Add device tree descriptions for Xilinx boards.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm015-dc1.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm016-dc2.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm017-dc3.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm018-dc4.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm019-dc5.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revB-loopback.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
--- /dev/null
+/*
+ * Clock specification for Xilinx ZynqMP
+ *
+ * (C) Copyright 2017, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/ {
+ fclk0: fclk0 {
+ status = "disabled";
+ compatible = "xlnx,fclk";
+ clocks = <&clkc 71>;
+ };
+
+ fclk1: fclk1 {
+ status = "disabled";
+ compatible = "xlnx,fclk";
+ clocks = <&clkc 72>;
+ };
+
+ fclk2: fclk2 {
+ status = "disabled";
+ compatible = "xlnx,fclk";
+ clocks = <&clkc 73>;
+ };
+
+ fclk3: fclk3 {
+ status = "disabled";
+ compatible = "xlnx,fclk";
+ clocks = <&clkc 74>;
+ };
+
+ pss_ref_clk: pss_ref_clk {
+ u-boot,dm-pre-reloc;
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33333333>;
+ };
+
+ video_clk: video_clk {
+ u-boot,dm-pre-reloc;
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+
+ pss_alt_ref_clk: pss_alt_ref_clk {
+ u-boot,dm-pre-reloc;
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ gt_crx_ref_clk: gt_crx_ref_clk {
+ u-boot,dm-pre-reloc;
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <108000000>;
+ };
+
+ aux_ref_clk: aux_ref_clk {
+ u-boot,dm-pre-reloc;
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+
+ clkc: clkc {
+ u-boot,dm-pre-reloc;
+ #clock-cells = <1>;
+ compatible = "xlnx,zynqmp-clkc";
+ clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>;
+ clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk", "aux_ref_clk", "gt_crx_ref_clk";
+ clock-output-names = "iopll", "rpll", "apll", "dpll",
+ "vpll", "iopll_to_fpd", "rpll_to_fpd",
+ "apll_to_lpd", "dpll_to_lpd", "vpll_to_lpd",
+ "acpu", "acpu_half", "dbf_fpd", "dbf_lpd",
+ "dbg_trace", "dbg_tstmp", "dp_video_ref",
+ "dp_audio_ref", "dp_stc_ref", "gdma_ref",
+ "dpdma_ref", "ddr_ref", "sata_ref", "pcie_ref",
+ "gpu_ref", "gpu_pp0_ref", "gpu_pp1_ref",
+ "topsw_main", "topsw_lsbus", "gtgref0_ref",
+ "lpd_switch", "lpd_lsbus", "usb0_bus_ref",
+ "usb1_bus_ref", "usb3_dual_ref", "usb0",
+ "usb1", "cpu_r5", "cpu_r5_core", "csu_spb",
+ "csu_pll", "pcap", "iou_switch", "gem_tsu_ref",
+ "gem_tsu", "gem0_ref", "gem1_ref", "gem2_ref",
+ "gem3_ref", "gem0_tx", "gem1_tx", "gem2_tx",
+ "gem3_tx", "qspi_ref", "sdio0_ref", "sdio1_ref",
+ "uart0_ref", "uart1_ref", "spi0_ref",
+ "spi1_ref", "nand_ref", "i2c0_ref", "i2c1_ref",
+ "can0_ref", "can1_ref", "can0", "can1",
+ "dll_ref", "adma_ref", "timestamp_ref",
+ "ams_ref", "pl0", "pl1", "pl2", "pl3", "wdt";
+ };
+
+ dp_aclk: dp_aclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-accuracy = <100>;
+ };
+};
+
+&can0 {
+ clocks = <&clkc 63>, <&clkc 31>;
+};
+
+&can1 {
+ clocks = <&clkc 64>, <&clkc 31>;
+};
+
+&cpu0 {
+ clocks = <&clkc 10>;
+};
+
+&fpd_dma_chan1 {
+ clocks = <&clkc 19>, <&clkc 31>;
+};
+
+&fpd_dma_chan2 {
+ clocks = <&clkc 19>, <&clkc 31>;
+};
+
+&fpd_dma_chan3 {
+ clocks = <&clkc 19>, <&clkc 31>;
+};
+
+&fpd_dma_chan4 {
+ clocks = <&clkc 19>, <&clkc 31>;
+};
+
+&fpd_dma_chan5 {
+ clocks = <&clkc 19>, <&clkc 31>;
+};
+
+&fpd_dma_chan6 {
+ clocks = <&clkc 19>, <&clkc 31>;
+};
+
+&fpd_dma_chan7 {
+ clocks = <&clkc 19>, <&clkc 31>;
+};
+
+&fpd_dma_chan8 {
+ clocks = <&clkc 19>, <&clkc 31>;
+};
+
+&gpu {
+ clocks = <&clkc 24>, <&clkc 25>, <&clkc 26>;
+};
+
+&lpd_dma_chan1 {
+ clocks = <&clkc 68>, <&clkc 31>;
+};
+
+&lpd_dma_chan2 {
+ clocks = <&clkc 68>, <&clkc 31>;
+};
+
+&lpd_dma_chan3 {
+ clocks = <&clkc 68>, <&clkc 31>;
+};
+
+&lpd_dma_chan4 {
+ clocks = <&clkc 68>, <&clkc 31>;
+};
+
+&lpd_dma_chan5 {
+ clocks = <&clkc 68>, <&clkc 31>;
+};
+
+&lpd_dma_chan6 {
+ clocks = <&clkc 68>, <&clkc 31>;
+};
+
+&lpd_dma_chan7 {
+ clocks = <&clkc 68>, <&clkc 31>;
+};
+
+&lpd_dma_chan8 {
+ clocks = <&clkc 68>, <&clkc 31>;
+};
+
+&nand0 {
+ clocks = <&clkc 60>, <&clkc 31>;
+};
+
+&gem0 {
+ clocks = <&clkc 45>, <&clkc 45>, <&clkc 49>;
+ clock-names = "pclk", "tx_clk", "hclk";
+};
+
+&gem1 {
+ clocks = <&clkc 46>, <&clkc 46>, <&clkc 50>;
+ clock-names = "pclk", "tx_clk", "hclk";
+};
+
+&gem2 {
+ clocks = <&clkc 47>, <&clkc 47>, <&clkc 51>;
+ clock-names = "pclk", "tx_clk", "hclk";
+};
+
+&gem3 {
+ clocks = <&clkc 31>, <&clkc 52>, <&clkc 48>, <&clkc 52>;
+ clock-names = "pclk", "hclk", "tx_clk", "rx_clk";
+};
+
+&gpio {
+ clocks = <&clkc 31>;
+};
+
+&i2c0 {
+ clocks = <&clkc 61>;
+};
+
+&i2c1 {
+ clocks = <&clkc 62>;
+};
+
+&pcie {
+ clocks = <&clkc 23>;
+};
+
+&qspi {
+ clocks = <&clkc 53>, <&clkc 31>;
+};
+
+&sata {
+ clocks = <&clkc 22>;
+};
+
+&sdhci0 {
+ clocks = <&clkc 54>, <&clkc 31>;
+};
+
+&sdhci1 {
+ clocks = <&clkc 55>, <&clkc 31>;
+};
+
+&spi0 {
+ clocks = <&clkc 58>, <&clkc 31>;
+};
+
+&spi1 {
+ clocks = <&clkc 59>, <&clkc 31>;
+};
+
+&uart0 {
+ clocks = <&clkc 56>, <&clkc 31>;
+};
+
+&uart1 {
+ clocks = <&clkc 57>, <&clkc 31>;
+};
+
+&usb0 {
+ clocks = <&clkc 32>, <&clkc 34>;
+};
+
+&usb1 {
+ clocks = <&clkc 33>, <&clkc 34>;
+};
+
+&watchdog0 {
+ clocks = <&clkc 75>;
+};
+
+&xilinx_ams {
+ clocks = <&clkc 70>;
+};
+
+&xilinx_drm {
+ clocks = <&clkc 16>;
+};
+
+&xlnx_dp {
+ clocks = <&dp_aclk>, <&clkc 17>;
+};
+
+&xlnx_dpdma {
+ clocks = <&clkc 20>;
+};
+
+&xlnx_dp_snd_codec0 {
+ clocks = <&clkc 17>;
+};
--- /dev/null
+/*
+ * Clock specification for Xilinx ZynqMP
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/ {
+ clk100: clk100 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ u-boot,dm-pre-reloc;
+ };
+
+ clk125: clk125 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clk200: clk200 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
+ clk250: clk250 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ };
+
+ clk300: clk300 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <300000000>;
+ };
+
+ clk600: clk600 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <600000000>;
+ };
+
+ dp_aclk: clock0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-accuracy = <100>;
+ };
+
+ dp_aud_clk: clock1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ clock-accuracy = <100>;
+ };
+
+ dpdma_clk: dpdma_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0x0>;
+ clock-frequency = <533000000>;
+ };
+
+ drm_clock: drm_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0x0>;
+ clock-frequency = <262750000>;
+ clock-accuracy = <0x64>;
+ };
+};
+
+&can0 {
+ clocks = <&clk100 &clk100>;
+};
+
+&can1 {
+ clocks = <&clk100 &clk100>;
+};
+
+&fpd_dma_chan1 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan2 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan3 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan4 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan5 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan6 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan7 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan8 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan1 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan2 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan3 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan4 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan5 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan6 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan7 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&lpd_dma_chan8 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&nand0 {
+ clocks = <&clk100 &clk100>;
+};
+
+&gem0 {
+ clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gem1 {
+ clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gem2 {
+ clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gem3 {
+ clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gpio {
+ clocks = <&clk100>;
+};
+
+&i2c0 {
+ clocks = <&clk100>;
+};
+
+&i2c1 {
+ clocks = <&clk100>;
+};
+
+&qspi {
+ clocks = <&clk300 &clk300>;
+};
+
+&sata {
+ clocks = <&clk250>;
+};
+
+&sdhci0 {
+ clocks = <&clk200 &clk200>;
+};
+
+&sdhci1 {
+ clocks = <&clk200 &clk200>;
+};
+
+&spi0 {
+ clocks = <&clk200 &clk200>;
+};
+
+&spi1 {
+ clocks = <&clk200 &clk200>;
+};
+
+&uart0 {
+ clocks = <&clk100 &clk100>;
+};
+
+&uart1 {
+ clocks = <&clk100 &clk100>;
+};
+
+&usb0 {
+ clocks = <&clk250>, <&clk250>;
+};
+
+&usb1 {
+ clocks = <&clk250>, <&clk250>;
+};
+
+&watchdog0 {
+ clocks = <&clk250>;
+};
+
+&xilinx_drm {
+ clocks = <&drm_clock>;
+};
+
+&xlnx_dp {
+ clocks = <&dp_aclk>, <&dp_aud_clk>;
+};
+
+&xlnx_dpdma {
+ clocks = <&dpdma_clk>;
+};
+
+&xlnx_dp_snd_codec0 {
+ clocks = <&dp_aud_clk>;
+};
* the License, or (at your option) any later version.
*/
-&amba {
+/ {
misc_clk: misc_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
+ u-boot,dm-pre-reloc;
};
i2c_clk: i2c_clk {
#clock-cells = <0>;
clock-frequency = <75000000>;
};
+
+ dp_aclk: clock0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-accuracy = <100>;
+ };
+
+ clk100: clk100 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ clk600: clk600 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <600000000>;
+ };
+
+ dp_aud_clk: clock1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <22579200>;
+ clock-accuracy = <100>;
+ };
};
&can0 {
clocks = <&misc_clk &misc_clk>;
};
+&can1 {
+ clocks = <&misc_clk &misc_clk>;
+};
+
+&fpd_dma_chan1 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan2 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan3 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan4 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan5 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan6 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan7 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan8 {
+ clocks = <&clk600>, <&clk100>;
+};
+
&gem0 {
clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
};
clocks = <&i2c_clk>;
};
+&nand0 {
+ clocks = <&misc_clk &misc_clk>;
+};
+
+&qspi {
+ clocks = <&misc_clk &misc_clk>;
+};
+
&sata {
clocks = <&sata_clk>;
};
&watchdog0 {
clocks= <&misc_clk>;
};
+
+&xilinx_drm {
+ clocks = <&misc_clk>;
+};
+
+&xlnx_dp {
+ clocks = <&dp_aclk>, <&dp_aud_clk>;
+};
+
+&xlnx_dp_snd_codec0 {
+ clocks = <&dp_aud_clk>;
+};
+
+&xlnx_dpdma {
+ clocks = <&misc_clk>;
+};
/dts-v1/;
-/include/ "zynqmp.dtsi"
-/include/ "zynqmp-ep108-clk.dtsi"
+#include "zynqmp.dtsi"
+#include "zynqmp-ep108-clk.dtsi"
/ {
model = "ZynqMP EP108";
aliases {
+ ethernet0 = &gem0;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
serial0 = &uart0;
+ spi0 = &qspi;
+ spi1 = &spi0;
+ spi2 = &spi1;
+ usb0 = &usb0;
+ usb1 = &usb1;
};
chosen {
+ bootargs = "earlycon";
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
status = "okay";
};
+&can1 {
+ status = "okay";
+};
+
&gem0 {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: phy@0{
+ phy0: phy@0 {
reg = <0>;
max-speed = <100>;
};
};
};
+&nand0 {
+ status = "okay";
+ arasan,has-mdma;
+
+ nand@0 {
+ reg = <0x0>;
+ #address-cells = <0x2>;
+ #size-cells = <0x1>;
+ partition@0 { /* for testing purpose */
+ label = "nand-fsbl-uboot";
+ reg = <0x0 0x0 0x400000>;
+ };
+ partition@1 { /* for testing purpose */
+ label = "nand-linux";
+ reg = <0x0 0x400000 0x1400000>;
+ };
+ partition@2 { /* for testing purpose */
+ label = "nand-device-tree";
+ reg = <0x0 0x1800000 0x400000>;
+ };
+ partition@3 { /* for testing purpose */
+ label = "nand-rootfs";
+ reg = <0x0 0x1c00000 0x1400000>;
+ };
+ partition@4 { /* for testing purpose */
+ label = "nand-bitstream";
+ reg = <0x0 0x3000000 0x400000>;
+ };
+ partition@5 { /* for testing purpose */
+ label = "nand-misc";
+ reg = <0x0 0x3400000 0xfcc00000>;
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ flash@0 {
+ compatible = "m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <10000000>;
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
&sata {
status = "okay";
ceva,broken-gen2;
+ /* SATA Phy OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+ ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+ ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+ ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+ ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+ ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
};
&sdhci0 {
status = "okay";
+ bus-width = <8>;
+ xlnx,mio_bank = <2>;
};
&sdhci1 {
status = "okay";
+ xlnx,mio_bank = <1>;
};
&spi0 {
spi-max-frequency = <50000000>;
reg = <0>;
- spi0_flash0@00000000 {
+ spi0_flash0@0 {
label = "spi0_flash0";
reg = <0x0 0x100000>;
};
spi-max-frequency = <50000000>;
reg = <0>;
- spi1_flash0@00000000 {
+ spi1_flash0@0 {
label = "spi1_flash0";
reg = <0x0 0x100000>;
};
&usb0 {
status = "okay";
+};
+
+&dwc3_0 {
+ status = "okay";
dr_mode = "peripheral";
maximum-speed = "high-speed";
};
&usb1 {
status = "okay";
+};
+
+&dwc3_1 {
+ status = "okay";
dr_mode = "host";
maximum-speed = "high-speed";
};
&watchdog0 {
status = "okay";
};
+
+&xlnx_dp {
+ xlnx,max-pclock-frequency = <200000>;
+};
+
+&xlnx_dpdma {
+ xlnx,axi-clock-freq = <200000000>;
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP ZC1232
+ *
+ * (C) Copyright 2017, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP ZC1232 RevA";
+ compatible = "xlnx,zynqmp-zc1232-revA", "xlnx,zynqmp-zc1232", "xlnx,zynqmp";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &dcc;
+ spi0 = &qspi;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+&dcc {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+ flash@0 {
+ compatible = "m25p80"; /* 32MB FIXME */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&sata {
+ status = "okay";
+ /* SATA OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&lane0 PHY_TYPE_SATA 0 0 125000000>, <&lane1 PHY_TYPE_SATA 1 1 125000000>;
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm015-dc1
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+ model = "ZynqMP zc1751-xm015-dc1 RevA";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ gpio0 = &gpio;
+ i2c0 = &i2c1;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem3 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem3_default>;
+ phy0: phy@0 {
+ reg = <0>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+
+ eeprom@55 {
+ compatible = "at,24c64"; /* 24AA64 */
+ reg = <0x55>;
+ };
+};
+
+&qspi {
+ status = "okay";
+ flash@0 {
+ compatible = "m25p80"; /* Micron MT25QU512ABB8ESF */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ /* SATA phy OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&lane3 PHY_TYPE_SATA 1 3 150000000>;
+};
+
+/* eMMC */
+&sdhci0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci0_default>;
+ bus-width = <8>;
+ xlnx,mio_bank = <0>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci1_default>;
+ xlnx,mio_bank = <1>;
+};
+
+&serdes {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+ phy-names = "usb3-phy";
+ phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>;
+};
+
+&xilinx_drm {
+ status = "okay";
+};
+
+&xlnx_dp {
+ status = "okay";
+ phy-names = "dp-phy0", "dp-phy1";
+ phys = <&lane1 PHY_TYPE_DP 0 0 27000000>,
+ <&lane0 PHY_TYPE_DP 1 1 27000000>;
+};
+
+&xlnx_dp_sub {
+ status = "okay";
+ xlnx,vid-clk-pl;
+};
+
+&xlnx_dp_snd_pcm0 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_card {
+ status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
+
+&pinctrl0 {
+ status = "okay";
+ pinctrl_i2c1_default: i2c1-default {
+ mux {
+ groups = "i2c1_9_grp";
+ function = "i2c1";
+ };
+
+ conf {
