drivers/hwmon/w83781d.c

   1 /*
   2  * w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
   3  *             monitoring
   4  * Copyright (c) 1998 - 2001  Frodo Looijaard <frodol@dds.nl>,
   5  *                            Philip Edelbrock <phil@netroedge.com>,
   6  *                            and Mark Studebaker <mdsxyz123@yahoo.com>
   7  * Copyright (c) 2007 - 2008  Jean Delvare <khali@linux-fr.org>
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22  */
  23
  24 /*
  25  * Supports following chips:
  26  *
  27  * Chip         #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
  28  * as99127f     7       3       0       3       0x31    0x12c3  yes     no
  29  * as99127f rev.2 (type_name = as99127f)        0x31    0x5ca3  yes     no
  30  * w83781d      7       3       0       3       0x10-1  0x5ca3  yes     yes
  31  * w83782d      9       3       2-4     3       0x30    0x5ca3  yes     yes
  32  * w83783s      5-6     3       2       1-2     0x40    0x5ca3  yes     no
  33  *
  34  */
  35
  36 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  37
  38 #include <linux/module.h>
  39 #include <linux/init.h>
  40 #include <linux/slab.h>
  41 #include <linux/jiffies.h>
  42 #include <linux/i2c.h>
  43 #include <linux/hwmon.h>
  44 #include <linux/hwmon-vid.h>
  45 #include <linux/hwmon-sysfs.h>
  46 #include <linux/sysfs.h>
  47 #include <linux/err.h>
  48 #include <linux/mutex.h>
  49
  50 #ifdef CONFIG_ISA
  51 #include <linux/platform_device.h>
  52 #include <linux/ioport.h>
  53 #include <linux/io.h>
  54 #endif
  55
  56 #include "lm75.h"
  57
  58 /* Addresses to scan */
  59 static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
  60                                                 0x2e, 0x2f, I2C_CLIENT_END };
  61
  62 enum chips { w83781d, w83782d, w83783s, as99127f };
  63
  64 /* Insmod parameters */
  65 static unsigned short force_subclients[4];
  66 module_param_array(force_subclients, short, NULL, 0);
  67 MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
  68                     "{bus, clientaddr, subclientaddr1, subclientaddr2}");
  69
  70 static bool reset;
  71 module_param(reset, bool, 0);
  72 MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
  73
  74 static bool init = 1;
  75 module_param(init, bool, 0);
  76 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
  77
  78 /* Constants specified below */
  79
  80 /* Length of ISA address segment */
  81 #define W83781D_EXTENT                  8
  82
  83 /* Where are the ISA address/data registers relative to the base address */
  84 #define W83781D_ADDR_REG_OFFSET         5
  85 #define W83781D_DATA_REG_OFFSET         6
  86
  87 /* The device registers */
  88 /* in nr from 0 to 8 */
  89 #define W83781D_REG_IN_MAX(nr)          ((nr < 7) ? (0x2b + (nr) * 2) : \
  90                                                     (0x554 + (((nr) - 7) * 2)))
  91 #define W83781D_REG_IN_MIN(nr)          ((nr < 7) ? (0x2c + (nr) * 2) : \
  92                                                     (0x555 + (((nr) - 7) * 2)))
  93 #define W83781D_REG_IN(nr)              ((nr < 7) ? (0x20 + (nr)) : \
  94                                                     (0x550 + (nr) - 7))
  95
  96 /* fan nr from 0 to 2 */
  97 #define W83781D_REG_FAN_MIN(nr)         (0x3b + (nr))
  98 #define W83781D_REG_FAN(nr)             (0x28 + (nr))
  99
 100 #define W83781D_REG_BANK                0x4E
 101 #define W83781D_REG_TEMP2_CONFIG        0x152
 102 #define W83781D_REG_TEMP3_CONFIG        0x252
 103 /* temp nr from 1 to 3 */
 104 #define W83781D_REG_TEMP(nr)            ((nr == 3) ? (0x0250) : \
 105                                         ((nr == 2) ? (0x0150) : \
 106                                                      (0x27)))
 107 #define W83781D_REG_TEMP_HYST(nr)       ((nr == 3) ? (0x253) : \
 108                                         ((nr == 2) ? (0x153) : \
 109                                                      (0x3A)))
 110 #define W83781D_REG_TEMP_OVER(nr)       ((nr == 3) ? (0x255) : \
 111                                         ((nr == 2) ? (0x155) : \
 112                                                      (0x39)))
 113
 114 #define W83781D_REG_CONFIG              0x40
 115
 116 /* Interrupt status (W83781D, AS99127F) */
 117 #define W83781D_REG_ALARM1              0x41
 118 #define W83781D_REG_ALARM2              0x42
 119
 120 /* Real-time status (W83782D, W83783S) */
 121 #define W83782D_REG_ALARM1              0x459
 122 #define W83782D_REG_ALARM2              0x45A
 123 #define W83782D_REG_ALARM3              0x45B
 124
 125 #define W83781D_REG_BEEP_CONFIG         0x4D
 126 #define W83781D_REG_BEEP_INTS1          0x56
 127 #define W83781D_REG_BEEP_INTS2          0x57
 128 #define W83781D_REG_BEEP_INTS3          0x453   /* not on W83781D */
 129
 130 #define W83781D_REG_VID_FANDIV          0x47
 131
 132 #define W83781D_REG_CHIPID              0x49
 133 #define W83781D_REG_WCHIPID             0x58
 134 #define W83781D_REG_CHIPMAN             0x4F
 135 #define W83781D_REG_PIN                 0x4B
 136
 137 /* 782D/783S only */
 138 #define W83781D_REG_VBAT                0x5D
 139
 140 /* PWM 782D (1-4) and 783S (1-2) only */
 141 static const u8 W83781D_REG_PWM[] = { 0x5B, 0x5A, 0x5E, 0x5F };
 142 #define W83781D_REG_PWMCLK12            0x5C
 143 #define W83781D_REG_PWMCLK34            0x45C
 144
 145 #define W83781D_REG_I2C_ADDR            0x48
 146 #define W83781D_REG_I2C_SUBADDR         0x4A
 147
 148 /*
 149  * The following are undocumented in the data sheets however we
 150  * received the information in an email from Winbond tech support
 151  */
 152 /* Sensor selection - not on 781d */
 153 #define W83781D_REG_SCFG1               0x5D
 154 static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
 155
 156 #define W83781D_REG_SCFG2               0x59
 157 static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
 158
 159 #define W83781D_DEFAULT_BETA            3435
 160
 161 /* Conversions */
 162 #define IN_TO_REG(val)                  SENSORS_LIMIT(((val) + 8) / 16, 0, 255)
 163 #define IN_FROM_REG(val)                ((val) * 16)
 164
 165 static inline u8
 166 FAN_TO_REG(long rpm, int div)
 167 {
 168         if (rpm == 0)
 169                 return 255;
 170         rpm = SENSORS_LIMIT(rpm, 1, 1000000);
 171         return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
 172 }
 173
 174 static inline long
 175 FAN_FROM_REG(u8 val, int div)
 176 {
 177         if (val == 0)
 178                 return -1;
 179         if (val == 255)
 180                 return 0;
 181         return 1350000 / (val * div);
 182 }
 183
 184 #define TEMP_TO_REG(val)                SENSORS_LIMIT((val) / 1000, -127, 128)
 185 #define TEMP_FROM_REG(val)              ((val) * 1000)
 186
 187 #define BEEP_MASK_FROM_REG(val, type)   ((type) == as99127f ? \
 188                                          (~(val)) & 0x7fff : (val) & 0xff7fff)
 189 #define BEEP_MASK_TO_REG(val, type)     ((type) == as99127f ? \
 190                                          (~(val)) & 0x7fff : (val) & 0xff7fff)
 191
 192 #define DIV_FROM_REG(val)               (1 << (val))
 193
 194 static inline u8
 195 DIV_TO_REG(long val, enum chips type)
 196 {
 197         int i;
 198         val = SENSORS_LIMIT(val, 1,
 199                             ((type == w83781d
 200                               || type == as99127f) ? 8 : 128)) >> 1;
 201         for (i = 0; i < 7; i++) {
 202                 if (val == 0)
 203                         break;
 204                 val >>= 1;
 205         }
 206         return i;
 207 }
 208
 209 struct w83781d_data {
 210         struct i2c_client *client;
 211         struct device *hwmon_dev;
 212         struct mutex lock;
 213         enum chips type;
 214
 215         /* For ISA device only */
 216         const char *name;
 217         int isa_addr;
 218
 219         struct mutex update_lock;
 220         char valid;             /* !=0 if following fields are valid */
 221         unsigned long last_updated;     /* In jiffies */
 222
 223         struct i2c_client *lm75[2];     /* for secondary I2C addresses */
 224         /* array of 2 pointers to subclients */
 225
 226         u8 in[9];               /* Register value - 8 & 9 for 782D only */
 227         u8 in_max[9];           /* Register value - 8 & 9 for 782D only */
 228         u8 in_min[9];           /* Register value - 8 & 9 for 782D only */
 229         u8 fan[3];              /* Register value */
 230         u8 fan_min[3];          /* Register value */
 231         s8 temp;                /* Register value */
 232         s8 temp_max;            /* Register value */
 233         s8 temp_max_hyst;       /* Register value */
 234         u16 temp_add[2];        /* Register value */
 235         u16 temp_max_add[2];    /* Register value */
 236         u16 temp_max_hyst_add[2];       /* Register value */
 237         u8 fan_div[3];          /* Register encoding, shifted right */
 238         u8 vid;                 /* Register encoding, combined */
 239         u32 alarms;             /* Register encoding, combined */
 240         u32 beep_mask;          /* Register encoding, combined */
 241         u8 pwm[4];              /* Register value */
 242         u8 pwm2_enable;         /* Boolean */
 243         u16 sens[3];            /*
 244                                  * 782D/783S only.
