]>
rtime.felk.cvut.cz Git - pes-rpp/rpp-test-sw.git/log
Michal Sojka [Sun, 8 Sep 2019 21:31:51 +0000 (23:31 +0200)]
Update rpp-lib
* rpp-lib
1361bde7 ...
300b1934 (2):
> Increase FreeRTOS heap and use it by LwIP
> Increase stack memory of RX and TX thread
Jakub Nejedlý [Wed, 21 Aug 2019 08:09:32 +0000 (10:09 +0200)]
Add testing tool iperf
New debuging tool allows to test quality of ethernet connection. New function
works as iperf server. To test is nessesary connect from computer.
Michal Sojka [Sat, 31 Aug 2019 21:12:25 +0000 (23:12 +0200)]
Get rid of compiler warnings (variable was set but never used)
Jakub Nejedlý [Wed, 21 Aug 2019 07:56:07 +0000 (09:56 +0200)]
Add ping function to debug tools
Ping command is now useable to test ethernet conection.
Main part of code was taken from
http://www.smallerapple.com/ZhangJianfei/rt-thread/blob/
98fc1cb4cf0fd20a79f16b72fd72846c207702b5 /components/net/lwip-1.3.2/apps/ping.c
Jakub Nejedlý [Wed, 21 Aug 2019 07:42:01 +0000 (09:42 +0200)]
Change MAC address
Unification of MAC addresses over project.
Emac address is used only in this debugging tool.
During emac_test is't called rpp_init().
MAC address defined in eth.h have no efect in this test file.
Jakub Nejedlý [Wed, 21 Aug 2019 07:26:57 +0000 (09:26 +0200)]
Guard tms570_rpp-specific code with #ifdef
Due migration ethernet to common board version is
nessesary to exclude this pin setup from non-RPP
builds.
Jakub Nejedlý [Wed, 21 Aug 2019 07:18:40 +0000 (09:18 +0200)]
Enable Ethernet on all boards
Migration of Ethernet debugging tools from RPP board to all versions.
Michal Sojka updated .gitattributes to distribute the enabled commands
to EATON.
Michal Sojka [Sat, 31 Aug 2019 20:38:29 +0000 (22:38 +0200)]
Update rpp-lib
* rpp-lib
7f10feaa ...
9cba59d8 (9):
> Update LWIP
> Set MDIO initial sequence
> Change RMII comunication to MII
> Makefile.var: Whitespace fixes
> Enable ethernet interrupts for all platforms
> Add content to release
> Static IP configuration
> Touch PIN_ETHRST only on TMS570_RPP
> Enable ehternet for all platform
> Heap change
> Get rid of "last line of file ends without a newline" warning
Michal Sojka [Wed, 4 May 2016 09:36:36 +0000 (11:36 +0200)]
Update lib submodule
Fixes #1608
Michal Sojka [Tue, 3 May 2016 11:22:55 +0000 (13:22 +0200)]
candump: Fix displaying of EFF frame IDs
Michal Sojka [Tue, 3 May 2016 11:21:05 +0000 (13:21 +0200)]
candump: Do not filter messages, show them all
Fixes #1606
Michal Sojka [Tue, 3 May 2016 11:19:48 +0000 (13:19 +0200)]
candump: Ensure than controller ID is not out of range
Michal Sojka [Mon, 25 Apr 2016 15:19:27 +0000 (17:19 +0200)]
adc: Use board-dependent function for LSB-to-Volts conversion
Fixes #1605
Michal Sojka [Wed, 30 Mar 2016 12:21:17 +0000 (14:21 +0200)]
cmdproc: Make backspace work even in sterm
sterm sends chr(127) instead of backspace.
Michal Sojka [Thu, 14 Apr 2016 15:03:57 +0000 (17:03 +0200)]
Update/correct dinsetup documentation
Fixes #1577
Michal Sojka [Wed, 13 Apr 2016 15:32:51 +0000 (17:32 +0200)]
Add MOUT commands
The commands work, but the pin voltage does not change and diag signals
a fault. Probably, the pin driving EN signal is not set to 1. This needs
to be fixed later.