+ groups = "i2c1_9_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ mux {
+ groups = "gpio0_36_grp", "gpio0_37_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_36_grp", "gpio0_37_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_uart0_default: uart0-default {
+ mux {
+ groups = "uart0_8_grp";
+ function = "uart0";
+ };
+
+ conf {
+ groups = "uart0_8_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO34";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO35";
+ bias-disable;
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO52", "MIO53", "MIO55";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+ "MIO60", "MIO61", "MIO62", "MIO63";
+ bias-disable;
+ };
+ };
+
+ pinctrl_gem3_default: gem3-default {
+ mux {
+ function = "ethernet3";
+ groups = "ethernet3_0_grp";
+ };
+
+ conf {
+ groups = "ethernet3_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+ "MIO75";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+ "MIO69";
+ bias-disable;
+ low-power-enable;
+ };
+
+ mux-mdio {
+ function = "mdio3";
+ groups = "mdio3_0_grp";
+ };
+
+ conf-mdio {
+ groups = "mdio3_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_sdhci0_default: sdhci0-default {
+ mux {
+ groups = "sdio0_0_grp";
+ function = "sdio0";
+ };
+
+ conf {
+ groups = "sdio0_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "sdio0_0_cd_grp";
+ function = "sdio0_cd";
+ };
+
+ conf-cd {
+ groups = "sdio0_0_cd_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux-wp {
+ groups = "sdio0_0_wp_grp";
+ function = "sdio0_wp";
+ };
+
+ conf-wp {
+ groups = "sdio0_0_wp_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_sdhci1_default: sdhci1-default {
+ mux {
+ groups = "sdio1_0_grp";
+ function = "sdio1";
+ };
+
+ conf {
+ groups = "sdio1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "sdio1_0_cd_grp";
+ function = "sdio1_cd";
+ };
+
+ conf-cd {
+ groups = "sdio1_0_cd_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux-wp {
+ groups = "sdio1_0_wp_grp";
+ function = "sdio1_wp";
+ };
+
+ conf-wp {
+ groups = "sdio1_0_wp_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_gpio_default: gpio-default {
+ mux {
+ function = "gpio0";
+ groups = "gpio0_38_grp";
+ };
+
+ conf {
+ groups = "gpio0_38_grp";
+ bias-disable;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm016-dc2
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+ model = "ZynqMP zc1751-xm016-dc2 RevA";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ can0 = &can0;
+ can1 = &can1;
+ ethernet0 = &gem2;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ usb0 = &usb1;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+&can0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&can1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem2 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem2_default>;
+ phy0: phy@5 {
+ reg = <5>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ ti,rxctrl-strap-worka;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+
+ tca6416_u26: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* IRQ not connected */
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&nand0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand0_default>;
+ arasan,has-mdma;
+
+ nand@0 {
+ reg = <0x0>;
+ #address-cells = <0x2>;
+ #size-cells = <0x1>;
+
+ partition@0 { /* for testing purpose */
+ label = "nand-fsbl-uboot";
+ reg = <0x0 0x0 0x400000>;
+ };
+ partition@1 { /* for testing purpose */
+ label = "nand-linux";
+ reg = <0x0 0x400000 0x1400000>;
+ };
+ partition@2 { /* for testing purpose */
+ label = "nand-device-tree";
+ reg = <0x0 0x1800000 0x400000>;
+ };
+ partition@3 { /* for testing purpose */
+ label = "nand-rootfs";
+ reg = <0x0 0x1c00000 0x1400000>;
+ };
+ partition@4 { /* for testing purpose */
+ label = "nand-bitstream";
+ reg = <0x0 0x3000000 0x400000>;
+ };
+ partition@5 { /* for testing purpose */
+ label = "nand-misc";
+ reg = <0x0 0x3400000 0xfcc00000>;
+ };
+ };
+ nand@1 {
+ reg = <0x1>;
+ #address-cells = <0x2>;
+ #size-cells = <0x1>;
+
+ partition@0 { /* for testing purpose */
+ label = "nand1-fsbl-uboot";
+ reg = <0x0 0x0 0x400000>;
+ };
+ partition@1 { /* for testing purpose */
+ label = "nand1-linux";
+ reg = <0x0 0x400000 0x1400000>;
+ };
+ partition@2 { /* for testing purpose */
+ label = "nand1-device-tree";
+ reg = <0x0 0x1800000 0x400000>;
+ };
+ partition@3 { /* for testing purpose */
+ label = "nand1-rootfs";
+ reg = <0x0 0x1c00000 0x1400000>;
+ };
+ partition@4 { /* for testing purpose */
+ label = "nand1-bitstream";
+ reg = <0x0 0x3000000 0x400000>;
+ };
+ partition@5 { /* for testing purpose */
+ label = "nand1-misc";
+ reg = <0x0 0x3400000 0xfcc00000>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+
+ spi0_flash0: spi0_flash0@0 {
+ compatible = "m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ spi0_flash0@0 {
+ label = "spi0_flash0";
+ reg = <0x0 0x100000>;
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ spi1_flash0: spi1_flash0@0 {
+ compatible = "mtd_dataflash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+
+ spi1_flash0@0 {
+ label = "spi1_flash0";
+ reg = <0x0 0x84000>;
+ };
+ };
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_default>;
+};
+
+&dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&pinctrl0 {
+ status = "okay";
+ pinctrl_can0_default: can0-default {
+ mux {
+ function = "can0";
+ groups = "can0_9_grp";
+ };
+
+ conf {
+ groups = "can0_9_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO38";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO39";
+ bias-disable;
+ };
+ };
+
+ pinctrl_can1_default: can1-default {
+ mux {
+ function = "can1";
+ groups = "can1_8_grp";
+ };
+
+ conf {
+ groups = "can1_8_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO33";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO32";
+ bias-disable;
+ };
+ };
+
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_1_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_1_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ mux {
+ groups = "gpio0_6_grp", "gpio0_7_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_6_grp", "gpio0_7_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_uart0_default: uart0-default {
+ mux {
+ groups = "uart0_10_grp";
+ function = "uart0";
+ };
+
+ conf {
+ groups = "uart0_10_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO42";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO43";
+ bias-disable;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_10_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_10_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO41";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO40";
+ bias-disable;
+ };
+ };
+
+ pinctrl_usb1_default: usb1-default {
+ mux {
+ groups = "usb1_0_grp";
+ function = "usb1";
+ };
+
+ conf {
+ groups = "usb1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO64", "MIO65", "MIO67";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+ "MIO72", "MIO73", "MIO74", "MIO75";
+ bias-disable;
+ };
+ };
+
+ pinctrl_gem2_default: gem2-default {
+ mux {
+ function = "ethernet2";
+ groups = "ethernet2_0_grp";
+ };
+
+ conf {
+ groups = "ethernet2_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO58", "MIO59", "MIO60", "MIO61", "MIO62",
+ "MIO63";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO52", "MIO53", "MIO54", "MIO55", "MIO56",
+ "MIO57";
+ bias-disable;
+ low-power-enable;
+ };
+
+ mux-mdio {
+ function = "mdio2";
+ groups = "mdio2_0_grp";
+ };
+
+ conf-mdio {
+ groups = "mdio2_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_nand0_default: nand0-default {
+ mux {
+ groups = "nand0_0_grp";
+ function = "nand0";
+ };
+
+ conf {
+ groups = "nand0_0_grp";
+ bias-pull-up;
+ };
+
+ mux-ce {
+ groups = "nand0_0_ce_grp";
