
+static inline int is_omap ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+
+#define cpu_is_omap7xx() 0
+#define cpu_is_omap15xx() 0
+#define cpu_is_omap16xx() 0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap15xx
+# define cpu_is_omap15xx() is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap16xx
+# define cpu_is_omap16xx() is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap15xx
+# define cpu_is_omap15xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap16xx
+# define cpu_is_omap16xx() 1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap310(): True for OMAP310
+ * cpu_is_omap1510(): True for OMAP1510
+ * cpu_is_omap1610(): True for OMAP1610
+ * cpu_is_omap1611(): True for OMAP1611
+ * cpu_is_omap5912(): True for OMAP5912
+ * cpu_is_omap1621(): True for OMAP1621
+ * cpu_is_omap1710(): True for OMAP1710
+ */
+#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id) \
+static inline int is_omap ##type (void) \
+{ \
+ return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+
+#define cpu_is_omap310() 0
+#define cpu_is_omap1510() 0
+#define cpu_is_omap1610() 0
+#define cpu_is_omap5912() 0
+#define cpu_is_omap1611() 0
+#define cpu_is_omap1621() 0
+#define cpu_is_omap1710() 0
+
+/* These are needed to compile common code */
+#ifdef CONFIG_ARCH_OMAP1
+#define cpu_is_omap242x() 0
+#define cpu_is_omap2430() 0
+#define cpu_is_omap243x() 0
+#define cpu_is_omap24xx() 0
+#define cpu_is_omap34xx() 0
+#define cpu_is_omap44xx() 0
+#define soc_is_omap54xx() 0
+#define soc_is_am33xx() 0
+#define cpu_class_is_omap1() 1
+#define cpu_class_is_omap2() 0
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 310 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap310
+# undef cpu_is_omap1510
+# define cpu_is_omap310() is_omap310()
+# define cpu_is_omap1510() is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap1610
+# undef cpu_is_omap1611
+# undef cpu_is_omap5912
+# undef cpu_is_omap1621
+# undef cpu_is_omap1710
+# define cpu_is_omap1610() is_omap1610()
+# define cpu_is_omap1611() is_omap1611()
+# define cpu_is_omap5912() is_omap5912()
+# define cpu_is_omap1621() is_omap1621()
+# define cpu_is_omap1710() is_omap1710()
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif
/*
- * arch/arm/mach-omap1/include/mach/uncompress.h
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
*/
-#include <plat/uncompress.h>
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+
+#include "serial.h"
+
+#define MDR1_MODE_MASK 0x07
+
+volatile u8 *uart_base;
+int uart_shift;
+
+/*
+ * Store the DEBUG_LL uart number into memory.
+ * See also debug-macro.S, and serial.c for related code.
+ */
+static void set_omap_uart_info(unsigned char port)
+{
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart_shift & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+ *uart_info = port;
+}
+
+static void putc(int c)
+{
+ if (!uart_base)
+ return;
+
+ /* Check for UART 16x mode */
+ if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+ return;
+
+ while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
+ barrier();
+ uart_base[UART_TX << uart_shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
+ if (machine_is_##mach()) { \
+ uart_base = (volatile u8 *)(dbg_uart); \
+ uart_shift = (dbg_shft); \
+ port = (dbg_id); \
+ set_omap_uart_info(port); \
+ break; \
+ }
+
+#define DEBUG_LL_OMAP7XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
+ OMAP1UART##p)
+
+#define DEBUG_LL_OMAP1(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP1UART##p)
+
+static inline void arch_decomp_setup(void)
+{
+ int port = 0;
+
+ /*
+ * Initialize the port based on the machine ID from the bootloader.
+ * Note that we're using macros here instead of switch statement
+ * as machine_is functions are optimized out for the boards that
+ * are not selected.
+ */
+ do {
+ /* omap7xx/8xx based boards using UART1 with shift 0 */
+ DEBUG_LL_OMAP7XX(1, herald);
+ DEBUG_LL_OMAP7XX(1, omap_perseus2);
+
+ /* omap15xx/16xx based boards using UART1 */
+ DEBUG_LL_OMAP1(1, ams_delta);
+ DEBUG_LL_OMAP1(1, nokia770);
+ DEBUG_LL_OMAP1(1, omap_h2);
+ DEBUG_LL_OMAP1(1, omap_h3);
+ DEBUG_LL_OMAP1(1, omap_innovator);
+ DEBUG_LL_OMAP1(1, omap_osk);
+ DEBUG_LL_OMAP1(1, omap_palmte);
+ DEBUG_LL_OMAP1(1, omap_palmz71);
+
+ /* omap15xx/16xx based boards using UART2 */
+ DEBUG_LL_OMAP1(2, omap_palmtt);
+
+ /* omap15xx/16xx based boards using UART3 */
+ DEBUG_LL_OMAP1(3, sx1);
+ } while (0);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
#include <asm/mach/map.h>
#include <mach/mux.h>
-#include <plat/tc.h>
-#include <plat/dma.h>
+#include <mach/tc.h>
+#include <plat-omap/dma-omap.h>
#include "iomap.h"
#include "common.h"
*/
omap1_clk_init();
omap1_mux_init();
- omap_init_consistent_dma_size();
}
void __init omap1_init_late(void)
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
-#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
-
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <plat/cpu.h>
+#include "soc.h"
#include <mach/hardware.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/hardware.h>
#include <mach/lcdc.h>
+#include "dma.h"
+
int omap_lcd_dma_running(void)
{
/*
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <mach/irqs.h>
#include "iomap.h"
+#include "dma.h"
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
--- /dev/null
+#include <linux/mmc/host.h>
+#include <linux/platform_data/mmc-omap.h>
+
+#define OMAP15XX_NR_MMC 1
+#define OMAP16XX_NR_MMC 2
+#define OMAP1_MMC_SIZE 0x080
+#define OMAP1_MMC1_BASE 0xfffb7800
+#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+ int nr_controllers);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+ int nr_controllers)
+{
+}
+#endif
* published by the Free Software Foundation.
*/
-#include <plat/clkdev_omap.h>
+#include "clock.h"
#include "opp.h"
/*-------------------------------------------------------------------------
#include <linux/io.h>
#include <linux/atomic.h>
+#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include <asm/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
#include <mach/irqs.h>
#include "iomap.h"
+#include "clock.h"
#include "pm.h"
+#include "sram.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
#include <linux/clk.h>
#include <linux/err.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
+#include "soc.h"
#ifdef CONFIG_PM_RUNTIME
static int omap1_pm_runtime_suspend(struct device *dev)
#include <linux/kernel.h>
#include <linux/io.h>
-#include <plat/prcm.h>
-
#include <mach/hardware.h>
+#include "iomap.h"
#include "common.h"
+/* ARM_SYSST bit shifts related to SoC reset sources */
+#define ARM_SYSST_POR_SHIFT 5
+#define ARM_SYSST_EXT_RST_SHIFT 4
+#define ARM_SYSST_ARM_WDRST_SHIFT 2
+#define ARM_SYSST_GLOB_SWRST_SHIFT 1
+
+/* Standardized reset source bits (across all OMAP SoCs) */
+#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0
+#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1
+#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3
+#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5
+
+
void omap1_restart(char mode, const char *cmd)
{
/*
omap_writew(1, ARM_RSTCT1);
}
+
+/**
+ * omap1_get_reset_sources - return the source of the SoC's last reset
+ *
+ * Returns bits that represent the last reset source for the SoC. The
+ * format is standardized across OMAPs for use by the OMAP watchdog.
+ */
+u32 omap1_get_reset_sources(void)
+{
+ u32 ret = 0;
+ u16 rs;
+
+ rs = __raw_readw(OMAP1_IO_ADDRESS(ARM_SYSST));
+
+ if (rs & (1 << ARM_SYSST_POR_SHIFT))
+ ret |= 1 << OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT;
+ if (rs & (1 << ARM_SYSST_EXT_RST_SHIFT))
+ ret |= 1 << OMAP_EXTWARM_RST_SRC_ID_SHIFT;
+ if (rs & (1 << ARM_SYSST_ARM_WDRST_SHIFT))
+ ret |= 1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT;
+ if (rs & (1 << ARM_SYSST_GLOB_SWRST_SHIFT))
+ ret |= 1 << OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT;
+
+ return ret;
+}
#include <asm/mach-types.h>
#include <mach/mux.h>
-#include <plat/fpga.h>
#include "pm.h"
#include <asm/assembler.h>
+#include <mach/hardware.h>
+
#include "iomap.h"
#include "pm.h"
--- /dev/null
+/*
+ * We can move mach/soc.h here once the drivers are fixed
+ */
+#include <mach/soc.h>
--- /dev/null
+/*
+ * OMAP SRAM detection and management
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fncpy.h>
+#include <asm/tlb.h>
+#include <asm/cacheflush.h>
+
+#include <asm/mach/map.h>
+
+#include "soc.h"
+#include "sram.h"
+
+#define OMAP1_SRAM_PA 0x20000000
+#define SRAM_BOOTLOADER_SZ 0x80
+
+/*
+ * The amount of SRAM depends on the core type.
+ * Note that we cannot try to test for SRAM here because writes
+ * to secure SRAM will hang the system. Also the SRAM is not
+ * yet mapped at this point.
+ */
+static void __init omap_detect_and_map_sram(void)
+{
+ unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ;
+ unsigned long omap_sram_start = OMAP1_SRAM_PA;
+ unsigned long omap_sram_size;
+
+ if (cpu_is_omap7xx())
+ omap_sram_size = 0x32000; /* 200K */
+ else if (cpu_is_omap15xx())
+ omap_sram_size = 0x30000; /* 192K */
+ else if (cpu_is_omap1610() || cpu_is_omap1611() ||
+ cpu_is_omap1621() || cpu_is_omap1710())
+ omap_sram_size = 0x4000; /* 16K */
+ else {
+ pr_err("Could not detect SRAM size\n");
+ omap_sram_size = 0x4000;
+ }
+
+ omap_map_sram(omap_sram_start, omap_sram_size,
+ omap_sram_skip, 1);
+}
+
+static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
+
+void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
+{
+ BUG_ON(!_omap_sram_reprogram_clock);
+ /* On 730, bit 13 must always be 1 */
+ if (cpu_is_omap7xx())
+ ckctl |= 0x2000;
+ _omap_sram_reprogram_clock(dpllctl, ckctl);
+}
+
+int __init omap_sram_init(void)
+{
+ omap_detect_and_map_sram();
+ _omap_sram_reprogram_clock =
+ omap_sram_push(omap1_sram_reprogram_clock,
+ omap1_sram_reprogram_clock_sz);
+
+ return 0;
+}
--- /dev/null
+#include <plat/sram.h>
+
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#include <plat/counter-32k.h>
#include <plat/dmtimer.h>
#include <mach/hardware.h>
#endif
-u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
+static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
{
u32 syscon1 = 0;
return syscon1 << 16;
}
-u32 __init omap1_usb1_init(unsigned nwires)
+static u32 __init omap1_usb1_init(unsigned nwires)
{
u32 syscon1 = 0;
return syscon1 << 20;
}
-u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
+static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
{
u32 syscon1 = 0;
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
- common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o
-
-# INTCPS IP block support - XXX should be moved to drivers/
-obj-$(CONFIG_ARCH_OMAP2) += irq.o
-obj-$(CONFIG_ARCH_OMAP3) += irq.o
-obj-$(CONFIG_SOC_AM33XX) += irq.o
-
-# Secure monitor API support
-obj-$(CONFIG_ARCH_OMAP3) += omap-smc.o omap-secure.o
-obj-$(CONFIG_ARCH_OMAP4) += omap-smc.o omap-secure.o
-obj-$(CONFIG_SOC_OMAP5) += omap-smc.o omap-secure.o
+ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
+ omap_device.o sram.o
+
+omap-2-3-common = irq.o
+hwmod-common = omap_hwmod.o \
+ omap_hwmod_common_data.o
+clock-common = clock.o clock_common_data.o \
+ clkt_dpll.o clkt_clksel.o
+secure-common = omap-smc.o omap-secure.o
+
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
+obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
endif
-obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
-obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o
-obj-$(CONFIG_SOC_OMAP5) += omap4-common.o omap-wakeupgen.o
+omap-4-5-common = omap4-common.o omap-wakeupgen.o \
+ sleep44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common)
+obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common)
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_sram243x.o :=-Wa,-march=armv6
AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
+# Restart code (OMAP4/5 currently in omap4-common.c)
+obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o
+obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o
+obj-$(CONFIG_ARCH_OMAP3) += omap3-restart.o
+
# Pin multiplexing
obj-$(CONFIG_SOC_OMAP2420) += mux2420.o
obj-$(CONFIG_SOC_OMAP2430) += mux2430.o
# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
-obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
# OPP table initialization
ifeq ($(CONFIG_PM_OPP),y)
# Power Management
ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
+obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
-obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o
-obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o sleep44xx.o
+obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
+obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
-obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
endif
ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
+obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
endif
# PRCM
-obj-y += prcm.o prm_common.o
-obj-$(CONFIG_ARCH_OMAP2) += cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3) += cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-y += prm_common.o cm_common.o
+obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o
omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \
prcm_mpu44xx.o prminst44xx.o \
- vc44xx_data.o vp44xx_data.o \
- prm44xx.o
+ vc44xx_data.o vp44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
# OMAP voltage domains
-obj-y += voltage.o vc.o vp.o
+voltagedomain-common := voltage.o vc.o vp.o
+obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
+obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common)
+obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common)
# OMAP powerdomain framework
-obj-y += powerdomain.o powerdomain-common.o
+powerdomain-common += powerdomain.o powerdomain-common.o
+obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o
-obj-$(CONFIG_ARCH_OMAP2) += powerdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3) += powerdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common)
obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o
+obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common)
# PRCM clockdomain control
-obj-y += clockdomain.o
-obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o
+clockdomain-common += clockdomain.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
-obj-$(CONFIG_ARCH_OMAP3) += clockdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common)
obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o
+obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common)
# Clock framework
-obj-y += clock.o clock_common_data.o \
- clkt_dpll.o clkt_clksel.o
-obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o clkt2xxx_sys.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_sys.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += clock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM33XX) += dpll3xxx.o clock33xx_data.o
+obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o
+obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
# hwmod data
-obj-y += omap_hwmod_common_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
-obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
+obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
#define AM33XX_SCM_BASE 0x44E10000
#define AM33XX_CTRL_BASE AM33XX_SCM_BASE
#define AM33XX_PRCM_BASE 0x44E00000
+#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + 0x3FC)
#endif /* __ASM_ARCH_AM33XX_H */
#include <linux/err.h>
#include <linux/davinci_emac.h>
#include <asm/system.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "am35xx.h"
#include "control.h"
#include "am35xx-emac.h"
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/gpmc.h>
-#include <plat/usb.h>
+#include "gpmc.h"
#include "gpmc-smc91x.h"
#include <video/omapdss.h>
.init_machine = omap_2430sdp_init,
.init_late = omap2430_init_late,
.timer = &omap2_timer,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/usb.h>
#include "common.h"
-#include <plat/dma.h>
-#include <plat/gpmc.h>
+#include <plat-omap/dma-omap.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
+#include "gpmc.h"
#include "gpmc-smc91x.h"
+#include "soc.h"
#include "board-flash.h"
#include "mux.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
.init_machine = omap_3430sdp_init,
.init_late = omap3430_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include "common.h"
#include "gpmc-smc91x.h"
-#include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
#include "board-flash.h"
#include "mux.h"
.init_machine = omap_sdp_init,
.init_late = omap3630_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <linux/leds.h>
#include <linux/leds_pwm.h>
#include <linux/platform_data/omap4-keypad.h>
+#include <linux/usb/musb.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
-#include <plat/mmc.h>
#include "omap4-keypad.h"
#include <video/omapdss.h>
#include <video/omap-panel-nokia-dsi.h>
#include "soc.h"
#include "mux.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"
.init_machine = omap_4430sdp_init,
.init_late = omap4430_init_late,
.timer = &omap4_timer,
- .restart = omap_prcm_restart,
+ .restart = omap44xx_restart,
MACHINE_END
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include "am35xx-emac.h"
#include "mux.h"
.init_machine = am3517_crane_init,
.init_late = am35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <linux/can/platform/ti_hecc.h>
#include <linux/davinci_emac.h>
#include <linux/mmc/host.h>
+#include <linux/usb/musb.h>
#include <linux/platform_data/gpio-omap.h>
#include "am35xx.h"
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
.init_machine = am3517_evm_init,
.init_late = am35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <linux/clk.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
+#include <linux/platform_data/leds-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <plat/led.h>
#include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
.init_machine = omap_apollon_init,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "common.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <mach/hardware.h>
-
+#include "common.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-nand.h"
#define CM_T35_GPIO_PENDOWN 57
#define SB_T35_USB_HUB_RESET_GPIO 167
static void __init cm_t35_init_nand(void)
{
- if (gpmc_nand_init(&cm_t35_nand_data) < 0)
+ if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
pr_err("CM-T35: Unable to register NAND device\n");
}
#else
.init_machine = cm_t35_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(CM_T3730, "Compulab CM-T3730")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap3630_init_early,
- .init_irq = omap3_init_irq,
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap3630_init_early,
+ .init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
- .init_machine = cm_t3730_init,
+ .init_machine = cm_t3730_init,
.init_late = omap3630_init_late,
- .timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .timer = &omap3_timer,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "am35xx.h"
#include "control.h"
#include "common-board-devices.h"
#include "am35xx-emac.h"
+#include "gpmc-nand.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
static void __init cm_t3517_init_nand(void)
{
- if (gpmc_nand_init(&cm_t3517_nand_data) < 0)
+ if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0)
pr_err("CM-T3517: NAND initialization failed\n");
}
#else
.init_machine = cm_t3517_init,
.init_late = am35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <asm/mach/flash.h>
#include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mux.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
#define OMAP_DM9000_GPIO_IRQ 25
#define OMAP3_DEVKIT_TS_GPIO 27
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
- ARRAY_SIZE(devkit8000_nand_partitions));
+ board_nand_init(devkit8000_nand_partitions,
+ ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
omap_twl4030_audio_init("omap3beagle");
/* Ensure SDRC pins are mux'd for self-refresh */
.init_machine = devkit8000_init,
.init_late = omap35xx_init_late,
.timer = &omap3_secure_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <linux/mtd/physmap.h>
#include <linux/io.h>
-#include <plat/cpu.h>
-#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
-#include <plat/tc.h>
+#include "soc.h"
#include "common.h"
#include "board-flash.h"
+#include "gpmc-onenand.h"
+#include "gpmc-nand.h"
#define REG_FPGA_REV 0x10
#define REG_FPGA_DIP_SWITCH_INPUT2 0x60
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
/* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
+struct gpmc_timings nand_default_timings[1] = {
+ {
+ .sync_clk = 0,
- .sync_clk = 0,
+ .cs_on = 0,
+ .cs_rd_off = 36,
+ .cs_wr_off = 36,
- .cs_on = 0,
- .cs_rd_off = 36,
- .cs_wr_off = 36,
+ .adv_on = 6,
+ .adv_rd_off = 24,
+ .adv_wr_off = 36,
- .adv_on = 6,
- .adv_rd_off = 24,
- .adv_wr_off = 36,
+ .we_off = 30,
+ .oe_off = 48,
- .we_off = 30,
- .oe_off = 48,
+ .access = 54,
+ .rd_cycle = 72,
+ .wr_cycle = 72,
- .access = 54,
- .rd_cycle = 72,
- .wr_cycle = 72,
-
- .wr_access = 30,
- .wr_data_mux_bus = 0,
+ .wr_access = 30,
+ .wr_data_mux_bus = 0,
+ },
};
-static struct omap_nand_platform_data board_nand_data = {
- .gpmc_t = &nand_timings,
-};
+static struct omap_nand_platform_data board_nand_data;
void
-__init board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type)
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
+ int nand_type, struct gpmc_timings *gpmc_t)
{
board_nand_data.cs = cs;
board_nand_data.parts = nand_parts;
board_nand_data.devsize = nand_type;
board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
- gpmc_nand_init(&board_nand_data);
+ gpmc_nand_init(&board_nand_data, gpmc_t);
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
pr_err("NAND: Unable to find configuration in GPMC\n");
else
board_nand_init(partition_info[2].parts,
- partition_info[2].nr_parts, nandcs, nand_type);
+ partition_info[2].nr_parts, nandcs,
+ nand_type, nand_default_timings);
}
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#define PDC_NOR 1
#define PDC_NAND 2
#if defined(CONFIG_MTD_NAND_OMAP2) || \
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type);
+ u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
+extern struct gpmc_timings nand_default_timings[];
#else
static inline void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type)
+ u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
{
}
+#define nand_default_timings NULL
#endif
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap242x_boards_compat,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
#endif
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap243x_boards_compat,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
#endif
.init_machine = omap_generic_init,
.timer = &omap3_timer,
.dt_compat = omap3_boards_compat,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
+MACHINE_END
+
+static const char *omap3_gp_boards_compat[] __initdata = {
+ "ti,omap3-beagle",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap3430_init_early,
+ .init_irq = omap_intc_of_init,
+ .handle_irq = omap3_intc_handle_irq,
+ .init_machine = omap_generic_init,
+ .timer = &omap3_secure_timer,
+ .dt_compat = omap3_gp_boards_compat,
+ .restart = omap3xxx_restart,
MACHINE_END
#endif
.init_late = omap4430_init_late,
.timer = &omap4_timer,
.dt_compat = omap4_boards_compat,
- .restart = omap_prcm_restart,
+ .restart = omap44xx_restart,
MACHINE_END
#endif
.init_machine = omap_generic_init,
.timer = &omap5_timer,
.dt_compat = omap5_boards_compat,
- .restart = omap_prcm_restart,
+ .restart = omap44xx_restart,
MACHINE_END
#endif
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/menelaus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/menelaus.h>
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-#include "debug-devices.h"
+#include <plat-omap/dma-omap.h>
+#include <plat/debug-devices.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include "common.h"
#include "mux.h"
#include "control.h"
+#include "gpmc.h"
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
.init_machine = omap_h4_init,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include "common.h"
-#include <plat/gpmc.h>
-#include <plat/usb.h>
-
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include "common.h"
+#include "gpmc.h"
#include "mux.h"
#include "hsmmc.h"
#include "sdram-numonyx-m65kxxxxam.h"
#include "common-board-devices.h"
#include "board-flash.h"
#include "control.h"
+#include "gpmc-onenand.h"
#define IGEP2_SMSC911X_CS 5
#define IGEP2_SMSC911X_GPIO 176
pr_info("IGEP: initializing NAND memory device\n");
board_nand_init(igep_flash_partitions,
ARRAY_SIZE(igep_flash_partitions),
- 0, NAND_BUSWIDTH_16);
+ 0, NAND_BUSWIDTH_16, nand_default_timings);
} else if (mux == IGEP_SYSBOOT_ONENAND) {
pr_info("IGEP: initializing OneNAND memory device\n");
board_onenand_init(igep_flash_partitions,
.init_machine = igep_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
.init_machine = igep_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/gpmc.h>
-#include <mach/board-zoom.h>
-#include <plat/usb.h>
+#include "board-zoom.h"
+#include "gpmc.h"
#include "gpmc-smsc911x.h"
#include <video/omapdss.h>
omap_serial_init();
omap_sdrc_init(NULL, NULL);
usb_musb_init(NULL);
- board_nand_init(ldp_nand_partitions,
- ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
+ board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
+ ZOOM_NAND_CS, 0, nand_default_timings);
omap_hsmmc_init(mmc);
ldp_display_init();
.init_machine = omap_ldp_init,
.init_late = omap3430_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <linux/usb/musb.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/mfd/menelaus.h>
#include <sound/tlv320aic3x.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include "common.h"
-#include <plat/menelaus.h>
-#include <plat/mmc.h>
+#include "mmc.h"
#include "mux.h"
+#include "gpmc-onenand.h"
#define TUSB6010_ASYNC_CS 1
#define TUSB6010_SYNC_CS 4
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "common.h"
+#include "omap_device.h"
+#include "gpmc.h"
+#include "soc.h"
#include "mux.h"
#include "hsmmc.h"
#include "pm.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
/*
* OMAP3 Beagle revision
* Run time detection of Beagle revision is done by reading GPIO.
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
- ARRAY_SIZE(omap3beagle_nand_partitions));
+ board_nand_init(omap3beagle_nand_partitions,
+ ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
omap_twl4030_audio_init("omap3beagle");
/* Ensure msecure is mux'd to be able to set the RTC. */
.init_machine = omap3_beagle_init,
.init_late = omap3_init_late,
.timer = &omap3_secure_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl.h>
#include <linux/usb/otg.h>
+#include <linux/usb/musb.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/smsc911x.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/usb.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include "common.h"
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
+#include "soc.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "board-flash.h"
+
+#define NAND_CS 0
#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
}
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
- ARRAY_SIZE(omap3evm_nand_partitions));
+ board_nand_init(omap3evm_nand_partitions,
+ ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
.init_machine = omap3_evm_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "gpmc-smsc911x.h"
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-#include <plat/usb.h>
-
#include "common.h"
#include "mux.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-smsc911x.h"
#define OMAP3LOGIC_SMSC911X_CS 1
.init_machine = omap3logic_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
.init_machine = omap3logic_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "gpmc-nand.h"
#define PANDORA_WIFI_IRQ_GPIO 21
#define PANDORA_WIFI_NRESET_GPIO 23
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
usbhs_init(&usbhs_bdata);
usb_musb_init(NULL);
- gpmc_nand_init(&pandora_nand_data);
+ gpmc_nand_init(&pandora_nand_data, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
.init_machine = omap3pandora_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <asm/mach/flash.h>
#include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
.init_machine = omap3_stalker_init,
.init_late = omap35xx_init_late,
.timer = &omap3_secure_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <asm/system_info.h>
#include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
#include "mux.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
#include <asm/setup.h>
#define TB_BL_PWM_TIMER 9
#define TB_KILL_POWER_GPIO 168
+#define NAND_CS 0
+
static unsigned long touchbook_revision;
static struct mtd_partition omap3touchbook_nand_partitions[] = {
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
- ARRAY_SIZE(omap3touchbook_nand_partitions));
+ board_nand_init(omap3touchbook_nand_partitions,
+ ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
.init_machine = omap3_touchbook_init,
.init_late = omap3430_init_late,
.timer = &omap3_secure_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/ti_wilink_st.h>
+#include <linux/usb/musb.h>
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
#include <asm/mach/map.h>
#include <video/omapdss.h>
-#include "common.h"
-#include <plat/usb.h>
-#include <plat/mmc.h>
#include <video/omap-panel-tfp410.h>
+#include "common.h"
#include "soc.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
#include "mux.h"
.init_machine = omap4_panda_init,
.init_late = omap4430_init_late,
.timer = &omap4_timer,
- .restart = omap_prcm_restart,
+ .restart = omap44xx_restart,
MACHINE_END
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
-#include <plat/usb.h>
+#include "common.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
+#include "gpmc.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
#define OVERO_GPIO_BT_XGATE 15
#define OVERO_GPIO_W2W_NRESET 16
#define OVERO_GPIO_PENDOWN 114
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- omap_nand_flash_init(0, overo_nand_partitions,
- ARRAY_SIZE(overo_nand_partitions));
+ board_nand_init(overo_nand_partitions,
+ ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
overo_spi_init();
.init_machine = overo_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <plat/i2c.h>
-#include <plat/mmc.h>
-#include <plat/usb.h>
-#include <plat/gpmc.h>
#include "common.h"
-#include <plat/serial.h>
-
#include "mux.h"
+#include "gpmc.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "sdram-nokia.h"
#include "common-board-devices.h"
+#include "gpmc-onenand.h"
static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
.init_machine = rm680_init,
.init_late = omap3630_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
.init_machine = rm680_init,
.init_late = omap3630_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <asm/system_info.h>
#include "common.h"
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-#include <plat/omap-pm.h>
+#include <plat-omap/dma-omap.h>
#include "gpmc-smc91x.h"
#include "board-rx51.h"
#endif
#include "mux.h"
+#include "omap-pm.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-onenand.h"
#define SYSTEM_REV_B_USES_VAUX3 0x1699
#define SYSTEM_REV_S_USES_VAUX3 0x8
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/usb/musb.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "common.h"
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-#include <plat/usb.h>
+#include <plat-omap/dma-omap.h>
+#include "common.h"
#include "mux.h"
+#include "gpmc.h"
#include "pm.h"
#include "sdram-nokia.h"
.init_machine = rx51_init,
.init_late = omap3430_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
*/
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/usb/musb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
static struct omap_musb_board_data musb_board_data = {
.set_phy_power = ti81xx_musb_phy_power,
.timer = &omap3_timer,
.init_machine = ti81xx_evm_init,
.init_late = ti81xx_init_late,
- .restart = omap_prcm_restart,
+ .restart = omap44xx_restart,
MACHINE_END
MACHINE_START(TI8148EVM, "ti8148evm")
.timer = &omap3_timer,
.init_machine = ti81xx_evm_init,
.init_late = ti81xx_init_late,
- .restart = omap_prcm_restart,
+ .restart = omap44xx_restart,
MACHINE_END
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "gpmc-smsc911x.h"
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
#include "soc.h"
#include "common.h"
#include <linux/spi/spi.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
+#include "soc.h"
#include "common.h"
#define LCD_PANEL_RESET_GPIO_PROD 96
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
#include "mux.h"
#include "hsmmc.h"
#include <asm/mach/arch.h>
#include "common.h"
-#include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
#include "board-flash.h"
#include "mux.h"
usbhs_init(&usbhs_bdata);
}
- board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
- ZOOM_NAND_CS, NAND_BUSWIDTH_16);
+ board_nand_init(zoom_nand_partitions,
+ ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
+ NAND_BUSWIDTH_16, nand_default_timings);
zoom_debugboard_init();
zoom_peripherals_init();
.init_machine = omap_zoom_init,
.init_late = omap3430_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
.init_machine = omap_zoom_init,
.init_late = omap3630_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-#include <plat/prcm.h>
#include "clock.h"
#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
#define APLLS_CLKIN_13MHZ 2
#define APLLS_CLKIN_12MHZ 3
-void __iomem *cm_idlest_pll;
-
/* Private functions */
-/* Enable an APLL if off */
-static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
-{
- u32 cval, apll_mask;
-
- apll_mask = EN_APLL_LOCKED << clk->enable_bit;
-
- cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-
- if ((cval & apll_mask) == apll_mask)
- return 0; /* apll already enabled */
-
- cval &= ~apll_mask;
- cval |= apll_mask;
- omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-
- omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
- OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk));
-
- /*
- * REVISIT: Should we return an error code if omap2_wait_clock_ready()
- * fails?
- */
- return 0;
-}
-
-static int omap2_clk_apll96_enable(struct clk *clk)
+static int _apll96_enable(struct clk *clk)
{
- return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL_MASK);
+ return omap2xxx_cm_apll96_enable();
}
-static int omap2_clk_apll54_enable(struct clk *clk)
+static int _apll54_enable(struct clk *clk)
{
- return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK);
+ return omap2xxx_cm_apll54_enable();
}
static void _apll96_allow_idle(struct clk *clk)
omap2xxx_cm_set_apll54_disable_autoidle();
}
-/* Stop APLL */
-static void omap2_clk_apll_disable(struct clk *clk)
+static void _apll96_disable(struct clk *clk)
{
- u32 cval;
+ omap2xxx_cm_apll96_disable();
+}
- cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
- cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
- omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+static void _apll54_disable(struct clk *clk)
+{
+ omap2xxx_cm_apll54_disable();
}
/* Public data */
const struct clkops clkops_apll96 = {
- .enable = omap2_clk_apll96_enable,
- .disable = omap2_clk_apll_disable,
+ .enable = _apll96_enable,
+ .disable = _apll96_disable,
.allow_idle = _apll96_allow_idle,
.deny_idle = _apll96_deny_idle,
};
const struct clkops clkops_apll54 = {
- .enable = omap2_clk_apll54_enable,
- .disable = omap2_clk_apll_disable,
+ .enable = _apll54_enable,
+ .disable = _apll54_disable,
.allow_idle = _apll54_allow_idle,
.deny_idle = _apll54_deny_idle,
};
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
/* Private functions */
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "sram.h"
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
+/*
+ * dpll_core_ck: pointer to the combined dpll_ck + core_ck on OMAP2xxx
+ * (currently defined as "dpll_ck" in the OMAP2xxx clock tree). Set
+ * during dpll_ck init and used later by omap2xxx_clk_get_core_rate().
+ */
+static struct clk *dpll_core_ck;
+
/**
* omap2xxx_clk_get_core_rate - return the CORE_CLK rate
- * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
*
* Returns the CORE_CLK rate. CORE_CLK can have one of three rate
* sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
* struct clk *dpll_ck, which is a composite clock of dpll_ck and
* core_ck.
*/
-unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
+unsigned long omap2xxx_clk_get_core_rate(void)
{
long long core_clk;
u32 v;
- core_clk = omap2_get_dpll_rate(clk);
+ WARN_ON(!dpll_core_ck);
+
+ core_clk = omap2_get_dpll_rate(dpll_core_ck);
v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
v &= OMAP24XX_CORE_CLK_SRC_MASK;
unsigned long omap2_dpllcore_recalc(struct clk *clk)
{
- return omap2xxx_clk_get_core_rate(clk);
+ return omap2xxx_clk_get_core_rate();
}
int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
struct prcm_config tmpset;
const struct dpll_data *dd;
- cur_rate = omap2xxx_clk_get_core_rate(dclk);
+ cur_rate = omap2xxx_clk_get_core_rate();
mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
mult &= OMAP24XX_CORE_CLK_SRC_MASK;
return 0;
}
+/**
+ * omap2xxx_clkt_dpllcore_init - clk init function for dpll_ck
+ * @clk: struct clk *dpll_ck
+ *
+ * Store a local copy of @clk in dpll_core_ck so other code can query
+ * the core rate without having to clk_get(), which can sleep. Must
+ * only be called once. No return value. XXX If the clock
+ * registration process is ever changed such that dpll_ck is no longer
+ * statically defined, this code may need to change to increment some
+ * kind of use count on dpll_ck.
+ */
+void omap2xxx_clkt_dpllcore_init(struct clk *clk)
+{
+ WARN(dpll_core_ck, "dpll_core_ck already set - should never happen");
+ dpll_core_ck = clk;
+}
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock2xxx.h"
#include "prm2xxx_3xxx.h"
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock2xxx.h"
#include "prm2xxx_3xxx.h"
/*
* OMAP2xxx DVFS virtual clock functions
*
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2005-2008, 2012 Texas Instruments, Inc.
* Copyright (C) 2004-2010 Nokia Corporation
*
* Contacts:
#include <linux/cpufreq.h>
#include <linux/slab.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "sram.h"
const struct prcm_config *curr_prcm_set;
const struct prcm_config *rate_table;
+/*
+ * sys_ck_rate: the rate of the external high-frequency clock
+ * oscillator on the board. Set by the SoC-specific clock init code.
+ * Once set during a boot, will not change.
+ */
+static unsigned long sys_ck_rate;
+
/**
* omap2_table_mpu_recalc - just return the MPU speed
* @clk: virt_prcm_set struct clk
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
{
const struct prcm_config *ptr;
- long highest_rate, sys_clk_rate;
+ long highest_rate;
highest_rate = -EINVAL;
- sys_clk_rate = __clk_get_rate(sclk);
for (ptr = rate_table; ptr->mpu_speed; ptr++) {
if (!(ptr->flags & cpu_mask))
continue;
- if (ptr->xtal_speed != sys_clk_rate)
+ if (ptr->xtal_speed != sys_ck_rate)
continue;
highest_rate = ptr->mpu_speed;
const struct prcm_config *prcm;
unsigned long found_speed = 0;
unsigned long flags;
- long sys_clk_rate;
-
- sys_clk_rate = __clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
- if (prcm->xtal_speed != sys_clk_rate)
+ if (prcm->xtal_speed != sys_ck_rate)
continue;
if (prcm->mpu_speed <= rate) {
}
curr_prcm_set = prcm;
- cur_rate = omap2xxx_clk_get_core_rate(dclk);
+ cur_rate = omap2xxx_clk_get_core_rate();
if (prcm->dpll_speed == cur_rate / 2) {
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
return 0;
}
+
+/**
+ * omap2xxx_clkt_vps_check_bootloader_rate - determine which of the rate
+ * table sets matches the current CORE DPLL hardware rate
+ *
+ * Check the MPU rate set by bootloader. Sets the 'curr_prcm_set'
+ * global to point to the active rate set when found; otherwise, sets
+ * it to NULL. No return value;
+ */
+void omap2xxx_clkt_vps_check_bootloader_rates(void)
+{
+ const struct prcm_config *prcm = NULL;
+ unsigned long rate;
+
+ rate = omap2xxx_clk_get_core_rate();
+ for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+ if (!(prcm->flags & cpu_mask))
+ continue;
+ if (prcm->xtal_speed != sys_ck_rate)
+ continue;
+ if (prcm->dpll_speed <= rate)
+ break;
+ }
+ curr_prcm_set = prcm;
+}
+
+/**
+ * omap2xxx_clkt_vps_late_init - store a copy of the sys_ck rate
+ *
+ * Store a copy of the sys_ck rate for later use by the OMAP2xxx DVFS
+ * code. (The sys_ck rate does not -- or rather, must not -- change
+ * during kernel runtime.) Must be called after we have a valid
+ * sys_ck rate, but before the virt_prcm_set clock rate is
+ * recalculated. No return value.
+ */
+void omap2xxx_clkt_vps_late_init(void)
+{
+ struct clk *c;
+
+ c = clk_get(NULL, "sys_ck");
+ if (IS_ERR(c)) {
+ WARN(1, "could not locate sys_ck\n");
+ } else {
+ sys_ck_rate = clk_get_rate(c);
+ clk_put(c);
+ }
+}
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
#include "clock.h"
#include "clock3xxx.h"
#include "clock34xx.h"
#include "sdrc.h"
+#include "sram.h"
#define CYCLES_PER_MHZ 1000000
#include <linux/io.h>
#include <linux/bug.h>
-#include <plat/clock.h>
-
#include "clock.h"
/* Private functions */
#include <asm/div64.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "cm-regbits-24xx.h"
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-#include <plat/prcm.h>
#include "clock.h"
#include "clock2xxx.h"
#undef DEBUG
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <asm/cpu.h>
-#include <plat/clock.h>
-#include <plat/prcm.h>
#include <trace/events/power.h>
#include "soc.h"
#include "clockdomain.h"
#include "clock.h"
-#include "cm2xxx_3xxx.h"
+#include "cm.h"
+#include "cm2xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
+#include "common.h"
+
+/*
+ * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
+ * for a module to indicate that it is no longer in idle
+ */
+#define MAX_MODULE_ENABLE_WAIT 100000
u16 cpu_mask;
*/
static bool clkdm_control = true;
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
+
/*
* OMAP2+ specific clock functions
*/
/* Private functions */
+
+/**
+ * _wait_idlest_generic - wait for a module to leave the idle state
+ * @reg: virtual address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @idlest: idle state indicator (0 or 1) for the clock
+ * @name: name of the clock (for printk)
+ *
+ * Wait for a module to leave idle, where its idle-status register is
+ * not inside the CM module. Returns 1 if the module left idle
+ * promptly, or 0 if the module did not leave idle before the timeout
+ * elapsed. XXX Deprecated - should be moved into drivers for the
+ * individual IP block that the IDLEST register exists in.
+ */
+static int _wait_idlest_generic(void __iomem *reg, u32 mask, u8 idlest,
+ const char *name)
+{
+ int i = 0, ena = 0;
+
+ ena = (idlest) ? 0 : mask;
+
+ omap_test_timeout(((__raw_readl(reg) & mask) == ena),
+ MAX_MODULE_ENABLE_WAIT, i);
+
+ if (i < MAX_MODULE_ENABLE_WAIT)
+ pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
+ name, i);
+ else
+ pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
+ name, MAX_MODULE_ENABLE_WAIT);
+
+ return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+};
+
/**
* _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
* @clk: struct clk * belonging to the module
static void _omap2_module_wait_ready(struct clk *clk)
{
void __iomem *companion_reg, *idlest_reg;
- u8 other_bit, idlest_bit, idlest_val;
+ u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
+ s16 prcm_mod;
+ int r;
/* Not all modules have multiple clocks that their IDLEST depends on */
if (clk->ops->find_companion) {
clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
- omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
- __clk_get_name(clk));
+ r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id);
+ if (r) {
+ /* IDLEST register not in the CM module */
+ _wait_idlest_generic(idlest_reg, (1 << idlest_bit), idlest_val,
+ clk->name);
+ } else {
+ cm_wait_module_ready(prcm_mod, idlest_reg_id, idlest_bit);
+ };
}
/* Public functions */
/* Common data */
-struct clk_functions omap2_clk_functions = {
- .clk_enable = omap2_clk_enable,
- .clk_disable = omap2_clk_disable,
- .clk_round_rate = omap2_clk_round_rate,
- .clk_set_rate = omap2_clk_set_rate,
- .clk_set_parent = omap2_clk_set_parent,
- .clk_disable_unused = omap2_clk_disable_unused,
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ int ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap2_clk_enable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (clk->usecount == 0) {
+ pr_err("Trying disable clock %s with 0 usecount\n",
+ clk->name);
+ WARN_ON(1);
+ goto out;
+ }
+
+ omap2_clk_disable(clk);
+
+out:
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long flags;
+ unsigned long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = clk->rate;
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap2_clk_round_rate(clk, rate);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk))
+ return ret;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap2_clk_set_rate(clk, rate);
+ if (ret == 0)
+ propagate_rate(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
+ return ret;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (clk->usecount == 0) {
+ ret = omap2_clk_set_parent(clk, parent);
+ if (ret == 0)
+ propagate_rate(clk);
+ } else {
+ ret = -EBUSY;
+ }
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+
+int __initdata mpurate;
+
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+ get_option(&str, &mpurate);
+
+ if (!mpurate)
+ return 1;
+
+ if (mpurate < 1000)
+ mpurate *= 1000000;
+
+ return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+ return clk->parent->rate;
+}
+
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+ WARN_ON(!clk->fixed_div);
+
+ return clk->parent->rate / clk->fixed_div;
+}
+
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+ list_del_init(&child->sibling);
+ if (parent)
+ list_add(&child->sibling, &parent->children);
+ child->parent = parent;
+
+ /* now do the debugfs renaming to reattach the child
+ to the proper parent */
+}
+
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &tclk->children, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+static LIST_HEAD(root_clks);
+
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &root_clks, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run. No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+ INIT_LIST_HEAD(&clk->children);
+}
+
+int clk_register(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ /*
+ * trap out already registered clocks
+ */
+ if (clk->node.next || clk->node.prev)
+ return 0;
+
+ mutex_lock(&clocks_mutex);
+ if (clk->parent)
+ list_add(&clk->sibling, &clk->parent->children);
+ else
+ list_add(&clk->sibling, &root_clks);
+
+ list_add(&clk->node, &clocks);
+ if (clk->init)
+ clk->init(clk);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ mutex_lock(&clocks_mutex);
+ list_del(&clk->sibling);
+ list_del(&clk->node);
+ mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+void clk_enable_init_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &clocks, node)
+ if (clkp->flags & ENABLE_ON_INIT)
+ clk_enable(clkp);
+}
+
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name. Assumes that struct clk
+ * names are unique. Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+ struct clk *c;
+ struct clk *ret = NULL;
+
+ mutex_lock(&clocks_mutex);
+
+ list_for_each_entry(c, &clocks, node) {
+ if (!strcmp(c->name, name)) {
+ ret = c;
+ break;
+ }
+ }
+
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
+int omap_clk_enable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->allow_idle)
+ c->ops->allow_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+int omap_clk_disable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->deny_idle)
+ c->ops->deny_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+ return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+ .enable = clkll_enable_null,
+ .disable = clkll_disable_null,
+};
+
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+ .name = "dummy",
+ .ops = &clkops_null,
+};
+
+/*
+ *
+ */
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+ struct clk *ck;
+ unsigned long flags;
+
+ pr_info("clock: disabling unused clocks to save power\n");
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ list_for_each_entry(ck, &clocks, node) {
+ if (ck->ops == &clkops_null)
+ continue;
+
+ if (ck->usecount > 0 || !ck->enable_reg)
+ continue;
+
+ omap2_clk_disable_unused(ck);
+ }
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ * debugfs support to trace clock tree hierarchy and attributes
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static struct dentry *clk_debugfs_root;
+
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+ struct clk *c;
+ struct clk *pa;
+
+ mutex_lock(&clocks_mutex);
+ seq_printf(s, "%-30s %-30s %-10s %s\n",
+ "clock-name", "parent-name", "rate", "use-count");
+
+ list_for_each_entry(c, &clocks, node) {
+ pa = c->parent;
+ seq_printf(s, "%-30s %-30s %-10lu %d\n",
+ c->name, pa ? pa->name : "none", c->rate,
+ c->usecount);
+ }
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+
+static const struct file_operations debug_clock_fops = {
+ .open = clk_dbg_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
};
+static int clk_debugfs_register_one(struct clk *c)
+{
+ int err;
+ struct dentry *d;
+ struct clk *pa = c->parent;
+
+ d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+ if (!d)
+ return -ENOMEM;
+ c->dent = d;
+
+ d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ return 0;
+
+err_out:
+ debugfs_remove_recursive(c->dent);
+ return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->parent;
+
+ if (pa && !pa->dent) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (!c->dent) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (!d)
+ return -ENOMEM;
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clocks, node) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
+
+ d = debugfs_create_file("summary", S_IRUGO,
+ d, NULL, &debug_clock_fops);
+ if (!d)
+ return -ENOMEM;
+
+ return 0;
+err_out:
+ debugfs_remove_recursive(clk_debugfs_root);
+ return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
+
#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
#include <linux/kernel.h>
+#include <linux/list.h>
+
+#include <linux/clkdev.h>
+
+struct omap_clk {
+ u16 cpu;
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) \
+ { \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_242X (1 << 0)
+#define CK_243X (1 << 1) /* 243x, 253x */
+#define CK_3430ES1 (1 << 2) /* 34xxES1 only */
+#define CK_3430ES2PLUS (1 << 3) /* 34xxES2, ES3, non-Sitara 35xx only */
+#define CK_AM35XX (1 << 4) /* Sitara AM35xx */
+#define CK_36XX (1 << 5) /* 36xx/37xx-specific clocks */
+#define CK_443X (1 << 6)
+#define CK_TI816X (1 << 7)
+#define CK_446X (1 << 8)
+#define CK_AM33XX (1 << 9) /* AM33xx specific clocks */
+
+
+#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
+#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX)
+
+struct module;
+struct clk;
+struct clockdomain;
+
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk) (clk->name)
+#define __clk_get_parent(clk) (clk->parent)
+#define __clk_get_rate(clk) (clk->rate)
+
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware. Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+ void (*find_idlest)(struct clk *, void __iomem **,
+ u8 *, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **,
+ u8 *);
+ void (*allow_idle)(struct clk *);
+ void (*deny_idle)(struct clk *);
+};
+
+/* struct clksel_rate.flags possibilities */
+#define RATE_IN_242X (1 << 0)
+#define RATE_IN_243X (1 << 1)
+#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */
+#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */
+#define RATE_IN_36XX (1 << 4)
+#define RATE_IN_4430 (1 << 5)
+#define RATE_IN_TI816X (1 << 6)
+#define RATE_IN_4460 (1 << 7)
+#define RATE_IN_AM33XX (1 << 8)
+#define RATE_IN_TI814X (1 << 9)
+
+#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
+#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
+#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX)
+#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460)
+
+/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
+#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
+
+
+/**
+ * struct clksel_rate - register bitfield values corresponding to clk divisors
+ * @val: register bitfield value (shifted to bit 0)
+ * @div: clock divisor corresponding to @val
+ * @flags: (see "struct clksel_rate.flags possibilities" above)
+ *
+ * @val should match the value of a read from struct clk.clksel_reg
+ * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
+ *
+ * @div is the divisor that should be applied to the parent clock's rate
+ * to produce the current clock's rate.
+ */
+struct clksel_rate {
+ u32 val;
+ u8 div;
+ u16 flags;
+};
+
+/**
+ * struct clksel - available parent clocks, and a pointer to their divisors
+ * @parent: struct clk * to a possible parent clock
+ * @rates: available divisors for this parent clock
+ *
+ * A struct clksel is always associated with one or more struct clks
+ * and one or more struct clksel_rates.
+ */
+struct clksel {
+ struct clk *parent;
+ const struct clksel_rate *rates;
+};
+
+/**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ *
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a different structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
+struct dpll_data {
+ void __iomem *mult_div1_reg;
+ u32 mult_mask;
+ u32 div1_mask;
+ struct clk *clk_bypass;
+ struct clk *clk_ref;
+ void __iomem *control_reg;
+ u32 enable_mask;
+ unsigned long last_rounded_rate;
+ u16 last_rounded_m;
+ u16 max_multiplier;
+ u8 last_rounded_n;
+ u8 min_divider;
+ u16 max_divider;
+ u8 modes;
+ void __iomem *autoidle_reg;
+ void __iomem *idlest_reg;
+ u32 autoidle_mask;
+ u32 freqsel_mask;
+ u32 idlest_mask;
+ u32 dco_mask;
+ u32 sddiv_mask;
+ u8 auto_recal_bit;
+ u8 recal_en_bit;
+ u8 recal_st_bit;
+ u8 flags;
+};
+
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ * bits share the same register. This flag allows the
+ * omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ * should be used. This is a temporary solution - a better approach
+ * would be to associate clock type-specific data with the clock,
+ * similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL (1 << 1)
+#define CLOCK_NO_IDLE_PARENT (1 << 2)
+#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
+#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2 (1 << 5)
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named. It should be "enable_count" or
+ * something similar. "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals. (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+ struct list_head node;
+ const struct clkops *ops;
+ const char *name;
+ struct clk *parent;
+ struct list_head children;
+ struct list_head sibling; /* node for children */
+ unsigned long rate;
+ void __iomem *enable_reg;
+ unsigned long (*recalc)(struct clk *);
+ int (*set_rate)(struct clk *, unsigned long);
+ long (*round_rate)(struct clk *, unsigned long);
+ void (*init)(struct clk *);
+ u8 enable_bit;
+ s8 usecount;
+ u8 fixed_div;
+ u8 flags;
+ void __iomem *clksel_reg;
+ u32 clksel_mask;
+ const struct clksel *clksel;
+ struct dpll_data *dpll_data;
+ const char *clkdm_name;
+ struct clockdomain *clkdm;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+#endif
+};
+
+struct clk_functions {
+ int (*clk_enable)(struct clk *clk);
+ void (*clk_disable)(struct clk *clk);
+ long (*clk_round_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_parent)(struct clk *clk, struct clk *parent);
+ void (*clk_allow_idle)(struct clk *clk);
+ void (*clk_deny_idle)(struct clk *clk);
+ void (*clk_disable_unused)(struct clk *clk);
+};
+
+extern int mpurate;
+
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+
+extern const struct clkops clkops_null;
+
+extern struct clk dummy_ck;
-#include <plat/clock.h>
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
#define CORE_CLK_SRC_32K 0x0
u32 omap2_get_dpll_rate(struct clk *clk);
void omap2_init_dpll_parent(struct clk *clk);
-int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
-
-
-#ifdef CONFIG_ARCH_OMAP2
-void omap2xxx_clk_prepare_for_reboot(void);
-#else
-static inline void omap2xxx_clk_prepare_for_reboot(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-void omap3_clk_prepare_for_reboot(void);
-#else
-static inline void omap3_clk_prepare_for_reboot(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-void omap4_clk_prepare_for_reboot(void);
-#else
-static inline void omap4_clk_prepare_for_reboot(void)
-{
-}
-#endif
-
int omap2_dflt_clk_enable(struct clk *clk);
void omap2_dflt_clk_disable(struct clk *clk);
void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-extern struct clk *vclk, *sclk;
extern const struct clksel_rate gpt_32k_rates[];
extern const struct clksel_rate gpt_sys_rates[];
/*
* OMAP2420 clock data
*
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc.
* Copyright (C) 2004-2011 Nokia Corporation
*
* Contacts:
#include <linux/clk.h>
#include <linux/list.h>
-#include <plat/clkdev_omap.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
.name = "dpll_ck",
.ops = &clkops_omap2xxx_dpll_ops,
.parent = &sys_ck, /* Can be func_32k also */
+ .init = &omap2xxx_clkt_dpllcore_init,
.dpll_data = &dpll_dd,
.clkdm_name = "wkup_clkdm",
.recalc = &omap2_dpllcore_recalc,
int __init omap2420_clk_init(void)
{
- const struct prcm_config *prcm;
struct omap_clk *c;
- u32 clkrate;
prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
- cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
cpu_mask = RATE_IN_242X;
rate_table = omap2420_rate_table;
- clk_init(&omap2_clk_functions);
-
for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
c++)
clk_preinit(c->lk.clk);
omap2_init_clk_clkdm(c->lk.clk);
}
+ omap2xxx_clkt_vps_late_init();
+
/* Disable autoidle on all clocks; let the PM code enable it later */
omap_clk_disable_autoidle_all();
- /* Check the MPU rate set by bootloader */
- clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sys_ck.rate)
- continue;
- if (prcm->dpll_speed <= clkrate)
- break;
- }
- curr_prcm_set = prcm;
+ /* XXX Can this be done from the virt_prcm_set clk init function? */
+ omap2xxx_clkt_vps_check_bootloader_rates();
recalculate_root_clocks();
*/
clk_enable_init_clocks();
- /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
- vclk = clk_get(NULL, "virt_prcm_set");
- sclk = clk_get(NULL, "sys_ck");
- dclk = clk_get(NULL, "dpll_ck");
-
return 0;
}
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
/**
/*
* OMAP2430 clock data
*
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc.
* Copyright (C) 2004-2011 Nokia Corporation
*
* Contacts:
#include <linux/clk.h>
#include <linux/list.h>
-#include <plat/clkdev_omap.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
.name = "dpll_ck",
.ops = &clkops_omap2xxx_dpll_ops,
.parent = &sys_ck, /* Can be func_32k also */
+ .init = &omap2xxx_clkt_dpllcore_init,
.dpll_data = &dpll_dd,
.clkdm_name = "wkup_clkdm",
.recalc = &omap2_dpllcore_recalc,
int __init omap2430_clk_init(void)
{
- const struct prcm_config *prcm;
struct omap_clk *c;
- u32 clkrate;
prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
- cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
cpu_mask = RATE_IN_243X;
rate_table = omap2430_rate_table;
- clk_init(&omap2_clk_functions);
-
for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks);
c++)
clk_preinit(c->lk.clk);
omap2_init_clk_clkdm(c->lk.clk);
}
+ omap2xxx_clkt_vps_late_init();
+
/* Disable autoidle on all clocks; let the PM code enable it later */
omap_clk_disable_autoidle_all();
- /* Check the MPU rate set by bootloader */
- clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sys_ck.rate)
- continue;
- if (prcm->dpll_speed <= clkrate)
- break;
- }
- curr_prcm_set = prcm;
+ /* XXX Can this be done from the virt_prcm_set clk init function? */
+ omap2xxx_clkt_vps_check_bootloader_rates();
recalculate_root_clocks();
*/
clk_enable_init_clocks();
- /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
- vclk = clk_get(NULL, "virt_prcm_set");
- sclk = clk_get(NULL, "sys_ck");
- dclk = clk_get(NULL, "dpll_ck");
-
return 0;
}
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "cm.h"
#include "cm-regbits-24xx.h"
-struct clk *vclk, *sclk, *dclk;
-
/*
* Omap24xx specific clock functions
*/
-/*
- * Set clocks for bypass mode for reboot to work.
- */
-void omap2xxx_clk_prepare_for_reboot(void)
-{
- u32 rate;
-
- if (vclk == NULL || sclk == NULL)
- return;
-
- rate = clk_get_rate(sclk);
- clk_set_rate(vclk, rate);
-}
-
/*
* Switch the MPU rate if specified on cmdline. We cannot do this
* early until cmdline is parsed. XXX This should be removed from the
unsigned long omap2_osc_clk_recalc(struct clk *clk);
unsigned long omap2_dpllcore_recalc(struct clk *clk);
int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
-unsigned long omap2xxx_clk_get_core_rate(struct clk *clk);
+unsigned long omap2xxx_clk_get_core_rate(void);
u32 omap2xxx_get_apll_clkin(void);
u32 omap2xxx_get_sysclkdiv(void);
void omap2xxx_clk_prepare_for_reboot(void);
+void omap2xxx_clkt_dpllcore_init(struct clk *clk);
+void omap2xxx_clkt_vps_check_bootloader_rates(void);
+void omap2xxx_clkt_vps_late_init(void);
#ifdef CONFIG_SOC_OMAP2420
int omap2420_clk_init(void);
#define omap2430_clk_init() do { } while(0)
#endif
-extern void __iomem *prcm_clksrc_ctrl, *cm_idlest_pll;
-
-extern struct clk *dclk;
+extern void __iomem *prcm_clksrc_ctrl;
extern const struct clkops clkops_omap2430_i2chs_wait;
extern const struct clkops clkops_oscck;
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/clk.h>
-#include <plat/clkdev_omap.h>
-#include "am33xx.h"
+#include "soc.h"
#include "iomap.h"
#include "control.h"
#include "clock.h"
cpu_clkflg = CK_AM33XX;
}
- clk_init(&omap2_clk_functions);
-
for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++)
clk_preinit(c->lk.clk);
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock34xx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
/**
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock3517.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
/*
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock36xx.h"
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "clock3xxx.h"
#include <linux/list.h>
#include <linux/io.h>
-#include <plat/clkdev_omap.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock34xx.h"
#include "clock36xx.h"
#include "clock3517.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
else
dpll4_dd = dpll4_dd_34xx;
- clk_init(&omap2_clk_functions);
-
for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
c++)
clk_preinit(c->lk.clk);
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clkdev_omap.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
return 0;
}
- clk_init(&omap2_clk_functions);
-
/*
* Must stay commented until all OMAP SoC drivers are
* converted to runtime PM, or drivers may start crashing
#include <linux/bitops.h>
-#include <plat/clock.h>
+#include "soc.h"
+#include "clock.h"
#include "clockdomain.h"
/* clkdm_list contains all registered struct clockdomains */
#include <linux/spinlock.h>
#include "powerdomain.h"
-#include <plat/clock.h>
-#include <plat/omap_hwmod.h>
-#include <plat/cpu.h>
+#include "clock.h"
+#include "omap_hwmod.h"
/*
* Clockdomain flags
+++ /dev/null
-/*
- * OMAP2 and OMAP3 clockdomain control
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Derived from mach-omap2/clockdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <plat/prcm.h>
-#include "prm.h"
-#include "prm2xxx_3xxx.h"
-#include "cm.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
-#include "prm-regbits-24xx.h"
-#include "clockdomain.h"
-
-static int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
- return 0;
-}
-
-static int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
- return 0;
-}
-
-static int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
- PM_WKDEP, (1 << clkdm2->dep_bit));
-}
-
-static int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
-{
- struct clkdm_dep *cd;
- u32 mask = 0;
-
- for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!cd->clkdm)
- continue; /* only happens if data is erroneous */
-
- /* PRM accesses are slow, so minimize them */
- mask |= 1 << cd->clkdm->dep_bit;
- atomic_set(&cd->wkdep_usecount, 0);
- }
-
- omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
- PM_WKDEP);
- return 0;
-}
-
-static int omap3_clkdm_add_sleepdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->pwrdm.ptr->prcm_offs,
- OMAP3430_CM_SLEEPDEP);
- return 0;
-}
-
-static int omap3_clkdm_del_sleepdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->pwrdm.ptr->prcm_offs,
- OMAP3430_CM_SLEEPDEP);
- return 0;
-}
-
-static int omap3_clkdm_read_sleepdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
- OMAP3430_CM_SLEEPDEP, (1 << clkdm2->dep_bit));
-}
-
-static int omap3_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
-{
- struct clkdm_dep *cd;
- u32 mask = 0;
-
- for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!cd->clkdm)
- continue; /* only happens if data is erroneous */
-
- /* PRM accesses are slow, so minimize them */
- mask |= 1 << cd->clkdm->dep_bit;
- atomic_set(&cd->sleepdep_usecount, 0);
- }
- omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
- OMAP3430_CM_SLEEPDEP);
- return 0;
-}
-
-static int omap2_clkdm_sleep(struct clockdomain *clkdm)
-{
- omap2_cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
- clkdm->pwrdm.ptr->prcm_offs,
- OMAP2_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap2_clkdm_wakeup(struct clockdomain *clkdm)
-{
- omap2_cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
- clkdm->pwrdm.ptr->prcm_offs,
- OMAP2_PM_PWSTCTRL);
- return 0;
-}
-
-static void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
-{
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_add_autodeps(clkdm);
-
- omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
-{
- omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_del_autodeps(clkdm);
-}
-
-static void _enable_hwsup(struct clockdomain *clkdm)
-{
- if (cpu_is_omap24xx())
- omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- else if (cpu_is_omap34xx())
- omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static void _disable_hwsup(struct clockdomain *clkdm)
-{
- if (cpu_is_omap24xx())
- omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- else if (cpu_is_omap34xx())
- omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static int omap3_clkdm_sleep(struct clockdomain *clkdm)
-{
- omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- return 0;
-}
-
-static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
-{
- omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- return 0;
-}
-
-static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (hwsup) {
- /* Disable HW transitions when we are changing deps */
- _disable_hwsup(clkdm);
- _clkdm_add_autodeps(clkdm);
- _enable_hwsup(clkdm);
- } else {
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- omap2_clkdm_wakeup(clkdm);
- }
-
- return 0;
-}
-
-static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (hwsup) {
- /* Disable HW transitions when we are changing deps */
- _disable_hwsup(clkdm);
- _clkdm_del_autodeps(clkdm);
- _enable_hwsup(clkdm);
- } else {
- if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
- omap2_clkdm_sleep(clkdm);
- }
-
- return 0;
-}
-
-static void omap3_clkdm_allow_idle(struct clockdomain *clkdm)
-{
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_add_autodeps(clkdm);
-
- omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static void omap3_clkdm_deny_idle(struct clockdomain *clkdm)
-{
- omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_del_autodeps(clkdm);
-}
-
-static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- /*
- * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
- * more details on the unpleasant problem this is working
- * around
- */
- if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
- (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
- omap3_clkdm_wakeup(clkdm);
- return 0;
- }
-
- hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (hwsup) {
- /* Disable HW transitions when we are changing deps */
- _disable_hwsup(clkdm);
- _clkdm_add_autodeps(clkdm);
- _enable_hwsup(clkdm);
- } else {
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- omap3_clkdm_wakeup(clkdm);
- }
-
- return 0;
-}
-
-static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- /*
- * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
- * more details on the unpleasant problem this is working
- * around
- */
- if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
- !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
- _enable_hwsup(clkdm);
- return 0;
- }
-
- hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (hwsup) {
- /* Disable HW transitions when we are changing deps */
- _disable_hwsup(clkdm);
- _clkdm_del_autodeps(clkdm);
- _enable_hwsup(clkdm);
- } else {
- if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
- omap3_clkdm_sleep(clkdm);
- }
-
- return 0;
-}
-
-struct clkdm_ops omap2_clkdm_operations = {
- .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
- .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
- .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
- .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
- .clkdm_sleep = omap2_clkdm_sleep,
- .clkdm_wakeup = omap2_clkdm_wakeup,
- .clkdm_allow_idle = omap2_clkdm_allow_idle,
- .clkdm_deny_idle = omap2_clkdm_deny_idle,
- .clkdm_clk_enable = omap2_clkdm_clk_enable,
- .clkdm_clk_disable = omap2_clkdm_clk_disable,
-};
-
-struct clkdm_ops omap3_clkdm_operations = {
- .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
- .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
- .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
- .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
- .clkdm_add_sleepdep = omap3_clkdm_add_sleepdep,
- .clkdm_del_sleepdep = omap3_clkdm_del_sleepdep,
- .clkdm_read_sleepdep = omap3_clkdm_read_sleepdep,
- .clkdm_clear_all_sleepdeps = omap3_clkdm_clear_all_sleepdeps,
- .clkdm_sleep = omap3_clkdm_sleep,
- .clkdm_wakeup = omap3_clkdm_wakeup,
- .clkdm_allow_idle = omap3_clkdm_allow_idle,
- .clkdm_deny_idle = omap3_clkdm_deny_idle,
- .clkdm_clk_enable = omap3xxx_clkdm_clk_enable,
- .clkdm_clk_disable = omap3xxx_clkdm_clk_disable,
-};
+++ /dev/null
-/*
- * AM33XX clockdomain control
- *
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
- * Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-
-#include "clockdomain.h"
-#include "cm33xx.h"
-
-
-static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
-{
- am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
- return 0;
-}
-
-static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
-{
- am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
- return 0;
-}
-
-static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
-{
- am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
-{
- am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
-{
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- return am33xx_clkdm_wakeup(clkdm);
-
- return 0;
-}
-
-static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-
- if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
- am33xx_clkdm_sleep(clkdm);
-
- return 0;
-}
-
-struct clkdm_ops am33xx_clkdm_operations = {
- .clkdm_sleep = am33xx_clkdm_sleep,
- .clkdm_wakeup = am33xx_clkdm_wakeup,
- .clkdm_allow_idle = am33xx_clkdm_allow_idle,
- .clkdm_deny_idle = am33xx_clkdm_deny_idle,
- .clkdm_clk_enable = am33xx_clkdm_clk_enable,
- .clkdm_clk_disable = am33xx_clkdm_clk_disable,
-};
+++ /dev/null
-/*
- * OMAP4 clockdomain control
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Derived from mach-omap2/clockdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include "clockdomain.h"
-#include "cminst44xx.h"
-#include "cm44xx.h"
-
-static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->prcm_partition,
- clkdm1->cm_inst, clkdm1->clkdm_offs +
- OMAP4_CM_STATICDEP);
- return 0;
-}
-
-static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->prcm_partition,
- clkdm1->cm_inst, clkdm1->clkdm_offs +
- OMAP4_CM_STATICDEP);
- return 0;
-}
-
-static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition,
- clkdm1->cm_inst, clkdm1->clkdm_offs +
- OMAP4_CM_STATICDEP,
- (1 << clkdm2->dep_bit));
-}
-
-static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
-{
- struct clkdm_dep *cd;
- u32 mask = 0;
-
- if (!clkdm->prcm_partition)
- return 0;
-
- for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!cd->clkdm)
- continue; /* only happens if data is erroneous */
-
- mask |= 1 << cd->clkdm->dep_bit;
- atomic_set(&cd->wkdep_usecount, 0);
- }
-
- omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs +
- OMAP4_CM_STATICDEP);
- return 0;
-}
-
-static int omap4_clkdm_sleep(struct clockdomain *clkdm)
-{
- omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
- return 0;
-}
-
-static int omap4_clkdm_wakeup(struct clockdomain *clkdm)
-{
- omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
- return 0;
-}
-
-static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
-{
- omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
-{
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- omap4_clkdm_wakeup(clkdm);
- else
- omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst,
- clkdm->clkdm_offs);
-}
-
-static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
-{
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- return omap4_clkdm_wakeup(clkdm);
-
- return 0;
-}
-
-static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->prcm_partition)
- return 0;
-
- /*
- * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
- * more details on the unpleasant problem this is working
- * around
- */
- if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
- !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
- omap4_clkdm_allow_idle(clkdm);
- return 0;
- }
-
- hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
-
- if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
- omap4_clkdm_sleep(clkdm);
-
- return 0;
-}
-
-struct clkdm_ops omap4_clkdm_operations = {
- .clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep,
- .clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep,
- .clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep,
- .clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
- .clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep,
- .clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep,
- .clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep,
- .clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
- .clkdm_sleep = omap4_clkdm_sleep,
- .clkdm_wakeup = omap4_clkdm_wakeup,
- .clkdm_allow_idle = omap4_clkdm_allow_idle,
- .clkdm_deny_idle = omap4_clkdm_deny_idle,
- .clkdm_clk_enable = omap4_clkdm_clk_enable,
- .clkdm_clk_disable = omap4_clkdm_clk_disable,
-};
#include <linux/kernel.h>
#include <linux/io.h>
+#include "soc.h"
#include "clockdomain.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include <linux/kernel.h>
#include <linux/io.h>
+#include "soc.h"
#include "clockdomain.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include <linux/kernel.h>
#include <linux/io.h>
+#include "soc.h"
#include "clockdomain.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#define OMAP24XX_EN_DPLL_MASK (0x3 << 0)
/* CM_IDLEST_CKGEN */
+#define OMAP24XX_ST_54M_APLL_SHIFT 9
#define OMAP24XX_ST_54M_APLL_MASK (1 << 9)
+#define OMAP24XX_ST_96M_APLL_SHIFT 8
#define OMAP24XX_ST_96M_APLL_MASK (1 << 8)
#define OMAP24XX_ST_54M_CLK_MASK (1 << 6)
#define OMAP24XX_ST_12M_CLK_MASK (1 << 5)
/*
* OMAP2+ Clock Management prototypes
*
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
*/
#define MAX_MODULE_READY_TIME 2000
+# ifndef __ASSEMBLER__
+extern void __iomem *cm_base;
+extern void __iomem *cm2_base;
+extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2);
+# endif
+
/*
* MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
* the PRCM to request that a module enter the inactive state in the
*/
#define MAX_MODULE_DISABLE_TIME 5000
+# ifndef __ASSEMBLER__
+
+/**
+ * struct cm_ll_data - fn ptrs to per-SoC CM function implementations
+ * @split_idlest_reg: ptr to the SoC CM-specific split_idlest_reg impl
+ * @wait_module_ready: ptr to the SoC CM-specific wait_module_ready impl
+ */
+struct cm_ll_data {
+ int (*split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id);
+ int (*wait_module_ready)(s16 prcm_mod, u8 idlest_id, u8 idlest_shift);
+};
+
+extern int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id);
+extern int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift);
+
+extern int cm_register(struct cm_ll_data *cld);
+extern int cm_unregister(struct cm_ll_data *cld);
+
+# endif
+
#endif
--- /dev/null
+/*
+ * OMAP2xxx CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include "soc.h"
+#include "iomap.h"
+#include "common.h"
+#include "prm2xxx.h"
+#include "cm.h"
+#include "cm2xxx.h"
+#include "cm-regbits-24xx.h"
+#include "clockdomain.h"
+
+/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
+#define DPLL_AUTOIDLE_DISABLE 0x0
+#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3
+
+/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
+#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0
+#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
+
+/* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */
+#define EN_APLL_LOCKED 3
+
+static const u8 omap2xxx_cm_idlest_offs[] = {
+ CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
+};
+
+/*
+ *
+ */
+
+static void _write_clktrctrl(u8 c, s16 module, u32 mask)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
+ v &= ~mask;
+ v |= c << __ffs(mask);
+ omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
+}
+
+bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
+}
+
+void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
+{
+ _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
+}
+
+void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
+{
+ _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
+}
+
+/*
+ * DPLL autoidle control
+ */
+
+static void _omap2xxx_set_dpll_autoidle(u8 m)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+ v &= ~OMAP24XX_AUTO_DPLL_MASK;
+ v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
+ omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
+}
+
+void omap2xxx_cm_set_dpll_disable_autoidle(void)
+{
+ _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
+}
+
+void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
+{
+ _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
+}
+
+/*
+ * APLL control
+ */
+
+static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+ v &= ~mask;
+ v |= m << __ffs(mask);
+ omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
+}
+
+void omap2xxx_cm_set_apll54_disable_autoidle(void)
+{
+ _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
+ OMAP24XX_AUTO_54M_MASK);
+}
+
+void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
+{
+ _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
+ OMAP24XX_AUTO_54M_MASK);
+}
+
+void omap2xxx_cm_set_apll96_disable_autoidle(void)
+{
+ _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
+ OMAP24XX_AUTO_96M_MASK);
+}
+
+void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
+{
+ _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
+ OMAP24XX_AUTO_96M_MASK);
+}
+
+/* Enable an APLL if off */
+static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit)
+{
+ u32 v, m;
+
+ m = EN_APLL_LOCKED << enable_bit;
+
+ v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+ if (v & m)
+ return 0; /* apll already enabled */
+
+ v |= m;
+ omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
+
+ omap2xxx_cm_wait_module_ready(PLL_MOD, 1, status_bit);
+
+ /*
+ * REVISIT: Should we return an error code if
+ * omap2xxx_cm_wait_module_ready() fails?
+ */
+ return 0;
+}
+
+/* Stop APLL */
+static void _omap2xxx_apll_disable(u8 enable_bit)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+ v &= ~(EN_APLL_LOCKED << enable_bit);
+ omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
+}
+
+/* Enable an APLL if off */
+int omap2xxx_cm_apll54_enable(void)
+{
+ return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT,
+ OMAP24XX_ST_54M_APLL_SHIFT);
+}
+
+/* Enable an APLL if off */
+int omap2xxx_cm_apll96_enable(void)
+{
+ return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT,
+ OMAP24XX_ST_96M_APLL_SHIFT);
+}
+
+/* Stop APLL */
+void omap2xxx_cm_apll54_disable(void)
+{
+ _omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT);
+}
+
+/* Stop APLL */
+void omap2xxx_cm_apll96_disable(void)
+{
+ _omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT);
+}
+
+/**
+ * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
+ * @idlest_reg: CM_IDLEST* virtual address
+ * @prcm_inst: pointer to an s16 to return the PRCM instance offset
+ * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
+ *
+ * XXX This function is only needed until absolute register addresses are
+ * removed from the OMAP struct clk records.
+ */
+int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id)
+{
+ unsigned long offs;
+ u8 idlest_offs;
+ int i;
+
+ if (idlest_reg < cm_base || idlest_reg > (cm_base + 0x0fff))
+ return -EINVAL;
+
+ idlest_offs = (unsigned long)idlest_reg & 0xff;
+ for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) {
+ if (idlest_offs == omap2xxx_cm_idlest_offs[i]) {
+ *idlest_reg_id = i + 1;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs))
+ return -EINVAL;
+
+ offs = idlest_reg - cm_base;
+ offs &= 0xff00;
+ *prcm_inst = offs;
+
+ return 0;
+}
+
+/*
+ *
+ */
+
+/**
+ * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
+ * success or -EBUSY if the module doesn't enable in time.
+ */
+int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+{
+ int ena = 0, i = 0;
+ u8 cm_idlest_reg;
+ u32 mask;
+
+ if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs)))
+ return -EINVAL;
+
+ cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1];
+
+ mask = 1 << idlest_shift;
+ ena = mask;
+
+ omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
+ mask) == ena), MAX_MODULE_READY_TIME, i);
+
+ return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/* Clockdomain low-level functions */
+
+static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_add_autodeps(clkdm);
+
+ omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+}
+
+static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_del_autodeps(clkdm);
+}
+
+static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ _clkdm_add_autodeps(clkdm);
+ omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap2xxx_clkdm_wakeup(clkdm);
+ }
+
+ return 0;
+}
+
+static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ _clkdm_del_autodeps(clkdm);
+ omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+ omap2xxx_clkdm_sleep(clkdm);
+ }
+
+ return 0;
+}
+
+struct clkdm_ops omap2_clkdm_operations = {
+ .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
+ .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
+ .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
+ .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
+ .clkdm_sleep = omap2xxx_clkdm_sleep,
+ .clkdm_wakeup = omap2xxx_clkdm_wakeup,
+ .clkdm_allow_idle = omap2xxx_clkdm_allow_idle,
+ .clkdm_deny_idle = omap2xxx_clkdm_deny_idle,
+ .clkdm_clk_enable = omap2xxx_clkdm_clk_enable,
+ .clkdm_clk_disable = omap2xxx_clkdm_clk_disable,
+};
+
+/*
+ *
+ */
+
+static struct cm_ll_data omap2xxx_cm_ll_data = {
+ .split_idlest_reg = &omap2xxx_cm_split_idlest_reg,
+ .wait_module_ready = &omap2xxx_cm_wait_module_ready,
+};
+
+int __init omap2xxx_cm_init(void)
+{
+ if (!cpu_is_omap24xx())
+ return 0;
+
+ return cm_register(&omap2xxx_cm_ll_data);
+}
+
+static void __exit omap2xxx_cm_exit(void)
+{
+ if (!cpu_is_omap24xx())
+ return;
+
+ /* Should never happen */
+ WARN(cm_unregister(&omap2xxx_cm_ll_data),
+ "%s: cm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap2xxx_cm_exit);
--- /dev/null
+/*
+ * OMAP2xxx Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The CM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The CM modules/instances on OMAP4 are quite different, so
+ * they are handled in a separate file.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_H
+#define __ARCH_ASM_MACH_OMAP2_CM2XXX_H
+
+#include "prcm-common.h"
+#include "cm2xxx_3xxx.h"
+
+#define OMAP2420_CM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+#define OMAP2430_CM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+
+/*
+ * Module specific CM register offsets from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* OMAP2-specific register offsets */
+
+#define OMAP24XX_CM_FCLKEN2 0x0004
+#define OMAP24XX_CM_ICLKEN4 0x001c
+#define OMAP24XX_CM_AUTOIDLE4 0x003c
+#define OMAP24XX_CM_IDLEST4 0x002c
+
+/* CM_IDLEST bit field values to indicate deasserted IdleReq */
+
+#define OMAP24XX_CM_IDLEST_VAL 0
+
+
+/* Clock management domain register get/set */
+
+#ifndef __ASSEMBLER__
+
+extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
+extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+
+extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
+extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
+
+extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
+extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
+extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
+extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
+
+extern bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
+extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+ u8 idlest_shift);
+extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
+ s16 *prcm_inst, u8 *idlest_reg_id);
+
+extern int __init omap2xxx_cm_init(void);
+
+#endif
+
+#endif
#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
#define __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
-#include "prcm-common.h"
-
-#define OMAP2420_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
-#define OMAP2430_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
-#define OMAP34XX_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-
-
-/*
- * OMAP3-specific global CM registers
- * Use cm_{read,write}_reg() with these registers.
- * These registers appear once per CM module.
- */
-
-#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
-
-#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
-#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+#include "cm.h"
/*
* Module specific CM register offsets from CM_BASE + domain offset
#define CM_IDLEST 0x0020
#define CM_IDLEST1 CM_IDLEST
#define CM_IDLEST2 0x0024
+#define OMAP2430_CM_IDLEST3 0x0028
#define CM_AUTOIDLE 0x0030
#define CM_AUTOIDLE1 CM_AUTOIDLE
#define CM_AUTOIDLE2 0x0034
#define CM_CLKSEL2 0x0044
#define OMAP2_CM_CLKSTCTRL 0x0048
-/* OMAP2-specific register offsets */
-
-#define OMAP24XX_CM_FCLKEN2 0x0004
-#define OMAP24XX_CM_ICLKEN4 0x001c
-#define OMAP24XX_CM_AUTOIDLE4 0x003c
-#define OMAP24XX_CM_IDLEST4 0x002c
-
-#define OMAP2430_CM_IDLEST3 0x0028
-
-/* OMAP3-specific register offsets */
-
-#define OMAP3430_CM_CLKEN_PLL 0x0004
-#define OMAP3430ES2_CM_CLKEN2 0x0004
-#define OMAP3430ES2_CM_FCLKEN3 0x0008
-#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
-#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
-#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
-#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
-#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
-#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
-#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
-#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL
-#define OMAP3430_CM_CLKSTST 0x004c
-#define OMAP3430ES2_CM_CLKSEL4 0x004c
-#define OMAP3430ES2_CM_CLKSEL5 0x0050
-#define OMAP3430_CM_CLKSEL2_EMU 0x0050
-#define OMAP3430_CM_CLKSEL3_EMU 0x0054
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
-/* CM_IDLEST bit field values to indicate deasserted IdleReq */
+static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
+{
+ return __raw_readl(cm_base + module + idx);
+}
-#define OMAP24XX_CM_IDLEST_VAL 0
-#define OMAP34XX_CM_IDLEST_VAL 1
+static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+ __raw_writel(val, cm_base + module + idx);
+}
+/* Read-modify-write a register in a CM module. Caller must lock */
+static inline u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module,
+ s16 idx)
+{
+ u32 v;
-/* Clock management domain register get/set */
+ v = omap2_cm_read_mod_reg(module, idx);
+ v &= ~mask;
+ v |= bits;
+ omap2_cm_write_mod_reg(v, module, idx);
-#ifndef __ASSEMBLER__
+ return v;
+}
-extern u32 omap2_cm_read_mod_reg(s16 module, u16 idx);
-extern void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+/* Read a CM register, AND it, and shift the result down to bit 0 */
+static inline u32 omap2_cm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+ u32 v;
-extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
- u8 idlest_shift);
-extern u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
+ v = omap2_cm_read_mod_reg(domain, idx);
+ v &= mask;
+ v >>= __ffs(mask);
-extern bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+ return v;
+}
-extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
+static inline u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
-extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
-extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
+static inline u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
-extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
-extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
+extern int omap2xxx_cm_apll54_enable(void);
+extern void omap2xxx_cm_apll54_disable(void);
+extern int omap2xxx_cm_apll96_enable(void);
+extern void omap2xxx_cm_apll96_disable(void);
#endif
/* CM_IDLEST_GFX */
#define OMAP_ST_GFX_MASK (1 << 0)
-
-/* Function prototypes */
-# ifndef __ASSEMBLER__
-extern void omap3_cm_save_context(void);
-extern void omap3_cm_restore_context(void);
-# endif
-
#endif
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
-
+#include "clockdomain.h"
#include "cm.h"
#include "cm33xx.h"
#include "cm-regbits-34xx.h"
v &= ~AM33XX_MODULEMODE_MASK;
am33xx_cm_write_reg(v, inst, clkctrl_offs);
}
+
+/*
+ * Clockdomain low-level functions
+ */
+
+static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ return am33xx_clkdm_wakeup(clkdm);
+
+ return 0;
+}
+
+static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+
+ if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+ am33xx_clkdm_sleep(clkdm);
+
+ return 0;
+}
+
+struct clkdm_ops am33xx_clkdm_operations = {
+ .clkdm_sleep = am33xx_clkdm_sleep,
+ .clkdm_wakeup = am33xx_clkdm_wakeup,
+ .clkdm_allow_idle = am33xx_clkdm_allow_idle,
+ .clkdm_deny_idle = am33xx_clkdm_deny_idle,
+ .clkdm_clk_enable = am33xx_clkdm_clk_enable,
+ .clkdm_clk_disable = am33xx_clkdm_clk_disable,
+};
/*
- * OMAP2/3 CM module functions
+ * OMAP3xxx CM module functions
*
* Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
* Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include "soc.h"
#include "iomap.h"
#include "common.h"
+#include "prm2xxx_3xxx.h"
#include "cm.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
+#include "clockdomain.h"
-/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
-#define DPLL_AUTOIDLE_DISABLE 0x0
-#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3
-
-/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
-#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0
-#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
-
-static const u8 cm_idlest_offs[] = {
- CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
+static const u8 omap3xxx_cm_idlest_offs[] = {
+ CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
};
-u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
-{
- return __raw_readl(cm_base + module + idx);
-}
-
-void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
- __raw_writel(val, cm_base + module + idx);
-}
-
-/* Read-modify-write a register in a CM module. Caller must lock */
-u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
- u32 v;
-
- v = omap2_cm_read_mod_reg(module, idx);
- v &= ~mask;
- v |= bits;
- omap2_cm_write_mod_reg(v, module, idx);
-
- return v;
-}
-
-u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
/*
*
*/
omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
}
-bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
{
u32 v;
- bool ret = 0;
-
- BUG_ON(!cpu_is_omap24xx() && !cpu_is_omap34xx());
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
v &= mask;
v >>= __ffs(mask);
- if (cpu_is_omap24xx())
- ret = (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
- else
- ret = (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
-
- return ret;
-}
-
-void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
-{
- _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
-}
-
-void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
-{
- _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
+ return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
}
void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
}
/*
- * DPLL autoidle control
+ *
*/
-static void _omap2xxx_set_dpll_autoidle(u8 m)
+/**
+ * omap3xxx_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
+ * success or -EBUSY if the module doesn't enable in time.
+ */
+int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
{
- u32 v;
+ int ena = 0, i = 0;
+ u8 cm_idlest_reg;
+ u32 mask;
- v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
- v &= ~OMAP24XX_AUTO_DPLL_MASK;
- v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
- omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
-}
+ if (!idlest_id || (idlest_id > ARRAY_SIZE(omap3xxx_cm_idlest_offs)))
+ return -EINVAL;
-void omap2xxx_cm_set_dpll_disable_autoidle(void)
-{
- _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
+ cm_idlest_reg = omap3xxx_cm_idlest_offs[idlest_id - 1];
+
+ mask = 1 << idlest_shift;
+ ena = 0;
+
+ omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
+ mask) == ena), MAX_MODULE_READY_TIME, i);
+
+ return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}
-void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
+/**
+ * omap3xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
+ * @idlest_reg: CM_IDLEST* virtual address
+ * @prcm_inst: pointer to an s16 to return the PRCM instance offset
+ * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
+ *
+ * XXX This function is only needed until absolute register addresses are
+ * removed from the OMAP struct clk records.
+ */
+int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id)
{
- _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
+ unsigned long offs;
+ u8 idlest_offs;
+ int i;
+
+ if (idlest_reg < (cm_base + OMAP3430_IVA2_MOD) ||
+ idlest_reg > (cm_base + 0x1ffff))
+ return -EINVAL;
+
+ idlest_offs = (unsigned long)idlest_reg & 0xff;
+ for (i = 0; i < ARRAY_SIZE(omap3xxx_cm_idlest_offs); i++) {
+ if (idlest_offs == omap3xxx_cm_idlest_offs[i]) {
+ *idlest_reg_id = i + 1;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(omap3xxx_cm_idlest_offs))
+ return -EINVAL;
+
+ offs = idlest_reg - cm_base;
+ offs &= 0xff00;
+ *prcm_inst = offs;
+
+ return 0;
}
-/*
- * APLL autoidle control
- */
+/* Clockdomain low-level operations */
-static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
+static int omap3xxx_clkdm_add_sleepdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
{
- u32 v;
+ omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP);
+ return 0;
+}
- v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
- v &= ~mask;
- v |= m << __ffs(mask);
- omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
+static int omap3xxx_clkdm_del_sleepdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP);
+ return 0;
}
-void omap2xxx_cm_set_apll54_disable_autoidle(void)
+static int omap3xxx_clkdm_read_sleepdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
{
- _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
- OMAP24XX_AUTO_54M_MASK);
+ return omap2_cm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP,
+ (1 << clkdm2->dep_bit));
}
-void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
+static int omap3xxx_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
{
- _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
- OMAP24XX_AUTO_54M_MASK);
+ struct clkdm_dep *cd;
+ u32 mask = 0;
+
+ for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
+ if (!cd->clkdm)
+ continue; /* only happens if data is erroneous */
+
+ mask |= 1 << cd->clkdm->dep_bit;
+ atomic_set(&cd->sleepdep_usecount, 0);
+ }
+ omap2_cm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP);
+ return 0;
}
-void omap2xxx_cm_set_apll96_disable_autoidle(void)
+static int omap3xxx_clkdm_sleep(struct clockdomain *clkdm)
{
- _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
- OMAP24XX_AUTO_96M_MASK);
+ omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ return 0;
}
-void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
+static int omap3xxx_clkdm_wakeup(struct clockdomain *clkdm)
{
- _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
- OMAP24XX_AUTO_96M_MASK);
+ omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ return 0;
}
-/*
- *
- */
+static void omap3xxx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_add_autodeps(clkdm);
-/**
- * omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
- * @prcm_mod: PRCM module offset
- * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
- * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
- *
- * XXX document
- */
-int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+ omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+}
+
+static void omap3xxx_clkdm_deny_idle(struct clockdomain *clkdm)
{
- int ena = 0, i = 0;
- u8 cm_idlest_reg;
- u32 mask;
+ omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
- if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
- return -EINVAL;
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_del_autodeps(clkdm);
+}
- cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
+static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
- mask = 1 << idlest_shift;
+ if (!clkdm->clktrctrl_mask)
+ return 0;
- if (cpu_is_omap24xx())
- ena = mask;
- else if (cpu_is_omap34xx())
- ena = 0;
- else
- BUG();
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
+ (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
+ omap3xxx_clkdm_wakeup(clkdm);
+ return 0;
+ }
+
+ hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ _clkdm_add_autodeps(clkdm);
+ omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap3xxx_clkdm_wakeup(clkdm);
+ }
+
+ return 0;
+}
- omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
- MAX_MODULE_READY_TIME, i);
+static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
- return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+ !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+ omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ return 0;
+ }
+
+ hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ _clkdm_del_autodeps(clkdm);
+ omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+ omap3xxx_clkdm_sleep(clkdm);
+ }
+
+ return 0;
}
+struct clkdm_ops omap3_clkdm_operations = {
+ .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
+ .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
+ .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
+ .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
+ .clkdm_add_sleepdep = omap3xxx_clkdm_add_sleepdep,
+ .clkdm_del_sleepdep = omap3xxx_clkdm_del_sleepdep,
+ .clkdm_read_sleepdep = omap3xxx_clkdm_read_sleepdep,
+ .clkdm_clear_all_sleepdeps = omap3xxx_clkdm_clear_all_sleepdeps,
+ .clkdm_sleep = omap3xxx_clkdm_sleep,
+ .clkdm_wakeup = omap3xxx_clkdm_wakeup,
+ .clkdm_allow_idle = omap3xxx_clkdm_allow_idle,
+ .clkdm_deny_idle = omap3xxx_clkdm_deny_idle,
+ .clkdm_clk_enable = omap3xxx_clkdm_clk_enable,
+ .clkdm_clk_disable = omap3xxx_clkdm_clk_disable,
+};
+
/*
* Context save/restore code - OMAP3 only
*/
-#ifdef CONFIG_ARCH_OMAP3
struct omap3_cm_regs {
u32 iva2_cm_clksel1;
u32 iva2_cm_clksel2;
omap2_cm_write_mod_reg(cm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD,
OMAP3_CM_CLKOUT_CTRL_OFFSET);
}
-#endif
+
+/*
+ *
+ */
+
+static struct cm_ll_data omap3xxx_cm_ll_data = {
+ .split_idlest_reg = &omap3xxx_cm_split_idlest_reg,
+ .wait_module_ready = &omap3xxx_cm_wait_module_ready,
+};
+
+int __init omap3xxx_cm_init(void)
+{
+ if (!cpu_is_omap34xx())
+ return 0;
+
+ return cm_register(&omap3xxx_cm_ll_data);
+}
+
+static void __exit omap3xxx_cm_exit(void)
+{
+ if (!cpu_is_omap34xx())
+ return;
+
+ /* Should never happen */
+ WARN(cm_unregister(&omap3xxx_cm_ll_data),
+ "%s: cm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap3xxx_cm_exit);
--- /dev/null
+/*
+ * OMAP2/3 Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The CM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The CM modules/instances on OMAP4 are quite different, so
+ * they are handled in a separate file.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_CM3XXX_H
+#define __ARCH_ASM_MACH_OMAP2_CM3XXX_H
+
+#include "prcm-common.h"
+#include "cm2xxx_3xxx.h"
+
+#define OMAP34XX_CM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+
+
+/*
+ * OMAP3-specific global CM registers
+ * Use cm_{read,write}_reg() with these registers.
+ * These registers appear once per CM module.
+ */
+
+#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
+
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific CM register offsets from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* OMAP3-specific register offsets */
+
+#define OMAP3430_CM_CLKEN_PLL 0x0004
+#define OMAP3430ES2_CM_CLKEN2 0x0004
+#define OMAP3430ES2_CM_FCLKEN3 0x0008
+#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
+#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
+#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
+#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
+#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
+#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
+#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
+#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL
+#define OMAP3430_CM_CLKSTST 0x004c
+#define OMAP3430ES2_CM_CLKSEL4 0x004c
+#define OMAP3430ES2_CM_CLKSEL5 0x0050
+#define OMAP3430_CM_CLKSEL2_EMU 0x0050
+#define OMAP3430_CM_CLKSEL3_EMU 0x0054
+
+
+/* CM_IDLEST bit field values to indicate deasserted IdleReq */
+
+#define OMAP34XX_CM_IDLEST_VAL 1
+
+
+#ifndef __ASSEMBLER__
+
+extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
+
+extern bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
+extern int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+ u8 idlest_shift);
+
+extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
+ s16 *prcm_inst, u8 *idlest_reg_id);
+
+extern void omap3_cm_save_context(void);
+extern void omap3_cm_restore_context(void);
+
+extern int __init omap3xxx_cm_init(void);
+
+#endif
+
+#endif
--- /dev/null
+/*
+ * OMAP2+ common Clock Management (CM) IP block functions
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX This code should eventually be moved to a CM driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+
+#include "cm2xxx.h"
+#include "cm3xxx.h"
+#include "cm44xx.h"
+#include "common.h"
+
+/*
+ * cm_ll_data: function pointers to SoC-specific implementations of
+ * common CM functions
+ */
+static struct cm_ll_data null_cm_ll_data;
+static struct cm_ll_data *cm_ll_data = &null_cm_ll_data;
+
+/* cm_base: base virtual address of the CM IP block */
+void __iomem *cm_base;
+
+/* cm2_base: base virtual address of the CM2 IP block (OMAP44xx only) */
+void __iomem *cm2_base;
+
+/**
+ * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
+ * @cm: CM base virtual address
+ * @cm2: CM2 base virtual address (if present on the booted SoC)
+ *
+ * XXX Will be replaced when the PRM/CM drivers are completed.
+ */
+void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2)
+{
+ cm_base = cm;
+ cm2_base = cm2;
+}
+
+/**
+ * cm_split_idlest_reg - split CM_IDLEST reg addr into its components
+ * @idlest_reg: CM_IDLEST* virtual address
+ * @prcm_inst: pointer to an s16 to return the PRCM instance offset
+ * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
+ *
+ * Given an absolute CM_IDLEST register address @idlest_reg, passes
+ * the PRCM instance offset and IDLEST register ID back to the caller
+ * via the @prcm_inst and @idlest_reg_id. Returns -EINVAL upon error,
+ * or 0 upon success. XXX This function is only needed until absolute
+ * register addresses are removed from the OMAP struct clk records.
+ */
+int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id)
+{
+ if (!cm_ll_data->split_idlest_reg) {
+ WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst,
+ idlest_reg_id);
+}
+
+/**
+ * cm_wait_module_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
+ * success, -EBUSY if the module doesn't enable in time, or -EINVAL if
+ * no per-SoC wait_module_ready() function pointer has been registered
+ * or if the idlest register is unknown on the SoC.
+ */
+int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+{
+ if (!cm_ll_data->wait_module_ready) {
+ WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return cm_ll_data->wait_module_ready(prcm_mod, idlest_id, idlest_shift);
+}
+
+/**
+ * cm_register - register per-SoC low-level data with the CM
+ * @cld: low-level per-SoC OMAP CM data & function pointers to register
+ *
+ * Register per-SoC low-level OMAP CM data and function pointers with
+ * the OMAP CM common interface. The caller must keep the data
+ * pointed to by @cld valid until it calls cm_unregister() and
+ * it returns successfully. Returns 0 upon success, -EINVAL if @cld
+ * is NULL, or -EEXIST if cm_register() has already been called
+ * without an intervening cm_unregister().
+ */
+int cm_register(struct cm_ll_data *cld)
+{
+ if (!cld)
+ return -EINVAL;
+
+ if (cm_ll_data != &null_cm_ll_data)
+ return -EEXIST;
+
+ cm_ll_data = cld;
+
+ return 0;
+}
+
+/**
+ * cm_unregister - unregister per-SoC low-level data & function pointers
+ * @cld: low-level per-SoC OMAP CM data & function pointers to unregister
+ *
+ * Unregister per-SoC low-level OMAP CM data and function pointers
+ * that were previously registered with cm_register(). The
+ * caller may not destroy any of the data pointed to by @cld until
+ * this function returns successfully. Returns 0 upon success, or
+ * -EINVAL if @cld is NULL or if @cld does not match the struct
+ * cm_ll_data * previously registered by cm_register().
+ */
+int cm_unregister(struct cm_ll_data *cld)
+{
+ if (!cld || cm_ll_data != cld)
+ return -EINVAL;
+
+ cm_ll_data = &null_cm_ll_data;
+
+ return 0;
+}
* OMAP4 CM instance functions
*
* Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
* Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include "iomap.h"
#include "common.h"
+#include "clockdomain.h"
#include "cm.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
v &= ~OMAP4430_MODULEMODE_MASK;
omap4_cminst_write_inst_reg(v, part, inst, clkctrl_offs);
}
+
+/*
+ * Clockdomain low-level functions
+ */
+
+static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->prcm_partition,
+ clkdm1->cm_inst, clkdm1->clkdm_offs +
+ OMAP4_CM_STATICDEP);
+ return 0;
+}
+
+static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->prcm_partition,
+ clkdm1->cm_inst, clkdm1->clkdm_offs +
+ OMAP4_CM_STATICDEP);
+ return 0;
+}
+
+static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition,
+ clkdm1->cm_inst,
+ clkdm1->clkdm_offs +
+ OMAP4_CM_STATICDEP,
+ (1 << clkdm2->dep_bit));
+}
+
+static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
+{
+ struct clkdm_dep *cd;
+ u32 mask = 0;
+
+ if (!clkdm->prcm_partition)
+ return 0;
+
+ for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
+ if (!cd->clkdm)
+ continue; /* only happens if data is erroneous */
+
+ mask |= 1 << cd->clkdm->dep_bit;
+ atomic_set(&cd->wkdep_usecount, 0);
+ }
+
+ omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs +
+ OMAP4_CM_STATICDEP);
+ return 0;
+}
+
+static int omap4_clkdm_sleep(struct clockdomain *clkdm)
+{
+ omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static int omap4_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap4_clkdm_wakeup(clkdm);
+ else
+ omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
+ clkdm->cm_inst,
+ clkdm->clkdm_offs);
+}
+
+static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ return omap4_clkdm_wakeup(clkdm);
+
+ return 0;
+}
+
+static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->prcm_partition)
+ return 0;
+
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+ !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+ omap4_clkdm_allow_idle(clkdm);
+ return 0;
+ }
+
+ hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs);
+
+ if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+ omap4_clkdm_sleep(clkdm);
+
+ return 0;
+}
+
+struct clkdm_ops omap4_clkdm_operations = {
+ .clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep,
+ .clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep,
+ .clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep,
+ .clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
+ .clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep,
+ .clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep,
+ .clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep,
+ .clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
+ .clkdm_sleep = omap4_clkdm_sleep,
+ .clkdm_wakeup = omap4_clkdm_wakeup,
+ .clkdm_allow_idle = omap4_clkdm_allow_idle,
+ .clkdm_deny_idle = omap4_clkdm_deny_idle,
+ .clkdm_clk_enable = omap4_clkdm_clk_enable,
+ .clkdm_clk_disable = omap4_clkdm_clk_disable,
+};
extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
u32 mask);
+extern void omap_cm_base_init(void);
+
#endif
#include <linux/spi/ads7846.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
#include "common.h"
#include "common-board-devices.h"
{
}
#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
- int nr_parts)
-{
- u8 cs = 0;
- u8 nandcs = GPMC_CS_NUM + 1;
-
- /* find out the chip-select on which NAND exists */
- while (cs < GPMC_CS_NUM) {
- u32 ret = 0;
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- if ((ret & 0xC00) == 0x800) {
- printk(KERN_INFO "Found NAND on CS%d\n", cs);
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- }
- cs++;
- }
-
- if (nandcs > GPMC_CS_NUM) {
- pr_info("NAND: Unable to find configuration in GPMC\n");
- return;
- }
-
- if (nandcs < GPMC_CS_NUM) {
- nand_data.cs = nandcs;
- nand_data.parts = parts;
- nand_data.nr_parts = nr_parts;
- nand_data.devsize = options;
-
- printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (gpmc_nand_init(&nand_data) < 0)
- printk(KERN_ERR "Unable to register NAND device\n");
- }
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
- int nr_parts)
-{
-}
-#endif
void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
struct ads7846_platform_data *board_pdata);
-void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
#endif /* __OMAP_COMMON_BOARD_DEVICES__ */
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
+#include <linux/platform_data/dsp-omap.h>
-#include <plat/clock.h>
+#include <plat/vram.h>
-#include "soc.h"
-#include "iomap.h"
#include "common.h"
-#include "sdrc.h"
-#include "control.h"
-
-/* Global address base setup code */
-
-static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
-{
- omap2_set_globals_tap(omap2_globals);
- omap2_set_globals_sdrc(omap2_globals);
- omap2_set_globals_control(omap2_globals);
- omap2_set_globals_prcm(omap2_globals);
-}
-
-#if defined(CONFIG_SOC_OMAP2420)
-
-static struct omap_globals omap242x_globals = {
- .class = OMAP242X_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(0x48014000),
- .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
- .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
-};
-
-void __init omap2_set_globals_242x(void)
-{
- __omap2_set_globals(&omap242x_globals);
-}
-
-void __init omap242x_map_io(void)
-{
- omap242x_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_SOC_OMAP2430)
-
-static struct omap_globals omap243x_globals = {
- .class = OMAP243X_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(0x4900a000),
- .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
- .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
-};
-
-void __init omap2_set_globals_243x(void)
-{
- __omap2_set_globals(&omap243x_globals);
-}
-
-void __init omap243x_map_io(void)
-{
- omap243x_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-
-static struct omap_globals omap3_globals = {
- .class = OMAP343X_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(0x4830A000),
- .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
- .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
-};
-
-void __init omap2_set_globals_3xxx(void)
-{
- __omap2_set_globals(&omap3_globals);
-}
-
-void __init omap3_map_io(void)
-{
- omap34xx_map_common_io();
-}
+#include "omap-secure.h"
/*
- * Adjust TAP register base such that omap3_check_revision accesses the correct
- * TI81XX register for checking device ID (it adds 0x204 to tap base while
- * TI81XX DEVICE ID register is at offset 0x600 from control base).
+ * Stub function for OMAP2 so that common files
+ * continue to build when custom builds are used
*/
-#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \
- TI81XX_CONTROL_DEVICE_ID - 0x204)
-
-static struct omap_globals ti81xx_globals = {
- .class = OMAP343X_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
-};
-
-void __init omap2_set_globals_ti81xx(void)
-{
- __omap2_set_globals(&ti81xx_globals);
-}
-
-void __init ti81xx_map_io(void)
-{
- omapti81xx_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_SOC_AM33XX)
-#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \
- TI81XX_CONTROL_DEVICE_ID - 0x204)
-
-static struct omap_globals am33xx_globals = {
- .class = AM335X_CLASS,
- .tap = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE),
- .ctrl = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
- .prm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
- .cm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
-};
-
-void __init omap2_set_globals_am33xx(void)
-{
- __omap2_set_globals(&am33xx_globals);
-}
-
-void __init am33xx_map_io(void)
-{
- omapam33xx_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4)
-static struct omap_globals omap4_globals = {
- .class = OMAP443X_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
- .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
- .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
- .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE),
-};
-
-void __init omap2_set_globals_443x(void)
-{
- __omap2_set_globals(&omap4_globals);
-}
-
-void __init omap4_map_io(void)
-{
- omap44xx_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_SOC_OMAP5)
-static struct omap_globals omap5_globals = {
- .class = OMAP54XX_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
- .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
- .cm2 = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE),
- .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE),
-};
-
-void __init omap2_set_globals_5xxx(void)
+int __weak omap_secure_ram_reserve_memblock(void)
{
- omap2_set_globals_tap(&omap5_globals);
- omap2_set_globals_control(&omap5_globals);
- omap2_set_globals_prcm(&omap5_globals);
+ return 0;
}
-void __init omap5_map_io(void)
+void __init omap_reserve(void)
{
- omap5_map_common_io();
+ omap_vram_reserve_sdram_memblock();
+ omap_dsp_reserve_sdram_memblock();
+ omap_secure_ram_reserve_memblock();
+ omap_barrier_reserve_memblock();
}
-#endif
#include <linux/irq.h>
#include <linux/delay.h>
+#include <linux/i2c.h>
#include <linux/i2c/twl.h>
+#include <linux/i2c-omap.h>
#include <asm/proc-fns.h>
-#include <plat/cpu.h>
-#include <plat/serial.h>
-#include <plat/common.h>
+#include "i2c.h"
+#include "serial.h"
-#define OMAP_INTC_START NR_IRQS
-
-#ifdef CONFIG_SOC_OMAP2420
-extern void omap242x_map_common_io(void);
-#else
-static inline void omap242x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-extern void omap243x_map_common_io(void);
-#else
-static inline void omap243x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-extern void omap34xx_map_common_io(void);
-#else
-static inline void omap34xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_TI81XX
-extern void omapti81xx_map_common_io(void);
-#else
-static inline void omapti81xx_map_common_io(void)
-{
-}
-#endif
+#include "usb.h"
-#ifdef CONFIG_SOC_AM33XX
-extern void omapam33xx_map_common_io(void);
-#else
-static inline void omapam33xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-extern void omap44xx_map_common_io(void);
-#else
-static inline void omap44xx_map_common_io(void)
-{
-}
-#endif
+#define OMAP_INTC_START NR_IRQS
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP2)
int omap2_pm_init(void);
}
#endif
-#ifdef CONFIG_SOC_OMAP5
-extern void omap5_map_common_io(void);
-#else
-static inline void omap5_map_common_io(void)
-{
-}
-#endif
-
extern void omap2_init_common_infrastructure(void);
extern struct sys_timer omap2_timer;
void ti81xx_init_late(void);
void omap4430_init_late(void);
int omap2_common_pm_late_init(void);
-void omap_prcm_restart(char, const char *);
-/*
- * IO bases for various OMAP processors
- * Except the tap base, rest all the io bases
- * listed are physical addresses.
- */
-struct omap_globals {
- u32 class; /* OMAP class to detect */
- void __iomem *tap; /* Control module ID code */
- void __iomem *sdrc; /* SDRAM Controller */
- void __iomem *sms; /* SDRAM Memory Scheduler */
- void __iomem *ctrl; /* System Control Module */
- void __iomem *ctrl_pad; /* PAD Control Module */
- void __iomem *prm; /* Power and Reset Management */
- void __iomem *cm; /* Clock Management */
- void __iomem *cm2;
- void __iomem *prcm_mpu;
-};
-
-void omap2_set_globals_242x(void);
-void omap2_set_globals_243x(void);
-void omap2_set_globals_3xxx(void);
-void omap2_set_globals_443x(void);
-void omap2_set_globals_5xxx(void);
-void omap2_set_globals_ti81xx(void);
-void omap2_set_globals_am33xx(void);
-
-/* These get called from omap2_set_globals_xxxx(), do not call these */
-void omap2_set_globals_tap(struct omap_globals *);
-#if defined(CONFIG_SOC_HAS_OMAP2_SDRC)
-void omap2_set_globals_sdrc(struct omap_globals *);
+#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
+void omap2xxx_restart(char mode, const char *cmd);
+#else
+static inline void omap2xxx_restart(char mode, const char *cmd)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+void omap3xxx_restart(char mode, const char *cmd);
+#else
+static inline void omap3xxx_restart(char mode, const char *cmd)
+{
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+void omap44xx_restart(char mode, const char *cmd);
#else
-static inline void omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
-{ }
+static inline void omap44xx_restart(char mode, const char *cmd)
+{
+}
#endif
-void omap2_set_globals_control(struct omap_globals *);
-void omap2_set_globals_prcm(struct omap_globals *);
-
-void omap242x_map_io(void);
-void omap243x_map_io(void);
-void omap3_map_io(void);
-void am33xx_map_io(void);
-void omap4_map_io(void);
-void omap5_map_io(void);
-void ti81xx_map_io(void);
+
+/* This gets called from mach-omap2/io.c, do not call this */
+void __init omap2_set_globals_tap(u32 class, void __iomem *tap);
+
+void __init omap242x_map_io(void);
+void __init omap243x_map_io(void);
+void __init omap3_map_io(void);
+void __init am33xx_map_io(void);
+void __init omap4_map_io(void);
+void __init omap5_map_io(void);
+void __init ti81xx_map_io(void);
+
+/* omap_barriers_init() is OMAP4 only */
void omap_barriers_init(void);
/**
struct omap_sdrc_params *sdrc_cs1);
struct omap2_hsmmc_info;
extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
+extern void omap_reserve(void);
+
+struct omap_hwmod;
+extern int omap_dss_reset(struct omap_hwmod *);
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
/*
* OMAP2/3 System Control Module register access
*
- * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007, 2012 Texas Instruments, Inc.
* Copyright (C) 2007 Nokia Corporation
*
* Written by Paul Walmsley
#include <linux/kernel.h>
#include <linux/io.h>
-#include <plat/sdrc.h>
-
#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "prm3xxx.h"
+#include "cm3xxx.h"
#include "sdrc.h"
#include "pm.h"
#include "control.h"
#define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg))
#define OMAP4_CTRL_PAD_REGADDR(reg) (omap4_ctrl_pad_base + (reg))
-void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
+void __init omap2_set_globals_control(void __iomem *ctrl,
+ void __iomem *ctrl_pad)
{
- if (omap2_globals->ctrl)
- omap2_ctrl_base = omap2_globals->ctrl;
-
- if (omap2_globals->ctrl_pad)
- omap4_ctrl_pad_base = omap2_globals->ctrl_pad;
+ omap2_ctrl_base = ctrl;
+ omap4_ctrl_pad_base = ctrl_pad;
}
void __iomem *omap_ctrl_base_get(void)
extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
extern void omap3630_ctrl_disable_rta(void);
extern int omap3_ctrl_save_padconf(void);
+extern void omap2_set_globals_control(void __iomem *ctrl,
+ void __iomem *ctrl_pad);
#else
#define omap_ctrl_base_get() 0
#define omap_ctrl_readb(x) 0
#include <linux/export.h>
#include <linux/cpu_pm.h>
-#include <plat/prcm.h>
#include "powerdomain.h"
#include "clockdomain.h"
#include <asm/mach-types.h>
#include <asm/mach/map.h>
+#include <plat-omap/dma-omap.h>
+
#include "iomap.h"
-#include <plat/dma.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
#include "omap4-keypad.h"
#include "soc.h"
#include "mux.h"
#include "control.h"
#include "devices.h"
+#include "dma.h"
#define L3_MODULES_MAX_LEN 12
#define L3_MODULES 3
return 0;
}
arch_initcall(omap2_init_devices);
-
-#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-static int __init omap_init_wdt(void)
-{
- int id = -1;
- struct platform_device *pdev;
- struct omap_hwmod *oh;
- char *oh_name = "wd_timer2";
- char *dev_name = "omap_wdt";
-
- if (!cpu_class_is_omap2() || of_have_populated_dt())
- return 0;
-
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up wd_timer%d hwmod\n", id);
- return -EINVAL;
- }
-
- pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0);
- WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
- dev_name, oh->name);
- return 0;
-}
-subsys_initcall(omap_init_wdt);
-#endif
#include <linux/delay.h>
#include <video/omapdss.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "omap-pm.h"
#include "common.h"
+#include "soc.h"
#include "iomap.h"
#include "mux.h"
#include "control.h"
#include "display.h"
+#include "prm.h"
#define DISPC_CONTROL 0x0040
#define DISPC_CONTROL2 0x0238
return ERR_PTR(r);
}
+static enum omapdss_version __init omap_display_get_version(void)
+{
+ if (cpu_is_omap24xx())
+ return OMAPDSS_VER_OMAP24xx;
+ else if (cpu_is_omap3630())
+ return OMAPDSS_VER_OMAP3630;
+ else if (cpu_is_omap34xx()) {
+ if (soc_is_am35xx()) {
+ return OMAPDSS_VER_AM35xx;
+ } else {
+ if (omap_rev() < OMAP3430_REV_ES3_0)
+ return OMAPDSS_VER_OMAP34xx_ES1;
+ else
+ return OMAPDSS_VER_OMAP34xx_ES3;
+ }
+ } else if (omap_rev() == OMAP4430_REV_ES1_0)
+ return OMAPDSS_VER_OMAP4430_ES1;
+ else if (omap_rev() == OMAP4430_REV_ES2_0 ||
+ omap_rev() == OMAP4430_REV_ES2_1 ||
+ omap_rev() == OMAP4430_REV_ES2_2)
+ return OMAPDSS_VER_OMAP4430_ES2;
+ else if (cpu_is_omap44xx())
+ return OMAPDSS_VER_OMAP4;
+ else if (soc_is_omap54xx())
+ return OMAPDSS_VER_OMAP5;
+ else
+ return OMAPDSS_VER_UNKNOWN;
+}
+
int __init omap_display_init(struct omap_dss_board_info *board_data)
{
int r = 0;
int i, oh_count;
const struct omap_dss_hwmod_data *curr_dss_hwmod;
struct platform_device *dss_pdev;
+ enum omapdss_version ver;
/* create omapdss device */
+ ver = omap_display_get_version();
+
+ if (ver == OMAPDSS_VER_UNKNOWN) {
+ pr_err("DSS not supported on this SoC\n");
+ return -ENODEV;
+ }
+
+ board_data->version = ver;
board_data->dsi_enable_pads = omap_dsi_enable_pads;
board_data->dsi_disable_pads = omap_dsi_disable_pads;
board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count;
}
}
-#define MAX_MODULE_SOFTRESET_WAIT 10000
int omap_dss_reset(struct omap_hwmod *oh)
{
struct omap_hwmod_opt_clk *oc;
#include <linux/init.h>
#include <linux/device.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+
+#include "soc.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
#define OMAP2_DMA_STRIDE 0x60
return -ENOMEM;
}
+ if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+ d->dev_caps |= HS_CHANNELS_RESERVED;
+
/* Check the capabilities register for descriptor loading feature */
if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS)
dma_common_ch_end = CCDN;
--- /dev/null
+/*
+ * OMAP2PLUS DMA channel definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __OMAP2PLUS_DMA_CHANNEL_H
+#define __OMAP2PLUS_DMA_CHANNEL_H
+
+
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE 0
+#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
+#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
+#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */
+#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */
+#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
+
+#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */
+#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */
+
+/* Only for AM35xx */
+#define AM35XX_DMA_UART4_TX 54
+#define AM35XX_DMA_UART4_RX 55
+
+#endif /* __OMAP2PLUS_DMA_CHANNEL_H */
#include <linux/bitops.h>
#include <linux/clkdev.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "cm2xxx_3xxx.h"
#include <linux/io.h>
#include <linux/bitops.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "clock44xx.h"
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <plat/omap_device.h>
-#include <plat/omap_hwmod.h>
+#include "omap_device.h"
+#include "omap_hwmod.h"
#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#ifdef CONFIG_BRIDGE_DVFS
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
#endif
#include <linux/platform_data/dsp-omap.h>
#include <linux/of.h>
#include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "omap-pm.h"
#include "powerdomain.h"
#include <asm/mach/flash.h>
-#include <plat/gpmc.h>
-
+#include "gpmc.h"
#include "soc.h"
+#include "gpmc-nand.h"
+
+/* minimum size for IO mapping */
+#define NAND_IO_SIZE 4
static struct resource gpmc_nand_resource[] = {
{
.resource = gpmc_nand_resource,
};
-static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
+static int omap2_nand_gpmc_retime(
+ struct omap_nand_platform_data *gpmc_nand_data,
+ struct gpmc_timings *gpmc_t)
{
struct gpmc_timings t;
int err;
- if (!gpmc_nand_data->gpmc_t)
- return 0;
-
memset(&t, 0, sizeof(t));
- t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk;
- t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
- t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on);
+ t.sync_clk = gpmc_t->sync_clk;
+ t.cs_on = gpmc_round_ns_to_ticks(gpmc_t->cs_on);
+ t.adv_on = gpmc_round_ns_to_ticks(gpmc_t->adv_on);
/* Read */
- t.adv_rd_off = gpmc_round_ns_to_ticks(
- gpmc_nand_data->gpmc_t->adv_rd_off);
+ t.adv_rd_off = gpmc_round_ns_to_ticks(gpmc_t->adv_rd_off);
t.oe_on = t.adv_on;
- t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access);
- t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off);
- t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off);
- t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle);
+ t.access = gpmc_round_ns_to_ticks(gpmc_t->access);
+ t.oe_off = gpmc_round_ns_to_ticks(gpmc_t->oe_off);
+ t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_t->cs_rd_off);
+ t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_t->rd_cycle);
/* Write */
- t.adv_wr_off = gpmc_round_ns_to_ticks(
- gpmc_nand_data->gpmc_t->adv_wr_off);
+ t.adv_wr_off = gpmc_round_ns_to_ticks(gpmc_t->adv_wr_off);
t.we_on = t.oe_on;
if (cpu_is_omap34xx()) {
- t.wr_data_mux_bus = gpmc_round_ns_to_ticks(
- gpmc_nand_data->gpmc_t->wr_data_mux_bus);
- t.wr_access = gpmc_round_ns_to_ticks(
- gpmc_nand_data->gpmc_t->wr_access);
+ t.wr_data_mux_bus = gpmc_round_ns_to_ticks(gpmc_t->wr_data_mux_bus);
+ t.wr_access = gpmc_round_ns_to_ticks(gpmc_t->wr_access);
}
- t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off);
- t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off);
- t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
+ t.we_off = gpmc_round_ns_to_ticks(gpmc_t->we_off);
+ t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_t->cs_wr_off);
+ t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_t->wr_cycle);
/* Configure GPMC */
if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
return 0;
}
-int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
+static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
+{
+ /* support only OMAP3 class */
+ if (!cpu_is_omap34xx()) {
+ pr_err("BCH ecc is not supported on this CPU\n");
+ return 0;
+ }
+
+ /*
+ * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
+ * Other chips may be added if confirmed to work.