 245                                  * 1 = pentium diode; 2 = 3904 diode;
 246                                  * 4 = thermistor
 247                                  */
 248         u8 vrm;
 249 };
 250
 251 static struct w83781d_data *w83781d_data_if_isa(void);
 252 static int w83781d_alias_detect(struct i2c_client *client, u8 chipid);
 253
 254 static int w83781d_read_value(struct w83781d_data *data, u16 reg);
 255 static int w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value);
 256 static struct w83781d_data *w83781d_update_device(struct device *dev);
 257 static void w83781d_init_device(struct device *dev);
 258
 259 /* following are the sysfs callback functions */
 260 #define show_in_reg(reg) \
 261 static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
 262                 char *buf) \
 263 { \
 264         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 265         struct w83781d_data *data = w83781d_update_device(dev); \
 266         return sprintf(buf, "%ld\n", \
 267                        (long)IN_FROM_REG(data->reg[attr->index])); \
 268 }
 269 show_in_reg(in);
 270 show_in_reg(in_min);
 271 show_in_reg(in_max);
 272
 273 #define store_in_reg(REG, reg) \
 274 static ssize_t store_in_##reg(struct device *dev, struct device_attribute \
 275                 *da, const char *buf, size_t count) \
 276 { \
 277         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 278         struct w83781d_data *data = dev_get_drvdata(dev); \
 279         int nr = attr->index; \
 280         unsigned long val; \
 281         int err = kstrtoul(buf, 10, &val); \
 282         if (err) \
 283                 return err; \
 284         mutex_lock(&data->update_lock); \
 285         data->in_##reg[nr] = IN_TO_REG(val); \
 286         w83781d_write_value(data, W83781D_REG_IN_##REG(nr), \
 287                             data->in_##reg[nr]); \
 288         \
 289         mutex_unlock(&data->update_lock); \
 290         return count; \
 291 }
 292 store_in_reg(MIN, min);
 293 store_in_reg(MAX, max);
 294
 295 #define sysfs_in_offsets(offset) \
 296 static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
 297                 show_in, NULL, offset); \
 298 static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
 299                 show_in_min, store_in_min, offset); \
 300 static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
 301                 show_in_max, store_in_max, offset)
 302
 303 sysfs_in_offsets(0);
 304 sysfs_in_offsets(1);
 305 sysfs_in_offsets(2);
 306 sysfs_in_offsets(3);
 307 sysfs_in_offsets(4);
 308 sysfs_in_offsets(5);
 309 sysfs_in_offsets(6);
 310 sysfs_in_offsets(7);
 311 sysfs_in_offsets(8);
 312
 313 #define show_fan_reg(reg) \
 314 static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
 315                 char *buf) \
 316 { \
 317         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 318         struct w83781d_data *data = w83781d_update_device(dev); \
 319         return sprintf(buf, "%ld\n", \
 320                 FAN_FROM_REG(data->reg[attr->index], \
 321                         DIV_FROM_REG(data->fan_div[attr->index]))); \
 322 }
 323 show_fan_reg(fan);
 324 show_fan_reg(fan_min);
 325
 326 static ssize_t
 327 store_fan_min(struct device *dev, struct device_attribute *da,
 328                 const char *buf, size_t count)
 329 {
 330         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 331         struct w83781d_data *data = dev_get_drvdata(dev);
 332         int nr = attr->index;
 333         unsigned long val;
 334         int err;
 335
 336         err = kstrtoul(buf, 10, &val);
 337         if (err)
 338                 return err;
 339
 340         mutex_lock(&data->update_lock);
 341         data->fan_min[nr] =
 342             FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
 343         w83781d_write_value(data, W83781D_REG_FAN_MIN(nr),
 344                             data->fan_min[nr]);
 345
 346         mutex_unlock(&data->update_lock);
 347         return count;
 348 }
 349
 350 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
 351 static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
 352                 show_fan_min, store_fan_min, 0);
 353 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
 354 static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
 355                 show_fan_min, store_fan_min, 1);
 356 static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
 357 static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
 358                 show_fan_min, store_fan_min, 2);
 359
 360 #define show_temp_reg(reg) \
 361 static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
 362                 char *buf) \
 363 { \
 364         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 365         struct w83781d_data *data = w83781d_update_device(dev); \
 366         int nr = attr->index; \
 367         if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
 368                 return sprintf(buf, "%d\n", \
 369                         LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
 370         } else {        /* TEMP1 */ \
 371                 return sprintf(buf, "%ld\n", (long)TEMP_FROM_REG(data->reg)); \
 372         } \
 373 }
 374 show_temp_reg(temp);
 375 show_temp_reg(temp_max);
 376 show_temp_reg(temp_max_hyst);
 377
 378 #define store_temp_reg(REG, reg) \
 379 static ssize_t store_temp_##reg(struct device *dev, \
 380                 struct device_attribute *da, const char *buf, size_t count) \
 381 { \
 382         struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
 383         struct w83781d_data *data = dev_get_drvdata(dev); \
 384         int nr = attr->index; \
 385         long val; \
 386         int err = kstrtol(buf, 10, &val); \
 387         if (err) \
 388                 return err; \
 389         mutex_lock(&data->update_lock); \
 390          \
 391         if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
 392                 data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
 393                 w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
 394                                 data->temp_##reg##_add[nr-2]); \
 395         } else {        /* TEMP1 */ \
 396                 data->temp_##reg = TEMP_TO_REG(val); \
 397                 w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
 398                         data->temp_##reg); \
 399         } \
 400          \
 401         mutex_unlock(&data->update_lock); \
 402         return count; \
 403 }
 404 store_temp_reg(OVER, max);
 405 store_temp_reg(HYST, max_hyst);
 406
 407 #define sysfs_temp_offsets(offset) \
 408 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
 409                 show_temp, NULL, offset); \
 410 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
 411                 show_temp_max, store_temp_max, offset); \
 412 static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
 413                 show_temp_max_hyst, store_temp_max_hyst, offset);
 414
 415 sysfs_temp_offsets(1);
 416 sysfs_temp_offsets(2);
 417 sysfs_temp_offsets(3);
 418
 419 static ssize_t
 420 show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
 421 {
 422         struct w83781d_data *data = w83781d_update_device(dev);
 423         return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
 424 }
 425
 426 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
 427
 428 static ssize_t
 429 show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
 430 {
 431         struct w83781d_data *data = dev_get_drvdata(dev);
 432         return sprintf(buf, "%ld\n", (long) data->vrm);
 433 }
 434
 435 static ssize_t
 436 store_vrm_reg(struct device *dev, struct device_attribute *attr,
 437               const char *buf, size_t count)
 438 {
 439         struct w83781d_data *data = dev_get_drvdata(dev);
 440         unsigned long val;
 441         int err;
 442
 443         err = kstrtoul(buf, 10, &val);
 444         if (err)
 445                 return err;
 446         data->vrm = SENSORS_LIMIT(val, 0, 255);
 447
 448         return count;
 449 }
 450
 451 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
 452
 453 static ssize_t
 454 show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
 455 {
 456         struct w83781d_data *data = w83781d_update_device(dev);
 457         return sprintf(buf, "%u\n", data->alarms);
 458 }
 459
 460 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
 461
 462 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
 463                 char *buf)
 464 {
 465         struct w83781d_data *data = w83781d_update_device(dev);
 466         int bitnr = to_sensor_dev_attr(attr)->index;
 467         return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 468 }
 469
 470 /* The W83781D has a single alarm bit for temp2 and temp3 */
 471 static ssize_t show_temp3_alarm(struct device *dev,
 472                 struct device_attribute *attr, char *buf)
 473 {
 474         struct w83781d_data *data = w83781d_update_device(dev);
 475         int bitnr = (data->type == w83781d) ? 5 : 13;
 476         return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 477 }
 478
 479 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
 480 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
 481 static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
 482 static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
 483 static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
 484 static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
 485 static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10);
 486 static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16);
 487 static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17);
 488 static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
 489 static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
 490 static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
 491 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
 492 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
 493 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_temp3_alarm, NULL, 0);
 494
 495 static ssize_t show_beep_mask(struct device *dev,
 496                                struct device_attribute *attr, char *buf)
 497 {
 498         struct w83781d_data *data = w83781d_update_device(dev);
 499         return sprintf(buf, "%ld\n",
 500                        (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
 501 }
 502
 503 static ssize_t
 504 store_beep_mask(struct device *dev, struct device_attribute *attr,
 505                 const char *buf, size_t count)
 506 {
 507         struct w83781d_data *data = dev_get_drvdata(dev);
 508         unsigned long val;
 509         int err;
 510
 511         err = kstrtoul(buf, 10, &val);
 512         if (err)
 513                 return err;
 514
 515         mutex_lock(&data->update_lock);
 516         data->beep_mask &= 0x8000; /* preserve beep enable */
 517         data->beep_mask |= BEEP_MASK_TO_REG(val, data->type);
 518         w83781d_write_value(data, W83781D_REG_BEEP_INTS1,
 519                             data->beep_mask & 0xff);
 520         w83781d_write_value(data, W83781D_REG_BEEP_INTS2,
 521                             (data->beep_mask >> 8) & 0xff);
 522         if (data->type != w83781d && data->type != as99127f) {
 523                 w83781d_write_value(data, W83781D_REG_BEEP_INTS3,
 524                                     ((data->beep_mask) >> 16) & 0xff);
 525         }
 526         mutex_unlock(&data->update_lock);
 527
 528         return count;
 529 }
 530
 531 static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR,
 532                 show_beep_mask, store_beep_mask);
 533
 534 static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
 535                 char *buf)
 536 {
 537         struct w83781d_data *data = w83781d_update_device(dev);
 538         int bitnr = to_sensor_dev_attr(attr)->index;
 539         return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
 540 }
 541
 542 static ssize_t
 543 store_beep(struct device *dev, struct device_attribute *attr,
 544                 const char *buf, size_t count)
 545 {
 546         struct w83781d_data *data = dev_get_drvdata(dev);
 547         int bitnr = to_sensor_dev_attr(attr)->index;
 548         u8 reg;
 549         unsigned long bit;
 550         int err;
 551
 552         err = kstrtoul(buf, 10, &bit);
 553         if (err)
 554                 return err;
 555
 556         if (bit & ~1)
 557                 return -EINVAL;
 558
 559         mutex_lock(&data->update_lock);
 560         if (bit)
 561                 data->beep_mask |= (1 << bitnr);
