LinCAN sources go through big white-space cleanup.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>

diff --git a/lincan/include/aim104.h b/lincan/include/aim104.h
index c8cf9af3cf56b13218b319ebc4a7527f012d3265..3abc3b1d45a99d511acc9f2b409fd22fb4491591 100644 (file)
--- a/lincan/include/aim104.h
+++ b/lincan/include/aim104.h
@@ -34,7 +34,7 @@
 
 int aim104_request_io(struct candevice_t *candev);
 int aim104_release_io(struct candevice_t *candev);
-int aim104_reset(struct candevice_t *candev); 
+int aim104_reset(struct candevice_t *candev);
 int aim104_init_hw_data(struct candevice_t *candev);
 int aim104_init_chip_data(struct candevice_t *candev, int chipnr);
 int aim104_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/c_can.h b/lincan/include/c_can.h
index ab91541124225fd0e80c69ca34c9d3f047f155c0..2e22c68a0e5f64364a43f707888821999f7daf4d 100644 (file)
--- a/lincan/include/c_can.h
+++ b/lincan/include/c_can.h
@@ -35,7 +35,7 @@
 /* Publication of enhanced or derived LinCAN files is required although.  */
 /**************************************************************************/
 
-/* 
+/*
  * optimized inline version, may it be, that it can be too fast for the chip
  */
 extern inline void c_can_write_reg_w(const struct canchip_t *pchip, u16 data, unsigned reg)

diff --git a/lincan/include/can.h b/lincan/include/can.h
index 0d450c334a72628f3e029b0fbebba0eb46e7580d..c758e5e8cff60d8ba293a816a6600e6b5c8b50f7 100644 (file)
--- a/lincan/include/can.h
+++ b/lincan/include/can.h
@@ -63,12 +63,12 @@ typedef unsigned long bittiming_t;
 typedef unsigned short channel_t;
 
 /**
- * struct can_baudparams_t - datatype for calling CONF_BAUDPARAMS IOCTL 
+ * struct can_baudparams_t - datatype for calling CONF_BAUDPARAMS IOCTL
  * @flags: reserved for additional flags for chip configuration, should be written -1 or 0
  * @baudrate: baud rate in Hz
  * @sjw: synchronization jump width (0-3) prescaled clock cycles
  * @sampl_pt: sample point in % (0-100) sets (TSEG1+1)/(TSEG1+TSEG2+2) ratio
- * 
+ *
  * The structure is used to configure new set of parameters into CAN controller chip.
  * If default value of some field should be preserved, fill field by value -1.
  */

diff --git a/lincan/include/can_queue.h b/lincan/include/can_queue.h
index bf9486d01ca79769f8776db835f37d40591a1fd2..a600b80b313fb794859811a0749da3a5e211ba14 100644 (file)
--- a/lincan/include/can_queue.h
+++ b/lincan/include/can_queue.h
@@ -39,7 +39,7 @@
 #include "./can_sysdep.h"
 
 /**
- * struct canque_slot_t - one CAN message slot in the CAN FIFO queue 
+ * struct canque_slot_t - one CAN message slot in the CAN FIFO queue
  * @next: pointer to the next/younger slot
  * @slot_flags: space for flags and optional command describing action
  *     associated with slot data
@@ -60,9 +60,9 @@
  * @fifo_flags: this field holds global flags describing state of the FIFO.
  *     %CAN_FIFOF_ERROR is set when some error condition occurs.
  *     %CAN_FIFOF_ERR2BLOCK defines, that error should lead to the FIFO block state.
- *     %CAN_FIFOF_BLOCK state blocks insertion of the next messages. 
- *     %CAN_FIFOF_OVERRUN attempt to acquire new slot, when FIFO is full. 
- *     %CAN_FIFOF_FULL indicates FIFO full state. 
+ *     %CAN_FIFOF_BLOCK state blocks insertion of the next messages.
+ *     %CAN_FIFOF_OVERRUN attempt to acquire new slot, when FIFO is full.
+ *     %CAN_FIFOF_FULL indicates FIFO full state.
  *     %CAN_FIFOF_EMPTY indicates no allocated slot in the FIFO.
  *     %CAN_FIFOF_DEAD condition indication. Used when FIFO is beeing destroyed.
  * @error_code: futher description of error condition
@@ -74,7 +74,7 @@
  * @fifo_lock: the lock to ensure atomicity of slot manipulation operations.
  * @slotsnr:  number of allocated slots
  *
- * This structure represents CAN FIFO queue. It is implemented as 
+ * This structure represents CAN FIFO queue. It is implemented as
  * a single linked list of slots prepared for processing. The empty slots
  * are stored in single linked list (@flist).
  */
@@ -130,7 +130,7 @@ struct canque_fifo_t {
 
 
 /**
- * canque_fifo_get_inslot - allocate slot for the input of one CAN message 
+ * canque_fifo_get_inslot - allocate slot for the input of one CAN message
  * @fifo: pointer to the FIFO structure
  * @slotp: pointer to location to store pointer to the allocated slot.
  * @cmd: optional command associated with allocated slot.
@@ -322,7 +322,7 @@ struct canchip_t;
  * @pending_inops: bitmask of pending operations
  * @pending_outops: bitmask of pending operations
  *
- * This structure represents one direction connection from messages source 
+ * This structure represents one direction connection from messages source
  * (@inends) to message consumer (@outends) fifo ends hub. The edge contains
  * &struct canque_fifo_t for message fifo implementation.
  */
@@ -349,7 +349,7 @@ struct canque_edge_t {
  * struct canque_ends_t - CAN message delivery subsystem graph vertex (FIFO ends)
  * @ends_flags: this field holds flags describing state of the ENDS structure.
  * @active: the array of the lists of active edges directed to the ends structure
- *     with ready messages. The array is indexed by the edges priorities. 
+ *     with ready messages. The array is indexed by the edges priorities.
  * @idle: the list of the edges directed to the ends structure with empty FIFOs.
  * @inlist: the list of outgoing edges input sides.
  * @outlist: the list of all incoming edges output sides. Each of there edges
@@ -357,7 +357,7 @@ struct canque_edge_t {
  * @ends_lock: the lock synchronizing operations between threads accessing
  *     same ends structure.
  * @notify: pointer to notify procedure. The next state changes are notified.
- *     %CANQUEUE_NOTIFY_EMPTY (out->in call) - all slots are processed by FIFO out side. 
+ *     %CANQUEUE_NOTIFY_EMPTY (out->in call) - all slots are processed by FIFO out side.
  *     %CANQUEUE_NOTIFY_SPACE (out->in call) - full state negated => there is space for new message.
  *     %CANQUEUE_NOTIFY_PROC  (in->out call) - empty state negated => out side is requested to process slots.
  *     %CANQUEUE_NOTIFY_NOUSR (both) - notify, that the last user has released the edge usage
@@ -517,11 +517,11 @@ unsigned int canque_filtid2internal(unsigned long id, int filtflags)
 
 int canque_get_inslot(struct canque_ends_t *qends,
        struct canque_edge_t **qedgep, struct canque_slot_t **slotp, int cmd);
-       
+
 int canque_get_inslot4id(struct canque_ends_t *qends,
        struct canque_edge_t **qedgep, struct canque_slot_t **slotp,
        int cmd, unsigned long id, int prio);
-       
+
 int canque_put_inslot(struct canque_ends_t *qends,
        struct canque_edge_t *qedge, struct canque_slot_t *slot);
 
@@ -541,7 +541,7 @@ int canque_again_outslot(struct canque_ends_t *qends,
 
 int canque_set_filt(struct canque_edge_t *qedge,
        unsigned long filtid, unsigned long filtmask, int flags);
-       
+
 int canque_flush(struct canque_edge_t *qedge);
 
 int canqueue_disconnect_edge(struct canque_edge_t *qedge);
@@ -589,7 +589,7 @@ can_spin_irqflags_t canque_edge_lock_both_ends(struct canque_ends_t *inends, str
                can_spin_lock_irqsave(&outends->ends_lock, flags);
                if(outends!=inends) can_spin_lock(&inends->ends_lock);
        }
-       return flags;   
+       return flags;
 }
 
 static inline
@@ -609,11 +609,11 @@ void __canque_edge_decref_body(struct canque_edge_t *edge)
        int dead_fl=0;
        struct canque_ends_t *inends=edge->inends;
        struct canque_ends_t *outends=edge->outends;
-       
+
        flags=canque_edge_lock_both_ends(inends, outends);
        if(atomic_dec_and_test(&edge->edge_used)) {
                dead_fl=!canque_fifo_test_and_set_fl(&edge->fifo,DEAD);
-               /* Because of former evolution of edge references 
+               /* Because of former evolution of edge references
                   management notify of CANQUEUE_NOTIFY_NOUSR could
                   be moved to canque_edge_do_dead :-) */
        }
@@ -640,7 +640,7 @@ static inline
 void canque_edge_decref(struct canque_edge_t *edge)
 {
        int x, y;
-       
+
         x = atomic_read(&edge->edge_used);
         do{
                if(x<=1)
@@ -663,7 +663,7 @@ struct canque_edge_t *canque_first_inedge(struct canque_ends_t *qends)
        can_spin_irqflags_t flags;
        struct list_head *entry;
        struct canque_edge_t *edge;
-       
+
        can_spin_lock_irqsave(&qends->ends_lock, flags);
        entry=qends->inlist.next;
     skip_dead:
@@ -688,7 +688,7 @@ struct canque_edge_t *canque_next_inedge(struct canque_ends_t *qends, struct can
        can_spin_irqflags_t flags;
        struct list_head *entry;
        struct canque_edge_t *next;
-       
+
        can_spin_lock_irqsave(&qends->ends_lock, flags);
        entry=edge->inpeers.next;
     skip_dead:
@@ -716,7 +716,7 @@ struct canque_edge_t *canque_first_outedge(struct canque_ends_t *qends)
        can_spin_irqflags_t flags;
        struct list_head *entry;
        struct canque_edge_t *edge;
-       
+
        can_spin_lock_irqsave(&qends->ends_lock, flags);
        entry=qends->outlist.next;
     skip_dead:
@@ -741,7 +741,7 @@ struct canque_edge_t *canque_next_outedge(struct canque_ends_t *qends, struct ca
        can_spin_irqflags_t flags;
        struct list_head *entry;
        struct canque_edge_t *next;
-       
+
        can_spin_lock_irqsave(&qends->ends_lock, flags);
        entry=edge->outpeers.next;
     skip_dead:

diff --git a/lincan/include/canmsg.h b/lincan/include/canmsg.h
index 063e4ed155212605d77c046d36c7e3c05bd9f145..faf846e0aaca52cec17b56ed756bf8f1016bc9cd 100644 (file)
--- a/lincan/include/canmsg.h
+++ b/lincan/include/canmsg.h
@@ -51,10 +51,10 @@
 extern "C" {
 #endif
 
-/* 
+/*
  * CAN_MSG_VERSION_2 enables new canmsg_t layout compatible with
  * can4linux project from http://www.port.de/
- * 
+ *
  */
 #define CAN_MSG_VERSION_2
 
@@ -71,7 +71,7 @@ typedef unsigned long canmsg_id_t;
  * struct canmsg_t - structure representing CAN message
  * @flags:  message flags
  *      %MSG_RTR .. message is Remote Transmission Request,
- *     %MSG_EXT .. message with extended ID, 
+ *     %MSG_EXT .. message with extended ID,
  *      %MSG_OVR .. indication of queue overflow condition,
  *     %MSG_LOCAL .. message originates from this node.
  * @cob:    communication object number (not used)
@@ -112,7 +112,7 @@ typedef struct canmsg_t canmsg_t;
  * struct canfilt_t - structure for acceptance filter setup
  * @flags:  message flags
  *      %MSG_RTR .. message is Remote Transmission Request,
- *     %MSG_EXT .. message with extended ID, 
+ *     %MSG_EXT .. message with extended ID,
  *      %MSG_OVR .. indication of queue overflow condition,
  *     %MSG_LOCAL .. message originates from this node.
  *     there are corresponding mask bits

diff --git a/lincan/include/cc_can104.h b/lincan/include/cc_can104.h
index ad7d8a47db64eaf2ad5804b9f486e0f1ca717c26..b2ec8a6819c3983b6319e11300dcda3585f9d89d 100644 (file)
--- a/lincan/include/cc_can104.h
+++ b/lincan/include/cc_can104.h
@@ -34,7 +34,7 @@
 
 int cc104_request_io(struct candevice_t *candev);
 int cc104_release_io(struct candevice_t *candev);
-int cc104_reset(struct candevice_t *candev); 
+int cc104_reset(struct candevice_t *candev);
 int cc104_init_hw_data(struct candevice_t *candev);
 int cc104_init_chip_data(struct candevice_t *candev, int chipnr);
 int cc104_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/eb8245.h b/lincan/include/eb8245.h
index fcf28f3bb6fdffa47237a4c784a1bd5213e9f0fe..965fdaf1e6bd5788b204344a1c2094fd12ce3d89 100644 (file)
--- a/lincan/include/eb8245.h
+++ b/lincan/include/eb8245.h
@@ -36,7 +36,7 @@
 
 int eb8245_request_io(struct candevice_t *candev);
 int eb8245_release_io(struct candevice_t *candev);
-int eb8245_reset(struct candevice_t *candev); 
+int eb8245_reset(struct candevice_t *candev);
 int eb8245_init_hw_data(struct candevice_t *candev);
 int eb8245_init_chip_data(struct candevice_t *candev, int chipnr);
 int eb8245_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/gensja1000io.h b/lincan/include/gensja1000io.h
index fc7c6fad7fd4c27cc3cfbf85e3de4ec286b4eefa..11ec8ec0da8cef0ccbb7ab15d9aef7ac4a01bfdd 100644 (file)
--- a/lincan/include/gensja1000io.h
+++ b/lincan/include/gensja1000io.h
@@ -34,7 +34,7 @@
 
 int gensja1000io_request_io(struct candevice_t *candev);
 int gensja1000io_release_io(struct candevice_t *candev);
-int gensja1000io_reset(struct candevice_t *candev); 
+int gensja1000io_reset(struct candevice_t *candev);
 int gensja1000io_init_hw_data(struct candevice_t *candev);
 int gensja1000io_init_chip_data(struct candevice_t *candev, int chipnr);
 int gensja1000io_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/gensja1000mm.h b/lincan/include/gensja1000mm.h
index 11e816ca29f99caff3b6584659cba513039024d6..7a2997caf7d3fdc20ee66e12e2c8369357b3e604 100644 (file)
--- a/lincan/include/gensja1000mm.h
+++ b/lincan/include/gensja1000mm.h
@@ -34,7 +34,7 @@
 
 int gensja1000mm_request_io(struct candevice_t *candev);
 int gensja1000mm_release_io(struct candevice_t *candev);
-int gensja1000mm_reset(struct candevice_t *candev); 
+int gensja1000mm_reset(struct candevice_t *candev);
 int gensja1000mm_init_hw_data(struct candevice_t *candev);
 int gensja1000mm_init_chip_data(struct candevice_t *candev, int chipnr);
 int gensja1000mm_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/hcan2.h b/lincan/include/hcan2.h
index 5a9b0daca68585f098cf4f2be16190eb97640e1b..599cd6b7b2d21512b82746a6daf99ad291217674 100644 (file)
--- a/lincan/include/hcan2.h
+++ b/lincan/include/hcan2.h
@@ -180,7 +180,7 @@ enum hcan2_irr {
 #define HCAN2_MB_CTRL1 0x00000002      /* Control 1 */
 #define HCAN2_MB_CTRL2 0x00000004      /* Control 2 */
 #define HCAN2_MB_TSTP  0x00000006      /* Time stamp */
-#define HCAN2_MB_DATA0 0x00000009      /* Data 0 */ 
+#define HCAN2_MB_DATA0 0x00000009      /* Data 0 */
 #define HCAN2_MB_DATA1 0x00000008      /* Data 1 */
 #define HCAN2_MB_DATA2 0x0000000b      /* Data 2 */
 #define HCAN2_MB_DATA3 0x0000000a      /* Data 3 */

diff --git a/lincan/include/i82527.h b/lincan/include/i82527.h
index 59a296a40bf730e6e39ba70514ec65c56a87ae31..6ebf94dc15e0e90d4a153378ece4e471f8d4f0d5 100644 (file)
--- a/lincan/include/i82527.h
+++ b/lincan/include/i82527.h
@@ -35,13 +35,13 @@
 int i82527_enable_configuration(struct canchip_t *chip);
 int i82527_disable_configuration(struct canchip_t *chip);
 int i82527_chip_config(struct canchip_t *chip);
-int i82527_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw, 
+int i82527_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw,
                                                int sampl_pt, int flags);
-int i82527_standard_mask(struct canchip_t *chip, unsigned short code, 
+int i82527_standard_mask(struct canchip_t *chip, unsigned short code,
                                                        unsigned short mask);
-int i82527_extended_mask(struct canchip_t *chip, unsigned long code, 
+int i82527_extended_mask(struct canchip_t *chip, unsigned long code,
                                                        unsigned long mask);
-int i82527_message15_mask(struct canchip_t *chip, unsigned long code, 
+int i82527_message15_mask(struct canchip_t *chip, unsigned long code,
                                                        unsigned long mask);
 int i82527_clear_objects(struct canchip_t *chip);
 int i82527_config_irqs(struct canchip_t *chip, short irqs);
@@ -51,7 +51,7 @@ int i82527_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
 int i82527_send_msg(struct canchip_t *chip, struct msgobj_t *obj,
                                                        struct canmsg_t *msg);
 int i82527_remote_request(struct canchip_t *chip, struct msgobj_t *obj);
-int i82527_set_btregs(struct canchip_t *chip, unsigned short btr0, 
+int i82527_set_btregs(struct canchip_t *chip, unsigned short btr0,
                                                        unsigned short btr1);
 int i82527_start_chip(struct canchip_t *chip);
 int i82527_stop_chip(struct canchip_t *chip);

diff --git a/lincan/include/m437.h b/lincan/include/m437.h
index ef769dd63c675394314b2e68b82020464d58181f..1f6941fa2d116494d44da1b409021345b453f71d 100644 (file)
--- a/lincan/include/m437.h
+++ b/lincan/include/m437.h
@@ -36,7 +36,7 @@
 
 int m437_request_io(struct candevice_t *candev);
 int m437_release_io(struct candevice_t *candev);
-int m437_reset(struct candevice_t *candev); 
+int m437_reset(struct candevice_t *candev);
 int m437_init_hw_data(struct candevice_t *candev);
 int m437_init_chip_data(struct candevice_t *candev, int chipnr);
 int m437_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/mpc5200.h b/lincan/include/mpc5200.h
index e709699e26d259dacb6c965ab0cd0e6cd4d0881e..7c343f4ac2a069274a461b41d9e1a3970bd93d7d 100644 (file)
--- a/lincan/include/mpc5200.h
+++ b/lincan/include/mpc5200.h
@@ -82,7 +82,7 @@
 
 int mpc5200_request_io(struct candevice_t *candev);
 int mpc5200_release_io(struct candevice_t *candev);
-int mpc5200_reset(struct candevice_t *candev); 
+int mpc5200_reset(struct candevice_t *candev);
 int mpc5200_init_hw_data(struct candevice_t *candev);
 int mpc5200_init_chip_data(struct candevice_t *candev, int chipnr);
 int mpc5200_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/mscan.h b/lincan/include/mscan.h
index a85a2911fa54b8161711be161c98bc80e7c32b60..641844e8924e4da3a273bf1bd845248b2963a8ce 100644 (file)
--- a/lincan/include/mscan.h
+++ b/lincan/include/mscan.h
@@ -45,7 +45,7 @@
        /* standard LinCAN core debug - used only for MPC5200 driver part */
        #define DEBUGMSG(fmt,args...) can_printk(KERN_ERR "lincan (debug): " fmt,##args)
 
-       /* dump specific parts of chip memory */        
+       /* dump specific parts of chip memory */
        #define DUMPREGS(canchip) dump_regs(canchip)
        #define DUMPBUFF(canchip, offset) dump_buff(canchip, offset)
        #define DUMPFLT(canchip) dump_filter(canchip)

diff --git a/lincan/include/msmcan.h b/lincan/include/msmcan.h
index 6aeef46e97b490b32c221e715887dfc081191879..9de8c9279d3e809b39da0eb2101797f47357f761 100644 (file)
--- a/lincan/include/msmcan.h
+++ b/lincan/include/msmcan.h
@@ -34,7 +34,7 @@
 
 int msmcan_request_io(struct candevice_t *candev);
 int msmcan_release_io(struct candevice_t *candev);
-int msmcan_reset(struct candevice_t *candev); 
+int msmcan_reset(struct candevice_t *candev);
 int msmcan_init_hw_data(struct candevice_t *candev);
 int msmcan_init_chip_data(struct candevice_t *candev, int chipnr);
 int msmcan_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/nsi.h b/lincan/include/nsi.h
index 83e3bd2f23031f4442667ee9f4b57dc0287d8552..bf57aea33231b04b01809df8b29de251918647ce 100644 (file)
--- a/lincan/include/nsi.h
+++ b/lincan/include/nsi.h
@@ -34,7 +34,7 @@
 
 int nsi_request_io(struct candevice_t *candev);
 int nsi_release_io(struct candevice_t *candev);
-int nsi_reset(struct candevice_t *candev); 
+int nsi_reset(struct candevice_t *candev);
 int nsi_init_hw_data(struct candevice_t *candev);
 int nsi_init_chip_data(struct candevice_t *candev, int chipnr);
 int nsi_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/nsi_canpci.h b/lincan/include/nsi_canpci.h
index bc044597d15c2e6978cd5ff759c7ea792d2c7422..3f3ade7f1273ba89ec1ccc86d6724d177483f0e5 100644 (file)
--- a/lincan/include/nsi_canpci.h
+++ b/lincan/include/nsi_canpci.h
@@ -34,7 +34,7 @@
 
 int nsi_canpci_request_io(struct candevice_t *candev);
 int nsi_canpci_release_io(struct candevice_t *candev);
-int nsi_canpci_reset(struct candevice_t *candev); 
+int nsi_canpci_reset(struct candevice_t *candev);
 int nsi_canpci_init_hw_data(struct candevice_t *candev);
 int nsi_canpci_init_chip_data(struct candevice_t *candev, int chipnr);
 int nsi_canpci_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/oscar.h b/lincan/include/oscar.h
index 3a8103397b5453407ee8c0fac4073faf7eb60041..f07c03e21de38534bb76d1cd75093473d553cede 100644 (file)
--- a/lincan/include/oscar.h
+++ b/lincan/include/oscar.h
@@ -34,7 +34,7 @@
 
 int oscar_request_io(struct candevice_t *candev);
 int oscar_release_io(struct candevice_t *candev);
-int oscar_reset(struct candevice_t *candev); 
+int oscar_reset(struct candevice_t *candev);
 int oscar_init_hw_data(struct candevice_t *candev);
 int oscar_init_chip_data(struct candevice_t *candev, int chipnr);
 int oscar_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/pc-i03.h b/lincan/include/pc-i03.h
index cac3e19b25967de02140ab9e51df3133446250c5..53bcd0539c843f89b57a62f214d09a7d8bd00629 100644 (file)
--- a/lincan/include/pc-i03.h
+++ b/lincan/include/pc-i03.h
@@ -34,7 +34,7 @@
 
 int pci03_request_io(struct candevice_t *candev);
 int pci03_release_io(struct candevice_t *candev);
-int pci03_reset(struct candevice_t *candev); 
+int pci03_reset(struct candevice_t *candev);
 int pci03_init_hw_data(struct candevice_t *candev);
 int pci03_init_chip_data(struct candevice_t *candev, int chipnr);
 int pci03_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/pcan_dongle.h b/lincan/include/pcan_dongle.h
index 91a2d6479a7604f16c508eea39567f1bb4f2370b..0186d0fe0e74f5c30ca44827c18856652f72565b 100644 (file)
--- a/lincan/include/pcan_dongle.h
+++ b/lincan/include/pcan_dongle.h
@@ -68,10 +68,10 @@
 /****************************************************************************/
 
 /****************************************************************************/
-// parameter wHardwareType, used by open 
-#define HW_ISA             1 // not supported with LINUX, 82C200 chip 
+// parameter wHardwareType, used by open
+#define HW_ISA             1 // not supported with LINUX, 82C200 chip
 #define HW_DONGLE_SJA      5
-#define HW_DONGLE_SJA_EPP  6 
+#define HW_DONGLE_SJA_EPP  6
 #define HW_DONGLE_PRO      7 // not yet supported with LINUX
 #define HW_DONGLE_PRO_EPP  8 // not yet supported with LINUX
 #define HW_ISA_SJA         9 // use this also for PC/104
@@ -82,7 +82,7 @@
 struct DONGLE_PORT
 {
   u32  dwPort;                                             // the port of the transport layer
-  u16  wIrq;                                               // the associated irq 
+  u16  wIrq;                                               // the associated irq
   struct pardevice *pardev;                                // points to the associated parallel port (PARPORT subsytem)
   u16  wEcr;                                               // ECR register in case of EPP
   u8   ucOldDataContent;                                   // the overwritten contents of the port registers
@@ -104,7 +104,7 @@ struct DONGLE_PORT
 
 int pcan_dongle_request_io(struct candevice_t *candev);
 int pcan_dongle_release_io(struct candevice_t *candev);
-int pcan_dongle_reset(struct candevice_t *candev); 
+int pcan_dongle_reset(struct candevice_t *candev);
 int pcan_dongle_init_hw_data(struct candevice_t *candev);
 int pcan_dongle_init_chip_data(struct candevice_t *candev, int chipnr);
 int pcan_dongle_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/pccan.h b/lincan/include/pccan.h
index 0d27212708d7c5434dcbc10b5f65615017f0fa16..4fda79579fa2206cca9c7b5ad5bb03d49b73251c 100644 (file)
--- a/lincan/include/pccan.h
+++ b/lincan/include/pccan.h
@@ -40,7 +40,7 @@ int pccanq_request_io(struct candevice_t *candev);
 int pccanq_release_io(struct candevice_t *candev);
 int pccanf_reset(struct candevice_t *candev);
 int pccand_reset(struct candevice_t *candev);
-int pccanq_reset(struct candevice_t *candev); 
+int pccanq_reset(struct candevice_t *candev);
 int pccan_init_hw_data(struct candevice_t *candev);
 int pccan_init_chip_data(struct candevice_t *candev, int chipnr);
 int pccan_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/pcccan.h b/lincan/include/pcccan.h
index e343f8a98b6bce966442f31c15ab818a25354fc5..d0d3137a55670f84e76969ebb68f94d9b61e966f 100644 (file)
--- a/lincan/include/pcccan.h
+++ b/lincan/include/pcccan.h
@@ -34,7 +34,7 @@
 
 int pcccan_request_io(struct candevice_t *candev);
 int pcccan_release_io(struct candevice_t *candev);
-int pcccan_reset(struct candevice_t *candev); 
+int pcccan_reset(struct candevice_t *candev);
 int pcccan_init_hw_data(struct candevice_t *candev);
 int pcccan_init_chip_data(struct candevice_t *candev, int chipnr);
 int pcccan_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/pcm3680.h b/lincan/include/pcm3680.h
index 6685dedaac18ca607df7d5535264fec535f7aa44..77edeb0f227a360ef98583f738fcb71fc5799f33 100644 (file)
--- a/lincan/include/pcm3680.h
+++ b/lincan/include/pcm3680.h
@@ -34,7 +34,7 @@
 
 int pcm3680_request_io(struct candevice_t *candev);
 int pcm3680_release_io(struct candevice_t *candev);
-int pcm3680_reset(struct candevice_t *candev); 
+int pcm3680_reset(struct candevice_t *candev);
 int pcm3680_init_hw_data(struct candevice_t *candev);
 int pcm3680_init_chip_data(struct candevice_t *candev, int chipnr);
 int pcm3680_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/pip.h b/lincan/include/pip.h
index 4ac90474ee7082cffce14f46a4831c0eebdf42f6..36ff455fe879b57f39d807a51c17bcb7afa6d944 100644 (file)
--- a/lincan/include/pip.h
+++ b/lincan/include/pip.h
@@ -36,7 +36,7 @@
 
 int pip_request_io(struct candevice_t *candev);
 int pip_release_io(struct candevice_t *candev);
-int pip_reset(struct candevice_t *candev); 
+int pip_reset(struct candevice_t *candev);
 int pip_init_hw_data(struct candevice_t *candev);
 int pip_init_chip_data(struct candevice_t *candev, int chipnr);
 int pip_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/sh7760.h b/lincan/include/sh7760.h
index 5bbfb6c393724eba27a7c96fccb080ac1b8873e2..d8746fd4505b5150754d92d67065a749198d0e52 100644 (file)
--- a/lincan/include/sh7760.h
+++ b/lincan/include/sh7760.h
@@ -49,7 +49,7 @@
 
 int sh7760_request_io(struct candevice_t *candev);
 int sh7760_release_io(struct candevice_t *candev);
-int sh7760_reset(struct candevice_t *candev); 
+int sh7760_reset(struct candevice_t *candev);
 int sh7760_init_hw_data(struct candevice_t *candev);
 int sh7760_init_chip_data(struct candevice_t *candev, int chipnr);
 int sh7760_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/include/sja1000.h b/lincan/include/sja1000.h
index e592acbc9638fdc9cf486fe23397e794b7c5be93..b329e2b30abe93316f7f672a60f524b9699dd37c 100644 (file)
--- a/lincan/include/sja1000.h
+++ b/lincan/include/sja1000.h
@@ -36,15 +36,15 @@ int sja1000_enable_configuration(struct canchip_t *chip);
 int sja1000_disable_configuration(struct canchip_t *chip);
 int sja1000_chip_config(struct canchip_t *chip);
 int sja1000_standard_mask(struct canchip_t *chip, unsigned short code, unsigned short mask);
-int sja1000_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw, 
+int sja1000_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw,
                                                int sampl_pt, int flags);
 int sja1000_pre_read_config(struct canchip_t *chip, struct msgobj_t *obj);
-int sja1000_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj, 
+int sja1000_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
                                                        struct canmsg_t *msg);
-int sja1000_send_msg(struct canchip_t *chip, struct msgobj_t *obj, 
+int sja1000_send_msg(struct canchip_t *chip, struct msgobj_t *obj,
                                                        struct canmsg_t *msg);
 int sja1000_check_tx_stat(struct canchip_t *chip);
-int sja1000_set_btregs(struct canchip_t *chip, unsigned short btr0, 
+int sja1000_set_btregs(struct canchip_t *chip, unsigned short btr0,
                                                        unsigned short btr1);
 int sja1000_start_chip(struct canchip_t *chip);
 int sja1000_stop_chip(struct canchip_t *chip);
@@ -139,7 +139,7 @@ enum sja1000_CDR {
        sjaCDR_CLK_OFF = 1<<3,  // Clock Off
        sjaCDR_RXINPEN = 1<<5,  // TX1 output is RX irq output
        sjaCDR_CBP = 1<<6,      // Input Comparator By-Pass
-       sjaCDR_PELICAN = 1<<7   // PeliCAN Mode 
+       sjaCDR_PELICAN = 1<<7   // PeliCAN Mode
 };
 
 /* Output Control Register */

diff --git a/lincan/include/sja1000p.h b/lincan/include/sja1000p.h
index 24e2357559c54520a097efb5775bb5e08dd219fc..ae331b93f08dc195225cf4231794f3521e3a81ab 100644 (file)
--- a/lincan/include/sja1000p.h
+++ b/lincan/include/sja1000p.h
@@ -81,7 +81,7 @@ enum SJA1000_PeliCAN_regs {
 /// Transmit Buffer (write) Receive Buffer (read) Frame Information
        SJAFRM = 0x10,
 /// ID bytes (11 bits in 0 and 1 or 16 bits in 0,1 and 13 bits in 2,3 (extended))
-       SJAID0 = 0x11, SJAID1 = 0x12, 
+       SJAID0 = 0x11, SJAID1 = 0x12,
 /// ID cont. for extended frames
        SJAID2 = 0x13, SJAID3 = 0x14,
 /// Data start standard frame
@@ -93,7 +93,7 @@ enum SJA1000_PeliCAN_regs {
 /// Acceptance Mask (4 bytes) in RESET mode
        SJAAMR0 = 0x14,
 /// 4 bytes
-       SJA_PeliCAN_AC_LEN = 4, 
+       SJA_PeliCAN_AC_LEN = 4,
 /// Clock Divider
        SJACDR = 0x1f
 };
@@ -108,7 +108,7 @@ enum sja1000_PeliCAN_MOD {
 };
 
 /** Command Register 0x01 */
-enum sja1000_PeliCAN_CMR { 
+enum sja1000_PeliCAN_CMR {
        sjaCMR_SRR= 1<<4,  // Self Reception Request (GoToSleep in BASIC mode)
        sjaCMR_CDO= 1<<3,  // Clear Data Overrun
        sjaCMR_RRB= 1<<2,  // Release Receive Buffer
@@ -138,7 +138,7 @@ enum sja1000_PeliCAN_IER {
        sjaIER_RIE = 1,    // Receive Interrupt Enable
        sjaENABLE_INTERRUPTS = sjaIER_BEIE|sjaIER_EPIE|sjaIER_DOIE|sjaIER_EIE|sjaIER_TIE|sjaIER_RIE,
        sjaDISABLE_INTERRUPTS = 0
-// WARNING: the chip automatically enters RESET (bus off) mode when 
+// WARNING: the chip automatically enters RESET (bus off) mode when
        // error counter > 255
 };
 

diff --git a/lincan/include/template.h b/lincan/include/template.h
index d75709fd8bf503e65eca82b19dd2ba923c9e27f4..042f7444f14eba06b27bcbee01461a7804192253 100644 (file)
--- a/lincan/include/template.h
+++ b/lincan/include/template.h
@@ -34,7 +34,7 @@
 
 int template_request_io(struct candevice_t *candev);
 int template_release_io(struct candevice_t *candev);
-int template_reset(struct candevice_t *candev); 
+int template_reset(struct candevice_t *candev);
 int template_init_hw_data(struct candevice_t *candev);
 int template_init_chip_data(struct candevice_t *candev, int chipnr);
 int template_init_obj_data(struct canchip_t *chip, int objnr);

diff --git a/lincan/src/adlink7841.c b/lincan/src/adlink7841.c
index 53853327dfd4965e28c0d1255b0ec897549e7832..d65a2a90d5f4963d4aedec2e968dbddb69322bd9 100644 (file)
--- a/lincan/src/adlink7841.c
+++ b/lincan/src/adlink7841.c
@@ -53,13 +53,13 @@
 
 /*
 
-You need to know the following: 
-" RX1 is connected to ground. 
-" TX1 is not connected. 
-" CLKO is not connected. 
-" Setting the OCR register to 0xFA is a good idea. 
-  This means  normal output mode , push-pull and the correct polarity. 
-" In the CDR register, you should set CBP to 1. 
+You need to know the following:
+" RX1 is connected to ground.
+" TX1 is not connected.
+" CLKO is not connected.
+" Setting the OCR register to 0xFA is a good idea.
+  This means  normal output mode , push-pull and the correct polarity.
+" In the CDR register, you should set CBP to 1.
   You will probably also want to set the clock divider value to 0 (meaning divide-by-2),
   the Pelican bit, and the clock-off bit (you have no need for CLKOUT anyway.)
 
@@ -101,7 +101,7 @@ int adlink7841_request_io(struct candevice_t *candev)
     error_io:
        pci_release_region(candev->sysdevptr.pcidev, 1);
     #endif /*(LINUX_VERSION_CODE > KERNEL_VERSION(2,4,21))*/
-       
+
        return -ENODEV;
 }
 
@@ -122,7 +122,7 @@ int adlink7841_release_io(struct candevice_t *candev)
 
 void adlink7841_write_register(unsigned data, can_ioptr_t address)
 {
-       can_outb(data,address); 
+       can_outb(data,address);
 }
 
 unsigned adlink7841_read_register(can_ioptr_t address)
@@ -164,15 +164,15 @@ int adlink7841_reset(struct candevice_t *candev)
                adlink7841_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
 
                adlink7841_write_register(0, chip->chip_base_addr+SJAIER);
-               
+
                adlink7841_read_register(chip->chip_base_addr+SJAIR);
        }
-       
+
 
        adlink7841_connect_irq(candev);
 
        return 0;
-}      
+}
 
 int adlink7841_init_hw_data(struct candevice_t *candev)
 {
@@ -182,14 +182,14 @@ int adlink7841_init_hw_data(struct candevice_t *candev)
        pcidev = can_pci_get_next_untaken_device(ADLINK7841_PCI_VENDOR_ID, ADLINK7841_PCI_PRODUCT_ID);
        if(pcidev == NULL)
                return -ENODEV;
-       
+
        if (pci_enable_device (pcidev)){
                printk(KERN_CRIT "Setup of ADLINK7841 failed\n");
                can_pci_dev_put(pcidev);
                return -EIO;
        }
        candev->sysdevptr.pcidev=pcidev;
-       
+
        for(i=1;i<3;i++){
                if(!(pci_resource_flags(pcidev,i)&IORESOURCE_IO)){
                        printk(KERN_CRIT "ADLINK7841 region %d is not IO\n",i);
@@ -200,7 +200,7 @@ int adlink7841_init_hw_data(struct candevice_t *candev)
        candev->dev_base_addr=pci_resource_start(pcidev,1); /* PLX 9050 BASE*/
        candev->io_addr=pci_resource_start(pcidev,2); /*IO window for SJA1000 chips*/
        candev->res_addr=pci_resource_start(pcidev,1); /*reserved*/
-       
+
        /*candev->flags |= CANDEV_PROGRAMMABLE_IRQ;*/
 
        candev->nr_82527_chips=0;
@@ -221,7 +221,7 @@ int adlink7841_init_chip_data(struct candevice_t *candev, int chipnr)
 
        if(candev->sysdevptr.pcidev==NULL)
                return -ENODEV;
-       
+
        candev->chip[chipnr]->chip_irq=candev->sysdevptr.pcidev->irq;
 
        sja1000p_fill_chipspecops(candev->chip[chipnr]);
@@ -237,7 +237,7 @@ int adlink7841_init_chip_data(struct candevice_t *candev, int chipnr)
        candev->chip[chipnr]->flags |= CHIP_IRQ_PCI;
 
        return 0;
-}      
+}
 
 int adlink7841_init_obj_data(struct canchip_t *chip, int objnr)
 {

diff --git a/lincan/src/aim104.c b/lincan/src/aim104.c
index d6dad7beadc51fe082aa01d6b3d539f721936eae..357fe41723b114eef5b556c0ca20b789703af36e 100644 (file)
--- a/lincan/src/aim104.c
+++ b/lincan/src/aim104.c
@@ -52,7 +52,7 @@
  *
  * The function template_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
- * will have to add the code to reserve this memory as well. 
+ * will have to add the code to reserve this memory as well.
  * %IO_RANGE is the io-memory range that gets reserved, please adjust according
  * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
  * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
@@ -93,8 +93,8 @@ int aim104_release_io(struct candevice_t *candev)
  * template_reset - hardware reset routine
  * @candev: Pointer to candevice/board structure
  *
- * The function template_reset() is used to give a hardware reset. This is 
- * rather hardware specific so I haven't included example code. Don't forget to 
+ * The function template_reset() is used to give a hardware reset. This is
+ * rather hardware specific so I haven't included example code. Don't forget to
  * check the reset status of the chip before returning.
  * Return Value: The function returns zero on success or %-ENODEV on failure
  * File: src/template.c
@@ -106,10 +106,10 @@ int aim104_reset(struct candevice_t *candev)
        DEBUGMSG("Resetting aim104 hardware ...\n");
 
        aim104_write_register(0x00, candev->io_addr + SJACR);
-                                                                       
+
        /* Check hardware reset status chip 0 */
        i=0;
-       while ( (aim104_read_register(candev->io_addr + SJACR) 
+       while ( (aim104_read_register(candev->io_addr + SJACR)
                                                        & sjaCR_RR) && (i<=15) ) {
                udelay(20000);
                i++;
@@ -143,7 +143,7 @@ int aim104_reset(struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/template.c
  */
-int aim104_init_hw_data(struct candevice_t *candev) 
+int aim104_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=RESET_ADDR;
        candev->nr_82527_chips=0;
@@ -177,7 +177,7 @@ int aim104_init_hw_data(struct candevice_t *candev)
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
- * The entry @int_bus_reg holds hardware specific options for the Bus 
+ * The entry @int_bus_reg holds hardware specific options for the Bus
  * Configuration register. Options defined in the %i82527.h file:
  * %iBUS_DR0, %iBUS_DR1, %iBUS_DT1, %iBUS_POL, %iBUS_CBY.
  * Return Value: The function always returns zero
@@ -205,7 +205,7 @@ int aim104_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry @obj_base_addr represents the first memory address of the message 
+ * The entry @obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 @obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -216,7 +216,7 @@ int aim104_init_obj_data(struct canchip_t *chip, int objnr)
 {
        chip->msgobj[objnr]->obj_base_addr=chip->chip_base_addr;
        chip->msgobj[objnr]->obj_flags=0;
-       
+
        return 0;
 }
 
@@ -224,10 +224,10 @@ int aim104_init_obj_data(struct canchip_t *chip, int objnr)
  * template_program_irq - program interrupts
  * @candev: Pointer to candevice/board structure
  *
- * The function template_program_irq() is used for hardware that uses 
+ * The function template_program_irq() is used for hardware that uses
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
- * leave this function unedited. Again this function is hardware specific so 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
  * File: src/template.c

diff --git a/lincan/src/c_can_irq.c b/lincan/src/c_can_irq.c
index aad86b62170be7ff71fe90b060d8e26a0133f9b2..400e8676866e144592cd24df79141e7e1a5af184 100644 (file)
--- a/lincan/src/c_can_irq.c
+++ b/lincan/src/c_can_irq.c
@@ -248,7 +248,7 @@ void c_can_irq_sync_activities(struct canchip_t *pchip, struct msgobj_t *obj)
                if(can_msgobj_test_and_clear_fl(obj,TX_REQUEST)) {
                        int cctreqx;
                        int idxobj = obj->object-1;
-                       
+
                        if(idxobj<0) {
                                DEBUGMSG("c_can_irq_sync_activities wrong idxobj\n");
                                break;

diff --git a/lincan/src/can_devrtl.c b/lincan/src/can_devrtl.c
index f4973074503c4553afb768779257edb60b97e73b..585956c93d52cdcfb844eb2bba9e0de61c20b8dc 100644 (file)
--- a/lincan/src/can_devrtl.c
+++ b/lincan/src/can_devrtl.c
@@ -60,7 +60,7 @@ unsigned int can_rtl_isr( unsigned int irq_num, struct pt_regs *r )
        pthread_t thread=NULL;
 
        DEBUGMSG("can_rtl_isr invoked for irq %d\n",irq_num);
-       
+
        /* I hate next loop, but RT-Linux does not provide context to ISR */
        for (board_nr=hardware_p->nr_boards; board_nr--; ) {
                if((candev=hardware_p->candevice[board_nr])==NULL)
@@ -107,10 +107,10 @@ RTL_MARK_READY(pthread_self())
 RTL_MARK_SUSPENDED(pthread_self());
 return rtl_schedule();
 can_enable_irq
-can_disable_irq 
+can_disable_irq
 rtl_critical( state )
 rtl_end_critical( state )
-rtl_request_global_irq( irq, isr ); 
+rtl_request_global_irq( irq, isr );
 rtl_free_global_irq( irq )
 */
 
@@ -121,23 +121,23 @@ void * can_chip_worker_thread(void *arg)
        int ret, i;
        int loop_cnt;
        rtl_irqstate_t flags;
-       
+
        if(!chip) return 0;
-       
-       
+
+
        if (!(chip->flags & CHIP_CONFIGURED)){
                if (chip->chipspecops->chip_config(chip))
                        CANMSG("Error configuring chip.\n");
                else
-                       chip->flags |= CHIP_CONFIGURED; 
+                       chip->flags |= CHIP_CONFIGURED;
 
                if((chip->msgobj[0])!=NULL)
                        if (chip->chipspecops->pre_read_config(chip,chip->msgobj[0])<0)
                                CANMSG("Error initializing chip for receiving\n");
-                               
+
        } /* End of chip configuration */
        set_bit(MSGOBJ_IRQ_REQUEST_b,&chip->pend_flags);
-       
+
 
        while (1) {
                DEBUGMSG("Worker thread for chip %d active\n",chip->chip_idx);
@@ -180,7 +180,7 @@ void * can_chip_worker_thread(void *arg)
                         *
                         * irq_accept added to the LinCAN driver now,
                         * and above workaround should not be required.
-                        * Enable rtl_hard_enable_irq() at line 
+                        * Enable rtl_hard_enable_irq() at line
                         * ca91c042.c:1045
                         */
                    #endif /*CAN_ENABLE_VME_SUPPORT*/
@@ -208,10 +208,10 @@ int can_chip_setup_irq(struct canchip_t *chip)
         struct sched_param sched_param;
         pthread_attr_t attrib;
        pthread_attr_t *attrib_p=NULL;
-       
+
        if(chip==NULL)
                return -1;
-       
+
        if(can_rtl_priority>=0){
                pthread_attr_init(&attrib);
                sched_param.sched_priority = can_rtl_priority;
@@ -219,7 +219,7 @@ int can_chip_setup_irq(struct canchip_t *chip)
                /* pthread_attr_setschedpolicy(&attrib, SCHED_FIFO); */
                attrib_p=&attrib;
        }
-       
+
        if(chip->chipspecops->irq_handler && !(chip->flags & CHIP_IRQ_CUSTOM)){
                int (*my_request_irq)(unsigned int vector, unsigned int (*rtl_handler)(unsigned int irq, struct pt_regs *regs));
 #ifdef CAN_ENABLE_VME_SUPPORT
@@ -238,7 +238,7 @@ int can_chip_setup_irq(struct canchip_t *chip)
        }
         ret=pthread_create(&chip->worker_thread, attrib_p, can_chip_worker_thread, chip);
        if(ret<0) chip->worker_thread=NULL;
-       
+
        return ret;
 }
 

diff --git a/lincan/src/can_quekern.c b/lincan/src/can_quekern.c
index 69417872ac3c73bccd31c5a149f1296e92ff9eff..a102ac2a314005923f3ff69af35b40b445ddbbce 100644 (file)
--- a/lincan/src/can_quekern.c
+++ b/lincan/src/can_quekern.c
@@ -51,8 +51,8 @@ extern atomic_t edge_num_cnt;
        ##args)
 
 
-/* 
- * Modifies Tx message processing 
+/*
+ * Modifies Tx message processing
  *  0 .. local message processing disabled
  *  1 .. local messages disabled by default but can be enabled by canque_set_filt
  *  2 .. local messages enabled by default, can be disabled by canque_set_filt
@@ -105,7 +105,7 @@ void canque_dead_func(unsigned long data)
                canque_fifo_done_kern(&qedge->fifo);
                kfree(qedge);
        }
-       
+
        can_spin_lock_irqsave(&canque_dead_func_lock, flags);
        entry=canque_dead_ends.next;
        can_spin_unlock_irqrestore(&canque_dead_func_lock,flags);
@@ -150,7 +150,7 @@ static inline void canque_dead_tasklet_schedule(void)
 void canque_edge_do_dead(struct canque_edge_t *edge)
 {
        can_spin_irqflags_t flags;
-       
+
        canque_notify_bothends(edge,CANQUEUE_NOTIFY_NOUSR);
     #ifdef CAN_WITH_RTL
        /* The problem of the above call is, that in RT-Linux to Linux notify
@@ -171,7 +171,7 @@ void canque_edge_do_dead(struct canque_edge_t *edge)
                can_spin_unlock_irqrestore(&edge->inends->ends_lock, flags);
        }
     #endif /*CAN_WITH_RTL*/
-       
+
        if(canqueue_disconnect_edge(edge)<0){
                ERRMSGQUE("canque_edge_do_dead: canqueue_disconnect_edge failed !!!\n");
                return;
@@ -197,14 +197,14 @@ void canque_edge_do_dead(struct canque_edge_t *edge)
 /**
  * canqueue_notify_kern - notification callback handler for Linux userspace clients
  * @qends: pointer to the callback side ends structure
- * @qedge: edge which invoked notification 
+ * @qedge: edge which invoked notification
  * @what: notification type
  *
  * The notification event is handled directly by call of this function except case,
  * when called from RT-Linux context in mixed mode Linux/RT-Linux compilation.
  * It is not possible to directly call Linux kernel synchronization primitives
  * in such case. The notification request is postponed and signaled by @pending_inops flags
- * by call canqueue_rtl2lin_check_and_pend() function. 
+ * by call canqueue_rtl2lin_check_and_pend() function.
  * The edge reference count is increased until until all pending notifications are processed.
  */
 void canqueue_notify_kern(struct canque_ends_t *qends, struct canque_edge_t *qedge, int what)
@@ -217,7 +217,7 @@ void canqueue_notify_kern(struct canque_ends_t *qends, struct canque_edge_t *qed
                DEBUGQUE("canqueue_notify_kern postponed\n");
                return;
        }
-       
+
        switch(what){
                case CANQUEUE_NOTIFY_EMPTY:
                        wake_up(&qends->endinfo.fileinfo.emptyq);
@@ -228,14 +228,14 @@ void canqueue_notify_kern(struct canque_ends_t *qends, struct canque_edge_t *qed
                        wake_up(&qends->endinfo.fileinfo.writeq);
                    #ifdef CAN_ENABLE_KERN_FASYNC
                        /* Asynchronous I/O processing */
-                       kill_fasync(&qends->endinfo.fileinfo.fasync, SIGIO, POLL_OUT); 
+                       kill_fasync(&qends->endinfo.fileinfo.fasync, SIGIO, POLL_OUT);
                    #endif /*CAN_ENABLE_KERN_FASYNC*/
                        break;
                case CANQUEUE_NOTIFY_PROC:
                        wake_up(&qends->endinfo.fileinfo.readq);
                    #ifdef CAN_ENABLE_KERN_FASYNC
                        /* Asynchronous I/O processing */
-                       kill_fasync(&qends->endinfo.fileinfo.fasync, SIGIO, POLL_IN); 
+                       kill_fasync(&qends->endinfo.fileinfo.fasync, SIGIO, POLL_IN);
                    #endif /*CAN_ENABLE_KERN_FASYNC*/
                        break;
                case CANQUEUE_NOTIFY_NOUSR:
@@ -267,7 +267,7 @@ int canqueue_ends_init_kern(struct canque_ends_t *qends)
     #ifdef CAN_ENABLE_KERN_FASYNC
        qends->endinfo.fileinfo.fasync=NULL;
     #endif /*CAN_ENABLE_KERN_FASYNC*/
-       
+
        qends->notify=canqueue_notify_kern;
        DEBUGQUE("canqueue_ends_init_kern\n");
        return 0;
@@ -293,7 +293,7 @@ int canque_get_inslot4id_wait_kern(struct canque_ends_t *qends,
 {
        int ret=-1;
        DEBUGQUE("canque_get_inslot4id_wait_kern for cmd %d, id %ld, prio %d\n",cmd,id,prio);
-       wait_event_interruptible((qends->endinfo.fileinfo.writeq), 
+       wait_event_interruptible((qends->endinfo.fileinfo.writeq),
                (ret=canque_get_inslot4id(qends,qedgep,slotp,cmd,id,prio))!=-1);
        return ret;
 }
@@ -315,7 +315,7 @@ int canque_get_outslot_wait_kern(struct canque_ends_t *qends,
 {
        int ret=-1;
        DEBUGQUE("canque_get_outslot_wait_kern\n");
-       wait_event_interruptible((qends->endinfo.fileinfo.readq), 
+       wait_event_interruptible((qends->endinfo.fileinfo.readq),
                (ret=canque_test_outslot(qends,qedgep,slotp))!=-1);
        return ret;
 }
@@ -333,7 +333,7 @@ int canque_sync_wait_kern(struct canque_ends_t *qends, struct canque_edge_t *qed
 {
        int ret=-1;
        DEBUGQUE("canque_sync_wait_kern\n");
-       wait_event_interruptible((qends->endinfo.fileinfo.emptyq), 
+       wait_event_interruptible((qends->endinfo.fileinfo.emptyq),
                (ret=canque_fifo_test_fl(&qedge->fifo,EMPTY)?1:0));
        return ret;
 }
@@ -422,12 +422,12 @@ int canqueue_disconnect_edge_kern(struct canque_ends_t *qends, struct canque_edg
        DEBUGQUE("canqueue_disconnect_edge_kern %d called\n",qedge->edge_num);
        if(!canque_fifo_test_and_set_fl(&qedge->fifo,DEAD)){
                canque_notify_bothends(qedge, CANQUEUE_NOTIFY_DEAD);
-               
+
                if(atomic_read(&qedge->edge_used)>0)
                        atomic_dec(&qedge->edge_used);
 
                DEBUGQUE("canqueue_disconnect_edge_kern %d waiting\n",qedge->edge_num);
-               wait_event((qends->endinfo.fileinfo.emptyq), 
+               wait_event((qends->endinfo.fileinfo.emptyq),
                        (canqueue_disconnect_edge(qedge)>=0));
 
                /*set_current_state(TASK_UNINTERRUPTIBLE);*/
@@ -476,7 +476,7 @@ int canqueue_disconnect_list_kern(struct canque_ends_t *qends, struct list_head
 int canqueue_ends_sync_all_kern(struct canque_ends_t *qends)
 {
        struct canque_edge_t *qedge;
-       
+
        canque_for_each_inedge(qends, qedge){
                DEBUGQUE("canque_sync_wait_kern called for edge %d\n",qedge->edge_num);
                canque_sync_wait_kern(qends, qedge);
@@ -516,7 +516,7 @@ int canqueue_ends_dispose_kern(struct canque_ends_t *qends, int sync)
        /*Wait for sending of all pending messages in the output FIFOs*/
        if(sync)
                canqueue_ends_sync_all_kern(qends);
-       
+
        /* Finish or kill all outgoing edges listed in inends */
        delayed=canqueue_ends_kill_inlist(qends, 1);
        /* Kill all incoming edges listed in outends */

diff --git a/lincan/src/can_quertl.c b/lincan/src/can_quertl.c
index 0bc83c0e9eac6ca2c897b91c94a4e275576fb6bf..50d60819feea15d5d37096297637bd7a3c9eea88 100644 (file)
--- a/lincan/src/can_quertl.c
+++ b/lincan/src/can_quertl.c
@@ -39,8 +39,8 @@
 
 #include <rtl_malloc.h>
 
-/* 
- * Modifies Tx message processing 
+/*
+ * Modifies Tx message processing
  *  0 .. local message processing disabled
  *  1 .. local messages disabled by default but can be enabled by canque_set_filt
  *  2 .. local messages enabled by default, can be disabled by canque_set_filt
@@ -65,7 +65,7 @@ canqueue_rtl2lin_handler(int irq, void *ignore, struct pt_regs *ignoreregs)
        unsigned pending_inops;
        unsigned pending_outops;
        int i;
-       
+
        can_spin_lock_irqsave (&canque_pending_edges_lock, flags);
 
        while(!list_empty(&canque_pending_edges_list)){
@@ -94,7 +94,7 @@ canqueue_rtl2lin_handler(int irq, void *ignore, struct pt_regs *ignoreregs)
                        if(pending_inops&1)
                                canque_notify_inends(qedge,i);
                }
-               
+
                canque_edge_decref(qedge);
                can_spin_lock_irqsave (&canque_pending_edges_lock, flags);
        }
@@ -109,7 +109,7 @@ canqueue_rtl2lin_handler(int irq, void *ignore, struct pt_regs *ignoreregs)
 
 
 /**
- * canqueue_rtl2lin_check_and_pend - postpones edge notification if called from RT-Linux 
+ * canqueue_rtl2lin_check_and_pend - postpones edge notification if called from RT-Linux
  * @qends: notification target ends
  * @qedge: edge delivering notification
  * @what:  notification type
@@ -126,7 +126,7 @@ int canqueue_rtl2lin_check_and_pend(struct canque_ends_t *qends,
        if(rtl_rt_system_is_idle()) return 0;
 
        can_spin_lock_irqsave (&canque_pending_edges_lock, flags);
-       
+
        if(what>CANQUE_PENDOPS_LIMIT) what=CANQUE_PENDOPS_LIMIT;
 
        if(qends == qedge->inends) {
@@ -142,7 +142,7 @@ int canqueue_rtl2lin_check_and_pend(struct canque_ends_t *qends,
        }
 
        can_spin_unlock_irqrestore (&canque_pending_edges_lock, flags);
-       
+
        return 1;
 
 }
@@ -169,7 +169,7 @@ int canque_get_inslot4id_wait_rtl(struct canque_ends_t *qends,
        int ret;
        unsigned old_age;
        rtl_sigset_t sigset;
-       
+
        old_age=atomic_read(&qends->endinfo.rtlinfo.rtl_writeq_age);
        while((ret=canque_get_inslot4id(qends,qedgep,slotp,cmd,id,prio))==-1){
                rtl_sigemptyset(&sigset);
@@ -181,7 +181,7 @@ int canque_get_inslot4id_wait_rtl(struct canque_ends_t *qends,
                        return -1;
                old_age=atomic_read(&qends->endinfo.rtlinfo.rtl_writeq_age);
        }
-       
+
        return ret;
 }
 
@@ -205,7 +205,7 @@ int canque_get_outslot_wait_rtl(struct canque_ends_t *qends,
        int ret;
        unsigned old_age;
        rtl_sigset_t sigset;
-       
+
        old_age=atomic_read(&qends->endinfo.rtlinfo.rtl_readq_age);
        while((ret=canque_test_outslot(qends,qedgep,slotp))==-1){
                rtl_sigemptyset(&sigset);
@@ -236,7 +236,7 @@ int canque_sync_wait_rtl(struct canque_ends_t *qends, struct canque_edge_t *qedg
        int ret;
        unsigned old_age;
        rtl_sigset_t sigset;
-       
+
        old_age=atomic_read(&qends->endinfo.rtlinfo.rtl_emptyq_age);
        while(!(ret=canque_fifo_test_fl(&qedge->fifo,EMPTY)?1:0)){
                rtl_sigemptyset(&sigset);
@@ -248,7 +248,7 @@ int canque_sync_wait_rtl(struct canque_ends_t *qends, struct canque_edge_t *qedg
                        return -1;
                old_age=atomic_read(&qends->endinfo.rtlinfo.rtl_emptyq_age);
        }
-       
+
        return ret;
 }
 
@@ -332,13 +332,13 @@ void canque_ends_free_rtl(struct canque_ends_t *qends)
 /**
  * canqueue_notify_rtl - notification callback handler for Linux userspace clients
  * @qends: pointer to the callback side ends structure
- * @qedge: edge which invoked notification 
+ * @qedge: edge which invoked notification
  * @what: notification type
  */
 void canqueue_notify_rtl(struct canque_ends_t *qends, struct canque_edge_t *qedge, int what)
 {
        rtl_irqstate_t flags;
-       
+
        switch(what){
                case CANQUEUE_NOTIFY_EMPTY:
                        rtl_spin_lock_irqsave(&qends->endinfo.rtlinfo.rtl_lock, flags);
@@ -397,7 +397,7 @@ int canqueue_ends_init_rtl(struct canque_ends_t *qends)
        rtl_wait_init(&(qends->endinfo.rtlinfo.rtl_readq));
        rtl_wait_init(&(qends->endinfo.rtlinfo.rtl_writeq));
        rtl_wait_init(&(qends->endinfo.rtlinfo.rtl_emptyq));
-       
+
        qends->notify=canqueue_notify_rtl;
        qends->endinfo.rtlinfo.pend_flags=0;
        return 0;
@@ -422,7 +422,7 @@ int canqueue_ends_dispose_rtl(struct canque_ends_t *qends, int sync)
        /*Wait for sending of all pending messages in the output FIFOs*/
        /*if(sync)
                canqueue_ends_sync_all_rtl(qends);*/
-       
+
        /* Finish or kill all outgoing edges listed in inends */
        delayed=canqueue_ends_kill_inlist(qends, 1);
        /* Kill all incoming edges listed in outends */

diff --git a/lincan/src/can_queue.c b/lincan/src/can_queue.c
index db433af9220df27d44ff82612c77cfe254de54f7..6395207b3d859ac394f67ac01986738cd41434a9 100644 (file)
--- a/lincan/src/can_queue.c
+++ b/lincan/src/can_queue.c
@@ -35,8 +35,8 @@
 #include "../include/can_sysdep.h"
 #include "../include/can_queue.h"
 