+ */
+ if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) &&
+ (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
+ pr_err("BCH 4-bit mode is not supported on this CPU\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
+ struct gpmc_timings *gpmc_t)
{
int err = 0;
struct device *dev = &gpmc_nand_device.dev;
gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
gpmc_nand_resource[2].start =
gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
- /* Set timings in GPMC */
- err = omap2_nand_gpmc_retime(gpmc_nand_data);
- if (err < 0) {
- dev_err(dev, "Unable to set gpmc timings: %d\n", err);
- return err;
+
+ if (gpmc_t) {
+ err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t);
+ if (err < 0) {
+ dev_err(dev, "Unable to set gpmc timings: %d\n", err);
+ return err;
+ }
}
/* Enable RD PIN Monitoring Reg */
gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
+ if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt))
+ return -EINVAL;
+
err = platform_device_register(&gpmc_nand_device);
if (err < 0) {
dev_err(dev, "Unable to register NAND device\n");
--- /dev/null
+/*
+ * arch/arm/mach-omap2/gpmc-nand.h
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __OMAP2_GPMC_NAND_H
+#define __OMAP2_GPMC_NAND_H
+
+#include "gpmc.h"
+#include <linux/platform_data/mtd-nand-omap2.h>
+
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d,
+ struct gpmc_timings *gpmc_t);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
+ struct gpmc_timings *gpmc_t)
+{
+ return 0;
+}
+#endif
+
+#endif
#include <linux/mtd/onenand_regs.h>
#include <linux/io.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/err.h>
#include <asm/mach/flash.h>
-#include <plat/gpmc.h>
-
+#include "gpmc.h"
#include "soc.h"
+#include "gpmc-onenand.h"
#define ONENAND_IO_SIZE SZ_128K
+#define ONENAND_FLAG_SYNCREAD (1 << 0)
+#define ONENAND_FLAG_SYNCWRITE (1 << 1)
+#define ONENAND_FLAG_HF (1 << 2)
+#define ONENAND_FLAG_VHF (1 << 3)
+
+static unsigned onenand_flags;
+static unsigned latency;
+static int fclk_offset;
+
static struct omap_onenand_platform_data *gpmc_onenand_data;
static struct resource gpmc_onenand_resource = {
.resource = &gpmc_onenand_resource,
};
-static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+static struct gpmc_timings omap2_onenand_calc_async_timings(void)
{
struct gpmc_timings t;
- u32 reg;
- int err;
const int t_cer = 15;
const int t_avdp = 12;
const int t_wpl = 40;
const int t_wph = 30;
- /* Ensure sync read and sync write are disabled */
- reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
- reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
- writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
-
memset(&t, 0, sizeof(t));
t.sync_clk = 0;
t.cs_on = 0;
t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+ return t;
+}
+
+static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
+{
/* Configure GPMC for asynchronous read */
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
GPMC_CONFIG1_DEVICESIZE_16 |
GPMC_CONFIG1_MUXADDDATA);
- err = gpmc_cs_set_timings(cs, &t);
- if (err)
- return err;
+ return gpmc_cs_set_timings(cs, t);
+}
+
+static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
+{
+ u32 reg;
/* Ensure sync read and sync write are disabled */
reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
-
- return 0;
}
-static void set_onenand_cfg(void __iomem *onenand_base, int latency,
- int sync_read, int sync_write, int hf, int vhf)
+static void set_onenand_cfg(void __iomem *onenand_base)
{
u32 reg;
reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
ONENAND_SYS_CFG1_BL_16;
- if (sync_read)
+ if (onenand_flags & ONENAND_FLAG_SYNCREAD)
reg |= ONENAND_SYS_CFG1_SYNC_READ;
else
reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
- if (sync_write)
+ if (onenand_flags & ONENAND_FLAG_SYNCWRITE)
reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
else
reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
- if (hf)
+ if (onenand_flags & ONENAND_FLAG_HF)
reg |= ONENAND_SYS_CFG1_HF;
else
reg &= ~ONENAND_SYS_CFG1_HF;
- if (vhf)
+ if (onenand_flags & ONENAND_FLAG_VHF)
reg |= ONENAND_SYS_CFG1_VHF;
else
reg &= ~ONENAND_SYS_CFG1_VHF;
}
static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
- void __iomem *onenand_base, bool *clk_dep)
+ void __iomem *onenand_base)
{
u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID);
- int freq = 0;
-
- if (cfg->get_freq) {
- struct onenand_freq_info fi;
-
- fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID);
- fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID);
- fi.ver_id = ver;
- freq = cfg->get_freq(&fi, clk_dep);
- if (freq)
- return freq;
- }
+ int freq;
switch ((ver >> 4) & 0xf) {
case 0:
return freq;
}
-static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
- void __iomem *onenand_base,
- int *freq_ptr)
+static struct gpmc_timings
+omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
+ int freq)
{
struct gpmc_timings t;
const int t_cer = 15;
const int t_wpl = 40;
const int t_wph = 30;
int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
- int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
- int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
- int err, ticks_cez;
- int cs = cfg->cs, freq = *freq_ptr;
u32 reg;
- bool clk_dep = false;
+ int div, fclk_offset_ns, gpmc_clk_ns;
+ int ticks_cez;
+ int cs = cfg->cs;
- if (cfg->flags & ONENAND_SYNC_READ) {
- sync_read = 1;
- } else if (cfg->flags & ONENAND_SYNC_READWRITE) {
- sync_read = 1;
- sync_write = 1;
- } else
- return omap2_onenand_set_async_mode(cs, onenand_base);
-
- if (!freq) {
- /* Very first call freq is not known */
- err = omap2_onenand_set_async_mode(cs, onenand_base);
- if (err)
- return err;
- freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep);
- first_time = 1;
- }
+ if (cfg->flags & ONENAND_SYNC_READ)
+ onenand_flags = ONENAND_FLAG_SYNCREAD;
+ else if (cfg->flags & ONENAND_SYNC_READWRITE)
+ onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE;
switch (freq) {
case 104:
t_ach = 9;
t_aavdh = 7;
t_rdyo = 15;
- sync_write = 0;
+ onenand_flags &= ~ONENAND_FLAG_SYNCWRITE;
break;
}
- div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+ div = gpmc_calc_divider(min_gpmc_clk_period);
gpmc_clk_ns = gpmc_ticks_to_ns(div);
if (gpmc_clk_ns < 15) /* >66Mhz */
- hf = 1;
+ onenand_flags |= ONENAND_FLAG_HF;
+ else
+ onenand_flags &= ~ONENAND_FLAG_HF;
if (gpmc_clk_ns < 12) /* >83Mhz */
- vhf = 1;
- if (vhf)
+ onenand_flags |= ONENAND_FLAG_VHF;
+ else
+ onenand_flags &= ~ONENAND_FLAG_VHF;
+ if (onenand_flags & ONENAND_FLAG_VHF)
latency = 8;
- else if (hf)
+ else if (onenand_flags & ONENAND_FLAG_HF)
latency = 6;
else if (gpmc_clk_ns >= 25) /* 40 MHz*/
latency = 3;
else
latency = 4;
- if (clk_dep) {
- if (gpmc_clk_ns < 12) { /* >83Mhz */
- t_ces = 3;
- t_avds = 4;
- } else if (gpmc_clk_ns < 15) { /* >66Mhz */
- t_ces = 5;
- t_avds = 4;
- } else if (gpmc_clk_ns < 25) { /* >40Mhz */
- t_ces = 6;
- t_avds = 5;
- } else {
- t_ces = 7;
- t_avds = 7;
- }
- }
-
- if (first_time)
- set_onenand_cfg(onenand_base, latency,
- sync_read, sync_write, hf, vhf);
+ /* Set synchronous read timings */
+ memset(&t, 0, sizeof(t));
if (div == 1) {
reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
}
- /* Set synchronous read timings */
- memset(&t, 0, sizeof(t));
t.sync_clk = min_gpmc_clk_period;
t.cs_on = 0;
t.adv_on = 0;
ticks_cez);
/* Write */
- if (sync_write) {
+ if (onenand_flags & ONENAND_FLAG_SYNCWRITE) {
t.adv_wr_off = t.adv_rd_off;
t.we_on = 0;
t.we_off = t.cs_rd_off;
}
}
+ return t;
+}
+
+static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t)
+{
+ unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD;
+ unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE;
+
/* Configure GPMC for synchronous read */
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
GPMC_CONFIG1_WRAPBURST_SUPP |
GPMC_CONFIG1_DEVICETYPE_NOR |
GPMC_CONFIG1_MUXADDDATA);
- err = gpmc_cs_set_timings(cs, &t);
- if (err)
- return err;
+ return gpmc_cs_set_timings(cs, t);
+}
+
+static int omap2_onenand_setup_async(void __iomem *onenand_base)
+{
+ struct gpmc_timings t;
+ int ret;
+
+ omap2_onenand_set_async_mode(onenand_base);
- set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf);
+ t = omap2_onenand_calc_async_timings();
+
+ ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ omap2_onenand_set_async_mode(onenand_base);
+
+ return 0;
+}
+
+static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
+{
+ int ret, freq = *freq_ptr;
+ struct gpmc_timings t;
+
+ if (!freq) {
+ /* Very first call freq is not known */
+ freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base);
+ set_onenand_cfg(onenand_base);
+ }
+
+ t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq);
+
+ ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ set_onenand_cfg(onenand_base);
*freq_ptr = freq;
static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
{
struct device *dev = &gpmc_onenand_device.dev;
+ unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE;
+ int ret;
- /* Set sync timings in GPMC */
- if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
- freq_ptr) < 0) {
- dev_err(dev, "Unable to set synchronous mode\n");
- return -EINVAL;
+ ret = omap2_onenand_setup_async(onenand_base);
+ if (ret) {
+ dev_err(dev, "unable to set to async mode\n");
+ return ret;
}
- return 0;
+ if (!(gpmc_onenand_data->flags & l))
+ return 0;
+
+ ret = omap2_onenand_setup_sync(onenand_base, freq_ptr);
+ if (ret)
+ dev_err(dev, "unable to set to sync mode\n");
+ return ret;
}
void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
}
+ if (cpu_is_omap34xx())
+ gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX;
+ else
+ gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX;
+
err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
(unsigned long *)&gpmc_onenand_resource.start);
if (err < 0) {
--- /dev/null
+/*
+ * arch/arm/mach-omap2/gpmc-onenand.h
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __OMAP2_GPMC_ONENAND_H
+#define __OMAP2_GPMC_ONENAND_H
+
+#include <linux/platform_data/mtd-onenand-omap2.h>
+
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+#else
+#define board_onenand_data NULL
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+#endif
+
+#endif
#include <linux/io.h>
#include <linux/smc91x.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "gpmc-smc91x.h"
#include "soc.h"
#include <linux/io.h>
#include <linux/smsc911x.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "gpmc-smsc911x.h"
static struct resource gpmc_smsc911x_resources[] = {
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <asm/mach-types.h>
-#include <plat/gpmc.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/cpu.h>
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-#include <plat/omap_device.h>
+#include <asm/mach-types.h>
#include "soc.h"
#include "common.h"
+#include "omap_device.h"
+#include "gpmc.h"
#define DEVICE_NAME "omap-gpmc"
#define GPMC_ECC_SIZE_CONFIG 0x1fc
#define GPMC_ECC1_RESULT 0x200
#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */
/* GPMC ECC control settings */
#define GPMC_ECC_CTRL_ECCCLEAR 0x100
#define GPMC_CS0_OFFSET 0x60
#define GPMC_CS_SIZE 0x30
+#define GPMC_BCH_SIZE 0x10
#define GPMC_MEM_START 0x00000000
#define GPMC_MEM_END 0x3FFFFFFF
static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
static unsigned int gpmc_cs_map; /* flag for cs which are initialized */
-static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */
static struct device *gpmc_dev;
static int gpmc_irq;
static resource_size_t phys_base, mem_size;
return __raw_readl(gpmc_base + idx);
}
-static void gpmc_cs_write_byte(int cs, int idx, u8 val)
-{
- void __iomem *reg_addr;
-
- reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
- __raw_writeb(val, reg_addr);
-}
-
-static u8 gpmc_cs_read_byte(int cs, int idx)
-{
- void __iomem *reg_addr;
-
- reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
- return __raw_readb(reg_addr);
-}
-
void gpmc_cs_write_reg(int cs, int idx, u32 val)
{
void __iomem *reg_addr;
return -1
#endif
-int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
+int gpmc_calc_divider(unsigned int sync_clk)
{
int div;
u32 l;
int div;
u32 l;
- div = gpmc_cs_calc_divider(cs, t->sync_clk);
+ div = gpmc_calc_divider(t->sync_clk);
if (div < 0)
return div;
}
EXPORT_SYMBOL(gpmc_cs_free);
-/**
- * gpmc_read_status - read access request to get the different gpmc status
- * @cmd: command type
- * @return status
- */
-int gpmc_read_status(int cmd)
-{
- int status = -EINVAL;
- u32 regval = 0;
-
- switch (cmd) {
- case GPMC_GET_IRQ_STATUS:
- status = gpmc_read_reg(GPMC_IRQSTATUS);
- break;
-
- case GPMC_PREFETCH_FIFO_CNT:
- regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
- status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
- break;
-
- case GPMC_PREFETCH_COUNT:
- regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
- status = GPMC_PREFETCH_STATUS_COUNT(regval);
- break;
-
- case GPMC_STATUS_BUFFER:
- regval = gpmc_read_reg(GPMC_STATUS);
- /* 1 : buffer is available to write */
- status = regval & GPMC_STATUS_BUFF_EMPTY;
- break;
-
- default:
- printk(KERN_ERR "gpmc_read_status: Not supported\n");
- }
- return status;
-}
-EXPORT_SYMBOL(gpmc_read_status);
-
/**
* gpmc_cs_configure - write request to configure gpmc
* @cs: chip select number
}
EXPORT_SYMBOL(gpmc_cs_configure);
-/**
- * gpmc_nand_read - nand specific read access request
- * @cs: chip select number
- * @cmd: command type
- */
-int gpmc_nand_read(int cs, int cmd)
-{
- int rval = -EINVAL;
-
- switch (cmd) {
- case GPMC_NAND_DATA:
- rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
- break;
-
- default:
- printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
- }
- return rval;
-}
-EXPORT_SYMBOL(gpmc_nand_read);
-
-/**
- * gpmc_nand_write - nand specific write request
- * @cs: chip select number
- * @cmd: command type
- * @wval: value to write
- */
-int gpmc_nand_write(int cs, int cmd, int wval)
-{
- int err = 0;
-
- switch (cmd) {
- case GPMC_NAND_COMMAND:
- gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
- break;
-
- case GPMC_NAND_ADDRESS:
- gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
- break;
-
- case GPMC_NAND_DATA:
- gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
-
- default:
- printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
- err = -EINVAL;
- }
- return err;
-}
-EXPORT_SYMBOL(gpmc_nand_write);
-
-
-
-/**
- * gpmc_prefetch_enable - configures and starts prefetch transfer
- * @cs: cs (chip select) number
- * @fifo_th: fifo threshold to be used for read/ write
- * @dma_mode: dma mode enable (1) or disable (0)
- * @u32_count: number of bytes to be transferred
- * @is_write: prefetch read(0) or write post(1) mode
- */
-int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
- unsigned int u32_count, int is_write)
-{
-
- if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
- pr_err("gpmc: fifo threshold is not supported\n");
- return -1;
- } else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
- /* Set the amount of bytes to be prefetched */
- gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
-
- /* Set dma/mpu mode, the prefetch read / post write and
- * enable the engine. Set which cs is has requested for.
- */
- gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
- PREFETCH_FIFOTHRESHOLD(fifo_th) |
- ENABLE_PREFETCH |
- (dma_mode << DMA_MPU_MODE) |
- (0x1 & is_write)));
-
- /* Start the prefetch engine */
- gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
- } else {
- return -EBUSY;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_enable);
-
-/**
- * gpmc_prefetch_reset - disables and stops the prefetch engine
- */
-int gpmc_prefetch_reset(int cs)
-{
- u32 config1;
-
- /* check if the same module/cs is trying to reset */
- config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
- if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
- return -EINVAL;
-
- /* Stop the PFPW engine */
- gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
-
- /* Reset/disable the PFPW engine */
- gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
-
- return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_reset);
-
void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
{
+ int i;
+
reg->gpmc_status = gpmc_base + GPMC_STATUS;
reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
- reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+
+ for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) {
+ reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 +
+ GPMC_BCH_SIZE * i;
+ }
}
int gpmc_get_client_irq(unsigned irq_config)
}
}
#endif /* CONFIG_ARCH_OMAP3 */
-
-/**
- * gpmc_enable_hwecc - enable hardware ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @ecc_size: bytes for which ECC will be generated
- */
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
-{
- unsigned int val;
-
- /* check if ecc module is in used */
- if (gpmc_ecc_used != -EINVAL)
- return -EINVAL;
-
- gpmc_ecc_used = cs;
-
- /* clear ecc and enable bits */
- gpmc_write_reg(GPMC_ECC_CONTROL,
- GPMC_ECC_CTRL_ECCCLEAR |
- GPMC_ECC_CTRL_ECCREG1);
-
- /* program ecc and result sizes */
- val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
- gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
-
- switch (mode) {
- case GPMC_ECC_READ:
- case GPMC_ECC_WRITE:
- gpmc_write_reg(GPMC_ECC_CONTROL,
- GPMC_ECC_CTRL_ECCCLEAR |
- GPMC_ECC_CTRL_ECCREG1);
- break;
- case GPMC_ECC_READSYN:
- gpmc_write_reg(GPMC_ECC_CONTROL,
- GPMC_ECC_CTRL_ECCCLEAR |
- GPMC_ECC_CTRL_ECCDISABLE);
- break;
- default:
- printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
- break;
- }
-
- /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
- val = (dev_width << 7) | (cs << 1) | (0x1);
- gpmc_write_reg(GPMC_ECC_CONFIG, val);
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc);
-
-/**
- * gpmc_calculate_ecc - generate non-inverted ecc bytes
- * @cs: chip select number
- * @dat: data pointer over which ecc is computed
- * @ecc_code: ecc code buffer
- *
- * Using non-inverted ECC is considered ugly since writing a blank
- * page (padding) will clear the ECC bytes. This is not a problem as long
- * no one is trying to write data on the seemingly unused page. Reading
- * an erased page will produce an ECC mismatch between generated and read
- * ECC bytes that has to be dealt with separately.
- */
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
-{
- unsigned int val = 0x0;
-
- if (gpmc_ecc_used != cs)
- return -EINVAL;
-
- /* read ecc result */
- val = gpmc_read_reg(GPMC_ECC1_RESULT);
- *ecc_code++ = val; /* P128e, ..., P1e */
- *ecc_code++ = val >> 16; /* P128o, ..., P1o */
- /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
- *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-
- gpmc_ecc_used = -EINVAL;
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
-
-#ifdef CONFIG_ARCH_OMAP3
-
-/**
- * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
- * @cs: chip select number
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- *
- * This function must be executed before any call to gpmc_enable_hwecc_bch.
- */
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
-{
- /* check if ecc module is in use */
- if (gpmc_ecc_used != -EINVAL)
- return -EINVAL;
-
- /* support only OMAP3 class */
- if (!cpu_is_omap34xx()) {
- printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
- return -EINVAL;
- }
-
- /*
- * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
- * Other chips may be added if confirmed to work.
- */
- if ((nerrors == 4) &&
- (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
- printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
- return -EINVAL;
- }
-
- /* sanity check */
- if (nsectors > 8) {
- printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
- nsectors);
- return -EINVAL;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
-
-/**
- * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- */
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
- int nerrors)
-{
- unsigned int val;
-
- /* check if ecc module is in use */
- if (gpmc_ecc_used != -EINVAL)
- return -EINVAL;
-
- gpmc_ecc_used = cs;
-
- /* clear ecc and enable bits */
- gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
-
- /*
- * When using BCH, sector size is hardcoded to 512 bytes.
- * Here we are using wrapping mode 6 both for reading and writing, with:
- * size0 = 0 (no additional protected byte in spare area)
- * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
- */
- gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
-
- /* BCH configuration */
- val = ((1 << 16) | /* enable BCH */
- (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
- (0x06 << 8) | /* wrap mode = 6 */
- (dev_width << 7) | /* bus width */
- (((nsectors-1) & 0x7) << 4) | /* number of sectors */
- (cs << 1) | /* ECC CS */
- (0x1)); /* enable ECC */
-
- gpmc_write_reg(GPMC_ECC_CONFIG, val);
- gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
-
-/**
- * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
- * @cs: chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
-{
- int i;
- unsigned long nsectors, reg, val1, val2;
-
- if (gpmc_ecc_used != cs)
- return -EINVAL;
-
- nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-
- for (i = 0; i < nsectors; i++) {
-
- reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-
- /* Read hw-computed remainder */
- val1 = gpmc_read_reg(reg + 0);
- val2 = gpmc_read_reg(reg + 4);
-
- /*
- * Add constant polynomial to remainder, in order to get an ecc
- * sequence of 0xFFs for a buffer filled with 0xFFs; and
- * left-justify the resulting polynomial.
- */
- *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
- *ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF);
- *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
- *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
- *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
- *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
- *ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
- }
-
- gpmc_ecc_used = -EINVAL;
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
-
-/**
- * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
- * @cs: chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
-{
- int i;
- unsigned long nsectors, reg, val1, val2, val3, val4;
-
- if (gpmc_ecc_used != cs)
- return -EINVAL;
-
- nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-
- for (i = 0; i < nsectors; i++) {
-
- reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-
- /* Read hw-computed remainder */
- val1 = gpmc_read_reg(reg + 0);
- val2 = gpmc_read_reg(reg + 4);
- val3 = gpmc_read_reg(reg + 8);
- val4 = gpmc_read_reg(reg + 12);
-
- /*
- * Add constant polynomial to remainder, in order to get an ecc
- * sequence of 0xFFs for a buffer filled with 0xFFs.
- */
- *ecc++ = 0xef ^ (val4 & 0xFF);
- *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
- *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
- *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
- *ecc++ = 0xed ^ (val3 & 0xFF);
- *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
- *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
- *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
- *ecc++ = 0x97 ^ (val2 & 0xFF);
- *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
- *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
- *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
- *ecc++ = 0xb5 ^ (val1 & 0xFF);
- }
-
- gpmc_ecc_used = -EINVAL;
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
-
-#endif /* CONFIG_ARCH_OMAP3 */
#ifndef __OMAP2_GPMC_H
#define __OMAP2_GPMC_H
+#include <linux/platform_data/mtd-nand-omap2.h>
+
/* Maximum Number of Chip Selects */
#define GPMC_CS_NUM 8
#define GPMC_SET_IRQ_STATUS 0x00000004
#define GPMC_CONFIG_WP 0x00000005
-#define GPMC_GET_IRQ_STATUS 0x00000006
-#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */
-#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/
-#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */
-
-#define GPMC_NAND_COMMAND 0x0000000a
-#define GPMC_NAND_ADDRESS 0x0000000b
-#define GPMC_NAND_DATA 0x0000000c
-
#define GPMC_ENABLE_IRQ 0x0000000d
/* ECC commands */
#define GPMC_DEVICETYPE_NOR 0
#define GPMC_DEVICETYPE_NAND 2
#define GPMC_CONFIG_WRITEPROTECT 0x00000010
-#define GPMC_STATUS_BUFF_EMPTY 0x00000001
#define WR_RD_PIN_MONITORING 0x00600000
-#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
-#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
#define GPMC_IRQ_FIFOEVENTENABLE 0x01
#define GPMC_IRQ_COUNT_EVENT 0x02
-#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
-#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
-
-enum omap_ecc {
- /* 1-bit ecc: stored at end of spare area */
- OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
- OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
- /* 1-bit ecc: stored at beginning of spare area as romcode */
- OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
- OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
- OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
-};
/*
* Note that all values in this struct are in nanoseconds except sync_clk
u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */
};
-struct gpmc_nand_regs {
- void __iomem *gpmc_status;
- void __iomem *gpmc_nand_command;
- void __iomem *gpmc_nand_address;
- void __iomem *gpmc_nand_data;
- void __iomem *gpmc_prefetch_config1;
- void __iomem *gpmc_prefetch_config2;
- void __iomem *gpmc_prefetch_control;
- void __iomem *gpmc_prefetch_status;
- void __iomem *gpmc_ecc_config;
- void __iomem *gpmc_ecc_control;
- void __iomem *gpmc_ecc_size_config;
- void __iomem *gpmc_ecc1_result;
- void __iomem *gpmc_bch_result0;
-};
-
extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
extern int gpmc_get_client_irq(unsigned irq_config);
extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
extern u32 gpmc_cs_read_reg(int cs, int idx);
-extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_calc_divider(unsigned int sync_clk);
extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
extern void gpmc_cs_free(int cs);
extern int gpmc_cs_set_reserved(int cs, int reserved);
extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
- unsigned int u32_count, int is_write);
-extern int gpmc_prefetch_reset(int cs);
extern void omap3_gpmc_save_context(void);
extern void omap3_gpmc_restore_context(void);
-extern int gpmc_read_status(int cmd);
extern int gpmc_cs_configure(int cs, int cmd, int wval);
-extern int gpmc_nand_read(int cs, int cmd);
-extern int gpmc_nand_write(int cs, int cmd, int wval);
-
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
-
-#ifdef CONFIG_ARCH_OMAP3
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors);
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
- int nerrors);
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc);
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc);
-#endif /* CONFIG_ARCH_OMAP3 */
#endif
#include <linux/err.h>
#include <linux/platform_device.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
#include "hdq1w.h"
+#include "prm.h"
#include "common.h"
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT 10000
-
/**
* omap_hdq1w_reset - reset the OMAP HDQ1W module
* @oh: struct omap_hwmod *
#ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H
#define ARCH_ARM_MACH_OMAP2_HDQ1W_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
/*
* XXX A future cleanup patch should modify
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <linux/platform_data/gpio-omap.h>
-#include <plat/mmc.h>
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+#include "soc.h"
+#include "omap_device.h"
+#include "omap-pm.h"
#include "mux.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
#include <linux/err.h>
#include <linux/hwspinlock.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
.base_id = 0,
*
*/
-#include <plat/i2c.h>
-#include "common.h"
-#include <plat/omap_hwmod.h>
+#include "soc.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "prm.h"
+#include "common.h"
#include "mux.h"
+#include "i2c.h"
/* In register I2C_CON, Bit 15 is the I2C enable bit */
#define I2C_EN BIT(15)
#define OMAP2_I2C_CON_OFFSET 0x24
#define OMAP4_I2C_CON_OFFSET 0xA4
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT 10000
+#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16
-void __init omap2_i2c_mux_pins(int bus_id)
+static void __init omap2_i2c_mux_pins(int bus_id)
{
char mux_name[sizeof("i2c2_scl.i2c2_scl")];
return 0;
}
+
+static int __init omap_i2c_nr_ports(void)
+{
+ int ports = 0;
+
+ if (cpu_is_omap24xx())
+ ports = 2;
+ else if (cpu_is_omap34xx())
+ ports = 3;
+ else if (cpu_is_omap44xx())
+ ports = 4;
+ return ports;
+}
+
+static const char name[] = "omap_i2c";
+
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
+ int bus_id)
+{
+ int l;
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+ char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
+ struct omap_i2c_bus_platform_data *pdata;
+ struct omap_i2c_dev_attr *dev_attr;
+
+ if (bus_id > omap_i2c_nr_ports())
+ return -EINVAL;
+
+ omap2_i2c_mux_pins(bus_id);
+
+ l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
+ WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
+ "String buffer overflow in I2C%d device setup\n", bus_id);
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", oh_name);
+ return -EEXIST;
+ }
+
+ pdata = i2c_pdata;
+ /*
+ * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
+ * use, and functionality implementation flags, up to the OMAP I2C
+ * driver via platform data
+ */
+ pdata->rev = oh->class->rev;
+
+ dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
+ pdata->flags = dev_attr->flags;
+
+ pdev = omap_device_build(name, bus_id, oh, pdata,
+ sizeof(struct omap_i2c_bus_platform_data),
+ NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
+
+ return PTR_RET(pdev);
+}
+
--- /dev/null
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <plat/i2c.h>
+
+#ifndef __MACH_OMAP2_I2C_H
+#define __MACH_OMAP2_I2C_H
+
+/**
+ * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
+ * @fifo_depth: total controller FIFO size (in bytes)
+ * @flags: differences in hardware support capability
+ *
+ * @fifo_depth represents what exists on the hardware, not what is
+ * actually configured at runtime by the device driver.
+ */
+struct omap_i2c_dev_attr {
+ u8 fifo_depth;
+ u32 flags;
+};
+
+int omap_i2c_reset(struct omap_hwmod *oh);
+
+#endif /* __MACH_OMAP2_I2C_H */
* detect the exact revision later on in omap2_detect_revision() once map_io
* is done.
*/
-void __init omap2_set_globals_tap(struct omap_globals *omap2_globals)
+void __init omap2_set_globals_tap(u32 class, void __iomem *tap)
{
- omap_revision = omap2_globals->class;
- tap_base = omap2_globals->tap;
+ omap_revision = class;
+ tap_base = tap;
+ /* XXX What is this intended to do? */
if (cpu_is_omap34xx())
tap_prod_id = 0x0210;
else
#include <linux/serial_reg.h>
-#include <plat/serial.h>
+#include <mach/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
+++ /dev/null
-/*
- * arch/arm/mach-omap2/include/mach/gpio.h
- */
/*
- * arch/arm/plat-omap/include/mach/serial.h
- *
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* GNU General Public License for more details.
*/
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <linux/init.h>
-
/*
* Memory entry used for the DEBUG_LL UART configuration, relative to
* start of RAM. See also uncompress.h and debug-macro.S.
*/
#define OMAP_UART_INFO_OFS 0x3ffc
-/* OMAP1 serial ports */
-#define OMAP1_UART1_BASE 0xfffb0000
-#define OMAP1_UART2_BASE 0xfffb0800
-#define OMAP1_UART3_BASE 0xfffb9800
-
/* OMAP2 serial ports */
#define OMAP2_UART1_BASE 0x4806a000
#define OMAP2_UART2_BASE 0x4806c000
#define ZOOM_UART_VIRT 0xfa400000
#define OMAP_PORT_SHIFT 2
-#define OMAP7XX_PORT_SHIFT 0
#define ZOOM_PORT_SHIFT 1
-#define OMAP1510_BASE_BAUD (12000000/16)
-#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
/*
* DEBUG_LL port encoding stored into the UART1 scratchpad register by
* decomp_setup in uncompress.h
*/
-#define OMAP1UART1 11
-#define OMAP1UART2 12
-#define OMAP1UART3 13
#define OMAP2UART1 21
#define OMAP2UART2 22
#define OMAP2UART3 23
#define OMAP5UART4 OMAP4UART4
#define ZOOM_UART 95 /* Only on zoom2/3 */
-/* This is only used by 8250.c for omap1510 */
-#define is_omap_port(pt) ({int __ret = 0; \
- if ((pt)->port.mapbase == OMAP1_UART1_BASE || \
- (pt)->port.mapbase == OMAP1_UART2_BASE || \
- (pt)->port.mapbase == OMAP1_UART3_BASE) \
- __ret = 1; \
- __ret; \
- })
-
#ifndef __ASSEMBLER__
struct omap_board_data;
extern void omap_serial_init_port(struct omap_board_data *bdata,
struct omap_uart_port_info *platform_data);
#endif
-
-#endif
/*
- * arch/arm/mach-omap2/include/mach/uncompress.h
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
*/
-#include <plat/uncompress.h>
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+
+#include <mach/serial.h>
+
+#define MDR1_MODE_MASK 0x07
+
+volatile u8 *uart_base;
+int uart_shift;
+
+/*
+ * Store the DEBUG_LL uart number into memory.
+ * See also debug-macro.S, and serial.c for related code.
+ */
+static void set_omap_uart_info(unsigned char port)
+{
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart_shift & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+ *uart_info = port;
+}
+
+static void putc(int c)
+{
+ if (!uart_base)
+ return;
+
+ /* Check for UART 16x mode */
+ if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+ return;
+
+ while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
+ barrier();
+ uart_base[UART_TX << uart_shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
+ if (machine_is_##mach()) { \
+ uart_base = (volatile u8 *)(dbg_uart); \
+ uart_shift = (dbg_shft); \
+ port = (dbg_id); \
+ set_omap_uart_info(port); \
+ break; \
+ }
+
+#define DEBUG_LL_OMAP2(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP2UART##p)
+
+#define DEBUG_LL_OMAP3(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP3UART##p)
+
+#define DEBUG_LL_OMAP4(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP4UART##p)
+
+#define DEBUG_LL_OMAP5(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP5UART##p)
+/* Zoom2/3 shift is different for UART1 and external port */
+#define DEBUG_LL_ZOOM(mach) \
+ _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+
+#define DEBUG_LL_TI81XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ TI81XXUART##p)
+
+#define DEBUG_LL_AM33XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ AM33XXUART##p)
+
+static inline void arch_decomp_setup(void)
+{
+ int port = 0;
+
+ /*
+ * Initialize the port based on the machine ID from the bootloader.
+ * Note that we're using macros here instead of switch statement
+ * as machine_is functions are optimized out for the boards that
+ * are not selected.
+ */
+ do {
+ /* omap2 based boards using UART1 */
+ DEBUG_LL_OMAP2(1, omap_2430sdp);
+ DEBUG_LL_OMAP2(1, omap_apollon);
+ DEBUG_LL_OMAP2(1, omap_h4);
+
+ /* omap2 based boards using UART3 */
+ DEBUG_LL_OMAP2(3, nokia_n800);
+ DEBUG_LL_OMAP2(3, nokia_n810);
+ DEBUG_LL_OMAP2(3, nokia_n810_wimax);
+
+ /* omap3 based boards using UART1 */
+ DEBUG_LL_OMAP2(1, omap3evm);
+ DEBUG_LL_OMAP3(1, omap_3430sdp);
+ DEBUG_LL_OMAP3(1, omap_3630sdp);
+ DEBUG_LL_OMAP3(1, omap3530_lv_som);
+ DEBUG_LL_OMAP3(1, omap3_torpedo);
+
+ /* omap3 based boards using UART3 */
+ DEBUG_LL_OMAP3(3, cm_t35);
+ DEBUG_LL_OMAP3(3, cm_t3517);
+ DEBUG_LL_OMAP3(3, cm_t3730);
+ DEBUG_LL_OMAP3(3, craneboard);
+ DEBUG_LL_OMAP3(3, devkit8000);
+ DEBUG_LL_OMAP3(3, igep0020);
+ DEBUG_LL_OMAP3(3, igep0030);
+ DEBUG_LL_OMAP3(3, nokia_rm680);
+ DEBUG_LL_OMAP3(3, nokia_rm696);
+ DEBUG_LL_OMAP3(3, nokia_rx51);
+ DEBUG_LL_OMAP3(3, omap3517evm);
+ DEBUG_LL_OMAP3(3, omap3_beagle);
+ DEBUG_LL_OMAP3(3, omap3_pandora);
+ DEBUG_LL_OMAP3(3, omap_ldp);
+ DEBUG_LL_OMAP3(3, overo);
+ DEBUG_LL_OMAP3(3, touchbook);
+
+ /* omap4 based boards using UART3 */
+ DEBUG_LL_OMAP4(3, omap_4430sdp);
+ DEBUG_LL_OMAP4(3, omap4_panda);
+
+ /* omap5 based boards using UART3 */
+ DEBUG_LL_OMAP5(3, omap5_sevm);
+
+ /* zoom2/3 external uart */
+ DEBUG_LL_ZOOM(omap_zoom2);
+ DEBUG_LL_ZOOM(omap_zoom3);
+
+ /* TI8168 base boards using UART3 */
+ DEBUG_LL_TI81XX(3, ti8168evm);
+
+ /* TI8148 base boards using UART1 */
+ DEBUG_LL_TI81XX(1, ti8148evm);
+
+ /* AM33XX base boards using UART1 */
+ DEBUG_LL_AM33XX(1, am335xevm);
+ } while (0);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
#include <asm/tlb.h>
#include <asm/mach/map.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-#include <plat/serial.h>
-#include <plat/omap-pm.h>
-#include <plat/omap_hwmod.h>
-#include <plat/multi.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+#include "omap_hwmod.h"
#include "soc.h"
#include "iomap.h"
#include "voltage.h"
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
+#include "omap-pm.h"
+#include "sdrc.h"
+#include "control.h"
+#include "serial.h"
+#include "sram.h"
+#include "cm2xxx.h"
+#include "cm3xxx.h"
+#include "prm.h"
+#include "cm.h"
+#include "prcm_mpu44xx.h"
+#include "prminst44xx.h"
+#include "cminst44xx.h"
/*
* The machine specific code may provide the extra mapping besides the
#endif
#ifdef CONFIG_SOC_OMAP2420
-void __init omap242x_map_common_io(void)
+void __init omap242x_map_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
#endif
#ifdef CONFIG_SOC_OMAP2430
-void __init omap243x_map_common_io(void)
+void __init omap243x_map_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
#endif
#ifdef CONFIG_ARCH_OMAP3
-void __init omap34xx_map_common_io(void)
+void __init omap3_map_io(void)
{
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
}
#endif
#ifdef CONFIG_SOC_TI81XX
-void __init omapti81xx_map_common_io(void)
+void __init ti81xx_map_io(void)
{
iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc));
}
#endif
#ifdef CONFIG_SOC_AM33XX
-void __init omapam33xx_map_common_io(void)
+void __init am33xx_map_io(void)
{
iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc));
}
#endif
#ifdef CONFIG_ARCH_OMAP4
-void __init omap44xx_map_common_io(void)
+void __init omap4_map_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
omap_barriers_init();
#endif
#ifdef CONFIG_SOC_OMAP5
-void __init omap5_map_common_io(void)
+void __init omap5_map_io(void)
{
iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
}
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
-static void __init omap_common_init_early(void)
-{
- omap_init_consistent_dma_size();
-}
-
static void __init omap_hwmod_init_postsetup(void)
{
u8 postsetup_state;
#ifdef CONFIG_SOC_OMAP2420
void __init omap2420_init_early(void)
{
- omap2_set_globals_242x();
+ omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000));
+ omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
+ OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
+ omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
+ NULL);
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL);
omap2xxx_check_revision();
- omap_common_init_early();
+ omap2xxx_cm_init();
omap2xxx_voltagedomains_init();
omap242x_powerdomains_init();
omap242x_clockdomains_init();
#ifdef CONFIG_SOC_OMAP2430
void __init omap2430_init_early(void)
{
- omap2_set_globals_243x();
+ omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000));
+ omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
+ OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
+ omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
+ NULL);
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL);
omap2xxx_check_revision();
- omap_common_init_early();
+ omap2xxx_cm_init();
omap2xxx_voltagedomains_init();
omap243x_powerdomains_init();
omap243x_clockdomains_init();
#ifdef CONFIG_ARCH_OMAP3
void __init omap3_init_early(void)
{
- omap2_set_globals_3xxx();
+ omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000));
+ omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
+ OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE));
+ omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
+ NULL);
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL);
omap3xxx_check_revision();
omap3xxx_check_features();
- omap_common_init_early();
+ omap3xxx_cm_init();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
void __init ti81xx_init_early(void)
{
- omap2_set_globals_ti81xx();
+ omap2_set_globals_tap(OMAP343X_CLASS,
+ OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
+ omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
+ NULL);
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL);
omap3xxx_check_revision();
ti81xx_check_features();
- omap_common_init_early();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
#ifdef CONFIG_SOC_AM33XX
void __init am33xx_init_early(void)
{
- omap2_set_globals_am33xx();
+ omap2_set_globals_tap(AM335X_CLASS,
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
+ omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
+ NULL);
+ omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE));
+ omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL);
omap3xxx_check_revision();
ti81xx_check_features();
- omap_common_init_early();
am33xx_voltagedomains_init();
am33xx_powerdomains_init();
am33xx_clockdomains_init();
#ifdef CONFIG_ARCH_OMAP4
void __init omap4430_init_early(void)
{
- omap2_set_globals_443x();
+ omap2_set_globals_tap(OMAP443X_CLASS,
+ OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
+ omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+ OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE));
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
+ OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE));
+ omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
+ omap_prm_base_init();
+ omap_cm_base_init();
omap4xxx_check_revision();
omap4xxx_check_features();
- omap_common_init_early();
omap44xx_voltagedomains_init();
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
#ifdef CONFIG_SOC_OMAP5
void __init omap5_init_early(void)
{
- omap2_set_globals_5xxx();
+ omap2_set_globals_tap(OMAP54XX_CLASS,
+ OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
+ omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
+ OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
+ OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
+ omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+ omap_prm_base_init();
+ omap_cm_base_init();
omap5xxx_check_revision();
- omap_common_init_early();
}
#endif
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
-
-#include <plat/dma.h>
-#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
+#include <plat-omap/dma-omap.h>
+
+#include "omap_device.h"
+
/*
* FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
* Sidetone needs non-gated ICLK and sidetone autoidle is broken.
*/
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
static int omap3_enable_st_clock(unsigned int id, bool enable)
--- /dev/null
+#include <linux/mmc/host.h>
+#include <linux/platform_data/mmc-omap.h>
+
+#define OMAP24XX_NR_MMC 2
+#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
+#define OMAP2_MMC1_BASE 0x4809c000
+
+#define OMAP4_MMC_REG_OFFSET 0x100
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
+#else
+static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
+{
+}
+#endif
+
+struct omap_hwmod;
+int omap_msdi_reset(struct omap_hwmod *oh);
+
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
+ int is_closed);
#include <linux/err.h>
#include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/mmc.h>
-
+#include "prm.h"
#include "common.h"
#include "control.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
#include "mux.h"
+#include "mmc.h"
/*
* MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
#define MSDI_CON_CLKD_MASK (0x3f << 0)
#define MSDI_CON_CLKD_SHIFT 0
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT 10000
-
/* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */
#define MSDI_TARGET_RESET_CLKD 0x3ff
#include <linux/interrupt.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
+#include "soc.h"
#include "control.h"
#include "mux.h"
#include "prm.h"
#include <asm/suspend.h>
#include <asm/hardware/cache-l2x0.h>
+#include "soc.h"
#include "common.h"
#include "omap44xx.h"
#include "omap4-sar-layout.h"
#include <linux/device.h>
#include <linux/platform_device.h>
-/* Interface documentation is in mach/omap-pm.h */
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
+#include "omap-pm.h"
static bool off_mode_enabled;
static int dummy_context_loss_counter;
#include <asm/cacheflush.h>
#include <asm/memblock.h>
-#include <plat/omap-secure.h>
#include "omap-secure.h"
static phys_addr_t omap_secure_memblock_base;
u32 arg1, u32 arg2, u32 arg3, u32 arg4);
extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
extern phys_addr_t omap_secure_ram_mempool_base(void);
+extern int omap_secure_ram_reserve_memblock(void);
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
#endif /* __ASSEMBLER__ */
#endif /* OMAP_ARCH_OMAP_SECURE_H */
--- /dev/null
+/*
+ * omap2-restart.c - code common to all OMAP2xxx machines.
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include "common.h"
+#include "prm2xxx.h"
+
+/*
+ * reset_virt_prcm_set_ck, reset_sys_ck: pointers to the virt_prcm_set
+ * clock and the sys_ck. Used during the reset process
+ */
+static struct clk *reset_virt_prcm_set_ck, *reset_sys_ck;
+
+/* Reboot handling */
+
+/**
+ * omap2xxx_restart - Set DPLL to bypass mode for reboot to work
+ *
+ * Set the DPLL to bypass so that reboot completes successfully. No
+ * return value.
+ */
+void omap2xxx_restart(char mode, const char *cmd)
+{
+ u32 rate;
+
+ rate = clk_get_rate(reset_sys_ck);
+ clk_set_rate(reset_virt_prcm_set_ck, rate);
+
+ /* XXX Should save the cmd argument for use after the reboot */
+
+ omap2xxx_prm_dpll_reset(); /* never returns */
+ while (1);
+}
+
+/**
+ * omap2xxx_common_look_up_clks_for_reset - look up clocks needed for restart
+ *
+ * Some clocks need to be looked up in advance for the SoC restart
+ * operation to work - see omap2xxx_restart(). Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int __init omap2xxx_common_look_up_clks_for_reset(void)
+{
+ reset_virt_prcm_set_ck = clk_get(NULL, "virt_prcm_set");
+ if (IS_ERR(reset_virt_prcm_set_ck))
+ return -EINVAL;
+
+ reset_sys_ck = clk_get(NULL, "sys_ck");
+ if (IS_ERR(reset_sys_ck))
+ return -EINVAL;
+
+ return 0;
+}
+core_initcall(omap2xxx_common_look_up_clks_for_reset);
--- /dev/null
+/*
+ * omap3-restart.c - Code common to all OMAP3xxx machines.
+ *
+ * Copyright (C) 2009, 2012 Texas Instruments
+ * Copyright (C) 2010 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "iomap.h"
+#include "common.h"
+#include "control.h"
+#include "prm3xxx.h"
+
+/* Global address base setup code */
+
+/**
+ * omap3xxx_restart - trigger a software restart of the SoC
+ * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
+ * @cmd: passed from the userspace program rebooting the system (if provided)
+ *
+ * Resets the SoC. For @cmd, see the 'reboot' syscall in
+ * kernel/sys.c. No return value.
+ */
+void omap3xxx_restart(char mode, const char *cmd)
+{
+ omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
+ omap3xxx_prm_dpll3_reset(); /* never returns */
+ while (1);
+}
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <plat/sram.h>
-#include <plat/omap-secure.h>
-#include <plat/mmc.h>
-
#include "omap-wakeupgen.h"
-
#include "soc.h"
+#include "iomap.h"
#include "common.h"
+#include "mmc.h"
#include "hsmmc.h"
+#include "prminst44xx.h"
+#include "prcm_mpu44xx.h"
#include "omap4-sar-layout.h"
+#include "omap-secure.h"
+#include "sram.h"
#ifdef CONFIG_CACHE_L2X0
static void __iomem *l2cache_base;
return 0;
}
#endif
+
+/**
+ * omap44xx_restart - trigger a software restart of the SoC
+ * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
+ * @cmd: passed from the userspace program rebooting the system (if provided)
+ *
+ * Resets the SoC. For @cmd, see the 'reboot' syscall in
+ * kernel/sys.c. No return value.
+ */
+void omap44xx_restart(char mode, const char *cmd)
+{
+ /* XXX Should save 'cmd' into scratchpad for use after reboot */
+ omap4_prminst_global_warm_sw_reset(); /* never returns */
+ while (1);
+}
+
#include <linux/of.h>
#include <linux/notifier.h>
-#include <plat/omap_device.h>
-#include <plat/omap_hwmod.h>
-#include <plat/clock.h>
+#include "omap_device.h"
+#include "omap_hwmod.h"
/* These parameters are passed to _omap_device_{de,}activate() */
#define USE_WAKEUP_LAT 0
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
extern struct dev_pm_domain omap_device_pm_domain;
#include <linux/slab.h>
#include <linux/bootmem.h>
-#include <plat/clock.h>
-#include <plat/omap_hwmod.h>
-#include <plat/prcm.h>
+#include "clock.h"
+#include "omap_hwmod.h"
#include "soc.h"
#include "common.h"
#include "clockdomain.h"
#include "powerdomain.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
+#include "cm3xxx.h"
#include "cminst44xx.h"
#include "cm33xx.h"
-#include "prm2xxx_3xxx.h"
+#include "prm.h"
+#include "prm3xxx.h"
#include "prm44xx.h"
#include "prm33xx.h"
#include "prminst44xx.h"
#include "mux.h"
#include "pm.h"
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT 10000
-
/* Name of the OMAP hwmod for the MPU */
#define MPU_INITIATOR_NAME "mpu"
_enable_sysc(oh);
}
} else {
- _omap4_disable_module(oh);
+ if (soc_ops.disable_module)
+ soc_ops.disable_module(oh);
_disable_clocks(oh);
pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
oh->name, r);
/* Static functions intended only for use in soc_ops field function pointers */
/**
- * _omap2_wait_target_ready - wait for a module to leave slave idle
+ * _omap2xxx_wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle. Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_ready() function.
+ */
+static int _omap2xxx_wait_target_ready(struct omap_hwmod *oh)
+{
+ if (!oh)
+ return -EINVAL;
+
+ if (oh->flags & HWMOD_NO_IDLEST)
+ return 0;
+
+ if (!_find_mpu_rt_port(oh))
+ return 0;
+
+ /* XXX check module SIDLEMODE, hardreset status, enabled clocks */
+
+ return omap2xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
+ oh->prcm.omap2.idlest_reg_id,
+ oh->prcm.omap2.idlest_idle_bit);
+}
+
+/**
+ * _omap3xxx_wait_target_ready - wait for a module to leave slave idle
* @oh: struct omap_hwmod *
*
* Wait for a module @oh to leave slave idle. Returns 0 if the module
* slave idle; otherwise, pass along the return value of the
* appropriate *_cm*_wait_module_ready() function.
*/
-static int _omap2_wait_target_ready(struct omap_hwmod *oh)
+static int _omap3xxx_wait_target_ready(struct omap_hwmod *oh)
{
if (!oh)
return -EINVAL;
/* XXX check module SIDLEMODE, hardreset status, enabled clocks */
- return omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
- oh->prcm.omap2.idlest_reg_id,
- oh->prcm.omap2.idlest_idle_bit);
+ return omap3xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
+ oh->prcm.omap2.idlest_reg_id,
+ oh->prcm.omap2.idlest_idle_bit);
}
/**
*/
void __init omap_hwmod_init(void)
{
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- soc_ops.wait_target_ready = _omap2_wait_target_ready;
+ if (cpu_is_omap24xx()) {
+ soc_ops.wait_target_ready = _omap2xxx_wait_target_ready;
+ soc_ops.assert_hardreset = _omap2_assert_hardreset;
+ soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
+ soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
+ } else if (cpu_is_omap34xx()) {
+ soc_ops.wait_target_ready = _omap3xxx_wait_target_ready;
soc_ops.assert_hardreset = _omap2_assert_hardreset;
soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
#include <linux/list.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
-#include <plat/cpu.h>
struct omap_device;
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
+
+#include <linux/i2c-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/omap_hwmod.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
-#include <plat/i2c.h>
+#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
+
+#include "omap_hwmod.h"
#include "l3_2xxx.h"
#include "l4_2xxx.h"
-#include <plat/mmc.h>
#include "omap_hwmod_common_data.h"
#include "cm-regbits-24xx.h"
#include "prm-regbits-24xx.h"
+#include "i2c.h"
+#include "mmc.h"
+#include "serial.h"
#include "wd_timer.h"
/*
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
+
+#include <linux/i2c-omap.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/omap_hwmod.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
-#include <plat/i2c.h>
+#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
-#include <plat/mmc.h>
+
+#include "omap_hwmod.h"
+#include "mmc.h"
#include "l3_2xxx.h"
#include "soc.h"
#include "omap_hwmod_common_data.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
+#include "i2c.h"
#include "wd_timer.h"
/*
*/
#include <asm/sizes.h>
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
-#include <plat/dma.h>
-#include <plat/common.h>
+
+#include <plat-omap/dma-omap.h>
+
+#include "omap_hwmod.h"
#include "hdq1w.h"
#include "omap_hwmod_common_data.h"
+#include "dma.h"
/* UART */
*/
#include <asm/sizes.h>
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
+#include "omap_hwmod.h"
#include "l3_2xxx.h"
#include "l4_2xxx.h"
+#include "serial.h"
#include "omap_hwmod_common_data.h"
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
+
#include <linux/platform_data/gpio-omap.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#include "cm-regbits-24xx.h"
#include "prm-regbits-24xx.h"
* GNU General Public License for more details.
*/
-#include <plat/omap_hwmod.h>
-#include <plat/cpu.h>
+#include <linux/i2c-omap.h>
+
+#include "omap_hwmod.h"
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/dma.h>
-#include <plat/mmc.h>
-#include <plat/i2c.h>
#include "omap_hwmod_common_data.h"
#include "cm33xx.h"
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
+#include "i2c.h"
+#include "mmc.h"
/*
* IP blocks
*
* XXX these should be marked initdata for multi-OMAP kernels
*/
+
+#include <linux/i2c-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
+#include <plat-omap/dma-omap.h>
#include "l3_3xxx.h"
#include "l4_3xxx.h"
-#include <plat/i2c.h>
-#include <plat/mmc.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <plat/dmtimer.h>
#include "am35xx.h"
#include "soc.h"
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#include "prm-regbits-34xx.h"
#include "cm-regbits-34xx.h"
+
+#include "dma.h"
+#include "i2c.h"
+#include "mmc.h"
#include "wd_timer.h"
+#include "serial.h"
/*
* OMAP3xxx hardware module integration data
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/power/smartreflex.h>
+#include <linux/i2c-omap.h>
+
+#include <plat-omap/dma-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/i2c.h>
-#include <plat/dma.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/mmc.h>
#include <plat/dmtimer.h>
-#include <plat/common.h>
#include <plat/iommu.h>
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
+#include "i2c.h"
+#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all OMAP4 interrupts external to MPUSS */
* data and their integration with other OMAP modules and Linux.
*/
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
#define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
#include "common.h"
#include "display.h"
#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
#define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
#include "voltage.h"
#include <linux/io.h>
#include <linux/err.h>
#include <linux/usb.h>
-
-#include <plat/usb.h>
+#include <linux/usb/musb.h>
#include "soc.h"
#include "control.h"
+#include "usb.h"
void am35x_musb_reset(void)
{
#include <linux/kernel.h>
#include <linux/i2c/twl.h>
+#include "soc.h"
#include "voltage.h"
#include "pm.h"
#include <linux/opp.h>
#include <linux/cpu.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "omap_opp_data.h"
*/
#include <linux/module.h>
+#include "soc.h"
#include "control.h"
#include "omap_opp_data.h"
#include "pm.h"
#include <linux/module.h>
#include <linux/slab.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
+#include "soc.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "pm.h"
#include <asm/system_misc.h>
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+#include "omap-pm.h"
+#include "omap_device.h"
#include "common.h"
+#include "soc.h"
#include "prcm-common.h"
#include "voltage.h"
#include "powerdomain.h"
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <asm/fncpy.h>
+
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <asm/system_misc.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+#include "soc.h"
#include "common.h"
-#include "prm2xxx_3xxx.h"
+#include "clock.h"
+#include "prm2xxx.h"
#include "prm-regbits-24xx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
+#include "sram.h"
#include "pm.h"
#include "control.h"
#include "powerdomain.h"
#include <trace/events/power.h>
+#include <asm/fncpy.h>
#include <asm/suspend.h>
#include <asm/system_misc.h>
-#include <plat/sram.h>
#include "clockdomain.h"
#include "powerdomain.h"
-#include <plat/sdrc.h>
-#include <plat/prcm.h>
-#include <plat/gpmc.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+#include "soc.h"
#include "common.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
+#include "gpmc.h"
#include "prm-regbits-34xx.h"
-
-#include "prm2xxx_3xxx.h"
+#include "prm3xxx.h"
#include "pm.h"
#include "sdrc.h"
+#include "sram.h"
#include "control.h"
/* pm34xx errata defined in pm.h */
#include <linux/slab.h>
#include <asm/system_misc.h>
+#include "soc.h"
#include "common.h"
#include "clockdomain.h"
#include "powerdomain.h"
#include <asm/pmu.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "soc.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
static char *omap2_pmu_oh_names[] = {"mpu"};
static char *omap3_pmu_oh_names[] = {"mpu", "debugss"};
#include <asm/cpu.h>
-#include <plat/prcm.h>
-
#include "powerdomain.h"
#include "clockdomain.h"
#include <linux/atomic.h>
-#include <plat/cpu.h>
-
#include "voltage.h"
/* Powerdomain basic power states */
+++ /dev/null
-/*
- * OMAP2 and OMAP3 powerdomain control
- *
- * Copyright (C) 2009-2011 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/bug.h>
-
-#include <plat/prcm.h>
-
-#include "powerdomain.h"
-#include "prm.h"
-#include "prm-regbits-24xx.h"
-#include "prm-regbits-34xx.h"
-
-
-/* Common functions across OMAP2 and OMAP3 */
-static int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
- omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
- (pwrst << OMAP_POWERSTATE_SHIFT),
- pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL,
- OMAP_POWERSTATE_MASK);
-}
-
-static int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTST,
- OMAP_POWERSTATEST_MASK);
-}
-
-static int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
-
- omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
- omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
-
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
- m);
-}
-
-static int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL, m);
-}
-
-static int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
- u32 v;
-
- v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK);
- omap2_prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v,
- pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
- u32 c = 0;
-
- /*
- * REVISIT: pwrdm_wait_transition() may be better implemented
- * via a callback and a periodic timer check -- how long do we expect
- * powerdomain transitions to take?
- */
-
- /* XXX Is this udelay() value meaningful? */
- while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
- OMAP_INTRANSITION_MASK) &&
- (c++ < PWRDM_TRANSITION_BAILOUT))
- udelay(1);
-
- if (c > PWRDM_TRANSITION_BAILOUT) {
- pr_err("powerdomain: %s: waited too long to complete transition\n",
- pwrdm->name);
- return -EAGAIN;
- }
-
- pr_debug("powerdomain: completed transition in %d loops\n", c);
-
- return 0;
-}
-
-/* Applicable only for OMAP3. Not supported on OMAP2 */
-static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP3430_PM_PREPWSTST,
- OMAP3430_LASTPOWERSTATEENTERED_MASK);
-}
-
-static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTST,
- OMAP3430_LOGICSTATEST_MASK);
-}
-
-static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL,
- OMAP3430_LOGICSTATEST_MASK);
-}
-
-static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP3430_PM_PREPWSTST,
- OMAP3430_LASTLOGICSTATEENTERED_MASK);
-}
-
-static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
-{
- switch (bank) {
- case 0:
- return OMAP3430_LASTMEM1STATEENTERED_MASK;
- case 1:
- return OMAP3430_LASTMEM2STATEENTERED_MASK;
- case 2:
- return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
- case 3:
- return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
- default:
- WARN_ON(1); /* should never happen */
- return -EEXIST;
- }
- return 0;
-}
-
-static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m;
-
- m = omap3_get_mem_bank_lastmemst_mask(bank);
-
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP3430_PM_PREPWSTST, m);
-}
-
-static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
- omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
- return 0;
-}
-
-static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
-{
- return omap2_prm_rmw_mod_reg_bits(0,
- 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
- pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-}
-
-static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
-{
- return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
- 0, pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL);
-}
-
-struct pwrdm_ops omap2_pwrdm_operations = {
- .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
- .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
- .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
- .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
- .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
- .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
- .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
- .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
- .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
-};
-
-struct pwrdm_ops omap3_pwrdm_operations = {
- .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
- .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
- .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
- .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst,
- .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
- .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst,
- .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst,
- .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst,
- .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
- .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
- .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
- .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
- .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst,
- .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst,
- .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar,
- .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar,
- .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
-};
+++ /dev/null
-/*
- * AM33XX Powerdomain control
- *
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak
- * <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-
-#include <plat/prcm.h>
-
-#include "powerdomain.h"
-#include "prm33xx.h"
-#include "prm-regbits-33xx.h"
-
-
-static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
- am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
- (pwrst << OMAP_POWERSTATE_SHIFT),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- return 0;
-}
-
-static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- v &= OMAP_POWERSTATE_MASK;
- v >>= OMAP_POWERSTATE_SHIFT;
-
- return v;
-}
-
-static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- v &= OMAP_POWERSTATEST_MASK;
- v >>= OMAP_POWERSTATEST_SHIFT;
-
- return v;
-}
-
-static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
- v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
-
- return v;
-}
-
-static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
-{
- am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
- (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- return 0;
-}
-
-static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
- am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
- AM33XX_LASTPOWERSTATEENTERED_MASK,
- pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- return 0;
-}
-
-static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
- u32 m;
-
- m = pwrdm->logicretstate_mask;
- if (!m)
- return -EINVAL;
-
- am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-
- return 0;
-}
-
-static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- v &= AM33XX_LOGICSTATEST_MASK;
- v >>= AM33XX_LOGICSTATEST_SHIFT;
-
- return v;
-}
-
-static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
- u32 v, m;
-
- m = pwrdm->logicretstate_mask;
- if (!m)
- return -EINVAL;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = pwrdm->mem_on_mask[bank];
- if (!m)
- return -EINVAL;
-
- am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-
- return 0;
-}
-
-static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = pwrdm->mem_ret_mask[bank];
- if (!m)
- return -EINVAL;
-
- am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-
- return 0;
-}
-
-static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m, v;
-
- m = pwrdm->mem_pwrst_mask[bank];
- if (!m)
- return -EINVAL;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m, v;
-
- m = pwrdm->mem_retst_mask[bank];
- if (!m)
- return -EINVAL;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
- u32 c = 0;
-
- /*
- * REVISIT: pwrdm_wait_transition() may be better implemented
- * via a callback and a periodic timer check -- how long do we expect
- * powerdomain transitions to take?
- */
-
- /* XXX Is this udelay() value meaningful? */
- while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
- & OMAP_INTRANSITION_MASK) &&
- (c++ < PWRDM_TRANSITION_BAILOUT))
- udelay(1);
-
- if (c > PWRDM_TRANSITION_BAILOUT) {
- pr_err("powerdomain: %s: waited too long to complete transition\n",
- pwrdm->name);
- return -EAGAIN;
- }
-
- pr_debug("powerdomain: completed transition in %d loops\n", c);
-
- return 0;
-}
-
-struct pwrdm_ops am33xx_pwrdm_operations = {
- .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst,
- .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst,
- .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst,
- .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst,
- .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst,
- .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst,
- .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst,
- .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst,
- .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange,
- .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst,
- .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst,
- .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst,
- .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst,
- .pwrdm_wait_transition = am33xx_pwrdm_wait_transition,
-};
+++ /dev/null
-/*
- * OMAP4 powerdomain control
- *
- * Copyright (C) 2009-2010, 2012 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/bug.h>
-
-#include "powerdomain.h"
-#include <plat/prcm.h>
-#include "prm2xxx_3xxx.h"
-#include "prm44xx.h"
-#include "prminst44xx.h"
-#include "prm-regbits-44xx.h"
-
-static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
- omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK,
- (pwrst << OMAP_POWERSTATE_SHIFT),
- pwrdm->prcm_partition,
- pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
- v &= OMAP_POWERSTATE_MASK;
- v >>= OMAP_POWERSTATE_SHIFT;
-
- return v;
-}
-
-static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTST);
- v &= OMAP_POWERSTATEST_MASK;
- v >>= OMAP_POWERSTATEST_SHIFT;
-
- return v;
-}
-
-static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTST);
- v &= OMAP4430_LASTPOWERSTATEENTERED_MASK;
- v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT;
-
- return v;
-}
-
-static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
-{
- omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
- (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
- pwrdm->prcm_partition,
- pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
- omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK,
- OMAP4430_LASTPOWERSTATEENTERED_MASK,
- pwrdm->prcm_partition,
- pwrdm->prcm_offs, OMAP4_PM_PWSTST);
- return 0;
-}
-
-static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
- u32 v;
-
- v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK);
- omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v,
- pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
-
- omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
- omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTST);
- v &= OMAP4430_LOGICSTATEST_MASK;
- v >>= OMAP4430_LOGICSTATEST_SHIFT;
-
- return v;
-}
-
-static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
- v &= OMAP4430_LOGICRETSTATE_MASK;
- v >>= OMAP4430_LOGICRETSTATE_SHIFT;
-
- return v;
-}
-
-/**
- * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate
- * @pwrdm: struct powerdomain * to read the state for
- *
- * Reads the previous logic powerstate for a powerdomain. This
- * function must determine the previous logic powerstate by first
- * checking the previous powerstate for the domain. If that was OFF,
- * then logic has been lost. If previous state was RETENTION, the
- * function reads the setting for the next retention logic state to
- * see the actual value. In every other case, the logic is
- * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
- * depending whether the logic was retained or not.
- */
-static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
-{
- int state;
-
- state = omap4_pwrdm_read_prev_pwrst(pwrdm);
-
- if (state == PWRDM_POWER_OFF)
- return PWRDM_POWER_OFF;
-
- if (state != PWRDM_POWER_RET)
- return PWRDM_POWER_RET;
-
- return omap4_pwrdm_read_logic_retst(pwrdm);
-}
-
-static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m, v;
-
- m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTST);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m, v;
-
- m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-/**
- * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate
- * @pwrdm: struct powerdomain * to read mem powerstate for
- * @bank: memory bank index
- *
- * Reads the previous memory powerstate for a powerdomain. This
- * function must determine the previous memory powerstate by first
- * checking the previous powerstate for the domain. If that was OFF,
- * then logic has been lost. If previous state was RETENTION, the
- * function reads the setting for the next memory retention state to
- * see the actual value. In every other case, the logic is
- * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
- * depending whether logic was retained or not.
- */
-static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- int state;
-
- state = omap4_pwrdm_read_prev_pwrst(pwrdm);
-
- if (state == PWRDM_POWER_OFF)
- return PWRDM_POWER_OFF;
-
- if (state != PWRDM_POWER_RET)
- return PWRDM_POWER_RET;
-
- return omap4_pwrdm_read_mem_retst(pwrdm, bank);
-}
-
-static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
- u32 c = 0;
-
- /*
- * REVISIT: pwrdm_wait_transition() may be better implemented
- * via a callback and a periodic timer check -- how long do we expect
- * powerdomain transitions to take?
- */
-
- /* XXX Is this udelay() value meaningful? */
- while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition,
- pwrdm->prcm_offs,
- OMAP4_PM_PWSTST) &
- OMAP_INTRANSITION_MASK) &&
- (c++ < PWRDM_TRANSITION_BAILOUT))
- udelay(1);
-
- if (c > PWRDM_TRANSITION_BAILOUT) {
- pr_err("powerdomain: %s: waited too long to complete transition\n",
- pwrdm->name);
- return -EAGAIN;
- }
-
- pr_debug("powerdomain: completed transition in %d loops\n", c);
-
- return 0;
-}
-
-struct pwrdm_ops omap4_pwrdm_operations = {
- .pwrdm_set_next_pwrst = omap4_pwrdm_set_next_pwrst,
- .pwrdm_read_next_pwrst = omap4_pwrdm_read_next_pwrst,
- .pwrdm_read_pwrst = omap4_pwrdm_read_pwrst,
- .pwrdm_read_prev_pwrst = omap4_pwrdm_read_prev_pwrst,
- .pwrdm_set_lowpwrstchange = omap4_pwrdm_set_lowpwrstchange,
- .pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst,
- .pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst,
- .pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst,
- .pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst,
- .pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst,
- .pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst,
- .pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst,
- .pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst,
- .pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst,
- .pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst,
- .pwrdm_wait_transition = omap4_pwrdm_wait_transition,
-};
#include <linux/kernel.h>
#include <linux/init.h>
+#include "soc.h"
#include "powerdomain.h"
#include "powerdomains2xxx_3xxx_data.h"
#define OMAP3430_EN_CORE_MASK (1 << 0)
-/*
- * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
- * submodule to exit hardreset
- */
-#define MAX_MODULE_HARDRESET_WAIT 10000
/*
* Maximum time(us) it takes to output the signal WUCLKOUT of the last
* microseconds on OMAP4, so this timeout may be too high.
*/
#define MAX_IOPAD_LATCH_TIME 100
-
# ifndef __ASSEMBLER__
-extern void __iomem *prm_base;
-extern void __iomem *cm_base;
-extern void __iomem *cm2_base;
-extern void __iomem *prcm_mpu_base;
-
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
-extern void omap_prm_base_init(void);
-extern void omap_cm_base_init(void);
-#else
-static inline void omap_prm_base_init(void)
-{
-}
-static inline void omap_cm_base_init(void)
-{
-}
-#endif
/**
* struct omap_prcm_irq - describes a PRCM interrupt bit
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap2/prcm.c
- *
- * OMAP 24xx Power Reset and Clock Management (PRCM) functions
- *
- * Copyright (C) 2005 Nokia Corporation
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- *
- * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc.
- * Upgraded with OMAP4 support by Abhijit Pagare <abhijitpagare@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-
-#include "common.h"
-#include <plat/prcm.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm44xx.h"
-#include "prminst44xx.h"
-#include "cminst44xx.h"
-#include "prm-regbits-24xx.h"
-#include "prm-regbits-44xx.h"
-#include "control.h"
-
-void __iomem *prm_base;
-void __iomem *cm_base;
-void __iomem *cm2_base;
-void __iomem *prcm_mpu_base;
-
-#define MAX_MODULE_ENABLE_WAIT 100000
-
-u32 omap_prcm_get_reset_sources(void)
-{
- /* XXX This presumably needs modification for 34XX */
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- return omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f;
- if (cpu_is_omap44xx())
- return omap2_prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f;
-
- return 0;
-}
-EXPORT_SYMBOL(omap_prcm_get_reset_sources);
-
-/* Resets clock rates and reboots the system. Only called from system.h */
-void omap_prcm_restart(char mode, const char *cmd)
-{
- s16 prcm_offs = 0;
-
- if (cpu_is_omap24xx()) {
- omap2xxx_clk_prepare_for_reboot();
-
- prcm_offs = WKUP_MOD;
- } else if (cpu_is_omap34xx()) {
- prcm_offs = OMAP3430_GR_MOD;
- omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
- } else if (cpu_is_omap44xx()) {
- omap4_prminst_global_warm_sw_reset(); /* never returns */
- } else {
- WARN_ON(1);
- }
-
- /*
- * As per Errata i520, in some cases, user will not be able to
- * access DDR memory after warm-reset.
- * This situation occurs while the warm-reset happens during a read
- * access to DDR memory. In that particular condition, DDR memory
- * does not respond to a corrupted read command due to the warm
- * reset occurrence but SDRC is waiting for read completion.
- * SDRC is not sensitive to the warm reset, but the interconnect is
- * reset on the fly, thus causing a misalignment between SDRC logic,
- * interconnect logic and DDR memory state.
- * WORKAROUND:
- * Steps to perform before a Warm reset is trigged:
- * 1. enable self-refresh on idle request
- * 2. put SDRC in idle
- * 3. wait until SDRC goes to idle
- * 4. generate SW reset (Global SW reset)
- *
- * Steps to be performed after warm reset occurs (in bootloader):
- * if HW warm reset is the source, apply below steps before any
- * accesses to SDRAM:
- * 1. Reset SMS and SDRC and wait till reset is complete
- * 2. Re-initialize SMS, SDRC and memory
- *
- * NOTE: Above work around is required only if arch reset is implemented
- * using Global SW reset(GLOBAL_SW_RST). DPLL3 reset does not need
- * the WA since it resets SDRC as well as part of cold reset.
- */
-
- /* XXX should be moved to some OMAP2/3 specific code */
- omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
- OMAP2_RM_RSTCTRL);
- omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */
-}
-
-/**
- * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
- * @reg: physical address of module IDLEST register
- * @mask: value to mask against to determine if the module is active
- * @idlest: idle state indicator (0 or 1) for the clock
- * @name: name of the clock (for printk)
- *
- * Returns 1 if the module indicated readiness in time, or 0 if it
- * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
- *
- * XXX This function is deprecated. It should be removed once the
- * hwmod conversion is complete.
- */
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
- const char *name)
-{
- int i = 0;
- int ena = 0;
-
- if (idlest)
- ena = 0;
- else
- ena = mask;
-
- /* Wait for lock */
- omap_test_timeout(((__raw_readl(reg) & mask) == ena),
- MAX_MODULE_ENABLE_WAIT, i);
-
- if (i < MAX_MODULE_ENABLE_WAIT)
- pr_debug("cm: Module associated with clock %s ready after %d loops\n",
- name, i);
- else
- pr_err("cm: Module associated with clock %s didn't enable in %d tries\n",
- name, MAX_MODULE_ENABLE_WAIT);
-
- return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
-};
-
-void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
-{
- if (omap2_globals->prm)
- prm_base = omap2_globals->prm;
- if (omap2_globals->cm)
- cm_base = omap2_globals->cm;
- if (omap2_globals->cm2)
- cm2_base = omap2_globals->cm2;
- if (omap2_globals->prcm_mpu)
- prcm_mpu_base = omap2_globals->prcm_mpu;
-
- if (cpu_is_omap44xx() || soc_is_omap54xx()) {
- omap_prm_base_init();
- omap_cm_base_init();
- }
-}
-
-/*
- * Stubbed functions so that common files continue to build when
- * custom builds are used
- * XXX These are temporary and should be removed at the earliest possible
- * opportunity
- */
-int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
-{
- return 0;
-}
-
-void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
- s16 cdoffs, u16 clkctrl_offs)
-{
-}
-
-void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
-{
-}
#include "prcm_mpu44xx.h"
#include "cm-regbits-44xx.h"
+/*
+ * prcm_mpu_base: the virtual address of the start of the PRCM_MPU IP
+ * block registers
+ */
+void __iomem *prcm_mpu_base;
+
/* PRCM_MPU low-level functions */
u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg)
return v;
}
+
+/**
+ * omap2_set_globals_prcm_mpu - set the MPU PRCM base address (for early use)
+ * @prcm_mpu: PRCM_MPU base virtual address
+ *
+ * XXX Will be replaced when the PRM/CM drivers are completed.
+ */
+void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu)
+{
+ prcm_mpu_base = prcm_mpu;
+}
/*
* OMAP44xx PRCM MPU instance offset macros
*
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010, 2012 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
*
* Paul Walmsley (paul@pwsan.com)
#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H
#define __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H
+#include "common.h"
+
+# ifndef __ASSEMBLER__
+extern void __iomem *prcm_mpu_base;
+# endif
+
#define OMAP4430_PRCM_MPU_BASE 0x48243000
#define OMAP44XX_PRCM_MPU_REGADDR(inst, reg) \
extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx);
extern u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst,
s16 idx);
+extern void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu);
# endif
#endif
* published by the Free Software Foundation.
*/
-#include "prm2xxx_3xxx.h"
+#include "prm2xxx.h"
/* Bits shared between registers */
/* RM_RSTST_WKUP specific bits */
/* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
+#define OMAP24XX_EXTWMPU_RST_SHIFT 6
#define OMAP24XX_EXTWMPU_RST_MASK (1 << 6)
+#define OMAP24XX_SECU_WD_RST_SHIFT 5
#define OMAP24XX_SECU_WD_RST_MASK (1 << 5)
+#define OMAP24XX_MPU_WD_RST_SHIFT 4
#define OMAP24XX_MPU_WD_RST_MASK (1 << 4)
+#define OMAP24XX_SECU_VIOL_RST_SHIFT 3
#define OMAP24XX_SECU_VIOL_RST_MASK (1 << 3)
/* PM_WKEN_WKUP specific bits */
#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
-#include "prm2xxx_3xxx.h"
+#include "prm3xxx.h"
/* Shared register bits */
#define OMAP3430_RSTTIME1_MASK (0xff << 0)
/* PRM_RSTST */
+#define OMAP3430_ICECRUSHER_RST_SHIFT 10
#define OMAP3430_ICECRUSHER_RST_MASK (1 << 10)
+#define OMAP3430_ICEPICK_RST_SHIFT 9
#define OMAP3430_ICEPICK_RST_MASK (1 << 9)
+#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT 8
#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK (1 << 8)
+#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT 7
#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK (1 << 7)
+#define OMAP3430_EXTERNAL_WARM_RST_SHIFT 6
#define OMAP3430_EXTERNAL_WARM_RST_MASK (1 << 6)
+#define OMAP3430_SECURE_WD_RST_SHIFT 5
#define OMAP3430_SECURE_WD_RST_MASK (1 << 5)
+#define OMAP3430_MPU_WD_RST_SHIFT 4
#define OMAP3430_MPU_WD_RST_MASK (1 << 4)
+#define OMAP3430_SECURITY_VIOL_RST_SHIFT 3
#define OMAP3430_SECURITY_VIOL_RST_MASK (1 << 3)
+#define OMAP3430_GLOBAL_SW_RST_SHIFT 1
#define OMAP3430_GLOBAL_SW_RST_MASK (1 << 1)
+#define OMAP3430_GLOBAL_COLD_RST_SHIFT 0
#define OMAP3430_GLOBAL_COLD_RST_MASK (1 << 0)
/* PRM_VOLTCTRL */
/*
* OMAP2/3/4 Power/Reset Management (PRM) bitfield definitions
*
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
*
* Paul Walmsley
#include "prcm-common.h"
+# ifndef __ASSEMBLER__
+extern void __iomem *prm_base;
+extern void omap2_set_globals_prm(void __iomem *prm);
+# endif
+
+
+/*
+ * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP
+ * module to softreset
+ */
+#define MAX_MODULE_SOFTRESET_WAIT 10000
+
+/*
+ * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
+ * submodule to exit hardreset
+ */
+#define MAX_MODULE_HARDRESET_WAIT 10000
+
+/*
+ * Register bitfields
+ */
+
/*
* 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP
*
#define OMAP_POWERSTATE_SHIFT 0
#define OMAP_POWERSTATE_MASK (0x3 << 0)
+/*
+ * Standardized OMAP reset source bits
+ *
+ * To the extent these happen to match the hardware register bit
+ * shifts, it's purely coincidental. Used by omap-wdt.c.
+ * OMAP_UNKNOWN_RST_SRC_ID_SHIFT is a special value, used whenever
+ * there are any bits remaining in the global PRM_RSTST register that
+ * haven't been identified, or when the PRM code for the current SoC
+ * doesn't know how to interpret the register.
+ */
+#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0
+#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1
+#define OMAP_SECU_VIOL_RST_SRC_ID_SHIFT 2
+#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3
+#define OMAP_SECU_WD_RST_SRC_ID_SHIFT 4
+#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5
+#define OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT 6
+#define OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT 7
+#define OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT 8
+#define OMAP_ICEPICK_RST_SRC_ID_SHIFT 9
+#define OMAP_ICECRUSHER_RST_SRC_ID_SHIFT 10
+#define OMAP_C2C_RST_SRC_ID_SHIFT 11
+#define OMAP_UNKNOWN_RST_SRC_ID_SHIFT 12
+
+#ifndef __ASSEMBLER__
+
+/**
+ * struct prm_reset_src_map - map register bitshifts to standard bitshifts
+ * @reg_shift: bitshift in the PRM reset source register
+ * @std_shift: bitshift equivalent in the standard reset source list
+ *
+ * The fields are signed because -1 is used as a terminator.
+ */
+struct prm_reset_src_map {
+ s8 reg_shift;
+ s8 std_shift;
+};
+
+/**
+ * struct prm_ll_data - fn ptrs to per-SoC PRM function implementations
+ * @read_reset_sources: ptr to the Soc PRM-specific get_reset_source impl
+ */
+struct prm_ll_data {
+ u32 (*read_reset_sources)(void);
+};
+
+extern int prm_register(struct prm_ll_data *pld);
+extern int prm_unregister(struct prm_ll_data *pld);
+
+extern u32 prm_read_reset_sources(void);
+
+#endif
+
#endif
--- /dev/null
+/*
+ * OMAP2xxx PRM module functions
+ *
+ * Copyright (C) 2010-2012 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include "common.h"
+#include <plat/cpu.h>
+
+#include "vp.h"
+#include "powerdomain.h"
+#include "clockdomain.h"
+#include "prm2xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP
+ * hardware register (which are specific to the OMAP2xxx SoCs) to
+ * reset source ID bit shifts (which is an OMAP SoC-independent
+ * enumeration)
+ */
+static struct prm_reset_src_map omap2xxx_prm_reset_src_map[] = {
+ { OMAP_GLOBALCOLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
+ { OMAP_GLOBALWARM_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
+ { OMAP24XX_SECU_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
+ { OMAP24XX_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+ { OMAP24XX_SECU_WD_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT },
+ { OMAP24XX_EXTWMPU_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
+ { -1, -1 },
+};
+
+/**
+ * omap2xxx_prm_read_reset_sources - return the last SoC reset source
+ *
+ * Return a u32 representing the last reset sources of the SoC. The
+ * returned reset source bits are standardized across OMAP SoCs.
+ */
+static u32 omap2xxx_prm_read_reset_sources(void)
+{
+ struct prm_reset_src_map *p;
+ u32 r = 0;
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
+
+ p = omap2xxx_prm_reset_src_map;
+ while (p->reg_shift >= 0 && p->std_shift >= 0) {
+ if (v & (1 << p->reg_shift))
+ r |= 1 << p->std_shift;
+ p++;
+ }
+
+ return r;
+}
+
+/**
+ * omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC
+ *
+ * Set the DPLL reset bit, which should reboot the SoC. This is the
+ * recommended way to restart the SoC. No return value.
+ */
+void omap2xxx_prm_dpll_reset(void)
+{
+ omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, WKUP_MOD,
+ OMAP2_RM_RSTCTRL);
+ /* OCP barrier */
+ omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL);
+}
+
+int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
+{
+ omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
+ clkdm->pwrdm.ptr->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+ return 0;
+}
+
+int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ omap2_prm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
+ clkdm->pwrdm.ptr->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+ return 0;
+}
+
+struct pwrdm_ops omap2_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
+ .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
+ .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
+ .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
+ .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
+};
+
+/*
+ *
+ */
+
+static struct prm_ll_data omap2xxx_prm_ll_data = {
+ .read_reset_sources = &omap2xxx_prm_read_reset_sources,
+};
+
+static int __init omap2xxx_prm_init(void)
+{
+ if (!cpu_is_omap24xx())
+ return 0;
+
+ return prm_register(&omap2xxx_prm_ll_data);
+}
+subsys_initcall(omap2xxx_prm_init);
+
+static void __exit omap2xxx_prm_exit(void)
+{
+ if (!cpu_is_omap24xx())
+ return;
+
+ /* Should never happen */
+ WARN(prm_unregister(&omap2xxx_prm_ll_data),
+ "%s: prm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap2xxx_prm_exit);
--- /dev/null
+/*
+ * OMAP2xxx Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The PRM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The PRM on OMAP4 has a new register layout, and is handled
+ * in a separate file.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm2xxx_3xxx.h"
+
+#define OMAP2420_PRM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+#define OMAP2430_PRM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+
+/*
+ * OMAP2-specific global PRM registers
+ * Use __raw_{read,write}l() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
+ * bits.)
+ *
+ */
+
+#define OMAP2_PRCM_REVISION_OFFSET 0x0000
+#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
+#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
+#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
+#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
+#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
+#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
+#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+/*
+ * Module specific PRM register offsets from PRM_BASE + domain offset
+ *
+ * Use prm_{read,write}_mod_reg() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the
+ * IRQSTATUS and IRQENABLE bits.)
+ */
+
+/* Register offsets appearing on both OMAP2 and OMAP3 */
+
+#define OMAP2_RM_RSTCTRL 0x0050
+#define OMAP2_RM_RSTTIME 0x0054
+#define OMAP2_RM_RSTST 0x0058
+#define OMAP2_PM_PWSTCTRL 0x00e0
+#define OMAP2_PM_PWSTST 0x00e4
+
+#define PM_WKEN 0x00a0
+#define PM_WKEN1 PM_WKEN
+#define PM_WKST 0x00b0
+#define PM_WKST1 PM_WKST
+#define PM_WKDEP 0x00c8
+#define PM_EVGENCTRL 0x00d4
+#define PM_EVGENONTIM 0x00d8
+#define PM_EVGENOFFTIM 0x00dc
+
+/* OMAP2xxx specific register offsets */
+#define OMAP24XX_PM_WKEN2 0x00a4
+#define OMAP24XX_PM_WKST2 0x00b4
+
+#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
+#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
+#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
+#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
+
+#ifndef __ASSEMBLER__
+/* Function prototypes */
+extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
+extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
+
+extern void omap2xxx_prm_dpll_reset(void);
+
+extern int __init prm2xxx_init(void);
+extern int __exit prm2xxx_exit(void);
+
+#endif
+
+#endif
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/irq.h>
-#include <plat/prcm.h>
-
-#include "soc.h"
#include "common.h"
-#include "vp.h"
-
+#include "powerdomain.h"
#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
-#include "prm-regbits-34xx.h"
-
-static const struct omap_prcm_irq omap3_prcm_irqs[] = {
- OMAP_PRCM_IRQ("wkup", 0, 0),
- OMAP_PRCM_IRQ("io", 9, 1),
-};
-
-static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
- .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
- .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
- .nr_regs = 1,
- .irqs = omap3_prcm_irqs,
- .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
- .irq = 11 + OMAP_INTC_START,
- .read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
- .ocp_barrier = &omap3xxx_prm_ocp_barrier,
- .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
- .restore_irqen = &omap3xxx_prm_restore_irqen,
-};
-
-u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
-{
- return __raw_readl(prm_base + module + idx);
-}
-
-void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
- __raw_writel(val, prm_base + module + idx);
-}
-
-/* Read-modify-write a register in a PRM module. Caller must lock */
-u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
- u32 v;
-
- v = omap2_prm_read_mod_reg(module, idx);
- v &= ~mask;
- v |= bits;
- omap2_prm_write_mod_reg(v, module, idx);
-
- return v;
-}
-
-/* Read a PRM register, AND it, and shift the result down to bit 0 */
-u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
- u32 v;
-
- v = omap2_prm_read_mod_reg(domain, idx);
- v &= mask;
- v >>= __ffs(mask);
-
- return v;
-}
-
-u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
+#include "clockdomain.h"
/**
* omap2_prm_is_hardreset_asserted - read the HW reset line state of
*/
int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
{
- if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
- return -EINVAL;
-
return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
(1 << shift));
}
{
u32 mask;
- if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
- return -EINVAL;
-
mask = 1 << shift;
omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
u32 rst, st;
int c;
- if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
- return -EINVAL;
-
rst = 1 << rst_shift;
st = 1 << st_shift;
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
-/* PRM VP */
-
-/*
- * struct omap3_vp - OMAP3 VP register access description.
- * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
- */
-struct omap3_vp {
- u32 tranxdone_status;
-};
-
-static struct omap3_vp omap3_vp[] = {
- [OMAP3_VP_VDD_MPU_ID] = {
- .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
- },
- [OMAP3_VP_VDD_CORE_ID] = {
- .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
- },
-};
-
-#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
-
-u32 omap3_prm_vp_check_txdone(u8 vp_id)
-{
- struct omap3_vp *vp = &omap3_vp[vp_id];
- u32 irqstatus;
- irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- return irqstatus & vp->tranxdone_status;
-}
+/* Powerdomain low-level functions */
-void omap3_prm_vp_clear_txdone(u8 vp_id)
+/* Common functions across OMAP2 and OMAP3 */
+int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
- struct omap3_vp *vp = &omap3_vp[vp_id];
-
- omap2_prm_write_mod_reg(vp->tranxdone_status,
- OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
+ (pwrst << OMAP_POWERSTATE_SHIFT),
+ pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+ return 0;
}
-u32 omap3_prm_vcvp_read(u8 offset)
+int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
{
- return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL,
+ OMAP_POWERSTATE_MASK);
}
-void omap3_prm_vcvp_write(u32 val, u8 offset)
+int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
- omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTST,
+ OMAP_POWERSTATEST_MASK);
}
-u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
{
- return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
+
+ omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+
+ return 0;
}
-/**
- * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
- * @events: ptr to a u32, preallocated by caller
- *
- * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
- * MPU IRQs, and store the result into the u32 pointed to by @events.
- * No return value.
- */
-void omap3xxx_prm_read_pending_irqs(unsigned long *events)
+int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
{
- u32 mask, st;
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
- /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
- mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
- st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
- events[0] = mask & st;
+ return 0;
}
-/**
- * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
- *
- * Force any buffered writes to the PRM IP block to complete. Needed
- * by the PRM IRQ handler, which reads and writes directly to the IP
- * block, to avoid race conditions after acknowledging or clearing IRQ
- * bits. No return value.
- */
-void omap3xxx_prm_ocp_barrier(void)
+int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
- omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
+
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
+ m);
}
-/**
- * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
- * @saved_mask: ptr to a u32 array to save IRQENABLE bits
- *
- * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
- * must be allocated by the caller. Intended to be used in the PRM
- * interrupt handler suspend callback. The OCP barrier is needed to
- * ensure the write to disable PRM interrupts reaches the PRM before
- * returning; otherwise, spurious interrupts might occur. No return
- * value.
- */
-void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
+int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
{
- saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQENABLE_MPU_OFFSET);
- omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
- /* OCP barrier */
- omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL, m);
}
-/**
- * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
- * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
- *
- * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
- * to be used in the PRM interrupt handler resume callback to restore
- * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
- * barrier should be needed here; any pending PRM interrupts will fire
- * once the writes reach the PRM. No return value.
- */
-void omap3xxx_prm_restore_irqen(u32 *saved_mask)
+int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
{
- omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
- OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ u32 v;
+
+ v = pwrst << __ffs(OMAP_LOGICRETSTATE_MASK);
+ omap2_prm_rmw_mod_reg_bits(OMAP_LOGICRETSTATE_MASK, v, pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+
+ return 0;
}
-/**
- * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
- *
- * Clear any previously-latched I/O wakeup events and ensure that the
- * I/O wakeup gates are aligned with the current mux settings. Works
- * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
- * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
- * return value.
- */
-void omap3xxx_prm_reconfigure_io_chain(void)
+int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
{
- int i = 0;
+ u32 c = 0;
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
- omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
- OMAP3430_ST_IO_CHAIN_MASK,
- MAX_IOPAD_LATCH_TIME, i);
- if (i == MAX_IOPAD_LATCH_TIME)
- pr_warn("PRM: I/O chain clock line assertion timed out\n");
+ /* XXX Is this udelay() value meaningful? */
+ while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
+ OMAP_INTRANSITION_MASK) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
- omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
+ if (c > PWRDM_TRANSITION_BAILOUT) {
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
+ return -EAGAIN;
+ }
- omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKST);
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
- omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
+ return 0;
}
-/**
- * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
- *
- * Activates the I/O wakeup event latches and allows events logged by
- * those latches to signal a wakeup event to the PRCM. For I/O
- * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
- * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
- * No return value.
- */
-static void __init omap3xxx_prm_enable_io_wakeup(void)
+int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+ return 0;
+}
+
+int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+ return 0;
+}
+
+int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
{
- if (omap3_has_io_wakeup())
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
- PM_WKEN);
+ return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
+ PM_WKDEP, (1 << clkdm2->dep_bit));
}
-static int __init omap3xxx_prcm_init(void)
+int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
{
- int ret = 0;
-
- if (cpu_is_omap34xx()) {
- omap3xxx_prm_enable_io_wakeup();
- ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
- if (!ret)
- irq_set_status_flags(omap_prcm_event_to_irq("io"),
- IRQ_NOAUTOEN);
+ struct clkdm_dep *cd;
+ u32 mask = 0;
+
+ for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
+ if (!cd->clkdm)
+ continue; /* only happens if data is erroneous */
+
+ /* PRM accesses are slow, so minimize them */
+ mask |= 1 << cd->clkdm->dep_bit;
+ atomic_set(&cd->wkdep_usecount, 0);
}
- return ret;
+ omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
+ PM_WKDEP);
+ return 0;
}
-subsys_initcall(omap3xxx_prcm_init);
+
/*
- * OMAP2/3 Power/Reset Management (PRM) register definitions
+ * OMAP2xxx/3xxx-common Power/Reset Management (PRM) register definitions
*
- * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
* Paul Walmsley
*
#include "prcm-common.h"
#include "prm.h"
-#define OMAP2420_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
-#define OMAP2430_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
-#define OMAP34XX_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-
-
-/*
- * OMAP2-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
- * bits.)
- *
- */
-
-#define OMAP2_PRCM_REVISION_OFFSET 0x0000
-#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
-#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
-#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
-#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
-#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
-#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
-#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
-#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
-#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
-#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
-#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
-#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
-#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
-#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
-
-/*
- * OMAP3-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE
- * bits.)
- */
-
-#define OMAP3_PRM_REVISION_OFFSET 0x0004
-#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
-#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
-#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
-#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
-#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
-#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
-#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
-#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
-#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
-#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
-#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
-#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
-#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
-#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3_PRM_RSTST_OFFSET 0x0058
-#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
-#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
-#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
-#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
-#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
-#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
-#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
-#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
-#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
-#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
-#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
-#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
-#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
-#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
-#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
-#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
-#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
-#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
-#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
-#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
-#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
-#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
-#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
-
/*
* Module specific PRM register offsets from PRM_BASE + domain offset
*
#define PM_EVGENONTIM 0x00d8
#define PM_EVGENOFFTIM 0x00dc
-/* OMAP2xxx specific register offsets */
-#define OMAP24XX_PM_WKEN2 0x00a4
-#define OMAP24XX_PM_WKST2 0x00b4
-
-#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
-#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
-#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
-#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
-/* OMAP3 specific register offsets */
-#define OMAP3430ES2_PM_WKEN3 0x00f0
-#define OMAP3430ES2_PM_WKST3 0x00b8
-
-#define OMAP3430_PM_MPUGRPSEL 0x00a4
-#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
-#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
-
-#define OMAP3430_PM_IVAGRPSEL 0x00a8
-#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
-#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
-
-#define OMAP3430_PM_PREPWSTST 0x00e8
-
-#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
-#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#include "powerdomain.h"
-#ifndef __ASSEMBLER__
/* Power/reset management domain register get/set */
-extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
-extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
+static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+ return __raw_readl(prm_base + module + idx);
+}
+
+static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+ __raw_writel(val, prm_base + module + idx);
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module,
+ s16 idx)
+{
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(module, idx);
+ v &= ~mask;
+ v |= bits;
+ omap2_prm_write_mod_reg(v, module, idx);
+
+ return v;
+}
+
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(domain, idx);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
+static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
+
+static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
/* These omap2_ PRM functions apply to both OMAP2 and 3 */
extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
-/* OMAP3-specific VP functions */
-u32 omap3_prm_vp_check_txdone(u8 vp_id);
-void omap3_prm_vp_clear_txdone(u8 vp_id);
-
-/*
- * OMAP3 access functions for voltage controller (VC) and
- * voltage proccessor (VP) in the PRM.
- */
-extern u32 omap3_prm_vcvp_read(u8 offset);
-extern void omap3_prm_vcvp_write(u32 val, u8 offset);
-extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
-
-extern void omap3xxx_prm_reconfigure_io_chain(void);
-
-/* PRM interrupt-related functions */
-extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
-extern void omap3xxx_prm_ocp_barrier(void);
-extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
-extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
+extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+extern int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm);
+extern int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst);
+extern int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst);
+extern int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+extern int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
+extern int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
+extern int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm);
+
+extern int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2);
+extern int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2);
+extern int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2);
+extern int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm);
#endif /* __ASSEMBLER */
*
* 3430: RM_RSTST_CORE, RM_RSTST_EMU
*/
+#define OMAP_GLOBALWARM_RST_SHIFT 1
#define OMAP_GLOBALWARM_RST_MASK (1 << 1)
+#define OMAP_GLOBALCOLD_RST_SHIFT 0
#define OMAP_GLOBALCOLD_RST_MASK (1 << 0)
/*
#define OMAP_LOGICRETSTATE_MASK (1 << 2)
-/*
- * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
- * submodule to exit hardreset
- */
-#define MAX_MODULE_HARDRESET_WAIT 10000
-
-
#endif
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
-
#include "common.h"
+#include "powerdomain.h"
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
+
+static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
+ (pwrst << OMAP_POWERSTATE_SHIFT),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= OMAP_POWERSTATE_MASK;
+ v >>= OMAP_POWERSTATE_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= OMAP_POWERSTATEST_MASK;
+ v >>= OMAP_POWERSTATEST_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
+ v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+ am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
+ (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+ am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
+ AM33XX_LASTPOWERSTATEENTERED_MASK,
+ pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->logicretstate_mask;
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= AM33XX_LOGICSTATEST_MASK;
+ v >>= AM33XX_LOGICSTATEST_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+ u32 v, m;
+
+ m = pwrdm->logicretstate_mask;
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->mem_on_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->mem_ret_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = pwrdm->mem_pwrst_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = pwrdm->mem_retst_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+ u32 c = 0;
+
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
+
+ /* XXX Is this udelay() value meaningful? */
+ while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
+ & OMAP_INTRANSITION_MASK) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
+
+ if (c > PWRDM_TRANSITION_BAILOUT) {
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
+ return -EAGAIN;
+ }
+
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+ return 0;
+}
+
+struct pwrdm_ops am33xx_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst,
+ .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst,
+ .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst,
+ .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst,
+ .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst,
+ .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst,
+ .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange,
+ .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst,
+ .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst,
+ .pwrdm_wait_transition = am33xx_pwrdm_wait_transition,
+};
--- /dev/null
+/*
+ * OMAP3xxx PRM module functions
+ *
+ * Copyright (C) 2010-2012 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include "common.h"
+#include <plat/cpu.h>
+
+#include "vp.h"
+#include "powerdomain.h"
+#include "prm3xxx.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "prm-regbits-34xx.h"
+
+static const struct omap_prcm_irq omap3_prcm_irqs[] = {
+ OMAP_PRCM_IRQ("wkup", 0, 0),
+ OMAP_PRCM_IRQ("io", 9, 1),
+};
+
+static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
+ .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
+ .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
+ .nr_regs = 1,
+ .irqs = omap3_prcm_irqs,
+ .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
+ .irq = 11 + OMAP_INTC_START,
+ .read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
+ .ocp_barrier = &omap3xxx_prm_ocp_barrier,
+ .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
+ .restore_irqen = &omap3xxx_prm_restore_irqen,
+};
+
+/*
+ * omap3_prm_reset_src_map - map from bits in the PRM_RSTST hardware
+ * register (which are specific to OMAP3xxx SoCs) to reset source ID
+ * bit shifts (which is an OMAP SoC-independent enumeration)
+ */
+static struct prm_reset_src_map omap3xxx_prm_reset_src_map[] = {
+ { OMAP3430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
+ { OMAP3430_GLOBAL_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
+ { OMAP3430_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
+ { OMAP3430_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+ { OMAP3430_SECURE_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+ { OMAP3430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
+ { OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT,
+ OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
+ { OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT,
+ OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
+ { OMAP3430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
+ { OMAP3430_ICECRUSHER_RST_SHIFT, OMAP_ICECRUSHER_RST_SRC_ID_SHIFT },
+ { -1, -1 },
+};
+
+/* PRM VP */
+
+/*
+ * struct omap3_vp - OMAP3 VP register access description.
+ * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
+ */
+struct omap3_vp {
+ u32 tranxdone_status;
+};
+
+static struct omap3_vp omap3_vp[] = {
+ [OMAP3_VP_VDD_MPU_ID] = {
+ .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
+ },
+ [OMAP3_VP_VDD_CORE_ID] = {
+ .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
+ },
+};
+
+#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
+
+u32 omap3_prm_vp_check_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+ u32 irqstatus;
+
+ irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ return irqstatus & vp->tranxdone_status;
+}
+
+void omap3_prm_vp_clear_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+
+ omap2_prm_write_mod_reg(vp->tranxdone_status,
+ OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+}
+
+u32 omap3_prm_vcvp_read(u8 offset)
+{
+ return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
+}
+
+void omap3_prm_vcvp_write(u32 val, u8 offset)
+{
+ omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
+}
+
+u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+{
+ return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
+}
+
+/**
+ * omap3xxx_prm_dpll3_reset - use DPLL3 reset to reboot the OMAP SoC
+ *
+ * Set the DPLL3 reset bit, which should reboot the SoC. This is the
+ * recommended way to restart the SoC, considering Errata i520. No
+ * return value.
+ */
+void omap3xxx_prm_dpll3_reset(void)
+{
+ omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD,
+ OMAP2_RM_RSTCTRL);
+ /* OCP barrier */
+ omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL);
+}
+
+/**
+ * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
+ * @events: ptr to a u32, preallocated by caller
+ *
+ * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
+ * MPU IRQs, and store the result into the u32 pointed to by @events.
+ * No return value.
+ */
+void omap3xxx_prm_read_pending_irqs(unsigned long *events)
+{
+ u32 mask, st;
+
+ /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
+ mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ events[0] = mask & st;
+}
+
+/**
+ * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
+ *
+ * Force any buffered writes to the PRM IP block to complete. Needed
+ * by the PRM IRQ handler, which reads and writes directly to the IP
+ * block, to avoid race conditions after acknowledging or clearing IRQ
+ * bits. No return value.
+ */
+void omap3xxx_prm_ocp_barrier(void)
+{
+ omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
+ * @saved_mask: ptr to a u32 array to save IRQENABLE bits
+ *
+ * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
+ * must be allocated by the caller. Intended to be used in the PRM
+ * interrupt handler suspend callback. The OCP barrier is needed to
+ * ensure the write to disable PRM interrupts reaches the PRM before
+ * returning; otherwise, spurious interrupts might occur. No return
+ * value.
+ */
+void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
+{
+ saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+ /* OCP barrier */
+ omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
+ * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
+ *
+ * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
+ * to be used in the PRM interrupt handler resume callback to restore
+ * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
+ * barrier should be needed here; any pending PRM interrupts will fire
+ * once the writes reach the PRM. No return value.
+ */
+void omap3xxx_prm_restore_irqen(u32 *saved_mask)
+{
+ omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
+ OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings. Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
+ * return value.
+ */
+void omap3xxx_prm_reconfigure_io_chain(void)
+{
+ int i = 0;
+
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+
+ omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+ OMAP3430_ST_IO_CHAIN_MASK,
+ MAX_IOPAD_LATCH_TIME, i);
+ if (i == MAX_IOPAD_LATCH_TIME)
+ pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+ omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+
+ omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKST);
+
+ omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
+}
+
+/**
+ * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM. For I/O
+ * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
+ * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
+ * No return value.
+ */
+static void __init omap3xxx_prm_enable_io_wakeup(void)
+{
+ if (omap3_has_io_wakeup())
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
+ PM_WKEN);
+}
+
+/**
+ * omap3xxx_prm_read_reset_sources - return the last SoC reset source
+ *
+ * Return a u32 representing the last reset sources of the SoC. The
+ * returned reset source bits are standardized across OMAP SoCs.
+ */
+static u32 omap3xxx_prm_read_reset_sources(void)
+{
+ struct prm_reset_src_map *p;
+ u32 r = 0;
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
+
+ p = omap3xxx_prm_reset_src_map;
+ while (p->reg_shift >= 0 && p->std_shift >= 0) {
+ if (v & (1 << p->reg_shift))
+ r |= 1 << p->std_shift;
+ p++;
+ }
+
+ return r;
+}
+
+/* Powerdomain low-level functions */
+
+/* Applicable only for OMAP3. Not supported on OMAP2 */
+static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP3430_PM_PREPWSTST,
+ OMAP3430_LASTPOWERSTATEENTERED_MASK);
+}
+
+static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTST,
+ OMAP3430_LOGICSTATEST_MASK);
+}
+
+static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL,
+ OMAP3430_LOGICSTATEST_MASK);
+}
+
+static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
+{
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP3430_PM_PREPWSTST,
+ OMAP3430_LASTLOGICSTATEENTERED_MASK);
+}
+
+static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
+{
+ switch (bank) {
+ case 0:
+ return OMAP3430_LASTMEM1STATEENTERED_MASK;
+ case 1:
+ return OMAP3430_LASTMEM2STATEENTERED_MASK;
+ case 2:
+ return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
+ case 3:
+ return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
+ default:
+ WARN_ON(1); /* should never happen */
+ return -EEXIST;
+ }
+ return 0;
+}
+
+static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m;
+
+ m = omap3_get_mem_bank_lastmemst_mask(bank);
+
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP3430_PM_PREPWSTST, m);
+}
+
+static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+ omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
+ return 0;
+}
+
+static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
+{
+ return omap2_prm_rmw_mod_reg_bits(0,
+ 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+ pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+}
+
+static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
+{
+ return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+ 0, pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+}
+
+struct pwrdm_ops omap3_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
+ .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst,
+ .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
+ .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst,
+ .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst,
+ .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst,
+ .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
+ .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
+ .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst,
+ .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst,
+ .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar,
+ .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar,
+ .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
+};
+
+/*
+ *
+ */
+
+static struct prm_ll_data omap3xxx_prm_ll_data = {
+ .read_reset_sources = &omap3xxx_prm_read_reset_sources,
+};
+
+static int __init omap3xxx_prm_init(void)
+{
+ int ret;
+
+ if (!cpu_is_omap34xx())
+ return 0;
+
+ ret = prm_register(&omap3xxx_prm_ll_data);
+ if (ret)
+ return ret;
+
+ omap3xxx_prm_enable_io_wakeup();
+ ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
+ if (!ret)
+ irq_set_status_flags(omap_prcm_event_to_irq("io"),
+ IRQ_NOAUTOEN);
+
+
+ return ret;
+}
+subsys_initcall(omap3xxx_prm_init);
+
+static void __exit omap3xxx_prm_exit(void)
+{
+ if (!cpu_is_omap34xx())
+ return;
+
+ /* Should never happen */
+ WARN(prm_unregister(&omap3xxx_prm_ll_data),
+ "%s: prm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap3xxx_prm_exit);
--- /dev/null
+/*
+ * OMAP3xxx Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The PRM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The PRM on OMAP4 has a new register layout, and is handled
+ * in a separate file.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM3XXX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM3XXX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm2xxx_3xxx.h"
+
+#define OMAP34XX_PRM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+
+
+/*
+ * OMAP3-specific global PRM registers
+ * Use __raw_{read,write}l() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE
+ * bits.)
+ */
+
+#define OMAP3_PRM_REVISION_OFFSET 0x0004
+#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
+#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
+#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
+#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
+#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
+#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
+#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET 0x0058
+#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
+#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
+#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
+#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
+#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
+#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
+#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
+#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
+#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
+#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
+#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
+#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/* OMAP3 specific register offsets */
+#define OMAP3430ES2_PM_WKEN3 0x00f0
+#define OMAP3430ES2_PM_WKST3 0x00b8
+
+#define OMAP3430_PM_MPUGRPSEL 0x00a4
+#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
+
+#define OMAP3430_PM_IVAGRPSEL 0x00a8
+#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
+
+#define OMAP3430_PM_PREPWSTST 0x00e8
+
+#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
+#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
+
+
+#ifndef __ASSEMBLER__
+
+/* OMAP3-specific VP functions */
+u32 omap3_prm_vp_check_txdone(u8 vp_id);
+void omap3_prm_vp_clear_txdone(u8 vp_id);
+
+/*
+ * OMAP3 access functions for voltage controller (VC) and
+ * voltage proccessor (VP) in the PRM.
+ */
+extern u32 omap3_prm_vcvp_read(u8 offset);
+extern void omap3_prm_vcvp_write(u32 val, u8 offset);
+extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+
+extern void omap3xxx_prm_reconfigure_io_chain(void);
+
+/* PRM interrupt-related functions */
+extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
+extern void omap3xxx_prm_ocp_barrier(void);
+extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
+extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+
+extern void omap3xxx_prm_dpll3_reset(void);
+
+extern u32 omap3xxx_prm_get_reset_sources(void);
+
+#endif /* __ASSEMBLER */
+
+
+#endif
/*
* OMAP4 PRM module functions
*
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011-2012 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
* Benoît Cousson
* Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/prcm.h>
#include "soc.h"
#include "iomap.h"
#include "prm-regbits-44xx.h"
#include "prcm44xx.h"
#include "prminst44xx.h"
+#include "powerdomain.h"
+
+/* Static data */
static const struct omap_prcm_irq omap4_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
.restore_irqen = &omap44xx_prm_restore_irqen,
};
+/*
+ * omap44xx_prm_reset_src_map - map from bits in the PRM_RSTST
+ * hardware register (which are specific to OMAP44xx SoCs) to reset
+ * source ID bit shifts (which is an OMAP SoC-independent
+ * enumeration)
+ */
+static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = {
+ { OMAP4430_RST_GLOBAL_WARM_SW_SHIFT,
+ OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
+ { OMAP4430_RST_GLOBAL_COLD_SW_SHIFT,
+ OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
+ { OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT,
+ OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
+ { OMAP4430_MPU_WDT_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+ { OMAP4430_SECURE_WDT_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT },
+ { OMAP4430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
+ { OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT,
+ OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
+ { OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT,
+ OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT },
+ { OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT,
+ OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
+ { OMAP4430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
+ { OMAP4430_C2C_RST_SHIFT, OMAP_C2C_RST_SRC_ID_SHIFT },
+ { -1, -1 },
+};
+
/* PRM low-level functions */
/* Read a register in a CM/PRM instance in the PRM module */
OMAP4_PRM_IO_PMCTRL_OFFSET);
}
-static int __init omap4xxx_prcm_init(void)
+/**
+ * omap44xx_prm_read_reset_sources - return the last SoC reset source
+ *
+ * Return a u32 representing the last reset sources of the SoC. The
+ * returned reset source bits are standardized across OMAP SoCs.
+ */
+static u32 omap44xx_prm_read_reset_sources(void)
+{
+ struct prm_reset_src_map *p;
+ u32 r = 0;
+ u32 v;
+
+ v = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
+ OMAP4_RM_RSTST);
+
+ p = omap44xx_prm_reset_src_map;
+ while (p->reg_shift >= 0 && p->std_shift >= 0) {
+ if (v & (1 << p->reg_shift))
+ r |= 1 << p->std_shift;
+ p++;
+ }
+
+ return r;
+}
+
+/* Powerdomain low-level functions */
+
+static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK,
+ (pwrst << OMAP_POWERSTATE_SHIFT),
+ pwrdm->prcm_partition,
+ pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
+ return 0;
+}
+
+static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+ v &= OMAP_POWERSTATE_MASK;
+ v >>= OMAP_POWERSTATE_SHIFT;
+
+ return v;
+}
+
+static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST);
+ v &= OMAP_POWERSTATEST_MASK;
+ v >>= OMAP_POWERSTATEST_SHIFT;
+
+ return v;
+}
+
+static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST);
+ v &= OMAP4430_LASTPOWERSTATEENTERED_MASK;
+ v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT;
+
+ return v;
+}
+
+static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+ omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
+ (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
+ pwrdm->prcm_partition,
+ pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
+ return 0;
+}
+
+static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+ omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK,
+ OMAP4430_LASTPOWERSTATEENTERED_MASK,
+ pwrdm->prcm_partition,
+ pwrdm->prcm_offs, OMAP4_PM_PWSTST);
+ return 0;
+}
+
+static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ u32 v;
+
+ v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK);
+ omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v,
+ pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+
+ return 0;
+}
+
+static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
+
+ omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+
+ return 0;
+}
+
+static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+ omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+
+ return 0;
+}
+
+static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST);
+ v &= OMAP4430_LOGICSTATEST_MASK;
+ v >>= OMAP4430_LOGICSTATEST_SHIFT;
+
+ return v;
+}
+
+static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
{
- if (cpu_is_omap44xx()) {
- omap44xx_prm_enable_io_wakeup();
- return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+ v &= OMAP4430_LOGICRETSTATE_MASK;
+ v >>= OMAP4430_LOGICRETSTATE_SHIFT;
+
+ return v;
+}
+
+/**
+ * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate
+ * @pwrdm: struct powerdomain * to read the state for
+ *
+ * Reads the previous logic powerstate for a powerdomain. This
+ * function must determine the previous logic powerstate by first
+ * checking the previous powerstate for the domain. If that was OFF,
+ * then logic has been lost. If previous state was RETENTION, the
+ * function reads the setting for the next retention logic state to
+ * see the actual value. In every other case, the logic is
+ * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
+ * depending whether the logic was retained or not.
+ */
+static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
+{
+ int state;
+
+ state = omap4_pwrdm_read_prev_pwrst(pwrdm);
+
+ if (state == PWRDM_POWER_OFF)
+ return PWRDM_POWER_OFF;
+
+ if (state != PWRDM_POWER_RET)
+ return PWRDM_POWER_RET;
+
+ return omap4_pwrdm_read_logic_retst(pwrdm);
+}
+
+static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+/**
+ * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate
+ * @pwrdm: struct powerdomain * to read mem powerstate for
+ * @bank: memory bank index
+ *
+ * Reads the previous memory powerstate for a powerdomain. This
+ * function must determine the previous memory powerstate by first
+ * checking the previous powerstate for the domain. If that was OFF,
+ * then logic has been lost. If previous state was RETENTION, the
+ * function reads the setting for the next memory retention state to
+ * see the actual value. In every other case, the logic is
+ * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
+ * depending whether logic was retained or not.