Fixes #1580
Michal Sojka [Wed, 13 Apr 2016 14:26:42 +0000 (16:26 +0200)]
lout: Document command output
Fixes #1581
Michal Sojka [Wed, 13 Apr 2016 14:24:40 +0000 (16:24 +0200)]
lout: Add missing "\n"
Michal Sojka [Wed, 13 Apr 2016 14:24:02 +0000 (16:24 +0200)]
lout: Fix buffer overflow
Michal Sojka [Wed, 13 Apr 2016 14:20:01 +0000 (16:20 +0200)]
Update rpp-lib submodule
Michal Sojka [Wed, 13 Apr 2016 14:16:23 +0000 (16:16 +0200)]
hout: Do not use variably sized local array
This uses dynamic allocation, which does not work and results in an
exception in libc code. Since, we don't have the libc source, I'm not sure
what is exactly the reason.
Fixes #1579
Michal Sojka [Wed, 13 Apr 2016 13:46:10 +0000 (15:46 +0200)]
Make houtpwm code and documentation match
Fixes #1578
Michal Sojka [Wed, 13 Apr 2016 12:57:55 +0000 (14:57 +0200)]
Fix buffer overflow
Michal Sojka [Tue, 27 Oct 2015 13:32:18 +0000 (14:32 +0100)]
Update lib submodule
Jan Dvořák [Mon, 19 Oct 2015 09:24:26 +0000 (11:24 +0200)]
Fixed indices in the FlexRay test procedures
Michal Sojka [Sun, 4 Oct 2015 14:36:17 +0000 (16:36 +0200)]
Update lib submodule
Michal Sojka [Sun, 4 Oct 2015 07:32:44 +0000 (09:32 +0200)]
Update lib submodule
Michal Sojka [Fri, 11 Sep 2015 14:07:25 +0000 (16:07 +0200)]
Update lib submodule
Michal Sojka [Thu, 3 Sep 2015 08:31:17 +0000 (10:31 +0200)]
Update lib submodule
Michal Sojka [Wed, 2 Sep 2015 16:38:43 +0000 (18:38 +0200)]
Update port command documentation
Michal Sojka [Wed, 2 Sep 2015 16:38:29 +0000 (18:38 +0200)]
adc: Support different number of channels depending on the target
Michal Sojka [Wed, 2 Sep 2015 08:41:49 +0000 (10:41 +0200)]
Recommend Debug build of the library with rpp-test-sw
Michal Sojka [Wed, 2 Sep 2015 05:48:57 +0000 (07:48 +0200)]
Do not issue warning about unreachable code
We keep the return statement here for the case that the function will
be modified and return will become reachable again.
Michal Sojka [Sat, 29 Aug 2015 11:21:33 +0000 (13:21 +0200)]
Support more channels for 16 bit ports
Michal Sojka [Sat, 29 Aug 2015 11:13:08 +0000 (13:13 +0200)]
Fix endianing for 16bit port channels
Michal Sojka [Sat, 29 Aug 2015 08:48:42 +0000 (10:48 +0200)]
Print SPI chip name in portlist output
Michal Sojka [Fri, 28 Aug 2015 21:41:23 +0000 (23:41 +0200)]
Update to changes in SPI API
This needs to be tested!
Michal Sojka [Fri, 28 Aug 2015 14:20:47 +0000 (16:20 +0200)]
Update lib submodule
Michal Sojka [Thu, 27 Aug 2015 17:18:21 +0000 (19:18 +0200)]
Update lib submodule
Michal Sojka [Thu, 27 Aug 2015 17:08:38 +0000 (19:08 +0200)]
Update lib submodule
Michal Sojka [Thu, 27 Aug 2015 13:12:04 +0000 (15:12 +0200)]
Update lib submodule
Michal Sojka [Thu, 27 Aug 2015 08:08:04 +0000 (10:08 +0200)]
Fix warnings
Michal Sojka [Thu, 27 Aug 2015 07:29:07 +0000 (09:29 +0200)]
Update lib submodule
Michal Sojka [Thu, 27 Aug 2015 05:32:51 +0000 (07:32 +0200)]
Update lib submodule
Michal Sojka [Thu, 27 Aug 2015 05:32:43 +0000 (07:32 +0200)]
Update OS version (include path) in CCS projects
Michal Sojka [Wed, 26 Aug 2015 20:54:41 +0000 (22:54 +0200)]
Update lib submodule
Michal Sojka [Wed, 26 Aug 2015 11:49:28 +0000 (13:49 +0200)]
Update lib submodule
Michal Horn [Wed, 19 Aug 2015 08:19:16 +0000 (10:19 +0200)]
Update lib submodule
Michal Sojka [Fri, 7 Aug 2015 10:03:33 +0000 (12:03 +0200)]
Rework portval command
- Show R/W status
- Remove support for (currently) non-existent bits-per-channel values
- Responses are always prefixed by the original command
Michal Sojka [Sun, 26 Jul 2015 21:31:19 +0000 (23:31 +0200)]
Update to the reworked gio and port in the rpp-lib
Also simplify spi_resp_transl.