-/* 
- * Modifies Tx message processing 
+/*
+ * Modifies Tx message processing
  *  0 .. local message processing disabled
  *  1 .. local messages disabled by default but can be enabled by canque_set_filt
  *  2 .. local messages enabled by default, can be disabled by canque_set_filt
@@ -144,7 +144,7 @@ int canque_get_inslot(struct canque_ends_t *qends,
 {
        int ret=-2;
        struct canque_edge_t *edge;
-       
+
        edge=canque_first_inedge(qends);
        if(edge){
                if(!canque_fifo_test_fl(&edge->fifo,BLOCK)){
@@ -186,7 +186,7 @@ int canque_get_inslot4id(struct canque_ends_t *qends,
 {
        int ret=-2;
        struct canque_edge_t *edge, *bestedge=NULL;
-       
+
        canque_for_each_inedge(qends, edge){
                if(canque_fifo_test_fl(&edge->fifo,BLOCK))
                        continue;
@@ -292,7 +292,7 @@ int canque_filter_msg2edges(struct canque_ends_t *qends, struct canmsg_t *msg)
        unsigned long msgid;
        struct canque_edge_t *edge;
        struct canque_slot_t *slot;
-       
+
        DEBUGQUE("canque_filter_msg2edges for msg ID 0x%08lx and flags 0x%02x\n",
                        msg->id, msg->flags);
        msgid = canque_filtid2internal(msg->id, msg->flags);
@@ -337,7 +337,7 @@ int canque_test_outslot(struct canque_ends_t *qends,
        int prio;
        struct canque_edge_t *edge;
        int ret;
-       
+
        can_spin_lock_irqsave(&qends->ends_lock, flags);
        for(prio=CANQUEUE_PRIO_NR;--prio>=0;){
                while(!list_empty(&qends->active[prio])){
@@ -459,13 +459,13 @@ int canque_set_filt(struct canque_edge_t *qedge,
        can_spin_irqflags_t flags;
 
        can_spin_lock_irqsave(&qedge->fifo.fifo_lock,flags);
-       
+
        if(!(filtflags&MSG_PROCESSLOCAL) && (processlocal<2))
                filtflags |= MSG_LOCAL_MASK;
-       
+
        qedge->filtid=canque_filtid2internal(filtid, filtflags);
        qedge->filtmask=canque_filtid2internal(filtmask, filtflags>>MSG_FILT_MASK_SHIFT);
-       
+
        if(canque_fifo_test_fl(&qedge->fifo,DEAD)) ret=-1;
        else ret=canque_fifo_test_and_set_fl(&qedge->fifo,BLOCK)?1:0;
 
@@ -476,7 +476,7 @@ int canque_set_filt(struct canque_edge_t *qedge,
        can_spin_lock_irqsave(&qedge->fifo.fifo_lock,flags);
        if(!ret) canque_fifo_clear_fl(&qedge->fifo,BLOCK);
        can_spin_unlock_irqrestore(&qedge->fifo.fifo_lock,flags);
-       
+
        DEBUGQUE("canque_set_filt for edge %d, ID %ld, mask %ld, flags %d returned %d\n",
                  qedge->edge_num,filtid,filtmask,filtflags,ret);
        return ret;
@@ -589,7 +589,7 @@ int canqueue_disconnect_edge(struct canque_edge_t *qedge)
                if(outends) can_spin_lock(&outends->ends_lock);
                flags=0;
        }
-       
+
        can_spin_lock(&qedge->fifo.fifo_lock);
        if(atomic_read(&qedge->edge_used)==0) {
                if(qedge->outends){
@@ -619,7 +619,7 @@ int canqueue_disconnect_edge(struct canque_edge_t *qedge)
 
 
 /**
- * canqueue_block_inlist - block slot allocation of all outgoing edges of specified ends  
+ * canqueue_block_inlist - block slot allocation of all outgoing edges of specified ends
  * @qends: pointer to ends structure
  */
 void canqueue_block_inlist(struct canque_ends_t *qends)
@@ -633,7 +633,7 @@ void canqueue_block_inlist(struct canque_ends_t *qends)
 
 
 /**
- * canqueue_block_outlist - block slot allocation of all incoming edges of specified ends  
+ * canqueue_block_outlist - block slot allocation of all incoming edges of specified ends
  * @qends: pointer to ends structure
  */
 void canqueue_block_outlist(struct canque_ends_t *qends)
@@ -658,7 +658,7 @@ void canqueue_block_outlist(struct canque_ends_t *qends)
 int canqueue_ends_kill_inlist(struct canque_ends_t *qends, int send_rest)
 {
        struct canque_edge_t *edge;
-       
+
        canque_for_each_inedge(qends, edge){
                canque_notify_bothends(edge, CANQUEUE_NOTIFY_DEAD_WANTED);
                if(send_rest){
@@ -686,7 +686,7 @@ int canqueue_ends_kill_inlist(struct canque_ends_t *qends, int send_rest)
 int canqueue_ends_kill_outlist(struct canque_ends_t *qends)
 {
        struct canque_edge_t *edge;
-       
+
        canque_for_each_outedge(qends, edge){
                canque_notify_bothends(edge, CANQUEUE_NOTIFY_DEAD_WANTED);
        }
@@ -718,10 +718,10 @@ int canqueue_ends_filt_conjuction(struct canque_ends_t *qends, struct canfilt_t
                        filtid = edge->filtid;
                else
                        filtmask &= ~(filtid ^ edge->filtid);
-       
+
                filtmask &= edge->filtmask;
        }
-       
+
        filt->id = filtid & MSG_ID_MASK;
        filt->mask = filtmask & MSG_ID_MASK;
        filtid >>= 28;
@@ -746,7 +746,7 @@ int canqueue_ends_filt_conjuction(struct canque_ends_t *qends, struct canfilt_t
 int canqueue_ends_flush_inlist(struct canque_ends_t *qends)
 {
        struct canque_edge_t *edge;
-       
+
        canque_for_each_inedge(qends, edge){
                canque_flush(edge);
        }
@@ -763,7 +763,7 @@ int canqueue_ends_flush_inlist(struct canque_ends_t *qends)
 int canqueue_ends_flush_outlist(struct canque_ends_t *qends)
 {
        struct canque_edge_t *edge;
-       
+
        canque_for_each_outedge(qends, edge){
                canque_flush(edge);
        }

diff --git a/lincan/src/cc_can104.c b/lincan/src/cc_can104.c
index 93806caeeae7db94d6d2e7e5dca0982fd32a331e..94a0dfecfaf04436a09f9eea59aa62d46e5c01f8 100644 (file)
--- a/lincan/src/cc_can104.c
+++ b/lincan/src/cc_can104.c
@@ -52,7 +52,7 @@
  *
  * The function template_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
- * will have to add the code to reserve this memory as well. 
+ * will have to add the code to reserve this memory as well.
  * %IO_RANGE is the io-memory range that gets reserved, please adjust according
  * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
  * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
@@ -93,8 +93,8 @@ int cc104_release_io(struct candevice_t *candev)
  * template_reset - hardware reset routine
  * @candev: Pointer to candevice/board structure
  *
- * The function template_reset() is used to give a hardware reset. This is 
- * rather hardware specific so I haven't included example code. Don't forget to 
+ * The function template_reset() is used to give a hardware reset. This is
+ * rather hardware specific so I haven't included example code. Don't forget to
  * check the reset status of the chip before returning.
  * Return Value: The function returns zero on success or %-ENODEV on failure
  * File: src/template.c
@@ -122,7 +122,7 @@ int cc104_reset(struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/template.c
  */
-int cc104_init_hw_data(struct candevice_t *candev) 
+int cc104_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=RESET_ADDR;
        candev->nr_82527_chips=0;
@@ -156,7 +156,7 @@ int cc104_init_hw_data(struct candevice_t *candev)
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
- * The entry @int_bus_reg holds hardware specific options for the Bus 
+ * The entry @int_bus_reg holds hardware specific options for the Bus
  * Configuration register. Options defined in the %i82527.h file:
  * %iBUS_DR0, %iBUS_DR1, %iBUS_DT1, %iBUS_POL, %iBUS_CBY.
  * Return Value: The function always returns zero
@@ -185,7 +185,7 @@ int cc104_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry @obj_base_addr represents the first memory address of the message 
+ * The entry @obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 @obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -195,7 +195,7 @@ int cc104_init_chip_data(struct candevice_t *candev, int chipnr)
 int cc104_init_obj_data(struct canchip_t *chip, int objnr)
 {
        chip->msgobj[objnr]->obj_base_addr=chip->chip_base_addr;
-       
+
        return 0;
 }
 
@@ -203,10 +203,10 @@ int cc104_init_obj_data(struct canchip_t *chip, int objnr)
  * template_program_irq - program interrupts
  * @candev: Pointer to candevice/board structure
  *
- * The function template_program_irq() is used for hardware that uses 
+ * The function template_program_irq() is used for hardware that uses
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
- * leave this function unedited. Again this function is hardware specific so 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
  * File: src/template.c

diff --git a/lincan/src/close.c b/lincan/src/close.c
index a69247c6bc14cca1e234c68c0d6cf89601002aa7..2e0090d83aae8143ef5cd99e5e13b02482112d9f 100644 (file)
--- a/lincan/src/close.c
+++ b/lincan/src/close.c
@@ -48,15 +48,15 @@ int can_close(struct inode *inode, struct file *file)
        struct canque_ends_t *qends;
        struct msgobj_t *obj;
        can_spin_irqflags_t iflags;
-       
+
        if(!canuser || (canuser->magic != CAN_USER_MAGIC)){
                CANMSG("can_close: bad canuser magic\n");
                return -ENODEV;
        }
-       
+
        obj = canuser->msgobj;
        qends = canuser->qends;
-       
+
     #ifdef CAN_ENABLE_KERN_FASYNC
 
        can_fasync(-1, file, 0);
@@ -76,7 +76,7 @@ int can_close(struct inode *inode, struct file *file)
                can_msgobj_clear_fl(obj,OPENED);
        };
        can_spin_unlock_irqrestore(&canuser_manipulation_lock, iflags);
-       
+
     #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,50))
        MOD_DEC_USE_COUNT;
     #endif

diff --git a/lincan/src/close_rtl.c b/lincan/src/close_rtl.c
index b72b3d881861727f303428e377f7de7ba5f70c0a..ddf06357d50149df07d9da15c7fd2e4387d3a0d7 100644 (file)
--- a/lincan/src/close_rtl.c
+++ b/lincan/src/close_rtl.c
@@ -80,7 +80,7 @@ int can_release_rtl_posix(struct rtl_file *fptr)
        struct canuser_t *canuser =
                (struct canuser_t *)can_get_rtl_file_private_data(fptr);
        int ret;
-       
+
        if(!canuser || (canuser->magic != CAN_USER_MAGIC)){
                CANMSG("can_release_rtl_posix: bad canuser magic\n");
                return -ENODEV;
@@ -89,7 +89,7 @@ int can_release_rtl_posix(struct rtl_file *fptr)
        ret=can_release_rtl_common(canuser, fptr->f_flags);
 
        rt_free(canuser);
-       
+
        return ret;
 }
 

diff --git a/lincan/src/eb8245.c b/lincan/src/eb8245.c
index 1ff89a4b5c661973ebf6d76f033eba24695c99ec..b59babc0791876017fb1ef26d9ee1322583024e2 100644 (file)
--- a/lincan/src/eb8245.c
+++ b/lincan/src/eb8245.c
@@ -53,7 +53,7 @@
  *
  * The function eb8245_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
- * will have to add the code to reserve this memory as well. 
+ * will have to add the code to reserve this memory as well.
  * %IO_RANGE is the io-memory range that gets reserved, please adjust according
  * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
  * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
@@ -63,7 +63,7 @@
 int eb8245_request_io(struct candevice_t *candev)
 {
         can_ioptr_t remap_addr;
-       
+
        if (!can_request_mem_region(candev->io_addr,IO_RANGE,DEVICE_NAME " - eb8245")) {
                CANMSG("Unable to request IO-memory: 0x%lx\n",candev->io_addr);
                return -ENODEV;
@@ -72,7 +72,7 @@ int eb8245_request_io(struct candevice_t *candev)
                CANMSG("Unable to access I/O memory at: 0x%lx\n", candev->io_addr);
                can_release_mem_region(candev->io_addr,IO_RANGE);
                return -ENODEV;
-       
+
        }
        can_base_addr_fixup(candev, remap_addr);
        DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr, candev->io_addr + IO_RANGE - 1);
@@ -104,8 +104,8 @@ int eb8245_release_io(struct candevice_t *candev)
  * eb8245_reset - hardware reset routine
  * @candev: Pointer to candevice/board structure
  *
- * The function eb8245_reset() is used to give a hardware reset. This is 
- * rather hardware specific so I haven't included example code. Don't forget to 
+ * The function eb8245_reset() is used to give a hardware reset. This is
+ * rather hardware specific so I haven't included example code. Don't forget to
  * check the reset status of the chip before returning.
  * Return Value: The function returns zero on success or %-ENODEV on failure
  * File: src/eb8245.c
@@ -115,10 +115,10 @@ int eb8245_reset(struct candevice_t *candev)
        int i;
        struct canchip_t *chip=candev->chip[0];
        unsigned cdr;
-       
+
        eb8245_write_register(sjaMOD_RM, chip->chip_base_addr+SJAMOD);
        udelay(1000);
-       
+
        cdr=eb8245_read_register(chip->chip_base_addr+SJACDR);
        eb8245_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
 
@@ -136,7 +136,7 @@ int eb8245_reset(struct candevice_t *candev)
        eb8245_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
 
        eb8245_write_register(0, chip->chip_base_addr+SJAIER);
-       
+
        return 0;
 }
 
@@ -158,7 +158,7 @@ int eb8245_reset(struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/eb8245.c
  */
-int eb8245_init_hw_data(struct candevice_t *candev) 
+int eb8245_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=RESET_ADDR;
        candev->nr_82527_chips=0;
@@ -192,7 +192,7 @@ int eb8245_init_hw_data(struct candevice_t *candev)
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
- * The entry @int_bus_reg holds hardware specific options for the Bus 
+ * The entry @int_bus_reg holds hardware specific options for the Bus
  * Configuration register. Options defined in the %i82527.h file:
  * %iBUS_DR0, %iBUS_DR1, %iBUS_DT1, %iBUS_POL, %iBUS_CBY.
  * The entry @int_cpu_reg holds hardware specific options for the cpu interface
@@ -226,7 +226,7 @@ int eb8245_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry @obj_base_addr represents the first memory address of the message 
+ * The entry @obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 @obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -243,10 +243,10 @@ int eb8245_init_obj_data(struct canchip_t *chip, int objnr)
  * eb8245_program_irq - program interrupts
  * @candev: Pointer to candevice/board structure
  *
- * The function eb8245_program_irq() is used for hardware that uses 
+ * The function eb8245_program_irq() is used for hardware that uses
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
- * leave this function unedited. Again this function is hardware specific so 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
  * File: src/eb8245.c

diff --git a/lincan/src/ems_cpcpci.c b/lincan/src/ems_cpcpci.c
index 55c4d983aea67d6fbd4db018eeb0f24998513482..f867175a47f9ff929a4eb23be0f96411622afe67 100644 (file)
--- a/lincan/src/ems_cpcpci.c
+++ b/lincan/src/ems_cpcpci.c
@@ -56,7 +56,7 @@
  * each register occupies 4 bytes
  */
 
-/*PSB4610 PITA-2 bridge control registers*/   
+/*PSB4610 PITA-2 bridge control registers*/
 #define PITA2_ICR  0x00  /* Interrupt Control Register */
 #define   PITA2_ICR_INT0    0x00000002 /* [RC] INT0 Active/Clear */
 #define   PITA2_ICR_GP0_INT 0x00000004 /* [RC] GP0 Interrupt */
@@ -81,15 +81,15 @@
 
 /*
 
-The board configuration is probably following: 
-" RX1 is connected to ground. 
-" TX1 is not connected. 
-" CLKO is not connected. 
-" Setting the OCR register to 0xDA is a good idea. 
-  This means  normal output mode , push-pull and the correct polarity. 
-" In the CDR register, you should set CBP to 1. 
+The board configuration is probably following:
+" RX1 is connected to ground.
+" TX1 is not connected.
+" CLKO is not connected.
+" Setting the OCR register to 0xDA is a good idea.
+  This means  normal output mode , push-pull and the correct polarity.
+" In the CDR register, you should set CBP to 1.
   You will probably also want to set the clock divider value to 7
-  (meaning direct oscillator output) because the second SJA1000 chip 
+  (meaning direct oscillator output) because the second SJA1000 chip
   is driven by the first one CLKOUT output.
 
 */
@@ -131,7 +131,7 @@ int ems_cpcpci_request_io(struct candevice_t *candev)
     #endif /*(LINUX_VERSION_CODE > KERNEL_VERSION(2,4,21))*/
 
        pita2_addr=pci_resource_start(candev->sysdevptr.pcidev,0);
-       if (!(candev->aux_base_addr = ioremap(pita2_addr, 
+       if (!(candev->aux_base_addr = ioremap(pita2_addr,
              pci_resource_len(candev->sysdevptr.pcidev,0)))) {
                CANMSG("Unable to access I/O memory at: 0x%lx\n", pita2_addr);
                goto error_ioremap_pita2;
@@ -146,9 +146,9 @@ int ems_cpcpci_request_io(struct candevice_t *candev)
 
        candev->io_addr=io_addr;
        candev->res_addr=pita2_addr;
-       
-       /* 
-        * this is redundant with chip initialization, but remap address 
+
+       /*
+        * this is redundant with chip initialization, but remap address
         * can change when resources are temporarily released
         */
        for(i=0;i<candev->nr_all_chips;i++) {
@@ -177,7 +177,7 @@ int ems_cpcpci_request_io(struct candevice_t *candev)
     #else /*(LINUX_VERSION_CODE > KERNEL_VERSION(2,4,21))*/
        pci_release_regions(candev->sysdevptr.pcidev);
     #endif /*(LINUX_VERSION_CODE > KERNEL_VERSION(2,4,21))*/
-       
+
        return -ENODEV;
 }
 
@@ -202,7 +202,7 @@ void ems_cpcpci_write_register(unsigned data, can_ioptr_t address)
 {
        address += ((can_ioptr2ulong(address)&(EMS_CPCPCI_BYTES_PER_CIRCUIT-1))
                                             *(EMS_CPCPCI_BYTES_PER_REG-1));
-       can_writeb(data,address); 
+       can_writeb(data,address);
 }
 
 unsigned ems_cpcpci_read_register(can_ioptr_t address)
@@ -222,7 +222,7 @@ int ems_cpcpci_irq_handler(int irq, struct canchip_t *chip)
 
        icr=can_readl(candev->aux_base_addr + PITA2_ICR);
        if(!(icr & PITA2_ICR_INT0)) return CANCHIP_IRQ_NONE;
-       
+
        /* correct way to handle interrupts from all chips connected to the one PITA-2 */
        do {
                can_writel(PITA2_ICR_INT0_En | PITA2_ICR_INT0, candev->aux_base_addr + PITA2_ICR);
@@ -275,15 +275,15 @@ int ems_cpcpci_reset(struct candevice_t *candev)
                ems_cpcpci_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
 
                ems_cpcpci_write_register(0, chip->chip_base_addr+SJAIER);
-               
+
                ems_cpcpci_read_register(chip->chip_base_addr+SJAIR);
        }
-       
+
 
        ems_cpcpci_connect_irq(candev);
 
        return 0;
-}      
+}
 
 int ems_cpcpci_init_hw_data(struct candevice_t *candev)
 {
@@ -294,14 +294,14 @@ int ems_cpcpci_init_hw_data(struct candevice_t *candev)
        pcidev = can_pci_get_next_untaken_device(EMS_CPCPCI_PCICAN_VENDOR, EMS_CPCPCI_PCICAN_ID);
        if(pcidev == NULL)
                return -ENODEV;
-       
+
        if (pci_enable_device (pcidev)){
                printk(KERN_CRIT "Setup of EMS_CPCPCI failed\n");
                can_pci_dev_put(pcidev);
                return -EIO;
        }
        candev->sysdevptr.pcidev=pcidev;
-       
+
        for(i=0;i<2;i++){
                if(!(pci_resource_flags(pcidev,0)&IORESOURCE_MEM)){
                        printk(KERN_CRIT "EMS_CPCPCI region %d is not memory\n",i);
@@ -324,17 +324,17 @@ int ems_cpcpci_init_hw_data(struct candevice_t *candev)
          * 0x600 the second SJA1000
          * each register occupies 4 bytes
          */
-       
+
        /*candev->flags |= CANDEV_PROGRAMMABLE_IRQ;*/
-       
+
        for(l=0,i=0;i<4;i++){
                l<<=8;
                l|=can_readb(candev->dev_base_addr + i*4);
        }
        i=can_readb(candev->dev_base_addr + i*5);
-       
+
        CANMSG("EMS CPC-PCI check value %04lx, ID %d\n", l, i);
-       
+
        if(l!=0x55aa01cb) {
                CANMSG("EMS CPC-PCI unexpected check values\n");
        }
@@ -362,7 +362,7 @@ int ems_cpcpci_init_chip_data(struct candevice_t *candev, int chipnr)
 
        /* initialize common routines for the SJA1000 chip */
        sja1000p_fill_chipspecops(candev->chip[chipnr]);
-       
+
        /* special version of the IRQ handler is required for CPC-PCI board */
        candev->chip[chipnr]->chipspecops->irq_handler=ems_cpcpci_irq_handler;
 
@@ -381,7 +381,7 @@ int ems_cpcpci_init_chip_data(struct candevice_t *candev, int chipnr)
        candev->chip[chipnr]->flags |= CHIP_IRQ_PCI;
 
        return 0;
-}      
+}
 
 int ems_cpcpci_init_obj_data(struct canchip_t *chip, int objnr)
 {

diff --git a/lincan/src/esdpci200.c b/lincan/src/esdpci200.c
index 292ae9071b6820433ac219de25afd54361ca04b0..09c44fafdc7bcbd7d50fd8e53acf6b903a2eb364 100644 (file)
--- a/lincan/src/esdpci200.c
+++ b/lincan/src/esdpci200.c
@@ -59,14 +59,14 @@
 #define PLX9052_CNTRL  0x50    /* control register, for software reset */
 
 /* The ESD PCI/200 uses (per default) just LINTi1 (Local Interrupt 1)
- * on the PLX. This means that both CAN channels' (SJA1000's) /INT pins 
+ * on the PLX. This means that both CAN channels' (SJA1000's) /INT pins
  * are OR'ed to the LINTi1 pin (actually ANDed in the 74HC08 since both
  * the SJA1000's /INT pins and the LINTi1 pin are active low).
  *
  * The board does have an option to route the 2nd channel to LINTi2,
  * apparently just one or two resistors need to be added.
  *
- * LINTi2 is floating per default, so don't set its interrupt enable flag 
+ * LINTi2 is floating per default, so don't set its interrupt enable flag
  * 'PLX9052_INTCSR_LI2EN', it'll just interrupt all the time.
  */
 #define PLX9052_INTCSR_LI1EN 0x00000001 /* Local Interrupt 1 enable */
@@ -81,7 +81,7 @@
 
 // Standard value: Pushpull  (OCTP1|OCTN1|OCPOL1|OCTP0|OCTN0|OCM1)
 #define ESDPCI200_OCR_DEFAULT_STD 0xFA
-/* Setting the OCR register to 0xFA is a good idea. 
+/* Setting the OCR register to 0xFA is a good idea.
    This means  normal output mode , push-pull and the correct polarity. */
 
 
@@ -113,7 +113,7 @@ void esdpci200_connect_irq(struct candevice_t *candev)
         /* enable interrupts for the SJA1000's, enable PCI interrupts */
        outl(   PLX9052_INTCSR_LI1EN | PLX9052_INTCSR_PIEN,
                candev->res_addr+PLX9052_INTCSR);
-       DEBUGMSG("enabled interrupts on the PLX\n"); 
+       DEBUGMSG("enabled interrupts on the PLX\n");
 }
 
 int esdpci200_irq_handler(int irq, struct canchip_t *chip)
@@ -126,8 +126,8 @@ int esdpci200_irq_handler(int irq, struct canchip_t *chip)
        //DEBUGMSG("Starting to handle an IRQ\n");
        it_reg = inl(candev->res_addr+PLX9052_INTCSR);
        rmb();
-       if((it_reg & (PLX9052_INTCSR_LI1S | PLX9052_INTCSR_LI1EN) ) 
-               == (PLX9052_INTCSR_LI1S | PLX9052_INTCSR_LI1EN) ) 
+       if((it_reg & (PLX9052_INTCSR_LI1S | PLX9052_INTCSR_LI1EN) )
+               == (PLX9052_INTCSR_LI1S | PLX9052_INTCSR_LI1EN) )
        {       /*interrupt enabled and active */
                int chipnum;
                for(chipnum=0; chipnum < candev->nr_sja1000_chips; chipnum++)
@@ -144,7 +144,7 @@ int esdpci200_irq_handler(int irq, struct canchip_t *chip)
                        }
                }
                if( retcode != CANCHIP_IRQ_HANDLED )
-               {/* None of the chips felt they were responsible for this IRQ... 
+               {/* None of the chips felt they were responsible for this IRQ...
                    so it appears we have problems with the IRQ */
                        it_reg &= ~(PLX9052_INTCSR_LI1EN);
                        //Either we have a problem with IRQ malfunctions, or our IRQ is shared with some other device.
@@ -190,7 +190,7 @@ int esdpci200_request_io(struct candevice_t *candev)
        /*MEM window for SJA1000 chips*/
        bar2_addr = pci_resource_start(pcidev,2);
        candev->io_addr = bar2_addr;
-       if( ! (remap_addr=ioremap(bar2_addr, 
+       if( ! (remap_addr=ioremap(bar2_addr,
                pci_resource_len(pcidev,2)))) /*MEM window for SJA1000 chips*/
        {
                CANMSG("Unable to access I/O memory at: 0x%lx\n", (unsigned long)bar2_addr);
@@ -198,7 +198,7 @@ int esdpci200_request_io(struct candevice_t *candev)
        }
 
        can_base_addr_fixup(candev, remap_addr);
-       CANMSG("esdpci200_sja IO-memory: 0x%lx - 0x%lx (VMA 0x%lx)\n", 
+       CANMSG("esdpci200_sja IO-memory: 0x%lx - 0x%lx (VMA 0x%lx)\n",
                (unsigned long) bar2_addr,
                (unsigned long) (bar2_addr + pci_resource_len(pcidev,2) - 1),
                (long) remap_addr);
@@ -278,15 +278,15 @@ int esdpci200_reset(struct candevice_t *candev)
                esdpci200_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
 
                esdpci200_write_register(0, chip->chip_base_addr+SJAIER);
-               
+
                esdpci200_read_register(chip->chip_base_addr+SJAIR);
        }
-       
+
 
        esdpci200_connect_irq(candev);
 
        return 0;
-}      
+}
 
 int esdpci200_init_hw_data(struct candevice_t *candev)
 {
@@ -330,7 +330,7 @@ int esdpci200_init_hw_data(struct candevice_t *candev)
 
        /* Physical address of SJA1000 window, stored for debugging only */
        candev->io_addr = pci_resource_start(pcidev,2);
-       
+
        candev->aux_base_addr=NULL; /* mapped dynamically in esdpci200_request_io() */
        candev->dev_base_addr=NULL; /* mapped dynamically in esdpci200_request_io() */
        /*candev->flags |= CANDEV_PROGRAMMABLE_IRQ;*/
@@ -352,7 +352,7 @@ int esdpci200_init_chip_data(struct candevice_t *candev, int chipnr)
 {
 
        if(candev->sysdevptr.pcidev==NULL)
-               return -ENODEV; 
+               return -ENODEV;
 
        CANMSG("initializing esdpci200 chip operations\n");
 
@@ -372,13 +372,13 @@ int esdpci200_init_chip_data(struct candevice_t *candev, int chipnr)
        candev->chip[chipnr]->chip_irq=candev->sysdevptr.pcidev->irq;
        candev->chip[chipnr]->flags |= CHIP_IRQ_PCI;
        if( chipnr > 0 ) /* only one IRQ used for both channels.
-                           CHIP_IRQ_CUSTOM req'd for RTAI, since 
-                           registering two handlers for the same IRQ 
+                           CHIP_IRQ_CUSTOM req'd for RTAI, since
+                           registering two handlers for the same IRQ
                            returns an error */
                candev->chip[chipnr]->flags |= CHIP_IRQ_CUSTOM;
 
        return 0;
-}      
+}
 
 int esdpci200_init_obj_data(struct canchip_t *chip, int objnr)
 {

diff --git a/lincan/src/fasync.c b/lincan/src/fasync.c
index 17734244056e4b57a7171eea624ba9c2ff8b6f90..abeb9fcff97507f6d98278b43497d393ca5d7e83 100644 (file)
--- a/lincan/src/fasync.c
+++ b/lincan/src/fasync.c
@@ -42,15 +42,15 @@
 int can_fasync(int fd, struct file *file, int on)
 {
        int retval;
-       
+
        struct canuser_t *canuser = (struct canuser_t*)(file->private_data);
        struct canque_ends_t *qends;
-       
+
        if(!canuser || (canuser->magic != CAN_USER_MAGIC)){
                CANMSG("can_close: bad canuser magic\n");
                return -ENODEV;
        }
-       
+
        qends = canuser->qends;
 
        retval = fasync_helper(fd, file, on, &qends->endinfo.fileinfo.fasync);

diff --git a/lincan/src/gensja1000io.c b/lincan/src/gensja1000io.c
index e498b97005aa4aaaaf39414bcbc0c659531eb490..8ba71a22a722d8b253195b0ddee27def627a49cd 100644 (file)
--- a/lincan/src/gensja1000io.c
+++ b/lincan/src/gensja1000io.c
@@ -52,7 +52,7 @@
  *
  * The function gensja1000io_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
- * will have to add the code to reserve this memory as well. 
+ * will have to add the code to reserve this memory as well.
  * %IO_RANGE is the io-memory range that gets reserved, please adjust according
  * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
  * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
@@ -93,8 +93,8 @@ int gensja1000io_release_io(struct candevice_t *candev)
  * gensja1000io_reset - hardware reset routine
  * @candev: Pointer to candevice/board structure
  *
- * The function gensja1000io_reset() is used to give a hardware reset. This is 
- * rather hardware specific so I haven't included example code. Don't forget to 
+ * The function gensja1000io_reset() is used to give a hardware reset. This is
+ * rather hardware specific so I haven't included example code. Don't forget to
  * check the reset status of the chip before returning.
  * Return Value: The function returns zero on success or %-ENODEV on failure
  * File: src/gensja1000io.c
@@ -104,10 +104,10 @@ int gensja1000io_reset(struct candevice_t *candev)
        int i;
        struct canchip_t *chip=candev->chip[0];
        unsigned cdr;
-       
+
        gensja1000io_write_register(sjaMOD_RM, chip->chip_base_addr+SJAMOD);
        udelay(1000);
-       
+
        cdr=gensja1000io_read_register(chip->chip_base_addr+SJACDR);
        gensja1000io_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
 
@@ -125,7 +125,7 @@ int gensja1000io_reset(struct candevice_t *candev)
        gensja1000io_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
 
        gensja1000io_write_register(0, chip->chip_base_addr+SJAIER);
-       
+
        return 0;
 }
 
@@ -147,7 +147,7 @@ int gensja1000io_reset(struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/gensja1000io.c
  */
-int gensja1000io_init_hw_data(struct candevice_t *candev) 
+int gensja1000io_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=RESET_ADDR;
        candev->nr_82527_chips=0;
@@ -181,7 +181,7 @@ int gensja1000io_init_hw_data(struct candevice_t *candev)
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
- * The entry @int_bus_reg holds hardware specific options for the Bus 
+ * The entry @int_bus_reg holds hardware specific options for the Bus
  * Configuration register. Options defined in the %i82527.h file:
  * %iBUS_DR0, %iBUS_DR1, %iBUS_DT1, %iBUS_POL, %iBUS_CBY.
  * The entry @int_cpu_reg holds hardware specific options for the cpu interface
@@ -216,7 +216,7 @@ int gensja1000io_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry @obj_base_addr represents the first memory address of the message 
+ * The entry @obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 @obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -233,10 +233,10 @@ int gensja1000io_init_obj_data(struct canchip_t *chip, int objnr)
  * gensja1000io_program_irq - program interrupts
  * @candev: Pointer to candevice/board structure
  *
- * The function gensja1000io_program_irq() is used for hardware that uses 
+ * The function gensja1000io_program_irq() is used for hardware that uses
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
- * leave this function unedited. Again this function is hardware specific so 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
  * File: src/gensja1000io.c

diff --git a/lincan/src/gensja1000mm.c b/lincan/src/gensja1000mm.c
index 7f7b38850a475a14a45043b08a2cce48fbb9aac8..426f65e38e290e7ba1e04a54585415d0b677b21a 100644 (file)
--- a/lincan/src/gensja1000mm.c
+++ b/lincan/src/gensja1000mm.c
@@ -52,7 +52,7 @@
  *
  * The function gensja1000mm_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
- * will have to add the code to reserve this memory as well. 
+ * will have to add the code to reserve this memory as well.
  * %IO_RANGE is the io-memory range that gets reserved, please adjust according
  * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
  * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
@@ -62,7 +62,7 @@
 int gensja1000mm_request_io(struct candevice_t *candev)
 {
         can_ioptr_t remap_addr;
-       
+
        if (!can_request_mem_region(candev->io_addr,IO_RANGE,DEVICE_NAME)) {
                CANMSG("Unable to request IO-memory: 0x%lx\n",candev->io_addr);
                return -ENODEV;
@@ -71,7 +71,7 @@ int gensja1000mm_request_io(struct candevice_t *candev)
                CANMSG("Unable to access I/O memory at: 0x%lx\n", candev->io_addr);
                can_release_mem_region(candev->io_addr,IO_RANGE);
                return -ENODEV;
-       
+
        }
        can_base_addr_fixup(candev, remap_addr);
        DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr, candev->io_addr + IO_RANGE - 1);
@@ -103,8 +103,8 @@ int gensja1000mm_release_io(struct candevice_t *candev)
  * gensja1000mm_reset - hardware reset routine
  * @candev: Pointer to candevice/board structure
  *
- * The function gensja1000mm_reset() is used to give a hardware reset. This is 
- * rather hardware specific so I haven't included example code. Don't forget to 
+ * The function gensja1000mm_reset() is used to give a hardware reset. This is
+ * rather hardware specific so I haven't included example code. Don't forget to
  * check the reset status of the chip before returning.
  * Return Value: The function returns zero on success or %-ENODEV on failure
  * File: src/gensja1000mm.c
@@ -114,10 +114,10 @@ int gensja1000mm_reset(struct candevice_t *candev)
        int i;
        struct canchip_t *chip=candev->chip[0];
        unsigned cdr;
-       
+
        gensja1000mm_write_register(sjaMOD_RM, chip->chip_base_addr+SJAMOD);
        udelay(1000);
-       
+
        cdr=gensja1000mm_read_register(chip->chip_base_addr+SJACDR);
        gensja1000mm_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
 
@@ -135,7 +135,7 @@ int gensja1000mm_reset(struct candevice_t *candev)
        gensja1000mm_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
 
        gensja1000mm_write_register(0, chip->chip_base_addr+SJAIER);
-       
+
        return 0;
 }
 
@@ -157,7 +157,7 @@ int gensja1000mm_reset(struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/gensja1000mm.c
  */
-int gensja1000mm_init_hw_data(struct candevice_t *candev) 
+int gensja1000mm_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=RESET_ADDR;
        candev->nr_82527_chips=0;
@@ -191,7 +191,7 @@ int gensja1000mm_init_hw_data(struct candevice_t *candev)
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
- * The entry @int_bus_reg holds hardware specific options for the Bus 
+ * The entry @int_bus_reg holds hardware specific options for the Bus
  * Configuration register. Options defined in the %i82527.h file:
  * %iBUS_DR0, %iBUS_DR1, %iBUS_DT1, %iBUS_POL, %iBUS_CBY.
  * The entry @int_cpu_reg holds hardware specific options for the cpu interface
@@ -226,7 +226,7 @@ int gensja1000mm_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry @obj_base_addr represents the first memory address of the message 
+ * The entry @obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 @obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -243,10 +243,10 @@ int gensja1000mm_init_obj_data(struct canchip_t *chip, int objnr)
  * gensja1000mm_program_irq - program interrupts
  * @candev: Pointer to candevice/board structure
  *
- * The function gensja1000mm_program_irq() is used for hardware that uses 
+ * The function gensja1000mm_program_irq() is used for hardware that uses
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
- * leave this function unedited. Again this function is hardware specific so 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
  * File: src/gensja1000mm.c

diff --git a/lincan/src/hcan2.c b/lincan/src/hcan2.c
index 23d15ab84149f29300914603b6375fc3df2b04f9..f06fdd174567e6dcc21b6e65320906241e3bd7a9 100644 (file)
--- a/lincan/src/hcan2.c
+++ b/lincan/src/hcan2.c
@@ -76,7 +76,7 @@ uint16_t IRQs = ~(HCAN2_IRR_DFRI + HCAN2_IRR_MBEI + HCAN2_IRR_BOI + HCAN2_IRR_EP
 int hcan2_chip_config(struct canchip_t *chip)
 {
        DEBUGMSG("Configuring chip...\n");
-       
+
        if (hcan2_enable_configuration(chip))
                return -ENODEV;
 
@@ -236,7 +236,7 @@ int hcan2_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw, int sa
        bcr1 = (((tseg1 - 1) & 0x000f) << 12) + (((tseg2 - 1) & 0x0007) << 8) + ((sjw & 0x0003) << 4);
        bcr0 = (best_brp - 1) & 0x00ff;
 
-       hcan2_set_btregs(chip, bcr0, bcr1);     
+       hcan2_set_btregs(chip, bcr0, bcr1);
 
        hcan2_disable_configuration(chip);
 
@@ -254,7 +254,7 @@ int hcan2_set_btregs(struct canchip_t *chip, unsigned short bcr0, unsigned short
 
        can_write_reg_w(chip, bcr1, HCAN2_BCR1);
        can_write_reg_w(chip, bcr0, HCAN2_BCR0);
-       
+
 /*     DEBUGMSG("BCR0 and BCR1 successfully set.\n"); */
        return 0;
 }
@@ -289,8 +289,8 @@ int hcan2_stop_chip(struct canchip_t *chip)
 int hcan2_attach_to_chip(struct canchip_t *chip)
 {
 /*     DEBUGMSG("Attaching to chip %d.\n", chip->chip_idx); */
-       
-       /* initialize chip */   
+
+       /* initialize chip */
 
        if (hcan2_enable_configuration(chip))
                return -ENODEV;
@@ -318,9 +318,9 @@ int hcan2_release_chip(struct canchip_t *chip)
 {
        hcan2_stop_chip(chip);
        can_disable_irq(chip->chip_irq);
-       
+
        hcan2_clear_objects(chip);
-       
+
        DEBUGMSG("Chip released [%02d]\n", chip->chip_idx);
        return 0;
 }
@@ -332,10 +332,10 @@ int hcan2_standard_mask(struct canchip_t *chip, unsigned short code, unsigned sh
        struct msgobj_t * obj;
        int obj_idx = (int) (chip->chip_data);
 
-       if (code & 0x1ffff800)  
+       if (code & 0x1ffff800)
            return hcan2_extended_mask(chip, code, mask);
 
-       
+
        if (obj_idx > 0 && obj_idx <= 32)
            obj = chip->msgobj[obj_idx - 1];
        else
@@ -347,7 +347,7 @@ int hcan2_standard_mask(struct canchip_t *chip, unsigned short code, unsigned sh
        ctrl0 = ((code & 0x07ff) << 4);
        lafm0 = ((mask & 0x07ff) << 4);
        lafm0 |= 0x0003;                /* ignore Ext ID 17:16  */
-       
+
        can_write_reg_w(chip, ctrl0, (int) obj->obj_base_addr + HCAN2_MB_CTRL0);
        can_write_reg_w(chip, 0x0000, (int) obj->obj_base_addr + HCAN2_MB_CTRL1);
        can_write_reg_w(chip, lafm0, (int) obj->obj_base_addr + HCAN2_MB_MASK);
@@ -364,7 +364,7 @@ int hcan2_extended_mask(struct canchip_t *chip, unsigned long code, unsigned lon
        struct msgobj_t * obj;
 
        int obj_idx = (int) (chip->chip_data);
-       
+
        if (obj_idx > 0 && obj_idx <= 32)
            obj = chip->msgobj[obj_idx - 1];
        else
@@ -380,14 +380,14 @@ int hcan2_extended_mask(struct canchip_t *chip, unsigned long code, unsigned lon
        lafm0 = ((mask & 0x1ffc0000) >> 14);
        lafm0 |=((mask & 0x00030000) >> 16);
        lafm1 =  (mask & 0x0000ffff);
-       
+
        can_write_reg_w(chip, ctrl0, (int) obj->obj_base_addr + HCAN2_MB_CTRL0);
        can_write_reg_w(chip, ctrl1, (int) obj->obj_base_addr + HCAN2_MB_CTRL1);
        can_write_reg_w(chip, lafm0, (int) obj->obj_base_addr + HCAN2_MB_MASK);
        can_write_reg_w(chip, lafm1, (int) obj->obj_base_addr + HCAN2_MB_MASK + 2);
-       
+
        DEBUGMSG("MB%02d: Set extended_mask [id:0x%08x, m:0x%08x]\n", obj_idx, (uint32_t)code, (uint32_t)mask);
-    
+
         return 0;
 }
 
@@ -400,7 +400,7 @@ int hcan2_pre_read_config(struct canchip_t *chip, struct msgobj_t *obj)
 
        /* clears mailbox and setup LFA to accept all Exted Messages */
        hcan2_setup_mbox4read(obj);
-       
+
        hcan2_disable_configuration(chip);
 
        return 0;
@@ -410,15 +410,15 @@ int hcan2_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj, struct
 {
        DEBUGMSG("Pre write config\n");
 
-       /* change Mailbox header only if neccessary */  
+       /* change Mailbox header only if neccessary */
        /* otherwise change only data */
        if (hcan2_compare_msg(obj, msg))
        {
                if (hcan2_enable_configuration(chip))
                        return -ENODEV;
-       
+
                hcan2_setup_mbox4write(obj, msg);
-               
+
                if (hcan2_disable_configuration(chip))
                        return -ENODEV;
        }
@@ -431,10 +431,10 @@ int hcan2_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj, struct
 int hcan2_send_msg(struct canchip_t *chip, struct msgobj_t *obj, struct canmsg_t *msg)
 {
        unsigned obj_bit;
-       int b_addr = ((obj->object - 1) / 16) * (-2); 
+       int b_addr = ((obj->object - 1) / 16) * (-2);
 
        obj_bit = (1 << ((obj->object - 1) % 16));
-       
+
 /*     CANMSG("Sending message [obj: %d]\n", obj->object - 1); */
 
        can_write_reg_w(chip, obj_bit, b_addr + HCAN2_TXPR0);
@@ -533,7 +533,7 @@ int hcan2_irq_handler(int irq, struct canchip_t *chip)
 
                        CANMSG("Warning: entering ERROR PASSIVE state\nTEC: %d REC: %d\n",
                                (uint16_t)((tecrec >> 8) & 0x00ff), (uint16_t)(tecrec & 0x00ff));
-                       
+
                        /* Show warning only */
 
                        /* reset flag - by writing '1' */
@@ -541,17 +541,17 @@ int hcan2_irq_handler(int irq, struct canchip_t *chip)
                }
 
                /* Message Overrun/Overwritten */
-               if (irq_reg & HCAN2_IRR_MOOI) { 
+               if (irq_reg & HCAN2_IRR_MOOI) {
                        /* put get Unread Message Status Register */
                        rxdf =  (can_read_reg_w(chip, HCAN2_UMSR1) << 16) + can_read_reg_w(chip, HCAN2_UMSR0);
 
                        /* find the message object */
                        for (idx = 0; (idx < chip->max_objects) && !(rxdf & (1<<idx)); idx++) { }
-                       
+
                        CANMSG("Error: MESSAGE OVERRUN/OVERWRITTEN [MB: %d]\n",idx);
-                       
+
                        /* notify only injured RXqueue-end */
-                       if (idx < chip->max_objects) 
+                       if (idx < chip->max_objects)
                                hcan2_notifyRXends(chip->msgobj[idx], CANQUEUE_NOTIFY_ERROR);
 
                        /* reset flag */
@@ -573,12 +573,12 @@ int hcan2_irq_handler(int irq, struct canchip_t *chip)
                        can_write_reg_w(chip, 0xffff, HCAN2_ABACK0);
                        can_write_reg_w(chip, 0xffff, HCAN2_ABACK1);
                        return CANCHIP_IRQ_HANDLED;
-                   } 
+                   }
 
-                   /* Clear TXACK flag */                  
+                   /* Clear TXACK flag */
                    can_write_reg_w(chip, 1 << (idx % 16), HCAN2_TXACK0 - 2 * (idx / 16));
 
-                   /* sends message */     
+                   /* sends message */
                    hcan2_wakeup_tx(chip, chip->msgobj[idx]);
                }
 
@@ -599,11 +599,11 @@ int hcan2_config_irqs(struct canchip_t *chip, short irqs)
        hcan2_clear_irq_flags(chip);
 
        can_write_reg_w(chip, irqs, HCAN2_IMR);
-       
+
        /* allow all mailboxes to generate IRQ */
        can_write_reg_w(chip, 0, HCAN2_MBIMR0);
        can_write_reg_w(chip, 0, HCAN2_MBIMR1);
-       
+
 /*     CANMSG("IRQ Mask set [0x%02x]\n", irqs); */
        return 0;
 }
@@ -633,7 +633,7 @@ int hcan2_check_tx_stat(struct canchip_t *chip)
 int hcan2_check_MB_tx_stat(struct canchip_t *chip, struct msgobj_t *obj)
 {
        /* Transmition is complete return 0 - no error */
-       
+
        /* MB1-MB15 are in CANTXPR0 and MB16-MB31 are in CANTXPR1
           CANTXPR0 = CANTXPR1 + 0x0002
           MB0 - receive only */
@@ -648,9 +648,9 @@ int hcan2_wakeup_tx(struct canchip_t *chip, struct msgobj_t *obj)
 
        if (obj->object == 1)   /* msgbox 0 cant transmit only receive ! */
            return -ENODEV;
-    
+
        can_preempt_disable();
-       
+
        can_msgobj_set_fl(obj,TX_REQUEST);
        if(!can_msgobj_test_and_set_fl(obj,TX_LOCK) &&
                !hcan2_check_MB_tx_stat(chip, obj))
@@ -658,7 +658,7 @@ int hcan2_wakeup_tx(struct canchip_t *chip, struct msgobj_t *obj)
                can_msgobj_clear_fl(obj,TX_REQUEST);
 
                hcan2_irq_write_handler(chip, obj);
-       
+
                can_msgobj_clear_fl(obj,TX_LOCK);
        }
        else
@@ -702,7 +702,7 @@ void hcan2_irq_read_handler(struct canchip_t *chip, struct msgobj_t *obj)
        unsigned ctrl0, ctrl2, data;
        unsigned long flag_addr;
        uint16_t mb_offset;
-       
+
 
        mb_offset = (int ) obj->obj_base_addr;
 
@@ -714,7 +714,7 @@ void hcan2_irq_read_handler(struct canchip_t *chip, struct msgobj_t *obj)
        obj->rx_msg.length = len = ctrl2 & HCAN2_MBCT2_DLC;
        obj->rx_msg.flags = (ctrl0 & HCAN2_MBCT0_RTR) ? MSG_RTR : 0;
        obj->rx_msg.cob = obj->object - 1;
-               
+
        /* get ID of received message */
        if (ctrl0 & HCAN2_MBCT0_IDE)
        {
@@ -741,7 +741,7 @@ void hcan2_irq_read_handler(struct canchip_t *chip, struct msgobj_t *obj)
         * HCAN2_RXPR1, HCAN2_RXPR0, HCAN2_RFPR1, HCAN2_RFPR0
         */
        flag_addr = HCAN2_RXPR0 - (int)((obj->object - 1) / 16) * 2;
-               
+
        /* Reset flag by writing 1 to its position */
        can_write_reg_w(chip, (1 << ((obj->object - 1) % 16)), flag_addr);
 
@@ -830,7 +830,7 @@ int hcan2_fill_chipspecops(struct canchip_t *chip)
        chip->max_objects = 32;
        chip->write_register = chip->hostdevice->hwspecops->write_register;
        chip->read_register = chip->hostdevice->hwspecops->read_register;
-       
+
        /*
        chip->flags;
        chip->baudrate;
@@ -862,7 +862,7 @@ int hcan2_reset_chip(struct canchip_t *chip)
         * 11 recessive bits to join CAN bus activity
         */
 
-       int i; 
+       int i;
        unsigned gsr_reset;
 
        DEBUGMSG("Resetting HCAN2 chip %d...\n", chip->chip_idx);
@@ -870,7 +870,7 @@ int hcan2_reset_chip(struct canchip_t *chip)
        /* send Reset Request */
        can_write_reg_w(chip, HCAN2_MCR_RESET, HCAN2_MCR );
 
-       /* Check hardware reset status */ 
+       /* Check hardware reset status */
        i = 0;
        gsr_reset = can_read_reg_w(chip, HCAN2_GSR) & HCAN2_GSR_RESET;
        while (!(gsr_reset) && ((i++) <= MAX_SETTING_WAIT_LOOPS))
@@ -977,14 +977,14 @@ void hcan2_clear_mbox(struct canchip_t *chip, int msgobj_idx)
 void hcan2_setup_mbox4write(struct msgobj_t * obj, struct canmsg_t * msg)
 {
        int mb_offset;
-       uint16_t ctrl0, ctrl1, ctrl2; 
+       uint16_t ctrl0, ctrl1, ctrl2;
 
        struct canchip_t * chip = obj->hostchip;
 
        DEBUGMSG("Change Header\n");
 
        mb_offset = (int) obj->obj_base_addr;
-       
+
        hcan2_setup_ctrl_regs(msg, &ctrl0, &ctrl1, &ctrl2);
 
        can_write_reg_w(chip, ctrl0, mb_offset + HCAN2_MB_CTRL0);
@@ -998,17 +998,17 @@ void hcan2_setup_mbox4write(struct msgobj_t * obj, struct canmsg_t * msg)
 void hcan2_setup_mbox4write_data(struct msgobj_t * obj, struct canmsg_t * msg)
 {
        int len,i, mb_offset;
-       uint16_t data; 
-       
+       uint16_t data;
+
        struct canchip_t * chip = obj->hostchip;
 
        DEBUGMSG("Change Data\n");
 
        mb_offset = (int) obj->obj_base_addr;
-       
+
        len = msg->length;
        if(len > CAN_MSG_LENGTH) len = CAN_MSG_LENGTH;
-       
+
        for (i = 0; i < len; i+=2)
        {
                data = (msg->data[i] << 8) + (i+1 < len ? msg->data[i+1] : 0);
@@ -1019,7 +1019,7 @@ void hcan2_setup_mbox4write_data(struct msgobj_t * obj, struct canmsg_t * msg)
 void hcan2_setup_mbox4read(struct msgobj_t * obj)
 {
        struct canchip_t * chip = obj->hostchip;
-    
+
        hcan2_clear_mbox(chip, obj->object - 1);
 
        // in structure chip->chip_data is Mailbox number
@@ -1064,7 +1064,7 @@ int hcan2_compare_msg(struct msgobj_t * obj, struct canmsg_t * msg)
        uint16_t ctrl0, ctrl1, ctrl2;
        uint16_t mb_offset;
        uint16_t c0,c1,c2;
-       
+
        struct canchip_t * chip = obj->hostchip;
 
        mb_offset = (int) obj->obj_base_addr;
@@ -1078,7 +1078,7 @@ int hcan2_compare_msg(struct msgobj_t * obj, struct canmsg_t * msg)
        /* if using EXT ID conpare also ctrl1 */
        if (msg->flags & MSG_EXT && ctrl1 ^ c1)
                return 1;
-               
+
 
        DEBUGMSG("C0 0x%04x HW: 0x%04x\n", ctrl0, c0);
        DEBUGMSG("C1 0x%04x HW: 0x%04x\n", ctrl1, c1);

diff --git a/lincan/src/hms30c7202_can.c b/lincan/src/hms30c7202_can.c
index 394fa959871122eb6223620d7cf3e510ecd37393..0bc5045f96f932ef51707fdd53122ee68ea0a01c 100644 (file)
--- a/lincan/src/hms30c7202_can.c
+++ b/lincan/src/hms30c7202_can.c
@@ -56,7 +56,7 @@
  *
  * The function hms30c7202_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
- * will have to add the code to reserve this memory as well. 
+ * will have to add the code to reserve this memory as well.
  * %IO_RANGE is the io-memory range that gets reserved, please adjust according
  * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
  * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
@@ -71,7 +71,7 @@ int hms30c7202_request_io(struct candevice_t *candev)
                CANMSG("hmsc30c7202_can failed to request mem region %lx.\n",
                (unsigned long)candev->io_addr );
        }
-       
+
        if (!( candev->dev_base_addr = ioremap( candev->io_addr, IO_RANGE ))) {
                DEBUGMSG( "Failed to map IO-memory: 0x%lx - 0x%lx, mapped to 0x%lx\n",
                        (unsigned long)candev->io_addr,
@@ -80,23 +80,23 @@ int hms30c7202_request_io(struct candevice_t *candev)
                can_release_mem_region(candev->io_addr, IO_RANGE);
                return -ENODEV;
        } else {
-       
+
                DEBUGMSG( "Mapped IO-memory: 0x%lx - 0x%lx, mapped to 0x%lx\n",
                        (unsigned long)candev->io_addr,
                        (unsigned long)candev->io_addr + IO_RANGE - 1,
                        (unsigned long)candev->dev_base_addr);
-       
+
        }
-       
+
        candev->chip[0]->chip_base_addr=candev->dev_base_addr;
-       
+
        //pchip->write_register(0, pchip->vbase_addr + CCCR);
        //DEBUGMSG("C-CAN Control Register : 0x%.4lx\n",
        //      (unsigned long)(c_can_read_reg_w( pchip->vbase_addr + CCCR)));
        candev->chip[0]->chipspecops->start_chip(candev->chip[0]);
        //DEBUGMSG("C-CAN Control Register : 0x%.4lx\n",
        //      (unsigned long)(c_can_read_reg_w( pchip->vbase_addr + CCCR)));
-       
+
        //DEBUGMSG("hms30c7202_can request i/o, leaving.\n");
        return 0;
 }
@@ -117,12 +117,12 @@ int hms30c7202_request_io(struct candevice_t *candev)
 int hms30c7202_release_io(struct candevice_t *candev)
 {
        u16 tempReg;
-       
+
        //disable IRQ generation
        tempReg = c_can_read_reg_w(candev->chip[0], CCCR);
 
        c_can_config_irqs(candev->chip[0], 0);
-       
+
        /*  // clear all message objects
        for (i=1; i<=15; i++) {
        ccscan_write_register(
@@ -144,13 +144,13 @@ int hms30c7202_release_io(struct candevice_t *candev)
        */
        // power down HMS30c7202 - C_CAN
        candev->chip[0]->chipspecops->stop_chip(candev->chip[0]);
-       
+
        // release I/O memory mapping
        iounmap(candev->dev_base_addr);
-       
+
        // Release the memory region
        can_release_mem_region(candev->io_addr, IO_RANGE);
-       
+
        return 0;
 }
 
@@ -169,7 +169,7 @@ int hms30c7202_reset(  struct candevice_t *candev)
        int i=0;
        int enableTest=0, disableTest=0;
        struct canchip_t *pchip = candev->chip[0];
-       
+
        enableTest = pchip->chipspecops->enable_configuration(pchip);
        disableTest = pchip->chipspecops->disable_configuration(pchip);
        if( enableTest || disableTest) {
@@ -177,9 +177,9 @@ int hms30c7202_reset(  struct candevice_t *candev)
                CANMSG("Please check your hardware.\n");
                return -ENODEV;
        }
-       
+
        /* Check busoff status */
-       
+
        while ( (c_can_read_reg_w(pchip, CCSR) & SR_BOFF) && (i<=15)) {
                udelay(20000);
                i++;
@@ -191,7 +191,7 @@ int hms30c7202_reset(  struct candevice_t *candev)
        }
        else
                DEBUGMSG("Chip0 reset status ok.\n");
-       
+
        //pchip->config_irqs(pchip, CR_MIE | CR_SIE | CR_EIE);
        return 0;
 }
@@ -214,14 +214,14 @@ int hms30c7202_reset(  struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/template.c
  */
-int hms30c7202_init_hw_data(struct candevice_t *candev) 
+int hms30c7202_init_hw_data(struct candevice_t *candev)
 /*( struct canchip_t *pchip, u16 chip_nr, u16 startminor, u32 baseaddr, u8 irq )*/
 {
        //      u32 intCntrVAddr = 0;
        can_ioptr_t gpioVAddr = 0;
        u32 tempReg = 0;
        u32 baseaddr=candev->io_addr;
-       
+
        //      if ( (!( intCntrVAddr = ioremap( 0x80024000, 0xCD ) ))
        //              & (! ( gpioVAddr = ioremap( 0x80023000, 0xAD ) ))) {
        //              DEBUGMSG("Failed to map Int and GPIO memory\n");
@@ -231,7 +231,7 @@ int hms30c7202_init_hw_data(struct candevice_t *candev)
                DEBUGMSG("Failed to map GPIO memory\n");
                return -EIO;
        } else {
-       
+
                //   DEBUGMSG( "Mapped Interrupt Controller IO-memory: 0x%lx - 0x%lx to 0x%lx\n",
                //            (unsigned long)0X80024000,
                //            (unsigned long)0X800240CC,
@@ -241,7 +241,7 @@ int hms30c7202_init_hw_data(struct candevice_t *candev)
                        (unsigned long)0X800240AC,
                        (unsigned long)gpioVAddr);
        }
-       
+
        if (baseaddr == 0x8002f000) {
                //              tempReg = can_readl(intCntrVAddr);
                //              DEBUGMSG("Read Interrupt Enable Register : 0x%.4lx\n",(long)tempReg);
@@ -293,7 +293,7 @@ int hms30c7202_init_hw_data(struct candevice_t *candev)
        // Initialize chip data ( only one chip )
        //  pcandev->pchip[ 0 ]->powner = pcandev;
        /*pchip->ntype = CAN_CHIPTYPE_C_CAN;*/
-       
+
        candev->nr_82527_chips=0;
        candev->nr_sja1000_chips=0;
        candev->nr_all_chips=NR_C_CAN;
@@ -325,14 +325,14 @@ int hms30c7202_init_chip_data(struct candevice_t *candev, int chipnr)
        candev->chip[chipnr]->max_objects = NR_MSGOBJ;
 
        candev->chip[chipnr]->chip_base_addr=candev->io_addr;
-       
+
        candev->chip[chipnr]->clock = 16000000/2;
-       
+
        /*candev->chip[chipnr]->int_clk_reg = 0x0;
        candev->chip[chipnr]->int_bus_reg = 0x0;
        candev->chip[chipnr]->sja_cdr_reg = 0x0;
        candev->chip[chipnr]->sja_ocr_reg = 0x0;*/
-       
+
 
        return 0;
 }
@@ -345,9 +345,9 @@ int hms30c7202_init_chip_data(struct candevice_t *candev, int chipnr)
  *
  * The function hms30c7202_init_obj_data() is used to initialize the hardware
  * structure containing information about the different message objects on the
- * CAN chip. 
- * The entry @obj_base_addr represents the first memory address of the message 
- * object. 
+ * CAN chip.
+ * The entry @obj_base_addr represents the first memory address of the message
+ * object.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
  * Return Value: The function always returns zero
  * File: src/template.c
@@ -359,7 +359,7 @@ int hms30c7202_init_obj_data(struct canchip_t *chip, int objnr)
 