+ */
+static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ int state;
+
+ state = omap4_pwrdm_read_prev_pwrst(pwrdm);
+
+ if (state == PWRDM_POWER_OFF)
+ return PWRDM_POWER_OFF;
+
+ if (state != PWRDM_POWER_RET)
+ return PWRDM_POWER_RET;
+
+ return omap4_pwrdm_read_mem_retst(pwrdm, bank);
+}
+
+static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+ u32 c = 0;
+
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
+
+ /* XXX Is this udelay() value meaningful? */
+ while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition,
+ pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST) &
+ OMAP_INTRANSITION_MASK) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
+
+ if (c > PWRDM_TRANSITION_BAILOUT) {
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
+ return -EAGAIN;
}
+
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
+
return 0;
}
-subsys_initcall(omap4xxx_prcm_init);
+
+struct pwrdm_ops omap4_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = omap4_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = omap4_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = omap4_pwrdm_read_pwrst,
+ .pwrdm_read_prev_pwrst = omap4_pwrdm_read_prev_pwrst,
+ .pwrdm_set_lowpwrstchange = omap4_pwrdm_set_lowpwrstchange,
+ .pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst,
+ .pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst,
+ .pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst,
+ .pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst,
+ .pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst,
+ .pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst,
+ .pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst,
+ .pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst,
+ .pwrdm_wait_transition = omap4_pwrdm_wait_transition,
+};
+
+/*
+ * XXX document
+ */
+static struct prm_ll_data omap44xx_prm_ll_data = {
+ .read_reset_sources = &omap44xx_prm_read_reset_sources,
+};
+
+static int __init omap44xx_prm_init(void)
+{
+ int ret;
+
+ if (!cpu_is_omap44xx())
+ return 0;
+
+ ret = prm_register(&omap44xx_prm_ll_data);
+ if (ret)
+ return ret;
+
+ omap44xx_prm_enable_io_wakeup();
+
+ return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+}
+subsys_initcall(omap44xx_prm_init);
+
+static void __exit omap44xx_prm_exit(void)
+{
+ if (!cpu_is_omap44xx())
+ return;
+
+ /* Should never happen */
+ WARN(prm_unregister(&omap44xx_prm_ll_data),
+ "%s: prm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap44xx_prm_exit);
extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap44xx_prm_restore_irqen(u32 *saved_mask);
+extern u32 omap44xx_prm_get_reset_sources(void);
+
# endif
#endif
#include <linux/interrupt.h>
#include <linux/slab.h>
-#include <plat/common.h>
-#include <plat/prcm.h>
-
#include "prm2xxx_3xxx.h"
+#include "prm2xxx.h"
+#include "prm3xxx.h"
#include "prm44xx.h"
+#include "common.h"
/*
* OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
*/
static struct omap_prcm_irq_setup *prcm_irq_setup;
+/* prm_base: base virtual address of the PRM IP block */
+void __iomem *prm_base;
+
+/*
+ * prm_ll_data: function pointers to SoC-specific implementations of
+ * common PRM functions
+ */
+static struct prm_ll_data null_prm_ll_data;
+static struct prm_ll_data *prm_ll_data = &null_prm_ll_data;
+
/* Private functions */
/*
return -ENOMEM;
}
-/*
- * Stubbed functions so that common files continue to build when
- * custom builds are used
- * XXX These are temporary and should be removed at the earliest possible
- * opportunity
+/**
+ * omap2_set_globals_prm - set the PRM base address (for early use)
+ * @prm: PRM base virtual address
+ *
+ * XXX Will be replaced when the PRM/CM drivers are completed.
*/
-u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx)
+void __init omap2_set_globals_prm(void __iomem *prm)
{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
+ prm_base = prm;
}
-void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+/**
+ * prm_read_reset_sources - return the sources of the SoC's last reset
+ *
+ * Return a u32 bitmask representing the reset sources that caused the
+ * SoC to reset. The low-level per-SoC functions called by this
+ * function remap the SoC-specific reset source bits into an
+ * OMAP-common set of reset source bits, defined in
+ * arch/arm/mach-omap2/prm.h. Returns the standardized reset source
+ * u32 bitmask from the hardware upon success, or returns (1 <<
+ * OMAP_UNKNOWN_RST_SRC_ID_SHIFT) if no low-level read_reset_sources()
+ * function was registered.
+ */
+u32 prm_read_reset_sources(void)
{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
-}
+ u32 ret = 1 << OMAP_UNKNOWN_RST_SRC_ID_SHIFT;
-u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
- s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
+ if (prm_ll_data->read_reset_sources)
+ ret = prm_ll_data->read_reset_sources();
+ else
+ WARN_ONCE(1, "prm: %s: no mapping function defined for reset sources\n", __func__);
-u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
+ return ret;
}
-u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+/**
+ * prm_register - register per-SoC low-level data with the PRM
+ * @pld: low-level per-SoC OMAP PRM data & function pointers to register
+ *
+ * Register per-SoC low-level OMAP PRM data and function pointers with
+ * the OMAP PRM common interface. The caller must keep the data
+ * pointed to by @pld valid until it calls prm_unregister() and
+ * it returns successfully. Returns 0 upon success, -EINVAL if @pld
+ * is NULL, or -EEXIST if prm_register() has already been called
+ * without an intervening prm_unregister().
+ */
+int prm_register(struct prm_ll_data *pld)
{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
+ if (!pld)
+ return -EINVAL;
-u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
+ if (prm_ll_data != &null_prm_ll_data)
+ return -EEXIST;
-int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
+ prm_ll_data = pld;
-int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
return 0;
}
-int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
- u8 st_shift)
+/**
+ * prm_unregister - unregister per-SoC low-level data & function pointers
+ * @pld: low-level per-SoC OMAP PRM data & function pointers to unregister
+ *
+ * Unregister per-SoC low-level OMAP PRM data and function pointers
+ * that were previously registered with prm_register(). The
+ * caller may not destroy any of the data pointed to by @pld until
+ * this function returns successfully. Returns 0 upon success, or
+ * -EINVAL if @pld is NULL or if @pld does not match the struct
+ * prm_ll_data * previously registered by prm_register().
+ */
+int prm_unregister(struct prm_ll_data *pld)
{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+ if (!pld || prm_ll_data != pld)
+ return -EINVAL;
+
+ prm_ll_data = &null_prm_ll_data;
+
return 0;
}
-
extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
u16 rstctrl_offs);
+extern void omap_prm_base_init(void);
+
#endif
#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
#define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
-#include <plat/sdrc.h>
+#include "sdrc.h"
/* Hynix H8MBX00U0MER-0EM */
static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = {
#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
-#include <plat/sdrc.h>
+#include "sdrc.h"
/* Micron MT46H32M32LF-6 */
/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
#include <linux/io.h>
#include "common.h"
-#include <plat/clock.h>
-#include <plat/sdrc.h>
-
#include "sdram-nokia.h"
+#include "sdrc.h"
/* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
struct sdram_timings {
#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
#define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
-#include <plat/sdrc.h>
+#include "sdrc.h"
/* Numonyx M65KXXXXAM */
static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = {
#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
-#include <plat/sdrc.h>
+#include "sdrc.h"
/* Qimonda HYB18M512160AF-6 */
static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
#include <linux/io.h>
#include "common.h"
-#include <plat/clock.h>
-#include <plat/sram.h>
-
-#include <plat/sdrc.h>
+#include "clock.h"
#include "sdrc.h"
static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
}
-void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
+void __init omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms)
{
- if (omap2_globals->sdrc)
- omap2_sdrc_base = omap2_globals->sdrc;
- if (omap2_globals->sms)
- omap2_sms_base = omap2_globals->sms;
+ omap2_sdrc_base = sdrc;
+ omap2_sms_base = sms;
}
/**
sdrc_write_reg(l, SDRC_POWER);
omap2_sms_save_context();
}
-
-void omap2_sms_write_rot_control(u32 val, unsigned ctx)
-{
- sms_write_reg(val, SMS_ROT_CONTROL(ctx));
-}
-
-void omap2_sms_write_rot_size(u32 val, unsigned ctx)
-{
- sms_write_reg(val, SMS_ROT_SIZE(ctx));
-}
-
-void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
-{
- sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx));
-}
-
#define __ARCH_ARM_MACH_OMAP2_SDRC_H
/*
- * OMAP2 SDRC register definitions
+ * OMAP2/3 SDRC/SMS macros and prototypes
*
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
*
- * Written by Paul Walmsley
+ * Paul Walmsley
+ * Tony Lindgren
+ * Richard Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
*/
#undef DEBUG
-#include <plat/sdrc.h>
-
#ifndef __ASSEMBLER__
#include <linux/io.h>
{
return __raw_readl(OMAP_SMS_REGADDR(reg));
}
+
+extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms);
+
+
+/**
+ * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
+ * @rate: SDRC clock rate (in Hz)
+ * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
+ * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
+ * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
+ * @mr: Value to program to SDRC_MR for this rate
+ *
+ * This structure holds a pre-computed set of register values for the
+ * SDRC for a given SDRC clock rate and SDRAM chip. These are
+ * intended to be pre-computed and specified in an array in the board-*.c
+ * files. The structure is keyed off the 'rate' field.
+ */
+struct omap_sdrc_params {
+ unsigned long rate;
+ u32 actim_ctrla;
+ u32 actim_ctrlb;
+ u32 rfr_ctrl;
+ u32 mr;
+};
+
+#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
+void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1);
+#else
+static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1) {};
+#endif
+
+int omap2_sdrc_get_params(unsigned long r,
+ struct omap_sdrc_params **sdrc_cs0,
+ struct omap_sdrc_params **sdrc_cs1);
+void omap2_sms_save_context(void);
+void omap2_sms_restore_context(void);
+
+struct memory_timings {
+ u32 m_type; /* ddr = 1, sdr = 0 */
+ u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
+ u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
+ u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
+ u32 base_cs; /* base chip select to use for calculations */
+};
+
+extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+struct omap_sdrc_params *rx51_get_sdram_timings(void);
+
+u32 omap2xxx_sdrc_dll_is_unlocked(void);
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
+
+
#else
#define OMAP242X_SDRC_REGADDR(reg) \
OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
#define OMAP34XX_SDRC_REGADDR(reg) \
OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+
#endif /* __ASSEMBLER__ */
/* Minimum frequency that the SDRC DLL can lock at */
*/
#define SDRC_MPURATE_LOOPS 96
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG 0x010
+#define SDRC_CS_CFG 0x040
+#define SDRC_SHARING 0x044
+#define SDRC_ERR_TYPE 0x04C
+#define SDRC_DLLA_CTRL 0x060
+#define SDRC_DLLA_STATUS 0x064
+#define SDRC_DLLB_CTRL 0x068
+#define SDRC_DLLB_STATUS 0x06C
+#define SDRC_POWER 0x070
+#define SDRC_MCFG_0 0x080
+#define SDRC_MR_0 0x084
+#define SDRC_EMR2_0 0x08c
+#define SDRC_ACTIM_CTRL_A_0 0x09c
+#define SDRC_ACTIM_CTRL_B_0 0x0a0
+#define SDRC_RFR_CTRL_0 0x0a4
+#define SDRC_MANUAL_0 0x0a8
+#define SDRC_MCFG_1 0x0B0
+#define SDRC_MR_1 0x0B4
+#define SDRC_EMR2_1 0x0BC
+#define SDRC_ACTIM_CTRL_A_1 0x0C4
+#define SDRC_ACTIM_CTRL_B_1 0x0C8
+#define SDRC_RFR_CTRL_1 0x0D4
+#define SDRC_MANUAL_1 0x0D8
+
+#define SDRC_POWER_AUTOCOUNT_SHIFT 8
+#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
+#define SDRC_POWER_CLKCTRL_SHIFT 4
+#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
+#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+#define OMAP242X_SMS_REGADDR(reg) \
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg) \
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg) \
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG 0x010
+/* REVISIT: fill in other SMS registers here */
+
+
+
#endif
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
#include "soc.h"
#include "iomap.h"
#include "common.h"
-#include "prm2xxx_3xxx.h"
+#include "prm2xxx.h"
#include "clock.h"
#include "sdrc.h"
+#include "sram.h"
/* Memory timing, DLL mode flags */
#define M_DDR 1
#include <linux/console.h>
#include <plat/omap-serial.h>
-#include "common.h"
-#include <plat/dma.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
-#include <plat/serial.h>
+#include <plat-omap/dma-omap.h>
+#include "common.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "omap-pm.h"
+#include "soc.h"
#include "prm2xxx_3xxx.h"
#include "pm.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "control.h"
#include "mux.h"
+#include "serial.h"
/*
* NOTE: By default the serial auto_suspend timeout is disabled as it causes
--- /dev/null
+#include <mach/serial.h>
#include <asm/assembler.h>
-#include <plat/sram.h>
-
#include "omap34xx.h"
#include "iomap.h"
-#include "cm2xxx_3xxx.h"
-#include "prm2xxx_3xxx.h"
+#include "cm3xxx.h"
+#include "prm3xxx.h"
#include "sdrc.h"
+#include "sram.h"
#include "control.h"
/*
-#include <plat/cpu.h>
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
#include "omap24xx.h"
#include "omap34xx.h"
#include "omap44xx.h"
#include "ti81xx.h"
#include "am33xx.h"
#include "omap54xx.h"
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_SOC_OMAP2420
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_SOC_OMAP2430
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap3
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap4
+# endif
+#endif
+
+#ifdef CONFIG_SOC_OMAP5
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap5
+# endif
+#endif
+
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME am33xx
+# endif
+#endif
+
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST 0
+#define OMAP2_DEVICE_TYPE_EMU 1
+#define OMAP2_DEVICE_TYPE_SEC 2
+#define OMAP2_DEVICE_TYPE_GP 3
+#define OMAP2_DEVICE_TYPE_BAD 4
+
+int omap_type(void);
+
+/*
+ * omap_rev bits:
+ * CPU id bits (0730, 1510, 1710, 2422...) [31:16]
+ * CPU revision (See _REV_ defined in cpu.h) [15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
+ */
+unsigned int omap_rev(void);
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x(): True for OMAP2430
+ * cpu_is_omap343x(): True for OMAP3430
+ * cpu_is_omap443x(): True for OMAP4430
+ * cpu_is_omap446x(): True for OMAP4460
+ * cpu_is_omap447x(): True for OMAP4470
+ * soc_is_omap543x(): True for OMAP5430, OMAP5432
+ */
+#define GET_OMAP_CLASS (omap_rev() & 0xff)
+
+#define IS_OMAP_CLASS(class, id) \
+static inline int is_omap ##class (void) \
+{ \
+ return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff)
+
+#define IS_AM_CLASS(class, id) \
+static inline int is_am ##class (void) \
+{ \
+ return (GET_AM_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff)
+
+#define IS_TI_CLASS(class, id) \
+static inline int is_ti ##class (void) \
+{ \
+ return (GET_TI_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id) \
+static inline int is_omap ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+#define IS_TI_SUBCLASS(subclass, id) \
+static inline int is_ti ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+#define IS_AM_SUBCLASS(subclass, id) \
+static inline int is_am ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+IS_OMAP_CLASS(44xx, 0x44)
+IS_AM_CLASS(35xx, 0x35)
+IS_OMAP_CLASS(54xx, 0x54)
+IS_AM_CLASS(33xx, 0x33)
+
+IS_TI_CLASS(81xx, 0x81)
+
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+IS_OMAP_SUBCLASS(363x, 0x363)
+IS_OMAP_SUBCLASS(443x, 0x443)
+IS_OMAP_SUBCLASS(446x, 0x446)
+IS_OMAP_SUBCLASS(447x, 0x447)
+IS_OMAP_SUBCLASS(543x, 0x543)
+
+IS_TI_SUBCLASS(816x, 0x816)
+IS_TI_SUBCLASS(814x, 0x814)
+IS_AM_SUBCLASS(335x, 0x335)
+
+#define cpu_is_omap24xx() 0
+#define cpu_is_omap242x() 0
+#define cpu_is_omap243x() 0
+#define cpu_is_omap34xx() 0
+#define cpu_is_omap343x() 0
+#define cpu_is_ti81xx() 0
+#define cpu_is_ti816x() 0
+#define cpu_is_ti814x() 0
+#define soc_is_am35xx() 0
+#define soc_is_am33xx() 0
+#define soc_is_am335x() 0
+#define cpu_is_omap44xx() 0
+#define cpu_is_omap443x() 0
+#define cpu_is_omap446x() 0
+#define cpu_is_omap447x() 0
+#define soc_is_omap54xx() 0
+#define soc_is_omap543x() 0
+
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP2)
+# undef cpu_is_omap24xx
+# define cpu_is_omap24xx() is_omap24xx()
+# endif
+# if defined (CONFIG_SOC_OMAP2420)
+# undef cpu_is_omap242x
+# define cpu_is_omap242x() is_omap242x()
+# endif
+# if defined (CONFIG_SOC_OMAP2430)
+# undef cpu_is_omap243x
+# define cpu_is_omap243x() is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap34xx
+# undef cpu_is_omap343x
+# define cpu_is_omap34xx() is_omap34xx()
+# define cpu_is_omap343x() is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP2)
+# undef cpu_is_omap24xx
+# define cpu_is_omap24xx() 1
+# endif
+# if defined(CONFIG_SOC_OMAP2420)
+# undef cpu_is_omap242x
+# define cpu_is_omap242x() 1
+# endif
+# if defined(CONFIG_SOC_OMAP2430)
+# undef cpu_is_omap243x
+# define cpu_is_omap243x() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap34xx
+# define cpu_is_omap34xx() 1
+# endif
+# if defined(CONFIG_SOC_OMAP3430)
+# undef cpu_is_omap343x
+# define cpu_is_omap343x() 1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap2420(): True for OMAP2420
+ * cpu_is_omap2422(): True for OMAP2422
+ * cpu_is_omap2423(): True for OMAP2423
+ * cpu_is_omap2430(): True for OMAP2430
+ * cpu_is_omap3430(): True for OMAP3430
+ */
+#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id) \
+static inline int is_omap ##type (void) \
+{ \
+ return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+
+#define cpu_is_omap2420() 0
+#define cpu_is_omap2422() 0
+#define cpu_is_omap2423() 0
+#define cpu_is_omap2430() 0
+#define cpu_is_omap3430() 0
+#define cpu_is_omap3630() 0
+#define soc_is_omap5430() 0
+
+/* These are needed for the common code */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define cpu_is_omap7xx() 0
+#define cpu_is_omap15xx() 0
+#define cpu_is_omap16xx() 0
+#define cpu_is_omap1510() 0
+#define cpu_is_omap1610() 0
+#define cpu_is_omap1611() 0
+#define cpu_is_omap1621() 0
+#define cpu_is_omap1710() 0
+#define cpu_class_is_omap1() 0
+#define cpu_class_is_omap2() 1
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2)
+# undef cpu_is_omap2420
+# undef cpu_is_omap2422
+# undef cpu_is_omap2423
+# undef cpu_is_omap2430
+# define cpu_is_omap2420() is_omap2420()
+# define cpu_is_omap2422() is_omap2422()
+# define cpu_is_omap2423() is_omap2423()
+# define cpu_is_omap2430() is_omap2430()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap3430
+# undef cpu_is_ti81xx
+# undef cpu_is_ti816x
+# undef cpu_is_ti814x
+# undef soc_is_am35xx
+# define cpu_is_omap3430() is_omap3430()
+# undef cpu_is_omap3630
+# define cpu_is_omap3630() is_omap363x()
+# define cpu_is_ti81xx() is_ti81xx()
+# define cpu_is_ti816x() is_ti816x()
+# define cpu_is_ti814x() is_ti814x()
+# define soc_is_am35xx() is_am35xx()
+#endif
+
+# if defined(CONFIG_SOC_AM33XX)
+# undef soc_is_am33xx
+# undef soc_is_am335x
+# define soc_is_am33xx() is_am33xx()
+# define soc_is_am335x() is_am335x()
+#endif
+
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# undef cpu_is_omap446x
+# undef cpu_is_omap447x
+# define cpu_is_omap44xx() is_omap44xx()
+# define cpu_is_omap443x() is_omap443x()
+# define cpu_is_omap446x() is_omap446x()
+# define cpu_is_omap447x() is_omap447x()
+# endif
+
+# if defined(CONFIG_SOC_OMAP5)
+# undef soc_is_omap54xx
+# undef soc_is_omap543x
+# define soc_is_omap54xx() is_omap54xx()
+# define soc_is_omap543x() is_omap543x()
+#endif
+
+/* Various silicon revisions for omap2 */
+#define OMAP242X_CLASS 0x24200024
+#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
+#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
+
+#define OMAP243X_CLASS 0x24300024
+#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
+
+#define OMAP343X_CLASS 0x34300034
+#define OMAP3430_REV_ES1_0 OMAP343X_CLASS
+#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
+#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8))
+#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8))
+#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8))
+#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8))
+
+#define OMAP363X_CLASS 0x36300034
+#define OMAP3630_REV_ES1_0 OMAP363X_CLASS
+#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
+#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
+
+#define TI816X_CLASS 0x81600034
+#define TI8168_REV_ES1_0 TI816X_CLASS
+#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
+
+#define TI814X_CLASS 0x81400034
+#define TI8148_REV_ES1_0 TI814X_CLASS
+#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8))
+#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8))
+
+#define AM35XX_CLASS 0x35170034
+#define AM35XX_REV_ES1_0 AM35XX_CLASS
+#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8))
+
+#define AM335X_CLASS 0x33500033
+#define AM335X_REV_ES1_0 AM335X_CLASS
+
+#define OMAP443X_CLASS 0x44300044
+#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
+#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8))
+#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8))
+#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8))
+#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8))
+
+#define OMAP446X_CLASS 0x44600044
+#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
+#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8))
+
+#define OMAP447X_CLASS 0x44700044
+#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8))
+
+#define OMAP54XX_CLASS 0x54000054
+#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+
+void omap2xxx_check_revision(void);
+void omap3xxx_check_revision(void);
+void omap4xxx_check_revision(void);
+void omap5xxx_check_revision(void);
+void omap3xxx_check_features(void);
+void ti81xx_check_features(void);
+void omap4xxx_check_features(void);
+
+/*
+ * Runtime detection of OMAP3 features
+ *
+ * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
+ * family have OS-level control over the I/O chain clock. This is
+ * to avoid a window during which wakeups could potentially be lost
+ * during powerdomain transitions. If this bit is set, it
+ * indicates that the chip does support OS-level control of this
+ * feature.
+ */
+extern u32 omap_features;
+
+#define OMAP3_HAS_L2CACHE BIT(0)
+#define OMAP3_HAS_IVA BIT(1)
+#define OMAP3_HAS_SGX BIT(2)
+#define OMAP3_HAS_NEON BIT(3)
+#define OMAP3_HAS_ISP BIT(4)
+#define OMAP3_HAS_192MHZ_CLK BIT(5)
+#define OMAP3_HAS_IO_WAKEUP BIT(6)
+#define OMAP3_HAS_SDRC BIT(7)
+#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8)
+#define OMAP4_HAS_MPU_1GHZ BIT(9)
+#define OMAP4_HAS_MPU_1_2GHZ BIT(10)
+#define OMAP4_HAS_MPU_1_5GHZ BIT(11)
+
+
+#define OMAP3_HAS_FEATURE(feat,flag) \
+static inline unsigned int omap3_has_ ##feat(void) \
+{ \
+ return omap_features & OMAP3_HAS_ ##flag; \
+} \
+
+OMAP3_HAS_FEATURE(l2cache, L2CACHE)
+OMAP3_HAS_FEATURE(sgx, SGX)
+OMAP3_HAS_FEATURE(iva, IVA)
+OMAP3_HAS_FEATURE(neon, NEON)
+OMAP3_HAS_FEATURE(isp, ISP)
+OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
+OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
+OMAP3_HAS_FEATURE(sdrc, SDRC)
+OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
+
+/*
+ * Runtime detection of OMAP4 features
+ */
+#define OMAP4_HAS_FEATURE(feat, flag) \
+static inline unsigned int omap4_has_ ##feat(void) \
+{ \
+ return omap_features & OMAP4_HAS_ ##flag; \
+} \
+
+OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
+OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
+OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
+
+#endif /* __ASSEMBLY__ */
+
#include <linux/slab.h>
#include <linux/io.h>
-#include <plat/omap_device.h>
-
+#include "soc.h"
+#include "omap_device.h"
#include "voltage.h"
#include "control.h"
#include "pm.h"
--- /dev/null
+/*
+ *
+ * OMAP SRAM detection and management
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009-2012 Texas Instruments
+ * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fncpy.h>
+#include <asm/tlb.h>
+#include <asm/cacheflush.h>
+
+#include <asm/mach/map.h>
+
+#include "soc.h"
+#include "iomap.h"
+#include "prm2xxx_3xxx.h"
+#include "sdrc.h"
+#include "sram.h"
+
+#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
+#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA
+#else
+#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
+#endif
+#define OMAP5_SRAM_PA 0x40300000
+
+#define SRAM_BOOTLOADER_SZ 0x00
+
+#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
+
+#define GP_DEVICE 0x300
+
+#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
+
+static unsigned long omap_sram_start;
+static unsigned long omap_sram_skip;
+static unsigned long omap_sram_size;
+
+/*
+ * Depending on the target RAMFS firewall setup, the public usable amount of
+ * SRAM varies. The default accessible size for all device types is 2k. A GP
+ * device allows ARM11 but not other initiators for full size. This
+ * functionality seems ok until some nice security API happens.
+ */
+static int is_sram_locked(void)
+{
+ if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
+ /* RAMFW: R/W access to all initiators for all qualifier sets */
+ if (cpu_is_omap242x()) {
+ __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
+ __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
+ __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
+ }
+ if (cpu_is_omap34xx()) {
+ __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
+ __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
+ __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
+ __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
+ __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
+ }
+ return 0;
+ } else
+ return 1; /* assume locked with no PPA or security driver */
+}
+
+/*
+ * The amount of SRAM depends on the core type.
+ * Note that we cannot try to test for SRAM here because writes
+ * to secure SRAM will hang the system. Also the SRAM is not
+ * yet mapped at this point.
+ */
+static void __init omap_detect_sram(void)
+{
+ omap_sram_skip = SRAM_BOOTLOADER_SZ;
+ if (is_sram_locked()) {
+ if (cpu_is_omap34xx()) {
+ omap_sram_start = OMAP3_SRAM_PUB_PA;
+ if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+ (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+ omap_sram_size = 0x7000; /* 28K */
+ omap_sram_skip += SZ_16K;
+ } else {
+ omap_sram_size = 0x8000; /* 32K */
+ }
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_start = OMAP4_SRAM_PUB_PA;
+ omap_sram_size = 0xa000; /* 40K */
+ } else if (soc_is_omap54xx()) {
+ omap_sram_start = OMAP5_SRAM_PA;
+ omap_sram_size = SZ_128K; /* 128KB */
+ } else {
+ omap_sram_start = OMAP2_SRAM_PUB_PA;
+ omap_sram_size = 0x800; /* 2K */
+ }
+ } else {
+ if (soc_is_am33xx()) {
+ omap_sram_start = AM33XX_SRAM_PA;
+ omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap34xx()) {
+ omap_sram_start = OMAP3_SRAM_PA;
+ omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_start = OMAP4_SRAM_PA;
+ omap_sram_size = 0xe000; /* 56K */
+ } else if (soc_is_omap54xx()) {
+ omap_sram_start = OMAP5_SRAM_PA;
+ omap_sram_size = SZ_128K; /* 128KB */
+ } else {
+ omap_sram_start = OMAP2_SRAM_PA;
+ if (cpu_is_omap242x())
+ omap_sram_size = 0xa0000; /* 640K */
+ else if (cpu_is_omap243x())
+ omap_sram_size = 0x10000; /* 64K */
+ }
+ }
+}
+
+/*
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
+ */
+static void __init omap2_map_sram(void)
+{
+ int cached = 1;
+
+#ifdef CONFIG_OMAP4_ERRATA_I688
+ if (cpu_is_omap44xx()) {
+ omap_sram_start += PAGE_SIZE;
+ omap_sram_size -= SZ_16K;
+ }
+#endif
+ if (cpu_is_omap34xx()) {
+ /*
+ * SRAM must be marked as non-cached on OMAP3 since the
+ * CORE DPLL M2 divider change code (in SRAM) runs with the
+ * SDRAM controller disabled, and if it is marked cached,
+ * the ARM may attempt to write cache lines back to SDRAM
+ * which will cause the system to hang.
+ */
+ cached = 0;
+ }
+
+ omap_map_sram(omap_sram_start, omap_sram_size,
+ omap_sram_skip, cached);
+}
+
+static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock)
+{
+ BUG_ON(!_omap2_sram_ddr_init);
+ _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
+ base_cs, force_unlock);
+}
+
+static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
+{
+ BUG_ON(!_omap2_sram_reprogram_sdrc);
+ _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
+}
+
+static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
+{
+ BUG_ON(!_omap2_set_prcm);
+ return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
+}
+
+#ifdef CONFIG_SOC_OMAP2420
+static int __init omap242x_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
+ omap242x_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
+ omap242x_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
+ omap242x_sram_set_prcm_sz);
+
+ return 0;
+}
+#else
+static inline int omap242x_sram_init(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2430
+static int __init omap243x_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
+ omap243x_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
+ omap243x_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
+ omap243x_sram_set_prcm_sz);
+
+ return 0;
+}
+#else
+static inline int omap243x_sram_init(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+
+static u32 (*_omap3_sram_configure_core_dpll)(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+
+u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
+{
+ BUG_ON(!_omap3_sram_configure_core_dpll);
+ return _omap3_sram_configure_core_dpll(
+ m2, unlock_dll, f, inc,
+ sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
+ sdrc_actim_ctrl_b_0, sdrc_mr_0,
+ sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
+ sdrc_actim_ctrl_b_1, sdrc_mr_1);
+}
+
+void omap3_sram_restore_context(void)
+{
+ omap_sram_reset();
+
+ _omap3_sram_configure_core_dpll =
+ omap_sram_push(omap3_sram_configure_core_dpll,
+ omap3_sram_configure_core_dpll_sz);
+ omap_push_sram_idle();
+}
+
+static inline int omap34xx_sram_init(void)
+{
+ omap3_sram_restore_context();
+ return 0;
+}
+#else
+static inline int omap34xx_sram_init(void)
+{
+ return 0;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+static inline int am33xx_sram_init(void)
+{
+ return 0;
+}
+
+int __init omap_sram_init(void)
+{
+ omap_detect_sram();
+ omap2_map_sram();
+
+ if (cpu_is_omap242x())
+ omap242x_sram_init();
+ else if (cpu_is_omap2430())
+ omap243x_sram_init();
+ else if (soc_is_am33xx())
+ am33xx_sram_init();
+ else if (cpu_is_omap34xx())
+ omap34xx_sram_init();
+
+ return 0;
+}
--- /dev/null
+/*
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASSEMBLY__
+#include <plat/sram.h>
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+extern u32 omap3_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern void omap3_sram_restore_context(void);
+
+/* Do not use these */
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+extern u32 omap3_sram_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
+#ifdef CONFIG_PM
+extern void omap_push_sram_idle(void);
+#else
+static inline void omap_push_sram_idle(void) {}
+#endif /* CONFIG_PM */
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA 0x40200000
+#define OMAP3_SRAM_PA 0x40200000
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PA 0x40304000
+#define OMAP4_SRAM_VA 0xfe404000
+#else
+#define OMAP4_SRAM_PA 0x40300000
+#endif
+#define AM33XX_SRAM_PA 0x40300000
#include "soc.h"
#include "iomap.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "prm2xxx.h"
+#include "cm2xxx.h"
#include "sdrc.h"
.text
#include "soc.h"
#include "iomap.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "prm2xxx.h"
+#include "cm2xxx.h"
#include "sdrc.h"
.text
#include "soc.h"
#include "iomap.h"
#include "sdrc.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
/*
* This file needs be built unconditionally as ARM to interoperate correctly
#define TI81XX_CTRL_BASE TI81XX_SCM_BASE
#define TI81XX_PRCM_BASE 0x48180000
+/*
+ * Adjust TAP register base such that omap3_check_revision accesses the correct
+ * TI81XX register for checking device ID (it adds 0x204 to tap base while
+ * TI81XX DEVICE ID register is at offset 0x600 from control base).
+ */
+#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \
+ TI81XX_CONTROL_DEVICE_ID - 0x204)
+
+
#define TI81XX_ARM_INTC_BASE 0x48200000
#endif /* __ASM_ARCH_TI81XX_H */
#include <linux/clockchips.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/mach/time.h>
#include <asm/smp_twd.h>
#include <asm/sched_clock.h>
#include <asm/arch_timer.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include <plat/counter-32k.h>
#include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
#include "soc.h"
#include "common.h"
#define OMAP3_CLKEV_SOURCE OMAP3_32K_SOURCE
#define OMAP4_CLKEV_SOURCE OMAP4_32K_SOURCE
#define OMAP3_SECURE_TIMER 12
+#define TIMER_PROP_SECURE "ti,timer-secure"
#else
#define OMAP2_CLKEV_SOURCE OMAP2_MPU_SOURCE
#define OMAP3_CLKEV_SOURCE OMAP3_MPU_SOURCE
#define OMAP4_CLKEV_SOURCE OMAP4_MPU_SOURCE
#define OMAP3_SECURE_TIMER 1
+#define TIMER_PROP_SECURE "ti,timer-alwon"
#endif
#define REALTIME_COUNTER_BASE 0x48243200
.set_mode = omap2_gp_timer_set_mode,
};
+static struct property device_disabled = {
+ .name = "status",
+ .length = sizeof("disabled"),
+ .value = "disabled",
+};
+
+static struct of_device_id omap_timer_match[] __initdata = {
+ { .compatible = "ti,omap2-timer", },
+ { }
+};
+
+static struct of_device_id omap_counter_match[] __initdata = {
+ { .compatible = "ti,omap-counter32k", },
+ { }
+};
+
+/**
+ * omap_get_timer_dt - get a timer using device-tree
+ * @match - device-tree match structure for matching a device type
+ * @property - optional timer property to match
+ *
+ * Helper function to get a timer during early boot using device-tree for use
+ * as kernel system timer. Optionally, the property argument can be used to
+ * select a timer with a specific property. Once a timer is found then mark
+ * the timer node in device-tree as disabled, to prevent the kernel from
+ * registering this timer as a platform device and so no one else can use it.
+ */
+static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
+ const char *property)
+{
+ struct device_node *np;
+
+ for_each_matching_node(np, match) {
+ if (!of_device_is_available(np)) {
+ of_node_put(np);
+ continue;
+ }
+
+ if (property && !of_get_property(np, property, NULL)) {
+ of_node_put(np);
+ continue;
+ }
+
+ prom_add_property(np, &device_disabled);
+ return np;
+ }
+
+ return NULL;
+}
+
+/**
+ * omap_dmtimer_init - initialisation function when device tree is used
+ *
+ * For secure OMAP3 devices, timers with device type "timer-secure" cannot
+ * be used by the kernel as they are reserved. Therefore, to prevent the
+ * kernel registering these devices remove them dynamically from the device
+ * tree on boot.
+ */
+void __init omap_dmtimer_init(void)
+{
+ struct device_node *np;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ /* If we are a secure device, remove any secure timer nodes */
+ if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) {
+ np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure");
+ if (np)
+ of_node_put(np);
+ }
+}
+
static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
int gptimer_id,
- const char *fck_source)
+ const char *fck_source,
+ const char *property)
{
char name[10]; /* 10 = sizeof("gptXX_Xck0") */
+ const char *oh_name;
+ struct device_node *np;
struct omap_hwmod *oh;
struct resource irq_rsrc, mem_rsrc;
size_t size;
int res = 0;
int r;
- sprintf(name, "timer%d", gptimer_id);
- omap_hwmod_setup_one(name);
- oh = omap_hwmod_lookup(name);
+ if (of_have_populated_dt()) {
+ np = omap_get_timer_dt(omap_timer_match, NULL);
+ if (!np)
+ return -ENODEV;
+
+ of_property_read_string_index(np, "ti,hwmods", 0, &oh_name);
+ if (!oh_name)
+ return -ENODEV;
+
+ timer->irq = irq_of_parse_and_map(np, 0);
+ if (!timer->irq)
+ return -ENXIO;
+
+ timer->io_base = of_iomap(np, 0);
+
+ of_node_put(np);
+ } else {
+ if (omap_dm_timer_reserve_systimer(gptimer_id))
+ return -ENODEV;
+
+ sprintf(name, "timer%d", gptimer_id);
+ oh_name = name;
+ }
+
+ omap_hwmod_setup_one(oh_name);
+ oh = omap_hwmod_lookup(oh_name);
+
if (!oh)
return -ENODEV;
- r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq_rsrc);
- if (r)
- return -ENXIO;
- timer->irq = irq_rsrc.start;
-
- r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, &mem_rsrc);
- if (r)
- return -ENXIO;
- timer->phys_base = mem_rsrc.start;
- size = mem_rsrc.end - mem_rsrc.start;
+ if (!of_have_populated_dt()) {
+ r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL,
+ &irq_rsrc);
+ if (r)
+ return -ENXIO;
+ timer->irq = irq_rsrc.start;
+
+ r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL,
+ &mem_rsrc);
+ if (r)
+ return -ENXIO;
+ timer->phys_base = mem_rsrc.start;
+ size = mem_rsrc.end - mem_rsrc.start;
+
+ /* Static mapping, never released */
+ timer->io_base = ioremap(timer->phys_base, size);
+ }
- /* Static mapping, never released */
- timer->io_base = ioremap(timer->phys_base, size);
if (!timer->io_base)
return -ENXIO;
omap_hwmod_enable(oh);
- if (omap_dm_timer_reserve_systimer(gptimer_id))
- return -ENODEV;
-
+ /* FIXME: Need to remove hard-coded test on timer ID */
if (gptimer_id != 12) {
struct clk *src;
} else {
res = __omap_dm_timer_set_source(timer->fclk, src);
if (IS_ERR_VALUE(res))
- pr_warning("%s: timer%i cannot set source\n",
- __func__, gptimer_id);
+ pr_warn("%s: %s cannot set source\n",
+ __func__, oh->name);
clk_put(src);
}
}
}
static void __init omap2_gp_clockevent_init(int gptimer_id,
- const char *fck_source)
+ const char *fck_source,
+ const char *property)
{
int res;
- res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source);
+ res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property);
BUG_ON(res);
omap2_gp_timer_irq.dev_id = &clkev;
static int __init omap2_sync32k_clocksource_init(void)
{
int ret;
+ struct device_node *np = NULL;
struct omap_hwmod *oh;
void __iomem *vbase;
const char *oh_name = "counter_32k";
+ /*
+ * If device-tree is present, then search the DT blob
+ * to see if the 32kHz counter is supported.
+ */
+ if (of_have_populated_dt()) {
+ np = omap_get_timer_dt(omap_counter_match, NULL);
+ if (!np)
+ return -ENODEV;
+
+ of_property_read_string_index(np, "ti,hwmods", 0, &oh_name);
+ if (!oh_name)
+ return -ENODEV;
+ }
+
/*
* First check hwmod data is available for sync32k counter
*/
omap_hwmod_setup_one(oh_name);
- vbase = omap_hwmod_get_mpu_rt_va(oh);
+ if (np) {
+ vbase = of_iomap(np, 0);
+ of_node_put(np);
+ } else {
+ vbase = omap_hwmod_get_mpu_rt_va(oh);
+ }
+
if (!vbase) {
pr_warn("%s: failed to get counter_32k resource\n", __func__);
return -ENXIO;
{
int res;
- res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source);
+ res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL);
BUG_ON(res);
__omap_dm_timer_load_start(&clksrc,
{}
#endif
-#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, \
+#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \
clksrc_nr, clksrc_src) \
static void __init omap##name##_timer_init(void) \
{ \
- omap2_gp_clockevent_init((clkev_nr), clkev_src); \
+ omap_dmtimer_init(); \
+ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
omap2_clocksource_init((clksrc_nr), clksrc_src); \
}
};
#ifdef CONFIG_ARCH_OMAP2
-OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE)
+OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, "ti,timer-alwon",
+ 2, OMAP2_MPU_SOURCE)
OMAP_SYS_TIMER(2)
#endif
#ifdef CONFIG_ARCH_OMAP3
-OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE)
+OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, "ti,timer-alwon",
+ 2, OMAP3_MPU_SOURCE)
OMAP_SYS_TIMER(3)
OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE,
- 2, OMAP3_MPU_SOURCE)
+ TIMER_PROP_SECURE, 2, OMAP3_MPU_SOURCE)
OMAP_SYS_TIMER(3_secure)
#endif
#ifdef CONFIG_SOC_AM33XX
-OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, 2, OMAP4_MPU_SOURCE)
+OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon",
+ 2, OMAP4_MPU_SOURCE)
OMAP_SYS_TIMER(3_am33xx)
#endif
static void __init omap4_timer_init(void)
{
- omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE);
+ omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE, "ti,timer-alwon");
omap2_clocksource_init(2, OMAP4_MPU_SOURCE);
#ifdef CONFIG_LOCAL_TIMERS
/* Local timers are not supprted on OMAP4430 ES1.0 */
{
int err;
- omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE);
+ omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE, "ti,timer-alwon");
omap2_clocksource_init(2, OMAP4_MPU_SOURCE);
realtime_counter_init();
if (timer_dev_attr)
pdata->timer_capability = timer_dev_attr->timer_capability;
+ pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
+
pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
NULL, 0, 0);
{
int ret;
+ /* If dtb is there, the devices will be created dynamically */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL);
if (unlikely(ret)) {
pr_err("%s: device registration failed.\n", __func__);
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
-#include <plat/i2c.h>
-#include <plat/usb.h>
-
#include "soc.h"
#include "twl-common.h"
#include "pm.h"
#include <asm/io.h>
-#include <plat/usb.h>
-#include <plat/omap_device.h>
-
+#include "soc.h"
+#include "omap_device.h"
#include "mux.h"
+#include "usb.h"
#ifdef CONFIG_MFD_OMAP_USB_HOST
#include <linux/io.h>
#include <linux/usb/musb.h>
-#include <plat/usb.h>
-#include <plat/omap_device.h>
-
-#include "am35xx.h"
-
+#include "omap_device.h"
+#include "soc.h"
#include "mux.h"
+#include "usb.h"
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/export.h>
+#include <linux/platform_data/usb-omap.h>
#include <linux/usb/musb.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "mux.h"
--- /dev/null
+#include <linux/platform_data/usb-omap.h>
+
+/* AM35x */
+/* USB 2.0 PHY Control */
+#define CONF2_PHY_GPIOMODE (1 << 23)
+#define CONF2_OTGMODE (3 << 14)
+#define CONF2_NO_OVERRIDE (0 << 14)
+#define CONF2_FORCE_HOST (1 << 14)
+#define CONF2_FORCE_DEVICE (2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN (1 << 13)
+#define CONF2_VBDTCTEN (1 << 12)
+#define CONF2_REFFREQ_24MHZ (2 << 8)
+#define CONF2_REFFREQ_26MHZ (7 << 8)
+#define CONF2_REFFREQ_13MHZ (6 << 8)
+#define CONF2_REFFREQ (0xf << 8)
+#define CONF2_PHYCLKGD (1 << 7)
+#define CONF2_VBUSSENSE (1 << 6)
+#define CONF2_PHY_PLLON (1 << 5)
+#define CONF2_RESET (1 << 4)
+#define CONF2_PHYPWRDN (1 << 3)
+#define CONF2_OTGPWRDN (1 << 2)
+#define CONF2_DATPOL (1 << 1)
+
+/* TI81XX specific definitions */
+#define USBCTRL0 0x620
+#define USBSTAT0 0x624
+
+/* TI816X PHY controls bits */
+#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
+#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
+
+/* TI814X PHY controls bits */
+#define USBPHY_CM_PWRDN (1 << 0)
+#define USBPHY_OTG_PWRDN (1 << 1)
+#define USBPHY_CHGDET_DIS (1 << 2)
+#define USBPHY_CHGDET_RSTRT (1 << 3)
+#define USBPHY_SRCONDM (1 << 4)
+#define USBPHY_SINKONDP (1 << 5)
+#define USBPHY_CHGISINK_EN (1 << 6)
+#define USBPHY_CHGVSRC_EN (1 << 7)
+#define USBPHY_DMPULLUP (1 << 8)
+#define USBPHY_DPPULLUP (1 << 9)
+#define USBPHY_CDET_EXTCTL (1 << 10)
+#define USBPHY_GPIO_MODE (1 << 12)
+#define USBPHY_DPOPBUFCTL (1 << 13)
+#define USBPHY_DMOPBUFCTL (1 << 14)
+#define USBPHY_DPINPUT (1 << 15)
+#define USBPHY_DMINPUT (1 << 16)
+#define USBPHY_DPGPIO_PD (1 << 17)
+#define USBPHY_DMGPIO_PD (1 << 18)
+#define USBPHY_OTGVDET_EN (1 << 19)
+#define USBPHY_OTGSESSEND_EN (1 << 20)
+#define USBPHY_DATA_POLARITY (1 << 23)
+
+struct usbhs_omap_board_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+
+ /* have to be valid if phy_reset is true and portx is in phy mode */
+ int reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+ /* Set this to true for ES2.x silicon */
+ unsigned es2_compatibility:1;
+
+ unsigned phy_reset:1;
+
+ /*
+ * Regulators for USB PHYs.
+ * Each PHY can have a separate regulator.
+ */
+ struct regulator *regulator[OMAP3_HS_USB_PORTS];
+};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
+extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
+
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+extern void am35x_set_mode(u8 musb_mode);
+extern void ti81xx_musb_phy_power(u8 on);
+
/*
* OMAP2+ MPU WD_TIMER-specific code
*
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
#include <linux/io.h>
#include <linux/err.h>
-#include <plat/omap_hwmod.h>
+#include <linux/platform_data/omap-wd-timer.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
#include "wd_timer.h"
#include "common.h"
+#include "prm.h"
+#include "soc.h"
/*
* In order to avoid any assumptions from bootloader regarding WDT
#define OMAP_WDT_WPS 0x34
#define OMAP_WDT_SPR 0x48
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT 10000
-
int omap2_wd_timer_disable(struct omap_hwmod *oh)
{
void __iomem *base;
return (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT :
omap2_wd_timer_disable(oh);
}
+
+static int __init omap_init_wdt(void)
+{
+ int id = -1;
+ struct platform_device *pdev;
+ struct omap_hwmod *oh;
+ char *oh_name = "wd_timer2";
+ char *dev_name = "omap_wdt";
+ struct omap_wd_timer_platform_data pdata;
+
+ if (!cpu_class_is_omap2() || of_have_populated_dt())
+ return 0;
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up wd_timer%d hwmod\n", id);
+ return -EINVAL;
+ }
+
+ pdata.read_reset_sources = prm_read_reset_sources;
+
+ pdev = omap_device_build(dev_name, id, oh, &pdata,
+ sizeof(struct omap_wd_timer_platform_data),
+ NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
+ dev_name, oh->name);
+ return 0;
+}
+subsys_initcall(omap_init_wdt);
#ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
#define __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
extern int omap2_wd_timer_disable(struct omap_hwmod *oh);
extern int omap2_wd_timer_reset(struct omap_hwmod *oh);
.y_flip = true,
};
-static struct bu21013_platform_device tsc_plat2_device = {
- .cs_en = bu21013_gpio_board_init,
- .cs_dis = bu21013_gpio_board_exit,
- .irq_read_val = bu21013_read_pin_val,
- .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
- .touch_x_max = TOUCH_XMAX,
- .touch_y_max = TOUCH_YMAX,
- .ext_clk = false,
- .x_flip = false,
- .y_flip = true,
-};
-
static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
{
I2C_BOARD_INFO("bu21013_tp", 0x5C),
},
{
I2C_BOARD_INFO("bu21013_tp", 0x5D),
- .platform_data = &tsc_plat2_device,
+ .platform_data = &tsc_plat_device,
},
};
void __init mop500_stuib_init(void)
{
- if (machine_is_hrefv60()) {
+ if (machine_is_hrefv60())
tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
- tsc_plat2_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
- } else {
+ else
tsc_plat_device.cs_pin = GPIO_BU21013_CS;
- tsc_plat2_device.cs_pin = GPIO_BU21013_CS;
-
- }
mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib,
ARRAY_SIZE(mop500_i2c0_devices_stuib));
#include <linux/smsc911x.h>
#include <linux/gpio_keys.h>
#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
#include <linux/leds.h>
#include <linux/pinctrl/consumer.h>
};
#endif
-static struct pl022_ssp_controller ssp0_plat = {
+struct pl022_ssp_controller ssp0_plat = {
.bus_id = 0,
#ifdef CONFIG_STE_DMA40
.enable_dma = 1,
};
#endif
-static struct amba_pl011_data uart0_plat = {
+struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
#endif
};
-static struct amba_pl011_data uart1_plat = {
+struct amba_pl011_data uart1_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart1_dma_cfg_rx,
#endif
};
-static struct amba_pl011_data uart2_plat = {
+struct amba_pl011_data uart2_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart2_dma_cfg_rx,
/* This board has full regulator constraints */
regulator_has_full_constraints();
-
- mop500_uib_init();
}
static void __init snowball_init_machine(void)
/* This board has full regulator constraints */
regulator_has_full_constraints();
-
- mop500_uib_init();
}
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
.init_machine = snowball_init_machine,
- .init_late = ux500_init_late,
-MACHINE_END
-
-#ifdef CONFIG_MACH_UX500_DT
-
-struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
- /* Requires call-back bindings. */
- OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
- /* Requires DMA and call-back bindings. */
- OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
- OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
- OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
- /* Requires DMA bindings. */
- OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
- OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
- /* Requires clock name bindings. */
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
- /* Requires device name bindings. */
- OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
- /* Requires clock name and DMA bindings. */
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
- "ux500-msp-i2s.0", &msp0_platform_data),
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
- "ux500-msp-i2s.1", &msp1_platform_data),
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
- "ux500-msp-i2s.2", &msp2_platform_data),
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
- "ux500-msp-i2s.3", &msp3_platform_data),
- {},
-};
-
-static const struct of_device_id u8500_local_bus_nodes[] = {
- /* only create devices below soc node */
- { .compatible = "stericsson,db8500", },
- { .compatible = "stericsson,db8500-prcmu", },
- { .compatible = "simple-bus"},
- { },
-};
-
-static void __init u8500_init_machine(void)
-{
- struct device *parent = NULL;
- int i2c0_devs;
- int i;
-
- /* Pinmaps must be in place before devices register */
- if (of_machine_is_compatible("st-ericsson,mop500"))
- mop500_pinmaps_init();
- else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
- snowball_pinmaps_init();
- else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
- hrefv60_pinmaps_init();
-
- parent = u8500_of_init_devices();
-
- for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
- mop500_platform_devs[i]->dev.parent = parent;
-
- /* automatically probe child nodes of db8500 device */
- of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
-
- if (of_machine_is_compatible("st-ericsson,mop500")) {
- mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-
- platform_add_devices(mop500_platform_devs,
- ARRAY_SIZE(mop500_platform_devs));
-
- mop500_sdi_init(parent);
- mop500_audio_init(parent);
- i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
- i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
- i2c_register_board_info(2, mop500_i2c2_devices,
- ARRAY_SIZE(mop500_i2c2_devices));
-
- mop500_uib_init();
-
- } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
- mop500_of_audio_init(parent);
- } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
- /*
- * The HREFv60 board removed a GPIO expander and routed
- * all these GPIO pins to the internal GPIO controller
- * instead.
- */
- mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
- platform_add_devices(mop500_platform_devs,
- ARRAY_SIZE(mop500_platform_devs));
-
- mop500_uib_init();
- }
-
- /* This board has full regulator constraints */
- regulator_has_full_constraints();
-}
-
-static const char * u8500_dt_board_compat[] = {
- "calaosystems,snowball-a9500",
- "st-ericsson,hrefv60+",
- "st-ericsson,u8500",
- "st-ericsson,mop500",
- NULL,
-};
-
-
-DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
- .smp = smp_ops(ux500_smp_ops),
- .map_io = u8500_map_io,
- .init_irq = ux500_init_irq,
- /* we re-use nomadik timer here */
- .timer = &ux500_timer,
- .handle_irq = gic_handle_irq,
- .init_machine = u8500_init_machine,
- .init_late = ux500_init_late,
- .dt_compat = u8500_dt_board_compat,
+ .init_late = NULL,
MACHINE_END
-#endif
extern struct msp_i2s_platform_data msp2_platform_data;
extern struct msp_i2s_platform_data msp3_platform_data;
extern struct arm_pmu_platdata db8500_pmu_platdata;
+extern struct amba_pl011_data uart0_plat;
+extern struct amba_pl011_data uart1_plat;
+extern struct amba_pl011_data uart2_plat;
+extern struct pl022_ssp_controller ssp0_plat;
extern void mop500_sdi_init(struct device *parent);
extern void snowball_sdi_init(struct device *parent);
int __init mop500_uib_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
unsigned n);
-
-/* TODO: Once all pieces are DT:ed, remove completely. */
-struct device * __init u8500_of_init_devices(void);
-
#endif
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/regulator/machine.h>
#include <asm/pmu.h>
#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
+#include "board-mop500.h"
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_uart_io_desc[] __initdata = {
return parent;
}
+#ifdef CONFIG_MACH_UX500_DT
+
/* TODO: Once all pieces are DT:ed, remove completely. */
-struct device * __init u8500_of_init_devices(void)
+static struct device * __init u8500_of_init_devices(void)
{
- struct device *parent;
-
- parent = db8500_soc_device_init();
+ struct device *parent = db8500_soc_device_init();
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
return parent;
}
+
+static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+ /* Requires call-back bindings. */
+ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
+ /* Requires DMA and call-back bindings. */
+ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
+ OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
+ OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+ /* Requires DMA bindings. */
+ OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
+ /* Requires clock name bindings. */
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
+ /* Requires device name bindings. */
+ OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
+ /* Requires clock name and DMA bindings. */
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
+ "ux500-msp-i2s.0", &msp0_platform_data),
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
+ "ux500-msp-i2s.1", &msp1_platform_data),
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
+ "ux500-msp-i2s.2", &msp2_platform_data),
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
+ "ux500-msp-i2s.3", &msp3_platform_data),
+ {},
+};
+
+static const struct of_device_id u8500_local_bus_nodes[] = {
+ /* only create devices below soc node */
+ { .compatible = "stericsson,db8500", },
+ { .compatible = "stericsson,db8500-prcmu", },
+ { .compatible = "simple-bus"},
+ { },
+};
+
+static void __init u8500_init_machine(void)
+{
+ struct device *parent = NULL;
+
+ /* Pinmaps must be in place before devices register */
+ if (of_machine_is_compatible("st-ericsson,mop500"))
+ mop500_pinmaps_init();
+ else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+ snowball_pinmaps_init();
+ else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+ hrefv60_pinmaps_init();
+ else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
+ /* TODO: Add pinmaps for ccu9540 board. */
+
+ /* TODO: Export SoC, USB, cpu-freq and DMA40 */
+ parent = u8500_of_init_devices();
+
+ /* automatically probe child nodes of db8500 device */
+ of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
+}
+
+static const char * stericsson_dt_platform_compat[] = {
+ "st-ericsson,u8500",
+ "st-ericsson,u8540",
+ "st-ericsson,u9500",
+ "st-ericsson,u9540",
+ NULL,
+};
+
+DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
+ .smp = smp_ops(ux500_smp_ops),
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ /* we re-use nomadik timer here */
+ .timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
+ .init_machine = u8500_init_machine,
+ .init_late = NULL,
+ .dt_compat = stericsson_dt_platform_compat,
+MACHINE_END
+
+#endif
#include <mach/setup.h>
#include <mach/devices.h>
+#include "board-mop500.h"
+
void __iomem *_PRCMU_BASE;
/*
void __init ux500_init_late(void)
{
+ mop500_uib_init();
}
static const char * __init ux500_get_machine(void)
static int
do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
- union offset_union offset;
+ union offset_union uninitialized_var(offset);
unsigned long instr = 0, instrptr;
int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs);
unsigned int type;
+++ /dev/null
-if ARCH_MXC
-
-source "arch/arm/plat-mxc/devices/Kconfig"
-
-menu "Freescale MXC Implementations"
-
-choice
- prompt "Freescale CPU family:"
- default ARCH_IMX_V6_V7
-
-config ARCH_IMX_V4_V5
- bool "i.MX1, i.MX21, i.MX25, i.MX27"
- select ARM_PATCH_PHYS_VIRT
- select AUTO_ZRELADDR if !ZBOOT_ROM
- help
- This enables support for systems based on the Freescale i.MX ARMv4
- and ARMv5 SoCs
-
-config ARCH_IMX_V6_V7
- bool "i.MX3, i.MX5, i.MX6"
- select ARM_PATCH_PHYS_VIRT
- select AUTO_ZRELADDR if !ZBOOT_ROM
- select MIGHT_HAVE_CACHE_L2X0
- help
- This enables support for systems based on the Freescale i.MX3, i.MX5
- and i.MX6 family.
-
-endchoice
-
-source "arch/arm/mach-imx/Kconfig"
-
-endmenu
-
-config MXC_IRQ_PRIOR
- bool "Use IRQ priority"
- help
- Select this if you want to use prioritized IRQ handling.
- This feature prevents higher priority ISR to be interrupted
- by lower priority IRQ even IRQF_DISABLED flag is not set.
- This may be useful in embedded applications, where are strong
- requirements for timing.
- Say N here, unless you have a specialized requirement.
-
-config MXC_TZIC
- bool
-
-config MXC_AVIC
- bool
-
-config MXC_DEBUG_BOARD
- bool "Enable MXC debug board(for 3-stack)"
- help
- The debug board is an integral part of the MXC 3-stack(PDK)
- platforms, it can be attached or removed from the peripheral
- board. On debug board, several debug devices(ethernet, UART,
- buttons, LEDs and JTAG) are implemented. Between the MCU and
- these devices, a CPLD is added as a bridge which performs
- data/address de-multiplexing and decode, signal level shift,
- interrupt control and various board functions.
-
-config HAVE_EPIT
- bool
-
-config MXC_USE_EPIT
- bool "Use EPIT instead of GPT"
- depends on HAVE_EPIT
- help
- Use EPIT as the system timer on systems that have it. Normally you
- don't have a reason to do so as the EPIT has the same features and
- uses the same clocks as the GPT. Anyway, on some systems the GPT
- may be in use for other purposes.
-
-config MXC_ULPI
- bool
-
-config ARCH_HAS_RNGA
- bool
-
-config IMX_HAVE_IOMUX_V1
- bool
-
-config ARCH_MXC_IOMUX_V3
- bool
-
-config IRAM_ALLOC
- bool
- select GENERIC_ALLOCATOR
-
-endif
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y := time.o devices.o cpu.o system.o irq-common.o
-
-obj-$(CONFIG_MXC_TZIC) += tzic.o
-obj-$(CONFIG_MXC_AVIC) += avic.o
-
-obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
-obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
-obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
-obj-$(CONFIG_MXC_ULPI) += ulpi.o
-obj-$(CONFIG_MXC_USE_EPIT) += epit.o
-obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
-obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-ifdef CONFIG_SND_IMX_SOC
-obj-y += ssi-fiq.o
-obj-y += ssi-fiq-ksym.o
-endif
-
-obj-y += devices/
+++ /dev/null
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_IRQS_H__
-#define __ASM_ARCH_MXC_IRQS_H__
-
-extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
-
-/* all normal IRQs can be FIQs */
-#define FIQ_START 0
-/* switch between IRQ and FIQ */
-extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
-
-#endif /* __ASM_ARCH_MXC_IRQS_H__ */
+++ /dev/null
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_TIMEX_H__
-#define __ASM_ARCH_MXC_TIMEX_H__
-
-/* Bogus value */
-#define CLOCK_TICK_RATE 12345678
-
-#endif /* __ASM_ARCH_MXC_TIMEX_H__ */
+++ /dev/null
-/*
- * arch/arm/plat-mxc/include/mach/uncompress.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
-#define __ASM_ARCH_MXC_UNCOMPRESS_H__
-
-#define __MXC_BOOT_UNCOMPRESS
-
-#include <asm/mach-types.h>
-
-unsigned long uart_base;
-
-#define UART(x) (*(volatile unsigned long *)(uart_base + (x)))
-
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR 0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. We search for the first enabled
- * port in the most probable order. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-static void putc(int ch)
-{
- if (!uart_base)
- return;
- if (!(UART(UCR1) & UCR1_UARTEN))
- return;
-
- while (!(UART(USR2) & USR2_TXFE))
- barrier();
-
- UART(TXR) = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-#define MX1_UART1_BASE_ADDR 0x00206000
-#define MX25_UART1_BASE_ADDR 0x43f90000
-#define MX2X_UART1_BASE_ADDR 0x1000a000
-#define MX3X_UART1_BASE_ADDR 0x43F90000
-#define MX3X_UART2_BASE_ADDR 0x43F94000
-#define MX3X_UART5_BASE_ADDR 0x43FB4000
-#define MX51_UART1_BASE_ADDR 0x73fbc000
-#define MX50_UART1_BASE_ADDR 0x53fbc000
-#define MX53_UART1_BASE_ADDR 0x53fbc000
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
- switch (arch_id) {
- case MACH_TYPE_MX1ADS:
- case MACH_TYPE_SCB9328:
- uart_base = MX1_UART1_BASE_ADDR;
- break;
- case MACH_TYPE_MX25_3DS:
- uart_base = MX25_UART1_BASE_ADDR;
- break;
- case MACH_TYPE_IMX27LITE:
- case MACH_TYPE_MX27_3DS:
- case MACH_TYPE_MX27ADS:
- case MACH_TYPE_PCM038:
- case MACH_TYPE_MX21ADS:
- case MACH_TYPE_PCA100:
- case MACH_TYPE_MXT_TD60:
- case MACH_TYPE_IMX27IPCAM:
- uart_base = MX2X_UART1_BASE_ADDR;
- break;
- case MACH_TYPE_MX31LITE:
- case MACH_TYPE_ARMADILLO5X0:
- case MACH_TYPE_MX31MOBOARD:
- case MACH_TYPE_QONG:
- case MACH_TYPE_MX31_3DS:
- case MACH_TYPE_PCM037:
- case MACH_TYPE_MX31ADS:
- case MACH_TYPE_MX35_3DS:
- case MACH_TYPE_PCM043:
- case MACH_TYPE_LILLY1131:
- case MACH_TYPE_VPR200:
- case MACH_TYPE_EUKREA_CPUIMX35SD:
- uart_base = MX3X_UART1_BASE_ADDR;
- break;
- case MACH_TYPE_MAGX_ZN5:
- uart_base = MX3X_UART2_BASE_ADDR;
- break;
- case MACH_TYPE_BUG:
- uart_base = MX3X_UART5_BASE_ADDR;
- break;
- case MACH_TYPE_MX51_BABBAGE:
- case MACH_TYPE_EUKREA_CPUIMX51SD:
- case MACH_TYPE_MX51_3DS:
- uart_base = MX51_UART1_BASE_ADDR;
- break;
- case MACH_TYPE_MX50_RDP:
- uart_base = MX50_UART1_BASE_ADDR;
- break;
- case MACH_TYPE_MX53_EVK:
- case MACH_TYPE_MX53_LOCO:
- case MACH_TYPE_MX53_SMD:
- case MACH_TYPE_MX53_ARD:
- uart_base = MX53_UART1_BASE_ADDR;
- break;
- default:
- break;
- }
-}
-
-#define arch_decomp_setup() __arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
-
-#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
#
# Common support
-obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o
+obj-y := sram.o dma.o fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
# omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
# OMAP mailbox framework
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
-obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
+++ /dev/null
-/*
- * linux/arch/arm/plat-omap/clock.c
- *
- * Copyright (C) 2004 - 2008 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-static DEFINE_SPINLOCK(clockfw_lock);
-
-static struct clk_functions *arch_clock;
-
-/*
- * Standard clock functions defined in include/linux/clk.h
- */
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
- int ret;
-
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- if (!arch_clock || !arch_clock->clk_enable)
- return -EINVAL;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = arch_clock->clk_enable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- if (clk == NULL || IS_ERR(clk))
- return;
-
- if (!arch_clock || !arch_clock->clk_disable)
- return;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (clk->usecount == 0) {
- pr_err("Trying disable clock %s with 0 usecount\n",
- clk->name);
- WARN_ON(1);
- goto out;
- }
-
- arch_clock->clk_disable(clk);
-
-out:
- spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long flags;
- unsigned long ret;
-
- if (clk == NULL || IS_ERR(clk))
- return 0;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = clk->rate;
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*
- * Optional clock functions defined in include/linux/clk.h
- */
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- long ret;
-
- if (clk == NULL || IS_ERR(clk))
- return 0;
-
- if (!arch_clock || !arch_clock->clk_round_rate)
- return 0;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = arch_clock->clk_round_rate(clk, rate);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (clk == NULL || IS_ERR(clk))
- return ret;
-
- if (!arch_clock || !arch_clock->clk_set_rate)
- return ret;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = arch_clock->clk_set_rate(clk, rate);
- if (ret == 0)
- propagate_rate(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
- return ret;
-
- if (!arch_clock || !arch_clock->clk_set_parent)
- return ret;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (clk->usecount == 0) {
- ret = arch_clock->clk_set_parent(clk, parent);
- if (ret == 0)
- propagate_rate(clk);
- } else
- ret = -EBUSY;
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-/*
- * OMAP specific clock functions shared between omap1 and omap2
- */
-
-int __initdata mpurate;
-
-/*
- * By default we use the rate set by the bootloader.
- * You can override this with mpurate= cmdline option.
- */
-static int __init omap_clk_setup(char *str)
-{
- get_option(&str, &mpurate);
-
- if (!mpurate)
- return 1;
-
- if (mpurate < 1000)
- mpurate *= 1000000;
-
- return 1;
-}
-__setup("mpurate=", omap_clk_setup);
-
-/* Used for clocks that always have same value as the parent clock */
-unsigned long followparent_recalc(struct clk *clk)
-{
- return clk->parent->rate;
-}
-
-/*
- * Used for clocks that have the same value as the parent clock,
- * divided by some factor
- */
-unsigned long omap_fixed_divisor_recalc(struct clk *clk)
-{
- WARN_ON(!clk->fixed_div);
-
- return clk->parent->rate / clk->fixed_div;
-}
-
-void clk_reparent(struct clk *child, struct clk *parent)
-{
- list_del_init(&child->sibling);
- if (parent)
- list_add(&child->sibling, &parent->children);
- child->parent = parent;
-
- /* now do the debugfs renaming to reattach the child
- to the proper parent */
-}
-
-/* Propagate rate to children */
-void propagate_rate(struct clk *tclk)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &tclk->children, sibling) {
- if (clkp->recalc)
- clkp->rate = clkp->recalc(clkp);
- propagate_rate(clkp);
- }
-}
-
-static LIST_HEAD(root_clks);
-
-/**
- * recalculate_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- * Called at init.
- */
-void recalculate_root_clocks(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &root_clks, sibling) {
- if (clkp->recalc)
- clkp->rate = clkp->recalc(clkp);
- propagate_rate(clkp);
- }
-}
-
-/**
- * clk_preinit - initialize any fields in the struct clk before clk init
- * @clk: struct clk * to initialize
- *
- * Initialize any struct clk fields needed before normal clk initialization
- * can run. No return value.
- */
-void clk_preinit(struct clk *clk)
-{
- INIT_LIST_HEAD(&clk->children);
-}
-
-int clk_register(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- /*
- * trap out already registered clocks
- */
- if (clk->node.next || clk->node.prev)
- return 0;
-
- mutex_lock(&clocks_mutex);
- if (clk->parent)
- list_add(&clk->sibling, &clk->parent->children);
- else
- list_add(&clk->sibling, &root_clks);
-
- list_add(&clk->node, &clocks);
- if (clk->init)
- clk->init(clk);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
-
- mutex_lock(&clocks_mutex);
- list_del(&clk->sibling);
- list_del(&clk->node);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-void clk_enable_init_clocks(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &clocks, node) {
- if (clkp->flags & ENABLE_ON_INIT)
- clk_enable(clkp);
- }
-}
-
-int omap_clk_enable_autoidle_all(void)
-{
- struct clk *c;
- unsigned long flags;
-
- spin_lock_irqsave(&clockfw_lock, flags);
-
- list_for_each_entry(c, &clocks, node)
- if (c->ops->allow_idle)
- c->ops->allow_idle(c);
-
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return 0;
-}
-
-int omap_clk_disable_autoidle_all(void)
-{
- struct clk *c;
- unsigned long flags;
-
- spin_lock_irqsave(&clockfw_lock, flags);
-
- list_for_each_entry(c, &clocks, node)
- if (c->ops->deny_idle)
- c->ops->deny_idle(c);
-
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return 0;
-}
-
-/*
- * Low level helpers
- */
-static int clkll_enable_null(struct clk *clk)
-{
- return 0;
-}
-
-static void clkll_disable_null(struct clk *clk)
-{
-}
-
-const struct clkops clkops_null = {
- .enable = clkll_enable_null,
- .disable = clkll_disable_null,
-};
-
-/*
- * Dummy clock
- *
- * Used for clock aliases that are needed on some OMAPs, but not others
- */
-struct clk dummy_ck = {
- .name = "dummy",
- .ops = &clkops_null,
-};
-
-/*
- *
- */
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Disable any unused clocks left on by the bootloader
- */
-static int __init clk_disable_unused(void)
-{
- struct clk *ck;
- unsigned long flags;
-
- if (!arch_clock || !arch_clock->clk_disable_unused)
- return 0;
-
- pr_info("clock: disabling unused clocks to save power\n");
-
- spin_lock_irqsave(&clockfw_lock, flags);
- list_for_each_entry(ck, &clocks, node) {
- if (ck->ops == &clkops_null)
- continue;
-
- if (ck->usecount > 0 || !ck->enable_reg)
- continue;
-
- arch_clock->clk_disable_unused(ck);
- }
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return 0;
-}
-late_initcall(clk_disable_unused);
-late_initcall(omap_clk_enable_autoidle_all);
-#endif
-
-int __init clk_init(struct clk_functions * custom_clocks)
-{
- if (!custom_clocks) {
- pr_err("No custom clock functions registered\n");
- BUG();
- }
-
- arch_clock = custom_clocks;
-
- return 0;
-}
-
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-/*
- * debugfs support to trace clock tree hierarchy and attributes
- */
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static struct dentry *clk_debugfs_root;
-
-static int clk_dbg_show_summary(struct seq_file *s, void *unused)
-{
- struct clk *c;
- struct clk *pa;
-
- mutex_lock(&clocks_mutex);
- seq_printf(s, "%-30s %-30s %-10s %s\n",
- "clock-name", "parent-name", "rate", "use-count");
-
- list_for_each_entry(c, &clocks, node) {
- pa = c->parent;
- seq_printf(s, "%-30s %-30s %-10lu %d\n",
- c->name, pa ? pa->name : "none", c->rate, c->usecount);
- }
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-
-static int clk_dbg_open(struct inode *inode, struct file *file)
-{
- return single_open(file, clk_dbg_show_summary, inode->i_private);
-}
-
-static const struct file_operations debug_clock_fops = {
- .open = clk_dbg_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int clk_debugfs_register_one(struct clk *c)
-{
- int err;
- struct dentry *d;
- struct clk *pa = c->parent;
-
- d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
- if (!d)
- return -ENOMEM;
- c->dent = d;
-
- d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- return 0;
-
-err_out:
- debugfs_remove_recursive(c->dent);
- return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
- int err;
- struct clk *pa = c->parent;
-
- if (pa && !pa->dent) {
- err = clk_debugfs_register(pa);
- if (err)
- return err;
- }
-
- if (!c->dent) {
- err = clk_debugfs_register_one(c);
- if (err)
- return err;
- }
- return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
- struct clk *c;
- struct dentry *d;
- int err;
-
- d = debugfs_create_dir("clock", NULL);
- if (!d)
- return -ENOMEM;
- clk_debugfs_root = d;
-
- list_for_each_entry(c, &clocks, node) {
- err = clk_debugfs_register(c);
- if (err)
- goto err_out;
- }
-
- d = debugfs_create_file("summary", S_IRUGO,
- d, NULL, &debug_clock_fops);
- if (!d)
- return -ENOMEM;
-
- return 0;
-err_out:
- debugfs_remove_recursive(clk_debugfs_root);
- return err;
-}
-late_initcall(clk_debugfs_init);
-
-#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
+++ /dev/null
-/*
- * linux/arch/arm/plat-omap/common.c
- *
- * Code common to all OMAP machines.
- * The file is created by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/common.h>
-#include <plat/vram.h>
-#include <linux/platform_data/dsp-omap.h>
-#include <plat/dma.h>
-
-#include <plat/omap-secure.h>
-
-void __init omap_reserve(void)
-{
- omap_vram_reserve_sdram_memblock();
- omap_dsp_reserve_sdram_memblock();
- omap_secure_ram_reserve_memblock();
- omap_barrier_reserve_memblock();
-}
-
-void __init omap_init_consistent_dma_size(void)
-{
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
- init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
-#endif
-}
-
-/*
- * Stub function for OMAP2 so that common files
- * continue to build when custom builds are used
- */
-int __weak omap_secure_ram_reserve_memblock(void)
-{
- return 0;
-}
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
-#include <plat/common.h>
-#include <plat/clock.h>
-
/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
#define OMAP2_32KSYNCNT_REV_OFF 0x0
#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30)
#include <linux/io.h>
#include <linux/smc91x.h>
-#include <mach/hardware.h>
-#include "../mach-omap2/debug-devices.h"
+#include <plat/debug-devices.h>
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2.
#include <linux/platform_data/gpio-omap.h>
#include <linux/slab.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <plat/fpga.h>
-
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
* debug board (all green), accessed through FPGA registers.
*/
+/* NOTE: most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+ /* offset 0x00 */
+ u16 smc91x[8];
+ /* offset 0x10 */
+ u16 fpga_rev;
+ u16 board_rev;
+ u16 gpio_outputs;
+ u16 leds;
+ /* offset 0x18 */
+ u16 misc_inputs;
+ u16 lan_status;
+ u16 lan_reset;
+ u16 reserved0;
+ /* offset 0x20 */
+ u16 ps2_data;
+ u16 ps2_ctrl;
+ /* plus also 4 rs232 ports ... */
+};
+
static struct h2p2_dbg_fpga __iomem *fpga;
static u16 fpga_led_state;
#include <linux/slab.h>
#include <linux/delay.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
/*
* MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
#define omap_writel(val, reg) do {} while (0)
#endif
+#ifdef CONFIG_ARCH_OMAP1
void omap_set_dma_priority(int lch, int dst_port, int priority)
{
unsigned long reg;
u32 l;
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
switch (dst_port) {
case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
reg = OMAP_TC_OCPT1_PRIOR;
l |= (priority & 0xf) << 8;
omap_writel(l, reg);
}
+}
+#endif
- if (cpu_class_is_omap2()) {
- u32 ccr;
+#ifdef CONFIG_ARCH_OMAP2PLUS
+void omap_set_dma_priority(int lch, int dst_port, int priority)
+{
+ u32 ccr;
- ccr = p->dma_read(CCR, lch);
- if (priority)
- ccr |= (1 << 6);
- else
- ccr &= ~(1 << 6);
- p->dma_write(ccr, CCR, lch);
- }
+ ccr = p->dma_read(CCR, lch);
+ if (priority)
+ ccr |= (1 << 6);
+ else
+ ccr &= ~(1 << 6);
+ p->dma_write(ccr, CCR, lch);
}
+#endif
EXPORT_SYMBOL(omap_set_dma_priority);
void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
l |= data_type;
p->dma_write(l, CSDP, lch);
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
u16 ccr;
ccr = p->dma_read(CCR, lch);
p->dma_write(ccr, CCR2, lch);
}
- if (cpu_class_is_omap2() && dma_trigger) {
+ if (dma_omap2plus() && dma_trigger) {
u32 val;
val = p->dma_read(CCR, lch);
{
BUG_ON(omap_dma_in_1510_mode());
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
u16 w;
w = p->dma_read(CCR2, lch);
p->dma_write(w, LCH_CTRL, lch);
}
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
u32 val;
val = p->dma_read(CCR, lch);
void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
{
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
u32 csdp;
csdp = p->dma_read(CSDP, lch);
void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
{
- if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
+ if (dma_omap1() && !dma_omap15xx()) {
u32 l;
l = p->dma_read(LCH_CTRL, lch);
{
u32 l;
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
u16 w;
w = p->dma_read(CSDP, lch);
void omap_set_dma_src_index(int lch, int eidx, int fidx)
{
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
return;
p->dma_write(eidx, CSEI, lch);
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
burst = 0x1;
else
burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
burst = 0x2;
break;
}
* fall through
*/
case OMAP_DMA_DATA_BURST_16:
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
burst = 0x3;
break;
}
{
u32 l;
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
l = p->dma_read(CSDP, lch);
l &= ~(0x1f << 9);
l |= dest_port << 9;
void omap_set_dma_dest_index(int lch, int eidx, int fidx)
{
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
return;
p->dma_write(eidx, CDEI, lch);
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
burst = 0x1;
else
burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
burst = 0x2;
else
burst = 0x3;
break;
case OMAP_DMA_DATA_BURST_16:
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
burst = 0x3;
break;
}
static inline void omap_enable_channel_irq(int lch)
{
/* Clear CSR */
- if (cpu_class_is_omap1())
+ if (dma_omap1())
p->dma_read(CSR, lch);
else
p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
/* disable channel interrupts */
p->dma_write(0, CICR, lch);
/* Clear CSR */
- if (cpu_class_is_omap1())
+ if (dma_omap1())
p->dma_read(CSR, lch);
else
p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
l = p->dma_read(CLNK_CTRL, lch);
- if (cpu_class_is_omap1())
+ if (dma_omap1())
l &= ~(1 << 14);
/* Set the ENABLE_LNK bits */
l = dma_chan[lch].next_lch | (1 << 15);
#ifndef CONFIG_ARCH_OMAP1
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
if (dma_chan[lch].next_linked_ch != -1)
l = dma_chan[lch].next_linked_ch | (1 << 15);
#endif
/* Disable interrupts */
omap_disable_channel_irq(lch);
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
/* Set the STOP_LNK bit */
l |= 1 << 14;
}
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
/* Clear the ENABLE_LNK bit */
l &= ~(1 << 15);
}
u32 val;
unsigned long flags;
- if (!cpu_class_is_omap2())
+ if (dma_omap1())
return;
spin_lock_irqsave(&dma_chan_lock, flags);
u32 val;
unsigned long flags;
- if (!cpu_class_is_omap2())
+ if (dma_omap1())
return;
spin_lock_irqsave(&dma_chan_lock, flags);
if (p->clear_lch_regs)
p->clear_lch_regs(free_ch);
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
omap_clear_dma(free_ch);
spin_unlock_irqrestore(&dma_chan_lock, flags);
chan->flags = 0;
#ifndef CONFIG_ARCH_OMAP1
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
chan->chain_id = -1;
chan->next_linked_ch = -1;
}
chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
- if (cpu_class_is_omap1())
+ if (dma_omap1())
chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
- else if (cpu_class_is_omap2())
+ else if (dma_omap2plus())
chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
OMAP2_DMA_TRANS_ERR_IRQ;
- if (cpu_is_omap16xx()) {
+ if (dma_omap16xx()) {
/* If the sync device is set, configure it dynamically. */
if (dev_id != 0) {
set_gdma_dev(free_ch + 1, dev_id);
* id.
*/
p->dma_write(dev_id | (1 << 10), CCR, free_ch);
- } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
+ } else if (dma_omap1()) {
p->dma_write(dev_id, CCR, free_ch);
}
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
omap_enable_channel_irq(free_ch);
omap2_enable_irq_lch(free_ch);
}
}
/* Disable interrupt for logical channel */
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
omap2_disable_irq_lch(lch);
/* Disable all DMA interrupts for the channel. */
p->dma_write(0, CCR, lch);
/* Clear registers */
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
omap_clear_dma(lch);
spin_lock_irqsave(&dma_chan_lock, flags);
{
u32 reg;
- if (!cpu_class_is_omap2()) {
+ if (dma_omap1()) {
printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
return;
}
}
l = p->dma_read(CCR, lch);
l &= ~((1 << 6) | (1 << 26));
- if (cpu_class_is_omap2() && !cpu_is_omap242x())
+ if (d->dev_caps & IS_RW_PRIORITY)
l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
else
l |= ((read_prio & 0x1) << 6);
* The CPC/CDAC register needs to be initialized to zero
* before starting dma transfer.
*/
- if (cpu_is_omap15xx())
+ if (dma_omap15xx())
p->dma_write(0, CPC, lch);
else
p->dma_write(0, CDAC, lch);
{
dma_addr_t offset = 0;
- if (cpu_is_omap15xx())
+ if (dma_omap15xx())
offset = p->dma_read(CPC, lch);
else
offset = p->dma_read(CSAC, lch);
if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0)
offset = p->dma_read(CSAC, lch);
- if (!cpu_is_omap15xx()) {
+ if (!dma_omap15xx()) {
/*
* CDAC == 0 indicates that the DMA transfer on the channel has
* not been started (no data has been transferred so far).
offset = p->dma_read(CSSA, lch);
}
- if (cpu_class_is_omap1())
+ if (dma_omap1())
offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
return offset;
{
dma_addr_t offset = 0;
- if (cpu_is_omap15xx())
+ if (dma_omap15xx())
offset = p->dma_read(CPC, lch);
else
offset = p->dma_read(CDAC, lch);
* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
* read before the DMA controller finished disabling the channel.
*/
- if (!cpu_is_omap15xx() && offset == 0) {
+ if (!dma_omap15xx() && offset == 0) {
offset = p->dma_read(CDAC, lch);
/*
* CDAC == 0 indicates that the DMA transfer on the channel has
offset = p->dma_read(CDSA, lch);
}
- if (cpu_class_is_omap1())
+ if (dma_omap1())
offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
return offset;
{
int lch;
- if (cpu_class_is_omap1())
+ if (dma_omap1())
if (omap_lcd_dma_running())
return 1;
dma_chan = d->chan;
enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
dma_lch_count, GFP_KERNEL);
if (!dma_linked_lch) {
spin_lock_init(&dma_chan_lock);
for (ch = 0; ch < dma_chan_count; ch++) {
omap_clear_dma(ch);
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
omap2_disable_irq_lch(ch);
dma_chan[ch].dev_id = -1;
if (ch >= 6 && enable_1510_mode)
continue;
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
/*
* request_irq() doesn't like dev_id (ie. ch) being
* zero, so we have to kludge around this.
}
}
- if (cpu_class_is_omap2() && !cpu_is_omap242x())
+ if (d->dev_caps & IS_RW_PRIORITY)
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
strcpy(irq_name, "0");
dma_irq = platform_get_irq_byname(pdev, irq_name);
if (dma_irq < 0) {
}
}
- /* reserve dma channels 0 and 1 in high security devices */
- if (cpu_is_omap34xx() &&
- (omap_type() != OMAP2_DEVICE_TYPE_GP)) {
+ /* reserve dma channels 0 and 1 in high security devices on 34xx */
+ if (d->dev_caps & HS_CHANNELS_RESERVED) {
pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
dma_chan[0].dev_id = 0;
dma_chan[1].dev_id = 1;
{
int dma_irq;
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
char irq_name[4];
strcpy(irq_name, "0");
dma_irq = platform_get_irq_byname(pdev, irq_name);
#include <linux/device.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
-
-#include <mach/hardware.h>
static u32 omap_reserved_systimers;
static LIST_HEAD(omap_timer_list);
unsigned long flags;
int ret = 0;
+ /* Requesting timer by ID is not supported when device tree is used */
+ if (of_have_populated_dt()) {
+ pr_warn("%s: Please use omap_dm_timer_request_by_cap()\n",
+ __func__);
+ return NULL;
+ }
+
spin_lock_irqsave(&dm_timer_lock, flags);
list_for_each_entry(t, &omap_timer_list, node) {
if (t->pdev->id == id && !t->reserved) {
}
EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
+/**
+ * omap_dm_timer_request_by_cap - Request a timer by capability
+ * @cap: Bit mask of capabilities to match
+ *
+ * Find a timer based upon capabilities bit mask. Callers of this function
+ * should use the definitions found in the plat/dmtimer.h file under the
+ * comment "timer capabilities used in hwmod database". Returns pointer to
+ * timer handle on success and a NULL pointer on failure.
+ */
+struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap)
+{
+ struct omap_dm_timer *timer = NULL, *t;
+ unsigned long flags;
+
+ if (!cap)
+ return NULL;
+
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(t, &omap_timer_list, node) {
+ if ((!t->reserved) && ((t->capability & cap) == cap)) {
+ /*
+ * If timer is not NULL, we have already found one timer
+ * but it was not an exact match because it had more
+ * capabilites that what was required. Therefore,
+ * unreserve the last timer found and see if this one
+ * is a better match.
+ */
+ if (timer)
+ timer->reserved = 0;
+
+ timer = t;
+ timer->reserved = 1;
+
+ /* Exit loop early if we find an exact match */
+ if (t->capability == cap)
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ if (timer && omap_dm_timer_prepare(timer)) {
+ timer->reserved = 0;
+ timer = NULL;
+ }
+
+ if (!timer)
+ pr_debug("%s: timer request failed!\n", __func__);
+
+ return timer;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap);
+
int omap_dm_timer_free(struct omap_dm_timer *timer)
{
if (unlikely(!timer))
EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
#if defined(CONFIG_ARCH_OMAP1)
-
+#include <mach/hardware.h>
/**
* omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
* @inputmask: current value of idlect mask
omap_dm_timer_enable(timer);
if (!(timer->capability & OMAP_TIMER_ALWON)) {
- if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+ if (timer->get_context_loss_count &&
+ timer->get_context_loss_count(&timer->pdev->dev) !=
timer->ctx_loss_count)
omap_timer_restore_context(timer);
}
__omap_dm_timer_stop(timer, timer->posted, rate);
- if (!(timer->capability & OMAP_TIMER_ALWON))
- timer->ctx_loss_count =
- omap_pm_get_dev_context_loss_count(&timer->pdev->dev);
+ if (!(timer->capability & OMAP_TIMER_ALWON)) {
+ if (timer->get_context_loss_count)
+ timer->ctx_loss_count =
+ timer->get_context_loss_count(&timer->pdev->dev);
+ }
/*
* Since the register values are computed and written within
* use the clock framework to set the parent clock. To be removed
* once OMAP1 migrated to using clock framework for dmtimers
*/
- if (pdata->set_timer_src)
+ if (pdata && pdata->set_timer_src)
return pdata->set_timer_src(timer->pdev, source);
fclk = clk_get(&timer->pdev->dev, "fck");
omap_dm_timer_enable(timer);
if (!(timer->capability & OMAP_TIMER_ALWON)) {
- if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+ if (timer->get_context_loss_count &&
+ timer->get_context_loss_count(&timer->pdev->dev) !=
timer->ctx_loss_count)
omap_timer_restore_context(timer);
}
struct device *dev = &pdev->dev;
struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
- if (!pdata) {
+ if (!pdata && !dev->of_node) {
dev_err(dev, "%s: no platform data.\n", __func__);
return -ENODEV;
}
return -ENOMEM;
}
- timer->id = pdev->id;
+ if (dev->of_node) {
+ if (of_find_property(dev->of_node, "ti,timer-alwon", NULL))
+ timer->capability |= OMAP_TIMER_ALWON;
+ if (of_find_property(dev->of_node, "ti,timer-dsp", NULL))
+ timer->capability |= OMAP_TIMER_HAS_DSP_IRQ;
+ if (of_find_property(dev->of_node, "ti,timer-pwm", NULL))
+ timer->capability |= OMAP_TIMER_HAS_PWM;
+ if (of_find_property(dev->of_node, "ti,timer-secure", NULL))
+ timer->capability |= OMAP_TIMER_SECURE;
+ } else {
+ timer->id = pdev->id;
+ timer->capability = pdata->timer_capability;
+ timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
+ timer->get_context_loss_count = pdata->get_context_loss_count;
+ }
+
timer->irq = irq->start;
- timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
timer->pdev = pdev;
- timer->capability = pdata->timer_capability;
/* Skip pm_runtime_enable for OMAP1 */
if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
spin_lock_irqsave(&dm_timer_lock, flags);
list_for_each_entry(timer, &omap_timer_list, node)
- if (timer->pdev->id == pdev->id) {
+ if (!strcmp(dev_name(&timer->pdev->dev),
+ dev_name(&pdev->dev))) {
list_del(&timer->node);
ret = 0;
break;
return ret;
}
+static const struct of_device_id omap_timer_match[] = {
+ { .compatible = "ti,omap2-timer", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_timer_match);
+
static struct platform_driver omap_dm_timer_driver = {
.probe = omap_dm_timer_probe,
.remove = __devexit_p(omap_dm_timer_remove),
.driver = {
.name = "omap_timer",
+ .of_match_table = of_match_ptr(omap_timer_match),
},
};
#include <linux/io.h>
#include <linux/omapfb.h>
-#include <mach/hardware.h>
#include <asm/mach/map.h>
+#include <plat/cpu.h>
+
+#ifdef CONFIG_OMAP2_VRFB
+
+/*
+ * The first memory resource is the register region for VRFB,
+ * the rest are VRFB virtual memory areas for each VRFB context.
+ */
+
+static const struct resource omap2_vrfb_resources[] = {
+ DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"),
+ DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
+ DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
+ DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
+ DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
+};
+
+static const struct resource omap3_vrfb_resources[] = {
+ DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"),
+ DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
+ DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
+ DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
+ DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
+ DEFINE_RES_MEM_NAMED(0xe0000000u, 0x4000000, "vrfb-area-4"),
+ DEFINE_RES_MEM_NAMED(0xe4000000u, 0x4000000, "vrfb-area-5"),
+ DEFINE_RES_MEM_NAMED(0xe8000000u, 0x4000000, "vrfb-area-6"),
+ DEFINE_RES_MEM_NAMED(0xec000000u, 0x4000000, "vrfb-area-7"),
+ DEFINE_RES_MEM_NAMED(0xf0000000u, 0x4000000, "vrfb-area-8"),
+ DEFINE_RES_MEM_NAMED(0xf4000000u, 0x4000000, "vrfb-area-9"),
+ DEFINE_RES_MEM_NAMED(0xf8000000u, 0x4000000, "vrfb-area-10"),
+ DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"),
+};
+
+static int __init omap_init_vrfb(void)
+{
+ struct platform_device *pdev;
+ const struct resource *res;
+ unsigned int num_res;
+
+ if (cpu_is_omap24xx()) {
+ res = omap2_vrfb_resources;
+ num_res = ARRAY_SIZE(omap2_vrfb_resources);
+ } else if (cpu_is_omap34xx()) {
+ res = omap3_vrfb_resources;
+ num_res = ARRAY_SIZE(omap3_vrfb_resources);
+ } else {
+ return 0;
+ }
+
+ pdev = platform_device_register_resndata(NULL, "omapvrfb", -1,
+ res, num_res, NULL, 0);
+
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+ else
+ return 0;
+}
+
+arch_initcall(omap_init_vrfb);
+#endif
+
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
static bool omapfb_lcd_configured;
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
+#include <linux/i2c-omap.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <mach/irqs.h>
#include <plat/i2c.h>
-#include <plat/omap_device.h>
-#define OMAP_I2C_SIZE 0x3f
-#define OMAP1_I2C_BASE 0xfffb3800
-#define OMAP1_INT_I2C (32 + 4)
-
-static const char name[] = "omap_i2c";
-
-#define I2C_RESOURCE_BUILDER(base, irq) \
- { \
- .start = (base), \
- .end = (base) + OMAP_I2C_SIZE, \
- .flags = IORESOURCE_MEM, \
- }, \
- { \
- .start = (irq), \
- .flags = IORESOURCE_IRQ, \
- },
-
-static struct resource i2c_resources[][2] = {
- { I2C_RESOURCE_BUILDER(0, 0) },
-};
-
-#define I2C_DEV_BUILDER(bus_id, res, data) \
- { \
- .id = (bus_id), \
- .name = name, \
- .num_resources = ARRAY_SIZE(res), \
- .resource = (res), \
- .dev = { \
- .platform_data = (data), \
- }, \
- }
-
-#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16
#define OMAP_I2C_MAX_CONTROLLERS 4
static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
-static struct platform_device omap_i2c_devices[] = {
- I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
-};
#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
-static int __init omap_i2c_nr_ports(void)
-{
- int ports = 0;
-
- if (cpu_class_is_omap1())
- ports = 1;
- else if (cpu_is_omap24xx())
- ports = 2;
- else if (cpu_is_omap34xx())
- ports = 3;
- else if (cpu_is_omap44xx())
- ports = 4;
-
- return ports;
-}
-
-static inline int omap1_i2c_add_bus(int bus_id)
-{
- struct platform_device *pdev;
- struct omap_i2c_bus_platform_data *pdata;
- struct resource *res;
-
- omap1_i2c_mux_pins(bus_id);
-
- pdev = &omap_i2c_devices[bus_id - 1];
- res = pdev->resource;
- res[0].start = OMAP1_I2C_BASE;
- res[0].end = res[0].start + OMAP_I2C_SIZE;
- res[1].start = OMAP1_INT_I2C;
- pdata = &i2c_pdata[bus_id - 1];
-
- /* all OMAP1 have IP version 1 register set */
- pdata->rev = OMAP_I2C_IP_VERSION_1;
-
- /* all OMAP1 I2C are implemented like this */
- pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
- OMAP_I2C_FLAG_SIMPLE_CLOCK |
- OMAP_I2C_FLAG_16BIT_DATA_REG |
- OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
-
- /* how the cpu bus is wired up differs for 7xx only */
-
- if (cpu_is_omap7xx())
- pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
- else
- pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
-
- return platform_device_register(pdev);
-}
-
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-static inline int omap2_i2c_add_bus(int bus_id)
-{
- int l;
- struct omap_hwmod *oh;
- struct platform_device *pdev;
- char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
- struct omap_i2c_bus_platform_data *pdata;
- struct omap_i2c_dev_attr *dev_attr;
-
- omap2_i2c_mux_pins(bus_id);
-
- l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
- WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
- "String buffer overflow in I2C%d device setup\n", bus_id);
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return -EEXIST;
- }
-
- pdata = &i2c_pdata[bus_id - 1];
- /*
- * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
- * use, and functionality implementation flags, up to the OMAP I2C
- * driver via platform data
- */
- pdata->rev = oh->class->rev;
-
- dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
- pdata->flags = dev_attr->flags;
-
- pdev = omap_device_build(name, bus_id, oh, pdata,
- sizeof(struct omap_i2c_bus_platform_data),
- NULL, 0, 0);
- WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
-
- return PTR_RET(pdev);
-}
-#else
-static inline int omap2_i2c_add_bus(int bus_id)
-{
- return 0;
-}
-#endif
-
-static int __init omap_i2c_add_bus(int bus_id)
-{
- if (cpu_class_is_omap1())
- return omap1_i2c_add_bus(bus_id);
- else
- return omap2_i2c_add_bus(bus_id);
-}
-
/**
* omap_i2c_bus_setup - Process command line options for the I2C bus speed
* @str: String of options
*/
static int __init omap_i2c_bus_setup(char *str)
{
- int ports;
int ints[3];
- ports = omap_i2c_nr_ports();
get_options(str, 3, ints);
- if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
+ if (ints[0] < 2 || ints[1] < 1 ||
+ ints[1] > OMAP_I2C_MAX_CONTROLLERS)
return 0;
i2c_pdata[ints[1] - 1].clkrate = ints[2];
i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
- err = omap_i2c_add_bus(i + 1);
+ err = omap_i2c_add_bus(&i2c_pdata[i], i + 1);
if (err)
goto out;
}
{
int err;
- BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports());
+ BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS);
if (info) {
err = i2c_register_board_info(bus_id, info, len);
i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
- return omap_i2c_add_bus(bus_id);
+ return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id);
}
/*
- * arch/arm/plat-omap/include/mach/dma.h
+ * OMAP DMA handling defines and function
*
* Copyright (C) 2003 Nokia Corporation
* Author: Juha Yrjölä <juha.yrjola@nokia.com>
#include <linux/platform_device.h>
-/*
- * TODO: These dma channel defines should go away once all
- * the omap drivers hwmod adapted.
- */
-
-/* Move omap4 specific defines to dma-44xx.h */
-#include "dma-44xx.h"
-
#define INT_DMA_LCD 25
-/* DMA channels for omap1 */
-#define OMAP_DMA_NO_DEVICE 0
-#define OMAP_DMA_MCSI1_TX 1
-#define OMAP_DMA_MCSI1_RX 2
-#define OMAP_DMA_I2C_RX 3
-#define OMAP_DMA_I2C_TX 4
-#define OMAP_DMA_EXT_NDMA_REQ 5
-#define OMAP_DMA_EXT_NDMA_REQ2 6
-#define OMAP_DMA_UWIRE_TX 7
-#define OMAP_DMA_MCBSP1_TX 8
-#define OMAP_DMA_MCBSP1_RX 9
-#define OMAP_DMA_MCBSP3_TX 10
-#define OMAP_DMA_MCBSP3_RX 11
-#define OMAP_DMA_UART1_TX 12
-#define OMAP_DMA_UART1_RX 13
-#define OMAP_DMA_UART2_TX 14
-#define OMAP_DMA_UART2_RX 15
-#define OMAP_DMA_MCBSP2_TX 16
-#define OMAP_DMA_MCBSP2_RX 17
-#define OMAP_DMA_UART3_TX 18
-#define OMAP_DMA_UART3_RX 19
-#define OMAP_DMA_CAMERA_IF_RX 20
-#define OMAP_DMA_MMC_TX 21
-#define OMAP_DMA_MMC_RX 22
-#define OMAP_DMA_NAND 23
-#define OMAP_DMA_IRQ_LCD_LINE 24
-#define OMAP_DMA_MEMORY_STICK 25
-#define OMAP_DMA_USB_W2FC_RX0 26
-#define OMAP_DMA_USB_W2FC_RX1 27
-#define OMAP_DMA_USB_W2FC_RX2 28
-#define OMAP_DMA_USB_W2FC_TX0 29
-#define OMAP_DMA_USB_W2FC_TX1 30
-#define OMAP_DMA_USB_W2FC_TX2 31
-
-/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN 32
-#define OMAP_DMA_SPI_TX 33
-#define OMAP_DMA_SPI_RX 34
-#define OMAP_DMA_CRYPTO_HASH 35
-#define OMAP_DMA_CCP_ATTN 36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0 38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0 39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1 40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1 41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2 42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2 43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3 44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3 45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4 46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4 47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5 48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5 49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6 50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6 51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7 52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7 53
-#define OMAP_DMA_MMC2_TX 54
-#define OMAP_DMA_MMC2_RX 55
-#define OMAP_DMA_CRYPTO_DES_OUT 56
-
-/* DMA channels for 24xx */
-#define OMAP24XX_DMA_NO_DEVICE 0
-#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */
-#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
-#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
-#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
-#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */
-#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */
-#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */
-#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */
-#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */
-#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
-#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
-#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
-#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */
-#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
-#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
-#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
-#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */
-#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */
-#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
-#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
-#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
-#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
-#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
-#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
-#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
-#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
-#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */
-#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
-#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
-#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */
-#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */
-#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */
-#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */
-#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */
-#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */
-#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
-#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
-#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */
-#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */
-#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */
-#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */
-#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */
-#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */
-#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */
-#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
-#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */
-#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */
-#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */
-#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */
-#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */
-#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */
-#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */
-#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */
-#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */
-#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */
-#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */
-#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
-#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */
-#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */
-#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */
-#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */
-#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */
-#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */
-#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */
-#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
-#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
-#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */
-#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */
-#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */
-#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */
-#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */
-#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */
-#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
-#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
-
-#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */
-#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */
-
-/* Only for AM35xx */
-#define AM35XX_DMA_UART4_TX 54
-#define AM35XX_DMA_UART4_RX 55
-
-/*----------------------------------------------------------------------------*/
-
#define OMAP1_DMA_TOUT_IRQ (1 << 0)
#define OMAP_DMA_DROP_IRQ (1 << 1)
#define OMAP_DMA_HALF_IRQ (1 << 2)
#define SRC_PORT BIT(0x7)
#define DST_PORT BIT(0x8)
#define SRC_INDEX BIT(0x9)
-#define DST_INDEX BIT(0xA)
-#define IS_BURST_ONLY4 BIT(0xB)
-#define CLEAR_CSR_ON_READ BIT(0xC)
-#define IS_WORD_16 BIT(0xD)
+#define DST_INDEX BIT(0xa)
+#define IS_BURST_ONLY4 BIT(0xb)
+#define CLEAR_CSR_ON_READ BIT(0xc)
+#define IS_WORD_16 BIT(0xd)
+#define ENABLE_16XX_MODE BIT(0xe)
+#define HS_CHANNELS_RESERVED BIT(0xf)
/* Defines for DMA Capabilities */
#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18)
u32 (*dma_read)(int reg, int lch);
};
-extern void __init omap_init_consistent_dma_size(void);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define dma_omap2plus() 1
+#else
+#define dma_omap2plus() 0
+#endif
+#define dma_omap1() (!dma_omap2plus())
+#define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE)))
+#define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE)))
+
extern void omap_set_dma_priority(int lch, int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
void (*callback)(int lch, u16 ch_status, void *data),
+++ /dev/null
-/*
- * clkdev <-> OMAP integration
- *
- * Russell King <linux@arm.linux.org.uk>
- *
- */
-
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-
-#include <linux/clkdev.h>
-
-struct omap_clk {
- u16 cpu;
- struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck, cp) \
- { \
- .cpu = cp, \
- .lk = { \
- .dev_id = dev, \
- .con_id = con, \
- .clk = ck, \
- }, \
- }
-
-/* Platform flags for the clkdev-OMAP integration code */
-#define CK_310 (1 << 0)
-#define CK_7XX (1 << 1) /* 7xx, 850 */
-#define CK_1510 (1 << 2)
-#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
-#define CK_242X (1 << 4)
-#define CK_243X (1 << 5) /* 243x, 253x */
-#define CK_3430ES1 (1 << 6) /* 34xxES1 only */
-#define CK_3430ES2PLUS (1 << 7) /* 34xxES2, ES3, non-Sitara 35xx only */
-#define CK_AM35XX (1 << 9) /* Sitara AM35xx */
-#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */
-#define CK_443X (1 << 11)
-#define CK_TI816X (1 << 12)
-#define CK_446X (1 << 13)
-#define CK_AM33XX (1 << 14) /* AM33xx specific clocks */
-#define CK_1710 (1 << 15) /* 1710 extra for rate selection */
-
-
-#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
-#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX)
-
-
-#endif
-
+++ /dev/null
-/*
- * OMAP clock: data structure definitions, function prototypes, shared macros
- *
- * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-
-#include <linux/list.h>
-
-struct module;
-struct clk;
-struct clockdomain;
-
-/* Temporary, needed during the common clock framework conversion */
-#define __clk_get_name(clk) (clk->name)
-#define __clk_get_parent(clk) (clk->parent)
-#define __clk_get_rate(clk) (clk->rate)
-
-/**
- * struct clkops - some clock function pointers
- * @enable: fn ptr that enables the current clock in hardware
- * @disable: fn ptr that enables the current clock in hardware
- * @find_idlest: function returning the IDLEST register for the clock's IP blk
- * @find_companion: function returning the "companion" clk reg for the clock
- * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
- * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
- *
- * A "companion" clk is an accompanying clock to the one being queried
- * that must be enabled for the IP module connected to the clock to
- * become accessible by the hardware. Neither @find_idlest nor
- * @find_companion should be needed; that information is IP
- * block-specific; the hwmod code has been created to handle this, but
- * until hwmod data is ready and drivers have been converted to use PM
- * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
- * @find_companion must, unfortunately, remain.
- */
-struct clkops {
- int (*enable)(struct clk *);
- void (*disable)(struct clk *);
- void (*find_idlest)(struct clk *, void __iomem **,
- u8 *, u8 *);
- void (*find_companion)(struct clk *, void __iomem **,
- u8 *);
- void (*allow_idle)(struct clk *);
- void (*deny_idle)(struct clk *);
-};
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-/* struct clksel_rate.flags possibilities */
-#define RATE_IN_242X (1 << 0)
-#define RATE_IN_243X (1 << 1)
-#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */
-#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */
-#define RATE_IN_36XX (1 << 4)
-#define RATE_IN_4430 (1 << 5)
-#define RATE_IN_TI816X (1 << 6)
-#define RATE_IN_4460 (1 << 7)
-#define RATE_IN_AM33XX (1 << 8)
-#define RATE_IN_TI814X (1 << 9)
-
-#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
-#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
-#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX)
-#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460)
-
-/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
-#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
-
-
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
- u32 val;
- u8 div;
- u16 flags;
-};
-
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
- struct clk *parent;
- const struct clksel_rate *rates;
-};
-
-/**
- * struct dpll_data - DPLL registers and integration data
- * @mult_div1_reg: register containing the DPLL M and N bitfields
- * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
- * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
- * @clk_bypass: struct clk pointer to the clock's bypass clock input
- * @clk_ref: struct clk pointer to the clock's reference clock input
- * @control_reg: register containing the DPLL mode bitfield
- * @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
- * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
- * @max_multiplier: maximum valid non-bypass multiplier value (actual)
- * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
- * @min_divider: minimum valid non-bypass divider value (actual)
- * @max_divider: maximum valid non-bypass divider value (actual)
- * @modes: possible values of @enable_mask
- * @autoidle_reg: register containing the DPLL autoidle mode bitfield
- * @idlest_reg: register containing the DPLL idle status bitfield
- * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
- * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
- * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
- * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
- * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
- * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
- * @flags: DPLL type/features (see below)
- *
- * Possible values for @flags:
- * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
- *
- * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
- *
- * XXX Some DPLLs have multiple bypass inputs, so it's not technically
- * correct to only have one @clk_bypass pointer.
- *
- * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
- * @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a different structure, so that the runtime-fixed data
- * can be placed into read-only space.
- */
-struct dpll_data {
- void __iomem *mult_div1_reg;
- u32 mult_mask;
- u32 div1_mask;
- struct clk *clk_bypass;
- struct clk *clk_ref;
- void __iomem *control_reg;
- u32 enable_mask;
- unsigned long last_rounded_rate;
- u16 last_rounded_m;
- u16 max_multiplier;
- u8 last_rounded_n;
- u8 min_divider;
- u16 max_divider;
- u8 modes;
- void __iomem *autoidle_reg;
- void __iomem *idlest_reg;
- u32 autoidle_mask;
- u32 freqsel_mask;
- u32 idlest_mask;
- u32 dco_mask;
- u32 sddiv_mask;
- u8 auto_recal_bit;
- u8 recal_en_bit;
- u8 recal_st_bit;
- u8 flags;
-};
-
-#endif
-
-/*
- * struct clk.flags possibilities
- *
- * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- * bits share the same register. This flag allows the
- * omap4_dpllmx*() code to determine which GATE_CTRL bit field
- * should be used. This is a temporary solution - a better approach
- * would be to associate clock type-specific data with the clock,
- * similar to the struct dpll_data approach.
- */
-#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL (1 << 1)
-#define CLOCK_NO_IDLE_PARENT (1 << 2)
-#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
-#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2 (1 << 5)
-
-/**
- * struct clk - OMAP struct clk
- * @node: list_head connecting this clock into the full clock list
- * @ops: struct clkops * for this clock
- * @name: the name of the clock in the hardware (used in hwmod data and debug)
- * @parent: pointer to this clock's parent struct clk
- * @children: list_head connecting to the child clks' @sibling list_heads
- * @sibling: list_head connecting this clk to its parent clk's @children
- * @rate: current clock rate
- * @enable_reg: register to write to enable the clock (see @enable_bit)
- * @recalc: fn ptr that returns the clock's current rate
- * @set_rate: fn ptr that can change the clock's current rate
- * @round_rate: fn ptr that can round the clock's current rate
- * @init: fn ptr to do clock-specific initialization
- * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
- * @usecount: number of users that have requested this clock to be enabled
- * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
- * @flags: see "struct clk.flags possibilities" above
- * @clksel_reg: for clksel clks, register va containing src/divisor select
- * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
- * @clksel: for clksel clks, pointer to struct clksel for this clock
- * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
- * @clkdm_name: clockdomain name that this clock is contained in
- * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
- * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
- * @src_offset: bitshift for source selection bitfield (OMAP1 only)
- *
- * XXX @rate_offset, @src_offset should probably be removed and OMAP1
- * clock code converted to use clksel.
- *
- * XXX @usecount is poorly named. It should be "enable_count" or
- * something similar. "users" in the description refers to kernel
- * code (core code or drivers) that have called clk_enable() and not
- * yet called clk_disable(); the usecount of parent clocks is also
- * incremented by the clock code when clk_enable() is called on child
- * clocks and decremented by the clock code when clk_disable() is
- * called on child clocks.
- *
- * XXX @clkdm, @usecount, @children, @sibling should be marked for
- * internal use only.
- *
- * @children and @sibling are used to optimize parent-to-child clock
- * tree traversals. (child-to-parent traversals use @parent.)
- *
- * XXX The notion of the clock's current rate probably needs to be
- * separated from the clock's target rate.
- */
-struct clk {
- struct list_head node;
- const struct clkops *ops;
- const char *name;
- struct clk *parent;
- struct list_head children;
- struct list_head sibling; /* node for children */
- unsigned long rate;
- void __iomem *enable_reg;
- unsigned long (*recalc)(struct clk *);
- int (*set_rate)(struct clk *, unsigned long);
- long (*round_rate)(struct clk *, unsigned long);
- void (*init)(struct clk *);
- u8 enable_bit;
- s8 usecount;
- u8 fixed_div;
- u8 flags;
-#ifdef CONFIG_ARCH_OMAP2PLUS
- void __iomem *clksel_reg;
- u32 clksel_mask;
- const struct clksel *clksel;
- struct dpll_data *dpll_data;
- const char *clkdm_name;
- struct clockdomain *clkdm;
-#else
- u8 rate_offset;
- u8 src_offset;
-#endif
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
- struct dentry *dent; /* For visible tree hierarchy */
-#endif
-};
-
-struct clk_functions {
- int (*clk_enable)(struct clk *clk);
- void (*clk_disable)(struct clk *clk);
- long (*clk_round_rate)(struct clk *clk, unsigned long rate);
- int (*clk_set_rate)(struct clk *clk, unsigned long rate);
- int (*clk_set_parent)(struct clk *clk, struct clk *parent);
- void (*clk_allow_idle)(struct clk *clk);
- void (*clk_deny_idle)(struct clk *clk);
- void (*clk_disable_unused)(struct clk *clk);
-};
-
-extern int mpurate;
-
-extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_preinit(struct clk *clk);
-extern int clk_register(struct clk *clk);
-extern void clk_reparent(struct clk *child, struct clk *parent);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern unsigned long followparent_recalc(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-extern struct clk *omap_clk_get_by_name(const char *name);
-extern int omap_clk_enable_autoidle_all(void);
-extern int omap_clk_disable_autoidle_all(void);
-
-extern const struct clkops clkops_null;
-
-extern struct clk dummy_ck;
-
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/common.h
- *
- * Header for code common to all OMAP machines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
-#define __ARCH_ARM_MACH_OMAP_COMMON_H
-
-#include <plat/i2c.h>
-#include <plat/omap_hwmod.h>
-
-extern int __init omap_init_clocksource_32k(void __iomem *vbase);
-
-extern void __init omap_check_revision(void);
-
-extern void omap_reserve(void);
-extern int omap_dss_reset(struct omap_hwmod *);
-
-void omap_sram_init(void);
-
-#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
--- /dev/null
+int omap_init_clocksource_32k(void __iomem *vbase);
/*
- * arch/arm/plat-omap/include/mach/cpu.h
- *
* OMAP cpu type detection
*
* Copyright (C) 2004, 2008 Nokia Corporation
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
-#ifndef __ASSEMBLY__
-
-#include <linux/bitops.h>
-#include <plat/multi.h>
-
-/*
- * Omap device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST 0
-#define OMAP2_DEVICE_TYPE_EMU 1
-#define OMAP2_DEVICE_TYPE_SEC 2
-#define OMAP2_DEVICE_TYPE_GP 3
-#define OMAP2_DEVICE_TYPE_BAD 4
-
-int omap_type(void);
-
-/*
- * omap_rev bits:
- * CPU id bits (0730, 1510, 1710, 2422...) [31:16]
- * CPU revision (See _REV_ defined in cpu.h) [15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
- */
-unsigned int omap_rev(void);
-
-/*
- * Get the CPU revision for OMAP devices
- */
-#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
-
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx(): True for OMAP730, OMAP850
- * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x(): True for OMAP2430
- * cpu_is_omap343x(): True for OMAP3430
- * cpu_is_omap443x(): True for OMAP4430
- * cpu_is_omap446x(): True for OMAP4460
- * cpu_is_omap447x(): True for OMAP4470
- * soc_is_omap543x(): True for OMAP5430, OMAP5432
- */
-#define GET_OMAP_CLASS (omap_rev() & 0xff)
-
-#define IS_OMAP_CLASS(class, id) \
-static inline int is_omap ##class (void) \
-{ \
- return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
-}
-
-#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff)
-
-#define IS_AM_CLASS(class, id) \
-static inline int is_am ##class (void) \
-{ \
- return (GET_AM_CLASS == (id)) ? 1 : 0; \
-}
-
-#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff)
-
-#define IS_TI_CLASS(class, id) \
-static inline int is_ti ##class (void) \
-{ \
- return (GET_TI_CLASS == (id)) ? 1 : 0; \
-}
-
-#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
-
-#define IS_OMAP_SUBCLASS(subclass, id) \
-static inline int is_omap ##subclass (void) \
-{ \
- return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
-}
-
-#define IS_TI_SUBCLASS(subclass, id) \
-static inline int is_ti ##subclass (void) \
-{ \
- return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
-}
-
-#define IS_AM_SUBCLASS(subclass, id) \
-static inline int is_am ##subclass (void) \
-{ \
- return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
-}
-
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-IS_OMAP_CLASS(24xx, 0x24)
-IS_OMAP_CLASS(34xx, 0x34)
-IS_OMAP_CLASS(44xx, 0x44)
-IS_AM_CLASS(35xx, 0x35)
-IS_OMAP_CLASS(54xx, 0x54)
-IS_AM_CLASS(33xx, 0x33)
-
-IS_TI_CLASS(81xx, 0x81)
-
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
-IS_OMAP_SUBCLASS(343x, 0x343)
-IS_OMAP_SUBCLASS(363x, 0x363)
-IS_OMAP_SUBCLASS(443x, 0x443)
-IS_OMAP_SUBCLASS(446x, 0x446)
-IS_OMAP_SUBCLASS(447x, 0x447)
-IS_OMAP_SUBCLASS(543x, 0x543)
-
-IS_TI_SUBCLASS(816x, 0x816)
-IS_TI_SUBCLASS(814x, 0x814)
-IS_AM_SUBCLASS(335x, 0x335)
-
-#define cpu_is_omap7xx() 0
-#define cpu_is_omap15xx() 0
-#define cpu_is_omap16xx() 0
-#define cpu_is_omap24xx() 0
-#define cpu_is_omap242x() 0
-#define cpu_is_omap243x() 0
-#define cpu_is_omap34xx() 0
-#define cpu_is_omap343x() 0
-#define cpu_is_ti81xx() 0
-#define cpu_is_ti816x() 0
-#define cpu_is_ti814x() 0
-#define soc_is_am35xx() 0
-#define soc_is_am33xx() 0
-#define soc_is_am335x() 0
-#define cpu_is_omap44xx() 0
-#define cpu_is_omap443x() 0
-#define cpu_is_omap446x() 0
-#define cpu_is_omap447x() 0
-#define soc_is_omap54xx() 0
-#define soc_is_omap543x() 0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-# undef cpu_is_omap15xx
-# define cpu_is_omap15xx() is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-# undef cpu_is_omap16xx
-# define cpu_is_omap16xx() is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-# undef cpu_is_omap15xx
-# define cpu_is_omap15xx() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-# undef cpu_is_omap16xx
-# define cpu_is_omap16xx() 1
-# endif
-#endif
-
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP2)
-# undef cpu_is_omap24xx
-# define cpu_is_omap24xx() is_omap24xx()
-# endif
-# if defined (CONFIG_SOC_OMAP2420)
-# undef cpu_is_omap242x
-# define cpu_is_omap242x() is_omap242x()
-# endif
-# if defined (CONFIG_SOC_OMAP2430)
-# undef cpu_is_omap243x
-# define cpu_is_omap243x() is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap34xx
-# undef cpu_is_omap343x
-# define cpu_is_omap34xx() is_omap34xx()
-# define cpu_is_omap343x() is_omap343x()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP2)
-# undef cpu_is_omap24xx
-# define cpu_is_omap24xx() 1
-# endif
-# if defined(CONFIG_SOC_OMAP2420)
-# undef cpu_is_omap242x
-# define cpu_is_omap242x() 1
-# endif
-# if defined(CONFIG_SOC_OMAP2430)
-# undef cpu_is_omap243x
-# define cpu_is_omap243x() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap34xx
-# define cpu_is_omap34xx() 1
-# endif
-# if defined(CONFIG_SOC_OMAP3430)
-# undef cpu_is_omap343x
-# define cpu_is_omap343x() 1
-# endif
-#endif
-
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap310(): True for OMAP310
- * cpu_is_omap1510(): True for OMAP1510
- * cpu_is_omap1610(): True for OMAP1610
- * cpu_is_omap1611(): True for OMAP1611
- * cpu_is_omap5912(): True for OMAP5912
- * cpu_is_omap1621(): True for OMAP1621
- * cpu_is_omap1710(): True for OMAP1710
- * cpu_is_omap2420(): True for OMAP2420
- * cpu_is_omap2422(): True for OMAP2422
- * cpu_is_omap2423(): True for OMAP2423
- * cpu_is_omap2430(): True for OMAP2430
- * cpu_is_omap3430(): True for OMAP3430
- */
-#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
-
-#define IS_OMAP_TYPE(type, id) \
-static inline int is_omap ##type (void) \
-{ \
- return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
-}
-
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
-IS_OMAP_TYPE(3430, 0x3430)
-
-#define cpu_is_omap310() 0
-#define cpu_is_omap1510() 0
-#define cpu_is_omap1610() 0
-#define cpu_is_omap5912() 0
-#define cpu_is_omap1611() 0
-#define cpu_is_omap1621() 0
-#define cpu_is_omap1710() 0
-#define cpu_is_omap2420() 0
-#define cpu_is_omap2422() 0
-#define cpu_is_omap2423() 0
-#define cpu_is_omap2430() 0
-#define cpu_is_omap3430() 0
-#define cpu_is_omap3630() 0
-#define soc_is_omap5430() 0
-
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 310 vs. 1510 and 1611B/5912 vs. 1710.
