]> rtime.felk.cvut.cz Git - sysless.git/history - board
LMC1: Added port pin style definition for auxual TLL I/O pins.
[sysless.git] / board /
2011-04-26 Pavel PisaLMC1: Added port pin style definition for auxual TLL...
2011-03-21 Pavel PisaFix build of h8300 hi_cpu2 board support - not tested.
2011-03-16 Vladimir BurianAdded openmsp430 virtex2 board.
2011-03-16 Michal Sojkah8300: Port the newest bloader to h8eurobot board
2011-03-16 Michal Sojkah8300: Yet another update of bloader
2011-03-16 Michal Sojkah8300: Update h8canusb ld scripts to work with updated...
2011-03-16 Michal Sojkah8300: Make bloader work with ELF toolchain
2011-03-01 Pavel PisaLPC17xx: corrected mistake in ADC pin configuration.
2011-03-01 Pavel PisaLPC17xx: define ADC pins in HAL GPIO style as well.
2011-01-25 Pavel Pisalpc17xx - optimize for size and discard unused function...
2011-01-23 Pavel PisaSeparate ldscript for LPC1766 to reflect limited (256kB...
2011-01-18 Pavel PisaIRC Mark pin cannot generate IRQ on Port 1, use MCPWM...
2010-12-21 Pavel PisaDefine SSP1 pins connection on LMC1 board and SSP1...
2010-12-21 Pavel PisaLMC1 board LEDs declared by PORT_PIN macro.
2010-12-10 Petr Smolikldscripts for lpc1758
2010-11-23 Pavel PisaSSP0 pin definitions for LMC board updated to match...
2010-11-17 Michal SojkaMake arm/oc8n compilable
2010-11-17 Tran Duy KhanhBuild framework for the AT91SAM7 architecture
2010-11-16 Michal Sojkah8canusb updated to the new toolchain - bootstrap doesn...
2010-11-16 Michal SojkaLeaf Makefiles updated to work with dash without warnings
2010-11-16 Michal SojkaThe h8eurobot board ldscripts modified to allow ELF...
2010-11-16 Pavel PisaThe hi_cpu2 board ldscripts modified to allow ELF build.
2010-11-16 Michal SojkaAdded new HW revision for h8eurobot board
2010-11-16 Michal SojkaAdded xtal definitions for h8mirosot.
2010-11-16 Michal SojkaMirosot board can be configured to different crystal...
2010-11-16 Michal Sojkah8eurobot don't use prefix_dir.
2010-11-16 Michal Sojkahwinit is now working for h8eurobot board.
2010-11-16 Michal SojkaFixed clock settings for h8eurobot.
2010-11-16 Michal SojkaOther parts of h8eurobot suport.
2010-11-16 Michal SojkaAdded priliminary support for h8eurobot board.
2010-11-16 Michal Sojkah8heli: gdbstub commented out
2010-11-16 Michal Sojkah8heli: mycan.c updated to the actual header files...
2010-11-16 otaAdded helicopter application and customizations.
2010-11-16 Michal SojkaDefault SCI channel is specified in sysstem_def.h....
2010-11-16 Pavel PisaUpdates for HI_CPU2 board.
2010-11-16 Pavel PisaIntroduction of HI_CPU2 board support.
2010-11-16 Michal SojkaMirosot: update of config.
2010-11-16 Petr KovacikMirosot: changed frequency of a quartz.
2010-11-16 Nguyen HoangAdded CFLAGS for compilation of bluetooth stuff for...
2010-11-16 Michal SojkaMirosot: config moved to new (default) location
2010-11-16 Pavel PisaThe h8s2638h.h header file included now indirectly...
2010-11-16 Petr KovacikMirosot: changed VER_ID in system_def.h, added board...
2010-11-16 Petr KovacikMirosot: changed default SCI channel.
2010-11-16 Stanislav MarekCorrected default serial port for EDK2638.
2010-11-16 Pavel PisaAdded minimal support for JT_USB1 board.
2010-11-16 Pavel PisaThe correct, but not functional solution for board...
2010-11-16 Pavel PisaDecreased BPS for initial ROM bootstrap and added load...