 562         else
 563                 data->beep_mask &= ~(1 << bitnr);
 564
 565         if (bitnr < 8) {
 566                 reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
 567                 if (bit)
 568                         reg |= (1 << bitnr);
 569                 else
 570                         reg &= ~(1 << bitnr);
 571                 w83781d_write_value(data, W83781D_REG_BEEP_INTS1, reg);
 572         } else if (bitnr < 16) {
 573                 reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
 574                 if (bit)
 575                         reg |= (1 << (bitnr - 8));
 576                 else
 577                         reg &= ~(1 << (bitnr - 8));
 578                 w83781d_write_value(data, W83781D_REG_BEEP_INTS2, reg);
 579         } else {
 580                 reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS3);
 581                 if (bit)
 582                         reg |= (1 << (bitnr - 16));
 583                 else
 584                         reg &= ~(1 << (bitnr - 16));
 585                 w83781d_write_value(data, W83781D_REG_BEEP_INTS3, reg);
 586         }
 587         mutex_unlock(&data->update_lock);
 588
 589         return count;
 590 }
 591
 592 /* The W83781D has a single beep bit for temp2 and temp3 */
 593 static ssize_t show_temp3_beep(struct device *dev,
 594                 struct device_attribute *attr, char *buf)
 595 {
 596         struct w83781d_data *data = w83781d_update_device(dev);
 597         int bitnr = (data->type == w83781d) ? 5 : 13;
 598         return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
 599 }
 600
 601 static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
 602                         show_beep, store_beep, 0);
 603 static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR,
 604                         show_beep, store_beep, 1);
 605 static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR,
 606                         show_beep, store_beep, 2);
 607 static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR,
 608                         show_beep, store_beep, 3);
 609 static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR,
 610                         show_beep, store_beep, 8);
 611 static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR,
 612                         show_beep, store_beep, 9);
 613 static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR,
 614                         show_beep, store_beep, 10);
 615 static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR,
 616                         show_beep, store_beep, 16);
 617 static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR,
 618                         show_beep, store_beep, 17);
 619 static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR,
 620                         show_beep, store_beep, 6);
 621 static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR,
 622                         show_beep, store_beep, 7);
 623 static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR,
 624                         show_beep, store_beep, 11);
 625 static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
 626                         show_beep, store_beep, 4);
 627 static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR,
 628                         show_beep, store_beep, 5);
 629 static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO,
 630                         show_temp3_beep, store_beep, 13);
 631 static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
 632                         show_beep, store_beep, 15);
 633
 634 static ssize_t
 635 show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
 636 {
 637         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 638         struct w83781d_data *data = w83781d_update_device(dev);
 639         return sprintf(buf, "%ld\n",
 640                        (long) DIV_FROM_REG(data->fan_div[attr->index]));
 641 }
 642
 643 /*
 644  * Note: we save and restore the fan minimum here, because its value is
 645  * determined in part by the fan divisor.  This follows the principle of
 646  * least surprise; the user doesn't expect the fan minimum to change just
 647  * because the divisor changed.
 648  */
 649 static ssize_t
 650 store_fan_div(struct device *dev, struct device_attribute *da,
 651                 const char *buf, size_t count)
 652 {
 653         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 654         struct w83781d_data *data = dev_get_drvdata(dev);
 655         unsigned long min;
 656         int nr = attr->index;
 657         u8 reg;
 658         unsigned long val;
 659         int err;
 660
 661         err = kstrtoul(buf, 10, &val);
 662         if (err)
 663                 return err;
 664
 665         mutex_lock(&data->update_lock);
 666
 667         /* Save fan_min */
 668         min = FAN_FROM_REG(data->fan_min[nr],
 669                            DIV_FROM_REG(data->fan_div[nr]));
 670
 671         data->fan_div[nr] = DIV_TO_REG(val, data->type);
 672
 673         reg = (w83781d_read_value(data, nr == 2 ?
 674                                   W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
 675                 & (nr == 0 ? 0xcf : 0x3f))
 676               | ((data->fan_div[nr] & 0x03) << (nr == 0 ? 4 : 6));
 677         w83781d_write_value(data, nr == 2 ?
 678                             W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
 679
 680         /* w83781d and as99127f don't have extended divisor bits */
 681         if (data->type != w83781d && data->type != as99127f) {
 682                 reg = (w83781d_read_value(data, W83781D_REG_VBAT)
 683                        & ~(1 << (5 + nr)))
 684                     | ((data->fan_div[nr] & 0x04) << (3 + nr));
 685                 w83781d_write_value(data, W83781D_REG_VBAT, reg);
 686         }
 687
 688         /* Restore fan_min */
 689         data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
 690         w83781d_write_value(data, W83781D_REG_FAN_MIN(nr), data->fan_min[nr]);
 691
 692         mutex_unlock(&data->update_lock);
 693         return count;
 694 }
 695
 696 static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
 697                 show_fan_div, store_fan_div, 0);
 698 static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
 699                 show_fan_div, store_fan_div, 1);
 700 static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR,
 701                 show_fan_div, store_fan_div, 2);
 702
 703 static ssize_t
 704 show_pwm(struct device *dev, struct device_attribute *da, char *buf)
 705 {
 706         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 707         struct w83781d_data *data = w83781d_update_device(dev);
 708         return sprintf(buf, "%d\n", (int)data->pwm[attr->index]);
 709 }
 710
 711 static ssize_t
 712 show_pwm2_enable(struct device *dev, struct device_attribute *da, char *buf)
 713 {
 714         struct w83781d_data *data = w83781d_update_device(dev);
 715         return sprintf(buf, "%d\n", (int)data->pwm2_enable);
 716 }
 717
 718 static ssize_t
 719 store_pwm(struct device *dev, struct device_attribute *da, const char *buf,
 720                 size_t count)
 721 {
 722         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 723         struct w83781d_data *data = dev_get_drvdata(dev);
 724         int nr = attr->index;
 725         unsigned long val;
 726         int err;
 727
 728         err = kstrtoul(buf, 10, &val);
 729         if (err)
 730                 return err;
 731
 732         mutex_lock(&data->update_lock);
 733         data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
 734         w83781d_write_value(data, W83781D_REG_PWM[nr], data->pwm[nr]);
 735         mutex_unlock(&data->update_lock);
 736         return count;
 737 }
 738
 739 static ssize_t
 740 store_pwm2_enable(struct device *dev, struct device_attribute *da,
 741                 const char *buf, size_t count)
 742 {
 743         struct w83781d_data *data = dev_get_drvdata(dev);
 744         unsigned long val;
 745         u32 reg;
 746         int err;
 747
 748         err = kstrtoul(buf, 10, &val);
 749         if (err)
 750                 return err;
 751
 752         mutex_lock(&data->update_lock);
 753
 754         switch (val) {
 755         case 0:
 756         case 1:
 757                 reg = w83781d_read_value(data, W83781D_REG_PWMCLK12);
 758                 w83781d_write_value(data, W83781D_REG_PWMCLK12,
 759                                     (reg & 0xf7) | (val << 3));
 760
 761                 reg = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
 762                 w83781d_write_value(data, W83781D_REG_BEEP_CONFIG,
 763                                     (reg & 0xef) | (!val << 4));
 764
 765                 data->pwm2_enable = val;
 766                 break;
 767
 768         default:
 769                 mutex_unlock(&data->update_lock);
 770                 return -EINVAL;
 771         }
 772
 773         mutex_unlock(&data->update_lock);
 774         return count;
 775 }
 776
 777 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 0);
 778 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 1);
 779 static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 2);
 780 static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 3);
 781 /* only PWM2 can be enabled/disabled */
 782 static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
 783                 show_pwm2_enable, store_pwm2_enable);
 784
 785 static ssize_t
 786 show_sensor(struct device *dev, struct device_attribute *da, char *buf)
 787 {
 788         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 789         struct w83781d_data *data = w83781d_update_device(dev);
 790         return sprintf(buf, "%d\n", (int)data->sens[attr->index]);
 791 }
 792
 793 static ssize_t
 794 store_sensor(struct device *dev, struct device_attribute *da,
 795                 const char *buf, size_t count)
 796 {
 797         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 798         struct w83781d_data *data = dev_get_drvdata(dev);
 799         int nr = attr->index;
 800         unsigned long val;
 801         u32 tmp;
 802         int err;
 803
 804         err = kstrtoul(buf, 10, &val);
 805         if (err)
 806                 return err;
 807
 808         mutex_lock(&data->update_lock);
 809
 810         switch (val) {
 811         case 1:         /* PII/Celeron diode */
 812                 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 813                 w83781d_write_value(data, W83781D_REG_SCFG1,
 814                                     tmp | BIT_SCFG1[nr]);
 815                 tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
 816                 w83781d_write_value(data, W83781D_REG_SCFG2,
 817                                     tmp | BIT_SCFG2[nr]);
 818                 data->sens[nr] = val;
 819                 break;
 820         case 2:         /* 3904 */
 821                 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 822                 w83781d_write_value(data, W83781D_REG_SCFG1,
 823                                     tmp | BIT_SCFG1[nr]);
 824                 tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
 825                 w83781d_write_value(data, W83781D_REG_SCFG2,
 826                                     tmp & ~BIT_SCFG2[nr]);
 827                 data->sens[nr] = val;
 828                 break;
 829         case W83781D_DEFAULT_BETA:
 830                 dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
 831                          "instead\n", W83781D_DEFAULT_BETA);
 832                 /* fall through */
 833         case 4:         /* thermistor */
 834                 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
 835                 w83781d_write_value(data, W83781D_REG_SCFG1,
 836                                     tmp & ~BIT_SCFG1[nr]);
 837                 data->sens[nr] = val;
 838                 break;
 839         default:
 840                 dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or 4\n",
 841                        (long) val);
 842                 break;
 843         }
 844
 845         mutex_unlock(&data->update_lock);
 846         return count;
 847 }
 848
 849 static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR,
 850         show_sensor, store_sensor, 0);
 851 static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
 852         show_sensor, store_sensor, 1);
 853 static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
 854         show_sensor, store_sensor, 2);
 855
 856 /*
 857  * Assumes that adapter is of I2C, not ISA variety.