- */
-
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef cpu_is_omap310
-# undef cpu_is_omap1510
-# define cpu_is_omap310() is_omap310()
-# define cpu_is_omap1510() is_omap1510()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef cpu_is_omap1610
-# undef cpu_is_omap1611
-# undef cpu_is_omap5912
-# undef cpu_is_omap1621
-# undef cpu_is_omap1710
-# define cpu_is_omap1610() is_omap1610()
-# define cpu_is_omap1611() is_omap1611()
-# define cpu_is_omap5912() is_omap5912()
-# define cpu_is_omap1621() is_omap1621()
-# define cpu_is_omap1710() is_omap1710()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-# undef cpu_is_omap2420
-# undef cpu_is_omap2422
-# undef cpu_is_omap2423
-# undef cpu_is_omap2430
-# define cpu_is_omap2420() is_omap2420()
-# define cpu_is_omap2422() is_omap2422()
-# define cpu_is_omap2423() is_omap2423()
-# define cpu_is_omap2430() is_omap2430()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap3430
-# undef cpu_is_ti81xx
-# undef cpu_is_ti816x
-# undef cpu_is_ti814x
-# undef soc_is_am35xx
-# define cpu_is_omap3430() is_omap3430()
-# undef cpu_is_omap3630
-# define cpu_is_omap3630() is_omap363x()
-# define cpu_is_ti81xx() is_ti81xx()
-# define cpu_is_ti816x() is_ti816x()
-# define cpu_is_ti814x() is_ti814x()
-# define soc_is_am35xx() is_am35xx()
+#ifdef CONFIG_ARCH_OMAP1
+#include <mach/soc.h>
#endif
-# if defined(CONFIG_SOC_AM33XX)
-# undef soc_is_am33xx
-# undef soc_is_am335x
-# define soc_is_am33xx() is_am33xx()
-# define soc_is_am335x() is_am335x()
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#include "../../mach-omap2/soc.h"
#endif
-# if defined(CONFIG_ARCH_OMAP4)
-# undef cpu_is_omap44xx
-# undef cpu_is_omap443x
-# undef cpu_is_omap446x
-# undef cpu_is_omap447x
-# define cpu_is_omap44xx() is_omap44xx()
-# define cpu_is_omap443x() is_omap443x()
-# define cpu_is_omap446x() is_omap446x()
-# define cpu_is_omap447x() is_omap447x()
-# endif
-
-# if defined(CONFIG_SOC_OMAP5)
-# undef soc_is_omap54xx
-# undef soc_is_omap543x
-# define soc_is_omap54xx() is_omap54xx()
-# define soc_is_omap543x() is_omap543x()
-#endif
-
-/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
- cpu_is_omap16xx())
-#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
- cpu_is_omap44xx() || soc_is_omap54xx() || \
- soc_is_am33xx())
-
-/* Various silicon revisions for omap2 */
-#define OMAP242X_CLASS 0x24200024
-#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
-
-#define OMAP243X_CLASS 0x24300024
-#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
-
-#define OMAP343X_CLASS 0x34300034
-#define OMAP3430_REV_ES1_0 OMAP343X_CLASS
-#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
-#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8))
-#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8))
-#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8))
-#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8))
-
-#define OMAP363X_CLASS 0x36300034
-#define OMAP3630_REV_ES1_0 OMAP363X_CLASS
-#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
-#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-
-#define TI816X_CLASS 0x81600034
-#define TI8168_REV_ES1_0 TI816X_CLASS
-#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
-
-#define TI814X_CLASS 0x81400034
-#define TI8148_REV_ES1_0 TI814X_CLASS
-#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8))
-#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8))
-
-#define AM35XX_CLASS 0x35170034
-#define AM35XX_REV_ES1_0 AM35XX_CLASS
-#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8))
-
-#define AM335X_CLASS 0x33500033
-#define AM335X_REV_ES1_0 AM335X_CLASS
-
-#define OMAP443X_CLASS 0x44300044
-#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
-#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8))
-#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8))
-#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8))
-#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8))
-
-#define OMAP446X_CLASS 0x44600044
-#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
-#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8))
-
-#define OMAP447X_CLASS 0x44700044
-#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8))
-
-#define OMAP54XX_CLASS 0x54000054
-#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
-#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
-
-void omap2xxx_check_revision(void);
-void omap3xxx_check_revision(void);
-void omap4xxx_check_revision(void);
-void omap5xxx_check_revision(void);
-void omap3xxx_check_features(void);
-void ti81xx_check_features(void);
-void omap4xxx_check_features(void);
-
-/*
- * Runtime detection of OMAP3 features
- *
- * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
- * family have OS-level control over the I/O chain clock. This is
- * to avoid a window during which wakeups could potentially be lost
- * during powerdomain transitions. If this bit is set, it
- * indicates that the chip does support OS-level control of this
- * feature.
- */
-extern u32 omap_features;
-
-#define OMAP3_HAS_L2CACHE BIT(0)
-#define OMAP3_HAS_IVA BIT(1)
-#define OMAP3_HAS_SGX BIT(2)
-#define OMAP3_HAS_NEON BIT(3)
-#define OMAP3_HAS_ISP BIT(4)
-#define OMAP3_HAS_192MHZ_CLK BIT(5)
-#define OMAP3_HAS_IO_WAKEUP BIT(6)
-#define OMAP3_HAS_SDRC BIT(7)
-#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8)
-#define OMAP4_HAS_MPU_1GHZ BIT(9)
-#define OMAP4_HAS_MPU_1_2GHZ BIT(10)
-#define OMAP4_HAS_MPU_1_5GHZ BIT(11)
-
-
-#define OMAP3_HAS_FEATURE(feat,flag) \
-static inline unsigned int omap3_has_ ##feat(void) \
-{ \
- return omap_features & OMAP3_HAS_ ##flag; \
-} \
-
-OMAP3_HAS_FEATURE(l2cache, L2CACHE)
-OMAP3_HAS_FEATURE(sgx, SGX)
-OMAP3_HAS_FEATURE(iva, IVA)
-OMAP3_HAS_FEATURE(neon, NEON)
-OMAP3_HAS_FEATURE(isp, ISP)
-OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
-OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
-OMAP3_HAS_FEATURE(sdrc, SDRC)
-OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
-
-/*
- * Runtime detection of OMAP4 features
- */
-#define OMAP4_HAS_FEATURE(feat, flag) \
-static inline unsigned int omap4_has_ ##feat(void) \
-{ \
- return omap_features & OMAP4_HAS_ ##flag; \
-} \
-
-OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
-OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
-OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
-
-#endif /* __ASSEMBLY__ */
#endif
-#ifndef _OMAP_DEBUG_DEVICES_H
-#define _OMAP_DEBUG_DEVICES_H
-
-#include <linux/types.h>
-
/* for TI reference platforms sharing the same debug card */
extern int debug_card_init(u32 addr, unsigned gpio);
-
-#endif
+++ /dev/null
-/*
- * OMAP4 SDMA channel definitions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- * Paul Walmsley (paul@pwsan.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-
-#define OMAP44XX_DMA_SYS_REQ0 2
-#define OMAP44XX_DMA_SYS_REQ1 3
-#define OMAP44XX_DMA_GPMC 4
-#define OMAP44XX_DMA_DSS_DISPC_REQ 6
-#define OMAP44XX_DMA_SYS_REQ2 7
-#define OMAP44XX_DMA_MCASP1_AXEVT 8
-#define OMAP44XX_DMA_ISS_REQ1 9
-#define OMAP44XX_DMA_ISS_REQ2 10
-#define OMAP44XX_DMA_MCASP1_AREVT 11
-#define OMAP44XX_DMA_ISS_REQ3 12
-#define OMAP44XX_DMA_ISS_REQ4 13
-#define OMAP44XX_DMA_DSS_RFBI_REQ 14
-#define OMAP44XX_DMA_SPI3_TX0 15
-#define OMAP44XX_DMA_SPI3_RX0 16
-#define OMAP44XX_DMA_MCBSP2_TX 17
-#define OMAP44XX_DMA_MCBSP2_RX 18
-#define OMAP44XX_DMA_MCBSP3_TX 19
-#define OMAP44XX_DMA_MCBSP3_RX 20
-#define OMAP44XX_DMA_C2C_SSCM_GPO0 21
-#define OMAP44XX_DMA_C2C_SSCM_GPO1 22
-#define OMAP44XX_DMA_SPI3_TX1 23
-#define OMAP44XX_DMA_SPI3_RX1 24
-#define OMAP44XX_DMA_I2C3_TX 25
-#define OMAP44XX_DMA_I2C3_RX 26
-#define OMAP44XX_DMA_I2C1_TX 27
-#define OMAP44XX_DMA_I2C1_RX 28
-#define OMAP44XX_DMA_I2C2_TX 29
-#define OMAP44XX_DMA_I2C2_RX 30
-#define OMAP44XX_DMA_MCBSP4_TX 31
-#define OMAP44XX_DMA_MCBSP4_RX 32
-#define OMAP44XX_DMA_MCBSP1_TX 33
-#define OMAP44XX_DMA_MCBSP1_RX 34
-#define OMAP44XX_DMA_SPI1_TX0 35
-#define OMAP44XX_DMA_SPI1_RX0 36
-#define OMAP44XX_DMA_SPI1_TX1 37
-#define OMAP44XX_DMA_SPI1_RX1 38
-#define OMAP44XX_DMA_SPI1_TX2 39
-#define OMAP44XX_DMA_SPI1_RX2 40
-#define OMAP44XX_DMA_SPI1_TX3 41
-#define OMAP44XX_DMA_SPI1_RX3 42
-#define OMAP44XX_DMA_SPI2_TX0 43
-#define OMAP44XX_DMA_SPI2_RX0 44
-#define OMAP44XX_DMA_SPI2_TX1 45
-#define OMAP44XX_DMA_SPI2_RX1 46
-#define OMAP44XX_DMA_MMC2_TX 47
-#define OMAP44XX_DMA_MMC2_RX 48
-#define OMAP44XX_DMA_UART1_TX 49
-#define OMAP44XX_DMA_UART1_RX 50
-#define OMAP44XX_DMA_UART2_TX 51
-#define OMAP44XX_DMA_UART2_RX 52
-#define OMAP44XX_DMA_UART3_TX 53
-#define OMAP44XX_DMA_UART3_RX 54
-#define OMAP44XX_DMA_UART4_TX 55
-#define OMAP44XX_DMA_UART4_RX 56
-#define OMAP44XX_DMA_MMC4_TX 57
-#define OMAP44XX_DMA_MMC4_RX 58
-#define OMAP44XX_DMA_MMC5_TX 59
-#define OMAP44XX_DMA_MMC5_RX 60
-#define OMAP44XX_DMA_MMC1_TX 61
-#define OMAP44XX_DMA_MMC1_RX 62
-#define OMAP44XX_DMA_SYS_REQ3 64
-#define OMAP44XX_DMA_MCPDM_UP 65
-#define OMAP44XX_DMA_MCPDM_DL 66
-#define OMAP44XX_DMA_DMIC_REQ 67
-#define OMAP44XX_DMA_C2C_SSCM_GPO2 68
-#define OMAP44XX_DMA_C2C_SSCM_GPO3 69
-#define OMAP44XX_DMA_SPI4_TX0 70
-#define OMAP44XX_DMA_SPI4_RX0 71
-#define OMAP44XX_DMA_DSS_DSI1_REQ0 72
-#define OMAP44XX_DMA_DSS_DSI1_REQ1 73
-#define OMAP44XX_DMA_DSS_DSI1_REQ2 74
-#define OMAP44XX_DMA_DSS_DSI1_REQ3 75
-#define OMAP44XX_DMA_DSS_HDMI_REQ 76
-#define OMAP44XX_DMA_MMC3_TX 77
-#define OMAP44XX_DMA_MMC3_RX 78
-#define OMAP44XX_DMA_USIM_TX 79
-#define OMAP44XX_DMA_USIM_RX 80
-#define OMAP44XX_DMA_DSS_DSI2_REQ0 81
-#define OMAP44XX_DMA_DSS_DSI2_REQ1 82
-#define OMAP44XX_DMA_DSS_DSI2_REQ2 83
-#define OMAP44XX_DMA_DSS_DSI2_REQ3 84
-#define OMAP44XX_DMA_SLIMBUS1_TX0 85
-#define OMAP44XX_DMA_SLIMBUS1_TX1 86
-#define OMAP44XX_DMA_SLIMBUS1_TX2 87
-#define OMAP44XX_DMA_SLIMBUS1_TX3 88
-#define OMAP44XX_DMA_SLIMBUS1_RX0 89
-#define OMAP44XX_DMA_SLIMBUS1_RX1 90
-#define OMAP44XX_DMA_SLIMBUS1_RX2 91
-#define OMAP44XX_DMA_SLIMBUS1_RX3 92
-#define OMAP44XX_DMA_SLIMBUS2_TX0 93
-#define OMAP44XX_DMA_SLIMBUS2_TX1 94
-#define OMAP44XX_DMA_SLIMBUS2_TX2 95
-#define OMAP44XX_DMA_SLIMBUS2_TX3 96
-#define OMAP44XX_DMA_SLIMBUS2_RX0 97
-#define OMAP44XX_DMA_SLIMBUS2_RX1 98
-#define OMAP44XX_DMA_SLIMBUS2_RX2 99
-#define OMAP44XX_DMA_SLIMBUS2_RX3 100
-#define OMAP44XX_DMA_ABE_REQ_0 101
-#define OMAP44XX_DMA_ABE_REQ_1 102
-#define OMAP44XX_DMA_ABE_REQ_2 103
-#define OMAP44XX_DMA_ABE_REQ_3 104
-#define OMAP44XX_DMA_ABE_REQ_4 105
-#define OMAP44XX_DMA_ABE_REQ_5 106
-#define OMAP44XX_DMA_ABE_REQ_6 107
-#define OMAP44XX_DMA_ABE_REQ_7 108
-#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ 109
-#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ 110
-#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ 111
-#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ 112
-#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ 113
-#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ 114
-#define OMAP44XX_DMA_DES_P_CTX_IN_REQ 115
-#define OMAP44XX_DMA_DES_P_DATA_IN_REQ 116
-#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ 117
-#define OMAP44XX_DMA_SHA2_CTXIN_P 118
-#define OMAP44XX_DMA_SHA2_DIN_P 119
-#define OMAP44XX_DMA_SHA2_CTXOUT_P 120
-#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ 121
-#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ 122
-#define OMAP44XX_DMA_I2C4_TX 124
-#define OMAP44XX_DMA_I2C4_RX 125
-
-#endif
/* set_timer_src - Only used for OMAP1 devices */
int (*set_timer_src)(struct platform_device *pdev, int source);
u32 timer_capability;
+ int (*get_context_loss_count)(struct device *);
};
int omap_dm_timer_reserve_systimer(int id);
struct omap_dm_timer *omap_dm_timer_request(void);
struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
+struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap);
int omap_dm_timer_free(struct omap_dm_timer *timer);
void omap_dm_timer_enable(struct omap_dm_timer *timer);
void omap_dm_timer_disable(struct omap_dm_timer *timer);
unsigned reserved:1;
unsigned posted:1;
struct timer_regs context;
+ int (*get_context_loss_count)(struct device *);
int ctx_loss_count;
int revision;
u32 capability;
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/fpga.h
- *
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-
-extern void omap1510_fpga_init_irq(void);
-
-#define fpga_read(reg) __raw_readb(reg)
-#define fpga_write(val, reg) __raw_writeb(val, reg)
-
-/*
- * ---------------------------------------------------------------------------
- * H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
-#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
-#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
-
-#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
-#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
-
-/* NOTE: most boards don't have a static mapping for the FPGA ... */
-struct h2p2_dbg_fpga {
- /* offset 0x00 */
- u16 smc91x[8];
- /* offset 0x10 */
- u16 fpga_rev;
- u16 board_rev;
- u16 gpio_outputs;
- u16 leds;
- /* offset 0x18 */
- u16 misc_inputs;
- u16 lan_status;
- u16 lan_reset;
- u16 reserved0;
- /* offset 0x20 */
- u16 ps2_data;
- u16 ps2_ctrl;
- /* plus also 4 rs232 ports ... */
-};
-
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
-#define H2P2_DBG_FPGA_LED_RED (1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE (1 << 12)
-/* cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-
-#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
-
-/*
- * ---------------------------------------------------------------------------
- * OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */
-#define OMAP1510_FPGA_SIZE SZ_4K
-#define OMAP1510_FPGA_START 0x08000000 /* PA */
-
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1)
-
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5)
-
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7)
-
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9)
-
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210)
-
-#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
-
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE 0x42
-
-#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
-
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */
-#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */
-#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */
-#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd (1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
-
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
-
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
-
-#endif
* 02110-1301 USA
*
*/
-#ifndef __ASM__ARCH_OMAP_I2C_H
-#define __ASM__ARCH_OMAP_I2C_H
-#include <linux/i2c.h>
-#include <linux/i2c-omap.h>
+#ifndef __PLAT_OMAP_I2C_H
+#define __PLAT_OMAP_I2C_H
+
+struct i2c_board_info;
+struct omap_i2c_bus_platform_data;
+
+int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
+ int bus_id);
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
}
#endif
-/**
- * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
- * @fifo_depth: total controller FIFO size (in bytes)
- * @flags: differences in hardware support capability
- *
- * @fifo_depth represents what exists on the hardware, not what is
- * actually configured at runtime by the device driver.
- */
-struct omap_i2c_dev_attr {
- u8 fifo_depth;
- u32 flags;
-};
-
-void __init omap1_i2c_mux_pins(int bus_id);
-void __init omap2_i2c_mux_pins(int bus_id);
-
struct omap_hwmod;
int omap_i2c_reset(struct omap_hwmod *oh);
-#endif /* __ASM__ARCH_OMAP_I2C_H */
+#endif /* __PLAT_OMAP_I2C_H */
+++ /dev/null
-/*
- * Support for compiling in multiple OMAP processors
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __PLAT_OMAP_MULTI_H
-#define __PLAT_OMAP_MULTI_H
-
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap16xx
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-# error "OMAP1 and OMAP2PLUS can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2420
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2430
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap3
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap4
-# endif
-#endif
-
-#ifdef CONFIG_SOC_OMAP5
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap5
-# endif
-#endif
-
-#ifdef CONFIG_SOC_AM33XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME am33xx
-# endif
-#endif
-
-#endif /* __PLAT_OMAP_MULTI_H */
+++ /dev/null
-#ifndef __OMAP_SECURE_H__
-#define __OMAP_SECURE_H__
-
-#include <linux/types.h>
-
-extern int omap_secure_ram_reserve_memblock(void);
-
-#ifdef CONFIG_OMAP4_ERRATA_I688
-extern int omap_barrier_reserve_memblock(void);
-#else
-static inline void omap_barrier_reserve_memblock(void)
-{ }
-#endif
-#endif /* __OMAP_SECURE_H__ */
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/prcm.h
- *
- * Access definations for use in OMAP24XX clock and power management
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * XXX This file is deprecated. The PRCM is an OMAP2+-only subsystem,
- * so this file doesn't belong in plat-omap/include/plat. Please
- * do not add anything new to this file.
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
-#define __ASM_ARM_ARCH_OMAP_PRCM_H
-
-u32 omap_prcm_get_reset_sources(void);
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
- const char *name);
-
-#endif
-
-
-
+++ /dev/null
-#ifndef ____ASM_ARCH_SDRC_H
-#define ____ASM_ARCH_SDRC_H
-
-/*
- * OMAP2/3 SDRC/SMS register definitions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Tony Lindgren
- * Paul Walmsley
- * Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
-
-#define SDRC_SYSCONFIG 0x010
-#define SDRC_CS_CFG 0x040
-#define SDRC_SHARING 0x044
-#define SDRC_ERR_TYPE 0x04C
-#define SDRC_DLLA_CTRL 0x060
-#define SDRC_DLLA_STATUS 0x064
-#define SDRC_DLLB_CTRL 0x068
-#define SDRC_DLLB_STATUS 0x06C
-#define SDRC_POWER 0x070
-#define SDRC_MCFG_0 0x080
-#define SDRC_MR_0 0x084
-#define SDRC_EMR2_0 0x08c
-#define SDRC_ACTIM_CTRL_A_0 0x09c
-#define SDRC_ACTIM_CTRL_B_0 0x0a0
-#define SDRC_RFR_CTRL_0 0x0a4
-#define SDRC_MANUAL_0 0x0a8
-#define SDRC_MCFG_1 0x0B0
-#define SDRC_MR_1 0x0B4
-#define SDRC_EMR2_1 0x0BC
-#define SDRC_ACTIM_CTRL_A_1 0x0C4
-#define SDRC_ACTIM_CTRL_B_1 0x0C8
-#define SDRC_RFR_CTRL_1 0x0D4
-#define SDRC_MANUAL_1 0x0D8
-
-#define SDRC_POWER_AUTOCOUNT_SHIFT 8
-#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
-#define SDRC_POWER_CLKCTRL_SHIFT 4
-#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
-#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
-
-/*
- * These values represent the number of memory clock cycles between
- * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
- * rows per device, and include a subtraction of a 50 cycle window in the
- * event that the autorefresh command is delayed due to other SDRC activity.
- * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
- * counter reaches 0.
- *
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration. A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1)
-#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
-#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
-#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
-#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
-
-
-/*
- * SMS register access
- */
-
-#define OMAP242X_SMS_REGADDR(reg) \
- (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg) \
- (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg) \
- (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
-
-/* SMS register offsets - read/write with sms_{read,write}_reg() */
-
-#define SMS_SYSCONFIG 0x010
-#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context)
-#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context)
-#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context)
-/* REVISIT: fill in other SMS registers here */
-
-
-#ifndef __ASSEMBLER__
-
-/**
- * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
- * @rate: SDRC clock rate (in Hz)
- * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
- * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
- * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
- * @mr: Value to program to SDRC_MR for this rate
- *
- * This structure holds a pre-computed set of register values for the
- * SDRC for a given SDRC clock rate and SDRAM chip. These are
- * intended to be pre-computed and specified in an array in the board-*.c
- * files. The structure is keyed off the 'rate' field.
- */
-struct omap_sdrc_params {
- unsigned long rate;
- u32 actim_ctrla;
- u32 actim_ctrlb;
- u32 rfr_ctrl;
- u32 mr;
-};
-
-#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
-void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
- struct omap_sdrc_params *sdrc_cs1);
-#else
-static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
- struct omap_sdrc_params *sdrc_cs1) {};
-#endif
-
-int omap2_sdrc_get_params(unsigned long r,
- struct omap_sdrc_params **sdrc_cs0,
- struct omap_sdrc_params **sdrc_cs1);
-void omap2_sms_save_context(void);
-void omap2_sms_restore_context(void);
-
-void omap2_sms_write_rot_control(u32 val, unsigned ctx);
-void omap2_sms_write_rot_size(u32 val, unsigned ctx);
-void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
-
-#ifdef CONFIG_ARCH_OMAP2
-
-struct memory_timings {
- u32 m_type; /* ddr = 1, sdr = 0 */
- u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
- u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
- u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
- u32 base_cs; /* base chip select to use for calculations */
-};
-
-extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
-struct omap_sdrc_params *rx51_get_sdram_timings(void);
-
-u32 omap2xxx_sdrc_dll_is_unlocked(void);
-u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
-
-#endif /* CONFIG_ARCH_OMAP2 */
-
-#endif /* __ASSEMBLER__ */
-
-#endif
-/*
- * arch/arm/plat-omap/include/mach/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+int omap_sram_init(void);
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-
-#ifndef __ASSEMBLY__
-#include <asm/fncpy.h>
+void omap_map_sram(unsigned long start, unsigned long size,
+ unsigned long skip, int cached);
+void omap_sram_reset(void);
extern void *omap_sram_push_address(unsigned long size);
_res = fncpy(_sram_address, &(funcp), size); \
_res; \
})
-
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-
-extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-extern u32 omap3_configure_core_dpll(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern void omap3_sram_restore_context(void);
-
-/* Do not use these */
-extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap1_sram_reprogram_clock_sz;
-
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
-
-extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long omap242x_sram_ddr_init_sz;
-
-extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
- int bypass);
-extern unsigned long omap242x_sram_set_prcm_sz;
-
-extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern unsigned long omap242x_sram_reprogram_sdrc_sz;
-
-
-extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long omap243x_sram_ddr_init_sz;
-
-extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
- int bypass);
-extern unsigned long omap243x_sram_set_prcm_sz;
-
-extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
-extern u32 omap3_sram_configure_core_dpll(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-
-#ifdef CONFIG_PM
-extern void omap_push_sram_idle(void);
-#else
-static inline void omap_push_sram_idle(void) {}
-#endif /* CONFIG_PM */
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * OMAP2+: define the SRAM PA addresses.
- * Used by the SRAM management code and the idle sleep code.
- */
-#define OMAP2_SRAM_PA 0x40200000
-#define OMAP3_SRAM_PA 0x40200000
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PA 0x40304000
-#define OMAP4_SRAM_VA 0xfe404000
-#else
-#define OMAP4_SRAM_PA 0x40300000
-#endif
-#define AM33XX_SRAM_PA 0x40300000
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-
-#include <plat/serial.h>
-
-#define MDR1_MODE_MASK 0x07
-
-volatile u8 *uart_base;
-int uart_shift;
-
-/*
- * Store the DEBUG_LL uart number into memory.
- * See also debug-macro.S, and serial.c for related code.
- */
-static void set_omap_uart_info(unsigned char port)
-{
- /*
- * Get address of some.bss variable and round it down
- * a la CONFIG_AUTO_ZRELADDR.
- */
- u32 ram_start = (u32)&uart_shift & 0xf8000000;
- u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
- *uart_info = port;
-}
-
-static void putc(int c)
-{
- if (!uart_base)
- return;
-
- /* Check for UART 16x mode */
- if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
- return;
-
- while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
- barrier();
- uart_base[UART_TX << uart_shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Macros to configure UART1 and debug UART
- */
-#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
- if (machine_is_##mach()) { \
- uart_base = (volatile u8 *)(dbg_uart); \
- uart_shift = (dbg_shft); \
- port = (dbg_id); \
- set_omap_uart_info(port); \
- break; \
- }
-
-#define DEBUG_LL_OMAP7XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
- OMAP1UART##p)
-
-#define DEBUG_LL_OMAP1(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP1UART##p)
-
-#define DEBUG_LL_OMAP2(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP2UART##p)
-
-#define DEBUG_LL_OMAP3(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP3UART##p)
-
-#define DEBUG_LL_OMAP4(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP4UART##p)
-
-#define DEBUG_LL_OMAP5(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP5UART##p)
-/* Zoom2/3 shift is different for UART1 and external port */
-#define DEBUG_LL_ZOOM(mach) \
- _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
-
-#define DEBUG_LL_TI81XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
- TI81XXUART##p)
-
-#define DEBUG_LL_AM33XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
- AM33XXUART##p)
-
-static inline void arch_decomp_setup(void)
-{
- int port = 0;
-
- /*
- * Initialize the port based on the machine ID from the bootloader.
- * Note that we're using macros here instead of switch statement
- * as machine_is functions are optimized out for the boards that
- * are not selected.
- */
- do {
- /* omap7xx/8xx based boards using UART1 with shift 0 */
- DEBUG_LL_OMAP7XX(1, herald);
- DEBUG_LL_OMAP7XX(1, omap_perseus2);
-
- /* omap15xx/16xx based boards using UART1 */
- DEBUG_LL_OMAP1(1, ams_delta);
- DEBUG_LL_OMAP1(1, nokia770);
- DEBUG_LL_OMAP1(1, omap_h2);
- DEBUG_LL_OMAP1(1, omap_h3);
- DEBUG_LL_OMAP1(1, omap_innovator);
- DEBUG_LL_OMAP1(1, omap_osk);
- DEBUG_LL_OMAP1(1, omap_palmte);
- DEBUG_LL_OMAP1(1, omap_palmz71);
-
- /* omap15xx/16xx based boards using UART2 */
- DEBUG_LL_OMAP1(2, omap_palmtt);
-
- /* omap15xx/16xx based boards using UART3 */
- DEBUG_LL_OMAP1(3, sx1);
-
- /* omap2 based boards using UART1 */
- DEBUG_LL_OMAP2(1, omap_2430sdp);
- DEBUG_LL_OMAP2(1, omap_apollon);
- DEBUG_LL_OMAP2(1, omap_h4);
-
- /* omap2 based boards using UART3 */
- DEBUG_LL_OMAP2(3, nokia_n800);
- DEBUG_LL_OMAP2(3, nokia_n810);
- DEBUG_LL_OMAP2(3, nokia_n810_wimax);
-
- /* omap3 based boards using UART1 */
- DEBUG_LL_OMAP2(1, omap3evm);
- DEBUG_LL_OMAP3(1, omap_3430sdp);
- DEBUG_LL_OMAP3(1, omap_3630sdp);
- DEBUG_LL_OMAP3(1, omap3530_lv_som);
- DEBUG_LL_OMAP3(1, omap3_torpedo);
-
- /* omap3 based boards using UART3 */
- DEBUG_LL_OMAP3(3, cm_t35);
- DEBUG_LL_OMAP3(3, cm_t3517);
- DEBUG_LL_OMAP3(3, cm_t3730);
- DEBUG_LL_OMAP3(3, craneboard);
- DEBUG_LL_OMAP3(3, devkit8000);
- DEBUG_LL_OMAP3(3, igep0020);
- DEBUG_LL_OMAP3(3, igep0030);
- DEBUG_LL_OMAP3(3, nokia_rm680);
- DEBUG_LL_OMAP3(3, nokia_rm696);
- DEBUG_LL_OMAP3(3, nokia_rx51);
- DEBUG_LL_OMAP3(3, omap3517evm);
- DEBUG_LL_OMAP3(3, omap3_beagle);
- DEBUG_LL_OMAP3(3, omap3_pandora);
- DEBUG_LL_OMAP3(3, omap_ldp);
- DEBUG_LL_OMAP3(3, overo);
- DEBUG_LL_OMAP3(3, touchbook);
-
- /* omap4 based boards using UART3 */
- DEBUG_LL_OMAP4(3, omap_4430sdp);
- DEBUG_LL_OMAP4(3, omap4_panda);
-
- /* omap5 based boards using UART3 */
- DEBUG_LL_OMAP5(3, omap5_sevm);
-
- /* zoom2/3 external uart */
- DEBUG_LL_ZOOM(omap_zoom2);
- DEBUG_LL_ZOOM(omap_zoom3);
-
- /* TI8168 base boards using UART3 */
- DEBUG_LL_TI81XX(3, ti8168evm);
-
- /* TI8148 base boards using UART1 */
- DEBUG_LL_TI81XX(1, ti8148evm);
-
- /* AM33XX base boards using UART1 */
- DEBUG_LL_AM33XX(1, am335xevm);
- } while (0);
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
+++ /dev/null
-// include/asm-arm/mach-omap/usb.h
-
-#ifndef __ASM_ARCH_OMAP_USB_H
-#define __ASM_ARCH_OMAP_USB_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-
-#define OMAP3_HS_USB_PORTS 3
-
-enum usbhs_omap_port_mode {
- OMAP_USBHS_PORT_MODE_UNUSED,
- OMAP_EHCI_PORT_MODE_PHY,
- OMAP_EHCI_PORT_MODE_TLL,
- OMAP_EHCI_PORT_MODE_HSIC,
- OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
- OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
- OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
- OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
- OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
-};
-
-struct usbhs_omap_board_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
-
- /* have to be valid if phy_reset is true and portx is in phy mode */
- int reset_gpio_port[OMAP3_HS_USB_PORTS];
-
- /* Set this to true for ES2.x silicon */
- unsigned es2_compatibility:1;
-
- unsigned phy_reset:1;
-
- /*
- * Regulators for USB PHYs.
- * Each PHY can have a separate regulator.
- */
- struct regulator *regulator[OMAP3_HS_USB_PORTS];
-};
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-struct ehci_hcd_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
- int reset_gpio_port[OMAP3_HS_USB_PORTS];
- struct regulator *regulator[OMAP3_HS_USB_PORTS];
- unsigned phy_reset:1;
-};
-
-struct ohci_hcd_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
- unsigned es2_compatibility:1;
-};
-
-struct usbhs_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
-
- struct ehci_hcd_omap_platform_data *ehci_data;
- struct ohci_hcd_omap_platform_data *ohci_data;
-};
-
-struct usbtll_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
-};
-/*-------------------------------------------------------------------------*/
-
-struct omap_musb_board_data {
- u8 interface_type;
- u8 mode;
- u16 power;
- unsigned extvbus:1;
- void (*set_phy_power)(u8 on);
- void (*clear_irq)(void);
- void (*set_mode)(u8 mode);
- void (*reset)(void);
-};
-
-enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
-
-extern void usb_musb_init(struct omap_musb_board_data *board_data);
-
-extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
-extern int omap_tll_enable(void);
-extern int omap_tll_disable(void);
-
-extern int omap4430_phy_power(struct device *dev, int ID, int on);
-extern int omap4430_phy_set_clk(struct device *dev, int on);
-extern int omap4430_phy_init(struct device *dev);
-extern int omap4430_phy_exit(struct device *dev);
-extern int omap4430_phy_suspend(struct device *dev, int suspend);
-
-#endif
-
-extern void am35x_musb_reset(void);
-extern void am35x_musb_phy_power(u8 on);
-extern void am35x_musb_clear_irq(void);
-extern void am35x_set_mode(u8 musb_mode);
-extern void ti81xx_musb_phy_power(u8 on);
-
-/* AM35x */
-/* USB 2.0 PHY Control */
-#define CONF2_PHY_GPIOMODE (1 << 23)
-#define CONF2_OTGMODE (3 << 14)
-#define CONF2_NO_OVERRIDE (0 << 14)
-#define CONF2_FORCE_HOST (1 << 14)
-#define CONF2_FORCE_DEVICE (2 << 14)
-#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
-#define CONF2_SESENDEN (1 << 13)
-#define CONF2_VBDTCTEN (1 << 12)
-#define CONF2_REFFREQ_24MHZ (2 << 8)
-#define CONF2_REFFREQ_26MHZ (7 << 8)
-#define CONF2_REFFREQ_13MHZ (6 << 8)
-#define CONF2_REFFREQ (0xf << 8)
-#define CONF2_PHYCLKGD (1 << 7)
-#define CONF2_VBUSSENSE (1 << 6)
-#define CONF2_PHY_PLLON (1 << 5)
-#define CONF2_RESET (1 << 4)
-#define CONF2_PHYPWRDN (1 << 3)
-#define CONF2_OTGPWRDN (1 << 2)
-#define CONF2_DATPOL (1 << 1)
-
-/* TI81XX specific definitions */
-#define USBCTRL0 0x620
-#define USBSTAT0 0x624
-
-/* TI816X PHY controls bits */
-#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
-#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
-
-/* TI814X PHY controls bits */
-#define USBPHY_CM_PWRDN (1 << 0)
-#define USBPHY_OTG_PWRDN (1 << 1)
-#define USBPHY_CHGDET_DIS (1 << 2)
-#define USBPHY_CHGDET_RSTRT (1 << 3)
-#define USBPHY_SRCONDM (1 << 4)
-#define USBPHY_SINKONDP (1 << 5)
-#define USBPHY_CHGISINK_EN (1 << 6)
-#define USBPHY_CHGVSRC_EN (1 << 7)
-#define USBPHY_DMPULLUP (1 << 8)
-#define USBPHY_DPPULLUP (1 << 9)
-#define USBPHY_CDET_EXTCTL (1 << 10)
-#define USBPHY_GPIO_MODE (1 << 12)
-#define USBPHY_DPOPBUFCTL (1 << 13)
-#define USBPHY_DMOPBUFCTL (1 << 14)
-#define USBPHY_DPINPUT (1 << 15)
-#define USBPHY_DMINPUT (1 << 16)
-#define USBPHY_DPGPIO_PD (1 << 17)
-#define USBPHY_DMGPIO_PD (1 << 18)
-#define USBPHY_OTGVDET_EN (1 << 19)
-#define USBPHY_OTGSESSEND_EN (1 << 20)
-#define USBPHY_DATA_POLARITY (1 << 23)
-
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
-u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
-u32 omap1_usb1_init(unsigned nwires);
-u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
-#else
-static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
-{
- return 0;
-}
-static inline u32 omap1_usb1_init(unsigned nwires)
-{
- return 0;
-
-}
-static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
- return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_OMAP_USB_H */
#include <linux/init.h>
#include <linux/io.h>
+#include <asm/fncpy.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
-#include <plat/sram.h>
-#include <plat/cpu.h>
-
-#include "sram.h"
-
-/* XXX These "sideways" includes will disappear when sram.c becomes a driver */
-#include "../mach-omap2/iomap.h"
-#include "../mach-omap2/prm2xxx_3xxx.h"
-#include "../mach-omap2/sdrc.h"
-
-#define OMAP1_SRAM_PA 0x20000000
-#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
-#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA
-#else
-#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
-#endif
-#define OMAP5_SRAM_PA 0x40300000
-
-#if defined(CONFIG_ARCH_OMAP2PLUS)
-#define SRAM_BOOTLOADER_SZ 0x00
-#else
-#define SRAM_BOOTLOADER_SZ 0x80
-#endif
-
-#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
-
-#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
-
-#define GP_DEVICE 0x300
-
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
-static unsigned long omap_sram_start;
static void __iomem *omap_sram_base;
static unsigned long omap_sram_skip;
static unsigned long omap_sram_size;
static void __iomem *omap_sram_ceil;
-/*
- * Depending on the target RAMFS firewall setup, the public usable amount of
- * SRAM varies. The default accessible size for all device types is 2k. A GP
- * device allows ARM11 but not other initiators for full size. This
- * functionality seems ok until some nice security API happens.
- */
-static int is_sram_locked(void)
-{
- if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
- /* RAMFW: R/W access to all initiators for all qualifier sets */
- if (cpu_is_omap242x()) {
- __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
- __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
- __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
- }
- if (cpu_is_omap34xx()) {
- __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
- __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
- __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
- __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
- __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
- }
- return 0;
- } else
- return 1; /* assume locked with no PPA or security driver */
-}
-
-/*
- * The amount of SRAM depends on the core type.
- * Note that we cannot try to test for SRAM here because writes
- * to secure SRAM will hang the system. Also the SRAM is not
- * yet mapped at this point.
- */
-static void __init omap_detect_sram(void)
-{
- omap_sram_skip = SRAM_BOOTLOADER_SZ;
- if (cpu_class_is_omap2()) {
- if (is_sram_locked()) {
- if (cpu_is_omap34xx()) {
- omap_sram_start = OMAP3_SRAM_PUB_PA;
- if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
- (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
- omap_sram_size = 0x7000; /* 28K */
- omap_sram_skip += SZ_16K;
- } else {
- omap_sram_size = 0x8000; /* 32K */
- }
- } else if (cpu_is_omap44xx()) {
- omap_sram_start = OMAP4_SRAM_PUB_PA;
- omap_sram_size = 0xa000; /* 40K */
- } else if (soc_is_omap54xx()) {
- omap_sram_start = OMAP5_SRAM_PA;
- omap_sram_size = SZ_128K; /* 128KB */
- } else {
- omap_sram_start = OMAP2_SRAM_PUB_PA;
- omap_sram_size = 0x800; /* 2K */
- }
- } else {
- if (soc_is_am33xx()) {
- omap_sram_start = AM33XX_SRAM_PA;
- omap_sram_size = 0x10000; /* 64K */
- } else if (cpu_is_omap34xx()) {
- omap_sram_start = OMAP3_SRAM_PA;
- omap_sram_size = 0x10000; /* 64K */
- } else if (cpu_is_omap44xx()) {
- omap_sram_start = OMAP4_SRAM_PA;
- omap_sram_size = 0xe000; /* 56K */
- } else if (soc_is_omap54xx()) {
- omap_sram_start = OMAP5_SRAM_PA;
- omap_sram_size = SZ_128K; /* 128KB */
- } else {
- omap_sram_start = OMAP2_SRAM_PA;
- if (cpu_is_omap242x())
- omap_sram_size = 0xa0000; /* 640K */
- else if (cpu_is_omap243x())
- omap_sram_size = 0x10000; /* 64K */
- }
- }
- } else {
- omap_sram_start = OMAP1_SRAM_PA;
-
- if (cpu_is_omap7xx())
- omap_sram_size = 0x32000; /* 200K */
- else if (cpu_is_omap15xx())
- omap_sram_size = 0x30000; /* 192K */
- else if (cpu_is_omap1610() || cpu_is_omap1611() ||
- cpu_is_omap1621() || cpu_is_omap1710())
- omap_sram_size = 0x4000; /* 16K */
- else {
- pr_err("Could not detect SRAM size\n");
- omap_sram_size = 0x4000;
- }
- }
-}
-
-/*
- * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
- */
-static void __init omap_map_sram(void)
-{
- int cached = 1;
-
- if (omap_sram_size == 0)
- return;
-
-#ifdef CONFIG_OMAP4_ERRATA_I688
- if (cpu_is_omap44xx()) {
- omap_sram_start += PAGE_SIZE;
- omap_sram_size -= SZ_16K;
- }
-#endif
- if (cpu_is_omap34xx()) {
- /*
- * SRAM must be marked as non-cached on OMAP3 since the
- * CORE DPLL M2 divider change code (in SRAM) runs with the
- * SDRAM controller disabled, and if it is marked cached,
- * the ARM may attempt to write cache lines back to SDRAM
- * which will cause the system to hang.
- */
- cached = 0;
- }
-
- omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
- omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size,
- cached);
- if (!omap_sram_base) {
- pr_err("SRAM: Could not map\n");
- return;
- }
-
- omap_sram_ceil = omap_sram_base + omap_sram_size;
-
- /*
- * Looks like we need to preserve some bootloader code at the
- * beginning of SRAM for jumping to flash for reboot to work...
- */
- memset_io(omap_sram_base + omap_sram_skip, 0,
- omap_sram_size - omap_sram_skip);
-}
-
/*
* Memory allocator for SRAM: calculates the new ceiling address
* for pushing a function using the fncpy API.
return (void *)omap_sram_ceil;
}
-#ifdef CONFIG_ARCH_OMAP1
-
-static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
-
-void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
-{
- BUG_ON(!_omap_sram_reprogram_clock);
- /* On 730, bit 13 must always be 1 */
- if (cpu_is_omap7xx())
- ckctl |= 0x2000;
- _omap_sram_reprogram_clock(dpllctl, ckctl);
-}
-
-static int __init omap1_sram_init(void)
-{
- _omap_sram_reprogram_clock =
- omap_sram_push(omap1_sram_reprogram_clock,
- omap1_sram_reprogram_clock_sz);
-
- return 0;
-}
-
-#else
-#define omap1_sram_init() do {} while (0)
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-
-static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-
-void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock)
-{
- BUG_ON(!_omap2_sram_ddr_init);
- _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
- base_cs, force_unlock);
-}
-
-static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
- u32 mem_type);
-
-void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
-{
- BUG_ON(!_omap2_sram_reprogram_sdrc);
- _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
-}
-
-static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
-{
- BUG_ON(!_omap2_set_prcm);
- return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2420
-static int __init omap242x_sram_init(void)
-{
- _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
- omap242x_sram_ddr_init_sz);
-
- _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
- omap242x_sram_reprogram_sdrc_sz);
-
- _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
- omap242x_sram_set_prcm_sz);
-
- return 0;
-}
-#else
-static inline int omap242x_sram_init(void)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-static int __init omap243x_sram_init(void)
-{
- _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
- omap243x_sram_ddr_init_sz);
-
- _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
- omap243x_sram_reprogram_sdrc_sz);
-
- _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
- omap243x_sram_set_prcm_sz);
-
- return 0;
-}
-#else
-static inline int omap243x_sram_init(void)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-
-static u32 (*_omap3_sram_configure_core_dpll)(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-
-u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
-{
- BUG_ON(!_omap3_sram_configure_core_dpll);
- return _omap3_sram_configure_core_dpll(
- m2, unlock_dll, f, inc,
- sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
- sdrc_actim_ctrl_b_0, sdrc_mr_0,
- sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
- sdrc_actim_ctrl_b_1, sdrc_mr_1);
-}
-
-void omap3_sram_restore_context(void)
+/*
+ * The SRAM context is lost during off-idle and stack
+ * needs to be reset.
+ */
+void omap_sram_reset(void)
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
-
- _omap3_sram_configure_core_dpll =
- omap_sram_push(omap3_sram_configure_core_dpll,
- omap3_sram_configure_core_dpll_sz);
- omap_push_sram_idle();
}
-static inline int omap34xx_sram_init(void)
-{
- omap3_sram_restore_context();
- return 0;
-}
-#else
-static inline int omap34xx_sram_init(void)
-{
- return 0;
-}
-#endif /* CONFIG_ARCH_OMAP3 */
-
-static inline int am33xx_sram_init(void)
+/*
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
+ */
+void __init omap_map_sram(unsigned long start, unsigned long size,
+ unsigned long skip, int cached)
{
- return 0;
-}
+ if (size == 0)
+ return;
-int __init omap_sram_init(void)
-{
- omap_detect_sram();
- omap_map_sram();
+ start = ROUND_DOWN(start, PAGE_SIZE);
+ omap_sram_size = size;
+ omap_sram_skip = skip;
+ omap_sram_base = __arm_ioremap_exec(start, size, cached);
+ if (!omap_sram_base) {
+ pr_err("SRAM: Could not map\n");
+ return;
+ }
- if (!(cpu_class_is_omap2()))
- omap1_sram_init();
- else if (cpu_is_omap242x())
- omap242x_sram_init();
- else if (cpu_is_omap2430())
- omap243x_sram_init();
- else if (soc_is_am33xx())
- am33xx_sram_init();
- else if (cpu_is_omap34xx())
- omap34xx_sram_init();
+ omap_sram_reset();
- return 0;
+ /*
+ * Looks like we need to preserve some bootloader code at the
+ * beginning of SRAM for jumping to flash for reboot to work...
+ */
+ memset_io(omap_sram_base + omap_sram_skip, 0,
+ omap_sram_size - omap_sram_skip);
}
+++ /dev/null
-#ifndef __PLAT_OMAP_SRAM_H__
-#define __PLAT_OMAP_SRAM_H__
-
-extern int __init omap_sram_init(void);
-
-#endif /* __PLAT_OMAP_SRAM_H__ */
elf_hwcap |= HWCAP_VFPv3;
/*
- * Check for VFPv3 D16. CPUs in this configuration
- * only have 16 x 64bit registers.
+ * Check for VFPv3 D16 and VFPv4 D16. CPUs in
+ * this configuration only have 16 x 64bit
+ * registers.
*/
if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
- elf_hwcap |= HWCAP_VFPv3D16;
+ elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */
+ else
+ elf_hwcap |= HWCAP_VFPD32;
}
#endif
/*
*pages = NULL;
}
EXPORT_SYMBOL_GPL(free_xenballooned_pages);
+
+/* In the hypervisor.S file. */
+EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_xen_version);
+EXPORT_SYMBOL_GPL(HYPERVISOR_console_io);
+EXPORT_SYMBOL_GPL(HYPERVISOR_sched_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_hvm_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op);
+EXPORT_SYMBOL_GPL(privcmd_call);
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/opcodes-virt.h>
#include <xen/interface/xen.h>
-/* HVC 0xEA1 */
-#ifdef CONFIG_THUMB2_KERNEL
-#define xen_hvc .word 0xf7e08ea1
-#else
-#define xen_hvc .word 0xe140ea71
-#endif
+#define XEN_IMM 0xEA1
#define HYPERCALL_SIMPLE(hypercall) \
ENTRY(HYPERVISOR_##hypercall) \
mov r12, #__HYPERVISOR_##hypercall; \
- xen_hvc; \
+ __HVC(XEN_IMM); \
mov pc, lr; \
ENDPROC(HYPERVISOR_##hypercall)
stmdb sp!, {r4} \
ldr r4, [sp, #4] \
mov r12, #__HYPERVISOR_##hypercall; \
- xen_hvc \
+ __HVC(XEN_IMM); \
ldm sp!, {r4} \
mov pc, lr \
ENDPROC(HYPERVISOR_##hypercall)
mov r2, r3
ldr r3, [sp, #8]
ldr r4, [sp, #4]
- xen_hvc
+ __HVC(XEN_IMM)
ldm sp!, {r4}
mov pc, lr
ENDPROC(privcmd_call);
config ARM64
def_bool y
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+ select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
select GENERIC_CLOCKEVENTS
select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IOMAP
#include <asm/user.h>
typedef unsigned long elf_greg_t;
-typedef unsigned long elf_freg_t[3];
#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fp elf_fpregset_t;
+typedef struct user_fpsimd_state elf_fpregset_t;
#define EM_AARCH64 183
#define R_AARCH64_MOVW_PREL_G2_NC 292
#define R_AARCH64_MOVW_PREL_G3 293
-
/*
* These are used to set parameters in the core dumps.
*/
* - FPSR and FPCR
* - 32 128-bit data registers
*
- * Note that user_fp forms a prefix of this structure, which is relied
- * upon in the ptrace FP/SIMD accessors. struct user_fpsimd_state must
- * form a prefix of struct fpsimd_state.
+ * Note that user_fpsimd forms a prefix of this structure, which is
+ * relied upon in the ptrace FP/SIMD accessors.
*/
struct fpsimd_state {
union {
* I/O port access primitives.
*/
#define IO_SPACE_LIMIT 0xffff
-#define PCI_IOBASE ((void __iomem *)0xffffffbbfffe0000UL)
+#define PCI_IOBASE ((void __iomem *)(MODULES_VADDR - SZ_2M))
static inline u8 inb(unsigned long addr)
{
#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_XN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC))
-#define ioremap(addr, size) __ioremap((addr), (size), PROT_DEVICE_nGnRE)
-#define ioremap_nocache(addr, size) __ioremap((addr), (size), PROT_DEVICE_nGnRE)
-#define ioremap_wc(addr, size) __ioremap((addr), (size), PROT_NORMAL_NC)
+#define ioremap(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
+#define ioremap_nocache(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
+#define ioremap_wc(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
#define iounmap __iounmap
#define ARCH_HAS_IOREMAP_WC
#else
#define STACK_TOP STACK_TOP_MAX
#endif /* CONFIG_COMPAT */
+
+#define ARCH_LOW_ADDRESS_LIMIT PHYS_MASK
#endif /* __KERNEL__ */
struct debug_info {
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef CONFIG_COMPAT
-#define __ARCH_WANT_COMPAT_IPC_PARSE_VERSION
#define __ARCH_WANT_COMPAT_STAT64
#define __ARCH_WANT_SYS_GETHOSTNAME
#define __ARCH_WANT_SYS_PAUSE
ARMV8_PMUV3_PERFCTR_BUS_ACCESS = 0x19,
ARMV8_PMUV3_PERFCTR_MEM_ERROR = 0x1A,
ARMV8_PMUV3_PERFCTR_BUS_CYCLES = 0x1D,
-
- /*
- * This isn't an architected event.
- * We detect this event number and use the cycle counter instead.
- */
- ARMV8_PMUV3_PERFCTR_CPU_CYCLES = 0xFF,
};
/* PMUv3 HW events mapping. */
static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV8_PMUV3_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES,
[PERF_COUNT_HW_INSTRUCTIONS] = ARMV8_PMUV3_PERFCTR_INSTR_EXECUTED,
[PERF_COUNT_HW_CACHE_REFERENCES] = ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS,
[PERF_COUNT_HW_CACHE_MISSES] = ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL,
unsigned long evtype = event->config_base & ARMV8_EVTYPE_EVENT;
/* Always place a cycle counter into the cycle counter. */
- if (evtype == ARMV8_PMUV3_PERFCTR_CPU_CYCLES) {
+ if (evtype == ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES) {
if (test_and_set_bit(ARMV8_IDX_CYCLE_COUNTER, cpuc->used_mask))
return -EAGAIN;
return last;
}
-/*
- * Fill in the task's elfregs structure for a core dump.
- */
-int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
-{
- elf_core_copy_regs(elfregs, task_pt_regs(t));
- return 1;
-}
-
-/*
- * fill in the fpe structure for a core dump...
- */
-int dump_fpu (struct pt_regs *regs, struct user_fp *fp)
-{
- return 0;
-}
-EXPORT_SYMBOL(dump_fpu);
-
/*
* Shuffle the argument into the correct register before calling the
* thread function. x1 is the thread argument, x2 is the pointer to
* before we continue.
*/
set_cpu_online(cpu, true);
- while (!cpu_active(cpu))
- cpu_relax();
+ complete(&cpu_running);
/*
* OK, it's off to the idle thread for us
#ifdef CONFIG_ZONE_DMA32
/* 4GB maximum for 32-bit only capable devices */
max_dma32 = min(max, MAX_DMA32_PFN);
- zone_size[ZONE_DMA32] = max_dma32 - min;
+ zone_size[ZONE_DMA32] = max(min, max_dma32) - min;
#endif
zone_size[ZONE_NORMAL] = max - max_dma32;
select GENERIC_CPU_DEVICES
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_KERNEL_THREAD
+ select GENERIC_KERNEL_EXECVE
config ZONE_DMA
bool
INITRD_PHYS = 0x02180000
INITRD_VIRT = 0x02180000
+OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment
+
#
# If you don't define ZRELADDR above,
# then it defaults to ZTEXTADDR
targets: $(obj)/Image
$(obj)/Image: vmlinux FORCE
- $(OBJCOPY) -O binary -R .note -R .comment -S vmlinux $@
+ $(OBJCOPY) $(OBJCOPYFLAGS) -S vmlinux $@
#$(obj)/Image: $(CONFIGURE) $(SYSTEM)
-# $(OBJCOPY) -O binary -R .note -R .comment -g -S $(SYSTEM) $@
+# $(OBJCOPY) $(OBJCOPYFLAGS) -g -S $(SYSTEM) $@
bzImage: zImage
zImage: $(CONFIGURE) compressed/$(LINUX)
- $(OBJCOPY) -O binary -R .note -R .comment -S compressed/$(LINUX) $@
+ $(OBJCOPY) $(OBJCOPYFLAGS) -S compressed/$(LINUX) $@
bootpImage: bootp/bootp
- $(OBJCOPY) -O binary -R .note -R .comment -S bootp/bootp $@
+ $(OBJCOPY) $(OBJCOPYFLAGS) -S bootp/bootp $@
compressed/$(LINUX): $(LINUX) dep
@$(MAKE) -C compressed $(LINUX)
#define __ARCH_WANT_SYS_RT_SIGACTION
#define __ARCH_WANT_SYS_RT_SIGSUSPEND
#define __ARCH_WANT_SYS_EXECVE
-#define __ARCH_WANT_KERNEL_EXECVE
/*
* "Conditional" syscalls
call schedule_tail
calll.p @(gr21,gr0)
or gr20,gr20,gr8
- bra sys_exit
-
- .globl ret_from_kernel_execve
-ret_from_kernel_execve:
- ori gr28,0,sp
bra __syscall_exit
###################################################################################################
subicc gr5,#0,gr0,icc0
beq icc0,#0,__entry_return_direct
-__entry_preempt_need_resched:
- ldi @(gr15,#TI_FLAGS),gr4
- andicc gr4,#_TIF_NEED_RESCHED,gr0,icc0
- beq icc0,#1,__entry_return_direct
-
- setlos #PREEMPT_ACTIVE,gr5
- sti gr5,@(gr15,#TI_FLAGS)
-
- andi gr23,#~PSR_PIL,gr23
- movgs gr23,psr
-
- call schedule
- sti gr0,@(gr15,#TI_PRE_COUNT)
-
- movsg psr,gr23
- ori gr23,#PSR_PIL_14,gr23
- movgs gr23,psr
- bra __entry_preempt_need_resched
-#else
- bra __entry_return_direct
+ subcc gr0,gr0,gr0,icc2 /* set Z and clear C */
+ call preempt_schedule_irq
#endif
+ bra __entry_return_direct
###############################################################################
childregs = (struct pt_regs *)
(task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE);
+ /* set up the userspace frame (the only place that the USP is stored) */
+ *childregs = *__kernel_frame0_ptr;
+
p->set_child_tid = p->clear_child_tid = NULL;
p->thread.frame = childregs;
p->thread.frame0 = childregs;
if (unlikely(!regs)) {
- memset(childregs, 0, sizeof(struct pt_regs));
childregs->gr9 = usp; /* function */
childregs->gr8 = arg;
- childregs->psr = PSR_S;
p->thread.pc = (unsigned long) ret_from_kernel_thread;
save_user_regs(p->thread.user);
return 0;
#include <linux/types.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/dma-mapping.h>
#include <linux/list.h>
#include <linux/pci.h>
#define __ARCH_H8300_CACHE_H
/* bytes per L1 cache line */
-#define L1_CACHE_BYTES 4
+#define L1_CACHE_SHIFT 2
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
/* m68k-elf-gcc 2.95.2 doesn't like these */
#define LPM_ANYPATH 0xff
#define __MAX_CSSID 0
+#define __MAX_SUBCHANNEL 65535
+#define __MAX_SSID 3
#include <asm/scsw.h>
static inline int pmd_present(pmd_t pmd)
{
- return (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) != 0UL;
+ unsigned long mask = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO;
+ return (pmd_val(pmd) & mask) == _HPAGE_TYPE_NONE ||
+ !(pmd_val(pmd) & _SEGMENT_ENTRY_INV);
}
static inline int pmd_none(pmd_t pmd)
{
- return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) != 0UL;
+ return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) &&
+ !(pmd_val(pmd) & _SEGMENT_ENTRY_RO);
}
static inline int pmd_large(pmd_t pmd)
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+
+#define SEGMENT_NONE __pgprot(_HPAGE_TYPE_NONE)
+#define SEGMENT_RO __pgprot(_HPAGE_TYPE_RO)
+#define SEGMENT_RW __pgprot(_HPAGE_TYPE_RW)
+
#define __HAVE_ARCH_PGTABLE_DEPOSIT
extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pgtable_t pgtable);
static inline unsigned long massage_pgprot_pmd(pgprot_t pgprot)
{
- unsigned long pgprot_pmd = 0;
-
- if (pgprot_val(pgprot) & _PAGE_INVALID) {
- if (pgprot_val(pgprot) & _PAGE_SWT)
- pgprot_pmd |= _HPAGE_TYPE_NONE;
- pgprot_pmd |= _SEGMENT_ENTRY_INV;
- }
- if (pgprot_val(pgprot) & _PAGE_RO)
- pgprot_pmd |= _SEGMENT_ENTRY_RO;
- return pgprot_pmd;
+ /*
+ * pgprot is PAGE_NONE, PAGE_RO, or PAGE_RW (see __Pxxx / __Sxxx)
+ * Convert to segment table entry format.
+ */
+ if (pgprot_val(pgprot) == pgprot_val(PAGE_NONE))
+ return pgprot_val(SEGMENT_NONE);
+ if (pgprot_val(pgprot) == pgprot_val(PAGE_RO))
+ return pgprot_val(SEGMENT_RO);
+ return pgprot_val(SEGMENT_RW);
}
static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
static inline pmd_t pmd_mkwrite(pmd_t pmd)
{
- pmd_val(pmd) &= ~_SEGMENT_ENTRY_RO;
+ /* Do not clobber _HPAGE_TYPE_NONE pages! */
+ if (!(pmd_val(pmd) & _SEGMENT_ENTRY_INV))
+ pmd_val(pmd) &= ~_SEGMENT_ENTRY_RO;
return pmd;
}
#endif
mvc .LoldpswS1-.LbaseS1(16,%r13),0(%r8)
mvc 0(16,%r8),0(%r9)
+#ifdef CONFIG_64BIT
+ epsw %r6,%r7 # set current addressing mode
+ nill %r6,0x1 # in new psw (31 or 64 bit mode)
+ nilh %r7,0x8000
+ stm %r6,%r7,0(%r8)
+#endif
lhi %r6,0x0200 # cr mask for ext int (cr0.54)
ltr %r2,%r2
jz .LsetctS1
.long 0x00080000, 0x80000000+.LwaitS1 # PSW to handle ext int
#ifdef CONFIG_64BIT
.LextpswS1_64:
- .quad 0x0000000180000000, .LwaitS1 # PSW to handle ext int, 64 bit
+ .quad 0, .LwaitS1 # PSW to handle ext int, 64 bit
#endif
.LwaitpswS1:
.long 0x010a0000, 0x00000000+.LloopS1 # PSW to wait for ext int
pmd = pmd_offset(pud, addr);
if (pmd_none(*pmd))
return -0x10UL;
- if (pmd_huge(*pmd)) {
+ if (pmd_large(*pmd)) {
if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO))
return -0x04UL;
return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK);
*/
if (pmd_none(pmd) || pmd_trans_splitting(pmd))
return 0;
- if (unlikely(pmd_huge(pmd))) {
+ if (unlikely(pmd_large(pmd))) {
if (!gup_huge_pmd(pmdp, pmd, addr, next,
write, pages, nr))
return 0;
select HAVE_ARCH_TRACEHOOK
select SYSCTL_EXCEPTION_TRACE
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select RTC_CLASS
select RTC_DRV_M48T59
select HAVE_IRQ_WORK
obj-$(CONFIG_CRYPTO_CRC32C_SPARC64) += crc32c-sparc64.o
-sha1-sparc64-y := sha1_asm.o sha1_glue.o crop_devid.o
-sha256-sparc64-y := sha256_asm.o sha256_glue.o crop_devid.o
-sha512-sparc64-y := sha512_asm.o sha512_glue.o crop_devid.o
-md5-sparc64-y := md5_asm.o md5_glue.o crop_devid.o
+sha1-sparc64-y := sha1_asm.o sha1_glue.o
+sha256-sparc64-y := sha256_asm.o sha256_glue.o
+sha512-sparc64-y := sha512_asm.o sha512_glue.o
+md5-sparc64-y := md5_asm.o md5_glue.o
-aes-sparc64-y := aes_asm.o aes_glue.o crop_devid.o
-des-sparc64-y := des_asm.o des_glue.o crop_devid.o
-camellia-sparc64-y := camellia_asm.o camellia_glue.o crop_devid.o
+aes-sparc64-y := aes_asm.o aes_glue.o
+des-sparc64-y := des_asm.o des_glue.o
+camellia-sparc64-y := camellia_asm.o camellia_glue.o
-crc32c-sparc64-y := crc32c_asm.o crc32c_glue.o crop_devid.o
+crc32c-sparc64-y := crc32c_asm.o crc32c_glue.o
MODULE_DESCRIPTION("AES Secure Hash Algorithm, sparc64 aes opcode accelerated");
MODULE_ALIAS("aes");
+
+#include "crop_devid.c"
MODULE_DESCRIPTION("Camellia Cipher Algorithm, sparc64 camellia opcode accelerated");
MODULE_ALIAS("aes");
+
+#include "crop_devid.c"
MODULE_DESCRIPTION("CRC32c (Castagnoli), sparc64 crc32c opcode accelerated");
MODULE_ALIAS("crc32c");
+
+#include "crop_devid.c"
MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms, sparc64 des opcode accelerated");
MODULE_ALIAS("des");
+
+#include "crop_devid.c"
MODULE_DESCRIPTION("MD5 Secure Hash Algorithm, sparc64 md5 opcode accelerated");
MODULE_ALIAS("md5");
+
+#include "crop_devid.c"
MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, sparc64 sha1 opcode accelerated");
MODULE_ALIAS("sha1");
+
+#include "crop_devid.c"
MODULE_ALIAS("sha224");
MODULE_ALIAS("sha256");
+
+#include "crop_devid.c"
MODULE_ALIAS("sha384");
MODULE_ALIAS("sha512");
+
+#include "crop_devid.c"
/* atomic.h: Thankfully the V9 is at least reasonable for this
* stuff.
*
- * Copyright (C) 1996, 1997, 2000 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1996, 1997, 2000, 2012 David S. Miller (davem@redhat.com)
*/
#ifndef __ARCH_SPARC64_ATOMIC__
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+extern long atomic64_dec_if_positive(atomic64_t *v);
+
/* Atomic operations are already serializing */
#define smp_mb__before_atomic_dec() barrier()
#define smp_mb__after_atomic_dec() barrier()
#ifndef _SPARC64_BACKOFF_H
#define _SPARC64_BACKOFF_H
+/* The macros in this file implement an exponential backoff facility
+ * for atomic operations.
+ *
+ * When multiple threads compete on an atomic operation, it is
+ * possible for one thread to be continually denied a successful
+ * completion of the compare-and-swap instruction. Heavily
+ * threaded cpu implementations like Niagara can compound this
+ * problem even further.
+ *
+ * When an atomic operation fails and needs to be retried, we spin a
+ * certain number of times. At each subsequent failure of the same
+ * operation we double the spin count, realizing an exponential
+ * backoff.
+ *
+ * When we spin, we try to use an operation that will cause the
+ * current cpu strand to block, and therefore make the core fully
+ * available to any other other runnable strands. There are two
+ * options, based upon cpu capabilities.
+ *
+ * On all cpus prior to SPARC-T4 we do three dummy reads of the
+ * condition code register. Each read blocks the strand for something
+ * between 40 and 50 cpu cycles.
+ *
+ * For SPARC-T4 and later we have a special "pause" instruction
+ * available. This is implemented using writes to register %asr27.
+ * The cpu will block the number of cycles written into the register,
+ * unless a disrupting trap happens first. SPARC-T4 specifically
+ * implements pause with a granularity of 8 cycles. Each strand has
+ * an internal pause counter which decrements every 8 cycles. So the
+ * chip shifts the %asr27 value down by 3 bits, and writes the result
+ * into the pause counter. If a value smaller than 8 is written, the
+ * chip blocks for 1 cycle.
+ *
+ * To achieve the same amount of backoff as the three %ccr reads give
+ * on earlier chips, we shift the backoff value up by 7 bits. (Three
+ * %ccr reads block for about 128 cycles, 1 << 7 == 128) We write the
+ * whole amount we want to block into the pause register, rather than
+ * loop writing 128 each time.
+ */
+
#define BACKOFF_LIMIT (4 * 1024)
#ifdef CONFIG_SMP
#define BACKOFF_LABEL(spin_label, continue_label) \
spin_label
-#define BACKOFF_SPIN(reg, tmp, label) \
- mov reg, tmp; \
-88: brnz,pt tmp, 88b; \
- sub tmp, 1, tmp; \
- set BACKOFF_LIMIT, tmp; \
- cmp reg, tmp; \
- bg,pn %xcc, label; \
- nop; \
- ba,pt %xcc, label; \
- sllx reg, 1, reg;
+#define BACKOFF_SPIN(reg, tmp, label) \
+ mov reg, tmp; \
+88: rd %ccr, %g0; \
+ rd %ccr, %g0; \
+ rd %ccr, %g0; \
+ .section .pause_3insn_patch,"ax";\
+ .word 88b; \
+ sllx tmp, 7, tmp; \
+ wr tmp, 0, %asr27; \
+ clr tmp; \
+ .previous; \
+ brnz,pt tmp, 88b; \
+ sub tmp, 1, tmp; \
+ set BACKOFF_LIMIT, tmp; \
+ cmp reg, tmp; \
+ bg,pn %xcc, label; \
+ nop; \
+ ba,pt %xcc, label; \
+ sllx reg, 1, reg;
#else
struct pt_regs *regs = current_thread_info()->kregs;
unsigned long usp = regs->u_regs[UREG_I6];
- if (!(test_thread_flag(TIF_32BIT)))
+ if (test_thread_64bit_stack(usp))
usp += STACK_BIAS;
- else
+
+ if (test_thread_flag(TIF_32BIT))
usp &= 0xffffffffUL;
usp -= len;
#define KSTK_EIP(tsk) (task_pt_regs(tsk)->tpc)
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->u_regs[UREG_FP])
-#define cpu_relax() barrier()
+/* Please see the commentary in asm/backoff.h for a description of
+ * what these instructions are doing and how they have been choosen.
+ * To make a long story short, we are trying to yield the current cpu
+ * strand during busy loops.
+ */
+#define cpu_relax() asm volatile("\n99:\n\t" \
+ "rd %%ccr, %%g0\n\t" \
+ "rd %%ccr, %%g0\n\t" \
+ "rd %%ccr, %%g0\n\t" \
+ ".section .pause_3insn_patch,\"ax\"\n\t"\
+ ".word 99b\n\t" \
+ "wr %%g0, 128, %%asr27\n\t" \
+ "nop\n\t" \
+ "nop\n\t" \
+ ".previous" \
+ ::: "memory")
/* Prefetch support. This is tuned for UltraSPARC-III and later.
* UltraSPARC-I will treat these as nops, and UltraSPARC-II has
extern void irq_trans_init(struct device_node *dp);
extern char *build_path_component(struct device_node *dp);
+/* SPARC has a local implementation */
+extern int of_address_to_resource(struct device_node *dev, int index,
+ struct resource *r);
+#define of_address_to_resource of_address_to_resource
+
#endif /* __KERNEL__ */
#endif /* _SPARC_PROM_H */
#define tsk_is_polling(t) test_tsk_thread_flag(t, TIF_POLLING_NRFLAG)
+#define thread32_stack_is_64bit(__SP) (((__SP) & 0x1) != 0)
+#define test_thread_64bit_stack(__SP) \
+ ((test_thread_flag(TIF_32BIT) && !thread32_stack_is_64bit(__SP)) ? \
+ false : true)
+
#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */
/* Normal 32bit spill */
#define SPILL_2_GENERIC(ASI) \
- srl %sp, 0, %sp; \
+ and %sp, 1, %g3; \
+ brnz,pn %g3, (. - (128 + 4)); \
+ srl %sp, 0, %sp; \
stwa %l0, [%sp + %g0] ASI; \
mov 0x04, %g3; \
stwa %l1, [%sp + %g3] ASI; \
stwa %i6, [%g1 + %g0] ASI; \
stwa %i7, [%g1 + %g3] ASI; \
saved; \
- retry; nop; nop; \
+ retry; \
b,a,pt %xcc, spill_fixup_dax; \
b,a,pt %xcc, spill_fixup_mna; \
b,a,pt %xcc, spill_fixup;
#define SPILL_2_GENERIC_ETRAP \
etrap_user_spill_32bit: \
- srl %sp, 0, %sp; \
+ and %sp, 1, %g3; \
+ brnz,pn %g3, etrap_user_spill_64bit; \
+ srl %sp, 0, %sp; \
stwa %l0, [%sp + 0x00] %asi; \
stwa %l1, [%sp + 0x04] %asi; \
stwa %l2, [%sp + 0x08] %asi; \
ba,pt %xcc, etrap_save; \
wrpr %g1, %cwp; \
nop; nop; nop; nop; \
- nop; nop; nop; nop; \
+ nop; nop; \
ba,a,pt %xcc, etrap_spill_fixup_32bit; \
ba,a,pt %xcc, etrap_spill_fixup_32bit; \
ba,a,pt %xcc, etrap_spill_fixup_32bit;
/* Normal 32bit fill */
#define FILL_2_GENERIC(ASI) \
- srl %sp, 0, %sp; \
+ and %sp, 1, %g3; \
+ brnz,pn %g3, (. - (128 + 4)); \
+ srl %sp, 0, %sp; \
lduwa [%sp + %g0] ASI, %l0; \
mov 0x04, %g2; \
mov 0x08, %g3; \
lduwa [%g1 + %g3] ASI, %i6; \
lduwa [%g1 + %g5] ASI, %i7; \
restored; \
- retry; nop; nop; nop; nop; \
+ retry; nop; nop; \
b,a,pt %xcc, fill_fixup_dax; \
b,a,pt %xcc, fill_fixup_mna; \
b,a,pt %xcc, fill_fixup;
#define FILL_2_GENERIC_RTRAP \
user_rtt_fill_32bit: \
- srl %sp, 0, %sp; \
+ and %sp, 1, %g3; \
+ brnz,pn %g3, user_rtt_fill_64bit; \
+ srl %sp, 0, %sp; \
lduwa [%sp + 0x00] %asi, %l0; \
lduwa [%sp + 0x04] %asi, %l1; \
lduwa [%sp + 0x08] %asi, %l2; \
ba,pt %xcc, user_rtt_pre_restore; \
restored; \
nop; nop; nop; nop; nop; \
- nop; nop; nop; nop; nop; \
+ nop; nop; nop; \
ba,a,pt %xcc, user_rtt_fill_fixup; \
ba,a,pt %xcc, user_rtt_fill_fixup; \
ba,a,pt %xcc, user_rtt_fill_fixup;
#define __NR_setns 337
#define __NR_process_vm_readv 338
#define __NR_process_vm_writev 339
+#define __NR_kern_features 340
+#define __NR_kcmp 341
-#define NR_syscalls 340
+#define NR_syscalls 342
+
+/* Bitmask values returned from kern_features system call. */
+#define KERN_FEATURE_MIXED_MODE_STACK 0x00000001
#ifdef __32bit_syscall_numbers__
/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
extern struct popc_6insn_patch_entry __popc_6insn_patch,
__popc_6insn_patch_end;
+struct pause_patch_entry {
+ unsigned int addr;
+ unsigned int insns[3];
+};
+extern struct pause_patch_entry __pause_3insn_patch,
+ __pause_3insn_patch_end;
+
extern void __init per_cpu_patch(void);
extern void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *,
struct sun4v_1insn_patch_entry *);
static void leon_handle_ext_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned int eirq;
+ struct irq_bucket *p;
int cpu = sparc_leon3_cpuid();
eirq = leon_eirq_get(cpu);
- if ((eirq & 0x10) && irq_map[eirq]->irq) /* bit4 tells if IRQ happened */
- generic_handle_irq(irq_map[eirq]->irq);
+ p = irq_map[eirq];
+ if ((eirq & 0x10) && p && p->irq) /* bit4 tells if IRQ happened */
+ generic_handle_irq(p->irq);
}
/* The extended IRQ controller has been found, this function registers it */
ufp = regs->u_regs[UREG_I6] & 0xffffffffUL;
do {
- struct sparc_stackf32 *usf, sf;
unsigned long pc;
- usf = (struct sparc_stackf32 *) ufp;
- if (__copy_from_user_inatomic(&sf, usf, sizeof(sf)))
- break;
+ if (thread32_stack_is_64bit(ufp)) {
+ struct sparc_stackf *usf, sf;
- pc = sf.callers_pc;
- ufp = (unsigned long)sf.fp;
+ ufp += STACK_BIAS;
+ usf = (struct sparc_stackf *) ufp;
+ if (__copy_from_user_inatomic(&sf, usf, sizeof(sf)))
+ break;
+ pc = sf.callers_pc & 0xffffffff;
+ ufp = ((unsigned long) sf.fp) & 0xffffffff;
+ } else {
+ struct sparc_stackf32 *usf, sf;
+ usf = (struct sparc_stackf32 *) ufp;
+ if (__copy_from_user_inatomic(&sf, usf, sizeof(sf)))
+ break;
+ pc = sf.callers_pc;
+ ufp = (unsigned long)sf.fp;
+ }
perf_callchain_store(entry, pc);
} while (entry->nr < PERF_MAX_STACK_DEPTH);
}
/* It's a bit more tricky when 64-bit tasks are involved... */
static unsigned long clone_stackframe(unsigned long csp, unsigned long psp)
{
+ bool stack_64bit = test_thread_64bit_stack(psp);
unsigned long fp, distance, rval;
- if (!(test_thread_flag(TIF_32BIT))) {
+ if (stack_64bit) {
csp += STACK_BIAS;
psp += STACK_BIAS;
__get_user(fp, &(((struct reg_window __user *)psp)->ins[6]));
fp += STACK_BIAS;
+ if (test_thread_flag(TIF_32BIT))
+ fp &= 0xffffffff;
} else
__get_user(fp, &(((struct reg_window32 __user *)psp)->ins[6]));
rval = (csp - distance);
if (copy_in_user((void __user *) rval, (void __user *) psp, distance))
rval = 0;
- else if (test_thread_flag(TIF_32BIT)) {
+ else if (!stack_64bit) {
if (put_user(((u32)csp),
&(((struct reg_window32 __user *)rval)->ins[6])))
rval = 0;
flush_user_windows();
if ((window = get_thread_wsaved()) != 0) {
- int winsize = sizeof(struct reg_window);
- int bias = 0;
-
- if (test_thread_flag(TIF_32BIT))
- winsize = sizeof(struct reg_window32);
- else
- bias = STACK_BIAS;
-
window -= 1;
do {
- unsigned long sp = (t->rwbuf_stkptrs[window] + bias);
struct reg_window *rwin = &t->reg_window[window];
+ int winsize = sizeof(struct reg_window);
+ unsigned long sp;
+
+ sp = t->rwbuf_stkptrs[window];
+
+ if (test_thread_64bit_stack(sp))
+ sp += STACK_BIAS;
+ else
+ winsize = sizeof(struct reg_window32);
if (!copy_to_user((char __user *)sp, rwin, winsize)) {
shift_window_buffer(window, get_thread_wsaved() - 1, t);
{
struct thread_info *t = current_thread_info();
unsigned long window;
- int winsize = sizeof(struct reg_window);
- int bias = 0;
-
- if (test_thread_flag(TIF_32BIT))
- winsize = sizeof(struct reg_window32);
- else
- bias = STACK_BIAS;
flush_user_windows();
window = get_thread_wsaved();
if (likely(window != 0)) {
window -= 1;
do {
- unsigned long sp = (t->rwbuf_stkptrs[window] + bias);
struct reg_window *rwin = &t->reg_window[window];
+ int winsize = sizeof(struct reg_window);
+ unsigned long sp;
+
+ sp = t->rwbuf_stkptrs[window];
+
+ if (test_thread_64bit_stack(sp))
+ sp += STACK_BIAS;
+ else
+ winsize = sizeof(struct reg_window32);
if (unlikely(sp & 0x7UL))
stack_unaligned(sp);
{
unsigned long rw_addr = regs->u_regs[UREG_I6];
- if (test_tsk_thread_flag(current, TIF_32BIT)) {
+ if (!test_thread_64bit_stack(rw_addr)) {
struct reg_window32 win32;
int i;
{
unsigned long rw_addr = regs->u_regs[UREG_I6];
- if (test_tsk_thread_flag(current, TIF_32BIT)) {
+ if (!test_thread_64bit_stack(rw_addr)) {
struct reg_window32 win32;
int i;
}
}
+static void __init pause_patch(void)
+{
+ struct pause_patch_entry *p;
+
+ p = &__pause_3insn_patch;
+ while (p < &__pause_3insn_patch_end) {
+ unsigned long i, addr = p->addr;
+
+ for (i = 0; i < 3; i++) {
+ *(unsigned int *) (addr + (i * 4)) = p->insns[i];
+ wmb();
+ __asm__ __volatile__("flush %0"
+ : : "r" (addr + (i * 4)));
+ }
+
+ p++;
+ }
+}
+
#ifdef CONFIG_SMP
void __init boot_cpu_id_too_large(int cpu)
{
if (sparc64_elf_hwcap & AV_SPARC_POPC)
popc_patch();
+ if (sparc64_elf_hwcap & AV_SPARC_PAUSE)
+ pause_patch();
}
void __init setup_arch(char **cmdline_p)
: "cc");
return __res;
}
+
+asmlinkage long sys_kern_features(void)
+{
+ return KERN_FEATURE_MIXED_MODE_STACK;
+}
/*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
+/*340*/ .long sys_ni_syscall, sys_kcmp
.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
.word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev
+/*340*/ .word sys_kern_features, sys_kcmp
#endif /* CONFIG_COMPAT */
.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
.word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
+/*340*/ .word sys_kern_features, sys_kcmp
static unsigned long fetch_reg(unsigned int reg, struct pt_regs *regs)
{
- unsigned long value;
+ unsigned long value, fp;
if (reg < 16)
return (!reg ? 0 : regs->u_regs[reg]);
+
+ fp = regs->u_regs[UREG_FP];
+
if (regs->tstate & TSTATE_PRIV) {
struct reg_window *win;
- win = (struct reg_window *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window *)(fp + STACK_BIAS);
value = win->locals[reg - 16];
- } else if (test_thread_flag(TIF_32BIT)) {
+ } else if (!test_thread_64bit_stack(fp)) {
struct reg_window32 __user *win32;
- win32 = (struct reg_window32 __user *)((unsigned long)((u32)regs->u_regs[UREG_FP]));
+ win32 = (struct reg_window32 __user *)((unsigned long)((u32)fp));
get_user(value, &win32->locals[reg - 16]);
} else {
struct reg_window __user *win;
- win = (struct reg_window __user *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window __user *)(fp + STACK_BIAS);
get_user(value, &win->locals[reg - 16]);
}
return value;
static unsigned long *fetch_reg_addr(unsigned int reg, struct pt_regs *regs)
{
+ unsigned long fp;
+
if (reg < 16)
return ®s->u_regs[reg];
+
+ fp = regs->u_regs[UREG_FP];
+
if (regs->tstate & TSTATE_PRIV) {
struct reg_window *win;
- win = (struct reg_window *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window *)(fp + STACK_BIAS);
return &win->locals[reg - 16];
- } else if (test_thread_flag(TIF_32BIT)) {
+ } else if (!test_thread_64bit_stack(fp)) {
struct reg_window32 *win32;
- win32 = (struct reg_window32 *)((unsigned long)((u32)regs->u_regs[UREG_FP]));
+ win32 = (struct reg_window32 *)((unsigned long)((u32)fp));
return (unsigned long *)&win32->locals[reg - 16];
} else {
struct reg_window *win;
- win = (struct reg_window *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window *)(fp + STACK_BIAS);
return &win->locals[reg - 16];
}
}
if (rd)
regs->u_regs[rd] = ret;
} else {
- if (test_thread_flag(TIF_32BIT)) {
+ unsigned long fp = regs->u_regs[UREG_FP];
+
+ if (!test_thread_64bit_stack(fp)) {
struct reg_window32 __user *win32;
- win32 = (struct reg_window32 __user *)((unsigned long)((u32)regs->u_regs[UREG_FP]));
+ win32 = (struct reg_window32 __user *)((unsigned long)((u32)fp));
put_user(ret, &win32->locals[rd - 16]);
} else {
struct reg_window __user *win;
- win = (struct reg_window __user *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window __user *)(fp + STACK_BIAS);
put_user(ret, &win->locals[rd - 16]);
}
}
reg[0] = 0;
if ((insn & 0x780000) == 0x180000)
reg[1] = 0;
- } else if (test_thread_flag(TIF_32BIT)) {
+ } else if (!test_thread_64bit_stack(regs->u_regs[UREG_FP])) {
put_user(0, (int __user *) reg);
if ((insn & 0x780000) == 0x180000)
put_user(0, ((int __user *) reg) + 1);
static unsigned long fetch_reg(unsigned int reg, struct pt_regs *regs)
{
- unsigned long value;
+ unsigned long value, fp;
if (reg < 16)
return (!reg ? 0 : regs->u_regs[reg]);
+
+ fp = regs->u_regs[UREG_FP];
+
if (regs->tstate & TSTATE_PRIV) {
struct reg_window *win;
- win = (struct reg_window *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window *)(fp + STACK_BIAS);
value = win->locals[reg - 16];
- } else if (test_thread_flag(TIF_32BIT)) {
+ } else if (!test_thread_64bit_stack(fp)) {
struct reg_window32 __user *win32;
- win32 = (struct reg_window32 __user *)((unsigned long)((u32)regs->u_regs[UREG_FP]));
+ win32 = (struct reg_window32 __user *)((unsigned long)((u32)fp));
get_user(value, &win32->locals[reg - 16]);
} else {
struct reg_window __user *win;
- win = (struct reg_window __user *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window __user *)(fp + STACK_BIAS);
get_user(value, &win->locals[reg - 16]);
}
return value;
static inline unsigned long __user *__fetch_reg_addr_user(unsigned int reg,
struct pt_regs *regs)
{
+ unsigned long fp = regs->u_regs[UREG_FP];
+
BUG_ON(reg < 16);
BUG_ON(regs->tstate & TSTATE_PRIV);
- if (test_thread_flag(TIF_32BIT)) {
+ if (!test_thread_64bit_stack(fp)) {
struct reg_window32 __user *win32;
- win32 = (struct reg_window32 __user *)((unsigned long)((u32)regs->u_regs[UREG_FP]));
+ win32 = (struct reg_window32 __user *)((unsigned long)((u32)fp));
return (unsigned long __user *)&win32->locals[reg - 16];
} else {
struct reg_window __user *win;
- win = (struct reg_window __user *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window __user *)(fp + STACK_BIAS);
return &win->locals[reg - 16];
}
}
} else {
unsigned long __user *rd_user = __fetch_reg_addr_user(rd, regs);
- if (test_thread_flag(TIF_32BIT))
+ if (!test_thread_64bit_stack(regs->u_regs[UREG_FP]))
__put_user((u32)val, (u32 __user *)rd_user);
else
__put_user(val, rd_user);
*(.popc_6insn_patch)
__popc_6insn_patch_end = .;
}
+ .pause_3insn_patch : {
+ __pause_3insn_patch = .;
+ *(.pause_3insn_patch)
+ __pause_3insn_patch_end = .;
+ }
PERCPU_SECTION(SMP_CACHE_BYTES)
. = ALIGN(PAGE_SIZE);
spill_fixup_dax:
TRAP_LOAD_THREAD_REG(%g6, %g1)
ldx [%g6 + TI_FLAGS], %g1
+ andcc %sp, 0x1, %g0
+ movne %icc, 0, %g1
andcc %g1, _TIF_32BIT, %g0
ldub [%g6 + TI_WSAVED], %g1
sll %g1, 3, %g3
/* atomic.S: These things are too big to do inline.
*
- * Copyright (C) 1999, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1999, 2007 2012 David S. Miller (davem@davemloft.net)
*/
#include <linux/linkage.h>
sub %g1, %o0, %o0
2: BACKOFF_SPIN(%o2, %o3, 1b)
ENDPROC(atomic64_sub_ret)
+
+ENTRY(atomic64_dec_if_positive) /* %o0 = atomic_ptr */
+ BACKOFF_SETUP(%o2)
+1: ldx [%o0], %g1
+ brlez,pn %g1, 3f
+ sub %g1, 1, %g7
+ casx [%o0], %g1, %g7
+ cmp %g1, %g7
+ bne,pn %xcc, BACKOFF_LABEL(2f, 1b)
+ nop
+3: retl
+ sub %g1, 1, %o0
+2: BACKOFF_SPIN(%o2, %o3, 1b)
+ENDPROC(atomic64_dec_if_positive)
EXPORT_SYMBOL(atomic64_add_ret);
EXPORT_SYMBOL(atomic64_sub);
EXPORT_SYMBOL(atomic64_sub_ret);
+EXPORT_SYMBOL(atomic64_dec_if_positive);
/* Atomic bit operations. */
EXPORT_SYMBOL(test_and_set_bit);
XR = 0;
else if (freg < 16)
XR = regs->u_regs[freg];
- else if (test_thread_flag(TIF_32BIT)) {
+ else if (!test_thread_64bit_stack(regs->u_regs[UREG_FP])) {
struct reg_window32 __user *win32;
flushw_user ();
win32 = (struct reg_window32 __user *)((unsigned long)((u32)regs->u_regs[UREG_FP]));
return _hypercall4(int, update_va_mapping, va,
new_val.pte, new_val.pte >> 32, flags);
}
+extern int __must_check xen_event_channel_op_compat(int, void *);
static inline int
HYPERVISOR_event_channel_op(int cmd, void *arg)
{
int rc = _hypercall2(int, event_channel_op, cmd, arg);
- if (unlikely(rc == -ENOSYS)) {
- struct evtchn_op op;
- op.cmd = cmd;
- memcpy(&op.u, arg, sizeof(op.u));
- rc = _hypercall1(int, event_channel_op_compat, &op);
- memcpy(arg, &op.u, sizeof(op.u));
- }
+ if (unlikely(rc == -ENOSYS))
+ rc = xen_event_channel_op_compat(cmd, arg);
return rc;
}
return _hypercall3(int, console_io, cmd, count, str);
}
+extern int __must_check HYPERVISOR_physdev_op_compat(int, void *);
+
static inline int
HYPERVISOR_physdev_op(int cmd, void *arg)
{
int rc = _hypercall2(int, physdev_op, cmd, arg);
- if (unlikely(rc == -ENOSYS)) {
- struct physdev_op op;
- op.cmd = cmd;
- memcpy(&op.u, arg, sizeof(op.u));
- rc = _hypercall1(int, physdev_op_compat, &op);
- memcpy(arg, &op.u, sizeof(op.u));
- }
+ if (unlikely(rc == -ENOSYS))
+ rc = HYPERVISOR_physdev_op_compat(cmd, arg);
return rc;
}
#ifndef _ASM_X86_XEN_HYPERVISOR_H
#define _ASM_X86_XEN_HYPERVISOR_H
-/* arch/i386/kernel/setup.c */
extern struct shared_info *HYPERVISOR_shared_info;
extern struct start_info *xen_start_info;
{
struct kvm_mmio_fragment *frag = &vcpu->mmio_fragments[0];
- memcpy(vcpu->run->mmio.data, frag->data, frag->len);
+ memcpy(vcpu->run->mmio.data, frag->data, min(8u, frag->len));
return X86EMUL_CONTINUE;
}
bytes -= handled;
val += handled;
- while (bytes) {
- unsigned now = min(bytes, 8U);
-
- frag = &vcpu->mmio_fragments[vcpu->mmio_nr_fragments++];
- frag->gpa = gpa;
- frag->data = val;
- frag->len = now;
-
- gpa += now;
- val += now;
- bytes -= now;
- }
+ WARN_ON(vcpu->mmio_nr_fragments >= KVM_MAX_MMIO_FRAGMENTS);
+ frag = &vcpu->mmio_fragments[vcpu->mmio_nr_fragments++];
+ frag->gpa = gpa;
+ frag->data = val;
+ frag->len = bytes;
return X86EMUL_CONTINUE;
}
vcpu->mmio_needed = 1;
vcpu->mmio_cur_fragment = 0;
- vcpu->run->mmio.len = vcpu->mmio_fragments[0].len;
+ vcpu->run->mmio.len = min(8u, vcpu->mmio_fragments[0].len);
vcpu->run->mmio.is_write = vcpu->mmio_is_write = ops->write;
vcpu->run->exit_reason = KVM_EXIT_MMIO;
vcpu->run->mmio.phys_addr = gpa;
*
* read:
* for each fragment
- * write gpa, len
- * exit
- * copy data
+ * for each mmio piece in the fragment
+ * write gpa, len
+ * exit
+ * copy data
* execute insn
*
* write:
* for each fragment
- * write gpa, len
- * copy data
- * exit
+ * for each mmio piece in the fragment
+ * write gpa, len
+ * copy data
+ * exit
*/
static int complete_emulated_mmio(struct kvm_vcpu *vcpu)
{
struct kvm_run *run = vcpu->run;
struct kvm_mmio_fragment *frag;
+ unsigned len;
BUG_ON(!vcpu->mmio_needed);
/* Complete previous fragment */
- frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment++];
+ frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment];
+ len = min(8u, frag->len);
if (!vcpu->mmio_is_write)
- memcpy(frag->data, run->mmio.data, frag->len);
+ memcpy(frag->data, run->mmio.data, len);
+
+ if (frag->len <= 8) {
+ /* Switch to the next fragment. */
+ frag++;
+ vcpu->mmio_cur_fragment++;
+ } else {
+ /* Go forward to the next mmio piece. */
+ frag->data += len;
+ frag->gpa += len;
+ frag->len -= len;
+ }
+
if (vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments) {
vcpu->mmio_needed = 0;
if (vcpu->mmio_is_write)
vcpu->mmio_read_completed = 1;
return complete_emulated_io(vcpu);
}
- /* Initiate next fragment */
- ++frag;
+
run->exit_reason = KVM_EXIT_MMIO;
run->mmio.phys_addr = frag->gpa;
if (vcpu->mmio_is_write)
- memcpy(run->mmio.data, frag->data, frag->len);
- run->mmio.len = frag->len;
+ memcpy(run->mmio.data, frag->data, min(8u, frag->len));
+ run->mmio.len = min(8u, frag->len);
run->mmio.is_write = vcpu->mmio_is_write;
vcpu->arch.complete_userspace_io = complete_emulated_mmio;
return 0;
return this_cpu_read(xen_vcpu_info.arch.cr2);
}
+void xen_flush_tlb_all(void)
+{
+ struct mmuext_op *op;
+ struct multicall_space mcs;
+
+ trace_xen_mmu_flush_tlb_all(0);
+
+ preempt_disable();
+
+ mcs = xen_mc_entry(sizeof(*op));
+
+ op = mcs.args;
+ op->cmd = MMUEXT_TLB_FLUSH_ALL;
+ MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+ xen_mc_issue(PARAVIRT_LAZY_MMU);
+
+ preempt_enable();
+}
static void xen_flush_tlb(void)
{
struct mmuext_op *op;
err = 0;
out:
- flush_tlb_all();
+ xen_flush_tlb_all();
return err;
}
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
select GENERIC_PCI_IOMAP
+ select GENERIC_KERNEL_THREAD
+ select GENERIC_KERNEL_EXECVE
select ARCH_WANT_OPTIONAL_GPIOLIB
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
static inline void iounmap(volatile void __iomem *addr)
{
}
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
#endif /* CONFIG_MMU */
/*
/* Clearing a0 terminates the backtrace. */
#define start_thread(regs, new_pc, new_sp) \
+ memset(regs, 0, sizeof(*regs)); \
regs->pc = new_pc; \
regs->ps = USER_PS_VALUE; \
regs->areg[1] = new_sp; \
/* Free all resources held by a thread. */
#define release_thread(thread) do { } while(0)
-/* Create a kernel thread without removing it from tasklists */
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
/* Copy and release all segment info associated with a VM */
#define copy_segments(p, mm) do { } while(0)
#define release_segments(mm) do { } while(0)
struct pt_regs;
struct sigaction;
-asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*);
+asmlinkage long sys_execve(char*, char**, char**, struct pt_regs*);
asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*);
asmlinkage long xtensa_ptrace(long, long, long, long);
asmlinkage long xtensa_sigreturn(struct pt_regs*);
-/*
- * include/asm-xtensa/unistd.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
+#ifndef _XTENSA_UNISTD_H
+#define _XTENSA_UNISTD_H
+#define __ARCH_WANT_SYS_EXECVE
#include <uapi/asm/unistd.h>
-
/*
* "Conditional" syscalls
*
#define __IGNORE_mmap /* use mmap2 */
#define __IGNORE_vfork /* use clone */
#define __IGNORE_fadvise64 /* use fadvise64_64 */
+
+#endif /* _XTENSA_UNISTD_H */
-/*
- * include/asm-xtensa/unistd.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2012 Tensilica Inc.
- */
-
-#ifndef _UAPI_XTENSA_UNISTD_H
+#if !defined(_UAPI_XTENSA_UNISTD_H) || defined(__SYSCALL)
#define _UAPI_XTENSA_UNISTD_H
#ifndef __SYSCALL
#define __NR_clone 116
__SYSCALL(116, xtensa_clone, 5)
#define __NR_execve 117
-__SYSCALL(117, xtensa_execve, 3)
+__SYSCALL(117, sys_execve, 3)
#define __NR_exit 118
__SYSCALL(118, sys_exit, 1)
#define __NR_exit_group 119
#define SYS_XTENSA_COUNT 5 /* count */
+#undef __SYSCALL
+
#endif /* _UAPI_XTENSA_UNISTD_H */
retw
-/*
- * Create a kernel thread
- *
- * int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
- * a2 a2 a3 a4
- */
-
-ENTRY(kernel_thread)
- entry a1, 16
-
- mov a5, a2 # preserve fn over syscall
- mov a7, a3 # preserve args over syscall
-
- movi a3, _CLONE_VM | _CLONE_UNTRACED
- movi a2, __NR_clone
- or a6, a4, a3 # arg0: flags
- mov a3, a1 # arg1: sp
- syscall
-
- beq a3, a1, 1f # branch if parent
- mov a6, a7 # args
- callx4 a5 # fn(args)
-
- movi a2, __NR_exit
- syscall # return value of fn(args) still in a6
-
-1: retw
-
-/*
- * Do a system call from kernel instead of calling sys_execve, so we end up
- * with proper pt_regs.
- *
- * int kernel_execve(const char *fname, char *const argv[], charg *const envp[])
- * a2 a2 a3 a4
- */
-
-ENTRY(kernel_execve)
- entry a1, 16
- mov a6, a2 # arg0 is in a6
- movi a2, __NR_execve
- syscall
-
- retw
-
/*
* Task switch.
*
j common_exception_return
+/*
+ * Kernel thread creation helper
+ * On entry, set up by copy_thread: a2 = thread_fn, a3 = thread_fn arg
+ * left from _switch_to: a6 = prev
+ */
+ENTRY(ret_from_kernel_thread)
+
+ call4 schedule_tail
+ mov a6, a3
+ callx4 a2
+ j common_exception_return
+
+ENDPROC(ret_from_kernel_thread)
#include <asm/regs.h>
extern void ret_from_fork(void);
+extern void ret_from_kernel_thread(void);
struct task_struct *current_set[NR_CPUS] = {&init_task, };
/*
* Copy thread.
*
+ * There are two modes in which this function is called:
+ * 1) Userspace thread creation,
+ * regs != NULL, usp_thread_fn is userspace stack pointer.
+ * It is expected to copy parent regs (in case CLONE_VM is not set
+ * in the clone_flags) and set up passed usp in the childregs.
+ * 2) Kernel thread creation,
+ * regs == NULL, usp_thread_fn is the function to run in the new thread
+ * and thread_fn_arg is its parameter.
+ * childregs are not used for the kernel threads.
+ *
* The stack layout for the new thread looks like this:
*
- * +------------------------+ <- sp in childregs (= tos)
+ * +------------------------+
* | childregs |
* +------------------------+ <- thread.sp = sp in dummy-frame
* | dummy-frame | (saved in dummy-frame spill-area)
* +------------------------+
*
- * We create a dummy frame to return to ret_from_fork:
- * a0 points to ret_from_fork (simulating a call4)
+ * We create a dummy frame to return to either ret_from_fork or
+ * ret_from_kernel_thread:
+ * a0 points to ret_from_fork/ret_from_kernel_thread (simulating a call4)
* sp points to itself (thread.sp)
- * a2, a3 are unused.
+ * a2, a3 are unused for userspace threads,
+ * a2 points to thread_fn, a3 holds thread_fn arg for kernel threads.
*
* Note: This is a pristine frame, so we don't need any spill region on top of
* childregs.
* involved. Much simpler to just not copy those live frames across.
*/
-int copy_thread(unsigned long clone_flags, unsigned long usp,
- unsigned long unused,
- struct task_struct * p, struct pt_regs * regs)
+int copy_thread(unsigned long clone_flags, unsigned long usp_thread_fn,
+ unsigned long thread_fn_arg,
+ struct task_struct *p, struct pt_regs *unused)
{
- struct pt_regs *childregs;
- unsigned long tos;
- int user_mode = user_mode(regs);
+ struct pt_regs *childregs = task_pt_regs(p);
#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
struct thread_info *ti;
#endif
- /* Set up new TSS. */
- tos = (unsigned long)task_stack_page(p) + THREAD_SIZE;
- if (user_mode)
- childregs = (struct pt_regs*)(tos - PT_USER_SIZE);
- else
- childregs = (struct pt_regs*)tos - 1;
-
- /* This does not copy all the regs. In a bout of brilliance or madness,
- ARs beyond a0-a15 exist past the end of the struct. */
- *childregs = *regs;
-
/* Create a call4 dummy-frame: a0 = 0, a1 = childregs. */
*((int*)childregs - 3) = (unsigned long)childregs;
*((int*)childregs - 4) = 0;
- childregs->areg[2] = 0;
- p->set_child_tid = p->clear_child_tid = NULL;
- p->thread.ra = MAKE_RA_FOR_CALL((unsigned long)ret_from_fork, 0x1);
p->thread.sp = (unsigned long)childregs;
- if (user_mode(regs)) {
+ if (!(p->flags & PF_KTHREAD)) {
+ struct pt_regs *regs = current_pt_regs();
+ unsigned long usp = usp_thread_fn ?
+ usp_thread_fn : regs->areg[1];
+ p->thread.ra = MAKE_RA_FOR_CALL(
+ (unsigned long)ret_from_fork, 0x1);
+
+ /* This does not copy all the regs.
+ * In a bout of brilliance or madness,
+ * ARs beyond a0-a15 exist past the end of the struct.
+ */
+ *childregs = *regs;
childregs->areg[1] = usp;
+ childregs->areg[2] = 0;
+
+ /* When sharing memory with the parent thread, the child
+ usually starts on a pristine stack, so we have to reset
+ windowbase, windowstart and wmask.
+ (Note that such a new thread is required to always create
+ an initial call4 frame)
+ The exception is vfork, where the new thread continues to
+ run on the parent's stack until it calls execve. This could
+ be a call8 or call12, which requires a legal stack frame
+ of the previous caller for the overflow handlers to work.
+ (Note that it's always legal to overflow live registers).
+ In this case, ensure to spill at least the stack pointer
+ of that frame. */
+
if (clone_flags & CLONE_VM) {
- childregs->wmask = 1; /* can't share live windows */
+ /* check that caller window is live and same stack */
+ int len = childregs->wmask & ~0xf;
+ if (regs->areg[1] == usp && len != 0) {
+ int callinc = (regs->areg[0] >> 30) & 3;
+ int caller_ars = XCHAL_NUM_AREGS - callinc * 4;
+ put_user(regs->areg[caller_ars+1],
+ (unsigned __user*)(usp - 12));
+ }
+ childregs->wmask = 1;
+ childregs->windowstart = 1;
+ childregs->windowbase = 0;
} else {
int len = childregs->wmask & ~0xf;
memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4],
// FIXME: we need to set THREADPTR in thread_info...
if (clone_flags & CLONE_SETTLS)
childregs->areg[2] = childregs->areg[6];
-
} else {
- /* In kernel space, we start a new thread with a new stack. */
- childregs->wmask = 1;
- childregs->areg[1] = tos;
+ p->thread.ra = MAKE_RA_FOR_CALL(
+ (unsigned long)ret_from_kernel_thread, 1);
+
+ /* pass parameters to ret_from_kernel_thread:
+ * a2 = thread_fn, a3 = thread_fn arg
+ */
+ *((int *)childregs - 1) = thread_fn_arg;
+ *((int *)childregs - 2) = usp_thread_fn;
+
+ /* Childregs are only used when we're going to userspace
+ * in which case start_thread will set them up.
+ */
}
#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
void __user *child_tid, long a5,
struct pt_regs *regs)
{
- if (!newsp)
- newsp = regs->areg[1];
return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid);
}
-
-/*
- * xtensa_execve() executes a new program.
- */
-
-asmlinkage
-long xtensa_execve(const char __user *name,
- const char __user *const __user *argv,
- const char __user *const __user *envp,
- long a3, long a4, long a5,
- struct pt_regs *regs)
-{
- long error;
- struct filename *filename;
-
- filename = getname(name);
- error = PTR_ERR(filename);
- if (IS_ERR(filename))
- goto out;
- error = do_execve(filename->name, argv, envp, regs);
- putname(filename);
-out:
- return error;
-}
-
syscall_t sys_call_table[__NR_syscall_count] /* FIXME __cacheline_aligned */= {
[0 ... __NR_syscall_count - 1] = (syscall_t)&sys_ni_syscall,
-#undef __SYSCALL
#define __SYSCALL(nr,symbol,nargs) [ nr ] = (syscall_t)symbol,
-#undef __KERNEL_SYSCALLS__
-#include <asm/unistd.h>
+#include <uapi/asm/unistd.h>
};
asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg)
return (long)ret;
}
-asmlinkage long xtensa_fadvise64_64(int fd, int advice, unsigned long long offset, unsigned long long len)
+asmlinkage long xtensa_fadvise64_64(int fd, int advice,
+ unsigned long long offset, unsigned long long len)
{
return sys_fadvise64_64(fd, offset, len, advice);
}
EXPORT_SYMBOL(clear_page);
EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(kernel_thread);
EXPORT_SYMBOL(empty_zero_page);
/*
config BLK_DEV_THROTTLING
bool "Block layer bio throttling support"
- depends on BLK_CGROUP=y && EXPERIMENTAL
+ depends on BLK_CGROUP=y
default n
---help---
Block layer bio throttling support. It can be used to limit
blkg_destroy(blkg);
spin_unlock(&blkcg->lock);
}
+
+ /*
+ * root blkg is destroyed. Just clear the pointer since
+ * root_rl does not take reference on root blkg.
+ */
+ q->root_blkg = NULL;
+ q->root_rl.blkg = NULL;
}
static void blkg_rcu_free(struct rcu_head *rcu_head)
*/
if (rl == &q->root_rl) {
ent = &q->blkg_list;
+ /* There are no more block groups, hence no request lists */
+ if (list_empty(ent))
+ return NULL;
} else {
blkg = container_of(rl, struct blkcg_gq, rl);
ent = &blkg->q_node;
struct request *rqa = container_of(a, struct request, queuelist);
struct request *rqb = container_of(b, struct request, queuelist);
- return !(rqa->q <= rqb->q);
+ return !(rqa->q < rqb->q ||
+ (rqa->q == rqb->q && blk_rq_pos(rqa) < blk_rq_pos(rqb)));
}
/*
struct crypto_async_request *req, *backlog;
cpu_queue = container_of(work, struct cryptd_cpu_queue, work);
- /* Only handle one request at a time to avoid hogging crypto
- * workqueue. preempt_disable/enable is used to prevent
- * being preempted by cryptd_enqueue_request() */
+ /*
+ * Only handle one request at a time to avoid hogging crypto workqueue.
+ * preempt_disable/enable is used to prevent being preempted by
+ * cryptd_enqueue_request(). local_bh_disable/enable is used to prevent
+ * cryptd_enqueue_request() being accessed from software interrupts.
+ */
+ local_bh_disable();
preempt_disable();
backlog = crypto_get_backlog(&cpu_queue->queue);
req = crypto_dequeue_request(&cpu_queue->queue);
preempt_enable();
+ local_bh_enable();
if (!req)
return;
acpi_video_bus_get_devices(struct acpi_video_bus *video,
struct acpi_device *device)
{
- int status;
+ int status = 0;
struct acpi_device *dev;
- status = acpi_video_device_enumerate(video);
- if (status)
- return status;
+ /*
+ * There are systems where video module known to work fine regardless
+ * of broken _DOD and ignoring returned value here doesn't cause
+ * any issues later.
+ */
+ acpi_video_device_enumerate(video);
list_for_each_entry(dev, &device->children, node) {
*/
int platform_get_irq(struct platform_device *dev, unsigned int num)
{
+#ifdef CONFIG_SPARC
+ /* sparc does not have irqs represented as IORESOURCE_IRQ resources */
+ if (!dev || num >= dev->archdata.num_irqs)
+ return -ENXIO;
+ return dev->archdata.irqs[num];
+#else
struct resource *r = platform_get_resource(dev, IORESOURCE_IRQ, num);
return r ? r->start : -ENXIO;
+#endif
}
EXPORT_SYMBOL_GPL(platform_get_irq);
config BLK_CPQ_CISS_DA
tristate "Compaq Smart Array 5xxx support"
depends on PCI
+ select CHECK_SIGNATURE
help
This is the driver for Compaq Smart Array 5xxx controllers.
Everyone using these boards should say Y here.
module will be called DAC960.
config BLK_DEV_UMEM
- tristate "Micro Memory MM5415 Battery Backed RAM support (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
+ tristate "Micro Memory MM5415 Battery Backed RAM support"
+ depends on PCI
---help---
Saying Y here will include support for the MM5415 family of
battery backed (Non-volatile) RAM cards.
a disc is opened for writing.
config CDROM_PKTCDVD_WCACHE
- bool "Enable write caching (EXPERIMENTAL)"
- depends on CDROM_PKTCDVD && EXPERIMENTAL
+ bool "Enable write caching"
+ depends on CDROM_PKTCDVD
help
If enabled, write caching will be set for the CD-R/W device. For now
this option is dangerous unless the CD-RW media is known good, as we
config VIRTIO_BLK
- tristate "Virtio block driver (EXPERIMENTAL)"
- depends on EXPERIMENTAL && VIRTIO
+ tristate "Virtio block driver"
+ depends on VIRTIO
---help---
This is the virtual block driver for virtio. It can be used with
lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
config BLK_DEV_RBD
tristate "Rados block device (RBD)"
- depends on INET && EXPERIMENTAL && BLOCK
+ depends on INET && BLOCK
select CEPH_LIB
select LIBCRC32C
select CRYPTO_AES
return;
}
/* write all data in the battery backed cache to disk */
- memset(flush_buf, 0, 4);
return_code = sendcmd_withirq(h, CCISS_CACHE_FLUSH, flush_buf,
4, 0, CTLR_LUNID, TYPE_CMD);
kfree(flush_buf);
static struct platform_device floppy_device[N_DRIVE];
+static bool floppy_available(int drive)
+{
+ if (!(allowed_drive_mask & (1 << drive)))
+ return false;
+ if (fdc_state[FDC(drive)].version == FDC_NONE)
+ return false;
+ return true;
+}
+
static struct kobject *floppy_find(dev_t dev, int *part, void *data)
{
int drive = (*part & 3) | ((*part & 0x80) >> 5);
- if (drive >= N_DRIVE ||
- !(allowed_drive_mask & (1 << drive)) ||
- fdc_state[FDC(drive)].version == FDC_NONE)
+ if (drive >= N_DRIVE || !floppy_available(drive))
return NULL;
if (((*part >> 2) & 0x1f) >= ARRAY_SIZE(floppy_type))
return NULL;
static int __init do_floppy_init(void)
{
- int i, unit, drive;
- int err, dr;
+ int i, unit, drive, err;
set_debugt();
interruptjiffies = resultjiffies = jiffies;
raw_cmd = NULL;
- for (dr = 0; dr < N_DRIVE; dr++) {
- disks[dr] = alloc_disk(1);
- if (!disks[dr]) {
- err = -ENOMEM;
- goto out_put_disk;
- }
+ floppy_wq = alloc_ordered_workqueue("floppy", 0);
+ if (!floppy_wq)
+ return -ENOMEM;
- floppy_wq = alloc_ordered_workqueue("floppy", 0);
- if (!floppy_wq) {
+ for (drive = 0; drive < N_DRIVE; drive++) {
+ disks[drive] = alloc_disk(1);
+ if (!disks[drive]) {
err = -ENOMEM;
goto out_put_disk;
}
- disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock);
- if (!disks[dr]->queue) {
+ disks[drive]->queue = blk_init_queue(do_fd_request, &floppy_lock);
+ if (!disks[drive]->queue) {
err = -ENOMEM;
- goto out_destroy_workq;
+ goto out_put_disk;
}
- blk_queue_max_hw_sectors(disks[dr]->queue, 64);
- disks[dr]->major = FLOPPY_MAJOR;
- disks[dr]->first_minor = TOMINOR(dr);
- disks[dr]->fops = &floppy_fops;
- sprintf(disks[dr]->disk_name, "fd%d", dr);
+ blk_queue_max_hw_sectors(disks[drive]->queue, 64);
+ disks[drive]->major = FLOPPY_MAJOR;
+ disks[drive]->first_minor = TOMINOR(drive);
+ disks[drive]->fops = &floppy_fops;
+ sprintf(disks[drive]->disk_name, "fd%d", drive);
- init_timer(&motor_off_timer[dr]);
- motor_off_timer[dr].data = dr;
- motor_off_timer[dr].function = motor_off_callback;
+ init_timer(&motor_off_timer[drive]);
+ motor_off_timer[drive].data = drive;
+ motor_off_timer[drive].function = motor_off_callback;
}
err = register_blkdev(FLOPPY_MAJOR, "fd");
}
for (drive = 0; drive < N_DRIVE; drive++) {
- if (!(allowed_drive_mask & (1 << drive)))
- continue;
- if (fdc_state[FDC(drive)].version == FDC_NONE)
+ if (!floppy_available(drive))
continue;
floppy_device[drive].name = floppy_device_name;
err = platform_device_register(&floppy_device[drive]);
if (err)
- goto out_release_dma;
+ goto out_remove_drives;
err = device_create_file(&floppy_device[drive].dev,
&dev_attr_cmos);
out_unreg_platform_dev:
platform_device_unregister(&floppy_device[drive]);
+out_remove_drives:
+ while (drive--) {
+ if (floppy_available(drive)) {
+ del_gendisk(disks[drive]);
+ device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
+ platform_device_unregister(&floppy_device[drive]);
+ }
+ }
out_release_dma:
if (atomic_read(&usage_count))
floppy_release_irq_and_dma();
out_unreg_region:
blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
platform_driver_unregister(&floppy_driver);
-out_destroy_workq:
- destroy_workqueue(floppy_wq);
out_unreg_blkdev:
unregister_blkdev(FLOPPY_MAJOR, "fd");
out_put_disk:
- while (dr--) {
- del_timer_sync(&motor_off_timer[dr]);
- if (disks[dr]->queue) {
- blk_cleanup_queue(disks[dr]->queue);
- /*
- * put_disk() is not paired with add_disk() and
- * will put queue reference one extra time. fix it.
