3 # This file describes the settings to be used by the documentation system
4 # doxygen (www.doxygen.org) for a project
6 # All text after a hash (#) is considered a comment and will be ignored
8 # TAG = value [value, ...]
9 # For lists items can also be appended using:
10 # TAG += value [value, ...]
11 # Values that contain spaces should be placed between quotes (" ")
13 #---------------------------------------------------------------------------
14 # Project related configuration options
15 #---------------------------------------------------------------------------
17 # This tag specifies the encoding used for all characters in the config file
18 # that follow. The default is UTF-8 which is also the encoding used for all
19 # text before the first occurrence of this tag. Doxygen uses libiconv (or the
20 # iconv built into libc) for the transcoding. See
21 # http://www.gnu.org/software/libiconv for the list of possible encodings.
23 DOXYFILE_ENCODING = UTF-8
25 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26 # by quotes) that should identify the project.
28 PROJECT_NAME = DCE-Eurobot
30 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
31 # This could be handy for archiving the generated documentation or
32 # if some version control system is used.
36 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37 # base path where the generated documentation will be put.
38 # If a relative path is entered, it will be relative to the location
39 # where doxygen was started. If left blank the current directory will be used.
41 OUTPUT_DIRECTORY = doc
43 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44 # 4096 sub-directories (in 2 levels) under the output directory of each output
45 # format and will distribute the generated files over these directories.
46 # Enabling this option can be useful when feeding doxygen a huge amount of
47 # source files, where putting all generated files in the same directory would
48 # otherwise cause performance problems for the file system.
52 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
53 # documentation generated by doxygen is written. Doxygen will use this
54 # information to generate all constant output in the proper language.
55 # The default language is English, other supported languages are:
56 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57 # Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek,
58 # Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages),
59 # Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish,
60 # Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish,
63 OUTPUT_LANGUAGE = English
65 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
66 # include brief member descriptions after the members that are listed in
67 # the file and class documentation (similar to JavaDoc).
68 # Set to NO to disable this.
70 BRIEF_MEMBER_DESC = YES
72 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
73 # the brief description of a member or function before the detailed description.
74 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
75 # brief descriptions will be completely suppressed.
79 # This tag implements a quasi-intelligent brief description abbreviator
80 # that is used to form the text in various listings. Each string
81 # in this list, if found as the leading text of the brief description, will be
82 # stripped from the text and the result after processing the whole list, is
83 # used as the annotated text. Otherwise, the brief description is used as-is.
84 # If left blank, the following values are used ("$name" is automatically
85 # replaced with the name of the entity): "The $name class" "The $name widget"
86 # "The $name file" "is" "provides" "specifies" "contains"
87 # "represents" "a" "an" "the"
91 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
92 # Doxygen will generate a detailed section even if there is only a brief
95 ALWAYS_DETAILED_SEC = NO
97 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
98 # inherited members of a class in the documentation of that class as if those
99 # members were ordinary class members. Constructors, destructors and assignment
100 # operators of the base classes will not be shown.
102 INLINE_INHERITED_MEMB = NO
104 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
105 # path before files name in the file list and in the header files. If set
106 # to NO the shortest path that makes the file name unique will be used.
108 FULL_PATH_NAMES = YES
110 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
111 # can be used to strip a user-defined part of the path. Stripping is
112 # only done if one of the specified strings matches the left-hand part of
113 # the path. The tag can be used to show relative paths in the file list.
114 # If left blank the directory from which doxygen is run is used as the
119 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
120 # the path mentioned in the documentation of a class, which tells
121 # the reader which header file to include in order to use a class.
122 # If left blank only the name of the header file containing the class
123 # definition is used. Otherwise one should specify the include paths that
124 # are normally passed to the compiler using the -I flag.
126 STRIP_FROM_INC_PATH =
128 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
129 # (but less readable) file names. This can be useful is your file systems
130 # doesn't support long names like on DOS, Mac, or CD-ROM.
134 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
135 # will interpret the first line (until the first dot) of a JavaDoc-style
136 # comment as the brief description. If set to NO, the JavaDoc
137 # comments will behave just like regular Qt-style comments
138 # (thus requiring an explicit @brief command for a brief description.)
140 JAVADOC_AUTOBRIEF = YES
142 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
143 # interpret the first line (until the first dot) of a Qt-style
144 # comment as the brief description. If set to NO, the comments
145 # will behave just like regular Qt-style comments (thus requiring
146 # an explicit \brief command for a brief description.)
150 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
151 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
152 # comments) as a brief description. This used to be the default behaviour.
153 # The new default is to treat a multi-line C++ comment block as a detailed
154 # description. Set this tag to YES if you prefer the old behaviour instead.
156 MULTILINE_CPP_IS_BRIEF = NO
158 # If the DETAILS_AT_TOP tag is set to YES then Doxygen
159 # will output the detailed description near the top, like JavaDoc.
160 # If set to NO, the detailed description appears after the member
165 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
166 # member inherits the documentation from any documented member that it
171 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
172 # a new page for each member. If set to NO, the documentation of a member will
173 # be part of the file/class/namespace that contains it.