+ function = "nand0_ce";
+ };
+
+ conf-ce {
+ groups = "nand0_0_ce_grp";
+ bias-pull-up;
+ };
+
+ mux-rb {
+ groups = "nand0_0_rb_grp";
+ function = "nand0_rb";
+ };
+
+ conf-rb {
+ groups = "nand0_0_rb_grp";
+ bias-pull-up;
+ };
+
+ mux-dqs {
+ groups = "nand0_0_dqs_grp";
+ function = "nand0_dqs";
+ };
+
+ conf-dqs {
+ groups = "nand0_0_dqs_grp";
+ bias-pull-up;
+ };
+ };
+
+ pinctrl_spi0_default: spi0-default {
+ mux {
+ groups = "spi0_0_grp";
+ function = "spi0";
+ };
+
+ conf {
+ groups = "spi0_0_grp";
+ bias-disable;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux-cs {
+ groups = "spi0_0_ss0_grp", "spi0_0_ss1_grp",
+ "spi0_0_ss2_grp";
+ function = "spi0_ss";
+ };
+
+ conf-cs {
+ groups = "spi0_0_ss0_grp", "spi0_0_ss1_grp",
+ "spi0_0_ss2_grp";
+ bias-disable;
+ };
+ };
+
+ pinctrl_spi1_default: spi1-default {
+ mux {
+ groups = "spi1_3_grp";
+ function = "spi1";
+ };
+
+ conf {
+ groups = "spi1_3_grp";
+ bias-disable;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux-cs {
+ groups = "spi1_3_ss0_grp", "spi1_3_ss1_grp",
+ "spi1_3_ss2_grp";
+ function = "spi1_ss";
+ };
+
+ conf-cs {
+ groups = "spi1_3_ss0_grp", "spi1_3_ss1_grp",
+ "spi1_3_ss2_grp";
+ bias-disable;
+ };
+ };
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm017-dc3
+ *
+ * (C) Copyright 2016, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+ model = "ZynqMP zc1751-xm017-dc3 RevA";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem0;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@0 { /* VSC8211 */
+ reg = <0>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+/* just eeprom here */
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tca6416_u26: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* IRQ not connected */
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+/* eeprom24c02 and SE98A temp chip pca9306 */
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+/* MT29F64G08AECDBJ4-6 */
+&nand0 {
+ status = "okay";
+ arasan,has-mdma;
+ num-cs = <2>;
+
+ partition@0 { /* for testing purpose */
+ label = "nand-fsbl-uboot";
+ reg = <0x0 0x0 0x400000>;
+ };
+ partition@1 { /* for testing purpose */
+ label = "nand-linux";
+ reg = <0x0 0x400000 0x1400000>;
+ };
+ partition@2 { /* for testing purpose */
+ label = "nand-device-tree";
+ reg = <0x0 0x1800000 0x400000>;
+ };
+ partition@3 { /* for testing purpose */
+ label = "nand-rootfs";
+ reg = <0x0 0x1C00000 0x1400000>;
+ };
+ partition@4 { /* for testing purpose */
+ label = "nand-bitstream";
+ reg = <0x0 0x3000000 0x400000>;
+ };
+ partition@5 { /* for testing purpose */
+ label = "nand-misc";
+ reg = <0x0 0x3400000 0xFCC00000>;
+ };
+
+ partition@6 { /* for testing purpose */
+ label = "nand1-fsbl-uboot";
+ reg = <0x1 0x0 0x400000>;
+ };
+ partition@7 { /* for testing purpose */
+ label = "nand1-linux";
+ reg = <0x1 0x400000 0x1400000>;
+ };
+ partition@8 { /* for testing purpose */
+ label = "nand1-device-tree";
+ reg = <0x1 0x1800000 0x400000>;
+ };
+ partition@9 { /* for testing purpose */
+ label = "nand1-rootfs";
+ reg = <0x1 0x1C00000 0x1400000>;
+ };
+ partition@10 { /* for testing purpose */
+ label = "nand1-bitstream";
+ reg = <0x1 0x3000000 0x400000>;
+ };
+ partition@11 { /* for testing purpose */
+ label = "nand1-misc";
+ reg = <0x1 0x3400000 0xFCC00000>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ /* SATA phy OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+};
+
+&sdhci1 { /* emmc with some settings */
+ status = "okay";
+};
+
+/* main */
+&uart0 {
+ status = "okay";
+};
+
+/* DB9 */
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm018-dc4
+ *
+ * (C) Copyright 2015 - 2016, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+ model = "ZynqMP zc1751-xm018-dc4";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ can0 = &can0;
+ can1 = &can1;
+ ethernet0 = &gem0;
+ ethernet1 = &gem1;
+ ethernet2 = &gem2;
+ ethernet3 = &gem3;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &qspi;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&lpd_dma_chan1 {
+ status = "okay";
+};
+
+&lpd_dma_chan2 {
+ status = "okay";
+};
+
+&lpd_dma_chan3 {
+ status = "okay";
+};
+
+&lpd_dma_chan4 {
+ status = "okay";
+};
+
+&lpd_dma_chan5 {
+ status = "okay";
+};
+
+&lpd_dma_chan6 {
+ status = "okay";
+};
+
+&lpd_dma_chan7 {
+ status = "okay";
+};
+
+&lpd_dma_chan8 {
+ status = "okay";
+};
+
+&xlnx_dp {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy0>;
+ ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
+ reg = <0>;
+ };
+ ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
+ reg = <7>;
+ };
+ ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
+ reg = <3>;
+ };
+ ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
+ reg = <8>;
+ };
+};
+
+&gem1 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy7>;
+};
+
+&gem2 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy3>;
+};
+
+&gem3 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy8>;
+};
+
+&gpio {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+ flash@0 {
+ compatible = "m25p80"; /* 32MB */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&watchdog0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm019-dc5
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+ model = "ZynqMP zc1751-xm019-dc5 RevA";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem1;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci0;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem1 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem1_default>;
+ phy0: phy@0 {
+ reg = <0>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+/* FIXME: Add device */
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio 74 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio 75 GPIO_ACTIVE_HIGH>;
+};
+
+/* FIXME: Add device */
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio 77 GPIO_ACTIVE_HIGH>;
+
+};
+
+&sdhci0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci0_default>;
+ no-1-8-v;
+ xlnx,mio_bank = <0>;
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&watchdog0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_watchdog0_default>;
+};
+
+&ttc0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ttc0_default>;
+};
+
+&ttc1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ttc1_default>;
+};
+
+&ttc2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ttc2_default>;
+};
+
+&ttc3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ttc3_default>;
+};
+
+&pinctrl0 {
+ status = "okay";
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_18_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_18_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ mux {
+ groups = "gpio0_74_grp", "gpio0_75_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_74_grp", "gpio0_75_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_default: i2c1-default {
+ mux {
+ groups = "i2c1_19_grp";
+ function = "i2c1";
+ };
+
+ conf {
+ groups = "i2c1_19_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ mux {
+ groups = "gpio0_76_grp", "gpio0_77_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_76_grp", "gpio0_77_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_uart0_default: uart0-default {
+ mux {
+ groups = "uart0_17_grp";
+ function = "uart0";
+ };
+
+ conf {
+ groups = "uart0_17_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO70";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO71";
+ bias-disable;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_18_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_18_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO73";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO72";
+ bias-disable;
+ };
+ };
+
+ pinctrl_gem1_default: gem1-default {
+ mux {
+ function = "ethernet1";
+ groups = "ethernet1_0_grp";