- */
- disks[dr]->queue = NULL;
+ for (drive = 0; drive < N_DRIVE; drive++) {
+ if (!disks[drive])
+ break;
+ if (disks[drive]->queue) {
+ del_timer_sync(&motor_off_timer[drive]);
+ blk_cleanup_queue(disks[drive]->queue);
+ disks[drive]->queue = NULL;
}
- put_disk(disks[dr]);
+ put_disk(disks[drive]);
}
+ destroy_workqueue(floppy_wq);
return err;
}
for (drive = 0; drive < N_DRIVE; drive++) {
del_timer_sync(&motor_off_timer[drive]);
- if ((allowed_drive_mask & (1 << drive)) &&
- fdc_state[FDC(drive)].version != FDC_NONE) {
+ if (floppy_available(drive)) {
del_gendisk(disks[drive]);
device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
platform_device_unregister(&floppy_device[drive]);
if (lo->lo_state != Lo_bound)
return -ENXIO;
- if (lo->lo_refcnt > 1) /* we needed one fd for the ioctl */
- return -EBUSY;
+ /*
+ * If we've explicitly asked to tear down the loop device,
+ * and it has an elevated reference count, set it for auto-teardown when
+ * the last reference goes away. This stops $!~#$@ udev from
+ * preventing teardown because it decided that it needs to run blkid on
+ * the loopback device whenever they appear. xfstests is notorious for
+ * failing tests because blkid via udev races with a losetup
+ * <dev>/do something like mkfs/losetup -d <dev> causing the losetup -d
+ * command to fail with EBUSY.
+ */
+ if (lo->lo_refcnt > 1) {
+ lo->lo_flags |= LO_FLAGS_AUTOCLEAR;
+ mutex_unlock(&lo->lo_ctl_mutex);
+ return 0;
+ }
if (filp == NULL)
return -EINVAL;
}
return rv;
}
-
-static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout)
+static void mtip_set_timeout(struct driver_data *dd,
+ struct host_to_dev_fis *fis,
+ unsigned int *timeout, u8 erasemode)
{
switch (fis->command) {
case ATA_CMD_DOWNLOAD_MICRO:
break;
case ATA_CMD_SEC_ERASE_UNIT:
case 0xFC:
- *timeout = 240000; /* 4 minutes */
+ if (erasemode)
+ *timeout = ((*(dd->port->identify + 90) * 2) * 60000);
+ else
+ *timeout = ((*(dd->port->identify + 89) * 2) * 60000);
break;
case ATA_CMD_STANDBYNOW1:
*timeout = 120000; /* 2 minutes */
unsigned int transfer_size;
unsigned long task_file_data;
int intotal = outtotal + req_task->out_size;
+ int erasemode = 0;
taskout = req_task->out_size;
taskin = req_task->in_size;
fis.lba_hi,
fis.device);
- mtip_set_timeout(&fis, &timeout);
+ /* check for erase mode support during secure erase.*/
+ if ((fis.command == ATA_CMD_SEC_ERASE_UNIT)
+ && (outbuf[0] & MTIP_SEC_ERASE_MODE)) {
+ erasemode = 1;
+ }
+
+ mtip_set_timeout(dd, &fis, &timeout, erasemode);
/* Determine the correct transfer size.*/
if (force_single_sector)
/* offset of Device Control register in PCIe extended capabilites space */
#define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48
+/* check for erase mode support during secure erase */
+#define MTIP_SEC_ERASE_MODE 0x3
+
/* # of times to retry timed out/failed IOs */
#define MTIP_MAX_RETRIES 2
struct block_device *bdev;
/* Cached size parameter. */
sector_t size;
- bool flush_support;
- bool discard_secure;
+ unsigned int flush_support:1;
+ unsigned int discard_secure:1;
};
struct backend_info;
{
struct xen_blkif *blkif;
- blkif = kmem_cache_alloc(xen_blkif_cachep, GFP_KERNEL);
+ blkif = kmem_cache_zalloc(xen_blkif_cachep, GFP_KERNEL);
if (!blkif)
return ERR_PTR(-ENOMEM);
- memset(blkif, 0, sizeof(*blkif));
blkif->domid = domid;
spin_lock_init(&blkif->blk_ring_lock);
atomic_set(&blkif->refcnt, 1);
}
}
-void xen_blkif_free(struct xen_blkif *blkif)
+static void xen_blkif_free(struct xen_blkif *blkif)
{
if (!atomic_dec_and_test(&blkif->refcnt))
BUG();
VBD_SHOW(physical_device, "%x:%x\n", be->major, be->minor);
VBD_SHOW(mode, "%s\n", be->mode);
-int xenvbd_sysfs_addif(struct xenbus_device *dev)
+static int xenvbd_sysfs_addif(struct xenbus_device *dev)
{
int error;
return error;
}
-void xenvbd_sysfs_delif(struct xenbus_device *dev)
+static void xenvbd_sysfs_delif(struct xenbus_device *dev)
{
sysfs_remove_group(&dev->dev.kobj, &xen_vbdstat_group);
device_remove_file(&dev->dev, &dev_attr_mode);
*/
static int hci_uart_tty_open(struct tty_struct *tty)
{
- struct hci_uart *hu = (void *) tty->disc_data;
+ struct hci_uart *hu;
BT_DBG("tty %p", tty);
- /* FIXME: This btw is bogus, nothing requires the old ldisc to clear
- the pointer */
- if (hu)
- return -EEXIST;
-
/* Error if the tty has no write op instead of leaving an exploitable
hole */
if (tty->ops->write == NULL)
#include <asm/io.h>
-#include <plat/cpu.h>
-
#define RNG_OUT_REG 0x00 /* Output register */
#define RNG_STAT_REG 0x04 /* Status register
[0] = STAT_BUSY */
* http://www.gnu.org/licenses/gpl.html
*
* Maintainer:
- * Andreas Herrmann <andreas.herrmann3@amd.com>
+ * Andreas Herrmann <herrmann.der.user@googlemail.com>
*
* Based on the powernow-k7.c module written by Dave Jones.
* (C) 2003 Dave Jones on behalf of SuSE Labs
#include <crypto/scatterwalk.h>
#include <crypto/aes.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
/* OMAP TRM gives bitfields as start:end, where start is the higher bit
number. For example 7:0 */
{
pr_info("loading %s driver\n", "omap-aes");
- if (!cpu_class_is_omap2() || omap_type() != OMAP2_DEVICE_TYPE_SEC) {
- pr_err("Unsupported cpu\n");
- return -ENODEV;
- }
-
return platform_driver_register(&omap_aes_driver);
}
#include <crypto/hash.h>
#include <crypto/internal/hash.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/irqs.h>
#define SHA_REG_DIGEST(x) (0x00 + ((x) * 0x04))
{
pr_info("loading %s driver\n", "omap-sham");
- if (!cpu_class_is_omap2() ||
- (omap_type() != OMAP2_DEVICE_TYPE_SEC &&
- omap_type() != OMAP2_DEVICE_TYPE_EMU)) {
- pr_err("Unsupported cpu\n");
- return -ENODEV;
- }
-
return platform_driver_register(&omap_sham_driver);
}
#include <asm/irq.h>
#include <linux/platform_data/dma-imx.h>
-#include <mach/hardware.h>
#include "dmaengine.h"
#define IMXDMA_MAX_CHAN_DESCRIPTORS 16
int slot_2d;
};
+enum imx_dma_type {
+ IMX1_DMA,
+ IMX21_DMA,
+ IMX27_DMA,
+};
+
struct imxdma_engine {
struct device *dev;
struct device_dma_parameters dma_parms;
spinlock_t lock;
struct imx_dma_2d_config slots_2d[IMX_DMA_2D_SLOTS];
struct imxdma_channel channel[IMX_DMA_CHANNELS];
+ enum imx_dma_type devtype;
+};
+
+static struct platform_device_id imx_dma_devtype[] = {
+ {
+ .name = "imx1-dma",
+ .driver_data = IMX1_DMA,
+ }, {
+ .name = "imx21-dma",
+ .driver_data = IMX21_DMA,
+ }, {
+ .name = "imx27-dma",
+ .driver_data = IMX27_DMA,
+ }, {
+ /* sentinel */
+ }
};
+MODULE_DEVICE_TABLE(platform, imx_dma_devtype);
+
+static inline int is_imx1_dma(struct imxdma_engine *imxdma)
+{
+ return imxdma->devtype == IMX1_DMA;
+}
+
+static inline int is_imx21_dma(struct imxdma_engine *imxdma)
+{
+ return imxdma->devtype == IMX21_DMA;
+}
+
+static inline int is_imx27_dma(struct imxdma_engine *imxdma)
+{
+ return imxdma->devtype == IMX27_DMA;
+}
static struct imxdma_channel *to_imxdma_chan(struct dma_chan *chan)
{
static int imxdma_hw_chain(struct imxdma_channel *imxdmac)
{
- if (cpu_is_mx27())
+ struct imxdma_engine *imxdma = imxdmac->imxdma;
+
+ if (is_imx27_dma(imxdma))
return imxdmac->hw_chaining;
else
return 0;
imx_dmav1_writel(imxdma, imx_dmav1_readl(imxdma, DMA_CCR(channel)) |
CCR_CEN | CCR_ACRPT, DMA_CCR(channel));
- if ((cpu_is_mx21() || cpu_is_mx27()) &&
+ if (!is_imx1_dma(imxdma) &&
d->sg && imxdma_hw_chain(imxdmac)) {
d->sg = sg_next(d->sg);
if (d->sg) {
struct imxdma_engine *imxdma = dev_id;
int i, disr;
- if (cpu_is_mx21() || cpu_is_mx27())
+ if (!is_imx1_dma(imxdma))
imxdma_err_handler(irq, dev_id);
disr = imx_dmav1_readl(imxdma, DMA_DISR);
static int __init imxdma_probe(struct platform_device *pdev)
{
struct imxdma_engine *imxdma;
+ struct resource *res;
int ret, i;
+ int irq, irq_err;
-
- imxdma = kzalloc(sizeof(*imxdma), GFP_KERNEL);
+ imxdma = devm_kzalloc(&pdev->dev, sizeof(*imxdma), GFP_KERNEL);
if (!imxdma)
return -ENOMEM;
- if (cpu_is_mx1()) {
- imxdma->base = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
- } else if (cpu_is_mx21()) {
- imxdma->base = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
- } else if (cpu_is_mx27()) {
- imxdma->base = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
- } else {
- kfree(imxdma);
- return 0;
- }
+ imxdma->devtype = pdev->id_entry->driver_data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ imxdma->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!imxdma->base)
+ return -EADDRNOTAVAIL;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
imxdma->dma_ipg = devm_clk_get(&pdev->dev, "ipg");
- if (IS_ERR(imxdma->dma_ipg)) {
- ret = PTR_ERR(imxdma->dma_ipg);
- goto err_clk;
- }
+ if (IS_ERR(imxdma->dma_ipg))
+ return PTR_ERR(imxdma->dma_ipg);
imxdma->dma_ahb = devm_clk_get(&pdev->dev, "ahb");
- if (IS_ERR(imxdma->dma_ahb)) {
- ret = PTR_ERR(imxdma->dma_ahb);
- goto err_clk;
- }
+ if (IS_ERR(imxdma->dma_ahb))
+ return PTR_ERR(imxdma->dma_ahb);
clk_prepare_enable(imxdma->dma_ipg);
clk_prepare_enable(imxdma->dma_ahb);
/* reset DMA module */
imx_dmav1_writel(imxdma, DCR_DRST, DMA_DCR);
- if (cpu_is_mx1()) {
- ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", imxdma);
+ if (is_imx1_dma(imxdma)) {
+ ret = devm_request_irq(&pdev->dev, irq,
+ dma_irq_handler, 0, "DMA", imxdma);
if (ret) {
dev_warn(imxdma->dev, "Can't register IRQ for DMA\n");
- goto err_enable;
+ goto err;
+ }
+
+ irq_err = platform_get_irq(pdev, 1);
+ if (irq_err < 0) {
+ ret = irq_err;
+ goto err;
}
- ret = request_irq(MX1_DMA_ERR, imxdma_err_handler, 0, "DMA", imxdma);
+ ret = devm_request_irq(&pdev->dev, irq_err,
+ imxdma_err_handler, 0, "DMA", imxdma);
if (ret) {
dev_warn(imxdma->dev, "Can't register ERRIRQ for DMA\n");
- free_irq(MX1_DMA_INT, NULL);
- goto err_enable;
+ goto err;
}
}
for (i = 0; i < IMX_DMA_CHANNELS; i++) {
struct imxdma_channel *imxdmac = &imxdma->channel[i];
- if (cpu_is_mx21() || cpu_is_mx27()) {
- ret = request_irq(MX2x_INT_DMACH0 + i,
+ if (!is_imx1_dma(imxdma)) {
+ ret = devm_request_irq(&pdev->dev, irq + i,
dma_irq_handler, 0, "DMA", imxdma);
if (ret) {
dev_warn(imxdma->dev, "Can't register IRQ %d "
"for DMA channel %d\n",
- MX2x_INT_DMACH0 + i, i);
- goto err_init;
+ irq + i, i);
+ goto err;
}
init_timer(&imxdmac->watchdog);
imxdmac->watchdog.function = &imxdma_watchdog;
ret = dma_async_device_register(&imxdma->dma_device);
if (ret) {
dev_err(&pdev->dev, "unable to register\n");
- goto err_init;
+ goto err;
}
return 0;
-err_init:
-
- if (cpu_is_mx21() || cpu_is_mx27()) {
- while (--i >= 0)
- free_irq(MX2x_INT_DMACH0 + i, NULL);
- } else if cpu_is_mx1() {
- free_irq(MX1_DMA_INT, NULL);
- free_irq(MX1_DMA_ERR, NULL);
- }
-err_enable:
+err:
clk_disable_unprepare(imxdma->dma_ipg);
clk_disable_unprepare(imxdma->dma_ahb);
-err_clk:
- kfree(imxdma);
return ret;
}
static int __exit imxdma_remove(struct platform_device *pdev)
{
struct imxdma_engine *imxdma = platform_get_drvdata(pdev);
- int i;
dma_async_device_unregister(&imxdma->dma_device);
- if (cpu_is_mx21() || cpu_is_mx27()) {
- for (i = 0; i < IMX_DMA_CHANNELS; i++)
- free_irq(MX2x_INT_DMACH0 + i, NULL);
- } else if cpu_is_mx1() {
- free_irq(MX1_DMA_INT, NULL);
- free_irq(MX1_DMA_ERR, NULL);
- }
-
clk_disable_unprepare(imxdma->dma_ipg);
clk_disable_unprepare(imxdma->dma_ahb);
- kfree(imxdma);
return 0;
}
.driver = {
.name = "imx-dma",
},
+ .id_table = imx_dma_devtype,
.remove = __exit_p(imxdma_remove),
};
#include <asm/irq.h>
#include <linux/platform_data/dma-imx-sdma.h>
#include <linux/platform_data/dma-imx.h>
-#include <mach/hardware.h>
#include "dmaengine.h"
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
-
-#include <mach/ipu.h>
+#include <linux/dma/ipu-dma.h>
#include "../dmaengine.h"
#include "ipu_intern.h"
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/module.h>
-
-#include <mach/ipu.h>
+#include <linux/dma/ipu-dma.h>
#include "ipu_intern.h"
#include "virt-dma.h"
-#include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
struct omap_dmadev {
struct dma_device ddev;
omap_disable_dma_irq(c->dma_ch, OMAP_DMA_BLOCK_IRQ);
}
- if (!cpu_class_is_omap1()) {
+ if (dma_omap2plus()) {
omap_set_dma_src_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16);
omap_set_dma_dest_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16);
}
config OF_GPIO
def_bool y
- depends on OF && !SPARC
+ depends on OF
config DEBUG_GPIO
bool "Debug GPIO calls"
}
chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
- chip->buffer = devm_kzalloc(&spi->dev, chip->gpio_chip.ngpio, GFP_KERNEL);
+ chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL);
if (!chip->buffer) {
ret = -ENOMEM;
goto exit_destroy;
if (ret)
return ret;
+ mvebu_gpio_set(chip, pin, value);
+
spin_lock_irqsave(&mvchip->lock, flags);
u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip));
u &= ~(1 << pin);
ct->handler = handle_edge_irq;
ct->chip.name = mvchip->chip.label;
- irq_setup_generic_chip(gc, IRQ_MSK(ngpios), IRQ_GC_INIT_MASK_CACHE,
+ irq_setup_generic_chip(gc, IRQ_MSK(ngpios), 0,
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
/* Setup irq domain on top of the generic chip. */
}
}
+/**
+ * _clear_gpio_debounce - clear debounce settings for a gpio
+ * @bank: the gpio bank we're acting upon
+ * @gpio: the gpio number on this @gpio
+ *
+ * If a gpio is using debounce, then clear the debounce enable bit and if
+ * this is the only gpio in this bank using debounce, then clear the debounce
+ * time too. The debounce clock will also be disabled when calling this function
+ * if this is the only gpio in the bank using debounce.
+ */
+static void _clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio)
+{
+ u32 gpio_bit = GPIO_BIT(bank, gpio);
+
+ if (!bank->dbck_flag)
+ return;
+
+ if (!(bank->dbck_enable_mask & gpio_bit))
+ return;
+
+ bank->dbck_enable_mask &= ~gpio_bit;
+ bank->context.debounce_en &= ~gpio_bit;
+ __raw_writel(bank->context.debounce_en,
+ bank->base + bank->regs->debounce_en);
+
+ if (!bank->dbck_enable_mask) {
+ bank->context.debounce = 0;
+ __raw_writel(bank->context.debounce, bank->base +
+ bank->regs->debounce);
+ clk_disable(bank->dbck);
+ bank->dbck_enabled = false;
+ }
+}
+
static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio,
unsigned trigger)
{
_set_gpio_irqenable(bank, gpio, 0);
_clear_gpio_irqstatus(bank, gpio);
_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
+ _clear_gpio_debounce(bank, gpio);
}
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
unsigned long flags;
spin_lock_irqsave(&tgpio->lock, flags);
- tgpio->last_ier &= ~(1 << offset);
+ tgpio->last_ier &= ~(1UL << offset);
iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER);
spin_unlock_irqrestore(&tgpio->lock, flags);
}
unsigned long flags;
spin_lock_irqsave(&tgpio->lock, flags);
- tgpio->last_ier |= 1 << offset;
+ tgpio->last_ier |= 1UL << offset;
iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER);
spin_unlock_irqrestore(&tgpio->lock, flags);
}
*/
status = gpio_request(gpio, "sysfs");
- if (status < 0)
+ if (status < 0) {
+ if (status == -EPROBE_DEFER)
+ status = -ENODEV;
goto done;
-
+ }
status = gpio_export(gpio, true);
if (status < 0)
gpio_free(gpio);
spin_lock_irqsave(&gpio_lock, flags);
- if (!gpio_is_valid(gpio))
+ if (!gpio_is_valid(gpio)) {
+ status = -EINVAL;
goto done;
+ }
desc = &gpio_desc[gpio];
chip = desc->chip;
if (chip == NULL)
int minor_id = iminor(inode);
struct drm_minor *minor;
int retcode = 0;
+ int need_setup = 0;
+ struct address_space *old_mapping;
minor = idr_find(&drm_minors_idr, minor_id);
if (!minor)
if (drm_device_is_unplugged(dev))
return -ENODEV;
+ if (!dev->open_count++)
+ need_setup = 1;
+ mutex_lock(&dev->struct_mutex);
+ old_mapping = dev->dev_mapping;
+ if (old_mapping == NULL)
+ dev->dev_mapping = &inode->i_data;
+ /* ihold ensures nobody can remove inode with our i_data */
+ ihold(container_of(dev->dev_mapping, struct inode, i_data));
+ inode->i_mapping = dev->dev_mapping;
+ filp->f_mapping = dev->dev_mapping;
+ mutex_unlock(&dev->struct_mutex);
+
retcode = drm_open_helper(inode, filp, dev);
- if (!retcode) {
- atomic_inc(&dev->counts[_DRM_STAT_OPENS]);
- if (!dev->open_count++)
- retcode = drm_setup(dev);
- }
- if (!retcode) {
- mutex_lock(&dev->struct_mutex);
- if (dev->dev_mapping == NULL)
- dev->dev_mapping = &inode->i_data;
- /* ihold ensures nobody can remove inode with our i_data */
- ihold(container_of(dev->dev_mapping, struct inode, i_data));
- inode->i_mapping = dev->dev_mapping;
- filp->f_mapping = dev->dev_mapping;
- mutex_unlock(&dev->struct_mutex);
+ if (retcode)
+ goto err_undo;
+ atomic_inc(&dev->counts[_DRM_STAT_OPENS]);
+ if (need_setup) {
+ retcode = drm_setup(dev);
+ if (retcode)
+ goto err_undo;
}
+ return 0;
+err_undo:
+ mutex_lock(&dev->struct_mutex);
+ filp->f_mapping = old_mapping;
+ inode->i_mapping = old_mapping;
+ iput(container_of(dev->dev_mapping, struct inode, i_data));
+ dev->dev_mapping = old_mapping;
+ mutex_unlock(&dev->struct_mutex);
+ dev->open_count--;
return retcode;
}
EXPORT_SYMBOL(drm_open);
config DRM_EXYNOS
tristate "DRM Support for Samsung SoC EXYNOS Series"
- depends on DRM && PLAT_SAMSUNG
+ depends on DRM && (PLAT_SAMSUNG || ARCH_MULTIPLATFORM)
select DRM_KMS_HELPER
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
exynos_connector->encoder_id = encoder->base.id;
exynos_connector->manager = manager;
exynos_connector->dpms = DRM_MODE_DPMS_OFF;
+ connector->dpms = DRM_MODE_DPMS_OFF;
connector->encoder = encoder;
err = drm_mode_connector_attach_encoder(connector, encoder);
* @manager: specific encoder has its own manager to control a hardware
* appropriately and we can access a hardware drawing on this manager.
* @dpms: store the encoder dpms value.
+ * @updated: indicate whether overlay data updating is needed or not.
*/
struct exynos_drm_encoder {
struct drm_crtc *old_crtc;
struct drm_encoder drm_encoder;
struct exynos_drm_manager *manager;
- int dpms;
+ int dpms;
+ bool updated;
};
static void exynos_drm_connector_power(struct drm_encoder *encoder, int mode)
switch (mode) {
case DRM_MODE_DPMS_ON:
if (manager_ops && manager_ops->apply)
- manager_ops->apply(manager->dev);
+ if (!exynos_encoder->updated)
+ manager_ops->apply(manager->dev);
+
exynos_drm_connector_power(encoder, mode);
exynos_encoder->dpms = mode;
break;
case DRM_MODE_DPMS_OFF:
exynos_drm_connector_power(encoder, mode);
exynos_encoder->dpms = mode;
+ exynos_encoder->updated = false;
break;
default:
DRM_ERROR("unspecified mode %d\n", mode);
static void exynos_drm_encoder_commit(struct drm_encoder *encoder)
{
- struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder);
+ struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder);
+ struct exynos_drm_manager *manager = exynos_encoder->manager;
struct exynos_drm_manager_ops *manager_ops = manager->ops;
DRM_DEBUG_KMS("%s\n", __FILE__);
if (manager_ops && manager_ops->commit)
manager_ops->commit(manager->dev);
+
+ /*
+ * this will avoid one issue that overlay data is updated to
+ * real hardware two times.
+ * And this variable will be used to check if the data was
+ * already updated or not by exynos_drm_encoder_dpms function.
+ */
+ exynos_encoder->updated = true;
}
static void exynos_drm_encoder_disable(struct drm_encoder *encoder)
if (manager_ops && manager_ops->dpms)
manager_ops->dpms(manager->dev, mode);
- /*
- * set current mode to new one so that data aren't updated into
- * registers by drm_helper_connector_dpms two times.
- *
- * in case that drm_crtc_helper_set_mode() is called,
- * overlay_ops->commit() and manager_ops->commit() callbacks
- * can be called two times, first at drm_crtc_helper_set_mode()
- * and second at drm_helper_connector_dpms().
- * so with this setting, when drm_helper_connector_dpms() is called
- * encoder->funcs->dpms() will be ignored.
- */
- exynos_encoder->dpms = mode;
-
/*
* if this condition is ok then it means that the crtc is already
* detached from encoder and last function for detaching is properly
const struct of_device_id *match;
match = of_match_node(of_match_ptr(mixer_match_types),
pdev->dev.of_node);
- drv = match->data;
+ drv = (struct mixer_drv_data *)match->data;
} else {
drv = (struct mixer_drv_data *)
platform_get_device_id(pdev)->driver_data;
goto put_gmch;
}
- i915_kick_out_firmware_fb(dev_priv);
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
+ i915_kick_out_firmware_fb(dev_priv);
pci_set_master(dev->pdev);
crt->base.type = INTEL_OUTPUT_ANALOG;
crt->base.cloneable = true;
- if (IS_HASWELL(dev))
+ if (IS_HASWELL(dev) || IS_I830(dev))
crt->base.crtc_mask = (1 << 0);
else
crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
intel_ring_emit(ring, flip_addr);
intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
/* turn overlay off */
- intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF);
- intel_ring_emit(ring, flip_addr);
- intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+ if (IS_I830(dev)) {
+ /* Workaround: Don't disable the overlay fully, since otherwise
+ * it dies on the next OVERLAY_ON cmd. */
+ intel_ring_emit(ring, MI_NOOP);
+ intel_ring_emit(ring, MI_NOOP);
+ intel_ring_emit(ring, MI_NOOP);
+ } else {
+ intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF);
+ intel_ring_emit(ring, flip_addr);
+ intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+ }
intel_ring_advance(ring);
return intel_overlay_do_wait_request(overlay, intel_overlay_off_tail);
props.type = BACKLIGHT_RAW;
props.max_brightness = _intel_panel_get_max_backlight(dev);
if (props.max_brightness == 0) {
- DRM_ERROR("Failed to get maximum backlight value\n");
+ DRM_DEBUG_DRIVER("Failed to get maximum backlight value\n");
return -ENODEV;
}
dev_priv->backlight =
}
#endif
+static bool intel_sdvo_write_infoframe(struct intel_sdvo *intel_sdvo,
+ unsigned if_index, uint8_t tx_rate,
+ uint8_t *data, unsigned length)
+{
+ uint8_t set_buf_index[2] = { if_index, 0 };
+ uint8_t hbuf_size, tmp[8];
+ int i;
+
+ if (!intel_sdvo_set_value(intel_sdvo,
+ SDVO_CMD_SET_HBUF_INDEX,
+ set_buf_index, 2))
+ return false;
+
+ if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HBUF_INFO,
+ &hbuf_size, 1))
+ return false;
+
+ /* Buffer size is 0 based, hooray! */
+ hbuf_size++;
+
+ DRM_DEBUG_KMS("writing sdvo hbuf: %i, hbuf_size %i, hbuf_size: %i\n",
+ if_index, length, hbuf_size);
+
+ for (i = 0; i < hbuf_size; i += 8) {
+ memset(tmp, 0, 8);
+ if (i < length)
+ memcpy(tmp, data + i, min_t(unsigned, 8, length - i));
+
+ if (!intel_sdvo_set_value(intel_sdvo,
+ SDVO_CMD_SET_HBUF_DATA,
+ tmp, 8))
+ return false;
+ }
+
+ return intel_sdvo_set_value(intel_sdvo,
+ SDVO_CMD_SET_HBUF_TXRATE,
+ &tx_rate, 1);
+}
+
static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo)
{
struct dip_infoframe avi_if = {
.ver = DIP_VERSION_AVI,
.len = DIP_LEN_AVI,
};
- uint8_t tx_rate = SDVO_HBUF_TX_VSYNC;
- uint8_t set_buf_index[2] = { 1, 0 };
uint8_t sdvo_data[4 + sizeof(avi_if.body.avi)];
- uint64_t *data = (uint64_t *)sdvo_data;
- unsigned i;
intel_dip_infoframe_csum(&avi_if);
sdvo_data[3] = avi_if.checksum;
memcpy(&sdvo_data[4], &avi_if.body, sizeof(avi_if.body.avi));
- if (!intel_sdvo_set_value(intel_sdvo,
- SDVO_CMD_SET_HBUF_INDEX,
- set_buf_index, 2))
- return false;
-
- for (i = 0; i < sizeof(sdvo_data); i += 8) {
- if (!intel_sdvo_set_value(intel_sdvo,
- SDVO_CMD_SET_HBUF_DATA,
- data, 8))
- return false;
- data++;
- }
-
- return intel_sdvo_set_value(intel_sdvo,
- SDVO_CMD_SET_HBUF_TXRATE,
- &tx_rate, 1);
+ return intel_sdvo_write_infoframe(intel_sdvo, SDVO_HBUF_INDEX_AVI_IF,
+ SDVO_HBUF_TX_VSYNC,
+ sdvo_data, sizeof(sdvo_data));
}
static bool intel_sdvo_set_tv_format(struct intel_sdvo *intel_sdvo)
#define SDVO_CMD_SET_AUDIO_STAT 0x91
#define SDVO_CMD_GET_AUDIO_STAT 0x92
#define SDVO_CMD_SET_HBUF_INDEX 0x93
+ #define SDVO_HBUF_INDEX_ELD 0
+ #define SDVO_HBUF_INDEX_AVI_IF 1
#define SDVO_CMD_GET_HBUF_INDEX 0x94
#define SDVO_CMD_GET_HBUF_INFO 0x95
#define SDVO_CMD_SET_HBUF_AV_SPLIT 0x96
node = kzalloc(sizeof(*node), GFP_KERNEL);
if (!node)
return -ENOMEM;
- node->offset = roundup(offset, mm->block_size);
- node->length = rounddown(offset + length, mm->block_size) - node->offset;
+
+ if (length) {
+ node->offset = roundup(offset, mm->block_size);
+ node->length = rounddown(offset + length, mm->block_size);
+ node->length -= node->offset;
+ }
list_add_tail(&node->nl_entry, &mm->nodes);
list_add_tail(&node->fl_entry, &mm->free);
mm->heap_nodes++;
- mm->heap_size += length;
return 0;
}
* Authors: Ben Skeggs
*/
+#include <subdev/bar.h>
+
#include <engine/software.h>
#include <engine/disp.h>
static void
nv50_disp_intr_vblank(struct nv50_disp_priv *priv, int crtc)
{
+ struct nouveau_bar *bar = nouveau_bar(priv);
struct nouveau_disp *disp = &priv->base;
struct nouveau_software_chan *chan, *temp;
unsigned long flags;
if (chan->vblank.crtc != crtc)
continue;
- nv_wr32(priv, 0x001704, chan->vblank.channel);
- nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma);
-
if (nv_device(priv)->chipset == 0x50) {
+ nv_wr32(priv, 0x001704, chan->vblank.channel);
+ nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma);
+ bar->flush(bar);
nv_wr32(priv, 0x001570, chan->vblank.offset);
nv_wr32(priv, 0x001574, chan->vblank.value);
} else {
- if (nv_device(priv)->chipset >= 0xc0) {
- nv_wr32(priv, 0x06000c,
- upper_32_bits(chan->vblank.offset));
- }
- nv_wr32(priv, 0x060010, chan->vblank.offset);
+ nv_wr32(priv, 0x001718, 0x80000000 | chan->vblank.channel);
+ bar->flush(bar);
+ nv_wr32(priv, 0x06000c,
+ upper_32_bits(chan->vblank.offset));
+ nv_wr32(priv, 0x060010,
+ lower_32_bits(chan->vblank.offset));
nv_wr32(priv, 0x060014, chan->vblank.value);
}
static int
nv40_graph_context_fini(struct nouveau_object *object, bool suspend)
{
- struct nv04_graph_priv *priv = (void *)object->engine;
- struct nv04_graph_chan *chan = (void *)object;
+ struct nv40_graph_priv *priv = (void *)object->engine;
+ struct nv40_graph_chan *chan = (void *)object;
u32 inst = 0x01000000 | nv_gpuobj(chan)->addr >> 4;
int ret = 0;
};
struct nv40_mpeg_chan {
- struct nouveau_mpeg base;
+ struct nouveau_mpeg_chan base;
};
/*******************************************************************************
u32 block_size;
int heap_nodes;
- u32 heap_size;
};
int nouveau_mm_init(struct nouveau_mm *, u32 offset, u32 length, u32 block);
((priv->base.ram.size & 0x000000ff) << 32);
tags = nv_rd32(priv, 0x100320);
- if (tags) {
- ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1);
- if (ret)
- return ret;
+ ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1);
+ if (ret)
+ return ret;
- nv_debug(priv, "%d compression tags\n", tags);
- }
+ nv_debug(priv, "%d compression tags\n", tags);
size = (priv->base.ram.size >> 12) - rsvd_head - rsvd_tail;
switch (device->chipset) {
case DCB_I2C_NVIO_BIT:
port->drive = info.drive & 0x0f;
if (device->card_type < NV_D0) {
- if (info.drive >= ARRAY_SIZE(nv50_i2c_port))
+ if (port->drive >= ARRAY_SIZE(nv50_i2c_port))
break;
port->drive = nv50_i2c_port[port->drive];
port->sense = port->drive;
static void
nv41_vm_flush(struct nouveau_vm *vm)
{
- struct nv04_vm_priv *priv = (void *)vm->vmm;
+ struct nv04_vmmgr_priv *priv = (void *)vm->vmm;
mutex_lock(&nv_subdev(priv)->mutex);
nv_wr32(priv, 0x100810, 0x00000022);
* valid - it's not (rh#613284)
*/
if (nv_encoder->dcb->lvdsconf.use_acpi_for_edid) {
- if (!(nv_connector->edid = nouveau_acpi_edid(dev, connector))) {
+ if ((nv_connector->edid = nouveau_acpi_edid(dev, connector))) {
status = connector_status_connected;
goto out;
}
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_disp *pdisp = nouveau_disp(drm->device);
struct nouveau_display *disp;
+ u32 pclass = dev->pdev->class >> 8;
int ret, gen;
disp = drm->display = kzalloc(sizeof(*disp), GFP_KERNEL);
drm_kms_helper_poll_init(dev);
drm_kms_helper_poll_disable(dev);
- if (nv_device(drm->device)->card_type < NV_50)
- ret = nv04_display_create(dev);
- else
- if (nv_device(drm->device)->card_type < NV_D0)
- ret = nv50_display_create(dev);
- else
- ret = nvd0_display_create(dev);
- if (ret)
- goto disp_create_err;
-
- if (dev->mode_config.num_crtc) {
- ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
+ if (nouveau_modeset == 1 ||
+ (nouveau_modeset < 0 && pclass == PCI_CLASS_DISPLAY_VGA)) {
+ if (nv_device(drm->device)->card_type < NV_50)
+ ret = nv04_display_create(dev);
+ else
+ if (nv_device(drm->device)->card_type < NV_D0)
+ ret = nv50_display_create(dev);
+ else
+ ret = nvd0_display_create(dev);
if (ret)
- goto vblank_err;
+ goto disp_create_err;
+
+ if (dev->mode_config.num_crtc) {
+ ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
+ if (ret)
+ goto vblank_err;
+ }
+
+ nouveau_backlight_init(dev);
}
- nouveau_backlight_init(dev);
return 0;
vblank_err:
nouveau_backlight_exit(dev);
drm_vblank_cleanup(dev);
- disp->dtor(dev);
+ if (disp->dtor)
+ disp->dtor(dev);
drm_kms_helper_poll_fini(dev);
drm_mode_config_cleanup(dev);
static int nouveau_noaccel = 0;
module_param_named(noaccel, nouveau_noaccel, int, 0400);
-MODULE_PARM_DESC(modeset, "enable driver");
-static int nouveau_modeset = -1;
+MODULE_PARM_DESC(modeset, "enable driver (default: auto, "
+ "0 = disabled, 1 = enabled, 2 = headless)");
+int nouveau_modeset = -1;
module_param_named(modeset, nouveau_modeset, int, 0400);
static struct drm_driver driver;
nouveau_pm_fini(dev);
- nouveau_display_fini(dev);
+ if (dev->mode_config.num_crtc)
+ nouveau_display_fini(dev);
nouveau_display_destroy(dev);
nouveau_irq_fini(dev);
pm_state.event == PM_EVENT_PRETHAW)
return 0;
- NV_INFO(drm, "suspending fbcon...\n");
- nouveau_fbcon_set_suspend(dev, 1);
+ if (dev->mode_config.num_crtc) {
+ NV_INFO(drm, "suspending fbcon...\n");
+ nouveau_fbcon_set_suspend(dev, 1);
- NV_INFO(drm, "suspending display...\n");
- ret = nouveau_display_suspend(dev);
- if (ret)
- return ret;
+ NV_INFO(drm, "suspending display...\n");
+ ret = nouveau_display_suspend(dev);
+ if (ret)
+ return ret;
+ }
NV_INFO(drm, "evicting buffers...\n");
ttm_bo_evict_mm(&drm->ttm.bdev, TTM_PL_VRAM);
nouveau_client_init(&cli->base);
}
- NV_INFO(drm, "resuming display...\n");
- nouveau_display_resume(dev);
+ if (dev->mode_config.num_crtc) {
+ NV_INFO(drm, "resuming display...\n");
+ nouveau_display_resume(dev);
+ }
return ret;
}
nouveau_irq_postinstall(dev);
nouveau_pm_resume(dev);
- NV_INFO(drm, "resuming display...\n");
- nouveau_display_resume(dev);
+ if (dev->mode_config.num_crtc) {
+ NV_INFO(drm, "resuming display...\n");
+ nouveau_display_resume(dev);
+ }
return 0;
}
#ifdef CONFIG_VGA_CONSOLE
if (vgacon_text_force())
nouveau_modeset = 0;
- else
#endif
- nouveau_modeset = 1;
}
if (!nouveau_modeset)
nv_info((cli), fmt, ##args); \
} while (0)
+extern int nouveau_modeset;
+
#endif
nv_subdev(pmc)->intr(nv_subdev(pmc));
- if (device->card_type >= NV_D0) {
- if (nv_rd32(device, 0x000100) & 0x04000000)
- nvd0_display_intr(dev);
- } else
- if (device->card_type >= NV_50) {
- if (nv_rd32(device, 0x000100) & 0x04000000)
- nv50_display_intr(dev);
+ if (dev->mode_config.num_crtc) {
+ if (device->card_type >= NV_D0) {
+ if (nv_rd32(device, 0x000100) & 0x04000000)
+ nvd0_display_intr(dev);
+ } else
+ if (device->card_type >= NV_50) {
+ if (nv_rd32(device, 0x000100) & 0x04000000)
+ nv50_display_intr(dev);
+ }
}
return IRQ_HANDLED;
NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode);
if (blue == 0x18) {
- NV_INFO(drm, "Load detected on head A\n");
+ NV_DEBUG(drm, "Load detected on head A\n");
return connector_status_connected;
}
if (nv17_dac_sample_load(encoder) &
NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI) {
- NV_INFO(drm, "Load detected on output %c\n",
- '@' + ffs(dcb->or));
+ NV_DEBUG(drm, "Load detected on output %c\n",
+ '@' + ffs(dcb->or));
return connector_status_connected;
} else {
return connector_status_disconnected;
helper->dpms(encoder, DRM_MODE_DPMS_ON);
- NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n",
- drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
- nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
+ NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
+ drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
+ nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
}
void nv04_dac_update_dacclk(struct drm_encoder *encoder, bool enable)
return;
nv_encoder->last_dpms = mode;
- NV_INFO(drm, "Setting dpms mode %d on vga encoder (output %d)\n",
- mode, nv_encoder->dcb->index);
+ NV_DEBUG(drm, "Setting dpms mode %d on vga encoder (output %d)\n",
+ mode, nv_encoder->dcb->index);
nv04_dac_update_dacclk(encoder, mode == DRM_MODE_DPMS_ON);
}
helper->dpms(encoder, DRM_MODE_DPMS_ON);
- NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n",
- drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
- nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
+ NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
+ drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
+ nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
}
static void nv04_dfp_update_backlight(struct drm_encoder *encoder, int mode)
return;
nv_encoder->last_dpms = mode;
- NV_INFO(drm, "Setting dpms mode %d on lvds encoder (output %d)\n",
- mode, nv_encoder->dcb->index);
+ NV_DEBUG(drm, "Setting dpms mode %d on lvds encoder (output %d)\n",
+ mode, nv_encoder->dcb->index);
if (was_powersaving && is_powersaving_dpms(mode))
return;
return;
nv_encoder->last_dpms = mode;
- NV_INFO(drm, "Setting dpms mode %d on tmds encoder (output %d)\n",
- mode, nv_encoder->dcb->index);
+ NV_DEBUG(drm, "Setting dpms mode %d on tmds encoder (output %d)\n",
+ mode, nv_encoder->dcb->index);
nv04_dfp_update_backlight(encoder, mode);
nv04_dfp_update_fp_control(encoder, mode);
struct nv04_mode_state *state = &nv04_display(dev)->mode_reg;
uint8_t crtc1A;
- NV_INFO(drm, "Setting dpms mode %d on TV encoder (output %d)\n",
- mode, nv_encoder->dcb->index);
+ NV_DEBUG(drm, "Setting dpms mode %d on TV encoder (output %d)\n",
+ mode, nv_encoder->dcb->index);
state->pllsel &= ~(PLLSEL_TV_CRTC1_MASK | PLLSEL_TV_CRTC2_MASK);
helper->dpms(encoder, DRM_MODE_DPMS_ON);
- NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n",
- drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index,
- '@' + ffs(nv_encoder->dcb->or));
+ NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
+ drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
}
static void nv04_tv_destroy(struct drm_encoder *encoder)
return ATOM_PPLL2;
DRM_ERROR("unable to allocate a PPLL\n");
return ATOM_PPLL_INVALID;
- } else {
- if (ASIC_IS_AVIVO(rdev)) {
- /* in DP mode, the DP ref clock can come from either PPLL
- * depending on the asic:
- * DCE3: PPLL1 or PPLL2
- */
- if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(radeon_crtc->encoder))) {
- /* use the same PPLL for all DP monitors */
- pll = radeon_get_shared_dp_ppll(crtc);
- if (pll != ATOM_PPLL_INVALID)
- return pll;
- } else {
- /* use the same PPLL for all monitors with the same clock */
- pll = radeon_get_shared_nondp_ppll(crtc);
- if (pll != ATOM_PPLL_INVALID)
- return pll;
- }
- /* all other cases */
- pll_in_use = radeon_get_pll_use_mask(crtc);
+ } else if (ASIC_IS_AVIVO(rdev)) {
+ /* in DP mode, the DP ref clock can come from either PPLL
+ * depending on the asic:
+ * DCE3: PPLL1 or PPLL2
+ */
+ if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(radeon_crtc->encoder))) {
+ /* use the same PPLL for all DP monitors */
+ pll = radeon_get_shared_dp_ppll(crtc);
+ if (pll != ATOM_PPLL_INVALID)
+ return pll;
+ } else {
+ /* use the same PPLL for all monitors with the same clock */
+ pll = radeon_get_shared_nondp_ppll(crtc);
+ if (pll != ATOM_PPLL_INVALID)
+ return pll;
+ }
+ /* all other cases */
+ pll_in_use = radeon_get_pll_use_mask(crtc);
+ /* the order shouldn't matter here, but we probably
+ * need this until we have atomic modeset
+ */
+ if (rdev->flags & RADEON_IS_IGP) {
if (!(pll_in_use & (1 << ATOM_PPLL1)))
return ATOM_PPLL1;
if (!(pll_in_use & (1 << ATOM_PPLL2)))
return ATOM_PPLL2;
- DRM_ERROR("unable to allocate a PPLL\n");
- return ATOM_PPLL_INVALID;
} else {
- /* on pre-R5xx asics, the crtc to pll mapping is hardcoded */
- return radeon_crtc->crtc_id;
+ if (!(pll_in_use & (1 << ATOM_PPLL2)))
+ return ATOM_PPLL2;
+ if (!(pll_in_use & (1 << ATOM_PPLL1)))
+ return ATOM_PPLL1;
}
+ DRM_ERROR("unable to allocate a PPLL\n");
+ return ATOM_PPLL_INVALID;
+ } else {
+ /* on pre-R5xx asics, the crtc to pll mapping is hardcoded */
+ return radeon_crtc->crtc_id;
}
}
WREG32(BIF_FB_EN, FB_READ_EN | FB_WRITE_EN);
for (i = 0; i < rdev->num_crtc; i++) {
- if (save->crtc_enabled) {
+ if (save->crtc_enabled[i]) {
if (ASIC_IS_DCE6(rdev)) {
tmp = RREG32(EVERGREEN_CRTC_BLANK_CONTROL + crtc_offsets[i]);
tmp |= EVERGREEN_CRTC_BLANK_DATA_EN;
/* macro tile width & height */
palign = (8 * surf->bankw * track->npipes) * surf->mtilea;
halign = (8 * surf->bankh * surf->nbanks) / surf->mtilea;
- mtileb = (palign / 8) * (halign / 8) * tileb;;
+ mtileb = (palign / 8) * (halign / 8) * tileb;
mtile_pr = surf->nbx / palign;
mtile_ps = (mtile_pr * surf->nby) / halign;
surf->layer_size = mtile_ps * mtileb * slice_pt;
/* check config regs */
switch (reg) {
case GRBM_GFX_INDEX:
+ case CP_STRMOUT_CNTL:
+ case CP_COHER_CNTL:
+ case CP_COHER_SIZE:
case VGT_VTX_VECT_EJECT_REG:
case VGT_CACHE_INVALIDATION:
case VGT_GS_VERTEX_REUSE:
#define FB_READ_EN (1 << 0)
#define FB_WRITE_EN (1 << 1)
+#define CP_STRMOUT_CNTL 0x84FC
+
+#define CP_COHER_CNTL 0x85F0
+#define CP_COHER_SIZE 0x85F4
#define CP_COHER_BASE 0x85F8
#define CP_STALLED_STAT1 0x8674
#define CP_STALLED_STAT2 0x8678
}
/**
- * radeon_atpx_switchto - switch to the requested GPU
+ * radeon_atpx_power_state - power down/up the requested GPU
*
- * @id: GPU to switch to
+ * @id: GPU to power down/up
* @state: requested power state (0 = off, 1 = on)
*
* Execute the necessary ATPX function to power down/up the discrete GPU
struct drm_mode_object *obj;
int i;
enum drm_connector_status ret = connector_status_disconnected;
- bool dret = false;
+ bool dret = false, broken_edid = false;
if (!force && radeon_check_hpd_status_unchanged(connector))
return connector->status;
ret = connector_status_disconnected;
DRM_ERROR("%s: detected RS690 floating bus bug, stopping ddc detect\n", drm_get_connector_name(connector));
radeon_connector->ddc_bus = NULL;
+ } else {
+ ret = connector_status_connected;
+ broken_edid = true; /* defer use_digital to later */
}
} else {
radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL);
encoder_funcs = encoder->helper_private;
if (encoder_funcs->detect) {
- if (ret != connector_status_connected) {
- ret = encoder_funcs->detect(encoder, connector);
- if (ret == connector_status_connected) {
- radeon_connector->use_digital = false;
+ if (!broken_edid) {
+ if (ret != connector_status_connected) {
+ /* deal with analog monitors without DDC */
+ ret = encoder_funcs->detect(encoder, connector);
+ if (ret == connector_status_connected) {
+ radeon_connector->use_digital = false;
+ }
+ if (ret != connector_status_disconnected)
+ radeon_connector->detected_by_load = true;
}
- if (ret != connector_status_disconnected)
- radeon_connector->detected_by_load = true;
+ } else {
+ enum drm_connector_status lret;
+ /* assume digital unless load detected otherwise */
+ radeon_connector->use_digital = true;
+ lret = encoder_funcs->detect(encoder, connector);
+ DRM_DEBUG_KMS("load_detect %x returned: %x\n",encoder->encoder_type,lret);
+ if (lret == connector_status_connected)
+ radeon_connector->use_digital = false;
}
break;
}
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
+ uint32_t crtc_ext_cntl = 0;
uint32_t mask;
if (radeon_crtc->crtc_id)
RADEON_CRTC_VSYNC_DIS |
RADEON_CRTC_HSYNC_DIS);
+ /*
+ * On all dual CRTC GPUs this bit controls the CRTC of the primary DAC.
+ * Therefore it is set in the DAC DMPS function.
+ * This is different for GPU's with a single CRTC but a primary and a
+ * TV DAC: here it controls the single CRTC no matter where it is
+ * routed. Therefore we set it here.
+ */
+ if (rdev->flags & RADEON_SINGLE_CRTC)
+ crtc_ext_cntl = RADEON_CRTC_CRT_ON;
+
switch (mode) {
case DRM_MODE_DPMS_ON:
radeon_crtc->enabled = true;
else {
WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_EN, ~(RADEON_CRTC_EN |
RADEON_CRTC_DISP_REQ_EN_B));
- WREG32_P(RADEON_CRTC_EXT_CNTL, 0, ~mask);
+ WREG32_P(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl, ~(mask | crtc_ext_cntl));
}
drm_vblank_post_modeset(dev, radeon_crtc->crtc_id);
radeon_crtc_load_lut(crtc);
else {
WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_DISP_REQ_EN_B, ~(RADEON_CRTC_EN |
RADEON_CRTC_DISP_REQ_EN_B));
- WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~mask);
+ WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~(mask | crtc_ext_cntl));
}
radeon_crtc->enabled = false;
/* adjust pm to dpms changes AFTER disabling crtcs */
break;
}
- WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
+ /* handled in radeon_crtc_dpms() */
+ if (!(rdev->flags & RADEON_SINGLE_CRTC))
+ WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
WREG32(RADEON_DAC_CNTL, dac_cntl);
WREG32(RADEON_DAC_MACRO_CNTL, dac_macro_cntl);
if (ASIC_IS_R300(rdev))
tmp |= (0x1b6 << RADEON_DAC_FORCE_DATA_SHIFT);
+ else if (ASIC_IS_RV100(rdev))
+ tmp |= (0x1ac << RADEON_DAC_FORCE_DATA_SHIFT);
else
tmp |= (0x180 << RADEON_DAC_FORCE_DATA_SHIFT);
tmp |= RADEON_DAC_RANGE_CNTL_PS2 | RADEON_DAC_CMP_EN;
WREG32(RADEON_DAC_CNTL, tmp);
+ tmp = dac_macro_cntl;
tmp &= ~(RADEON_DAC_PDWN_R |
RADEON_DAC_PDWN_G |
RADEON_DAC_PDWN_B);
} else {
if (is_tv)
WREG32(RADEON_TV_MASTER_CNTL, tv_master_cntl);
- else
+ /* handled in radeon_crtc_dpms() */
+ else if (!(rdev->flags & RADEON_SINGLE_CRTC))
WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
}
return found;
}
+static bool radeon_legacy_ext_dac_detect(struct drm_encoder *encoder,
+ struct drm_connector *connector)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ uint32_t gpio_monid, fp2_gen_cntl, disp_output_cntl, crtc2_gen_cntl;
+ uint32_t disp_lin_trans_grph_a, disp_lin_trans_grph_b, disp_lin_trans_grph_c;
+ uint32_t disp_lin_trans_grph_d, disp_lin_trans_grph_e, disp_lin_trans_grph_f;
+ uint32_t tmp, crtc2_h_total_disp, crtc2_v_total_disp;
+ uint32_t crtc2_h_sync_strt_wid, crtc2_v_sync_strt_wid;
+ bool found = false;
+ int i;
+
+ /* save the regs we need */
+ gpio_monid = RREG32(RADEON_GPIO_MONID);
+ fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
+ disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
+ crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+ disp_lin_trans_grph_a = RREG32(RADEON_DISP_LIN_TRANS_GRPH_A);
+ disp_lin_trans_grph_b = RREG32(RADEON_DISP_LIN_TRANS_GRPH_B);
+ disp_lin_trans_grph_c = RREG32(RADEON_DISP_LIN_TRANS_GRPH_C);
+ disp_lin_trans_grph_d = RREG32(RADEON_DISP_LIN_TRANS_GRPH_D);
+ disp_lin_trans_grph_e = RREG32(RADEON_DISP_LIN_TRANS_GRPH_E);
+ disp_lin_trans_grph_f = RREG32(RADEON_DISP_LIN_TRANS_GRPH_F);
+ crtc2_h_total_disp = RREG32(RADEON_CRTC2_H_TOTAL_DISP);
+ crtc2_v_total_disp = RREG32(RADEON_CRTC2_V_TOTAL_DISP);
+ crtc2_h_sync_strt_wid = RREG32(RADEON_CRTC2_H_SYNC_STRT_WID);
+ crtc2_v_sync_strt_wid = RREG32(RADEON_CRTC2_V_SYNC_STRT_WID);
+
+ tmp = RREG32(RADEON_GPIO_MONID);
+ tmp &= ~RADEON_GPIO_A_0;
+ WREG32(RADEON_GPIO_MONID, tmp);
+
+ WREG32(RADEON_FP2_GEN_CNTL, (RADEON_FP2_ON |
+ RADEON_FP2_PANEL_FORMAT |
+ R200_FP2_SOURCE_SEL_TRANS_UNIT |
+ RADEON_FP2_DVO_EN |
+ R200_FP2_DVO_RATE_SEL_SDR));
+
+ WREG32(RADEON_DISP_OUTPUT_CNTL, (RADEON_DISP_DAC_SOURCE_RMX |
+ RADEON_DISP_TRANS_MATRIX_GRAPHICS));
+
+ WREG32(RADEON_CRTC2_GEN_CNTL, (RADEON_CRTC2_EN |
+ RADEON_CRTC2_DISP_REQ_EN_B));
+
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, 0x00000000);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, 0x000003f0);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, 0x00000000);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, 0x000003f0);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, 0x00000000);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, 0x000003f0);
+
+ WREG32(RADEON_CRTC2_H_TOTAL_DISP, 0x01000008);
+ WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, 0x00000800);
+ WREG32(RADEON_CRTC2_V_TOTAL_DISP, 0x00080001);
+ WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, 0x00000080);
+
+ for (i = 0; i < 200; i++) {
+ tmp = RREG32(RADEON_GPIO_MONID);
+ if (tmp & RADEON_GPIO_Y_0)
+ found = true;
+
+ if (found)
+ break;
+
+ if (!drm_can_sleep())
+ mdelay(1);
+ else
+ msleep(1);
+ }
+
+ /* restore the regs we used */
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, disp_lin_trans_grph_a);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, disp_lin_trans_grph_b);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, disp_lin_trans_grph_c);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, disp_lin_trans_grph_d);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, disp_lin_trans_grph_e);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, disp_lin_trans_grph_f);
+ WREG32(RADEON_CRTC2_H_TOTAL_DISP, crtc2_h_total_disp);
+ WREG32(RADEON_CRTC2_V_TOTAL_DISP, crtc2_v_total_disp);
+ WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, crtc2_h_sync_strt_wid);
+ WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, crtc2_v_sync_strt_wid);
+ WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
+ WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
+ WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
+ WREG32(RADEON_GPIO_MONID, gpio_monid);
+
+ return found;
+}
+
static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder *encoder,
struct drm_connector *connector)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
- uint32_t crtc2_gen_cntl, tv_dac_cntl, dac_cntl2, dac_ext_cntl;
- uint32_t disp_hw_debug, disp_output_cntl, gpiopad_a, pixclks_cntl, tmp;
+ uint32_t crtc2_gen_cntl = 0, tv_dac_cntl, dac_cntl2, dac_ext_cntl;
+ uint32_t gpiopad_a = 0, pixclks_cntl, tmp;
+ uint32_t disp_output_cntl = 0, disp_hw_debug = 0, crtc_ext_cntl = 0;
enum drm_connector_status found = connector_status_disconnected;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv;
return connector_status_disconnected;
}
+ /* R200 uses an external DAC for secondary DAC */
+ if (rdev->family == CHIP_R200) {
+ if (radeon_legacy_ext_dac_detect(encoder, connector))
+ found = connector_status_connected;
+ return found;
+ }
+
/* save the regs we need */
pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL);
- gpiopad_a = ASIC_IS_R300(rdev) ? RREG32(RADEON_GPIOPAD_A) : 0;
- disp_output_cntl = ASIC_IS_R300(rdev) ? RREG32(RADEON_DISP_OUTPUT_CNTL) : 0;
- disp_hw_debug = ASIC_IS_R300(rdev) ? 0 : RREG32(RADEON_DISP_HW_DEBUG);
- crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+
+ if (rdev->flags & RADEON_SINGLE_CRTC) {
+ crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
+ } else {
+ if (ASIC_IS_R300(rdev)) {
+ gpiopad_a = RREG32(RADEON_GPIOPAD_A);
+ disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
+ } else {
+ disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG);
+ }
+ crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+ }
tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
dac_ext_cntl = RREG32(RADEON_DAC_EXT_CNTL);
dac_cntl2 = RREG32(RADEON_DAC_CNTL2);
| RADEON_PIX2CLK_DAC_ALWAYS_ONb);
WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
- if (ASIC_IS_R300(rdev))
- WREG32_P(RADEON_GPIOPAD_A, 1, ~1);
-
- tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK;
- tmp |= RADEON_CRTC2_CRT2_ON |
- (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT);
-
- WREG32(RADEON_CRTC2_GEN_CNTL, tmp);
-
- if (ASIC_IS_R300(rdev)) {
- tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK;
- tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2;
- WREG32(RADEON_DISP_OUTPUT_CNTL, tmp);
+ if (rdev->flags & RADEON_SINGLE_CRTC) {
+ tmp = crtc_ext_cntl | RADEON_CRTC_CRT_ON;
+ WREG32(RADEON_CRTC_EXT_CNTL, tmp);
} else {
- tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL;
- WREG32(RADEON_DISP_HW_DEBUG, tmp);
+ tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK;
+ tmp |= RADEON_CRTC2_CRT2_ON |
+ (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT);
+ WREG32(RADEON_CRTC2_GEN_CNTL, tmp);
+
+ if (ASIC_IS_R300(rdev)) {
+ WREG32_P(RADEON_GPIOPAD_A, 1, ~1);
+ tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK;
+ tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2;
+ WREG32(RADEON_DISP_OUTPUT_CNTL, tmp);
+ } else {
+ tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL;
+ WREG32(RADEON_DISP_HW_DEBUG, tmp);
+ }
}
tmp = RADEON_TV_DAC_NBLANK |
WREG32(RADEON_DAC_CNTL2, dac_cntl2);
WREG32(RADEON_DAC_EXT_CNTL, dac_ext_cntl);
WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
- WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
- if (ASIC_IS_R300(rdev)) {
- WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
- WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
+ if (rdev->flags & RADEON_SINGLE_CRTC) {
+ WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
} else {
- WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
+ WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
+ if (ASIC_IS_R300(rdev)) {
+ WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
+ WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
+ } else {
+ WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
+ }
}
+
WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
return found;
/* check config regs */
switch (reg) {
case GRBM_GFX_INDEX:
+ case CP_STRMOUT_CNTL:
case VGT_VTX_VECT_EJECT_REG:
case VGT_CACHE_INVALIDATION:
case VGT_ESGS_RING_SIZE:
# define RDERR_INT_ENABLE (1 << 0)
# define GUI_IDLE_INT_ENABLE (1 << 19)
+#define CP_STRMOUT_CNTL 0x84FC
#define SCRATCH_REG0 0x8500
#define SCRATCH_REG1 0x8504
#define SCRATCH_REG2 0x8508
int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr,
const char *front, char **urb_buf_ptr,
- u32 byte_offset, u32 byte_width,
+ u32 byte_offset, u32 device_byte_offset, u32 byte_width,
int *ident_ptr, int *sent_ptr);
int udl_dumb_create(struct drm_file *file_priv,
list_for_each_entry(cur, &fbdefio->pagelist, lru) {
if (udl_render_hline(dev, (ufbdev->ufb.base.bits_per_pixel / 8),
- &urb, (char *) info->fix.smem_start,
- &cmd, cur->index << PAGE_SHIFT,
- PAGE_SIZE, &bytes_identical, &bytes_sent))
+ &urb, (char *) info->fix.smem_start,
+ &cmd, cur->index << PAGE_SHIFT,
+ cur->index << PAGE_SHIFT,
+ PAGE_SIZE, &bytes_identical, &bytes_sent))
goto error;
bytes_rendered += PAGE_SIZE;
}
for (i = y; i < y + height ; i++) {
const int line_offset = fb->base.pitches[0] * i;
const int byte_offset = line_offset + (x * bpp);
-
+ const int dev_byte_offset = (fb->base.width * bpp * i) + (x * bpp);
if (udl_render_hline(dev, bpp, &urb,
(char *) fb->obj->vmapping,
- &cmd, byte_offset, width * bpp,
+ &cmd, byte_offset, dev_byte_offset,
+ width * bpp,
&bytes_identical, &bytes_sent))
goto error;
}
*/
int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr,
const char *front, char **urb_buf_ptr,
- u32 byte_offset, u32 byte_width,
+ u32 byte_offset, u32 device_byte_offset,
+ u32 byte_width,
int *ident_ptr, int *sent_ptr)
{
const u8 *line_start, *line_end, *next_pixel;
- u32 base16 = 0 + (byte_offset / bpp) * 2;
+ u32 base16 = 0 + (device_byte_offset / bpp) * 2;
struct urb *urb = *urb_ptr;
u8 *cmd = *urb_buf_ptr;
u8 *cmd_end = (u8 *) urb->transfer_buffer + urb->transfer_buffer_length;
BUG_ON(!atomic_read(&bo->reserved));
BUG_ON(old_mem_type != TTM_PL_VRAM &&
- old_mem_type != VMW_PL_FLAG_GMR);
+ old_mem_type != VMW_PL_GMR);
pl_flags = TTM_PL_FLAG_VRAM | VMW_PL_FLAG_GMR | TTM_PL_FLAG_CACHED;
if (pin)
struct drm_device *dev = pci_get_drvdata(pdev);
struct vmw_private *dev_priv = vmw_priv(dev);
+ mutex_lock(&dev_priv->hw_mutex);
+ vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2);
+ (void) vmw_read(dev_priv, SVGA_REG_ID);
+ mutex_unlock(&dev_priv->hw_mutex);
+
/**
* Reclaim 3d reference held by fbdev and potentially
* start fifo.
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
+ .driver_data = APPLE_HAS_FN },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ }
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b
#define MS_RDESC 0x08
#define MS_NOGET 0x10
#define MS_DUPLICATE_USAGES 0x20
+#define MS_RDESC_3K 0x40
-/*
- * Microsoft Wireless Desktop Receiver (Model 1028) has
- * 'Usage Min/Max' where it ought to have 'Physical Min/Max'
- */
static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+ /*
+ * Microsoft Wireless Desktop Receiver (Model 1028) has
+ * 'Usage Min/Max' where it ought to have 'Physical Min/Max'
+ */
if ((quirks & MS_RDESC) && *rsize == 571 && rdesc[557] == 0x19 &&
rdesc[559] == 0x29) {
hid_info(hdev, "fixing up Microsoft Wireless Receiver Model 1028 report descriptor\n");
rdesc[557] = 0x35;
rdesc[559] = 0x45;
}
+ /* the same as above (s/usage/physical/) */
+ if ((quirks & MS_RDESC_3K) && *rsize == 106 &&
+ !memcmp((char []){ 0x19, 0x00, 0x29, 0xff },
+ &rdesc[94], 4)) {
+ rdesc[94] = 0x35;
+ rdesc[96] = 0x45;
+ }
return rdesc;
}
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB),
.driver_data = MS_PRESENTER },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K),
- .driver_data = MS_ERGONOMY },
+ .driver_data = MS_ERGONOMY | MS_RDESC_3K },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0),
.driver_data = MS_NOGET },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500),
},
{ .name = MT_CLS_GENERALTOUCH_PWT_TENFINGERS,
.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP |
- MT_QUIRK_SLOT_IS_CONTACTNUMBER,
- .maxcontacts = 10
+ MT_QUIRK_SLOT_IS_CONTACTNUMBER
},
{ .name = MT_CLS_FLATFROG,
* contact max are global to the report */
td->last_field_index = field->index;
return -1;
- }
case HID_DG_TOUCH:
/* Legacy devices use TIPSWITCH and not TOUCH.
* Let's just ignore this field. */
return -1;
+ }
/* let hid-input decide for the others */
return 0;
static struct class *hidraw_class;
static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES];
static DEFINE_MUTEX(minors_lock);
-static void drop_ref(struct hidraw *hid, int exists_bit);
static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
{
__u8 *buf;
int ret = 0;
- if (!hidraw_table[minor] || !hidraw_table[minor]->exist) {
+ if (!hidraw_table[minor]) {
ret = -ENODEV;
goto out;
}
}
mutex_lock(&minors_lock);
- if (!hidraw_table[minor] || !hidraw_table[minor]->exist) {
+ if (!hidraw_table[minor]) {
err = -ENODEV;
goto out_unlock;
}
static int hidraw_release(struct inode * inode, struct file * file)
{
unsigned int minor = iminor(inode);
+ struct hidraw *dev;
struct hidraw_list *list = file->private_data;
+ int ret;
+ int i;
+
+ mutex_lock(&minors_lock);
+ if (!hidraw_table[minor]) {
+ ret = -ENODEV;
+ goto unlock;
+ }
- drop_ref(hidraw_table[minor], 0);
list_del(&list->node);
+ dev = hidraw_table[minor];
+ if (!--dev->open) {
+ if (list->hidraw->exist) {
+ hid_hw_power(dev->hid, PM_HINT_NORMAL);
+ hid_hw_close(dev->hid);
+ } else {
+ kfree(list->hidraw);
+ }
+ }
+
+ for (i = 0; i < HIDRAW_BUFFER_SIZE; ++i)
+ kfree(list->buffer[i].value);
kfree(list);
- return 0;
+ ret = 0;
+unlock:
+ mutex_unlock(&minors_lock);
+
+ return ret;
}
static long hidraw_ioctl(struct file *file, unsigned int cmd,
void hidraw_disconnect(struct hid_device *hid)
{
struct hidraw *hidraw = hid->hidraw;
- drop_ref(hidraw, 1);
+
+ mutex_lock(&minors_lock);
+ hidraw->exist = 0;
+
+ device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor));
+
+ hidraw_table[hidraw->minor] = NULL;
+
+ if (hidraw->open) {
+ hid_hw_close(hid);
+ wake_up_interruptible(&hidraw->wait);
+ } else {
+ kfree(hidraw);
+ }
+ mutex_unlock(&minors_lock);
}
EXPORT_SYMBOL_GPL(hidraw_disconnect);
unregister_chrdev_region(dev_id, HIDRAW_MAX_DEVICES);
}
-
-static void drop_ref(struct hidraw *hidraw, int exists_bit)
-{
- mutex_lock(&minors_lock);
- if (exists_bit) {
- hid_hw_close(hidraw->hid);
- hidraw->exist = 0;
- if (hidraw->open)
- wake_up_interruptible(&hidraw->wait);
- } else {
- --hidraw->open;
- }
-
- if (!hidraw->open && !hidraw->exist) {
- device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor));
- hidraw_table[hidraw->minor] = NULL;
- kfree(hidraw);
- }
- mutex_unlock(&minors_lock);
-}
* ASB100-A supports pwm1, while plain ASB100 does not. There is no known
* way for the driver to tell which one is there.
*
- * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
* asb100 7 3 1 4 0x31 0x0694 yes no
*/
* fam15h_power.c - AMD Family 15h processor power monitoring
*
* Copyright (c) 2011 Advanced Micro Devices, Inc.
- * Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+ * Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
*
*
* This driver is free software; you can redistribute it and/or
#include <asm/processor.h>
MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor");
-MODULE_AUTHOR("Andreas Herrmann <andreas.herrmann3@amd.com>");
+MODULE_AUTHOR("Andreas Herrmann <herrmann.der.user@googlemail.com>");
MODULE_LICENSE("GPL");
/* D18F3 */
.driver = {
.name = "gpio-fan",
.pm = GPIO_FAN_PM,
+#ifdef CONFIG_OF_GPIO
.of_match_table = of_match_ptr(of_gpio_fan_match),
+#endif
},
};
mutex_init(&data->lock);
mutex_init(&data->update_lock);
data->name = w83627ehf_device_names[sio_data->kind];
+ data->bank = 0xff; /* Force initial bank selection */
platform_set_drvdata(pdev, data);
/* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */
/*
* Supports following chips:
*
- * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
* w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC)
* w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
* w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC)
/*
* Supports following chips:
*
- * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
* as99127f 7 3 0 3 0x31 0x12c3 yes no
* as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
* w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
/*
* Supports following chips:
*
- * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
* w83791d 10 5 5 3 0x71 0x5ca3 yes no
*
* The w83791d chip appears to be part way between the 83781d and the
/*
* Supports following chips:
*
- * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
* w83792d 9 7 7 3 0x7a 0x5ca3 yes no
*/
/*
* Supports following chips:
*
- * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
* w83l786ng 3 2 2 2 0x7b 0x5ca3 yes no
*/
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-$(CONFIG_I2C_MUX) += i2c-mux.o
obj-y += algos/ busses/ muxes/
+obj-$(CONFIG_I2C_STUB) += i2c-stub.o
ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
CFLAGS_i2c-core.o := -Wno-deprecated-declarations
tristate "Intel 82801 (ICH/PCH)"
depends on PCI
select CHECK_SIGNATURE if X86 && DMI
- select GPIOLIB if I2C_MUX
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
-obj-$(CONFIG_I2C_STUB) += i2c-stub.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
#include <linux/wait.h>
#include <linux/err.h>
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
#include <linux/gpio.h>
#include <linux/i2c-mux-gpio.h>
#include <linux/platform_device.h>
int len;
u8 *data;
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
const struct i801_mux_config *mux_drvdata;
struct platform_device *mux_pdev;
#endif
static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {}
#endif /* CONFIG_X86 && CONFIG_DMI */
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
.gpio_chip = "gpio_ich",
.values = { 0x02, 0x03 },
id = dmi_first_match(mux_dmi_table);
if (id) {
- /* Remove from branch classes from trunk */
+ /* Remove branch classes from trunk */
mux_config = id->driver_data;
for (i = 0; i < mux_config->n_values; i++)
class &= ~mux_config->classes[i];
#include <linux/of_device.h>
#include <linux/of_i2c.h>
#include <linux/pinctrl/consumer.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/i2c-imx.h>
/** Defines ********************************************************************
{ 3072, 0x1E }, { 3840, 0x1F }
};
+enum imx_i2c_type {
+ IMX1_I2C,
+ IMX21_I2C,
+};
+
struct imx_i2c_struct {
struct i2c_adapter adapter;
struct clk *clk;
unsigned int disable_delay;
int stopped;
unsigned int ifdr; /* IMX_I2C_IFDR */
+ enum imx_i2c_type devtype;
+};
+
+static struct platform_device_id imx_i2c_devtype[] = {
+ {
+ .name = "imx1-i2c",
+ .driver_data = IMX1_I2C,
+ }, {
+ .name = "imx21-i2c",
+ .driver_data = IMX21_I2C,
+ }, {
+ /* sentinel */
+ }
};
+MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
static const struct of_device_id i2c_imx_dt_ids[] = {
- { .compatible = "fsl,imx1-i2c", },
+ { .compatible = "fsl,imx1-i2c", .data = &imx_i2c_devtype[IMX1_I2C], },
+ { .compatible = "fsl,imx21-i2c", .data = &imx_i2c_devtype[IMX21_I2C], },
{ /* sentinel */ }
};
+static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
+{
+ return i2c_imx->devtype == IMX1_I2C;
+}
+
/** Functions for IMX I2C adapter driver ***************************************
*******************************************************************************/
temp &= ~(I2CR_MSTA | I2CR_MTX);
writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
}
- if (cpu_is_mx1()) {
+ if (is_imx1_i2c(i2c_imx)) {
/*
* This delay caused by an i.MXL hardware bug.
* If no (or too short) delay, no "STOP" bit will be generated.
static int __init i2c_imx_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
+ &pdev->dev);
struct imx_i2c_struct *i2c_imx;
struct resource *res;
struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
return -ENOMEM;
}
+ if (of_id)
+ pdev->id_entry = of_id->data;
+ i2c_imx->devtype = pdev->id_entry->driver_data;
+
/* Setup i2c_imx driver structure */
strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
i2c_imx->adapter.owner = THIS_MODULE;
.name = DRIVER_NAME,
.owner = THIS_MODULE,
.of_match_table = i2c_imx_dt_ids,
- }
+ },
+ .id_table = imx_i2c_devtype,
};
static int __init i2c_adap_imx_init(void)
/*
* Freescale MXS I2C bus driver
*
- * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
+ * Copyright (C) 2011-2012 Wolfram Sang, Pengutronix e.K.
*
* based on a (non-working) driver which was:
*
#define DRIVER_NAME "mxs-i2c"
-static bool use_pioqueue;
-module_param(use_pioqueue, bool, 0);
-MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA");
-
#define MXS_I2C_CTRL0 (0x00)
#define MXS_I2C_CTRL0_SET (0x04)
MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \
MXS_I2C_CTRL1_SLAVE_IRQ)
-#define MXS_I2C_QUEUECTRL (0x60)
-#define MXS_I2C_QUEUECTRL_SET (0x64)
-#define MXS_I2C_QUEUECTRL_CLR (0x68)
-
-#define MXS_I2C_QUEUECTRL_QUEUE_RUN 0x20
-#define MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE 0x04
-
-#define MXS_I2C_QUEUESTAT (0x70)
-#define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000
-#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F
-
-#define MXS_I2C_QUEUECMD (0x80)
-
-#define MXS_I2C_QUEUEDATA (0x90)
-
-#define MXS_I2C_DATA (0xa0)
-
#define MXS_CMD_I2C_SELECT (MXS_I2C_CTRL0_RETAIN_CLOCK | \
MXS_I2C_CTRL0_PRE_SEND_START | \
const struct mxs_i2c_speed_config *speed;
/* DMA support components */
- bool dma_mode;
int dma_channel;
struct dma_chan *dmach;
struct mxs_dma_data dma_data;
writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
- if (i2c->dma_mode)
- writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
- i2c->regs + MXS_I2C_QUEUECTRL_CLR);
- else
- writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
- i2c->regs + MXS_I2C_QUEUECTRL_SET);
-}
-
-static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len,
- int flags)
-{
- u32 data;
-
- writel(MXS_CMD_I2C_SELECT, i2c->regs + MXS_I2C_QUEUECMD);
-
- data = (addr << 1) | I2C_SMBUS_READ;
- writel(data, i2c->regs + MXS_I2C_DATA);
-
- data = MXS_CMD_I2C_READ | MXS_I2C_CTRL0_XFER_COUNT(len) | flags;
- writel(data, i2c->regs + MXS_I2C_QUEUECMD);
-}
-
-static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c,
- u8 addr, u8 *buf, int len, int flags)
-{
- u32 data;
- int i, shifts_left;
-
- data = MXS_CMD_I2C_WRITE | MXS_I2C_CTRL0_XFER_COUNT(len + 1) | flags;
- writel(data, i2c->regs + MXS_I2C_QUEUECMD);
-
- /*
- * We have to copy the slave address (u8) and buffer (arbitrary number
- * of u8) into the data register (u32). To achieve that, the u8 are put
- * into the MSBs of 'data' which is then shifted for the next u8. When
- * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32
- * looks like this:
- *
- * 3 2 1 0
- * 10987654|32109876|54321098|76543210
- * --------+--------+--------+--------
- * buffer+2|buffer+1|buffer+0|slave_addr
- */
-
- data = ((addr << 1) | I2C_SMBUS_WRITE) << 24;
-
- for (i = 0; i < len; i++) {
- data >>= 8;
- data |= buf[i] << 24;
- if ((i & 3) == 2)
- writel(data, i2c->regs + MXS_I2C_DATA);
- }
-
- /* Write out the remaining bytes if any */
- shifts_left = 24 - (i & 3) * 8;
- if (shifts_left)
- writel(data >> shifts_left, i2c->regs + MXS_I2C_DATA);
-}
-
-/*
- * TODO: should be replaceable with a waitqueue and RD_QUEUE_IRQ (setting the
- * rd_threshold to 1). Couldn't get this to work, though.
- */
-static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(1000);
-
- while (readl(i2c->regs + MXS_I2C_QUEUESTAT)
- & MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY) {
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
- cond_resched();
- }
-
- return 0;
-}
-
-static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len)
-{
- u32 uninitialized_var(data);
- int i;
-
- for (i = 0; i < len; i++) {
- if ((i & 3) == 0) {
- if (mxs_i2c_wait_for_data(i2c))
- return -ETIMEDOUT;
- data = readl(i2c->regs + MXS_I2C_QUEUEDATA);
- }
- buf[i] = data & 0xff;
- data >>= 8;
- }
-
- return 0;
}
static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c)
init_completion(&i2c->cmd_complete);
i2c->cmd_err = 0;
- if (i2c->dma_mode) {
- ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
- if (ret)
- return ret;
- } else {
- if (msg->flags & I2C_M_RD) {
- mxs_i2c_pioq_setup_read(i2c, msg->addr,
- msg->len, flags);
- } else {
- mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf,
- msg->len, flags);
- }
-
- writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
- i2c->regs + MXS_I2C_QUEUECTRL_SET);
- }
+ ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
+ if (ret)
+ return ret;
ret = wait_for_completion_timeout(&i2c->cmd_complete,
msecs_to_jiffies(1000));
if (ret == 0)
goto timeout;
- if (!i2c->dma_mode && !i2c->cmd_err && (msg->flags & I2C_M_RD)) {
- ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len);
- if (ret)
- goto timeout;
- }
-
if (i2c->cmd_err == -ENXIO)
mxs_i2c_reset(i2c);
- else
- writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
- i2c->regs + MXS_I2C_QUEUECTRL_CLR);
dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err);
timeout:
dev_dbg(i2c->dev, "Timeout!\n");
- if (i2c->dma_mode)
- mxs_i2c_dma_finish(i2c);
+ mxs_i2c_dma_finish(i2c);
mxs_i2c_reset(i2c);
return -ETIMEDOUT;
}
{
struct mxs_i2c_dev *i2c = dev_id;
u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK;
- bool is_last_cmd;
if (!stat)
return IRQ_NONE;
/* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */
i2c->cmd_err = -EIO;
- if (!i2c->dma_mode) {
- is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
- MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
-
- if (is_last_cmd || i2c->cmd_err)
- complete(&i2c->cmd_complete);
- }
-
writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
return IRQ_HANDLED;
struct device_node *node = dev->of_node;
int ret;
- /*
- * The MXS I2C DMA mode is prefered and enabled by default.
- * The PIO mode is still supported, but should be used only
- * for debuging purposes etc.
- */
- i2c->dma_mode = !use_pioqueue;
- if (!i2c->dma_mode)
- dev_info(dev, "Using PIOQUEUE mode for I2C transfers!\n");
-
/*
* TODO: This is a temporary solution and should be changed
* to use generic DMA binding later when the helpers get in.
ret = of_property_read_u32(node, "fsl,i2c-dma-channel",
&i2c->dma_channel);
if (ret) {
- dev_warn(dev, "Failed to get DMA channel, using PIOQUEUE!\n");
- i2c->dma_mode = 0;
+ dev_err(dev, "Failed to get DMA channel!\n");
+ return -ENODEV;
}
ret = of_property_read_u32(node, "clock-frequency", &speed);
}
/* Setup the DMA */
- if (i2c->dma_mode) {
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- i2c->dma_data.chan_irq = dmairq;
- i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
- if (!i2c->dmach) {
- dev_err(dev, "Failed to request dma\n");
- return -ENODEV;
- }
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ i2c->dma_data.chan_irq = dmairq;
+ i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
+ if (!i2c->dmach) {
+ dev_err(dev, "Failed to request dma\n");
+ return -ENODEV;
}
platform_set_drvdata(pdev, i2c);
pm_runtime_get_sync(&dev->adev->dev);
- clk_enable(dev->clk);
+ status = clk_prepare_enable(dev->clk);
+ if (status) {
+ dev_err(&dev->adev->dev, "can't prepare_enable clock\n");
+ goto out_clk;
+ }
status = init_hw(dev);
if (status)
}
out:
- clk_disable(dev->clk);
+ clk_disable_unprepare(dev->clk);
+out_clk:
pm_runtime_put_sync(&dev->adev->dev);
dev->busy = false;
}
ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
- tegra_i2c_isr, 0, pdev->name, i2c_dev);
+ tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
return ret;
i2c-stub.c - I2C/SMBus chip emulator
Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
- Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2007, 2012 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
static struct stub_chip *stub_chips;
/* Return negative errno on error. */
-static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
- char read_write, u8 command, int size, union i2c_smbus_data * data)
+static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags,
+ char read_write, u8 command, int size, union i2c_smbus_data *data)
{
s32 ret;
int i, len;
case I2C_SMBUS_BYTE:
if (read_write == I2C_SMBUS_WRITE) {
chip->pointer = command;
- dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
- "wrote 0x%02x.\n",
- addr, command);
+ dev_dbg(&adap->dev,
+ "smbus byte - addr 0x%02x, wrote 0x%02x.\n",
+ addr, command);
} else {
data->byte = chip->words[chip->pointer++] & 0xff;
- dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
- "read 0x%02x.\n",
- addr, data->byte);
+ dev_dbg(&adap->dev,
+ "smbus byte - addr 0x%02x, read 0x%02x.\n",
+ addr, data->byte);
}
ret = 0;
if (read_write == I2C_SMBUS_WRITE) {
chip->words[command] &= 0xff00;
chip->words[command] |= data->byte;
- dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
- "wrote 0x%02x at 0x%02x.\n",
- addr, data->byte, command);
+ dev_dbg(&adap->dev,
+ "smbus byte data - addr 0x%02x, wrote 0x%02x at 0x%02x.\n",
+ addr, data->byte, command);
} else {
data->byte = chip->words[command] & 0xff;
- dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
- "read 0x%02x at 0x%02x.\n",
- addr, data->byte, command);
+ dev_dbg(&adap->dev,
+ "smbus byte data - addr 0x%02x, read 0x%02x at 0x%02x.\n",
+ addr, data->byte, command);
}
chip->pointer = command + 1;
case I2C_SMBUS_WORD_DATA:
if (read_write == I2C_SMBUS_WRITE) {
chip->words[command] = data->word;
- dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
- "wrote 0x%04x at 0x%02x.\n",
- addr, data->word, command);
+ dev_dbg(&adap->dev,
+ "smbus word data - addr 0x%02x, wrote 0x%04x at 0x%02x.\n",
+ addr, data->word, command);
} else {
data->word = chip->words[command];
- dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
- "read 0x%04x at 0x%02x.\n",
- addr, data->word, command);
+ dev_dbg(&adap->dev,
+ "smbus word data - addr 0x%02x, read 0x%04x at 0x%02x.\n",
+ addr, data->word, command);
}
ret = 0;
chip->words[command + i] &= 0xff00;
chip->words[command + i] |= data->block[1 + i];
}
- dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
- "wrote %d bytes at 0x%02x.\n",
- addr, len, command);
+ dev_dbg(&adap->dev,
+ "i2c block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n",
+ addr, len, command);
} else {
for (i = 0; i < len; i++) {
data->block[1 + i] =
chip->words[command + i] & 0xff;
}
- dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
- "read %d bytes at 0x%02x.\n",
- addr, len, command);
+ dev_dbg(&adap->dev,
+ "i2c block data - addr 0x%02x, read %d bytes at 0x%02x.\n",
+ addr, len, command);
}
ret = 0;
int i, ret;
if (!chip_addr[0]) {
- printk(KERN_ERR "i2c-stub: Please specify a chip address\n");
+ pr_err("i2c-stub: Please specify a chip address\n");
return -ENODEV;
}
for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) {
- printk(KERN_ERR "i2c-stub: Invalid chip address "
- "0x%02x\n", chip_addr[i]);
+ pr_err("i2c-stub: Invalid chip address 0x%02x\n",
+ chip_addr[i]);
return -EINVAL;
}
- printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n",
- chip_addr[i]);
+ pr_info("i2c-stub: Virtual chip at 0x%02x\n", chip_addr[i]);
}
/* Allocate memory for all chips at once */
stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL);
if (!stub_chips) {
- printk(KERN_ERR "i2c-stub: Out of memory\n");
+ pr_err("i2c-stub: Out of memory\n");
return -ENOMEM;
}
module_init(i2c_stub_init);
module_exit(i2c_stub_exit);
-
config KEYBOARD_LPC32XX
tristate "LPC32XX matrix key scanner support"
depends on ARCH_LPC32XX && OF
+ select INPUT_MATRIXKMAP
help
Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
connected to a key matrix.
unsigned int mask = 0, direct_key_num = 0;
unsigned long kpc = 0;
+ /* clear pending interrupt bit */
+ keypad_readl(KPC);
+
/* enable matrix keys with automatic scan */
if (pdata->matrix_key_rows && pdata->matrix_key_cols) {
kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL;
case XenbusStateReconfiguring:
case XenbusStateReconfigured:
case XenbusStateUnknown:
- case XenbusStateClosed:
break;
case XenbusStateInitWait:
break;
+ case XenbusStateClosed:
+ if (dev->state == XenbusStateClosed)
+ break;
+ /* Missed the backend's CLOSING state -- fallthrough */
case XenbusStateClosing:
xenbus_frontend_closed(dev);
break;
#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262
#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263
#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264
+/* MacbookPro10,2 (unibody, October 2012) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
+ /* MacbookPro10,2 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
/* Terminating entry */
{}
};
{ SN_COORD, -150, 6730 },
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { SN_PRESSURE, 0, 300 },
+ { SN_WIDTH, 0, 2048 },
+ { SN_COORD, -4750, 5280 },
+ { SN_COORD, -150, 6730 },
+ { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
+ },
{}
};
features->pktlen = WACOM_PKGLEN_TPC2FG;
}
- if (features->type == MTSCREEN || WACOM_24HDT)
+ if (features->type == MTSCREEN || features->type == WACOM_24HDT)
features->pktlen = WACOM_PKGLEN_MTOUCH;
if (features->type == BAMBOO_PT) {
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
+
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
wacom_setup_cintiq(wacom_wac);
break;
config TOUCHSCREEN_EGALAX
tristate "EETI eGalax multi-touch panel support"
- depends on I2C
+ depends on I2C && OF
help
Say Y here to enable support for I2C connected EETI
eGalax multi-touch panels.
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/input/mt.h>
+#include <linux/of_gpio.h>
/*
* Mouse Mode: some panel may configure the controller to mouse mode,
/* wake up controller by an falling edge of interrupt gpio. */
static int egalax_wake_up_device(struct i2c_client *client)
{
- int gpio = irq_to_gpio(client->irq);
+ struct device_node *np = client->dev.of_node;
+ int gpio;
int ret;
+ if (!np)
+ return -ENODEV;
+
+ gpio = of_get_named_gpio(np, "wakeup-gpios", 0);
+ if (!gpio_is_valid(gpio))
+ return -ENODEV;
+
ret = gpio_request(gpio, "egalax_irq");
if (ret < 0) {
dev_err(&client->dev,
ts->input_dev = input_dev;
/* controller may be in sleep, wake it up. */
- egalax_wake_up_device(client);
+ error = egalax_wake_up_device(client);
+ if (error) {
+ dev_err(&client->dev, "Failed to wake up the controller\n");
+ goto err_free_dev;
+ }
ret = egalax_firmware_version(client);
if (ret < 0) {
static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
+static struct of_device_id egalax_ts_dt_ids[] = {
+ { .compatible = "eeti,egalax_ts" },
+ { /* sentinel */ }
+};
+
static struct i2c_driver egalax_ts_driver = {
.driver = {
.name = "egalax_ts",
.owner = THIS_MODULE,
.pm = &egalax_ts_pm_ops,
+ .of_match_table = of_match_ptr(egalax_ts_dt_ids),
},
.id_table = egalax_ts_id,
.probe = egalax_ts_probe,
__set_bit(BTN_TOUCH, input_dev->keybit);
input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0);
input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0);
- input_set_abs_params(ptsc->dev, ABS_PRESSURE, 0, 0, 0, 0);
serio_set_drvdata(serio, ptsc);
menuconfig ISDN
bool "ISDN support"
- depends on NET
+ depends on NET && NETDEVICES
depends on !S390 && !UML
---help---
ISDN ("Integrated Services Digital Network", called RNIS in France)
config ISDN_PPP
bool "Support synchronous PPP"
- depends on INET && NETDEVICES
+ depends on INET
select SLHC
help
Over digital connections such as ISDN, there is no need to
} else
return -EINVAL;
break;
-#ifdef CONFIG_NETDEVICES
case IIOCNETGPN:
/* Get peer phone number of a connected
* isdn network interface */
return isdn_net_getpeer(&phone, argp);
} else
return -EINVAL;
-#endif
default:
return -EINVAL;
}
case IIOCNETLCR:
printk(KERN_INFO "INFO: ISDN_ABC_LCR_SUPPORT not enabled\n");
return -ENODEV;
-#ifdef CONFIG_NETDEVICES
case IIOCNETAIF:
/* Add a network-interface */
if (arg) {
return -EFAULT;
return isdn_net_force_hangup(name);
break;
-#endif /* CONFIG_NETDEVICES */
case IIOCSETVER:
dev->net_verbose = arg;
printk(KERN_INFO "isdn: Verbose-Level is %d\n", dev->net_verbose);
}
conf->nfaults = 0;
- rdev_for_each(rdev, mddev)
+ rdev_for_each(rdev, mddev) {
conf->rdev = rdev;
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
+ }
md_set_array_sectors(mddev, faulty_size(mddev, 0, 0));
mddev->private = conf;
|| disk_idx < 0)
continue;
if (test_bit(Replacement, &rdev->flags))
- disk = conf->mirrors + conf->raid_disks + disk_idx;
+ disk = conf->mirrors + mddev->raid_disks + disk_idx;
else
disk = conf->mirrors + disk_idx;
clear_bit(Unmerged, &rdev->flags);
}
md_integrity_add_rdev(rdev, mddev);
- if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
+ if (mddev->queue && blk_queue_discard(bdev_get_queue(rdev->bdev)))
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
print_conf(conf);
discard_supported = true;
}
- if (discard_supported)
- queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
- else
- queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
-
+ if (mddev->queue) {
+ if (discard_supported)
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD,
+ mddev->queue);
+ else
+ queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD,
+ mddev->queue);
+ }
/* need to check that every block has at least one working mirror */
if (!enough(conf, -1)) {
printk(KERN_ERR "md/raid10:%s: not enough operational mirrors.\n",
#include <media/v4l2-ioctl.h>
#include <plat/cpu.h>
-#include <plat/dma.h>
-#include <plat/vrfb.h>
+#include <plat-omap/dma-omap.h>
+#include <video/omapvrfb.h>
#include <video/omapdss.h>
#include "omap_voutlib.h"
#include <media/videobuf-dma-contig.h>
#include <media/v4l2-device.h>
-#include <plat/dma.h>
-#include <plat/vrfb.h>
+#include <plat-omap/dma-omap.h>
+#include <video/omapvrfb.h>
#include "omap_voutdef.h"
#include "omap_voutlib.h"
+#define OMAP_DMA_NO_DEVICE 0
+
/*
* Function for allocating video buffers
*/
#define OMAP_VOUTDEF_H
#include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
#define YUYV_BPP 2
#define RGB565_BPP 2
#include "ispreg.h"
#include "isphist.h"
+#define OMAP24XX_DMA_NO_DEVICE 0
+
#define HIST_CONFIG_DMA 1
#define HIST_USING_DMA(hist) ((hist)->dma_ch >= 0)
#include <linux/types.h>
#include <linux/omap3isp.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <media/v4l2-event.h>
#include "isp.h"
#include <media/v4l2-ioctl.h>
#include <plat/iommu.h>
#include <plat/iovmm.h>
-#include <plat/omap-pm.h>
#include "ispvideo.h"
#include "isp.h"
#include <linux/videodev2.h>
#include <linux/platform_data/camera-mx2.h>
-#include <mach/hardware.h>
#include <asm/dma.h>
#define CSICR1 0x00
#define CSICR2 0x04
-#define CSISR (cpu_is_mx27() ? 0x08 : 0x18)
+#define CSISR_IMX25 0x18
+#define CSISR_IMX27 0x08
#define CSISTATFIFO 0x0c
#define CSIRFIFO 0x10
#define CSIRXCNT 0x14
-#define CSICR3 (cpu_is_mx27() ? 0x1C : 0x08)
+#define CSICR3_IMX25 0x08
+#define CSICR3_IMX27 0x1c
#define CSIDMASA_STATFIFO 0x20
#define CSIDMATA_STATFIFO 0x24
#define CSIDMASA_FB1 0x28
struct mx2_buf_internal internal;
};
+enum mx2_camera_type {
+ IMX25_CAMERA,
+ IMX27_CAMERA,
+};
+
struct mx2_camera_dev {
struct device *dev;
struct soc_camera_host soc_host;
struct mx2_buffer *fb2_active;
u32 csicr1;
+ u32 reg_csisr;
+ u32 reg_csicr3;
+ enum mx2_camera_type devtype;
struct mx2_buf_internal buf_discard[2];
void *discard_buffer;
struct vb2_alloc_ctx *alloc_ctx;
};
+static struct platform_device_id mx2_camera_devtype[] = {
+ {
+ .name = "imx25-camera",
+ .driver_data = IMX25_CAMERA,
+ }, {
+ .name = "imx27-camera",
+ .driver_data = IMX27_CAMERA,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mx2_camera_devtype);
+
+static inline int is_imx25_camera(struct mx2_camera_dev *pcdev)
+{
+ return pcdev->devtype == IMX25_CAMERA;
+}
+
+static inline int is_imx27_camera(struct mx2_camera_dev *pcdev)
+{
+ return pcdev->devtype == IMX27_CAMERA;
+}
+
static struct mx2_buffer *mx2_ibuf_to_buf(struct mx2_buf_internal *int_buf)
{
return container_of(int_buf, struct mx2_buffer, internal);
clk_disable_unprepare(pcdev->clk_csi);
writel(0, pcdev->base_csi + CSICR1);
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
writel(0, pcdev->base_emma + PRP_CNTL);
- } else if (cpu_is_mx25()) {
+ } else if (is_imx25_camera(pcdev)) {
spin_lock_irqsave(&pcdev->lock, flags);
pcdev->fb1_active = NULL;
pcdev->fb2_active = NULL;
csicr1 = CSICR1_MCLKEN;
- if (cpu_is_mx27())
+ if (is_imx27_camera(pcdev))
csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC |
CSICR1_RXFF_LEVEL(0);
static irqreturn_t mx25_camera_irq(int irq_csi, void *data)
{
struct mx2_camera_dev *pcdev = data;
- u32 status = readl(pcdev->base_csi + CSISR);
+ u32 status = readl(pcdev->base_csi + pcdev->reg_csisr);
if (status & CSISR_DMA_TSF_FB1_INT)
mx25_camera_frame_done(pcdev, 1, MX2_STATE_DONE);
/* FIXME: handle CSISR_RFF_OR_INT */
- writel(status, pcdev->base_csi + CSISR);
+ writel(status, pcdev->base_csi + pcdev->reg_csisr);
return IRQ_HANDLED;
}
buf->state = MX2_STATE_QUEUED;
list_add_tail(&buf->internal.queue, &pcdev->capture);
- if (cpu_is_mx25()) {
+ if (is_imx25_camera(pcdev)) {
u32 csicr3, dma_inten = 0;
if (pcdev->fb1_active == NULL) {
list_del(&buf->internal.queue);
buf->state = MX2_STATE_ACTIVE;
- csicr3 = readl(pcdev->base_csi + CSICR3);
+ csicr3 = readl(pcdev->base_csi + pcdev->reg_csicr3);
/* Reflash DMA */
writel(csicr3 | CSICR3_DMA_REFLASH_RFF,
- pcdev->base_csi + CSICR3);
+ pcdev->base_csi + pcdev->reg_csicr3);
/* clear & enable interrupts */
- writel(dma_inten, pcdev->base_csi + CSISR);
+ writel(dma_inten, pcdev->base_csi + pcdev->reg_csisr);
pcdev->csicr1 |= dma_inten;
writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
/* enable DMA */
csicr3 |= CSICR3_DMA_REQ_EN_RFF | CSICR3_RXFF_LEVEL(1);
- writel(csicr3, pcdev->base_csi + CSICR3);
+ writel(csicr3, pcdev->base_csi + pcdev->reg_csicr3);
}
}
*/
spin_lock_irqsave(&pcdev->lock, flags);
- if (cpu_is_mx25() && buf->state == MX2_STATE_ACTIVE) {
+ if (is_imx25_camera(pcdev) && buf->state == MX2_STATE_ACTIVE) {
if (pcdev->fb1_active == buf) {
pcdev->csicr1 &= ~CSICR1_FB1_DMA_INTEN;
writel(0, pcdev->base_csi + CSIDMASA_FB1);
unsigned long phys;
int bytesperline;
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
unsigned long flags;
if (count < 2)
return -EINVAL;
void *b;
u32 cntl;
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
spin_lock_irqsave(&pcdev->lock, flags);
cntl = readl(pcdev->base_emma + PRP_CNTL);
if (bytesperline < 0)
return bytesperline;
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
ret = mx27_camera_emma_prp_reset(pcdev);
if (ret)
return ret;
- } else if (cpu_is_mx25()) {
+ } else if (is_imx25_camera(pcdev)) {
writel((bytesperline * icd->user_height) >> 2,
pcdev->base_csi + CSIRXCNT);
writel((bytesperline << 16) | icd->user_height,
/* FIXME: implement MX27 limits */
/* limit to MX25 hardware capabilities */
- if (cpu_is_mx25()) {
+ if (is_imx25_camera(pcdev)) {
if (xlate->host_fmt->bits_per_sample <= 8)
width_limit = 0xffff * 4;
else
goto exit;
}
+ pcdev->devtype = pdev->id_entry->driver_data;
+ switch (pcdev->devtype) {
+ case IMX25_CAMERA:
+ pcdev->reg_csisr = CSISR_IMX25;
+ pcdev->reg_csicr3 = CSICR3_IMX25;
+ break;
+ case IMX27_CAMERA:
+ pcdev->reg_csisr = CSISR_IMX27;
+ pcdev->reg_csicr3 = CSICR3_IMX27;
+ break;
+ default:
+ break;
+ }
+
pcdev->clk_csi = devm_clk_get(&pdev->dev, "ahb");
if (IS_ERR(pcdev->clk_csi)) {
dev_err(&pdev->dev, "Could not get csi clock\n");
pcdev->dev = &pdev->dev;
platform_set_drvdata(pdev, pcdev);
- if (cpu_is_mx25()) {
+ if (is_imx25_camera(pcdev)) {
err = devm_request_irq(&pdev->dev, irq_csi, mx25_camera_irq, 0,
MX2_CAM_DRV_NAME, pcdev);
if (err) {
}
}
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
err = mx27_camera_emma_init(pdev);
if (err)
goto exit;
pcdev->soc_host.priv = pcdev;
pcdev->soc_host.v4l2_dev.dev = &pdev->dev;
pcdev->soc_host.nr = pdev->id;
- if (cpu_is_mx25())
+ if (is_imx25_camera(pcdev))
pcdev->soc_host.capabilities = SOCAM_HOST_CAP_STRIDE;
pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
exit_free_emma:
vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx);
eallocctx:
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
clk_disable_unprepare(pcdev->clk_emma_ipg);
clk_disable_unprepare(pcdev->clk_emma_ahb);
}
vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx);
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
clk_disable_unprepare(pcdev->clk_emma_ipg);
clk_disable_unprepare(pcdev->clk_emma_ahb);
}
.driver = {
.name = MX2_CAM_DRV_NAME,
},
+ .id_table = mx2_camera_devtype,
.remove = __devexit_p(mx2_camera_remove),
};
#include <linux/vmalloc.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/dma/ipu-dma.h>
#include <media/v4l2-common.h>
#include <media/v4l2-dev.h>
#include <media/soc_camera.h>
#include <media/soc_mediabus.h>
-#include <mach/ipu.h>
#include <linux/platform_data/camera-mx3.h>
#include <linux/platform_data/dma-imx.h>
#include <media/videobuf-dma-contig.h>
#include <media/videobuf-dma-sg.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#define DRIVER_NAME "omap1-camera"
#define DRIVER_VERSION "0.0.2"
+#define OMAP_DMA_CAMERA_IF_RX 20
/*
* ---------------------------------------------------------------------------
#include <plat/dmtimer.h>
#include <plat/clock.h>
-#include <plat/omap-pm.h>
#include <media/lirc.h>
#include <media/lirc_dev.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/slab.h>
+#include <linux/mfd/menelaus.h>
#include <asm/mach/irq.h>
#include <asm/gpio.h>
-#include <plat/menelaus.h>
#define DRIVER_NAME "menelaus"
#include <linux/spinlock.h>
#include <linux/gpio.h>
#include <plat/cpu.h>
-#include <plat/usb.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap.h>
#include <linux/pm_runtime.h>
+#include "omap-usb.h"
+
#define USBHS_DRIVER_NAME "usbhs_omap"
#define OMAP_EHCI_DEVICE "ehci-omap"
#define OMAP_OHCI_DEVICE "ohci-omap3"
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
-#include <plat/usb.h>
#include <linux/pm_runtime.h>
+#include <linux/platform_data/usb-omap.h>
#define USBTLL_DRIVER_NAME "usbhs_tll"
--- /dev/null
+extern int omap_tll_enable(void);
+extern int omap_tll_disable(void);
MMC_CAP_CMD23,
};
-static struct dw_mci_drv_data exynos5250_drv_data = {
+static const struct dw_mci_drv_data exynos5250_drv_data = {
.caps = exynos5250_dwmmc_caps,
.init = dw_mci_exynos_priv_init,
.setup_clock = dw_mci_exynos_setup_clock,
static const struct of_device_id dw_mci_exynos_match[] = {
{ .compatible = "samsung,exynos5250-dw-mshc",
- .data = (void *)&exynos5250_drv_data, },
+ .data = &exynos5250_drv_data, },
{},
};
-MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
+MODULE_DEVICE_TABLE(of, dw_mci_exynos_match);
int dw_mci_exynos_probe(struct platform_device *pdev)
{
- struct dw_mci_drv_data *drv_data;
+ const struct dw_mci_drv_data *drv_data;
const struct of_device_id *match;
match = of_match_node(dw_mci_exynos_match, pdev->dev.of_node);
#include "dw_mmc.h"
int dw_mci_pltfm_register(struct platform_device *pdev,
- struct dw_mci_drv_data *drv_data)
+ const struct dw_mci_drv_data *drv_data)
{
struct dw_mci *host;
struct resource *regs;
if (!host->regs)
return -ENOMEM;
- if (host->drv_data->init) {
- ret = host->drv_data->init(host);
+ if (drv_data && drv_data->init) {
+ ret = drv_data->init(host);
if (ret)
return ret;
}
#define _DW_MMC_PLTFM_H_
extern int dw_mci_pltfm_register(struct platform_device *pdev,
- struct dw_mci_drv_data *drv_data);
+ const struct dw_mci_drv_data *drv_data);
extern int __devexit dw_mci_pltfm_remove(struct platform_device *pdev);
extern const struct dev_pm_ops dw_mci_pltfm_pmops;
{
struct mmc_data *data;
struct dw_mci_slot *slot = mmc_priv(mmc);
+ struct dw_mci_drv_data *drv_data = slot->host->drv_data;
u32 cmdr;
cmd->error = -EINPROGRESS;
cmdr |= SDMMC_CMD_DAT_WR;
}
- if (slot->host->drv_data->prepare_command)
- slot->host->drv_data->prepare_command(slot->host, &cmdr);
+ if (drv_data && drv_data->prepare_command)
+ drv_data->prepare_command(slot->host, &cmdr);
return cmdr;
}
return 0;
}
-static struct dw_mci_dma_ops dw_mci_idmac_ops = {
+static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
.init = dw_mci_idmac_init,
.start = dw_mci_idmac_start_dma,
.stop = dw_mci_idmac_stop_dma,
static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
+ struct dw_mci_drv_data *drv_data = slot->host->drv_data;
u32 regs;
/* set default 1 bit mode */
slot->clock = ios->clock;
}
- if (slot->host->drv_data->set_ios)
- slot->host->drv_data->set_ios(slot->host, ios);
+ if (drv_data && drv_data->set_ios)
+ drv_data->set_ios(slot->host, ios);
switch (ios->power_mode) {
case MMC_POWER_UP:
{
struct mmc_host *mmc;
struct dw_mci_slot *slot;
+ struct dw_mci_drv_data *drv_data = host->drv_data;
int ctrl_id, ret;
u8 bus_width;
} else {
ctrl_id = to_platform_device(host->dev)->id;
}
- if (host->drv_data && host->drv_data->caps)
- mmc->caps |= host->drv_data->caps[ctrl_id];
+ if (drv_data && drv_data->caps)
+ mmc->caps |= drv_data->caps[ctrl_id];
if (host->pdata->caps2)
mmc->caps2 = host->pdata->caps2;
else
bus_width = 1;
- if (host->drv_data->setup_bus) {
+ if (drv_data && drv_data->setup_bus) {
struct device_node *slot_np;
slot_np = dw_mci_of_find_slot_node(host->dev, slot->id);
- ret = host->drv_data->setup_bus(host, slot_np, bus_width);
+ ret = drv_data->setup_bus(host, slot_np, bus_width);
if (ret)
goto err_setup_bus;
}
/* Determine which DMA interface to use */
#ifdef CONFIG_MMC_DW_IDMAC
host->dma_ops = &dw_mci_idmac_ops;
- dev_info(&host->dev, "Using internal DMA controller.\n");
+ dev_info(host->dev, "Using internal DMA controller.\n");
#endif
if (!host->dma_ops)
struct dw_mci_board *pdata;
struct device *dev = host->dev;
struct device_node *np = dev->of_node;
+ struct dw_mci_drv_data *drv_data = host->drv_data;
int idx, ret;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
- if (host->drv_data->parse_dt) {
- ret = host->drv_data->parse_dt(host);
+ if (drv_data && drv_data->parse_dt) {
+ ret = drv_data->parse_dt(host);
if (ret)
return ERR_PTR(ret);
}
int dw_mci_probe(struct dw_mci *host)
{
+ struct dw_mci_drv_data *drv_data = host->drv_data;
int width, i, ret = 0;
u32 fifo_size;
int init_slots = 0;
else
host->bus_hz = clk_get_rate(host->ciu_clk);
- if (host->drv_data->setup_clock) {
- ret = host->drv_data->setup_clock(host);
+ if (drv_data && drv_data->setup_clock) {
+ ret = drv_data->setup_clock(host);
if (ret) {
dev_err(host->dev,
"implementation specific clock setup failed\n");
else
host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1;
+ /*
+ * Enable interrupts for command done, data over, data empty, card det,
+ * receive ready and error such as transmit, receive timeout, crc error
+ */
+ mci_writel(host, RINTSTS, 0xFFFFFFFF);
+ mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
+ SDMMC_INT_TXDR | SDMMC_INT_RXDR |
+ DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
+ mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
+
+ dev_info(host->dev, "DW MMC controller at irq %d, "
+ "%d bit host data width, "
+ "%u deep fifo\n",
+ host->irq, width, fifo_size);
+
/* We need at least one slot to succeed */
for (i = 0; i < host->num_slots; i++) {
ret = dw_mci_init_slot(host, i);
else
host->data_offset = DATA_240A_OFFSET;
- /*
- * Enable interrupts for command done, data over, data empty, card det,
- * receive ready and error such as transmit, receive timeout, crc error
- */
- mci_writel(host, RINTSTS, 0xFFFFFFFF);
- mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
- SDMMC_INT_TXDR | SDMMC_INT_RXDR |
- DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
- mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
-
- dev_info(host->dev, "DW MMC controller at irq %d, "
- "%d bit host data width, "
- "%u deep fifo\n",
- host->irq, width, fifo_size);
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
#include <linux/platform_data/mmc-mxcmmc.h>
#include <linux/platform_data/dma-imx.h>
-#include <mach/hardware.h>
#define DRIVER_NAME "mxc-mmc"
#define MXCMCI_TIMEOUT_MS 10000
#define INT_WRITE_OP_DONE_EN (1 << 1)
#define INT_READ_OP_EN (1 << 0)
+enum mxcmci_type {
+ IMX21_MMC,
+ IMX31_MMC,
+};
+
struct mxcmci_host {
struct mmc_host *mmc;
struct resource *res;
struct imx_dma_data dma_data;
struct timer_list watchdog;
+ enum mxcmci_type devtype;
+};
+
+static struct platform_device_id mxcmci_devtype[] = {
+ {
+ .name = "imx21-mmc",
+ .driver_data = IMX21_MMC,
+ }, {
+ .name = "imx31-mmc",
+ .driver_data = IMX31_MMC,
+ }, {
+ /* sentinel */
+ }
};
+MODULE_DEVICE_TABLE(platform, mxcmci_devtype);
+
+static inline int is_imx31_mmc(struct mxcmci_host *host)
+{
+ return host->devtype == IMX31_MMC;
+}
static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
static void mxcmci_init_card(struct mmc_host *host, struct mmc_card *card)
{
+ struct mxcmci_host *mxcmci = mmc_priv(host);
+
/*
* MX3 SoCs have a silicon bug which corrupts CRC calculation of
* multi-block transfers when connected SDIO peripheral doesn't
* One way to prevent this is to only allow 1-bit transfers.
*/
- if (cpu_is_mx3() && card->type == MMC_TYPE_SDIO)
+ if (is_imx31_mmc(mxcmci) && card->type == MMC_TYPE_SDIO)
host->caps &= ~MMC_CAP_4_BIT_DATA;
else
host->caps |= MMC_CAP_4_BIT_DATA;
host->mmc = mmc;
host->pdata = pdev->dev.platform_data;
+ host->devtype = pdev->id_entry->driver_data;
spin_lock_init(&host->lock);
mxcmci_init_ocr(host);
static struct platform_driver mxcmci_driver = {
.probe = mxcmci_probe,
.remove = mxcmci_remove,
+ .id_table = mxcmci_devtype,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver");
MODULE_AUTHOR("Sascha Hauer, Pengutronix");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:imx-mmc");
+MODULE_ALIAS("platform:mxc-mmc");
#include <linux/clk.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
+#include <linux/platform_data/mmc-omap.h>
-#include <plat/mmc.h>
-#include <plat/dma.h>
#define OMAP_MMC_REG_CMD 0x00
#define OMAP_MMC_REG_ARGL 0x01
#define OMAP_MMC_STAT_CARD_BUSY (1 << 2)
#define OMAP_MMC_STAT_END_OF_CMD (1 << 0)
+#define mmc_omap7xx() (host->features & MMC_OMAP7XX)
+#define mmc_omap15xx() (host->features & MMC_OMAP15XX)
+#define mmc_omap16xx() (host->features & MMC_OMAP16XX)
+#define MMC_OMAP1_MASK (MMC_OMAP7XX | MMC_OMAP15XX | MMC_OMAP16XX)
+#define mmc_omap1() (host->features & MMC_OMAP1_MASK)
+#define mmc_omap2() (!mmc_omap1())
+
#define OMAP_MMC_REG(host, reg) (OMAP_MMC_REG_##reg << (host)->reg_shift)
#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
#define OMAP_MMC_CMDTYPE_AC 2
#define OMAP_MMC_CMDTYPE_ADTC 3
+#define OMAP_DMA_MMC_TX 21
+#define OMAP_DMA_MMC_RX 22
+#define OMAP_DMA_MMC2_TX 54
+#define OMAP_DMA_MMC2_RX 55
+
+#define OMAP24XX_DMA_MMC2_TX 47
+#define OMAP24XX_DMA_MMC2_RX 48
+#define OMAP24XX_DMA_MMC1_TX 61
+#define OMAP24XX_DMA_MMC1_RX 62
+
#define DRIVER_NAME "mmci-omap"
u32 buffer_bytes_left;
u32 total_bytes_left;
+ unsigned features;
unsigned use_dma:1;
unsigned brs_received:1, dma_done:1;
unsigned dma_in_use:1;
* blocksize is at least that large. Blocksize is
* usually 512 bytes; but not for some SD reads.