        /* It seems, that there is no purpose to setup object base address */
        chip->msgobj[objnr]->obj_base_addr=0;
-       
+
        /*can_msgobj_test_fl(pmsgobj,RX_MODE_EXT);*/
        return 0;
 }
@@ -385,9 +385,9 @@ void hms30c7202_write_register(unsigned data, can_ioptr_t address)
 
        address = can_ulong2ioptr(((addr & C_CAN_REGOFFS_MASK) << 1) |
                                  (addr & ~C_CAN_REGOFFS_MASK));
-       
+
        //DEBUGMSG("Trying to write 0x%u16x to address 0x%lx\n",data,address);
-       
+
        can_writew(data,address);
        //udelay( usecs );
        for (i=0; i<5; i++);
@@ -408,19 +408,19 @@ unsigned hms30c7202_read_register(can_ioptr_t address)
 {
        unsigned long addr=can_ioptr2ulong(address);
        u16 value, i;
-       
+
        address = can_ulong2ioptr(((addr & C_CAN_REGOFFS_MASK) << 1) |
                                  (addr & ~C_CAN_REGOFFS_MASK));
 
        //DEBUGMSG("Trying to read from address 0x%lx :",address);
-       
+
        value = can_readw(address);
        //udelay( usecs );
        for (i=0;i<5;i++);
        value = can_readw(address);
                //udelay( usecs );
        for (i=0;i<5;i++);
-       
+
        //DEBUGMSG("0x%u16x\n",value);
        return value;
 
@@ -430,10 +430,10 @@ unsigned hms30c7202_read_register(can_ioptr_t address)
  * hms30c7202_program_irq - program interrupts
  * @candev: Pointer to candevice/board structure
  *
- * The function hms30c7202_program_irq() is used for hardware that uses 
+ * The function hms30c7202_program_irq() is used for hardware that uses
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
- * leave this function unedited. Again this function is hardware specific so 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
  * File: src/template.c

diff --git a/lincan/src/i82527.c b/lincan/src/i82527.c
index caed3d9f6f73253669b7bc899cb8c5ad8989cda1..635dfc7b7f8d5fd93488e91e6719078cd0ede6d0 100644 (file)
--- a/lincan/src/i82527.c
+++ b/lincan/src/i82527.c
@@ -37,7 +37,7 @@
 #include "../include/main.h"
 #include "../include/i82527.h"
 
-void i82527_irq_rtr_handler(struct canchip_t *chip, struct msgobj_t *obj, 
+void i82527_irq_rtr_handler(struct canchip_t *chip, struct msgobj_t *obj,
                            struct rtr_id *rtr_search, unsigned long message_id);
 
 
@@ -70,7 +70,7 @@ int i82527_enable_configuration(struct canchip_t *chip)
 
        flags = can_read_reg(chip, iCTL) & (iCTL_IE|iCTL_SIE|iCTL_EIE);
        can_write_reg(chip, flags|iCTL_CCE, iCTL);
-       
+
        return 0;
 }
 
@@ -88,11 +88,11 @@ int i82527_chip_config(struct canchip_t *chip)
 {
        can_write_reg(chip,chip->int_cpu_reg,iCPU); // Configure cpu interface
        can_write_reg(chip,(iCTL_CCE|iCTL_INI),iCTL); // Enable configuration
-       i82527_seg_write_reg(chip,chip->int_clk_reg,iCLK); // Set clock out slew rates 
+       i82527_seg_write_reg(chip,chip->int_clk_reg,iCLK); // Set clock out slew rates
        i82527_seg_write_reg(chip,chip->int_bus_reg,iBUS); /* Bus configuration */
        can_write_reg(chip,0x00,iSTAT); /* Clear error status register */
 
-       /* Check if we can at least read back some arbitrary data from the 
+       /* Check if we can at least read back some arbitrary data from the
         * card. If we can not, the card is not properly configured!
         */
        canobj_write_reg(chip,chip->msgobj[1],0x25,iMSGDAT1);
@@ -152,7 +152,7 @@ int i82527_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw,
        int best_error = 1000000000, error;
        int best_tseg=0, best_brp=0, best_rate=0, brp=0;
        int tseg=0, tseg1=0, tseg2=0;
-       
+
        if (i82527_enable_configuration(chip))
                return -ENODEV;
 
@@ -186,7 +186,7 @@ int i82527_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw,
                tseg2 = 0;
        if (tseg2 > MAX_TSEG2)
                tseg2 = MAX_TSEG2;
-       
+
        tseg1 = best_tseg-tseg2-2;
        if (tseg1>MAX_TSEG1) {
                tseg1 = MAX_TSEG1;
@@ -197,13 +197,13 @@ int i82527_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw,
        DEBUGMSG("brp=%d, best_tseg=%d, tseg1=%d, tseg2=%d, sampl_pt=%d\n",
                                        best_brp, best_tseg, tseg1, tseg2,
                                        (100*(best_tseg-tseg2)/(best_tseg+1)));
-                                       
-                               
+
+
        i82527_seg_write_reg(chip, sjw<<6 | best_brp, iBT0);
        can_write_reg(chip, ((flags & BTR1_SAM) != 0)<<7 | tseg2<<4 | tseg1,
                                                                iBT1);
        DEBUGMSG("Writing 0x%x to iBT0\n",(sjw<<6 | best_brp));
-       DEBUGMSG("Writing 0x%x to iBT1\n",((flags & BTR1_SAM) != 0)<<7 | 
+       DEBUGMSG("Writing 0x%x to iBT1\n",((flags & BTR1_SAM) != 0)<<7 |
                                                        tseg2<<4 | tseg1);
 
        i82527_disable_configuration(chip);
@@ -217,7 +217,7 @@ int i82527_standard_mask(struct canchip_t *chip, unsigned short code, unsigned s
 
        mask0 = (unsigned char) (mask >> 3);
        mask1 = (unsigned char) (mask << 5);
-       
+
        can_write_reg(chip,mask0,iSGM0);
        can_write_reg(chip,mask1,iSGM1);
 
@@ -293,7 +293,7 @@ int i82527_clear_objects(struct canchip_t *chip)
                DEBUGMSG("All message ID's set to standard\n");
        else
                DEBUGMSG("All message ID's set to extended\n");
-       
+
        return 0;
 }
 
@@ -337,7 +337,7 @@ int i82527_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
 {
        int i=0,id0=0,id1=0,id2=0,id3=0;
        int len;
-       
+
        len = msg->length;
        if(len > CAN_MSG_LENGTH) len = CAN_MSG_LENGTH;
 
@@ -403,7 +403,7 @@ int i82527_remote_request(struct canchip_t *chip, struct msgobj_t *obj)
 {
        canobj_write_reg(chip,obj,(MVAL_SET|TXIE_RES|RXIE_SET|INTPD_RES),iMSGCTL0);
        canobj_write_reg(chip,obj,(RMPD_RES|TXRQ_SET|MLST_RES|NEWD_RES),iMSGCTL1);
-       
+
        return 0;
 }
 
@@ -427,7 +427,7 @@ int i82527_start_chip(struct canchip_t *chip)
 
        flags = can_read_reg(chip, iCTL) & (iCTL_IE|iCTL_SIE|iCTL_EIE);
        can_write_reg(chip, flags, iCTL);
-       
+
        return 0;
 }
 
@@ -454,7 +454,7 @@ int i82527_release_chip(struct canchip_t *chip)
        return 0;
 }
 
-static inline 
+static inline
 void i82527_irq_write_handler(struct canchip_t *chip, struct msgobj_t *obj)
 {
        int cmd;
@@ -502,11 +502,11 @@ void i82527_irq_read_handler(struct canchip_t *chip, struct msgobj_t *obj, int o
        int i;
        unsigned long message_id;
        int msgcfg, msgctl1;
-       
+
        msgctl1=canobj_read_reg(chip,obj,iMSGCTL1);
        if(msgctl1 & NEWD_RES)
                return;
-       
+
        do {
                if(objnum != 14) {
                        canobj_write_reg(chip,obj,(RMPD_RES|TXRQ_RES|MLST_UNC|NEWD_RES),iMSGCTL1);
@@ -539,7 +539,7 @@ void i82527_irq_read_handler(struct canchip_t *chip, struct msgobj_t *obj, int o
                for (i=0; i < obj->rx_msg.length; i++)
                        obj->rx_msg.data[i] = canobj_read_reg(chip,obj,iMSGDAT0+i);
 
-               
+
                if(objnum != 14) {
                        /* if NEWD is set after data read, then read data are likely inconsistent */
                        msgctl1=canobj_read_reg(chip,obj,iMSGCTL1);
@@ -554,21 +554,21 @@ void i82527_irq_read_handler(struct canchip_t *chip, struct msgobj_t *obj, int o
                        canobj_write_reg(chip,obj,(RMPD_RES|TXRQ_RES|MLST_UNC|NEWD_RES),iMSGCTL1);
                        msgctl1=canobj_read_reg(chip,obj,iMSGCTL1);
                }
-               
+
 
                /* fill CAN message timestamp */
                can_filltimestamp(&obj->rx_msg.timestamp);
 
                canque_filter_msg2edges(obj->qends, &obj->rx_msg);
-               
+
                if (msgctl1 & NEWD_SET)
                        continue;
-               
+
                if (msgctl1 & MLST_SET) {
                        canobj_write_reg(chip,obj,(RMPD_UNC|TXRQ_UNC|MLST_RES|NEWD_UNC),iMSGCTL1);
                        CANMSG("i82527_irq_read_handler: object %d message lost\n",objnum);
                }
-               
+
                return;
 
        } while(1);
@@ -599,11 +599,11 @@ void i82527_irq_read_handler(struct canchip_t *chip, struct msgobj_t *obj, int o
                        if ((rtr_search!=NULL) && (rtr_search->id==message_id))
                                i82527_irq_rtr_handler(chip, obj, rtr_search, message_id);
                        else
-                               i82527_irq_read_handler(chip, obj, message_id); 
+                               i82527_irq_read_handler(chip, obj, message_id);
 */
 
 
-static inline 
+static inline
 void i82527_irq_update_filter(struct canchip_t *chip, struct msgobj_t *obj)
 {
        struct canfilt_t filt;
@@ -687,16 +687,16 @@ int i82527_irq_handler(int irq, struct canchip_t *chip)
                        CANMSG("i82527_irq_register 0x%x\n",irq_register);
                        return CANCHIP_IRQ_STUCK;
                }
-               
+
                DEBUGMSG("i82527: iIRQ 0x%02x\n",irq_register);
-               
+
                if (irq_register == 0x01) {
                        status_register=can_read_reg(chip, iSTAT);
                        CANMSG("Status register: 0x%x\n",status_register);
                        continue;
                        /*return CANCHIP_IRQ_NONE;*/
                }
-               
+
                if (irq_register == 0x02)
                        object = 14;
                else if(irq_register <= 13+3)
@@ -705,17 +705,17 @@ int i82527_irq_handler(int irq, struct canchip_t *chip)
                        return CANCHIP_IRQ_NONE;
 
                obj=chip->msgobj[object];
-               
+
                msgcfg = canobj_read_reg(chip,obj,iMSGCFG);
                if (msgcfg & MCFG_DIR) {
                        can_msgobj_set_fl(obj,TX_REQUEST);
-                       
+
                        /* calls i82527_irq_write_handler synchronized with other invocations */
                        if(i82527_irq_sync_activities(chip, obj)<=0){
                                /* The interrupt has to be cleared anyway */
                                canobj_write_reg(chip,obj,(MVAL_UNC|TXIE_UNC|RXIE_UNC|INTPD_RES),iMSGCTL0);
 
-                               /* 
+                               /*
                                 * Rerun for case, that parallel activity on SMP or fully-preemptive
                                 * kernel result in preparation and finished sending of message
                                 * between above if and canobj_write_reg.
@@ -723,11 +723,11 @@ int i82527_irq_handler(int irq, struct canchip_t *chip)
                                i82527_irq_sync_activities(chip, obj);
                        }
                }
-               else { 
+               else {
 
-                       i82527_irq_read_handler(chip, obj, object); 
+                       i82527_irq_read_handler(chip, obj, object);
                }
-               
+
        } while((irq_register=i82527_seg_read_reg(chip, iIRQ)) != 0);
 
        return CANCHIP_IRQ_HANDLED;
@@ -740,14 +740,14 @@ void i82527_irq_rtr_handler(struct canchip_t *chip, struct msgobj_t *obj,
 
        canobj_write_reg(chip,obj,(MVAL_RES|TXIE_RES|RXIE_RES|INTPD_RES),iMSGCTL0);
        canobj_write_reg(chip,obj,(RMPD_RES|TXRQ_RES|MLST_RES|NEWD_RES),iMSGCTL1);
-       
+
        can_spin_lock(&hardware_p->rtr_lock);
 
        rtr_search->rtr_message->id=message_id;
        rtr_search->rtr_message->length=(canobj_read_reg(chip,obj,iMSGCFG) & 0xf0)>>4;
        for (i=0; i<rtr_search->rtr_message->length; i++)
                rtr_search->rtr_message->data[i]=canobj_read_reg(chip,obj,iMSGDAT0+i);
-       
+
        can_spin_unlock(&hardware_p->rtr_lock);
 
        if (waitqueue_active(&rtr_search->rtr_wq))
@@ -768,7 +768,7 @@ void i82527_irq_rtr_handler(struct canchip_t *chip, struct msgobj_t *obj,
 int i82527_wakeup_tx(struct canchip_t *chip, struct msgobj_t *obj)
 {
        can_preempt_disable();
-       
+
        can_msgobj_set_fl(obj,TX_REQUEST);
 
        /* calls i82527_irq_write_handler synchronized with other invocations
@@ -782,7 +782,7 @@ int i82527_wakeup_tx(struct canchip_t *chip, struct msgobj_t *obj)
 int i82527_filtch_rq(struct canchip_t *chip, struct msgobj_t *obj)
 {
        can_preempt_disable();
-       
+
        can_msgobj_set_fl(obj,FILTCH_REQUEST);
 
        /* setups filter synchronized with other invocations from kernel and IRQ context */

diff --git a/lincan/src/ioctl.c b/lincan/src/ioctl.c
index e6dee366a4fbc0b59fccda4216d117cb551cb767..d3582d054e5563a119134ef7ddcea9cc708fb599 100644 (file)
--- a/lincan/src/ioctl.c
+++ b/lincan/src/ioctl.c
@@ -46,12 +46,12 @@ long can_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
        struct msgobj_t *obj;
        struct canchip_t *chip;
        struct canque_ends_t *qends;
-       
+
        if(!canuser || (canuser->magic != CAN_USER_MAGIC)){
                CANMSG("can_ioctl: bad canuser magic\n");
                return -ENODEV;
        }
-       
+
        obj = canuser->msgobj;
        if (obj == NULL) {
                CANMSG("Could not assign buffer structure\n");
@@ -92,14 +92,14 @@ long can_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
                case CONF_FILTER: {
 
                        /* In- and output buffer re-initialization */
-                       
+
                        if(canuser->rx_edge0){
                                canque_set_filt(canuser->rx_edge0, arg, ~0, 0);
                        }
 
                        break;
                }
-               
+
                case CANQUE_FILTER: {
                        struct canfilt_t canfilt;
                        int ret;
@@ -110,11 +110,11 @@ long can_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
                        }
                        break;
                }
-               
+
                case CANRTR_READ: {
                        int ret;
                        struct canmsg_t rtr_msg;
-                       
+
                        ret = copy_from_user(&rtr_msg, (void*)arg, sizeof(struct canmsg_t));
                        if(ret) return -EFAULT;
                        ret = can_ioctl_remote_read(canuser, &rtr_msg, rtr_msg.id, 0);
@@ -135,11 +135,11 @@ long can_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
                        }
                        break;
                }
-               
+
                case CONF_BAUDPARAMS: {
                        struct can_baudparams_t params;
                        int ret;
-                       
+
                        ret = copy_from_user(&params, (void*)arg, sizeof(struct can_baudparams_t));
                        if(ret) return -EFAULT;
 
@@ -162,7 +162,7 @@ long can_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
                        CANMSG("Not a valid ioctl command\n");
                        return -EINVAL;
                }
-               
+
        }
 
        return 0;

diff --git a/lincan/src/ioctl_remote.c b/lincan/src/ioctl_remote.c
index cabc2fc7a4351d42d03c1a910e93ca8ec3f381e7..5ba89f8ad00ef61cd6633982c62043ebfa2d8a9b 100644 (file)
--- a/lincan/src/ioctl_remote.c
+++ b/lincan/src/ioctl_remote.c
@@ -47,7 +47,7 @@ int can_ioctl_remote_read(struct canuser_t *canuser, struct canmsg_t *rtr_msg,
        struct msgobj_t *obj;
        struct canchip_t *chip;
        /*struct canque_ends_t *qends;*/
-       
+
        DEBUGMSG("Remote transmission request\n");
 
        /*qends = canuser->qends;*/
@@ -69,7 +69,7 @@ int can_ioctl_remote_read(struct canuser_t *canuser, struct canmsg_t *rtr_msg,
        if (hardware_p->rtr_queue == NULL) { //No remote messages pending
                new_rtr_entry=(struct rtr_id *)kmalloc(sizeof(struct rtr_id),GFP_ATOMIC);
                if (new_rtr_entry == NULL) {
-                       can_spin_unlock_irqrestore(&hardware_p->rtr_lock, 
+                       can_spin_unlock_irqrestore(&hardware_p->rtr_lock,
                                                                flags);
                        return -ENOMEM;
                }
@@ -96,7 +96,7 @@ int can_ioctl_remote_read(struct canuser_t *canuser, struct canmsg_t *rtr_msg,
 
        can_spin_lock_irqsave(&hardware_p->rtr_lock, flags);
        if (hardware_p->rtr_queue == new_rtr_entry) {
-               if (new_rtr_entry->next != NULL) 
+               if (new_rtr_entry->next != NULL)
                        hardware_p->rtr_queue=new_rtr_entry->next;
                else
                        hardware_p->rtr_queue=NULL;

diff --git a/lincan/src/ioctl_rtl.c b/lincan/src/ioctl_rtl.c
index 18cbe1b161dbec769491f0df8199f8fdcb8f0033..d8118668da6af18252e35f0fa5ab4252a166a96b 100644 (file)
--- a/lincan/src/ioctl_rtl.c
+++ b/lincan/src/ioctl_rtl.c
@@ -53,12 +53,12 @@ int can_ioctl_rtl_posix(struct rtl_file *fptr, unsigned int cmd, unsigned long a
        struct msgobj_t *obj;
        struct canchip_t *chip;
        struct canque_ends_t *qends;
-       
+
        if(!canuser || (canuser->magic != CAN_USER_MAGIC)){
                CANMSG("can_ioctl_: bad canuser magic\n");
                return -ENODEV;
        }
-       
+
        obj = canuser->msgobj;
        if (obj == NULL) {
                CANMSG("Could not assign buffer structure\n");
@@ -103,7 +103,7 @@ int can_ioctl_rtl_posix(struct rtl_file *fptr, unsigned int cmd, unsigned long a
 
                        break;
                }
-               
+
                case CANQUE_FILTER: {
                        struct canfilt_t canfilt=*(struct canfilt_t *)arg;
                        if(canuser->rx_edge0){
@@ -127,7 +127,7 @@ int can_ioctl_rtl_posix(struct rtl_file *fptr, unsigned int cmd, unsigned long a
                        CANMSG("Not a valid ioctl command\n");
                        return -EINVAL;
                }
-               
+
        }
 
        return 0;

diff --git a/lincan/src/ipci165.c b/lincan/src/ipci165.c
index 6b90ed0236e3ade276ded0247fc2c061fe29881e..bff48dd57618ad50892980d6c3c80aca1388aff4 100644 (file)
--- a/lincan/src/ipci165.c
+++ b/lincan/src/ipci165.c
@@ -492,12 +492,12 @@ int ipci165_set_btregs(struct canchip_t *chip, unsigned short btr0,
 
   DEBUGMSG ("ipci165_set_btregs[%i]: btr0=%02x, btr1=%02x\n",chip->chip_idx,
             (unsigned)btr0,(unsigned)btr1);
-  
+
   /* configure the chip */
   data[0] = chip->chip_idx;
   data[1] = btr0;
   data[2] = btr1;
-  
+
   size = 1;
   if (bci_command(chip->hostdevice, CMD_INIT_CAN, 3, data) ||
       bci_response(chip->hostdevice, CMD_INIT_CAN, &size, data) ||
@@ -522,10 +522,10 @@ int ipci165_start_chip(struct canchip_t *chip)
   int size;
 
   DEBUGMSG ("ipci165_start_chip[%i]\n",chip->chip_idx);
-  
+
   /* start CAN */
   data[0] = chip->chip_idx;
-  
+
   size = 1;
   if (bci_command(chip->hostdevice, CMD_START_CAN, 1, data) ||
       bci_response(chip->hostdevice, CMD_START_CAN, &size, data) ||
@@ -550,10 +550,10 @@ int ipci165_stop_chip(struct canchip_t *chip)
   int size;
 
   DEBUGMSG ("ipci165_stop_chip[%i]\n",chip->chip_idx);
-  
+
   /* configure the chip */
   data[0] = chip->chip_idx;
-  
+
   size = 1;
   if (bci_command(chip->hostdevice, CMD_STOP_CAN, 1, data) ||
       bci_response(chip->hostdevice, CMD_STOP_CAN, &size, data) ||
@@ -669,7 +669,7 @@ void ipci165_irq_read_handler(struct canchip_t *chip, struct msgobj_t *obj)
       obj->rx_msg.flags  = (frame_info & BCI_MSG_FRAME_RTR ? MSG_RTR : 0);
       obj->rx_msg.cob    = 0;
       obj->rx_msg.timestamp.tv_sec = 0;
-      obj->rx_msg.timestamp.tv_usec = 
+      obj->rx_msg.timestamp.tv_usec =
           BCI_TIMESTAMP_RES * can_readl(msg_addr + BCI_MSG_TIMESTAMP);
       /*  BCI_TIMESTAMP_RES * le32_to_cpu(can_readl(msg_addr + BCI_MSG_TIMESTAMP)); */
 
@@ -705,7 +705,7 @@ void ipci165_irq_read_handler(struct canchip_t *chip, struct msgobj_t *obj)
       DEBUGMSG ("ipci165_irq_read_handler[%i]: CAN status=%04x\n",chip->chip_idx, status);
 
       /* wake up the reset thread if the CAN is in bus off */
-      if (status & BCI_CAN_STATUS_BUS_OFF) 
+      if (status & BCI_CAN_STATUS_BUS_OFF)
       {
         CANMSG ("BUS-OFF detected! Restarting\n");
         set_bit(CHIP_FLAG_BUS_OFF,&chip_data->flags);
@@ -845,9 +845,9 @@ void ipci165_irq_write_handler(struct canchip_t *chip, struct msgobj_t *obj)
  */
 void ipci165_irq_sync_activities(struct canchip_t *chip, struct msgobj_t *obj)
 {
-  while(!can_msgobj_test_and_set_fl(obj,TX_LOCK)) 
+  while(!can_msgobj_test_and_set_fl(obj,TX_LOCK))
   {
-    if(can_msgobj_test_and_clear_fl(obj,TX_REQUEST)) 
+    if(can_msgobj_test_and_clear_fl(obj,TX_REQUEST))
     {
       ipci165_irq_write_handler(chip, obj);
     }
@@ -866,14 +866,14 @@ void ipci165_irq_sync_activities(struct canchip_t *chip, struct msgobj_t *obj)
  * @chip: pointer to chip state structure
  *
  * The main purpose of this function is to perform all necessary channel
- * operations as a reaction on signalled interrupt. 
+ * operations as a reaction on signalled interrupt.
  * File: src/ipci165.c
  */
 void ipci165_irq_chip_handler(struct canchip_t *chip)
 {
   struct msgobj_t       *obj = chip->msgobj[0];
   struct ipci165_chip_t *chip_data = chip->chip_data;
-  struct bci_queue_t    *queue; 
+  struct bci_queue_t    *queue;
 
   DEBUGMSG ("ipci165_irq_chip_handler[%i]\n",chip->chip_idx);
 
@@ -904,7 +904,7 @@ void ipci165_irq_chip_handler(struct canchip_t *chip)
  *     The CAN driver uses this pointer to store relationship of interrupt
  *     to chip state structure - @struct canchip_t
  * @regs: system dependent value pointing to registers stored in exception frame
- * 
+ *
  * The interrupt handler is activated when the ipci165 controller generates
  * an interrupt as a reaction an internal state change. The interrupt is
  * acknowledged and ipci165_irq_chip_handler is called for every channel.
@@ -1089,12 +1089,12 @@ int ipci165_request_io(struct candevice_t *candev)
   {
 #endif /*(LINUX_VERSION_CODE > KERNEL_VERSION(2,4,21))*/
 
-      if ((candev->dev_base_addr = ioremap(dpram_addr, 
+      if ((candev->dev_base_addr = ioremap(dpram_addr,
            pci_resource_len(candev->sysdevptr.pcidev,2))))
       {
         DEBUGMSG ("ipci165_request_io: dpram remapped to 0x%lx\n", candev->dev_base_addr);
 
-        if ((candev->aux_base_addr = ioremap(crm_addr, 
+        if ((candev->aux_base_addr = ioremap(crm_addr,
              pci_resource_len(candev->sysdevptr.pcidev,0))))
         {
           DEBUGMSG ("ipci165_request_io: crm remapped to 0x%lx\n", can_ioptr2ulong(candev->aux_base_addr));
@@ -1143,7 +1143,7 @@ int ipci165_release_io(struct candevice_t *candev)
 {
   struct ipci165_chip_t *chip_data;
   int i;
-  
+
   /* disable irq on HW */
   ipci165_disconnect_irq(candev);
 
@@ -1188,7 +1188,7 @@ int ipci165_download_fw(struct candevice_t *candev)
 
   DEBUGMSG ("ipci165_download_fw\n");
 
-  /* read name and version */  
+  /* read name and version */
   memcpy_fromio (board_name, dpram_addr + BOARD_NAME_OFS, BOARD_NAME_LEN);
   board_name[BOARD_NAME_LEN] = 0;
 
@@ -1358,7 +1358,7 @@ int ipci165_reset(struct candevice_t *candev)
     candev->nr_all_chips = chips;
     canchip_done(candev->chip[1]);
 
-  } else CANMSG ("Chip 2 Type: %s\n",buffer+OF_BOARD_INFO_CHIP2_TYPE); 
+  } else CANMSG ("Chip 2 Type: %s\n",buffer+OF_BOARD_INFO_CHIP2_TYPE);
 
   /* start kernel threads */
   for (i = 0 ; i < chips ; i++)
@@ -1415,7 +1415,7 @@ int ipci165_init_hw_data(struct candevice_t *candev)
   /* we do not know yet, whether our HW has one or two chan chips. Let's
      prepare configuration for maximal configuration = 2. This will be
      corrected later on */
-  candev->nr_all_chips=2; 
+  candev->nr_all_chips=2;
   candev->flags |= CANDEV_PROGRAMMABLE_IRQ*0;
   /* initialize device spinlock */
   can_spin_lock_init(&candev->device_lock);
@@ -1519,9 +1519,9 @@ int ipci165_init_chip_data(struct candevice_t *candev, int chipnr)
 int ipci165_init_obj_data(struct canchip_t *chip, int objnr)
 {
   struct msgobj_t *obj=chip->msgobj[objnr];
-  
+
   DEBUGMSG ("ipci165_init_obj_data\n");
-  
+
   obj->obj_base_addr = 0; /* not known yet */
   obj->tx_timeout.function = ipci165_do_tx_timeout;
   obj->tx_timeout.data = (unsigned long)obj;
@@ -1576,7 +1576,7 @@ void dump_mem(char *ptr, int size)
     strp = str;
     for (j = 0; j < to ; j++)
       strp += sprintf(strp, "%02x ",buf[j]);
-    for (; j < 16 ; j++) 
+    for (; j < 16 ; j++)
       strp += sprintf(strp, "   ");
     for (j = 0; j < to ; j++)
       *strp++= isprint(buf[j]) ? buf[j] : '.';

diff --git a/lincan/src/ipci165_fw.c b/lincan/src/ipci165_fw.c
index 33377c2b5ee8956d09bdc4afe52d0c8ae70544cf..852d208c539b434550094aa0f21667ffb3c0c5ae 100644 (file)
--- a/lincan/src/ipci165_fw.c
+++ b/lincan/src/ipci165_fw.c
@@ -1,11 +1,11 @@
 
 /************************************************************************
 ** BCI Firmware for IPCI165 ISA and PCI generated from the Intel HEX file
-************************************************************************/  
-  
+************************************************************************/
+
 