 858  * OTHERWISE DON'T CALL THIS
 859  */
 860 static int
 861 w83781d_detect_subclients(struct i2c_client *new_client)
 862 {
 863         int i, val1 = 0, id;
 864         int err;
 865         int address = new_client->addr;
 866         unsigned short sc_addr[2];
 867         struct i2c_adapter *adapter = new_client->adapter;
 868         struct w83781d_data *data = i2c_get_clientdata(new_client);
 869         enum chips kind = data->type;
 870         int num_sc = 1;
 871
 872         id = i2c_adapter_id(adapter);
 873
 874         if (force_subclients[0] == id && force_subclients[1] == address) {
 875                 for (i = 2; i <= 3; i++) {
 876                         if (force_subclients[i] < 0x48 ||
 877                             force_subclients[i] > 0x4f) {
 878                                 dev_err(&new_client->dev, "Invalid subclient "
 879                                         "address %d; must be 0x48-0x4f\n",
 880                                         force_subclients[i]);
 881                                 err = -EINVAL;
 882                                 goto ERROR_SC_1;
 883                         }
 884                 }
 885                 w83781d_write_value(data, W83781D_REG_I2C_SUBADDR,
 886                                 (force_subclients[2] & 0x07) |
 887                                 ((force_subclients[3] & 0x07) << 4));
 888                 sc_addr[0] = force_subclients[2];
 889         } else {
 890                 val1 = w83781d_read_value(data, W83781D_REG_I2C_SUBADDR);
 891                 sc_addr[0] = 0x48 + (val1 & 0x07);
 892         }
 893
 894         if (kind != w83783s) {
 895                 num_sc = 2;
 896                 if (force_subclients[0] == id &&
 897                     force_subclients[1] == address) {
 898                         sc_addr[1] = force_subclients[3];
 899                 } else {
 900                         sc_addr[1] = 0x48 + ((val1 >> 4) & 0x07);
 901                 }
 902                 if (sc_addr[0] == sc_addr[1]) {
 903                         dev_err(&new_client->dev,
 904                                "Duplicate addresses 0x%x for subclients.\n",
 905                                sc_addr[0]);
 906                         err = -EBUSY;
 907                         goto ERROR_SC_2;
 908                 }
 909         }
 910
 911         for (i = 0; i < num_sc; i++) {
 912                 data->lm75[i] = i2c_new_dummy(adapter, sc_addr[i]);
 913                 if (!data->lm75[i]) {
 914                         dev_err(&new_client->dev, "Subclient %d "
 915                                 "registration at address 0x%x "
 916                                 "failed.\n", i, sc_addr[i]);
 917                         err = -ENOMEM;
 918                         if (i == 1)
 919                                 goto ERROR_SC_3;
 920                         goto ERROR_SC_2;
 921                 }
 922         }
 923
 924         return 0;
 925
 926 /* Undo inits in case of errors */
 927 ERROR_SC_3:
 928         i2c_unregister_device(data->lm75[0]);
 929 ERROR_SC_2:
 930 ERROR_SC_1:
 931         return err;
 932 }
 933
 934 #define IN_UNIT_ATTRS(X)                                        \
 935         &sensor_dev_attr_in##X##_input.dev_attr.attr,           \
 936         &sensor_dev_attr_in##X##_min.dev_attr.attr,             \
 937         &sensor_dev_attr_in##X##_max.dev_attr.attr,             \
 938         &sensor_dev_attr_in##X##_alarm.dev_attr.attr,           \
 939         &sensor_dev_attr_in##X##_beep.dev_attr.attr
 940
 941 #define FAN_UNIT_ATTRS(X)                                       \
 942         &sensor_dev_attr_fan##X##_input.dev_attr.attr,          \
 943         &sensor_dev_attr_fan##X##_min.dev_attr.attr,            \
 944         &sensor_dev_attr_fan##X##_div.dev_attr.attr,            \
 945         &sensor_dev_attr_fan##X##_alarm.dev_attr.attr,          \
 946         &sensor_dev_attr_fan##X##_beep.dev_attr.attr
 947
 948 #define TEMP_UNIT_ATTRS(X)                                      \
 949         &sensor_dev_attr_temp##X##_input.dev_attr.attr,         \
 950         &sensor_dev_attr_temp##X##_max.dev_attr.attr,           \
 951         &sensor_dev_attr_temp##X##_max_hyst.dev_attr.attr,      \
 952         &sensor_dev_attr_temp##X##_alarm.dev_attr.attr,         \
 953         &sensor_dev_attr_temp##X##_beep.dev_attr.attr
 954
 955 static struct attribute *w83781d_attributes[] = {
 956         IN_UNIT_ATTRS(0),
 957         IN_UNIT_ATTRS(2),
 958         IN_UNIT_ATTRS(3),
 959         IN_UNIT_ATTRS(4),
 960         IN_UNIT_ATTRS(5),
 961         IN_UNIT_ATTRS(6),
 962         FAN_UNIT_ATTRS(1),
 963         FAN_UNIT_ATTRS(2),
 964         FAN_UNIT_ATTRS(3),
 965         TEMP_UNIT_ATTRS(1),
 966         TEMP_UNIT_ATTRS(2),
 967         &dev_attr_cpu0_vid.attr,
 968         &dev_attr_vrm.attr,
 969         &dev_attr_alarms.attr,
 970         &dev_attr_beep_mask.attr,
 971         &sensor_dev_attr_beep_enable.dev_attr.attr,
 972         NULL
 973 };
 974 static const struct attribute_group w83781d_group = {
 975         .attrs = w83781d_attributes,
 976 };
 977
 978 static struct attribute *w83781d_attributes_in1[] = {
 979         IN_UNIT_ATTRS(1),
 980         NULL
 981 };
 982 static const struct attribute_group w83781d_group_in1 = {
 983         .attrs = w83781d_attributes_in1,
 984 };
 985
 986 static struct attribute *w83781d_attributes_in78[] = {
 987         IN_UNIT_ATTRS(7),
 988         IN_UNIT_ATTRS(8),
 989         NULL
 990 };
 991 static const struct attribute_group w83781d_group_in78 = {
 992         .attrs = w83781d_attributes_in78,
 993 };
 994
 995 static struct attribute *w83781d_attributes_temp3[] = {
 996         TEMP_UNIT_ATTRS(3),
 997         NULL
 998 };
 999 static const struct attribute_group w83781d_group_temp3 = {
1000         .attrs = w83781d_attributes_temp3,
1001 };
1002
1003 static struct attribute *w83781d_attributes_pwm12[] = {
1004         &sensor_dev_attr_pwm1.dev_attr.attr,
1005         &sensor_dev_attr_pwm2.dev_attr.attr,
1006         &dev_attr_pwm2_enable.attr,
1007         NULL
1008 };
1009 static const struct attribute_group w83781d_group_pwm12 = {
1010         .attrs = w83781d_attributes_pwm12,
1011 };
1012
1013 static struct attribute *w83781d_attributes_pwm34[] = {
1014         &sensor_dev_attr_pwm3.dev_attr.attr,
1015         &sensor_dev_attr_pwm4.dev_attr.attr,
1016         NULL
1017 };
1018 static const struct attribute_group w83781d_group_pwm34 = {
1019         .attrs = w83781d_attributes_pwm34,
1020 };
1021
1022 static struct attribute *w83781d_attributes_other[] = {
1023         &sensor_dev_attr_temp1_type.dev_attr.attr,
1024         &sensor_dev_attr_temp2_type.dev_attr.attr,
1025         &sensor_dev_attr_temp3_type.dev_attr.attr,
1026         NULL
1027 };
1028 static const struct attribute_group w83781d_group_other = {
1029         .attrs = w83781d_attributes_other,
1030 };
1031
1032 /* No clean up is done on error, it's up to the caller */
1033 static int
1034 w83781d_create_files(struct device *dev, int kind, int is_isa)
1035 {
1036         int err;
1037
1038         err = sysfs_create_group(&dev->kobj, &w83781d_group);
1039         if (err)
1040                 return err;
1041
1042         if (kind != w83783s) {
1043                 err = sysfs_create_group(&dev->kobj, &w83781d_group_in1);
1044                 if (err)
1045                         return err;
1046         }
1047         if (kind != as99127f && kind != w83781d && kind != w83783s) {
1048                 err = sysfs_create_group(&dev->kobj, &w83781d_group_in78);
1049                 if (err)
1050                         return err;
1051         }
1052         if (kind != w83783s) {
1053                 err = sysfs_create_group(&dev->kobj, &w83781d_group_temp3);
1054                 if (err)
1055                         return err;
1056
1057                 if (kind != w83781d) {
1058                         err = sysfs_chmod_file(&dev->kobj,
1059                                 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1060                                 S_IRUGO | S_IWUSR);
1061                         if (err)
1062                                 return err;
1063                 }
1064         }
1065
1066         if (kind != w83781d && kind != as99127f) {
1067                 err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm12);
1068                 if (err)
1069                         return err;
1070         }
1071         if (kind == w83782d && !is_isa) {
1072                 err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm34);
1073                 if (err)
1074                         return err;
1075         }
1076
1077         if (kind != as99127f && kind != w83781d) {
1078                 err = device_create_file(dev,
1079                                          &sensor_dev_attr_temp1_type.dev_attr);
1080                 if (err)
1081                         return err;
1082                 err = device_create_file(dev,
1083                                          &sensor_dev_attr_temp2_type.dev_attr);
1084                 if (err)
1085                         return err;
1086                 if (kind != w83783s) {
1087                         err = device_create_file(dev,
1088                                         &sensor_dev_attr_temp3_type.dev_attr);
1089                         if (err)
1090                                 return err;
1091                 }
1092         }
1093
1094         return 0;
1095 }
1096
1097 /* Return 0 if detection is successful, -ENODEV otherwise */
1098 static int
1099 w83781d_detect(struct i2c_client *client, struct i2c_board_info *info)
1100 {
1101         int val1, val2;
1102         struct w83781d_data *isa = w83781d_data_if_isa();
1103         struct i2c_adapter *adapter = client->adapter;
1104         int address = client->addr;
1105         const char *client_name;
1106         enum vendor { winbond, asus } vendid;
1107
1108         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1109                 return -ENODEV;
1110
1111         /*
1112          * We block updates of the ISA device to minimize the risk of
1113          * concurrent access to the same W83781D chip through different
1114          * interfaces.
