[PSR] Hardware access in KN:E-2

[Marek L.]

Hope this copy paste work:

U-Boot 1.3.2 (Oct  5 2008 - 00:08:36)

CPU:   MPC5200B v2.2, Core v1.4 at 396 MHz
       Bus 132 MHz, IPB 132 MHz, PCI 66 MHz
Board: SHARK V1.1 (MIDAM)
       on a Daughter board
I2C:   85 kHz, ready
DRAM:  128 MB
FLASH: 64 MB
In:    serial
Out:   serial
Err:   serial
Net:   FEC ETHERNET
POST i2c PASSED
POST cpu PASSED
IDE:   Bus 0: not available

U-Boot compiled by Michal Hrouda - Energocentrum Plus s.r.o. ;-)
Do not forget to setup MAC address (default 00:04:9f:00:27:5f) !

Hit any key to stop autoboot:  0
BOOTP broadcast 1
DHCP client bound to address 192.168.202.51
Using FEC ETHERNET device
TFTP from server 192.168.202.4; our IP address is 192.168.202.51
Filename 'vxworks/vxWorks-midam.bin'.
Load address: 0x100000
Loading: #################################################################
     #################################################################
     ##################
done
Bytes transferred = 2158256 (20eeb0 hex)
## Starting application at 0x00100000 ...

Adding 7221 symbols for standalone.


 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
      ]]]]]]]]]]]  ]]]]     ]]]]]]]]]]       ]]              ]]]]
(R)
 ]     ]]]]]]]]]  ]]]]]]     ]]]]]]]]       ]]
]]]]
 ]]     ]]]]]]]  ]]]]]]]]     ]]]]]] ]     ]]
]]]]
 ]]]     ]]]]] ]    ]]]  ]     ]]]] ]]]   ]]]]]]]]]  ]]]] ]] ]]]]  ]]
]]]]]
 ]]]]     ]]]  ]]    ]  ]]]     ]] ]]]]] ]]]]]]   ]] ]]]]]]] ]]]] ]]
]]]]
 ]]]]]     ]  ]]]]     ]]]]]      ]]]]]]]] ]]]]   ]] ]]]]    ]]]]]]]
]]]]
 ]]]]]]      ]]]]]     ]]]]]]    ]  ]]]]]  ]]]]   ]] ]]]]    ]]]]]]]]
]]]]
 ]]]]]]]    ]]]]]  ]    ]]]]]]  ]    ]]]   ]]]]   ]] ]]]]    ]]]] ]]]]
]]]]
 ]]]]]]]]  ]]]]]  ]]]    ]]]]]]]      ]     ]]]]]]]  ]]]]    ]]]]  ]]]]
]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]       Development System
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
 ]]]]]]]]]]]]]]]]]]]]]]]]]]]       VxWorks 6.9
 ]]]]]]]]]]]]]]]]]]]]]]]]]]       KERNEL: WIND version 2.13
 ]]]]]]]]]]]]]]]]]]]]]]]]]       Copyright Wind River Systems, Inc.,
1984-2016

 CPU: Freescale Lite5200B - MPC5200B3.  Processor #0.
 Memory Size: 0x7e50000 (~126Mb).  BSP version 6.9/0.
 Created: Nov 29 2016 16:19:59
 ED&R Policy Mode: Lab
 WDB Comm Type: WDB_COMM_NETWORK
 WDB: Ready.


On Fri, Dec 16, 2016 at 7:12 PM, Michal Sojka <sojkam1 na fel.cvut.cz> wrote:

> What do you see on serial line/usb? Does the board boot VxWorks? 0x100000
> is the address where bootloader loads the vxworks image.
>
>
> On 16. prosince 2016 19:04:20 CET, "Marek L." <laggersvk na gmail.com> wrote:
>>
>> Good evening,
>>
>> I am at the KN:E2. The left front computer has some problems with the
>> display.
>>
>> I am now on right front computer and cant connect to target.
>> It says that there is some error on 0x100000 address. Some midam
>> inconsistency or something like that. Tried it on:
>> 192.168.202.48
>> 192.168.202.51
>>
>> I also found out that you must probably need to use network mask of 202
>> at KN:E2.
>>
>> Where might be problem?
>>
>> Thank You.
>>
>> Marek Laszlo
>>
>>
>> On Fri, Dec 16, 2016 at 2:26 PM, Michal Sojka <sojkam1 na fel.cvut.cz>
>> wrote:
>>
>>> Dear students,
>>>
>>> as we announced, we have made available 4 boards and motors in room
>>> KN:E-2 for you to work at any time. The room is located at Karlovo
>>> namesti and is accessible whenever the university is open, which
>>> includes even weekends.
>>>
>>> The keys from the locker are available at building E reception desk. If
>>> the whole room is locked, you can ask the reception guy to open it.
>>> Currently, there are only 4 Ethernet cables available in the room - look
>>> for yellow cables at the back sides of the room.
>>>
>>> The boards will be available in the room today, until 8 PM. Tomorrow,
>>> Mr. Hubacek will bring them to H131. Starting from Sunday, the 4 boards
>>> will be again in E2. We will temporarily move them to H131 on Wednesdays
>>> for exercises.
>>>
>>> If you encounter any problems with the boards, motors etc., please let
>>> us know immediately so that we can fix the problems quickly.
>>>
>>> Best regards,
>>> -Michal Sojka
>>>
>>> _______________________________________________
>>> PSR mailing list
>>> PSR na rtime.felk.cvut.cz
>>> https://rtime.felk.cvut.cz/mailman/listinfo/psr
>>>
>>
>>
> --
> Odesláno z mého telefonu pomocí Kaiten Mail. Omluvte prosím mou stručnost.
>
------------- další část ---------------
HTML příloha byla odstraněna...
URL: <http://rtime.felk.cvut.cz/pipermail/psr/attachments/20161216/e990e4bd/attachment-0001.html>