 #include "../include/ipci165_fw.h"
-  
+
 struct ipci165_fw_t ipci165_fw[] =
 {
   {
@@ -14,5594 +14,5594 @@ struct ipci165_fw_t ipci165_fw[] =
     0x55, 0x4E, 0x4B, 0x4E, 0x4F, 0x57, 0x4E, 0x00, 0x53, 0x4A, 0x41, 0x31,
         0x30, 0x30, 0x30, 0x00}
   }
-  , 
+  ,
   {
     0x08, 0x000000AEUL,
     {
     0x03, 0x04, 0x56, 0x34, 0x2E, 0x30, 0x33, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002B00UL,
     {
     0x2A, 0x40, 0x00, 0x10, 0x42, 0x61, 0x73, 0x69, 0x63, 0x20, 0x43, 0x41,
         0x4E, 0x20, 0x69, 0x6E}
   }
-  , 
+  ,
   {
     0x10, 0x00002B10UL,
     {
     0x74, 0x65, 0x72, 0x66, 0x61, 0x63, 0x65, 0x20, 0x66, 0x69, 0x72, 0x6D,
         0x77, 0x61, 0x72, 0x65}
   }
-  , 
+  ,
   {
     0x0E, 0x00002B20UL,
     {
     0x20, 0x66, 0x6F, 0x72, 0x20, 0x69, 0x50, 0x43, 0x2D, 0x49, 0x31, 0x36,
         0x35, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B2EUL,
     {
     0x02, 0x40, 0x2A, 0x10, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000016D4UL,
     {
     0xF0, 0x48, 0x07, 0xF8, 0xF8, 0x00, 0x2D, 0x06, 0x09, 0x82, 0x3D, 0x07,
         0xE0, 0x08, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000016E4UL,
     {
     0x38, 0x23, 0x0D, 0x03, 0xE0, 0x78, 0xCA, 0x00, 0x38, 0x23, 0x9A, 0x04,
         0x0B, 0x00, 0x04, 0x8F}
   }
-  , 
+  ,
   {
     0x10, 0x000016F4UL,
     {
     0x12, 0xFD, 0xF2, 0xF4, 0x12, 0xFD, 0x3D, 0x06, 0xCA, 0x00, 0xDC, 0x21,
         0xF2, 0xF4, 0x14, 0xFD}
   }
-  , 
+  ,
   {
     0x06, 0x00001704UL,
     {
     0xF6, 0xF4, 0x12, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000170AUL,
     {
     0xEC, 0xFE, 0xEC, 0xFF, 0xE6, 0xF8, 0x82, 0x10, 0xCA, 0x00, 0xAC, 0x1E,
         0xF0, 0x64, 0xF0, 0x75}
   }
-  , 
+  ,
   {
     0x10, 0x0000171AUL,
     {
     0xF6, 0xF4, 0x7C, 0x10, 0xF6, 0xF5, 0x7E, 0x10, 0x70, 0x65, 0xEA, 0x20,
         0xFA, 0x1B, 0xF2, 0xFF}
   }
-  , 
+  ,
   {
     0x10, 0x0000172AUL,
     {
     0x7E, 0x10, 0xF2, 0xFE, 0x7C, 0x10, 0xDC, 0x0F, 0xA9, 0x8E, 0x29, 0x82,
         0x2D, 0x35, 0x29, 0x82}
   }
-  , 
+  ,
   {
     0x10, 0x0000173AUL,
     {
     0x8D, 0x4B, 0x2D, 0x70, 0x29, 0x82, 0xEA, 0x20, 0x8A, 0x18, 0x29, 0x82,
         0xEA, 0x80, 0xF6, 0x18}
   }
-  , 
+  ,
   {
     0x10, 0x0000174AUL,
     {
     0xEA, 0x20, 0x60, 0x19, 0x29, 0x83, 0xEA, 0x20, 0xCA, 0x19, 0x29, 0x82,
         0xEA, 0x80, 0x28, 0x1A}
   }
-  , 
+  ,
   {
     0x10, 0x0000175AUL,
     {
     0xEA, 0x20, 0xCE, 0x1A, 0x29, 0x82, 0xEA, 0x80, 0x1E, 0x1B, 0xEA, 0x20,
         0x4C, 0x1B, 0x07, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x0000176AUL,
     {
     0x0E, 0x00, 0xEA, 0x30, 0xD6, 0x1B, 0xE1, 0x18, 0xF7, 0xF8, 0x2C, 0x10,
         0xE6, 0xFC, 0x2A, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000177AUL,
     {
     0xE6, 0xFA, 0x00, 0x10, 0xE6, 0xFB, 0x01, 0x00, 0xE6, 0xF8, 0x2D, 0x10,
         0xE6, 0xF9, 0x01, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000178AUL,
     {
     0xCA, 0x00, 0x1A, 0x29, 0xE6, 0xF9, 0x2C, 0x10, 0xE6, 0xFA, 0x01, 0x00,
         0xE6, 0xF8, 0x4C, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000179AUL,
     {
     0xCA, 0x00, 0xD8, 0x1E, 0xEA, 0x00, 0xFA, 0x1B, 0xE1, 0x28, 0xF7, 0xF8,
         0x2C, 0x10, 0xE0, 0x6C}
   }
-  , 
+  ,
   {
     0x10, 0x000017AAUL,
     {
     0xE6, 0xFA, 0xB0, 0x00, 0xE6, 0xFB, 0x00, 0x00, 0xE6, 0xF8, 0x2D, 0x10,
         0xE6, 0xF9, 0x01, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000017BAUL,
     {
     0xCA, 0x00, 0x1A, 0x29, 0xE6, 0xF9, 0x2C, 0x10, 0xE6, 0xFA, 0x01, 0x00,
         0xE6, 0xF8, 0x4C, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000017CAUL,
     {
     0xCA, 0x00, 0xD8, 0x1E, 0xEA, 0x00, 0xFA, 0x1B, 0xDC, 0x0F, 0xA9, 0x8E,
         0xF7, 0xF8, 0x2C, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x000017DAUL,
     {
     0xE1, 0x18, 0xF7, 0xF8, 0x81, 0x10, 0x0D, 0x0F, 0xC2, 0xF7, 0x81, 0x10,
         0xF2, 0xF5, 0x7E, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x000017EAUL,
     {
     0xF2, 0xF4, 0x7C, 0x10, 0x00, 0x47, 0xDC, 0x05, 0xA9, 0xA4, 0x57, 0xFA,
         0xFF, 0x00, 0xE4, 0xA7}
   }
-  , 
+  ,
   {
     0x10, 0x000017FAUL,
     {
     0x2C, 0x10, 0x25, 0x8F, 0x81, 0x10, 0xF3, 0xF8, 0x82, 0x10, 0x43, 0xF8,
         0x81, 0x10, 0xED, 0xEC}
   }
-  , 
+  ,
   {
     0x10, 0x0000180AUL,
     {
     0xE6, 0xF9, 0x2C, 0x10, 0xE6, 0xFA, 0x01, 0x00, 0xC2, 0xF8, 0x82, 0x10,
         0xCA, 0x00, 0xD8, 0x1E}
   }
-  , 
+  ,
   {
     0x10, 0x0000181AUL,
     {
     0xEA, 0x00, 0xFA, 0x1B, 0xF2, 0xF5, 0x7E, 0x10, 0xF2, 0xF4, 0x7C, 0x10,
         0xDC, 0x05, 0xF4, 0x84}
   }
-  , 
+  ,
   {
     0x10, 0x0000182AUL,
     {
     0x03, 0x00, 0xC0, 0x8B, 0xF2, 0xF4, 0x7C, 0x10, 0xDC, 0x05, 0xF4, 0x84,
         0x02, 0x00, 0xC0, 0x8A}
   }
-  , 
+  ,
   {
     0x10, 0x0000183AUL,
     {
     0xE0, 0x19, 0xF2, 0xF4, 0x7C, 0x10, 0xDC, 0x05, 0xF4, 0x84, 0x01, 0x00,
         0xC0, 0x88, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000184AUL,
     {
     0x18, 0x02, 0x49, 0x81, 0x3D, 0x0F, 0xE1, 0x48, 0xF7, 0xF8, 0x2C, 0x10,
         0xE1, 0x18, 0xF7, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x0000185AUL,
     {
     0x2D, 0x10, 0xE6, 0xF9, 0x2C, 0x10, 0xE6, 0xFA, 0x01, 0x00, 0xE0, 0x28,
         0xCA, 0x00, 0xD8, 0x1E}
   }
-  , 
+  ,
   {
     0x10, 0x0000186AUL,
     {
     0xEA, 0x00, 0xFA, 0x1B, 0xE1, 0x48, 0xF7, 0xF8, 0x2C, 0x10, 0xF7, 0x8E,
         0x2D, 0x10, 0xE6, 0xF9}
   }
-  , 
+  ,
   {
     0x10, 0x0000187AUL,
     {
     0x2C, 0x10, 0xE6, 0xFA, 0x01, 0x00, 0xE0, 0x28, 0xCA, 0x00, 0xD8, 0x1E,
         0xEA, 0x00, 0xFA, 0x1B}
   }
-  , 
+  ,
   {
     0x10, 0x0000188AUL,
     {
     0xF2, 0xF5, 0x7E, 0x10, 0xF2, 0xF4, 0x7C, 0x10, 0xDC, 0x05, 0xF4, 0x84,
         0x01, 0x00, 0xF7, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x0000189AUL,
     {
     0x80, 0x10, 0xC2, 0xF8, 0x80, 0x10, 0xCA, 0x00, 0x64, 0x04, 0x49, 0x81,
         0x3D, 0x0E, 0xE1, 0x68}
   }
-  , 
+  ,
   {
     0x10, 0x000018AAUL,
     {
     0xF7, 0xF8, 0x2C, 0x10, 0xE1, 0x18, 0xF7, 0xF8, 0x2D, 0x10, 0xE6, 0xF9,
         0x2C, 0x10, 0xE6, 0xFA}
   }
-  , 
+  ,
   {
     0x10, 0x000018BAUL,
     {
     0x01, 0x00, 0xE0, 0x28, 0xCA, 0x00, 0xD8, 0x1E, 0x0D, 0x0C, 0xE1, 0x68,
         0xF7, 0xF8, 0x2C, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x000018CAUL,
     {
     0xF7, 0x8E, 0x2D, 0x10, 0xE6, 0xF9, 0x2C, 0x10, 0xE6, 0xFA, 0x01, 0x00,
         0xE0, 0x28, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000018DAUL,
     {
     0xD8, 0x1E, 0xF3, 0xF8, 0x80, 0x10, 0x3D, 0x05, 0xE0, 0x28, 0xCA, 0x00,
         0x28, 0x24, 0xEA, 0x00}
   }
-  , 
+  ,
   {
     0x0C, 0x000018EAUL,
     {
     0xFA, 0x1B, 0xE0, 0x38, 0xCA, 0x00, 0x28, 0x24, 0xEA, 0x00, 0xFA, 0x1B}
   }
-  , 
+  ,
   {
     0x10, 0x000018F6UL,
     {
     0xF2, 0xF5, 0x7E, 0x10, 0xF2, 0xF4, 0x7C, 0x10, 0xDC, 0x05, 0xF4, 0x84,
         0x01, 0x00, 0xF7, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x00001906UL,
     {
     0x80, 0x10, 0x49, 0x80, 0x3D, 0x04, 0xE0, 0x28, 0xCA, 0x00, 0x6A, 0x24,
         0x0D, 0x03, 0xE0, 0x38}
   }
-  , 
+  ,
   {
     0x10, 0x00001916UL,
     {
     0xCA, 0x00, 0x6A, 0x24, 0xC2, 0xF8, 0x80, 0x10, 0xCA, 0x00, 0xA0, 0x05,
         0x49, 0x81, 0x3D, 0x0F}
   }
-  , 
+  ,
   {
     0x10, 0x00001926UL,
     {
     0xE1, 0x78, 0xF7, 0xF8, 0x2C, 0x10, 0xE1, 0x18, 0xF7, 0xF8, 0x2D, 0x10,
         0xE6, 0xF9, 0x2C, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x00001936UL,
     {
     0xE6, 0xFA, 0x01, 0x00, 0xE0, 0x28, 0xCA, 0x00, 0xD8, 0x1E, 0xEA, 0x00,
         0xFA, 0x1B, 0xE1, 0x78}
   }
-  , 
+  ,
   {
     0x10, 0x00001946UL,
     {
     0xF7, 0xF8, 0x2C, 0x10, 0xF7, 0x8E, 0x2D, 0x10, 0xE6, 0xF9, 0x2C, 0x10,
         0xE6, 0xFA, 0x01, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001956UL,
     {
     0xE0, 0x28, 0xCA, 0x00, 0xD8, 0x1E, 0xEA, 0x00, 0xFA, 0x1B, 0xF2, 0xF5,
         0x7E, 0x10, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00001966UL,
     {
     0x7C, 0x10, 0xDC, 0x05, 0xF4, 0x84, 0x01, 0x00, 0xF7, 0xF8, 0x80, 0x10,
         0x49, 0x80, 0x3D, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x00001976UL,
     {
     0xE0, 0x28, 0xCA, 0x00, 0x6A, 0x24, 0x0D, 0x03, 0xE0, 0x38, 0xCA, 0x00,
         0x6A, 0x24, 0xC2, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x00001986UL,
     {
     0x80, 0x10, 0xCA, 0x00, 0x44, 0x06, 0x49, 0x81, 0x3D, 0x0F, 0xE1, 0x88,
         0xF7, 0xF8, 0x2C, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x00001996UL,
     {
     0xE1, 0x18, 0xF7, 0xF8, 0x2D, 0x10, 0xE6, 0xF9, 0x2C, 0x10, 0xE6, 0xFA,
         0x01, 0x00, 0xE0, 0x28}
   }
-  , 
+  ,
   {
     0x10, 0x000019A6UL,
     {
     0xCA, 0x00, 0xD8, 0x1E, 0xEA, 0x00, 0xFA, 0x1B, 0xE1, 0x88, 0xF7, 0xF8,
         0x2C, 0x10, 0xF7, 0x8E}
   }
-  , 
+  ,
   {
     0x10, 0x000019B6UL,
     {
     0x2D, 0x10, 0xE6, 0xF9, 0x2C, 0x10, 0xE6, 0xFA, 0x01, 0x00, 0xE0, 0x28,
         0xCA, 0x00, 0xD8, 0x1E}
   }
-  , 
+  ,
   {
     0x10, 0x000019C6UL,
     {
     0xEA, 0x00, 0xFA, 0x1B, 0xF2, 0xF5, 0x7E, 0x10, 0xF2, 0xF4, 0x7C, 0x10,
         0xDC, 0x05, 0xF4, 0x84}
   }
-  , 
+  ,
   {
     0x10, 0x000019D6UL,
     {
     0x02, 0x00, 0xC0, 0x89, 0xF2, 0xF4, 0x7C, 0x10, 0xDC, 0x05, 0xF4, 0x84,
         0x01, 0x00, 0xC0, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x000019E6UL,
     {
     0xCA, 0x00, 0x76, 0x1E, 0x49, 0x81, 0x3D, 0x0F, 0xE1, 0xB8, 0xF7, 0xF8,
         0x2C, 0x10, 0xE1, 0x18}
   }
-  , 
+  ,
   {
     0x10, 0x000019F6UL,
     {
     0xF7, 0xF8, 0x2D, 0x10, 0xE6, 0xF9, 0x2C, 0x10, 0xE6, 0xFA, 0x01, 0x00,
         0xE0, 0x28, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001A06UL,
     {
     0xD8, 0x1E, 0xEA, 0x00, 0xFA, 0x1B, 0xE1, 0xB8, 0xF7, 0xF8, 0x2C, 0x10,
         0xF7, 0x8E, 0x2D, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x00001A16UL,
     {
     0xE6, 0xF9, 0x2C, 0x10, 0xE6, 0xFA, 0x01, 0x00, 0xE0, 0x28, 0xCA, 0x00,
         0xD8, 0x1E, 0xEA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001A26UL,
     {
     0xFA, 0x1B, 0xE1, 0xC8, 0xF7, 0xF8, 0x2C, 0x10, 0xD7, 0x00, 0x00, 0x00,
         0xF2, 0xF4, 0xAE, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001A36UL,
     {
     0xF6, 0xF4, 0x2E, 0x10, 0xF6, 0x8E, 0x30, 0x10, 0xF3, 0xF8, 0x2D, 0x11,
         0x49, 0x81, 0x3D, 0x0F}
   }
-  , 
+  ,
   {
     0x10, 0x00001A46UL,
     {
     0xE0, 0x14, 0xF6, 0xF4, 0x30, 0x10, 0xE0, 0x8C, 0xE6, 0xFA, 0x32, 0xC0,
         0xE6, 0xFB, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001A56UL,
     {
     0xE6, 0xF8, 0x32, 0x10, 0xE6, 0xF9, 0x01, 0x00, 0xCA, 0x00, 0x1A, 0x29,
         0x0D, 0x0B, 0xE0, 0x8C}
   }
-  , 
+  ,
   {
     0x10, 0x00001A66UL,
     {
     0xE6, 0xFA, 0x2A, 0xC0, 0xE6, 0xFB, 0x00, 0x00, 0xE6, 0xF8, 0x32, 0x10,
         0xE6, 0xF9, 0x01, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001A76UL,
     {
     0xCA, 0x00, 0x1A, 0x29, 0xF3, 0xF8, 0x2C, 0x11, 0x49, 0x81, 0x3D, 0x11,
         0xF2, 0xF4, 0x30, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x00001A86UL,
     {
     0x08, 0x41, 0xF6, 0xF4, 0x30, 0x10, 0xE0, 0x8C, 0xE6, 0xFA, 0x32, 0xC0,
         0xE6, 0xFB, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001A96UL,
     {
     0xE6, 0xF8, 0x3C, 0x10, 0xE6, 0xF9, 0x01, 0x00, 0xCA, 0x00, 0x1A, 0x29,
         0x0D, 0x0B, 0xE0, 0x8C}
   }
-  , 
+  ,
   {
     0x10, 0x00001AA6UL,
     {
     0xE6, 0xFA, 0x2A, 0xC0, 0xE6, 0xFB, 0x00, 0x00, 0xE6, 0xF8, 0x3C, 0x10,
         0xE6, 0xF9, 0x01, 0x00}
   }
-  , 
+  ,
   {
     0x0C, 0x00001AB6UL,
     {
     0xCA, 0x00, 0x1A, 0x29, 0xE6, 0xF9, 0x2C, 0x10, 0xE6, 0xFA, 0x01, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001AC2UL,
     {
     0xE6, 0xF8, 0x1A, 0x00, 0xCA, 0x00, 0xD8, 0x1E, 0xEA, 0x00, 0xFA, 0x1B,
         0x8A, 0x04, 0x19, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001AD2UL,
     {
     0xBE, 0x88, 0xCC, 0x00, 0xF2, 0xF5, 0x7E, 0x10, 0xF2, 0xF4, 0x7C, 0x10,
         0xDC, 0x05, 0xD4, 0x44}
   }
-  , 
+  ,
   {
     0x10, 0x00001AE2UL,
     {
     0x02, 0x00, 0xF6, 0xF4, 0x14, 0xFD, 0x7C, 0x14, 0xF6, 0xF4, 0x14, 0xFD,
         0xF6, 0xF4, 0x12, 0xFD}
   }
-  , 
+  ,
   {
     0x10, 0x00001AF2UL,
     {
     0x0F, 0x04, 0xBF, 0x88, 0xE1, 0xD8, 0xF7, 0xF8, 0x2C, 0x10, 0xE1, 0x18,
         0xF7, 0xF8, 0x2D, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x00001B02UL,
     {
     0x0D, 0x05, 0xE1, 0xD8, 0xF7, 0xF8, 0x2C, 0x10, 0xF7, 0x8E, 0x2D, 0x10,
         0xE6, 0xF9, 0x2C, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x00001B12UL,
     {
     0xE6, 0xFA, 0x01, 0x00, 0xE0, 0x28, 0xCA, 0x00, 0xD8, 0x1E, 0x0D, 0x6E,
         0x9A, 0x04, 0x08, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001B22UL,
     {
     0x0E, 0x04, 0xE1, 0xE8, 0xF7, 0xF8, 0x2C, 0x10, 0xE1, 0x18, 0xF7, 0xF8,
         0x2D, 0x10, 0x0D, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x00001B32UL,
     {
     0xE1, 0xE8, 0xF7, 0xF8, 0x2C, 0x10, 0xF7, 0x8E, 0x2D, 0x10, 0xE6, 0xF9,
         0x2C, 0x10, 0xE6, 0xFA}
   }
-  , 
+  ,
   {
     0x10, 0x00001B42UL,
     {
     0x01, 0x00, 0xE0, 0x28, 0xCA, 0x00, 0xD8, 0x1E, 0x0D, 0x57, 0xF2, 0xF7,
         0x7E, 0x10, 0xF2, 0xF6}
   }
-  , 
+  ,
   {
     0x10, 0x00001B52UL,
     {
     0x7C, 0x10, 0x06, 0xF6, 0x08, 0x00, 0xDC, 0x17, 0x98, 0x46, 0xA8, 0x56,
         0x88, 0x50, 0x88, 0x40}
   }
-  , 
+  ,
   {
     0x10, 0x00001B62UL,
     {
     0xF2, 0xF5, 0x7E, 0x10, 0xF2, 0xF4, 0x7C, 0x10, 0x08, 0x44, 0xDC, 0x15,
         0x98, 0xB4, 0xA8, 0xC4}
   }
-  , 
+  ,
   {
     0x10, 0x00001B72UL,
     {
     0xF2, 0xF4, 0x7C, 0x10, 0xDC, 0x05, 0xF4, 0x84, 0x03, 0x00, 0xC0, 0x8A,
         0xF2, 0xF4, 0x7C, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x00001B82UL,
     {
     0xDC, 0x05, 0xF4, 0x84, 0x02, 0x00, 0xC0, 0x89, 0xF2, 0xF4, 0x7C, 0x10,
         0xDC, 0x05, 0xF4, 0x84}
   }
-  , 
+  ,
   {
     0x10, 0x00001B92UL,
     {
     0x01, 0x00, 0xC0, 0x88, 0xCA, 0x00, 0x1A, 0x03, 0x08, 0x04, 0x49, 0x81,
         0x3D, 0x0E, 0xE1, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x00001BA2UL,
     {
     0xF7, 0xF8, 0x2C, 0x10, 0xE1, 0x18, 0xF7, 0xF8, 0x2D, 0x10, 0xE6, 0xF9,
         0x2C, 0x10, 0xE6, 0xFA}
   }
-  , 
+  ,
   {
     0x10, 0x00001BB2UL,
     {
     0x01, 0x00, 0xE0, 0x28, 0xCA, 0x00, 0xD8, 0x1E, 0x0D, 0x1F, 0xE1, 0xF8,
         0xF7, 0xF8, 0x2C, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x00001BC2UL,
     {
     0xF7, 0x8E, 0x2D, 0x10, 0xE6, 0xF9, 0x2C, 0x10, 0xE6, 0xFA, 0x01, 0x00,
         0xE0, 0x28, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001BD2UL,
     {
     0xD8, 0x1E, 0x0D, 0x12, 0xF2, 0xF7, 0x7E, 0x10, 0xF2, 0xF6, 0x7C, 0x10,
         0xDC, 0x07, 0xA9, 0x86}
   }
-  , 
+  ,
   {
     0x10, 0x00001BE2UL,
     {
     0x57, 0xF8, 0xFF, 0x00, 0xDC, 0x07, 0xB9, 0x86, 0xF2, 0xFA, 0x7E, 0x10,
         0xF2, 0xF9, 0x7C, 0x10}
   }
-  , 
+  ,
   {
     0x0E, 0x00001BF2UL,
     {
     0xC2, 0xF8, 0x82, 0x10, 0xCA, 0x00, 0xD8, 0x1E, 0xFC, 0xFF, 0xFC, 0xFE,
         0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001C00UL,
     {
     0xEC, 0xFD, 0xEC, 0xFE, 0xEC, 0xFF, 0xF0, 0xD8, 0x28, 0x02, 0x0D, 0x0F,
         0xE0, 0x09, 0xF0, 0x4D}
   }
-  , 
+  ,
   {
     0x10, 0x00001C10UL,
     {
     0xC0, 0x88, 0xCA, 0x00, 0x70, 0x2A, 0x49, 0x80, 0x2D, 0x10, 0xF0, 0xAF,
         0xF0, 0x9E, 0xE0, 0x08}
   }
-  , 
+  ,
   {
     0x10, 0x00001C20UL,
     {
     0xCA, 0x00, 0x8A, 0x08, 0xE0, 0x08, 0xCA, 0x00, 0xFA, 0x20, 0xF0, 0x90,
         0xE0, 0x08, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001C30UL,
     {
     0xA2, 0x20, 0xF0, 0xE4, 0xF0, 0xF5, 0x70, 0x45, 0x3D, 0xE9, 0x08, 0x02,
         0xFC, 0xFF, 0xFC, 0xFE}
   }
-  , 
+  ,
   {
     0x04, 0x00001C40UL,
     {
     0xFC, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001C44UL,
     {
     0xEC, 0xFD, 0xEC, 0xFE, 0xEC, 0xFF, 0xF0, 0xD8, 0x28, 0x02, 0x0D, 0x0F,
         0xE0, 0x19, 0xF0, 0x4D}
   }
-  , 
+  ,
   {
     0x10, 0x00001C54UL,
     {
     0xC0, 0x88, 0xCA, 0x00, 0x70, 0x2A, 0x49, 0x80, 0x2D, 0x10, 0xF0, 0xAF,
         0xF0, 0x9E, 0xE0, 0x18}
   }
-  , 
+  ,
   {
     0x10, 0x00001C64UL,
     {
     0xCA, 0x00, 0x8A, 0x08, 0xE0, 0x18, 0xCA, 0x00, 0xFA, 0x20, 0xF0, 0x90,
         0xE0, 0x18, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001C74UL,
     {
     0xA2, 0x20, 0xF0, 0xE4, 0xF0, 0xF5, 0x70, 0x45, 0x3D, 0xE9, 0x08, 0x02,
         0xFC, 0xFF, 0xFC, 0xFE}
   }
-  , 
+  ,
   {
     0x04, 0x00001C84UL,
     {
     0xFC, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001C88UL,
     {
     0xEC, 0xFE, 0xEC, 0xFF, 0x0D, 0x0E, 0xE0, 0x08, 0xCA, 0x00, 0x18, 0x1F,
         0x49, 0x80, 0x2D, 0x0F}
   }
-  , 
+  ,
   {
     0x10, 0x00001C98UL,
     {
     0xF0, 0xBF, 0xF0, 0xAE, 0xE6, 0xF9, 0x12, 0x00, 0xE0, 0x08, 0xCA, 0x00,
         0x56, 0x1F, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001CA8UL,
     {
     0x18, 0x0C, 0xCA, 0x00, 0xB8, 0x0B, 0xF0, 0xE4, 0xF0, 0xF5, 0x70, 0x45,
         0x3D, 0xEC, 0xFC, 0xFF}
   }
-  , 
+  ,
   {
     0x04, 0x00001CB8UL,
     {
     0xFC, 0xFE, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001CBCUL,
     {
     0xEC, 0xFE, 0xEC, 0xFF, 0x0D, 0x0E, 0xE0, 0x18, 0xCA, 0x00, 0x18, 0x1F,
         0x49, 0x80, 0x2D, 0x0F}
   }
-  , 
+  ,
   {
     0x10, 0x00001CCCUL,
     {
     0xF0, 0xBF, 0xF0, 0xAE, 0xE6, 0xF9, 0x12, 0x00, 0xE0, 0x18, 0xCA, 0x00,
         0x56, 0x1F, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001CDCUL,
     {
     0x34, 0x0C, 0xCA, 0x00, 0xE8, 0x0B, 0xF0, 0xE4, 0xF0, 0xF5, 0x70, 0x45,
         0x3D, 0xEC, 0xFC, 0xFF}
   }
-  , 
+  ,
   {
     0x04, 0x00001CECUL,
     {
     0xFC, 0xFE, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001CF0UL,
     {
     0x06, 0xF0, 0xF4, 0xFF, 0xE0, 0x08, 0xCA, 0x00, 0xA0, 0x0A, 0xB8, 0x40,
         0xC2, 0xF4, 0xF4, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00001D00UL,
     {
     0xC4, 0x40, 0x02, 0x00, 0xE0, 0x18, 0xCA, 0x00, 0xA0, 0x0A, 0xC4, 0x40,
         0x04, 0x00, 0xC2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00001D10UL,
     {
     0xF3, 0xFC, 0xC4, 0x40, 0x06, 0x00, 0xC2, 0xF4, 0xF0, 0x10, 0xC4, 0x40,
         0x08, 0x00, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x00001D20UL,
     {
     0x2A, 0x10, 0x24, 0x8F, 0x2A, 0x10, 0xC4, 0x50, 0x0A, 0x00, 0xF0, 0xA0,
         0xE0, 0x0B, 0x06, 0xFA}
   }
-  , 
+  ,
   {
     0x10, 0x00001D30UL,
     {
     0x00, 0x00, 0x16, 0xFB, 0x01, 0x00, 0xE0, 0xC9, 0xE0, 0x08, 0xCA, 0x00,
         0x80, 0x21, 0x06, 0xF0}
   }
-  , 
+  ,
   {
     0x04, 0x00001D40UL,
     {
     0x0C, 0x00, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001D44UL,
     {
     0xE6, 0x8A, 0xAF, 0x04, 0xE6, 0x0D, 0x02, 0x20, 0xE6, 0x8B, 0xAF, 0x04,
         0xE6, 0x0E, 0x40, 0x20}
   }
-  , 
+  ,
   {
     0x10, 0x00001D54UL,
     {
     0xE6, 0x8C, 0x5F, 0x04, 0xE6, 0x0F, 0x08, 0x10, 0xE6, 0x8D, 0xAF, 0x04,
         0x0E, 0x04, 0xE0, 0x28}
   }
-  , 
+  ,
   {
     0x10, 0x00001D64UL,
     {
     0xCA, 0x00, 0x18, 0x26, 0xE0, 0x88, 0xCA, 0x00, 0xFA, 0x27, 0xE0, 0x49,
         0xE0, 0x08, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001D74UL,
     {
     0xFE, 0x01, 0xE0, 0x59, 0xE0, 0x18, 0xCA, 0x00, 0xFE, 0x01, 0xE0, 0x68,
         0xCA, 0x00, 0x1C, 0x01}
   }
-  , 
+  ,
   {
     0x10, 0x00001D84UL,
     {
     0xE0, 0x18, 0xCA, 0x00, 0xE0, 0x1D, 0xE0, 0x29, 0xE0, 0x08, 0xCA, 0x00,
         0xEE, 0x1D, 0xE0, 0x39}
   }
-  , 
+  ,
   {
     0x10, 0x00001D94UL,
     {
     0xE0, 0x18, 0xCA, 0x00, 0xEE, 0x1D, 0xE0, 0x49, 0xE0, 0x08, 0xCA, 0x00,
         0x0E, 0x1E, 0xE0, 0x59}
   }
-  , 
+  ,
   {
     0x10, 0x00001DA4UL,
     {
     0xE0, 0x18, 0xCA, 0x00, 0x0E, 0x1E, 0xCA, 0x00, 0x2E, 0x1E, 0xE6, 0xFC,
         0x2A, 0x00, 0xE6, 0xFA}
   }
-  , 
+  ,
   {
     0x10, 0x00001DB4UL,
     {
     0x00, 0x10, 0xE6, 0xFB, 0x01, 0x00, 0xE0, 0x48, 0xE6, 0xF9, 0x20, 0x00,
         0xCA, 0x00, 0x1A, 0x29}
   }
-  , 
+  ,
   {
     0x10, 0x00001DC4UL,
     {
     0xE0, 0x6C, 0xE6, 0xFA, 0xB0, 0x00, 0xE6, 0xFB, 0x00, 0x00, 0xE6, 0xF8,
         0x2E, 0x00, 0xE6, 0xF9}
   }
-  , 
+  ,
   {
     0x0C, 0x00001DD4UL,
     {
     0x20, 0x00, 0xCA, 0x00, 0x1A, 0x29, 0xCA, 0x00, 0xAC, 0x24, 0x0D, 0xFD}
   }
-  , 
+  ,
   {
     0x10, 0x00002A70UL,
     {
     0xEC, 0xFD, 0xEC, 0xFE, 0xF0, 0xD9, 0xF0, 0xE8, 0xF0, 0x49, 0x49, 0x80,
         0x3D, 0x06, 0xF0, 0x4E}
   }
-  , 
+  ,
   {
     0x10, 0x00002A80UL,
     {
     0xC0, 0x89, 0xE0, 0x08, 0xCA, 0x00, 0x48, 0x25, 0x0D, 0x0A, 0xF0, 0x4D,
         0x49, 0x81, 0x3D, 0x06}
   }
-  , 
+  ,
   {
     0x10, 0x00002A90UL,
     {
     0xF0, 0x4E, 0xC0, 0x89, 0xE0, 0x18, 0xCA, 0x00, 0x48, 0x25, 0x0D, 0x01,
         0xE1, 0x08, 0xFC, 0xFE}
   }
-  , 
+  ,
   {
     0x04, 0x00002AA0UL,
     {
     0xFC, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002AA4UL,
     {
     0xEC, 0xFD, 0xF0, 0xD8, 0xF0, 0x48, 0x49, 0x80, 0x3D, 0x04, 0xE0, 0x08,
         0xCA, 0x00, 0xA4, 0x25}
   }
-  , 
+  ,
   {
     0x10, 0x00002AB4UL,
     {
     0x0D, 0x06, 0xF0, 0x4D, 0x49, 0x81, 0x3D, 0x03, 0xE0, 0x18, 0xCA, 0x00,
         0xA4, 0x25, 0xFC, 0xFD}
   }
-  , 
+  ,
   {
     0x02, 0x00002AC4UL,
     {
     0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002AC6UL,
     {
     0xEC, 0xFD, 0xF0, 0xD8, 0xF0, 0x48, 0x49, 0x80, 0x3D, 0x09, 0xE0, 0x08,
         0xCA, 0x00, 0xFE, 0x25}
   }
-  , 
+  ,
   {
     0x10, 0x00002AD6UL,
     {
     0x48, 0x40, 0x3D, 0x02, 0xE1, 0x08, 0x0D, 0x0F, 0xE1, 0x18, 0x0D, 0x0D,
         0xF0, 0x4D, 0x49, 0x81}
   }
-  , 
+  ,
   {
     0x10, 0x00002AE6UL,
     {
     0x3D, 0x09, 0xE0, 0x18, 0xCA, 0x00, 0xFE, 0x25, 0x48, 0x40, 0x3D, 0x02,
         0xE1, 0x08, 0x0D, 0x03}
   }
-  , 
+  ,
   {
     0x0A, 0x00002AF6UL,
     {
     0xE1, 0x18, 0x0D, 0x01, 0xE1, 0x08, 0xFC, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B34UL,
     {
     0x02, 0x40, 0x5A, 0x11, 0x01, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B3AUL,
     {
     0x02, 0x40, 0x5C, 0x11, 0x01, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B40UL,
     {
     0x01, 0x40, 0x5E, 0x11, 0x08, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B46UL,
     {
     0x02, 0x40, 0x00, 0xFD, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B4CUL,
     {
     0x02, 0x40, 0x02, 0xFD, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B52UL,
     {
     0x02, 0x40, 0x04, 0xFD, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B58UL,
     {
     0x02, 0x40, 0x06, 0xFD, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x02, 0x00002B5EUL,
     {
     0x04, 0x81}
   }
-  , 
+  ,
   {
     0x02, 0x00002B60UL,
     {
     0x84, 0x82}
   }
-  , 
+  ,
   {
     0x02, 0x00002B62UL,
     {
     0x04, 0x83}
   }
-  , 
+  ,
   {
     0x02, 0x00002B64UL,
     {
     0x84, 0x84}
   }
-  , 
+  ,
   {
     0x02, 0x00002B66UL,
     {
     0x84, 0x85}
   }
-  , 
+  ,
   {
     0x02, 0x00002B68UL,
     {
     0x84, 0x86}
   }
-  , 
+  ,
   {
     0x02, 0x00002B6AUL,
     {
     0x04, 0x87}
   }
-  , 
+  ,
   {
     0x02, 0x00002B6CUL,
     {
     0x04, 0x88}
   }
-  , 
+  ,
   {
     0x02, 0x00002B6EUL,
     {
     0x84, 0x89}
   }
-  , 
+  ,
   {
     0x02, 0x00002B70UL,
     {
     0x84, 0x8A}
   }
-  , 
+  ,
   {
     0x10, 0x000022E6UL,
     {
     0xF0, 0x48, 0x07, 0xF8, 0xF0, 0x00, 0x2D, 0x14, 0x07, 0xF8, 0xF0, 0x00,
         0x2D, 0x13, 0x29, 0x81}
   }
-  , 
+  ,
   {
     0x10, 0x000022F6UL,
     {
     0x2D, 0x13, 0x07, 0xF8, 0xF1, 0x00, 0x2D, 0x12, 0x29, 0x81, 0x2D, 0x12,
         0x07, 0xF8, 0xF3, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002306UL,
     {
     0x2D, 0x11, 0x29, 0x81, 0x2D, 0x11, 0x07, 0xF8, 0x3A, 0x00, 0x3D, 0x10,
         0xE1, 0x08, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002316UL,
     {
     0xE1, 0x18, 0xCB, 0x00, 0xE1, 0x28, 0xCB, 0x00, 0xE1, 0x38, 0xCB, 0x00,
         0xE1, 0x48, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002326UL,
     {
     0xE1, 0x58, 0xCB, 0x00, 0xE1, 0x68, 0xCB, 0x00, 0xE1, 0x78, 0xCB, 0x00,
         0xE7, 0xF8, 0xFF, 0x00}
   }
-  , 
+  ,
   {
     0x02, 0x00002336UL,
     {
     0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002338UL,
     {
     0xF0, 0x48, 0x47, 0xF8, 0x08, 0x00, 0x9D, 0x42, 0xC0, 0x84, 0x5C, 0x24,
         0x06, 0xF4, 0x4A, 0x23}
   }
-  , 
+  ,
   {
     0x10, 0x00002348UL,
     {
     0x9C, 0x04, 0xEA, 0x00, 0x6A, 0x23, 0xEA, 0x00, 0x70, 0x23, 0xEA, 0x00,
         0x7C, 0x23, 0xEA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002358UL,
     {
     0x88, 0x23, 0xEA, 0x00, 0x94, 0x23, 0xEA, 0x00, 0xA0, 0x23, 0xEA, 0x00,
         0xAC, 0x23, 0xEA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002368UL,
     {
     0xB8, 0x23, 0x4A, 0x04, 0x03, 0xA5, 0xCB, 0x00, 0x9A, 0x04, 0x2D, 0x90,
         0x0F, 0x02, 0xD1, 0x80}
   }
-  , 
+  ,
   {
     0x10, 0x00002378UL,
     {
     0x7F, 0xCA, 0xCB, 0x00, 0x9A, 0x04, 0x27, 0x80, 0x0F, 0x01, 0xD1, 0x80,
         0x7F, 0xC6, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002388UL,
     {
     0x9A, 0x04, 0x21, 0x70, 0x1F, 0x01, 0xD1, 0x80, 0x7F, 0xC6, 0xCB, 0x00,
         0x9A, 0x04, 0x1B, 0x60}
   }
-  , 
+  ,
   {
     0x10, 0x00002398UL,
     {
     0x0F, 0x00, 0xD1, 0x80, 0x7F, 0xC2, 0xCB, 0x00, 0x9A, 0x04, 0x15, 0x50,
         0x1F, 0x00, 0xD1, 0x80}
   }
-  , 
+  ,
   {
     0x10, 0x000023A8UL,
     {
     0x7F, 0xC2, 0xCB, 0x00, 0x9A, 0x04, 0x0F, 0x40, 0xEF, 0x00, 0xD1, 0x80,
         0x7F, 0xC2, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000023B8UL,
     {
     0x9A, 0x04, 0x09, 0x20, 0xFF, 0x00, 0xD1, 0x80, 0x7F, 0xC2, 0xCB, 0x00,
         0xF0, 0x48, 0xC0, 0x89}
   }
-  , 
+  ,
   {
     0x08, 0x000023C8UL,
     {
     0xE0, 0x38, 0xCA, 0x00, 0x84, 0x00, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000023D0UL,
     {
     0xE1, 0x0A, 0xF0, 0x48, 0xC0, 0x84, 0xE4, 0xA4, 0xCF, 0x10, 0xF0, 0x48,
         0x47, 0xF8, 0x08, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000023E0UL,
     {
     0x9D, 0x1D, 0xC0, 0x84, 0x5C, 0x14, 0x06, 0xF4, 0xEC, 0x23, 0x9C, 0x04,
         0x0D, 0x07, 0x0D, 0x08}
   }
-  , 
+  ,
   {
     0x10, 0x000023F0UL,
     {
     0x0D, 0x09, 0x0D, 0x0A, 0x0D, 0x0B, 0x0D, 0x0C, 0x0D, 0x0D, 0x0D, 0x0E,
         0x5E, 0x03, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002400UL,
     {
     0x0E, 0x02, 0xCB, 0x00, 0x0E, 0x01, 0xCB, 0x00, 0x1E, 0x01, 0xCB, 0x00,
         0x0E, 0x00, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002410UL,
     {
     0x1E, 0x00, 0xCB, 0x00, 0xEE, 0x00, 0xCB, 0x00, 0xFE, 0x00, 0xCB, 0x00,
         0xF0, 0x48, 0xC0, 0x89}
   }
-  , 
+  ,
   {
     0x08, 0x00002420UL,
     {
     0xE0, 0x58, 0xCA, 0x00, 0x84, 0x00, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002428UL,
     {
     0xF0, 0x48, 0x47, 0xF8, 0x08, 0x00, 0x9D, 0x1C, 0xC0, 0x84, 0x5C, 0x14,
         0x06, 0xF4, 0x3A, 0x24}
   }
-  , 
+  ,
   {
     0x10, 0x00002438UL,
     {
     0x9C, 0x04, 0x0D, 0x07, 0x0D, 0x08, 0x0D, 0x09, 0x0D, 0x0A, 0x0D, 0x0B,
         0x0D, 0x0C, 0x0D, 0x0D}
   }
-  , 
+  ,
   {
     0x10, 0x00002448UL,
     {
     0x0D, 0x0E, 0xAF, 0x04, 0xCB, 0x00, 0x9F, 0x04, 0xCB, 0x00, 0x8F, 0x04,
         0xCB, 0x00, 0x7F, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x00002458UL,
     {
     0xCB, 0x00, 0x6F, 0x04, 0xCB, 0x00, 0x5F, 0x04, 0xCB, 0x00, 0x4F, 0x04,
         0xCB, 0x00, 0x2F, 0x04}
   }
-  , 
+  ,
   {
     0x02, 0x00002468UL,
     {
     0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000246AUL,
     {
     0xF0, 0x48, 0x47, 0xF8, 0x08, 0x00, 0x9D, 0x1C, 0xC0, 0x84, 0x5C, 0x14,
         0x06, 0xF4, 0x7C, 0x24}
   }
-  , 
+  ,
   {
     0x10, 0x0000247AUL,
     {
     0x9C, 0x04, 0x0D, 0x07, 0x0D, 0x08, 0x0D, 0x09, 0x0D, 0x0A, 0x0D, 0x0B,
         0x0D, 0x0C, 0x0D, 0x0D}
   }
-  , 
+  ,
   {
     0x10, 0x0000248AUL,
     {
     0x0D, 0x0E, 0xAE, 0x04, 0xCB, 0x00, 0x9E, 0x04, 0xCB, 0x00, 0x8E, 0x04,
         0xCB, 0x00, 0x7E, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x0000249AUL,
     {
     0xCB, 0x00, 0x6E, 0x04, 0xCB, 0x00, 0x5E, 0x04, 0xCB, 0x00, 0x4E, 0x04,
         0xCB, 0x00, 0x2E, 0x04}
   }
-  , 
+  ,
   {
     0x02, 0x000024AAUL,
     {
     0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000024ACUL,
     {
     0xF2, 0xF4, 0x06, 0xFD, 0x3D, 0x0A, 0xCA, 0x00, 0xA4, 0x26, 0x0D, 0xFA,
         0x0D, 0x06, 0xAA, 0x03}
   }
-  , 
+  ,
   {
     0x10, 0x000024BCUL,
     {
     0x01, 0x50, 0x0D, 0x03, 0xE0, 0x08, 0xCA, 0x00, 0xF0, 0x1C, 0xF2, 0xF4,
         0x06, 0xFD, 0x3D, 0xF7}
   }
-  , 
+  ,
   {
     0x02, 0x000024CCUL,
     {
     0x0D, 0xEF}
   }
-  , 
+  ,
   {
     0x10, 0x000024CEUL,
     {
     0x0D, 0x06, 0xAA, 0x02, 0x01, 0x00, 0x0D, 0x03, 0xE0, 0x18, 0xCA, 0x00,
         0x0A, 0x17, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x06, 0x000024DEUL,
     {
     0x04, 0xFD, 0x3D, 0xF7, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000024E4UL,
     {
     0x0D, 0x0D, 0xAA, 0x01, 0x01, 0x10, 0x0D, 0x04, 0xE0, 0x38, 0xCA, 0x00,
         0x44, 0x1C, 0x0D, 0x06}
   }
-  , 
+  ,
   {
     0x10, 0x000024F4UL,
     {
     0xAA, 0x01, 0x01, 0x00, 0x0D, 0x03, 0xE0, 0x28, 0xCA, 0x00, 0x00, 0x1C,
         0xF2, 0xF4, 0x02, 0xFD}
   }
-  , 
+  ,
   {
     0x04, 0x00002504UL,
     {
     0x3D, 0xF0, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002508UL,
     {
     0x0D, 0x1B, 0xAA, 0x00, 0x01, 0xF0, 0x0D, 0x04, 0xE0, 0x78, 0xCA, 0x00,
         0xB2, 0x26, 0x0D, 0x14}
   }
-  , 
+  ,
   {
     0x10, 0x00002518UL,
     {
     0xAA, 0x00, 0x01, 0xE0, 0x0D, 0x04, 0xE0, 0x68, 0xCA, 0x00, 0x50, 0x0C,
         0x0D, 0x0D, 0xAA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002528UL,
     {
     0x01, 0x10, 0x0D, 0x04, 0xE0, 0x58, 0xCA, 0x00, 0xBC, 0x1C, 0x0D, 0x06,
         0xAA, 0x00, 0x01, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002538UL,
     {
     0x0D, 0x03, 0xE0, 0x48, 0xCA, 0x00, 0x88, 0x1C, 0xF2, 0xF4, 0x00, 0xFD,
         0x3D, 0xE2, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002548UL,
     {
     0xF0, 0x48, 0x29, 0x81, 0x2D, 0x13, 0x09, 0x81, 0x3D, 0x22, 0xBE, 0x88,
         0xCC, 0x00, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00002558UL,
     {
     0x5C, 0x11, 0x3D, 0x07, 0xF0, 0x49, 0x29, 0x82, 0x3D, 0x01, 0x3F, 0x04,
         0xBF, 0x88, 0xE1, 0x08}
   }
-  , 
+  ,
   {
     0x10, 0x00002568UL,
     {
     0xCB, 0x00, 0x04, 0x8F, 0x5C, 0x11, 0xBF, 0x88, 0xE1, 0x18, 0xCB, 0x00,
         0xBE, 0x88, 0xCC, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002578UL,
     {
     0xF2, 0xF4, 0x5A, 0x11, 0x3D, 0x07, 0xF0, 0x49, 0x29, 0x83, 0x3D, 0x01,
         0x1F, 0x04, 0xBF, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x00002588UL,
     {
     0xE1, 0x08, 0xCB, 0x00, 0x04, 0x8F, 0x5A, 0x11, 0xBF, 0x88, 0xE1, 0x18,
         0xCB, 0x00, 0xF0, 0x48}
   }
-  , 
+  ,
   {
     0x0C, 0x00002598UL,
     {
     0xC0, 0x89, 0xE0, 0x48, 0xCA, 0x00, 0x84, 0x00, 0xE1, 0x08, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000025A4UL,
     {
     0xF0, 0x48, 0x29, 0x81, 0x2D, 0x13, 0x09, 0x81, 0x3D, 0x22, 0xBE, 0x88,
         0xCC, 0x00, 0x24, 0x8F}
   }
-  , 
+  ,
   {
     0x10, 0x000025B4UL,
     {
     0x5C, 0x11, 0xBF, 0x88, 0xAA, 0x04, 0x01, 0x30, 0x0D, 0x07, 0xBE, 0x88,
         0xCC, 0x00, 0x9A, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x000025C4UL,
     {
     0x03, 0x80, 0x0F, 0x01, 0xD1, 0x80, 0x7F, 0xC6, 0xBF, 0x88, 0xCB, 0x00,
         0xBE, 0x88, 0xCC, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000025D4UL,
     {
     0x24, 0x8F, 0x5A, 0x11, 0xBF, 0x88, 0xAA, 0x04, 0x01, 0x10, 0x0D, 0x07,
         0xBE, 0x88, 0xCC, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000025E4UL,
     {
     0x9A, 0x04, 0x03, 0x70, 0x1F, 0x01, 0xD1, 0x80, 0x7F, 0xC6, 0xBF, 0x88,
         0xCB, 0x00, 0xF0, 0x48}
   }
-  , 
+  ,
   {
     0x0A, 0x000025F4UL,
     {
     0xC0, 0x89, 0xE0, 0x48, 0xCA, 0x00, 0x84, 0x00, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000025FEUL,
     {
     0xF0, 0x48, 0x29, 0x81, 0x2D, 0x05, 0x09, 0x81, 0x3D, 0x06, 0xF2, 0xF4,
         0x5C, 0x11, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x0A, 0x0000260EUL,
     {
     0xF2, 0xF4, 0x5A, 0x11, 0xCB, 0x00, 0xE0, 0x04, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000291AUL,
     {
     0x48, 0xC0, 0x2D, 0x08, 0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88,
         0x08, 0x81, 0x28, 0xC1}
   }
-  , 
+  ,
   {
     0x06, 0x0000292AUL,
     {
     0x48, 0xC0, 0x3D, 0xF8, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002930UL,
     {
     0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B,
         0x99, 0x8A, 0xDC, 0x09}
   }
-  , 
+  ,
   {
     0x10, 0x00002940UL,
     {
     0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88,
         0x08, 0x81, 0xDC, 0x0B}
   }
-  , 
+  ,
   {
     0x10, 0x00002950UL,
     {
     0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B, 0x99, 0x8A,
         0xDC, 0x09, 0xB9, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x00002960UL,
     {
     0x08, 0x81, 0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81,
         0xDC, 0x0B, 0x99, 0x8A}
   }
-  , 
+  ,
   {
     0x10, 0x00002970UL,
     {
     0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B, 0xA9, 0x8A, 0xDC, 0x09,
         0xB9, 0x88, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002980UL,
     {
     0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B,
         0x99, 0x8A, 0xDC, 0x09}
   }
-  , 
+  ,
   {
     0x10, 0x00002990UL,
     {
     0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88,
         0x08, 0x81, 0xDC, 0x0B}
   }
-  , 
+  ,
   {
     0x10, 0x000029A0UL,
     {
     0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B, 0x99, 0x8A,
         0xDC, 0x09, 0xB9, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x000029B0UL,
     {
     0x08, 0x81, 0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81,
         0xDC, 0x0B, 0x99, 0x8A}
   }
-  , 
+  ,
   {
     0x10, 0x000029C0UL,
     {
     0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09,
         0xB9, 0x88, 0x08, 0x81}
   }
-  , 
+  ,
   {
     0x10, 0x000029D0UL,
     {
     0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B,
         0x99, 0x8A, 0xDC, 0x09}
   }
-  , 
+  ,
   {
     0x10, 0x000029E0UL,
     {
     0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88,
         0x08, 0x81, 0xDC, 0x0B}
   }
-  , 
+  ,
   {
     0x10, 0x000029F0UL,
     {
     0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B, 0xA9, 0x8A,
         0xDC, 0x09, 0xB9, 0x88}
   }
-  , 
+  ,
   {
     0x02, 0x00002A00UL,
     {
     0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002A02UL,
     {
     0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B,
         0x99, 0x8A, 0xDC, 0x09}
   }
-  , 
+  ,
   {
     0x10, 0x00002A12UL,
     {
     0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88,
         0x08, 0x81, 0xDC, 0x0B}
   }
-  , 
+  ,
   {
     0x10, 0x00002A22UL,
     {
     0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B, 0x99, 0x8A,
         0xDC, 0x09, 0xB9, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x00002A32UL,
     {
     0x08, 0x81, 0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81,
         0xDC, 0x0B, 0x99, 0x8A}
   }
-  , 
+  ,
   {
     0x10, 0x00002A42UL,
     {
     0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09,
         0xB9, 0x88, 0x08, 0x81}
   }
-  , 
+  ,
   {
     0x10, 0x00002A52UL,
     {
     0xDC, 0x0B, 0x99, 0x8A, 0xDC, 0x09, 0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B,
         0x99, 0x8A, 0xDC, 0x09}
   }
-  , 
+  ,
   {
     0x0E, 0x00002A62UL,
     {
     0xB9, 0x88, 0x08, 0x81, 0xDC, 0x0B, 0xA9, 0x8A, 0xDC, 0x09, 0xB9, 0x88,
         0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000C000UL,
     {
     0x0A, 0x20, 0x43, 0x43, 0x49, 0x5F, 0x49, 0x6E, 0x73, 0x74, 0x61, 0x6C,
         0x6C, 0x3A, 0x20, 0x5A}
   }
-  , 
+  ,
   {
     0x10, 0x0000C010UL,
     {
     0x75, 0x65, 0x72, 0x73, 0x74, 0x20, 0x54, 0x61, 0x73, 0x6B, 0x73, 0x20,
         0x72, 0x65, 0x67, 0x69}
   }
-  , 
+  ,
   {
     0x0A, 0x0000C020UL,
     {
     0x73, 0x74, 0x69, 0x65, 0x72, 0x65, 0x6E, 0x20, 0x21, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B72UL,
     {
     0x01, 0x40, 0x4A, 0x11, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B78UL,
     {
     0x01, 0x40, 0x4B, 0x11, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B7EUL,
     {
     0x01, 0x40, 0x4C, 0x11, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B84UL,
     {
     0x01, 0x40, 0x4D, 0x11, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B8AUL,
     {
     0x01, 0x40, 0x4E, 0x11, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B90UL,
     {
     0x01, 0x40, 0x4F, 0x11, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B96UL,
     {
     0x01, 0x40, 0x50, 0x11, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002B9CUL,
     {
     0x01, 0x40, 0x51, 0x11, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x0E, 0x00001DE0UL,
     {
     0xF0, 0x48, 0xF7, 0xF8, 0x4C, 0x11, 0xE1, 0x18, 0x75, 0xF8, 0x4D, 0x11,
         0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001DEEUL,
     {
     0xF0, 0x48, 0x29, 0x81, 0x2D, 0x06, 0x09, 0x81, 0x3D, 0x07, 0xF0, 0x49,
         0xF7, 0xF8, 0x51, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00001DFEUL,
     {
     0x0D, 0x03, 0xF0, 0x49, 0xF7, 0xF8, 0x50, 0x11, 0xE1, 0x28, 0x75, 0xF8,
         0x4D, 0x11, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001E0EUL,
     {
     0xF0, 0x48, 0x29, 0x81, 0x2D, 0x06, 0x09, 0x81, 0x3D, 0x07, 0xF0, 0x49,
         0xF7, 0xF8, 0x4F, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00001E1EUL,
     {
     0x0D, 0x03, 0xF0, 0x49, 0xF7, 0xF8, 0x4E, 0x11, 0xE1, 0x48, 0x75, 0xF8,
         0x4D, 0x11, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001E2EUL,
     {
     0xF3, 0xF8, 0x4D, 0x11, 0x49, 0x87, 0x2D, 0x06, 0xE6, 0xF8, 0x00, 0xC0,
         0xCA, 0x00, 0x36, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001E3EUL,
     {
     0xE1, 0x08, 0xCB, 0x00, 0xE0, 0x04, 0xE6, 0xF5, 0x20, 0x00, 0xF6, 0xF4,
         0x46, 0x11, 0xF6, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x00001E4EUL,
     {
     0x48, 0x11, 0xE6, 0xF4, 0x00, 0x20, 0xF6, 0xF4, 0x42, 0x11, 0xF6, 0xF5,
         0x44, 0x11, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001E5EUL,
     {
     0x80, 0x22, 0x7E, 0xE6, 0x7F, 0xE7, 0xE6, 0xCA, 0x59, 0x00, 0xD1, 0x90,
         0x66, 0xE0, 0xFF, 0xCF}
   }
-  , 
+  ,
   {
     0x08, 0x00001E6EUL,
     {
     0x76, 0xE0, 0x00, 0x20, 0xE1, 0x18, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001E76UL,
     {
     0xF0, 0x49, 0x49, 0x80, 0x2D, 0x06, 0x49, 0x81, 0x2D, 0x04, 0x49, 0x82,
         0x2D, 0x02, 0xE1, 0x08}
   }
-  , 
+  ,
   {
     0x10, 0x00001E86UL,
     {
     0xCB, 0x00, 0xF0, 0x48, 0x49, 0x80, 0x3D, 0x04, 0xF0, 0x49, 0xF7, 0xF8,
         0x4B, 0x11, 0x0D, 0x09}
   }
-  , 
+  ,
   {
     0x10, 0x00001E96UL,
     {
     0xF0, 0x48, 0x49, 0x81, 0x3D, 0x04, 0xF0, 0x49, 0xF7, 0xF8, 0x4A, 0x11,
         0x0D, 0x02, 0xE1, 0x08}
   }
-  , 
+  ,
   {
     0x06, 0x00001EA6UL,
     {
     0xCB, 0x00, 0xE1, 0x18, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001EACUL,
     {
     0xF2, 0xF7, 0x48, 0x11, 0xF2, 0xF6, 0x46, 0x11, 0xDC, 0x07, 0xA9, 0x86,
         0x49, 0x81, 0x3D, 0x0B}
   }
-  , 
+  ,
   {
     0x10, 0x00001EBCUL,
     {
     0xDC, 0x17, 0xF4, 0x86, 0x01, 0x00, 0xCC, 0x00, 0xB9, 0x88, 0xF2, 0xF5,
         0x48, 0x11, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x0C, 0x00001ECCUL,
     {
     0x46, 0x11, 0x08, 0x44, 0xCB, 0x00, 0xE0, 0x04, 0xE0, 0x05, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001ED8UL,
     {
     0xEC, 0xFD, 0xF0, 0x69, 0xF0, 0x7A, 0xF0, 0xD8, 0xF0, 0x48, 0xC0, 0x8C,
         0xF0, 0xBA, 0xF0, 0xA9}
   }
-  , 
+  ,
   {
     0x10, 0x00001EE8UL,
     {
     0xF2, 0xF9, 0x48, 0x11, 0xF2, 0xF8, 0x46, 0x11, 0x08, 0x84, 0xCA, 0x00,
         0x1A, 0x29, 0xF0, 0x6D}
   }
-  , 
+  ,
   {
     0x10, 0x00001EF8UL,
     {
     0xF2, 0xF5, 0x48, 0x11, 0xF2, 0xF4, 0x46, 0x11, 0xDC, 0x05, 0xE4, 0xC4,
         0x01, 0x00, 0xE1, 0x2C}
   }
-  , 
+  ,
   {
     0x10, 0x00001F08UL,
     {
     0xF2, 0xF5, 0x48, 0x11, 0xF2, 0xF4, 0x46, 0x11, 0xDC, 0x05, 0xB9, 0xC4,
         0xFC, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001F18UL,
     {
     0xF0, 0x48, 0x29, 0x81, 0x2D, 0x0E, 0x09, 0x81, 0x3D, 0x18, 0xF2, 0xF5,
         0x40, 0x11, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00001F28UL,
     {
     0x3E, 0x11, 0xDC, 0x05, 0xA9, 0x84, 0x3D, 0x02, 0x0F, 0xF4, 0x0D, 0x01,
         0x0E, 0xF4, 0x69, 0x81}
   }
-  , 
+  ,
   {
     0x10, 0x00001F38UL,
     {
     0xCB, 0x00, 0xF2, 0xF5, 0x38, 0x11, 0xF2, 0xF4, 0x36, 0x11, 0xDC, 0x05,
         0xA9, 0x84, 0x3D, 0x02}
   }
-  , 
+  ,
   {
     0x0E, 0x00001F48UL,
     {
     0x0F, 0xF4, 0x0D, 0x01, 0x0E, 0xF4, 0x69, 0x81, 0xCB, 0x00, 0xE1, 0x08,
         0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001F56UL,
     {
     0xEC, 0xFD, 0xEC, 0xFE, 0xEC, 0xFF, 0xF0, 0xEA, 0xF0, 0xFB, 0xF0, 0xD9,
         0xF0, 0x48, 0x29, 0x81}
   }
-  , 
+  ,
   {
     0x10, 0x00001F66UL,
     {
     0x2D, 0x4E, 0x09, 0x81, 0xEA, 0x30, 0x98, 0x20, 0xF2, 0xF9, 0x40, 0x11,
         0xF2, 0xF8, 0x3E, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00001F76UL,
     {
     0xDC, 0x09, 0xA9, 0x88, 0xEA, 0x30, 0x98, 0x20, 0xF0, 0x6D, 0xDC, 0x09,
         0xE4, 0xC8, 0x01, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001F86UL,
     {
     0xF0, 0x4D, 0xC0, 0x8C, 0xF0, 0xBF, 0xF0, 0xAE, 0xF2, 0xF9, 0x40, 0x11,
         0xF2, 0xF8, 0x3E, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00001F96UL,
     {
     0x08, 0x82, 0xCA, 0x00, 0x1A, 0x29, 0xE1, 0x1C, 0xF2, 0xF5, 0x40, 0x11,
         0xF2, 0xF4, 0x3E, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00001FA6UL,
     {
     0xDC, 0x05, 0xB9, 0xC4, 0xE6, 0xF4, 0x14, 0x00, 0x04, 0xF4, 0x3E, 0x11,
         0xF2, 0xF9, 0x48, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00001FB6UL,
     {
     0xF2, 0xF8, 0x46, 0x11, 0xF0, 0x68, 0x06, 0xF6, 0x08, 0x0C, 0xF0, 0x79,
         0x22, 0xF6, 0x3E, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00001FC6UL,
     {
     0x32, 0xF7, 0x40, 0x11, 0xED, 0x06, 0x06, 0xF8, 0x20, 0x08, 0xF6, 0xF8,
         0x3E, 0x11, 0xF6, 0xF9}
   }
-  , 
+  ,
   {
     0x10, 0x00001FD6UL,
     {
     0x40, 0x11, 0xF3, 0xF8, 0x4B, 0x11, 0x49, 0x81, 0x3D, 0x03, 0xCA, 0x00,
         0xDC, 0x21, 0x0D, 0x0D}
   }
-  , 
+  ,
   {
     0x10, 0x00001FE6UL,
     {
     0xF3, 0xF8, 0x4B, 0x11, 0x49, 0x82, 0x3D, 0x09, 0xF2, 0xF5, 0x40, 0x11,
         0xF2, 0xF4, 0x3E, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00001FF6UL,
     {
     0xDC, 0x05, 0xA9, 0x84, 0x2D, 0x02, 0xCA, 0x00, 0xDC, 0x21, 0xE1, 0x18,
         0x0D, 0x4B, 0xF2, 0xF9}
   }
-  , 
+  ,
   {
     0x10, 0x00002006UL,
     {
     0x38, 0x11, 0xF2, 0xF8, 0x36, 0x11, 0xDC, 0x09, 0xA9, 0x88, 0x3D, 0x43,
         0xF0, 0x6D, 0xDC, 0x09}
   }
-  , 
+  ,
   {
     0x10, 0x00002016UL,
     {
     0xE4, 0xC8, 0x01, 0x00, 0xF0, 0x4D, 0xC0, 0x8C, 0xF0, 0xBF, 0xF0, 0xAE,
         0xF2, 0xF9, 0x38, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00002026UL,
     {
     0xF2, 0xF8, 0x36, 0x11, 0x08, 0x82, 0xCA, 0x00, 0x1A, 0x29, 0xE1, 0x1C,
         0xF2, 0xF5, 0x38, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00002036UL,
     {
     0xF2, 0xF4, 0x36, 0x11, 0xDC, 0x05, 0xB9, 0xC4, 0xE6, 0xF4, 0x14, 0x00,
         0x04, 0xF4, 0x36, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00002046UL,
     {
     0xF2, 0xF9, 0x48, 0x11, 0xF2, 0xF8, 0x46, 0x11, 0xF0, 0x68, 0x06, 0xF6,
         0xF0, 0x0F, 0xF0, 0x79}
   }
-  , 
+  ,
   {
     0x10, 0x00002056UL,
     {
     0x22, 0xF6, 0x36, 0x11, 0x32, 0xF7, 0x38, 0x11, 0xED, 0x06, 0x06, 0xF8,
         0x08, 0x0C, 0xF6, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x00002066UL,
     {
     0x36, 0x11, 0xF6, 0xF9, 0x38, 0x11, 0xF3, 0xF8, 0x4A, 0x11, 0x49, 0x81,
         0x3D, 0x03, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002076UL,
     {
     0xDC, 0x21, 0x0D, 0x0D, 0xF3, 0xF8, 0x4A, 0x11, 0x49, 0x82, 0x3D, 0x09,
         0xF2, 0xF5, 0x38, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00002086UL,
     {
     0xF2, 0xF4, 0x36, 0x11, 0xDC, 0x05, 0xA9, 0x84, 0x2D, 0x02, 0xCA, 0x00,
         0xDC, 0x21, 0xE1, 0x18}
   }
-  , 
+  ,
   {
     0x0C, 0x00002096UL,
     {
     0x0D, 0x01, 0xE1, 0x08, 0xFC, 0xFF, 0xFC, 0xFE, 0xFC, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000020A2UL,
     {
     0xF0, 0x48, 0x29, 0x81, 0x2D, 0x14, 0x09, 0x81, 0x3D, 0x24, 0xF2, 0xF7,
         0x3C, 0x11, 0xF2, 0xF6}
   }
-  , 
+  ,
   {
     0x10, 0x000020B2UL,
     {
     0x3A, 0x11, 0xDC, 0x07, 0xA9, 0x86, 0x2D, 0x1D, 0xDC, 0x17, 0xF4, 0x86,
         0x01, 0x00, 0xCC, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000020C2UL,
     {
     0xB9, 0x89, 0xF2, 0xF5, 0x3C, 0x11, 0xF2, 0xF4, 0x3A, 0x11, 0x08, 0x42,
         0xCB, 0x00, 0xF2, 0xF7}
   }
-  , 
+  ,
   {
     0x10, 0x000020D2UL,
     {
     0x34, 0x11, 0xF2, 0xF6, 0x32, 0x11, 0xDC, 0x07, 0xA9, 0x86, 0x2D, 0x0B,
         0xDC, 0x17, 0xF4, 0x86}
   }
-  , 
+  ,
   {
     0x10, 0x000020E2UL,
     {
     0x01, 0x00, 0xCC, 0x00, 0xB9, 0x89, 0xF2, 0xF5, 0x34, 0x11, 0xF2, 0xF4,
         0x32, 0x11, 0x08, 0x42}
   }
-  , 
+  ,
   {
     0x08, 0x000020F2UL,
     {
     0xCB, 0x00, 0xE0, 0x04, 0xE0, 0x05, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000020FAUL,
     {
     0xF0, 0x48, 0x29, 0x81, 0x2D, 0x21, 0x09, 0x81, 0x3D, 0x3D, 0xE1, 0x0C,
         0xF2, 0xF5, 0x3C, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x0000210AUL,
     {
     0xF2, 0xF4, 0x3A, 0x11, 0xDC, 0x05, 0xB9, 0xC4, 0xE6, 0xF4, 0x14, 0x00,
         0x04, 0xF4, 0x3A, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x0000211AUL,
     {
     0xF2, 0xF9, 0x48, 0x11, 0xF2, 0xF8, 0x46, 0x11, 0xF0, 0x68, 0x06, 0xF6,
         0x38, 0x04, 0xF0, 0x79}
   }
-  , 
+  ,
   {
     0x10, 0x0000212AUL,
     {
     0x22, 0xF6, 0x3A, 0x11, 0x32, 0xF7, 0x3C, 0x11, 0xED, 0x25, 0x06, 0xF8,
         0x50, 0x00, 0xF6, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x0000213AUL,
     {
     0x3A, 0x11, 0xF6, 0xF9, 0x3C, 0x11, 0xCB, 0x00, 0xE1, 0x0C, 0xF2, 0xF5,
         0x34, 0x11, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x0000214AUL,
     {
     0x32, 0x11, 0xDC, 0x05, 0xB9, 0xC4, 0xE6, 0xF4, 0x14, 0x00, 0x04, 0xF4,
         0x32, 0x11, 0xF2, 0xF9}
   }
-  , 
+  ,
   {
     0x10, 0x0000215AUL,
     {
     0x48, 0x11, 0xF2, 0xF8, 0x46, 0x11, 0xF0, 0x68, 0x06, 0xF6, 0x20, 0x08,
         0xF0, 0x79, 0x22, 0xF6}
   }
-  , 
+  ,
   {
     0x10, 0x0000216AUL,
     {
     0x32, 0x11, 0x32, 0xF7, 0x34, 0x11, 0xED, 0x06, 0x06, 0xF8, 0x38, 0x04,
         0xF6, 0xF8, 0x32, 0x11}
   }
-  , 
+  ,
   {
     0x06, 0x0000217AUL,
     {
     0xF6, 0xF9, 0x34, 0x11, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002180UL,
     {
     0xEC, 0xFE, 0xEC, 0xFF, 0xF0, 0x2A, 0xF0, 0x3B, 0xF0, 0x78, 0xE1, 0x0C,
         0xF2, 0xF5, 0x44, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00002190UL,
     {
     0xF2, 0xF4, 0x42, 0x11, 0xDC, 0x05, 0xB9, 0xC4, 0xF2, 0xFF, 0x44, 0x11,
         0xF2, 0xFE, 0x42, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x000021A0UL,
     {
     0xDC, 0x0F, 0xA9, 0x8E, 0x3D, 0x14, 0xF0, 0x49, 0xC0, 0x8C, 0xF2, 0xF9,
         0x48, 0x11, 0xF2, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x000021B0UL,
     {
     0x46, 0x11, 0x00, 0x87, 0x06, 0xF8, 0xF0, 0x0F, 0xCA, 0x00, 0x1A, 0x29,
         0xE1, 0x1C, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x000021C0UL,
     {
     0x44, 0x11, 0xF2, 0xF4, 0x42, 0x11, 0xDC, 0x05, 0xB9, 0xC4, 0xE1, 0x18,
         0x0D, 0x04, 0xE1, 0x1C}
   }
-  , 
+  ,
   {
     0x0C, 0x000021D0UL,
     {
     0xDC, 0x0F, 0xB9, 0xCE, 0xE1, 0x08, 0xFC, 0xFF, 0xFC, 0xFE, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x0C, 0x000021DCUL,
     {
     0xBE, 0x88, 0xCC, 0x00, 0x7F, 0xE6, 0x7E, 0xE6, 0xBF, 0x88, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000021E8UL,
     {
     0xC6, 0x03, 0x03, 0x00, 0xCC, 0x00, 0xF6, 0xF0, 0x00, 0xFC, 0xC6, 0x08,
         0x00, 0xFC, 0xCC, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000021F8UL,
     {
     0xEC, 0x00, 0xC6, 0x87, 0x10, 0x00, 0xEC, 0x06, 0xEC, 0x07, 0xF2, 0xF5,
         0x40, 0x11, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00002208UL,
     {
     0x3E, 0x11, 0xDC, 0x05, 0xA9, 0x84, 0x3D, 0x04, 0xC2, 0xF8, 0x4F, 0x11,
         0xCA, 0x00, 0x38, 0x23}
   }
-  , 
+  ,
   {
     0x10, 0x00002218UL,
     {
     0xF2, 0xF5, 0x38, 0x11, 0xF2, 0xF4, 0x36, 0x11, 0xDC, 0x05, 0xA9, 0x84,
         0x3D, 0x04, 0xC2, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x00002228UL,
     {
     0x4E, 0x11, 0xCA, 0x00, 0x38, 0x23, 0xF2, 0xF5, 0x3C, 0x11, 0xF2, 0xF4,
         0x3A, 0x11, 0xDC, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x00002238UL,
     {
     0xA9, 0x84, 0x2D, 0x04, 0xC2, 0xF8, 0x51, 0x11, 0xCA, 0x00, 0x38, 0x23,
         0xF2, 0xF5, 0x34, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00002248UL,
     {
     0xF2, 0xF4, 0x32, 0x11, 0xDC, 0x05, 0xA9, 0x84, 0x2D, 0x04, 0xC2, 0xF8,
         0x50, 0x11, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002258UL,
     {
     0x38, 0x23, 0xF2, 0xF5, 0x48, 0x11, 0xF2, 0xF4, 0x46, 0x11, 0xDC, 0x05,
         0xA9, 0x84, 0x49, 0x81}
   }
-  , 
+  ,
   {
     0x10, 0x00002268UL,
     {
     0x3D, 0x04, 0xC2, 0xF8, 0x4C, 0x11, 0xCA, 0x00, 0x38, 0x23, 0xFC, 0x07,
         0xFC, 0x06, 0xFC, 0x87}
   }
-  , 
+  ,
   {
     0x08, 0x00002278UL,
     {
     0xFC, 0x00, 0xFC, 0x08, 0xFC, 0x03, 0xFB, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x00002280UL,
     {
     0xE6, 0xFB, 0x00, 0x20, 0xE0, 0x0A, 0xE0, 0x08, 0xE6, 0xF9, 0x80, 0x00,
         0xCA, 0x00, 0x94, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002290UL,
     {
     0xF2, 0xFB, 0x48, 0x11, 0xF2, 0xFA, 0x46, 0x11, 0xF0, 0x4A, 0x06, 0xF4,
         0x50, 0x00, 0xF6, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x000022A0UL,
     {
     0x3A, 0x11, 0xF6, 0xFB, 0x3C, 0x11, 0xF0, 0x6A, 0x06, 0xF6, 0x38, 0x04,
         0xF6, 0xF6, 0x32, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x000022B0UL,
     {
     0xF6, 0xFB, 0x34, 0x11, 0xF0, 0x8A, 0x06, 0xF8, 0x20, 0x08, 0xF6, 0xF8,
         0x3E, 0x11, 0xF6, 0xFB}
   }
-  , 
+  ,
   {
     0x10, 0x000022C0UL,
     {
     0x40, 0x11, 0x06, 0xFA, 0x08, 0x0C, 0xF6, 0xFA, 0x36, 0x11, 0xF6, 0xFB,
         0x38, 0x11, 0xE0, 0x08}
   }
-  , 
+  ,
   {
     0x10, 0x000022D0UL,
     {
     0xE1, 0x1E, 0xF2, 0xF5, 0x44, 0x11, 0xF2, 0xF4, 0x42, 0x11, 0x00, 0x48,
         0xDC, 0x05, 0xB9, 0xE4}
   }
-  , 
+  ,
   {
     0x06, 0x000022E0UL,
     {
     0x80, 0xF8, 0x8D, 0xF7, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002BA2UL,
     {
     0x01, 0x40, 0x2C, 0x11, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002BA8UL,
     {
     0x01, 0x40, 0x2D, 0x11, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002BAEUL,
     {
     0x01, 0x40, 0x30, 0x11, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002BB4UL,
     {
     0x01, 0x40, 0x31, 0x11, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002BBAUL,
     {
     0x01, 0x40, 0xF0, 0xFC, 0x02, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002BC0UL,
     {
     0x01, 0x40, 0xF1, 0xFC, 0x02, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000011CUL,
     {
     0xEC, 0xFD, 0xF0, 0xD8, 0xFE, 0x04, 0xEE, 0x04, 0x1E, 0x05, 0x0E, 0x05,
         0xF6, 0x8E, 0x10, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x0000012CUL,
     {
     0xF6, 0x8E, 0x18, 0x11, 0xF6, 0x8E, 0x0C, 0x11, 0xF6, 0x8E, 0x14, 0x11,
         0xF6, 0x8E, 0x26, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x0000013CUL,
     {
     0xF6, 0x8E, 0x28, 0x11, 0xF6, 0x8E, 0xFE, 0x10, 0xF6, 0x8E, 0x00, 0x11,
         0xF6, 0x8E, 0x1E, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x0000014CUL,
     {
     0xF6, 0x8E, 0x20, 0x11, 0xF6, 0x8E, 0xF6, 0x10, 0xF6, 0x8E, 0xF8, 0x10,
         0xF6, 0x8E, 0x0E, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x0000015CUL,
     {
     0xF6, 0x8E, 0x16, 0x11, 0xF6, 0x8E, 0x0A, 0x11, 0xF6, 0x8E, 0x12, 0x11,
         0xF6, 0x8E, 0x22, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x0000016CUL,
     {
     0xF6, 0x8E, 0x24, 0x11, 0xF6, 0x8E, 0xFA, 0x10, 0xF6, 0x8E, 0xFC, 0x10,
         0xF6, 0x8E, 0x1A, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x0000017CUL,
     {
     0xF6, 0x8E, 0x1C, 0x11, 0xF6, 0x8E, 0xF2, 0x10, 0xF6, 0x8E, 0xF4, 0x10,
         0xE6, 0xF4, 0x00, 0x40}
   }
-  , 
+  ,
   {
     0x10, 0x0000018CUL,
     {
     0xE6, 0xF5, 0x20, 0x00, 0xF6, 0xF4, 0x06, 0x11, 0xF6, 0xF5, 0x08, 0x11,
         0xE6, 0xF4, 0x00, 0x48}
   }
-  , 
+  ,
   {
     0x10, 0x0000019CUL,
     {
     0xF6, 0xF4, 0x02, 0x11, 0xF6, 0xF5, 0x04, 0x11, 0x5F, 0xE7, 0x6F, 0xE7,
         0x5F, 0xE6, 0x6F, 0xE6}
   }
-  , 
+  ,
   {
     0x10, 0x000001ACUL,
     {
     0x5E, 0xE6, 0xCA, 0x00, 0x8A, 0x0D, 0x5F, 0xE6, 0xCA, 0x00, 0x8A, 0x0D,
         0x6E, 0xE6, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000001BCUL,
     {
     0x8A, 0x0D, 0x6F, 0xE6, 0xCA, 0x00, 0x8A, 0x0D, 0xD1, 0x90, 0x66, 0xE0,
         0xFF, 0xF0, 0x76, 0xE0}
   }
-  , 
+  ,
   {
     0x10, 0x000001CCUL,
     {
     0x00, 0x0A, 0xE6, 0xC8, 0x68, 0x00, 0xE6, 0xC9, 0x69, 0x00, 0xE0, 0x08,
         0xCA, 0x00, 0x3C, 0x0D}
   }
-  , 
+  ,
   {
     0x10, 0x000001DCUL,
     {
     0xF7, 0xF8, 0x2D, 0x11, 0xE0, 0x18, 0xCA, 0x00, 0x3C, 0x0D, 0xF7, 0xF8,
         0x2C, 0x11, 0xF0, 0x4D}
   }
-  , 
+  ,
   {
     0x10, 0x000001ECUL,
     {
     0xF7, 0xF8, 0xF2, 0xFC, 0xE0, 0x89, 0xC2, 0xF8, 0xF2, 0xFC, 0xCA, 0x00,
         0x00, 0x27, 0xFC, 0xFD}
   }
-  , 
+  ,
   {
     0x02, 0x000001FCUL,
     {
     0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000001FEUL,
     {
     0xF0, 0x48, 0x29, 0x81, 0x2D, 0x06, 0x09, 0x81, 0x3D, 0x07, 0xF0, 0x49,
         0xF7, 0xF8, 0x31, 0x11}
   }
-  , 
+  ,
   {
     0x0A, 0x0000020EUL,
     {
     0xCB, 0x00, 0xF0, 0x49, 0xF7, 0xF8, 0x30, 0x11, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000218UL,
     {
     0xEC, 0xFD, 0xEC, 0xFE, 0xEC, 0xFF, 0xF0, 0xDB, 0xF0, 0xEA, 0xF0, 0xF9,
         0x88, 0x80, 0xA9, 0x80}
   }
-  , 
+  ,
   {
     0x10, 0x00000228UL,
     {
     0xC0, 0x88, 0xCA, 0x00, 0x44, 0x06, 0x47, 0xF8, 0xFF, 0x00, 0x3D, 0x03,
         0xE7, 0xF8, 0xFF, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000238UL,
     {
     0x0D, 0x6B, 0xF6, 0x8C, 0x2A, 0x11, 0xA9, 0x80, 0x29, 0x81, 0x2D, 0x31,
         0x09, 0x81, 0x3D, 0x5E}
   }
-  , 
+  ,
   {
     0x10, 0x00000248UL,
     {
     0xF0, 0x4F, 0xF7, 0xF8, 0x2F, 0x11, 0xE6, 0x8C, 0x6E, 0x04, 0xF0, 0x6E,
         0xF2, 0xF5, 0x08, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00000258UL,
     {
     0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x06, 0x00, 0xF0, 0x6D,
         0xF2, 0xF5, 0x08, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00000268UL,
     {
     0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x07, 0x00, 0xE7, 0xFC,
         0x5E, 0x00, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x00000278UL,
     {
     0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x08, 0x00,
         0xE7, 0xFC, 0x2F, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000288UL,
     {
     0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xE4, 0xC4,
         0x04, 0x00, 0xE1, 0x9C}
   }
-  , 
+  ,
   {
     0x10, 0x00000298UL,
     {
     0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xB9, 0xC4,
         0x0D, 0x32, 0xF0, 0x4F}
   }
-  , 
+  ,
   {
     0x10, 0x000002A8UL,
     {
     0xF7, 0xF8, 0x2E, 0x11, 0xE6, 0x8C, 0x6E, 0x04, 0xF0, 0x6E, 0xF2, 0xF5,
         0x04, 0x11, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x000002B8UL,
     {
     0x02, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x06, 0x00, 0xF0, 0x6D, 0xF2, 0xF5,
         0x04, 0x11, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x000002C8UL,
     {
     0x02, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x07, 0x00, 0xE7, 0xFC, 0x5E, 0x00,
         0xF2, 0xF5, 0x04, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x000002D8UL,
     {
     0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x08, 0x00, 0xE7, 0xFC,
         0x2F, 0x00, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x000002E8UL,
     {
     0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x04, 0x00,
         0xE1, 0x9C, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x000002F8UL,
     {
     0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05, 0xB9, 0xC4, 0x0D, 0x03,
         0xE7, 0xF8, 0xFF, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000308UL,
     {
     0x0D, 0x03, 0xF2, 0x8C, 0x2A, 0x11, 0xE1, 0x18, 0x08, 0x02, 0xFC, 0xFF,
         0xFC, 0xFE, 0xFC, 0xFD}
   }
-  , 
+  ,
   {
     0x02, 0x00000318UL,
     {
     0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000031AUL,
     {
     0x88, 0xC0, 0x88, 0xB0, 0xF0, 0x48, 0x29, 0x81, 0x2D, 0x4F, 0x09, 0x81,
         0xEA, 0x30, 0x58, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x0000032AUL,
     {
     0xF0, 0x49, 0x49, 0x80, 0x3D, 0x22, 0xF0, 0x4A, 0x49, 0x80, 0x3D, 0x09,
         0xA8, 0x40, 0xF6, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x0000033AUL,
     {
     0x10, 0x11, 0xD4, 0x40, 0x04, 0x00, 0xF6, 0xF4, 0x18, 0x11, 0xEA, 0x00,
         0x5E, 0x04, 0xF0, 0x4A}
   }
-  , 
+  ,
   {
     0x10, 0x0000034AUL,
     {
     0x49, 0x81, 0x3D, 0x10, 0xA8, 0x40, 0xD4, 0x50, 0x02, 0x00, 0xF6, 0xF4,
         0x26, 0x11, 0xF6, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x0000035AUL,
     {
     0x28, 0x11, 0xD4, 0x40, 0x04, 0x00, 0xD4, 0x50, 0x06, 0x00, 0xF6, 0xF4,
         0xFE, 0x10, 0xF6, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x0000036AUL,
     {
     0x00, 0x11, 0x0D, 0x78, 0xE7, 0xF8, 0xFF, 0x00, 0x0D, 0x76, 0xF0, 0x49,
         0x49, 0x81, 0x3D, 0x21}
   }
-  , 
+  ,
   {
     0x10, 0x0000037AUL,
     {
     0xF0, 0x4A, 0x49, 0x80, 0x3D, 0x08, 0xA8, 0x40, 0xF6, 0xF4, 0x0C, 0x11,
         0xD4, 0x40, 0x04, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000038AUL,
     {
     0xF6, 0xF4, 0x14, 0x11, 0x0D, 0x67, 0xF0, 0x4A, 0x49, 0x81, 0x3D, 0x10,
         0xA8, 0x40, 0xD4, 0x50}
   }
-  , 
+  ,
   {
     0x10, 0x0000039AUL,
     {
     0x02, 0x00, 0xF6, 0xF4, 0x1E, 0x11, 0xF6, 0xF5, 0x20, 0x11, 0xD4, 0x40,
         0x04, 0x00, 0xD4, 0x50}
   }
-  , 
+  ,
   {
     0x10, 0x000003AAUL,
     {
     0x06, 0x00, 0xF6, 0xF4, 0xF6, 0x10, 0xF6, 0xF5, 0xF8, 0x10, 0x0D, 0x54,
         0xE7, 0xF8, 0xFF, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000003BAUL,
     {
     0x0D, 0x52, 0xE7, 0xF8, 0xFF, 0x00, 0x0D, 0x4F, 0xF0, 0x49, 0x49, 0x80,
         0x3D, 0x21, 0xF0, 0x4A}
   }
-  , 
+  ,
   {
     0x10, 0x000003CAUL,
     {
     0x49, 0x80, 0x3D, 0x08, 0xA8, 0x40, 0xF6, 0xF4, 0x0E, 0x11, 0xD4, 0x40,
         0x04, 0x00, 0xF6, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x000003DAUL,
     {
     0x16, 0x11, 0x0D, 0x40, 0xF0, 0x4A, 0x49, 0x81, 0x3D, 0x10, 0xA8, 0x40,
         0xD4, 0x50, 0x02, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000003EAUL,
     {
     0xF6, 0xF4, 0x22, 0x11, 0xF6, 0xF5, 0x24, 0x11, 0xD4, 0x40, 0x04, 0x00,
         0xD4, 0x50, 0x06, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000003FAUL,
     {
     0xF6, 0xF4, 0xFA, 0x10, 0xF6, 0xF5, 0xFC, 0x10, 0x0D, 0x2D, 0xE7, 0xF8,
         0xFF, 0x00, 0x0D, 0x2B}
   }
-  , 
+  ,
   {
     0x10, 0x0000040AUL,
     {
     0xF0, 0x49, 0x49, 0x81, 0x3D, 0x21, 0xF0, 0x4A, 0x49, 0x80, 0x3D, 0x08,
         0xA8, 0x40, 0xF6, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x0000041AUL,
     {
     0x0A, 0x11, 0xD4, 0x40, 0x04, 0x00, 0xF6, 0xF4, 0x12, 0x11, 0x0D, 0x1C,
         0xF0, 0x4A, 0x49, 0x81}
   }
-  , 
+  ,
   {
     0x10, 0x0000042AUL,
     {
     0x3D, 0x10, 0xA8, 0x40, 0xD4, 0x50, 0x02, 0x00, 0xF6, 0xF4, 0x1A, 0x11,
         0xF6, 0xF5, 0x1C, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x0000043AUL,
     {
     0xD4, 0x40, 0x04, 0x00, 0xD4, 0x50, 0x06, 0x00, 0xF6, 0xF4, 0xF2, 0x10,
         0xF6, 0xF5, 0xF4, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x0000044AUL,
     {
     0x0D, 0x09, 0xE7, 0xF8, 0xFF, 0x00, 0x0D, 0x07, 0xE7, 0xF8, 0xFF, 0x00,
         0x0D, 0x04, 0xE7, 0xF8}
   }
-  , 
+  ,
   {
     0x0A, 0x0000045AUL,
     {
     0xFF, 0x00, 0x0D, 0x01, 0xE1, 0x18, 0x08, 0x04, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000464UL,
     {
     0xEC, 0xFD, 0xEC, 0xFE, 0xEC, 0xFF, 0x28, 0x02, 0xF6, 0x8C, 0x2A, 0x11,
         0xF0, 0x48, 0x29, 0x81}
   }
-  , 
+  ,
   {
     0x10, 0x00000474UL,
     {
     0x2D, 0x47, 0x09, 0x81, 0xEA, 0x30, 0x8A, 0x05, 0xF3, 0xF8, 0x2D, 0x11,
         0x49, 0x81, 0x2D, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x00000484UL,
     {
     0xE7, 0xF8, 0xFF, 0x00, 0xEA, 0x00, 0x96, 0x05, 0xFE, 0x04, 0x1E, 0x05,
         0xF6, 0x8E, 0xEE, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000494UL,
     {
     0xF6, 0x8E, 0xEA, 0xFC, 0xF6, 0x8E, 0xE6, 0xFC, 0xCE, 0x04, 0x0D, 0x03,
         0xE0, 0x08, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000004A4UL,
     {
     0xFA, 0x20, 0xF0, 0x90, 0xE0, 0x08, 0xCA, 0x00, 0xA2, 0x20, 0xF0, 0xE4,
         0xF0, 0xF5, 0x70, 0x45}
   }
-  , 
+  ,
   {
     0x10, 0x000004B4UL,
     {
     0x3D, 0xF5, 0xCA, 0x00, 0x90, 0x26, 0xE0, 0x08, 0xCA, 0x00, 0xC6, 0x2A,
         0x49, 0x80, 0x3D, 0x03}
   }
-  , 
+  ,
   {
     0x10, 0x000004C4UL,
     {
     0xE0, 0x08, 0xCA, 0x00, 0xA4, 0x2A, 0xE6, 0x8C, 0x6E, 0x04, 0xE1, 0x9C,
         0xF2, 0xF5, 0x08, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x000004D4UL,
     {
     0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xB9, 0xC4, 0xE0, 0x8D, 0x0D, 0x07,
         0xF0, 0x6D, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x000004E4UL,
     {
     0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xB9, 0xC4, 0xF2, 0xF5,
         0x08, 0x11, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x000004F4UL,
     {
     0x06, 0x11, 0xDC, 0x05, 0xA9, 0x84, 0x8A, 0xF4, 0xF1, 0x00, 0xCA, 0x00,
         0x9A, 0x26, 0x0D, 0x46}
   }
-  , 
+  ,
   {
     0x10, 0x00000504UL,
     {
     0xF3, 0xF8, 0x2C, 0x11, 0x49, 0x81, 0x2D, 0x03, 0xE7, 0xF8, 0xFF, 0x00,
         0x0D, 0x42, 0xEE, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x00000514UL,
     {
     0x0E, 0x05, 0xF6, 0x8E, 0xEC, 0xFC, 0xF6, 0x8E, 0xE8, 0xFC, 0xF6, 0x8E,
         0xE4, 0xFC, 0xBE, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x00000524UL,
     {
     0x0D, 0x03, 0xE0, 0x18, 0xCA, 0x00, 0xFA, 0x20, 0xF0, 0x90, 0xE0, 0x18,
         0xCA, 0x00, 0xA2, 0x20}
   }
-  , 
+  ,
   {
     0x10, 0x00000534UL,
     {
     0xF0, 0xE4, 0xF0, 0xF5, 0x70, 0x45, 0x3D, 0xF5, 0xCA, 0x00, 0x90, 0x26,
         0xE0, 0x18, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000544UL,
     {
     0xC6, 0x2A, 0x49, 0x80, 0x3D, 0x03, 0xE0, 0x18, 0xCA, 0x00, 0xA4, 0x2A,
         0xE6, 0x8C, 0x6E, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x00000554UL,
     {
     0xE1, 0x9C, 0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05,
         0xB9, 0xC4, 0xE0, 0x8D}
   }
-  , 
+  ,
   {
     0x10, 0x00000564UL,
     {
     0x0D, 0x07, 0xF0, 0x6D, 0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11,
         0xDC, 0x05, 0xB9, 0xC4}
   }
-  , 
+  ,
   {
     0x10, 0x00000574UL,
     {
     0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05, 0xA9, 0x84,
         0x8A, 0xF4, 0xF1, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000584UL,
     {
     0xCA, 0x00, 0x9A, 0x26, 0x0D, 0x03, 0xE7, 0xF8, 0xFF, 0x00, 0x0D, 0x03,
         0xF2, 0x8C, 0x2A, 0x11}
   }
-  , 
+  ,
   {
     0x0C, 0x00000594UL,
     {
     0xE1, 0x18, 0x08, 0x02, 0xFC, 0xFF, 0xFC, 0xFE, 0xFC, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000005A0UL,
     {
     0xF6, 0x8C, 0x2A, 0x11, 0xF0, 0x48, 0x29, 0x81, 0x2D, 0x24, 0x09, 0x81,
         0x3D, 0x44, 0xF3, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x000005B0UL,