175 SEPARATE_MEMBER_PAGES = NO
177 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
178 # Doxygen uses this value to replace tabs by spaces in code fragments.
182 # This tag can be used to specify a number of aliases that acts
183 # as commands in the documentation. An alias has the form "name=value".
184 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
185 # put the command \sideeffect (or @sideeffect) in the documentation, which
186 # will result in a user-defined paragraph with heading "Side Effects:".
187 # You can put \n's in the value part of an alias to insert newlines.
191 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
192 # sources only. Doxygen will then generate output that is more tailored for C.
193 # For instance, some of the names that are used will be different. The list
194 # of all members will be omitted, etc.
196 OPTIMIZE_OUTPUT_FOR_C = NO
198 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
199 # sources only. Doxygen will then generate output that is more tailored for
200 # Java. For instance, namespaces will be presented as packages, qualified
201 # scopes will look different, etc.
203 OPTIMIZE_OUTPUT_JAVA = NO
205 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
206 # sources only. Doxygen will then generate output that is more tailored for
209 OPTIMIZE_FOR_FORTRAN = NO
211 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
212 # sources. Doxygen will then generate output that is tailored for
215 OPTIMIZE_OUTPUT_VHDL = NO
217 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
218 # to include (a tag file for) the STL sources as input, then you should
219 # set this tag to YES in order to let doxygen match functions declarations and
220 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
221 # func(std::string) {}). This also make the inheritance and collaboration
222 # diagrams that involve STL classes more complete and accurate.
224 BUILTIN_STL_SUPPORT = YES
226 # If you use Microsoft's C++/CLI language, you should set this option to YES to
227 # enable parsing support.
231 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
232 # Doxygen will parse them like normal C++ but will assume all classes use public
233 # instead of private inheritance when no explicit protection keyword is present.
237 # For Microsoft's IDL there are propget and propput attributes to indicate getter
238 # and setter methods for a property. Setting this option to YES (the default)
239 # will make doxygen to replace the get and set methods by a property in the
240 # documentation. This will only work if the methods are indeed getting or
241 # setting a simple type. If this is not the case, or you want to show the
242 # methods anyway, you should set this option to NO.
244 IDL_PROPERTY_SUPPORT = YES
246 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
247 # tag is set to YES, then doxygen will reuse the documentation of the first
248 # member in the group (if any) for the other members of the group. By default
249 # all members of a group must be documented explicitly.
251 DISTRIBUTE_GROUP_DOC = YES
253 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
254 # the same type (for instance a group of public functions) to be put as a
255 # subgroup of that type (e.g. under the Public Functions section). Set it to
256 # NO to prevent subgrouping. Alternatively, this can be done per class using
257 # the \nosubgrouping command.
261 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
262 # is documented as struct, union, or enum with the name of the typedef. So
263 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
264 # with name TypeT. When disabled the typedef will appear as a member of a file,
265 # namespace, or class. And the struct will be named TypeS. This can typically
266 # be useful for C code in case the coding convention dictates that all compound
267 # types are typedef'ed and only the typedef is referenced, never the tag name.
269 TYPEDEF_HIDES_STRUCT = NO
271 #---------------------------------------------------------------------------
272 # Build related configuration options
273 #---------------------------------------------------------------------------
275 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
276 # documentation are documented, even if no documentation was available.
277 # Private class members and static file members will be hidden unless
278 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
282 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
283 # will be included in the documentation.
287 # If the EXTRACT_STATIC tag is set to YES all static members of a file
288 # will be included in the documentation.
292 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
293 # defined locally in source files will be included in the documentation.
294 # If set to NO only classes defined in header files are included.
296 EXTRACT_LOCAL_CLASSES = YES
298 # This flag is only useful for Objective-C code. When set to YES local
299 # methods, which are defined in the implementation section but not in
300 # the interface are included in the documentation.
301 # If set to NO (the default) only methods in the interface are included.
303 EXTRACT_LOCAL_METHODS = NO
305 # If this flag is set to YES, the members of anonymous namespaces will be
306 # extracted and appear in the documentation as a namespace called
307 # 'anonymous_namespace{file}', where file will be replaced with the base
308 # name of the file that contains the anonymous namespace. By default
309 # anonymous namespace are hidden.
311 EXTRACT_ANON_NSPACES = YES
313 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
314 # undocumented members of documented classes, files or namespaces.
315 # If set to NO (the default) these members will be included in the
316 # various overviews, but no documentation section is generated.
317 # This option has no effect if EXTRACT_ALL is enabled.
319 HIDE_UNDOC_MEMBERS = YES
321 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
322 # undocumented classes that are normally visible in the class hierarchy.
323 # If set to NO (the default) these classes will be included in the various
324 # overviews. This option has no effect if EXTRACT_ALL is enabled.
326 HIDE_UNDOC_CLASSES = YES
328 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
329 # friend (class|struct|union) declarations.
330 # If set to NO (the default) these declarations will be included in the
333 HIDE_FRIEND_COMPOUNDS = NO
335 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
336 # documentation blocks found inside the body of a function.