+ };
+
+ conf {
+ groups = "ethernet1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO44", "MIO45", "MIO46", "MIO47", "MIO48",
+ "MIO49";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO38", "MIO39", "MIO40", "MIO41", "MIO42",
+ "MIO43";
+ bias-disable;
+ low-power-enable;
+ };
+
+ mux-mdio {
+ function = "mdio1";
+ groups = "mdio1_0_grp";
+ };
+
+ conf-mdio {
+ groups = "mdio1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_sdhci0_default: sdhci0-default {
+ mux {
+ groups = "sdio0_0_grp";
+ function = "sdio0";
+ };
+
+ conf {
+ groups = "sdio0_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "sdio0_0_cd_grp";
+ function = "sdio0_cd";
+ };
+
+ conf-cd {
+ groups = "sdio0_0_cd_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux-wp {
+ groups = "sdio0_0_wp_grp";
+ function = "sdio0_wp";
+ };
+
+ conf-wp {
+ groups = "sdio0_0_wp_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_watchdog0_default: watchdog0-default {
+ mux-clk {
+ groups = "swdt0_1_clk_grp";
+ function = "swdt0_clk";
+ };
+
+ conf-clk {
+ groups = "swdt0_1_clk_grp";
+ bias-pull-up;
+ };
+
+ mux-rst {
+ groups = "swdt0_1_rst_grp";
+ function = "swdt0_rst";
+ };
+
+ conf-rst {
+ groups = "swdt0_1_rst_grp";
+ bias-disable;
+ slew-rate = <SLEW_RATE_SLOW>;
+ };
+ };
+
+ pinctrl_ttc0_default: ttc0-default {
+ mux-clk {
+ groups = "ttc0_0_clk_grp";
+ function = "ttc0_clk";
+ };
+
+ conf-clk {
+ groups = "ttc0_0_clk_grp";
+ bias-pull-up;
+ };
+
+ mux-wav {
+ groups = "ttc0_0_wav_grp";
+ function = "ttc0_wav";
+ };
+
+ conf-wav {
+ groups = "ttc0_0_wav_grp";
+ bias-disable;
+ slew-rate = <SLEW_RATE_SLOW>;
+ };
+ };
+
+ pinctrl_ttc1_default: ttc1-default {
+ mux-clk {
+ groups = "ttc1_0_clk_grp";
+ function = "ttc1_clk";
+ };
+
+ conf-clk {
+ groups = "ttc1_0_clk_grp";
+ bias-pull-up;
+ };
+
+ mux-wav {
+ groups = "ttc1_0_wav_grp";
+ function = "ttc1_wav";
+ };
+
+ conf-wav {
+ groups = "ttc1_0_wav_grp";
+ bias-disable;
+ slew-rate = <SLEW_RATE_SLOW>;
+ };
+ };
+
+ pinctrl_ttc2_default: ttc2-default {
+ mux-clk {
+ groups = "ttc2_0_clk_grp";
+ function = "ttc2_clk";
+ };
+
+ conf-clk {
+ groups = "ttc2_0_clk_grp";
+ bias-pull-up;
+ };
+
+ mux-wav {
+ groups = "ttc2_0_wav_grp";
+ function = "ttc2_wav";
+ };
+
+ conf-wav {
+ groups = "ttc2_0_wav_grp";
+ bias-disable;
+ slew-rate = <SLEW_RATE_SLOW>;
+ };
+ };
+
+ pinctrl_ttc3_default: ttc3-default {
+ mux-clk {
+ groups = "ttc3_0_clk_grp";
+ function = "ttc3_clk";
+ };
+
+ conf-clk {
+ groups = "ttc3_0_clk_grp";
+ bias-pull-up;
+ };
+
+ mux-wav {
+ groups = "ttc3_0_wav_grp";
+ function = "ttc3_wav";
+ };
+
+ conf-wav {
+ groups = "ttc3_0_wav_grp";
+ bias-disable;
+ slew-rate = <SLEW_RATE_SLOW>;
+ };
+ };
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP ZCU100
+ *
+ * (C) Copyright 2016, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Nathalie Chan King Choy <nathalie@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP ZCU100 RevA";
+ compatible = "xlnx,zynqmp-zcu100-revA", "xlnx,zynqmp-zcu100", "xlnx,zynqmp";
+
+ aliases {
+ gpio0 = &gpio;
+ gpio1 = &max3107;
+ i2c0 = &i2c0;
+ rtc0 = &rtc;
+ serial0 = &uart1;
+ serial1 = &max3107;
+ serial2 = &dcc;
+ spi0 = &qspi;
+ spi1 = &spi0;
+ spi2 = &spi1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ sw4 {
+ label = "sw4";
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>; /* shared with pmic IRQ */ /* uboot: gpio input 39 */
+ linux,code = <108>; /* down */
+ gpio-key,wakeup;
+ autorepeat;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ ds2 {
+ label = "ds2";
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; /* uboot: gpio toggle 20 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ ds3 {
+ label = "ds3";
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx"; /* WLAN tx */
+ default-state = "off";
+ };
+
+ ds4 {
+ label = "ds4";
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0rx"; /* WLAN rx */
+ default-state = "off";
+ };
+
+ ds5 {
+ label = "ds5";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* FIXME this is not correct - used fixed-regulator for it */
+ vbus_det { /* U5 USB5744 VBUS detection via MIO7 */
+ label = "vbus_det";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ clk3_6: clk3_6 { /* for spi uart max3107 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <3600000>;
+ };
+
+ ltc2952: ltc2952 { /* U7 */
+ compatible = "lltc,ltc2952";
+ trigger-gpios = <&gpio 23 GPIO_ACTIVE_LOW>; /* INT line - input */
+ watchdog-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; /* FIXME Bogus - set it up to max3107 */
+ kill-gpios = <&gpio 25 GPIO_ACTIVE_LOW>; /* KILL signal - output */
+ };
+
+ wmmcsdio_fixed: fixedregulator-mmcsdio {
+ compatible = "regulator-fixed";
+ regulator-name = "wmmcsdio_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sdio_pwrseq: sdio_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&max3107 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ };
+};
+
+&dcc {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+ i2cswitch@75 { /* u11 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2csw_0: i2c@0 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /*
+ * LSEXP_I2C0
+ */
+ };
+ i2csw_1: i2c@1 { /* i2c mw 75 0 2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /*
+ * LSEXP_I2C1
+ */
+ };
+ i2csw_2: i2c@2 { /* i2c mw 75 0 4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /*
+ * HSEXP_I2C2
+ */
+ };
+ i2csw_3: i2c@3 { /* i2c mw 75 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /*
+ * HSEXP_I2C3
+ */
+ };
+ i2csw_4: i2c@4 { /* i2c mw 75 0 10 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+
+ /* Comment it out because will be pre-programmed
+ at the factory */
+
+ pmic: tps65086x@5e { // Custom TI PMIC u33
+ compatible = "ti,tps65086";
+ reg = <0x5e>;
+ interrupt-parent = <&gpio>;
+ interrupts = <39 GPIO_ACTIVE_LOW>; /* shared with pmic IRQ */
+ #gpio-cells = <2>;
+ gpio-controller;
+
+/*
+ sys-supply = <&some_reg>;
+ // spec 12V
+
+ buck1 5V0
+ buck2 PSINTLP (no idea)
+ buck3 VCC_PSDDR 1V1
+ buck4 3V3
+ buck5 1V2
+ buck6 VCC_PSAUX 1V8
+
+ vin-sm0-supply = <&some_reg>;
+ vin-sm1-supply = <&some_reg>;
+ vin-sm2-supply = <&some_reg>;
+ vinldo01-supply = <...>;
+ vinldo23-supply = <...>;
+ vinldo4-supply = <...>;
+ vinldo678-supply = <...>;
+ vinldo9-supply = <...>;
+
+ regulators {
+ sys_reg: sys {
+ regulator-name = "vdd_sys";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm0_reg: sm0 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm1_reg: sm1 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm2_reg: sm2 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <4550000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0_reg: ldo0 {
+ regulator-name = "PCIE CLK";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2475000>;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ // FIXME look at this one
+ ldo_rtc {
+ regulator-name = "vdd_rtc_out,vdd_cell";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ */
+ };
+ };
+ i2csw_5: i2c@5 { /* i2c mw 75 0 20 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /*
+ * SYSMON
+ */
+ };
+ i2csw_6: i2c@6 { /* i2c mw 75 0 40 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /*
+ * EEPROM with globally unique ID (will provide MAC address)
+ */
+ eeprom@50 { /* u35 - 24aa02E48T */
+ compatible = "atmel,24c02"; /* 8 blocks 50-57 - works */
+ reg = <0x50>; /* low 3 bits: don't care */
+ };
+ };
+ i2csw_7: i2c@7 { /* i2c mw 75 0 80 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /*
+ * usb5744 - U5
+ * 100kHz - this is default freq for us
+ */
+ /* FIXME 0x2c 0x2d - disabled because of SMBUS */
+ };
+ };
+};
+
+&qspi {
+ status = "okay"; /* This device may be DNP for cost savings */
+ flash@0 { /* single x4 - 16 MB flash at U13 */