     {
     0x2D, 0x11, 0x49, 0x81, 0x2D, 0x03, 0xE7, 0xF8, 0xFF, 0x00, 0xCB, 0x00,
         0xE6, 0x8C, 0x6E, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x000005C0UL,
     {
     0xCA, 0x00, 0x90, 0x26, 0xE1, 0x2C, 0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4,
         0x06, 0x11, 0xDC, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x000005D0UL,
     {
     0xE4, 0xC4, 0x01, 0x00, 0xF2, 0xF9, 0x08, 0x11, 0xF2, 0xF8, 0x06, 0x11,
         0xDC, 0x09, 0xF4, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x000005E0UL,
     {
     0x02, 0x00, 0x9A, 0xF4, 0xF7, 0x20, 0xE1, 0x1C, 0xDC, 0x09, 0xB9, 0xC8,
         0xCA, 0x00, 0x9A, 0x26}
   }
-  , 
+  ,
   {
     0x10, 0x000005F0UL,
     {
     0x0D, 0x25, 0xF3, 0xF8, 0x2C, 0x11, 0x49, 0x81, 0x2D, 0x03, 0xE7, 0xF8,
         0xFF, 0x00, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000600UL,
     {
     0xE6, 0x8C, 0x6E, 0x04, 0xCA, 0x00, 0x90, 0x26, 0xE1, 0x2C, 0xF2, 0xF5,
         0x04, 0x11, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00000610UL,
     {
     0x02, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x01, 0x00, 0xF2, 0xF9, 0x04, 0x11,
         0xF2, 0xF8, 0x02, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00000620UL,
     {
     0xDC, 0x09, 0xF4, 0x88, 0x02, 0x00, 0x9A, 0xF4, 0xF7, 0x20, 0xE1, 0x1C,
         0xDC, 0x09, 0xB9, 0xC8}
   }
-  , 
+  ,
   {
     0x10, 0x00000630UL,
     {
     0xCA, 0x00, 0x9A, 0x26, 0x0D, 0x03, 0xE7, 0xF8, 0xFF, 0x00, 0xCB, 0x00,
         0xF2, 0x8C, 0x2A, 0x11}
   }
-  , 
+  ,
   {
     0x04, 0x00000640UL,
     {
     0xE1, 0x18, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000644UL,
     {
     0xEC, 0xFE, 0xEC, 0xFF, 0x28, 0x02, 0xF6, 0x8C, 0x2A, 0x11, 0xF0, 0x48,
         0x29, 0x81, 0xEA, 0x20}
   }
-  , 
+  ,
   {
     0x10, 0x00000654UL,
     {
     0x6C, 0x07, 0x09, 0x81, 0xEA, 0x30, 0x76, 0x08, 0xF3, 0xF8, 0x2D, 0x11,
         0x49, 0x81, 0x2D, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x00000664UL,
     {
     0xE7, 0xF8, 0xFF, 0x00, 0xEA, 0x00, 0x82, 0x08, 0xCA, 0x00, 0x90, 0x26,
         0x5E, 0xE6, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000674UL,
     {
     0x8A, 0x0D, 0x5F, 0xE6, 0xCA, 0x00, 0x8A, 0x0D, 0xE6, 0x8C, 0x6E, 0x04,
         0xE7, 0xFC, 0x80, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000684UL,
     {
     0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xE4, 0xC4,
         0x1F, 0x00, 0xE7, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000694UL,
     {
     0xFF, 0x00, 0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05,
         0xE4, 0xC4, 0x10, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000006A4UL,
     {
     0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xE4, 0xC4,
         0x11, 0x00, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x000006B4UL,
     {
     0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x12, 0x00,
         0xF2, 0xF5, 0x08, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x000006C4UL,
     {
     0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x13, 0x00, 0xF2, 0xF5,
         0x08, 0x11, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x000006D4UL,
     {
     0x06, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x14, 0x00, 0xF2, 0xF5, 0x08, 0x11,
         0xF2, 0xF4, 0x06, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x000006E4UL,
     {
     0xDC, 0x05, 0xE4, 0xC4, 0x15, 0x00, 0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4,
         0x06, 0x11, 0xDC, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x000006F4UL,
     {
     0xE4, 0xC4, 0x16, 0x00, 0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11,
         0xDC, 0x05, 0xE4, 0xC4}
   }
-  , 
+  ,
   {
     0x10, 0x00000704UL,
     {
     0x17, 0x00, 0xCA, 0x00, 0x9A, 0x26, 0xFE, 0x04, 0x1E, 0x05, 0xF6, 0x8E,
         0xEE, 0xFC, 0xF6, 0x8E}
   }
-  , 
+  ,
   {
     0x10, 0x00000714UL,
     {
     0xEA, 0xFC, 0xF6, 0x8E, 0xE6, 0xFC, 0xCE, 0x04, 0xF6, 0x8E, 0x10, 0x11,
         0xF6, 0x8E, 0x18, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00000724UL,
     {
     0xF6, 0x8E, 0x0C, 0x11, 0xF6, 0x8E, 0x14, 0x11, 0xF6, 0x8E, 0x26, 0x11,
         0xF6, 0x8E, 0x28, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00000734UL,
     {
     0xF6, 0x8E, 0xFE, 0x10, 0xF6, 0x8E, 0x00, 0x11, 0xF6, 0x8E, 0x1E, 0x11,
         0xF6, 0x8E, 0x20, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00000744UL,
     {
     0xF6, 0x8E, 0xF6, 0x10, 0xF6, 0x8E, 0xF8, 0x10, 0x0D, 0x03, 0xE0, 0x08,
         0xCA, 0x00, 0xFA, 0x20}
   }
-  , 
+  ,
   {
     0x10, 0x00000754UL,
     {
     0xF0, 0x90, 0xE0, 0x08, 0xCA, 0x00, 0xA2, 0x20, 0xF0, 0x64, 0xF0, 0x75,
         0xF0, 0xE4, 0xF0, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x00000764UL,
     {
     0x70, 0x65, 0x3D, 0xF3, 0xEA, 0x00, 0x7C, 0x08, 0xF3, 0xF8, 0x2C, 0x11,
         0x49, 0x81, 0x2D, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x00000774UL,
     {
     0xE7, 0xF8, 0xFF, 0x00, 0xEA, 0x00, 0x82, 0x08, 0x6E, 0xE6, 0xCA, 0x00,
         0x8A, 0x0D, 0x6F, 0xE6}
   }
-  , 
+  ,
   {
     0x10, 0x00000784UL,
     {
     0xCA, 0x00, 0x8A, 0x0D, 0xE6, 0x8C, 0x6E, 0x04, 0xCA, 0x00, 0x90, 0x26,
         0xE7, 0xFC, 0x80, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000794UL,
     {
     0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05, 0xE4, 0xC4,
         0x1F, 0x00, 0xE7, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x000007A4UL,
     {
     0xFF, 0x00, 0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05,
         0xE4, 0xC4, 0x10, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000007B4UL,
     {
     0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05, 0xE4, 0xC4,
         0x11, 0x00, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x000007C4UL,
     {
     0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x12, 0x00,
         0xF2, 0xF5, 0x04, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x000007D4UL,
     {
     0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x13, 0x00, 0xF2, 0xF5,
         0x04, 0x11, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x000007E4UL,
     {
     0x02, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x14, 0x00, 0xF2, 0xF5, 0x04, 0x11,
         0xF2, 0xF4, 0x02, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x000007F4UL,
     {
     0xDC, 0x05, 0xE4, 0xC4, 0x15, 0x00, 0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4,
         0x02, 0x11, 0xDC, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x00000804UL,
     {
     0xE4, 0xC4, 0x16, 0x00, 0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11,
         0xDC, 0x05, 0xE4, 0xC4}
   }
-  , 
+  ,
   {
     0x10, 0x00000814UL,
     {
     0x17, 0x00, 0xCA, 0x00, 0x9A, 0x26, 0xEE, 0x04, 0x0E, 0x05, 0xF6, 0x8E,
         0xEC, 0xFC, 0xF6, 0x8E}
   }
-  , 
+  ,
   {
     0x10, 0x00000824UL,
     {
     0xE8, 0xFC, 0xF6, 0x8E, 0xE4, 0xFC, 0xBE, 0x04, 0xF6, 0x8E, 0x0E, 0x11,
         0xF6, 0x8E, 0x16, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00000834UL,
     {
     0xF6, 0x8E, 0x0A, 0x11, 0xF6, 0x8E, 0x12, 0x11, 0xF6, 0x8E, 0x22, 0x11,
         0xF6, 0x8E, 0x24, 0x11}
   }
-  , 
+  ,
   {
     0x0C, 0x00000844UL,
     {
     0xF6, 0x8E, 0xFA, 0x10, 0xF6, 0x8E, 0xFC, 0x10, 0xF6, 0x8E, 0x1A, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00000850UL,
     {
     0xF6, 0x8E, 0x1C, 0x11, 0xF6, 0x8E, 0xF2, 0x10, 0xF6, 0x8E, 0xF4, 0x10,
         0x0D, 0x03, 0xE0, 0x18}
   }
-  , 
+  ,
   {
     0x10, 0x00000860UL,
     {
     0xCA, 0x00, 0xFA, 0x20, 0xF0, 0x90, 0xE0, 0x18, 0xCA, 0x00, 0xA2, 0x20,
         0xF0, 0x64, 0xF0, 0x75}
   }
-  , 
+  ,
   {
     0x10, 0x00000870UL,
     {
     0x70, 0x65, 0x3D, 0xF5, 0x0D, 0x03, 0xE7, 0xF8, 0xFF, 0x00, 0x0D, 0x03,
         0xF2, 0x8C, 0x2A, 0x11}
   }
-  , 
+  ,
   {
     0x0A, 0x00000880UL,
     {
     0xE1, 0x18, 0x08, 0x02, 0xFC, 0xFF, 0xFC, 0xFE, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000088AUL,
     {
     0xEC, 0xFD, 0xEC, 0xFE, 0xEC, 0xFF, 0xF0, 0xE9, 0xF0, 0xFA, 0xF6, 0x8C,
         0x2A, 0x11, 0xF0, 0x48}
   }
-  , 
+  ,
   {
     0x10, 0x0000089AUL,
     {
     0x29, 0x81, 0x2D, 0x7D, 0x09, 0x81, 0xEA, 0x30, 0x8C, 0x0A, 0xE6, 0x8C,
         0x6E, 0x04, 0xDC, 0x0F}
   }
-  , 
+  ,
   {
     0x10, 0x000008AAUL,
     {
     0xF4, 0xAE, 0x05, 0x00, 0xF0, 0xD5, 0xC0, 0xA5, 0x7C, 0x75, 0x9A, 0xF5,
         0x3D, 0x00, 0xF0, 0x6D}
   }
-  , 
+  ,
   {
     0x10, 0x000008BAUL,
     {
     0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xE4, 0xC4,
         0x10, 0x00, 0xDC, 0x0F}
   }
-  , 
+  ,
   {
     0x10, 0x000008CAUL,
     {
     0xF4, 0x8E, 0x06, 0x00, 0xF2, 0xF7, 0x08, 0x11, 0xF2, 0xF6, 0x06, 0x11,
         0xDC, 0x07, 0xE4, 0x86}
   }
-  , 
+  ,
   {
     0x10, 0x000008DAUL,
     {
     0x11, 0x00, 0xDC, 0x0F, 0xF4, 0x8E, 0x07, 0x00, 0xF2, 0xF7, 0x08, 0x11,
         0xF2, 0xF6, 0x06, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x000008EAUL,
     {
     0xDC, 0x07, 0xE4, 0x86, 0x12, 0x00, 0xDC, 0x0F, 0xF4, 0x8E, 0x08, 0x00,
         0xF2, 0xF7, 0x08, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x000008FAUL,
     {
     0xF2, 0xF6, 0x06, 0x11, 0xDC, 0x07, 0xE4, 0x86, 0x13, 0x00, 0xDC, 0x0F,
         0xF4, 0x8E, 0x09, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000090AUL,
     {
     0xF2, 0xF7, 0x08, 0x11, 0xF2, 0xF6, 0x06, 0x11, 0xDC, 0x07, 0xE4, 0x86,
         0x14, 0x00, 0xF0, 0xAE}
   }
-  , 
+  ,
   {
     0x10, 0x0000091AUL,
     {
     0x06, 0xFA, 0x0A, 0x00, 0xF0, 0xBF, 0xF2, 0xF9, 0x08, 0x11, 0xF2, 0xF8,
         0x06, 0x11, 0x06, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x0000092AUL,
     {
     0x15, 0x00, 0xCA, 0x00, 0x30, 0x29, 0x0D, 0x2A, 0xF0, 0x6D, 0x67, 0xFC,
         0x7F, 0x00, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x0000093AUL,
     {
     0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x10, 0x00,
         0xDC, 0x0F, 0xF4, 0x8E}
   }
-  , 
+  ,
   {
     0x10, 0x0000094AUL,
     {
     0x06, 0x00, 0xF2, 0xF7, 0x08, 0x11, 0xF2, 0xF6, 0x06, 0x11, 0xDC, 0x07,
         0xE4, 0x86, 0x11, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000095AUL,
     {
     0xDC, 0x0F, 0xF4, 0x8E, 0x07, 0x00, 0xF2, 0xF7, 0x08, 0x11, 0xF2, 0xF6,
         0x06, 0x11, 0xDC, 0x07}
   }
-  , 
+  ,
   {
     0x10, 0x0000096AUL,
     {
     0xE4, 0x86, 0x12, 0x00, 0xF0, 0xAE, 0x06, 0xFA, 0x08, 0x00, 0xF0, 0xBF,
         0xF2, 0xF9, 0x08, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x0000097AUL,
     {
     0xF2, 0xF8, 0x06, 0x11, 0x06, 0xF8, 0x13, 0x00, 0xCA, 0x00, 0x30, 0x29,
         0xE1, 0x1C, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x0000098AUL,
     {
     0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x01, 0x00,
         0x0D, 0x7D, 0xE6, 0x8C}
   }
-  , 
+  ,
   {
     0x10, 0x0000099AUL,
     {
     0x6E, 0x04, 0xDC, 0x0F, 0xF4, 0xAE, 0x05, 0x00, 0xF0, 0xD5, 0xC0, 0xA5,
         0x7C, 0x75, 0x9A, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x000009AAUL,
     {
     0x3D, 0x00, 0xF0, 0x6D, 0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11,
         0xDC, 0x05, 0xE4, 0xC4}
   }
-  , 
+  ,
   {
     0x10, 0x000009BAUL,
     {
     0x10, 0x00, 0xDC, 0x0F, 0xF4, 0x8E, 0x06, 0x00, 0xF2, 0xF7, 0x04, 0x11,
         0xF2, 0xF6, 0x02, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x000009CAUL,
     {
     0xDC, 0x07, 0xE4, 0x86, 0x11, 0x00, 0xDC, 0x0F, 0xF4, 0x8E, 0x07, 0x00,
         0xF2, 0xF7, 0x04, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x000009DAUL,
     {
     0xF2, 0xF6, 0x02, 0x11, 0xDC, 0x07, 0xE4, 0x86, 0x12, 0x00, 0xDC, 0x0F,
         0xF4, 0x8E, 0x08, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000009EAUL,
     {
     0xF2, 0xF7, 0x04, 0x11, 0xF2, 0xF6, 0x02, 0x11, 0xDC, 0x07, 0xE4, 0x86,
         0x13, 0x00, 0xDC, 0x0F}
   }
-  , 
+  ,
   {
     0x10, 0x000009FAUL,
     {
     0xF4, 0x8E, 0x09, 0x00, 0xF2, 0xF7, 0x04, 0x11, 0xF2, 0xF6, 0x02, 0x11,
         0xDC, 0x07, 0xE4, 0x86}
   }
-  , 
+  ,
   {
     0x10, 0x00000A0AUL,
     {
     0x14, 0x00, 0xF0, 0xAE, 0x06, 0xFA, 0x0A, 0x00, 0xF0, 0xBF, 0xF2, 0xF9,
         0x04, 0x11, 0xF2, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x00000A1AUL,
     {
     0x02, 0x11, 0x06, 0xF8, 0x15, 0x00, 0xCA, 0x00, 0x30, 0x29, 0x0D, 0x2A,
         0xF0, 0x6D, 0x67, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000A2AUL,
     {
     0x7F, 0x00, 0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05,
         0xE4, 0xC4, 0x10, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000A3AUL,
     {
     0xDC, 0x0F, 0xF4, 0x8E, 0x06, 0x00, 0xF2, 0xF7, 0x04, 0x11, 0xF2, 0xF6,
         0x02, 0x11, 0xDC, 0x07}
   }
-  , 
+  ,
   {
     0x10, 0x00000A4AUL,
     {
     0xE4, 0x86, 0x11, 0x00, 0xDC, 0x0F, 0xF4, 0x8E, 0x07, 0x00, 0xF2, 0xF7,
         0x04, 0x11, 0xF2, 0xF6}
   }
-  , 
+  ,
   {
     0x10, 0x00000A5AUL,
     {
     0x02, 0x11, 0xDC, 0x07, 0xE4, 0x86, 0x12, 0x00, 0xF0, 0xAE, 0x06, 0xFA,
         0x08, 0x00, 0xF0, 0xBF}
   }
-  , 
+  ,
   {
     0x10, 0x00000A6AUL,
     {
     0xF2, 0xF9, 0x04, 0x11, 0xF2, 0xF8, 0x02, 0x11, 0x06, 0xF8, 0x13, 0x00,
         0xCA, 0x00, 0x30, 0x29}
   }
-  , 
+  ,
   {
     0x10, 0x00000A7AUL,
     {
     0xE1, 0x1C, 0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05,
         0xE4, 0xC4, 0x01, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000A8AUL,
     {
     0x0D, 0x03, 0xE7, 0xF8, 0xFF, 0x00, 0x0D, 0x03, 0xF2, 0x8C, 0x2A, 0x11,
         0xE1, 0x18, 0xFC, 0xFF}
   }
-  , 
+  ,
   {
     0x06, 0x00000A9AUL,
     {
     0xFC, 0xFE, 0xFC, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000AA0UL,
     {
     0xEC, 0xFD, 0xEC, 0xFE, 0xEC, 0xFF, 0xE0, 0x0D, 0xF6, 0x8C, 0x2A, 0x11,
         0xF0, 0x48, 0x29, 0x81}
   }
-  , 
+  ,
   {
     0x10, 0x00000AB0UL,
     {
     0x2D, 0x3E, 0x09, 0x81, 0x3D, 0x78, 0xF3, 0xF8, 0x2D, 0x11, 0x49, 0x81,
         0x3D, 0x35, 0xE6, 0x8C}
   }
-  , 
+  ,
   {
     0x10, 0x00000AC0UL,
     {
     0x6E, 0x04, 0xF2, 0xF7, 0x08, 0x11, 0xF2, 0xF6, 0x06, 0x11, 0xDC, 0x07,
         0xF4, 0x86, 0x02, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000AD0UL,
     {
     0xF0, 0xE4, 0x66, 0xFE, 0xD6, 0x00, 0xDC, 0x07, 0xA9, 0x86, 0xF0, 0xF4,
         0x68, 0xF1, 0xF0, 0x4F}
   }
-  , 
+  ,
   {
     0x10, 0x00000AE0UL,
     {
     0x49, 0x80, 0x2D, 0x01, 0xE0, 0x1D, 0x9A, 0xFE, 0x01, 0x60, 0x78, 0xD2,
         0x9A, 0xFE, 0x01, 0x70}
   }
-  , 
+  ,
   {
     0x10, 0x00000AF0UL,
     {
     0x78, 0xD4, 0x9A, 0xFE, 0x01, 0x10, 0x3F, 0xFD, 0x9A, 0xFE, 0x04, 0x40,
         0xF0, 0x4F, 0x49, 0x80}
   }
-  , 
+  ,
   {
     0x10, 0x00000B00UL,
     {
     0x3D, 0x01, 0x4F, 0xFD, 0xF0, 0x4E, 0x69, 0x84, 0xC0, 0x84, 0x3D, 0x04,
         0xF0, 0x4F, 0x49, 0x80}
   }
-  , 
+  ,
   {
     0x10, 0x00000B10UL,
     {
     0x3D, 0x01, 0x5F, 0xFD, 0x9A, 0x04, 0x01, 0xC0, 0x8F, 0xFD, 0xBB, 0x4E,
         0xF0, 0x64, 0xF0, 0x75}
   }
-  , 
+  ,
   {
     0x10, 0x00000B20UL,
     {
     0x70, 0x65, 0x3D, 0x43, 0x9F, 0xFD, 0x0D, 0x41, 0xE6, 0xFD, 0xFF, 0xFF,
         0x0D, 0x3E, 0xF3, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x00000B30UL,
     {
     0x2C, 0x11, 0x49, 0x81, 0x3D, 0x35, 0xE6, 0x8C, 0x6E, 0x04, 0xF2, 0xF7,
         0x04, 0x11, 0xF2, 0xF6}
   }
-  , 
+  ,
   {
     0x10, 0x00000B40UL,
     {
     0x02, 0x11, 0xDC, 0x07, 0xF4, 0x86, 0x02, 0x00, 0xF0, 0xE4, 0x66, 0xFE,
         0xD6, 0x00, 0xDC, 0x07}
   }
-  , 
+  ,
   {
     0x10, 0x00000B50UL,
     {
     0xA9, 0x86, 0xF0, 0xF4, 0x68, 0xF1, 0xF0, 0x4F, 0x49, 0x80, 0x2D, 0x01,
         0xE0, 0x1D, 0x9A, 0xFE}
   }
-  , 
+  ,
   {
     0x10, 0x00000B60UL,
     {
     0x01, 0x60, 0x78, 0xD2, 0x9A, 0xFE, 0x01, 0x70, 0x78, 0xD4, 0x9A, 0xFE,
         0x01, 0x10, 0x3F, 0xFD}
   }
-  , 
+  ,
   {
     0x10, 0x00000B70UL,
     {
     0x9A, 0xFE, 0x04, 0x40, 0xF0, 0x4F, 0x49, 0x80, 0x3D, 0x01, 0x4F, 0xFD,
         0xF0, 0x4E, 0x69, 0x84}
   }
-  , 
+  ,
   {
     0x10, 0x00000B80UL,
     {
     0xC0, 0x84, 0x3D, 0x04, 0xF0, 0x4F, 0x49, 0x80, 0x3D, 0x01, 0x5F, 0xFD,
         0x9A, 0x04, 0x01, 0xB0}
   }
-  , 
+  ,
   {
     0x10, 0x00000B90UL,
     {
     0x8F, 0xFD, 0xBB, 0x2A, 0xF0, 0x64, 0xF0, 0x75, 0x70, 0x65, 0x3D, 0x07,
         0x9F, 0xFD, 0x0D, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x00000BA0UL,
     {
     0xE6, 0xFD, 0xFF, 0xFF, 0x0D, 0x02, 0xE6, 0xFD, 0xFF, 0xFF, 0xF2, 0x8C,
         0x2A, 0x11, 0xF0, 0x4D}
   }
-  , 
+  ,
   {
     0x08, 0x00000BB0UL,
     {
     0xFC, 0xFF, 0xFC, 0xFE, 0xFC, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000BB8UL,
     {
     0xF2, 0xF4, 0xE6, 0xFC, 0x3D, 0x03, 0xE0, 0x04, 0xE0, 0x05, 0xCB, 0x00,
         0xF2, 0xF5, 0xEE, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000BC8UL,
     {
     0xE6, 0xF4, 0x12, 0x00, 0x1B, 0x54, 0xF2, 0xF9, 0x0C, 0xFE, 0xF2, 0xF8,
         0x0E, 0xFE, 0xE6, 0xF6}
   }
-  , 
+  ,
   {
     0x10, 0x00000BD8UL,
     {
     0x20, 0xFD, 0xE6, 0xF7, 0x02, 0x00, 0xF0, 0x46, 0x00, 0x48, 0xF0, 0x57,
         0x10, 0x59, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000BE8UL,
     {
     0xF2, 0xF4, 0xE4, 0xFC, 0x3D, 0x03, 0xE0, 0x04, 0xE0, 0x05, 0xCB, 0x00,
         0xF2, 0xF5, 0xEC, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000BF8UL,
     {
     0xE6, 0xF4, 0x12, 0x00, 0x1B, 0x54, 0xF2, 0xF9, 0x0C, 0xFE, 0xF2, 0xF8,
         0x0E, 0xFE, 0xE6, 0xF6}
   }
-  , 
+  ,
   {
     0x10, 0x00000C08UL,
     {
     0x00, 0x00, 0xE6, 0xF7, 0x02, 0x00, 0xF0, 0x46, 0x00, 0x48, 0xF0, 0x57,
         0x10, 0x59, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000C18UL,
     {
     0x24, 0x8F, 0xEE, 0xFC, 0xF2, 0xF4, 0xEE, 0xFC, 0x46, 0xF4, 0x10, 0x0E,
         0x3D, 0x02, 0xF6, 0x8E}
   }
-  , 
+  ,
   {
     0x0C, 0x00000C28UL,
     {
     0xEE, 0xFC, 0x6E, 0xC8, 0x04, 0x8F, 0xE6, 0xFC, 0x6F, 0xC8, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000C34UL,
     {
     0x24, 0x8F, 0xEC, 0xFC, 0xF2, 0xF4, 0xEC, 0xFC, 0x46, 0xF4, 0x10, 0x0E,
         0x3D, 0x02, 0xF6, 0x8E}
   }
-  , 
+  ,
   {
     0x0C, 0x00000C44UL,
     {
     0xEC, 0xFC, 0x6E, 0xC9, 0x04, 0x8F, 0xE4, 0xFC, 0x6F, 0xC9, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000C50UL,
     {
     0xF6, 0x8C, 0x2A, 0x11, 0xF3, 0xF8, 0x2D, 0x11, 0x49, 0x81, 0x3D, 0x30,
         0xE6, 0x8C, 0x6E, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x00000C60UL,
     {
     0xF2, 0xF7, 0x08, 0x11, 0xF2, 0xF6, 0x06, 0x11, 0xDC, 0x07, 0xF4, 0x86,
         0x02, 0x00, 0xC0, 0x84}
   }
-  , 
+  ,
   {
     0x10, 0x00000C70UL,
     {
     0x66, 0xF4, 0x30, 0x00, 0x48, 0x40, 0xBD, 0x02, 0x24, 0x8F, 0xE2, 0xFC,
         0xDC, 0x07, 0xA9, 0x86}
   }
-  , 
+  ,
   {
     0x10, 0x00000C80UL,
     {
     0x9A, 0xF4, 0x08, 0x00, 0xE7, 0xF8, 0x64, 0x00, 0xF7, 0xF8, 0xF1, 0xFC,
         0xF6, 0x8E, 0xE2, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000C90UL,
     {
     0xF7, 0x8E, 0xF4, 0xFC, 0x05, 0x8F, 0xF1, 0xFC, 0xF3, 0xF8, 0xF1, 0xFC,
         0x49, 0x80, 0x3D, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x00000CA0UL,
     {
     0xC2, 0xF4, 0xF4, 0xFC, 0x02, 0xF4, 0xE2, 0xFC, 0x7C, 0x14, 0xF7, 0xF8,
         0xF4, 0xFC, 0xE7, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x00000CB0UL,
     {
     0x64, 0x00, 0xF7, 0xF8, 0xF1, 0xFC, 0xF6, 0x8E, 0xE2, 0xFC, 0x0D, 0x02,
         0xF7, 0x8E, 0xF4, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000CC0UL,
     {
     0xF3, 0xF8, 0x2C, 0x11, 0x49, 0x81, 0x3D, 0x30, 0xE6, 0x8C, 0x6E, 0x04,
         0xF2, 0xF7, 0x04, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00000CD0UL,
     {
     0xF2, 0xF6, 0x02, 0x11, 0xDC, 0x07, 0xF4, 0x86, 0x02, 0x00, 0xC0, 0x84,
         0x66, 0xF4, 0x30, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000CE0UL,
     {
     0x48, 0x40, 0xBD, 0x02, 0x24, 0x8F, 0xE0, 0xFC, 0xDC, 0x07, 0xA9, 0x86,
         0x9A, 0xF4, 0x08, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000CF0UL,
     {
     0xE7, 0xF8, 0x64, 0x00, 0xF7, 0xF8, 0xF0, 0xFC, 0xF6, 0x8E, 0xE0, 0xFC,
         0xF7, 0x8E, 0xF3, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000D00UL,
     {
     0x05, 0x8F, 0xF0, 0xFC, 0xF3, 0xF8, 0xF0, 0xFC, 0x49, 0x80, 0x3D, 0x10,
         0xC2, 0xF4, 0xF3, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000D10UL,
     {
     0x02, 0xF4, 0xE0, 0xFC, 0x7C, 0x14, 0xF7, 0xF8, 0xF3, 0xFC, 0xE7, 0xF8,
         0x64, 0x00, 0xF7, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x00000D20UL,
     {
     0xF0, 0xFC, 0xF6, 0x8E, 0xE0, 0xFC, 0x0D, 0x02, 0xF7, 0x8E, 0xF3, 0xFC,
         0xF2, 0x8C, 0x2A, 0x11}
   }
-  , 
+  ,
   {
     0x0C, 0x00000D30UL,
     {
     0xE0, 0x89, 0xC2, 0xF8, 0xF2, 0xFC, 0xCA, 0x00, 0x00, 0x27, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000D3CUL,
     {
     0xE1, 0x0C, 0xF6, 0x8C, 0x2A, 0x11, 0xF0, 0x48, 0x29, 0x81, 0x2D, 0x10,
         0x09, 0x81, 0x3D, 0x1B}
   }
-  , 
+  ,
   {
     0x10, 0x00000D4CUL,
     {
     0xE6, 0x8C, 0x6E, 0x04, 0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11,
         0xDC, 0x05, 0xF4, 0x84}
   }
-  , 
+  ,
   {
     0x10, 0x00000D5CUL,
     {
     0x03, 0x00, 0x47, 0xF8, 0xE0, 0x00, 0x3D, 0x0F, 0xE1, 0x1C, 0x0D, 0x0D,
         0xE6, 0x8C, 0x6E, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x00000D6CUL,
     {
     0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05, 0xF4, 0x84,
         0x03, 0x00, 0x47, 0xF8}
   }
-  , 
+  ,
   {
     0x0E, 0x00000D7CUL,
     {
     0xE0, 0x00, 0x3D, 0x01, 0xE1, 0x1C, 0xF2, 0x8C, 0x2A, 0x11, 0xF1, 0x8C,
         0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x0A, 0x00000D8AUL,
     {
     0xE0, 0x05, 0x86, 0xF5, 0xE7, 0x03, 0x8D, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x02, 0x00002BC6UL,
     {
     0x04, 0x8D}
   }
-  , 
+  ,
   {
     0x02, 0x00002BC8UL,
     {
     0x04, 0x8E}
   }
-  , 
+  ,
   {
     0x02, 0x00002BCAUL,
     {
     0x04, 0x8F}
   }
-  , 
+  ,
   {
     0x02, 0x00002BCCUL,
     {
     0x05, 0x80}
   }
-  , 
+  ,
   {
     0x02, 0x00002BCEUL,
     {
     0x05, 0x81}
   }
-  , 
+  ,
   {
     0x10, 0x00000D94UL,
     {
     0xC6, 0x03, 0x03, 0x00, 0xCC, 0x00, 0xF6, 0xF0, 0x20, 0xFC, 0xC6, 0x08,
         0x20, 0xFC, 0xCC, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000DA4UL,
     {
     0xEC, 0x00, 0xC6, 0x87, 0x10, 0x00, 0xEC, 0x06, 0xEC, 0x07, 0xF6, 0x8C,
         0xFA, 0xFC, 0xE6, 0x8C}
   }
-  , 
+  ,
   {
     0x10, 0x00000DB4UL,
     {
     0x6E, 0x04, 0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05,
         0xF4, 0x84, 0x03, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000DC4UL,
     {
     0xF7, 0xF8, 0x58, 0x11, 0xF3, 0xF8, 0x58, 0x11, 0x9A, 0xF4, 0x18, 0x00,
         0xF2, 0xF4, 0xE6, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000DD4UL,
     {
     0x46, 0xF4, 0x10, 0x0E, 0x2D, 0x0A, 0xF2, 0xFA, 0x08, 0x11, 0xF2, 0xF9,
         0x06, 0x11, 0x06, 0xF9}
   }
-  , 
+  ,
   {
     0x10, 0x00000DE4UL,
     {
     0x10, 0x00, 0xE0, 0x08, 0xCA, 0x00, 0x48, 0x11, 0x0D, 0x01, 0xCF, 0x04,
         0xE1, 0x4C, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x00000DF4UL,
     {
     0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x01, 0x00,
         0xF3, 0xF8, 0x58, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00000E04UL,
     {
     0x9A, 0xF4, 0x03, 0x10, 0xE0, 0x08, 0xCA, 0x00, 0xA4, 0x2A, 0xC2, 0xF4,
         0x58, 0x11, 0x66, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00000E14UL,
     {
     0x2C, 0x00, 0xEA, 0x20, 0x44, 0x0F, 0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4,
         0x06, 0x11, 0xDC, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x00000E24UL,
     {
     0xF4, 0x84, 0x02, 0x00, 0xF7, 0xF8, 0x59, 0x11, 0xF3, 0xF8, 0x59, 0x11,
         0x9A, 0xF4, 0x04, 0x70}
   }
-  , 
+  ,
   {
     0x10, 0x00000E34UL,
     {
     0x8A, 0x04, 0x02, 0xF0, 0xFF, 0x04, 0xDF, 0x04, 0xF3, 0xF8, 0x59, 0x11,
         0x9A, 0xF4, 0x02, 0x60}
   }
-  , 
+  ,
   {
     0x10, 0x00000E44UL,
     {
     0x9A, 0x05, 0x08, 0x10, 0xF3, 0xF8, 0x59, 0x11, 0x67, 0xF8, 0x40, 0x00,
         0xC0, 0x84, 0x3D, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x00000E54UL,
     {
     0x9A, 0x05, 0x03, 0x10, 0x3A, 0x05, 0x05, 0x11, 0xDF, 0x04, 0xF3, 0xF8,
         0x58, 0x11, 0x9A, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00000E64UL,
     {
     0x13, 0x30, 0xDF, 0x04, 0xE1, 0x4C, 0x0D, 0x07, 0xF2, 0xF5, 0x08, 0x11,
         0xF2, 0xF4, 0x06, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00000E74UL,
     {
     0xDC, 0x05, 0xE4, 0xC4, 0x01, 0x00, 0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4,
         0x06, 0x11, 0xDC, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x00000E84UL,
     {
     0xF4, 0x84, 0x02, 0x00, 0x8A, 0xF4, 0xF0, 0x00, 0x9A, 0x04, 0x5A, 0xD0,
         0xF2, 0xF4, 0xE6, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000E94UL,
     {
     0x46, 0xF4, 0x10, 0x0E, 0x2D, 0x53, 0xF2, 0xF5, 0xEA, 0xFC, 0xE6, 0xF4,
         0x12, 0x00, 0x1B, 0x54}
   }
-  , 
+  ,
   {
     0x10, 0x00000EA4UL,
     {
     0xF2, 0xF9, 0x0C, 0xFE, 0xF2, 0xF8, 0x0E, 0xFE, 0xE6, 0xF6, 0x20, 0xFD,
         0xE6, 0xF7, 0x02, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000EB4UL,
     {
     0xF0, 0x46, 0x00, 0x48, 0xF0, 0x57, 0x10, 0x59, 0xF6, 0xF4, 0xF6, 0xFC,
         0xF6, 0xF5, 0xF8, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000EC4UL,
     {
     0xCA, 0x00, 0x2A, 0x28, 0xF6, 0xF4, 0x54, 0x11, 0xF6, 0xF5, 0x56, 0x11,
         0xE0, 0x08, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000ED4UL,
     {
     0xA0, 0x0A, 0xF6, 0xF4, 0x52, 0x11, 0xF2, 0xF4, 0x54, 0x11, 0xF2, 0xF5,
         0x56, 0x11, 0xF2, 0xF3}
   }
-  , 
+  ,
   {
     0x10, 0x00000EE4UL,
     {
     0xF8, 0xFC, 0xF2, 0xF2, 0xF6, 0xFC, 0xCA, 0x00, 0x62, 0x00, 0xF2, 0xF6,
         0x52, 0x11, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x00000EF4UL,
     {
     0xF8, 0xFC, 0xF2, 0xF4, 0xF6, 0xFC, 0x08, 0x46, 0x18, 0x50, 0xDC, 0x05,
         0xB8, 0x64, 0xE1, 0x1C}
   }
-  , 
+  ,
   {
     0x10, 0x00000F04UL,
     {
     0xF2, 0xF5, 0xF8, 0xFC, 0xF2, 0xF4, 0xF6, 0xFC, 0x08, 0x44, 0x18, 0x50,
         0xDC, 0x05, 0xB9, 0xC4}
   }
-  , 
+  ,
   {
     0x10, 0x00000F14UL,
     {
     0x24, 0x8F, 0xEA, 0xFC, 0xF2, 0xF5, 0xEA, 0xFC, 0xE6, 0xF4, 0x10, 0x0E,
         0xF2, 0x07, 0xEA, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000F24UL,
     {
     0x5B, 0x44, 0xF2, 0xF4, 0x0C, 0xFE, 0xF2, 0xF6, 0x0E, 0xFE, 0xF6, 0xF4,
         0xEA, 0xFC, 0x24, 0x8F}
   }
-  , 
+  ,
   {
     0x10, 0x00000F34UL,
     {
     0xE6, 0xFC, 0xC2, 0xF8, 0x31, 0x11, 0xCA, 0x00, 0x38, 0x23, 0x0D, 0x01,
         0xCF, 0x04, 0xDE, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x00000F44UL,
     {
     0xF2, 0xF5, 0x08, 0x11, 0xF2, 0xF4, 0x06, 0x11, 0xDC, 0x05, 0xF4, 0x84,
         0x03, 0x00, 0xF7, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x00000F54UL,
     {
     0x58, 0x11, 0x49, 0x80, 0xEA, 0x30, 0xC8, 0x0D, 0xF2, 0x8C, 0xFA, 0xFC,
         0xFC, 0x07, 0xFC, 0x06}
   }
-  , 
+  ,
   {
     0x0A, 0x00000F64UL,
     {
     0xFC, 0x87, 0xFC, 0x00, 0xFC, 0x08, 0xFC, 0x03, 0xFB, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x00000F6EUL,
     {
     0xC6, 0x03, 0x03, 0x00, 0xCC, 0x00, 0xF6, 0xF0, 0x20, 0xFC, 0xC6, 0x08,
         0x20, 0xFC, 0xCC, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000F7EUL,
     {
     0xEC, 0x00, 0xC6, 0x87, 0x10, 0x00, 0xEC, 0x06, 0xEC, 0x07, 0xF6, 0x8C,
         0xFA, 0xFC, 0xE6, 0x8C}
   }
-  , 
+  ,
   {
     0x10, 0x00000F8EUL,
     {
     0x6E, 0x04, 0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05,
         0xF4, 0x84, 0x03, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000F9EUL,
     {
     0xF7, 0xF8, 0x58, 0x11, 0xF3, 0xF8, 0x58, 0x11, 0x9A, 0xF4, 0x18, 0x00,
         0xF2, 0xF4, 0xE4, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00000FAEUL,
     {
     0x46, 0xF4, 0x10, 0x0E, 0x2D, 0x0A, 0xF2, 0xFA, 0x04, 0x11, 0xF2, 0xF9,
         0x02, 0x11, 0x06, 0xF9}
   }
-  , 
+  ,
   {
     0x10, 0x00000FBEUL,
     {
     0x10, 0x00, 0xE0, 0x18, 0xCA, 0x00, 0x48, 0x11, 0x0D, 0x01, 0xBF, 0x04,
         0xE1, 0x4C, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x00000FCEUL,
     {
     0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05, 0xE4, 0xC4, 0x01, 0x00,
         0xF3, 0xF8, 0x58, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00000FDEUL,
     {
     0x9A, 0xF4, 0x03, 0x10, 0xE0, 0x18, 0xCA, 0x00, 0xA4, 0x2A, 0xC2, 0xF4,
         0x58, 0x11, 0x66, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00000FEEUL,
     {
     0x2C, 0x00, 0xEA, 0x20, 0x1E, 0x11, 0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4,
         0x02, 0x11, 0xDC, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x00000FFEUL,
     {
     0xF4, 0x84, 0x02, 0x00, 0xF7, 0xF8, 0x59, 0x11, 0xF3, 0xF8, 0x59, 0x11,
         0x9A, 0xF4, 0x04, 0x70}
   }
-  , 
+  ,
   {
     0x10, 0x0000100EUL,
     {
     0x8A, 0x04, 0x02, 0xE0, 0xEF, 0x04, 0xDF, 0x04, 0xF3, 0xF8, 0x59, 0x11,
         0x9A, 0xF4, 0x02, 0x60}
   }
-  , 
+  ,
   {
     0x10, 0x0000101EUL,
     {
     0x9A, 0x05, 0x08, 0x00, 0xF3, 0xF8, 0x59, 0x11, 0x67, 0xF8, 0x40, 0x00,
         0xC0, 0x84, 0x3D, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x0000102EUL,
     {
     0x9A, 0x05, 0x03, 0x00, 0x3A, 0x05, 0x05, 0x00, 0xDF, 0x04, 0xF3, 0xF8,
         0x58, 0x11, 0x9A, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x0000103EUL,
     {
     0x13, 0x30, 0xDF, 0x04, 0xE1, 0x4C, 0x0D, 0x07, 0xF2, 0xF5, 0x04, 0x11,
         0xF2, 0xF4, 0x02, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x0000104EUL,
     {
     0xDC, 0x05, 0xE4, 0xC4, 0x01, 0x00, 0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4,
         0x02, 0x11, 0xDC, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x0000105EUL,
     {
     0xF4, 0x84, 0x02, 0x00, 0x8A, 0xF4, 0xF0, 0x00, 0x9A, 0x04, 0x5A, 0xD0,
         0xF2, 0xF4, 0xE4, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x0000106EUL,
     {
     0x46, 0xF4, 0x10, 0x0E, 0x2D, 0x53, 0xF2, 0xF5, 0xE8, 0xFC, 0xE6, 0xF4,
         0x12, 0x00, 0x1B, 0x54}
   }
-  , 
+  ,
   {
     0x10, 0x0000107EUL,
     {
     0xF2, 0xF9, 0x0C, 0xFE, 0xF2, 0xF8, 0x0E, 0xFE, 0xE6, 0xF6, 0x00, 0x00,
         0xE6, 0xF7, 0x02, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000108EUL,
     {
     0xF0, 0x46, 0x00, 0x48, 0xF0, 0x57, 0x10, 0x59, 0xF6, 0xF4, 0xF6, 0xFC,
         0xF6, 0xF5, 0xF8, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x0000109EUL,
     {
     0xCA, 0x00, 0x2A, 0x28, 0xF6, 0xF4, 0x54, 0x11, 0xF6, 0xF5, 0x56, 0x11,
         0xE0, 0x18, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000010AEUL,
     {
     0xA0, 0x0A, 0xF6, 0xF4, 0x52, 0x11, 0xF2, 0xF4, 0x54, 0x11, 0xF2, 0xF5,
         0x56, 0x11, 0xF2, 0xF3}
   }
-  , 
+  ,
   {
     0x10, 0x000010BEUL,
     {
     0xF8, 0xFC, 0xF2, 0xF2, 0xF6, 0xFC, 0xCA, 0x00, 0x62, 0x00, 0xF2, 0xF6,
         0x52, 0x11, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x000010CEUL,
     {
     0xF8, 0xFC, 0xF2, 0xF4, 0xF6, 0xFC, 0x08, 0x46, 0x18, 0x50, 0xDC, 0x05,
         0xB8, 0x64, 0xE1, 0x1C}
   }
-  , 
+  ,
   {
     0x10, 0x000010DEUL,
     {
     0xF2, 0xF5, 0xF8, 0xFC, 0xF2, 0xF4, 0xF6, 0xFC, 0x08, 0x44, 0x18, 0x50,
         0xDC, 0x05, 0xB9, 0xC4}
   }
-  , 
+  ,
   {
     0x10, 0x000010EEUL,
     {
     0x24, 0x8F, 0xE8, 0xFC, 0xF2, 0xF5, 0xE8, 0xFC, 0xE6, 0xF4, 0x10, 0x0E,
         0xF2, 0x07, 0xE8, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x000010FEUL,
     {
     0x5B, 0x44, 0xF2, 0xF4, 0x0C, 0xFE, 0xF2, 0xF6, 0x0E, 0xFE, 0xF6, 0xF4,
         0xE8, 0xFC, 0x24, 0x8F}
   }
-  , 
+  ,
   {
     0x10, 0x0000110EUL,
     {
     0xE4, 0xFC, 0xC2, 0xF8, 0x30, 0x11, 0xCA, 0x00, 0x38, 0x23, 0x0D, 0x01,
         0xBF, 0x04, 0xDE, 0x04}
   }
-  , 
+  ,
   {
     0x10, 0x0000111EUL,
     {
     0xF2, 0xF5, 0x04, 0x11, 0xF2, 0xF4, 0x02, 0x11, 0xDC, 0x05, 0xF4, 0x84,
         0x03, 0x00, 0xF7, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x0000112EUL,
     {
     0x58, 0x11, 0x49, 0x80, 0xEA, 0x30, 0xA2, 0x0F, 0xF2, 0x8C, 0xFA, 0xFC,
         0xFC, 0x07, 0xFC, 0x06}
   }
-  , 
+  ,
   {
     0x0A, 0x0000113EUL,
     {
     0xFC, 0x87, 0xFC, 0x00, 0xFC, 0x08, 0xFC, 0x03, 0xFB, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x00001148UL,
     {
     0xEC, 0xFD, 0xEC, 0xFE, 0xEC, 0xFF, 0xF0, 0xE9, 0xF0, 0xFA, 0x06, 0xF0,
         0xF6, 0xFF, 0xF0, 0x48}
   }
-  , 
+  ,
   {
     0x10, 0x00001158UL,
     {
     0x49, 0x80, 0xEA, 0x30, 0x20, 0x14, 0xF2, 0xF5, 0xEA, 0xFC, 0xE6, 0xF4,
         0x12, 0x00, 0x1B, 0x54}
   }
-  , 
+  ,
   {
     0x10, 0x00001168UL,
     {
     0xF2, 0xF9, 0x0C, 0xFE, 0xF2, 0xF8, 0x0E, 0xFE, 0xE6, 0xF6, 0x20, 0xFD,
         0xE6, 0xF7, 0x02, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001178UL,
     {
     0xF0, 0x46, 0x00, 0x48, 0xF0, 0x57, 0x10, 0x59, 0xF6, 0xF4, 0xFC, 0xFC,
         0xF6, 0xF5, 0xFE, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00001188UL,
     {
     0xDC, 0x0F, 0xA9, 0x8E, 0x8A, 0xF4, 0x02, 0x70, 0xEA, 0x00, 0xF6, 0x12,
         0xF0, 0xBF, 0xF0, 0xAE}
   }
-  , 
+  ,
   {
     0x10, 0x00001198UL,
     {
     0xF2, 0xF5, 0xFE, 0xFC, 0xF2, 0xF4, 0xFC, 0xFC, 0x08, 0x44, 0x18, 0x50,
         0x08, 0x41, 0x18, 0x50}
   }
-  , 
+  ,
   {
     0x10, 0x000011A8UL,
     {
     0xF0, 0x84, 0xF0, 0x95, 0xCA, 0x00, 0x80, 0x29, 0xF2, 0xF3, 0xFE, 0xFC,
         0xF2, 0xF2, 0xFC, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x000011B8UL,
     {
     0x08, 0x26, 0x18, 0x30, 0xCA, 0x00, 0x54, 0x00, 0xC4, 0x40, 0x02, 0x00,
         0xC4, 0x50, 0x04, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000011C8UL,
     {
     0xD4, 0x40, 0x04, 0x00, 0x66, 0xF4, 0xFF, 0xF8, 0xC4, 0x40, 0x04, 0x00,
         0xF2, 0xF5, 0xFE, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x000011D8UL,
     {
     0xF2, 0xF4, 0xFC, 0xFC, 0x08, 0x45, 0x18, 0x50, 0xDC, 0x05, 0xA9, 0x84,
         0xC0, 0x84, 0x7C, 0x64}
   }
-  , 
+  ,
   {
     0x10, 0x000011E8UL,
     {
     0x9A, 0xF4, 0x05, 0x00, 0xF4, 0x80, 0x05, 0x00, 0x79, 0x84, 0xE4, 0x80,
         0x05, 0x00, 0xD4, 0x40}
   }
-  , 
+  ,
   {
     0x10, 0x000011F8UL,
     {
     0x02, 0x00, 0xD4, 0x50, 0x04, 0x00, 0x62, 0xF4, 0x26, 0x11, 0x62, 0xF5,
         0x28, 0x11, 0x22, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00001208UL,
     {
     0xFE, 0x10, 0x32, 0xF5, 0x00, 0x11, 0x3D, 0x2E, 0xCA, 0x00, 0x2A, 0x28,
         0xF0, 0x64, 0xF0, 0x75}
   }
-  , 
+  ,
   {
     0x10, 0x00001218UL,
     {
     0xC4, 0x40, 0x06, 0x00, 0xC4, 0x50, 0x08, 0x00, 0xF2, 0xF3, 0xFE, 0xFC,
         0xF2, 0xF2, 0xFC, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00001228UL,
     {
     0xCA, 0x00, 0x62, 0x00, 0xE1, 0x0C, 0xF2, 0xF5, 0xFE, 0xFC, 0xF2, 0xF4,
         0xFC, 0xFC, 0x08, 0x44}
   }
-  , 
+  ,
   {
     0x10, 0x00001238UL,
     {
     0x18, 0x50, 0xDC, 0x05, 0xB9, 0xC4, 0x24, 0x8F, 0xEA, 0xFC, 0xF2, 0xF5,
         0xEA, 0xFC, 0xE6, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00001248UL,
     {
     0x10, 0x0E, 0xF2, 0x07, 0xEA, 0xFC, 0x5B, 0x44, 0xF2, 0xF4, 0x0C, 0xFE,
         0xF2, 0xF6, 0x0E, 0xFE}
   }
-  , 
+  ,
   {
     0x10, 0x00001258UL,
     {
     0xF6, 0xF4, 0xEA, 0xFC, 0x24, 0x8F, 0xE6, 0xFC, 0xC2, 0xF8, 0x31, 0x11,
         0xCA, 0x00, 0x38, 0x23}
   }
-  , 
+  ,
   {
     0x10, 0x00001268UL,
     {
     0xEA, 0x00, 0xC8, 0x16, 0xD4, 0x40, 0x02, 0x00, 0xD4, 0x50, 0x04, 0x00,
         0x62, 0xF4, 0x1E, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00001278UL,
     {
     0x62, 0xF5, 0x20, 0x11, 0x22, 0xF4, 0xF6, 0x10, 0x32, 0xF5, 0xF8, 0x10,
         0xEA, 0x30, 0xC8, 0x16}
   }
-  , 
+  ,
   {
     0x10, 0x00001288UL,
     {
     0xCA, 0x00, 0x2A, 0x28, 0xF0, 0x64, 0xF0, 0x75, 0xC4, 0x40, 0x06, 0x00,
         0xC4, 0x50, 0x08, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001298UL,
     {
     0xF2, 0xF3, 0xFE, 0xFC, 0xF2, 0xF2, 0xFC, 0xFC, 0xCA, 0x00, 0x62, 0x00,
         0xE1, 0x2C, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x000012A8UL,
     {
     0xFE, 0xFC, 0xF2, 0xF4, 0xFC, 0xFC, 0x08, 0x44, 0x18, 0x50, 0xDC, 0x05,
         0xB9, 0xC4, 0xF2, 0xF7}
   }
-  , 
+  ,
   {
     0x10, 0x000012B8UL,
     {
     0xFE, 0xFC, 0xF2, 0xF6, 0xFC, 0xFC, 0x08, 0x64, 0x18, 0x70, 0xDC, 0x17,
         0xA9, 0x86, 0xB9, 0x86}
   }
-  , 
+  ,
   {
     0x10, 0x000012C8UL,
     {
     0x24, 0x8F, 0xEA, 0xFC, 0xF2, 0xF5, 0xEA, 0xFC, 0xE6, 0xF4, 0x10, 0x0E,
         0xF2, 0x07, 0xEA, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x000012D8UL,
     {
     0x5B, 0x44, 0xF2, 0xF4, 0x0C, 0xFE, 0xF2, 0xF6, 0x0E, 0xFE, 0xF6, 0xF4,
         0xEA, 0xFC, 0x24, 0x8F}
   }
-  , 
+  ,
   {
     0x10, 0x000012E8UL,
     {
     0xE6, 0xFC, 0xC2, 0xF8, 0x31, 0x11, 0xCA, 0x00, 0x38, 0x23, 0xEA, 0x00,
         0xC8, 0x16, 0xF0, 0xBF}
   }
-  , 
+  ,
   {
     0x10, 0x000012F8UL,
     {
     0xF0, 0xAE, 0xF2, 0xF5, 0xFE, 0xFC, 0xF2, 0xF4, 0xFC, 0xFC, 0x08, 0x44,
         0x18, 0x50, 0x08, 0x41}
   }
-  , 
+  ,
   {
     0x10, 0x00001308UL,
     {
     0x18, 0x50, 0xF0, 0x84, 0xF0, 0x95, 0xCA, 0x00, 0x02, 0x2A, 0xF2, 0xF5,
         0xFE, 0xFC, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00001318UL,
     {
     0xFC, 0xFC, 0x08, 0x46, 0x18, 0x50, 0xDC, 0x05, 0xA8, 0x44, 0xB8, 0x40,
         0x66, 0xF4, 0xFF, 0xE0}
   }
-  , 
+  ,
   {
     0x10, 0x00001328UL,
     {
     0xB8, 0x40, 0xF2, 0xF5, 0xFE, 0xFC, 0xF2, 0xF4, 0xFC, 0xFC, 0x08, 0x45,
         0x18, 0x50, 0xDC, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x00001338UL,
     {
     0xA9, 0x84, 0xC0, 0x84, 0x7C, 0x64, 0x9A, 0xF4, 0x06, 0x00, 0xF4, 0x80,
         0x01, 0x00, 0x77, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x00001348UL,
     {
     0x10, 0x00, 0xE4, 0x80, 0x01, 0x00, 0xA8, 0xD0, 0xF0, 0x4D, 0x62, 0xF4,
         0x10, 0x11, 0x42, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00001358UL,
     {
     0x18, 0x11, 0x3D, 0x2E, 0xCA, 0x00, 0x2A, 0x28, 0xF0, 0x64, 0xF0, 0x75,
         0xC4, 0x40, 0x06, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001368UL,
     {
     0xC4, 0x50, 0x08, 0x00, 0xF2, 0xF3, 0xFE, 0xFC, 0xF2, 0xF2, 0xFC, 0xFC,
         0xCA, 0x00, 0x62, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001378UL,
     {
     0xE1, 0x0C, 0xF2, 0xF5, 0xFE, 0xFC, 0xF2, 0xF4, 0xFC, 0xFC, 0x08, 0x44,
         0x18, 0x50, 0xDC, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x00001388UL,
     {
     0xB9, 0xC4, 0x24, 0x8F, 0xEA, 0xFC, 0xF2, 0xF5, 0xEA, 0xFC, 0xE6, 0xF4,
         0x10, 0x0E, 0xF2, 0x07}
   }
-  , 
+  ,
   {
     0x10, 0x00001398UL,
     {
     0xEA, 0xFC, 0x5B, 0x44, 0xF2, 0xF4, 0x0C, 0xFE, 0xF2, 0xF6, 0x0E, 0xFE,
         0xF6, 0xF4, 0xEA, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x000013A8UL,
     {
     0x24, 0x8F, 0xE6, 0xFC, 0xC2, 0xF8, 0x31, 0x11, 0xCA, 0x00, 0x38, 0x23,
         0xEA, 0x00, 0xC8, 0x16}
   }
-  , 
+  ,
   {
     0x10, 0x000013B8UL,
     {
     0x62, 0xFD, 0x0C, 0x11, 0x42, 0xFD, 0x14, 0x11, 0xEA, 0x30, 0xC8, 0x16,
         0xCA, 0x00, 0x2A, 0x28}
   }
-  , 
+  ,
   {
     0x10, 0x000013C8UL,
     {
     0xF0, 0x64, 0xF0, 0x75, 0xC4, 0x40, 0x06, 0x00, 0xC4, 0x50, 0x08, 0x00,
         0xF2, 0xF3, 0xFE, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x000013D8UL,
     {
     0xF2, 0xF2, 0xFC, 0xFC, 0xCA, 0x00, 0x62, 0x00, 0xE1, 0x2C, 0xF2, 0xF5,
         0xFE, 0xFC, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x0E, 0x000013E8UL,
     {
     0xFC, 0xFC, 0x08, 0x44, 0x18, 0x50, 0xDC, 0x05, 0xB9, 0xC4, 0x24, 0x8F,
         0xEA, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x000013F6UL,
     {
     0xF2, 0xF5, 0xEA, 0xFC, 0xE6, 0xF4, 0x10, 0x0E, 0xF2, 0x07, 0xEA, 0xFC,
         0x5B, 0x44, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00001406UL,
     {
     0x0C, 0xFE, 0xF2, 0xF6, 0x0E, 0xFE, 0xF6, 0xF4, 0xEA, 0xFC, 0x24, 0x8F,
         0xE6, 0xFC, 0xC2, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x00001416UL,
     {
     0x31, 0x11, 0xCA, 0x00, 0x38, 0x23, 0xEA, 0x00, 0xC8, 0x16, 0xF2, 0xF5,
         0xE8, 0xFC, 0xE6, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00001426UL,
     {
     0x12, 0x00, 0x1B, 0x54, 0xF2, 0xF9, 0x0C, 0xFE, 0xF2, 0xF8, 0x0E, 0xFE,
         0xE6, 0xF6, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001436UL,
     {
     0xE6, 0xF7, 0x02, 0x00, 0xF0, 0x46, 0x00, 0x48, 0xF0, 0x57, 0x10, 0x59,
         0xF6, 0xF4, 0xFC, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00001446UL,
     {
     0xF6, 0xF5, 0xFE, 0xFC, 0xDC, 0x0F, 0xA9, 0x8E, 0x8A, 0xF4, 0x02, 0x70,
         0xEA, 0x00, 0xA6, 0x15}
   }
-  , 
+  ,
   {
     0x10, 0x00001456UL,
     {
     0xF0, 0xBF, 0xF0, 0xAE, 0xF2, 0xF5, 0xFE, 0xFC, 0xF2, 0xF4, 0xFC, 0xFC,
         0x08, 0x44, 0x18, 0x50}
   }
-  , 
+  ,
   {
     0x10, 0x00001466UL,
     {
     0x08, 0x41, 0x18, 0x50, 0xF0, 0x84, 0xF0, 0x95, 0xCA, 0x00, 0x80, 0x29,
         0xF2, 0xF3, 0xFE, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00001476UL,
     {
     0xF2, 0xF2, 0xFC, 0xFC, 0x08, 0x26, 0x18, 0x30, 0xCA, 0x00, 0x54, 0x00,
         0xC4, 0x40, 0x02, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001486UL,
     {
     0xC4, 0x50, 0x04, 0x00, 0xD4, 0x40, 0x04, 0x00, 0x66, 0xF4, 0xFF, 0xF8,
         0xC4, 0x40, 0x04, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001496UL,
     {
     0xF2, 0xF5, 0xFE, 0xFC, 0xF2, 0xF4, 0xFC, 0xFC, 0x08, 0x45, 0x18, 0x50,
         0xDC, 0x05, 0xA9, 0x84}
   }
-  , 
+  ,
   {
     0x10, 0x000014A6UL,
     {
     0xC0, 0x84, 0x7C, 0x64, 0x9A, 0xF4, 0x05, 0x00, 0xF4, 0x80, 0x05, 0x00,
         0x79, 0x84, 0xE4, 0x80}
   }
-  , 
+  ,
   {
     0x10, 0x000014B6UL,
     {
     0x05, 0x00, 0xD4, 0x40, 0x02, 0x00, 0xD4, 0x50, 0x04, 0x00, 0x62, 0xF4,
         0x22, 0x11, 0x62, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x000014C6UL,
     {
     0x24, 0x11, 0x22, 0xF4, 0xFA, 0x10, 0x32, 0xF5, 0xFC, 0x10, 0x3D, 0x2E,
         0xCA, 0x00, 0x2A, 0x28}
   }
-  , 
+  ,
   {
     0x10, 0x000014D6UL,
     {
     0xF0, 0x64, 0xF0, 0x75, 0xC4, 0x40, 0x06, 0x00, 0xC4, 0x50, 0x08, 0x00,
         0xF2, 0xF3, 0xFE, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x000014E6UL,
     {
     0xF2, 0xF2, 0xFC, 0xFC, 0xCA, 0x00, 0x62, 0x00, 0xE1, 0x0C, 0xF2, 0xF5,
         0xFE, 0xFC, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x000014F6UL,
     {
     0xFC, 0xFC, 0x08, 0x44, 0x18, 0x50, 0xDC, 0x05, 0xB9, 0xC4, 0x24, 0x8F,
         0xE8, 0xFC, 0xF2, 0xF5}
   }
-  , 
+  ,
   {
     0x10, 0x00001506UL,
     {
     0xE8, 0xFC, 0xE6, 0xF4, 0x10, 0x0E, 0xF2, 0x07, 0xE8, 0xFC, 0x5B, 0x44,
         0xF2, 0xF4, 0x0C, 0xFE}
   }
-  , 
+  ,
   {
     0x10, 0x00001516UL,
     {
     0xF2, 0xF6, 0x0E, 0xFE, 0xF6, 0xF4, 0xE8, 0xFC, 0x24, 0x8F, 0xE4, 0xFC,
         0xC2, 0xF8, 0x30, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00001526UL,
     {
     0xCA, 0x00, 0x38, 0x23, 0xEA, 0x00, 0xC8, 0x16, 0xD4, 0x40, 0x02, 0x00,
         0xD4, 0x50, 0x04, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001536UL,
     {
     0x62, 0xF4, 0x1A, 0x11, 0x62, 0xF5, 0x1C, 0x11, 0x22, 0xF4, 0xF2, 0x10,
         0x32, 0xF5, 0xF4, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x00001546UL,
     {
     0xEA, 0x30, 0xC8, 0x16, 0xCA, 0x00, 0x2A, 0x28, 0xF0, 0x64, 0xF0, 0x75,
         0xC4, 0x40, 0x06, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001556UL,
     {
     0xC4, 0x50, 0x08, 0x00, 0xF2, 0xF3, 0xFE, 0xFC, 0xF2, 0xF2, 0xFC, 0xFC,
         0xCA, 0x00, 0x62, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001566UL,
     {
     0xE1, 0x2C, 0xF2, 0xF5, 0xFE, 0xFC, 0xF2, 0xF4, 0xFC, 0xFC, 0x08, 0x44,
         0x18, 0x50, 0xDC, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x00001576UL,
     {
     0xB9, 0xC4, 0x24, 0x8F, 0xE8, 0xFC, 0xF2, 0xF5, 0xE8, 0xFC, 0xE6, 0xF4,
         0x10, 0x0E, 0xF2, 0x07}
   }
-  , 
+  ,
   {
     0x10, 0x00001586UL,
     {
     0xE8, 0xFC, 0x5B, 0x44, 0xF2, 0xF4, 0x0C, 0xFE, 0xF2, 0xF6, 0x0E, 0xFE,
         0xF6, 0xF4, 0xE8, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x00001596UL,
     {
     0x24, 0x8F, 0xE4, 0xFC, 0xC2, 0xF8, 0x30, 0x11, 0xCA, 0x00, 0x38, 0x23,
         0xEA, 0x00, 0xC8, 0x16}
   }
-  , 
+  ,
   {
     0x10, 0x000015A6UL,
     {
     0xF0, 0xBF, 0xF0, 0xAE, 0xF2, 0xF5, 0xFE, 0xFC, 0xF2, 0xF4, 0xFC, 0xFC,
         0x08, 0x44, 0x18, 0x50}
   }
-  , 
+  ,
   {
     0x10, 0x000015B6UL,
     {
     0x08, 0x41, 0x18, 0x50, 0xF0, 0x84, 0xF0, 0x95, 0xCA, 0x00, 0x02, 0x2A,
         0xF2, 0xF5, 0xFE, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x000015C6UL,
     {
     0xF2, 0xF4, 0xFC, 0xFC, 0x08, 0x46, 0x18, 0x50, 0xDC, 0x05, 0xA8, 0x44,
         0xB8, 0x40, 0x66, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x000015D6UL,
     {
     0xFF, 0xE0, 0xB8, 0x40, 0xF2, 0xF5, 0xFE, 0xFC, 0xF2, 0xF4, 0xFC, 0xFC,
         0x08, 0x45, 0x18, 0x50}
   }
-  , 
+  ,
   {
     0x10, 0x000015E6UL,
     {
     0xDC, 0x05, 0xA9, 0x84, 0xC0, 0x84, 0x7C, 0x64, 0x9A, 0xF4, 0x06, 0x00,
         0xF4, 0x80, 0x01, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000015F6UL,
     {
     0x77, 0xF8, 0x10, 0x00, 0xE4, 0x80, 0x01, 0x00, 0xA8, 0xD0, 0xF0, 0x4D,
         0x62, 0xF4, 0x0E, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00001606UL,
     {
     0x42, 0xF4, 0x16, 0x11, 0x3D, 0x2D, 0xCA, 0x00, 0x2A, 0x28, 0xF0, 0x64,
         0xF0, 0x75, 0xC4, 0x40}
   }
-  , 
+  ,
   {
     0x10, 0x00001616UL,
     {
     0x06, 0x00, 0xC4, 0x50, 0x08, 0x00, 0xF2, 0xF3, 0xFE, 0xFC, 0xF2, 0xF2,
         0xFC, 0xFC, 0xCA, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00001626UL,
     {
     0x62, 0x00, 0xE1, 0x0C, 0xF2, 0xF5, 0xFE, 0xFC, 0xF2, 0xF4, 0xFC, 0xFC,
         0x08, 0x44, 0x18, 0x50}
   }
-  , 
+  ,
   {
     0x10, 0x00001636UL,
     {
     0xDC, 0x05, 0xB9, 0xC4, 0x24, 0x8F, 0xE8, 0xFC, 0xF2, 0xF5, 0xE8, 0xFC,
         0xE6, 0xF4, 0x10, 0x0E}
   }
-  , 
+  ,
   {
     0x10, 0x00001646UL,
     {
     0xF2, 0x07, 0xE8, 0xFC, 0x5B, 0x44, 0xF2, 0xF4, 0x0C, 0xFE, 0xF2, 0xF6,
         0x0E, 0xFE, 0xF6, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00001656UL,
     {
     0xE8, 0xFC, 0x24, 0x8F, 0xE4, 0xFC, 0xC2, 0xF8, 0x30, 0x11, 0xCA, 0x00,
         0x38, 0x23, 0x0D, 0x31}
   }
-  , 
+  ,
   {
     0x10, 0x00001666UL,
     {
     0x62, 0xFD, 0x0A, 0x11, 0x42, 0xFD, 0x12, 0x11, 0x3D, 0x2C, 0xCA, 0x00,
         0x2A, 0x28, 0xF0, 0x64}
   }
-  , 
+  ,
   {
     0x10, 0x00001676UL,
     {
     0xF0, 0x75, 0xC4, 0x40, 0x06, 0x00, 0xC4, 0x50, 0x08, 0x00, 0xF2, 0xF3,
         0xFE, 0xFC, 0xF2, 0xF2}
   }
-  , 
+  ,
   {
     0x06, 0x00001686UL,
     {
     0xFC, 0xFC, 0xCA, 0x00, 0x62, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000168CUL,
     {
     0xE1, 0x2C, 0xF2, 0xF5, 0xFE, 0xFC, 0xF2, 0xF4, 0xFC, 0xFC, 0x08, 0x44,
         0x18, 0x50, 0xDC, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x0000169CUL,
     {
     0xB9, 0xC4, 0x24, 0x8F, 0xE8, 0xFC, 0xF2, 0xF5, 0xE8, 0xFC, 0xE6, 0xF4,
         0x10, 0x0E, 0xF2, 0x07}
   }
-  , 
+  ,
   {
     0x10, 0x000016ACUL,
     {
     0xE8, 0xFC, 0x5B, 0x44, 0xF2, 0xF4, 0x0C, 0xFE, 0xF2, 0xF6, 0x0E, 0xFE,
         0xF6, 0xF4, 0xE8, 0xFC}
   }
-  , 
+  ,
   {
     0x10, 0x000016BCUL,
     {
     0x24, 0x8F, 0xE4, 0xFC, 0xC2, 0xF8, 0x30, 0x11, 0xCA, 0x00, 0x38, 0x23,
         0x06, 0xF0, 0x0A, 0x00}
   }
-  , 
+  ,
   {
     0x08, 0x000016CCUL,
     {
     0xFC, 0xFF, 0xFC, 0xFE, 0xFC, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002BD0UL,
     {
     0x02, 0x40, 0x84, 0x10, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002BD6UL,
     {
     0x02, 0x40, 0x86, 0x10, 0x01, 0x00}
   }
-  , 
+  ,
   {
     0x08, 0x00002BDCUL,
     {
     0x04, 0x40, 0x88, 0x10, 0x00, 0x00, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002BE4UL,
     {
     0x02, 0x40, 0xCC, 0x10, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002BEAUL,
     {
     0x01, 0x40, 0xF0, 0x10, 0x00, 0x00}
   }
-  , 
+  ,
   {
     0x04, 0x00002618UL,
     {
     0xEC, 0xFD, 0xF0, 0xD8}
   }
-  , 
+  ,
   {
     0x10, 0x0000261CUL,
     {
     0xCA, 0x00, 0xA8, 0x27, 0xE6, 0xF4, 0xCE, 0x02, 0xF6, 0xF4, 0x86, 0x10,
         0xF0, 0x4D, 0xF7, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x0000262CUL,
     {
     0xCE, 0x10, 0xE0, 0x06, 0xE1, 0x0A, 0xE4, 0xA6, 0xCF, 0x10, 0x86, 0xF6,
         0x1F, 0x00, 0x8D, 0xFB}
   }
-  , 
+  ,
   {
     0x10, 0x0000263CUL,
     {
     0xE1, 0x1A, 0xC2, 0xF4, 0x5E, 0x11, 0xE4, 0xA4, 0xCF, 0x10, 0xF0, 0x4D,
         0x49, 0x81, 0x2D, 0x19}
   }
-  , 
+  ,
   {
     0x10, 0x0000264CUL,
     {
     0xF0, 0x4D, 0x49, 0x82, 0x2D, 0x16, 0xF0, 0x4D, 0x49, 0x84, 0x2D, 0x13,
         0xF0, 0x4D, 0x47, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x0000265CUL,
     {
     0x08, 0x00, 0x2D, 0x0F, 0xF0, 0x4D, 0x47, 0xF8, 0x10, 0x00, 0x2D, 0x0B,
         0xF0, 0x4D, 0x47, 0xF8}
   }
-  , 
+  ,
   {
     0x10, 0x0000266CUL,
     {
     0x20, 0x00, 0x2D, 0x07, 0xF0, 0x4D, 0xC0, 0x89, 0xE0, 0x28, 0xCA, 0x00,
         0x84, 0x00, 0xE0, 0x4D}
   }
-  , 
+  ,
   {
     0x10, 0x0000267CUL,
     {
     0xF0, 0x4D, 0xF0, 0x4D, 0xC0, 0x88, 0xCA, 0x00, 0xD6, 0x27, 0xCA, 0x00,
         0xC6, 0x27, 0xBF, 0x88}
   }
-  , 
+  ,
   {
     0x04, 0x0000268CUL,
     {
     0xFC, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x0A, 0x00002690UL,
     {
     0xD1, 0xA0, 0x6E, 0xCA, 0x6E, 0xC6, 0x6E, 0xC2, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x0A, 0x0000269AUL,
     {
     0xD1, 0xA0, 0x6F, 0xCA, 0x6F, 0xC6, 0x6F, 0xC2, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x0E, 0x000026A4UL,
     {
     0xBB, 0xF5, 0x24, 0x8F, 0x88, 0x10, 0x34, 0x8F, 0x8A, 0x10, 0xBB, 0xF5,
         0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000026B2UL,
     {
     0xF2, 0xF6, 0x86, 0x10, 0xF2, 0xF8, 0x88, 0x10, 0xF2, 0xF9, 0x8A, 0x10,
         0xF6, 0xF8, 0x0E, 0xFE}
   }
-  , 
+  ,
   {
     0x10, 0x000026C2UL,
     {
     0xF6, 0xF9, 0x0C, 0xFE, 0x7B, 0x66, 0xF2, 0xF7, 0x0E, 0xFE, 0x46, 0xF7,
         0x63, 0x00, 0xFD, 0x0C}
   }
-  , 
+  ,
   {
     0x10, 0x000026D2UL,
     {
     0xE6, 0xF6, 0x64, 0x00, 0xF6, 0xF8, 0x0E, 0xFE, 0xF6, 0xF9, 0x0C, 0xFE,
         0x7B, 0x66, 0xF6, 0x07}
   }
-  , 
+  ,
   {
     0x10, 0x000026E2UL,
     {
     0x86, 0x10, 0xF7, 0x8E, 0xF0, 0x10, 0x0D, 0x06, 0xF1, 0xAE, 0xE7, 0xF8,
         0x64, 0x00, 0x21, 0x8A}
   }
-  , 
+  ,
   {
     0x0C, 0x000026F2UL,
     {
     0xF7, 0xF8, 0xF0, 0x10, 0xF6, 0x8E, 0x88, 0x10, 0xF6, 0x8E, 0x8A, 0x10}
   }
-  , 
+  ,
   {
     0x02, 0x000026FEUL,
     {
     0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002700UL,
     {
     0xBE, 0x88, 0xCC, 0x00, 0xC2, 0xF5, 0xCE, 0x10, 0xF6, 0xF9, 0x0E, 0xFE,
         0x5B, 0x55, 0xF2, 0xF6}
   }
-  , 
+  ,
   {
     0x10, 0x00002710UL,
     {
     0x0E, 0xFE, 0x48, 0x60, 0x3D, 0x01, 0x08, 0x61, 0xF0, 0x56, 0x02, 0xF5,
         0xCC, 0x10, 0xF0, 0x48}
   }
-  , 
+  ,
   {
     0x10, 0x00002720UL,
     {
     0xC0, 0x86, 0xF0, 0x46, 0x5C, 0x14, 0xC4, 0x54, 0x8C, 0x10, 0xE1, 0x1A,
         0xE4, 0xA6, 0xCF, 0x10}
   }
-  , 
+  ,
   {
     0x02, 0x00002730UL,
     {
     0xBF, 0x88}
   }
-  , 
+  ,
   {
     0x02, 0x00002732UL,
     {
     0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x04, 0x00002734UL,
     {
     0xEC, 0xFD, 0xEC, 0xFE}
   }
-  , 
+  ,
   {
     0x10, 0x00002738UL,
     {
     0xF2, 0xF5, 0x84, 0x10, 0xC2, 0xF4, 0xCE, 0x10, 0x04, 0xF4, 0x84, 0x10,
         0xF0, 0x45, 0x52, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x00002748UL,
     {
     0x84, 0x10, 0xF0, 0x54, 0x62, 0xF5, 0x84, 0x10, 0xF0, 0x85, 0xCA, 0x00,
         0x7C, 0x00, 0xC0, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x00002758UL,
     {
     0xCA, 0x00, 0xD4, 0x16, 0x24, 0x8F, 0xCC, 0x10, 0xE0, 0x0D, 0xE6, 0xFE,
         0xCF, 0x10, 0x0D, 0x02}
   }
-  , 
+  ,
   {
     0x10, 0x00002768UL,
     {
     0x08, 0xD1, 0xF0, 0x4D, 0x99, 0x8E, 0x49, 0x81, 0x3D, 0xFB, 0xF0, 0x4D,
         0x43, 0xF8, 0x5E, 0x11}
   }
-  , 
+  ,
   {
     0x10, 0x00002778UL,
     {
     0x9D, 0x14, 0xF0, 0x4D, 0xC0, 0x84, 0x5C, 0x14, 0xD4, 0x44, 0x8C, 0x10,
         0x42, 0xF4, 0xCC, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x00002788UL,
     {
     0x3D, 0x09, 0xE1, 0x0A, 0xF0, 0x4D, 0xC0, 0x84, 0xE4, 0xA4, 0xCF, 0x10,
         0xF0, 0x4D, 0xC0, 0x88}
   }
-  , 
+  ,
   {
     0x0A, 0x00002798UL,
     {
     0xCA, 0x00, 0x38, 0x23, 0x08, 0xD1, 0xF0, 0x4D, 0x0D, 0xE2}
   }
-  , 
+  ,
   {
     0x06, 0x000027A2UL,
     {
     0xFC, 0xFE, 0xFC, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x02, 0x00000084UL,
     {
     0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000027A8UL,
     {
     0xE6, 0x8A, 0xAF, 0x04, 0xE6, 0x0D, 0x02, 0x20, 0xE6, 0x8B, 0xAF, 0x04,
         0xE6, 0x0E, 0x40, 0x20}
   }
-  , 
+  ,
   {
     0x0E, 0x000027B8UL,
     {
     0xE6, 0x8C, 0x5F, 0x04, 0xE6, 0x0F, 0x08, 0x10, 0xE6, 0x8D, 0xAF, 0x04,
         0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000027C6UL,
     {
     0xD1, 0xA0, 0xE6, 0xCA, 0x44, 0x00, 0xE6, 0xC6, 0x48, 0x00, 0xE6, 0xC2,
         0x4C, 0x00, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000027D6UL,
     {
     0xE6, 0xA2, 0x80, 0x00, 0xF0, 0x48, 0xC0, 0x85, 0xE6, 0xF4, 0xC4, 0x09,
         0x0B, 0x54, 0xF2, 0xF4}
   }
-  , 
+  ,
   {
     0x10, 0x000027E6UL,
     {
     0x0E, 0xFE, 0x28, 0x41, 0xF6, 0xF4, 0x10, 0xFD, 0xF2, 0x22, 0x10, 0xFD,
         0xE6, 0xB2, 0x58, 0x00}
   }
-  , 
+  ,
   {
     0x04, 0x000027F6UL,
     {
     0x6F, 0xA2, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000027FAUL,
     {
     0xE6, 0xA1, 0x80, 0x00, 0xE6, 0xA0, 0x27, 0x00, 0xF0, 0x48, 0xC0, 0x85,
         0xE6, 0xF4, 0xC4, 0x09}
   }
-  , 
+  ,
   {
     0x10, 0x0000280AUL,
     {
     0xF6, 0xF4, 0x0E, 0xFE, 0x4B, 0x55, 0xF2, 0xF4, 0x0E, 0xFE, 0x28, 0x41,
         0xF6, 0xF4, 0x40, 0xFE}
   }
-  , 
+  ,
   {
     0x10, 0x0000281AUL,
     {
     0xE6, 0xB1, 0x70, 0x00, 0xF6, 0x8E, 0x0C, 0xFD, 0xF6, 0x8E, 0x0E, 0xFD,
         0x6F, 0xA1, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x0000282AUL,
     {
     0xBE, 0x88, 0xCC, 0x00, 0xF2, 0xF6, 0x0C, 0xFD, 0xF2, 0xF7, 0x0E, 0xFD,
         0xBF, 0x88, 0xF0, 0x46}
   }
-  , 
+  ,
   {
     0x02, 0x0000283AUL,
     {
     0xF0, 0x57}
   }
-  , 
+  ,
   {
     0x02, 0x0000283CUL,
     {
     0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x0000283EUL,
     {
     0xF2, 0xF4, 0x0C, 0xFD, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002844UL,
     {
     0xBE, 0x88, 0xCC, 0x00, 0xF6, 0xF8, 0x0C, 0xFD, 0xF6, 0xF9, 0x0E, 0xFD,
         0xBF, 0x88, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002854UL,
     {
     0xC6, 0x03, 0x03, 0x00, 0xCC, 0x00, 0xF6, 0xF0, 0x40, 0xFC, 0xC6, 0x08,
         0x40, 0xFC, 0xCC, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002864UL,
     {
     0xEC, 0x00, 0xC6, 0x87, 0x10, 0x00, 0xEC, 0x06, 0xEC, 0x07, 0xCA, 0x00,
         0x08, 0x25, 0xFC, 0x07}
   }
-  , 
+  ,
   {
     0x0C, 0x00002874UL,
     {
     0xFC, 0x06, 0xFC, 0x87, 0xFC, 0x00, 0xFC, 0x08, 0xFC, 0x03, 0xFB, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x00002880UL,
     {
     0xC6, 0x03, 0x03, 0x00, 0xCC, 0x00, 0xF6, 0xF0, 0x60, 0xFC, 0xC6, 0x08,
         0x60, 0xFC, 0xCC, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002890UL,
     {
     0xEC, 0x00, 0xC6, 0x87, 0x10, 0x00, 0xEC, 0x06, 0xEC, 0x07, 0xCA, 0x00,
         0xE4, 0x24, 0xFC, 0x07}
   }
-  , 
+  ,
   {
     0x0C, 0x000028A0UL,
     {
     0xFC, 0x06, 0xFC, 0x87, 0xFC, 0x00, 0xFC, 0x08, 0xFC, 0x03, 0xFB, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x000028ACUL,
     {
     0xC6, 0x03, 0x03, 0x00, 0xCC, 0x00, 0xF6, 0xF0, 0x80, 0xFC, 0xC6, 0x08,
         0x80, 0xFC, 0xCC, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000028BCUL,
     {
     0xEC, 0x00, 0xC6, 0x87, 0x10, 0x00, 0xEC, 0x06, 0xEC, 0x07, 0xCA, 0x00,
         0xCE, 0x24, 0xFC, 0x07}
   }
-  , 
+  ,
   {
     0x0C, 0x000028CCUL,
     {
     0xFC, 0x06, 0xFC, 0x87, 0xFC, 0x00, 0xFC, 0x08, 0xFC, 0x03, 0xFB, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x000028D8UL,
     {
     0xC6, 0x03, 0x03, 0x00, 0xCC, 0x00, 0xF6, 0xF0, 0xA0, 0xFC, 0xC6, 0x08,
         0xA0, 0xFC, 0xCC, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x000028E8UL,
     {
     0xEC, 0x00, 0xC6, 0x87, 0x10, 0x00, 0xEC, 0x06, 0xEC, 0x07, 0xD1, 0x00,
         0x02, 0x22, 0x10, 0xFD}
   }
-  , 
+  ,
   {
     0x10, 0x000028F8UL,
     {
     0xCA, 0x00, 0x34, 0x27, 0xFC, 0x07, 0xFC, 0x06, 0xFC, 0x87, 0xFC, 0x00,
         0xFC, 0x08, 0xFC, 0x03}
   }
-  , 
+  ,
   {
     0x02, 0x00002908UL,
     {
     0xFB, 0x88}
   }
-  , 
+  ,
   {
     0x10, 0x0000290AUL,
     {
     0xC6, 0x03, 0x03, 0x00, 0x24, 0x8F, 0x0C, 0xFD, 0x34, 0x8F, 0x0E, 0xFD,
         0xFC, 0x03, 0xFB, 0x88}
   }
-  , 
+  ,
   {
     0x08, 0x0000007CUL,
     {
     0x2B, 0x88, 0xE0, 0xF4, 0x20, 0x48, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002BF2UL,
     {
     0xA5, 0x5A, 0xA5, 0xA5, 0x0A, 0x86, 0x3F, 0x2E, 0x1A, 0x86, 0x00, 0xD2,
         0x1A, 0x89, 0x00, 0xFB}
   }
-  , 
+  ,
   {
     0x10, 0x00002C02UL,
     {
     0x0A, 0x89, 0x6F, 0x00, 0xE6, 0x0A, 0x0C, 0xFA, 0xE6, 0x00, 0x04, 0x00,
         0xE6, 0x01, 0x05, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002C12UL,
     {
     0xE6, 0x02, 0x06, 0x00, 0xE6, 0x08, 0xC0, 0xFC, 0xB5, 0x4A, 0xB5, 0xB5,
         0xE6, 0xF0, 0x00, 0x10}
   }
-  , 
+  ,
   {
     0x10, 0x00002C22UL,
     {
     0xE6, 0xF9, 0x00, 0x00, 0xE6, 0xF8, 0x10, 0x2D, 0xF0, 0x18, 0x70, 0x19,
         0x2D, 0x29, 0xE0, 0x05}
   }
-  , 
+  ,
   {
     0x10, 0x00002C32UL,
     {
     0xDC, 0x09, 0x98, 0x28, 0x2D, 0x25, 0xF0, 0x32, 0xDC, 0x09, 0x98, 0x48,
         0xAA, 0xF2, 0x1B, 0xE0}
   }
-  , 
+  ,
   {
     0x10, 0x00002C42UL,
     {
     0xAA, 0xF2, 0x0E, 0xF0, 0xF0, 0x34, 0x7C, 0x33, 0x0E, 0xF3, 0x06, 0xF3,
         0x00, 0xFD, 0xE0, 0x15}
   }
-  , 
+  ,
   {
     0x10, 0x00002C52UL,
     {
     0x4C, 0x54, 0x91, 0x50, 0x68, 0x5B, 0xB8, 0x53, 0x08, 0x41, 0x28, 0x21,
         0x3D, 0xF3, 0x0D, 0xE7}
   }
-  , 
+  ,
   {
     0x10, 0x00002C62UL,
     {
     0xDC, 0x09, 0x98, 0x38, 0xDC, 0x44, 0xB9, 0xA3, 0x08, 0x31, 0x18, 0x40,
         0x76, 0xF3, 0x00, 0xC0}
   }
-  , 
+  ,
   {
     0x10, 0x00002C72UL,
     {
     0x28, 0x21, 0x7D, 0xF8, 0x0D, 0xDC, 0xB9, 0xA4, 0x08, 0x41, 0x28, 0x21,
         0x7D, 0xFC, 0x0D, 0xD7}
   }
-  , 
+  ,
   {
     0x10, 0x00002C82UL,
     {
     0xE6, 0xF9, 0x00, 0x00, 0xE6, 0xF8, 0x00, 0x2B, 0xE6, 0x03, 0x03, 0x00,
         0xDC, 0x09, 0xA8, 0x28}
   }
-  , 
+  ,
   {
     0x10, 0x00002C92UL,
     {
     0x2D, 0x3C, 0x08, 0x82, 0x18, 0x90, 0xAA, 0xF2, 0x29, 0xF0, 0xF0, 0x42,
         0x66, 0xF2, 0xFF, 0x3F}
   }
-  , 
+  ,
   {
     0x10, 0x00002CA2UL,
     {
     0x3D, 0x05, 0xE0, 0x04, 0xDC, 0x09, 0xA8, 0x28, 0x08, 0x82, 0x18, 0x90,
         0xDC, 0x09, 0xA8, 0x38}
   }
-  , 
+  ,
   {
     0x10, 0x00002CB2UL,
     {
     0x08, 0x82, 0x18, 0x90, 0x8A, 0xF4, 0x06, 0xE0, 0xF6, 0xF3, 0x06, 0xFE,
         0xDC, 0x09, 0xA8, 0x38}
   }
-  , 
+  ,
   {
     0x10, 0x00002CC2UL,
     {
     0x08, 0x82, 0x18, 0x90, 0xDC, 0x09, 0xA9, 0xA8, 0x08, 0x81, 0x18, 0x90,
         0xB9, 0xA3, 0x08, 0x31}
   }
-  , 
+  ,
   {
     0x10, 0x00002CD2UL,
     {
     0x8A, 0xF4, 0x06, 0xE0, 0x8A, 0xF3, 0x04, 0xE0, 0x06, 0x03, 0x01, 0x00,
         0x76, 0xF3, 0x00, 0xC0}
   }
-  , 
+  ,
   {
     0x10, 0x00002CE2UL,
     {
     0x28, 0x21, 0x3D, 0xF0, 0x9A, 0xF8, 0xD0, 0x00, 0x08, 0x81, 0x0D, 0xCE,
         0xC0, 0x43, 0x5C, 0x13}
   }
-  , 
+  ,
   {
     0x10, 0x00002CF2UL,
     {
     0x76, 0xF3, 0x00, 0xFD, 0xE0, 0x14, 0xF1, 0xA5, 0x4C, 0x45, 0x8A, 0xF2,
         0x03, 0x70, 0x91, 0x40}
   }
-  , 
+  ,
   {
     0x0E, 0x00002D02UL,
     {
     0x68, 0x4B, 0x0D, 0x01, 0x78, 0x4B, 0xB8, 0x43, 0x0D, 0xBF, 0xFA, 0x00,
         0x44, 0x1D}
   }
-  , 
+  ,
   {
     0x0E, 0x00000054UL,
     {
     0xDC, 0x03, 0xA8, 0x42, 0x08, 0x22, 0x18, 0x30, 0xDC, 0x03, 0xA8, 0x52,
         0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x0E, 0x00000062UL,
     {
     0xDC, 0x03, 0xB8, 0x42, 0x08, 0x22, 0x18, 0x30, 0xDC, 0x03, 0xB8, 0x52,
         0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000094UL,
     {
     0xF0, 0x28, 0xF0, 0x39, 0x0D, 0x05, 0x28, 0xB1, 0xF0, 0x6A, 0xDC, 0x49,
         0xB9, 0xC8, 0x08, 0x81}
   }
-  , 
+  ,
   {
     0x0A, 0x000000A4UL,
     {
     0x48, 0xB0, 0x3D, 0xF9, 0xF0, 0x42, 0xF0, 0x53, 0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000036UL,
     {
     0xEC, 0xFD, 0xF0, 0xD8, 0x0D, 0x04, 0x99, 0x8D, 0xD0, 0x88, 0xCA, 0x00,
         0x04, 0x00, 0xA9, 0x8D}
   }
-  , 
+  ,
   {
     0x0E, 0x00000046UL,
     {
     0x3D, 0xFA, 0xE0, 0xA8, 0xCA, 0x00, 0x04, 0x00, 0xE0, 0x04, 0xFC, 0xFD,
         0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x02, 0x00002BF0UL,
     {
     0x00, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000004UL,
     {
     0x46, 0xF8, 0x0A, 0x00, 0x3D, 0x03, 0xE0, 0xD8, 0xBB, 0x01, 0xE0, 0xA8,
         0x9A, 0xB7, 0x0A, 0x70}
   }
-  , 
+  ,
   {
     0x10, 0x00000014UL,
     {
     0x46, 0x59, 0x13, 0x00, 0x3D, 0x07, 0x7E, 0xB7, 0x9A, 0xB7, 0xFE, 0x70,
         0x46, 0x59, 0x11, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00000024UL,
     {
     0x3D, 0xFA, 0x7E, 0xB7, 0x9A, 0xB6, 0xFE, 0x70, 0x7E, 0xB6, 0xF6, 0xF8,
         0xB0, 0xFE, 0xF0, 0x48}
   }
-  , 
+  ,
   {
     0x02, 0x00000034UL,
     {
     0xCB, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002D10UL,
     {
     0x82, 0x80, 0x04, 0x00, 0x00, 0xD0}
   }
-  , 
+  ,
   {
     0x04, 0x00002D16UL,
     {
     0x03, 0x40, 0x12, 0xFD}
   }
-  , 
+  ,
   {
     0x04, 0x00002D1AUL,
     {
     0x01, 0x00, 0x40, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002D1EUL,
     {
     0x04, 0x80, 0x04, 0x00, 0x5A, 0xD1}
   }
-  , 
+  ,
   {
     0x04, 0x00002D24UL,
     {
     0x07, 0x40, 0x00, 0xFD}
   }
-  , 
+  ,
   {
     0x04, 0x00002D28UL,
     {
     0x0A, 0x00, 0x41, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002D2CUL,
     {
     0x1F, 0x80, 0x04, 0x00, 0x32, 0xD1}
   }
-  , 
+  ,
   {
     0x06, 0x00002D32UL,
     {
     0x3F, 0x80, 0x04, 0x00, 0xF2, 0xD0}
   }
-  , 
+  ,
   {
     0x10, 0x00002D38UL,
     {
     0xFF, 0xBF, 0x08, 0x00, 0x00, 0xC0, 0xFF, 0xBF, 0x09, 0x00, 0x00, 0xC0,
         0xFF, 0xBF, 0x0A, 0x00}
   }
-  , 
+  ,
   {
     0x10, 0x00002D48UL,
     {
     0x00, 0xC0, 0xFF, 0xBF, 0x0B, 0x00, 0x00, 0xC0, 0xFF, 0xBF, 0x0C, 0x00,
         0x00, 0xC0, 0xFF, 0xBF}
   }
-  , 
+  ,
   {
     0x10, 0x00002D58UL,
     {
     0x0D, 0x00, 0x00, 0xC0, 0xFF, 0xBF, 0x0E, 0x00, 0x00, 0xC0, 0x3F, 0xBA,
         0x0F, 0x00, 0x00, 0xC0}
   }
-  , 
+  ,
   {
     0x04, 0x00002D68UL,
     {
     0x14, 0x40, 0xE0, 0xFC}
   }
-  , 
+  ,
   {
     0x04, 0x00002D6CUL,
     {
     0x02, 0x00, 0x4B, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002D70UL,
     {
     0x07, 0x80, 0x04, 0x00, 0x52, 0xD1}
   }
-  , 
+  ,
   {
     0x04, 0x00002D76UL,
     {
     0x09, 0x40, 0xF6, 0xFC}
   }
-  , 
+  ,
   {
     0x04, 0x00002D7AUL,
     {
     0x05, 0x00, 0x4D, 0x00}
   }
-  , 
+  ,
   {
     0x06, 0x00002D7EUL,
     {
     0x6C, 0x80, 0x04, 0x00, 0x84, 0xD0}
   }
-  , 
+  ,
   {
     0x04, 0x00002D84UL,
     {
     0x05, 0x40, 0x0C, 0xFD}
   }
-  , 
+  ,
   {
     0x02, 0x00002D88UL,
     {
     0x00, 0x00}
   }
-  , 
+  ,
   {
     0x04, 0x00000000UL,
     {
     0xFA, 0x00, 0xF2, 0x2B}
   }
-  , 
+  ,
   {
     0x04, 0x00000070UL,
     {
     0xFA, 0x00, 0x94, 0x0D}
   }
-  , 
+  ,
   {
     0x04, 0x00000074UL,
     {
     0xFA, 0x00, 0x6E, 0x0F}
   }
-  , 
+  ,
   {
     0x04, 0x00000078UL,
     {
     0xFA, 0x00, 0xE8, 0x21}
   }
-  , 
+  ,
   {
     0x04, 0x0000008CUL,
     {
     0xFA, 0x00, 0x0A, 0x29}
   }
-  , 
+  ,
   {
     0x04, 0x00000090UL,
     {
     0xFA, 0x00, 0xD8, 0x28}
   }
-  , 
+  ,
   {
     0x04, 0x00000110UL,
     {
     0xFA, 0x00, 0x54, 0x28}
   }
-  , 
+  ,
   {
     0x04, 0x00000114UL,
     {
     0xFA, 0x00, 0x80, 0x28}
   }
-  , 
+  ,
   {
     0x04, 0x00000118UL,
     {
     0xFA, 0x00, 0xAC, 0x28}
   }
-  , 
+  ,
   {
   0, 0,}
 