337 # If set to NO (the default) these blocks will be appended to the
338 # function's detailed documentation block.
340 HIDE_IN_BODY_DOCS = NO
342 # The INTERNAL_DOCS tag determines if documentation
343 # that is typed after a \internal command is included. If the tag is set
344 # to NO (the default) then the documentation will be excluded.
345 # Set it to YES to include the internal documentation.
349 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
350 # file names in lower-case letters. If set to YES upper-case letters are also
351 # allowed. This is useful if you have classes or files whose names only differ
352 # in case and if your file system supports case sensitive file names. Windows
353 # and Mac users are advised to set this option to NO.
355 CASE_SENSE_NAMES = YES
357 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
358 # will show members with their full class and namespace scopes in the
359 # documentation. If set to YES the scope will be hidden.
361 HIDE_SCOPE_NAMES = NO
363 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
364 # will put a list of the files that are included by a file in the documentation
367 SHOW_INCLUDE_FILES = YES
369 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
370 # is inserted in the documentation for inline members.
374 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
375 # will sort the (detailed) documentation of file and class members
376 # alphabetically by member name. If set to NO the members will appear in
379 SORT_MEMBER_DOCS = YES
381 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
382 # brief documentation of file, namespace and class members alphabetically
383 # by member name. If set to NO (the default) the members will appear in
388 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
389 # hierarchy of group names into alphabetical order. If set to NO (the default)
390 # the group names will appear in their defined order.
392 SORT_GROUP_NAMES = NO
394 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
395 # sorted by fully-qualified names, including namespaces. If set to
396 # NO (the default), the class list will be sorted only by class name,
397 # not including the namespace part.
398 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
399 # Note: This option applies only to the class list, not to the
402 SORT_BY_SCOPE_NAME = NO
404 # The GENERATE_TODOLIST tag can be used to enable (YES) or
405 # disable (NO) the todo list. This list is created by putting \todo
406 # commands in the documentation.
408 GENERATE_TODOLIST = YES
410 # The GENERATE_TESTLIST tag can be used to enable (YES) or
411 # disable (NO) the test list. This list is created by putting \test
412 # commands in the documentation.
414 GENERATE_TESTLIST = YES
416 # The GENERATE_BUGLIST tag can be used to enable (YES) or
417 # disable (NO) the bug list. This list is created by putting \bug
418 # commands in the documentation.
420 GENERATE_BUGLIST = YES
422 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
423 # disable (NO) the deprecated list. This list is created by putting
424 # \deprecated commands in the documentation.
426 GENERATE_DEPRECATEDLIST= YES
428 # The ENABLED_SECTIONS tag can be used to enable conditional
429 # documentation sections, marked by \if sectionname ... \endif.
433 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
434 # the initial value of a variable or define consists of for it to appear in
435 # the documentation. If the initializer consists of more lines than specified
436 # here it will be hidden. Use a value of 0 to hide initializers completely.
437 # The appearance of the initializer of individual variables and defines in the
438 # documentation can be controlled using \showinitializer or \hideinitializer
439 # command in the documentation regardless of this setting.
441 MAX_INITIALIZER_LINES = 30
443 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
444 # at the bottom of the documentation of classes and structs. If set to YES the
445 # list will mention the files that were used to generate the documentation.
447 SHOW_USED_FILES = YES
449 # If the sources in your project are distributed over multiple directories
450 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
451 # in the documentation. The default is NO.
453 SHOW_DIRECTORIES = YES
455 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
456 # This will remove the Files entry from the Quick Index and from the
457 # Folder Tree View (if specified). The default is YES.
461 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the
462 # Namespaces page. This will remove the Namespaces entry from the Quick Index
463 # and from the Folder Tree View (if specified). The default is YES.
465 SHOW_NAMESPACES = YES
467 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
468 # doxygen should invoke to get the current version for each file (typically from
469 # the version control system). Doxygen will invoke the program by executing (via
470 # popen()) the command <command> <input-file>, where <command> is the value of
471 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
472 # provided by doxygen. Whatever the program writes to standard output
473 # is used as the file version. See the manual for examples.
475 FILE_VERSION_FILTER =
477 #---------------------------------------------------------------------------
478 # configuration options related to warning and progress messages
479 #---------------------------------------------------------------------------
481 # The QUIET tag can be used to turn on/off the messages that are generated
482 # by doxygen. Possible values are YES and NO. If left blank NO is used.
486 # The WARNINGS tag can be used to turn on/off the warning messages that are
487 # generated by doxygen. Possible values are YES and NO. If left blank
492 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
493 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
494 # automatically be disabled.
496 WARN_IF_UNDOCUMENTED = NO
498 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
499 # potential errors in the documentation, such as not documenting some
500 # parameters in a documented function, or documenting parameters that
501 # don't exist or using markup commands wrongly.