+ compatible = "n25q128a13", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x9E0000>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+/* SD0 only supports 3.3V, no level shifter */
+&sdhci0 {
+ status = "okay";
+ no-1-8-v;
+ broken-cd; /* CD has to be enabled by default */
+ disable-wp;
+ xlnx,mio_bank = <0>;
+};
+
+&sdhci1 {
+ status = "okay";
+ bus-width = <0x4>;
+ xlnx,mio_bank = <0>;
+ non-removable;
+ disable-wp;
+ cap-power-off-card;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ max-frequency = <16000000>;
+ vqmmc-supply = <&wmmcsdio_fixed>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1831";
+ reg = <2>;
+ interrupt-parent = <&gpio>;
+ interrupts = <76 IRQ_TYPE_EDGE_RISING>; /* MIO76 WLAN_IRQ 1V8 */
+ };
+};
+
+&serdes {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+ max3107: max3107@0 { /* I'm assuming no offset...? */
+ compatible = "maxim,max3107";
+ spi-max-frequency = <26000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio>;
+ interrupts = <77 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk3_6>;
+ clock-names = "osc";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&spi1 { /* High Speed connector */
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "peripheral";
+/* phy-names = "usb3-phy";
+ phys = <&lane2 PHY_TYPE_USB3 0 0 26000000>; */
+ maximum-speed = "high-speed"; /* super-speed */
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+ status = "okay";
+};
+
+&dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+/* phy-names = "usb3-phy";
+ phys = <&lane3 PHY_TYPE_USB3 1 0 26000000>; */
+ maximum-speed = "high-speed"; /* super-speed */
+};
+
+&xilinx_drm {
+ status = "okay";
+};
+
+&xlnx_dp {
+ status = "okay";
+ phy-names = "dp-phy0", "dp-phy1";
+ phys = <&lane1 PHY_TYPE_DP 0 1 27000000>,
+ <&lane0 PHY_TYPE_DP 1 1 27000000>;
+};
+
+&xlnx_dp_sub {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm0 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_card {
+ status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP ZCU100 revB
+ *
+ * (C) Copyright 2017, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include "zynqmp-zcu100-revB.dts"
+
+/* loopback */
+&i2csw_0 {
+ eeprom0: eeprom@54 { /* u1 */
+ compatible = "at,24c02";
+ reg = <0x54>;
+ };
+};
+
+&i2csw_1 {
+ eeprom1: eeprom@54 { /* u2 */
+ compatible = "at,24c02";
+ reg = <0x54>;
+ };
+};
+
+&i2csw_2 {
+ eeprom2: eeprom@54 { /* u3 */
+ compatible = "at,24c02";
+ reg = <0x54>;
+ };
+};
+
+&i2csw_3 {
+ eeprom3: eeprom@54 { /* u4 */
+ compatible = "at,24c02";
+ reg = <0x54>;
+ };
+};
+
+&spi1 { /* High Speed connector */
+ flash: at45db041@0 { /* u5 */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <85000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "test";
+ reg = <0x0 0x84000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP ZCU100 revB
+ *
+ * (C) Copyright 2016, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Nathalie Chan King Choy <nathalie@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP ZCU100 RevB";
+ compatible = "xlnx,zynqmp-zcu100-revB", "xlnx,zynqmp-zcu100", "xlnx,zynqmp";
+
+ aliases {
+ gpio0 = &gpio;
+ i2c0 = &i2c1;
+ rtc0 = &rtc;
+ serial0 = &uart1;
+ serial1 = &uart0;
+ serial2 = &dcc;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ sw4 {
+ label = "sw4";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>; /* shared with pmic IRQ */
+ linux,code = <108>; /* down */
+ gpio-key,wakeup; /* FIXME test this */
+ autorepeat;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>,
+ <&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>,
+ <&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>,
+ <&xilinx_ams 9>, <&xilinx_ams 10>,
+ <&xilinx_ams 11>, <&xilinx_ams 12>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ ds2 {
+ label = "ds2";
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; /* uboot: gpio toggle 20 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ ds3 {
+ label = "ds3";
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx"; /* WLAN tx */
+ default-state = "off";
+ };
+
+ ds4 {
+ label = "ds4";
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0rx"; /* WLAN rx */
+ default-state = "off";
+ };
+
+ ds5 {
+ label = "ds5";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "bluetooth-power";
+ };
+
+ /* FIXME this is not correct - used fixed-regulator for it */
+ vbus_det { /* U5 USB5744 VBUS detection via MIO25 */
+ label = "vbus_det";
+ gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ bt_power {
+ label = "bt_power";
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ ltc2952: ltc2952 { /* U7 */
+ /*
+ * FIXME this is ltc2954 not ltc2952 - try this driver and
+ * maybe just extend compatible string.
+ */
+ compatible = "lltc,ltc2954", "lltc,ltc2952";
+ trigger-gpios = <&gpio 26 GPIO_ACTIVE_LOW>; /* INT line - input */
+ /* If there is HW watchdog on mezzanine this signal should be connected there */
+ watchdog-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; /* FIXME - unconnected MIO pin now */
+ kill-gpios = <&gpio 34 GPIO_ACTIVE_LOW>; /* KILL signal - output */
+ };
+
+ wmmcsdio_fixed: fixedregulator-mmcsdio {
+ compatible = "regulator-fixed";
+ regulator-name = "wmmcsdio_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sdio_pwrseq: sdio_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ };
+};
+
+&dcc {
+ status = "okay";
+};
+
+&pmufw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmu_default>;
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names = "UART1_TX", "UART1_RX", "UART0_RX", "UART0_TX", "I2C1_SCL",
+ "I2C1_SDA", "SPI1_SCLK", "WLAN_EN", "BT_EN", "SPI1_CS",
+ "SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1",
+ "SD0_DAT2", "SD0_DAT3", "PS_LED3", "PS_LED2", "PS_LED1",
+ "PS_LED0", "SD0_CMD", "SD0_CLK", "GPIO_PB", "SD0_DETECT",
+ "VBUS_DET", "POWER_INT", "DP_AUX", "DP_HPD", "DP_OE",
+ "DP_AUX_IN", "INA226_ALERT", "PS_FP_PWR_EN", "PL_PWR_EN", "POWER_KILL",
+ "", "GPIO-A", "GPIO-B", "SPI0_SCLK", "GPIO-C",
+ "GPIO-D", "SPI0_CS", "SPI0_MISO", "SPI_MOSI", "GPIO-E",
+ "GPIO-F", "SD1_D0", "SD1_D1", "SD1_D2", "SD1_D3",
+ "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2",
+ "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3",
+ "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK",
+ "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1",
+ "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6",
+ "USB_DATA7", "WLAN_IRQ", "", /* MIO end and EMIO start */
+ "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ clock-frequency = <100000>;
+ i2cswitch@75 { /* u11 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2csw_0: i2c@0 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /*
+ * LSEXP_I2C0
+ */
+ };
+ i2csw_1: i2c@1 { /* i2c mw 75 0 2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /*
+ * LSEXP_I2C1
+ */
+ };
+ i2csw_2: i2c@2 { /* i2c mw 75 0 4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /*
+ * HSEXP_I2C2
+ */
+ };
+ i2csw_3: i2c@3 { /* i2c mw 75 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /*
+ * HSEXP_I2C3
+ */
+ };
+ i2csw_4: i2c@4 { /* i2c mw 75 0 10 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+
+ /* Comment it out because will be pre-programmed
+ at the factory */
+
+ pmic: tps65086x@5e { // Custom TI PMIC u33
+ compatible = "ti,tps65086";
+ reg = <0x5e>;
+ interrupt-parent = <&gpio>;
+ interrupts = <23 GPIO_ACTIVE_LOW>; /* shared with pmic IRQ */
+ #gpio-cells = <2>;
+ gpio-controller;
+
+/*
+ sys-supply = <&some_reg>;
+ // spec 12V
+
+ buck1 5V0
+ buck2 PSINTLP (no idea)
+ buck3 VCC_PSDDR 1V1
+ buck4 3V3
+ buck5 1V2
+ buck6 VCC_PSAUX 1V8
+
+ vin-sm0-supply = <&some_reg>;
+ vin-sm1-supply = <&some_reg>;
+ vin-sm2-supply = <&some_reg>;
+ vinldo01-supply = <...>;
+ vinldo23-supply = <...>;