diff --git a/lincan/src/kv_pcican.c b/lincan/src/kv_pcican.c
index 30ac37731d6848ca74066a76b460b41f50d1f8be..cb0d4b506e4fb3b2c133a8361700ff6978403166 100644 (file)
--- a/lincan/src/kv_pcican.c
+++ b/lincan/src/kv_pcican.c
@@ -63,13 +63,13 @@
 
 /*
 
-You need to know the following: 
-" RX1 is connected to ground. 
-" TX1 is not connected. 
-" CLKO is not connected. 
-" Setting the OCR register to 0xDA is a good idea. 
-  This means  normal output mode , push-pull and the correct polarity. 
-" In the CDR register, you should set CBP to 1. 
+You need to know the following:
+" RX1 is connected to ground.
+" TX1 is not connected.
+" CLKO is not connected.
+" Setting the OCR register to 0xDA is a good idea.
+  This means  normal output mode , push-pull and the correct polarity.
+" In the CDR register, you should set CBP to 1.
   You will probably also want to set the clock divider value to 0 (meaning divide-by-2),
   the Pelican bit, and the clock-off bit (you have no need for CLKOUT anyway.)
 
@@ -126,7 +126,7 @@ int kv_pcican_request_io(struct candevice_t *candev)
     error_io:
        pci_release_region(candev->sysdevptr.pcidev, 0);
     #endif /*(LINUX_VERSION_CODE > KERNEL_VERSION(2,4,21))*/
-       
+
        return -ENODEV;
 }
 
@@ -148,7 +148,7 @@ int kv_pcican_release_io(struct candevice_t *candev)
 
 void kv_pcican_write_register(unsigned data, can_ioptr_t address)
 {
-       can_outb(data,address); 
+       can_outb(data,address);
 }
 
 unsigned kv_pcican_read_register(can_ioptr_t address)
@@ -193,15 +193,15 @@ int kv_pcican_reset(struct candevice_t *candev)
                kv_pcican_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
 
                kv_pcican_write_register(0, chip->chip_base_addr+SJAIER);
-               
+
                kv_pcican_read_register(chip->chip_base_addr+SJAIR);
        }
-       
+
 
        kv_pcican_connect_irq(candev);
 
        return 0;
-}      
+}
 
 int kv_pcican_init_hw_data(struct candevice_t *candev)
 {
@@ -211,14 +211,14 @@ int kv_pcican_init_hw_data(struct candevice_t *candev)
        pcidev = can_pci_get_next_untaken_device(KV_PCICAN_PCICAN_VENDOR, KV_PCICAN_PCICAN_ID);
        if(pcidev == NULL)
                return -ENODEV;
-       
+
        if (pci_enable_device (pcidev)){
                printk(KERN_CRIT "Setup of PCICAN failed\n");
                can_pci_dev_put(pcidev);
                return -EIO;
        }
        candev->sysdevptr.pcidev=pcidev;
-       
+
        for(i=0;i<3;i++){
                if(!(pci_resource_flags(pcidev,i)&IORESOURCE_IO)){
                        printk(KERN_CRIT "PCICAN region %d is not IO\n",i);
@@ -229,7 +229,7 @@ int kv_pcican_init_hw_data(struct candevice_t *candev)
        candev->dev_base_addr=pci_resource_start(pcidev,0); /*S5920*/
        candev->io_addr=pci_resource_start(pcidev,1); /*IO window for SJA1000 chips*/
        candev->res_addr=pci_resource_start(pcidev,2); /*XILINX board wide address*/
-       
+
        /*candev->flags |= CANDEV_PROGRAMMABLE_IRQ;*/
 
        if (!strcmp(candev->hwname,"pcican-s")) {
@@ -262,7 +262,7 @@ int kv_pcican_init_chip_data(struct candevice_t *candev, int chipnr)
 
        if(candev->sysdevptr.pcidev==NULL)
                return -ENODEV;
-       
+
        candev->chip[chipnr]->chip_irq=candev->sysdevptr.pcidev->irq;
 
        sja1000p_fill_chipspecops(candev->chip[chipnr]);
@@ -278,7 +278,7 @@ int kv_pcican_init_chip_data(struct candevice_t *candev, int chipnr)
        candev->chip[chipnr]->flags |= CHIP_IRQ_PCI;
 
        return 0;
-}      
+}
 
 int kv_pcican_init_obj_data(struct canchip_t *chip, int objnr)
 {

diff --git a/lincan/src/m437.c b/lincan/src/m437.c
index 2786106359401394e5df8260e97b679cc78f5e46..55f1d9981fabbed35190e99d9451cfebc5e45c4e 100644 (file)
--- a/lincan/src/m437.c
+++ b/lincan/src/m437.c
@@ -36,7 +36,7 @@
 
 /*
  * This driver has been designed to support "Memory (MEM)" mode.
- * For example: Memory, MEM:0xD0000 => io=0xD0000. 
+ * For example: Memory, MEM:0xD0000 => io=0xD0000.
  * Configure the card with m437set.com provided by seco before loading driver.
  * This software is released under the GPL-License.
  */
@@ -140,24 +140,24 @@ int m437_release_io(struct candevice_t *candev)
         */
 #if 0 /* Object reset method */
        unsigned i;
-       
+
         /* disable IRQ generation */
         m437_write_register(iCTL_CCE, candev->dev_base_addr+iCTL);
 
        /* clear all message objects */
        for (i=1; i<=15; i++) {
                m437_write_register(
-                               INTPD_RES | 
-                               RXIE_RES | 
-                               TXIE_RES | 
-                               MVAL_RES, 
+                               INTPD_RES |
+                               RXIE_RES |
+                               TXIE_RES |
+                               MVAL_RES,
                                candev->dev_base_addr+i*0x10+iMSGCTL0);
                m437_write_register(
-                               NEWD_RES | 
-                               MLST_RES | 
-                               CPUU_RES | 
-                               TXRQ_RES | 
-                               RMPD_RES, 
+                               NEWD_RES |
+                               MLST_RES |
+                               CPUU_RES |
+                               TXRQ_RES |
+                               RMPD_RES,
                                candev->dev_base_addr+i*0x10+iMSGCTL1);
        }
 

diff --git a/lincan/src/mpc5200.c b/lincan/src/mpc5200.c
index 4f67d2494f1be7578ee9130415950b65f042bbab..ae0a4650ffe56f11801712eb0e861609e238d120 100644 (file)
--- a/lincan/src/mpc5200.c
+++ b/lincan/src/mpc5200.c
@@ -61,7 +61,7 @@ int mpc5200_request_io(struct candevice_t *candev)
        /* Select device by chipnr:
         *  first dev is @ 900
         *  second dev is @ 980
-        * 
+        *
         * There are only two devices on MPC5200 */
 
        /* initialize internal address storage */
@@ -80,7 +80,7 @@ int mpc5200_request_io(struct candevice_t *candev)
                        continue;
                }
 
-               
+
                if (mpc5200_init_device_node(candev->chip[chipnr], dn))
                        return -ENODEV;
 
@@ -108,13 +108,13 @@ int mpc5200_release_io(struct candevice_t *candev)
                iounmap((void*)chips_addr[i]);
 
        kfree(chips_addr);
-       
+
        return 0;
 }
 
 int mpc5200_reset(struct candevice_t *candev)
 {
-       int i; 
+       int i;
        DEBUGMSG("Resetting MSCAN chips ...\n");
 
        for (i = 0; i < candev->nr_all_chips; i++)
@@ -127,7 +127,7 @@ int mpc5200_reset(struct candevice_t *candev)
        return 0;
 }
 
-int mpc5200_init_hw_data(struct candevice_t *candev) 
+int mpc5200_init_hw_data(struct candevice_t *candev)
 {
        /* candev->res_addr = RESET_ADDR; */
        candev->nr_82527_chips = NR_82527;
@@ -176,7 +176,7 @@ int mpc5200_init_obj_data(struct canchip_t *chip, int objnr)
 
 int mpc5200_program_irq(struct candevice_t *candev)
 {
-       /* we  don't use programmable interrupt on MPC5200 */ 
+       /* we  don't use programmable interrupt on MPC5200 */
        return 0;
 }
 
@@ -238,6 +238,6 @@ int mpc5200_init_device_node(struct canchip_t * chip, struct device_node * devno
        }
 
        DEBUGMSG("Bound to io-addr: 0x%08x IRQ: %d\n", (unsigned int)chip->chip_base_addr, chip->chip_irq);
-       
+
        return 0;
 }

diff --git a/lincan/src/mscan.c b/lincan/src/mscan.c
index 74c086af8405cb2dbd2e1f8f6046b6342cb34070..5b65df93b6b8ac15633e75acc442ea70d4265c99 100644 (file)
--- a/lincan/src/mscan.c
+++ b/lincan/src/mscan.c
@@ -83,31 +83,31 @@ static int mscan_abort_msg(struct canchip_t * chip, reg_t buffer_mask);
                        mscan_get_flags(chip, 0xff, MSCAN_CTL1),
                        mscan_get_flags(chip, 0xff, MSCAN_BTR0),
                        mscan_get_flags(chip, 0xff, MSCAN_BTR1));
-       
+
                CANMSG("RFLG 0x%02x\tRIER 0x%02x\tTFLG 0x%02x\tTIER 0x%02x\n",
                        mscan_get_flags(chip, 0xff, MSCAN_RFLG),
                        mscan_get_flags(chip, 0xff, MSCAN_RIER),
                        mscan_get_flags(chip, 0xff, MSCAN_TFLG),
                        mscan_get_flags(chip, 0xff, MSCAN_TIER));
-       
+
                CANMSG("TARQ 0x%02x\tTAAK 0x%02x\tTBSEL 0x%02x\tIDAC 0x%02x\n",
                        mscan_get_flags(chip, 0xff, MSCAN_TARQ),
                        mscan_get_flags(chip, 0xff, MSCAN_TAAK),
                        mscan_get_flags(chip, 0xff, MSCAN_TBSEL),
                        mscan_get_flags(chip, 0xff, MSCAN_IDAC));
-       
+
                CANMSG("RXERR 0x%02x\tTXERR 0x%02x\n",
                        mscan_get_flags(chip, 0xff, MSCAN_RXERR),
                        mscan_get_flags(chip, 0xff, MSCAN_TXERR));
-       
+
        }
-       
+
        static void dump_buff(struct canchip_t * chip, unsigned offset_addr)
        {
                volatile struct mscan_msg_buffer * buff = (struct mscan_msg_buffer *)(chip->chip_base_addr + offset_addr);
-       
+
                CANMSG("MSCAN buffer dump\n");
-               
+
                /* structural access */
                CANMSG("Data0 0x%02x Data1 0x%02x Data2 0x%02x Data3 0x%02x Data4 0x%02x Data5 0x%02x Data6 0x%02x Data7 0x%02x\n",
                        buff->data_0, buff->data_1, buff->data_2, buff->data_3, buff->data_4, buff->data_5, buff->data_6, buff->data_7);
@@ -115,7 +115,7 @@ static int mscan_abort_msg(struct canchip_t * chip, reg_t buffer_mask);
                        buff->data_len, buff->local_prio);
                CANMSG("IDR0 0x%02x\tIDR1 0x%02x\tIDR2 0x%02x\tIDR3 0x%02x\n",
                        buff->id_0, buff->id_1, buff->id_2, buff->id_3);
-       
+
        }
 
        static void dump_filter(struct canchip_t * chip)
@@ -140,7 +140,7 @@ static int mscan_abort_msg(struct canchip_t * chip, reg_t buffer_mask);
 
 
 /* macro for standardized CAN Bus Status change report */
-#define MSCAN_STAT_CHANGE(msg,idx) CANMSG("MSCAN chip %d %s\n", idx, msg) 
+#define MSCAN_STAT_CHANGE(msg,idx) CANMSG("MSCAN chip %d %s\n", idx, msg)
 
 /* Enable folowing IRQs
  * MSCAN_TIER_TXE - Transmit Empty Interrupt - Set and Cleared during TX proccess not during init
@@ -150,7 +150,7 @@ static int mscan_abort_msg(struct canchip_t * chip, reg_t buffer_mask);
  * MSCAN_RIER_OVRIE - Overrun
  * MSCAN_RIER_CSCIE - CAN Status Change
  */
-uint16_t mscan_IRQs = MSCAN_RIER_RXFIE | 
+uint16_t mscan_IRQs = MSCAN_RIER_RXFIE |
                MSCAN_RIER_RSTATE | MSCAN_RIER_TSTATE |
                MSCAN_RIER_OVRIE | MSCAN_RIER_CSCIE;    /* TX interrupt flag is held shifted */
 /* 1 - enable interrupt, 0 - interrupt is masked */
@@ -174,7 +174,7 @@ int mscan_chip_config(struct canchip_t *chip)
        int err;
 
        DEBUGMSG("Configuring chip...\n");
-       
+
        if ((err = mscan_enable_configuration(chip)))
                return err;
 
@@ -212,7 +212,7 @@ int mscan_enable_configuration(struct canchip_t *chip)
 
        /* Sleep mode - disable CAN activity after completing current operation */
        /* if controler not synced to bus, skip sleep mode */
-       if (!mscan_sleep_mode_active(chip) && 
+       if (!mscan_sleep_mode_active(chip) &&
                mscan_get_flags(chip, MSCAN_CTL0_SYNCH, MSCAN_CTL0))
                if (mscan_enter_sleep_mode(chip))
                {
@@ -220,7 +220,7 @@ int mscan_enable_configuration(struct canchip_t *chip)
                        DUMPREGS(chip);
                        DEBUGMSG("Forcig INIT\n");
                }
-               
+
 
        /* now we can enter Init mode */
        if(mscan_enter_init_mode(chip))
@@ -377,7 +377,7 @@ int mscan_baud_rate(struct canchip_t *chip, int bitrate, int clock, int sjw, int
        btr0 = (best_brp & MSCAN_BTR0_BRP) | ((sjw << 6) & MSCAN_BTR0_SJW);
        btr1 = (tseg1 & MSCAN_BTR1_TSEG1) | ((tseg2 << 4) & MSCAN_BTR1_TSEG2);
 
-       mscan_set_btregs(chip, btr0, btr1);     
+       mscan_set_btregs(chip, btr0, btr1);
 
        mscan_disable_configuration(chip);
 
@@ -389,17 +389,17 @@ int mscan_set_btregs(struct canchip_t *chip, unsigned short bcr0, unsigned short
 {
 /*     DEBUGMSG("Seting BCR0 and BCR1.\n"); */
        reg_t btr0, btr1;
-       
+
        btr0 = (reg_t)bcr0;
        btr1 = (reg_t)bcr1;
 
        btr1 &= ~MSCAN_BTR1_SAMP;       /* use one-point sample, not three smaples per bit */
 
        DEBUGMSG("BTR0 0x%02x  BTR1 0x%02x\n", btr0, btr1);
-       
+
        can_write_reg(chip, btr0, MSCAN_BTR0);
        can_write_reg(chip, btr1, MSCAN_BTR1);
-       
+
 /*     DEBUGMSG("BCR0 and BCR1 successfully set.\n"); */
        return 0;
 }
@@ -447,11 +447,11 @@ int mscan_attach_to_chip(struct canchip_t *chip)
 
        /* Transmitt Abort Request Register (TARQ) is clean after INIT mode - no need to clear it explicitly */
        /* Control Register 0 (CTL0) is clean after INIT too (excepts fro WUPE, SLRQ and INITRQ) */
-       
-       /* initialize chip by entering Sleep & Init mode */     
+
+       /* initialize chip by entering Sleep & Init mode */
        if (mscan_enable_configuration(chip))
                return -ENODEV;
-       
+
        /* reset Control Register 1 (CTL1) */
        ctl1 =  MSCAN_CTL1_CANE |
                (MPC5200_CLKSRC ? MSCAN_CTL1_CLKSRC : 0x00) ;
@@ -460,7 +460,7 @@ int mscan_attach_to_chip(struct canchip_t *chip)
                /* MSCAN_CTL1_WUPM |            WakeUp mode not used */
                /* MSCAN_CTL1_SLPAK |           ReadOnly */
                /* MSCAN_CTL1_INITAK |          ReadOnly */
-       
+
        can_write_reg(chip, ctl1, MSCAN_CTL1);
 
 
@@ -490,7 +490,7 @@ int mscan_release_chip(struct canchip_t *chip)
 {
        /* IRQ unmapped in lincan driver core */
        can_disable_irq(chip->chip_irq);
-       
+
        mscan_clear_objects(chip);      /* Cannot be called in INIT mode */
 
 
@@ -498,7 +498,7 @@ int mscan_release_chip(struct canchip_t *chip)
 
        /* disable chip */
        mscan_clear_flags(chip, MSCAN_CTL1_CANE, MSCAN_CTL1);
-       
+
        DEBUGMSG("Chip released [%02d]\n", chip->chip_idx);
        return 0;
 }
@@ -514,7 +514,7 @@ int mscan_standard_mask(struct canchip_t *chip, unsigned short code, unsigned sh
 
        reg_t idr0, idr1, mr0, mr1;     /* ID register 0,1, Mask register 0, 1 */
 
-       if (code & 0x1ffff800)  
+       if (code & 0x1ffff800)
            return mscan_extended_mask(chip, code, mask);
 
 
@@ -553,7 +553,7 @@ int mscan_extended_mask(struct canchip_t *chip, unsigned long code, unsigned lon
 {
        /* code - contains 11bit ID and as LSB the RTR flag */
        /* code - contains 11bit mask and RTR mask as LSB */
-       
+
        reg_t idr0, idr1, idr2, idr3;   /* ID registers 0,1,2,3 */
        reg_t mr0, mr1, mr2, mr3;       /* Mask registers 0,1,2,3 */
 
@@ -561,9 +561,9 @@ int mscan_extended_mask(struct canchip_t *chip, unsigned long code, unsigned lon
        /* we use two 32-bit acceptance filters */
        mscan_clear_flags(chip, MSCAN_IDAC_IDAM, MSCAN_IDAC);
 
-       
+
        idr0 = (reg_t)((code & 0x7fa00000) >> 22);      /* EXT_ID {29:21} */
-       
+
        idr1 = (reg_t)((code & 0x00380000) >> 14);      /* EXT_ID {20:18} */
        idr1|= 0x18;                                    /* SRR and IDE */
        idr1|= (reg_t)((code & 0x00070000) >> 16);      /* EXT_ID {17:15} */
@@ -573,7 +573,7 @@ int mscan_extended_mask(struct canchip_t *chip, unsigned long code, unsigned lon
 
 
        mr0 = (reg_t)((mask & 0x7fa00000) >> 22);       /* EXT_ID {29:21} */
-       
+
        mr1 = (reg_t)((mask & 0x00380000) >> 14);       /* EXT_ID {20:18} */
        /* SRR=0 and IDE=0 - do not ignore */
        mr1|= (reg_t)((mask & 0x00070000) >> 16);       /* EXT_ID {17:15} */
@@ -606,7 +606,7 @@ int mscan_extended_mask(struct canchip_t *chip, unsigned long code, unsigned lon
 
        DEBUGMSG("Set extended_mask [id:0x%08x RTR=%lu, m:0x%08x RTR=%lu]\n", (uint32_t)(code >> 1), code & 0x00000001, (uint32_t)(mask >> 1), mask & 0x00000001);
        DUMPFLT(chip);
-    
+
         return 0;
 }
 
@@ -619,7 +619,7 @@ int mscan_pre_read_config(struct canchip_t *chip, struct msgobj_t *obj)
        DEBUGRX("Pre read config\n");
 
        /* MSCAN has only one buffer, which is already initialized */
-       
+
        return 0;
 }
 
@@ -632,7 +632,7 @@ int mscan_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj, struct
        can_spin_lock(&mscan_prewr_lock);
        can_preempt_disable();
        DEBUGTX("Pre write config\n");
-       
+
        /* find free buffer */
        txf = mscan_get_flags(chip, MSCAN_TFLG_TXE, MSCAN_TFLG);
        for (buff_no = 0; buff_no < 3 && !(txf & (0x01 << buff_no)); buff_no++) { }
@@ -671,13 +671,13 @@ pwrite_exit_fail:
 int mscan_send_msg(struct canchip_t *chip, struct msgobj_t *obj, struct canmsg_t *msg)
 {
        DEBUGTX("Send Message\n");
-       
+
        /* turn on IRQ for this buffer */
        can_write_reg(chip, msg->cob, MSCAN_TIER);
 
        /* clear TX Buffer Empty flag (by writing '1') to initiate trasmition */
        can_write_reg(chip, msg->cob, MSCAN_TFLG);
-       
+
        return 0;
 }
 
@@ -710,11 +710,11 @@ int mscan_irq_handler(int irq, struct canchip_t *chip)
        tx_irq = (MSCAN_TFLG_TXE << 8);         /* to spare few tacts in IRQ loop */
 
        irq_reg = mscan_get_irq_flags(chip);
-       DEBUGMSG("IRQ Handler chip %d (%d)\n", chip->chip_idx, irq); 
+       DEBUGMSG("IRQ Handler chip %d (%d)\n", chip->chip_idx, irq);
 
 
        do {
-               if(!loop_cnt--) 
+               if(!loop_cnt--)
                        goto irqhnd_exit_stuck;
 
                DEBUGMSG("IRR: 0x%04x\n", irq_reg);
@@ -731,7 +731,7 @@ int mscan_irq_handler(int irq, struct canchip_t *chip)
                        mscan_set_flags(chip, MSCAN_RFLG_RXF, MSCAN_RFLG);
                }
 
-               
+
                /* Can Status change - due to RX/TX error counters */
                if(irq_reg & MSCAN_RFLG_CSCIF)
                {
@@ -757,7 +757,7 @@ int mscan_irq_handler(int irq, struct canchip_t *chip)
                                                MSCAN_STAT_CHANGE("RX: ERROR PASSIVE", chip->chip_idx);
                                                /* Show warning only */
                                                break;
-                               
+
                                        case 1: /* bus - warning */
                                                MSCAN_STAT_CHANGE("RX: Bus Warning", chip->chip_idx);
                                                /* Show warning only */
@@ -770,7 +770,7 @@ int mscan_irq_handler(int irq, struct canchip_t *chip)
                                }
                                rxstat = irq_rstat;     /* update static RX status field */
                        }
-       
+
                        /* Transmit bus off/error/warning */
                        if (irq_tstat ^ txstat)
                        {
@@ -788,7 +788,7 @@ int mscan_irq_handler(int irq, struct canchip_t *chip)
                                                MSCAN_STAT_CHANGE("TX: ERROR PASSIVE", chip->chip_idx);
                                                /* Show warning only */
                                                break;
-                               
+
                                        case 1: /* bus - warning */
                                                MSCAN_STAT_CHANGE("TX: Bus Warning", chip->chip_idx);
                                                /* Show warning only */
@@ -808,9 +808,9 @@ int mscan_irq_handler(int irq, struct canchip_t *chip)
 
                /* Message Overrun/Overwritten */
                if (irq_reg & MSCAN_RFLG_OVRIF)
-               { 
+               {
                        CANMSG("Error: MESSAGE OVERRUN/OVERWRITTEN");
-                       
+
                        /* notify only injured RXqueue-end */
                        mscan_notifyRXends(chip->msgobj[0], CANQUEUE_NOTIFY_ERROR);
 