503 WARN_IF_DOC_ERROR = YES
505 # This WARN_NO_PARAMDOC option can be abled to get warnings for
506 # functions that are documented, but have no documentation for their parameters
507 # or return value. If set to NO (the default) doxygen will only warn about
508 # wrong or incomplete parameter documentation, but not about the absence of
511 WARN_NO_PARAMDOC = YES
513 # The WARN_FORMAT tag determines the format of the warning messages that
514 # doxygen can produce. The string should contain the $file, $line, and $text
515 # tags, which will be replaced by the file and line number from which the
516 # warning originated and the warning text. Optionally the format may contain
517 # $version, which will be replaced by the version of the file (if it could
518 # be obtained via FILE_VERSION_FILTER)
520 WARN_FORMAT = "$file:$line: $text"
522 # The WARN_LOGFILE tag can be used to specify a file to which warning
523 # and error messages should be written. If left blank the output is written
528 #---------------------------------------------------------------------------
529 # configuration options related to the input files
530 #---------------------------------------------------------------------------
532 # The INPUT tag can be used to specify the files and/or directories that contain
533 # documented source files. You may enter file names like "myfile.cpp" or
534 # directories like "/usr/src/myproject". Separate the files or directories
539 # This tag can be used to specify the character encoding of the source files
540 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
541 # also the default input encoding. Doxygen uses libiconv (or the iconv built
542 # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
543 # the list of possible encodings.
545 INPUT_ENCODING = UTF-8
547 # If the value of the INPUT tag contains directories, you can use the
548 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
549 # and *.h) to filter out the source-files in the directories. If left
550 # blank the following patterns are tested:
551 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
552 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
556 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
557 # should be searched for input files as well. Possible values are YES and NO.
558 # If left blank NO is used.
562 # The EXCLUDE tag can be used to specify files and/or directories that should
563 # excluded from the INPUT source files. This way you can easily exclude a
564 # subdirectory from a directory tree whose root is specified with the INPUT tag.
566 EXCLUDE = _compiled \
579 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
580 # directories that are symbolic links (a Unix filesystem feature) are excluded
583 EXCLUDE_SYMLINKS = NO
585 # If the value of the INPUT tag contains directories, you can use the
586 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
587 # certain files from those directories. Note that the wildcards are matched
588 # against the file with absolute path, so to exclude all test directories
589 # for example use the pattern */test/*
593 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
594 # (namespaces, classes, functions, etc.) that should be excluded from the
595 # output. The symbol name can be a fully qualified name, a word, or if the
596 # wildcard * is used, a substring. Examples: ANamespace, AClass,
597 # AClass::ANamespace, ANamespace::*Test
601 # The EXAMPLE_PATH tag can be used to specify one or more files or
602 # directories that contain example code fragments that are included (see
603 # the \include command).
605 EXAMPLE_PATH = pathplan/test/ \
608 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
609 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
610 # and *.h) to filter out the source-files in the directories. If left
611 # blank all files are included.
615 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
616 # searched for input files to be used with the \include or \dontinclude
617 # commands irrespective of the value of the RECURSIVE tag.
618 # Possible values are YES and NO. If left blank NO is used.
620 EXAMPLE_RECURSIVE = NO
622 # The IMAGE_PATH tag can be used to specify one or more files or
623 # directories that contain image that are included in the documentation (see
624 # the \image command).
628 # The INPUT_FILTER tag can be used to specify a program that doxygen should
629 # invoke to filter for each input file. Doxygen will invoke the filter program
630 # by executing (via popen()) the command <filter> <input-file>, where <filter>
631 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
632 # input file. Doxygen will then use the output that the filter program writes
633 # to standard output. If FILTER_PATTERNS is specified, this tag will be
638 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
639 # basis. Doxygen will compare the file name with each pattern and apply the
640 # filter if there is a match. The filters are a list of the form:
641 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
642 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
643 # is applied to all files.
647 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
648 # INPUT_FILTER) will be used to filter the input files when producing source
649 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
651 FILTER_SOURCE_FILES = NO
653 #---------------------------------------------------------------------------
654 # configuration options related to source browsing
655 #---------------------------------------------------------------------------
657 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
658 # be generated. Documented entities will be cross-referenced with these sources.
659 # Note: To get rid of all source code in the generated output, make sure also
660 # VERBATIM_HEADERS is set to NO.
664 # Setting the INLINE_SOURCES tag to YES will include the body
665 # of functions and classes directly in the documentation.
669 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
670 # doxygen to hide any special comment blocks from generated source code
671 # fragments. Normal C and C++ comments will always remain visible.
673 STRIP_CODE_COMMENTS = YES
675 # If the REFERENCED_BY_RELATION tag is set to YES
676 # then for each documented function all documented
677 # functions referencing it will be listed.
679 REFERENCED_BY_RELATION = NO
681 # If the REFERENCES_RELATION tag is set to YES
682 # then for each documented function all documented entities
683 # called/used by that function will be listed.
685 REFERENCES_RELATION = NO
687 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
688 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
689 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
690 # link to the source code. Otherwise they will link to the documentstion.
692 REFERENCES_LINK_SOURCE = YES
694 # If the USE_HTAGS tag is set to YES then the references to source code
695 # will point to the HTML generated by the htags(1) tool instead of doxygen
696 # built-in source browser. The htags tool is part of GNU's global source
697 # tagging system (see http://www.gnu.org/software/global/global.html). You
698 # will need version 4.8.6 or higher.
