- Linux CAN Driver (LinCAN) version 0.3.2
+ Linux CAN Driver (LinCAN) version 0.3.4
Pavel Pisa <pisa@cmp.felk.cvut.cz>
OCERA team member <http://www.ocera.org>
Real-time Systems Laboratory <http://rtlab.felk.cvut.cz/>
kernel compatibility. Support for MX1_DIS1 extension
board for PiMX1 ARM based BCC.
-
+lincan-0.3.3 Some more fixes of SJA1000 buss-of recovery,
+(May 2006) i82527 IRQ stuck problem fixed (reported by Terence Soh),
+ tested up to 2.6.17 (rc4). Minimal chip info in /proc/can.
+ Support for NSI CAN PCI contributed by Eric Pennamen.
+
+lincan-0.3.4 Some more fixes of SJA1000 buss-of recovery,
+(March 2009) Many enhancements and fixes. Tested up to 2.6.28 Linux kernel.
+
The actual version of driver have been latest tested it with
- PC104 Advantech PCM3680 dual channel board on 2.4 RT-Linux enabled kernel
- PiKRON ISA card on 2.4.and 2.6 Linux kernels
Web access into CVS
- http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/ocera/ocera/components/comm/can/lincan/
+ http://ocera.cvs.sourceforge.net/cgi-bin/viewcvs.cgi/ocera/ocera/components/comm/can/lincan/
Experimental directory at maintainer's (Pavel Pisa's) pages
---------------------------------------------------------------------------
Obtaining CVS sources of the CAN components only
---------------------------------------------------------------------------
- cvs -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/ocera login
- cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/ocera co
+ cvs -d:pserver:anonymous@ocera.cvs.sourceforge.net:/cvsroot/ocera login
+ cvs -z3 -d:pserver:anonymous@ocera.cvs.sourceforge.net:/cvsroot/ocera co
ocera/components/comm/can
---------------------------------------------------------------------------
- pcican-s, for the PCIcan-Q PCI card by KVASER (1x SJA1000)
- smartcan for i82527 based card with indexed access
- nsican, for the CAN104 PC/104 card by NSI
+- nsicanpci, for NSI CAN PCI card (2xi82527)
- cc104, for the CAN104 PC/104 card by Contemporary Controls
- aim104, for the AIM104CAN PC/104 card by Arcom Control Systems
- pc-i03, for the PC-I03 ISA card by IXXAT
- pcm3680, for the PCM-3680 PC/104 card by Advantech
- m437, for the M436 PC/104 card by SECO
- bfadcan for sja1000 CAN embedded card made by BFAD GmbH
-- pikronisa for ISA memory mapped sja1000 CAN card made by PiKRON Ltd.
+- gensja1000io for many sja1000 I/O mapped cards (PCAN-PC/104 for example).
+- gensja1000mm for ISA memory mapped sja1000 CAN cards
+ (for pikronisa card used by PiKRON Ltd. the clockfreq=24000 has to be specified)
- pimx1 for MX1_DIS1 extension board for PiMX1 ARM based BCC
- msmcan for MICROSPACE IO space indexed i82527
- unican for Unicontrols PCAN card
- tscan1 for Technologic Systems' TS-CAN1 single SJA1000 based board
- ts7kv for Technologic Systems' TS-7KV Multi-function board with SJA1000
both these cards require CONFIG_OC_LINCAN_CARD_tscan1=y
+- pcan_pci for PEAK System PCAN-PCI single, double or quad SJA1000 based board
+- esdpci200 for the CAN/PCI-200 card by ESD Electronics
+- esdpci266 for the ESD PCI/PMC 266 card by ESD Electronics
- template, for yet unsupported hardware (you need to edit src/template.c)
- virtual, CAN channel for testing of software and driver without CAN hardware
- extended=[1|0], configures the driver to use extended message format.
- pelican=[1|0], configures the driver to set the CAN chips into pelican mode.
- baudrate=<nr>, sets the baudrate of the device(s)
-- clock_freq=<nr>, the frequency of the CAN quartz
+- clockfreq=<nr>, the frequency of the CAN quartz
- stdmask=<nr>, sets the standard mask of the device
- extmask=<nr>, sets the extended mask of the device
- mo15mask=<nr>, sets the mask for message object 15 (i82527 only)