[PSR] Hardware access in KN:E-2

[jiri hubacek]

Please, for obtaining IP address of board use `ifconfig` command.

Jiri

On 12/16/2016 07:18 PM, Marek L. wrote:
> Hope this copy paste work:
>
> U-Boot 1.3.2 (Oct  5 2008 - 00:08:36)
>
> CPU:   MPC5200B v2.2, Core v1.4 at 396 MHz
>        Bus 132 MHz, IPB 132 MHz, PCI 66 MHz
> Board: SHARK V1.1 (MIDAM)
>        on a Daughter board
> I2C:   85 kHz, ready
> DRAM:  128 MB
> FLASH: 64 MB
> In:    serial
> Out:   serial
> Err:   serial
> Net:   FEC ETHERNET
> POST i2c PASSED
> POST cpu PASSED
> IDE:   Bus 0: not available
>
> U-Boot compiled by Michal Hrouda - Energocentrum Plus s.r.o. ;-)
> Do not forget to setup MAC address (default 00:04:9f:00:27:5f) !
>
> Hit any key to stop autoboot:  0
> BOOTP broadcast 1
> DHCP client bound to address 192.168.202.51
> Using FEC ETHERNET device
> TFTP from server 192.168.202.4; our IP address is 192.168.202.51
> Filename 'vxworks/vxWorks-midam.bin'.
> Load address: 0x100000
> Loading: #################################################################
>      #################################################################
>      ##################
> done
> Bytes transferred = 2158256 (20eeb0 hex)
> ## Starting application at 0x00100000 ...
>
> Adding 7221 symbols for standalone.
>
>
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>       ]]]]]]]]]]]  ]]]]     ]]]]]]]]]]       ]]
> ]]]]         (R)
>  ]     ]]]]]]]]]  ]]]]]]     ]]]]]]]]       ]]
> ]]]]
>  ]]     ]]]]]]]  ]]]]]]]]     ]]]]]] ]     ]]
> ]]]]
>  ]]]     ]]]]] ]    ]]]  ]     ]]]] ]]]   ]]]]]]]]]  ]]]] ]] ]]]]  ]]
> ]]]]]
>  ]]]]     ]]]  ]]    ]  ]]]     ]] ]]]]] ]]]]]]   ]] ]]]]]]] ]]]] ]]
> ]]]]
>  ]]]]]     ]  ]]]]     ]]]]]      ]]]]]]]] ]]]]   ]] ]]]]    ]]]]]]]
> ]]]]
>  ]]]]]]      ]]]]]     ]]]]]]    ]  ]]]]]  ]]]]   ]] ]]]]    ]]]]]]]]
> ]]]]
>  ]]]]]]]    ]]]]]  ]    ]]]]]]  ]    ]]]   ]]]]   ]] ]]]]    ]]]]
> ]]]]    ]]]]
>  ]]]]]]]]  ]]]]]  ]]]    ]]]]]]]      ]     ]]]]]]]  ]]]]    ]]]]  ]]]]
> ]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]       Development System
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]]       VxWorks 6.9
>  ]]]]]]]]]]]]]]]]]]]]]]]]]]       KERNEL: WIND version 2.13
>  ]]]]]]]]]]]]]]]]]]]]]]]]]       Copyright Wind River Systems, Inc.,
> 1984-2016
>
>  CPU: Freescale Lite5200B - MPC5200B3.  Processor #0.
>  Memory Size: 0x7e50000 (~126Mb).  BSP version 6.9/0.
>  Created: Nov 29 2016 16:19:59
>  ED&R Policy Mode: Lab
>  WDB Comm Type: WDB_COMM_NETWORK
>  WDB: Ready.
>
>
> On Fri, Dec 16, 2016 at 7:12 PM, Michal Sojka <sojkam1 na fel.cvut.cz
> <mailto:sojkam1 na fel.cvut.cz>> wrote:
>
>     What do you see on serial line/usb? Does the board boot VxWorks?
>     0x100000 is the address where bootloader loads the vxworks image.
>
>
>
>     On 16. prosince 2016 19:04:20 CET, "Marek L." <laggersvk na gmail.com
>     <mailto:laggersvk na gmail.com>> wrote:
>
>         Good evening,
>
>         I am at the KN:E2. The left front computer has some problems
>         with the display.
>
>         I am now on right front computer and cant connect to target.
>         It says that there is some error on 0x100000 address. Some midam
>         inconsistency or something like that. Tried it on:
>         192.168.202.48
>         192.168.202.51
>
>         I also found out that you must probably need to use network mask
>         of 202 at KN:E2.
>
>         Where might be problem?
>
>         Thank You.
>
>         Marek Laszlo
>
>
>         On Fri, Dec 16, 2016 at 2:26 PM, Michal Sojka
>         <sojkam1 na fel.cvut.cz <mailto:sojkam1 na fel.cvut.cz>> wrote:
>
>             Dear students,
>
>             as we announced, we have made available 4 boards and motors
>             in room
>             KN:E-2 for you to work at any time. The room is located at
>             Karlovo
>             namesti and is accessible whenever the university is open, which
>             includes even weekends.
>
>             The keys from the locker are available at building E
>             reception desk. If
>             the whole room is locked, you can ask the reception guy to
>             open it.
>             Currently, there are only 4 Ethernet cables available in the
>             room - look
>             for yellow cables at the back sides of the room.
>
>             The boards will be available in the room today, until 8 PM.
>             Tomorrow,
>             Mr. Hubacek will bring them to H131. Starting from Sunday,
>             the 4 boards
>             will be again in E2. We will temporarily move them to H131
>             on Wednesdays
>             for exercises.
>
>             If you encounter any problems with the boards, motors etc.,
>             please let
>             us know immediately so that we can fix the problems quickly.
>
>             Best regards,
>             -Michal Sojka
>
>             _______________________________________________
>             PSR mailing list
>             PSR na rtime.felk.cvut.cz <mailto:PSR na rtime.felk.cvut.cz>
>             https://rtime.felk.cvut.cz/mailman/listinfo/psr
>             <https://rtime.felk.cvut.cz/mailman/listinfo/psr>
>
>
>
>     --
>     Odesláno z mého telefonu pomocí Kaiten Mail. Omluvte prosím mou
>     stručnost.
>
>
>
>
> _______________________________________________
> PSR mailing list
> PSR na rtime.felk.cvut.cz
> https://rtime.felk.cvut.cz/mailman/listinfo/psr
>