1115          */
1116         if (isa)
1117                 mutex_lock(&isa->update_lock);
1118
1119         if (i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG) & 0x80) {
1120                 dev_dbg(&adapter->dev,
1121                         "Detection of w83781d chip failed at step 3\n");
1122                 goto err_nodev;
1123         }
1124
1125         val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
1126         val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
1127         /* Check for Winbond or Asus ID if in bank 0 */
1128         if (!(val1 & 0x07) &&
1129             ((!(val1 & 0x80) && val2 != 0xa3 && val2 != 0xc3) ||
1130              ((val1 & 0x80) && val2 != 0x5c && val2 != 0x12))) {
1131                 dev_dbg(&adapter->dev,
1132                         "Detection of w83781d chip failed at step 4\n");
1133                 goto err_nodev;
1134         }
1135         /*
1136          * If Winbond SMBus, check address at 0x48.
1137          * Asus doesn't support, except for as99127f rev.2
1138          */
1139         if ((!(val1 & 0x80) && val2 == 0xa3) ||
1140             ((val1 & 0x80) && val2 == 0x5c)) {
1141                 if (i2c_smbus_read_byte_data(client, W83781D_REG_I2C_ADDR)
1142                     != address) {
1143                         dev_dbg(&adapter->dev,
1144                                 "Detection of w83781d chip failed at step 5\n");
1145                         goto err_nodev;
1146                 }
1147         }
1148
1149         /* Put it now into bank 0 and Vendor ID High Byte */
1150         i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1151                 (i2c_smbus_read_byte_data(client, W83781D_REG_BANK)
1152                  & 0x78) | 0x80);
1153
1154         /* Get the vendor ID */
1155         val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
1156         if (val2 == 0x5c)
1157                 vendid = winbond;
1158         else if (val2 == 0x12)
1159                 vendid = asus;
1160         else {
1161                 dev_dbg(&adapter->dev,
1162                         "w83781d chip vendor is neither Winbond nor Asus\n");
1163                 goto err_nodev;
1164         }
1165
1166         /* Determine the chip type. */
1167         val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
1168         if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
1169                 client_name = "w83781d";
1170         else if (val1 == 0x30 && vendid == winbond)
1171                 client_name = "w83782d";
1172         else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
1173                 client_name = "w83783s";
1174         else if (val1 == 0x31)
1175                 client_name = "as99127f";
1176         else
1177                 goto err_nodev;
1178
1179         if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
1180                 dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
1181                         "be the same as ISA device\n", address);
1182                 goto err_nodev;
1183         }
1184
1185         if (isa)
1186                 mutex_unlock(&isa->update_lock);
1187
1188         strlcpy(info->type, client_name, I2C_NAME_SIZE);
1189
1190         return 0;
1191
1192  err_nodev:
1193         if (isa)
1194                 mutex_unlock(&isa->update_lock);
1195         return -ENODEV;
1196 }
1197
1198 static void w83781d_remove_files(struct device *dev)
1199 {
1200         sysfs_remove_group(&dev->kobj, &w83781d_group);
1201         sysfs_remove_group(&dev->kobj, &w83781d_group_in1);
1202         sysfs_remove_group(&dev->kobj, &w83781d_group_in78);
1203         sysfs_remove_group(&dev->kobj, &w83781d_group_temp3);
1204         sysfs_remove_group(&dev->kobj, &w83781d_group_pwm12);
1205         sysfs_remove_group(&dev->kobj, &w83781d_group_pwm34);
1206         sysfs_remove_group(&dev->kobj, &w83781d_group_other);
1207 }
1208
1209 static int
1210 w83781d_probe(struct i2c_client *client, const struct i2c_device_id *id)
1211 {
1212         struct device *dev = &client->dev;
1213         struct w83781d_data *data;
1214         int err;
1215
1216         data = devm_kzalloc(dev, sizeof(struct w83781d_data), GFP_KERNEL);
1217         if (!data)
1218                 return -ENOMEM;
1219
1220         i2c_set_clientdata(client, data);
1221         mutex_init(&data->lock);
1222         mutex_init(&data->update_lock);
1223
1224         data->type = id->driver_data;
1225         data->client = client;
1226
1227         /* attach secondary i2c lm75-like clients */
1228         err = w83781d_detect_subclients(client);
1229         if (err)
1230                 return err;
1231
1232         /* Initialize the chip */
1233         w83781d_init_device(dev);
1234
1235         /* Register sysfs hooks */
1236         err = w83781d_create_files(dev, data->type, 0);
1237         if (err)
1238                 goto exit_remove_files;
1239
1240         data->hwmon_dev = hwmon_device_register(dev);
1241         if (IS_ERR(data->hwmon_dev)) {
1242                 err = PTR_ERR(data->hwmon_dev);
1243                 goto exit_remove_files;
1244         }
1245
1246         return 0;
1247
1248  exit_remove_files:
1249         w83781d_remove_files(dev);
1250         if (data->lm75[0])
1251                 i2c_unregister_device(data->lm75[0]);
1252         if (data->lm75[1])
1253                 i2c_unregister_device(data->lm75[1]);
1254         return err;
1255 }
1256
1257 static int
1258 w83781d_remove(struct i2c_client *client)
1259 {
1260         struct w83781d_data *data = i2c_get_clientdata(client);
1261         struct device *dev = &client->dev;
1262
1263         hwmon_device_unregister(data->hwmon_dev);
1264         w83781d_remove_files(dev);
1265
1266         if (data->lm75[0])
1267                 i2c_unregister_device(data->lm75[0]);
1268         if (data->lm75[1])
1269                 i2c_unregister_device(data->lm75[1]);
1270
1271         return 0;
1272 }
1273
1274 static int
1275 w83781d_read_value_i2c(struct w83781d_data *data, u16 reg)
1276 {
1277         struct i2c_client *client = data->client;
1278         int res, bank;
1279         struct i2c_client *cl;
1280
1281         bank = (reg >> 8) & 0x0f;
1282         if (bank > 2)
1283                 /* switch banks */
1284                 i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1285                                           bank);
1286         if (bank == 0 || bank > 2) {
1287                 res = i2c_smbus_read_byte_data(client, reg & 0xff);
1288         } else {
1289                 /* switch to subclient */
1290                 cl = data->lm75[bank - 1];
1291                 /* convert from ISA to LM75 I2C addresses */
1292                 switch (reg & 0xff) {
1293                 case 0x50:      /* TEMP */
1294                         res = i2c_smbus_read_word_swapped(cl, 0);
1295                         break;
1296                 case 0x52:      /* CONFIG */
1297                         res = i2c_smbus_read_byte_data(cl, 1);
1298                         break;
1299                 case 0x53:      /* HYST */
1300                         res = i2c_smbus_read_word_swapped(cl, 2);
1301                         break;
1302                 case 0x55:      /* OVER */
1303                 default:
1304                         res = i2c_smbus_read_word_swapped(cl, 3);
1305                         break;
1306                 }
1307         }
1308         if (bank > 2)
1309                 i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1310
1311         return res;
1312 }
1313
1314 static int
1315 w83781d_write_value_i2c(struct w83781d_data *data, u16 reg, u16 value)
1316 {
1317         struct i2c_client *client = data->client;
1318         int bank;
1319         struct i2c_client *cl;
1320
1321         bank = (reg >> 8) & 0x0f;
1322         if (bank > 2)
1323                 /* switch banks */
1324                 i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1325                                           bank);
1326         if (bank == 0 || bank > 2) {
1327                 i2c_smbus_write_byte_data(client, reg & 0xff,
1328                                           value & 0xff);
1329         } else {
1330                 /* switch to subclient */
1331                 cl = data->lm75[bank - 1];
1332                 /* convert from ISA to LM75 I2C addresses */
1333                 switch (reg & 0xff) {
1334                 case 0x52:      /* CONFIG */
1335                         i2c_smbus_write_byte_data(cl, 1, value & 0xff);
1336                         break;
1337                 case 0x53:      /* HYST */
1338                         i2c_smbus_write_word_swapped(cl, 2, value);
1339                         break;
1340                 case 0x55:      /* OVER */
1341                         i2c_smbus_write_word_swapped(cl, 3, value);
1342                         break;
1343                 }
1344         }
1345         if (bank > 2)
1346                 i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1347
1348         return 0;
1349 }
1350
1351 static void
1352 w83781d_init_device(struct device *dev)
1353 {
1354         struct w83781d_data *data = dev_get_drvdata(dev);
1355         int i, p;
1356         int type = data->type;
1357         u8 tmp;
1358
1359         if (reset && type != as99127f) { /*
1360                                           * this resets registers we don't have
1361                                           * documentation for on the as99127f
1362                                           */
1363                 /*
1364                  * Resetting the chip has been the default for a long time,
1365                  * but it causes the BIOS initializations (fan clock dividers,
1366                  * thermal sensor types...) to be lost, so it is now optional.