@@ -829,7 +829,7 @@ int mscan_irq_handler(int irq, struct canchip_t *chip)
                        can_spin_unlock(&mscan_prewr_lock);
 
 
-                       /* sends message */         
+                       /* sends message */
                        mscan_wakeup_tx(chip, chip->msgobj[0]);
                }
 
@@ -837,7 +837,7 @@ int mscan_irq_handler(int irq, struct canchip_t *chip)
 
        /* omit RSTAT and TSTAT - they're used only in CSCIF handler */
        } while(irq_reg &
-               mscan_IRQs & 
+               mscan_IRQs &
                ~(MSCAN_RFLG_RSTAT | MSCAN_RFLG_TSTAT));
 
 
@@ -892,10 +892,10 @@ int mscan_clear_objects(struct canchip_t *chip)
        /* clear TX buffers, need to set CANTBSEL register */
        can_write_reg(chip, 0x01, MSCAN_TBSEL);
        mscan_clear_buffer(chip, MSCAN_TXFG);
-       
+
        can_write_reg(chip, 0x02, MSCAN_TBSEL);
        mscan_clear_buffer(chip, MSCAN_TXFG);
-       
+
        can_write_reg(chip, 0x04, MSCAN_TBSEL);
        mscan_clear_buffer(chip, MSCAN_TXFG);
 
@@ -924,7 +924,7 @@ int mscan_wakeup_tx(struct canchip_t *chip, struct msgobj_t *obj)
 {
        can_preempt_disable();
        DEBUGMSG("WakeUP TX\n");
-       
+
         can_msgobj_set_fl(obj, TX_REQUEST);
         while(!can_msgobj_test_and_set_fl(obj, TX_LOCK)) {
                 can_msgobj_clear_fl(obj, TX_REQUEST);
@@ -968,11 +968,11 @@ int mscan_filtch_rq(struct canchip_t *chip, struct msgobj_t * obj)
 
        /* MSCAN uses oposite logic (compared to IP) for LAFM: 1-ignore bit, 0-use bit as mask */
        mask = (~filter.mask) << 1;
-       
+
        /* RTR is LSB of mask */
        if (filter.flags & MSG_RTR)
                mask |= 0x00000001;
-       
+
        if (filter.flags & MSG_EXT)             /* Extended ID */
                return mscan_extended_mask(chip, filter.id, mask);
        else                                    /* Standard ID */
@@ -994,7 +994,7 @@ void mscan_irq_read_handler(struct canchip_t *chip, struct msgobj_t *obj)
        }
 
        mscan_msg_from_rxbuffer(chip, &(obj->rx_msg));
-       
+
        /* fill CAN message timestamp */
        can_filltimestamp(&obj->rx_msg.timestamp);
 
@@ -1085,7 +1085,7 @@ int mscan_fill_chipspecops(struct canchip_t *chip)
        chip->max_objects = 1;
        chip->write_register = chip->hostdevice->hwspecops->write_register;
        chip->read_register = chip->hostdevice->hwspecops->read_register;
-       
+
        /*
        chip->flags;
        chip->baudrate;
@@ -1292,7 +1292,7 @@ static int mscan_update_samplept(int sampl_pt, int tseg, int *tseg1, int *tseg2)
         * difference between tseg and tsegall is:
         *      tsegall = tseg + 1
         */
-       
+
         *tseg2 = tseg + 1 - (sampl_pt * (tseg + 1)) / 1000;
         if (*tseg2 < MSCAN_TSEG2_MIN)
                 *tseg2 = MSCAN_TSEG2_MIN;
@@ -1386,7 +1386,7 @@ static void mscan_clear_flags(struct canchip_t * chip, reg_t flags, unsigned reg
 static uint16_t mscan_get_irq_flags(struct canchip_t * chip)
 {
        /* Transmit Buffer Empty only if enabled */
-       return ((mscan_get_flags(chip, MSCAN_TIER_TXE, MSCAN_TIER) & 
+       return ((mscan_get_flags(chip, MSCAN_TIER_TXE, MSCAN_TIER) &
                 mscan_get_flags(chip, MSCAN_TFLG_TXE, MSCAN_TFLG)) << 8) |
                (mscan_get_flags(chip, (reg_t)(mscan_IRQs & 0xff), MSCAN_RFLG));
 }
@@ -1417,7 +1417,7 @@ static int mscan_abort_msg(struct canchip_t * chip, reg_t buffer_mask)
                goto abortmsg_exit_ok;
        }
 
-       
+
        /* set TARQ - Transmitt Abort Request */
        mscan_set_flags(chip, m, MSCAN_TARQ);
 

diff --git a/lincan/src/msmcan.c b/lincan/src/msmcan.c
index f24bfa5c5bb34347e6439637409d5af0733d14d8..a1801ec4bc4ceebf397ae7a1de64eafb09955a8a 100644 (file)
--- a/lincan/src/msmcan.c
+++ b/lincan/src/msmcan.c
@@ -58,13 +58,13 @@ int msmcan_request_io(struct candevice_t *candev)
                CANMSG("Unable to open port: 0x%lx\n",candev->io_addr);
                return -ENODEV;
        } else {
-               DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr, 
+               DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr,
                         candev->io_addr + IO_RANGE - 1);
        }
        return 0;
 }
 
-/* The function template_release_io is used to free the previously reserved 
+/* The function template_release_io is used to free the previously reserved
  * io-memory. In case you reserved more memory, don't forget to free it here.
  */
 int msmcan_release_io(struct candevice_t *candev)
@@ -93,7 +93,7 @@ int msmcan_reset(struct candevice_t *candev)
        if(0) {
                int tic=jiffies;
                int tac;
-               
+
                msmcan_write_register(iCTL_INI, chip->chip_base_addr+iCTL);
                /*CLKOUT stopped (iCPU_CEN=0) */
                msmcan_write_register(iCPU_DSC, chip->chip_base_addr+iCPU);
@@ -105,8 +105,8 @@ int msmcan_reset(struct candevice_t *candev)
                        }
                        schedule();
                }
-               
-       
+
+
        }
 
        can_disable_irq(chip->chip_irq);
@@ -127,7 +127,7 @@ int msmcan_reset(struct candevice_t *candev)
 #define NR_82527 1
 #define NR_SJA1000 0
 
-int msmcan_init_hw_data(struct candevice_t *candev) 
+int msmcan_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=0;
        candev->nr_82527_chips=1;
@@ -168,7 +168,7 @@ int msmcan_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry obj_base_addr represents the first memory address of the message 
+ * The entry obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -178,7 +178,7 @@ int msmcan_init_obj_data(struct canchip_t *chip, int objnr)
 
        chip->msgobj[objnr]->obj_base_addr=
            chip->chip_base_addr+(objnr+1)*0x10;
-       
+
        return 0;
 }
 
@@ -208,7 +208,7 @@ void msmcan_write_register(unsigned data, can_ioptr_t address)
 
        can_spin_lock_irqsave(&msmcan_port_lock,flags);
        can_outb(addr & 0xff, (addr>>16)+1);
-       can_outb(data, addr>>16); 
+       can_outb(data, addr>>16);
        can_spin_unlock_irqrestore(&msmcan_port_lock,flags);
 }
 
@@ -219,7 +219,7 @@ void msmcan_write_register(unsigned data, can_ioptr_t address)
 unsigned msmcan_read_register(can_ioptr_t address)
 {
        /* this is the same thing that the function write_register.
-          We use the two register, we write the address where we 
+          We use the two register, we write the address where we
           want to read in a first time. In a second time we read the
           data */
        unsigned char ret;
@@ -228,7 +228,7 @@ unsigned msmcan_read_register(can_ioptr_t address)
 
        can_spin_lock_irqsave(&msmcan_port_lock,flags);
        can_outb(addr & 0xff, (addr>>16)+1);
-       ret=can_inb(addr>>16); 
+       ret=can_inb(addr>>16);
        can_spin_unlock_irqrestore(&msmcan_port_lock,flags);
        return ret;
 }

diff --git a/lincan/src/ns_dev_can.c b/lincan/src/ns_dev_can.c
index 6a3d34a0cffa1416d0055d18c23fd85fe1ac6773..5c69a1e5363470be8a326462ddecad0cdc1c64c3 100644 (file)
--- a/lincan/src/ns_dev_can.c
+++ b/lincan/src/ns_dev_can.c
@@ -57,7 +57,7 @@
  */
 int ns_dev_request_io(struct candevice_t *candev)
 {
-       /* Note hard-coded index for the chip number as this 
+       /* Note hard-coded index for the chip number as this
         * only supports a single instance of the C_CAN controller.
         */
        DEBUGMSG("(c%d)ns_dev_request_io (...)\n", candev->chip[0]->chip_idx);
@@ -227,9 +227,9 @@ int ns_dev_init_chip_data(struct candevice_t *candev, int chipnr)
  *
  * The function ns_dev_init_obj_data() is used to initialize the hardware
  * structure containing information about the different message objects on the
- * CAN chip. 
- * The entry @obj_base_addr represents the first memory address of the message 
- * object. 
+ * CAN chip.
+ * The entry @obj_base_addr represents the first memory address of the message
+ * object.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
  * Return Value: The function always returns zero
  * File: src/template.c
@@ -295,10 +295,10 @@ unsigned ns_dev_read_register(can_ioptr_t address)
  * ns_dev_program_irq - program interrupts
  * @candev: Pointer to candevice/board structure
  *
- * The function ns_dev_program_irq() is used for hardware that uses 
+ * The function ns_dev_program_irq() is used for hardware that uses
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
- * leave this function unedited. Again this function is hardware specific so 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
  * File: src/template.c

diff --git a/lincan/src/nsi.c b/lincan/src/nsi.c
index 32876cbd2080de832383eee1ca6516e946b9d797..3aa8c1466e22aa3ac27c4f258dd5128f505fa5bb 100644 (file)
--- a/lincan/src/nsi.c
+++ b/lincan/src/nsi.c
@@ -61,13 +61,13 @@ int nsi_request_io(struct candevice_t *candev)
                CANMSG("Unable to open port: 0x%lx\n",candev->io_addr);
                return -ENODEV;
        } else {
-               DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr, 
+               DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr,
                         candev->io_addr + IO_RANGE - 1);
        }
        return 0;
 }
 
-/* The function template_release_io is used to free the previously reserved 
+/* The function template_release_io is used to free the previously reserved
  * io-memory. In case you reserved more memory, don't forget to free it here.
  */
 int nsi_release_io(struct candevice_t *candev)
@@ -84,7 +84,7 @@ int nsi_release_io(struct candevice_t *candev)
  */
 int nsi_reset(struct candevice_t *candev)
 {
-    int i; 
+    int i;
 
     DEBUGMSG("Resetting nsi hardware ...\n");
     /* we don't use template_write_register because we don't use the two first
@@ -93,9 +93,9 @@ int nsi_reset(struct candevice_t *candev)
     can_outb (0, nsican_base + candev->res_addr);
     for (i = 1; i < 1000; i++)
        udelay (1000);
-    
-    
-    /* Check hardware reset status */ 
+
+
+    /* Check hardware reset status */
     i=0;
     while ( (nsi_read_register(nsican_base+iCPU) & iCPU_RST) && (i<=15)) {
        udelay(20000);
@@ -124,7 +124,7 @@ int nsi_reset(struct candevice_t *candev)
 #define NR_82527 1
 #define NR_SJA1000 0
 
-int nsi_init_hw_data(struct candevice_t *candev) 
+int nsi_init_hw_data(struct candevice_t *candev)
      {
        candev->res_addr=RESET_ADDR;
        candev->nr_82527_chips=1;
@@ -151,7 +151,7 @@ int nsi_init_chip_data(struct candevice_t *candev, int chipnr)
        candev->chip[chipnr]->chip_base_addr=
            can_ioport2ioptr(candev->io_addr);
        candev->chip[chipnr]->clock = 16000000;
-       nsican_irq=candev->chip[chipnr]->chip_irq;      
+       nsican_irq=candev->chip[chipnr]->chip_irq;
         nsican_base=candev->chip[chipnr]->chip_base_addr;
        candev->chip[chipnr]->int_cpu_reg = iCPU_DSC;
        candev->chip[chipnr]->int_clk_reg = iCLK_SL1;
@@ -165,7 +165,7 @@ int nsi_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry obj_base_addr represents the first memory address of the message 
+ * The entry obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -175,7 +175,7 @@ int nsi_init_obj_data(struct canchip_t *chip, int objnr)
 
        chip->msgobj[objnr]->obj_base_addr=
            chip->chip_base_addr+(objnr+1)*0x10;
-       
+
        return 0;
 }
 
@@ -201,9 +201,9 @@ void nsi_write_register(unsigned data, can_ioptr_t address)
     /* the nsi card has two registers, the address register at 0x0
        and the data register at 0x01 */
 
-    /* write the relative address on the eight LSB bits 
+    /* write the relative address on the eight LSB bits
        and the data on the eight MSB bits in one time */
-    can_outw(address-nsican_base + (256 * data), nsican_base); 
+    can_outw(address-nsican_base + (256 * data), nsican_base);
 }
 
 /* The function template_read_register is used to read from hardware registers
@@ -213,12 +213,12 @@ void nsi_write_register(unsigned data, can_ioptr_t address)
 unsigned nsi_read_register(can_ioptr_t address)
 {
     /* this is the same thing that the function write_register.
-       We use the two register, we write the address where we 
+       We use the two register, we write the address where we
        want to read in a first time. In a second time we read the
        data */
        unsigned char ret;
        can_spin_irqflags_t flags;
-    
+
        can_spin_lock_irqsave(&nsican_port_lock,flags);
        can_outb(address-nsican_base, nsican_base);
        ret=can_inb(nsican_base+1);

diff --git a/lincan/src/nsi_canpci.c b/lincan/src/nsi_canpci.c
index 1fee22726cb4693a5a85a65296e0a699371cd4a5..309ec850c692c4fea062dafa152ed97a6c1608f6 100644 (file)
--- a/lincan/src/nsi_canpci.c
+++ b/lincan/src/nsi_canpci.c
@@ -97,7 +97,7 @@ void nsi_canpci_disconnect_irq(struct candevice_t *candev)
 
 int nsi_canpci_config_irqs(struct canchip_t *chip, short irqs)
 {
-       
+
        unsigned long it_mask,it_reg;
        struct candevice_t *candev;
        it_mask=0;
@@ -144,15 +144,15 @@ int nsi_canpci_i82527_chip_config(struct canchip_t *chip)
 {
        can_write_reg(chip,chip->int_cpu_reg,iCPU); // Configure cpu interface
        can_write_reg(chip,(iCTL_CCE|iCTL_INI),iCTL); // Enable configuration
-       i82527_seg_write_reg(chip,chip->int_clk_reg,iCLK); // Set clock out slew rates 
+       i82527_seg_write_reg(chip,chip->int_clk_reg,iCLK); // Set clock out slew rates
        i82527_seg_write_reg(chip,chip->int_bus_reg,iBUS); /* Bus configuration */
-       
+
        can_write_reg(chip,P2_2|P2_1,iP2C); // The pin P2_2,P2_1 of the 527 must be set as output
        can_write_reg(chip,P2_2|P2_1,iP2O); // and P2_2 must be set to 1
-       
+
        can_write_reg(chip,0x00,iSTAT); /* Clear error status register */
 
-       /* Check if we can at least read back some arbitrary data from the 
+       /* Check if we can at least read back some arbitrary data from the
         * card. If we can not, the card is not properly configured!
         */
        canobj_write_reg(chip,chip->msgobj[1],0x25,iMSGDAT1);
@@ -191,11 +191,11 @@ int nsi_canpci_i82527_chip_config(struct canchip_t *chip)
                CANMSG("Error clearing message objects\n");
                return -ENODEV;
        }
-       
+
        if (nsi_canpci_config_irqs(chip,iCTL_IE|iCTL_EIE)) { /* has been 0x0a */
                CANMSG("Error configuring interrupts\n");
                return -ENODEV;
-       }       
+       }
        return 0;
 }
 
@@ -220,7 +220,7 @@ int nsi_canpci_start_chip(struct canchip_t *chip)
        rmb();
        it_reg|=it_mask|0x40;
        iowrite32(it_reg,(void*)(candev->io_addr+PLX_INTCSR));
-       wmb();  
+       wmb();
        i82527_start_chip(chip);
        return 0;
 }
@@ -245,7 +245,7 @@ int nsi_canpci_stop_chip(struct canchip_t *chip)
        rmb();
        it_reg&=~it_mask;
        iowrite32(it_reg,(void*)(candev->io_addr+PLX_INTCSR));
-       wmb();  
+       wmb();
        i82527_stop_chip(chip);
        return 0;
 }
@@ -272,7 +272,7 @@ int nsi_canpci_irq_handler(int irq, struct canchip_t *chip)
                        {
                                retcode=CANCHIP_IRQ_HANDLED;
                        }
-               
+
                }
        }
        else
@@ -286,7 +286,7 @@ int nsi_canpci_irq_handler(int irq, struct canchip_t *chip)
                        }else
                        {
                                retcode=CANCHIP_IRQ_HANDLED;
-                       }       
+                       }
                }
        }
        return retcode;
@@ -301,11 +301,11 @@ int nsi_canpci_request_io(struct candevice_t *candev)
 {
   (void)candev;
   if(candev->dev_base_addr==0)
-       return -EIO;  
+       return -EIO;
   return 0;
 }
 
-/* The function template_release_io is used to free the previously reserved 
+/* The function template_release_io is used to free the previously reserved
  * io-memory. In case you reserved more memory, don't forget to free it here.
  */
 int nsi_canpci_release_io(struct candevice_t *candev)
@@ -313,7 +313,7 @@ int nsi_canpci_release_io(struct candevice_t *candev)
        unsigned long reg_reset;
        struct pci_dev *pcidev = candev->sysdevptr.pcidev;
        DEBUGMSG("Releasing board io\n");
-       
+
        nsi_canpci_disconnect_irq(candev);
        // First, set RESET signal to 0
        reg_reset = ioread32( (void*)(candev->io_addr+PLX_CNTRL));
@@ -333,8 +333,8 @@ int nsi_canpci_release_io(struct candevice_t *candev)
        kfree((void*)(candev->dev_base_addr));
        pci_release_region(pcidev,0);
        pci_release_region(pcidev,1);
-       pci_release_region(pcidev,2);                   
-       pci_release_region(pcidev,3);                   
+       pci_release_region(pcidev,2);
+       pci_release_region(pcidev,3);
        return 0;
 }
 
@@ -345,9 +345,9 @@ int nsi_canpci_release_io(struct candevice_t *candev)
 int nsi_canpci_reset(struct candevice_t *candev)
 {
        unsigned long reg_reset;
-       
+
        DEBUGMSG("Board reset !!!\n");
-       // Before reset disconnet interrupt to avoir freeze     
+       // Before reset disconnet interrupt to avoir freeze
        nsi_canpci_disconnect_irq(candev);
        // First, set RESET signal to 0
        reg_reset = ioread32( (void*)(candev->io_addr+PLX_CNTRL));
@@ -360,9 +360,9 @@ int nsi_canpci_reset(struct candevice_t *candev)
        wmb();
        udelay(2500); // Waiting for some additionnal time before writing in the 82527
        DEBUGMSG("Reset done !!!\n");
-       
+
        nsi_canpci_connect_irq(candev);
-       return 0;       
+       return 0;
 }
 
 /* The function template_init_hw_data is used to initialize the hardware
@@ -374,7 +374,7 @@ int nsi_canpci_reset(struct candevice_t *candev)
  * the hardware uses programmable interrupts.
  */
 
-int nsi_canpci_init_hw_data(struct candevice_t *candev) 
+int nsi_canpci_init_hw_data(struct candevice_t *candev)
 {
        struct pci_dev *pcidev;
 
@@ -387,7 +387,7 @@ int nsi_canpci_init_hw_data(struct candevice_t *candev)
                return -ENODEV;
        }
 
-       CANMSG ("NSI CANPCI device found\n");  
+       CANMSG ("NSI CANPCI device found\n");
 
   /* enable it */
   if (pci_enable_device (pcidev))
@@ -400,7 +400,7 @@ int nsi_canpci_init_hw_data(struct candevice_t *candev)
   candev->res_addr=0;
   candev->nr_82527_chips=2;
   candev->nr_sja1000_chips=0;
-  candev->nr_all_chips=2; 
+  candev->nr_all_chips=2;
   /* initialize device spinlock */
   can_spin_lock_init(&candev->device_lock);
 
@@ -417,7 +417,7 @@ int nsi_canpci_init_hw_data(struct candevice_t *candev)
                        {
                        pci_release_region(pcidev,0);
                        pci_release_region(pcidev,1);
-                       pci_release_region(pcidev,2);                   
+                       pci_release_region(pcidev,2);
                        goto error_io;
                        }
                }
@@ -433,16 +433,16 @@ int nsi_canpci_init_hw_data(struct candevice_t *candev)
        pci_release_region(pcidev,0);
        goto error_io;
        }
-  }  
+  }
   else
   {
        goto error_io;
   }
-  candev->dev_base_addr=(unsigned long)(kmalloc(sizeof(t_CardArray),GFP_ATOMIC));  
-  
+  candev->dev_base_addr=(unsigned long)(kmalloc(sizeof(t_CardArray),GFP_ATOMIC));
+
   if((unsigned long)candev->dev_base_addr==0)
        goto error_io;
-  //PLX register 
+  //PLX register
   ((t_CardArray*)(candev->dev_base_addr))->addr_BAR_remap[0]=ioremap(pci_resource_start(pcidev,0),pci_resource_len(pcidev,0) );
   //PLX IO
   ((t_CardArray*)(candev->dev_base_addr))->addr_BAR_remap[1]=ioremap(pci_resource_start(pcidev,1),pci_resource_len(pcidev,1) );
@@ -450,10 +450,10 @@ int nsi_canpci_init_hw_data(struct candevice_t *candev)
   ((t_CardArray*)(candev->dev_base_addr))->addr_BAR_remap[2]=ioremap(pci_resource_start(pcidev,2),pci_resource_len(pcidev,2) );
   //Chip 1
   ((t_CardArray*)(candev->dev_base_addr))->addr_BAR_remap[3]=ioremap(pci_resource_start(pcidev,3),pci_resource_len(pcidev,3) );
-  
+
   //Short acces to plx register
   candev->io_addr=(unsigned long)(((t_CardArray*)(candev->dev_base_addr))->addr_BAR_remap[0]);
-  return 0;  
+  return 0;
 
 error_io:
        can_pci_dev_put(pcidev);
@@ -483,14 +483,14 @@ int nsi_canpci_init_chip_data(struct candevice_t *candev, int chipnr)
        //u8 irq_line;
        CANMSG ("NSI chip data init %d\n",chipnr);
        i82527_fill_chipspecops(candev->chip[chipnr]);
-       
+
        candev->chip[chipnr]->chipspecops->chip_config =nsi_canpci_i82527_chip_config;
        candev->chip[chipnr]->chipspecops->start_chip=nsi_canpci_start_chip;
        candev->chip[chipnr]->chipspecops->stop_chip=nsi_canpci_stop_chip;
        candev->chip[chipnr]->chipspecops->config_irqs=nsi_canpci_config_irqs;
        candev->chip[chipnr]->chipspecops->irq_handler=nsi_canpci_irq_handler;
        /*candev->chip[chipnr]->chip_data = NULL;*/
-       
+
        candev->chip[chipnr]->chip_base_addr= (unsigned long) (((t_CardArray*)(candev->dev_base_addr))->addr_BAR_remap[chipnr+2]);
        candev->chip[chipnr]->clock = iCLOCK;
        candev->chip[chipnr]->chip_irq=candev->sysdevptr.pcidev->irq;
@@ -506,7 +506,7 @@ int nsi_canpci_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry obj_base_addr represents the first memory address of the message 
+ * The entry obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -514,10 +514,10 @@ int nsi_canpci_init_chip_data(struct candevice_t *candev, int chipnr)
 int nsi_canpci_init_obj_data(struct canchip_t *chip, int objnr)
 {
 
-       
+
        chip->msgobj[objnr]->obj_base_addr=
            chip->chip_base_addr+(objnr+1)*0x10;
-       
+
        return 0;
 }
 

diff --git a/lincan/src/open.c b/lincan/src/open.c
index 535c2c3848134130ca6eb43d8c86df4a9af7994d..f785e2c17efe5212b1680d1b2ababec2512122c9 100644 (file)
--- a/lincan/src/open.c
+++ b/lincan/src/open.c
@@ -51,7 +51,7 @@ int can_open(struct inode *inode, struct file *file)
        can_spin_irqflags_t iflags;
        char openflag;          // Martin Petera: Object already opened
 
-       if ( ((obj=objects_p[MINOR_NR]) == NULL) || 
+       if ( ((obj=objects_p[MINOR_NR]) == NULL) ||
                        ((chip=objects_p[MINOR_NR]->hostchip) == NULL) ) {
                CANMSG("There is no hardware support for the device file with minor nr.: %d\n",MINOR_NR);
                return -ENODEV;
@@ -62,13 +62,13 @@ int can_open(struct inode *inode, struct file *file)
        openflag = can_msgobj_test_fl(obj,OPENED);      // Martin Petera: store previous status
        can_msgobj_set_fl(obj,OPENED);
 
-       if (chip->flags & CHIP_CONFIGURED) 
+       if (chip->flags & CHIP_CONFIGURED)
                DEBUGMSG("Device is already configured.\n");
        else {
                if (chip->chipspecops->chip_config(chip))
                        CANMSG("Error configuring chip.\n");
                else
-                       chip->flags |= CHIP_CONFIGURED; 
+                       chip->flags |= CHIP_CONFIGURED;
        } /* End of chip configuration */
 
 
@@ -95,7 +95,7 @@ int can_open(struct inode *inode, struct file *file)
        if(qends == NULL) goto no_qends;
        canqueue_ends_init_kern(qends);
        canuser->qends = qends;
-       
+
        /*required to synchronize with RT-Linux context*/
        can_spin_lock_irqsave(&canuser_manipulation_lock, iflags);
        list_add(&canuser->peers, &obj->obj_users);
@@ -112,7 +112,7 @@ int can_open(struct inode *inode, struct file *file)
 
 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,50))
        MOD_INC_USE_COUNT;
-#endif 
+#endif
 
        return 0;
 

diff --git a/lincan/src/open_rtl.c b/lincan/src/open_rtl.c
index b6cbc03b160e357a5704b8d7622a717d6f67f89b..80904955044f43f3fbe4e33a20e9a82c6cdec59b 100644 (file)
--- a/lincan/src/open_rtl.c
+++ b/lincan/src/open_rtl.c
@@ -56,16 +56,16 @@ int can_open_rtl_common(struct canuser_t *canuser, int open_flags)
        can_spin_irqflags_t iflags;
 
        if(!obj) return -ENODEV;
-       
+
        can_msgobj_set_fl(obj,OPENED);
-       
+
        chip=obj->hostchip;
        if (chip) {
                if (!(chip->flags & CHIP_CONFIGURED)) {
                        if (chip->chipspecops->chip_config(chip))
                                CANMSG("Error configuring chip.\n");
                        else
-                               chip->flags |= CHIP_CONFIGURED; 
+                               chip->flags |= CHIP_CONFIGURED;
 
                        if (chip->chipspecops->pre_read_config(chip,obj)<0)
                                CANMSG("Error initializing chip for receiving\n");
@@ -80,7 +80,7 @@ int can_open_rtl_common(struct canuser_t *canuser, int open_flags)
        /* mark memory as allocated from RTL memory pool */
        qends->ends_flags|=CAN_ENDSF_MEM_RTL;
        canuser->qends = qends;
-       
+
        can_spin_lock_irqsave(&canuser_manipulation_lock, iflags);
        list_add(&canuser->peers, &obj->obj_users);
        can_spin_unlock_irqrestore(&canuser_manipulation_lock, iflags);
@@ -96,10 +96,10 @@ int can_open_rtl_common(struct canuser_t *canuser, int open_flags)
 
 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,50))
        MOD_INC_USE_COUNT;      /*is this enough for RT-Linux context ?*/
-#endif 
+#endif
 
        return 0;
-       
+
     no_rx_qedge:
        canque_notify_bothends(edge, CANQUEUE_NOTIFY_DEAD_WANTED);
        canque_edge_decref(edge);
@@ -121,11 +121,11 @@ int can_open_rtl_posix(struct rtl_file *fptr)
        struct canchip_t *chip;
        struct canuser_t *canuser;
        int minor_nr = RTL_MINOR_FROM_FILEPTR(fptr);
-       
+
        if(minor_nr>=MAX_TOT_MSGOBJS)
                return -ENODEV;
 
-       if ( ((obj=objects_p[minor_nr]) == NULL) || 
+       if ( ((obj=objects_p[minor_nr]) == NULL) ||
                        ((chip=objects_p[minor_nr]->hostchip) == NULL) ) {
                CANMSG("There is no hardware support for the device file with minor nr.: %d\n",minor_nr);
                return -ENODEV;
@@ -156,7 +156,7 @@ int can_open_rtl_posix(struct rtl_file *fptr)
 
     no_canuser:
        atomic_dec(&obj->obj_used);
-       
+
        return ret;
 }
 

diff --git a/lincan/src/oscar.c b/lincan/src/oscar.c
index 95c555a8f901053c3e781ff5fa29232074d1359e..2bc59370b884d0737880286f983384a18d73de59 100644 (file)
--- a/lincan/src/oscar.c
+++ b/lincan/src/oscar.c
@@ -88,7 +88,7 @@ int oscar_reset(struct candevice_t *candev)
        return 0;
 }
 
-int oscar_init_hw_data(struct candevice_t *candev) 
+int oscar_init_hw_data(struct candevice_t *candev)
 {
     candev->res_addr = 0x0; // RESET address?
     candev->nr_82527_chips = 0;
@@ -104,7 +104,7 @@ int oscar_init_chip_data(struct candevice_t *candev, int chipnr)
     // i82527_fill_chipspecops(candev->chip[chipnr]);
     // sja1000_fill_chipspecops(candev->chip[chipnr]);
     sja1000p_fill_chipspecops(candev->chip[chipnr]);
-       
+
     candev->chip[chipnr]->chip_base_addr = can_ioport2ioptr(candev->io_addr);
     candev->chip[chipnr]->clock = 12000000;
     candev->chip[chipnr]->sja_cdr_reg = sjaCDR_CBP;  // we use an external tranceiver
@@ -113,21 +113,21 @@ int oscar_init_chip_data(struct candevice_t *candev, int chipnr)
     candev->chip[chipnr]->int_cpu_reg = 0;
     candev->chip[chipnr]->int_clk_reg = 0;
     candev->chip[chipnr]->int_bus_reg = 0;
-    
+
     return 0;
 }
 
 int oscar_init_obj_data(struct canchip_t *chip, int objnr)
 {
     chip->msgobj[objnr]->obj_base_addr = chip->chip_base_addr;
-    
+
     return 0;
 }
 
 int oscar_program_irq(struct candevice_t *candev)
 {
     // CAN_IRQ_L (active low) interrupt: PF2 / INT2 on our LH7A400 SoC
-    // This IRQ is set up already by the kernel.    
+    // This IRQ is set up already by the kernel.
 
     return 0;
 }

diff --git a/lincan/src/pc_i03.c b/lincan/src/pc_i03.c
index eb4653c724160a697628ce216b6e915420efb507..f20b0ac0f6e30f351fe3793ad599d86a6f75d099 100644 (file)
--- a/lincan/src/pc_i03.c
+++ b/lincan/src/pc_i03.c
@@ -42,7 +42,7 @@
  * we need it global, else we have to change many internal functions.
  * pc-i03_base_addr is initialized in pc-i03_init_chip_data().
  */
-unsigned int pci03_base_addr; 
+unsigned int pci03_base_addr;
 
 /*
  * IO_RANGE is the io-memory range that gets reserved, please adjust according
@@ -58,7 +58,7 @@ unsigned int pci03_base_addr;
  *
  * The function pci03_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
- * will have to add the code to reserve this memory as well. 
+ * will have to add the code to reserve this memory as well.
  * %IO_RANGE is the io-memory range that gets reserved, please adjust according
  * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
  * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
@@ -99,8 +99,8 @@ int pci03_release_io(struct candevice_t *candev)
  * pci03_reset - hardware reset routine
  * @candev: Pointer to candevice/board structure
  *
- * The function pci03_reset() is used to give a hardware reset. This is 
- * rather hardware specific so I haven't included example code. Don't forget to 
+ * The function pci03_reset() is used to give a hardware reset. This is
+ * rather hardware specific so I haven't included example code. Don't forget to
  * check the reset status of the chip before returning.
  * Return Value: The function returns zero on success or %-ENODEV on failure
  * File: src/pc-i03.c
@@ -115,7 +115,7 @@ int pci03_reset(struct candevice_t *candev)
        udelay(20000);
 
        pci03_write_register(0x00, pci03_base_addr + SJACR);
-                                                                       
+
        /* Check hardware reset status */
        i=0;
        while ( (pci03_read_register(pci03_base_addr + SJACR) & sjaCR_RR)
@@ -152,7 +152,7 @@ int pci03_reset(struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/pc-i03.c
  */
-int pci03_init_hw_data(struct candevice_t *candev) 
+int pci03_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=RESET_ADDR;
        candev->nr_82527_chips=NR_82527;
@@ -184,7 +184,7 @@ int pci03_init_hw_data(struct candevice_t *candev)
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
- * The entry @int_bus_reg holds hardware specific options for the Bus 
+ * The entry @int_bus_reg holds hardware specific options for the Bus
  * Configuration register. Options defined in the %i82527.h file:
  * %iBUS_DR0, %iBUS_DR1, %iBUS_DT1, %iBUS_POL, %iBUS_CBY.
  * Return Value: The function always returns zero
@@ -197,7 +197,7 @@ int pci03_init_chip_data(struct candevice_t *candev, int chipnr)
        candev->chip[chipnr]->chip_base_addr=candev->io_addr;
        candev->chip[chipnr]->clock = 16000000;
        candev->chip[chipnr]->sja_cdr_reg = sjaCDR_CBP | sjaCDR_CLK_OFF;
-       candev->chip[chipnr]->sja_ocr_reg = sjaOCR_MODE_NORMAL | 
+       candev->chip[chipnr]->sja_ocr_reg = sjaOCR_MODE_NORMAL |
                                                        sjaOCR_TX0_HL | sjaOCR_TX1_LZ;
 
        return 0;
@@ -213,7 +213,7 @@ int pci03_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry @obj_base_addr represents the first memory address of the message 
+ * The entry @obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 @obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -223,7 +223,7 @@ int pci03_init_chip_data(struct candevice_t *candev, int chipnr)
 int pci03_init_obj_data(struct canchip_t *chip, int objnr)
 {
        chip->msgobj[objnr]->obj_base_addr=chip->chip_base_addr;
-       
+
        return 0;
 }
 
@@ -231,10 +231,10 @@ int pci03_init_obj_data(struct canchip_t *chip, int objnr)
  * pci03_program_irq - program interrupts
  * @candev: Pointer to candevice/board structure
  *
- * The function pci03_program_irq() is used for hardware that uses 
+ * The function pci03_program_irq() is used for hardware that uses
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
- * leave this function unedited. Again this function is hardware specific so 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
  * File: src/pc-i03.c

diff --git a/lincan/src/pcan_dongle.c b/lincan/src/pcan_dongle.c
index 386725b23123ca6dbe385ec3f3ae58d0bacb9d51..7757efbddf73f97f1d59295290c2c5dbce72de8f 100644 (file)
--- a/lincan/src/pcan_dongle.c
+++ b/lincan/src/pcan_dongle.c
@@ -291,7 +291,7 @@ static int pcan_dongle_probe(struct DONGLE_PORT *dng) // probe for type
   struct parport *p;
 
   DEBUGMSG("%s: pcan_dongle_probe() - PARPORT_SUBSYSTEM\n", DEVICE_NAME);
-  
+
   // probe does not probe for the sja1000 device here - this is done at sja1000_open()
   p = parport_find_base(dng->dwPort);
   if (!p)
@@ -301,14 +301,14 @@ static int pcan_dongle_probe(struct DONGLE_PORT *dng) // probe for type
   }
   else
   {
-       dng->pardev = parport_register_device(p, "can", NULL, NULL, 
+       dng->pardev = parport_register_device(p, "can", NULL, NULL,
                           (PARPORT_IRQ_HANLDER)dng->chip->chipspecops->irq_handler,
                          0, (void *)dng->chip);
-       
+
 //    DEBUGMSG("datos IRQ: irq_handler=0x%x p=0x%x dng->chip=0x%x dng->pardev->port->irq=0x%x irq_handler2=0x%x\n",
 //             dng->chip->chipspecops->irq_handler,
 //             p,dng->chip,dng->pardev->port->irq, &sja1000p_irq_handler);
-                                     
+
     if (!dng->pardev)
     {
       DEBUGMSG("found no parport device\n");
@@ -316,7 +316,7 @@ static int pcan_dongle_probe(struct DONGLE_PORT *dng) // probe for type
     }
 
   }
-  
+
   return 0;
 }
 
@@ -325,11 +325,11 @@ static int pcan_dongle_open(struct DONGLE_PORT *dng)
 {
   int result = 0;
   u16 wPort;
-  
+
   DEBUGMSG("%s: pcan_dongle_open()\n", DEVICE_NAME);
-  
+
   result = parport_claim(dng->pardev);
-  
+
   if (!result)
   {
     if (dng->pardev->port->irq == PARPORT_IRQ_NONE)
@@ -339,25 +339,25 @@ static int pcan_dongle_open(struct DONGLE_PORT *dng)
     }
   }
   else
-   DEBUGMSG(KERN_ERR "%s: can't claim parport.\n", DEVICE_NAME);       
-  
+   DEBUGMSG(KERN_ERR "%s: can't claim parport.\n", DEVICE_NAME);
+
   // save port state
   if (!result)
    {
       wPort    = (u16)dng->dwPort;
-         
+
      // save old port contents
      dng->ucOldDataContent     = can_inb(wPort);
      dng->ucOldControlContent  = can_inb(wPort + 2);
-         
+
      // switch to epp mode if possible
      if (dng->wType == HW_DONGLE_SJA_EPP)
-        setECR(dng); 
-  
+        setECR(dng);
+
     // enable irqs
     _parport_enable_irq(dng); // parport_enable_irq(dng->pardev->port); not working since 2.4.18
-  }    
-       
+  }
+
   return result;
 }
 
@@ -366,84 +366,84 @@ static int pcan_dongle_release(struct DONGLE_PORT *dng)
   u16 wPort = (u16)dng->dwPort;
 
   DEBUGMSG("%s: pcan_dongle_release()\n", DEVICE_NAME);
-  
+
   // disable irqs
   _parport_disable_irq(dng); // parport_disable_irq(dng->pardev->port); not working since 2.4.18
 
   if (dng->wType == HW_DONGLE_SJA_EPP)
     restoreECR(dng);
-    
+
   // restore port state
   can_outb(dng->ucOldDataContent, wPort);
   can_outb(dng->ucOldControlContent, wPort + 2);
-      
+
   parport_release(dng->pardev);
-  
+
   return 0;
 }
 
 int  pcan_dongle_init(struct DONGLE_PORT *dng, u32 dwPort, u16 wIrq, char *type)
 {
   int err;
-  
+
   DEBUGMSG("%s: pcan_dongle_init(), dng_devices = %d\n", DEVICE_NAME, dng_devices);
-  
+
   dng->type = type;
 
   dng->wType = (!strncmp(dongle_type, "sp", 4)) ? HW_DONGLE_SJA : HW_DONGLE_SJA_EPP;
-  
-  // set this before any instructions, fill struct pcandev, part 1 
-  dng->wInitStep   = 0;  
-        
+
+  // set this before any instructions, fill struct pcandev, part 1
+  dng->wInitStep   = 0;
+
   // fill struct pcandev, 1st check if a default is set
   if (!dwPort)
   {
     // there's no default available
     if (dng_devices >= DNG_DEFAULT_COUNT)
       return -ENODEV;
-    
+
     dng->dwPort = dng_ports[dng_devices];
   }
   else
     dng->dwPort = dwPort;
-  
+
   if (!wIrq)
   {
     if (dng_devices >= DNG_DEFAULT_COUNT)
       return -ENODEV;
-    
-    dng->wIrq   = dng_irqs[dng_devices];    
+
+    dng->wIrq   = dng_irqs[dng_devices];
   }
   else
-    dng->wIrq   = wIrq;    
-  
+    dng->wIrq   = wIrq;
+
   if (dng->wType == HW_DONGLE_SJA)
     {
-          dng->nMinor        = PCAN_DNG_SP_MINOR_BASE + sp_devices; 
+          dng->nMinor        = PCAN_DNG_SP_MINOR_BASE + sp_devices;
           dng->wEcr = 0; // set to anything
     }
   else
     {
-           dng->nMinor        = PCAN_DNG_EPP_MINOR_BASE + epp_devices;  
+           dng->nMinor        = PCAN_DNG_EPP_MINOR_BASE + epp_devices;
            dng->wEcr = (u16)dng->dwPort + 0x402;
     }
-         
-       // is the device really available?              
+
+       // is the device really available?
   if ((err = pcan_dongle_probe(dng)) < 0)
     return err;
-  
+
   if (dng->wType == HW_DONGLE_SJA)
     sp_devices++;
   else
     epp_devices++;
-         
+
   dng_devices = sp_devices + epp_devices;
-  
+
   dng->wInitStep = 3;
 
-  DEBUGMSG(KERN_INFO "%s: %s device minor %d prepared (io=0x%04x,irq=%d)\n", DEVICE_NAME, 
+  DEBUGMSG(KERN_INFO "%s: %s device minor %d prepared (io=0x%04x,irq=%d)\n", DEVICE_NAME,
                                dng->type, dng->nMinor, dng->dwPort, dng->wIrq);
-       
+
   return 0;
 }
 
@@ -457,7 +457,7 @@ int  pcan_dongle_init(struct DONGLE_PORT *dng, u32 dwPort, u16 wIrq, char *type)
  *
  * The function template_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
- * will have to add the code to reserve this memory as well. 
+ * will have to add the code to reserve this memory as well.
  * %IO_RANGE is the io-memory range that gets reserved, please adjust according
  * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
  * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
@@ -491,7 +491,7 @@ int pcan_dongle_release_io(struct candevice_t *candev)
 {
        /* release I/O port */
        pcan_dongle_release(&dongle_port);
-       
+
        pcan_dongle_cleanup(&dongle_port);
 
        return 0;
@@ -501,8 +501,8 @@ int pcan_dongle_release_io(struct candevice_t *candev)
  * template_reset - hardware reset routine
  * @candev: Pointer to candevice/board structure
  *
- * The function template_reset() is used to give a hardware reset. This is 
- * rather hardware specific so I haven't included example code. Don't forget to 
+ * The function template_reset() is used to give a hardware reset. This is
+ * rather hardware specific so I haven't included example code. Don't forget to
  * check the reset status of the chip before returning.
  * Return Value: The function returns zero on success or %-ENODEV on failure
  * File: src/template.c
@@ -513,14 +513,14 @@ int pcan_dongle_reset(struct candevice_t *candev)
        struct canchip_t *chip;
        int chipnr;
        unsigned cdr;
-       
+
        DEBUGMSG("Resetting pcan_dongle hardware ...\n");
        for(chipnr=0;chipnr<candev->nr_sja1000_chips;chipnr++) {
                chip=candev->chip[chipnr];
 
          pcan_dongle_write_register(sjaMOD_RM, chip->chip_base_addr+SJAMOD);
          udelay(1000);
-       
+
          cdr=pcan_dongle_read_register(chip->chip_base_addr+SJACDR);
          pcan_dongle_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
 
@@ -564,7 +564,7 @@ int pcan_dongle_reset(struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/template.c
  */
-int pcan_dongle_init_hw_data(struct candevice_t *candev) 
+int pcan_dongle_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=RESET_ADDR;
        candev->nr_82527_chips=NR_82527;
@@ -600,7 +600,7 @@ int pcan_dongle_init_hw_data(struct candevice_t *candev)
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
- * The entry @int_bus_reg holds hardware specific options for the Bus 
+ * The entry @int_bus_reg holds hardware specific options for the Bus
  * Configuration register. Options defined in the %i82527.h file:
  * %iBUS_DR0, %iBUS_DR1, %iBUS_DT1, %iBUS_POL, %iBUS_CBY.
  * Return Value: The function always returns zero
@@ -622,8 +622,8 @@ int pcan_dongle_init_chip_data(struct candevice_t *candev, int chipnr)
        candev->chip[chipnr]->sja_cdr_reg = sjaCDR_CBP | sjaCDR_CLK_OFF;
        candev->chip[chipnr]->sja_ocr_reg = sjaOCR_MODE_NORMAL | sjaOCR_TX0_LH;
 
-       candev->chip[chipnr]->flags |= CHIP_IRQ_CUSTOM;  // I don't want setup call request_irq 
-                                     // I'm going to do it through parport_register_device 
+       candev->chip[chipnr]->flags |= CHIP_IRQ_CUSTOM;  // I don't want setup call request_irq
+                                     // I'm going to do it through parport_register_device
 
      }
 
@@ -640,7 +640,7 @@ int pcan_dongle_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry @obj_base_addr represents the first memory address of the message 
+ * The entry @obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 @obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -651,7 +651,7 @@ int pcan_dongle_init_obj_data(struct canchip_t *chip, int objnr)
 {
        chip->msgobj[objnr]->obj_base_addr=chip->chip_base_addr;
        chip->msgobj[objnr]->obj_flags=0;
-       
+
        return 0;
 }
 
@@ -659,10 +659,10 @@ int pcan_dongle_init_obj_data(struct canchip_t *chip, int objnr)
  * template_program_irq - program interrupts
  * @candev: Pointer to candevice/board structure
  *
- * The function template_program_irq() is used for hardware that uses 
+ * The function template_program_irq() is used for hardware that uses
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
- * leave this function unedited. Again this function is hardware specific so 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
  * File: src/template.c
@@ -713,10 +713,10 @@ unsigned pcan_dongle_read_register(can_ioptr_t address)
    u8 val;
 
   address -= dongle_port.chip->chip_base_addr;  // it's in mutiplexed mode
-       
+
   if (dongle_port.wType == HW_DONGLE_SJA)
      val = pcan_dongle_sp_readreg(&dongle_port, (u8) address); // functions for SP port
-  else 
+  else
      val = pcan_dongle_epp_readreg(&dongle_port, (u8) address); // functions for EPP port
 
 //  DEBUGMSG("Read Reg at: 0x%lx data 0x%x \n", address, val);

diff --git a/lincan/src/pccan.c b/lincan/src/pccan.c
index acfab076881a55f975d34eb00c7107be7f4c5aed..7086151a7b926531709ccdd47ee9067221724d23 100644 (file)
--- a/lincan/src/pccan.c
+++ b/lincan/src/pccan.c
@@ -77,7 +77,7 @@ int pccanq_request_io(struct candevice_t *candev)
 {
        unsigned long io_addr;
        int i;
-       
+
        if (pccand_request_io(candev))
                return -ENODEV;
 
@@ -202,7 +202,7 @@ int pccanq_reset(struct candevice_t *candev)
                can_outb(0x00,candev->res_addr);
        }
        outb_p(0x01,candev->res_addr);
-               
+
        can_outb(0x00,candev->chip[2]->chip_base_addr+SJACR);
        can_outb(0x00,candev->chip[3]->chip_base_addr+SJACR);
 
@@ -219,7 +219,7 @@ int pccanq_reset(struct candevice_t *candev)
                        CANMSG("Please check your hardware.\n");
                        return -ENODEV;
                }
-               else 
+               else
                        DEBUGMSG("Chip%d reset status ok.\n",chip_nr);
        }
        for (chip_nr=2; chip_nr<4; chip_nr++) {
@@ -242,7 +242,7 @@ int pccanq_reset(struct candevice_t *candev)
                can_enable_irq(candev->chip[i]->chip_irq);
 
        return 0;
-}      
+}
 
 int pccan_init_hw_data(struct candevice_t *candev)
 {
@@ -279,7 +279,7 @@ int pccan_init_chip_data(struct candevice_t *candev, int chipnr)
                        candev->chip[chipnr]->int_clk_reg=iCLK_SL1;
                        candev->chip[chipnr]->int_bus_reg=iBUS_CBY;
                        candev->chip[chipnr]->sja_cdr_reg = 0;
-                       candev->chip[chipnr]->sja_ocr_reg = 0;  
+                       candev->chip[chipnr]->sja_ocr_reg = 0;
                }
                else{
                        sja1000_fill_chipspecops(candev->chip[chipnr]);
@@ -289,8 +289,8 @@ int pccan_init_chip_data(struct candevice_t *candev, int chipnr)
                        candev->chip[chipnr]->int_bus_reg = 0;
                        candev->chip[chipnr]->sja_cdr_reg =
                                                                sjaCDR_CLK_OFF;
-                       candev->chip[chipnr]->sja_ocr_reg = 
-                                               sjaOCR_MODE_NORMAL | sjaOCR_TX0_LH;     
+                       candev->chip[chipnr]->sja_ocr_reg =
+                                               sjaOCR_MODE_NORMAL | sjaOCR_TX0_LH;
                }
                candev->chip[chipnr]->chip_base_addr=can_ioport2ioptr(0x1000*chipnr+0x2000+candev->io_addr);
        }
@@ -302,14 +302,14 @@ int pccan_init_chip_data(struct candevice_t *candev, int chipnr)
                candev->chip[chipnr]->int_clk_reg = 0;
                candev->chip[chipnr]->int_bus_reg = 0;
                candev->chip[chipnr]->sja_cdr_reg = sjaCDR_CLK_OFF;
-               candev->chip[chipnr]->sja_ocr_reg = 
-                                               sjaOCR_MODE_NORMAL | sjaOCR_TX0_LH;     
+               candev->chip[chipnr]->sja_ocr_reg =
+                                               sjaOCR_MODE_NORMAL | sjaOCR_TX0_LH;
        }
 
        candev->chip[chipnr]->clock = 16000000;
 
        return 0;
-}      
+}
 
 int pccan_init_obj_data(struct canchip_t *chip, int objnr)
 {
@@ -365,7 +365,7 @@ int pccan_program_irq(struct candevice_t *candev)
 
 inline void pccan_write_register(unsigned data, can_ioptr_t address)
 {
-       can_outb(data,address); 
+       can_outb(data,address);
 }
 
 unsigned pccan_read_register(can_ioptr_t address)

diff --git a/lincan/src/pcccan.c b/lincan/src/pcccan.c
index cbb4dbb0d57120cd6e646dd0b7e121c89bd82c1f..a84fca19aae45a9519c82d66ddf7faa89e23a2e9 100644 (file)
--- a/lincan/src/pcccan.c
+++ b/lincan/src/pcccan.c
@@ -74,7 +74,7 @@ static CAN_DEFINE_SPINLOCK(pcccan_port_lock);
  *
  * The function pcccan_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
- * will have to add the code to reserve this memory as well. 
+ * will have to add the code to reserve this memory as well.
  * %IO_RANGE is the io-memory range that gets reserved, please adjust according
  * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
  * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
@@ -115,8 +115,8 @@ int pcccan_release_io(struct candevice_t *candev)
  * pcccan_reset - hardware reset routine
  * @candev: Pointer to candevice/board structure
  *
- * The function pcccan_reset() is used to give a hardware reset. This is 
- * rather hardware specific so I haven't included example code. Don't forget to 
+ * The function pcccan_reset() is used to give a hardware reset. This is
+ * rather hardware specific so I haven't included example code. Don't forget to
  * check the reset status of the chip before returning.
  * Return Value: The function returns zero on success or %-ENODEV on failure
  * File: src/pcccan.c
@@ -147,7 +147,7 @@ int pcccan_reset(struct candevice_t *candev)
                DEBUGMSG("Chip reset status ok.\n");
 
        return 0;
-} 
+}
 
 #define NR_82527 1
 #define NR_SJA1000 0
@@ -166,7 +166,7 @@ int pcccan_reset(struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/pcccan.c
  */
-int pcccan_init_hw_data(struct candevice_t *candev) 
+int pcccan_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=candev->io_addr;
        candev->nr_82527_chips=NR_82527;
@@ -200,7 +200,7 @@ int pcccan_init_hw_data(struct candevice_t *candev)
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
- * The entry @int_bus_reg holds hardware specific options for the Bus 
+ * The entry @int_bus_reg holds hardware specific options for the Bus
  * Configuration register. Options defined in the %i82527.h file:
  * %iBUS_DR0, %iBUS_DR1, %iBUS_DT1, %iBUS_POL, %iBUS_CBY.
  * The entry @int_cpu_reg holds hardware specific options for the cpu interface
@@ -235,7 +235,7 @@ int pcccan_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry @obj_base_addr represents the first memory address of the message 
+ * The entry @obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 @obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -245,7 +245,7 @@ int pcccan_init_chip_data(struct candevice_t *candev, int chipnr)
 int pcccan_init_obj_data(struct canchip_t *chip, int objnr)
 {
        chip->msgobj[objnr]->obj_base_addr=(objnr+1)*0x10;
-       
+
        return 0;
 }
 
@@ -253,10 +253,10 @@ int pcccan_init_obj_data(struct canchip_t *chip, int objnr)
  * pcccan_program_irq - program interrupts
  * @candev: Pointer to candevice/board structure
  *
- * The function pcccan_program_irq() is used for hardware that uses 
+ * The function pcccan_program_irq() is used for hardware that uses
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
- * leave this function unedited. Again this function is hardware specific so 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
  * File: src/pcccan.c

diff --git a/lincan/src/pcm3680.c b/lincan/src/pcm3680.c
index 4175f1bb3942e92016908e59a54ccf07c3b85446..810b981484ccb2bef645d84321f85b6b16c0f7ea 100644 (file)
--- a/lincan/src/pcm3680.c
+++ b/lincan/src/pcm3680.c
@@ -52,7 +52,7 @@
  *
  * The function template_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
- * will have to add the code to reserve this memory as well. 
+ * will have to add the code to reserve this memory as well.
  * %IO_RANGE is the io-memory range that gets reserved, please adjust according
  * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
  * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
@@ -70,7 +70,7 @@ int pcm3680_request_io(struct candevice_t *candev)
                CANMSG("Unable to access I/O memory at: 0x%lx\n", candev->io_addr);
                can_release_mem_region(candev->io_addr,IO_RANGE);
                return -ENODEV;
-       
+
        }
        can_base_addr_fixup(candev, remap_addr);
        DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr, candev->io_addr + IO_RANGE - 1);
@@ -100,8 +100,8 @@ int pcm3680_release_io(struct candevice_t *candev)
  * template_reset - hardware reset routine
  * @candev: Pointer to candevice/board structure
  *
- * The function template_reset() is used to give a hardware reset. This is 
- * rather hardware specific so I haven't included example code. Don't forget to 
+ * The function template_reset() is used to give a hardware reset. This is
+ * rather hardware specific so I haven't included example code. Don't forget to
  * check the reset status of the chip before returning.
  * Return Value: The function returns zero on success or %-ENODEV on failure
  * File: src/template.c
@@ -111,7 +111,7 @@ int pcm3680_reset(struct candevice_t *candev)
        int i=0;
        struct canchip_t *chip;
        int chipnr;
-       
+
        DEBUGMSG("Resetting pcm3680 hardware ...\n");
        for(chipnr=0;chipnr<candev->nr_sja1000_chips;chipnr++) {
                chip=candev->chip[chipnr];
@@ -153,7 +153,7 @@ int pcm3680_reset(struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/template.c
  */
-int pcm3680_init_hw_data(struct candevice_t *candev) 
+int pcm3680_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=RESET_ADDR;
        candev->nr_82527_chips=NR_82527;
@@ -187,7 +187,7 @@ int pcm3680_init_hw_data(struct candevice_t *candev)
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
- * The entry @int_bus_reg holds hardware specific options for the Bus 
+ * The entry @int_bus_reg holds hardware specific options for the Bus
  * Configuration register. Options defined in the %i82527.h file:
  * %iBUS_DR0, %iBUS_DR1, %iBUS_DT1, %iBUS_POL, %iBUS_CBY.
  * Return Value: The function always returns zero
@@ -218,7 +218,7 @@ int pcm3680_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry @obj_base_addr represents the first memory address of the message 
+ * The entry @obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 @obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -228,7 +228,7 @@ int pcm3680_init_chip_data(struct candevice_t *candev, int chipnr)
 int pcm3680_init_obj_data(struct canchip_t *chip, int objnr)
 {
        chip->msgobj[objnr]->obj_base_addr=chip->chip_base_addr;
-       
+
        return 0;
 }
 
@@ -236,10 +236,10 @@ int pcm3680_init_obj_data(struct canchip_t *chip, int objnr)
  * template_program_irq - program interrupts
  * @candev: Pointer to candevice/board structure
  *
- * The function template_program_irq() is used for hardware that uses 
+ * The function template_program_irq() is used for hardware that uses
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
- * leave this function unedited. Again this function is hardware specific so 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
  * File: src/template.c

diff --git a/lincan/src/pimx1.c b/lincan/src/pimx1.c
index f866766eb3c3dd3438b81f9cc57d18ecf89b69c5..f68841e40c2ad8902abe03ece2ba00c1d8aaa3df 100644 (file)
--- a/lincan/src/pimx1.c
+++ b/lincan/src/pimx1.c
@@ -95,7 +95,7 @@ int pimx1_setup_hardware(struct candevice_t *candev)
  *
  * The function pimx1_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
- * will have to add the code to reserve this memory as well. 
+ * will have to add the code to reserve this memory as well.
  * %IO_RANGE is the io-memory range that gets reserved, please adjust according
  * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
  * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
@@ -110,7 +110,7 @@ int pimx1_request_io(struct candevice_t *candev)
                CANMSG("PiMX1 board hardware setup failure\n");
                return -ENODEV;
        }
-       
+
        if (!can_request_mem_region(candev->io_addr,PIMX1_CAN_IO_RANGE,DEVICE_NAME " - pimx1")) {
                CANMSG("Unable to request IO-memory: 0x%lx\n",candev->io_addr);
                return -ENODEV;
@@ -121,7 +121,7 @@ int pimx1_request_io(struct candevice_t *candev)
                return -ENODEV;
        }
        can_base_addr_fixup(candev, remap_addr);
-       CANMSG("Registered IO-memory: 0x%lx - 0x%lx (VMA 0x%lx)\n", 
+       CANMSG("Registered IO-memory: 0x%lx - 0x%lx (VMA 0x%lx)\n",
                candev->io_addr, candev->io_addr + PIMX1_CAN_IO_RANGE - 1, (long)remap_addr);
        return 0;
 }
@@ -184,8 +184,8 @@ unsigned pimx1_read_register(can_ioptr_t address)
  * pimx1_reset - hardware reset routine
  * @candev: Pointer to candevice/board structure
  *
- * The function pimx1_reset() is used to give a hardware reset. This is 
- * rather hardware specific so I haven't included example code. Don't forget to 
+ * The function pimx1_reset() is used to give a hardware reset. This is
+ * rather hardware specific so I haven't included example code. Don't forget to
  * check the reset status of the chip before returning.
  * Return Value: The function returns zero on success or %-ENODEV on failure
  * File: src/pikronisa.c
@@ -195,10 +195,10 @@ int pimx1_reset(struct candevice_t *candev)
        int i;
        struct canchip_t *chip=candev->chip[0];
        unsigned cdr;
-       
+
        pimx1_write_register(sjaMOD_RM, chip->chip_base_addr+SJAMOD);
        udelay(1000);
-       
+
        cdr=pimx1_read_register(chip->chip_base_addr+SJACDR);
        pimx1_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
 
@@ -216,7 +216,7 @@ int pimx1_reset(struct candevice_t *candev)
        pimx1_write_register(cdr|sjaCDR_PELICAN, chip->chip_base_addr+SJACDR);
 
        pimx1_write_register(0, chip->chip_base_addr+SJAIER);
-       
+
        return 0;
 }
 