702 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
703 # will generate a verbatim copy of the header file for each class for
704 # which an include is specified. Set to NO to disable this.
706 VERBATIM_HEADERS = NO
708 #---------------------------------------------------------------------------
709 # configuration options related to the alphabetical class index
710 #---------------------------------------------------------------------------
712 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
713 # of all compounds will be generated. Enable this if the project
714 # contains a lot of classes, structs, unions or interfaces.
716 ALPHABETICAL_INDEX = YES
718 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
719 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
720 # in which this list will be split (can be a number in the range [1..20])
722 COLS_IN_ALPHA_INDEX = 5
724 # In case all classes in a project start with a common prefix, all
725 # classes will be put under the same header in the alphabetical index.
726 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
727 # should be ignored while generating the index headers.
731 #---------------------------------------------------------------------------
732 # configuration options related to the HTML output
733 #---------------------------------------------------------------------------
735 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
736 # generate HTML output.
740 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
741 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
742 # put in front of it. If left blank `html' will be used as the default path.
746 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
747 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
748 # doxygen will generate files with .html extension.
750 HTML_FILE_EXTENSION = .html
752 # The HTML_HEADER tag can be used to specify a personal HTML header for
753 # each generated HTML page. If it is left blank doxygen will generate a
758 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
759 # each generated HTML page. If it is left blank doxygen will generate a
764 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
765 # style sheet that is used by each HTML page. It can be used to
766 # fine-tune the look of the HTML output. If the tag is left blank doxygen
767 # will generate a default style sheet. Note that doxygen will try to copy
768 # the style sheet file to the HTML output directory, so don't put your own
769 # stylesheet in the HTML output directory as well, or it will be erased!
773 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
774 # files or namespaces will be aligned in HTML using tables. If set to
775 # NO a bullet list will be used.
777 HTML_ALIGN_MEMBERS = YES
779 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
780 # will be generated that can be used as input for tools like the
781 # Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
782 # of the generated HTML documentation.
784 GENERATE_HTMLHELP = NO
786 # If the GENERATE_DOCSET tag is set to YES, additional index files
787 # will be generated that can be used as input for Apple's Xcode 3
788 # integrated development environment, introduced with OSX 10.5 (Leopard).
789 # To create a documentation set, doxygen will generate a Makefile in the
790 # HTML output directory. Running make will produce the docset in that
791 # directory and running "make install" will install the docset in
792 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
797 # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
798 # feed. A documentation feed provides an umbrella under which multiple
799 # documentation sets from a single provider (such as a company or product suite)
802 DOCSET_FEEDNAME = "Doxygen generated docs"
804 # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
805 # should uniquely identify the documentation set bundle. This should be a
806 # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
807 # will append .docset to the name.
809 DOCSET_BUNDLE_ID = org.doxygen.Project
811 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
812 # documentation will contain sections that can be hidden and shown after the
813 # page has loaded. For this to work a browser that supports
814 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
815 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
817 HTML_DYNAMIC_SECTIONS = NO
819 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
820 # be used to specify the file name of the resulting .chm file. You
821 # can add a path in front of the file if the result should not be
822 # written to the html output directory.
826 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
827 # be used to specify the location (absolute path including file name) of
828 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
829 # the HTML help compiler on the generated index.hhp.
833 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
834 # controls if a separate .chi index file is generated (YES) or that
835 # it should be included in the master .chm file (NO).
839 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
840 # is used to encode HtmlHelp index (hhk), content (hhc) and project file
845 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
846 # controls whether a binary table of contents is generated (YES) or a
847 # normal table of contents (NO) in the .chm file.
851 # The TOC_EXPAND flag can be set to YES to add extra items for group members
852 # to the contents of the HTML help documentation and to the tree view.
856 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
857 # top of each HTML page. The value NO (the default) enables the index and
858 # the value YES disables it.
862 # This tag can be used to set the number of enum values (range [1..20])
863 # that doxygen will group on one line in the generated HTML documentation.
865 ENUM_VALUES_PER_LINE = 4
867 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
868 # structure should be generated to display hierarchical information.
869 # If the tag value is set to FRAME, a side panel will be generated
870 # containing a tree-like index structure (just like the one that
871 # is generated for HTML Help). For this to work a browser that supports
872 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
873 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
874 # probably better off using the HTML help feature. Other possible values
875 # for this tag are: HIERARCHIES, which will generate the Groups, Directories,
876 # and Class Hiererachy pages using a tree view instead of an ordered list;
877 # ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which
878 # disables this behavior completely. For backwards compatibility with previous
879 # releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE
882 GENERATE_TREEVIEW = NONE
884 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
885 # used to set the initial width (in pixels) of the frame in which the tree
890 # Use this tag to change the font size of Latex formulas included
891 # as images in the HTML documentation. The default is 10. Note that
892 # when you change the font size after a successful doxygen run you need
893 # to manually remove any form_*.png images from the HTML output directory
894 # to force them to be regenerated.