*/
- burst = cpu_is_omap15xx() ? 32 : 64;
+ burst = mmc_omap15xx() ? 32 : 64;
if (burst > data->blksz)
burst = data->blksz;
if (slot->pdata->set_power != NULL)
slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on,
vdd);
-
- if (cpu_is_omap24xx()) {
+ if (mmc_omap2()) {
u16 w;
if (power_on) {
mmc->ops = &mmc_omap_ops;
mmc->f_min = 400000;
- if (cpu_class_is_omap2())
+ if (mmc_omap2())
mmc->f_max = 48000000;
else
mmc->f_max = 24000000;
init_waitqueue_head(&host->slot_wq);
host->pdata = pdata;
+ host->features = host->pdata->slots[0].features;
host->dev = &pdev->dev;
platform_set_drvdata(pdev, host);
host->dma_tx_burst = -1;
host->dma_rx_burst = -1;
- if (cpu_is_omap24xx())
+ if (mmc_omap2())
sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX;
else
sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX;
dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n",
sig);
#endif
- if (cpu_is_omap24xx())
+ if (mmc_omap2())
sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX;
else
sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX;
}
host->nr_slots = pdata->nr_slots;
- host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+ host->reg_shift = (mmc_omap7xx() ? 1 : 2);
host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
if (!host->mmc_omap_wq)
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
-#include <mach/hardware.h>
-#include <plat/mmc.h>
-#include <plat/cpu.h>
+#include <linux/platform_data/mmc-omap.h>
/* OMAP HSMMC Host Controller Registers */
#define OMAP_HSMMC_SYSSTATUS 0x0014
static int omap_hsmmc_card_detect(struct device *dev, int slot)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+ struct omap_mmc_platform_data *mmc = host->pdata;
/* NOTE: assumes card detect signal is active-low */
return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
static int omap_hsmmc_get_wp(struct device *dev, int slot)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+ struct omap_mmc_platform_data *mmc = host->pdata;
/* NOTE: assumes write protect signal is active-high */
return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
static int omap_hsmmc_get_cover_state(struct device *dev, int slot)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+ struct omap_mmc_platform_data *mmc = host->pdata;
/* NOTE: assumes card detect signal is active-low */
return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
static int omap_hsmmc_suspend_cdirq(struct device *dev, int slot)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+ struct omap_mmc_platform_data *mmc = host->pdata;
disable_irq(mmc->slots[0].card_detect_irq);
return 0;
static int omap_hsmmc_resume_cdirq(struct device *dev, int slot)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+ struct omap_mmc_platform_data *mmc = host->pdata;
enable_irq(mmc->slots[0].card_detect_irq);
return 0;
clk_put(host->dbclk);
}
- mmc_free_host(host->mmc);
+ omap_hsmmc_gpio_free(host->pdata);
iounmap(host->base);
- omap_hsmmc_gpio_free(pdev->dev.platform_data);
+ mmc_free_host(host->mmc);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res)
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
struct sdhci_dove_priv *priv;
int ret;
- ret = sdhci_pltfm_register(pdev, &sdhci_dove_pdata);
- if (ret)
- goto sdhci_dove_register_fail;
-
priv = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_dove_priv),
GFP_KERNEL);
if (!priv) {
dev_err(&pdev->dev, "unable to allocate private data");
- ret = -ENOMEM;
- goto sdhci_dove_allocate_fail;
+ return -ENOMEM;
}
+ priv->clk = clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(priv->clk))
+ clk_prepare_enable(priv->clk);
+
+ ret = sdhci_pltfm_register(pdev, &sdhci_dove_pdata);
+ if (ret)
+ goto sdhci_dove_register_fail;
+
host = platform_get_drvdata(pdev);
pltfm_host = sdhci_priv(host);
pltfm_host->priv = priv;
- priv->clk = clk_get(&pdev->dev, NULL);
- if (!IS_ERR(priv->clk))
- clk_prepare_enable(priv->clk);
return 0;
-sdhci_dove_allocate_fail:
- sdhci_pltfm_unregister(pdev);
sdhci_dove_register_fail:
+ if (!IS_ERR(priv->clk)) {
+ clk_disable_unprepare(priv->clk);
+ clk_put(priv->clk);
+ }
return ret;
}
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_dove_priv *priv = pltfm_host->priv;
- if (priv->clk) {
- if (!IS_ERR(priv->clk)) {
- clk_disable_unprepare(priv->clk);
- clk_put(priv->clk);
- }
- devm_kfree(&pdev->dev, priv->clk);
+ sdhci_pltfm_unregister(pdev);
+
+ if (!IS_ERR(priv->clk)) {
+ clk_disable_unprepare(priv->clk);
+ clk_put(priv->clk);
}
- return sdhci_pltfm_unregister(pdev);
+ return 0;
}
static const struct of_device_id sdhci_dove_of_match_table[] __devinitdata = {
}
#endif
+static void esdhc_of_platform_init(struct sdhci_host *host)
+{
+ u32 vvn;
+
+ vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+ vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+ if (vvn == VENDOR_V_22)
+ host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
+}
+
static struct sdhci_ops sdhci_esdhc_ops = {
.read_l = esdhc_readl,
.read_w = esdhc_readw,
.enable_dma = esdhc_of_enable_dma,
.get_max_clock = esdhc_of_get_max_clock,
.get_min_clock = esdhc_of_get_min_clock,
+ .platform_init = esdhc_of_platform_init,
#ifdef CONFIG_PM
.platform_suspend = esdhc_of_suspend,
.platform_resume = esdhc_of_resume,
return ERR_PTR(-ENODEV);
}
- if (pci_resource_len(pdev, bar) != 0x100) {
+ if (pci_resource_len(pdev, bar) < 0x100) {
dev_err(&pdev->dev, "Invalid iomem size. You may "
"experience problems.\n");
}
goto err_remap;
}
+ /*
+ * Some platforms need to probe the controller to be able to
+ * determine which caps should be used.
+ */
+ if (host->ops && host->ops->platform_init)
+ host->ops->platform_init(host);
+
platform_set_drvdata(pdev, host);
return host;
if (ourhost->cur_clk != best_src) {
struct clk *clk = ourhost->clk_bus[best_src];
- clk_enable(clk);
- clk_disable(ourhost->clk_bus[ourhost->cur_clk]);
+ clk_prepare_enable(clk);
+ clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
/* turn clock off to card before changing clock source */
writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
}
/* enable the local io clock and keep it running for the moment. */
- clk_enable(sc->clk_io);
+ clk_prepare_enable(sc->clk_io);
for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
struct clk *clk;
}
#ifndef CONFIG_PM_RUNTIME
- clk_enable(sc->clk_bus[sc->cur_clk]);
+ clk_prepare_enable(sc->clk_bus[sc->cur_clk]);
#endif
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sdhci_s3c_setup_card_detect_gpio(sc);
#ifdef CONFIG_PM_RUNTIME
- clk_disable(sc->clk_io);
+ if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
+ clk_disable_unprepare(sc->clk_io);
#endif
return 0;
err_req_regs:
#ifndef CONFIG_PM_RUNTIME
- clk_disable(sc->clk_bus[sc->cur_clk]);
+ clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
#endif
for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
if (sc->clk_bus[ptr]) {
}
err_no_busclks:
- clk_disable(sc->clk_io);
+ clk_disable_unprepare(sc->clk_io);
clk_put(sc->clk_io);
err_io_clk:
gpio_free(sc->ext_cd_gpio);
#ifdef CONFIG_PM_RUNTIME
- clk_enable(sc->clk_io);
+ if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
+ clk_prepare_enable(sc->clk_io);
#endif
sdhci_remove_host(host, 1);
pm_runtime_disable(&pdev->dev);
#ifndef CONFIG_PM_RUNTIME
- clk_disable(sc->clk_bus[sc->cur_clk]);
+ clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
#endif
for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
if (sc->clk_bus[ptr]) {
clk_put(sc->clk_bus[ptr]);
}
}
- clk_disable(sc->clk_io);
+ clk_disable_unprepare(sc->clk_io);
clk_put(sc->clk_io);
if (pdev->dev.of_node) {
ret = sdhci_runtime_suspend_host(host);
- clk_disable(ourhost->clk_bus[ourhost->cur_clk]);
- clk_disable(busclk);
+ clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
+ clk_disable_unprepare(busclk);
return ret;
}
struct clk *busclk = ourhost->clk_io;
int ret;
- clk_enable(busclk);
- clk_enable(ourhost->clk_bus[ourhost->cur_clk]);
+ clk_prepare_enable(busclk);
+ clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
ret = sdhci_runtime_resume_host(host);
return ret;
}
*/
if ((host->flags & SDHCI_NEEDS_RETUNING) &&
!(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) {
- /* eMMC uses cmd21 while sd and sdio use cmd19 */
- tuning_opcode = mmc->card->type == MMC_TYPE_MMC ?
- MMC_SEND_TUNING_BLOCK_HS200 :
- MMC_SEND_TUNING_BLOCK;
- spin_unlock_irqrestore(&host->lock, flags);
- sdhci_execute_tuning(mmc, tuning_opcode);
- spin_lock_irqsave(&host->lock, flags);
-
- /* Restore original mmc_request structure */
- host->mrq = mrq;
+ if (mmc->card) {
+ /* eMMC uses cmd21 but sd and sdio use cmd19 */
+ tuning_opcode =
+ mmc->card->type == MMC_TYPE_MMC ?
+ MMC_SEND_TUNING_BLOCK_HS200 :
+ MMC_SEND_TUNING_BLOCK;
+ spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_execute_tuning(mmc, tuning_opcode);
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* Restore original mmc_request structure */
+ host->mrq = mrq;
+ }
}
if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
mmc->caps |= MMC_CAP_4_BIT_DATA;
+ if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23)
+ mmc->caps &= ~MMC_CAP_CMD23;
+
if (caps[0] & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
/* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
host->vqmmc = regulator_get(mmc_dev(mmc), "vqmmc");
- if (IS_ERR(host->vqmmc)) {
- pr_info("%s: no vqmmc regulator found\n", mmc_hostname(mmc));
- host->vqmmc = NULL;
+ if (IS_ERR_OR_NULL(host->vqmmc)) {
+ if (PTR_ERR(host->vqmmc) < 0) {
+ pr_info("%s: no vqmmc regulator found\n",
+ mmc_hostname(mmc));
+ host->vqmmc = NULL;
+ }
}
else if (regulator_is_supported_voltage(host->vqmmc, 1800000, 1800000))
regulator_enable(host->vqmmc);
ocr_avail = 0;
host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
- if (IS_ERR(host->vmmc)) {
- pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
- host->vmmc = NULL;
+ if (IS_ERR_OR_NULL(host->vmmc)) {
+ if (PTR_ERR(host->vmmc) < 0) {
+ pr_info("%s: no vmmc regulator found\n",
+ mmc_hostname(mmc));
+ host->vmmc = NULL;
+ }
} else
regulator_enable(host->vmmc);
void (*hw_reset)(struct sdhci_host *host);
void (*platform_suspend)(struct sdhci_host *host);
void (*platform_resume)(struct sdhci_host *host);
+ void (*platform_init)(struct sdhci_host *host);
};
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
platform_set_drvdata(pdev, NULL);
+ clk_disable(host->hclk);
mmc_free_host(host->mmc);
pm_runtime_put_sync(&pdev->dev);
- clk_disable(host->hclk);
pm_runtime_disable(&pdev->dev);
return 0;
#include <asm/mach/flash.h>
#include <linux/platform_data/mtd-mxc_nand.h>
-#include <mach/hardware.h>
#define DRIVER_NAME "mxc_nand"
-#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35())
-#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
-#define nfc_is_v3_2a() cpu_is_mx51()
-#define nfc_is_v3_2b() cpu_is_mx53()
-
/* Addresses for NFC registers */
#define NFC_V1_V2_BUF_SIZE (host->regs + 0x00)
#define NFC_V1_V2_BUF_ADDR (host->regs + 0x04)
.ppb_shift = 8,
};
+static inline int is_imx21_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx21_nand_devtype_data;
+}
+
+static inline int is_imx27_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx27_nand_devtype_data;
+}
+
+static inline int is_imx25_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx25_nand_devtype_data;
+}
+
+static inline int is_imx51_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx51_nand_devtype_data;
+}
+
+static inline int is_imx53_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx53_nand_devtype_data;
+}
+
+static struct platform_device_id mxcnd_devtype[] = {
+ {
+ .name = "imx21-nand",
+ .driver_data = (kernel_ulong_t) &imx21_nand_devtype_data,
+ }, {
+ .name = "imx27-nand",
+ .driver_data = (kernel_ulong_t) &imx27_nand_devtype_data,
+ }, {
+ .name = "imx25-nand",
+ .driver_data = (kernel_ulong_t) &imx25_nand_devtype_data,
+ }, {
+ .name = "imx51-nand",
+ .driver_data = (kernel_ulong_t) &imx51_nand_devtype_data,
+ }, {
+ .name = "imx53-nand",
+ .driver_data = (kernel_ulong_t) &imx53_nand_devtype_data,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mxcnd_devtype);
+
#ifdef CONFIG_OF_MTD
static const struct of_device_id mxcnd_dt_ids[] = {
{
}
#endif
-static int __init mxcnd_probe_pdata(struct mxc_nand_host *host)
-{
- struct mxc_nand_platform_data *pdata = host->dev->platform_data;
-
- if (!pdata)
- return -ENODEV;
-
- host->pdata = *pdata;
-
- if (nfc_is_v1()) {
- if (cpu_is_mx21())
- host->devtype_data = &imx21_nand_devtype_data;
- else
- host->devtype_data = &imx27_nand_devtype_data;
- } else if (nfc_is_v21()) {
- host->devtype_data = &imx25_nand_devtype_data;
- } else if (nfc_is_v3_2a()) {
- host->devtype_data = &imx51_nand_devtype_data;
- } else if (nfc_is_v3_2b()) {
- host->devtype_data = &imx53_nand_devtype_data;
- } else
- BUG();
-
- return 0;
-}
-
static int __devinit mxcnd_probe(struct platform_device *pdev)
{
struct nand_chip *this;
return PTR_ERR(host->clk);
err = mxcnd_probe_dt(host);
- if (err > 0)
- err = mxcnd_probe_pdata(host);
+ if (err > 0) {
+ struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
+ if (pdata) {
+ host->pdata = *pdata;
+ host->devtype_data = (struct mxc_nand_devtype_data *)
+ pdev->id_entry->driver_data;
+ } else {
+ err = -ENODEV;
+ }
+ }
if (err < 0)
return err;
}
/* first scan to find the device and get the page size */
- if (nand_scan_ident(mtd, nfc_is_v21() ? 4 : 1, NULL)) {
+ if (nand_scan_ident(mtd, is_imx25_nfc(host) ? 4 : 1, NULL)) {
err = -ENXIO;
goto escan;
}
this->ecc.layout = host->devtype_data->ecclayout_4k;
if (this->ecc.mode == NAND_ECC_HW) {
- if (nfc_is_v1())
+ if (is_imx21_nfc(host) || is_imx27_nfc(host))
this->ecc.strength = 1;
else
this->ecc.strength = (host->eccsize == 4) ? 4 : 8;
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(mxcnd_dt_ids),
},
+ .id_table = mxcnd_devtype,
.probe = mxcnd_probe,
.remove = __devexit_p(mxcnd_remove),
};
#include <linux/bch.h>
#endif
-#include <plat/dma.h>
-#include <plat/gpmc.h>
+#include <plat-omap/dma-omap.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#define DRIVER_NAME "omap2-nand"
#define CS_MASK 0x7
#define ENABLE_PREFETCH (0x1 << 7)
#define DMA_MPU_MODE_SHIFT 2
+#define ECCSIZE0_SHIFT 12
#define ECCSIZE1_SHIFT 22
#define ECC1RESULTSIZE 0x1
#define ECCCLEAR 0x100
#define ECC1 0x1
+#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
+#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
+#define PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
+#define PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
+#define STATUS_BUFF_EMPTY 0x00000001
+
+#define OMAP24XX_DMA_GPMC 4
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
/* wait until buffer is available for write */
do {
status = readl(info->reg.gpmc_status) &
- GPMC_STATUS_BUFF_EMPTY;
+ STATUS_BUFF_EMPTY;
} while (!status);
}
}
/* wait until buffer is available for write */
do {
status = readl(info->reg.gpmc_status) &
- GPMC_STATUS_BUFF_EMPTY;
+ STATUS_BUFF_EMPTY;
} while (!status);
}
}
} else {
do {
r_count = readl(info->reg.gpmc_prefetch_status);
- r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count);
+ r_count = PREFETCH_STATUS_FIFO_CNT(r_count);
r_count = r_count >> 2;
ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
p += r_count;
} else {
while (len) {
w_count = readl(info->reg.gpmc_prefetch_status);
- w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count);
+ w_count = PREFETCH_STATUS_FIFO_CNT(w_count);
w_count = w_count >> 1;
for (i = 0; (i < w_count) && len; i++, len -= 2)
iowrite16(*p++, info->nand.IO_ADDR_W);
do {
cpu_relax();
val = readl(info->reg.gpmc_prefetch_status);
- val = GPMC_PREFETCH_STATUS_COUNT(val);
+ val = PREFETCH_STATUS_COUNT(val);
} while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
do {
cpu_relax();
val = readl(info->reg.gpmc_prefetch_status);
- val = GPMC_PREFETCH_STATUS_COUNT(val);
+ val = PREFETCH_STATUS_COUNT(val);
} while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
u32 bytes;
bytes = readl(info->reg.gpmc_prefetch_status);
- bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes);
+ bytes = PREFETCH_STATUS_FIFO_CNT(bytes);
bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */
if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
if (this_irq == info->gpmc_irq_count)
limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
do {
val = readl(info->reg.gpmc_prefetch_status);
- val = GPMC_PREFETCH_STATUS_COUNT(val);
+ val = PREFETCH_STATUS_COUNT(val);
cpu_relax();
} while (val && (tim++ < limit));
cond_resched();
}
- status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
+ status = readb(info->reg.gpmc_nand_data);
return status;
}
static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
{
int nerrors;
- unsigned int dev_width;
+ unsigned int dev_width, nsectors;
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
struct nand_chip *chip = mtd->priv;
+ u32 val;
nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4;
dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+ nsectors = 1;
/*
* Program GPMC to perform correction on one 512-byte sector at a time.
* Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and
* gives a slight (5%) performance gain (but requires additional code).
*/
- (void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors);
+
+ writel(ECC1, info->reg.gpmc_ecc_control);
+
+ /*
+ * When using BCH, sector size is hardcoded to 512 bytes.
+ * Here we are using wrapping mode 6 both for reading and writing, with:
+ * size0 = 0 (no additional protected byte in spare area)
+ * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+ */
+ val = (32 << ECCSIZE1_SHIFT) | (0 << ECCSIZE0_SHIFT);
+ writel(val, info->reg.gpmc_ecc_size_config);
+
+ /* BCH configuration */
+ val = ((1 << 16) | /* enable BCH */
+ (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+ (0x06 << 8) | /* wrap mode = 6 */
+ (dev_width << 7) | /* bus width */
+ (((nsectors-1) & 0x7) << 4) | /* number of sectors */
+ (info->gpmc_cs << 1) | /* ECC CS */
+ (0x1)); /* enable ECC */
+
+ writel(val, info->reg.gpmc_ecc_config);
+
+ /* clear ecc and enable bits */
+ writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
}
/**
{
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code);
+ unsigned long nsectors, val1, val2;
+ int i;
+
+ nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+ for (i = 0; i < nsectors; i++) {
+
+ /* Read hw-computed remainder */
+ val1 = readl(info->reg.gpmc_bch_result0[i]);
+ val2 = readl(info->reg.gpmc_bch_result1[i]);
+
+ /*
+ * Add constant polynomial to remainder, in order to get an ecc
+ * sequence of 0xFFs for a buffer filled with 0xFFs; and
+ * left-justify the resulting polynomial.
+ */
+ *ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF);
+ *ecc_code++ = 0x13 ^ ((val2 >> 4) & 0xFF);
+ *ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
+ *ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF);
+ *ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF);
+ *ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF);
+ *ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4);
+ }
+
+ return 0;
}
/**
{
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code);
+ unsigned long nsectors, val1, val2, val3, val4;
+ int i;
+
+ nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+ for (i = 0; i < nsectors; i++) {
+
+ /* Read hw-computed remainder */
+ val1 = readl(info->reg.gpmc_bch_result0[i]);
+ val2 = readl(info->reg.gpmc_bch_result1[i]);
+ val3 = readl(info->reg.gpmc_bch_result2[i]);
+ val4 = readl(info->reg.gpmc_bch_result3[i]);
+
+ /*
+ * Add constant polynomial to remainder, in order to get an ecc
+ * sequence of 0xFFs for a buffer filled with 0xFFs.
+ */
+ *ecc_code++ = 0xef ^ (val4 & 0xFF);
+ *ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF);
+ *ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF);
+ *ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF);
+ *ecc_code++ = 0xed ^ (val3 & 0xFF);
+ *ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF);
+ *ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF);
+ *ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
+ *ecc_code++ = 0x97 ^ (val2 & 0xFF);
+ *ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF);
+ *ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
+ *ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF);
+ *ecc_code++ = 0xb5 ^ (val1 & 0xFF);
+ }
+
+ return 0;
}
/**
*/
static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
{
- int ret, max_errors;
+ int max_errors;
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
#ifdef CONFIG_MTD_NAND_OMAP_BCH8
goto fail;
}
- /* initialize GPMC BCH engine */
- ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors);
- if (ret)
- goto fail;
-
/* software bch library is only used to detect and locate errors */
info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */);
if (!info->bch)
/* Release NAND device, its internal structures and partitions */
nand_release(&info->mtd);
iounmap(info->nand.IO_ADDR_R);
- release_mem_region(info->phys_base, NAND_IO_SIZE);
+ release_mem_region(info->phys_base, info->mem_size);
kfree(info);
return 0;
}
#include <linux/regulator/consumer.h>
#include <asm/mach/flash.h>
-#include <plat/gpmc.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <asm/gpio.h>
-#include <plat/dma.h>
-#include <plat/cpu.h>
+#include <plat-omap/dma-omap.h>
#define DRIVER_NAME "omap2-onenand"
int freq;
int (*setup)(void __iomem *base, int *freq_ptr);
struct regulator *regulator;
+ u8 flags;
};
static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) {
syscfg |= ONENAND_SYS_CFG1_IOBE;
write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
- if (cpu_is_omap34xx())
+ if (c->flags & ONENAND_IN_OMAP34XX)
/* Add a delay to let GPIO settle */
syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
}
#else
-int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
- unsigned char *buffer, int offset,
- size_t count);
+static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset,
+ size_t count)
+{
+ return -ENOSYS;
+}
-int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
- const unsigned char *buffer,
- int offset, size_t count);
+static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
+ const unsigned char *buffer,
+ int offset, size_t count)
+{
+ return -ENOSYS;
+}
#endif
#else
-int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
- unsigned char *buffer, int offset,
- size_t count);
+static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset,
+ size_t count)
+{
+ return -ENOSYS;
+}
-int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
- const unsigned char *buffer,
- int offset, size_t count);
+static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
+ const unsigned char *buffer,
+ int offset, size_t count)
+{
+ return -ENOSYS;
+}
#endif
init_completion(&c->irq_done);
init_completion(&c->dma_done);
+ c->flags = pdata->flags;
c->gpmc_cs = pdata->cs;
c->gpio_irq = pdata->gpio_irq;
c->dma_channel = pdata->dma_channel;
this = &c->onenand;
if (c->dma_channel >= 0) {
this->wait = omap2_onenand_wait;
- if (cpu_is_omap34xx()) {
+ if (c->flags & ONENAND_IN_OMAP34XX) {
this->read_bufferram = omap3_onenand_read_bufferram;
this->write_bufferram = omap3_onenand_write_bufferram;
} else {
}
iounmap(c->onenand.base);
release_mem_region(c->phys_base, c->mem_size);
- gpmc_cs_free(c->gpmc_cs);
kfree(c);
return 0;
goto out;
}
- sscanf(buf, "%16s", ifname); /* IFNAMSIZ */
+ sscanf(buf, "%15s", ifname); /* IFNAMSIZ */
/* check to see if we are clearing primary */
if (!strlen(ifname) || buf[0] == '\n') {
goto out;
}
- sscanf(buf, "%16s", ifname); /* IFNAMSIZ */
+ sscanf(buf, "%15s", ifname); /* IFNAMSIZ */
/* check to see if we are clearing active */
if (!strlen(ifname) || buf[0] == '\n') {
SHMEM_EEE_ADV_STATUS_SHIFT);
if ((advertised != (eee_cfg & SHMEM_EEE_ADV_STATUS_MASK))) {
DP(BNX2X_MSG_ETHTOOL,
- "Direct manipulation of EEE advertisment is not supported\n");
+ "Direct manipulation of EEE advertisement is not supported\n");
return -EINVAL;
}
#define LINK_20GTFD LINK_STATUS_SPEED_AND_DUPLEX_20GTFD
#define LINK_20GXFD LINK_STATUS_SPEED_AND_DUPLEX_20GXFD
-
+#define LINK_UPDATE_MASK \
+ (LINK_STATUS_SPEED_AND_DUPLEX_MASK | \
+ LINK_STATUS_LINK_UP | \
+ LINK_STATUS_PHYSICAL_LINK_FLAG | \
+ LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | \
+ LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | \
+ LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | \
+ LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | \
+ LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | \
+ LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE)
#define SFP_EEPROM_CON_TYPE_ADDR 0x2
#define SFP_EEPROM_CON_TYPE_VAL_LC 0x7
DEFAULT_PHY_DEV_ADDR);
}
+static void bnx2x_xgxs_specific_func(struct bnx2x_phy *phy,
+ struct link_params *params,
+ u32 action)
+{
+ struct bnx2x *bp = params->bp;
+ switch (action) {
+ case PHY_INIT:
+ /* Set correct devad */
+ REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + params->port*0x18, 0);
+ REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18,
+ phy->def_md_devad);
+ break;
+ }
+}
+
static void bnx2x_xgxs_deassert(struct link_params *params)
{
struct bnx2x *bp = params->bp;
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val);
udelay(500);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val);
-
- REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + port*0x18, 0);
- REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18,
- params->phy[INT_PHY].def_md_devad);
+ bnx2x_xgxs_specific_func(¶ms->phy[INT_PHY], params,
+ PHY_INIT);
}
static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy,
static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars) {
- u16 val16 = 0, lane, i;
+ u16 lane, i, cl72_ctrl, an_adv = 0;
+ u16 ucode_ver;
struct bnx2x *bp = params->bp;
static struct bnx2x_reg_set reg_set[] = {
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
- {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0},
- {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0},
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff},
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555},
{MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0},
{MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415},
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190},
bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl);
+ cl72_ctrl &= 0xf8ff;
+ cl72_ctrl |= 0x3800;
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl);
+
/* Check adding advertisement for 1G KX */
if (((vars->line_speed == SPEED_AUTO_NEG) &&
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
(vars->line_speed == SPEED_1000)) {
u32 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2;
- val16 |= (1<<5);
+ an_adv |= (1<<5);
/* Enable CL37 1G Parallel Detect */
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, addr, 0x1);
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
(vars->line_speed == SPEED_10000)) {
/* Check adding advertisement for 10G KR */
- val16 |= (1<<7);
+ an_adv |= (1<<7);
/* Enable 10G Parallel Detect */
+ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+ MDIO_AER_BLOCK_AER_REG, 0);
+
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
MDIO_WC_REG_PAR_DET_10G_CTRL, 1);
-
+ bnx2x_set_aer_mmd(params, phy);
DP(NETIF_MSG_LINK, "Advertize 10G\n");
}
/* Advertised speeds */
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
- MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16);
+ MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, an_adv);
/* Advertised and set FEC (Forward Error Correction) */
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
/* Set KR Autoneg Work-Around flag for Warpcore version older than D108
*/
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_UC_INFO_B1_VERSION, &val16);
- if (val16 < 0xd108) {
- DP(NETIF_MSG_LINK, "Enable AN KR work-around\n");
+ MDIO_WC_REG_UC_INFO_B1_VERSION, &ucode_ver);
+ if (ucode_ver < 0xd108) {
+ DP(NETIF_MSG_LINK, "Enable AN KR work-around. WC ver:0x%x\n",
+ ucode_ver);
vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY;
}
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
- u16 i;
+ u16 val16, i, lane;
static struct bnx2x_reg_set reg_set[] = {
/* Disable Autoneg */
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
- {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
0x3f00},
{MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0},
{MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0},
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1},
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa},
- /* Disable CL36 PCS Tx */
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0x0},
- /* Double Wide Single Data Rate @ pll rate */
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0xFFFF},
/* Leave cl72 training enable, needed for KR */
{MDIO_PMA_DEVAD,
MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150,
bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
- /* Leave CL72 enabled */
- bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
- 0x3800);
+ lane = bnx2x_get_warpcore_lane(phy, params);
+ /* Global registers */
+ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+ MDIO_AER_BLOCK_AER_REG, 0);
+ /* Disable CL36 PCS Tx */
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
+ val16 &= ~(0x0011 << lane);
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
+ val16 |= (0x0303 << (lane << 1));
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
+ /* Restore AER */
+ bnx2x_set_aer_mmd(params, phy);
/* Set speed via PMA/PMD register */
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD,
MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040);
struct link_params *params)
{
struct bnx2x *bp = params->bp;
- u16 val16;
+ u16 val16, lane;
bnx2x_sfp_e3_set_transmitter(params, phy, 0);
bnx2x_set_mdio_clk(bp, params->chip_id, params->port);
bnx2x_set_aer_mmd(params, phy);
MDIO_WC_REG_XGXSBLK1_LANECTRL2,
val16 & 0xff00);
+ lane = bnx2x_get_warpcore_lane(phy, params);
+ /* Disable CL36 PCS Tx */
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
+ val16 |= (0x11 << lane);
+ if (phy->flags & FLAGS_WC_DUAL_MODE)
+ val16 |= (0x22 << lane);
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);
+
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
+ val16 &= ~(0x0303 << (lane << 1));
+ val16 |= (0x0101 << (lane << 1));
+ if (phy->flags & FLAGS_WC_DUAL_MODE) {
+ val16 &= ~(0x0c0c << (lane << 1));
+ val16 |= (0x0404 << (lane << 1));
+ }
+
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
+ /* Restore AER */
+ bnx2x_set_aer_mmd(params, phy);
+
}
static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy,
vars->mac_type = MAC_TYPE_NONE;
/* Update shared memory */
- vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK |
- LINK_STATUS_LINK_UP |
- LINK_STATUS_PHYSICAL_LINK_FLAG |
- LINK_STATUS_AUTO_NEGOTIATE_COMPLETE |
- LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK |
- LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK |
- LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK |
- LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE |
- LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE);
+ vars->link_status &= ~LINK_UPDATE_MASK;
vars->line_speed = 0;
bnx2x_update_mng(params, vars->link_status);
u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed;
u8 active_external_phy = INT_PHY;
vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
+ vars->link_status &= ~LINK_UPDATE_MASK;
for (phy_index = INT_PHY; phy_index < params->num_phys;
phy_index++) {
phy_vars[phy_index].flow_ctrl = 0;
static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
struct link_params *params,
u16 addr, u8 byte_cnt,
- u8 *o_buf)
+ u8 *o_buf, u8 is_init)
{
int rc = 0;
u8 i, j = 0, cnt = 0;
/* 4 byte aligned address */
addr32 = addr & (~0x3);
do {
- if (cnt == I2C_WA_PWR_ITER) {
+ if ((!is_init) && (cnt == I2C_WA_PWR_ITER)) {
bnx2x_warpcore_power_module(params, phy, 0);
/* Note that 100us are not enough here */
- usleep_range(1000,1000);
+ usleep_range(1000, 2000);
bnx2x_warpcore_power_module(params, phy, 1);
}
rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt,
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr,
- byte_cnt, o_buf);
+ byte_cnt, o_buf, 0);
break;
}
return rc;
{
u8 val;
+ int rc;
struct bnx2x *bp = params->bp;
u16 timeout;
/* Initialization time after hot-plug may take up to 300ms for
*/
for (timeout = 0; timeout < 60; timeout++) {
- if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val)
- == 0) {
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
+ rc = bnx2x_warpcore_read_sfp_module_eeprom(phy,
+ params, 1,
+ 1, &val, 1);
+ else
+ rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1,
+ &val);
+ if (rc == 0) {
DP(NETIF_MSG_LINK,
"SFP+ module initialization took %d ms\n",
timeout * 5);
}
usleep_range(5000, 10000);
}
- return -EINVAL;
+ rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val);
+ return rc;
}
static void bnx2x_8727_power_module(struct bnx2x *bp,
else
rc = bnx2x_8483x_disable_eee(phy, params, vars);
if (rc) {
- DP(NETIF_MSG_LINK, "Failed to set EEE advertisment\n");
+ DP(NETIF_MSG_LINK, "Failed to set EEE advertisement\n");
return rc;
}
} else {
.format_fw_ver = (format_fw_ver_t)NULL,
.hw_reset = (hw_reset_t)NULL,
.set_link_led = (set_link_led_t)NULL,
- .phy_specific_func = (phy_specific_func_t)NULL
+ .phy_specific_func = (phy_specific_func_t)bnx2x_xgxs_specific_func
};
static struct bnx2x_phy phy_warpcore = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
phy->media_type = ETH_PHY_BASE_T;
break;
case PORT_HW_CFG_NET_SERDES_IF_XFI:
+ phy->supported &= (SUPPORTED_1000baseT_Full |
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
phy->media_type = ETH_PHY_XFP_FIBER;
break;
case PORT_HW_CFG_NET_SERDES_IF_SFI:
DP(NETIF_MSG_LINK, "Analyze TX Fault\n");
break;
default:
- DP(NETIF_MSG_LINK, "Analyze UNKOWN\n");
+ DP(NETIF_MSG_LINK, "Analyze UNKNOWN\n");
}
DP(NETIF_MSG_LINK, "Link changed:[%x %x]->%x\n", vars->link_up,
old_status, status);
bnx2x_init_block(bp, BLOCK_DORQ, init_phase);
+ bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
+
if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) {
- bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
if (IS_MF(bp))
low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246);
/* disable FCOE L2 queue for E1x */
if (CHIP_IS_E1x(bp))
bp->flags |= NO_FCOE_FLAG;
-
+ /* disable FCOE for 57840 device, until FW supports it */
+ switch (ent->driver_data) {
+ case BCM57840_O:
+ case BCM57840_4_10:
+ case BCM57840_2_20:
+ case BCM57840_MFO:
+ case BCM57840_MF:
+ bp->flags |= NO_FCOE_FLAG;
+ }
#endif
"mismatch: [fini] csum=%#x, computed csum=%#x\n",
finicsum, cfcsum);
- /*
- * If we're a pure NIC driver then disable all offloading facilities.
- * This will allow the firmware to optimize aspects of the hardware
- * configuration which will result in improved performance.
- */
- caps_cmd.ofldcaps = 0;
- caps_cmd.iscsicaps = 0;
- caps_cmd.rdmacaps = 0;
- caps_cmd.fcoecaps = 0;
-
/*
* And now tell the firmware to use the configuration we just loaded.
*/
{
struct fw_bye_cmd c;
+ memset(&c, 0, sizeof(c));
INIT_CMD(c, BYE, WRITE);
return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}
{
struct fw_initialize_cmd c;
+ memset(&c, 0, sizeof(c));
INIT_CMD(c, INITIALIZE, WRITE);
return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}
{
struct fw_reset_cmd c;
+ memset(&c, 0, sizeof(c));
INIT_CMD(c, RESET, WRITE);
c.val = htonl(reset);
return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
HOSTPAGESIZEPF7(sge_hps));
t4_set_reg_field(adap, SGE_CONTROL,
- INGPADBOUNDARY(INGPADBOUNDARY_MASK) |
+ INGPADBOUNDARY_MASK |
EGRSTATUSPAGESIZE_MASK,
INGPADBOUNDARY(fl_align_log - 5) |
EGRSTATUSPAGESIZE(stat_len != 64));
{
struct fw_vi_enable_cmd c;
+ memset(&c, 0, sizeof(c));
c.op_to_viid = htonl(FW_CMD_OP(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST |
FW_CMD_EXEC | FW_VI_ENABLE_CMD_VIID(viid));
c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_LED | FW_LEN16(c));
struct gfar_private *priv = dev_get_drvdata(dev);
struct net_device *ndev = priv->ndev;
- if (!netif_running(ndev))
+ if (!netif_running(ndev)) {
+ netif_device_attach(ndev);
+
return 0;
+ }
gfar_init_bds(ndev);
init_registers(ndev);
case ixgbe_mac_X540:
case ixgbe_mac_82599EB:
info->so_timestamping =
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE |
SOF_TIMESTAMPING_TX_HARDWARE |
SOF_TIMESTAMPING_RX_HARDWARE |
SOF_TIMESTAMPING_RAW_HARDWARE;
JME_NAPI_DISABLE(jme);
- tasklet_disable(&jme->linkch_task);
- tasklet_disable(&jme->txclean_task);
- tasklet_disable(&jme->rxclean_task);
- tasklet_disable(&jme->rxempty_task);
+ tasklet_kill(&jme->linkch_task);
+ tasklet_kill(&jme->txclean_task);
+ tasklet_kill(&jme->rxclean_task);
+ tasklet_kill(&jme->rxempty_task);
jme_disable_rx_engine(jme);
jme_disable_tx_engine(jme);
dev0 = hw->dev[0];
unregister_netdev(dev0);
- tasklet_disable(&hw->phy_task);
+ tasklet_kill(&hw->phy_task);
spin_lock_irq(&hw->hw_lock);
hw->intr_mask = 0;
/* Delay for receive task to stop scheduling itself. */
msleep(2000 / HZ);
- tasklet_disable(&hw_priv->rx_tasklet);
- tasklet_disable(&hw_priv->tx_tasklet);
+ tasklet_kill(&hw_priv->rx_tasklet);
+ tasklet_kill(&hw_priv->tx_tasklet);
free_irq(dev->irq, hw_priv->dev);
transmit_cleanup(hw_priv, 0);
pldat->dma_buff_base_p);
free_irq(ndev->irq, ndev);
iounmap(pldat->net_base);
+ mdiobus_unregister(pldat->mii_bus);
mdiobus_free(pldat->mii_bus);
clk_disable(pldat->clk);
clk_put(pldat->clk);
void __iomem *ioaddr = tp->mmio_addr;
switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_25:
+ case RTL_GIGA_MAC_VER_26:
case RTL_GIGA_MAC_VER_29:
case RTL_GIGA_MAC_VER_30:
case RTL_GIGA_MAC_VER_32:
mc_filter[1] = swab32(data);
}
+ if (tp->mac_version == RTL_GIGA_MAC_VER_35)
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+
RTL_W32(MAR0 + 4, mc_filter[1]);
RTL_W32(MAR0 + 0, mc_filter[0]);
axienet_setoptions(ndev, lp->options &
~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
- tasklet_disable(&lp->dma_err_tasklet);
+ tasklet_kill(&lp->dma_err_tasklet);
free_irq(lp->tx_irq, ndev);
free_irq(lp->rx_irq, ndev);
struct mdiobb_ctrl *ctrl = bus->priv;
module_put(ctrl->ops->owner);
+ mdiobus_unregister(bus);
mdiobus_free(bus);
}
EXPORT_SYMBOL(free_mdio_bitbang);
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
#include <linux/gfp.h>
+#include <linux/if_vlan.h>
/*
/* no jumbogram (16K) support for now */
- dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN;
+ dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN + VLAN_HLEN;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
return 0;
} else {
u32 csum_preamble = smsc95xx_calc_csum_preamble(skb);
skb_push(skb, 4);
+ cpu_to_le32s(&csum_preamble);
memcpy(skb->data, &csum_preamble, 4);
}
}
void usbnet_defer_kevent (struct usbnet *dev, int work)
{
set_bit (work, &dev->flags);
- if (!schedule_work (&dev->kevent))
- netdev_err(dev->net, "kevent %d may have been dropped\n", work);
- else
+ if (!schedule_work (&dev->kevent)) {
+ if (net_ratelimit())
+ netdev_err(dev->net, "kevent %d may have been dropped\n", work);
+ } else {
netdev_dbg(dev->net, "kevent %d scheduled\n", work);
+ }
}
EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+ u32 buf_size;
- tbi = tq->buf_info + tq->tx_ring.next2fill;
- tbi->map_type = VMXNET3_MAP_PAGE;
- tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag,
- 0, skb_frag_size(frag),
- DMA_TO_DEVICE);
+ buf_offset = 0;
+ len = skb_frag_size(frag);
+ while (len) {
+ tbi = tq->buf_info + tq->tx_ring.next2fill;
+ if (len < VMXNET3_MAX_TX_BUF_SIZE) {
+ buf_size = len;
+ dw2 |= len;
+ } else {
+ buf_size = VMXNET3_MAX_TX_BUF_SIZE;
+ /* spec says that for TxDesc.len, 0 == 2^14 */
+ }
+ tbi->map_type = VMXNET3_MAP_PAGE;
+ tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag,
+ buf_offset, buf_size,
+ DMA_TO_DEVICE);
- tbi->len = skb_frag_size(frag);
+ tbi->len = buf_size;
- gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
- BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
+ gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
+ BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
- gdesc->txd.addr = cpu_to_le64(tbi->dma_addr);
- gdesc->dword[2] = cpu_to_le32(dw2 | skb_frag_size(frag));
- gdesc->dword[3] = 0;
+ gdesc->txd.addr = cpu_to_le64(tbi->dma_addr);
+ gdesc->dword[2] = cpu_to_le32(dw2);
+ gdesc->dword[3] = 0;
- dev_dbg(&adapter->netdev->dev,
- "txd[%u]: 0x%llu %u %u\n",
- tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr),
- le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]);
- vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
- dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+ dev_dbg(&adapter->netdev->dev,
+ "txd[%u]: 0x%llu %u %u\n",
+ tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr),
+ le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]);
+ vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
+ dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+
+ len -= buf_size;
+ buf_offset += buf_size;
+ }
}
ctx->eop_txd = gdesc;
}
}
+static int txd_estimate(const struct sk_buff *skb)
+{
+ int count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + 1;
+ int i;
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+
+ count += VMXNET3_TXD_NEEDED(skb_frag_size(frag));
+ }
+ return count;
+}
/*
* Transmits a pkt thru a given tq
union Vmxnet3_GenericDesc tempTxDesc;
#endif
- /* conservatively estimate # of descriptors to use */
- count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) +
- skb_shinfo(skb)->nr_frags + 1;
+ count = txd_estimate(skb);
ctx.ipv4 = (vlan_get_protocol(skb) == cpu_to_be16(ETH_P_IP));
= container_of(p, struct vxlan_fdb, hlist);
unsigned long timeout;
- if (f->state == NUD_PERMANENT)
+ if (f->state & NUD_PERMANENT)
continue;
timeout = f->used + vxlan->age_interval * HZ;
}
bf = list_first_entry(&sc->tx.txbuf, struct ath_buf, list);
+ bf->bf_next = NULL;
list_del(&bf->list);
spin_unlock_bh(&sc->tx.txbuflock);
u16 seq_st = 0, acked_cnt = 0, txfail_cnt = 0, seq_first;
u32 ba[WME_BA_BMP_SIZE >> 5];
int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0;
- bool rc_update = true;
+ bool rc_update = true, isba;
struct ieee80211_tx_rate rates[4];
struct ath_frame_info *fi;
int nframes;
tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK;
tid = ATH_AN_2_TID(an, tidno);
seq_first = tid->seq_start;
+ isba = ts->ts_flags & ATH9K_TX_BA;
/*
* The hardware occasionally sends a tx status for the wrong TID.
* In this case, the BA status cannot be considered valid and all
* subframes need to be retransmitted
+ *
+ * Only BlockAcks have a TID and therefore normal Acks cannot be
+ * checked
*/
- if (tidno != ts->tid)
+ if (isba && tidno != ts->tid)
txok = false;
isaggr = bf_isaggr(bf);
list_add_tail(&bf->list, &bf_head);
bf->bf_state.bf_type = 0;
+ bf->bf_next = NULL;
bf->bf_lastbf = bf;
ath_tx_fill_desc(sc, bf, txq, fi->framelen);
ath_tx_txqaddbuf(sc, txq, &bf_head, false);
{
struct b43legacy_pio_txpacket *packet, *tmp_packet;
- tasklet_disable(&queue->txtask);
+ tasklet_kill(&queue->txtask);
list_for_each_entry_safe(packet, tmp_packet, &queue->txrunning, list)
free_txpacket(packet, 0);
/*
* Check if temperature compensation is supported.
*/
- if (tssi_bounds[4] == 0xff)
+ if (tssi_bounds[4] == 0xff || step == 0xff)
return 0;
/*
} else
next = dev->bus_list.next;
- /* Run device routines with the device locked */
- device_lock(&dev->dev);
retval = cb(dev, userdata);
- device_unlock(&dev->dev);
if (retval)
break;
}
struct pci_dev *pci_dev = to_pci_dev(dev);
struct pci_driver *drv = pci_dev->driver;
+ pm_runtime_resume(dev);
+
if (drv && drv->shutdown)
drv->shutdown(pci_dev);
pci_msi_shutdown(pci_dev);
* continue to do DMA
*/
pci_disable_device(pci_dev);
-
- /*
- * Devices may be enabled to wake up by runtime PM, but they need not
- * be supposed to wake up the system from its "power off" state (e.g.
- * ACPI S5). Therefore disable wakeup for all devices that aren't
- * supposed to wake up the system at this point. The state argument
- * will be ignored by pci_enable_wake().
- */
- if (!device_may_wakeup(dev))
- pci_enable_wake(pci_dev, PCI_UNKNOWN, false);
}
#ifdef CONFIG_PM
}
struct device_attribute vga_attr = __ATTR_RO(boot_vga);
-static void
-pci_config_pm_runtime_get(struct pci_dev *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device *parent = dev->parent;
-
- if (parent)
- pm_runtime_get_sync(parent);
- pm_runtime_get_noresume(dev);
- /*
- * pdev->current_state is set to PCI_D3cold during suspending,
- * so wait until suspending completes
- */
- pm_runtime_barrier(dev);
- /*
- * Only need to resume devices in D3cold, because config
- * registers are still accessible for devices suspended but
- * not in D3cold.
- */
- if (pdev->current_state == PCI_D3cold)
- pm_runtime_resume(dev);
-}
-
-static void
-pci_config_pm_runtime_put(struct pci_dev *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device *parent = dev->parent;
-
- pm_runtime_put(dev);
- if (parent)
- pm_runtime_put_sync(parent);
-}
-
static ssize_t
pci_read_config(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
}
EXPORT_SYMBOL_GPL(pci_dev_run_wake);
+void pci_config_pm_runtime_get(struct pci_dev *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device *parent = dev->parent;
+
+ if (parent)
+ pm_runtime_get_sync(parent);
+ pm_runtime_get_noresume(dev);
+ /*
+ * pdev->current_state is set to PCI_D3cold during suspending,
+ * so wait until suspending completes
+ */
+ pm_runtime_barrier(dev);
+ /*
+ * Only need to resume devices in D3cold, because config
+ * registers are still accessible for devices suspended but
+ * not in D3cold.
+ */
+ if (pdev->current_state == PCI_D3cold)
+ pm_runtime_resume(dev);
+}
+
+void pci_config_pm_runtime_put(struct pci_dev *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device *parent = dev->parent;
+
+ pm_runtime_put(dev);
+ if (parent)
+ pm_runtime_put_sync(parent);
+}
+
/**
* pci_pm_init - Initialize PM functions of given PCI device
* @dev: PCI device to handle.
extern int pci_finish_runtime_suspend(struct pci_dev *dev);
extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
extern void pci_wakeup_bus(struct pci_bus *bus);
+extern void pci_config_pm_runtime_get(struct pci_dev *dev);
+extern void pci_config_pm_runtime_put(struct pci_dev *dev);
extern void pci_pm_init(struct pci_dev *dev);
extern void platform_pci_wakeup_init(struct pci_dev *dev);
extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
struct aer_broadcast_data *result_data;
result_data = (struct aer_broadcast_data *) data;
+ device_lock(&dev->dev);
dev->error_state = result_data->state;
if (!dev->driver ||
dev->driver ?
"no AER-aware driver" : "no driver");
}
- return 0;
+ goto out;
}
err_handler = dev->driver->err_handler;
vote = err_handler->error_detected(dev, result_data->state);
result_data->result = merge_result(result_data->result, vote);
+out:
+ device_unlock(&dev->dev);
return 0;
}
struct aer_broadcast_data *result_data;
result_data = (struct aer_broadcast_data *) data;
+ device_lock(&dev->dev);
if (!dev->driver ||
!dev->driver->err_handler ||
!dev->driver->err_handler->mmio_enabled)
- return 0;
+ goto out;
err_handler = dev->driver->err_handler;
vote = err_handler->mmio_enabled(dev);
result_data->result = merge_result(result_data->result, vote);
+out:
+ device_unlock(&dev->dev);
return 0;
}
struct aer_broadcast_data *result_data;
result_data = (struct aer_broadcast_data *) data;
+ device_lock(&dev->dev);
if (!dev->driver ||
!dev->driver->err_handler ||
!dev->driver->err_handler->slot_reset)
- return 0;
+ goto out;
err_handler = dev->driver->err_handler;
vote = err_handler->slot_reset(dev);
result_data->result = merge_result(result_data->result, vote);
+out:
+ device_unlock(&dev->dev);
return 0;
}
{
const struct pci_error_handlers *err_handler;
+ device_lock(&dev->dev);
dev->error_state = pci_channel_io_normal;
if (!dev->driver ||
!dev->driver->err_handler ||
!dev->driver->err_handler->resume)
- return 0;
+ goto out;
err_handler = dev->driver->err_handler;
err_handler->resume(dev);
+out:
+ device_unlock(&dev->dev);
return 0;
}
}
/* Hot-Plug Capable */
- if (cap_mask & PCIE_PORT_SERVICE_HP) {
+ if ((cap_mask & PCIE_PORT_SERVICE_HP) &&
+ dev->pcie_flags_reg & PCI_EXP_FLAGS_SLOT) {
pcie_capability_read_dword(dev, PCI_EXP_SLTCAP, ®32);
if (reg32 & PCI_EXP_SLTCAP_HPC) {
services |= PCIE_PORT_SERVICE_HP;
if (!access_ok(VERIFY_WRITE, buf, cnt))
return -EINVAL;
+ pci_config_pm_runtime_get(dev);
+
if ((pos & 1) && cnt) {
unsigned char val;
pci_user_read_config_byte(dev, pos, &val);
cnt--;
}
+ pci_config_pm_runtime_put(dev);
+
*ppos = pos;
return nbytes;
}
if (!access_ok(VERIFY_READ, buf, cnt))
return -EINVAL;
+ pci_config_pm_runtime_get(dev);
+
if ((pos & 1) && cnt) {
unsigned char val;
__get_user(val, buf);
cnt--;
}
+ pci_config_pm_runtime_put(dev);
+
*ppos = pos;
i_size_write(ino, dp->size);
return nbytes;
#include <asm/sizes.h>
#include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
/* NOTE: don't expect this to support many I/O cards. The 16xx chips have
config PINCTRL_SAMSUNG
bool "Samsung pinctrl driver"
+ depends on OF && GPIOLIB
select PINMUX
select PINCONF
config PINCTRL_EXYNOS4
bool "Pinctrl driver data for Exynos4 SoC"
+ depends on OF && GPIOLIB
select PINCTRL_SAMSUNG
config PINCTRL_MVEBU
else
temp = ~muxreg->val;
- val |= temp;
+ val |= muxreg->mask & temp;
pmx_writel(pmx, val, muxreg->reg);
}
}
};
/* registers */
-#define PERIP_CFG 0x32C
- #define MCIF_SEL_SHIFT 3
+#define PERIP_CFG 0x3B0
+ #define MCIF_SEL_SHIFT 5
#define MCIF_SEL_SD (0x1 << MCIF_SEL_SHIFT)
#define MCIF_SEL_CF (0x2 << MCIF_SEL_SHIFT)
#define MCIF_SEL_XD (0x3 << MCIF_SEL_SHIFT)
#define PMX_SSP0_CS0_MASK (1 << 29)
#define PMX_SSP0_CS1_2_MASK (1 << 30)
+#define PAD_DIRECTION_SEL_0 0x65C
+#define PAD_DIRECTION_SEL_1 0x660
+#define PAD_DIRECTION_SEL_2 0x664
+
/* combined macros */
#define PMX_GMII_MASK (PMX_GMIICLK_MASK | \
PMX_GMIICOL_CRS_XFERER_MIITXCLK_MASK | \
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_I2C0_MASK,
.val = PMX_I2C0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_I2C0_MASK,
+ .val = PMX_I2C0_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_SSP0_MASK,
.val = PMX_SSP0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_SSP0_MASK,
+ .val = PMX_SSP0_MASK,
},
};
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_SSP0_CS0_MASK,
.val = PMX_SSP0_CS0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_SSP0_CS0_MASK,
+ .val = PMX_SSP0_CS0_MASK,
},
};
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_SSP0_CS1_2_MASK,
.val = PMX_SSP0_CS1_2_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_SSP0_CS1_2_MASK,
+ .val = PMX_SSP0_CS1_2_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_I2S0_MASK,
.val = PMX_I2S0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_I2S0_MASK,
+ .val = PMX_I2S0_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_I2S1_MASK,
.val = PMX_I2S1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_I2S1_MASK,
+ .val = PMX_I2S1_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_CLCD1_MASK,
.val = PMX_CLCD1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_CLCD1_MASK,
+ .val = PMX_CLCD1_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_CLCD2_MASK,
.val = PMX_CLCD2_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_CLCD2_MASK,
+ .val = PMX_CLCD2_MASK,
},
};
.nmodemuxs = ARRAY_SIZE(clcd_high_res_modemux),
};
-static const char *const clcd_grps[] = { "clcd_grp", "clcd_high_res" };
+static const char *const clcd_grps[] = { "clcd_grp", "clcd_high_res_grp" };
static struct spear_function clcd_function = {
.name = "clcd",
.groups = clcd_grps,
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_EGPIO_1_GRP_MASK,
.val = PMX_EGPIO_1_GRP_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_EGPIO_0_GRP_MASK,
+ .val = PMX_EGPIO_0_GRP_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_EGPIO_1_GRP_MASK,
+ .val = PMX_EGPIO_1_GRP_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_SMI_MASK,
.val = PMX_SMI_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_SMI_MASK,
+ .val = PMX_SMI_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK,
.val = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_SMI_MASK,
+ .val = PMX_SMI_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK,
+ .val = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_GMII_MASK,
.val = PMX_GMII_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_GMII_MASK,
+ .val = PMX_GMII_MASK,
},
};
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_RGMII_REG2_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_RGMII_REG0_MASK,
+ .val = PMX_RGMII_REG0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_RGMII_REG1_MASK,
+ .val = PMX_RGMII_REG1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_RGMII_REG2_MASK,
+ .val = PMX_RGMII_REG2_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_SMII_0_1_2_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_SMII_0_1_2_MASK,
+ .val = PMX_SMII_0_1_2_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_NFCE2_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_NFCE2_MASK,
+ .val = PMX_NFCE2_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_NAND8BIT_1_MASK,
.val = PMX_NAND8BIT_1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_NAND8BIT_0_MASK,
+ .val = PMX_NAND8BIT_0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_NAND8BIT_1_MASK,
+ .val = PMX_NAND8BIT_1_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_NAND16BIT_1_MASK,
.val = PMX_NAND16BIT_1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_NAND16BIT_1_MASK,
+ .val = PMX_NAND16BIT_1_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_NAND_4CHIPS_MASK,
.val = PMX_NAND_4CHIPS_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_NAND_4CHIPS_MASK,
+ .val = PMX_NAND_4CHIPS_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_KBD_ROWCOL68_MASK,
.val = PMX_KBD_ROWCOL68_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_KBD_ROWCOL68_MASK,
+ .val = PMX_KBD_ROWCOL68_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_UART0_MASK,
.val = PMX_UART0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_UART0_MASK,
+ .val = PMX_UART0_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_UART0_MODEM_MASK,
.val = PMX_UART0_MODEM_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_UART0_MODEM_MASK,
+ .val = PMX_UART0_MODEM_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_GPT0_TMR0_MASK,
.val = PMX_GPT0_TMR0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_GPT0_TMR0_MASK,
+ .val = PMX_GPT0_TMR0_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_GPT0_TMR1_MASK,
.val = PMX_GPT0_TMR1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_GPT0_TMR1_MASK,
+ .val = PMX_GPT0_TMR1_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_GPT1_TMR0_MASK,
.val = PMX_GPT1_TMR0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_GPT1_TMR0_MASK,
+ .val = PMX_GPT1_TMR0_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_GPT1_TMR1_MASK,
.val = PMX_GPT1_TMR1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_GPT1_TMR1_MASK,
+ .val = PMX_GPT1_TMR1_MASK,
},
};
.reg = PAD_FUNCTION_EN_2, \
.mask = PMX_MCIFALL_2_MASK, \
.val = PMX_MCIFALL_2_MASK, \
+ }, { \
+ .reg = PAD_DIRECTION_SEL_0, \
+ .mask = PMX_MCI_DATA8_15_MASK, \
+ .val = PMX_MCI_DATA8_15_MASK, \
+ }, { \
+ .reg = PAD_DIRECTION_SEL_1, \
+ .mask = PMX_MCIFALL_1_MASK | PMX_NFWPRT1_MASK | \
+ PMX_NFWPRT2_MASK, \
+ .val = PMX_MCIFALL_1_MASK | PMX_NFWPRT1_MASK | \
+ PMX_NFWPRT2_MASK, \
+ }, { \
+ .reg = PAD_DIRECTION_SEL_2, \
+ .mask = PMX_MCIFALL_2_MASK, \
+ .val = PMX_MCIFALL_2_MASK, \
}
/* sdhci device */
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_TOUCH_XY_MASK,
.val = PMX_TOUCH_XY_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_TOUCH_XY_MASK,
+ .val = PMX_TOUCH_XY_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_I2C0_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_I2C0_MASK,
+ .val = PMX_I2C0_MASK,
},
};
.mask = PMX_MCIDATA1_MASK |
PMX_MCIDATA2_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_MCIDATA1_MASK |
+ PMX_MCIDATA2_MASK,
+ .val = PMX_MCIDATA1_MASK |
+ PMX_MCIDATA2_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_I2S0_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_I2S0_MASK,
+ .val = PMX_I2S0_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_I2S0_MASK | PMX_CLCD1_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_I2S0_MASK | PMX_CLCD1_MASK,
+ .val = PMX_I2S0_MASK | PMX_CLCD1_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_CLCD1_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_CLCD1_MASK,
+ .val = PMX_CLCD1_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_CLCD1_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_CLCD1_MASK,
+ .val = PMX_CLCD1_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_CLCD1_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_CLCD1_MASK,
+ .val = PMX_CLCD1_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_CLCD1_MASK | PMX_SMI_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_CLCD1_MASK | PMX_SMI_MASK,
+ .val = PMX_CLCD1_MASK | PMX_SMI_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_I2S1_MASK | PMX_MCIDATA3_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_I2S1_MASK | PMX_MCIDATA3_MASK,
+ .val = PMX_I2S1_MASK | PMX_MCIDATA3_MASK,
},
};
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_SMI_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_SMI_MASK,
+ .val = PMX_SMI_MASK,
},
};
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_MCIDATA5_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_MCIDATA4_MASK,
+ .val = PMX_MCIDATA4_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCIDATA5_MASK,
+ .val = PMX_MCIDATA5_MASK,
},
};
.mask = PMX_MCIDATA6_MASK |
PMX_MCIDATA7_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCIDATA6_MASK |
+ PMX_MCIDATA7_MASK,
+ .val = PMX_MCIDATA6_MASK |
+ PMX_MCIDATA7_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_KBD_ROWCOL25_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_KBD_ROWCOL25_MASK,
+ .val = PMX_KBD_ROWCOL25_MASK,
},
};
.mask = PMX_MCIIORDRE_MASK |
PMX_MCIIOWRWE_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCIIORDRE_MASK |
+ PMX_MCIIOWRWE_MASK,
+ .val = PMX_MCIIORDRE_MASK |
+ PMX_MCIIOWRWE_MASK,
},
};
.mask = PMX_MCIRESETCF_MASK |
PMX_MCICS0CE_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCIRESETCF_MASK |
+ PMX_MCICS0CE_MASK,
+ .val = PMX_MCIRESETCF_MASK |
+ PMX_MCICS0CE_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_NFRSTPWDWN3_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_NFRSTPWDWN2_MASK,
+ .val = PMX_NFRSTPWDWN2_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_NFRSTPWDWN3_MASK,
+ .val = PMX_NFRSTPWDWN3_MASK,
},
};
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_MCICFINTR_MASK | PMX_MCIIORDY_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCICFINTR_MASK | PMX_MCIIORDY_MASK,
+ .val = PMX_MCICFINTR_MASK | PMX_MCIIORDY_MASK,
},
};
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_MCICS1_MASK | PMX_MCIDMAACK_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCICS1_MASK | PMX_MCIDMAACK_MASK,
+ .val = PMX_MCICS1_MASK | PMX_MCIDMAACK_MASK,
},
};
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_KBD_ROWCOL25_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_KBD_ROWCOL25_MASK,
+ .val = PMX_KBD_ROWCOL25_MASK,
},
};
.ngroups = ARRAY_SIZE(can1_grps),
};
-/* Pad multiplexing for pci device */
-static const unsigned pci_sata_pins[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 18,
+/* Pad multiplexing for (ras-ip) pci device */
+static const unsigned pci_pins[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 18,
19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,
37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54,
55, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 };
-#define PCI_SATA_MUXREG \
- { \
- .reg = PAD_FUNCTION_EN_0, \
- .mask = PMX_MCI_DATA8_15_MASK, \
- .val = 0, \
- }, { \
- .reg = PAD_FUNCTION_EN_1, \
- .mask = PMX_PCI_REG1_MASK, \
- .val = 0, \
- }, { \
- .reg = PAD_FUNCTION_EN_2, \
- .mask = PMX_PCI_REG2_MASK, \
- .val = 0, \
- }
-/* pad multiplexing for pcie0 device */
+static struct spear_muxreg pci_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_MCI_DATA8_15_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_PCI_REG1_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_PCI_REG2_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_MCI_DATA8_15_MASK,
+ .val = PMX_MCI_DATA8_15_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_PCI_REG1_MASK,
+ .val = PMX_PCI_REG1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_PCI_REG2_MASK,
+ .val = PMX_PCI_REG2_MASK,
+ },
+};
+
+static struct spear_modemux pci_modemux[] = {
+ {
+ .muxregs = pci_muxreg,
+ .nmuxregs = ARRAY_SIZE(pci_muxreg),
+ },
+};
+
+static struct spear_pingroup pci_pingroup = {
+ .name = "pci_grp",
+ .pins = pci_pins,
+ .npins = ARRAY_SIZE(pci_pins),
+ .modemuxs = pci_modemux,
+ .nmodemuxs = ARRAY_SIZE(pci_modemux),
+};
+
+static const char *const pci_grps[] = { "pci_grp" };
+static struct spear_function pci_function = {
+ .name = "pci",
+ .groups = pci_grps,
+ .ngroups = ARRAY_SIZE(pci_grps),
+};
+
+/* pad multiplexing for (fix-part) pcie0 device */
static struct spear_muxreg pcie0_muxreg[] = {
- PCI_SATA_MUXREG,
{
.reg = PCIE_SATA_CFG,
.mask = PCIE_CFG_VAL(0),
static struct spear_pingroup pcie0_pingroup = {
.name = "pcie0_grp",
- .pins = pci_sata_pins,
- .npins = ARRAY_SIZE(pci_sata_pins),
.modemuxs = pcie0_modemux,
.nmodemuxs = ARRAY_SIZE(pcie0_modemux),
};
-/* pad multiplexing for pcie1 device */
+/* pad multiplexing for (fix-part) pcie1 device */
static struct spear_muxreg pcie1_muxreg[] = {
- PCI_SATA_MUXREG,
{
.reg = PCIE_SATA_CFG,
.mask = PCIE_CFG_VAL(1),
static struct spear_pingroup pcie1_pingroup = {
.name = "pcie1_grp",
- .pins = pci_sata_pins,
- .npins = ARRAY_SIZE(pci_sata_pins),
.modemuxs = pcie1_modemux,
.nmodemuxs = ARRAY_SIZE(pcie1_modemux),
};
-/* pad multiplexing for pcie2 device */
+/* pad multiplexing for (fix-part) pcie2 device */
static struct spear_muxreg pcie2_muxreg[] = {
- PCI_SATA_MUXREG,
{
.reg = PCIE_SATA_CFG,
.mask = PCIE_CFG_VAL(2),
static struct spear_pingroup pcie2_pingroup = {
.name = "pcie2_grp",
- .pins = pci_sata_pins,
- .npins = ARRAY_SIZE(pci_sata_pins),
.modemuxs = pcie2_modemux,
.nmodemuxs = ARRAY_SIZE(pcie2_modemux),
};
-static const char *const pci_grps[] = { "pcie0_grp", "pcie1_grp", "pcie2_grp" };
-static struct spear_function pci_function = {
- .name = "pci",
- .groups = pci_grps,
- .ngroups = ARRAY_SIZE(pci_grps),
+static const char *const pcie_grps[] = { "pcie0_grp", "pcie1_grp", "pcie2_grp"
+};
+static struct spear_function pcie_function = {
+ .name = "pci_express",
+ .groups = pcie_grps,
+ .ngroups = ARRAY_SIZE(pcie_grps),
};
/* pad multiplexing for sata0 device */
static struct spear_muxreg sata0_muxreg[] = {
- PCI_SATA_MUXREG,
{
.reg = PCIE_SATA_CFG,
.mask = SATA_CFG_VAL(0),
static struct spear_pingroup sata0_pingroup = {
.name = "sata0_grp",
- .pins = pci_sata_pins,
- .npins = ARRAY_SIZE(pci_sata_pins),
.modemuxs = sata0_modemux,
.nmodemuxs = ARRAY_SIZE(sata0_modemux),
};
/* pad multiplexing for sata1 device */
static struct spear_muxreg sata1_muxreg[] = {
- PCI_SATA_MUXREG,
{
.reg = PCIE_SATA_CFG,
.mask = SATA_CFG_VAL(1),
static struct spear_pingroup sata1_pingroup = {
.name = "sata1_grp",
- .pins = pci_sata_pins,
- .npins = ARRAY_SIZE(pci_sata_pins),
.modemuxs = sata1_modemux,
.nmodemuxs = ARRAY_SIZE(sata1_modemux),
};
/* pad multiplexing for sata2 device */
static struct spear_muxreg sata2_muxreg[] = {
- PCI_SATA_MUXREG,
{
.reg = PCIE_SATA_CFG,
.mask = SATA_CFG_VAL(2),
static struct spear_pingroup sata2_pingroup = {
.name = "sata2_grp",
- .pins = pci_sata_pins,
- .npins = ARRAY_SIZE(pci_sata_pins),
.modemuxs = sata2_modemux,
.nmodemuxs = ARRAY_SIZE(sata2_modemux),
};
PMX_KBD_COL0_MASK | PMX_NFIO8_15_MASK | PMX_NFCE1_MASK |
PMX_NFCE2_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_KBD_ROWCOL25_MASK | PMX_KBD_COL1_MASK |
+ PMX_KBD_COL0_MASK | PMX_NFIO8_15_MASK | PMX_NFCE1_MASK |
+ PMX_NFCE2_MASK,
+ .val = PMX_KBD_ROWCOL25_MASK | PMX_KBD_COL1_MASK |
+ PMX_KBD_COL0_MASK | PMX_NFIO8_15_MASK | PMX_NFCE1_MASK |
+ PMX_NFCE2_MASK,
},
};
.mask = PMX_MCIADDR0ALE_MASK | PMX_MCIADDR2_MASK |
PMX_MCICECF_MASK | PMX_MCICEXD_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCIADDR0ALE_MASK | PMX_MCIADDR2_MASK |
+ PMX_MCICECF_MASK | PMX_MCICEXD_MASK,
+ .val = PMX_MCIADDR0ALE_MASK | PMX_MCIADDR2_MASK |
+ PMX_MCICECF_MASK | PMX_MCICEXD_MASK,
},
};
.mask = PMX_MCICDCF1_MASK | PMX_MCICDCF2_MASK | PMX_MCICDXD_MASK
| PMX_MCILEDS_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCICDCF1_MASK | PMX_MCICDCF2_MASK | PMX_MCICDXD_MASK
+ | PMX_MCILEDS_MASK,
+ .val = PMX_MCICDCF1_MASK | PMX_MCICDCF2_MASK | PMX_MCICDXD_MASK
+ | PMX_MCILEDS_MASK,
},
};
&can0_dis_sd_pingroup,
&can1_dis_sd_pingroup,
&can1_dis_kbd_pingroup,
+ &pci_pingroup,
&pcie0_pingroup,
&pcie1_pingroup,
&pcie2_pingroup,
&can0_function,
&can1_function,
&pci_function,
+ &pcie_function,
&sata_function,
&ssp1_function,
&gpt64_function,
* Pad multiplexing for making all pads as gpio's. This is done to override the
* values passed from bootloader and start from scratch.
*/
-static const unsigned pads_as_gpio_pins[] = { 251 };
+static const unsigned pads_as_gpio_pins[] = { 12, 88, 89, 251 };
static struct spear_muxreg pads_as_gpio_muxreg[] = {
{
.reg = PAD_FUNCTION_EN_1,
.nmodemuxs = ARRAY_SIZE(clcd_modemux),
};
-static const char *const clcd_grps[] = { "clcd_grp" };
+/* Disable cld runtime to save panel damage */
+static struct spear_muxreg clcd_sleep_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = ARM_TRACE_MASK | MIPHY_DBG_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_5,
+ .mask = CLCD_REG4_MASK | CLCD_AND_ARM_TRACE_REG4_MASK,
+ .val = 0x0,
+ }, {
+ .reg = PAD_FUNCTION_EN_6,
+ .mask = CLCD_AND_ARM_TRACE_REG5_MASK,
+ .val = 0x0,
+ }, {
+ .reg = PAD_FUNCTION_EN_7,
+ .mask = CLCD_AND_ARM_TRACE_REG6_MASK,
+ .val = 0x0,
+ },
+};
+
+static struct spear_modemux clcd_sleep_modemux[] = {
+ {
+ .muxregs = clcd_sleep_muxreg,
+ .nmuxregs = ARRAY_SIZE(clcd_sleep_muxreg),
+ },
+};
+
+static struct spear_pingroup clcd_sleep_pingroup = {
+ .name = "clcd_sleep_grp",
+ .pins = clcd_pins,
+ .npins = ARRAY_SIZE(clcd_pins),
+ .modemuxs = clcd_sleep_modemux,
+ .nmodemuxs = ARRAY_SIZE(clcd_sleep_modemux),
+};
+
+static const char *const clcd_grps[] = { "clcd_grp", "clcd_sleep_grp" };
static struct spear_function clcd_function = {
.name = "clcd",
.groups = clcd_grps,
&sdhci_pingroup,
&cf_pingroup,
&xd_pingroup,
+ &clcd_sleep_pingroup,
&clcd_pingroup,
&arm_trace_pingroup,
&miphy_dbg_pingroup,
.reg = PMX_CONFIG_REG,
.mask = PMX_SSP_CS_MASK,
.val = 0,
+ }, {
+ .reg = MODE_CONFIG_REG,
+ .mask = PMX_PWM_MASK,
+ .val = PMX_PWM_MASK,
}, {
.reg = IP_SEL_PAD_30_39_REG,
.mask = PMX_PL_34_MASK,
};
/* Pad multiplexing for cadence mii 1_2 as smii or rmii device */
-static const unsigned smii0_1_pins[] = { 10, 11, 13, 14, 15, 16, 17, 18, 19, 20,
+static const unsigned rmii0_1_pins[] = { 10, 11, 13, 14, 15, 16, 17, 18, 19, 20,
21, 22, 23, 24, 25, 26, 27 };
-static const unsigned rmii0_1_pins[] = { 10, 11, 21, 22, 23, 24, 25, 26, 27 };
+static const unsigned smii0_1_pins[] = { 10, 11, 21, 22, 23, 24, 25, 26, 27 };
static struct spear_muxreg mii0_1_muxreg[] = {
{
.reg = PMX_CONFIG_REG,
#include "pinctrl-spear.h"
/* pad mux declarations */
+#define PMX_PWM_MASK (1 << 16)
#define PMX_FIRDA_MASK (1 << 14)
#define PMX_I2C_MASK (1 << 13)
#define PMX_SSP_CS_MASK (1 << 12)
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <mach/hardware.h>
-
#define RTC_INPUT_CLK_32768HZ (0x00 << 5)
#define RTC_INPUT_CLK_32000HZ (0x01 << 5)
#define RTC_INPUT_CLK_38400HZ (0x02 << 5)
#define RTC_TEST2 0x2C /* 32bit rtc test reg 2 */
#define RTC_TEST3 0x30 /* 32bit rtc test reg 3 */
+enum imx_rtc_type {
+ IMX1_RTC,
+ IMX21_RTC,
+};
+
struct rtc_plat_data {
struct rtc_device *rtc;
void __iomem *ioaddr;
int irq;
struct clk *clk;
struct rtc_time g_rtc_alarm;
+ enum imx_rtc_type devtype;
};
+static struct platform_device_id imx_rtc_devtype[] = {
+ {
+ .name = "imx1-rtc",
+ .driver_data = IMX1_RTC,
+ }, {
+ .name = "imx21-rtc",
+ .driver_data = IMX21_RTC,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, imx_rtc_devtype);
+
+static inline int is_imx1_rtc(struct rtc_plat_data *data)
+{
+ return data->devtype == IMX1_RTC;
+}
+
/*
* This function is used to obtain the RTC time or the alarm value in
* second.
*/
static int mxc_rtc_set_mmss(struct device *dev, unsigned long time)
{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
/*
* TTC_DAYR register is 9-bit in MX1 SoC, save time and day of year only
*/
- if (cpu_is_mx1()) {
+ if (is_imx1_rtc(pdata)) {
struct rtc_time tm;
rtc_time_to_tm(time, &tm);
if (!pdata)
return -ENOMEM;
+ pdata->devtype = pdev->id_entry->driver_data;
+
if (!devm_request_mem_region(&pdev->dev, res->start,
resource_size(res), pdev->name))
return -EBUSY;
#endif
.owner = THIS_MODULE,
},
+ .id_table = imx_rtc_devtype,
.probe = mxc_rtc_probe,
.remove = __devexit_p(mxc_rtc_remove),
};
extern void css_reiterate_subchannels(void);
void css_update_ssd_info(struct subchannel *sch);
-#define __MAX_SUBCHANNEL 65535
-#define __MAX_SSID 3
-
struct channel_subsystem {
u8 cssid;
int valid;
}
if (device_is_disconnected(cdev))
return IO_SCH_REPROBE;
- if (cdev->online)
+ if (cdev->online && !cdev->private->flags.resuming)
return IO_SCH_VERIFY;
if (cdev->private->state == DEV_STATE_NOT_OPER)
return IO_SCH_UNREG_ATTACH;
rc = 0;
goto out_unlock;
case IO_SCH_VERIFY:
- if (cdev->private->flags.resuming == 1) {
- if (cio_enable_subchannel(sch, (u32)(addr_t)sch)) {
- ccw_device_set_notoper(cdev);
- break;
- }
- }
/* Trigger path verification. */
io_subchannel_verify(sch);
rc = 0;
void idset_add_set(struct idset *to, struct idset *from)
{
- int len = min(__BITOPS_WORDS(to->num_ssid * to->num_id),
- __BITOPS_WORDS(from->num_ssid * from->num_id));
+ int len = min(to->num_ssid * to->num_id, from->num_ssid * from->num_id);
bitmap_or(to->bitmap, to->bitmap, from->bitmap, len);
}
int
qla24xx_disable_vp(scsi_qla_host_t *vha)
{
+ unsigned long flags;
int ret;
ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
/* Remove port id from vp target map */
+ spin_lock_irqsave(&vha->hw->vport_slock, flags);
qlt_update_vp_map(vha, RESET_AL_PA);
+ spin_unlock_irqrestore(&vha->hw->vport_slock, flags);
qla2x00_mark_vp_devices_dead(vha);
atomic_set(&vha->vp_state, VP_FAILED);
int pmap_len;
fc_port_t *fcport;
int global_resets;
+ unsigned long flags;
retry:
global_resets = atomic_read(&ha->tgt.qla_tgt->tgt_global_resets_count);
sess->s_id.b.area, sess->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.al_pa, fcport->d_id.b.area, fcport->loop_id);
- sess->s_id = fcport->d_id;
- sess->loop_id = fcport->loop_id;
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id,
+ (fcport->flags & FCF_CONF_COMP_SUPPORTED));
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
res = true;
qlt_undelete_sess(sess);
kref_get(&sess->se_sess->sess_kref);
- sess->s_id = fcport->d_id;
- sess->loop_id = fcport->loop_id;
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id,
+ (fcport->flags & FCF_CONF_COMP_SUPPORTED));
+
if (sess->local && !local)
sess->local = 0;
spin_unlock_irqrestore(&ha->hardware_lock, flags);
*/
kref_get(&sess->se_sess->sess_kref);
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ sess->conf_compl_supported = (fcport->flags & FCF_CONF_COMP_SUPPORTED);
BUILD_BUG_ON(sizeof(sess->port_name) != sizeof(fcport->port_name));
memcpy(sess->port_name, fcport->port_name, sizeof(sess->port_name));
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf007,
"Reappeared sess %p\n", sess);
}
- sess->s_id = fcport->d_id;
- sess->loop_id = fcport->loop_id;
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id,
+ (fcport->flags & FCF_CONF_COMP_SUPPORTED));
}
if (sess && sess->local) {
int (*check_initiator_node_acl)(struct scsi_qla_host *, unsigned char *,
void *, uint8_t *, uint16_t);
+ void (*update_sess)(struct qla_tgt_sess *, port_id_t, uint16_t, bool);
struct qla_tgt_sess *(*find_sess_by_loop_id)(struct scsi_qla_host *,
const uint16_t);
struct qla_tgt_sess *(*find_sess_by_s_id)(struct scsi_qla_host *,
struct tcm_qla2xxx_tpg, se_tpg);
struct tcm_qla2xxx_lport *lport = tpg->lport;
- return &lport->lport_name[0];
+ return lport->lport_naa_name;
}
static char *tcm_qla2xxx_npiv_get_fabric_wwn(struct se_portal_group *se_tpg)
return 0;
}
+static void tcm_qla2xxx_update_sess(struct qla_tgt_sess *sess, port_id_t s_id,
+ uint16_t loop_id, bool conf_compl_supported)
+{
+ struct qla_tgt *tgt = sess->tgt;
+ struct qla_hw_data *ha = tgt->ha;
+ struct tcm_qla2xxx_lport *lport = ha->tgt.target_lport_ptr;
+ struct se_node_acl *se_nacl = sess->se_sess->se_node_acl;
+ struct tcm_qla2xxx_nacl *nacl = container_of(se_nacl,
+ struct tcm_qla2xxx_nacl, se_node_acl);
+ u32 key;
+
+
+ if (sess->loop_id != loop_id || sess->s_id.b24 != s_id.b24)
+ pr_info("Updating session %p from port %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x loop_id %d -> %d s_id %x:%x:%x -> %x:%x:%x\n",
+ sess,
+ sess->port_name[0], sess->port_name[1],
+ sess->port_name[2], sess->port_name[3],
+ sess->port_name[4], sess->port_name[5],
+ sess->port_name[6], sess->port_name[7],
+ sess->loop_id, loop_id,
+ sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa,
+ s_id.b.domain, s_id.b.area, s_id.b.al_pa);
+
+ if (sess->loop_id != loop_id) {
+ /*
+ * Because we can shuffle loop IDs around and we
+ * update different sessions non-atomically, we might
+ * have overwritten this session's old loop ID
+ * already, and we might end up overwriting some other
+ * session that will be updated later. So we have to
+ * be extra careful and we can't warn about those things...
+ */
+ if (lport->lport_loopid_map[sess->loop_id].se_nacl == se_nacl)
+ lport->lport_loopid_map[sess->loop_id].se_nacl = NULL;
+
+ lport->lport_loopid_map[loop_id].se_nacl = se_nacl;
+
+ sess->loop_id = loop_id;
+ }
+
+ if (sess->s_id.b24 != s_id.b24) {
+ key = (((u32) sess->s_id.b.domain << 16) |
+ ((u32) sess->s_id.b.area << 8) |
+ ((u32) sess->s_id.b.al_pa));
+
+ if (btree_lookup32(&lport->lport_fcport_map, key))
+ WARN(btree_remove32(&lport->lport_fcport_map, key) != se_nacl,
+ "Found wrong se_nacl when updating s_id %x:%x:%x\n",
+ sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa);
+ else
+ WARN(1, "No lport_fcport_map entry for s_id %x:%x:%x\n",
+ sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa);
+
+ key = (((u32) s_id.b.domain << 16) |
+ ((u32) s_id.b.area << 8) |
+ ((u32) s_id.b.al_pa));
+
+ if (btree_lookup32(&lport->lport_fcport_map, key)) {
+ WARN(1, "Already have lport_fcport_map entry for s_id %x:%x:%x\n",
+ s_id.b.domain, s_id.b.area, s_id.b.al_pa);
+ btree_update32(&lport->lport_fcport_map, key, se_nacl);
+ } else {
+ btree_insert32(&lport->lport_fcport_map, key, se_nacl, GFP_ATOMIC);
+ }
+
+ sess->s_id = s_id;
+ nacl->nport_id = key;
+ }
+
+ sess->conf_compl_supported = conf_compl_supported;
+}
+
/*
* Calls into tcm_qla2xxx used by qla2xxx LLD I/O path.
*/
.free_cmd = tcm_qla2xxx_free_cmd,
.free_mcmd = tcm_qla2xxx_free_mcmd,
.free_session = tcm_qla2xxx_free_session,
+ .update_sess = tcm_qla2xxx_update_sess,
.check_initiator_node_acl = tcm_qla2xxx_check_initiator_node_acl,
.find_sess_by_s_id = tcm_qla2xxx_find_sess_by_s_id,
.find_sess_by_loop_id = tcm_qla2xxx_find_sess_by_loop_id,
lport->lport_wwpn = wwpn;
tcm_qla2xxx_format_wwn(&lport->lport_name[0], TCM_QLA2XXX_NAMELEN,
wwpn);
+ sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) wwpn);
ret = tcm_qla2xxx_init_lport(lport);
if (ret != 0)
lport->lport_npiv_wwnn = npiv_wwnn;
tcm_qla2xxx_npiv_format_wwn(&lport->lport_npiv_name[0],
TCM_QLA2XXX_NAMELEN, npiv_wwpn, npiv_wwnn);
+ sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) npiv_wwpn);
/* FIXME: tcm_qla2xxx_npiv_make_lport */
ret = -ENOSYS;
u64 lport_npiv_wwnn;
/* ASCII formatted WWPN for FC Target Lport */
char lport_name[TCM_QLA2XXX_NAMELEN];
+ /* ASCII formatted naa WWPN for VPD page 83 etc */
+ char lport_naa_name[TCM_QLA2XXX_NAMELEN];
/* ASCII formatted WWPN+WWNN for NPIV FC Target Lport */
char lport_npiv_name[TCM_QLA2XXX_NPIV_NAMELEN];
/* map for fc_port pointers in 24-bit FC Port ID space */
static const struct of_device_id qpti_match[];
static int __devinit qpti_sbus_probe(struct platform_device *op)
{
- const struct of_device_id *match;
- struct scsi_host_template *tpnt;
struct device_node *dp = op->dev.of_node;
struct Scsi_Host *host;
struct qlogicpti *qpti;
static int nqptis;
const char *fcode;
- match = of_match_device(qpti_match, &op->dev);
- if (!match)
- return -EINVAL;
- tpnt = match->data;
-
/* Sometimes Antares cards come up not completely
* setup, and we get a report of a zero IRQ.
*/
if (op->archdata.irqs[0] == 0)
return -ENODEV;
- host = scsi_host_alloc(tpnt, sizeof(struct qlogicpti));
+ host = scsi_host_alloc(&qpti_template, sizeof(struct qlogicpti));
if (!host)
return -ENOMEM;
static const struct of_device_id qpti_match[] = {
{
.name = "ptisp",
- .data = &qpti_template,
},
{
.name = "PTI,ptisp",
- .data = &qpti_template,
},
{
.name = "QLGC,isp",
- .data = &qpti_template,
},
{
.name = "SUNW,isp",
- .data = &qpti_template,
},
{},
};
#include <linux/vmalloc.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
-#include <plat/clock.h>
#include <linux/clk.h>
#include <plat/mailbox.h>
#include <linux/pagemap.h>
*/
iscsit_thread_check_cpumask(conn, current, 1);
- schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT);
+ wait_event_interruptible(conn->queues_wq,
+ !iscsit_conn_all_queues_empty(conn) ||
+ ts->status == ISCSI_THREAD_SET_RESET);
if ((ts->status == ISCSI_THREAD_SET_RESET) ||
signal_pending(current))
};
struct iscsi_conn {
+ wait_queue_head_t queues_wq;
/* Authentication Successful for this connection */
u8 auth_complete;
/* State connection is currently in */
static int iscsi_login_init_conn(struct iscsi_conn *conn)
{
+ init_waitqueue_head(&conn->queues_wq);
INIT_LIST_HEAD(&conn->conn_list);
INIT_LIST_HEAD(&conn->conn_cmd_list);
INIT_LIST_HEAD(&conn->immed_queue_list);
atomic_set(&conn->check_immediate_queue, 1);
spin_unlock_bh(&conn->immed_queue_lock);
- wake_up_process(conn->thread_set->tx_thread);
+ wake_up(&conn->queues_wq);
}
struct iscsi_queue_req *iscsit_get_cmd_from_immediate_queue(struct iscsi_conn *conn)
atomic_inc(&cmd->response_queue_count);
spin_unlock_bh(&conn->response_queue_lock);
- wake_up_process(conn->thread_set->tx_thread);
+ wake_up(&conn->queues_wq);
}
struct iscsi_queue_req *iscsit_get_cmd_from_response_queue(struct iscsi_conn *conn)
}
}
+bool iscsit_conn_all_queues_empty(struct iscsi_conn *conn)
+{
+ bool empty;
+
+ spin_lock_bh(&conn->immed_queue_lock);
+ empty = list_empty(&conn->immed_queue_list);
+ spin_unlock_bh(&conn->immed_queue_lock);
+
+ if (!empty)
+ return empty;
+
+ spin_lock_bh(&conn->response_queue_lock);
+ empty = list_empty(&conn->response_queue_list);
+ spin_unlock_bh(&conn->response_queue_lock);
+
+ return empty;
+}
+
void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *conn)
{
struct iscsi_queue_req *qr, *qr_tmp;
extern void iscsit_add_cmd_to_response_queue(struct iscsi_cmd *, struct iscsi_conn *, u8);
extern struct iscsi_queue_req *iscsit_get_cmd_from_response_queue(struct iscsi_conn *);
extern void iscsit_remove_cmd_from_tx_queues(struct iscsi_cmd *, struct iscsi_conn *);
+extern bool iscsit_conn_all_queues_empty(struct iscsi_conn *);
extern void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *);
extern void iscsit_release_cmd(struct iscsi_cmd *);
extern void iscsit_free_cmd(struct iscsi_cmd *);
if (ret < 0)
goto out;
- if (core_dev_setup_virtual_lun0() < 0)
+ ret = core_dev_setup_virtual_lun0();
+ if (ret < 0)
goto out;
return 0;
static u32 se_dev_align_max_sectors(u32 max_sectors, u32 block_size)
{
- u32 tmp, aligned_max_sectors;
+ u32 aligned_max_sectors;
+ u32 alignment;
/*
* Limit max_sectors to a PAGE_SIZE aligned value for modern
* transport_allocate_data_tasks() operation.
*/
- tmp = rounddown((max_sectors * block_size), PAGE_SIZE);
- aligned_max_sectors = (tmp / block_size);
- if (max_sectors != aligned_max_sectors) {
- printk(KERN_INFO "Rounding down aligned max_sectors from %u"
- " to %u\n", max_sectors, aligned_max_sectors);
- return aligned_max_sectors;
- }
+ alignment = max(1ul, PAGE_SIZE / block_size);
+ aligned_max_sectors = rounddown(max_sectors, alignment);
+
+ if (max_sectors != aligned_max_sectors)
+ pr_info("Rounding down aligned max_sectors from %u to %u\n",
+ max_sectors, aligned_max_sectors);
- return max_sectors;
+ return aligned_max_sectors;
}
void se_dev_set_default_attribs(
return 0;
}
+static int sbc_emulate_noop(struct se_cmd *cmd)
+{
+ target_complete_cmd(cmd, GOOD);
+ return 0;
+}
+
static inline u32 sbc_get_size(struct se_cmd *cmd, u32 sectors)
{
return cmd->se_dev->se_sub_dev->se_dev_attrib.block_size * sectors;
size = 0;
cmd->execute_cmd = sbc_emulate_verify;
break;
+ case REZERO_UNIT:
+ case SEEK_6:
+ case SEEK_10:
+ /*
+ * There are still clients out there which use these old SCSI-2
+ * commands. This mainly happens when running VMs with legacy
+ * guest systems, connected via SCSI command pass-through to
+ * iSCSI targets. Make them happy and return status GOOD.
+ */
+ size = 0;
+ cmd->execute_cmd = sbc_emulate_noop;
+ break;
default:
ret = spc_parse_cdb(cmd, &size);
if (ret)
unsigned char buf[SE_INQUIRY_BUF];
int p, ret;
+ memset(buf, 0, SE_INQUIRY_BUF);
+
if (dev == tpg->tpg_virt_lun0.lun_se_dev)
buf[0] = 0x3f; /* Not connected */
else
printk("ABORT_TASK: Found referenced %s task_tag: %u\n",
se_cmd->se_tfo->get_fabric_name(), ref_tag);
- spin_lock_irq(&se_cmd->t_state_lock);
+ spin_lock(&se_cmd->t_state_lock);
if (se_cmd->transport_state & CMD_T_COMPLETE) {
printk("ABORT_TASK: ref_tag: %u already complete, skipping\n", ref_tag);
- spin_unlock_irq(&se_cmd->t_state_lock);
+ spin_unlock(&se_cmd->t_state_lock);
spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
goto out;
}
se_cmd->transport_state |= CMD_T_ABORTED;
- spin_unlock_irq(&se_cmd->t_state_lock);
+ spin_unlock(&se_cmd->t_state_lock);
list_del_init(&se_cmd->se_cmd_list);
kref_get(&se_cmd->cmd_kref);
se_cmd->se_tmr_req->response = TMR_LUN_DOES_NOT_EXIST;
se_cmd->se_tfo->queue_tm_rsp(se_cmd);
- transport_generic_free_cmd(se_cmd, 0);
}
/**
},
{ },
};
-MODULE_DEVICE_TABLE(platform, exynos4_tmu_driver_ids);
+MODULE_DEVICE_TABLE(platform, exynos_tmu_driver_ids);
static inline struct exynos_tmu_platform_data *exynos_get_driver_data(
struct platform_device *pdev)
goto error_free_priv;
}
- zone = thermal_zone_device_register("rcar_thermal", 0, priv,
+ zone = thermal_zone_device_register("rcar_thermal", 0, 0, priv,
&rcar_thermal_zone_ops, 0, 0);
if (IS_ERR(zone)) {
dev_err(&pdev->dev, "thermal zone device is NULL\n");
#define ECHO_OP_SET_CANON_COL 0x81
#define ECHO_OP_ERASE_TAB 0x82
+struct n_tty_data {
+ unsigned int column;
+ unsigned long overrun_time;
+ int num_overrun;
+
+ unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
+ unsigned char echo_overrun:1;
+
+ DECLARE_BITMAP(process_char_map, 256);
+ DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
+
+ char *read_buf;
+ int read_head;
+ int read_tail;
+ int read_cnt;
+
+ unsigned char *echo_buf;
+ unsigned int echo_pos;
+ unsigned int echo_cnt;
+
+ int canon_data;
+ unsigned long canon_head;
+ unsigned int canon_column;
+
+ struct mutex atomic_read_lock;
+ struct mutex output_lock;
+ struct mutex echo_lock;
+ spinlock_t read_lock;
+};
+
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
unsigned char __user *ptr)
{
- tty_audit_add_data(tty, &x, 1);
+ struct n_tty_data *ldata = tty->disc_data;
+
+ tty_audit_add_data(tty, &x, 1, ldata->icanon);
return put_user(x, ptr);
}
static void n_tty_set_room(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int left;
int old_left;
- /* tty->read_cnt is not read locked ? */
+ /* ldata->read_cnt is not read locked ? */
if (I_PARMRK(tty)) {
/* Multiply read_cnt by 3, since each byte might take up to
* three times as many spaces when PARMRK is set (depending on
* its flags, e.g. parity error). */
- left = N_TTY_BUF_SIZE - tty->read_cnt * 3 - 1;
+ left = N_TTY_BUF_SIZE - ldata->read_cnt * 3 - 1;
} else
- left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+ left = N_TTY_BUF_SIZE - ldata->read_cnt - 1;
/*
* If we are doing input canonicalization, and there are no
* characters will be beeped.
*/
if (left <= 0)
- left = tty->icanon && !tty->canon_data;
+ left = ldata->icanon && !ldata->canon_data;
old_left = tty->receive_room;
tty->receive_room = left;
/* Did this open up the receive buffer? We may need to flip */
- if (left && !old_left)
- schedule_work(&tty->buf.work);
+ if (left && !old_left) {
+ WARN_RATELIMIT(tty->port->itty == NULL,
+ "scheduling with invalid itty");
+ schedule_work(&tty->port->buf.work);
+ }
}
-static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
+static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
{
- if (tty->read_cnt < N_TTY_BUF_SIZE) {
- tty->read_buf[tty->read_head] = c;
- tty->read_head = (tty->read_head + 1) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt++;
+ if (ldata->read_cnt < N_TTY_BUF_SIZE) {
+ ldata->read_buf[ldata->read_head] = c;
+ ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt++;
}
}
/**
* put_tty_queue - add character to tty
* @c: character
- * @tty: tty device
+ * @ldata: n_tty data
*
* Add a character to the tty read_buf queue. This is done under the
* read_lock to serialize character addition and also to protect us
* against parallel reads or flushes
*/
-static void put_tty_queue(unsigned char c, struct tty_struct *tty)
+static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
{
unsigned long flags;
/*
* The problem of stomping on the buffers ends here.
* Why didn't anyone see this one coming? --AJK
*/
- spin_lock_irqsave(&tty->read_lock, flags);
- put_tty_queue_nolock(c, tty);
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ put_tty_queue_nolock(c, ldata);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
}
/**
static void reset_buffer_flags(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_head = tty->read_tail = tty->read_cnt = 0;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_head = ldata->read_tail = ldata->read_cnt = 0;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
- mutex_lock(&tty->echo_lock);
- tty->echo_pos = tty->echo_cnt = tty->echo_overrun = 0;
- mutex_unlock(&tty->echo_lock);
+ mutex_lock(&ldata->echo_lock);
+ ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
+ mutex_unlock(&ldata->echo_lock);
- tty->canon_head = tty->canon_data = tty->erasing = 0;
- memset(&tty->read_flags, 0, sizeof tty->read_flags);
+ ldata->canon_head = ldata->canon_data = ldata->erasing = 0;
+ bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
n_tty_set_room(tty);
}
static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
ssize_t n = 0;
- spin_lock_irqsave(&tty->read_lock, flags);
- if (!tty->icanon) {
- n = tty->read_cnt;
- } else if (tty->canon_data) {
- n = (tty->canon_head > tty->read_tail) ?
- tty->canon_head - tty->read_tail :
- tty->canon_head + (N_TTY_BUF_SIZE - tty->read_tail);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ if (!ldata->icanon) {
+ n = ldata->read_cnt;
+ } else if (ldata->canon_data) {
+ n = (ldata->canon_head > ldata->read_tail) ?
+ ldata->canon_head - ldata->read_tail :
+ ldata->canon_head + (N_TTY_BUF_SIZE - ldata->read_tail);
}
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
return n;
}
static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
{
+ struct n_tty_data *ldata = tty->disc_data;
int spaces;
if (!space)
switch (c) {
case '\n':
if (O_ONLRET(tty))
- tty->column = 0;
+ ldata->column = 0;
if (O_ONLCR(tty)) {
if (space < 2)
return -1;
- tty->canon_column = tty->column = 0;
+ ldata->canon_column = ldata->column = 0;
tty->ops->write(tty, "\r\n", 2);
return 2;
}
- tty->canon_column = tty->column;
+ ldata->canon_column = ldata->column;
break;
case '\r':
- if (O_ONOCR(tty) && tty->column == 0)
+ if (O_ONOCR(tty) && ldata->column == 0)
return 0;
if (O_OCRNL(tty)) {
c = '\n';
if (O_ONLRET(tty))
- tty->canon_column = tty->column = 0;
+ ldata->canon_column = ldata->column = 0;
break;
}
- tty->canon_column = tty->column = 0;
+ ldata->canon_column = ldata->column = 0;
break;
case '\t':
- spaces = 8 - (tty->column & 7);
+ spaces = 8 - (ldata->column & 7);
if (O_TABDLY(tty) == XTABS) {
if (space < spaces)
return -1;
- tty->column += spaces;
+ ldata->column += spaces;
tty->ops->write(tty, " ", spaces);
return spaces;
}
- tty->column += spaces;
+ ldata->column += spaces;
break;
case '\b':
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
break;
default:
if (!iscntrl(c)) {
if (O_OLCUC(tty))
c = toupper(c);
if (!is_continuation(c, tty))
- tty->column++;
+ ldata->column++;
}
break;
}
static int process_output(unsigned char c, struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int space, retval;
- mutex_lock(&tty->output_lock);
+ mutex_lock(&ldata->output_lock);
space = tty_write_room(tty);
retval = do_output_char(c, tty, space);
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->output_lock);
if (retval < 0)
return -1;
else
static ssize_t process_output_block(struct tty_struct *tty,
const unsigned char *buf, unsigned int nr)
{
+ struct n_tty_data *ldata = tty->disc_data;
int space;
int i;
const unsigned char *cp;
- mutex_lock(&tty->output_lock);
+ mutex_lock(&ldata->output_lock);
space = tty_write_room(tty);
if (!space) {
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->output_lock);
return 0;
}
if (nr > space)
switch (c) {
case '\n':
if (O_ONLRET(tty))
- tty->column = 0;
+ ldata->column = 0;
if (O_ONLCR(tty))
goto break_out;
- tty->canon_column = tty->column;
+ ldata->canon_column = ldata->column;
break;
case '\r':
- if (O_ONOCR(tty) && tty->column == 0)
+ if (O_ONOCR(tty) && ldata->column == 0)
goto break_out;
if (O_OCRNL(tty))
goto break_out;
- tty->canon_column = tty->column = 0;
+ ldata->canon_column = ldata->column = 0;
break;
case '\t':
goto break_out;
case '\b':
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
break;
default:
if (!iscntrl(c)) {
if (O_OLCUC(tty))
goto break_out;
if (!is_continuation(c, tty))
- tty->column++;
+ ldata->column++;
}
break;
}
break_out:
i = tty->ops->write(tty, buf, i);
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->output_lock);
return i;
}
static void process_echoes(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int space, nr;
unsigned char c;
unsigned char *cp, *buf_end;
- if (!tty->echo_cnt)
+ if (!ldata->echo_cnt)
return;
- mutex_lock(&tty->output_lock);
- mutex_lock(&tty->echo_lock);
+ mutex_lock(&ldata->output_lock);
+ mutex_lock(&ldata->echo_lock);
space = tty_write_room(tty);
- buf_end = tty->echo_buf + N_TTY_BUF_SIZE;
- cp = tty->echo_buf + tty->echo_pos;
- nr = tty->echo_cnt;
+ buf_end = ldata->echo_buf + N_TTY_BUF_SIZE;
+ cp = ldata->echo_buf + ldata->echo_pos;
+ nr = ldata->echo_cnt;
while (nr > 0) {
c = *cp;
if (c == ECHO_OP_START) {
* Otherwise, tab spacing is normal.
*/
if (!(num_chars & 0x80))
- num_chars += tty->canon_column;
+ num_chars += ldata->canon_column;
num_bs = 8 - (num_chars & 7);
if (num_bs > space) {
space -= num_bs;
while (num_bs--) {
tty_put_char(tty, '\b');
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
}
cp += 3;
nr -= 3;
break;
case ECHO_OP_SET_CANON_COL:
- tty->canon_column = tty->column;
+ ldata->canon_column = ldata->column;
cp += 2;
nr -= 2;
break;
case ECHO_OP_MOVE_BACK_COL:
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
cp += 2;
nr -= 2;
break;
break;
}
tty_put_char(tty, ECHO_OP_START);
- tty->column++;
+ ldata->column++;
space--;
cp += 2;
nr -= 2;
}
tty_put_char(tty, '^');
tty_put_char(tty, op ^ 0100);
- tty->column += 2;
+ ldata->column += 2;
space -= 2;
cp += 2;
nr -= 2;
}
if (nr == 0) {
- tty->echo_pos = 0;
- tty->echo_cnt = 0;
- tty->echo_overrun = 0;
+ ldata->echo_pos = 0;
+ ldata->echo_cnt = 0;
+ ldata->echo_overrun = 0;
} else {
- int num_processed = tty->echo_cnt - nr;
- tty->echo_pos += num_processed;
- tty->echo_pos &= N_TTY_BUF_SIZE - 1;
- tty->echo_cnt = nr;
+ int num_processed = ldata->echo_cnt - nr;
+ ldata->echo_pos += num_processed;
+ ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
+ ldata->echo_cnt = nr;
if (num_processed > 0)
- tty->echo_overrun = 0;
+ ldata->echo_overrun = 0;
}
- mutex_unlock(&tty->echo_lock);
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->echo_lock);
+ mutex_unlock(&ldata->output_lock);
if (tty->ops->flush_chars)
tty->ops->flush_chars(tty);
/**
* add_echo_byte - add a byte to the echo buffer
* @c: unicode byte to echo
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add a character or operation byte to the echo buffer.
*
* Should be called under the echo lock to protect the echo buffer.
*/
-static void add_echo_byte(unsigned char c, struct tty_struct *tty)
+static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
{
int new_byte_pos;
- if (tty->echo_cnt == N_TTY_BUF_SIZE) {
+ if (ldata->echo_cnt == N_TTY_BUF_SIZE) {
/* Circular buffer is already at capacity */
- new_byte_pos = tty->echo_pos;
+ new_byte_pos = ldata->echo_pos;
/*
* Since the buffer start position needs to be advanced,
* be sure to step by a whole operation byte group.
*/
- if (tty->echo_buf[tty->echo_pos] == ECHO_OP_START) {
- if (tty->echo_buf[(tty->echo_pos + 1) &
+ if (ldata->echo_buf[ldata->echo_pos] == ECHO_OP_START) {
+ if (ldata->echo_buf[(ldata->echo_pos + 1) &
(N_TTY_BUF_SIZE - 1)] ==
ECHO_OP_ERASE_TAB) {
- tty->echo_pos += 3;
- tty->echo_cnt -= 2;
+ ldata->echo_pos += 3;
+ ldata->echo_cnt -= 2;
} else {
- tty->echo_pos += 2;
- tty->echo_cnt -= 1;
+ ldata->echo_pos += 2;
+ ldata->echo_cnt -= 1;
}
} else {
- tty->echo_pos++;
+ ldata->echo_pos++;
}
- tty->echo_pos &= N_TTY_BUF_SIZE - 1;
+ ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
- tty->echo_overrun = 1;
+ ldata->echo_overrun = 1;
} else {
- new_byte_pos = tty->echo_pos + tty->echo_cnt;
+ new_byte_pos = ldata->echo_pos + ldata->echo_cnt;
new_byte_pos &= N_TTY_BUF_SIZE - 1;
- tty->echo_cnt++;
+ ldata->echo_cnt++;
}
- tty->echo_buf[new_byte_pos] = c;
+ ldata->echo_buf[new_byte_pos] = c;
}
/**
* echo_move_back_col - add operation to move back a column
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add an operation to the echo buffer to move back one column.
*
* Locking: echo_lock to protect the echo buffer
*/
-static void echo_move_back_col(struct tty_struct *tty)
+static void echo_move_back_col(struct n_tty_data *ldata)
{
- mutex_lock(&tty->echo_lock);
-
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_MOVE_BACK_COL, tty);
-
- mutex_unlock(&tty->echo_lock);
+ mutex_lock(&ldata->echo_lock);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_MOVE_BACK_COL, ldata);
+ mutex_unlock(&ldata->echo_lock);
}
/**
* echo_set_canon_col - add operation to set the canon column
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add an operation to the echo buffer to set the canon column
* to the current column.
* Locking: echo_lock to protect the echo buffer
*/
-static void echo_set_canon_col(struct tty_struct *tty)
+static void echo_set_canon_col(struct n_tty_data *ldata)
{
- mutex_lock(&tty->echo_lock);
-
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_SET_CANON_COL, tty);
-
- mutex_unlock(&tty->echo_lock);
+ mutex_lock(&ldata->echo_lock);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_SET_CANON_COL, ldata);
+ mutex_unlock(&ldata->echo_lock);
}
/**
* echo_erase_tab - add operation to erase a tab
* @num_chars: number of character columns already used
* @after_tab: true if num_chars starts after a previous tab
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add an operation to the echo buffer to erase a tab.
*
*/
static void echo_erase_tab(unsigned int num_chars, int after_tab,
- struct tty_struct *tty)
+ struct n_tty_data *ldata)
{
- mutex_lock(&tty->echo_lock);
+ mutex_lock(&ldata->echo_lock);
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_ERASE_TAB, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_ERASE_TAB, ldata);
/* We only need to know this modulo 8 (tab spacing) */
num_chars &= 7;
if (after_tab)
num_chars |= 0x80;
- add_echo_byte(num_chars, tty);
+ add_echo_byte(num_chars, ldata);
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
* Locking: echo_lock to protect the echo buffer
*/
-static void echo_char_raw(unsigned char c, struct tty_struct *tty)
+static void echo_char_raw(unsigned char c, struct n_tty_data *ldata)
{
- mutex_lock(&tty->echo_lock);
-
+ mutex_lock(&ldata->echo_lock);
if (c == ECHO_OP_START) {
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_START, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_START, ldata);
} else {
- add_echo_byte(c, tty);
+ add_echo_byte(c, ldata);
}
-
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
static void echo_char(unsigned char c, struct tty_struct *tty)
{
- mutex_lock(&tty->echo_lock);
+ struct n_tty_data *ldata = tty->disc_data;
+
+ mutex_lock(&ldata->echo_lock);
if (c == ECHO_OP_START) {
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_START, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_START, ldata);
} else {
if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t')
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(c, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(c, ldata);
}
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
* finish_erasing - complete erase
- * @tty: tty doing the erase
+ * @ldata: n_tty data
*/
-static inline void finish_erasing(struct tty_struct *tty)
+static inline void finish_erasing(struct n_tty_data *ldata)
{
- if (tty->erasing) {
- echo_char_raw('/', tty);
- tty->erasing = 0;
+ if (ldata->erasing) {
+ echo_char_raw('/', ldata);
+ ldata->erasing = 0;
}
}
static void eraser(unsigned char c, struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
enum { ERASE, WERASE, KILL } kill_type;
int head, seen_alnums, cnt;
unsigned long flags;
/* FIXME: locking needed ? */
- if (tty->read_head == tty->canon_head) {
+ if (ldata->read_head == ldata->canon_head) {
/* process_output('\a', tty); */ /* what do you think? */
return;
}
kill_type = WERASE;
else {
if (!L_ECHO(tty)) {
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_cnt -= ((tty->read_head - tty->canon_head) &
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
(N_TTY_BUF_SIZE - 1));
- tty->read_head = tty->canon_head;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ ldata->read_head = ldata->canon_head;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
return;
}
if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) {
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_cnt -= ((tty->read_head - tty->canon_head) &
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
(N_TTY_BUF_SIZE - 1));
- tty->read_head = tty->canon_head;
- spin_unlock_irqrestore(&tty->read_lock, flags);
- finish_erasing(tty);
+ ldata->read_head = ldata->canon_head;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
+ finish_erasing(ldata);
echo_char(KILL_CHAR(tty), tty);
/* Add a newline if ECHOK is on and ECHOKE is off. */
if (L_ECHOK(tty))
- echo_char_raw('\n', tty);
+ echo_char_raw('\n', ldata);
return;
}
kill_type = KILL;
seen_alnums = 0;
/* FIXME: Locking ?? */
- while (tty->read_head != tty->canon_head) {
- head = tty->read_head;
+ while (ldata->read_head != ldata->canon_head) {
+ head = ldata->read_head;
/* erase a single possibly multibyte character */
do {
head = (head - 1) & (N_TTY_BUF_SIZE-1);
- c = tty->read_buf[head];
- } while (is_continuation(c, tty) && head != tty->canon_head);
+ c = ldata->read_buf[head];
+ } while (is_continuation(c, tty) && head != ldata->canon_head);
/* do not partially erase */
if (is_continuation(c, tty))
else if (seen_alnums)
break;
}
- cnt = (tty->read_head - head) & (N_TTY_BUF_SIZE-1);
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_head = head;
- tty->read_cnt -= cnt;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ cnt = (ldata->read_head - head) & (N_TTY_BUF_SIZE-1);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_head = head;
+ ldata->read_cnt -= cnt;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (L_ECHO(tty)) {
if (L_ECHOPRT(tty)) {
- if (!tty->erasing) {
- echo_char_raw('\\', tty);
- tty->erasing = 1;
+ if (!ldata->erasing) {
+ echo_char_raw('\\', ldata);
+ ldata->erasing = 1;
}
/* if cnt > 1, output a multi-byte character */
echo_char(c, tty);
while (--cnt > 0) {
head = (head+1) & (N_TTY_BUF_SIZE-1);
- echo_char_raw(tty->read_buf[head], tty);
- echo_move_back_col(tty);
+ echo_char_raw(ldata->read_buf[head],
+ ldata);
+ echo_move_back_col(ldata);
}
} else if (kill_type == ERASE && !L_ECHOE(tty)) {
echo_char(ERASE_CHAR(tty), tty);
} else if (c == '\t') {
unsigned int num_chars = 0;
int after_tab = 0;
- unsigned long tail = tty->read_head;
+ unsigned long tail = ldata->read_head;
/*
* Count the columns used for characters
* This info is used to go back the correct
* number of columns.
*/
- while (tail != tty->canon_head) {
+ while (tail != ldata->canon_head) {
tail = (tail-1) & (N_TTY_BUF_SIZE-1);
- c = tty->read_buf[tail];
+ c = ldata->read_buf[tail];
if (c == '\t') {
after_tab = 1;
break;
num_chars++;
}
}
- echo_erase_tab(num_chars, after_tab, tty);
+ echo_erase_tab(num_chars, after_tab, ldata);
} else {
if (iscntrl(c) && L_ECHOCTL(tty)) {
- echo_char_raw('\b', tty);
- echo_char_raw(' ', tty);
- echo_char_raw('\b', tty);
+ echo_char_raw('\b', ldata);
+ echo_char_raw(' ', ldata);
+ echo_char_raw('\b', ldata);
}
if (!iscntrl(c) || L_ECHOCTL(tty)) {
- echo_char_raw('\b', tty);
- echo_char_raw(' ', tty);
- echo_char_raw('\b', tty);
+ echo_char_raw('\b', ldata);
+ echo_char_raw(' ', ldata);
+ echo_char_raw('\b', ldata);
}
}
}
if (kill_type == ERASE)
break;
}
- if (tty->read_head == tty->canon_head && L_ECHO(tty))
- finish_erasing(tty);
+ if (ldata->read_head == ldata->canon_head && L_ECHO(tty))
+ finish_erasing(ldata);
}
/**
static inline void n_tty_receive_break(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
if (I_IGNBRK(tty))
return;
if (I_BRKINT(tty)) {
return;
}
if (I_PARMRK(tty)) {
- put_tty_queue('\377', tty);
- put_tty_queue('\0', tty);
+ put_tty_queue('\377', ldata);
+ put_tty_queue('\0', ldata);
}
- put_tty_queue('\0', tty);
+ put_tty_queue('\0', ldata);
wake_up_interruptible(&tty->read_wait);
}
static inline void n_tty_receive_overrun(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
char buf[64];
- tty->num_overrun++;
- if (time_before(tty->overrun_time, jiffies - HZ) ||
- time_after(tty->overrun_time, jiffies)) {
+ ldata->num_overrun++;
+ if (time_after(jiffies, ldata->overrun_time + HZ) ||
+ time_after(ldata->overrun_time, jiffies)) {
printk(KERN_WARNING "%s: %d input overrun(s)\n",
tty_name(tty, buf),
- tty->num_overrun);
- tty->overrun_time = jiffies;
- tty->num_overrun = 0;
+ ldata->num_overrun);
+ ldata->overrun_time = jiffies;
+ ldata->num_overrun = 0;
}
}
static inline void n_tty_receive_parity_error(struct tty_struct *tty,
unsigned char c)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
if (I_IGNPAR(tty))
return;
if (I_PARMRK(tty)) {
- put_tty_queue('\377', tty);
- put_tty_queue('\0', tty);
- put_tty_queue(c, tty);
+ put_tty_queue('\377', ldata);
+ put_tty_queue('\0', ldata);
+ put_tty_queue(c, ldata);
} else if (I_INPCK(tty))
- put_tty_queue('\0', tty);
+ put_tty_queue('\0', ldata);
else
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
wake_up_interruptible(&tty->read_wait);
}
static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
int parmrk;
- if (tty->raw) {
- put_tty_queue(c, tty);
+ if (ldata->raw) {
+ put_tty_queue(c, ldata);
return;
}
c = tolower(c);
if (L_EXTPROC(tty)) {
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
return;
}
* handle specially, do shortcut processing to speed things
* up.
*/
- if (!test_bit(c, tty->process_char_map) || tty->lnext) {
- tty->lnext = 0;
+ if (!test_bit(c, ldata->process_char_map) || ldata->lnext) {
+ ldata->lnext = 0;
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
if (L_ECHO(tty))
process_output('\a', tty);
return;
}
if (L_ECHO(tty)) {
- finish_erasing(tty);
+ finish_erasing(ldata);
/* Record the column of first canon char. */
- if (tty->canon_head == tty->read_head)
- echo_set_canon_col(tty);
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
echo_char(c, tty);
process_echoes(tty);
}
if (parmrk)
- put_tty_queue(c, tty);
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
+ put_tty_queue(c, ldata);
return;
}
} else if (c == '\n' && I_INLCR(tty))
c = '\r';
- if (tty->icanon) {
+ if (ldata->icanon) {
if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) ||
(c == WERASE_CHAR(tty) && L_IEXTEN(tty))) {
eraser(c, tty);
return;
}
if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
- tty->lnext = 1;
+ ldata->lnext = 1;
if (L_ECHO(tty)) {
- finish_erasing(tty);
+ finish_erasing(ldata);
if (L_ECHOCTL(tty)) {
- echo_char_raw('^', tty);
- echo_char_raw('\b', tty);
+ echo_char_raw('^', ldata);
+ echo_char_raw('\b', ldata);
process_echoes(tty);
}
}
}
if (c == REPRINT_CHAR(tty) && L_ECHO(tty) &&
L_IEXTEN(tty)) {
- unsigned long tail = tty->canon_head;
+ unsigned long tail = ldata->canon_head;
- finish_erasing(tty);
+ finish_erasing(ldata);
echo_char(c, tty);
- echo_char_raw('\n', tty);
- while (tail != tty->read_head) {
- echo_char(tty->read_buf[tail], tty);
+ echo_char_raw('\n', ldata);
+ while (tail != ldata->read_head) {
+ echo_char(ldata->read_buf[tail], tty);
tail = (tail+1) & (N_TTY_BUF_SIZE-1);
}
process_echoes(tty);
return;
}
if (c == '\n') {
- if (tty->read_cnt >= N_TTY_BUF_SIZE) {
+ if (ldata->read_cnt >= N_TTY_BUF_SIZE) {
if (L_ECHO(tty))
process_output('\a', tty);
return;
}
if (L_ECHO(tty) || L_ECHONL(tty)) {
- echo_char_raw('\n', tty);
+ echo_char_raw('\n', ldata);
process_echoes(tty);
}
goto handle_newline;
}
if (c == EOF_CHAR(tty)) {
- if (tty->read_cnt >= N_TTY_BUF_SIZE)
+ if (ldata->read_cnt >= N_TTY_BUF_SIZE)
return;
- if (tty->canon_head != tty->read_head)
+ if (ldata->canon_head != ldata->read_head)
set_bit(TTY_PUSH, &tty->flags);
c = __DISABLED_CHAR;
goto handle_newline;
(c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty))
? 1 : 0;
- if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
+ if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
if (L_ECHO(tty))
process_output('\a', tty);
return;
*/
if (L_ECHO(tty)) {
/* Record the column of first canon char. */
- if (tty->canon_head == tty->read_head)
- echo_set_canon_col(tty);
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
echo_char(c, tty);
process_echoes(tty);
}
* EOL_CHAR and EOL2_CHAR?