1367                  * It might even go away if nobody reports it as being useful,
1368                  * as I see very little reason why this would be needed at
1369                  * all.
1370                  */
1371                 dev_info(dev, "If reset=1 solved a problem you were "
1372                          "having, please report!\n");
1373
1374                 /* save these registers */
1375                 i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
1376                 p = w83781d_read_value(data, W83781D_REG_PWMCLK12);
1377                 /*
1378                  * Reset all except Watchdog values and last conversion values
1379                  * This sets fan-divs to 2, among others
1380                  */
1381                 w83781d_write_value(data, W83781D_REG_CONFIG, 0x80);
1382                 /*
1383                  * Restore the registers and disable power-on abnormal beep.
1384                  * This saves FAN 1/2/3 input/output values set by BIOS.
1385                  */
1386                 w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1387                 w83781d_write_value(data, W83781D_REG_PWMCLK12, p);
1388                 /*
1389                  * Disable master beep-enable (reset turns it on).
1390                  * Individual beep_mask should be reset to off but for some
1391                  * reason disabling this bit helps some people not get beeped
1392                  */
1393                 w83781d_write_value(data, W83781D_REG_BEEP_INTS2, 0);
1394         }
1395
1396         /*
1397          * Disable power-on abnormal beep, as advised by the datasheet.
1398          * Already done if reset=1.
1399          */
1400         if (init && !reset && type != as99127f) {
1401                 i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
1402                 w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1403         }
1404
1405         data->vrm = vid_which_vrm();
1406
1407         if ((type != w83781d) && (type != as99127f)) {
1408                 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
1409                 for (i = 1; i <= 3; i++) {
1410                         if (!(tmp & BIT_SCFG1[i - 1])) {
1411                                 data->sens[i - 1] = 4;
1412                         } else {
1413                                 if (w83781d_read_value
1414                                     (data,
1415                                      W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1416                                         data->sens[i - 1] = 1;
1417                                 else
1418                                         data->sens[i - 1] = 2;
1419                         }
1420                         if (type == w83783s && i == 2)
1421                                 break;
1422                 }
1423         }
1424
1425         if (init && type != as99127f) {
1426                 /* Enable temp2 */
1427                 tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG);
1428                 if (tmp & 0x01) {
1429                         dev_warn(dev, "Enabling temp2, readings "
1430                                  "might not make sense\n");
1431                         w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG,
1432                                 tmp & 0xfe);
1433                 }
1434
1435                 /* Enable temp3 */
1436                 if (type != w83783s) {
1437                         tmp = w83781d_read_value(data,
1438                                 W83781D_REG_TEMP3_CONFIG);
1439                         if (tmp & 0x01) {
1440                                 dev_warn(dev, "Enabling temp3, "
1441                                          "readings might not make sense\n");
1442                                 w83781d_write_value(data,
1443                                         W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
1444                         }
1445                 }
1446         }
1447
1448         /* Start monitoring */
1449         w83781d_write_value(data, W83781D_REG_CONFIG,
1450                             (w83781d_read_value(data,
1451                                                 W83781D_REG_CONFIG) & 0xf7)
1452                             | 0x01);
1453
1454         /* A few vars need to be filled upon startup */
1455         for (i = 0; i < 3; i++) {
1456                 data->fan_min[i] = w83781d_read_value(data,
1457                                         W83781D_REG_FAN_MIN(i));
1458         }
1459
1460         mutex_init(&data->update_lock);
1461 }
1462
1463 static struct w83781d_data *w83781d_update_device(struct device *dev)
1464 {
1465         struct w83781d_data *data = dev_get_drvdata(dev);
1466         struct i2c_client *client = data->client;
1467         int i;
1468
1469         mutex_lock(&data->update_lock);
1470
1471         if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1472             || !data->valid) {
1473                 dev_dbg(dev, "Starting device update\n");
1474
1475                 for (i = 0; i <= 8; i++) {
1476                         if (data->type == w83783s && i == 1)
1477                                 continue;       /* 783S has no in1 */
1478                         data->in[i] =
1479                             w83781d_read_value(data, W83781D_REG_IN(i));
1480                         data->in_min[i] =
1481                             w83781d_read_value(data, W83781D_REG_IN_MIN(i));
1482                         data->in_max[i] =
1483                             w83781d_read_value(data, W83781D_REG_IN_MAX(i));
1484                         if ((data->type != w83782d) && (i == 6))
1485                                 break;
1486                 }
1487                 for (i = 0; i < 3; i++) {
1488                         data->fan[i] =
1489                             w83781d_read_value(data, W83781D_REG_FAN(i));
1490                         data->fan_min[i] =
1491                             w83781d_read_value(data, W83781D_REG_FAN_MIN(i));
1492                 }
1493                 if (data->type != w83781d && data->type != as99127f) {
1494                         for (i = 0; i < 4; i++) {
1495                                 data->pwm[i] =
1496                                     w83781d_read_value(data,
1497                                                        W83781D_REG_PWM[i]);
1498                                 /* Only W83782D on SMBus has PWM3 and PWM4 */
1499                                 if ((data->type != w83782d || !client)
1500                                     && i == 1)
1501                                         break;
1502                         }
1503                         /* Only PWM2 can be disabled */
1504                         data->pwm2_enable = (w83781d_read_value(data,
1505                                              W83781D_REG_PWMCLK12) & 0x08) >> 3;
1506                 }
1507
1508                 data->temp = w83781d_read_value(data, W83781D_REG_TEMP(1));
1509                 data->temp_max =
1510                     w83781d_read_value(data, W83781D_REG_TEMP_OVER(1));
1511                 data->temp_max_hyst =
1512                     w83781d_read_value(data, W83781D_REG_TEMP_HYST(1));
1513                 data->temp_add[0] =
1514                     w83781d_read_value(data, W83781D_REG_TEMP(2));
1515                 data->temp_max_add[0] =
1516                     w83781d_read_value(data, W83781D_REG_TEMP_OVER(2));
1517                 data->temp_max_hyst_add[0] =
1518                     w83781d_read_value(data, W83781D_REG_TEMP_HYST(2));
1519                 if (data->type != w83783s) {
1520                         data->temp_add[1] =
1521                             w83781d_read_value(data, W83781D_REG_TEMP(3));
1522                         data->temp_max_add[1] =
1523                             w83781d_read_value(data,
1524                                                W83781D_REG_TEMP_OVER(3));
1525                         data->temp_max_hyst_add[1] =
1526                             w83781d_read_value(data,
1527                                                W83781D_REG_TEMP_HYST(3));
1528                 }
1529                 i = w83781d_read_value(data, W83781D_REG_VID_FANDIV);
1530                 data->vid = i & 0x0f;
1531                 data->vid |= (w83781d_read_value(data,
1532                                         W83781D_REG_CHIPID) & 0x01) << 4;
1533                 data->fan_div[0] = (i >> 4) & 0x03;
1534                 data->fan_div[1] = (i >> 6) & 0x03;
1535                 data->fan_div[2] = (w83781d_read_value(data,
1536                                         W83781D_REG_PIN) >> 6) & 0x03;
1537                 if ((data->type != w83781d) && (data->type != as99127f)) {
1538                         i = w83781d_read_value(data, W83781D_REG_VBAT);
1539                         data->fan_div[0] |= (i >> 3) & 0x04;
1540                         data->fan_div[1] |= (i >> 4) & 0x04;
1541                         data->fan_div[2] |= (i >> 5) & 0x04;
1542                 }
1543                 if (data->type == w83782d) {
1544                         data->alarms = w83781d_read_value(data,
1545                                                 W83782D_REG_ALARM1)
1546                                      | (w83781d_read_value(data,
1547                                                 W83782D_REG_ALARM2) << 8)
1548                                      | (w83781d_read_value(data,
1549                                                 W83782D_REG_ALARM3) << 16);
1550                 } else if (data->type == w83783s) {
1551                         data->alarms = w83781d_read_value(data,
1552                                                 W83782D_REG_ALARM1)
1553                                      | (w83781d_read_value(data,
1554                                                 W83782D_REG_ALARM2) << 8);
1555                 } else {
1556                         /*
1557                          * No real-time status registers, fall back to
1558                          * interrupt status registers
1559                          */
1560                         data->alarms = w83781d_read_value(data,
1561                                                 W83781D_REG_ALARM1)
1562                                      | (w83781d_read_value(data,
1563                                                 W83781D_REG_ALARM2) << 8);
1564                 }
1565                 i = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
1566                 data->beep_mask = (i << 8) +
1567                     w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
1568                 if ((data->type != w83781d) && (data->type != as99127f)) {
1569                         data->beep_mask |=
1570                             w83781d_read_value(data,
1571                                                W83781D_REG_BEEP_INTS3) << 16;
1572                 }
1573                 data->last_updated = jiffies;
1574                 data->valid = 1;
1575         }
1576
1577         mutex_unlock(&data->update_lock);
1578
1579         return data;
1580 }
1581
1582 static const struct i2c_device_id w83781d_ids[] = {
1583         { "w83781d", w83781d, },
1584         { "w83782d", w83782d, },
1585         { "w83783s", w83783s, },
1586         { "as99127f", as99127f },
1587         { /* LIST END */ }
1588 };
1589 MODULE_DEVICE_TABLE(i2c, w83781d_ids);
1590
1591 static struct i2c_driver w83781d_driver = {
1592         .class          = I2C_CLASS_HWMON,
1593         .driver = {
1594                 .name = "w83781d",
1595         },
1596         .probe          = w83781d_probe,
1597         .remove         = w83781d_remove,
1598         .id_table       = w83781d_ids,
1599         .detect         = w83781d_detect,
1600         .address_list   = normal_i2c,
1601 };
1602
1603 /*
1604  * ISA related code
1605  */
1606 #ifdef CONFIG_ISA
1607
1608 /* ISA device, if found */
1609 static struct platform_device *pdev;
1610
1611 static unsigned short isa_address = 0x290;
1612
1613 /*
1614  * I2C devices get this name attribute automatically, but for ISA devices
1615  * we must create it by ourselves.