Michal Horn [Wed, 22 Jul 2015 07:29:57 +0000 (09:29 +0200)]
Update library
Martin Vajnar [Thu, 30 Jul 2015 12:48:41 +0000 (14:48 +0200)]
Update library
Martin Vajnar [Thu, 30 Jul 2015 12:26:59 +0000 (14:26 +0200)]
Merge branch 'master' into personal/vajnamar/merge-fixes
Martin Vajnar [Thu, 30 Jul 2015 12:03:45 +0000 (14:03 +0200)]
Add the possibility to break echoserver running in foreground
Echoserver is capable of running in the foreground, but there was no
possibility to break it. Now it is possible by pressing any key in the RPP
terminal, followed by issuing EOF and closing the connection from the PC.
Martin Vajnar [Thu, 30 Jul 2015 11:54:58 +0000 (13:54 +0200)]
Fix echoserver's foreground mode
es_logic() requires pointer to valid thread_context, but the pointer was
only assigned properly when running echoserver as a background thread.
Now the pointer is assigned in both cases, that is for running in
background and foreground.
Martin Vajnar [Fri, 24 Jul 2015 16:35:56 +0000 (18:35 +0200)]
Update library
Martin Vajnar [Fri, 24 Jul 2015 15:33:05 +0000 (17:33 +0200)]
Compile TCP echoserver for TMS570_RPP
Martin Vajnar [Fri, 24 Jul 2015 11:34:19 +0000 (13:34 +0200)]
Merge branch 'cmd_echoserver' of git@rtime.felk.cvut.cz:rpp-test-sw into personal/vajnamar/merge-fixes
Martin Vajnar [Fri, 24 Jul 2015 11:34:04 +0000 (13:34 +0200)]
Merged Ethernet driver into library
Martin Vajnar [Fri, 24 Jul 2015 11:06:26 +0000 (13:06 +0200)]
Merge branch 'master' of git@rtime.felk.cvut.cz:rpp-test-sw into personal/vajnamar/for-master
Martin Vajnar [Thu, 23 Jul 2015 15:02:00 +0000 (17:02 +0200)]
Update library
Martin Vajnar [Thu, 23 Jul 2015 14:38:53 +0000 (16:38 +0200)]
Call rpp_init() to initialize all available peripherals
Call rpp_init() in main() to initialize all available peripherals.
Michal Sojka [Thu, 16 Jul 2015 16:44:38 +0000 (18:44 +0200)]
doc: Improve Emacs macros for editing command help texts
Michal Sojka [Wed, 15 Jul 2015 20:25:08 +0000 (22:25 +0200)]
Update library
Michal Horn [Mon, 13 Jul 2015 14:39:15 +0000 (16:39 +0200)]
Fix HDK ADC voltage conversion
Michal Horn [Mon, 13 Jul 2015 12:32:35 +0000 (14:32 +0200)]
Fix adcwatch string layout
Michal Sojka [Sat, 11 Jul 2015 18:08:39 +0000 (20:08 +0200)]
Make attribute "eaton" to match only files in current directory
Michal Sojka [Fri, 10 Jul 2015 16:42:49 +0000 (18:42 +0200)]
Setup ignored files in lib before including lib in release
Michal Sojka [Thu, 9 Jul 2015 10:59:26 +0000 (12:59 +0200)]
Update lib
Michal Sojka [Wed, 8 Jul 2015 23:40:51 +0000 (01:40 +0200)]
Update rpp-lib
Michal Sojka [Wed, 8 Jul 2015 19:41:37 +0000 (21:41 +0200)]
Include lwip in the release
Michal Sojka [Wed, 8 Jul 2015 19:21:25 +0000 (21:21 +0200)]
Include Makefile.var in the release
Otherwise the release cannot be compiled.