896 FORMULA_FONTSIZE = 10
898 #---------------------------------------------------------------------------
899 # configuration options related to the LaTeX output
900 #---------------------------------------------------------------------------
902 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
903 # generate Latex output.
907 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
908 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
909 # put in front of it. If left blank `latex' will be used as the default path.
913 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
914 # invoked. If left blank `latex' will be used as the default command name.
916 LATEX_CMD_NAME = latex
918 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
919 # generate index for LaTeX. If left blank `makeindex' will be used as the
920 # default command name.
922 MAKEINDEX_CMD_NAME = makeindex
924 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
925 # LaTeX documents. This may be useful for small projects and may help to
926 # save some trees in general.
930 # The PAPER_TYPE tag can be used to set the paper type that is used
931 # by the printer. Possible values are: a4, a4wide, letter, legal and
932 # executive. If left blank a4wide will be used.
936 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
937 # packages that should be included in the LaTeX output.
939 EXTRA_PACKAGES = tikz
941 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
942 # the generated latex document. The header should contain everything until
943 # the first chapter. If it is left blank doxygen will generate a
944 # standard header. Notice: only use this tag if you know what you are doing!
948 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
949 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
950 # contain links (just like the HTML output) instead of page references
951 # This makes the output suitable for online browsing using a pdf viewer.
955 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
956 # plain latex in the generated Makefile. Set this option to YES to get a
957 # higher quality PDF documentation.
961 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
962 # command to the generated LaTeX files. This will instruct LaTeX to keep
963 # running if errors occur, instead of asking the user for help.
964 # This option is also used when generating formulas in HTML.
968 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
969 # include the index chapters (such as File Index, Compound Index, etc.)
972 LATEX_HIDE_INDICES = NO
974 #---------------------------------------------------------------------------
975 # configuration options related to the RTF output
976 #---------------------------------------------------------------------------
978 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
979 # The RTF output is optimized for Word 97 and may not look very pretty with
980 # other RTF readers or editors.
984 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
985 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
986 # put in front of it. If left blank `rtf' will be used as the default path.
990 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
991 # RTF documents. This may be useful for small projects and may help to
992 # save some trees in general.
996 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
997 # will contain hyperlink fields. The RTF file will
998 # contain links (just like the HTML output) instead of page references.
999 # This makes the output suitable for online browsing using WORD or other
1000 # programs which support those fields.
1001 # Note: wordpad (write) and others do not support links.
1005 # Load stylesheet definitions from file. Syntax is similar to doxygen's
1006 # config file, i.e. a series of assignments. You only have to provide
1007 # replacements, missing definitions are set to their default value.
1009 RTF_STYLESHEET_FILE =
1011 # Set optional variables used in the generation of an rtf document.
1012 # Syntax is similar to doxygen's config file.
1014 RTF_EXTENSIONS_FILE =
1016 #---------------------------------------------------------------------------
1017 # configuration options related to the man page output
1018 #---------------------------------------------------------------------------
1020 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1021 # generate man pages
1025 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
1026 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1027 # put in front of it. If left blank `man' will be used as the default path.
1031 # The MAN_EXTENSION tag determines the extension that is added to
1032 # the generated man pages (default is the subroutine's section .3)
1036 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1037 # then it will generate one additional man file for each entity
1038 # documented in the real man page(s). These additional files
1039 # only source the real man page, but without them the man command
1040 # would be unable to find the correct page. The default is NO.
1044 #---------------------------------------------------------------------------
1045 # configuration options related to the XML output
1046 #---------------------------------------------------------------------------
1048 # If the GENERATE_XML tag is set to YES Doxygen will
1049 # generate an XML file that captures the structure of
1050 # the code including all documentation.
1054 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
1055 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1056 # put in front of it. If left blank `xml' will be used as the default path.
1060 # The XML_SCHEMA tag can be used to specify an XML schema,
1061 # which can be used by a validating XML parser to check the
1062 # syntax of the XML files.
1066 # The XML_DTD tag can be used to specify an XML DTD,
1067 # which can be used by a validating XML parser to check the
1068 # syntax of the XML files.
1072 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1073 # dump the program listings (including syntax highlighting
1074 # and cross-referencing information) to the XML output. Note that
1075 # enabling this will significantly increase the size of the XML output.
1077 XML_PROGRAMLISTING = YES
1079 #---------------------------------------------------------------------------
1080 # configuration options for the AutoGen Definitions output
1081 #---------------------------------------------------------------------------
1083 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1084 # generate an AutoGen Definitions (see autogen.sf.net) file
1085 # that captures the structure of the code including all
1086 # documentation. Note that this feature is still experimental
1087 # and incomplete at the moment.
1089 GENERATE_AUTOGEN_DEF = NO
1091 #---------------------------------------------------------------------------
1092 # configuration options related to the Perl module output
1093 #---------------------------------------------------------------------------
1095 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
1096 # generate a Perl module file that captures the structure of
1097 # the code including all documentation. Note that this
1098 # feature is still experimental and incomplete at the
1101 GENERATE_PERLMOD = NO
1103 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1104 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
1105 # to generate PDF and DVI output from the Perl module output.