2010-11-16 Michal SojkaAdded h8heli board
2010-11-16 Pavel PisaSources updated to ensure, that shadow store contains...
2010-11-16 Stanislav MarekEDK2638 shadow registers and deb_led_out correction.
2010-11-16 Stanislav MarekEDK2638 LED macro upgrade.
2010-11-16 Stanislav MarekMinor hardware setup correction - TxD0/1 has to be...
2010-11-16 Michal Sojkahwinit files renamed to bspXXX.
2010-11-16 Pavel PisaSome lost part of previous patch for h8canusb board.
2010-11-16 Pavel PisaThe shadow registers definition moved to separate file...
2010-11-16 Stanislav MarekAdded (NOLOAD) attribute to ".shadreg" section and...
2010-11-16 Stanislav MarekHuge rearrangement of board setup function.
2010-11-16 Stanislav MarekOriginal dead code elimination pass 1.
2010-11-16 Stanislav MarekMirosot: Flash linker script fixed for use without...
2010-11-16 Stanislav MarekEDK2638 RAM start addres corrected
2010-11-16 Stanislav MarekLED macro upgraded for EDK2638.
2010-11-16 Pavel PisaAdded ld script to run application from Flash without...
2010-11-16 Pavel PisaSome experimentation with prolonging of PDIUSBD12 chip...
2010-11-16 Petr KovacikMirosot: printf uses SCI 1; merge of config.omk and...
2010-11-16 Michal SojkaAdded a posibility to have board specific prefix in...
2010-11-16 Stanislav MarekCorrection for EDK2638
2010-11-16 Petr KovacikMirosot board: added RUN_CMD-flash and hw independend...
2010-11-16 Petr KovacikAdded HW independednt LED macros for h8canusb board.
2010-11-16 Petr KovacikAdded ram linker script for mirosot board.
2010-11-16 Petr KovacikAdded support for H8Mirosot board.
2010-11-16 Michal SojkaFixed bad resolution of a conflict on my computer.
2010-11-16 Michal SojkaSelection of serial port used by TOHIT can be in separa...
2010-11-16 Michal SojkaSelection of serial port used by TOHIT can be in separa...
2010-11-16 Pavel PisaAdded required makefiles for EDK2638
2010-11-16 Pavel PisaPreparation for EDK2638 build
2010-11-16 Michal SojkaMake system is now more modular.
2010-11-16 Michal Sojkatohit is now compiled "natively" by OMK.
2010-11-16 Michal SojkaSetting of debugging and optimization flags moved to...
2010-11-16 Michal SojkaRenaming of variables for selecting a linker script.
2010-11-16 Michal SojkaAdded a possibility to specify which output formats...
2010-11-16 Michal SojkaConfig files are now in the board direcotry.
2010-11-16 Michal SojkaAdded hw_init for h8canusb board.
2010-11-16 Michal SojkaAdded some libraries - system_stub, drivers etc.
2010-11-16 Michal Sojkald scripts renamed to match board name. Added skeletons...
2010-11-16 Michal SojkaFixed ld scripts by adding a jump to _start.
2010-11-16 Michal SojkaAdded modification of ld scripts for proper crt0 linking.
2010-11-16 Michal SojkaFixed linking of crt0.o and added better comments in...
2010-11-16 Pavel PisaImported original H8300 support.
2010-11-16 Pavel PisaThe ELF version of bdm-load is used by default now.
2010-11-16 Pavel PisaAdded initial version of the analog axis support.
2010-11-16 Pavel PisaMinor updates to compile with GCC 4.3.
2010-11-16 Pavel PisaMake m68k-elf default toolchain.
2010-11-16 Pavel PisaMARS8 application version increased to 0.7.
2010-11-16 Pavel PisaAdded support for queued comparators (still untested).
2010-11-16 Pavel PisaAdded not so clean implementation for automatic brake...
2010-11-16 ppisaFix to lost characters on RS232 line
2010-11-16 ppisaInitial support for external mode added.
2010-11-16 ppisaPosition system operation mode used as bitmask in all...
2010-11-16 Pavel PisaThe proprietary __uXX types changed to standardized...
2010-11-16 ppisaUSB initialization added to the MARS8 application.
next