Michal Sojka [Wed, 8 Jul 2015 17:34:22 +0000 (19:34 +0200)]
Add eaton attribute to files distributed to Eaton
Michal Sojka [Wed, 8 Jul 2015 17:13:10 +0000 (19:13 +0200)]
Generate documentation correctly depending on the selected target
Michal Sojka [Wed, 8 Jul 2015 15:48:14 +0000 (17:48 +0200)]
Merge branches 'master' and 'rm48/master'
Conflicts:
Makefile
rpp-lib
rpp-test-sw/.ccsproject
rpp-test-sw/.cproject
rpp-test-sw/commands/_tms570_rpp/cmd.c
rpp-test-sw/commands/_tms570_rpp/main.c
rpp-test-sw/commands/cmd_fr_basic_test.c
Michal Sojka [Sat, 4 Jul 2015 15:50:51 +0000 (17:50 +0200)]
Makefile: Always include release rules
Conditional inclusion broke release procedure of rpp-simulink.
Michal Sojka [Sat, 4 Jul 2015 15:33:37 +0000 (17:33 +0200)]
Makefile: Rework release target
Michal Sojka [Sat, 4 Jul 2015 12:43:44 +0000 (14:43 +0200)]
Makefile: Allow building and releasing for multiple targets
Michal Sojka [Sat, 4 Jul 2015 12:41:09 +0000 (14:41 +0200)]
Fix compile error for new targets
Michal Sojka [Fri, 3 Jul 2015 15:03:22 +0000 (17:03 +0200)]
Update rpp-lib
Michal Sojka [Fri, 3 Jul 2015 14:28:15 +0000 (16:28 +0200)]
One more rpp-lib update
Michal Sojka [Fri, 3 Jul 2015 14:25:30 +0000 (16:25 +0200)]
Update rpp-lib submodules
Michal Horn [Wed, 24 Jun 2015 15:55:42 +0000 (17:55 +0200)]
Modify flexray commands to reflect changes in RPP library
Michal Sojka [Thu, 30 Apr 2015 13:25:47 +0000 (15:25 +0200)]
Fix clean target
Michal Sojka [Wed, 29 Apr 2015 15:54:19 +0000 (17:54 +0200)]
Use debug build of library in the release package
This fixes error in release target of rpp-simulink.
Michal Horn [Wed, 29 Apr 2015 15:24:00 +0000 (17:24 +0200)]
Library update
Michal Horn [Wed, 29 Apr 2015 15:23:17 +0000 (17:23 +0200)]
Add .out suffix to generated binary
Michal Horn [Wed, 29 Apr 2015 13:15:53 +0000 (15:15 +0200)]
Library update
Michal Sojka [Wed, 29 Apr 2015 12:00:33 +0000 (14:00 +0200)]
Update lib
Michal Sojka [Wed, 29 Apr 2015 11:12:39 +0000 (13:12 +0200)]
Update rpp-lib
Michal Sojka [Wed, 29 Apr 2015 09:46:11 +0000 (11:46 +0200)]
Add missing files to release tarball
Also, release target is simplified and made less error prone, by not
copying library files from worktree, but by using 'git archive'.
Michal Sojka [Wed, 29 Apr 2015 07:40:32 +0000 (09:40 +0200)]
Remove target specific stuff from doc build
Later we will need to include ../Makefile.inc (or similar) to get list of
commands.
Michal Sojka [Wed, 29 Apr 2015 05:43:17 +0000 (07:43 +0200)]
Fix make release
Michal Sojka [Tue, 28 Apr 2015 22:37:32 +0000 (00:37 +0200)]
Add dependency on rpp-lib to CCS project
This ensures that rpp-lib is built before rpp-test-sw (which is useful
at least for buildbot)
Michal Sojka [Tue, 28 Apr 2015 22:29:52 +0000 (00:29 +0200)]
Rename Makefile to GNUmakefile
Having Makefile in build directory confuses CCS and it generates their
own Makefiles even when it is configured to not generate them.
Michal Sojka [Tue, 28 Apr 2015 22:06:12 +0000 (00:06 +0200)]
Update CCS project to somehow work
Michal Sojka [Tue, 28 Apr 2015 21:48:26 +0000 (23:48 +0200)]
Compile with Makefile instead of CSS
Also remove target specific compies. The differences are not so big to
deserve that. We will probably use another approach to merge tms570_rpp
target.
Michal Sojka [Tue, 28 Apr 2015 20:21:00 +0000 (22:21 +0200)]
Update Makefile so that Eclipse does not blow up the buildbot server
Without this, it seams that Eclipse was somehow invoked recursively and eat
up the whole memory.
Michal Horn [Wed, 22 Apr 2015 18:43:13 +0000 (20:43 +0200)]
Library update
Michal Horn [Wed, 22 Apr 2015 18:42:08 +0000 (20:42 +0200)]
Exclude TMS570 project in CCS RM48 project