*/
if (parmrk)
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
handle_newline:
- spin_lock_irqsave(&tty->read_lock, flags);
- set_bit(tty->read_head, tty->read_flags);
- put_tty_queue_nolock(c, tty);
- tty->canon_head = tty->read_head;
- tty->canon_data++;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ set_bit(ldata->read_head, ldata->read_flags);
+ put_tty_queue_nolock(c, ldata);
+ ldata->canon_head = ldata->read_head;
+ ldata->canon_data++;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible(&tty->read_wait);
}
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
if (L_ECHO(tty))
process_output('\a', tty);
return;
}
if (L_ECHO(tty)) {
- finish_erasing(tty);
+ finish_erasing(ldata);
if (c == '\n')
- echo_char_raw('\n', tty);
+ echo_char_raw('\n', ldata);
else {
/* Record the column of first canon char. */
- if (tty->canon_head == tty->read_head)
- echo_set_canon_col(tty);
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
echo_char(c, tty);
}
process_echoes(tty);
}
if (parmrk)
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
}
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ struct n_tty_data *ldata = tty->disc_data;
const unsigned char *p;
char *f, flags = TTY_NORMAL;
int i;
char buf[64];
unsigned long cpuflags;
- if (!tty->read_buf)
- return;
-
- if (tty->real_raw) {
- spin_lock_irqsave(&tty->read_lock, cpuflags);
- i = min(N_TTY_BUF_SIZE - tty->read_cnt,
- N_TTY_BUF_SIZE - tty->read_head);
+ if (ldata->real_raw) {
+ spin_lock_irqsave(&ldata->read_lock, cpuflags);
+ i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+ N_TTY_BUF_SIZE - ldata->read_head);
i = min(count, i);
- memcpy(tty->read_buf + tty->read_head, cp, i);
- tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt += i;
+ memcpy(ldata->read_buf + ldata->read_head, cp, i);
+ ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt += i;
cp += i;
count -= i;
- i = min(N_TTY_BUF_SIZE - tty->read_cnt,
- N_TTY_BUF_SIZE - tty->read_head);
+ i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+ N_TTY_BUF_SIZE - ldata->read_head);
i = min(count, i);
- memcpy(tty->read_buf + tty->read_head, cp, i);
- tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt += i;
- spin_unlock_irqrestore(&tty->read_lock, cpuflags);
+ memcpy(ldata->read_buf + ldata->read_head, cp, i);
+ ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt += i;
+ spin_unlock_irqrestore(&ldata->read_lock, cpuflags);
} else {
for (i = count, p = cp, f = fp; i; i--, p++) {
if (f)
n_tty_set_room(tty);
- if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) ||
+ if ((!ldata->icanon && (ldata->read_cnt >= tty->minimum_to_wake)) ||
L_EXTPROC(tty)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
{
+ struct n_tty_data *ldata = tty->disc_data;
int canon_change = 1;
- BUG_ON(!tty);
if (old)
canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
if (canon_change) {
- memset(&tty->read_flags, 0, sizeof tty->read_flags);
- tty->canon_head = tty->read_tail;
- tty->canon_data = 0;
- tty->erasing = 0;
+ bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
+ ldata->canon_head = ldata->read_tail;
+ ldata->canon_data = 0;
+ ldata->erasing = 0;
}
- if (canon_change && !L_ICANON(tty) && tty->read_cnt)
+ if (canon_change && !L_ICANON(tty) && ldata->read_cnt)
wake_up_interruptible(&tty->read_wait);
- tty->icanon = (L_ICANON(tty) != 0);
+ ldata->icanon = (L_ICANON(tty) != 0);
if (test_bit(TTY_HW_COOK_IN, &tty->flags)) {
- tty->raw = 1;
- tty->real_raw = 1;
+ ldata->raw = 1;
+ ldata->real_raw = 1;
n_tty_set_room(tty);
return;
}
I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) ||
I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) ||
I_PARMRK(tty)) {
- memset(tty->process_char_map, 0, 256/8);
+ bitmap_zero(ldata->process_char_map, 256);
if (I_IGNCR(tty) || I_ICRNL(tty))
- set_bit('\r', tty->process_char_map);
+ set_bit('\r', ldata->process_char_map);
if (I_INLCR(tty))
- set_bit('\n', tty->process_char_map);
+ set_bit('\n', ldata->process_char_map);
if (L_ICANON(tty)) {
- set_bit(ERASE_CHAR(tty), tty->process_char_map);
- set_bit(KILL_CHAR(tty), tty->process_char_map);
- set_bit(EOF_CHAR(tty), tty->process_char_map);
- set_bit('\n', tty->process_char_map);
- set_bit(EOL_CHAR(tty), tty->process_char_map);
+ set_bit(ERASE_CHAR(tty), ldata->process_char_map);
+ set_bit(KILL_CHAR(tty), ldata->process_char_map);
+ set_bit(EOF_CHAR(tty), ldata->process_char_map);
+ set_bit('\n', ldata->process_char_map);
+ set_bit(EOL_CHAR(tty), ldata->process_char_map);
if (L_IEXTEN(tty)) {
set_bit(WERASE_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
set_bit(LNEXT_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
set_bit(EOL2_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
if (L_ECHO(tty))
set_bit(REPRINT_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
}
}
if (I_IXON(tty)) {
- set_bit(START_CHAR(tty), tty->process_char_map);
- set_bit(STOP_CHAR(tty), tty->process_char_map);
+ set_bit(START_CHAR(tty), ldata->process_char_map);
+ set_bit(STOP_CHAR(tty), ldata->process_char_map);
}
if (L_ISIG(tty)) {
- set_bit(INTR_CHAR(tty), tty->process_char_map);
- set_bit(QUIT_CHAR(tty), tty->process_char_map);
- set_bit(SUSP_CHAR(tty), tty->process_char_map);
+ set_bit(INTR_CHAR(tty), ldata->process_char_map);
+ set_bit(QUIT_CHAR(tty), ldata->process_char_map);
+ set_bit(SUSP_CHAR(tty), ldata->process_char_map);
}
- clear_bit(__DISABLED_CHAR, tty->process_char_map);
- tty->raw = 0;
- tty->real_raw = 0;
+ clear_bit(__DISABLED_CHAR, ldata->process_char_map);
+ ldata->raw = 0;
+ ldata->real_raw = 0;
} else {
- tty->raw = 1;
+ ldata->raw = 1;
if ((I_IGNBRK(tty) || (!I_BRKINT(tty) && !I_PARMRK(tty))) &&
(I_IGNPAR(tty) || !I_INPCK(tty)) &&
(tty->driver->flags & TTY_DRIVER_REAL_RAW))
- tty->real_raw = 1;
+ ldata->real_raw = 1;
else
- tty->real_raw = 0;
+ ldata->real_raw = 0;
}
n_tty_set_room(tty);
/* The termios change make the tty ready for I/O */
static void n_tty_close(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
n_tty_flush_buffer(tty);
- if (tty->read_buf) {
- kfree(tty->read_buf);
- tty->read_buf = NULL;
- }
- if (tty->echo_buf) {
- kfree(tty->echo_buf);
- tty->echo_buf = NULL;
- }
+ kfree(ldata->read_buf);
+ kfree(ldata->echo_buf);
+ kfree(ldata);
+ tty->disc_data = NULL;
}
/**
static int n_tty_open(struct tty_struct *tty)
{
- if (!tty)
- return -EINVAL;
+ struct n_tty_data *ldata;
+
+ ldata = kzalloc(sizeof(*ldata), GFP_KERNEL);
+ if (!ldata)
+ goto err;
+
+ ldata->overrun_time = jiffies;
+ mutex_init(&ldata->atomic_read_lock);
+ mutex_init(&ldata->output_lock);
+ mutex_init(&ldata->echo_lock);
+ spin_lock_init(&ldata->read_lock);
/* These are ugly. Currently a malloc failure here can panic */
- if (!tty->read_buf) {
- tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
- if (!tty->read_buf)
- return -ENOMEM;
- }
- if (!tty->echo_buf) {
- tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ ldata->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ if (!ldata->read_buf || !ldata->echo_buf)
+ goto err_free_bufs;
- if (!tty->echo_buf)
- return -ENOMEM;
- }
+ tty->disc_data = ldata;
reset_buffer_flags(tty);
tty_unthrottle(tty);
- tty->column = 0;
+ ldata->column = 0;
n_tty_set_termios(tty, NULL);
tty->minimum_to_wake = 1;
tty->closing = 0;
+
return 0;
+err_free_bufs:
+ kfree(ldata->read_buf);
+ kfree(ldata->echo_buf);
+ kfree(ldata);
+err:
+ return -ENOMEM;
}
static inline int input_available_p(struct tty_struct *tty, int amt)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
tty_flush_to_ldisc(tty);
- if (tty->icanon && !L_EXTPROC(tty)) {
- if (tty->canon_data)
+ if (ldata->icanon && !L_EXTPROC(tty)) {
+ if (ldata->canon_data)
return 1;
- } else if (tty->read_cnt >= (amt ? amt : 1))
+ } else if (ldata->read_cnt >= (amt ? amt : 1))
return 1;
return 0;
* buffer, and once to drain the space from the (physical) beginning of
* the buffer to head pointer.
*
- * Called under the tty->atomic_read_lock sem
+ * Called under the ldata->atomic_read_lock sem
*
*/
size_t *nr)
{
+ struct n_tty_data *ldata = tty->disc_data;
int retval;
size_t n;
unsigned long flags;
bool is_eof;
retval = 0;
- spin_lock_irqsave(&tty->read_lock, flags);
- n = min(tty->read_cnt, N_TTY_BUF_SIZE - tty->read_tail);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ n = min(ldata->read_cnt, N_TTY_BUF_SIZE - ldata->read_tail);
n = min(*nr, n);
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (n) {
- retval = copy_to_user(*b, &tty->read_buf[tty->read_tail], n);
+ retval = copy_to_user(*b, &ldata->read_buf[ldata->read_tail], n);
n -= retval;
is_eof = n == 1 &&
- tty->read_buf[tty->read_tail] == EOF_CHAR(tty);
- tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n);
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt -= n;
+ ldata->read_buf[ldata->read_tail] == EOF_CHAR(tty);
+ tty_audit_add_data(tty, &ldata->read_buf[ldata->read_tail], n,
+ ldata->icanon);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt -= n;
/* Turn single EOF into zero-length read */
- if (L_EXTPROC(tty) && tty->icanon && is_eof && !tty->read_cnt)
+ if (L_EXTPROC(tty) && ldata->icanon && is_eof && !ldata->read_cnt)
n = 0;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
*b += n;
*nr -= n;
}
static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
unsigned char __user *buf, size_t nr)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned char __user *b = buf;
DECLARE_WAITQUEUE(wait, current);
int c;
int packet;
do_it_again:
-
- if (WARN_ON(!tty->read_buf))
- return -EAGAIN;
-
c = job_control(tty, file);
if (c < 0)
return c;
minimum = time = 0;
timeout = MAX_SCHEDULE_TIMEOUT;
- if (!tty->icanon) {
+ if (!ldata->icanon) {
time = (HZ / 10) * TIME_CHAR(tty);
minimum = MIN_CHAR(tty);
if (minimum) {
* Internal serialization of reads.
*/
if (file->f_flags & O_NONBLOCK) {
- if (!mutex_trylock(&tty->atomic_read_lock))
+ if (!mutex_trylock(&ldata->atomic_read_lock))
return -EAGAIN;
} else {
- if (mutex_lock_interruptible(&tty->atomic_read_lock))
+ if (mutex_lock_interruptible(&ldata->atomic_read_lock))
return -ERESTARTSYS;
}
packet = tty->packet;
/* FIXME: does n_tty_set_room need locking ? */
n_tty_set_room(tty);
timeout = schedule_timeout(timeout);
- BUG_ON(!tty->read_buf);
continue;
}
__set_current_state(TASK_RUNNING);
nr--;
}
- if (tty->icanon && !L_EXTPROC(tty)) {
+ if (ldata->icanon && !L_EXTPROC(tty)) {
/* N.B. avoid overrun if nr == 0 */
- spin_lock_irqsave(&tty->read_lock, flags);
- while (nr && tty->read_cnt) {
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ while (nr && ldata->read_cnt) {
int eol;
- eol = test_and_clear_bit(tty->read_tail,
- tty->read_flags);
- c = tty->read_buf[tty->read_tail];
- tty->read_tail = ((tty->read_tail+1) &
+ eol = test_and_clear_bit(ldata->read_tail,
+ ldata->read_flags);
+ c = ldata->read_buf[ldata->read_tail];
+ ldata->read_tail = ((ldata->read_tail+1) &
(N_TTY_BUF_SIZE-1));
- tty->read_cnt--;
+ ldata->read_cnt--;
if (eol) {
/* this test should be redundant:
* we shouldn't be reading data if
* canon_data is 0
*/
- if (--tty->canon_data < 0)
- tty->canon_data = 0;
+ if (--ldata->canon_data < 0)
+ ldata->canon_data = 0;
}
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (!eol || (c != __DISABLED_CHAR)) {
if (tty_put_user(tty, c, b++)) {
retval = -EFAULT;
b--;
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
break;
}
nr--;
}
if (eol) {
tty_audit_push(tty);
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
break;
}
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
}
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (retval)
break;
} else {
if (time)
timeout = time;
}
- mutex_unlock(&tty->atomic_read_lock);
+ mutex_unlock(&ldata->atomic_read_lock);
remove_wait_queue(&tty->read_wait, &wait);
if (!waitqueue_active(&tty->read_wait))
return mask;
}
-static unsigned long inq_canon(struct tty_struct *tty)
+static unsigned long inq_canon(struct n_tty_data *ldata)
{
int nr, head, tail;
- if (!tty->canon_data)
+ if (!ldata->canon_data)
return 0;
- head = tty->canon_head;
- tail = tty->read_tail;
+ head = ldata->canon_head;
+ tail = ldata->read_tail;
nr = (head - tail) & (N_TTY_BUF_SIZE-1);
/* Skip EOF-chars.. */
while (head != tail) {
- if (test_bit(tail, tty->read_flags) &&
- tty->read_buf[tail] == __DISABLED_CHAR)
+ if (test_bit(tail, ldata->read_flags) &&
+ ldata->read_buf[tail] == __DISABLED_CHAR)
nr--;
tail = (tail+1) & (N_TTY_BUF_SIZE-1);
}
static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ struct n_tty_data *ldata = tty->disc_data;
int retval;
switch (cmd) {
return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
case TIOCINQ:
/* FIXME: Locking */
- retval = tty->read_cnt;
+ retval = ldata->read_cnt;
if (L_ICANON(tty))
- retval = inq_canon(tty);
+ retval = inq_canon(ldata);
return put_user(retval, (unsigned int __user *) arg);
default:
return n_tty_ioctl_helper(tty, file, cmd, arg);
* Added support for a Unix98-style ptmx device.
* -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
*
- * When reading this code see also fs/devpts. In particular note that the
- * driver_data field is used by the devpts side as a binding to the devpts
- * inode.
*/
#include <linux/module.h>
#ifdef CONFIG_UNIX98_PTYS
if (tty->driver == ptm_driver) {
mutex_lock(&devpts_mutex);
- devpts_pty_kill(tty->link);
+ devpts_pty_kill(tty->link->driver_data);
mutex_unlock(&devpts_mutex);
}
#endif
static int pty_space(struct tty_struct *to)
{
- int n = 8192 - to->buf.memory_used;
+ int n = 8192 - to->port->buf.memory_used;
if (n < 0)
return 0;
return n;
tty_port_init(ports[1]);
o_tty->port = ports[0];
tty->port = ports[1];
+ o_tty->port->itty = o_tty;
tty_driver_kref_get(driver);
tty->count++;
return retval;
}
+/* this is called once with whichever end is closed last */
+static void pty_unix98_shutdown(struct tty_struct *tty)
+{
+ devpts_kill_index(tty->driver_data, tty->index);
+}
+
static void pty_cleanup(struct tty_struct *tty)
{
+ tty->port->itty = NULL;
kfree(tty->port);
}
struct tty_struct *tty;
mutex_lock(&devpts_mutex);
- tty = devpts_get_tty(pts_inode, idx);
+ tty = devpts_get_priv(pts_inode);
mutex_unlock(&devpts_mutex);
/* Master must be open before slave */
if (!tty)
.set_termios = pty_set_termios,
.ioctl = pty_unix98_ioctl,
.resize = pty_resize,
+ .shutdown = pty_unix98_shutdown,
.cleanup = pty_cleanup
};
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
+ .shutdown = pty_unix98_shutdown,
.cleanup = pty_cleanup,
};
static int ptmx_open(struct inode *inode, struct file *filp)
{
struct tty_struct *tty;
+ struct inode *slave_inode;
int retval;
int index;
tty_add_file(tty, filp);
- retval = devpts_pty_new(inode, tty->link);
- if (retval)
+ slave_inode = devpts_pty_new(inode,
+ MKDEV(UNIX98_PTY_SLAVE_MAJOR, index), index,
+ tty->link);
+ if (IS_ERR(slave_inode)) {
+ retval = PTR_ERR(slave_inode);
goto err_release;
+ }
retval = ptm_driver->ops->open(tty, filp);
if (retval)
goto err_release;
tty_unlock(tty);
+ tty->driver_data = inode;
+ tty->link->driver_data = slave_inode;
return 0;
err_release:
tty_unlock(tty);
serial_port_out(port, UART_EFR, efr);
}
-#ifdef CONFIG_ARCH_OMAP1
/* Workaround to enable 115200 baud on OMAP1510 internal ports */
- if (cpu_is_omap1510() && is_omap_port(up)) {
+ if (is_omap1510_8250(up)) {
if (baud == 115200) {
quot = 1;
serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
} else
serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
}
-#endif
/*
* For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
{
if (pt->port.iotype == UPIO_AU)
return 0x1000;
-#ifdef CONFIG_ARCH_OMAP1
- if (is_omap_port(pt))
+ if (is_omap1_8250(pt))
return 0x16 << pt->port.regshift;
-#endif
+
return 8 << pt->port.regshift;
}
static inline void serial8250_pnp_exit(void) { }
#endif
+#ifdef CONFIG_ARCH_OMAP1
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+ int res;
+
+ switch (pt->port.mapbase) {
+ case OMAP1_UART1_BASE:
+ case OMAP1_UART2_BASE:
+ case OMAP1_UART3_BASE:
+ res = 1;
+ break;
+ default:
+ res = 0;
+ break;
+ }
+
+ return res;
+}
+
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+ if (!cpu_is_omap1510())
+ return 0;
+
+ return is_omap1_8250(pt);
+}
+#else
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+ return 0;
+}
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+ return 0;
+}
+#endif
serial_out(port, UART_FCR, 0); /* no fifo */
serial_out(port, UART_MCR, 0x3); /* DTR + RTS */
- divisor = port->uartclk / (16 * device->baud);
+ divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
c = serial_in(port, UART_LCR);
serial_out(port, UART_LCR, c | UART_LCR_DLAB);
serial_out(port, UART_DLL, divisor & 0xff);
switch (level) {
case 3:
if (!IS_ERR(ourport->baudclk))
- clk_disable(ourport->baudclk);
+ clk_disable_unprepare(ourport->baudclk);
- clk_disable(ourport->clk);
+ clk_disable_unprepare(ourport->clk);
break;
case 0:
- clk_enable(ourport->clk);
+ clk_prepare_enable(ourport->clk);
if (!IS_ERR(ourport->baudclk))
- clk_enable(ourport->baudclk);
+ clk_prepare_enable(ourport->baudclk);
break;
default:
s3c24xx_serial_setsource(port, clk_sel);
if (!IS_ERR(ourport->baudclk)) {
- clk_disable(ourport->baudclk);
+ clk_disable_unprepare(ourport->baudclk);
ourport->baudclk = ERR_PTR(-EINVAL);
}
- clk_enable(clk);
+ clk_prepare_enable(clk);
ourport->baudclk = clk;
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (port) {
- clk_enable(ourport->clk);
+ clk_prepare_enable(ourport->clk);
s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
- clk_disable(ourport->clk);
+ clk_disable_unprepare(ourport->clk);
uart_resume_port(&s3c24xx_uart_drv, port);
}
};
static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor,
- int icanon)
+ unsigned icanon)
{
struct tty_audit_buf *buf;
* if TTY auditing is disabled or out of memory. Otherwise, return a new
* reference to the buffer.
*/
-static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty)
+static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty,
+ unsigned icanon)
{
struct tty_audit_buf *buf, *buf2;
buf2 = tty_audit_buf_alloc(tty->driver->major,
tty->driver->minor_start + tty->index,
- tty->icanon);
+ icanon);
if (buf2 == NULL) {
audit_log_lost("out of memory in TTY auditing");
return NULL;
* Audit @data of @size from @tty, if necessary.
*/
void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
- size_t size)
+ size_t size, unsigned icanon)
{
struct tty_audit_buf *buf;
int major, minor;
&& tty->driver->subtype == PTY_TYPE_MASTER)
return;
- buf = tty_audit_buf_get(tty);
+ buf = tty_audit_buf_get(tty, icanon);
if (!buf)
return;
major = tty->driver->major;
minor = tty->driver->minor_start + tty->index;
if (buf->major != major || buf->minor != minor
- || buf->icanon != tty->icanon) {
+ || buf->icanon != icanon) {
tty_audit_buf_push_current(buf);
buf->major = major;
buf->minor = minor;
- buf->icanon = tty->icanon;
+ buf->icanon = icanon;
}
do {
size_t run;
* Locking: none
*/
-void tty_buffer_free_all(struct tty_struct *tty)
+void tty_buffer_free_all(struct tty_port *port)
{
+ struct tty_bufhead *buf = &port->buf;
struct tty_buffer *thead;
- while ((thead = tty->buf.head) != NULL) {
- tty->buf.head = thead->next;
+
+ while ((thead = buf->head) != NULL) {
+ buf->head = thead->next;
kfree(thead);
}
- while ((thead = tty->buf.free) != NULL) {
- tty->buf.free = thead->next;
+ while ((thead = buf->free) != NULL) {
+ buf->free = thead->next;
kfree(thead);
}
- tty->buf.tail = NULL;
- tty->buf.memory_used = 0;
+ buf->tail = NULL;
+ buf->memory_used = 0;
}
/**
* Locking: Caller must hold tty->buf.lock
*/
-static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
+static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
{
struct tty_buffer *p;
- if (tty->buf.memory_used + size > 65536)
+ if (port->buf.memory_used + size > 65536)
return NULL;
p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
if (p == NULL)
p->read = 0;
p->char_buf_ptr = (char *)(p->data);
p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
- tty->buf.memory_used += size;
+ port->buf.memory_used += size;
return p;
}
* Locking: Caller must hold tty->buf.lock
*/
-static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
+static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
{
+ struct tty_bufhead *buf = &port->buf;
+
/* Dumb strategy for now - should keep some stats */
- tty->buf.memory_used -= b->size;
- WARN_ON(tty->buf.memory_used < 0);
+ buf->memory_used -= b->size;
+ WARN_ON(buf->memory_used < 0);
if (b->size >= 512)
kfree(b);
else {
- b->next = tty->buf.free;
- tty->buf.free = b;
+ b->next = buf->free;
+ buf->free = b;
}
}
* Locking: Caller must hold tty->buf.lock
*/
-static void __tty_buffer_flush(struct tty_struct *tty)
+static void __tty_buffer_flush(struct tty_port *port)
{
+ struct tty_bufhead *buf = &port->buf;
struct tty_buffer *thead;
- while ((thead = tty->buf.head) != NULL) {
- tty->buf.head = thead->next;
- tty_buffer_free(tty, thead);
+ while ((thead = buf->head) != NULL) {
+ buf->head = thead->next;
+ tty_buffer_free(port, thead);
}
- tty->buf.tail = NULL;
+ buf->tail = NULL;
}
/**
void tty_buffer_flush(struct tty_struct *tty)
{
+ struct tty_port *port = tty->port;
+ struct tty_bufhead *buf = &port->buf;
unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
+
+ spin_lock_irqsave(&buf->lock, flags);
/* If the data is being pushed to the tty layer then we can't
process it here. Instead set a flag and the flush_to_ldisc
path will process the flush request before it exits */
- if (test_bit(TTY_FLUSHING, &tty->flags)) {
- set_bit(TTY_FLUSHPENDING, &tty->flags);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ if (test_bit(TTYP_FLUSHING, &port->iflags)) {
+ set_bit(TTYP_FLUSHPENDING, &port->iflags);
+ spin_unlock_irqrestore(&buf->lock, flags);
wait_event(tty->read_wait,
- test_bit(TTY_FLUSHPENDING, &tty->flags) == 0);
+ test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
return;
} else
- __tty_buffer_flush(tty);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ __tty_buffer_flush(port);
+ spin_unlock_irqrestore(&buf->lock, flags);
}
/**
* Locking: Caller must hold tty->buf.lock
*/
-static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
+static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
{
- struct tty_buffer **tbh = &tty->buf.free;
+ struct tty_buffer **tbh = &port->buf.free;
while ((*tbh) != NULL) {
struct tty_buffer *t = *tbh;
if (t->size >= size) {
t->used = 0;
t->commit = 0;
t->read = 0;
- tty->buf.memory_used += t->size;
+ port->buf.memory_used += t->size;
return t;
}
tbh = &((*tbh)->next);
}
/* Round the buffer size out */
size = (size + 0xFF) & ~0xFF;
- return tty_buffer_alloc(tty, size);
+ return tty_buffer_alloc(port, size);
/* Should possibly check if this fails for the largest buffer we
have queued and recycle that ? */
}
*
* Make at least size bytes of linear space available for the tty
* buffer. If we fail return the size we managed to find.
- * Locking: Caller must hold tty->buf.lock
+ * Locking: Caller must hold port->buf.lock
*/
-static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
+static int __tty_buffer_request_room(struct tty_port *port, size_t size)
{
+ struct tty_bufhead *buf = &port->buf;
struct tty_buffer *b, *n;
int left;
/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
remove this conditional if its worth it. This would be invisible
to the callers */
- if ((b = tty->buf.tail) != NULL)
+ b = buf->tail;
+ if (b != NULL)
left = b->size - b->used;
else
left = 0;
if (left < size) {
/* This is the slow path - looking for new buffers to use */
- if ((n = tty_buffer_find(tty, size)) != NULL) {
+ if ((n = tty_buffer_find(port, size)) != NULL) {
if (b != NULL) {
b->next = n;
b->commit = b->used;
} else
- tty->buf.head = n;
- tty->buf.tail = n;
+ buf->head = n;
+ buf->tail = n;
} else
size = left;
}
* Make at least size bytes of linear space available for the tty
* buffer. If we fail return the size we managed to find.
*
- * Locking: Takes tty->buf.lock
+ * Locking: Takes port->buf.lock
*/
int tty_buffer_request_room(struct tty_struct *tty, size_t size)
{
+ struct tty_port *port = tty->port;
unsigned long flags;
int length;
- spin_lock_irqsave(&tty->buf.lock, flags);
- length = __tty_buffer_request_room(tty, size);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_lock_irqsave(&port->buf.lock, flags);
+ length = __tty_buffer_request_room(port, size);
+ spin_unlock_irqrestore(&port->buf.lock, flags);
return length;
}
EXPORT_SYMBOL_GPL(tty_buffer_request_room);
* Queue a series of bytes to the tty buffering. All the characters
* passed are marked with the supplied flag. Returns the number added.
*
- * Locking: Called functions may take tty->buf.lock
+ * Locking: Called functions may take port->buf.lock
*/
int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
const unsigned char *chars, char flag, size_t size)
{
+ struct tty_bufhead *buf = &tty->port->buf;
int copied = 0;
do {
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
unsigned long flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, flags);
- space = __tty_buffer_request_room(tty, goal);
- tb = tty->buf.tail;
+ spin_lock_irqsave(&buf->lock, flags);
+ space = __tty_buffer_request_room(tty->port, goal);
+ tb = buf->tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0)) {
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
break;
}
memcpy(tb->char_buf_ptr + tb->used, chars, space);
memset(tb->flag_buf_ptr + tb->used, flag, space);
tb->used += space;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
copied += space;
chars += space;
/* There is a small chance that we need to split the data over
* the flags array indicates the status of the character. Returns the
* number added.
*
- * Locking: Called functions may take tty->buf.lock
+ * Locking: Called functions may take port->buf.lock
*/
int tty_insert_flip_string_flags(struct tty_struct *tty,
const unsigned char *chars, const char *flags, size_t size)
{
+ struct tty_bufhead *buf = &tty->port->buf;
int copied = 0;
do {
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
unsigned long __flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, __flags);
- space = __tty_buffer_request_room(tty, goal);
- tb = tty->buf.tail;
+ spin_lock_irqsave(&buf->lock, __flags);
+ space = __tty_buffer_request_room(tty->port, goal);
+ tb = buf->tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0)) {
- spin_unlock_irqrestore(&tty->buf.lock, __flags);
+ spin_unlock_irqrestore(&buf->lock, __flags);
break;
}
memcpy(tb->char_buf_ptr + tb->used, chars, space);
memcpy(tb->flag_buf_ptr + tb->used, flags, space);
tb->used += space;
- spin_unlock_irqrestore(&tty->buf.lock, __flags);
+ spin_unlock_irqrestore(&buf->lock, __flags);
copied += space;
chars += space;
flags += space;
* Takes any pending buffers and transfers their ownership to the
* ldisc side of the queue. It then schedules those characters for
* processing by the line discipline.
+ * Note that this function can only be used when the low_latency flag
+ * is unset. Otherwise the workqueue won't be flushed.
*
- * Locking: Takes tty->buf.lock
+ * Locking: Takes port->buf.lock
*/
void tty_schedule_flip(struct tty_struct *tty)
{
+ struct tty_bufhead *buf = &tty->port->buf;
unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
- tty->buf.tail->commit = tty->buf.tail->used;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
- schedule_work(&tty->buf.work);
+ WARN_ON(tty->low_latency);
+
+ spin_lock_irqsave(&buf->lock, flags);
+ if (buf->tail != NULL)
+ buf->tail->commit = buf->tail->used;
+ spin_unlock_irqrestore(&buf->lock, flags);
+ schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_schedule_flip);
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
*
- * Locking: May call functions taking tty->buf.lock
+ * Locking: May call functions taking port->buf.lock
*/
int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
- size_t size)
+ size_t size)
{
+ struct tty_bufhead *buf = &tty->port->buf;
int space;
unsigned long flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, flags);
- space = __tty_buffer_request_room(tty, size);
+ spin_lock_irqsave(&buf->lock, flags);
+ space = __tty_buffer_request_room(tty->port, size);
- tb = tty->buf.tail;
+ tb = buf->tail;
if (likely(space)) {
*chars = tb->char_buf_ptr + tb->used;
memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
tb->used += space;
}
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
return space;
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
*
- * Locking: May call functions taking tty->buf.lock
+ * Locking: May call functions taking port->buf.lock
*/
int tty_prepare_flip_string_flags(struct tty_struct *tty,
unsigned char **chars, char **flags, size_t size)
{
+ struct tty_bufhead *buf = &tty->port->buf;
int space;
unsigned long __flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, __flags);
- space = __tty_buffer_request_room(tty, size);
+ spin_lock_irqsave(&buf->lock, __flags);
+ space = __tty_buffer_request_room(tty->port, size);
- tb = tty->buf.tail;
+ tb = buf->tail;
if (likely(space)) {
*chars = tb->char_buf_ptr + tb->used;
*flags = tb->flag_buf_ptr + tb->used;
tb->used += space;
}
- spin_unlock_irqrestore(&tty->buf.lock, __flags);
+ spin_unlock_irqrestore(&buf->lock, __flags);
return space;
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
static void flush_to_ldisc(struct work_struct *work)
{
- struct tty_struct *tty =
- container_of(work, struct tty_struct, buf.work);
+ struct tty_port *port = container_of(work, struct tty_port, buf.work);
+ struct tty_bufhead *buf = &port->buf;
+ struct tty_struct *tty;
unsigned long flags;
struct tty_ldisc *disc;
+ tty = port->itty;
+ if (WARN_RATELIMIT(tty == NULL, "tty is NULL"))
+ return;
+
disc = tty_ldisc_ref(tty);
if (disc == NULL) /* !TTY_LDISC */
return;
- spin_lock_irqsave(&tty->buf.lock, flags);
+ spin_lock_irqsave(&buf->lock, flags);
- if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
+ if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
struct tty_buffer *head;
- while ((head = tty->buf.head) != NULL) {
+ while ((head = buf->head) != NULL) {
int count;
char *char_buf;
unsigned char *flag_buf;
if (!count) {
if (head->next == NULL)
break;
- tty->buf.head = head->next;
- tty_buffer_free(tty, head);
+ buf->head = head->next;
+ tty_buffer_free(port, head);
continue;
}
/* Ldisc or user is trying to flush the buffers
we are feeding to the ldisc, stop feeding the
line discipline as we want to empty the queue */
- if (test_bit(TTY_FLUSHPENDING, &tty->flags))
+ if (test_bit(TTYP_FLUSHPENDING, &port->iflags))
break;
if (!tty->receive_room)
break;
char_buf = head->char_buf_ptr + head->read;
flag_buf = head->flag_buf_ptr + head->read;
head->read += count;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
disc->ops->receive_buf(tty, char_buf,
flag_buf, count);
- spin_lock_irqsave(&tty->buf.lock, flags);
+ spin_lock_irqsave(&buf->lock, flags);
}
- clear_bit(TTY_FLUSHING, &tty->flags);
+ clear_bit(TTYP_FLUSHING, &port->iflags);
}
/* We may have a deferred request to flush the input buffer,
if so pull the chain under the lock and empty the queue */
- if (test_bit(TTY_FLUSHPENDING, &tty->flags)) {
- __tty_buffer_flush(tty);
- clear_bit(TTY_FLUSHPENDING, &tty->flags);
+ if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) {
+ __tty_buffer_flush(port);
+ clear_bit(TTYP_FLUSHPENDING, &port->iflags);
wake_up(&tty->read_wait);
}
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
tty_ldisc_deref(disc);
}
*/
void tty_flush_to_ldisc(struct tty_struct *tty)
{
- flush_work(&tty->buf.work);
+ if (!tty->low_latency)
+ flush_work(&tty->port->buf.work);
}
/**
void tty_flip_buffer_push(struct tty_struct *tty)
{
+ struct tty_bufhead *buf = &tty->port->buf;
unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
- tty->buf.tail->commit = tty->buf.tail->used;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+
+ spin_lock_irqsave(&buf->lock, flags);
+ if (buf->tail != NULL)
+ buf->tail->commit = buf->tail->used;
+ spin_unlock_irqrestore(&buf->lock, flags);
if (tty->low_latency)
- flush_to_ldisc(&tty->buf.work);
+ flush_to_ldisc(&buf->work);
else
- schedule_work(&tty->buf.work);
+ schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_flip_buffer_push);
* Locking: none
*/
-void tty_buffer_init(struct tty_struct *tty)
+void tty_buffer_init(struct tty_port *port)
{
- spin_lock_init(&tty->buf.lock);
- tty->buf.head = NULL;
- tty->buf.tail = NULL;
- tty->buf.free = NULL;
- tty->buf.memory_used = 0;
- INIT_WORK(&tty->buf.work, flush_to_ldisc);
+ struct tty_bufhead *buf = &port->buf;
+
+ spin_lock_init(&buf->lock);
+ buf->head = NULL;
+ buf->tail = NULL;
+ buf->free = NULL;
+ buf->memory_used = 0;
+ INIT_WORK(&buf->work, flush_to_ldisc);
}
if (tty->dev)
put_device(tty->dev);
kfree(tty->write_buf);
- tty_buffer_free_all(tty);
tty->magic = 0xDEADDEAD;
kfree(tty);
}
"%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
__func__, tty->driver->name);
+ tty->port->itty = tty;
+
/*
* Structures all installed ... call the ldisc open routines.
* If we fail here just call release_tty to clean up. No need
tty->ops->shutdown(tty);
tty_free_termios(tty);
tty_driver_remove_tty(tty->driver, tty);
+ tty->port->itty = NULL;
if (tty->link)
tty_kref_put(tty->link);
struct tty_struct *tty = file_tty(filp);
struct tty_struct *o_tty;
int pty_master, tty_closing, o_tty_closing, do_sleep;
- int devpts;
int idx;
char buf[64];
idx = tty->index;
pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER);
- devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
/* Review: parallel close */
o_tty = tty->link;
release_tty(tty, idx);
mutex_unlock(&tty_mutex);
- /* Make this pty number available for reallocation */
- if (devpts)
- devpts_kill_index(inode, idx);
return 0;
}
tty_ldisc_init(tty);
tty->session = NULL;
tty->pgrp = NULL;
- tty->overrun_time = jiffies;
- tty_buffer_init(tty);
mutex_init(&tty->legacy_mutex);
mutex_init(&tty->termios_mutex);
mutex_init(&tty->ldisc_mutex);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
INIT_WORK(&tty->hangup_work, do_tty_hangup);
- mutex_init(&tty->atomic_read_lock);
mutex_init(&tty->atomic_write_lock);
- mutex_init(&tty->output_lock);
- mutex_init(&tty->echo_lock);
- spin_lock_init(&tty->read_lock);
spin_lock_init(&tty->ctrl_lock);
INIT_LIST_HEAD(&tty->tty_files);
INIT_WORK(&tty->SAK_work, do_SAK_work);
static int tty_ldisc_halt(struct tty_struct *tty)
{
clear_bit(TTY_LDISC, &tty->flags);
- return cancel_work_sync(&tty->buf.work);
+ return cancel_work_sync(&tty->port->buf.work);
}
/**
{
flush_work(&tty->hangup_work);
flush_work(&tty->SAK_work);
- flush_work(&tty->buf.work);
+ flush_work(&tty->port->buf.work);
}
/**
/* Restart the work queue in case no characters kick it off. Safe if
already running */
if (work)
- schedule_work(&tty->buf.work);
+ schedule_work(&tty->port->buf.work);
if (o_work)
- schedule_work(&o_tty->buf.work);
+ schedule_work(&o_tty->port->buf.work);
mutex_unlock(&tty->ldisc_mutex);
tty_unlock(tty);
return retval;
*/
clear_bit(TTY_LDISC, &tty->flags);
tty_unlock(tty);
- cancel_work_sync(&tty->buf.work);
+ cancel_work_sync(&tty->port->buf.work);
mutex_unlock(&tty->ldisc_mutex);
retry:
tty_lock(tty);
static void tty_ldisc_kill(struct tty_struct *tty)
{
+ /* There cannot be users from userspace now. But there still might be
+ * drivers holding a reference via tty_ldisc_ref. Do not steal them the
+ * ldisc until they are done. */
+ tty_ldisc_wait_idle(tty, MAX_SCHEDULE_TIMEOUT);
+
mutex_lock(&tty->ldisc_mutex);
/*
* Now kill off the ldisc
void tty_port_init(struct tty_port *port)
{
memset(port, 0, sizeof(*port));
+ tty_buffer_init(port);
init_waitqueue_head(&port->open_wait);
init_waitqueue_head(&port->close_wait);
init_waitqueue_head(&port->delta_msr_wait);
struct tty_port *port = container_of(kref, struct tty_port, kref);
if (port->xmit_buf)
free_page((unsigned long)port->xmit_buf);
+ tty_buffer_free_all(port);
if (port->ops->destruct)
port->ops->destruct(port);
else
struct tty_ldisc *ld;
DECLARE_WAITQUEUE(wait, current);
-
console_lock();
poke_blanked_console();
console_unlock();
- /* FIXME: wtf is this supposed to achieve ? */
- ld = tty_ldisc_ref(tty);
- if (!ld)
- ld = tty_ldisc_ref_wait(tty);
+ ld = tty_ldisc_ref_wait(tty);
/* FIXME: this is completely unsafe */
add_wait_queue(&vc->paste_wait, &wait);
}
count = sel_buffer_lth - pasted;
count = min(count, tty->receive_room);
- tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted,
- NULL, count);
+ ld->ops->receive_buf(tty, sel_buffer + pasted, NULL, count);
pasted += count;
}
remove_wait_queue(&vc->paste_wait, &wait);
#include <asm/unaligned.h>
#include <asm/mach-types.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/usb.h>
#define DRIVER_DESC "OMAP UDC driver"
#define DRIVER_VERSION "4 October 2004"
+#define OMAP_DMA_USB_W2FC_TX0 29
+
/*
* The OMAP UDC needs _very_ early endpoint setup: before enabling the
* D+ pullup to allow enumeration. That's too early for the gadget
#include <linux/ctype.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
#include "u_ether.h"
while (skb2) {
if (status < 0
|| ETH_HLEN > skb2->len
- || skb2->len > ETH_FRAME_LEN) {
+ || skb2->len > VLAN_ETH_FRAME_LEN) {
dev->net->stats.rx_errors++;
dev->net->stats.rx_length_errors++;
DBG(dev, "rx length %d\n", skb2->len);
#include <linux/usb/ulpi.h>
#include <linux/slab.h>
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include <asm/mach-types.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/usb/ulpi.h>
-#include <plat/usb.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/gpio.h>
#include <linux/clk.h>
+#include <linux/platform_data/usb-omap.h>
+
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
#define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5)
#include <asm/mach-types.h>
#include <mach/mux.h>
-#include <plat/fpga.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
{
if (on) {
if (machine_is_omap_innovator() && cpu_is_omap1510())
- fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+ __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
INNOVATOR_FPGA_CAM_USB_CONTROL);
else if (machine_is_omap_osk())
tps65010_set_gpio_out_value(GPIO1, LOW);
} else {
if (machine_is_omap_innovator() && cpu_is_omap1510())
- fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+ __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
INNOVATOR_FPGA_CAM_USB_CONTROL);
else if (machine_is_omap_osk())
*/
#include <linux/platform_device.h>
-#include <plat/usb.h>
#include <linux/pm_runtime.h>
/*-------------------------------------------------------------------------*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/nop-usb-xceiv.h>
-
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
#include "musb_core.h"
#include <linux/pm_runtime.h>
#include <linux/module.h>
#include <linux/usb/nop-usb-xceiv.h>
+#include <linux/platform_data/usb-omap.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
-#include <plat/usb.h>
-
#include "musb_core.h"
#ifdef CONFIG_OF
#ifndef __MUSB_OMAP243X_H__
#define __MUSB_OMAP243X_H__
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
/*
* OMAP2430-specific definitions
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include "musb_core.h"
#include "tusb6010.h"
#define MAX_DMAREQ 5 /* REVISIT: Really 6, but req5 not OK */
+#define OMAP24XX_DMA_EXT_DMAREQ0 2
+#define OMAP24XX_DMA_EXT_DMAREQ1 3
+#define OMAP242X_DMA_EXT_DMAREQ2 14
+#define OMAP242X_DMA_EXT_DMAREQ3 15
+#define OMAP242X_DMA_EXT_DMAREQ4 16
+#define OMAP242X_DMA_EXT_DMAREQ5 64
+
struct tusb_omap_dma_ch {
struct musb *musb;
void __iomem *tbase;
#include <linux/math64.h>
#include <linux/platform_data/video-imxfb.h>
-#include <mach/hardware.h>
/*
* Complain if VAR is out of range.
#define LCDC_SIZE 0x04
#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
-#define YMAX_MASK (cpu_is_mx1() ? 0x1ff : 0x3ff)
-#define SIZE_YMAX(y) ((y) & YMAX_MASK)
+#define YMAX_MASK_IMX1 0x1ff
+#define YMAX_MASK_IMX21 0x3ff
#define LCDC_VPW 0x08
#define VPW_VPW(x) ((x) & 0x3ff)
struct fb_bitfield transp;
};
+enum imxfb_type {
+ IMX1_FB,
+ IMX21_FB,
+};
+
struct imxfb_info {
struct platform_device *pdev;
void __iomem *regs;
struct clk *clk_ipg;
struct clk *clk_ahb;
struct clk *clk_per;
+ enum imxfb_type devtype;
/*
* These are the addresses we mapped
void (*backlight_power)(int);
};
+static struct platform_device_id imxfb_devtype[] = {
+ {
+ .name = "imx1-fb",
+ .driver_data = IMX1_FB,
+ }, {
+ .name = "imx21-fb",
+ .driver_data = IMX21_FB,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, imxfb_devtype);
+
+static inline int is_imx1_fb(struct imxfb_info *fbi)
+{
+ return fbi->devtype == IMX1_FB;
+}
+
#define IMX_NAME "IMX"
/*
break;
case 16:
default:
- if (cpu_is_mx1())
+ if (is_imx1_fb(fbi))
pcr |= PCR_BPIX_12;
else
pcr |= PCR_BPIX_16;
static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct imxfb_info *fbi = info->par;
+ u32 ymax_mask = is_imx1_fb(fbi) ? YMAX_MASK_IMX1 : YMAX_MASK_IMX21;
pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n",
var->xres, var->hsync_len,
if (var->right_margin > 255)
printk(KERN_ERR "%s: invalid right_margin %d\n",
info->fix.id, var->right_margin);
- if (var->yres < 1 || var->yres > YMAX_MASK)
+ if (var->yres < 1 || var->yres > ymax_mask)
printk(KERN_ERR "%s: invalid yres %d\n",
info->fix.id, var->yres);
if (var->vsync_len > 100)
VCR_V_WAIT_2(var->upper_margin),
fbi->regs + LCDC_VCR);
- writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres),
+ writel(SIZE_XMAX(var->xres) | (var->yres & ymax_mask),
fbi->regs + LCDC_SIZE);
writel(fbi->pcr, fbi->regs + LCDC_PCR);
return -ENOMEM;
fbi = info->par;
+ fbi->devtype = pdev->id_entry->driver_data;
if (!fb_mode)
fb_mode = pdata->mode[0].mode.name;
.driver = {
.name = DRIVER_NAME,
},
+ .id_table = imxfb_devtype,
};
static int imxfb_setup(void)
#include <linux/console.h>
#include <linux/clk.h>
#include <linux/mutex.h>
+#include <linux/dma/ipu-dma.h>
#include <linux/platform_data/dma-imx.h>
-#include <mach/hardware.h>
-#include <mach/ipu.h>
#include <linux/platform_data/video-mx3fb.h>
#include <asm/io.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <plat/fpga.h>
+#include <mach/hardware.h>
+
#include "omapfb.h"
static int innovator1510_panel_init(struct lcd_panel *panel,
static int innovator1510_panel_enable(struct lcd_panel *panel)
{
- fpga_write(0x7, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+ __raw_writeb(0x7, OMAP1510_FPGA_LCD_PANEL_CONTROL);
return 0;
}
static void innovator1510_panel_disable(struct lcd_panel *panel)
{
- fpga_write(0x0, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+ __raw_writeb(0x0, OMAP1510_FPGA_LCD_PANEL_CONTROL);
}
static unsigned long innovator1510_panel_get_caps(struct lcd_panel *panel)
#include <linux/gfp.h>
#include <mach/lcdc.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <asm/mach-types.h>
#include <linux/uaccess.h>
#include <linux/module.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include "omapfb.h"
#include "lcdc.h"
#include <linux/io.h>
#include <linux/interrupt.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include "omapfb.h"
#include "lcdc.h"
core.pdev = pdev;
- dss_features_init();
+ dss_features_init(pdata->version);
dss_apply_init();
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <plat/cpu.h>
-
#include <video/omapdss.h>
#include "dss.h"
.gfx_fifo_workaround = true,
};
-static int __init dispc_init_features(struct device *dev)
+static int __init dispc_init_features(struct platform_device *pdev)
{
+ struct omap_dss_board_info *pdata = pdev->dev.platform_data;
const struct dispc_features *src;
struct dispc_features *dst;
- dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL);
+ dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
if (!dst) {
- dev_err(dev, "Failed to allocate DISPC Features\n");
+ dev_err(&pdev->dev, "Failed to allocate DISPC Features\n");
return -ENOMEM;
}
- if (cpu_is_omap24xx()) {
+ switch (pdata->version) {
+ case OMAPDSS_VER_OMAP24xx:
src = &omap24xx_dispc_feats;
- } else if (cpu_is_omap34xx()) {
- if (omap_rev() < OMAP3430_REV_ES3_0)
- src = &omap34xx_rev1_0_dispc_feats;
- else
- src = &omap34xx_rev3_0_dispc_feats;
- } else if (cpu_is_omap44xx()) {
+ break;
+
+ case OMAPDSS_VER_OMAP34xx_ES1:
+ src = &omap34xx_rev1_0_dispc_feats;
+ break;
+
+ case OMAPDSS_VER_OMAP34xx_ES3:
+ case OMAPDSS_VER_OMAP3630:
+ case OMAPDSS_VER_AM35xx:
+ src = &omap34xx_rev3_0_dispc_feats;
+ break;
+
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
src = &omap44xx_dispc_feats;
- } else if (soc_is_omap54xx()) {
+ break;
+
+ case OMAPDSS_VER_OMAP5:
src = &omap44xx_dispc_feats;
- } else {
+ break;
+
+ default:
return -ENODEV;
}
dispc.pdev = pdev;
- r = dispc_init_features(&dispc.pdev->dev);
+ r = dispc_init_features(dispc.pdev);
if (r)
return r;
#include <video/omapdss.h>
-#include <plat/cpu.h>
-
#include "dss.h"
#include "dss_features.h"
.dpi_select_source = &dss_dpi_select_source_omap5,
};
-static int __init dss_init_features(struct device *dev)
+static int __init dss_init_features(struct platform_device *pdev)
{
+ struct omap_dss_board_info *pdata = pdev->dev.platform_data;
const struct dss_features *src;
struct dss_features *dst;
- dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL);
+ dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
if (!dst) {
- dev_err(dev, "Failed to allocate local DSS Features\n");
+ dev_err(&pdev->dev, "Failed to allocate local DSS Features\n");
return -ENOMEM;
}
- if (cpu_is_omap24xx())
+ switch (pdata->version) {
+ case OMAPDSS_VER_OMAP24xx:
src = &omap24xx_dss_feats;
- else if (cpu_is_omap34xx())
+ break;
+
+ case OMAPDSS_VER_OMAP34xx_ES1:
+ case OMAPDSS_VER_OMAP34xx_ES3:
+ case OMAPDSS_VER_AM35xx:
src = &omap34xx_dss_feats;
- else if (cpu_is_omap3630())
+ break;
+
+ case OMAPDSS_VER_OMAP3630:
src = &omap3630_dss_feats;
- else if (cpu_is_omap44xx())
+ break;
+
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
src = &omap44xx_dss_feats;
- else if (soc_is_omap54xx())
+ break;
+
+ case OMAPDSS_VER_OMAP5:
src = &omap54xx_dss_feats;
- else
+ break;
+
+ default:
return -ENODEV;
+ }
memcpy(dst, src, sizeof(*dst));
dss.feat = dst;
dss.pdev = pdev;
- r = dss_init_features(&dss.pdev->dev);
+ r = dss_init_features(dss.pdev);
if (r)
return r;
#include <linux/slab.h>
#include <video/omapdss.h>
-#include <plat/cpu.h>
#include "dss.h"
#include "dss_features.h"
};
-void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data)
+void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data,
+ enum omapdss_version version)
{
- if (cpu_is_omap44xx())
+ switch (version) {
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
ip_data->ops = &omap4_hdmi_functions;
+ break;
+ default:
+ ip_data->ops = NULL;
+ }
+
+ WARN_ON(ip_data->ops == NULL);
}
#endif
return omap_current_dss_features->supported_rotation_types & rot_type;
}
-void dss_features_init(void)
+void dss_features_init(enum omapdss_version version)
{
- if (cpu_is_omap24xx())
+ switch (version) {
+ case OMAPDSS_VER_OMAP24xx:
omap_current_dss_features = &omap2_dss_features;
- else if (cpu_is_omap3630())
+ break;
+
+ case OMAPDSS_VER_OMAP34xx_ES1:
+ case OMAPDSS_VER_OMAP34xx_ES3:
+ omap_current_dss_features = &omap3430_dss_features;
+ break;
+
+ case OMAPDSS_VER_OMAP3630:
omap_current_dss_features = &omap3630_dss_features;
- else if (cpu_is_omap34xx()) {
- if (soc_is_am35xx()) {
- omap_current_dss_features = &am35xx_dss_features;
- } else {
- omap_current_dss_features = &omap3430_dss_features;
- }
- }
- else if (omap_rev() == OMAP4430_REV_ES1_0)
+ break;
+
+ case OMAPDSS_VER_OMAP4430_ES1:
omap_current_dss_features = &omap4430_es1_0_dss_features;
- else if (omap_rev() == OMAP4430_REV_ES2_0 ||
- omap_rev() == OMAP4430_REV_ES2_1 ||
- omap_rev() == OMAP4430_REV_ES2_2)
+ break;
+
+ case OMAPDSS_VER_OMAP4430_ES2:
omap_current_dss_features = &omap4430_es2_0_1_2_dss_features;
- else if (cpu_is_omap44xx())
+ break;
+
+ case OMAPDSS_VER_OMAP4:
omap_current_dss_features = &omap4_dss_features;
- else if (soc_is_omap54xx())
+ break;
+
+ case OMAPDSS_VER_OMAP5:
omap_current_dss_features = &omap5_dss_features;
- else
+ break;
+
+ case OMAPDSS_VER_AM35xx:
+ omap_current_dss_features = &am35xx_dss_features;
+ break;
+
+ default:
DSSWARN("Unsupported OMAP version");
+ break;
+ }
}
bool dss_has_feature(enum dss_feat_id id);
void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end);
-void dss_features_init(void);
+void dss_features_init(enum omapdss_version version);
#if defined(CONFIG_OMAP4_DSS_HDMI)
-void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data);
+void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data,
+ enum omapdss_version version);
#endif
#endif
static int __init hdmi_init_display(struct omap_dss_device *dssdev)
{
+ struct omap_dss_board_info *pdata = hdmi.pdev->dev.platform_data;
int r;
struct gpio gpios[] = {
DSSDBG("init_display\n");
- dss_init_hdmi_ip_ops(&hdmi.ip_data);
+ dss_init_hdmi_ip_ops(&hdmi.ip_data, pdata->version);
if (hdmi.vdda_hdmi_dac_reg == NULL) {
struct regulator *reg;
#include <linux/export.h>
#include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
#include <plat/vram.h>
#include "omapfb.h"
#include <linux/omapfb.h>
#include <video/omapdss.h>
-#include <plat/cpu.h>
#include <plat/vram.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
#include "omapfb.h"
goto err0;
}
- /* TODO : Replace cpu check with omap_has_vrfb once HAS_FEATURE
- * available for OMAP2 and OMAP3
- */
- if (def_vrfb && !cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+ if (def_vrfb && !omap_vrfb_supported()) {
def_vrfb = 0;
dev_warn(&pdev->dev, "VRFB is not supported on this hardware, "
"ignoring the module parameter vrfb=y\n");
#include <linux/omapfb.h>
#include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
#include "omapfb.h"
#include <linux/io.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
+#include <linux/platform_device.h>
-#include <plat/vrfb.h>
-#include <plat/sdrc.h>
+#include <video/omapvrfb.h>
#ifdef DEBUG
#define DBG(format, ...) pr_debug("VRFB: " format, ## __VA_ARGS__)
#define DBG(format, ...)
#endif
-#define SMS_ROT_VIRT_BASE(context, rot) \
- (((context >= 4) ? 0xD0000000 : 0x70000000) \
- + (0x4000000 * (context)) \
- + (0x1000000 * (rot)))
+#define SMS_ROT_CONTROL(context) (0x0 + 0x10 * context)
+#define SMS_ROT_SIZE(context) (0x4 + 0x10 * context)
+#define SMS_ROT_PHYSICAL_BA(context) (0x8 + 0x10 * context)
+#define SMS_ROT_VIRT_BASE(rot) (0x1000000 * (rot))
#define OMAP_VRFB_SIZE (2048 * 2048 * 4)
#define SMS_PW_OFFSET 4
#define SMS_PS_OFFSET 0
-#define VRFB_NUM_CTXS 12
/* bitmap of reserved contexts */
static unsigned long ctx_map;
+struct vrfb_ctx {
+ u32 base;
+ u32 physical_ba;
+ u32 control;
+ u32 size;
+};
+
static DEFINE_MUTEX(ctx_lock);
/*
* we don't need locking, since no drivers will run until after the wake-up
* has finished.
*/
-static struct {
- u32 physical_ba;
- u32 control;
- u32 size;
-} vrfb_hw_context[VRFB_NUM_CTXS];
+
+static void __iomem *vrfb_base;
+
+static int num_ctxs;
+static struct vrfb_ctx *ctxs;
+
+static bool vrfb_loaded;
+
+static void omap2_sms_write_rot_control(u32 val, unsigned ctx)
+{
+ __raw_writel(val, vrfb_base + SMS_ROT_CONTROL(ctx));
+}
+
+static void omap2_sms_write_rot_size(u32 val, unsigned ctx)
+{
+ __raw_writel(val, vrfb_base + SMS_ROT_SIZE(ctx));
+}
+
+static void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
+{
+ __raw_writel(val, vrfb_base + SMS_ROT_PHYSICAL_BA(ctx));
+}
static inline void restore_hw_context(int ctx)
{
- omap2_sms_write_rot_control(vrfb_hw_context[ctx].control, ctx);
- omap2_sms_write_rot_size(vrfb_hw_context[ctx].size, ctx);
- omap2_sms_write_rot_physical_ba(vrfb_hw_context[ctx].physical_ba, ctx);
+ omap2_sms_write_rot_control(ctxs[ctx].control, ctx);
+ omap2_sms_write_rot_size(ctxs[ctx].size, ctx);
+ omap2_sms_write_rot_physical_ba(ctxs[ctx].physical_ba, ctx);
}
static u32 get_image_width_roundup(u16 width, u8 bytespp)
control |= VRFB_PAGE_WIDTH_EXP << SMS_PW_OFFSET;
control |= VRFB_PAGE_HEIGHT_EXP << SMS_PH_OFFSET;
- vrfb_hw_context[ctx].physical_ba = paddr;
- vrfb_hw_context[ctx].size = size;
- vrfb_hw_context[ctx].control = control;
+ ctxs[ctx].physical_ba = paddr;
+ ctxs[ctx].size = size;
+ ctxs[ctx].control = control;
omap2_sms_write_rot_physical_ba(paddr, ctx);
omap2_sms_write_rot_size(size, ctx);
mutex_lock(&ctx_lock);
- for (ctx = 0; ctx < VRFB_NUM_CTXS; ++ctx)
+ for (ctx = 0; ctx < num_ctxs; ++ctx)
if ((ctx_map & (1 << ctx)) == 0)
break;
- if (ctx == VRFB_NUM_CTXS) {
+ if (ctx == num_ctxs) {
pr_err("vrfb: no free contexts\n");
r = -EBUSY;
goto out;
vrfb->context = ctx;
for (rot = 0; rot < 4; ++rot) {
- paddr = SMS_ROT_VIRT_BASE(ctx, rot);
+ paddr = ctxs[ctx].base + SMS_ROT_VIRT_BASE(rot);
if (!request_mem_region(paddr, OMAP_VRFB_SIZE, "vrfb")) {
pr_err("vrfb: failed to reserve VRFB "
"area for ctx %d, rotation %d\n",
return r;
}
EXPORT_SYMBOL(omap_vrfb_request_ctx);
+
+bool omap_vrfb_supported(void)
+{
+ return vrfb_loaded;
+}
+EXPORT_SYMBOL(omap_vrfb_supported);
+
+static int __init vrfb_probe(struct platform_device *pdev)
+{
+ struct resource *mem;
+ int i;
+
+ /* first resource is the register res, the rest are vrfb contexts */
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "can't get vrfb base address\n");
+ return -EINVAL;
+ }
+
+ vrfb_base = devm_request_and_ioremap(&pdev->dev, mem);
+ if (!vrfb_base) {
+ dev_err(&pdev->dev, "can't ioremap vrfb memory\n");
+ return -ENOMEM;
+ }
+
+ num_ctxs = pdev->num_resources - 1;
+
+ ctxs = devm_kzalloc(&pdev->dev,
+ sizeof(struct vrfb_ctx) * num_ctxs,
+ GFP_KERNEL);
+
+ if (!ctxs)
+ return -ENOMEM;
+
+ for (i = 0; i < num_ctxs; ++i) {
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 1 + i);
+ if (!mem) {
+ dev_err(&pdev->dev, "can't get vrfb ctx %d address\n",
+ i);
+ return -EINVAL;
+ }
+
+ ctxs[i].base = mem->start;
+ }
+
+ vrfb_loaded = true;
+
+ return 0;
+}
+
+static void __exit vrfb_remove(struct platform_device *pdev)
+{
+ vrfb_loaded = false;
+}
+
+static struct platform_driver vrfb_driver = {
+ .driver.name = "omapvrfb",
+ .remove = __exit_p(vrfb_remove),
+};
+
+static int __init vrfb_init(void)
+{
+ return platform_driver_probe(&vrfb_driver, &vrfb_probe);
+}
+
+static void __exit vrfb_exit(void)
+{
+ platform_driver_unregister(&vrfb_driver);
+}
+
+module_init(vrfb_init);
+module_exit(vrfb_exit);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("OMAP VRFB");
+MODULE_LICENSE("GPL v2");
case XenbusStateReconfiguring:
case XenbusStateReconfigured:
case XenbusStateUnknown:
- case XenbusStateClosed:
break;
case XenbusStateInitWait:
info->feature_resize = val;
break;
+ case XenbusStateClosed:
+ if (dev->state == XenbusStateClosed)
+ break;
+ /* Missed the backend's CLOSING state -- fallthrough */
case XenbusStateClosing:
xenbus_frontend_closed(dev);
break;
void unregister_virtio_device(struct virtio_device *dev)
{
+ int index = dev->index; /* save for after device release */
+
device_unregister(&dev->dev);
- ida_simple_remove(&virtio_index_ida, dev->index);
+ ida_simple_remove(&virtio_index_ida, index);
}
EXPORT_SYMBOL_GPL(unregister_virtio_device);
#include <linux/uaccess.h>
#include <linux/timer.h>
#include <linux/jiffies.h>
-#include <mach/hardware.h>
#define DRIVER_NAME "imx2-wdt"
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <mach/hardware.h>
-#include <plat/cpu.h>
-#include <plat/prcm.h>
+
+#include <linux/platform_data/omap-wd-timer.h>
#include "omap_wdt.h"
static long omap_wdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
+ struct omap_wd_timer_platform_data *pdata;
struct omap_wdt_dev *wdev;
- int new_margin;
+ u32 rs;
+ int new_margin, bs;
static const struct watchdog_info ident = {
.identity = "OMAP Watchdog",
.options = WDIOF_SETTIMEOUT,
};
wdev = file->private_data;
+ pdata = wdev->dev->platform_data;
switch (cmd) {
case WDIOC_GETSUPPORT:
case WDIOC_GETSTATUS:
return put_user(0, (int __user *)arg);
case WDIOC_GETBOOTSTATUS:
-#ifdef CONFIG_ARCH_OMAP1
- if (cpu_is_omap16xx())
- return put_user(__raw_readw(ARM_SYSST),
- (int __user *)arg);
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_is_omap24xx())
- return put_user(omap_prcm_get_reset_sources(),
- (int __user *)arg);
-#endif
- return put_user(0, (int __user *)arg);
+ if (!pdata || !pdata->read_reset_sources)
+ return put_user(0, (int __user *)arg);
+ rs = pdata->read_reset_sources();
+ bs = (rs & (1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT)) ?
+ WDIOF_CARDRESET : 0;
+ return put_user(bs, (int __user *)arg);
case WDIOC_KEEPALIVE:
spin_lock(&wdt_lock);
omap_wdt_ping(wdev);
obj-y += manage.o balloon.o
obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o
endif
+obj-$(CONFIG_X86) += fallback.o
obj-y += grant-table.o features.o events.o
obj-y += xenbus/
{
struct pt_regs *old_regs = set_irq_regs(regs);
+ irq_enter();
#ifdef CONFIG_X86
exit_idle();
#endif
- irq_enter();
__xen_evtchn_do_upcall();
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/bug.h>
+#include <linux/export.h>
+#include <asm/hypervisor.h>
+#include <asm/xen/hypercall.h>
+
+int xen_event_channel_op_compat(int cmd, void *arg)
+{
+ struct evtchn_op op;
+ int rc;
+
+ op.cmd = cmd;
+ memcpy(&op.u, arg, sizeof(op.u));
+ rc = _hypercall1(int, event_channel_op_compat, &op);
+
+ switch (cmd) {
+ case EVTCHNOP_close:
+ case EVTCHNOP_send:
+ case EVTCHNOP_bind_vcpu:
+ case EVTCHNOP_unmask:
+ /* no output */
+ break;
+
+#define COPY_BACK(eop) \
+ case EVTCHNOP_##eop: \
+ memcpy(arg, &op.u.eop, sizeof(op.u.eop)); \
+ break
+
+ COPY_BACK(bind_interdomain);
+ COPY_BACK(bind_virq);
+ COPY_BACK(bind_pirq);
+ COPY_BACK(status);
+ COPY_BACK(alloc_unbound);
+ COPY_BACK(bind_ipi);
+#undef COPY_BACK
+
+ default:
+ WARN_ON(rc != -ENOSYS);
+ break;
+ }
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(xen_event_channel_op_compat);
+
+int HYPERVISOR_physdev_op_compat(int cmd, void *arg)
+{
+ struct physdev_op op;
+ int rc;
+
+ op.cmd = cmd;
+ memcpy(&op.u, arg, sizeof(op.u));
+ rc = _hypercall1(int, physdev_op_compat, &op);
+
+ switch (cmd) {
+ case PHYSDEVOP_IRQ_UNMASK_NOTIFY:
+ case PHYSDEVOP_set_iopl:
+ case PHYSDEVOP_set_iobitmap:
+ case PHYSDEVOP_apic_write:
+ /* no output */
+ break;
+
+#define COPY_BACK(pop, fld) \
+ case PHYSDEVOP_##pop: \
+ memcpy(arg, &op.u.fld, sizeof(op.u.fld)); \
+ break
+
+ COPY_BACK(irq_status_query, irq_status_query);
+ COPY_BACK(apic_read, apic_op);
+ COPY_BACK(ASSIGN_VECTOR, irq_op);
+#undef COPY_BACK
+
+ default:
+ WARN_ON(rc != -ENOSYS);
+ break;
+ }
+
+ return rc;
+}
#endif
}
+static void gntdev_free_map(struct grant_map *map)
+{
+ if (map == NULL)
+ return;
+
+ if (map->pages)
+ free_xenballooned_pages(map->count, map->pages);
+ kfree(map->pages);
+ kfree(map->grants);
+ kfree(map->map_ops);
+ kfree(map->unmap_ops);
+ kfree(map->kmap_ops);
+ kfree(map);
+}
+
static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count)
{
struct grant_map *add;
return add;
err:
- kfree(add->pages);
- kfree(add->grants);
- kfree(add->map_ops);
- kfree(add->unmap_ops);
- kfree(add->kmap_ops);
- kfree(add);
+ gntdev_free_map(add);
return NULL;
}
evtchn_put(map->notify.event);
}
- if (map->pages) {
- if (!use_ptemod)
- unmap_grant_pages(map, 0, map->count);
-
- free_xenballooned_pages(map->count, map->pages);
- }
- kfree(map->pages);
- kfree(map->grants);
- kfree(map->map_ops);
- kfree(map->unmap_ops);
- kfree(map);
+ if (map->pages && !use_ptemod)
+ unmap_grant_pages(map, 0, map->count);
+ gntdev_free_map(map);
}
/* ------------------------------------------------------------------ */
goto out;
/* Can't write a xenbus message larger we can buffer */
- if ((len + u->len) > sizeof(u->u.buffer)) {
+ if (len > sizeof(u->u.buffer) - u->len) {
/* On error, dump existing buffer */
u->len = 0;
rc = -EINVAL;
unsigned int sz = sizeof(struct bio) + extra_size;
struct kmem_cache *slab = NULL;
struct bio_slab *bslab, *new_bio_slabs;
+ unsigned int new_bio_slab_max;
unsigned int i, entry = -1;
mutex_lock(&bio_slab_lock);
goto out_unlock;
if (bio_slab_nr == bio_slab_max && entry == -1) {
- bio_slab_max <<= 1;
+ new_bio_slab_max = bio_slab_max << 1;
new_bio_slabs = krealloc(bio_slabs,
- bio_slab_max * sizeof(struct bio_slab),
+ new_bio_slab_max * sizeof(struct bio_slab),
GFP_KERNEL);
if (!new_bio_slabs)
goto out_unlock;
+ bio_slab_max = new_bio_slab_max;
bio_slabs = new_bio_slabs;
}
if (entry == -1)
*max_len = handle_length;
type = 255;
}
+ if (dentry)
+ dput(dentry);
return type;
}
}
}
+static void
+cifs_copy_sid(struct cifs_sid *dst, const struct cifs_sid *src)
+{
+ memcpy(dst, src, sizeof(*dst));
+ dst->num_subauth = min_t(u8, src->num_subauth, NUM_SUBAUTHS);
+}
+
static void
id_rb_insert(struct rb_root *root, struct cifs_sid *sidptr,
struct cifs_sid_id **psidid, char *typestr)
}
}
- memcpy(&(*psidid)->sid, sidptr, sizeof(struct cifs_sid));
+ cifs_copy_sid(&(*psidid)->sid, sidptr);
(*psidid)->time = jiffies - (SID_MAP_RETRY + 1);
(*psidid)->refcount = 0;
* any fields of the node after a reference is put .
*/
if (test_bit(SID_ID_MAPPED, &psidid->state)) {
- memcpy(ssid, &psidid->sid, sizeof(struct cifs_sid));
+ cifs_copy_sid(ssid, &psidid->sid);
psidid->time = jiffies; /* update ts for accessing */
goto id_sid_out;
}
if (IS_ERR(sidkey)) {
rc = -EINVAL;
cFYI(1, "%s: Can't map and id to a SID", __func__);
+ } else if (sidkey->datalen < sizeof(struct cifs_sid)) {
+ rc = -EIO;
+ cFYI(1, "%s: Downcall contained malformed key "
+ "(datalen=%hu)", __func__, sidkey->datalen);
} else {
lsid = (struct cifs_sid *)sidkey->payload.data;
- memcpy(&psidid->sid, lsid,
- sidkey->datalen < sizeof(struct cifs_sid) ?
- sidkey->datalen : sizeof(struct cifs_sid));
- memcpy(ssid, &psidid->sid,
- sidkey->datalen < sizeof(struct cifs_sid) ?
- sidkey->datalen : sizeof(struct cifs_sid));
+ cifs_copy_sid(&psidid->sid, lsid);
+ cifs_copy_sid(ssid, &psidid->sid);
set_bit(SID_ID_MAPPED, &psidid->state);
key_put(sidkey);
kfree(psidid->sidstr);
return rc;
}
if (test_bit(SID_ID_MAPPED, &psidid->state))
- memcpy(ssid, &psidid->sid, sizeof(struct cifs_sid));
+ cifs_copy_sid(ssid, &psidid->sid);
else
rc = -EINVAL;
}
static void copy_sec_desc(const struct cifs_ntsd *pntsd,
struct cifs_ntsd *pnntsd, __u32 sidsoffset)
{
- int i;
-
struct cifs_sid *owner_sid_ptr, *group_sid_ptr;
struct cifs_sid *nowner_sid_ptr, *ngroup_sid_ptr;
owner_sid_ptr = (struct cifs_sid *)((char *)pntsd +
le32_to_cpu(pntsd->osidoffset));
nowner_sid_ptr = (struct cifs_sid *)((char *)pnntsd + sidsoffset);
-
- nowner_sid_ptr->revision = owner_sid_ptr->revision;
- nowner_sid_ptr->num_subauth = owner_sid_ptr->num_subauth;
- for (i = 0; i < 6; i++)
- nowner_sid_ptr->authority[i] = owner_sid_ptr->authority[i];
- for (i = 0; i < 5; i++)
- nowner_sid_ptr->sub_auth[i] = owner_sid_ptr->sub_auth[i];
+ cifs_copy_sid(nowner_sid_ptr, owner_sid_ptr);
/* copy group sid */
group_sid_ptr = (struct cifs_sid *)((char *)pntsd +
le32_to_cpu(pntsd->gsidoffset));
ngroup_sid_ptr = (struct cifs_sid *)((char *)pnntsd + sidsoffset +
sizeof(struct cifs_sid));
-
- ngroup_sid_ptr->revision = group_sid_ptr->revision;
- ngroup_sid_ptr->num_subauth = group_sid_ptr->num_subauth;
- for (i = 0; i < 6; i++)
- ngroup_sid_ptr->authority[i] = group_sid_ptr->authority[i];
- for (i = 0; i < 5; i++)
- ngroup_sid_ptr->sub_auth[i] = group_sid_ptr->sub_auth[i];
+ cifs_copy_sid(ngroup_sid_ptr, group_sid_ptr);
return;
}
kfree(nowner_sid_ptr);
return rc;
}
- memcpy(owner_sid_ptr, nowner_sid_ptr,
- sizeof(struct cifs_sid));
+ cifs_copy_sid(owner_sid_ptr, nowner_sid_ptr);
kfree(nowner_sid_ptr);
*aclflag = CIFS_ACL_OWNER;
}
kfree(ngroup_sid_ptr);
return rc;
}
- memcpy(group_sid_ptr, ngroup_sid_ptr,
- sizeof(struct cifs_sid));
+ cifs_copy_sid(group_sid_ptr, ngroup_sid_ptr);
kfree(ngroup_sid_ptr);
*aclflag = CIFS_ACL_GROUP;
}
* in network traffic in the other paths.
*/
if (!(oflags & O_CREAT)) {
- struct dentry *res = cifs_lookup(inode, direntry, 0);
+ struct dentry *res;
+
+ /*
+ * Check for hashed negative dentry. We have already revalidated
+ * the dentry and it is fine. No need to perform another lookup.
+ */
+ if (!d_unhashed(direntry))
+ return -ENOENT;
+
+ res = cifs_lookup(inode, direntry, 0);
if (IS_ERR(res))
return PTR_ERR(res);
mutex_unlock(&allocated_ptys_lock);
}
-int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
+/**
+ * devpts_pty_new -- create a new inode in /dev/pts/
+ * @ptmx_inode: inode of the master
+ * @device: major+minor of the node to be created
+ * @index: used as a name of the node
+ * @priv: what's given back by devpts_get_priv
+ *
+ * The created inode is returned. Remove it from /dev/pts/ by devpts_pty_kill.
+ */
+struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index,
+ void *priv)
{
- /* tty layer puts index from devpts_new_index() in here */
- int number = tty->index;
- struct tty_driver *driver = tty->driver;
- dev_t device = MKDEV(driver->major, driver->minor_start+number);
struct dentry *dentry;
struct super_block *sb = pts_sb_from_inode(ptmx_inode);
- struct inode *inode = new_inode(sb);
+ struct inode *inode;
struct dentry *root = sb->s_root;
struct pts_fs_info *fsi = DEVPTS_SB(sb);
struct pts_mount_opts *opts = &fsi->mount_opts;
- int ret = 0;
char s[12];
- /* We're supposed to be given the slave end of a pty */
- BUG_ON(driver->type != TTY_DRIVER_TYPE_PTY);
- BUG_ON(driver->subtype != PTY_TYPE_SLAVE);
-
+ inode = new_inode(sb);
if (!inode)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
- inode->i_ino = number + 3;
+ inode->i_ino = index + 3;
inode->i_uid = opts->setuid ? opts->uid : current_fsuid();
inode->i_gid = opts->setgid ? opts->gid : current_fsgid();
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
init_special_inode(inode, S_IFCHR|opts->mode, device);
- inode->i_private = tty;
- tty->driver_data = inode;
+ inode->i_private = priv;
- sprintf(s, "%d", number);
+ sprintf(s, "%d", index);
mutex_lock(&root->d_inode->i_mutex);
fsnotify_create(root->d_inode, dentry);
} else {
iput(inode);
- ret = -ENOMEM;
+ inode = ERR_PTR(-ENOMEM);
}
mutex_unlock(&root->d_inode->i_mutex);
- return ret;
+ return inode;
}
-struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number)
+/**
+ * devpts_get_priv -- get private data for a slave
+ * @pts_inode: inode of the slave
+ *
+ * Returns whatever was passed as priv in devpts_pty_new for a given inode.
+ */
+void *devpts_get_priv(struct inode *pts_inode)
{
struct dentry *dentry;
- struct tty_struct *tty;
+ void *priv = NULL;
BUG_ON(pts_inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR));
if (!dentry)
return NULL;
- tty = NULL;
if (pts_inode->i_sb->s_magic == DEVPTS_SUPER_MAGIC)
- tty = (struct tty_struct *)pts_inode->i_private;
+ priv = pts_inode->i_private;
dput(dentry);
- return tty;
+ return priv;
}
-void devpts_pty_kill(struct tty_struct *tty)
+/**
+ * devpts_pty_kill -- remove inode form /dev/pts/
+ * @inode: inode of the slave to be removed
+ *
+ * This is an inverse operation of devpts_pty_new.
+ */
+void devpts_pty_kill(struct inode *inode)
{
- struct inode *inode = tty->driver_data;
struct super_block *sb = pts_sb_from_inode(inode);
struct dentry *root = sb->s_root;
struct dentry *dentry;
/* Tells if the epoll_ctl(2) operation needs an event copy from userspace */
static inline int ep_op_has_event(int op)
{
- return op == EPOLL_CTL_ADD || op == EPOLL_CTL_MOD;
+ return op != EPOLL_CTL_DEL;
}
/* Initialize the poll safe wake up structure */
return 0;
}
-/*
- * Disables a "struct epitem" in the eventpoll set. Returns -EBUSY if the item
- * had no event flags set, indicating that another thread may be currently
- * handling that item's events (in the case that EPOLLONESHOT was being
- * used). Otherwise a zero result indicates that the item has been disabled
- * from receiving events. A disabled item may be re-enabled via
- * EPOLL_CTL_MOD. Must be called with "mtx" held.
- */
-static int ep_disable(struct eventpoll *ep, struct epitem *epi)
-{
- int result = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&ep->lock, flags);
- if (epi->event.events & ~EP_PRIVATE_BITS) {
- if (ep_is_linked(&epi->rdllink))
- list_del_init(&epi->rdllink);
- /* Ensure ep_poll_callback will not add epi back onto ready
- list: */
- epi->event.events &= EP_PRIVATE_BITS;
- }
- else
- result = -EBUSY;
- spin_unlock_irqrestore(&ep->lock, flags);
-
- return result;
-}
-
static void ep_free(struct eventpoll *ep)
{
struct rb_node *rbp;
rb_insert_color(&epi->rbn, &ep->rbr);
}
+
+
#define PATH_ARR_SIZE 5
/*
* These are the number paths of length 1 to 5, that we are allowing to emanate
} else
error = -ENOENT;
break;
- case EPOLL_CTL_DISABLE:
- if (epi)
- error = ep_disable(ep, epi);
- else
- error = -ENOENT;
- break;
}
mutex_unlock(&ep->mtx);
"inode=%lu", ino + 1);
continue;
}
+ BUFFER_TRACE(inode_bitmap_bh, "get_write_access");
+ err = ext4_journal_get_write_access(handle, inode_bitmap_bh);
+ if (err)
+ goto fail;
ext4_lock_group(sb, group);
ret2 = ext4_test_and_set_bit(ino, inode_bitmap_bh->b_data);
ext4_unlock_group(sb, group);
goto out;
got:
+ BUFFER_TRACE(inode_bitmap_bh, "call ext4_handle_dirty_metadata");
+ err = ext4_handle_dirty_metadata(handle, NULL, inode_bitmap_bh);
+ if (err)
+ goto fail;
+
/* We may have to initialize the block bitmap if it isn't already */
if (ext4_has_group_desc_csum(sb) &&
gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
goto fail;
}
- BUFFER_TRACE(inode_bitmap_bh, "get_write_access");
- err = ext4_journal_get_write_access(handle, inode_bitmap_bh);
- if (err)
- goto fail;
-
BUFFER_TRACE(group_desc_bh, "get_write_access");
err = ext4_journal_get_write_access(handle, group_desc_bh);
if (err)
}
ext4_unlock_group(sb, group);
- BUFFER_TRACE(inode_bitmap_bh, "call ext4_handle_dirty_metadata");
- err = ext4_handle_dirty_metadata(handle, NULL, inode_bitmap_bh);
- if (err)
- goto fail;
-
BUFFER_TRACE(group_desc_bh, "call ext4_handle_dirty_metadata");
err = ext4_handle_dirty_metadata(handle, NULL, group_desc_bh);
if (err)
return __close_fd(files, fd);
if (fd >= rlimit(RLIMIT_NOFILE))
- return -EMFILE;
+ return -EBADF;
spin_lock(&files->file_lock);
err = expand_files(files, fd);
return -EINVAL;
if (newfd >= rlimit(RLIMIT_NOFILE))
- return -EMFILE;
+ return -EBADF;
spin_lock(&files->file_lock);
err = expand_files(files, newfd);
struct gfs2_holder i_gh;
int error;
- gfs2_holder_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
- error = gfs2_glock_nq(&i_gh);
- if (error == 0) {
- file_accessed(file);
- gfs2_glock_dq(&i_gh);
- }
- gfs2_holder_uninit(&i_gh);
+ error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY,
+ &i_gh);
if (error)
return error;
+ /* grab lock to update inode */
+ gfs2_glock_dq_uninit(&i_gh);
+ file_accessed(file);
}
vma->vm_ops = &gfs2_vm_ops;
size_t writesize = iov_length(iov, nr_segs);
struct dentry *dentry = file->f_dentry;
struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
- struct gfs2_sbd *sdp;
int ret;
- sdp = GFS2_SB(file->f_mapping->host);
ret = gfs2_rs_alloc(ip);
if (ret)
return ret;
struct gfs2_meta_header *mh;
struct gfs2_trans *tr;
- lock_buffer(bd->bd_bh);
- gfs2_log_lock(sdp);
tr = current->journal_info;
tr->tr_touched = 1;
if (!list_empty(&bd->bd_list))
- goto out;
+ return;
set_bit(GLF_LFLUSH, &bd->bd_gl->gl_flags);
set_bit(GLF_DIRTY, &bd->bd_gl->gl_flags);
mh = (struct gfs2_meta_header *)bd->bd_bh->b_data;
sdp->sd_log_num_buf++;
list_add(&bd->bd_list, &sdp->sd_log_le_buf);
tr->tr_num_buf_new++;
-out:
- gfs2_log_unlock(sdp);
- unlock_buffer(bd->bd_bh);
}
static void gfs2_check_magic(struct buffer_head *bh)
static void revoke_lo_before_commit(struct gfs2_sbd *sdp)
{
- struct gfs2_log_descriptor *ld;
struct gfs2_meta_header *mh;
unsigned int offset;
struct list_head *head = &sdp->sd_log_le_revoke;
length = gfs2_struct2blk(sdp, sdp->sd_log_num_revoke, sizeof(u64));
page = gfs2_get_log_desc(sdp, GFS2_LOG_DESC_REVOKE, length, sdp->sd_log_num_revoke);
- ld = page_address(page);
offset = sizeof(struct gfs2_log_descriptor);
list_for_each_entry(bd, head, bd_list) {
struct address_space *mapping = bd->bd_bh->b_page->mapping;
struct gfs2_inode *ip = GFS2_I(mapping->host);
- lock_buffer(bd->bd_bh);
- gfs2_log_lock(sdp);
if (tr)
tr->tr_touched = 1;
if (!list_empty(&bd->bd_list))
- goto out;
+ return;
set_bit(GLF_LFLUSH, &bd->bd_gl->gl_flags);
set_bit(GLF_DIRTY, &bd->bd_gl->gl_flags);
if (gfs2_is_jdata(ip)) {
} else {
list_add_tail(&bd->bd_list, &sdp->sd_log_le_ordered);
}
-out:
- gfs2_log_unlock(sdp);
- unlock_buffer(bd->bd_bh);
}
/**
struct gfs2_quota_data **qd;
int error;
- if (ip->i_res == NULL)
- gfs2_rs_alloc(ip);
+ if (ip->i_res == NULL) {
+ error = gfs2_rs_alloc(ip);
+ if (error)
+ return error;
+ }
qd = ip->i_res->rs_qa_qd;
*/
int gfs2_rs_alloc(struct gfs2_inode *ip)
{
- int error = 0;
struct gfs2_blkreserv *res;
if (ip->i_res)
res = kmem_cache_zalloc(gfs2_rsrv_cachep, GFP_NOFS);
if (!res)
- error = -ENOMEM;
+ return -ENOMEM;
RB_CLEAR_NODE(&res->rs_node);
else
ip->i_res = res;
up_write(&ip->i_rw_mutex);
- return error;
+ return 0;
}
static void dump_rs(struct seq_file *seq, const struct gfs2_blkreserv *rs)
int ret = 0;
u64 amt;
u64 trimmed = 0;
+ u64 start, end, minlen;
unsigned int x;
+ unsigned bs_shift = sdp->sd_sb.sb_bsize_shift;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
- if (argp == NULL) {
- r.start = 0;
- r.len = ULLONG_MAX;
- r.minlen = 0;
- } else if (copy_from_user(&r, argp, sizeof(r)))
+ if (copy_from_user(&r, argp, sizeof(r)))
return -EFAULT;
ret = gfs2_rindex_update(sdp);
if (ret)
return ret;
- rgd = gfs2_blk2rgrpd(sdp, r.start, 0);
- rgd_end = gfs2_blk2rgrpd(sdp, r.start + r.len, 0);
+ start = r.start >> bs_shift;
+ end = start + (r.len >> bs_shift);
+ minlen = max_t(u64, r.minlen,
+ q->limits.discard_granularity) >> bs_shift;
+
+ rgd = gfs2_blk2rgrpd(sdp, start, 0);
+ rgd_end = gfs2_blk2rgrpd(sdp, end - 1, 0);
+
+ if (end <= start ||
+ minlen > sdp->sd_max_rg_data ||
+ start > rgd_end->rd_data0 + rgd_end->rd_data)
+ return -EINVAL;
while (1) {
/* Trim each bitmap in the rgrp */
for (x = 0; x < rgd->rd_length; x++) {
struct gfs2_bitmap *bi = rgd->rd_bits + x;
- ret = gfs2_rgrp_send_discards(sdp, rgd->rd_data0, NULL, bi, r.minlen, &amt);
+ ret = gfs2_rgrp_send_discards(sdp,
+ rgd->rd_data0, NULL, bi, minlen,
+ &amt);
if (ret) {
gfs2_glock_dq_uninit(&gh);
goto out;
out:
r.len = trimmed << 9;
- if (argp && copy_to_user(argp, &r, sizeof(r)))
+ if (copy_to_user(argp, &r, sizeof(r)))
return -EFAULT;
return ret;
return;
}
need_unlock = 1;
- }
+ } else if (WARN_ON_ONCE(ip->i_gl->gl_state != LM_ST_EXCLUSIVE))
+ return;
if (current->journal_info == NULL) {
ret = gfs2_trans_begin(sdp, RES_DINODE, 0);
struct gfs2_sbd *sdp = gl->gl_sbd;
struct gfs2_bufdata *bd;
+ lock_buffer(bh);
+ gfs2_log_lock(sdp);
bd = bh->b_private;
if (bd)
gfs2_assert(sdp, bd->bd_gl == gl);
else {
+ gfs2_log_unlock(sdp);
+ unlock_buffer(bh);
gfs2_attach_bufdata(gl, bh, meta);
bd = bh->b_private;
+ lock_buffer(bh);
+ gfs2_log_lock(sdp);
}
lops_add(sdp, bd);
+ gfs2_log_unlock(sdp);
+ unlock_buffer(bh);
}
void gfs2_trans_add_revoke(struct gfs2_sbd *sdp, struct gfs2_bufdata *bd)
{
char buf1[NFS_DNS_HOSTNAME_MAXLEN+1];
struct nfs_dns_ent key, *item;
- unsigned long ttl;
+ unsigned int ttl;
ssize_t len;
int ret = -EINVAL;
key.namelen = len;
memset(&key.h, 0, sizeof(key.h));
- ttl = get_expiry(&buf);
+ if (get_uint(&buf, &ttl) < 0)
+ goto out;
if (ttl == 0)
goto out;
key.h.expiry_time = ttl + seconds_since_boot();
if (ctx->cred != NULL)
put_rpccred(ctx->cred);
dput(ctx->dentry);
- nfs_sb_deactive(sb);
+ if (is_sync)
+ nfs_sb_deactive(sb);
+ else
+ nfs_sb_deactive_async(sb);
kfree(ctx->mdsthreshold);
kfree(ctx);
}
extern void __exit unregister_nfs_fs(void);
extern void nfs_sb_active(struct super_block *sb);
extern void nfs_sb_deactive(struct super_block *sb);
+extern void nfs_sb_deactive_async(struct super_block *sb);
/* namespace.c */
+#define NFS_PATH_CANONICAL 1
extern char *nfs_path(char **p, struct dentry *dentry,
- char *buffer, ssize_t buflen);
+ char *buffer, ssize_t buflen, unsigned flags);
extern struct vfsmount *nfs_d_automount(struct path *path);
struct vfsmount *nfs_submount(struct nfs_server *, struct dentry *,
struct nfs_fh *, struct nfs_fattr *);
char *buffer, ssize_t buflen)
{
char *dummy;
- return nfs_path(&dummy, dentry, buffer, buflen);
+ return nfs_path(&dummy, dentry, buffer, buflen, NFS_PATH_CANONICAL);
}
/*
else
msg.rpc_proc = &mnt_clnt->cl_procinfo[MOUNTPROC_MNT];
- status = rpc_call_sync(mnt_clnt, &msg, 0);
+ status = rpc_call_sync(mnt_clnt, &msg, RPC_TASK_SOFT|RPC_TASK_TIMEOUT);
rpc_shutdown_client(mnt_clnt);
if (status < 0)
* @dentry - pointer to dentry
* @buffer - result buffer
* @buflen - length of buffer
+ * @flags - options (see below)
*
* Helper function for constructing the server pathname
* by arbitrary hashed dentry.
* This is mainly for use in figuring out the path on the
* server side when automounting on top of an existing partition
* and in generating /proc/mounts and friends.
+ *
+ * Supported flags:
+ * NFS_PATH_CANONICAL: ensure there is exactly one slash after
+ * the original device (export) name
+ * (if unset, the original name is returned verbatim)
*/
-char *nfs_path(char **p, struct dentry *dentry, char *buffer, ssize_t buflen)
+char *nfs_path(char **p, struct dentry *dentry, char *buffer, ssize_t buflen,
+ unsigned flags)
{
char *end;
int namelen;
rcu_read_unlock();
goto rename_retry;
}
- if (*end != '/') {
+ if ((flags & NFS_PATH_CANONICAL) && *end != '/') {
if (--buflen < 0) {
spin_unlock(&dentry->d_lock);
rcu_read_unlock();
return end;
}
namelen = strlen(base);
- /* Strip off excess slashes in base string */
- while (namelen > 0 && base[namelen - 1] == '/')
- namelen--;
+ if (flags & NFS_PATH_CANONICAL) {
+ /* Strip off excess slashes in base string */
+ while (namelen > 0 && base[namelen - 1] == '/')
+ namelen--;
+ }
buflen -= namelen;
if (buflen < 0) {
spin_unlock(&dentry->d_lock);
static char *nfs4_path(struct dentry *dentry, char *buffer, ssize_t buflen)
{
char *limit;
- char *path = nfs_path(&limit, dentry, buffer, buflen);
+ char *path = nfs_path(&limit, dentry, buffer, buflen,
+ NFS_PATH_CANONICAL);
if (!IS_ERR(path)) {
char *path_component = nfs_path_component(path, limit);
if (path_component)
dprintk("%s ERROR: %d Reset session\n", __func__,
errorcode);
nfs4_schedule_session_recovery(clp->cl_session, errorcode);
- exception->retry = 1;
- break;
+ goto wait_on_recovery;
#endif /* defined(CONFIG_NFS_V4_1) */
case -NFS4ERR_FILE_OPEN:
if (exception->timeout > HZ) {
data->timestamp = jiffies;
if (nfs4_setup_sequence(data->o_arg.server,
&data->o_arg.seq_args,
- &data->o_res.seq_res, task))
- return;
- rpc_call_start(task);
+ &data->o_res.seq_res,
+ task) != 0)
+ nfs_release_seqid(data->o_arg.seqid);
+ else
+ rpc_call_start(task);
return;
unlock_no_action:
rcu_read_unlock();
/* even though OPEN succeeded, access is denied. Close the file */
nfs4_close_state(state, fmode);
- return -NFS4ERR_ACCESS;
+ return -EACCES;
}
/*
nfs4_put_open_state(calldata->state);
nfs_free_seqid(calldata->arg.seqid);
nfs4_put_state_owner(sp);
- nfs_sb_deactive(sb);
+ nfs_sb_deactive_async(sb);
kfree(calldata);
}
if (nfs4_setup_sequence(NFS_SERVER(inode),
&calldata->arg.seq_args,
&calldata->res.seq_res,
- task))
- goto out;
- rpc_call_start(task);
+ task) != 0)
+ nfs_release_seqid(calldata->arg.seqid);
+ else
+ rpc_call_start(task);
out:
dprintk("%s: done!\n", __func__);
}
if (nfs4_async_handle_error(task, calldata->server, NULL) == -EAGAIN)
rpc_restart_call_prepare(task);
}
+ nfs_release_seqid(calldata->arg.seqid);
}
static void nfs4_locku_prepare(struct rpc_task *task, void *data)
calldata->timestamp = jiffies;
if (nfs4_setup_sequence(calldata->server,
&calldata->arg.seq_args,
- &calldata->res.seq_res, task))
- return;
- rpc_call_start(task);
+ &calldata->res.seq_res,
+ task) != 0)
+ nfs_release_seqid(calldata->arg.seqid);
+ else
+ rpc_call_start(task);
}
static const struct rpc_call_ops nfs4_locku_ops = {
/* Do we need to do an open_to_lock_owner? */
if (!(data->arg.lock_seqid->sequence->flags & NFS_SEQID_CONFIRMED)) {
if (nfs_wait_on_sequence(data->arg.open_seqid, task) != 0)
- return;
+ goto out_release_lock_seqid;
data->arg.open_stateid = &state->stateid;
data->arg.new_lock_owner = 1;
data->res.open_seqid = data->arg.open_seqid;
data->timestamp = jiffies;
if (nfs4_setup_sequence(data->server,
&data->arg.seq_args,
- &data->res.seq_res, task))
+ &data->res.seq_res,
+ task) == 0) {
+ rpc_call_start(task);
return;
- rpc_call_start(task);
- dprintk("%s: done!, ret = %d\n", __func__, data->rpc_status);
+ }
+ nfs_release_seqid(data->arg.open_seqid);
+out_release_lock_seqid:
+ nfs_release_seqid(data->arg.lock_seqid);
+ dprintk("%s: done!, ret = %d\n", __func__, task->tk_status);
}
static void nfs4_recover_lock_prepare(struct rpc_task *task, void *calldata)
tbl->slots = new;
tbl->max_slots = max_slots;
}
- tbl->highest_used_slotid = -1; /* no slot is currently used */
+ tbl->highest_used_slotid = NFS4_NO_SLOT;
for (i = 0; i < tbl->max_slots; i++)
tbl->slots[i].seq_nr = ivalue;
spin_unlock(&tbl->slot_tbl_lock);
if (likely(nfsi->layout == NULL)) { /* Won the race? */
nfsi->layout = new;
return new;
- }
- pnfs_free_layout_hdr(new);
+ } else if (new != NULL)
+ pnfs_free_layout_hdr(new);
out_existing:
pnfs_get_layout_hdr(nfsi->layout);
return nfsi->layout;
#include <linux/parser.h>
#include <linux/nsproxy.h>
#include <linux/rcupdate.h>
+#include <linux/kthread.h>
#include <asm/uaccess.h>
}
EXPORT_SYMBOL_GPL(nfs_sb_deactive);
+static int nfs_deactivate_super_async_work(void *ptr)
+{
+ struct super_block *sb = ptr;
+
+ deactivate_super(sb);
+ module_put_and_exit(0);
+ return 0;
+}
+
+/*
+ * same effect as deactivate_super, but will do final unmount in kthread
+ * context
+ */
+static void nfs_deactivate_super_async(struct super_block *sb)
+{
+ struct task_struct *task;
+ char buf[INET6_ADDRSTRLEN + 1];
+ struct nfs_server *server = NFS_SB(sb);
+ struct nfs_client *clp = server->nfs_client;
+
+ if (!atomic_add_unless(&sb->s_active, -1, 1)) {
+ rcu_read_lock();
+ snprintf(buf, sizeof(buf),
+ rpc_peeraddr2str(clp->cl_rpcclient, RPC_DISPLAY_ADDR));
+ rcu_read_unlock();
+
+ __module_get(THIS_MODULE);
+ task = kthread_run(nfs_deactivate_super_async_work, sb,
+ "%s-deactivate-super", buf);
+ if (IS_ERR(task)) {
+ pr_err("%s: kthread_run: %ld\n",
+ __func__, PTR_ERR(task));
+ /* make synchronous call and hope for the best */
+ deactivate_super(sb);
+ module_put(THIS_MODULE);
+ }
+ }
+}
+
+void nfs_sb_deactive_async(struct super_block *sb)
+{
+ struct nfs_server *server = NFS_SB(sb);
+
+ if (atomic_dec_and_test(&server->active))
+ nfs_deactivate_super_async(sb);
+}
+EXPORT_SYMBOL_GPL(nfs_sb_deactive_async);
+
/*
* Deliver file system statistics to userspace
*/
int err = 0;
if (!page)
return -ENOMEM;
- devname = nfs_path(&dummy, root, page, PAGE_SIZE);
+ devname = nfs_path(&dummy, root, page, PAGE_SIZE, 0);
if (IS_ERR(devname))
err = PTR_ERR(devname);
else
nfs_dec_sillycount(data->dir);
nfs_free_unlinkdata(data);
- nfs_sb_deactive(sb);
+ nfs_sb_deactive_async(sb);
}
static void nfs_unlink_prepare(struct rpc_task *task, void *calldata)
if ((old->path.mnt == new->path.mnt) &&
(old->path.dentry == new->path.dentry))
return true;
+ break;
case (FSNOTIFY_EVENT_NONE):
return true;
default:
/*
* Initialize the args structure.
*/
+ memset(&targs, 0, sizeof(targs));
targs.tp = tp;
targs.mp = mp;
targs.agbp = agbp;
* group or loop over the allocation groups to find the result.
*/
int /* error */
-__xfs_alloc_vextent(
+xfs_alloc_vextent(
xfs_alloc_arg_t *args) /* allocation argument structure */
{
xfs_agblock_t agsize; /* allocation group size */
return error;
}
-static void
-xfs_alloc_vextent_worker(
- struct work_struct *work)
-{
- struct xfs_alloc_arg *args = container_of(work,
- struct xfs_alloc_arg, work);
- unsigned long pflags;
-
- /* we are in a transaction context here */
- current_set_flags_nested(&pflags, PF_FSTRANS);
-
- args->result = __xfs_alloc_vextent(args);
- complete(args->done);
-
- current_restore_flags_nested(&pflags, PF_FSTRANS);
-}
-
-/*
- * Data allocation requests often come in with little stack to work on. Push
- * them off to a worker thread so there is lots of stack to use. Metadata
- * requests, OTOH, are generally from low stack usage paths, so avoid the
- * context switch overhead here.
- */
-int
-xfs_alloc_vextent(
- struct xfs_alloc_arg *args)
-{
- DECLARE_COMPLETION_ONSTACK(done);
-
- if (!args->userdata)
- return __xfs_alloc_vextent(args);
-
-
- args->done = &done;
- INIT_WORK_ONSTACK(&args->work, xfs_alloc_vextent_worker);
- queue_work(xfs_alloc_wq, &args->work);
- wait_for_completion(&done);
- return args->result;
-}
-
/*
* Free an extent.
* Just break up the extent address and hand off to xfs_free_ag_extent
char isfl; /* set if is freelist blocks - !acctg */
char userdata; /* set if this is user data */
xfs_fsblock_t firstblock; /* io first block allocated */
- struct completion *done;
- struct work_struct work;
- int result;
} xfs_alloc_arg_t;
/*
xfs_extent_busy_insert(cur->bc_tp, be32_to_cpu(agf->agf_seqno), bno, 1,
XFS_EXTENT_BUSY_SKIP_DISCARD);
xfs_trans_agbtree_delta(cur->bc_tp, -1);
+
+ xfs_trans_binval(cur->bc_tp, bp);
return 0;
}
* Normal allocation, done through xfs_alloc_vextent.
*/
tryagain = isaligned = 0;
+ memset(&args, 0, sizeof(args));
args.tp = ap->tp;
args.mp = mp;
args.fsbno = ap->blkno;
* Convert to a btree with two levels, one record in root.
*/
XFS_IFORK_FMT_SET(ip, whichfork, XFS_DINODE_FMT_BTREE);
+ memset(&args, 0, sizeof(args));
args.tp = tp;
args.mp = mp;
args.firstblock = *firstblock;
xfs_buf_t *bp; /* buffer for extent block */
xfs_bmbt_rec_host_t *ep;/* extent record pointer */
+ memset(&args, 0, sizeof(args));
args.tp = tp;
args.mp = ip->i_mount;
args.firstblock = *firstblock;
STATIC int
-xfs_bmapi_allocate(
- struct xfs_bmalloca *bma,
- int flags)
+__xfs_bmapi_allocate(
+ struct xfs_bmalloca *bma)
{
struct xfs_mount *mp = bma->ip->i_mount;
- int whichfork = (flags & XFS_BMAPI_ATTRFORK) ?
+ int whichfork = (bma->flags & XFS_BMAPI_ATTRFORK) ?
XFS_ATTR_FORK : XFS_DATA_FORK;
struct xfs_ifork *ifp = XFS_IFORK_PTR(bma->ip, whichfork);
int tmp_logflags = 0;
* Indicate if this is the first user data in the file, or just any
* user data.
*/
- if (!(flags & XFS_BMAPI_METADATA)) {
+ if (!(bma->flags & XFS_BMAPI_METADATA)) {
bma->userdata = (bma->offset == 0) ?
XFS_ALLOC_INITIAL_USER_DATA : XFS_ALLOC_USERDATA;
}
- bma->minlen = (flags & XFS_BMAPI_CONTIG) ? bma->length : 1;
+ bma->minlen = (bma->flags & XFS_BMAPI_CONTIG) ? bma->length : 1;
/*
* Only want to do the alignment at the eof if it is userdata and
* allocation length is larger than a stripe unit.
*/
if (mp->m_dalign && bma->length >= mp->m_dalign &&
- !(flags & XFS_BMAPI_METADATA) && whichfork == XFS_DATA_FORK) {
+ !(bma->flags & XFS_BMAPI_METADATA) && whichfork == XFS_DATA_FORK) {
error = xfs_bmap_isaeof(bma, whichfork);
if (error)
return error;
}
+ if (bma->flags & XFS_BMAPI_STACK_SWITCH)
+ bma->stack_switch = 1;
+
error = xfs_bmap_alloc(bma);
if (error)
return error;
* A wasdelay extent has been initialized, so shouldn't be flagged
* as unwritten.
*/
- if (!bma->wasdel && (flags & XFS_BMAPI_PREALLOC) &&
+ if (!bma->wasdel && (bma->flags & XFS_BMAPI_PREALLOC) &&
xfs_sb_version_hasextflgbit(&mp->m_sb))
bma->got.br_state = XFS_EXT_UNWRITTEN;
return 0;
}
+static void
+xfs_bmapi_allocate_worker(
+ struct work_struct *work)
+{
+ struct xfs_bmalloca *args = container_of(work,
+ struct xfs_bmalloca, work);
+ unsigned long pflags;
+
+ /* we are in a transaction context here */
+ current_set_flags_nested(&pflags, PF_FSTRANS);
+
+ args->result = __xfs_bmapi_allocate(args);
+ complete(args->done);
+
+ current_restore_flags_nested(&pflags, PF_FSTRANS);
+}
+
+/*
+ * Some allocation requests often come in with little stack to work on. Push
+ * them off to a worker thread so there is lots of stack to use. Otherwise just
+ * call directly to avoid the context switch overhead here.
+ */
+int
+xfs_bmapi_allocate(
+ struct xfs_bmalloca *args)
+{
+ DECLARE_COMPLETION_ONSTACK(done);
+
+ if (!args->stack_switch)
+ return __xfs_bmapi_allocate(args);
+
+
+ args->done = &done;
+ INIT_WORK_ONSTACK(&args->work, xfs_bmapi_allocate_worker);
+ queue_work(xfs_alloc_wq, &args->work);
+ wait_for_completion(&done);
+ return args->result;
+}
+
STATIC int
xfs_bmapi_convert_unwritten(
struct xfs_bmalloca *bma,
bma.conv = !!(flags & XFS_BMAPI_CONVERT);
bma.wasdel = wasdelay;
bma.offset = bno;
+ bma.flags = flags;
/*
* There's a 32/64 bit type mismatch between the
ASSERT(len > 0);
ASSERT(bma.length > 0);
- error = xfs_bmapi_allocate(&bma, flags);
+ error = xfs_bmapi_allocate(&bma);
if (error)
goto error0;
if (bma.blkno == NULLFSBLOCK)
* from written to unwritten, otherwise convert from unwritten to written.
*/
#define XFS_BMAPI_CONVERT 0x040
+#define XFS_BMAPI_STACK_SWITCH 0x080
#define XFS_BMAPI_FLAGS \
{ XFS_BMAPI_ENTIRE, "ENTIRE" }, \
{ XFS_BMAPI_PREALLOC, "PREALLOC" }, \
{ XFS_BMAPI_IGSTATE, "IGSTATE" }, \
{ XFS_BMAPI_CONTIG, "CONTIG" }, \
- { XFS_BMAPI_CONVERT, "CONVERT" }
+ { XFS_BMAPI_CONVERT, "CONVERT" }, \
+ { XFS_BMAPI_STACK_SWITCH, "STACK_SWITCH" }
static inline int xfs_bmapi_aflag(int w)
char userdata;/* set if is user data */
char aeof; /* allocated space at eof */
char conv; /* overwriting unwritten extents */
+ char stack_switch;
+ int flags;
+ struct completion *done;
+ struct work_struct work;
+ int result;
} xfs_bmalloca_t;
/*
}
xfs_buf_relse(bp);
} else if (freed && remove) {
+ /*
+ * There are currently two references to the buffer - the active
+ * LRU reference and the buf log item. What we are about to do
+ * here - simulate a failed IO completion - requires 3
+ * references.
+ *
+ * The LRU reference is removed by the xfs_buf_stale() call. The
+ * buf item reference is removed by the xfs_buf_iodone()
+ * callback that is run by xfs_buf_do_callbacks() during ioend
+ * processing (via the bp->b_iodone callback), and then finally
+ * the ioend processing will drop the IO reference if the buffer
+ * is marked XBF_ASYNC.
+ *
+ * Hence we need to take an additional reference here so that IO
+ * completion processing doesn't free the buffer prematurely.
+ */
xfs_buf_lock(bp);
+ xfs_buf_hold(bp);
+ bp->b_flags |= XBF_ASYNC;
xfs_buf_ioerror(bp, EIO);
XFS_BUF_UNDONE(bp);
xfs_buf_stale(bp);
/* update secondary superblocks. */
for (agno = 1; agno < nagcount; agno++) {
- error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp,
+ error = 0;
+ /*
+ * new secondary superblocks need to be zeroed, not read from
+ * disk as the contents of the new area we are growing into is
+ * completely unknown.
+ */
+ if (agno < oagcount) {
+ error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp,
XFS_AGB_TO_DADDR(mp, agno, XFS_SB_BLOCK(mp)),
XFS_FSS_TO_BB(mp, 1), 0, &bp);
+ } else {
+ bp = xfs_trans_get_buf(NULL, mp->m_ddev_targp,
+ XFS_AGB_TO_DADDR(mp, agno, XFS_SB_BLOCK(mp)),
+ XFS_FSS_TO_BB(mp, 1), 0);
+ if (bp)
+ xfs_buf_zero(bp, 0, BBTOB(bp->b_length));
+ else
+ error = ENOMEM;
+ }
+
if (error) {
xfs_warn(mp,
"error %d reading secondary superblock for ag %d",
break; /* no point in continuing */
}
}
- return 0;
+ return error;
error0:
xfs_trans_cancel(tp, XFS_TRANS_ABORT);
/* boundary */
struct xfs_perag *pag;
+ memset(&args, 0, sizeof(args));
args.tp = tp;
args.mp = tp->t_mountp;
* to mark all the active inodes on the buffer stale.
*/
bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, blkno,
- mp->m_bsize * blks_per_cluster, 0);
+ mp->m_bsize * blks_per_cluster,
+ XBF_UNMAPPED);
if (!bp)
return ENOMEM;
int hsize;
xfs_handle_t handle;
struct inode *inode;
- struct fd f;
+ struct fd f = {0};
struct path path;
int error;
struct xfs_inode *ip;
* pointer that the caller gave to us.
*/
error = xfs_bmapi_write(tp, ip, map_start_fsb,
- count_fsb, 0, &first_block, 1,
+ count_fsb,
+ XFS_BMAPI_STACK_SWITCH,
+ &first_block, 1,
imap, &nimaps, &free_list);
if (error)
goto trans_cancel;
/*
- * update the last_sync_lsn before we drop the
+ * Completion of a iclog IO does not imply that
+ * a transaction has completed, as transactions
+ * can be large enough to span many iclogs. We
+ * cannot change the tail of the log half way
+ * through a transaction as this may be the only
+ * transaction in the log and moving th etail to
+ * point to the middle of it will prevent
+ * recovery from finding the start of the
+ * transaction. Hence we should only update the
+ * last_sync_lsn if this iclog contains
+ * transaction completion callbacks on it.
+ *
+ * We have to do this before we drop the
* icloglock to ensure we are the only one that
* can update it.
*/
ASSERT(XFS_LSN_CMP(atomic64_read(&log->l_last_sync_lsn),
be64_to_cpu(iclog->ic_header.h_lsn)) <= 0);
- atomic64_set(&log->l_last_sync_lsn,
- be64_to_cpu(iclog->ic_header.h_lsn));
+ if (iclog->ic_callback)
+ atomic64_set(&log->l_last_sync_lsn,
+ be64_to_cpu(iclog->ic_header.h_lsn));
} else
ioerrors++;
* - order is important.
*/
error = xlog_bread_offset(log, 0,
- bblks - split_bblks, hbp,
+ bblks - split_bblks, dbp,
offset + BBTOB(split_bblks));
if (error)
goto bread_err2;
int devpts_new_index(struct inode *ptmx_inode);
void devpts_kill_index(struct inode *ptmx_inode, int idx);
/* mknod in devpts */
-int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty);
-/* get tty structure */
-struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number);
+struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index,
+ void *priv);
+/* get private structure */
+void *devpts_get_priv(struct inode *pts_inode);
/* unlink */
-void devpts_pty_kill(struct tty_struct *tty);
+void devpts_pty_kill(struct inode *inode);
#else
/* Dummy stubs in the no-pty case */
static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; }
static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { }
-static inline int devpts_pty_new(struct inode *ptmx_inode,
- struct tty_struct *tty)
+static inline struct inode *devpts_pty_new(struct inode *ptmx_inode,
+ dev_t device, int index, void *priv)
{
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
-static inline struct tty_struct *devpts_get_tty(struct inode *pts_inode,
- int number)
+static inline void *devpts_get_priv(struct inode *pts_inode)
{
return NULL;
}
-static inline void devpts_pty_kill(struct tty_struct *tty) { }
+static inline void devpts_pty_kill(struct inode *inode) { }
#endif
* published by the Free Software Foundation.
*/
-#ifndef _IPU_H_
-#define _IPU_H_
+#ifndef __LINUX_DMA_IPU_DMA_H
+#define __LINUX_DMA_IPU_DMA_H
#include <linux/types.h>
#include <linux/dmaengine.h>
#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd)
#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan)
-#endif
+#endif /* __LINUX_DMA_IPU_DMA_H */
--- /dev/null
+/*
+ * Statically sized hash table implementation
+ * (C) 2012 Sasha Levin <levinsasha928@gmail.com>
+ */
+
+#ifndef _LINUX_HASHTABLE_H
+#define _LINUX_HASHTABLE_H
+
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/hash.h>
+#include <linux/rculist.h>
+
+#define DEFINE_HASHTABLE(name, bits) \
+ struct hlist_head name[1 << (bits)] = \
+ { [0 ... ((1 << (bits)) - 1)] = HLIST_HEAD_INIT }
+
+#define DECLARE_HASHTABLE(name, bits) \
+ struct hlist_head name[1 << (bits)]
+
+#define HASH_SIZE(name) (ARRAY_SIZE(name))
+#define HASH_BITS(name) ilog2(HASH_SIZE(name))
+
+/* Use hash_32 when possible to allow for fast 32bit hashing in 64bit kernels. */
+#define hash_min(val, bits) \
+ (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits))
+
+static inline void __hash_init(struct hlist_head *ht, unsigned int sz)
+{
+ unsigned int i;
+
+ for (i = 0; i < sz; i++)
+ INIT_HLIST_HEAD(&ht[i]);
+}
+
+/**
+ * hash_init - initialize a hash table
+ * @hashtable: hashtable to be initialized
+ *
+ * Calculates the size of the hashtable from the given parameter, otherwise
+ * same as hash_init_size.
+ *
+ * This has to be a macro since HASH_BITS() will not work on pointers since
+ * it calculates the size during preprocessing.