@@ -234,7 +234,7 @@ int pimx1_reset(struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/pikronisa.c
  */
-int pimx1_init_hw_data(struct candevice_t *candev) 
+int pimx1_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=PIMX1_CAN_RESET_ADDR;
        candev->io_addr=PIMX1_CAN_IO_ADDRESS;
@@ -270,7 +270,7 @@ int pimx1_init_hw_data(struct candevice_t *candev)
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
- * The entry @int_bus_reg holds hardware specific options for the Bus 
+ * The entry @int_bus_reg holds hardware specific options for the Bus
  * Configuration register. Options defined in the %i82527.h file:
  * %iBUS_DR0, %iBUS_DR1, %iBUS_DT1, %iBUS_POL, %iBUS_CBY.
  * The entry @int_cpu_reg holds hardware specific options for the cpu interface
@@ -305,7 +305,7 @@ int pimx1_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry @obj_base_addr represents the first memory address of the message 
+ * The entry @obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 @obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -322,10 +322,10 @@ int pimx1_init_obj_data(struct canchip_t *chip, int objnr)
  * pimx1_program_irq - program interrupts
  * @candev: Pointer to candevice/board structure
  *
- * The function pimx1_program_irq() is used for hardware that uses 
+ * The function pimx1_program_irq() is used for hardware that uses
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
- * leave this function unedited. Again this function is hardware specific so 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
  * File: src/pikronisa.c

diff --git a/lincan/src/proc.c b/lincan/src/proc.c
index 23f399fcba1cafad29fee57987baed8940c5ffe2..7cb69c3a1da75073aafa7de0fe77fda365b32cb3 100644 (file)
--- a/lincan/src/proc.c
+++ b/lincan/src/proc.c
@@ -196,10 +196,10 @@ int can_init_procdir(void)
 /* can_delete_procdir removes the entire CAN tree from the proc system */
 int can_delete_procdir(void)
 {
-       if (remove_channel_from_procdir()) 
+       if (remove_channel_from_procdir())
                return -ENODEV;
        /* name: "can" */
-       if (can_remove_proc_entry(base->can_proc_entry, CAN_PROC_ROOT)) 
+       if (can_remove_proc_entry(base->can_proc_entry, CAN_PROC_ROOT))
                return -ENODEV;
 
        return 0;

diff --git a/lincan/src/read.c b/lincan/src/read.c
index 8f7ee7974014fc12fe5e0fed9b63692b36506f22..500c9b30d930e341ed3056474cbf94a9ce5d8dfe 100644 (file)
--- a/lincan/src/read.c
+++ b/lincan/src/read.c
@@ -78,13 +78,13 @@ ssize_t can_read(struct file *file, char *buffer, size_t length, loff_t *offset)
                        return -EIO;
                }
        }
-       
+
        ret = copy_to_user(buffer, &slot->msg, sizeof(struct canmsg_t));
        canque_free_outslot(qends, qedge, slot);
        buffer += sizeof(struct canmsg_t);
        bytes_to_copy = length-sizeof(struct canmsg_t);
        if(ret) return -EFAULT;
-       
+
        while (bytes_to_copy > 0) {
                ret=canque_test_outslot(qends, &qedge, &slot);
                if(ret<0)

diff --git a/lincan/src/read_rtl.c b/lincan/src/read_rtl.c
index a4bcf0c76217aeaeed2b020b8efc915e0e78cb40..a08521bb1c6b33fa388eda4569718ee1274c4010 100644 (file)
--- a/lincan/src/read_rtl.c
+++ b/lincan/src/read_rtl.c
@@ -42,8 +42,8 @@
 #include "../include/can_iortl.h"
 
 /* This is the 'Normal' read handler for normal transmission messages */
-static inline 
-ssize_t can_std_read_rtl(struct canque_ends_t *qends, int nonblock_fl, 
+static inline
+ssize_t can_std_read_rtl(struct canque_ends_t *qends, int nonblock_fl,
                        char *buffer, size_t length)
 {
        int ret;
@@ -51,7 +51,7 @@ ssize_t can_std_read_rtl(struct canque_ends_t *qends, int nonblock_fl,
        int bytes_to_copy;
        struct canque_edge_t *qedge;
        struct canque_slot_t *slot;
-       
+
        ret=canque_test_outslot(qends, &qedge, &slot);
        if(ret<0){
                if (nonblock_fl) {
@@ -70,7 +70,7 @@ ssize_t can_std_read_rtl(struct canque_ends_t *qends, int nonblock_fl,
        *(msg_buff++)=slot->msg;
        canque_free_outslot(qends, qedge, slot);
        bytes_to_copy = length-sizeof(struct canmsg_t);
-       
+
        while (bytes_to_copy > 0) {
                ret=canque_test_outslot(qends, &qedge, &slot);
                if(ret<0)
@@ -87,7 +87,7 @@ ssize_t can_std_read_rtl(struct canque_ends_t *qends, int nonblock_fl,
 ssize_t can_read_rtl_posix(struct rtl_file *fptr, char *buffer,
                                size_t length, loff_t *ppos)
 {
-       struct canuser_t *canuser = 
+       struct canuser_t *canuser =
                (struct canuser_t *)can_get_rtl_file_private_data(fptr);
        struct canque_ends_t *qends;
        int      ret;

diff --git a/lincan/src/select.c b/lincan/src/select.c
index ba90950de4b75459652649a67e9e4752d648177b..704aaf42fe3e28ce42546db81362513f1a67a250 100644 (file)
--- a/lincan/src/select.c
+++ b/lincan/src/select.c
@@ -53,7 +53,7 @@ unsigned int can_poll(struct file *file, poll_table *wait)
                CANMSG("can_close: bad canuser magic\n");
                return -ENODEV;
        }
-       
+
        obj = canuser->msgobj;
        qends = canuser->qends;
 

diff --git a/lincan/src/sh7760.c b/lincan/src/sh7760.c
index 67b61af80d43d9ea7c33be31c8a2b32bad5de2bd..51e6d8296dbfc69912c89001ef6673f4cb59c63b 100644 (file)
--- a/lincan/src/sh7760.c
+++ b/lincan/src/sh7760.c
@@ -59,7 +59,7 @@ int sh7760_release_io(struct candevice_t *candev)
 
 int sh7760_reset(struct candevice_t *candev)
 {
-       int i; 
+       int i;
        DEBUGMSG("Resetting HCAN2 chips ...\n");
 
        for (i = 0; i < candev->nr_all_chips; i++)
@@ -71,7 +71,7 @@ int sh7760_reset(struct candevice_t *candev)
        return 0;
 }
 
-int sh7760_init_hw_data(struct candevice_t *candev) 
+int sh7760_init_hw_data(struct candevice_t *candev)
 {
        /* candev->res_addr = RESET_ADDR; */
        candev->nr_82527_chips = NR_82527;
@@ -102,7 +102,7 @@ int sh7760_init_obj_data(struct canchip_t *chip, int objnr)
 
 int sh7760_program_irq(struct candevice_t *candev)
 {
-       /* sh7760 doesn't use programmable interrupt */ 
+       /* sh7760 doesn't use programmable interrupt */
        return 0;
 }
 

diff --git a/lincan/src/sja1000.c b/lincan/src/sja1000.c
index 4ade9af057f30c4e8ba317fb419460cc1ec388e4..507d911c81d0f6a187ff14bcf7f540a3fc1438ff 100644 (file)
--- a/lincan/src/sja1000.c
+++ b/lincan/src/sja1000.c
@@ -93,23 +93,23 @@ int sja1000_chip_config(struct canchip_t *chip)
                return -ENODEV;
 
        /* Set mode, clock out, comparator */
-       can_write_reg(chip,chip->sja_cdr_reg,SJACDR); 
+       can_write_reg(chip,chip->sja_cdr_reg,SJACDR);
        /* Set driver output configuration */
-       can_write_reg(chip,chip->sja_ocr_reg,SJAOCR); 
+       can_write_reg(chip,chip->sja_ocr_reg,SJAOCR);
 
        if (sja1000_standard_mask(chip,0x0000, 0xffff))
                return -ENODEV;
-       
+
        if (!chip->baudrate)
                chip->baudrate=1000000;
        if (sja1000_baud_rate(chip,chip->baudrate,chip->clock,0,75,0))
                return -ENODEV;
 
        /* Enable hardware interrupts */
-       can_write_reg(chip,(sjaCR_RIE|sjaCR_TIE|sjaCR_EIE|sjaCR_OIE),SJACR); 
+       can_write_reg(chip,(sjaCR_RIE|sjaCR_TIE|sjaCR_EIE|sjaCR_OIE),SJACR);
 
        sja1000_disable_configuration(chip);
-       
+
        return 0;
 }
 
@@ -120,16 +120,16 @@ int sja1000_standard_mask(struct canchip_t *chip, unsigned short code, unsigned
        if (sja1000_enable_configuration(chip))
                return -ENODEV;
 
-       /* The acceptance code bits (SJAACR bits 0-7) and the eight most 
+       /* The acceptance code bits (SJAACR bits 0-7) and the eight most
         * significant bits of the message identifier (id.10 to id.3) must be
-        * equal to those bit positions which are marked relevant by the 
+        * equal to those bit positions which are marked relevant by the
         * acceptance mask bits (SJAAMR bits 0-7).
         * (id.10 to id.3) = (SJAACR.7 to SJAACR.0) v (SJAAMR.7 to SJAAMR.0)
         * (Taken from Philips sja1000 Data Sheet)
         */
        write_code = (unsigned char) code >> 3;
        write_mask = (unsigned char) mask >> 3;
-       
+
        can_write_reg(chip,write_code,SJAACR);
        can_write_reg(chip,write_mask,SJAAMR);
 
@@ -154,7 +154,7 @@ int sja1000_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw,
        int best_error = 1000000000, error;
        int best_tseg=0, best_brp=0, best_rate=0, brp=0;
        int tseg=0, tseg1=0, tseg2=0;
-       
+
        if (sja1000_enable_configuration(chip))
                return -ENODEV;
 
@@ -214,9 +214,9 @@ int sja1000_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw,
 int sja1000_pre_read_config(struct canchip_t *chip, struct msgobj_t *obj)
 {
        int i;
-       
+
        i=can_read_reg(chip,SJASR);
-       
+
        if (!(i&sjaSR_RBS)) {
 //Temp
                for (i=0; i<0x20; i++)
@@ -226,7 +226,7 @@ int sja1000_pre_read_config(struct canchip_t *chip, struct msgobj_t *obj)
        sja1000_start_chip(chip);
 
     // disable interrupts for a moment
-       can_write_reg(chip, 0, SJACR); 
+       can_write_reg(chip, 0, SJACR);
 
        sja1000_irq_read_handler(chip, obj);
 
@@ -239,7 +239,7 @@ int sja1000_pre_read_config(struct canchip_t *chip, struct msgobj_t *obj)
 
 #define MAX_TRANSMIT_WAIT_LOOPS 10
 
-int sja1000_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj, 
+int sja1000_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
                                                        struct canmsg_t *msg)
 {
        int i=0, id=0;
@@ -248,11 +248,11 @@ int sja1000_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
        sja1000_start_chip(chip); //sja1000 goes automatically into reset mode on errors
 
        /* Wait until Transmit Buffer Status is released */
-       while ( !(can_read_reg(chip, SJASR) & sjaSR_TBS) && 
+       while ( !(can_read_reg(chip, SJASR) & sjaSR_TBS) &&
                                                i++<MAX_TRANSMIT_WAIT_LOOPS) {
                udelay(i);
        }
-       
+
        if (!(can_read_reg(chip, SJASR) & sjaSR_TBS)) {
                CANMSG("Transmit timed out, cancelling\n");
                can_write_reg(chip, sjaCMR_AT, SJACMR);
@@ -280,7 +280,7 @@ int sja1000_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
        return 0;
 }
 
-int sja1000_send_msg(struct canchip_t *chip, struct msgobj_t *obj, 
+int sja1000_send_msg(struct canchip_t *chip, struct msgobj_t *obj,
                                                        struct canmsg_t *msg)
 {
        can_write_reg(chip, sjaCMR_TR, SJACMR);
@@ -296,7 +296,7 @@ int sja1000_check_tx_stat(struct canchip_t *chip)
                return 1;
 }
 
-int sja1000_set_btregs(struct canchip_t *chip, unsigned short btr0, 
+int sja1000_set_btregs(struct canchip_t *chip, unsigned short btr0,
                                                        unsigned short btr1)
 {
        if (sja1000_enable_configuration(chip))
@@ -390,10 +390,10 @@ int sja1000_irq_handler(int irq, struct canchip_t *chip)
                        return CANCHIP_IRQ_STUCK;
                }
 
-               if ((irq_register & sjaIR_RI) != 0) 
+               if ((irq_register & sjaIR_RI) != 0)
                        sja1000_irq_read_handler(chip, obj);
 
-               if ((irq_register & sjaIR_TI) != 0) { 
+               if ((irq_register & sjaIR_TI) != 0) {
                        can_msgobj_set_fl(obj,TX_REQUEST);
                        while(!can_msgobj_test_and_set_fl(obj,TX_LOCK)){
                                can_msgobj_clear_fl(obj,TX_REQUEST);
@@ -406,7 +406,7 @@ int sja1000_irq_handler(int irq, struct canchip_t *chip)
                        }
                }
 
-               if ((irq_register & (sjaIR_EI|sjaIR_DOI)) != 0) { 
+               if ((irq_register & (sjaIR_EI|sjaIR_DOI)) != 0) {
                        // Some error happened
 // FIXME: chip should be brought to usable state. Transmission cancelled if in progress.
 // Reset flag set to 0 if chip is already off the bus. Full state report
@@ -424,7 +424,7 @@ int sja1000_irq_handler(int irq, struct canchip_t *chip)
                irq_register=can_read_reg(chip, SJAIR);
 
        } while(irq_register & (sjaIR_WUI|sjaIR_DOI|sjaIR_EI|sjaIR_TI|sjaIR_RI));
-       
+
        return CANCHIP_IRQ_HANDLED;
 }
 
@@ -455,13 +455,13 @@ void sja1000_irq_read_handler(struct canchip_t *chip, struct msgobj_t *obj)
 void sja1000_irq_write_handler(struct canchip_t *chip, struct msgobj_t *obj)
 {
        int cmd;
-       
+
        if(obj->tx_slot){
                /* Do local transmitted message distribution if enabled */
                if (processlocal){
                        /* fill CAN message timestamp */
                        can_filltimestamp(&obj->tx_slot->msg.timestamp);
-                       
+
                        obj->tx_slot->msg.flags |= MSG_LOCAL;
                        canque_filter_msg2edges(obj->qends, &obj->tx_slot->msg);
                }
@@ -501,14 +501,14 @@ void sja1000_irq_write_handler(struct canchip_t *chip, struct msgobj_t *obj)
 int sja1000_wakeup_tx(struct canchip_t *chip, struct msgobj_t *obj)
 {
        can_preempt_disable();
-       
+
        can_msgobj_set_fl(obj,TX_REQUEST);
        while(!can_msgobj_test_and_set_fl(obj,TX_LOCK)){
                can_msgobj_clear_fl(obj,TX_REQUEST);
 
                if (can_read_reg(chip, SJASR) & sjaSR_TBS)
                        sja1000_irq_write_handler(chip, obj);
-       
+
                can_msgobj_clear_fl(obj,TX_LOCK);
                if(!can_msgobj_test_fl(obj,TX_REQUEST)) break;
        }

diff --git a/lincan/src/sja1000p.c b/lincan/src/sja1000p.c
index 66fad59f2cfea3e98d191f5e2b0892542b3f70d5..52b2ca5d9602c612aaa98bf39b88d622961a843f 100644 (file)
--- a/lincan/src/sja1000p.c
+++ b/lincan/src/sja1000p.c
@@ -192,7 +192,7 @@ int sja1000p_disable_configuration(struct canchip_t *chip)
  * This function configures chip and prepares it for message
  * transmission and reception. The function resets chip,
  * resets mask for acceptance of all messages by call to
- * sja1000p_extended_mask() function and then 
+ * sja1000p_extended_mask() function and then
  * computes and sets baudrate with use of function sja1000p_baud_rate().
  * Return Value: negative value reports error.
  * File: src/sja1000p.c
@@ -201,19 +201,19 @@ int sja1000p_chip_config(struct canchip_t *chip)
 {
        int i;
        unsigned char n, r;
-       
+
        if (sja1000p_enable_configuration(chip))
                return -ENODEV;
 
        /* Set mode, clock out, comparator */
-       can_write_reg(chip,sjaCDR_PELICAN|chip->sja_cdr_reg,SJACDR); 
+       can_write_reg(chip,sjaCDR_PELICAN|chip->sja_cdr_reg,SJACDR);
 
        /* Ensure, that interrupts are disabled even on the chip level now */
        can_write_reg(chip, sjaDISABLE_INTERRUPTS, SJAIER);
 
        /* Set driver output configuration */
-       can_write_reg(chip,chip->sja_ocr_reg,SJAOCR); 
-       
+       can_write_reg(chip,chip->sja_ocr_reg,SJAOCR);
+
        /* Simple check for chip presence */
        for (i=0, n=0x5a; i<8; i++, n+=0xf) {
                can_write_reg(chip,n,SJAACR0+i);
@@ -226,21 +226,21 @@ int sja1000p_chip_config(struct canchip_t *chip)
                        return -ENODEV;
                }
        }
-       
+
 
        if (sja1000p_extended_mask(chip,0x00000000, 0xffffffff))
                return -ENODEV;
-       
+
        if (!chip->baudrate)
                chip->baudrate=1000000;
        if (sja1000p_baud_rate(chip,chip->baudrate,chip->clock,0,75,0))
                return -ENODEV;
 
        /* Enable hardware interrupts */
-       can_write_reg(chip, sjaENABLE_INTERRUPTS, SJAIER); 
+       can_write_reg(chip, sjaENABLE_INTERRUPTS, SJAIER);
 
        sja1000p_disable_configuration(chip);
-       
+
        return 0;
 }
 
@@ -260,7 +260,7 @@ int sja1000p_extended_mask(struct canchip_t *chip, unsigned long code, unsigned
        if (sja1000p_enable_configuration(chip))
                return -ENODEV;
 
-// LSB to +3, MSB to +0        
+// LSB to +3, MSB to +0
        for(i=SJA_PeliCAN_AC_LEN; --i>=0;) {
                can_write_reg(chip,code&0xff,SJAACR0+i);
                can_write_reg(chip,mask&0xff,SJAAMR0+i);
@@ -294,7 +294,7 @@ int sja1000p_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw,
        int best_error = 1000000000, error;
        int best_tseg=0, best_brp=0, best_rate=0, brp=0;
        int tseg=0, tseg1=0, tseg2=0;
-       
+
        if (sja1000p_enable_configuration(chip))
                return -ENODEV;
 
@@ -340,7 +340,7 @@ int sja1000p_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw,
 
 
        can_write_reg(chip, sjw<<6 | best_brp, SJABTR0);
-       can_write_reg(chip, ((flags & BTR1_SAM) != 0)<<7 | (tseg2<<4) 
+       can_write_reg(chip, ((flags & BTR1_SAM) != 0)<<7 | (tseg2<<4)
                                        | tseg1, SJABTR1);
 
        sja1000p_disable_configuration(chip);
@@ -405,7 +405,7 @@ int sja1000p_pre_read_config(struct canchip_t *chip, struct msgobj_t *obj)
 {
        int status;
        status=can_read_reg(chip,SJASR);
-       
+
        if(status  & sjaSR_BS) {
                /* Try to recover from error condition */
                DEBUGMSG("sja1000p_pre_read_config bus-off recover 0x%x\n",status);
@@ -440,20 +440,20 @@ int sja1000p_pre_read_config(struct canchip_t *chip, struct msgobj_t *obj)
  * Return Value: negative value reports error.
  * File: src/sja1000p.c
  */
-int sja1000p_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj, 
+int sja1000p_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
                                                        struct canmsg_t *msg)
 {
-       int i=0; 
+       int i=0;
        unsigned int id;
        int status;
        int len;
 
        /* Wait until Transmit Buffer Status is released */
-       while ( !((status=can_read_reg(chip, SJASR)) & sjaSR_TBS) && 
+       while ( !((status=can_read_reg(chip, SJASR)) & sjaSR_TBS) &&
                                                i++<MAX_TRANSMIT_WAIT_LOOPS) {
                udelay(i);
        }
-       
+
        if(status & sjaSR_BS) {
                /* Try to recover from error condition */
                DEBUGMSG("sja1000p_pre_write_config bus-off recover 0x%x\n",status);
@@ -519,7 +519,7 @@ int sja1000p_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
  * Return Value: negative value reports error.
  * File: src/sja1000p.c
  */
-int sja1000p_send_msg(struct canchip_t *chip, struct msgobj_t *obj, 
+int sja1000p_send_msg(struct canchip_t *chip, struct msgobj_t *obj,
                                                        struct canmsg_t *msg)
 {
        can_write_reg(chip, sjaCMR_TR, SJACMR);
@@ -553,7 +553,7 @@ int sja1000p_check_tx_stat(struct canchip_t *chip)
  * Return Value: negative value reports error.
  * File: src/sja1000p.c
  */
-int sja1000p_set_btregs(struct canchip_t *chip, unsigned short btr0, 
+int sja1000p_set_btregs(struct canchip_t *chip, unsigned short btr0,
                                                        unsigned short btr1)
 {
        if (sja1000p_enable_configuration(chip))
@@ -701,13 +701,13 @@ int sja1000p_config_irqs(struct canchip_t *chip, short irqs)
 void sja1000p_irq_write_handler(struct canchip_t *chip, struct msgobj_t *obj)
 {
        int cmd;
-       
+
        if(obj->tx_slot){
                /* Do local transmitted message distribution if enabled */
                if (processlocal){
                        /* fill CAN message timestamp */
                        can_filltimestamp(&obj->tx_slot->msg.timestamp);
-                       
+
                        obj->tx_slot->msg.flags |= MSG_LOCAL;
                        canque_filter_msg2edges(obj->qends, &obj->tx_slot->msg);
                }
@@ -715,7 +715,7 @@ void sja1000p_irq_write_handler(struct canchip_t *chip, struct msgobj_t *obj)
                canque_free_outslot(obj->qends, obj->tx_qedge, obj->tx_slot);
                obj->tx_slot=NULL;
        }
-       
+
        can_msgobj_clear_fl(obj,TX_PENDING);
        cmd=canque_test_outslot(obj->qends, &obj->tx_qedge, &obj->tx_slot);
        if(cmd<0)
@@ -745,7 +745,7 @@ void sja1000p_irq_write_handler(struct canchip_t *chip, struct msgobj_t *obj)
  * sja1000p_irq_handler: - interrupt service routine
  * @irq: interrupt vector number, this value is system specific
  * @chip: pointer to chip state structure
- * 
+ *
  * Interrupt handler is activated when state of CAN controller chip changes,
  * there is message to be read or there is more space for new messages or
  * error occurs. The receive events results in reading of the message from
@@ -807,14 +807,14 @@ int sja1000p_irq_handler(int irq, struct canchip_t *chip)
                                DEBUGMSG("TX looping in sja1000_irq_handler\n");
                        }
                }
-               if ((irq_register & (sjaIR_EI|sjaIR_BEI|sjaIR_EPI|sjaIR_DOI)) != 0) { 
+               if ((irq_register & (sjaIR_EI|sjaIR_BEI|sjaIR_EPI|sjaIR_DOI)) != 0) {
                        // Some error happened
                        error_code=can_read_reg(chip,SJAECC);
                        sja1000_report_error(chip, status, irq_register, error_code);
 // FIXME: chip should be brought to usable state. Transmission cancelled if in progress.
 // Reset flag set to 0 if chip is already off the bus. Full state report
                        obj->ret=-1;
-               
+
                        if(error_code == 0xd9) {
                                obj->ret= -ENXIO;
                                /* no such device or address - no ACK received */
@@ -868,9 +868,9 @@ int sja1000p_irq_handler(int irq, struct canchip_t *chip)
  */
 int sja1000p_wakeup_tx(struct canchip_t *chip, struct msgobj_t *obj)
 {
-       
+
        can_preempt_disable();
-       
+
        can_msgobj_set_fl(obj,TX_PENDING);
        can_msgobj_set_fl(obj,TX_REQUEST);
        while(!can_msgobj_test_and_set_fl(obj,TX_LOCK)){
@@ -880,7 +880,7 @@ int sja1000p_wakeup_tx(struct canchip_t *chip, struct msgobj_t *obj)
                        obj->tx_retry_cnt=0;
                        sja1000p_irq_write_handler(chip, obj);
                }
-       
+
                can_msgobj_clear_fl(obj,TX_LOCK);
                if(!can_msgobj_test_fl(obj,TX_REQUEST)) break;
                DEBUGMSG("TX looping in sja1000p_wakeup_tx\n");

diff --git a/lincan/src/smartcan.c b/lincan/src/smartcan.c
index e1e60bef601a49d23c84a1be47678024972fb570..9c6d5e85113dffffaa2b8732694ef7807ab2f5fe 100644 (file)
--- a/lincan/src/smartcan.c
+++ b/lincan/src/smartcan.c
@@ -72,7 +72,7 @@ int smartcan_reset(struct candevice_t *candev)
                i++;
                can_outb(0x01,candev->res_addr);
        }
-       can_outb(0x00,candev->res_addr); 
+       can_outb(0x00,candev->res_addr);
 
        /* Check hardware reset status */
        i=0;
@@ -90,7 +90,7 @@ int smartcan_reset(struct candevice_t *candev)
                DEBUGMSG("Chip0 reset status ok.\n");
 
        return 0;
-} 
+}
 
 int smartcan_init_hw_data(struct candevice_t *candev)
 {
@@ -98,7 +98,7 @@ int smartcan_init_hw_data(struct candevice_t *candev)
        candev->nr_82527_chips=1;
        candev->nr_sja1000_chips=0;
        candev->nr_all_chips=1;
-       
+
        return 0;
 }
 

diff --git a/lincan/src/ssv.c b/lincan/src/ssv.c
index 007a95ef2d5c242bc7d05fdb3053b63163241182..530859d1c0989513ff05cd338c4788f30a172d52 100644 (file)
--- a/lincan/src/ssv.c
+++ b/lincan/src/ssv.c
@@ -61,13 +61,13 @@ int ssv_request_io(struct candevice_t *candev)
                CANMSG("Unable to open port: 0x%lx\n",candev->io_addr);
                return -ENODEV;
        } else {
-               DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr, 
+               DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr,
                         candev->io_addr + IO_RANGE - 1);
        }
        return 0;
 }
 
-/* The function template_release_io is used to free the previously reserved 
+/* The function template_release_io is used to free the previously reserved
  * io-memory. In case you reserved more memory, don't forget to free it here.
  */
 int ssv_release_io(struct candevice_t *candev)
@@ -84,7 +84,7 @@ int ssv_release_io(struct candevice_t *candev)
  */
 int ssv_reset(struct candevice_t *candev)
 {
-    int i; 
+    int i;
 
     DEBUGMSG("Resetting ssv hardware ...\n");
     ssv_write_register(1,ssvcan_base+iCPU);
@@ -95,7 +95,7 @@ int ssv_reset(struct candevice_t *candev)
     for (i = 1; i < 1000; i++)
        udelay (1000);
 
-    /* Check hardware reset status */ 
+    /* Check hardware reset status */
     i=0;
     while ( (ssv_read_register(ssvcan_base+iCPU) & iCPU_RST) && (i<=15)) {
        udelay(20000);
@@ -109,7 +109,7 @@ int ssv_reset(struct candevice_t *candev)
     else
        DEBUGMSG("Chip0 reset status ok.\n");
 
-    /* Check hardware reset status */ 
+    /* Check hardware reset status */
     i=0;
     while ( (ssv_read_register(ssvcan_base+0x100+iCPU) & iCPU_RST) && (i<=15)) {
        udelay(20000);
@@ -140,7 +140,7 @@ int ssv_reset(struct candevice_t *candev)
 #define NR_82527 2
 #define NR_SJA1000 0
 
-int ssv_init_hw_data(struct candevice_t *candev) 
+int ssv_init_hw_data(struct candevice_t *candev)
 {
     candev->res_addr=RESET_ADDR;
     candev->nr_82527_chips=NR_82527;
@@ -181,7 +181,7 @@ int ssv_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry obj_base_addr represents the first memory address of the message 
+ * The entry obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -191,7 +191,7 @@ int ssv_init_obj_data(struct canchip_t *chip, int objnr)
 
     chip->msgobj[objnr]->obj_base_addr=
         chip->chip_base_addr+(objnr+1)*0x10;
-       
+
     return 0;
 }
 
@@ -217,7 +217,7 @@ void ssv_write_register(unsigned data, can_ioptr_t address)
     /* the ssv card has two registers, the address register at 0x0
        and the data register at 0x01 */
 
-    /* write the relative address on the eight LSB bits 
+    /* write the relative address on the eight LSB bits
      and the data on the eight MSB bits in one time */
     if((address-ssvcan_base)<0x100)
        can_outw(address-ssvcan_base + (256 * data), ssvcan_base);
@@ -232,12 +232,12 @@ void ssv_write_register(unsigned data, can_ioptr_t address)
 unsigned ssv_read_register(can_ioptr_t address)
 {
     /* this is the same thing that the function write_register.
-       We use the two register, we write the address where we 
+       We use the two register, we write the address where we
        want to read in a first time. In a second time we read the
        data */
     unsigned char ret;
     can_spin_irqflags_t flags;
-    
+
 
     if((address-ssvcan_base)<0x100)
     {

diff --git a/lincan/src/sysdep_lnx.c b/lincan/src/sysdep_lnx.c
index 1033a5f7e0fa6da3894611ee3a877f7d36df7829..03f45509abf7ed423648b4ca33693c82345e1f0b 100644 (file)
--- a/lincan/src/sysdep_lnx.c
+++ b/lincan/src/sysdep_lnx.c
@@ -55,14 +55,14 @@
  *
  * The function is used in the driver initialization phase to catch possible memory
  * leaks for future driver finalization or case, that driver initialization fail.
- * 
+ *
  * Return Value: pointer to the allocated memory or NULL in the case of fail
  */
 void *can_checked_malloc(size_t size)
 {
        struct mem_addr *mem_new;
        void *address_p;
-       
+
        address_p=kmalloc(size,GFP_KERNEL);
        if(address_p == NULL) {
                CANMSG("can_checked_malloc: out of the memory\n");
@@ -109,9 +109,9 @@ int can_checked_free(void *address_p)
                kfree(address_p);
                return 0;
        }
-       
+
        CANMSG("can_checked_free: address %p not found on the mem list\n", address_p);
-       
+
        kfree(address_p);
        return -1;
 }
@@ -142,7 +142,7 @@ int can_del_mem_list(void)
                kfree(mem->address);
                kfree(mem);
        }
-       
+
        return 0;
 }
 
@@ -254,7 +254,7 @@ struct pci_dev *can_pci_get_next_untaken_subsyst(unsigned int vendor, unsigned i
  *     The CAN driver uses this pointer to store relationship of interrupt
  *     to chip state structure - @struct canchip_t
  * @regs: system dependent value pointing to registers stored in exception frame
- * 
+ *
  * File: src/setup.c
  */
 can_irqreturn_t can_default_irq_dispatch(CAN_IRQ_HANDLER_ARGS(irq_number, dev_id))
@@ -280,7 +280,7 @@ int can_chip_setup_irq(struct canchip_t *chip)
                return 0;
        if(chip->flags & CHIP_IRQ_CUSTOM)
                return 1;
-                       
+
        if ((chip->flags & CHIP_IRQ_VME) == 0) {
                if (request_irq(chip->chip_irq,can_default_irq_dispatch,IRQF_SHARED,DEVICE_NAME,chip))
                        return -1;
@@ -294,7 +294,7 @@ int can_chip_setup_irq(struct canchip_t *chip)
                        CANMSG("Bad irq parameter. (1 <= irq <= 255).\n");
                        return -EINVAL;
                }
-               
+
                request_vmeirq(chip->chip_irq, can_default_irq_dispatch, chip);
                DEBUGMSG("Registered VME interrupt vector %d\n",chip->chip_irq);
                chip->flags |= CHIP_IRQ_SETUP;
@@ -316,7 +316,7 @@ void can_chip_free_irq(struct canchip_t *chip)
 
                if ((chip->flags & CHIP_IRQ_VME) == 0)
                        free_irq(chip->chip_irq, chip);
-               else { 
+               else {
 #ifdef CAN_ENABLE_VME_SUPPORT
                        free_vmeirq(chip->chip_irq);
 #endif

diff --git a/lincan/src/template.c b/lincan/src/template.c
index e5426087ca69c6ad21da955c574218089ded68b8..6708d5bc4eec447e473a2376d3481ffe526e9b9d 100644 (file)
--- a/lincan/src/template.c
+++ b/lincan/src/template.c
@@ -58,7 +58,7 @@
  *
  * The function template_request_io() is used to reserve the io-memory. If your
  * hardware uses a dedicated memory range as hardware control registers you
- * will have to add the code to reserve this memory as well. 
+ * will have to add the code to reserve this memory as well.
  * %IO_RANGE is the io-memory range that gets reserved, please adjust according
  * your hardware. Example: #define IO_RANGE 0x100 for i82527 chips or
  * #define IO_RANGE 0x20 for sja1000 chips in basic CAN mode.
@@ -99,8 +99,8 @@ int template_release_io(struct candevice_t *candev)
  * template_reset - hardware reset routine
  * @candev: Pointer to candevice/board structure
  *
- * The function template_reset() is used to give a hardware reset. This is 
- * rather hardware specific so I haven't included example code. Don't forget to 
+ * The function template_reset() is used to give a hardware reset. This is
+ * rather hardware specific so I haven't included example code. Don't forget to
  * check the reset status of the chip before returning.
  * Return Value: The function returns zero on success or %-ENODEV on failure
  * File: src/template.c
@@ -128,7 +128,7 @@ int template_reset(struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/template.c
  */
-int template_init_hw_data(struct candevice_t *candev) 
+int template_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=RESET_ADDR;
        candev->nr_82527_chips=NR_82527;
@@ -162,7 +162,7 @@ int template_init_hw_data(struct candevice_t *candev)
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
- * The entry @int_bus_reg holds hardware specific options for the Bus 
+ * The entry @int_bus_reg holds hardware specific options for the Bus
  * Configuration register. Options defined in the %i82527.h file:
  * %iBUS_DR0, %iBUS_DR1, %iBUS_DT1, %iBUS_POL, %iBUS_CBY.
  * The entry @int_cpu_reg holds hardware specific options for the cpu interface
@@ -176,7 +176,7 @@ int template_init_chip_data(struct candevice_t *candev, int chipnr)
        i82527_fill_chipspecops(candev->chip[chipnr]);
        /*sja1000_fill_chipspecops(candev->chip[chipnr]);*/
        /*sja1000p_fill_chipspecops(candev->chip[chipnr]);*/
-       
+
        candev->chip[chipnr]->chip_base_addr=can_ioport2ioptr(candev->io_addr);
        candev->chip[chipnr]->clock = 16000000;
        candev->chip[chipnr]->int_cpu_reg = iCPU_DSC;
@@ -199,7 +199,7 @@ int template_init_chip_data(struct candevice_t *candev, int chipnr)
  * CAN chip. In case of the sja1000 there's only one message object but on the
  * i82527 chip there are 15.
  * The code below is for a i82527 chip and initializes the object base addresses
- * The entry @obj_base_addr represents the first memory address of the message 
+ * The entry @obj_base_addr represents the first memory address of the message
  * object. In case of the sja1000 @obj_base_addr is taken the same as the chips
  * base address.
  * Unless the hardware uses a segmented memory map, flags can be set zero.
@@ -209,7 +209,7 @@ int template_init_chip_data(struct candevice_t *candev, int chipnr)
 int template_init_obj_data(struct canchip_t *chip, int objnr)
 {
        chip->msgobj[objnr]->obj_base_addr=chip->chip_base_addr+(objnr+1)*0x10;
-       
+
        return 0;
 }
 
@@ -217,10 +217,10 @@ int template_init_obj_data(struct canchip_t *chip, int objnr)
  * template_program_irq - program interrupts
  * @candev: Pointer to candevice/board structure
  *
- * The function template_program_irq() is used for hardware that uses 
+ * The function template_program_irq() is used for hardware that uses
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
- * leave this function unedited. Again this function is hardware specific so 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and
+ * leave this function unedited. Again this function is hardware specific so
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
  * File: src/template.c

diff --git a/lincan/src/ts7kv.c b/lincan/src/ts7kv.c
index f7fd9510d1506c0a390e82aeb6896c92f6c9518c..e010c00d472381068d0556527b172b1c127e2fb9 100644 (file)
--- a/lincan/src/ts7kv.c
+++ b/lincan/src/ts7kv.c
@@ -384,7 +384,7 @@ void ts7kv_write_register(unsigned data, can_ioptr_t address)
        can_ioptr_t base = can_ulong2ioptr(addr & ~0x1f);
        unsigned char nwin = 0x10;
        unsigned char savewin;
-       
+
        can_spin_irqflags_t flags;
 
        if((addr&0x1f) > 0x1d) {
@@ -421,7 +421,7 @@ unsigned ts7kv_read_register(can_ioptr_t address)
        unsigned char nwin = 0x10;
        unsigned char savewin;
        unsigned val;
-       
+
        can_spin_irqflags_t flags;
 
        if((addr&0x1f) > 0x1d) {

diff --git a/lincan/src/tscan1.c b/lincan/src/tscan1.c
index d90b16dd488cd48ceb19e9f2bf0d61402a9eb78a..0f8fb33f086864850b66404c00ee71df5174ce1b 100644 (file)
--- a/lincan/src/tscan1.c
+++ b/lincan/src/tscan1.c
@@ -411,7 +411,7 @@ int tscan1_init_chip_data(struct candevice_t *candev, int chipnr)
        candev->chip[chipnr]->int_bus_reg = 0x0;
        candev->chip[chipnr]->sja_cdr_reg = sjaCDR_CBP | sjaCDR_CLK_OFF;
        candev->chip[chipnr]->sja_ocr_reg = sjaOCR_MODE_NORMAL | sjaOCR_TX0_LH;
-       /* 
+       /*
         * The address is assigned during tscan1_request_io()
         * according to found free ranges or tscanio option
         */

diff --git a/lincan/src/unican.c b/lincan/src/unican.c
index 10cc185dc4a49f6756bce104e610690edcfa1ec6..ae2934a1cb1a0465201c4c618c3eaa2c8d006f1d 100644 (file)
--- a/lincan/src/unican.c
+++ b/lincan/src/unican.c
@@ -80,7 +80,7 @@ int unican_chip_config(struct canchip_t *chip)
        sCAN_CARD *chipext = (sCAN_CARD *)chip->chip_data;
 
        unican_delay(10);
-       
+
        /* disable all card interrupts */
        ret = cl2_int_mode(chipext, INT_MODE_ALL*0);
        if(ret != CL2_OK) {
@@ -91,13 +91,13 @@ int unican_chip_config(struct canchip_t *chip)
 
         if (chip->baudrate == 0)
                 chip->baudrate=1000000;
-               
+
        ret = chip->chipspecops->baud_rate(chip,chip->baudrate,chip->clock,0,75,0);
        if(ret < 0){
                CANMSG("can not set baudrate\n");
                return ret;
        }
-       
+
        unican_delay(2);
        /* set interrupt inhibit time to 1 ms */
        ret = cl2_set_iit(chipext, 10);
@@ -114,7 +114,7 @@ int unican_chip_config(struct canchip_t *chip)
                return -ENODEV;
        }
        unican_delay(1);
-       
+
        /* enable all card interrupts */
        ret = cl2_int_mode(chipext, INT_MODE_ALL);
        if(ret != CL2_OK) {
@@ -177,12 +177,12 @@ int unican_baud_rate(struct canchip_t *chip, int rate, int clock, int sjw,
                case 1000000:bt_val = CL2_BITRATE_1M; break;
                default: return -EINVAL;
        }
-       
+
        ret=cl2_set_bitrate(chipext,bt_val);
        if(ret == CL2_COMMAND_BUSY) return -EBUSY;
        if(ret != CL2_OK) return -EINVAL;
        unican_delay(2);
-       
+
        return 0;
 }
 
@@ -228,7 +228,7 @@ void unican_read(struct canchip_t *chip, struct msgobj_t *obj) {
                        obj->rx_msg.flags = 0;
                }
 
-               /*if ( !(u & (CL2_REMOTE_FRAME<<8)) ) 
+               /*if ( !(u & (CL2_REMOTE_FRAME<<8)) )
                        obj->rx_msg.flags |= MSG_RTR;*/
 
                obj->rx_msg.length = ( (u >> 4) & 0x000F );
@@ -253,7 +253,7 @@ void unican_read(struct canchip_t *chip, struct msgobj_t *obj) {
                #else /* CAN_MSG_VERSION_2 */
                obj->rx_msg.timestamp = timestamp;
                #endif /* CAN_MSG_VERSION_2 */
-              
+
                /* increment rx-buffer pointer */
                if ( (chipext->rxBufBase + chipext->rxBufSize*16 ) <= (chipext->rxBufPtr += 16) ) {
                        chipext->rxBufPtr = chipext->rxBufBase;
@@ -288,7 +288,7 @@ int unican_pre_read_config(struct canchip_t *chip, struct msgobj_t *obj)
  * Return Value: negative value reports error.
  * File: src/unican.c
  */
-int unican_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj, 
+int unican_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
                                                        struct canmsg_t *msg)
 {
        return 0;
@@ -305,7 +305,7 @@ int unican_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
  * Return Value: negative value reports error.
  * File: src/unican.c
  */
-int unican_send_msg(struct canchip_t *chip, struct msgobj_t *obj, 
+int unican_send_msg(struct canchip_t *chip, struct msgobj_t *obj,
                                                        struct canmsg_t *msg)
 {
        return 0;
@@ -334,7 +334,7 @@ int unican_check_tx_stat(struct canchip_t *chip)
  * Return Value: negative value reports error.
  * File: src/unican.c
  */
-int unican_set_btregs(struct canchip_t *chip, unsigned short btr0, 
+int unican_set_btregs(struct canchip_t *chip, unsigned short btr0,
                                                        unsigned short btr1)
 {
        int ret;
@@ -508,10 +508,10 @@ void unican_irq_write_handler(struct canchip_t *chip, struct msgobj_t *obj)
                cmd=canque_test_outslot(obj->qends, &obj->tx_qedge, &obj->tx_slot);
                if(cmd<0)
                        return;         /* No more messages to send */
-               
+
 
                cobid = obj->tx_slot->msg.id;
-               
+
                if ( (obj->tx_slot->msg.flags & MSG_EXT) ) {    /* 2.0B frame */
                        cobid <<= 3;
                } else {                                        /* 2.0A frame */
@@ -525,10 +525,10 @@ void unican_irq_write_handler(struct canchip_t *chip, struct msgobj_t *obj)
                if(len > CAN_MSG_LENGTH)
                        len = CAN_MSG_LENGTH;
                u = (len << 12) | (cobid & 0x00FF);
-               
-               if ( !(obj->tx_slot->msg.flags & MSG_RTR) ) 
+
+               if ( !(obj->tx_slot->msg.flags & MSG_RTR) )
                        u |= CL2_REMOTE_FRAME<<8;
-               if ( obj->tx_slot->msg.flags & MSG_EXT ) 
+               if ( obj->tx_slot->msg.flags & MSG_EXT )
                        u |= CL2_EXT_FRAME<<8;
 
                unican_writew(u,ptr16++);
@@ -550,7 +550,7 @@ void unican_irq_write_handler(struct canchip_t *chip, struct msgobj_t *obj)
                u = ((cobid>>16) & 0xFF00) | CL2_MESSAGE_VALID;
                unican_writew(u,(__u16*)chipext->asyncTxBufPtr);
 
-               if ( (chipext->asyncTxBufBase + chipext->asyncTxBufSize*16) <= 
+               if ( (chipext->asyncTxBufBase + chipext->asyncTxBufSize*16) <=
                                                (chipext->asyncTxBufPtr += 16) ) {
                        chipext->asyncTxBufPtr = chipext->asyncTxBufBase;
                }
@@ -566,9 +566,9 @@ void unican_irq_write_handler(struct canchip_t *chip, struct msgobj_t *obj)
                /* Free transmitted slot */
                canque_free_outslot(obj->qends, obj->tx_qedge, obj->tx_slot);
                obj->tx_slot=NULL;
-       
+
        }while(1);
-       
+
        return;
 
 }
@@ -601,7 +601,7 @@ void unican_irq_sync_activities(struct canchip_t *chip, struct msgobj_t *obj)
  * unican_irq_handler: - interrupt service routine
  * @irq: interrupt vector number, this value is system specific
  * @chip: pointer to chip state structure
- * 
+ *
  * Interrupt handler is activated when state of CAN controller chip changes,
  * there is message to be read or there is more space for new messages or
  * error occurs. The receive events results in reading of the message from
@@ -622,7 +622,7 @@ int unican_irq_handler(int irq, struct canchip_t *chip)
        }
 
        if (cl2_get_status(chipext, &status) == CL2_NO_REQUEST) {
-               /* Reenable interrupts generation, this has to be even there, 
+               /* Reenable interrupts generation, this has to be even there,
                 * because irq_accept disables interrupts
                 */
                cl2_gen_interrupt(chipext);
@@ -661,7 +661,7 @@ int unican_irq_handler(int irq, struct canchip_t *chip)
  * unican_irq_accept: - fast irq accept routine, blocks further interrupts
  * @irq: interrupt vector number, this value is system specific
  * @chip: pointer to chip state structure
- * 
+ *
  * This routine only accepts interrupt reception and stops further
  * incoming interrupts, but does not handle situation causing interrupt.
  * File: src/unican.c
@@ -678,7 +678,7 @@ int unican_irq_accept(int irq, struct canchip_t *chip)
 /*void unican_do_tx_timeout(unsigned long data)
 {
        struct msgobj_t *obj=(struct msgobj_t *)data;
-       
+
 }*/
 
 /**
@@ -728,7 +728,7 @@ int unican_request_io(struct candevice_t *candev)
                CANMSG("Unable to access I/O memory at: 0x%lx\n", candev->io_addr);
                can_release_mem_region(candev->io_addr,IO_RANGE);
                return -ENODEV;
-       
+
        }
        can_base_addr_fixup(candev, remap_addr);
        DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr, candev->io_addr + IO_RANGE - 1);
@@ -762,7 +762,7 @@ int unican_reset(struct candevice_t *candev)
        int i;
        struct canchip_t *chip = candev->chip[0];
        sCAN_CARD *chipext;
-       
+
 
        if(chip->chip_data == NULL) {
                chip->chip_data = can_checked_malloc(sizeof(sCAN_CARD));
@@ -774,9 +774,9 @@ int unican_reset(struct candevice_t *candev)
                        return -ENODEV;
                }
        }
-       
+
        chipext = (sCAN_CARD *)chip->chip_data;
-               
+
        i = 0;
        /* reset and test whether the card is present */
        do {
@@ -790,14 +790,14 @@ int unican_reset(struct candevice_t *candev)
                CANMSG("card check failed %d\n",ret);
                return -ENODEV;
        }
-       
+
        /* start card firmware */
        ret = cl2_start_firmware(chipext);
        if(ret != CL2_OK){
                CANMSG("cl2_start_firmware returned %d\n",ret);
                return -ENODEV;
        }
-       
+
         unican_delay(100);
 
        return 0;
@@ -810,7 +810,7 @@ int unican_reset(struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/unican.c
  */
-int unican_init_hw_data(struct candevice_t *candev) 
+int unican_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=0;
        candev->nr_82527_chips=0;
@@ -839,7 +839,7 @@ int unican_init_chip_data(struct candevice_t *candev, int chipnr)
        chip->int_bus_reg = 0x0;
        chip->max_objects = 1;
        chip->chip_base_addr=candev->dev_base_addr;
-                       
+
        CANMSG("initializing unican chip operations\n");
        chip->chipspecops->chip_config=unican_chip_config;
        chip->chipspecops->baud_rate=unican_baud_rate;
@@ -942,11 +942,11 @@ int unican_pci_request_io(struct candevice_t *candev)
                pci_release_regions(candev->sysdevptr.pcidev);
            #endif /*(LINUX_VERSION_CODE > KERNEL_VERSION(2,4,21))*/
                return -ENODEV;
-       
+
        }
        can_base_addr_fixup(candev, remap_addr);
        DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr, candev->io_addr + IO_RANGE - 1);
-       DEBUGMSG("VMA: dev_base_addr: 0x%lx chip_base_addr: 0x%lx\n", 
+       DEBUGMSG("VMA: dev_base_addr: 0x%lx chip_base_addr: 0x%lx\n",
                can_ioptr2ulong(candev->dev_base_addr),
                can_ioptr2ulong(candev->chip[0]->chip_base_addr));
 
@@ -980,7 +980,7 @@ int unican_pci_init_hw_data(struct candevice_t *candev)
                return -EIO;
        }
        candev->sysdevptr.pcidev=pcidev;
-       
+
        if(!(pci_resource_flags(pcidev,0)&IORESOURCE_MEM)){
                printk(KERN_CRIT "Unican PCI region 0 is not MEM\n");
                can_pci_dev_put(pcidev);
@@ -989,7 +989,7 @@ int unican_pci_init_hw_data(struct candevice_t *candev)
        candev->io_addr=pci_resource_start(pcidev,0);
        candev->res_addr=candev->io_addr;
        candev->dev_base_addr=NULL;
-       
+
        /*candev->flags |= CANDEV_PROGRAMMABLE_IRQ;*/
 
        candev->nr_82527_chips=0;

diff --git a/lincan/src/unican_vme.c b/lincan/src/unican_vme.c
index cbf78ca2d80af3ff5a3cde7166324f5b27f1d901..9dacfb4ed55e26436cb5a1b01c9a8daddf850ec3 100644 (file)
--- a/lincan/src/unican_vme.c
+++ b/lincan/src/unican_vme.c
@@ -50,7 +50,7 @@ int unican_vme_reset(struct candevice_t *candev)
        ret = unican_reset(candev);
 
        /* Setup VME interrupt vector */
-       if (ret == 0) 
+       if (ret == 0)
                unican_writew(chip->chip_irq, chip->chip_base_addr+CL2_VME_INT_VECTOR);
 
        return ret;
@@ -76,7 +76,7 @@ int unican_vme_init_chip_data(struct candevice_t *candev, int chipnr)
 }
 
 
-int unican_vme_init_hw_data(struct candevice_t *candev) 
+int unican_vme_init_hw_data(struct candevice_t *candev)
 {
        unican_init_hw_data(candev);
        candev->flags |= CANDEV_PROGRAMMABLE_IRQ;

diff --git a/lincan/src/virtual.c b/lincan/src/virtual.c
index de6c6f5769c935e0346a17a3b0afa80fa0326c14..eb8043f82c24af44ef1b17c2c16bf2a0e8ff104a 100644 (file)
--- a/lincan/src/virtual.c
+++ b/lincan/src/virtual.c
@@ -138,7 +138,7 @@ int virtual_pre_read_config(struct canchip_t *chip, struct msgobj_t *obj)
  * Return Value: negative value reports error.
  * File: src/virtual.c
  */
-int virtual_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj, 
+int virtual_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
                                                        struct canmsg_t *msg)
 {
        return 0;
@@ -155,7 +155,7 @@ int virtual_pre_write_config(struct canchip_t *chip, struct msgobj_t *obj,
  * Return Value: negative value reports error.
  * File: src/virtual.c
  */
-int virtual_send_msg(struct canchip_t *chip, struct msgobj_t *obj, 
+int virtual_send_msg(struct canchip_t *chip, struct msgobj_t *obj,
                                                        struct canmsg_t *msg)
 {
        return 0;
@@ -184,7 +184,7 @@ int virtual_check_tx_stat(struct canchip_t *chip)
  * Return Value: negative value reports error.
  * File: src/virtual.c
  */
-int virtual_set_btregs(struct canchip_t *chip, unsigned short btr0, 
+int virtual_set_btregs(struct canchip_t *chip, unsigned short btr0,
                                                        unsigned short btr1)
 {
        return 0;
@@ -321,7 +321,7 @@ void virtual_irq_write_handler(struct canchip_t *chip, struct msgobj_t *obj)
  *     The CAN driver uses this pointer to store relationship of interrupt
  *     to chip state structure - @struct canchip_t
  * @regs: system dependent value pointing to registers stored in exception frame
- * 
+ *
  * Interrupt handler is activated when state of CAN controller chip changes,
  * there is message to be read or there is more space for new messages or
  * error occurs. The receive events results in reading of the message from
@@ -342,20 +342,20 @@ void virtual_schedule_next(struct msgobj_t *obj)
        can_preempt_disable();
 
        can_msgobj_set_fl(obj,TX_REQUEST);
-       
+
        while(!can_msgobj_test_and_set_fl(obj,TX_LOCK)){
 
                can_msgobj_clear_fl(obj,TX_REQUEST);
-               
+
                cmd=canque_test_outslot(obj->qends, &obj->tx_qedge, &obj->tx_slot);
                if(cmd>=0) {
                        mod_timer(&obj->tx_timeout,
                                jiffies+virtual_bus_latency(obj));
                        DEBUGMSG("virtual: scheduled delivery\n");
 
-               } else          
+               } else
                        can_msgobj_clear_fl(obj,TX_LOCK);
-               
+
                if(!can_msgobj_test_fl(obj,TX_REQUEST)) break;
                DEBUGMSG("TX looping in virtual_schedule_next\n");
        }
@@ -367,7 +367,7 @@ void virtual_schedule_next(struct msgobj_t *obj)
 void virtual_do_tx_timeout(unsigned long data)
 {
        struct msgobj_t *obj=(struct msgobj_t *)data;
-       
+
        if(obj->tx_slot) {
                /* fill CAN message timestamp */
                can_filltimestamp(&obj->tx_slot->msg.timestamp);
@@ -398,7 +398,7 @@ void virtual_do_tx_timeout(unsigned long data)
 int virtual_wakeup_tx(struct canchip_t *chip, struct msgobj_t *obj)
 {
        /* can_msgobj_set_fl(obj,TX_REQUEST); */
-       
+
        struct canque_edge_t *qedge;
        struct canque_slot_t *slot;
        int cmd;
@@ -413,7 +413,7 @@ int virtual_wakeup_tx(struct canchip_t *chip, struct msgobj_t *obj)
                        if(cmd==0) {
                                /* fill CAN message timestamp */
                                can_filltimestamp(&slot->msg.timestamp);
-                               
+
                                canque_filter_msg2edges(obj->qends, &slot->msg);
                                DEBUGMSG("virtual: direct delivery\n");
                        }
@@ -475,7 +475,7 @@ int virtual_reset(struct candevice_t *candev)
  * Return Value: The function always returns zero
  * File: src/virtual.c
  */
-int virtual_init_hw_data(struct candevice_t *candev) 
+int virtual_init_hw_data(struct candevice_t *candev)
 {
        candev->res_addr=0;
        candev->nr_82527_chips=0;

diff --git a/lincan/src/write.c b/lincan/src/write.c
index 8a50bd34c5c8905d0c87072be2ca74ba9b040ed4..d2f05d04a7144f6b370f4e0526fbac3194ee71ea 100644 (file)
--- a/lincan/src/write.c
+++ b/lincan/src/write.c
@@ -66,7 +66,7 @@ ssize_t can_write(struct file *file, const char *buffer, size_t length, loff_t *
                CANMSG("The number of bytes requested to be written is not a multiple of\n");
                CANMSG("'sizeof(struct canmsg_t)', currently this is not allowed.\n");
                return -1;
-       } 
+       }
 
        /* Initialize hardware pointers */
        obj = canuser->msgobj;
@@ -88,7 +88,7 @@ ssize_t can_write(struct file *file, const char *buffer, size_t length, loff_t *
        /* If the output buffer is full, return immediately in case O_NONBLOCK
         * has been specified or loop until space becomes available.
         */
-       if ((ret=canque_get_inslot4id(qends, &qedge, &slot, 
+       if ((ret=canque_get_inslot4id(qends, &qedge, &slot,
                        0, msg_buff.id, 0))<0){
                DEBUGMSG("Buffer is full\n");
                if(ret < -1)
@@ -97,7 +97,7 @@ ssize_t can_write(struct file *file, const char *buffer, size_t length, loff_t *
                if (file->f_flags & O_NONBLOCK)
                        return -EAGAIN;
 
-               ret=canque_get_inslot4id_wait_kern(qends, &qedge, &slot, 
+               ret=canque_get_inslot4id_wait_kern(qends, &qedge, &slot,
                                                0, msg_buff.id, 0);
                if(ret<0) {
                        if (signal_pending(current))
@@ -111,7 +111,7 @@ ssize_t can_write(struct file *file, const char *buffer, size_t length, loff_t *
        buffer += sizeof(struct canmsg_t);
        bytes_to_copy = length-sizeof(struct canmsg_t);
 
-       /* 
+       /*
         * Try to send more messages
         */
        while (bytes_to_copy >= sizeof(struct canmsg_t)) {
@@ -125,7 +125,7 @@ ssize_t can_write(struct file *file, const char *buffer, size_t length, loff_t *
                /* has been dependent on "extended" option */
 
                /* Get slot */
-               if(canque_get_inslot4id(qends, &qedge, &slot, 
+               if(canque_get_inslot4id(qends, &qedge, &slot,
                        0, msg_buff.id, 0) < 0) break;
                slot->msg=msg_buff;
                canque_put_inslot(qends, qedge, slot);
@@ -136,4 +136,4 @@ ssize_t can_write(struct file *file, const char *buffer, size_t length, loff_t *
                canque_sync_wait_kern(qends, qedge);
        }
        return length-bytes_to_copy;
-}      
+}

diff --git a/lincan/src/write_rtl.c b/lincan/src/write_rtl.c
index ce54cb5b1a5f51b61ccfb45d66a88a5470389a58..1b8e869f2a8fac7d6550a24369e726bbaec6758b 100644 (file)
--- a/lincan/src/write_rtl.c
+++ b/lincan/src/write_rtl.c
@@ -80,7 +80,7 @@ ssize_t can_write_rtl_posix(struct rtl_file *fptr, const char *buffer,
        /* If the output buffer is full, return immediately in case O_NONBLOCK
         * has been specified or loop until space becomes available.
         */
-       if ((ret=canque_get_inslot4id(qends, &qedge, &slot, 
+       if ((ret=canque_get_inslot4id(qends, &qedge, &slot,
                        0, msg_buff->id, 0))<0){
                DEBUGMSG("Buffer is full\n");
                if(ret < -1)
@@ -89,11 +89,11 @@ ssize_t can_write_rtl_posix(struct rtl_file *fptr, const char *buffer,
                if (fptr->f_flags & O_NONBLOCK)
                        return -EAGAIN;
 
-               ret=canque_get_inslot4id_wait_rtl(qends, &qedge, &slot, 
+               ret=canque_get_inslot4id_wait_rtl(qends, &qedge, &slot,
                                                0, msg_buff->id, 0);
                if (ret == -1)
                        return -EINTR;
-               
+
                if(ret<0) {
                        return -EIO;
                }
@@ -103,7 +103,7 @@ ssize_t can_write_rtl_posix(struct rtl_file *fptr, const char *buffer,
        canque_put_inslot(qends, qedge, slot);
        bytes_to_copy = length-sizeof(struct canmsg_t);
 
-       /* 
+       /*
         * Try to send more messages
         */
        while (bytes_to_copy >= sizeof(struct canmsg_t)) {
@@ -115,7 +115,7 @@ ssize_t can_write_rtl_posix(struct rtl_file *fptr, const char *buffer,
                /* has been dependent on "extended" option */
 
                /* Get slot */
-               if(canque_get_inslot4id(qends, &qedge, &slot, 
+               if(canque_get_inslot4id(qends, &qedge, &slot,
                        0, msg_buff->id, 0) < 0) break;
                slot->msg=*(msg_buff++);
                slot->msg.flags=msg_flags;
@@ -126,6 +126,6 @@ ssize_t can_write_rtl_posix(struct rtl_file *fptr, const char *buffer,
                canque_sync_wait_rtl(qends, qedge);
        }
        return length-bytes_to_copy;
-}      
+}
 
 #endif /*CAN_WITH_RTL*/