+ vinldo4-supply = <...>;
+ vinldo678-supply = <...>;
+ vinldo9-supply = <...>;
+
+ regulators {
+ sys_reg: sys {
+ regulator-name = "vdd_sys";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm0_reg: sm0 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm1_reg: sm1 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm2_reg: sm2 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <4550000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0_reg: ldo0 {
+ regulator-name = "PCIE CLK";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2475000>;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ // FIXME look at this one
+ ldo_rtc {
+ regulator-name = "vdd_rtc_out,vdd_cell";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ */
+ };
+ };
+ i2csw_5: i2c@5 { /* i2c mw 75 0 20 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* PS_PMBUS */
+ ina226@40 { /* u35 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <10000>;
+ /* MIO31 is alert which should be routed to PMUFW */
+ };
+ };
+ i2csw_6: i2c@6 { /* i2c mw 75 0 40 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /*
+ * Not Connected
+ */
+ };
+ i2csw_7: i2c@7 { /* i2c mw 75 0 80 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /*
+ * usb5744 (DNP) - U5
+ * 100kHz - this is default freq for us
+ */
+ };
+ };
+};
+
+&pinctrl0 {
+ status = "okay";
+ pinctrl_i2c1_default: i2c1-default {
+ mux {
+ groups = "i2c1_1_grp";
+ function = "i2c1";
+ };
+
+ conf {
+ groups = "i2c1_1_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ mux {
+ groups = "gpio0_4_grp", "gpio0_5_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_4_grp", "gpio0_5_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_pmu_default: pmu-default {
+ mux {
+ groups = "pmu0_8_grp";
+ function = "pmu0";
+ };
+
+ conf {
+ groups = "pmu0_8_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_sdhci0_default: sdhci0-default {
+ mux {
+ groups = "sdio0_4bit_0_0_grp";
+ function = "sdio0";
+ };
+
+ conf {
+ groups = "sdio0_4bit_0_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "sdio0_0_cd_grp";
+ function = "sdio0_cd";
+ };
+
+ conf-cd {
+ groups = "sdio0_0_cd_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_sdhci1_default: sdhci1-default {
+ mux {
+ groups = "sdio1_4bit_0_1_grp";
+ function = "sdio1";
+ };
+
+ conf {
+ groups = "sdio1_4bit_0_1_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_spi0_default: spi0-default {
+ mux {
+ groups = "spi0_3_grp";
+ function = "spi0";
+ };
+
+ conf {
+ groups = "spi0_3_grp";
+ bias-disable;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux-cs {
+ groups = "spi0_3_ss0_grp";
+ function = "spi0_ss";
+ };
+
+ conf-cs {
+ groups = "spi0_3_ss0_grp";
+ bias-disable;
+ };
+
+ };
+
+ pinctrl_spi1_default: spi1-default {
+ mux {
+ groups = "spi1_0_grp";
+ function = "spi1";
+ };
+
+ conf {
+ groups = "spi1_0_grp";
+ bias-disable;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux-cs {
+ groups = "spi1_0_ss0_grp";
+ function = "spi1_ss";
+ };
+
+ conf-cs {
+ groups = "spi1_0_ss0_grp";
+ bias-disable;
+ };
+
+ };
+
+ pinctrl_uart0_default: uart0-default {
+ mux {
+ groups = "uart0_0_grp";
+ function = "uart0";
+ };
+
+ conf {
+ groups = "uart0_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO3";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO2";
+ bias-disable;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_0_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO1";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO0";
+ bias-disable;
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO52", "MIO53", "MIO55";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+ "MIO60", "MIO61", "MIO62", "MIO63";
+ bias-disable;
+ };
+ };
+
+ pinctrl_usb1_default: usb1-default {
+ mux {
+ groups = "usb1_0_grp";
+ function = "usb1";
+ };
+
+ conf {
+ groups = "usb1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO64", "MIO65", "MIO67";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+ "MIO72", "MIO73", "MIO74", "MIO75";
+ bias-disable;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+/* SD0 only supports 3.3V, no level shifter */
+&sdhci0 {
+ status = "okay";
+ no-1-8-v;
+ broken-cd; /* CD has to be enabled by default */
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci0_default>;
+ xlnx,mio_bank = <0>;
+};
+
+&sdhci1 {
+ status = "okay";
+ bus-width = <0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci1_default>;
+ xlnx,mio_bank = <0>;
+ non-removable;
+ disable-wp;
+ cap-power-off-card;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ vqmmc-supply = <&wmmcsdio_fixed>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1831";
+ reg = <2>;
+ interrupt-parent = <&gpio>;
+ interrupts = <76 IRQ_TYPE_EDGE_RISING>; /* MIO76 WLAN_IRQ 1V8 */
+ };
+};
+
+&serdes {
+ status = "okay";
+};
+
+&spi0 { /* Low Speed connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+};
+
+&spi1 { /* High Speed connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "peripheral";
+ phy-names = "usb3-phy";
+ phys = <&lane2 PHY_TYPE_USB3 0 0 26000000>;
+ maximum-speed = "super-speed";
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_default>;
+};
+
+&dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+ phy-names = "usb3-phy";
+ phys = <&lane3 PHY_TYPE_USB3 1 0 26000000>;
+ maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+ status = "okay";
+};
+
+&xilinx_drm {
+ status = "okay";
+};
+
+&xlnx_dp {
+ status = "okay";
+ phy-names = "dp-phy0", "dp-phy1";
+ phys = <&lane1 PHY_TYPE_DP 0 1 27000000>,
+ <&lane0 PHY_TYPE_DP 1 1 27000000>;
+};
+
+&xlnx_dp_sub {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm0 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_card {
+ status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
+
+&xilinx_ams {
+ status = "okay";
+};
+
+&ams_ps {
+ status = "okay";
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP ZCU100 revC
+ *
+ * (C) Copyright 2016, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Nathalie Chan King Choy <nathalie@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP ZCU100 RevC";
+ compatible = "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", "xlnx,zynqmp";
+
+ aliases {
+ gpio0 = &gpio;
+ i2c0 = &i2c1;
+ rtc0 = &rtc;
+ serial0 = &uart1;
+ serial1 = &uart0;
+ serial2 = &dcc;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ sw4 {
+ label = "sw4";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ linux,code = <108>; /* down */
+ gpio-key,wakeup; /* FIXME test this */
+ autorepeat;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>,
+ <&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>,
+ <&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>,
+ <&xilinx_ams 9>, <&xilinx_ams 10>,
+ <&xilinx_ams 11>, <&xilinx_ams 12>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ ds2 {
+ label = "ds2";
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; /* uboot: gpio toggle 20 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ ds3 {
+ label = "ds3";
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx"; /* WLAN tx */
+ default-state = "off";
+ };
+
+ ds4 {
+ label = "ds4";
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0rx"; /* WLAN rx */
+ default-state = "off";
+ };
+
+ ds5 {
+ label = "ds5";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "bluetooth-power";
+ };
+
+ /* FIXME this is not correct - used fixed-regulator for it */
+ vbus_det { /* U5 USB5744 VBUS detection via MIO25 */
+ label = "vbus_det";
+ gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ bt_power {
+ label = "bt_power";
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ ltc2954: ltc2954 { /* U7 */
+ /*
+ * FIXME this is ltc2954 not ltc2952 - try this driver and
+ * maybe just extend compatible string.