1616  */
1617 static ssize_t
1618 show_name(struct device *dev, struct device_attribute *devattr, char *buf)
1619 {
1620         struct w83781d_data *data = dev_get_drvdata(dev);
1621         return sprintf(buf, "%s\n", data->name);
1622 }
1623 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
1624
1625 static struct w83781d_data *w83781d_data_if_isa(void)
1626 {
1627         return pdev ? platform_get_drvdata(pdev) : NULL;
1628 }
1629
1630 /* Returns 1 if the I2C chip appears to be an alias of the ISA chip */
1631 static int w83781d_alias_detect(struct i2c_client *client, u8 chipid)
1632 {
1633         struct w83781d_data *isa;
1634         int i;
1635
1636         if (!pdev)      /* No ISA chip */
1637                 return 0;
1638
1639         isa = platform_get_drvdata(pdev);
1640
1641         if (w83781d_read_value(isa, W83781D_REG_I2C_ADDR) != client->addr)
1642                 return 0;       /* Address doesn't match */
1643         if (w83781d_read_value(isa, W83781D_REG_WCHIPID) != chipid)
1644                 return 0;       /* Chip type doesn't match */
1645
1646         /*
1647          * We compare all the limit registers, the config register and the
1648          * interrupt mask registers
1649          */
1650         for (i = 0x2b; i <= 0x3d; i++) {
1651                 if (w83781d_read_value(isa, i) !=
1652                     i2c_smbus_read_byte_data(client, i))
1653                         return 0;
1654         }
1655         if (w83781d_read_value(isa, W83781D_REG_CONFIG) !=
1656             i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG))
1657                 return 0;
1658         for (i = 0x43; i <= 0x46; i++) {
1659                 if (w83781d_read_value(isa, i) !=
1660                     i2c_smbus_read_byte_data(client, i))
1661                         return 0;
1662         }
1663
1664         return 1;
1665 }
1666
1667 static int
1668 w83781d_read_value_isa(struct w83781d_data *data, u16 reg)
1669 {
1670         int word_sized, res;
1671
1672         word_sized = (((reg & 0xff00) == 0x100)
1673                       || ((reg & 0xff00) == 0x200))
1674             && (((reg & 0x00ff) == 0x50)
1675                 || ((reg & 0x00ff) == 0x53)
1676                 || ((reg & 0x00ff) == 0x55));
1677         if (reg & 0xff00) {
1678                 outb_p(W83781D_REG_BANK,
1679                        data->isa_addr + W83781D_ADDR_REG_OFFSET);
1680                 outb_p(reg >> 8,
1681                        data->isa_addr + W83781D_DATA_REG_OFFSET);
1682         }
1683         outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
1684         res = inb_p(data->isa_addr + W83781D_DATA_REG_OFFSET);
1685         if (word_sized) {
1686                 outb_p((reg & 0xff) + 1,
1687                        data->isa_addr + W83781D_ADDR_REG_OFFSET);
1688                 res =
1689                     (res << 8) + inb_p(data->isa_addr +
1690                                        W83781D_DATA_REG_OFFSET);
1691         }
1692         if (reg & 0xff00) {
1693                 outb_p(W83781D_REG_BANK,
1694                        data->isa_addr + W83781D_ADDR_REG_OFFSET);
1695                 outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
1696         }
1697         return res;
1698 }
1699
1700 static void
1701 w83781d_write_value_isa(struct w83781d_data *data, u16 reg, u16 value)
1702 {
1703         int word_sized;
1704
1705         word_sized = (((reg & 0xff00) == 0x100)
1706                       || ((reg & 0xff00) == 0x200))
1707             && (((reg & 0x00ff) == 0x53)
1708                 || ((reg & 0x00ff) == 0x55));
1709         if (reg & 0xff00) {
1710                 outb_p(W83781D_REG_BANK,
1711                        data->isa_addr + W83781D_ADDR_REG_OFFSET);
1712                 outb_p(reg >> 8,
1713                        data->isa_addr + W83781D_DATA_REG_OFFSET);
1714         }
1715         outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
1716         if (word_sized) {
1717                 outb_p(value >> 8,
1718                        data->isa_addr + W83781D_DATA_REG_OFFSET);
1719                 outb_p((reg & 0xff) + 1,
1720                        data->isa_addr + W83781D_ADDR_REG_OFFSET);
1721         }
1722         outb_p(value & 0xff, data->isa_addr + W83781D_DATA_REG_OFFSET);
1723         if (reg & 0xff00) {
1724                 outb_p(W83781D_REG_BANK,
1725                        data->isa_addr + W83781D_ADDR_REG_OFFSET);
1726                 outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
1727         }
1728 }
1729
1730 /*
1731  * The SMBus locks itself, usually, but nothing may access the Winbond between
1732  * bank switches. ISA access must always be locked explicitly!
1733  * We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
1734  * would slow down the W83781D access and should not be necessary.
1735  * There are some ugly typecasts here, but the good news is - they should
1736  * nowhere else be necessary!
1737  */
1738 static int
1739 w83781d_read_value(struct w83781d_data *data, u16 reg)
1740 {
1741         struct i2c_client *client = data->client;
1742         int res;
1743
1744         mutex_lock(&data->lock);
1745         if (client)
1746                 res = w83781d_read_value_i2c(data, reg);
1747         else
1748                 res = w83781d_read_value_isa(data, reg);
1749         mutex_unlock(&data->lock);
1750         return res;
1751 }
1752
1753 static int
1754 w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
1755 {
1756         struct i2c_client *client = data->client;
1757
1758         mutex_lock(&data->lock);
1759         if (client)
1760                 w83781d_write_value_i2c(data, reg, value);
1761         else
1762                 w83781d_write_value_isa(data, reg, value);
1763         mutex_unlock(&data->lock);
1764         return 0;
1765 }
1766
1767 static int __devinit
1768 w83781d_isa_probe(struct platform_device *pdev)
1769 {
1770         int err, reg;
1771         struct w83781d_data *data;
1772         struct resource *res;
1773
1774         /* Reserve the ISA region */
1775         res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1776         if (!devm_request_region(&pdev->dev,
1777                                  res->start + W83781D_ADDR_REG_OFFSET, 2,
1778                                  "w83781d"))
1779                 return -EBUSY;
1780
1781         data = devm_kzalloc(&pdev->dev, sizeof(struct w83781d_data),
1782                             GFP_KERNEL);
1783         if (!data)
1784                 return -ENOMEM;
1785
1786         mutex_init(&data->lock);
1787         data->isa_addr = res->start;
1788         platform_set_drvdata(pdev, data);
1789
1790         reg = w83781d_read_value(data, W83781D_REG_WCHIPID);
1791         switch (reg) {
1792         case 0x30:
1793                 data->type = w83782d;
1794                 data->name = "w83782d";
1795                 break;
1796         default:
1797                 data->type = w83781d;
1798                 data->name = "w83781d";
1799         }
1800
1801         /* Initialize the W83781D chip */
1802         w83781d_init_device(&pdev->dev);
1803
1804         /* Register sysfs hooks */
1805         err = w83781d_create_files(&pdev->dev, data->type, 1);
1806         if (err)
1807                 goto exit_remove_files;
1808
1809         err = device_create_file(&pdev->dev, &dev_attr_name);
1810         if (err)
1811                 goto exit_remove_files;
1812
1813         data->hwmon_dev = hwmon_device_register(&pdev->dev);
1814         if (IS_ERR(data->hwmon_dev)) {
1815                 err = PTR_ERR(data->hwmon_dev);
1816                 goto exit_remove_files;
1817         }
1818
1819         return 0;
1820
1821  exit_remove_files:
1822         w83781d_remove_files(&pdev->dev);
1823         device_remove_file(&pdev->dev, &dev_attr_name);
1824         return err;
1825 }
1826
1827 static int __devexit
1828 w83781d_isa_remove(struct platform_device *pdev)
1829 {
1830         struct w83781d_data *data = platform_get_drvdata(pdev);
1831
1832         hwmon_device_unregister(data->hwmon_dev);
1833         w83781d_remove_files(&pdev->dev);
1834         device_remove_file(&pdev->dev, &dev_attr_name);
1835
1836         return 0;
1837 }
1838
1839 static struct platform_driver w83781d_isa_driver = {
1840         .driver = {
1841                 .owner = THIS_MODULE,
1842                 .name = "w83781d",
1843         },
1844         .probe = w83781d_isa_probe,
1845         .remove = __devexit_p(w83781d_isa_remove),
1846 };
1847
1848 /* return 1 if a supported chip is found, 0 otherwise */
1849 static int __init
1850 w83781d_isa_found(unsigned short address)
1851 {
1852         int val, save, found = 0;
1853         int port;
1854
1855         /*
1856          * Some boards declare base+0 to base+7 as a PNP device, some base+4
1857          * to base+7 and some base+5 to base+6. So we better request each port
1858          * individually for the probing phase.