1109 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1110 # nicely formatted so it can be parsed by a human reader. This is useful
1111 # if you want to understand what is going on. On the other hand, if this
1112 # tag is set to NO the size of the Perl module output will be much smaller
1113 # and Perl will parse it just the same.
1115 PERLMOD_PRETTY = YES
1117 # The names of the make variables in the generated doxyrules.make file
1118 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1119 # This is useful so different doxyrules.make files included by the same
1120 # Makefile don't overwrite each other's variables.
1122 PERLMOD_MAKEVAR_PREFIX =
1124 #---------------------------------------------------------------------------
1125 # Configuration options related to the preprocessor
1126 #---------------------------------------------------------------------------
1128 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1129 # evaluate all C-preprocessor directives found in the sources and include
1132 ENABLE_PREPROCESSING = YES
1134 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1135 # names in the source code. If set to NO (the default) only conditional
1136 # compilation will be performed. Macro expansion can be done in a controlled
1137 # way by setting EXPAND_ONLY_PREDEF to YES.
1139 MACRO_EXPANSION = NO
1141 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1142 # then the macro expansion is limited to the macros specified with the
1143 # PREDEFINED and EXPAND_AS_DEFINED tags.
1145 EXPAND_ONLY_PREDEF = NO
1147 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1148 # in the INCLUDE_PATH (see below) will be search if a #include is found.
1150 SEARCH_INCLUDES = YES
1152 # The INCLUDE_PATH tag can be used to specify one or more directories that
1153 # contain include files that are not input files but should be processed by
1158 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1159 # patterns (like *.h and *.hpp) to filter out the header-files in the
1160 # directories. If left blank, the patterns specified with FILE_PATTERNS will
1163 INCLUDE_FILE_PATTERNS =
1165 # The PREDEFINED tag can be used to specify one or more macro names that
1166 # are defined before the preprocessor is started (similar to the -D option of
1167 # gcc). The argument of the tag is a list of macros of the form: name
1168 # or name=definition (no spaces). If the definition and the = are
1169 # omitted =1 is assumed. To prevent a macro definition from being
1170 # undefined via #undef or recursively expanded use the := operator
1171 # instead of the = operator.
1175 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1176 # this tag can be used to specify a list of macro names that should be expanded.
1177 # The macro definition that is found in the sources will be used.
1178 # Use the PREDEFINED tag if you want to use a different macro definition.
1182 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1183 # doxygen's preprocessor will remove all function-like macros that are alone
1184 # on a line, have an all uppercase name, and do not end with a semicolon. Such
1185 # function macros are typically used for boiler-plate code, and will confuse
1186 # the parser if not removed.
1188 SKIP_FUNCTION_MACROS = YES
1190 #---------------------------------------------------------------------------
1191 # Configuration::additions related to external references
1192 #---------------------------------------------------------------------------
1194 # The TAGFILES option can be used to specify one or more tagfiles.
1195 # Optionally an initial location of the external documentation
1196 # can be added for each tagfile. The format of a tag file without
1197 # this location is as follows:
1198 # TAGFILES = file1 file2 ...
1199 # Adding location for the tag files is done as follows:
1200 # TAGFILES = file1=loc1 "file2 = loc2" ...
1201 # where "loc1" and "loc2" can be relative or absolute paths or
1202 # URLs. If a location is present for each tag, the installdox tool
1203 # does not have to be run to correct the links.
1204 # Note that each tag file must have a unique name
1205 # (where the name does NOT include the path)
1206 # If a tag file is not located in the directory in which doxygen
1207 # is run, you must also specify the path to the tagfile here.
1211 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
1212 # a tag file that is based on the input files it reads.
1214 GENERATE_TAGFILE = doc/dce-eurobot.tag
1216 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
1217 # in the class index. If set to NO only the inherited external classes
1222 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1223 # in the modules index. If set to NO, only the current project's groups will
1226 EXTERNAL_GROUPS = YES
1228 # The PERL_PATH should be the absolute path and name of the perl script
1229 # interpreter (i.e. the result of `which perl').
1231 PERL_PATH = /usr/bin/perl
1233 #---------------------------------------------------------------------------
1234 # Configuration options related to the dot tool
1235 #---------------------------------------------------------------------------
1237 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1238 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1239 # or super classes. Setting the tag to NO turns the diagrams off. Note that
1240 # this option is superseded by the HAVE_DOT option below. This is only a
1241 # fallback. It is recommended to install and use dot, since it yields more
1246 # You can define message sequence charts within doxygen comments using the \msc
1247 # command. Doxygen will then run the mscgen tool (see
1248 # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1249 # documentation. The MSCGEN_PATH tag allows you to specify the directory where
1250 # the mscgen tool resides. If left empty the tool is assumed to be found in the
1251 # default search path.
1255 # If set to YES, the inheritance and collaboration graphs will hide
1256 # inheritance and usage relations if the target is undocumented
1257 # or is not a class.