+ */
+#define hash_init(hashtable) __hash_init(hashtable, HASH_SIZE(hashtable))
+
+/**
+ * hash_add - add an object to a hashtable
+ * @hashtable: hashtable to add to
+ * @node: the &struct hlist_node of the object to be added
+ * @key: the key of the object to be added
+ */
+#define hash_add(hashtable, node, key) \
+ hlist_add_head(node, &hashtable[hash_min(key, HASH_BITS(hashtable))])
+
+/**
+ * hash_add_rcu - add an object to a rcu enabled hashtable
+ * @hashtable: hashtable to add to
+ * @node: the &struct hlist_node of the object to be added
+ * @key: the key of the object to be added
+ */
+#define hash_add_rcu(hashtable, node, key) \
+ hlist_add_head_rcu(node, &hashtable[hash_min(key, HASH_BITS(hashtable))])
+
+/**
+ * hash_hashed - check whether an object is in any hashtable
+ * @node: the &struct hlist_node of the object to be checked
+ */
+static inline bool hash_hashed(struct hlist_node *node)
+{
+ return !hlist_unhashed(node);
+}
+
+static inline bool __hash_empty(struct hlist_head *ht, unsigned int sz)
+{
+ unsigned int i;
+
+ for (i = 0; i < sz; i++)
+ if (!hlist_empty(&ht[i]))
+ return false;
+
+ return true;
+}
+
+/**
+ * hash_empty - check whether a hashtable is empty
+ * @hashtable: hashtable to check
+ *
+ * This has to be a macro since HASH_BITS() will not work on pointers since
+ * it calculates the size during preprocessing.
+ */
+#define hash_empty(hashtable) __hash_empty(hashtable, HASH_SIZE(hashtable))
+
+/**
+ * hash_del - remove an object from a hashtable
+ * @node: &struct hlist_node of the object to remove
+ */
+static inline void hash_del(struct hlist_node *node)
+{
+ hlist_del_init(node);
+}
+
+/**
+ * hash_del_rcu - remove an object from a rcu enabled hashtable
+ * @node: &struct hlist_node of the object to remove
+ */
+static inline void hash_del_rcu(struct hlist_node *node)
+{
+ hlist_del_init_rcu(node);
+}
+
+/**
+ * hash_for_each - iterate over a hashtable
+ * @name: hashtable to iterate
+ * @bkt: integer to use as bucket loop cursor
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @obj: the type * to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ */
+#define hash_for_each(name, bkt, node, obj, member) \
+ for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\
+ hlist_for_each_entry(obj, node, &name[bkt], member)
+
+/**
+ * hash_for_each_rcu - iterate over a rcu enabled hashtable
+ * @name: hashtable to iterate
+ * @bkt: integer to use as bucket loop cursor
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @obj: the type * to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ */
+#define hash_for_each_rcu(name, bkt, node, obj, member) \
+ for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\
+ hlist_for_each_entry_rcu(obj, node, &name[bkt], member)
+
+/**
+ * hash_for_each_safe - iterate over a hashtable safe against removal of
+ * hash entry
+ * @name: hashtable to iterate
+ * @bkt: integer to use as bucket loop cursor
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @tmp: a &struct used for temporary storage
+ * @obj: the type * to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ */
+#define hash_for_each_safe(name, bkt, node, tmp, obj, member) \
+ for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\
+ hlist_for_each_entry_safe(obj, node, tmp, &name[bkt], member)
+
+/**
+ * hash_for_each_possible - iterate over all possible objects hashing to the
+ * same bucket
+ * @name: hashtable to iterate
+ * @obj: the type * to use as a loop cursor for each entry
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ * @key: the key of the objects to iterate over
+ */
+#define hash_for_each_possible(name, obj, node, member, key) \
+ hlist_for_each_entry(obj, node, &name[hash_min(key, HASH_BITS(name))], member)
+
+/**
+ * hash_for_each_possible_rcu - iterate over all possible objects hashing to the
+ * same bucket in an rcu enabled hashtable
+ * in a rcu enabled hashtable
+ * @name: hashtable to iterate
+ * @obj: the type * to use as a loop cursor for each entry
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ * @key: the key of the objects to iterate over
+ */
+#define hash_for_each_possible_rcu(name, obj, node, member, key) \
+ hlist_for_each_entry_rcu(obj, node, &name[hash_min(key, HASH_BITS(name))], member)
+
+/**
+ * hash_for_each_possible_safe - iterate over all possible objects hashing to the
+ * same bucket safe against removals
+ * @name: hashtable to iterate
+ * @obj: the type * to use as a loop cursor for each entry
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @tmp: a &struct used for temporary storage
+ * @member: the name of the hlist_node within the struct
+ * @key: the key of the objects to iterate over
+ */
+#define hash_for_each_possible_safe(name, obj, node, tmp, member, key) \
+ hlist_for_each_entry_safe(obj, node, tmp, \
+ &name[hash_min(key, HASH_BITS(name))], member)
+
+
+#endif
*/
#define KVM_MEMSLOT_INVALID (1UL << 16)
-/*
- * If we support unaligned MMIO, at most one fragment will be split into two:
- */
-#ifdef KVM_UNALIGNED_MMIO
-# define KVM_EXTRA_MMIO_FRAGMENTS 1
-#else
-# define KVM_EXTRA_MMIO_FRAGMENTS 0
-#endif
-
-#define KVM_USER_MMIO_SIZE 8
-
-#define KVM_MAX_MMIO_FRAGMENTS \
- (KVM_MMIO_SIZE / KVM_USER_MMIO_SIZE + KVM_EXTRA_MMIO_FRAGMENTS)
+/* Two fragments for cross MMIO pages. */
+#define KVM_MAX_MMIO_FRAGMENTS 2
/*
* For the normal pfn, the highest 12 bits should be zero,
/*
- * arch/arm/plat-omap/include/mach/menelaus.h
- *
* Functions to access Menelaus power management chip
*/
dma_addr_t sg_dma;
void *sg_cpu;
- struct dw_mci_dma_ops *dma_ops;
+ const struct dw_mci_dma_ops *dma_ops;
#ifdef CONFIG_MMC_DW_IDMAC
unsigned int ring_size;
#else
u16 data_offset;
struct device *dev;
struct dw_mci_board *pdata;
- struct dw_mci_drv_data *drv_data;
+ const struct dw_mci_drv_data *drv_data;
void *priv;
struct clk *biu_clk;
struct clk *ciu_clk;
struct regulator *vmmc; /* Power regulator */
unsigned long irq_flags; /* IRQ flags */
- unsigned int irq;
+ int irq;
};
/* DMA ops for Internal/External DMAC interface */
unsigned int quirks2; /* More deviations from spec. */
#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0)
+#define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
#endif
#else /* CONFIG_OF_ADDRESS */
+#ifndef of_address_to_resource
static inline int of_address_to_resource(struct device_node *dev, int index,
struct resource *r)
{
return -EINVAL;
}
+#endif
static inline struct device_node *of_find_matching_node_by_address(
struct device_node *from,
const struct of_device_id *matches,
void (*ac97_warm_reset)(struct snd_ac97 *ac97);
};
+extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
+
#endif /* __MACH_SSI_H */
static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
{
return strstr(dev_name(chan->device->dev), "sdma") ||
- !strcmp(dev_name(chan->device->dev), "imx-dma");
+ !strcmp(dev_name(chan->device->dev), "imx1-dma") ||
+ !strcmp(dev_name(chan->device->dev), "imx21-dma") ||
+ !strcmp(dev_name(chan->device->dev), "imx27-dma");
}
#endif
#include <linux/io.h>
#include <linux/platform_device.h>
-#include <mach/irqs.h>
#define OMAP1_MPUIO_BASE 0xfffb5000
/*
- * arch/arm/plat-omap/include/mach/led.h
- *
* Copyright (C) 2006 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
* published by the Free Software Foundation.
*/
-#ifndef __OMAP2_MMC_H
-#define __OMAP2_MMC_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-
-#include <plat/omap_hwmod.h>
-
-#define OMAP15XX_NR_MMC 1
-#define OMAP16XX_NR_MMC 2
-#define OMAP1_MMC_SIZE 0x080
-#define OMAP1_MMC1_BASE 0xfffb7800
-#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */
-
-#define OMAP24XX_NR_MMC 2
-#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
-#define OMAP2_MMC1_BASE 0x4809c000
-
-#define OMAP4_MMC_REG_OFFSET 0x100
-
#define OMAP_MMC_MAX_SLOTS 2
/*
#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0)
#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1)
+struct mmc_card;
+
struct omap_mmc_dev_attr {
u8 flags;
};
/* we can put the features above into this variable */
#define HSMMC_HAS_PBIAS (1 << 0)
#define HSMMC_HAS_UPDATED_RESET (1 << 1)
+#define MMC_OMAP7XX (1 << 2)
+#define MMC_OMAP15XX (1 << 3)
+#define MMC_OMAP16XX (1 << 4)
unsigned features;
int switch_pin; /* gpio (card detect) */
} slots[OMAP_MMC_MAX_SLOTS];
};
-
-/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
- int is_closed);
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
- int nr_controllers);
-void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-#else
-static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
- int nr_controllers)
-{
-}
-static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-}
-#endif
-
-extern int omap_msdi_reset(struct omap_hwmod *oh);
-
-#endif
* published by the Free Software Foundation.
*/
-#include <plat/gpmc.h>
+#ifndef _MTD_NAND_OMAP2_H
+#define _MTD_NAND_OMAP2_H
+
#include <linux/mtd/partitions.h>
+#define GPMC_BCH_NUM_REMAINDER 8
+
enum nand_io {
NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */
NAND_OMAP_POLLED, /* polled mode, without prefetch */
NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */
};
+enum omap_ecc {
+ /* 1-bit ecc: stored at end of spare area */
+ OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+ /* 1-bit ecc: stored at beginning of spare area as romcode */
+ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+ OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
+ OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
+};
+
+struct gpmc_nand_regs {
+ void __iomem *gpmc_status;
+ void __iomem *gpmc_nand_command;
+ void __iomem *gpmc_nand_address;
+ void __iomem *gpmc_nand_data;
+ void __iomem *gpmc_prefetch_config1;
+ void __iomem *gpmc_prefetch_config2;
+ void __iomem *gpmc_prefetch_control;
+ void __iomem *gpmc_prefetch_status;
+ void __iomem *gpmc_ecc_config;
+ void __iomem *gpmc_ecc_control;
+ void __iomem *gpmc_ecc_size_config;
+ void __iomem *gpmc_ecc1_result;
+ void __iomem *gpmc_bch_result0[GPMC_BCH_NUM_REMAINDER];
+ void __iomem *gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER];
+ void __iomem *gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER];
+ void __iomem *gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER];
+};
+
struct omap_nand_platform_data {
int cs;
struct mtd_partition *parts;
- struct gpmc_timings *gpmc_t;
int nr_parts;
bool dev_ready;
enum nand_io xfer_type;
struct gpmc_nand_regs reg;
};
-/* minimum size for IO mapping */
-#define NAND_IO_SIZE 4
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
-{
- return 0;
-}
#endif
* published by the Free Software Foundation.
*/
+#ifndef __MTD_ONENAND_OMAP2_H
+#define __MTD_ONENAND_OMAP2_H
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#define ONENAND_SYNC_READ (1 << 0)
#define ONENAND_SYNC_READWRITE (1 << 1)
-
-struct onenand_freq_info {
- u16 maf_id;
- u16 dev_id;
- u16 ver_id;
-};
+#define ONENAND_IN_OMAP34XX (1 << 2)
struct omap_onenand_platform_data {
int cs;
struct mtd_partition *parts;
int nr_parts;
int (*onenand_setup)(void __iomem *, int *freq_ptr);
- int (*get_freq)(const struct onenand_freq_info *freq_info,
- bool *clk_dep);
int dma_channel;
u8 flags;
u8 regulator_can_sleep;
u8 skip_initial_unlocking;
};
-
-#define ONENAND_MAX_PARTITIONS 8
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
- defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-
-#else
-
-#define board_onenand_data NULL
-
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-
#endif
--- /dev/null
+/*
+ * OMAP2+ WDTIMER-specific function prototypes
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_OMAP_WD_TIMER_H
+#define __LINUX_PLATFORM_DATA_OMAP_WD_TIMER_H
+
+#include <linux/types.h>
+
+/*
+ * Standardized OMAP reset source bits
+ *
+ * This is a subset of the ones listed in arch/arm/mach-omap2/prm.h
+ * and are the only ones needed in the watchdog driver.
+ */
+#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3
+
+/**
+ * struct omap_wd_timer_platform_data - WDTIMER integration to the host SoC
+ * @read_reset_sources - fn ptr for the SoC to indicate the last reset cause
+ *
+ * The function pointed to by @read_reset_sources must return its data
+ * in a standard format - search for RST_SRC_ID_SHIFT in
+ * arch/arm/mach-omap2
+ */
+struct omap_wd_timer_platform_data {
+ u32 (*read_reset_sources)(void);
+};
+
+#endif
--- /dev/null
+/*
+ * usb-omap.h - Platform data for the various OMAP USB IPs
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define OMAP3_HS_USB_PORTS 3
+
+enum usbhs_omap_port_mode {
+ OMAP_USBHS_PORT_MODE_UNUSED,
+ OMAP_EHCI_PORT_MODE_PHY,
+ OMAP_EHCI_PORT_MODE_TLL,
+ OMAP_EHCI_PORT_MODE_HSIC,
+ OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
+};
+
+struct usbtll_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+};
+
+struct ehci_hcd_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+ int reset_gpio_port[OMAP3_HS_USB_PORTS];
+ struct regulator *regulator[OMAP3_HS_USB_PORTS];
+ unsigned phy_reset:1;
+};
+
+struct ohci_hcd_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+ unsigned es2_compatibility:1;
+};
+
+struct usbhs_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+
+ struct ehci_hcd_omap_platform_data *ehci_data;
+ struct ohci_hcd_omap_platform_data *ohci_data;
+};
+
+/*-------------------------------------------------------------------------*/
+
+struct omap_musb_board_data {
+ u8 interface_type;
+ u8 mode;
+ u16 power;
+ unsigned extvbus:1;
+ void (*set_phy_power)(u8 on);
+ void (*clear_irq)(void);
+ void (*set_mode)(u8 mode);
+ void (*reset)(void);
+};
+
+enum musb_interface {
+ MUSB_INTERFACE_ULPI,
+ MUSB_INTERFACE_UTMI
+};
* clock operations
*
* @adjfreq: Adjusts the frequency of the hardware clock.
- * parameter delta: Desired period change in parts per billion.
+ * parameter delta: Desired frequency offset from nominal frequency
+ * in parts per billion
*
* @adjtime: Shifts the time of the hardware clock.
* parameter delta: Desired change in nanoseconds.
-header-y += md_p.h
-header-y += md_u.h
(for example /usr/src/linux/COPYING); if not, write to the Free
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
#ifndef _MD_U_H
#define _MD_U_H
-/*
- * Different major versions are not compatible.
- * Different minor versions are only downward compatible.
- * Different patchlevel versions are downward and upward compatible.
- */
-#define MD_MAJOR_VERSION 0
-#define MD_MINOR_VERSION 90
-/*
- * MD_PATCHLEVEL_VERSION indicates kernel functionality.
- * >=1 means different superblock formats are selectable using SET_ARRAY_INFO
- * and major_version/minor_version accordingly
- * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT
- * in the super status byte
- * >=3 means that bitmap superblock version 4 is supported, which uses
- * little-ending representation rather than host-endian
- */
-#define MD_PATCHLEVEL_VERSION 3
-
-/* ioctls */
-
-/* status */
-#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t)
-#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t)
-#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t)
-#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13)
-#define RAID_AUTORUN _IO (MD_MAJOR, 0x14)
-#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t)
-
-/* configuration */
-#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20)
-#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t)
-#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22)
-#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t)
-#define SET_DISK_INFO _IO (MD_MAJOR, 0x24)
-#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25)
-#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26)
-#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27)
-#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28)
-#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29)
-#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a)
-#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int)
+#include <uapi/linux/raid/md_u.h>
-/* usage */
-#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t)
-/* 0x31 was START_ARRAY */
-#define STOP_ARRAY _IO (MD_MAJOR, 0x32)
-#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33)
-#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34)
-
-/* 63 partitions with the alternate major number (mdp) */
-#define MdpMinorShift 6
-#ifdef __KERNEL__
extern int mdp_major;
-#endif
-
-typedef struct mdu_version_s {
- int major;
- int minor;
- int patchlevel;
-} mdu_version_t;
-
-typedef struct mdu_array_info_s {
- /*
- * Generic constant information
- */
- int major_version;
- int minor_version;
- int patch_version;
- int ctime;
- int level;
- int size;
- int nr_disks;
- int raid_disks;
- int md_minor;
- int not_persistent;
-
- /*
- * Generic state information
- */
- int utime; /* 0 Superblock update time */
- int state; /* 1 State bits (clean, ...) */
- int active_disks; /* 2 Number of currently active disks */
- int working_disks; /* 3 Number of working disks */
- int failed_disks; /* 4 Number of failed disks */
- int spare_disks; /* 5 Number of spare disks */
-
- /*
- * Personality information
- */
- int layout; /* 0 the array's physical layout */
- int chunk_size; /* 1 chunk size in bytes */
-
-} mdu_array_info_t;
-
-/* non-obvious values for 'level' */
-#define LEVEL_MULTIPATH (-4)
-#define LEVEL_LINEAR (-1)
-#define LEVEL_FAULTY (-5)
-
-/* we need a value for 'no level specified' and 0
- * means 'raid0', so we need something else. This is
- * for internal use only
- */
-#define LEVEL_NONE (-1000000)
-
-typedef struct mdu_disk_info_s {
- /*
- * configuration/status of one particular disk
- */
- int number;
- int major;
- int minor;
- int raid_disk;
- int state;
-
-} mdu_disk_info_t;
-
-typedef struct mdu_start_info_s {
- /*
- * configuration/status of one particular disk
- */
- int major;
- int minor;
- int raid_disk;
- int state;
-
-} mdu_start_info_t;
-
-typedef struct mdu_bitmap_file_s
-{
- char pathname[4096];
-} mdu_bitmap_file_t;
-
-typedef struct mdu_param_s
-{
- int personality; /* 1,2,3,4 */
- int chunk_size; /* in bytes */
- int max_fault; /* unused for now */
-} mdu_param_t;
-
#endif
-
};
struct tty_port {
+ struct tty_bufhead buf; /* Locked internally */
struct tty_struct *tty; /* Back pointer */
+ struct tty_struct *itty; /* internal back ptr */
const struct tty_port_operations *ops; /* Port operations */
spinlock_t lock; /* Lock protecting tty field */
int blocked_open; /* Waiting to open */
wait_queue_head_t close_wait; /* Close waiters */
wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* TTY flags ASY_*/
+ unsigned long iflags; /* TTYP_ internal flags */
+#define TTYP_FLUSHING 1 /* Flushing to ldisc in progress */
+#define TTYP_FLUSHPENDING 2 /* Queued buffer flush pending */
unsigned char console:1; /* port is a console */
struct mutex mutex; /* Locking */
struct mutex buf_mutex; /* Buffer alloc lock */
struct mutex ldisc_mutex;
struct tty_ldisc *ldisc;
+ struct mutex atomic_write_lock;
struct mutex legacy_mutex;
struct mutex termios_mutex;
spinlock_t ctrl_lock;
struct tty_struct *link;
struct fasync_struct *fasync;
- struct tty_bufhead buf; /* Locked internally */
int alt_speed; /* For magic substitution of 38400 bps */
wait_queue_head_t write_wait;
wait_queue_head_t read_wait;
#define N_TTY_BUF_SIZE 4096
- /*
- * The following is data for the N_TTY line discipline. For
- * historical reasons, this is included in the tty structure.
- * Mostly locked by the BKL.
- */
- unsigned int column;
- unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
unsigned char closing:1;
- unsigned char echo_overrun:1;
unsigned short minimum_to_wake;
- unsigned long overrun_time;
- int num_overrun;
- unsigned long process_char_map[256/(8*sizeof(unsigned long))];
- char *read_buf;
- int read_head;
- int read_tail;
- int read_cnt;
- unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))];
- unsigned char *echo_buf;
- unsigned int echo_pos;
- unsigned int echo_cnt;
- int canon_data;
- unsigned long canon_head;
- unsigned int canon_column;
- struct mutex atomic_read_lock;
- struct mutex atomic_write_lock;
- struct mutex output_lock;
- struct mutex echo_lock;
unsigned char *write_buf;
int write_cnt;
- spinlock_t read_lock;
/* If the tty has a pending do_SAK, queue it here - akpm */
struct work_struct SAK_work;
struct tty_port *port;
#define TTY_PTY_LOCK 16 /* pty private */
#define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */
#define TTY_HUPPED 18 /* Post driver->hangup() */
-#define TTY_FLUSHING 19 /* Flushing to ldisc in progress */
-#define TTY_FLUSHPENDING 20 /* Queued buffer flush pending */
#define TTY_HUPPING 21 /* ->hangup() in progress */
#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
extern void no_tty(void);
extern void tty_flip_buffer_push(struct tty_struct *tty);
extern void tty_flush_to_ldisc(struct tty_struct *tty);
-extern void tty_buffer_free_all(struct tty_struct *tty);
+extern void tty_buffer_free_all(struct tty_port *port);
extern void tty_buffer_flush(struct tty_struct *tty);
-extern void tty_buffer_init(struct tty_struct *tty);
+extern void tty_buffer_init(struct tty_port *port);
extern speed_t tty_get_baud_rate(struct tty_struct *tty);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
/* tty_audit.c */
#ifdef CONFIG_AUDIT
extern void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
- size_t size);
+ size_t size, unsigned icanon);
extern void tty_audit_exit(void);
extern void tty_audit_fork(struct signal_struct *sig);
extern void tty_audit_tiocsti(struct tty_struct *tty, char ch);
kuid_t loginuid, u32 sessionid);
#else
static inline void tty_audit_add_data(struct tty_struct *tty,
- unsigned char *data, size_t size)
+ unsigned char *data, size_t size, unsigned icanon)
{
}
static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch)
static inline int tty_insert_flip_char(struct tty_struct *tty,
unsigned char ch, char flag)
{
- struct tty_buffer *tb = tty->buf.tail;
+ struct tty_buffer *tb = tty->port->buf.tail;
if (tb && tb->used < tb->size) {
tb->flag_buf_ptr[tb->used] = flag;
tb->char_buf_ptr[tb->used++] = ch;
*/
unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
+/**
+ * ieee80211_get_mesh_hdrlen - get mesh extension header length
+ * @meshhdr: the mesh extension header, only the flags field
+ * (first byte) will be accessed
+ * Returns the length of the extension header, which is always at
+ * least 6 bytes and at most 18 if address 5 and 6 are present.
+ */
+unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr);
+
/**
* DOC: Data path helpers
*
int shutdown; /* this card is going down */
int free_on_last_close; /* free in context of file_release */
wait_queue_head_t shutdown_sleep;
+ atomic_t refcount; /* refcount for disconnection */
struct device *dev; /* device assigned to this card */
struct device *card_dev; /* cardX object for sysfs */
const struct file_operations *f_ops; /* file operations */
void *private_data; /* private data for f_ops->open */
struct device *dev; /* device for sysfs */
+ struct snd_card *card_ptr; /* assigned card instance */
};
/* return a device pointer linked to each sound device as a parent */
int snd_component_add(struct snd_card *card, const char *component);
int snd_card_file_add(struct snd_card *card, struct file *file);
int snd_card_file_remove(struct snd_card *card, struct file *file);
+void snd_card_unref(struct snd_card *card);
#define snd_card_set_dev(card, devptr) ((card)->dev = (devptr))
DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_pin);
DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_unpin);
+TRACE_EVENT(xen_mmu_flush_tlb_all,
+ TP_PROTO(int x),
+ TP_ARGS(x),
+ TP_STRUCT__entry(__array(char, x, 0)),
+ TP_fast_assign((void)x),
+ TP_printk("%s", "")
+ );
+
TRACE_EVENT(xen_mmu_flush_tlb,
TP_PROTO(int x),
TP_ARGS(x),
#define EPOLL_CTL_ADD 1
#define EPOLL_CTL_DEL 2
#define EPOLL_CTL_MOD 3
-#define EPOLL_CTL_DISABLE 4
/*
* Request the handling of system wakeup events so as to prevent system suspends
# UAPI Header export list
+header-y += md_p.h
+header-y += md_u.h
--- /dev/null
+/*
+ md_u.h : user <=> kernel API between Linux raidtools and RAID drivers
+ Copyright (C) 1998 Ingo Molnar
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ You should have received a copy of the GNU General Public License
+ (for example /usr/src/linux/COPYING); if not, write to the Free
+ Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _UAPI_MD_U_H
+#define _UAPI_MD_U_H
+
+/*
+ * Different major versions are not compatible.
+ * Different minor versions are only downward compatible.
+ * Different patchlevel versions are downward and upward compatible.
+ */
+#define MD_MAJOR_VERSION 0
+#define MD_MINOR_VERSION 90
+/*
+ * MD_PATCHLEVEL_VERSION indicates kernel functionality.
+ * >=1 means different superblock formats are selectable using SET_ARRAY_INFO
+ * and major_version/minor_version accordingly
+ * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT
+ * in the super status byte
+ * >=3 means that bitmap superblock version 4 is supported, which uses
+ * little-ending representation rather than host-endian
+ */
+#define MD_PATCHLEVEL_VERSION 3
+
+/* ioctls */
+
+/* status */
+#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t)
+#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t)
+#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t)
+#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13)
+#define RAID_AUTORUN _IO (MD_MAJOR, 0x14)
+#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t)
+
+/* configuration */
+#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20)
+#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t)
+#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22)
+#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t)
+#define SET_DISK_INFO _IO (MD_MAJOR, 0x24)
+#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25)
+#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26)
+#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27)
+#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28)
+#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29)
+#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a)
+#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int)
+
+/* usage */
+#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t)
+/* 0x31 was START_ARRAY */
+#define STOP_ARRAY _IO (MD_MAJOR, 0x32)
+#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33)
+#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34)
+
+/* 63 partitions with the alternate major number (mdp) */
+#define MdpMinorShift 6
+
+typedef struct mdu_version_s {
+ int major;
+ int minor;
+ int patchlevel;
+} mdu_version_t;
+
+typedef struct mdu_array_info_s {
+ /*
+ * Generic constant information
+ */
+ int major_version;
+ int minor_version;
+ int patch_version;
+ int ctime;
+ int level;
+ int size;
+ int nr_disks;
+ int raid_disks;
+ int md_minor;
+ int not_persistent;
+
+ /*
+ * Generic state information
+ */
+ int utime; /* 0 Superblock update time */
+ int state; /* 1 State bits (clean, ...) */
+ int active_disks; /* 2 Number of currently active disks */
+ int working_disks; /* 3 Number of working disks */
+ int failed_disks; /* 4 Number of failed disks */
+ int spare_disks; /* 5 Number of spare disks */
+
+ /*
+ * Personality information
+ */
+ int layout; /* 0 the array's physical layout */
+ int chunk_size; /* 1 chunk size in bytes */
+
+} mdu_array_info_t;
+
+/* non-obvious values for 'level' */
+#define LEVEL_MULTIPATH (-4)
+#define LEVEL_LINEAR (-1)
+#define LEVEL_FAULTY (-5)
+
+/* we need a value for 'no level specified' and 0
+ * means 'raid0', so we need something else. This is
+ * for internal use only
+ */
+#define LEVEL_NONE (-1000000)
+
+typedef struct mdu_disk_info_s {
+ /*
+ * configuration/status of one particular disk
+ */
+ int number;
+ int major;
+ int minor;
+ int raid_disk;
+ int state;
+
+} mdu_disk_info_t;
+
+typedef struct mdu_start_info_s {
+ /*
+ * configuration/status of one particular disk
+ */
+ int major;
+ int minor;
+ int raid_disk;
+ int state;
+
+} mdu_start_info_t;
+
+typedef struct mdu_bitmap_file_s
+{
+ char pathname[4096];
+} mdu_bitmap_file_t;
+
+typedef struct mdu_param_s
+{
+ int personality; /* 1,2,3,4 */
+ int chunk_size; /* in bytes */
+ int max_fault; /* unused for now */
+} mdu_param_t;
+
+#endif /* _UAPI_MD_U_H */
int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel);
void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel);
+enum omapdss_version {
+ OMAPDSS_VER_UNKNOWN = 0,
+ OMAPDSS_VER_OMAP24xx,
+ OMAPDSS_VER_OMAP34xx_ES1, /* OMAP3430 ES1.0, 2.0 */
+ OMAPDSS_VER_OMAP34xx_ES3, /* OMAP3430 ES3.0+ */
+ OMAPDSS_VER_OMAP3630,
+ OMAPDSS_VER_AM35xx,
+ OMAPDSS_VER_OMAP4430_ES1, /* OMAP4430 ES1.0 */
+ OMAPDSS_VER_OMAP4430_ES2, /* OMAP4430 ES2.0, 2.1, 2.2 */
+ OMAPDSS_VER_OMAP4, /* All other OMAP4s */
+ OMAPDSS_VER_OMAP5,
+};
+
/* Board specific data */
struct omap_dss_board_info {
int (*get_context_loss_count)(struct device *dev);
int (*dsi_enable_pads)(int dsi_id, unsigned lane_mask);
void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask);
int (*set_min_bus_tput)(struct device *dev, unsigned long r);
+ enum omapdss_version version;
};
/* Init with the board info */
};
#ifdef CONFIG_OMAP2_VRFB
+extern bool omap_vrfb_supported(void);
extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
extern void omap_vrfb_restore_context(void);
#else
+static inline bool omap_vrfb_supported(void) { return false; }
static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; }
static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {}
static inline void omap_vrfb_adjust_size(u16 *width, u16 *height,
#include <xen/interface/hvm/params.h>
#include <asm/xen/hypercall.h>
+static const char *param_name(int op)
+{
+#define PARAM(x) [HVM_PARAM_##x] = #x
+ static const char *const names[] = {
+ PARAM(CALLBACK_IRQ),
+ PARAM(STORE_PFN),
+ PARAM(STORE_EVTCHN),
+ PARAM(PAE_ENABLED),
+ PARAM(IOREQ_PFN),
+ PARAM(BUFIOREQ_PFN),
+ PARAM(TIMER_MODE),
+ PARAM(HPET_ENABLED),
+ PARAM(IDENT_PT),
+ PARAM(DM_DOMAIN),
+ PARAM(ACPI_S_STATE),
+ PARAM(VM86_TSS),
+ PARAM(VPT_ALIGN),
+ PARAM(CONSOLE_PFN),
+ PARAM(CONSOLE_EVTCHN),
+ };
+#undef PARAM
+
+ if (op >= ARRAY_SIZE(names))
+ return "unknown";
+
+ if (!names[op])
+ return "reserved";
+
+ return names[op];
+}
static inline int hvm_get_parameter(int idx, uint64_t *value)
{
struct xen_hvm_param xhv;
xhv.index = idx;
r = HYPERVISOR_hvm_op(HVMOP_get_param, &xhv);
if (r < 0) {
- printk(KERN_ERR "Cannot get hvm parameter %d: %d!\n",
- idx, r);
+ printk(KERN_ERR "Cannot get hvm parameter %s (%d): %d!\n",
+ param_name(idx), idx, r);
return r;
}
*value = xhv.value;
{
}
+# if THREAD_SIZE >= PAGE_SIZE
void __init __weak thread_info_cache_init(void)
{
}
+#endif
/*
* Set up kernel memory allocators
src = (void *)info->hdr + symsect->sh_offset;
nsrc = symsect->sh_size / sizeof(*src);
+ /* strtab always starts with a nul, so offset 0 is the empty string. */
+ strtab_size = 1;
+
/* Compute total space required for the core symbols' strtab. */
- for (ndst = i = strtab_size = 1; i < nsrc; ++i, ++src)
- if (is_core_symbol(src, info->sechdrs, info->hdr->e_shnum)) {
- strtab_size += strlen(&info->strtab[src->st_name]) + 1;
+ for (ndst = i = 0; i < nsrc; i++) {
+ if (i == 0 ||
+ is_core_symbol(src+i, info->sechdrs, info->hdr->e_shnum)) {
+ strtab_size += strlen(&info->strtab[src[i].st_name])+1;
ndst++;
}
+ }
/* Append room for core symbols at end of core part. */
info->symoffs = ALIGN(mod->core_size, symsect->sh_addralign ?: 1);
mod->core_symtab = dst = mod->module_core + info->symoffs;
mod->core_strtab = s = mod->module_core + info->stroffs;
src = mod->symtab;
- *dst = *src;
*s++ = 0;
- for (ndst = i = 1; i < mod->num_symtab; ++i, ++src) {
- if (!is_core_symbol(src, info->sechdrs, info->hdr->e_shnum))
- continue;
-
- dst[ndst] = *src;
- dst[ndst++].st_name = s - mod->core_strtab;
- s += strlcpy(s, &mod->strtab[src->st_name], KSYM_NAME_LEN) + 1;
+ for (ndst = i = 0; i < mod->num_symtab; i++) {
+ if (i == 0 ||
+ is_core_symbol(src+i, info->sechdrs, info->hdr->e_shnum)) {
+ dst[ndst] = src[i];
+ dst[ndst++].st_name = s - mod->core_strtab;
+ s += strlcpy(s, &mod->strtab[src[i].st_name],
+ KSYM_NAME_LEN) + 1;
+ }
}
mod->core_num_syms = ndst;
}
struct console *console_drivers;
EXPORT_SYMBOL_GPL(console_drivers);
+#ifdef CONFIG_LOCKDEP
+static struct lockdep_map console_lock_dep_map = {
+ .name = "console_lock"
+};
+#endif
+
/*
* This is used for debugging the mess that is the VT code by
* keeping track if we have the console semaphore held. It's
*/
void console_lock(void)
{
- BUG_ON(in_interrupt());
+ might_sleep();
+
down(&console_sem);
if (console_suspended)
return;
console_locked = 1;
console_may_schedule = 1;
+ mutex_acquire(&console_lock_dep_map, 0, 0, _RET_IP_);
}
EXPORT_SYMBOL(console_lock);
}
console_locked = 1;
console_may_schedule = 0;
+ mutex_acquire(&console_lock_dep_map, 0, 1, _RET_IP_);
return 1;
}
EXPORT_SYMBOL(console_trylock);
local_irq_restore(flags);
}
console_locked = 0;
+ mutex_release(&console_lock_dep_map, 1, _RET_IP_);
/* Release the exclusive_console once it is used */
if (unlikely(exclusive_console))
&balanced_classzone_idx);
}
}
+
+ current->reclaim_state = NULL;
return 0;
}
mutex_unlock(&con->mutex);
return;
} else {
- con->ops->put(con);
dout("con_work %p FAILED to back off %lu\n", con,
con->delay);
+ set_bit(CON_FLAG_BACKOFF, &con->flags);
}
+ goto done;
}
if (con->state == CON_STATE_STANDBY) {
msg = con->ops->alloc_msg(con, hdr, skip);
mutex_lock(&con->mutex);
if (con->state != CON_STATE_OPEN) {
- ceph_msg_put(msg);
+ if (msg)
+ ceph_msg_put(msg);
return -EAGAIN;
}
con->in_msg = msg;
static inline bool skb_loop_sk(struct packet_type *ptype, struct sk_buff *skb)
{
- if (ptype->af_packet_priv == NULL)
+ if (!ptype->af_packet_priv || !skb->sk)
return false;
if (ptype->id_match)
goto skip;
err = nlmsg_populate_fdb_fill(skb, dev, ha->addr,
- portid, seq, 0, NTF_SELF);
+ portid, seq,
+ RTM_NEWNEIGH, NTF_SELF);
if (err < 0)
return err;
skip:
struct inet_diag_req_v2 *r, struct nlattr *bc)
{
const struct inet_diag_handler *handler;
+ int err = 0;
handler = inet_diag_lock_handler(r->sdiag_protocol);
if (!IS_ERR(handler))
handler->dump(skb, cb, r, bc);
+ else
+ err = PTR_ERR(handler);
inet_diag_unlock_handler(handler);
- return skb->len;
+ return err ? : skb->len;
}
static int inet_diag_dump(struct sk_buff *skb, struct netlink_callback *cb)
if ((ct->tuplehash[dir].tuple.src.u3.ip !=
ct->tuplehash[!dir].tuple.dst.u3.ip) ||
- (ct->tuplehash[dir].tuple.src.u.all !=
+ (ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMP &&
+ ct->tuplehash[dir].tuple.src.u.all !=
ct->tuplehash[!dir].tuple.dst.u.all))
if (nf_xfrm_me_harder(skb, AF_INET) < 0)
ret = NF_DROP;
}
#ifdef CONFIG_XFRM
else if (!(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) &&
+ ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMP &&
ct->tuplehash[dir].tuple.dst.u.all !=
ct->tuplehash[!dir].tuple.src.u.all)
if (nf_xfrm_me_harder(skb, AF_INET) < 0)
.tcpv_rttcnt = ca->cnt_rtt,
.tcpv_minrtt = ca->base_rtt,
};
- u64 t = ca->sum_rtt;
- do_div(t, ca->cnt_rtt);
- info.tcpv_rtt = t;
+ if (info.tcpv_rttcnt > 0) {
+ u64 t = ca->sum_rtt;
+ do_div(t, info.tcpv_rttcnt);
+ info.tcpv_rtt = t;
+ }
nla_put(skb, INET_DIAG_VEGASINFO, sizeof(info), &info);
}
}
struct tcphdr *th;
bool fragstolen;
+ if (size == 0)
+ return 0;
+
skb = alloc_skb(size + sizeof(*th), sk->sk_allocation);
if (!skb)
goto err;
}
a = info->attrs[TCP_METRICS_ATTR_ADDR_IPV6];
if (a) {
- if (nla_len(a) != sizeof(sizeof(struct in6_addr)))
+ if (nla_len(a) != sizeof(struct in6_addr))
return -EINVAL;
addr->family = AF_INET6;
memcpy(addr->addr.a6, nla_data(a), sizeof(addr->addr.a6));
/* IFLA_GRE_OKEY */
nla_total_size(4) +
/* IFLA_GRE_LOCAL */
- nla_total_size(4) +
+ nla_total_size(sizeof(struct in6_addr)) +
/* IFLA_GRE_REMOTE */
- nla_total_size(4) +
+ nla_total_size(sizeof(struct in6_addr)) +
/* IFLA_GRE_TTL */
nla_total_size(1) +
/* IFLA_GRE_TOS */
nla_put_be16(skb, IFLA_GRE_OFLAGS, p->o_flags) ||
nla_put_be32(skb, IFLA_GRE_IKEY, p->i_key) ||
nla_put_be32(skb, IFLA_GRE_OKEY, p->o_key) ||
- nla_put(skb, IFLA_GRE_LOCAL, sizeof(struct in6_addr), &p->raddr) ||
- nla_put(skb, IFLA_GRE_REMOTE, sizeof(struct in6_addr), &p->laddr) ||
+ nla_put(skb, IFLA_GRE_LOCAL, sizeof(struct in6_addr), &p->laddr) ||
+ nla_put(skb, IFLA_GRE_REMOTE, sizeof(struct in6_addr), &p->raddr) ||
nla_put_u8(skb, IFLA_GRE_TTL, p->hop_limit) ||
/*nla_put_u8(skb, IFLA_GRE_TOS, t->priority) ||*/
nla_put_u8(skb, IFLA_GRE_ENCAP_LIMIT, p->encap_limit) ||
{
struct inet6_dev *idev;
struct inet6_ifaddr *ifa;
- struct in6_addr mcaddr;
+ struct in6_addr mcaddr = IN6ADDR_LINKLOCAL_ALLNODES_INIT;
idev = in6_dev_get(dev);
if (!idev)
read_lock_bh(&idev->lock);
list_for_each_entry(ifa, &idev->addr_list, if_list) {
- addrconf_addr_solict_mult(&ifa->addr, &mcaddr);
ndisc_send_na(dev, NULL, &mcaddr, &ifa->addr,
/*router=*/ !!idev->cnf.forwarding,
/*solicited=*/ false, /*override=*/ true,
if (!nf_inet_addr_cmp(&ct->tuplehash[dir].tuple.src.u3,
&ct->tuplehash[!dir].tuple.dst.u3) ||
- (ct->tuplehash[dir].tuple.src.u.all !=
+ (ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMPV6 &&
+ ct->tuplehash[dir].tuple.src.u.all !=
ct->tuplehash[!dir].tuple.dst.u.all))
if (nf_xfrm_me_harder(skb, AF_INET6) < 0)
ret = NF_DROP;
}
#ifdef CONFIG_XFRM
else if (!(IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED) &&
+ ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMPV6 &&
ct->tuplehash[dir].tuple.dst.u.all !=
ct->tuplehash[!dir].tuple.src.u.all)
if (nf_xfrm_me_harder(skb, AF_INET6))
{ }
};
-static int __net_init nf_ct_frag6_sysctl_register(struct net *net)
+static int nf_ct_frag6_sysctl_register(struct net *net)
{
struct ctl_table *table;
struct ctl_table_header *hdr;
}
#else
-static int __net_init nf_ct_frag6_sysctl_register(struct net *net)
+static int nf_ct_frag6_sysctl_register(struct net *net)
{
return 0;
}
out_del_dev:
free_netdev(dev);
+ spriv->dev = NULL;
out_del_session:
l2tp_session_delete(session);
out:
sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH;
sdata->u.ibss.ibss_join_req = jiffies;
- memcpy(sdata->u.ibss.ssid, params->ssid, IEEE80211_MAX_SSID_LEN);
+ memcpy(sdata->u.ibss.ssid, params->ssid, params->ssid_len);
sdata->u.ibss.ssid_len = params->ssid_len;
mutex_unlock(&sdata->u.ibss.mtx);
if (ieee80211_is_action(hdr->frame_control)) {
u8 category;
+
+ /* make sure category field is present */
+ if (rx->skb->len < IEEE80211_MIN_ACTION_SIZE)
+ return RX_DROP_MONITOR;
+
mgmt = (struct ieee80211_mgmt *)hdr;
category = mgmt->u.action.category;
if (category != WLAN_CATEGORY_MESH_ACTION &&
*/
if (rx->sta && rx->sdata->vif.type == NL80211_IFTYPE_STATION &&
ieee80211_is_data_present(hdr->frame_control)) {
- u16 ethertype;
- u8 *payload;
-
- payload = rx->skb->data +
- ieee80211_hdrlen(hdr->frame_control);
- ethertype = (payload[6] << 8) | payload[7];
- if (cpu_to_be16(ethertype) ==
- rx->sdata->control_port_protocol)
+ unsigned int hdrlen;
+ __be16 ethertype;
+
+ hdrlen = ieee80211_hdrlen(hdr->frame_control);
+
+ if (rx->skb->len < hdrlen + 8)
+ return RX_DROP_MONITOR;
+
+ skb_copy_bits(rx->skb, hdrlen + 6, ðertype, 2);
+ if (ethertype == rx->sdata->control_port_protocol)
return RX_CONTINUE;
}
hdr = (struct ieee80211_hdr *)rx->skb->data;
fc = hdr->frame_control;
+
+ if (ieee80211_is_ctl(fc))
+ return RX_CONTINUE;
+
sc = le16_to_cpu(hdr->seq_ctrl);
frag = sc & IEEE80211_SCTL_FRAG;
if (likely((!ieee80211_has_morefrags(fc) && frag == 0) ||
- (rx->skb)->len < 24 ||
is_multicast_ether_addr(hdr->addr1))) {
/* not fragmented */
goto out;
hdr = (struct ieee80211_hdr *) skb->data;
hdrlen = ieee80211_hdrlen(hdr->frame_control);
+
+ /* make sure fixed part of mesh header is there, also checks skb len */
+ if (!pskb_may_pull(rx->skb, hdrlen + 6))
+ return RX_DROP_MONITOR;
+
+ mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
+
+ /* make sure full mesh header is there, also checks skb len */
+ if (!pskb_may_pull(rx->skb,
+ hdrlen + ieee80211_get_mesh_hdrlen(mesh_hdr)))
+ return RX_DROP_MONITOR;
+
+ /* reload pointers */
+ hdr = (struct ieee80211_hdr *) skb->data;
mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
/* frame is in RMC, don't forward */
mesh_rmc_check(hdr->addr3, mesh_hdr, rx->sdata))
return RX_DROP_MONITOR;
- if (!ieee80211_is_data(hdr->frame_control))
+ if (!ieee80211_is_data(hdr->frame_control) ||
+ !(status->rx_flags & IEEE80211_RX_RA_MATCH))
return RX_CONTINUE;
if (!mesh_hdr->ttl)
if (is_multicast_ether_addr(hdr->addr1)) {
mpp_addr = hdr->addr3;
proxied_addr = mesh_hdr->eaddr1;
- } else {
+ } else if (mesh_hdr->flags & MESH_FLAGS_AE_A5_A6) {
+ /* has_a4 already checked in ieee80211_rx_mesh_check */
mpp_addr = hdr->addr4;
proxied_addr = mesh_hdr->eaddr2;
+ } else {
+ return RX_DROP_MONITOR;
}
rcu_read_lock();
}
skb_set_queue_mapping(skb, q);
- if (!(status->rx_flags & IEEE80211_RX_RA_MATCH))
- goto out;
-
if (!--mesh_hdr->ttl) {
IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl);
- return RX_DROP_MONITOR;
+ goto out;
}
if (!ifmsh->mshcfg.dot11MeshForwarding)
}
break;
case WLAN_CATEGORY_SELF_PROTECTED:
+ if (len < (IEEE80211_MIN_ACTION_SIZE +
+ sizeof(mgmt->u.action.u.self_prot.action_code)))
+ break;
+
switch (mgmt->u.action.u.self_prot.action_code) {
case WLAN_SP_MESH_PEERING_OPEN:
case WLAN_SP_MESH_PEERING_CLOSE:
}
break;
case WLAN_CATEGORY_MESH_ACTION:
+ if (len < (IEEE80211_MIN_ACTION_SIZE +
+ sizeof(mgmt->u.action.u.mesh_action.action_code)))
+ break;
+
if (!ieee80211_vif_is_mesh(&sdata->vif))
break;
if (mesh_action_is_path_sel(mgmt) &&
if (ieee80211_is_data(fc) || ieee80211_is_mgmt(fc))
local->dot11ReceivedFragmentCount++;
- if (ieee80211_is_mgmt(fc))
- err = skb_linearize(skb);
- else
+ if (ieee80211_is_mgmt(fc)) {
+ /* drop frame if too short for header */
+ if (skb->len < ieee80211_hdrlen(fc))
+ err = -ENOBUFS;
+ else
+ err = skb_linearize(skb);
+ } else {
err = !pskb_may_pull(skb, ieee80211_hdrlen(fc));
+ }
if (err) {
dev_kfree_skb(skb);
break;
}
- if (id != WLAN_EID_VENDOR_SPECIFIC &&
- id != WLAN_EID_QUIET &&
- test_bit(id, seen_elems)) {
- elems->parse_error = true;
- left -= elen;
- pos += elen;
- continue;
+ switch (id) {
+ case WLAN_EID_SSID:
+ case WLAN_EID_SUPP_RATES:
+ case WLAN_EID_FH_PARAMS:
+ case WLAN_EID_DS_PARAMS:
+ case WLAN_EID_CF_PARAMS:
+ case WLAN_EID_TIM:
+ case WLAN_EID_IBSS_PARAMS:
+ case WLAN_EID_CHALLENGE:
+ case WLAN_EID_RSN:
+ case WLAN_EID_ERP_INFO:
+ case WLAN_EID_EXT_SUPP_RATES:
+ case WLAN_EID_HT_CAPABILITY:
+ case WLAN_EID_HT_OPERATION:
+ case WLAN_EID_VHT_CAPABILITY:
+ case WLAN_EID_VHT_OPERATION:
+ case WLAN_EID_MESH_ID:
+ case WLAN_EID_MESH_CONFIG:
+ case WLAN_EID_PEER_MGMT:
+ case WLAN_EID_PREQ:
+ case WLAN_EID_PREP:
+ case WLAN_EID_PERR:
+ case WLAN_EID_RANN:
+ case WLAN_EID_CHANNEL_SWITCH:
+ case WLAN_EID_EXT_CHANSWITCH_ANN:
+ case WLAN_EID_COUNTRY:
+ case WLAN_EID_PWR_CONSTRAINT:
+ case WLAN_EID_TIMEOUT_INTERVAL:
+ if (test_bit(id, seen_elems)) {
+ elems->parse_error = true;
+ left -= elen;
+ pos += elen;
+ continue;
+ }
+ break;
}
if (calc_crc && id < 64 && (filter & (1ULL << id)))
flowi4_to_flowi(&fl1), false)) {
if (!afinfo->route(&init_net, (struct dst_entry **)&rt2,
flowi4_to_flowi(&fl2), false)) {
- if (rt1->rt_gateway == rt2->rt_gateway &&
+ if (rt_nexthop(rt1, fl1.daddr) ==
+ rt_nexthop(rt2, fl2.daddr) &&
rt1->dst.dev == rt2->dst.dev)
ret = 1;
dst_release(&rt2->dst);
* grp->index is the index of the group; and grp->slot_shift
* is the shift for the corresponding (scaled) sigma_i.
*/
-#define QFQ_MAX_INDEX 19
-#define QFQ_MAX_WSHIFT 16
+#define QFQ_MAX_INDEX 24
+#define QFQ_MAX_WSHIFT 12
#define QFQ_MAX_WEIGHT (1<<QFQ_MAX_WSHIFT)
-#define QFQ_MAX_WSUM (2*QFQ_MAX_WEIGHT)
+#define QFQ_MAX_WSUM (16*QFQ_MAX_WEIGHT)
#define FRAC_BITS 30 /* fixed point arithmetic */
#define ONE_FP (1UL << FRAC_BITS)
#define IWSUM (ONE_FP/QFQ_MAX_WSUM)
-#define QFQ_MTU_SHIFT 11
+#define QFQ_MTU_SHIFT 16 /* to support TSO/GSO */
#define QFQ_MIN_SLOT_SHIFT (FRAC_BITS + QFQ_MTU_SHIFT - QFQ_MAX_INDEX)
+#define QFQ_MIN_LMAX 256 /* min possible lmax for a class */
/*
* Possible group states. These values are used as indexes for the bitmaps
q->wsum += delta_w;
}
+static void qfq_update_reactivate_class(struct qfq_sched *q,
+ struct qfq_class *cl,
+ u32 inv_w, u32 lmax, int delta_w)
+{
+ bool need_reactivation = false;
+ int i = qfq_calc_index(inv_w, lmax);
+
+ if (&q->groups[i] != cl->grp && cl->qdisc->q.qlen > 0) {
+ /*
+ * shift cl->F back, to not charge the
+ * class for the not-yet-served head
+ * packet
+ */
+ cl->F = cl->S;
+ /* remove class from its slot in the old group */
+ qfq_deactivate_class(q, cl);
+ need_reactivation = true;
+ }
+
+ qfq_update_class_params(q, cl, lmax, inv_w, delta_w);
+
+ if (need_reactivation) /* activate in new group */
+ qfq_activate_class(q, cl, qdisc_peek_len(cl->qdisc));
+}
+
+
static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
struct nlattr **tca, unsigned long *arg)
{
struct qfq_class *cl = (struct qfq_class *)*arg;
struct nlattr *tb[TCA_QFQ_MAX + 1];
u32 weight, lmax, inv_w;
- int i, err;
+ int err;
int delta_w;
if (tca[TCA_OPTIONS] == NULL) {
if (tb[TCA_QFQ_LMAX]) {
lmax = nla_get_u32(tb[TCA_QFQ_LMAX]);
- if (!lmax || lmax > (1UL << QFQ_MTU_SHIFT)) {
+ if (lmax < QFQ_MIN_LMAX || lmax > (1UL << QFQ_MTU_SHIFT)) {
pr_notice("qfq: invalid max length %u\n", lmax);
return -EINVAL;
}
} else
- lmax = 1UL << QFQ_MTU_SHIFT;
+ lmax = psched_mtu(qdisc_dev(sch));
if (cl != NULL) {
- bool need_reactivation = false;
-
if (tca[TCA_RATE]) {
err = gen_replace_estimator(&cl->bstats, &cl->rate_est,
qdisc_root_sleeping_lock(sch),
if (lmax == cl->lmax && inv_w == cl->inv_w)
return 0; /* nothing to update */
- i = qfq_calc_index(inv_w, lmax);
sch_tree_lock(sch);
- if (&q->groups[i] != cl->grp && cl->qdisc->q.qlen > 0) {
- /*
- * shift cl->F back, to not charge the
- * class for the not-yet-served head
- * packet
- */
- cl->F = cl->S;
- /* remove class from its slot in the old group */
- qfq_deactivate_class(q, cl);
- need_reactivation = true;
- }
-
- qfq_update_class_params(q, cl, lmax, inv_w, delta_w);
-
- if (need_reactivation) /* activate in new group */
- qfq_activate_class(q, cl, qdisc_peek_len(cl->qdisc));
+ qfq_update_reactivate_class(q, cl, inv_w, lmax, delta_w);
sch_tree_unlock(sch);
return 0;
/*
- * XXX we should make sure that slot becomes less than 32.
- * This is guaranteed by the input values.
- * roundedS is always cl->S rounded on grp->slot_shift bits.
+ * If the weight and lmax (max_pkt_size) of the classes do not change,
+ * then QFQ guarantees that the slot index is never higher than
+ * 2 + ((1<<QFQ_MTU_SHIFT)/QFQ_MIN_LMAX) * (QFQ_MAX_WEIGHT/QFQ_MAX_WSUM).
+ *
+ * With the current values of the above constants, the index is
+ * then guaranteed to never be higher than 2 + 256 * (1 / 16) = 18.
+ *
+ * When the weight of a class is increased or the lmax of the class is
+ * decreased, a new class with smaller slot size may happen to be
+ * activated. The activation of this class should be properly delayed
+ * to when the service of the class has finished in the ideal system
+ * tracked by QFQ. If the activation of the class is not delayed to
+ * this reference time instant, then this class may be unjustly served
+ * before other classes waiting for service. This may cause
+ * (unfrequently) the above bound to the slot index to be violated for
+ * some of these unlucky classes.
+ *
+ * Instead of delaying the activation of the new class, which is quite
+ * complex, the following inaccurate but simple solution is used: if
+ * the slot index is higher than QFQ_MAX_SLOTS-2, then the timestamps
+ * of the class are shifted backward so as to let the slot index
+ * become equal to QFQ_MAX_SLOTS-2. This threshold is used because, if
+ * the slot index is above it, then the data structure implementing
+ * the bucket list either gets immediately corrupted or may get
+ * corrupted on a possible next packet arrival that causes the start
+ * time of the group to be shifted backward.
*/
static void qfq_slot_insert(struct qfq_group *grp, struct qfq_class *cl,
u64 roundedS)
{
u64 slot = (roundedS - grp->S) >> grp->slot_shift;
- unsigned int i = (grp->front + slot) % QFQ_MAX_SLOTS;
+ unsigned int i; /* slot index in the bucket list */
+
+ if (unlikely(slot > QFQ_MAX_SLOTS - 2)) {
+ u64 deltaS = roundedS - grp->S -
+ ((u64)(QFQ_MAX_SLOTS - 2)<<grp->slot_shift);
+ cl->S -= deltaS;
+ cl->F -= deltaS;
+ slot = QFQ_MAX_SLOTS - 2;
+ }
+
+ i = (grp->front + slot) % QFQ_MAX_SLOTS;
hlist_add_head(&cl->next, &grp->slots[i]);
__set_bit(slot, &grp->full_slots);
}
pr_debug("qfq_enqueue: cl = %x\n", cl->common.classid);
+ if (unlikely(cl->lmax < qdisc_pkt_len(skb))) {
+ pr_debug("qfq: increasing maxpkt from %u to %u for class %u",
+ cl->lmax, qdisc_pkt_len(skb), cl->common.classid);
+ qfq_update_reactivate_class(q, cl, cl->inv_w,
+ qdisc_pkt_len(skb), 0);
+ }
+
err = qdisc_enqueue(skb, cl->qdisc);
if (unlikely(err != NET_XMIT_SUCCESS)) {
pr_debug("qfq_enqueue: enqueue failed %d\n", err);
void *addr_buf;
struct sctp_af *af;
- SCTP_DEBUG_PRINTK("sctp_setsocktopt_bindx: sk %p addrs %p"
+ SCTP_DEBUG_PRINTK("sctp_setsockopt_bindx: sk %p addrs %p"
" addrs_size %d opt %d\n", sk, addrs, addrs_size, op);
if (unlikely(addrs_size <= 0))
xprt_free_allocation(req);
dprintk("RPC: setup backchannel transport failed\n");
- return -1;
+ return -ENOMEM;
}
EXPORT_SYMBOL_GPL(xprt_setup_backchannel);
return;
handler_enabled = 0;
- tasklet_disable(&tipc_tasklet);
tasklet_kill(&tipc_tasklet);
spin_lock_bh(&qitem_lock);
for (i = 0; i < sband->n_channels; i++) {
sband->channels[i].orig_flags =
sband->channels[i].flags;
- sband->channels[i].orig_mag =
- sband->channels[i].max_antenna_gain;
+ sband->channels[i].orig_mag = INT_MAX;
sband->channels[i].orig_mpwr =
sband->channels[i].max_power;
sband->channels[i].band = band;
map_regdom_flags(reg_rule->flags) | bw_flags;
chan->max_antenna_gain = chan->orig_mag =
(int) MBI_TO_DBI(power_rule->max_antenna_gain);
- chan->max_power = chan->orig_mpwr =
+ chan->max_reg_power = chan->max_power = chan->orig_mpwr =
(int) MBM_TO_DBM(power_rule->max_eirp);
return;
}
chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags;
chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain);
- chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
+ chan->max_reg_power = chan->max_power =
+ (int) MBM_TO_DBM(power_rule->max_eirp);
}
static void handle_band_custom(struct wiphy *wiphy, enum ieee80211_band band,
}
EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb);
-static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
+unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
{
int ae = meshhdr->flags & MESH_FLAGS_AE;
- /* 7.1.3.5a.2 */
+ /* 802.11-2012, 8.2.4.7.3 */
switch (ae) {
+ default:
case 0:
return 6;
case MESH_FLAGS_AE_A4:
return 12;
case MESH_FLAGS_AE_A5_A6:
return 18;
- case (MESH_FLAGS_AE_A4 | MESH_FLAGS_AE_A5_A6):
- return 24;
- default:
- return 6;
}
}
+EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen);
int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
enum nl80211_iftype iftype)
/* make sure meshdr->flags is on the linear part */
if (!pskb_may_pull(skb, hdrlen + 1))
return -1;
+ if (meshdr->flags & MESH_FLAGS_AE_A4)
+ return -1;
if (meshdr->flags & MESH_FLAGS_AE_A5_A6) {
skb_copy_bits(skb, hdrlen +
offsetof(struct ieee80211s_hdr, eaddr1),
/* make sure meshdr->flags is on the linear part */
if (!pskb_may_pull(skb, hdrlen + 1))
return -1;
+ if (meshdr->flags & MESH_FLAGS_AE_A5_A6)
+ return -1;
if (meshdr->flags & MESH_FLAGS_AE_A4)
skb_copy_bits(skb, hdrlen +
offsetof(struct ieee80211s_hdr, eaddr1),
__modinst: $(modules)
@:
+# Don't stop modules_install if we can't sign external modules.
quiet_cmd_modules_install = INSTALL $@
- cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@) ; $(mod_sign_cmd) $(2)/$(notdir $@)
+ cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@) ; $(mod_sign_cmd) $(2)/$(notdir $@) $(patsubst %,|| true,$(KBUILD_EXTMOD))
# Modules built outside the kernel source tree go into extra by default
INSTALL_MOD_DIR ?= extra
}
if ($realfile =~ m@^(drivers/net/|net/)@ &&
- $rawline !~ m@^\+[ \t]*(\/\*|\*\/)@ &&
- $rawline =~ m@^\+[ \t]*.+\*\/[ \t]*$@) {
+ $rawline !~ m@^\+[ \t]*\*/[ \t]*$@ && #trailing */
+ $rawline !~ m@^\+.*/\*.*\*/[ \t]*$@ && #inline /*...*/
+ $rawline !~ m@^\+.*\*{2,}/[ \t]*$@ && #trailing **/
+ $rawline =~ m@^\+[ \t]*.+\*\/[ \t]*$@) { #non blank */
WARN("NETWORKING_BLOCK_COMMENT_STYLE",
"networking block comments put the trailing */ on a separate line\n" . $herecurr);
}
if (dirn != compr->direction) {
pr_err("this device doesn't support this direction\n");
+ snd_card_unref(compr->card);
return -EINVAL;
}
data = kzalloc(sizeof(*data), GFP_KERNEL);
- if (!data)
+ if (!data) {
+ snd_card_unref(compr->card);
return -ENOMEM;
+ }
data->stream.ops = compr->ops;
data->stream.direction = dirn;
data->stream.private_data = compr->private_data;
runtime = kzalloc(sizeof(*runtime), GFP_KERNEL);
if (!runtime) {
kfree(data);
+ snd_card_unref(compr->card);
return -ENOMEM;
}
runtime->state = SNDRV_PCM_STATE_OPEN;
kfree(runtime);
kfree(data);
}
- return ret;
+ snd_card_unref(compr->card);
+ return 0;
}
static int snd_compr_free(struct inode *inode, struct file *f)
write_lock_irqsave(&card->ctl_files_rwlock, flags);
list_add_tail(&ctl->list, &card->ctl_files);
write_unlock_irqrestore(&card->ctl_files_rwlock, flags);
+ snd_card_unref(card);
return 0;
__error:
__error2:
snd_card_file_remove(card, file);
__error1:
+ if (card)
+ snd_card_unref(card);
return err;
}
spin_unlock_irq(&ctl->read_lock);
schedule();
remove_wait_queue(&ctl->change_sleep, &wait);
+ if (ctl->card->shutdown)
+ return -ENODEV;
if (signal_pending(current))
return -ERESTARTSYS;
spin_lock_irq(&ctl->read_lock);
if (hw == NULL)
return -ENODEV;
- if (!try_module_get(hw->card->module))
+ if (!try_module_get(hw->card->module)) {
+ snd_card_unref(hw->card);
return -EFAULT;
+ }
init_waitqueue_entry(&wait, current);
add_wait_queue(&hw->open_wait, &wait);
mutex_unlock(&hw->open_mutex);
schedule();
mutex_lock(&hw->open_mutex);
+ if (hw->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
mutex_unlock(&hw->open_mutex);
if (err < 0)
module_put(hw->card->module);
+ snd_card_unref(hw->card);
return err;
}
mutex_unlock(®ister_mutex);
return -EINVAL;
}
+ mutex_lock(&hwdep->open_mutex);
+ wake_up(&hwdep->open_wait);
#ifdef CONFIG_SND_OSSEMUL
if (hwdep->ossreg)
snd_unregister_oss_device(hwdep->oss_type, hwdep->card, hwdep->device);
#endif
snd_unregister_device(SNDRV_DEVICE_TYPE_HWDEP, hwdep->card, hwdep->device);
list_del_init(&hwdep->list);
+ mutex_unlock(&hwdep->open_mutex);
mutex_unlock(®ister_mutex);
return 0;
}
spin_lock_init(&card->files_lock);
INIT_LIST_HEAD(&card->files_list);
init_waitqueue_head(&card->shutdown_sleep);
+ atomic_set(&card->refcount, 0);
#ifdef CONFIG_PM
mutex_init(&card->power_lock);
init_waitqueue_head(&card->power_sleep);
return 0;
}
+/**
+ * snd_card_unref - release the reference counter
+ * @card: the card instance
+ *
+ * Decrements the reference counter. When it reaches to zero, wake up
+ * the sleeper and call the destructor if needed.
+ */
+void snd_card_unref(struct snd_card *card)
+{
+ if (atomic_dec_and_test(&card->refcount)) {
+ wake_up(&card->shutdown_sleep);
+ if (card->free_on_last_close)
+ snd_card_do_free(card);
+ }
+}
+EXPORT_SYMBOL(snd_card_unref);
+
int snd_card_free_when_closed(struct snd_card *card)
{
- int free_now = 0;
- int ret = snd_card_disconnect(card);
- if (ret)
- return ret;
+ int ret;
- spin_lock(&card->files_lock);
- if (list_empty(&card->files_list))
- free_now = 1;
- else
- card->free_on_last_close = 1;
- spin_unlock(&card->files_lock);
+ atomic_inc(&card->refcount);
+ ret = snd_card_disconnect(card);
+ if (ret) {
+ atomic_dec(&card->refcount);
+ return ret;
+ }
- if (free_now)
+ card->free_on_last_close = 1;
+ if (atomic_dec_and_test(&card->refcount))
snd_card_do_free(card);
return 0;
}
return ret;
/* wait, until all devices are ready for the free operation */
- wait_event(card->shutdown_sleep, list_empty(&card->files_list));
+ wait_event(card->shutdown_sleep, !atomic_read(&card->refcount));
snd_card_do_free(card);
return 0;
}
return -ENODEV;
}
list_add(&mfile->list, &card->files_list);
+ atomic_inc(&card->refcount);
spin_unlock(&card->files_lock);
return 0;
}
int snd_card_file_remove(struct snd_card *card, struct file *file)
{
struct snd_monitor_file *mfile, *found = NULL;
- int last_close = 0;
spin_lock(&card->files_lock);
list_for_each_entry(mfile, &card->files_list, list) {
break;
}
}
- if (list_empty(&card->files_list))
- last_close = 1;
spin_unlock(&card->files_lock);
- if (last_close) {
- wake_up(&card->shutdown_sleep);
- if (card->free_on_last_close)
- snd_card_do_free(card);
- }
if (!found) {
snd_printk(KERN_ERR "ALSA card file remove problem (%p)\n", file);
return -ENOENT;
}
kfree(found);
+ snd_card_unref(card);
return 0;
}
SNDRV_OSS_DEVICE_TYPE_MIXER);
if (card == NULL)
return -ENODEV;
- if (card->mixer_oss == NULL)
+ if (card->mixer_oss == NULL) {
+ snd_card_unref(card);
return -ENODEV;
+ }
err = snd_card_file_add(card, file);
- if (err < 0)
+ if (err < 0) {
+ snd_card_unref(card);
return err;
+ }
fmixer = kzalloc(sizeof(*fmixer), GFP_KERNEL);
if (fmixer == NULL) {
snd_card_file_remove(card, file);
+ snd_card_unref(card);
return -ENOMEM;
}
fmixer->card = card;
if (!try_module_get(card->module)) {
kfree(fmixer);
snd_card_file_remove(card, file);
+ snd_card_unref(card);
return -EFAULT;
}
+ snd_card_unref(card);
return 0;
}
mutex_unlock(&pcm->open_mutex);
schedule();
mutex_lock(&pcm->open_mutex);
+ if (pcm->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
mutex_unlock(&pcm->open_mutex);
if (err < 0)
goto __error;
+ snd_card_unref(pcm->card);
return err;
__error:
__error2:
snd_card_file_remove(pcm->card, file);
__error1:
+ if (pcm)
+ snd_card_unref(pcm->card);
return err;
}
if (list_empty(&pcm->list))
goto unlock;
+ mutex_lock(&pcm->open_mutex);
+ wake_up(&pcm->open_wait);
list_del_init(&pcm->list);
for (cidx = 0; cidx < 2; cidx++)
- for (substream = pcm->streams[cidx].substream; substream; substream = substream->next)
- if (substream->runtime)
+ for (substream = pcm->streams[cidx].substream; substream; substream = substream->next) {
+ snd_pcm_stream_lock_irq(substream);
+ if (substream->runtime) {
substream->runtime->status->state = SNDRV_PCM_STATE_DISCONNECTED;
+ wake_up(&substream->runtime->sleep);
+ wake_up(&substream->runtime->tsleep);
+ }
+ snd_pcm_stream_unlock_irq(substream);
+ }
list_for_each_entry(notify, &snd_pcm_notify_list, list) {
notify->n_disconnect(pcm);
}
pcm->streams[cidx].chmap_kctl = NULL;
}
}
+ mutex_unlock(&pcm->open_mutex);
unlock:
mutex_unlock(®ister_mutex);
return 0;
return usecs;
}
+static void snd_pcm_set_state(struct snd_pcm_substream *substream, int state)
+{
+ snd_pcm_stream_lock_irq(substream);
+ if (substream->runtime->status->state != SNDRV_PCM_STATE_DISCONNECTED)
+ substream->runtime->status->state = state;
+ snd_pcm_stream_unlock_irq(substream);
+}
+
static int snd_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
runtime->boundary *= 2;
snd_pcm_timer_resolution_change(substream);
- runtime->status->state = SNDRV_PCM_STATE_SETUP;
+ snd_pcm_set_state(substream, SNDRV_PCM_STATE_SETUP);
if (pm_qos_request_active(&substream->latency_pm_qos_req))
pm_qos_remove_request(&substream->latency_pm_qos_req);
/* hardware might be unusable from this time,
so we force application to retry to set
the correct hardware parameter settings */
- runtime->status->state = SNDRV_PCM_STATE_OPEN;
+ snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN);
if (substream->ops->hw_free != NULL)
substream->ops->hw_free(substream);
return err;
return -EBADFD;
if (substream->ops->hw_free)
result = substream->ops->hw_free(substream);
- runtime->status->state = SNDRV_PCM_STATE_OPEN;
+ snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN);
pm_qos_remove_request(&substream->latency_pm_qos_req);
return result;
}
{
struct snd_pcm_runtime *runtime = substream->runtime;
runtime->control->appl_ptr = runtime->status->hw_ptr;
- runtime->status->state = SNDRV_PCM_STATE_PREPARED;
+ snd_pcm_set_state(substream, SNDRV_PCM_STATE_PREPARED);
}
static struct action_ops snd_pcm_action_prepare = {
down_read(&snd_pcm_link_rwsem);
snd_pcm_stream_lock_irq(substream);
remove_wait_queue(&to_check->sleep, &wait);
+ if (card->shutdown) {
+ result = -ENODEV;
+ break;
+ }
if (tout == 0) {
if (substream->runtime->status->state == SNDRV_PCM_STATE_SUSPENDED)
result = -ESTRPIPE;
write_unlock_irq(&snd_pcm_link_rwlock);
up_write(&snd_pcm_link_rwsem);
_nolock:
+ snd_card_unref(substream1->pcm->card);
fput_light(file, fput_needed);
if (res < 0)
kfree(group);
return err;
pcm = snd_lookup_minor_data(iminor(inode),
SNDRV_DEVICE_TYPE_PCM_PLAYBACK);
- return snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_PLAYBACK);
+ err = snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_PLAYBACK);
+ if (pcm)
+ snd_card_unref(pcm->card);
+ return err;
}
static int snd_pcm_capture_open(struct inode *inode, struct file *file)
return err;
pcm = snd_lookup_minor_data(iminor(inode),
SNDRV_DEVICE_TYPE_PCM_CAPTURE);
- return snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_CAPTURE);
+ err = snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_CAPTURE);
+ if (pcm)
+ snd_card_unref(pcm->card);
+ return err;
}
static int snd_pcm_open(struct file *file, struct snd_pcm *pcm, int stream)
mutex_unlock(&pcm->open_mutex);
schedule();
mutex_lock(&pcm->open_mutex);
+ if (pcm->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
if (rmidi == NULL)
return -ENODEV;
- if (!try_module_get(rmidi->card->module))
+ if (!try_module_get(rmidi->card->module)) {
+ snd_card_unref(rmidi->card);
return -ENXIO;
+ }
mutex_lock(&rmidi->open_mutex);
card = rmidi->card;
mutex_unlock(&rmidi->open_mutex);
schedule();
mutex_lock(&rmidi->open_mutex);
+ if (rmidi->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
#endif
file->private_data = rawmidi_file;
mutex_unlock(&rmidi->open_mutex);
+ snd_card_unref(rmidi->card);
return 0;
__error:
__error_card:
mutex_unlock(&rmidi->open_mutex);
module_put(rmidi->card->module);
+ snd_card_unref(rmidi->card);
return err;
}
spin_unlock_irq(&runtime->lock);
schedule();
remove_wait_queue(&runtime->sleep, &wait);
+ if (rfile->rmidi->card->shutdown)
+ return -ENODEV;
if (signal_pending(current))
return result > 0 ? result : -ERESTARTSYS;
if (!runtime->avail)
spin_unlock_irq(&runtime->lock);
timeout = schedule_timeout(30 * HZ);
remove_wait_queue(&runtime->sleep, &wait);
+ if (rfile->rmidi->card->shutdown)
+ return -ENODEV;
if (signal_pending(current))
return result > 0 ? result : -ERESTARTSYS;
if (!runtime->avail && !timeout)
static int snd_rawmidi_dev_disconnect(struct snd_device *device)
{
struct snd_rawmidi *rmidi = device->device_data;
+ int dir;
mutex_lock(®ister_mutex);
+ mutex_lock(&rmidi->open_mutex);
+ wake_up(&rmidi->open_wait);
list_del_init(&rmidi->list);
+ for (dir = 0; dir < 2; dir++) {
+ struct snd_rawmidi_substream *s;
+ list_for_each_entry(s, &rmidi->streams[dir].substreams, list) {
+ if (s->runtime)
+ wake_up(&s->runtime->sleep);
+ }
+ }
+
#ifdef CONFIG_SND_OSSEMUL
if (rmidi->ossreg) {
if ((int)rmidi->device == midi_map[rmidi->card->number]) {
}
#endif /* CONFIG_SND_OSSEMUL */
snd_unregister_device(SNDRV_DEVICE_TYPE_RAWMIDI, rmidi->card, rmidi->device);
+ mutex_unlock(&rmidi->open_mutex);
mutex_unlock(®ister_mutex);
return 0;
}
*
* Checks that a minor device with the specified type is registered, and returns
* its user data pointer.
+ *
+ * This function increments the reference counter of the card instance
+ * if an associated instance with the given minor number and type is found.
+ * The caller must call snd_card_unref() appropriately later.
*/
void *snd_lookup_minor_data(unsigned int minor, int type)
{
return NULL;
mutex_lock(&sound_mutex);
mreg = snd_minors[minor];
- if (mreg && mreg->type == type)
+ if (mreg && mreg->type == type) {
private_data = mreg->private_data;
- else
+ if (private_data && mreg->card_ptr)
+ atomic_inc(&mreg->card_ptr->refcount);
+ } else
private_data = NULL;
mutex_unlock(&sound_mutex);
return private_data;
preg->device = dev;
preg->f_ops = f_ops;
preg->private_data = private_data;
+ preg->card_ptr = card;
mutex_lock(&sound_mutex);
#ifdef CONFIG_SND_DYNAMIC_MINORS
minor = snd_find_free_minor(type);
static struct snd_minor *snd_oss_minors[SNDRV_OSS_MINORS];
static DEFINE_MUTEX(sound_oss_mutex);
+/* NOTE: This function increments the refcount of the associated card like
+ * snd_lookup_minor_data(); the caller must call snd_card_unref() appropriately
+ */
void *snd_lookup_oss_minor_data(unsigned int minor, int type)
{
struct snd_minor *mreg;
return NULL;
mutex_lock(&sound_oss_mutex);
mreg = snd_oss_minors[minor];
- if (mreg && mreg->type == type)
+ if (mreg && mreg->type == type) {
private_data = mreg->private_data;
- else
+ if (private_data && mreg->card_ptr)
+ atomic_inc(&mreg->card_ptr->refcount);
+ } else
private_data = NULL;
mutex_unlock(&sound_oss_mutex);
return private_data;
preg->device = dev;
preg->f_ops = f_ops;
preg->private_data = private_data;
+ preg->card_ptr = card;
mutex_lock(&sound_oss_mutex);
snd_oss_minors[minor] = preg;
minor_unit = SNDRV_MINOR_OSS_DEVICE(minor);
},
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
- .name = "IEC958 Preample Capture Default",
+ .name = "IEC958 Preamble Capture Default",
.access = SNDRV_CTL_ELEM_ACCESS_READ |
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_ak4113_spdif_pinfo,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
- .name = "IEC958 Preample Capture Default",
+ .name = "IEC958 Preamble Capture Default",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_ak4114_spdif_pinfo,
.get = snd_ak4114_spdif_pget,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
- .name = "IEC958 Preample Capture Default",
+ .name = "IEC958 Preamble Capture Default",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_ak4117_spdif_pinfo,
.get = snd_ak4117_spdif_pget,
{ TYPE_MAESTRO2E, 0x1179 },
{ TYPE_MAESTRO2E, 0x14c0 }, /* HP omnibook 4150 */
{ TYPE_MAESTRO2E, 0x1558 },
+ { TYPE_MAESTRO2E, 0x125d }, /* a PCI card, e.g. Terratec DMX */
+ { TYPE_MAESTRO2, 0x125d }, /* a PCI card, e.g. SF64-PCE2 */
};
static struct ess_device_list mpu_blacklist[] __devinitdata = {
/* Teradici */
{ PCI_DEVICE(0x6549, 0x1200),
.driver_data = AZX_DRIVER_TERA | AZX_DCAPS_NO_64BIT },
+ { PCI_DEVICE(0x6549, 0x2200),
+ .driver_data = AZX_DRIVER_TERA | AZX_DCAPS_NO_64BIT },
/* Creative X-Fi (CA0110-IBG) */
/* CTHDA chips */
{ PCI_DEVICE(0x1102, 0x0010),
if (spec->multiout.dig_out_nid) {
info++;
codec->num_pcms++;
+ codec->spdif_status_reset = 1;
info->name = "AD198x Digital";
info->pcm_type = HDA_PCM_TYPE_SPDIF;
info->stream[SNDRV_PCM_STREAM_PLAYBACK] = ad198x_pcm_digital_playback;
#define CS420X_VENDOR_NID 0x11
#define CS_DIG_OUT1_PIN_NID 0x10
#define CS_DIG_OUT2_PIN_NID 0x15
-#define CS_DMIC1_PIN_NID 0x12
-#define CS_DMIC2_PIN_NID 0x0e
+#define CS_DMIC1_PIN_NID 0x0e
+#define CS_DMIC2_PIN_NID 0x12
/* coef indices */
#define IDX_SPDIF_STAT 0x0000
cs_automic(codec, NULL);
coef = 0x000a; /* ADC1/2 - Digital and Analog Soft Ramp */
+ cs_vendor_coef_set(codec, IDX_ADC_CFG, coef);
+
+ coef = cs_vendor_coef_get(codec, IDX_BEEP_CFG);
if (is_active_pin(codec, CS_DMIC2_PIN_NID))
- coef |= 0x0500; /* DMIC2 2 chan on, GPIO1 off */
+ coef |= 1 << 4; /* DMIC2 2 chan on, GPIO1 off */
if (is_active_pin(codec, CS_DMIC1_PIN_NID))
- coef |= 0x1800; /* DMIC1 2 chan on, GPIO0 off
+ coef |= 1 << 3; /* DMIC1 2 chan on, GPIO0 off
* No effect if SPDIF_OUT2 is
* selected in IDX_SPDIF_CTL.
*/
- cs_vendor_coef_set(codec, IDX_ADC_CFG, coef);
+
+ cs_vendor_coef_set(codec, IDX_BEEP_CFG, coef);
} else {
if (spec->mic_detect)
cs_automic(codec, NULL);
| 0x0400 /* Disable Coefficient Auto increment */
)},
/* Beep */
- {0x11, AC_VERB_SET_COEF_INDEX, IDX_DAC_CFG},
+ {0x11, AC_VERB_SET_COEF_INDEX, IDX_BEEP_CFG},
{0x11, AC_VERB_SET_PROC_COEF, 0x0007}, /* Enable Beep thru DAC1/2/3 */
{} /* terminator */
}
-static struct snd_kcontrol_new cs421x_capture_source = {
-
+static const struct snd_kcontrol_new cs421x_capture_source = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
}
#endif
-static struct hda_codec_ops cs421x_patch_ops = {
+static const struct hda_codec_ops cs421x_patch_ops = {
.build_controls = cs421x_build_controls,
.build_pcms = cs_build_pcms,
.init = cs421x_init,
return alc_parse_auto_config(codec, alc269_ignore, ssids);
}
-static void alc269_toggle_power_output(struct hda_codec *codec, int power_up)
+static void alc269vb_toggle_power_output(struct hda_codec *codec, int power_up)
{
int val = alc_read_coef_idx(codec, 0x04);
if (power_up)
if (spec->codec_variant != ALC269_TYPE_ALC269VB)
return;
- if ((alc_get_coef0(codec) & 0x00ff) == 0x017)
- alc269_toggle_power_output(codec, 0);
- if ((alc_get_coef0(codec) & 0x00ff) == 0x018) {
- alc269_toggle_power_output(codec, 0);
+ if (spec->codec_variant == ALC269_TYPE_ALC269VB)
+ alc269vb_toggle_power_output(codec, 0);
+ if (spec->codec_variant == ALC269_TYPE_ALC269VB &&
+ (alc_get_coef0(codec) & 0x00ff) == 0x018) {
msleep(150);
}
}
{
struct alc_spec *spec = codec->spec;
- if (spec->codec_variant == ALC269_TYPE_ALC269VB ||
+ if (spec->codec_variant == ALC269_TYPE_ALC269VB)
+ alc269vb_toggle_power_output(codec, 0);
+ if (spec->codec_variant == ALC269_TYPE_ALC269VB &&
(alc_get_coef0(codec) & 0x00ff) == 0x018) {
- alc269_toggle_power_output(codec, 0);
msleep(150);
}
codec->patch_ops.init(codec);
- if (spec->codec_variant == ALC269_TYPE_ALC269VB ||
+ if (spec->codec_variant == ALC269_TYPE_ALC269VB)
+ alc269vb_toggle_power_output(codec, 1);
+ if (spec->codec_variant == ALC269_TYPE_ALC269VB &&
(alc_get_coef0(codec) & 0x00ff) == 0x017) {
- alc269_toggle_power_output(codec, 1);
msleep(200);
}
- if (spec->codec_variant == ALC269_TYPE_ALC269VB ||
- (alc_get_coef0(codec) & 0x00ff) == 0x018)
- alc269_toggle_power_output(codec, 1);
-
snd_hda_codec_resume_amp(codec);
snd_hda_codec_resume_cache(codec);
hda_call_check_power_status(codec, 0x01);
.patch = patch_alc662 },
{ .id = 0x10ec0663, .name = "ALC663", .patch = patch_alc662 },
{ .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 },
+ { .id = 0x10ec0668, .name = "ALC668", .patch = patch_alc662 },
{ .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 },
{ .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc882 },
{ .id = 0x10ec0892, .name = "ALC892", .patch = patch_alc662 },
{ .id = 0x10ec0899, .name = "ALC898", .patch = patch_alc882 },
+ { .id = 0x10ec0900, .name = "ALC1150", .patch = patch_alc882 },
{} /* terminator */
};
"HP", STAC_HP_ZEPHYR),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3660,
"HP Mini", STAC_92HD83XXX_HP_LED),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x144E,
+ "HP Pavilion dv5", STAC_92HD83XXX_HP_INV_LED),
{} /* terminator */
};
{
struct via_spec *spec = codec->spec;
const struct auto_pin_cfg *cfg = &spec->autocfg;
- int i, dac_num;
+ int i;
hda_nid_t nid;
+ spec->multiout.num_dacs = 0;
spec->multiout.dac_nids = spec->private_dac_nids;
- dac_num = 0;
for (i = 0; i < cfg->line_outs; i++) {
hda_nid_t dac = 0;
nid = cfg->line_out_pins[i];
if (!i && parse_output_path(codec, nid, dac, 1,
&spec->out_mix_path))
dac = spec->out_mix_path.path[0];
- if (dac) {
- spec->private_dac_nids[i] = dac;
- dac_num++;
- }
+ if (dac)
+ spec->private_dac_nids[spec->multiout.num_dacs++] = dac;
}
if (!spec->out_path[0].depth && spec->out_mix_path.depth) {
spec->out_path[0] = spec->out_mix_path;
spec->out_mix_path.depth = 0;
}
- spec->multiout.num_dacs = dac_num;
return 0;
}
*/
enum {
VIA_FIXUP_INTMIC_BOOST,
+ VIA_FIXUP_ASUS_G75,
};
static void via_fixup_intmic_boost(struct hda_codec *codec,
.type = HDA_FIXUP_FUNC,
.v.func = via_fixup_intmic_boost,
},
+ [VIA_FIXUP_ASUS_G75] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ /* set 0x24 and 0x33 as speakers */
+ { 0x24, 0x991301f0 },
+ { 0x33, 0x991301f1 }, /* subwoofer */
+ { }
+ }
+ },
};
static const struct snd_pci_quirk vt2002p_fixups[] = {
+ SND_PCI_QUIRK(0x1043, 0x1487, "Asus G75", VIA_FIXUP_ASUS_G75),
SND_PCI_QUIRK(0x1043, 0x8532, "Asus X202E", VIA_FIXUP_INTMIC_BOOST),
{}
};
+/* NIDs 0x24 and 0x33 on VT1802 have connections to non-existing NID 0x3e
+ * Replace this with mixer NID 0x1c
+ */
+static void fix_vt1802_connections(struct hda_codec *codec)
+{
+ static hda_nid_t conn_24[] = { 0x14, 0x1c };
+ static hda_nid_t conn_33[] = { 0x1c };
+
+ snd_hda_override_conn_list(codec, 0x24, ARRAY_SIZE(conn_24), conn_24);
+ snd_hda_override_conn_list(codec, 0x33, ARRAY_SIZE(conn_33), conn_33);
+}
+
/* patch for vt2002P */
static int patch_vt2002P(struct hda_codec *codec)
{
spec->aa_mix_nid = 0x21;
override_mic_boost(codec, 0x2b, 0, 3, 40);
override_mic_boost(codec, 0x29, 0, 3, 40);
+ if (spec->codec_type == VT1802)
+ fix_vt1802_connections(codec);
add_secret_dac_path(codec);
snd_hda_pick_fixup(codec, NULL, vt2002p_fixups, via_fixups);
ice->set_spdif_clock(ice, 0);
} else {
/* internal on-card clock */
- snd_vt1724_set_pro_rate(ice, ice->pro_rate_default, 1);
+ int rate;
+ if (ice->cur_rate)
+ rate = ice->cur_rate;
+ else
+ rate = ice->pro_rate_default;
+ snd_vt1724_set_pro_rate(ice, rate, 1);
}
update_spdif_bits(ice, ice->pm_saved_spdif_ctrl);
case 8: /* SYNC IN */
val = hdspm_sync_in_sync_check(hdspm); break;
default:
- val = hdspm_s1_sync_check(hdspm, ucontrol->id.index-1);
+ val = hdspm_s1_sync_check(hdspm,
+ kcontrol->private_value-1);
}
break;
insel = "Coaxial";
break;
default:
- insel = "Unkown";
+ insel = "Unknown";
}
snd_iprintf(buffer,
if ((freq >= CS42L52_MIN_CLK) && (freq <= CS42L52_MAX_CLK)) {
cs42l52->sysclk = freq;
} else {
- dev_err(codec->dev, "Invalid freq paramter\n");
+ dev_err(codec->dev, "Invalid freq parameter\n");
return -EINVAL;
}
return 0;
} while (count--);
if (count == 0)
- dev_warn(codec->dev, "No impedence range reported for jack\n");
+ dev_warn(codec->dev, "No impedance range reported for jack\n");
#ifndef CONFIG_SND_SOC_WM8994_MODULE
trace_snd_soc_jack_irq(dev_name(codec->dev));
#include <asm/fiq.h>
-#include <mach/irqs.h>
#include <linux/platform_data/asoc-imx-ssi.h>
#include "imx-ssi.h"
#include <sound/soc.h>
#include <linux/platform_data/asoc-imx-ssi.h>
-#include <mach/hardware.h>
#include "imx-ssi.h"
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
mutex_init(&dmic->mutex);
- dmic->fclk = clk_get(dmic->dev, "dmic_fck");
+ dmic->fclk = clk_get(dmic->dev, "fck");
if (IS_ERR(dmic->fclk)) {
- dev_err(dmic->dev, "cant get dmic_fck\n");
+ dev_err(dmic->dev, "cant get fck\n");
return -ENODEV;
}
#include <sound/dmaengine_pcm.h>
#include <sound/soc.h>
-#include <plat/cpu.h>
#include "omap-pcm.h"
+#ifdef CONFIG_ARCH_OMAP1
+#define pcm_omap1510() cpu_is_omap1510()
+#else
+#define pcm_omap1510() 0
+#endif
+
static const struct snd_pcm_hardware omap_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
{
snd_pcm_uframes_t offset;
- if (cpu_is_omap1510())
+ if (pcm_omap1510())
offset = snd_dmaengine_pcm_pointer_no_residue(substream);
else
offset = snd_dmaengine_pcm_pointer(substream);
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <sound/jack.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-#include <mach/board-zoom.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/gpio-omap.h>
/* Register descriptions for twl4030 codec part */
#include <linux/mfd/twl4030-audio.h>
}
mutex_init(&chip->mutex);
- mutex_init(&chip->shutdown_mutex);
+ init_rwsem(&chip->shutdown_rwsem);
chip->index = idx;
chip->dev = dev;
chip->card = card;
card = chip->card;
mutex_lock(®ister_mutex);
- mutex_lock(&chip->shutdown_mutex);
+ down_write(&chip->shutdown_rwsem);
chip->shutdown = 1;
chip->num_interfaces--;
if (chip->num_interfaces <= 0) {
snd_usb_mixer_disconnect(p);
}
usb_chip[chip->index] = NULL;
- mutex_unlock(&chip->shutdown_mutex);
+ up_write(&chip->shutdown_rwsem);
mutex_unlock(®ister_mutex);
snd_card_free_when_closed(card);
} else {
- mutex_unlock(&chip->shutdown_mutex);
+ up_write(&chip->shutdown_rwsem);
mutex_unlock(®ister_mutex);
}
}
{
int err = -ENODEV;
+ down_read(&chip->shutdown_rwsem);
if (!chip->shutdown && !chip->probing)
err = usb_autopm_get_interface(chip->pm_intf);
+ up_read(&chip->shutdown_rwsem);
return err;
}
void snd_usb_autosuspend(struct snd_usb_audio *chip)
{
+ down_read(&chip->shutdown_rwsem);
if (!chip->shutdown && !chip->probing)
usb_autopm_put_interface(chip->pm_intf);
+ up_read(&chip->shutdown_rwsem);
}
static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
struct snd_usb_endpoint *sync_endpoint;
unsigned long flags;
bool need_setup_ep; /* (re)configure EP at prepare? */
+ unsigned int speed; /* USB_SPEED_XXX */
u64 formats; /* format bitmasks (all or'ed) */
unsigned int num_formats; /* number of supported audio formats (list) */
#define EP_FLAG_ACTIVATED 0
#define EP_FLAG_RUNNING 1
+#define EP_FLAG_STOPPING 2
/*
* snd_usb_endpoint is a model that abstracts everything related to an
if (alive)
snd_printk(KERN_ERR "timeout: still %d active urbs on EP #%x\n",
alive, ep->ep_num);
+ clear_bit(EP_FLAG_STOPPING, &ep->flags);
return 0;
}
+/* sync the pending stop operation;
+ * this function itself doesn't trigger the stop operation
+ */
+void snd_usb_endpoint_sync_pending_stop(struct snd_usb_endpoint *ep)
+{
+ if (ep && test_bit(EP_FLAG_STOPPING, &ep->flags))
+ wait_clear_urbs(ep);
+}
+
/*
* unlink active urbs.
*/
if (wait)
wait_clear_urbs(ep);
+ else
+ set_bit(EP_FLAG_STOPPING, &ep->flags);
}
}
int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, int can_sleep);
void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep,
int force, int can_sleep, int wait);
+void snd_usb_endpoint_sync_pending_stop(struct snd_usb_endpoint *ep);
int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep);
int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep);
void snd_usb_endpoint_free(struct list_head *head);
unsigned char buf[2];
int val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1;
int timeout = 10;
- int err;
+ int idx = 0, err;
err = snd_usb_autoresume(cval->mixer->chip);
if (err < 0)
return -EIO;
+ down_read(&chip->shutdown_rwsem);
while (timeout-- > 0) {
+ if (chip->shutdown)
+ break;
+ idx = snd_usb_ctrl_intf(chip) | (cval->id << 8);
if (snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
- validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, val_len) >= val_len) {
+ validx, idx, buf, val_len) >= val_len) {
*value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len));
- snd_usb_autosuspend(cval->mixer->chip);
- return 0;
+ err = 0;
+ goto out;
}
}
- snd_usb_autosuspend(cval->mixer->chip);
snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
- request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type);
- return -EINVAL;
+ request, validx, idx, cval->val_type);
+ err = -EINVAL;
+
+ out:
+ up_read(&chip->shutdown_rwsem);
+ snd_usb_autosuspend(cval->mixer->chip);
+ return err;
}
static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int validx, int *value_ret)
struct snd_usb_audio *chip = cval->mixer->chip;
unsigned char buf[2 + 3*sizeof(__u16)]; /* enough space for one range */
unsigned char *val;
- int ret, size;
+ int idx = 0, ret, size;
__u8 bRequest;
if (request == UAC_GET_CUR) {
if (ret)
goto error;
- ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest,
+ down_read(&chip->shutdown_rwsem);
+ if (chip->shutdown)
+ ret = -ENODEV;
+ else {
+ idx = snd_usb_ctrl_intf(chip) | (cval->id << 8);
+ ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
- validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, size);
+ validx, idx, buf, size);
+ }
+ up_read(&chip->shutdown_rwsem);
snd_usb_autosuspend(chip);
if (ret < 0) {
error:
snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
- request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type);
+ request, validx, idx, cval->val_type);
return ret;
}
{
struct snd_usb_audio *chip = cval->mixer->chip;
unsigned char buf[2];
- int val_len, err, timeout = 10;
+ int idx = 0, val_len, err, timeout = 10;
if (cval->mixer->protocol == UAC_VERSION_1) {
val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1;
err = snd_usb_autoresume(chip);
if (err < 0)
return -EIO;
- while (timeout-- > 0)
+ down_read(&chip->shutdown_rwsem);
+ while (timeout-- > 0) {
+ if (chip->shutdown)
+ break;
+ idx = snd_usb_ctrl_intf(chip) | (cval->id << 8);
if (snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), request,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
- validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, val_len) >= 0) {
- snd_usb_autosuspend(chip);
- return 0;
+ validx, idx, buf, val_len) >= 0) {
+ err = 0;
+ goto out;
}
- snd_usb_autosuspend(chip);
+ }
snd_printdd(KERN_ERR "cannot set ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d, data = %#x/%#x\n",
- request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type, buf[0], buf[1]);
- return -EINVAL;
+ request, validx, idx, cval->val_type, buf[0], buf[1]);
+ err = -EINVAL;
+
+ out:
+ up_read(&chip->shutdown_rwsem);
+ snd_usb_autosuspend(chip);
+ return err;
}
static int set_cur_ctl_value(struct usb_mixer_elem_info *cval, int validx, int value)
if (value > 1)
return -EINVAL;
changed = value != mixer->audigy2nx_leds[index];
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown) {
+ err = -ENODEV;
+ goto out;
+ }
if (mixer->chip->usb_id == USB_ID(0x041e, 0x3042))
err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
value, index + 2, NULL, 0);
+ out:
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
mixer->audigy2nx_leds[index] = value;
for (i = 0; jacks[i].name; ++i) {
snd_iprintf(buffer, "%s: ", jacks[i].name);
- err = snd_usb_ctl_msg(mixer->chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = 0;
+ else
+ err = snd_usb_ctl_msg(mixer->chip->dev,
usb_rcvctrlpipe(mixer->chip->dev, 0),
UAC_GET_MEM, USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE, 0,
jacks[i].unitid << 8, buf, 3);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err == 3 && (buf[0] == 3 || buf[0] == 6))
snd_iprintf(buffer, "%02x %02x\n", buf[1], buf[2]);
else
else
new_status = old_status & ~0x02;
changed = new_status != old_status;
- err = snd_usb_ctl_msg(mixer->chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = -ENODEV;
+ else
+ err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x08,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
50, 0, &new_status, 1);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
mixer->xonar_u1_status = new_status;
u8 bRequest = (kcontrol->private_value >> 16) & 0xff;
u16 wIndex = kcontrol->private_value & 0xffff;
u8 tmp;
+ int ret;
- int ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ ret = -ENODEV;
+ else
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0, cpu_to_le16(wIndex),
&tmp, sizeof(tmp), 1000);
+ up_read(&mixer->chip->shutdown_rwsem);
if (ret < 0) {
snd_printk(KERN_ERR
u8 bRequest = (kcontrol->private_value >> 16) & 0xff;
u16 wIndex = kcontrol->private_value & 0xffff;
u16 wValue = ucontrol->value.integer.value[0];
+ int ret;
- int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), bRequest,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ ret = -ENODEV;
+ else
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), bRequest,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
cpu_to_le16(wValue), cpu_to_le16(wIndex),
NULL, 0, 1000);
+ up_read(&mixer->chip->shutdown_rwsem);
if (ret < 0) {
snd_printk(KERN_ERR
return -EINVAL;
- err = snd_usb_ctl_msg(chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = -ENODEV;
+ else
+ err = snd_usb_ctl_msg(chip->dev,
usb_rcvctrlpipe(chip->dev, 0), UAC_GET_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
validx << 8, snd_usb_ctrl_intf(chip) | (id << 8),
value, val_len);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
if (!pval->is_cached) {
/* Read current value */
- err = snd_usb_ctl_msg(chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = -ENODEV;
+ else
+ err = snd_usb_ctl_msg(chip->dev,
usb_rcvctrlpipe(chip->dev, 0), UAC_GET_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
validx << 8, snd_usb_ctrl_intf(chip) | (id << 8),
value, val_len);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
if (cur_val != new_val) {
value[0] = new_val;
value[1] = 0;
- err = snd_usb_ctl_msg(chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = -ENODEV;
+ else
+ err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), UAC_SET_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
validx << 8, snd_usb_ctrl_intf(chip) | (id << 8),
value, val_len);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
unsigned int hwptr_done;
subs = (struct snd_usb_substream *)substream->runtime->private_data;
+ if (subs->stream->chip->shutdown)
+ return SNDRV_PCM_POS_XRUN;
spin_lock(&subs->lock);
hwptr_done = subs->hwptr_done;
substream->runtime->delay = snd_usb_pcm_delay(subs,
{
int ret;
- mutex_lock(&subs->stream->chip->shutdown_mutex);
/* format changed */
stop_endpoints(subs, 0, 0, 0);
ret = snd_usb_endpoint_set_params(subs->data_endpoint,
subs->cur_audiofmt,
subs->sync_endpoint);
if (ret < 0)
- goto unlock;
+ return ret;
if (subs->sync_endpoint)
ret = snd_usb_endpoint_set_params(subs->data_endpoint,
subs->cur_rate,
subs->cur_audiofmt,
NULL);
-
-unlock:
- mutex_unlock(&subs->stream->chip->shutdown_mutex);
return ret;
}
return -EINVAL;
}
- if ((ret = set_format(subs, fmt)) < 0)
+ down_read(&subs->stream->chip->shutdown_rwsem);
+ if (subs->stream->chip->shutdown)
+ ret = -ENODEV;
+ else
+ ret = set_format(subs, fmt);
+ up_read(&subs->stream->chip->shutdown_rwsem);
+ if (ret < 0)
return ret;
subs->interface = fmt->iface;
subs->cur_audiofmt = NULL;
subs->cur_rate = 0;
subs->period_bytes = 0;
- mutex_lock(&subs->stream->chip->shutdown_mutex);
- stop_endpoints(subs, 0, 1, 1);
- deactivate_endpoints(subs);
- mutex_unlock(&subs->stream->chip->shutdown_mutex);
+ down_read(&subs->stream->chip->shutdown_rwsem);
+ if (!subs->stream->chip->shutdown) {
+ stop_endpoints(subs, 0, 1, 1);
+ deactivate_endpoints(subs);
+ }
+ up_read(&subs->stream->chip->shutdown_rwsem);
return snd_pcm_lib_free_vmalloc_buffer(substream);
}
return -ENXIO;
}
- if (snd_BUG_ON(!subs->data_endpoint))
- return -EIO;
+ down_read(&subs->stream->chip->shutdown_rwsem);
+ if (subs->stream->chip->shutdown) {
+ ret = -ENODEV;
+ goto unlock;
+ }
+ if (snd_BUG_ON(!subs->data_endpoint)) {
+ ret = -EIO;
+ goto unlock;
+ }
+
+ snd_usb_endpoint_sync_pending_stop(subs->sync_endpoint);
+ snd_usb_endpoint_sync_pending_stop(subs->data_endpoint);
ret = set_format(subs, subs->cur_audiofmt);
if (ret < 0)
- return ret;
+ goto unlock;
iface = usb_ifnum_to_if(subs->dev, subs->cur_audiofmt->iface);
alts = &iface->altsetting[subs->cur_audiofmt->altset_idx];
subs->cur_audiofmt,
subs->cur_rate);
if (ret < 0)
- return ret;
+ goto unlock;
if (subs->need_setup_ep) {
ret = configure_endpoint(subs);
if (ret < 0)
- return ret;
+ goto unlock;
subs->need_setup_ep = false;
}
/* for playback, submit the URBs now; otherwise, the first hwptr_done
* updates for all URBs would happen at the same time when starting */
if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK)
- return start_endpoints(subs, 1);
+ ret = start_endpoints(subs, 1);
- return 0;
+ unlock:
+ up_read(&subs->stream->chip->shutdown_rwsem);
+ return ret;
}
static struct snd_pcm_hardware snd_usb_hardware =
return 0;
}
/* check whether the period time is >= the data packet interval */
- if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL) {
+ if (subs->speed != USB_SPEED_FULL) {
ptime = 125 * (1 << fp->datainterval);
if (ptime > pt->max || (ptime == pt->max && pt->openmax)) {
hwc_debug(" > check: ptime %u > max %u\n", ptime, pt->max);
return err;
param_period_time_if_needed = SNDRV_PCM_HW_PARAM_PERIOD_TIME;
- if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL)
+ if (subs->speed == USB_SPEED_FULL)
/* full speed devices have fixed data packet interval */
ptmin = 1000;
if (ptmin == 1000)
}
snd_iprintf(buffer, "\n");
}
- if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL)
+ if (subs->speed != USB_SPEED_FULL)
snd_iprintf(buffer, " Data packet interval: %d us\n",
125 * (1 << fp->datainterval));
// snd_iprintf(buffer, " Max Packet Size = %d\n", fp->maxpacksize);
return;
snd_iprintf(buffer, " Packet Size = %d\n", ep->curpacksize);
snd_iprintf(buffer, " Momentary freq = %u Hz (%#x.%04x)\n",
- snd_usb_get_speed(subs->dev) == USB_SPEED_FULL
+ subs->speed == USB_SPEED_FULL
? get_full_speed_hz(ep->freqm)
: get_high_speed_hz(ep->freqm),
ep->freqm >> 16, ep->freqm & 0xffff);
subs->direction = stream;
subs->dev = as->chip->dev;
subs->txfr_quirk = as->chip->txfr_quirk;
+ subs->speed = snd_usb_get_speed(subs->dev);
snd_usb_set_pcm_ops(as->pcm, stream);
struct usb_interface *pm_intf;
u32 usb_id;
struct mutex mutex;
- struct mutex shutdown_mutex;
+ struct rw_semaphore shutdown_rwsem;
unsigned int shutdown:1;
unsigned int probing:1;
unsigned int autosuspended:1;
-TARGETS = breakpoints kcmp mqueue vm cpu-hotplug memory-hotplug epoll
+TARGETS = breakpoints kcmp mqueue vm cpu-hotplug memory-hotplug
all:
for TARGET in $(TARGETS); do \
+++ /dev/null
-# Makefile for epoll selftests
-
-all: test_epoll
-%: %.c
- gcc -pthread -g -o $@ $^
-
-run_tests: all
- ./test_epoll
-
-clean:
- $(RM) test_epoll
+++ /dev/null
-/*
- * tools/testing/selftests/epoll/test_epoll.c
- *
- * Copyright 2012 Adobe Systems Incorporated
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Paton J. Lewis <palewis@adobe.com>
- *
- */
-
-#include <errno.h>
-#include <fcntl.h>
-#include <pthread.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/epoll.h>
-#include <sys/socket.h>
-
-/*
- * A pointer to an epoll_item_private structure will be stored in the epoll
- * item's event structure so that we can get access to the epoll_item_private
- * data after calling epoll_wait:
- */
-struct epoll_item_private {
- int index; /* Position of this struct within the epoll_items array. */
- int fd;
- uint32_t events;
- pthread_mutex_t mutex; /* Guards the following variables... */
- int stop;
- int status; /* Stores any error encountered while handling item. */
- /* The following variable allows us to test whether we have encountered
- a problem while attempting to cancel and delete the associated
- event. When the test program exits, 'deleted' should be exactly
- one. If it is greater than one, then the failed test reflects a real
- world situation where we would have tried to access the epoll item's
- private data after deleting it: */
- int deleted;
-};
-
-struct epoll_item_private *epoll_items;
-
-/*
- * Delete the specified item from the epoll set. In a real-world secneario this
- * is where we would free the associated data structure, but in this testing
- * environment we retain the structure so that we can test for double-deletion:
- */
-void delete_item(int index)
-{
- __sync_fetch_and_add(&epoll_items[index].deleted, 1);
-}
-
-/*
- * A pointer to a read_thread_data structure will be passed as the argument to
- * each read thread:
- */
-struct read_thread_data {
- int stop;
- int status; /* Indicates any error encountered by the read thread. */
- int epoll_set;
-};
-
-/*
- * The function executed by the read threads:
- */
-void *read_thread_function(void *function_data)
-{
- struct read_thread_data *thread_data =
- (struct read_thread_data *)function_data;
- struct epoll_event event_data;
- struct epoll_item_private *item_data;
- char socket_data;
-
- /* Handle events until we encounter an error or this thread's 'stop'
- condition is set: */
- while (1) {
- int result = epoll_wait(thread_data->epoll_set,
- &event_data,
- 1, /* Number of desired events */
- 1000); /* Timeout in ms */
- if (result < 0) {
- /* Breakpoints signal all threads. Ignore that while
- debugging: */
- if (errno == EINTR)
- continue;
- thread_data->status = errno;
- return 0;
- } else if (thread_data->stop)
- return 0;
- else if (result == 0) /* Timeout */
- continue;
-
- /* We need the mutex here because checking for the stop
- condition and re-enabling the epoll item need to be done
- together as one atomic operation when EPOLL_CTL_DISABLE is
- available: */
- item_data = (struct epoll_item_private *)event_data.data.ptr;
- pthread_mutex_lock(&item_data->mutex);
-
- /* Remove the item from the epoll set if we want to stop
- handling that event: */
- if (item_data->stop)
- delete_item(item_data->index);
- else {
- /* Clear the data that was written to the other end of
- our non-blocking socket: */
- do {
- if (read(item_data->fd, &socket_data, 1) < 1) {
- if ((errno == EAGAIN) ||
- (errno == EWOULDBLOCK))
- break;
- else
- goto error_unlock;
- }
- } while (item_data->events & EPOLLET);
-
- /* The item was one-shot, so re-enable it: */
- event_data.events = item_data->events;
- if (epoll_ctl(thread_data->epoll_set,
- EPOLL_CTL_MOD,
- item_data->fd,
- &event_data) < 0)
- goto error_unlock;
- }
-
- pthread_mutex_unlock(&item_data->mutex);
- }
-
-error_unlock:
- thread_data->status = item_data->status = errno;
- pthread_mutex_unlock(&item_data->mutex);
- return 0;
-}
-
-/*
- * A pointer to a write_thread_data structure will be passed as the argument to
- * the write thread:
- */
-struct write_thread_data {
- int stop;
- int status; /* Indicates any error encountered by the write thread. */
- int n_fds;
- int *fds;
-};
-
-/*
- * The function executed by the write thread. It writes a single byte to each
- * socket in turn until the stop condition for this thread is set. If writing to
- * a socket would block (i.e. errno was EAGAIN), we leave that socket alone for
- * the moment and just move on to the next socket in the list. We don't care
- * about the order in which we deliver events to the epoll set. In fact we don't
- * care about the data we're writing to the pipes at all; we just want to
- * trigger epoll events:
- */
-void *write_thread_function(void *function_data)
-{
- const char data = 'X';
- int index;
- struct write_thread_data *thread_data =
- (struct write_thread_data *)function_data;
- while (!thread_data->stop)
- for (index = 0;
- !thread_data->stop && (index < thread_data->n_fds);
- ++index)
- if ((write(thread_data->fds[index], &data, 1) < 1) &&
- (errno != EAGAIN) &&
- (errno != EWOULDBLOCK)) {
- thread_data->status = errno;
- return;
- }
-}
-
-/*
- * Arguments are currently ignored:
- */
-int main(int argc, char **argv)
-{
- const int n_read_threads = 100;
- const int n_epoll_items = 500;
- int index;
- int epoll_set = epoll_create1(0);
- struct write_thread_data write_thread_data = {
- 0, 0, n_epoll_items, malloc(n_epoll_items * sizeof(int))
- };
- struct read_thread_data *read_thread_data =
- malloc(n_read_threads * sizeof(struct read_thread_data));
- pthread_t *read_threads = malloc(n_read_threads * sizeof(pthread_t));
- pthread_t write_thread;
-
- printf("-----------------\n");
- printf("Runing test_epoll\n");
- printf("-----------------\n");
-
- epoll_items = malloc(n_epoll_items * sizeof(struct epoll_item_private));
-
- if (epoll_set < 0 || epoll_items == 0 || write_thread_data.fds == 0 ||
- read_thread_data == 0 || read_threads == 0)
- goto error;
-
- if (sysconf(_SC_NPROCESSORS_ONLN) < 2) {
- printf("Error: please run this test on a multi-core system.\n");
- goto error;
- }
-
- /* Create the socket pairs and epoll items: */
- for (index = 0; index < n_epoll_items; ++index) {
- int socket_pair[2];
- struct epoll_event event_data;
- if (socketpair(AF_UNIX,
- SOCK_STREAM | SOCK_NONBLOCK,
- 0,
- socket_pair) < 0)
- goto error;
- write_thread_data.fds[index] = socket_pair[0];
- epoll_items[index].index = index;
- epoll_items[index].fd = socket_pair[1];
- if (pthread_mutex_init(&epoll_items[index].mutex, NULL) != 0)
- goto error;
- /* We always use EPOLLONESHOT because this test is currently
- structured to demonstrate the need for EPOLL_CTL_DISABLE,
- which only produces useful information in the EPOLLONESHOT
- case (without EPOLLONESHOT, calling epoll_ctl with
- EPOLL_CTL_DISABLE will never return EBUSY). If support for
- testing events without EPOLLONESHOT is desired, it should
- probably be implemented in a separate unit test. */
- epoll_items[index].events = EPOLLIN | EPOLLONESHOT;
- if (index < n_epoll_items / 2)
- epoll_items[index].events |= EPOLLET;
- epoll_items[index].stop = 0;
- epoll_items[index].status = 0;
- epoll_items[index].deleted = 0;
- event_data.events = epoll_items[index].events;
- event_data.data.ptr = &epoll_items[index];
- if (epoll_ctl(epoll_set,
- EPOLL_CTL_ADD,
- epoll_items[index].fd,
- &event_data) < 0)
- goto error;
- }
-
- /* Create and start the read threads: */
- for (index = 0; index < n_read_threads; ++index) {
- read_thread_data[index].stop = 0;
- read_thread_data[index].status = 0;
- read_thread_data[index].epoll_set = epoll_set;
- if (pthread_create(&read_threads[index],
- NULL,
- read_thread_function,
- &read_thread_data[index]) != 0)
- goto error;
- }
-
- if (pthread_create(&write_thread,
- NULL,
- write_thread_function,
- &write_thread_data) != 0)
- goto error;
-
- /* Cancel all event pollers: */
-#ifdef EPOLL_CTL_DISABLE
- for (index = 0; index < n_epoll_items; ++index) {
- pthread_mutex_lock(&epoll_items[index].mutex);
- ++epoll_items[index].stop;
- if (epoll_ctl(epoll_set,
- EPOLL_CTL_DISABLE,
- epoll_items[index].fd,
- NULL) == 0)
- delete_item(index);
- else if (errno != EBUSY) {
- pthread_mutex_unlock(&epoll_items[index].mutex);
- goto error;
- }
- /* EBUSY means events were being handled; allow the other thread
- to delete the item. */
- pthread_mutex_unlock(&epoll_items[index].mutex);
- }
-#else
- for (index = 0; index < n_epoll_items; ++index) {
- pthread_mutex_lock(&epoll_items[index].mutex);
- ++epoll_items[index].stop;
- pthread_mutex_unlock(&epoll_items[index].mutex);
- /* Wait in case a thread running read_thread_function is
- currently executing code between epoll_wait and
- pthread_mutex_lock with this item. Note that a longer delay
- would make double-deletion less likely (at the expense of
- performance), but there is no guarantee that any delay would
- ever be sufficient. Note also that we delete all event
- pollers at once for testing purposes, but in a real-world
- environment we are likely to want to be able to cancel event
- pollers at arbitrary times. Therefore we can't improve this
- situation by just splitting this loop into two loops
- (i.e. signal 'stop' for all items, sleep, and then delete all
- items). We also can't fix the problem via EPOLL_CTL_DEL
- because that command can't prevent the case where some other
- thread is executing read_thread_function within the region
- mentioned above: */
- usleep(1);
- pthread_mutex_lock(&epoll_items[index].mutex);
- if (!epoll_items[index].deleted)
- delete_item(index);
- pthread_mutex_unlock(&epoll_items[index].mutex);
- }
-#endif
-
- /* Shut down the read threads: */
- for (index = 0; index < n_read_threads; ++index)
- __sync_fetch_and_add(&read_thread_data[index].stop, 1);
- for (index = 0; index < n_read_threads; ++index) {
- if (pthread_join(read_threads[index], NULL) != 0)
- goto error;
- if (read_thread_data[index].status)
- goto error;
- }
-
- /* Shut down the write thread: */
- __sync_fetch_and_add(&write_thread_data.stop, 1);
- if ((pthread_join(write_thread, NULL) != 0) || write_thread_data.status)
- goto error;
-
- /* Check for final error conditions: */
- for (index = 0; index < n_epoll_items; ++index) {
- if (epoll_items[index].status != 0)
- goto error;
- if (pthread_mutex_destroy(&epoll_items[index].mutex) < 0)
- goto error;
- }
- for (index = 0; index < n_epoll_items; ++index)
- if (epoll_items[index].deleted != 1) {
- printf("Error: item data deleted %1d times.\n",
- epoll_items[index].deleted);
- goto error;
- }
-
- printf("[PASS]\n");
- return 0;
-
- error:
- printf("[FAIL]\n");
- return errno;
-}
projects / can-eth-gw-linux.git / commitdiff