1859          */
1860         for (port = address; port < address + W83781D_EXTENT; port++) {
1861                 if (!request_region(port, 1, "w83781d")) {
1862                         pr_debug("Failed to request port 0x%x\n", port);
1863                         goto release;
1864                 }
1865         }
1866
1867 #define REALLY_SLOW_IO
1868         /*
1869          * We need the timeouts for at least some W83781D-like
1870          * chips. But only if we read 'undefined' registers.
1871          */
1872         val = inb_p(address + 1);
1873         if (inb_p(address + 2) != val
1874          || inb_p(address + 3) != val
1875          || inb_p(address + 7) != val) {
1876                 pr_debug("Detection failed at step %d\n", 1);
1877                 goto release;
1878         }
1879 #undef REALLY_SLOW_IO
1880
1881         /*
1882          * We should be able to change the 7 LSB of the address port. The
1883          * MSB (busy flag) should be clear initially, set after the write.
1884          */
1885         save = inb_p(address + W83781D_ADDR_REG_OFFSET);
1886         if (save & 0x80) {
1887                 pr_debug("Detection failed at step %d\n", 2);
1888                 goto release;
1889         }
1890         val = ~save & 0x7f;
1891         outb_p(val, address + W83781D_ADDR_REG_OFFSET);
1892         if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
1893                 outb_p(save, address + W83781D_ADDR_REG_OFFSET);
1894                 pr_debug("Detection failed at step %d\n", 3);
1895                 goto release;
1896         }
1897
1898         /* We found a device, now see if it could be a W83781D */
1899         outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
1900         val = inb_p(address + W83781D_DATA_REG_OFFSET);
1901         if (val & 0x80) {
1902                 pr_debug("Detection failed at step %d\n", 4);
1903                 goto release;
1904         }
1905         outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
1906         save = inb_p(address + W83781D_DATA_REG_OFFSET);
1907         outb_p(W83781D_REG_CHIPMAN, address + W83781D_ADDR_REG_OFFSET);
1908         val = inb_p(address + W83781D_DATA_REG_OFFSET);
1909         if ((!(save & 0x80) && (val != 0xa3))
1910          || ((save & 0x80) && (val != 0x5c))) {
1911                 pr_debug("Detection failed at step %d\n", 5);
1912                 goto release;
1913         }
1914         outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
1915         val = inb_p(address + W83781D_DATA_REG_OFFSET);
1916         if (val < 0x03 || val > 0x77) { /* Not a valid I2C address */
1917                 pr_debug("Detection failed at step %d\n", 6);
1918                 goto release;
1919         }
1920
1921         /* The busy flag should be clear again */
1922         if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
1923                 pr_debug("Detection failed at step %d\n", 7);
1924                 goto release;
1925         }
1926
1927         /* Determine the chip type */
1928         outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
1929         save = inb_p(address + W83781D_DATA_REG_OFFSET);
1930         outb_p(save & 0xf8, address + W83781D_DATA_REG_OFFSET);
1931         outb_p(W83781D_REG_WCHIPID, address + W83781D_ADDR_REG_OFFSET);
1932         val = inb_p(address + W83781D_DATA_REG_OFFSET);
1933         if ((val & 0xfe) == 0x10        /* W83781D */
1934          || val == 0x30)                /* W83782D */
1935                 found = 1;
1936
1937         if (found)
1938                 pr_info("Found a %s chip at %#x\n",
1939                         val == 0x30 ? "W83782D" : "W83781D", (int)address);
1940
1941  release:
1942         for (port--; port >= address; port--)
1943                 release_region(port, 1);
1944         return found;
1945 }
1946
1947 static int __init
1948 w83781d_isa_device_add(unsigned short address)
1949 {
1950         struct resource res = {
1951                 .start  = address,
1952                 .end    = address + W83781D_EXTENT - 1,
1953                 .name   = "w83781d",
1954                 .flags  = IORESOURCE_IO,
1955         };
1956         int err;
1957
1958         pdev = platform_device_alloc("w83781d", address);
1959         if (!pdev) {
1960                 err = -ENOMEM;
1961                 pr_err("Device allocation failed\n");
1962                 goto exit;
1963         }
1964
1965         err = platform_device_add_resources(pdev, &res, 1);
1966         if (err) {
1967                 pr_err("Device resource addition failed (%d)\n", err);
1968                 goto exit_device_put;
1969         }
1970
1971         err = platform_device_add(pdev);
1972         if (err) {
1973                 pr_err("Device addition failed (%d)\n", err);
1974                 goto exit_device_put;
1975         }
1976
1977         return 0;
1978
1979  exit_device_put:
1980         platform_device_put(pdev);
1981  exit:
1982         pdev = NULL;
1983         return err;
1984 }
1985
1986 static int __init
1987 w83781d_isa_register(void)
1988 {
1989         int res;
1990
1991         if (w83781d_isa_found(isa_address)) {
1992                 res = platform_driver_register(&w83781d_isa_driver);
1993                 if (res)
1994                         goto exit;
1995
1996                 /* Sets global pdev as a side effect */
1997                 res = w83781d_isa_device_add(isa_address);
1998                 if (res)
1999                         goto exit_unreg_isa_driver;
2000         }
2001
2002         return 0;
2003
2004 exit_unreg_isa_driver:
2005         platform_driver_unregister(&w83781d_isa_driver);
2006 exit:
2007         return res;
2008 }
2009
2010 static void
2011 w83781d_isa_unregister(void)
2012 {
2013         if (pdev) {
2014                 platform_device_unregister(pdev);
2015                 platform_driver_unregister(&w83781d_isa_driver);
2016         }
2017 }
2018 #else /* !CONFIG_ISA */
2019
2020 static struct w83781d_data *w83781d_data_if_isa(void)
2021 {
2022         return NULL;
2023 }
2024
2025 static int
2026 w83781d_alias_detect(struct i2c_client *client, u8 chipid)
2027 {
2028         return 0;
2029 }
2030
2031 static int
2032 w83781d_read_value(struct w83781d_data *data, u16 reg)
2033 {
2034         int res;
2035
2036         mutex_lock(&data->lock);
2037         res = w83781d_read_value_i2c(data, reg);
2038         mutex_unlock(&data->lock);
2039
2040         return res;
2041 }
2042
2043 static int
2044 w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
2045 {
2046         mutex_lock(&data->lock);
2047         w83781d_write_value_i2c(data, reg, value);
2048         mutex_unlock(&data->lock);
2049
2050         return 0;
2051 }
2052
2053 static int __init
2054 w83781d_isa_register(void)
2055 {
2056         return 0;
2057 }
2058
2059 static void
2060 w83781d_isa_unregister(void)
2061 {
2062 }
2063 #endif /* CONFIG_ISA */
2064
2065 static int __init
2066 sensors_w83781d_init(void)
2067 {
2068         int res;
2069
2070         /*
2071          * We register the ISA device first, so that we can skip the
2072          * registration of an I2C interface to the same device.
2073          */
2074         res = w83781d_isa_register();
2075         if (res)
2076                 goto exit;
2077
2078         res = i2c_add_driver(&w83781d_driver);
2079         if (res)
2080                 goto exit_unreg_isa;
2081
2082         return 0;
2083
2084  exit_unreg_isa:
2085         w83781d_isa_unregister();
2086  exit:
2087         return res;
2088 }
2089
2090 static void __exit
2091 sensors_w83781d_exit(void)
2092 {
2093         w83781d_isa_unregister();
2094         i2c_del_driver(&w83781d_driver);
2095 }
2096
2097 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
2098               "Philip Edelbrock <phil@netroedge.com>, "
2099               "and Mark Studebaker <mdsxyz123@yahoo.com>");
2100 MODULE_DESCRIPTION("W83781D driver");
2101 MODULE_LICENSE("GPL");
2102
2103 module_init(sensors_w83781d_init);
2104 module_exit(sensors_w83781d_exit);