1259 HIDE_UNDOC_RELATIONS = YES
1261 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1262 # available from the path. This tool is part of Graphviz, a graph visualization
1263 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1264 # have no effect if this option is set to NO (the default)
1268 # By default doxygen will write a font called FreeSans.ttf to the output
1269 # directory and reference it in all dot files that doxygen generates. This
1270 # font does not include all possible unicode characters however, so when you need
1271 # these (or just want a differently looking font) you can specify the font name
1272 # using DOT_FONTNAME. You need need to make sure dot is able to find the font,
1273 # which can be done by putting it in a standard location or by setting the
1274 # DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
1275 # containing the font.
1277 DOT_FONTNAME = FreeSans
1279 # By default doxygen will tell dot to use the output directory to look for the
1280 # FreeSans.ttf font (which doxygen will put there itself). If you specify a
1281 # different font using DOT_FONTNAME you can set the path where dot
1282 # can find it using this tag.
1286 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1287 # will generate a graph for each documented class showing the direct and
1288 # indirect inheritance relations. Setting this tag to YES will force the
1289 # the CLASS_DIAGRAMS tag to NO.
1293 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1294 # will generate a graph for each documented class showing the direct and
1295 # indirect implementation dependencies (inheritance, containment, and
1296 # class references variables) of the class with other documented classes.
1298 COLLABORATION_GRAPH = YES
1300 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1301 # will generate a graph for groups, showing the direct groups dependencies
1305 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1306 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1311 # If set to YES, the inheritance and collaboration graphs will show the
1312 # relations between templates and their instances.
1314 TEMPLATE_RELATIONS = NO
1316 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1317 # tags are set to YES then doxygen will generate a graph for each documented
1318 # file showing the direct and indirect include dependencies of the file with
1319 # other documented files.
1323 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1324 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1325 # documented header file showing the documented files that directly or
1326 # indirectly include this file.
1328 INCLUDED_BY_GRAPH = YES
1330 # If the CALL_GRAPH and HAVE_DOT options are set to YES then
1331 # doxygen will generate a call dependency graph for every global function
1332 # or class method. Note that enabling this option will significantly increase
1333 # the time of a run. So in most cases it will be better to enable call graphs
1334 # for selected functions only using the \callgraph command.
1338 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1339 # doxygen will generate a caller dependency graph for every global function
1340 # or class method. Note that enabling this option will significantly increase
1341 # the time of a run. So in most cases it will be better to enable caller
1342 # graphs for selected functions only using the \callergraph command.
1346 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1347 # will graphical hierarchy of all classes instead of a textual one.
1349 GRAPHICAL_HIERARCHY = YES
1351 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1352 # then doxygen will show the dependencies a directory has on other directories
1353 # in a graphical way. The dependency relations are determined by the #include
1354 # relations between the files in the directories.
1356 DIRECTORY_GRAPH = NO
1358 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1359 # generated by dot. Possible values are png, jpg, or gif
1360 # If left blank png will be used.
1362 DOT_IMAGE_FORMAT = png
1364 # The tag DOT_PATH can be used to specify the path where the dot tool can be
1365 # found. If left blank, it is assumed the dot tool can be found in the path.
1369 # The DOTFILE_DIRS tag can be used to specify one or more directories that
1370 # contain dot files that are included in the documentation (see the
1371 # \dotfile command).
1375 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1376 # nodes that will be shown in the graph. If the number of nodes in a graph
1377 # becomes larger than this value, doxygen will truncate the graph, which is
1378 # visualized by representing a node as a red box. Note that doxygen if the
1379 # number of direct children of the root node in a graph is already larger than
1380 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1381 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1383 DOT_GRAPH_MAX_NODES = 50
1385 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1386 # graphs generated by dot. A depth value of 3 means that only nodes reachable
1387 # from the root by following a path via at most 3 edges will be shown. Nodes
1388 # that lay further from the root node will be omitted. Note that setting this
1389 # option to 1 or 2 may greatly reduce the computation time needed for large
1390 # code bases. Also note that the size of a graph can be further restricted by
1391 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1393 MAX_DOT_GRAPH_DEPTH = 0
1395 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1396 # background. This is enabled by default, which results in a transparent
1397 # background. Warning: Depending on the platform used, enabling this option
1398 # may lead to badly anti-aliased labels on the edges of a graph (i.e. they
1399 # become hard to read).
1401 DOT_TRANSPARENT = YES
1403 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1404 # files in one run (i.e. multiple -o and -T options on the command line). This
1405 # makes dot run faster, but since only newer versions of dot (>1.8.10)
1406 # support this, this feature is disabled by default.
1408 DOT_MULTI_TARGETS = NO
1410 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1411 # generate a legend page explaining the meaning of the various boxes and
1412 # arrows in the dot generated graphs.
1414 GENERATE_LEGEND = YES
1416 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1417 # remove the intermediate dot files that are used to generate
1418 # the various graphs.
1422 #---------------------------------------------------------------------------
1423 # Configuration::additions related to the search engine
1424 #---------------------------------------------------------------------------
1426 # The SEARCHENGINE tag specifies whether or not a search engine should be
1427 # used. If set to NO the values of all tags below this one will be ignored.