+ */
+ compatible = "lltc,ltc2954", "lltc,ltc2952";
+ trigger-gpios = <&gpio 26 GPIO_ACTIVE_LOW>; /* INT line - input */
+ /* If there is HW watchdog on mezzanine this signal should be connected there */
+ watchdog-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; /* MIO on PAD */
+ kill-gpios = <&gpio 34 GPIO_ACTIVE_LOW>; /* KILL signal - output */
+ };
+
+ wmmcsdio_fixed: fixedregulator-mmcsdio {
+ compatible = "regulator-fixed";
+ regulator-name = "wmmcsdio_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sdio_pwrseq: sdio_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ };
+};
+
+&dcc {
+ status = "okay";
+};
+
+&pmufw {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmu_default>;
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names = "UART1_TX", "UART1_RX", "UART0_RX", "UART0_TX", "I2C1_SCL",
+ "I2C1_SDA", "SPI1_SCLK", "WLAN_EN", "BT_EN", "SPI1_CS",
+ "SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1",
+ "SD0_DAT2", "SD0_DAT3", "PS_LED3", "PS_LED2", "PS_LED1",
+ "PS_LED0", "SD0_CMD", "SD0_CLK", "GPIO_PB", "SD0_DETECT",
+ "VBUS_DET", "POWER_INT", "DP_AUX", "DP_HPD", "DP_OE",
+ "DP_AUX_IN", "INA226_ALERT", "PS_FP_PWR_EN", "PL_PWR_EN", "POWER_KILL",
+ "", "GPIO-A", "GPIO-B", "SPI0_SCLK", "GPIO-C",
+ "GPIO-D", "SPI0_CS", "SPI0_MISO", "SPI_MOSI", "GPIO-E",
+ "GPIO-F", "SD1_D0", "SD1_D1", "SD1_D2", "SD1_D3",
+ "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2",
+ "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3",
+ "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK",
+ "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1",
+ "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6",
+ "USB_DATA7", "WLAN_IRQ", "PMIC_IRQ", /* MIO end and EMIO start */
+ "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ clock-frequency = <100000>;
+ i2cswitch@75 { /* u11 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2csw_0: i2c@0 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /*
+ * LSEXP_I2C0
+ */
+ };
+ i2csw_1: i2c@1 { /* i2c mw 75 0 2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /*
+ * LSEXP_I2C1
+ */
+ };
+ i2csw_2: i2c@2 { /* i2c mw 75 0 4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /*
+ * HSEXP_I2C2
+ */
+ };
+ i2csw_3: i2c@3 { /* i2c mw 75 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /*
+ * HSEXP_I2C3
+ */
+ };
+ i2csw_4: i2c@4 { /* i2c mw 75 0 10 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+
+ /* Comment it out because will be pre-programmed
+ at the factory */
+
+ pmic: tps65086x@5e { // Custom TI PMIC u33
+ compatible = "ti,tps65086";
+ reg = <0x5e>;
+ interrupt-parent = <&gpio>;
+ interrupts = <77 GPIO_ACTIVE_LOW>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+/*
+ sys-supply = <&some_reg>;
+ // spec 12V
+
+ buck1 5V0
+ buck2 PSINTLP (no idea)
+ buck3 VCC_PSDDR 1V1
+ buck4 3V3
+ buck5 1V2
+ buck6 VCC_PSAUX 1V8
+
+ vin-sm0-supply = <&some_reg>;
+ vin-sm1-supply = <&some_reg>;
+ vin-sm2-supply = <&some_reg>;
+ vinldo01-supply = <...>;
+ vinldo23-supply = <...>;
+ vinldo4-supply = <...>;
+ vinldo678-supply = <...>;
+ vinldo9-supply = <...>;
+
+ regulators {
+ sys_reg: sys {
+ regulator-name = "vdd_sys";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm0_reg: sm0 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm1_reg: sm1 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sm2_reg: sm2 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <4550000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0_reg: ldo0 {
+ regulator-name = "PCIE CLK";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = < 725000>;
+ regulator-max-microvolt = <1500000>;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2475000>;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ // FIXME look at this one
+ ldo_rtc {
+ regulator-name = "vdd_rtc_out,vdd_cell";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ */
+ };
+ };
+ i2csw_5: i2c@5 { /* i2c mw 75 0 20 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* PS_PMBUS */
+ ina226@40 { /* u35 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <10000>;
+ /* MIO31 is alert which should be routed to PMUFW */
+ };
+ };
+ i2csw_6: i2c@6 { /* i2c mw 75 0 40 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /*
+ * Not Connected
+ */
+ };
+ i2csw_7: i2c@7 { /* i2c mw 75 0 80 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /*
+ * usb5744 (DNP) - U5
+ * 100kHz - this is default freq for us
+ */
+ };
+ };
+};
+
+&pinctrl0 {
+ status = "okay";
+ pinctrl_i2c1_default: i2c1-default {
+ mux {
+ groups = "i2c1_1_grp";
+ function = "i2c1";
+ };
+
+ conf {
+ groups = "i2c1_1_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ mux {
+ groups = "gpio0_4_grp", "gpio0_5_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_4_grp", "gpio0_5_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_pmu_default: pmu-default {
+ mux {
+ groups = "pmu0_8_grp";
+ function = "pmu0";
+ };
+
+ conf {
+ groups = "pmu0_8_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_sdhci0_default: sdhci0-default {
+ mux {
+ groups = "sdio0_4bit_0_0_grp";
+ function = "sdio0";
+ };
+
+ conf {
+ groups = "sdio0_4bit_0_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "sdio0_0_cd_grp";
+ function = "sdio0_cd";
+ };
+
+ conf-cd {
+ groups = "sdio0_0_cd_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_sdhci1_default: sdhci1-default {
+ mux {
+ groups = "sdio1_4bit_0_1_grp";
+ function = "sdio1";
+ };
+
+ conf {
+ groups = "sdio1_4bit_0_1_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_spi0_default: spi0-default {
+ mux {
+ groups = "spi0_3_grp";
+ function = "spi0";
+ };
+
+ conf {
+ groups = "spi0_3_grp";
+ bias-disable;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux-cs {
+ groups = "spi0_3_ss0_grp";
+ function = "spi0_ss";
+ };
+
+ conf-cs {
+ groups = "spi0_3_ss0_grp";
+ bias-disable;
+ };
+
+ };
+
+ pinctrl_spi1_default: spi1-default {
+ mux {
+ groups = "spi1_0_grp";
+ function = "spi1";
+ };
+
+ conf {
+ groups = "spi1_0_grp";
+ bias-disable;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux-cs {
+ groups = "spi1_0_ss0_grp";
+ function = "spi1_ss";
+ };
+
+ conf-cs {
+ groups = "spi1_0_ss0_grp";
+ bias-disable;
+ };
+
+ };
+
+ pinctrl_uart0_default: uart0-default {
+ mux {
+ groups = "uart0_0_grp";
+ function = "uart0";
+ };
+
+ conf {
+ groups = "uart0_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO3";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO2";
+ bias-disable;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_0_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO1";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO0";
+ bias-disable;
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO52", "MIO53", "MIO55";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+ "MIO60", "MIO61", "MIO62", "MIO63";
+ bias-disable;
+ };
+ };
+
+ pinctrl_usb1_default: usb1-default {
+ mux {
+ groups = "usb1_0_grp";
+ function = "usb1";
+ };
+
+ conf {
+ groups = "usb1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO64", "MIO65", "MIO67";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+ "MIO72", "MIO73", "MIO74", "MIO75";
+ bias-disable;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+/* SD0 only supports 3.3V, no level shifter */
+&sdhci0 {
+ status = "okay";
+ no-1-8-v;
+ broken-cd; /* CD has to be enabled by default */
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci0_default>;
+ xlnx,mio_bank = <0>;
+};
+
+&sdhci1 {
+ status = "okay";
+ bus-width = <0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci1_default>;
+ xlnx,mio_bank = <0>;
+ non-removable;
+ disable-wp;
+ cap-power-off-card;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ vqmmc-supply = <&wmmcsdio_fixed>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1831";
+ reg = <2>;
+ interrupt-parent = <&gpio>;
+ interrupts = <76 IRQ_TYPE_EDGE_RISING>; /* MIO76 WLAN_IRQ 1V8 */
+ };
+};
+
+&serdes {
+ status = "okay";
+};
+
+&spi0 { /* Low Speed connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+};
+
+&spi1 { /* High Speed connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "peripheral";
+ phy-names = "usb3-phy";
+ phys = <&lane2 PHY_TYPE_USB3 0 0 26000000>;
+ maximum-speed = "super-speed";
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_default>;
+};
+
+&dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+ phy-names = "usb3-phy";
+ phys = <&lane3 PHY_TYPE_USB3 1 0 26000000>;
+ maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+ status = "okay";
+};
+
+&xilinx_drm {
+ status = "okay";
+};
+
+&xlnx_dp {
+ status = "okay";
+ phy-names = "dp-phy0", "dp-phy1";
+ phys = <&lane1 PHY_TYPE_DP 0 1 27000000>,
+ <&lane0 PHY_TYPE_DP 1 1 27000000>;
+};
+
+&xlnx_dp_sub {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm0 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_card {
+ status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
+
+&xilinx_ams {
+ status = "okay";
+};
+
+&ams_ps {
+ status = "okay";
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP ZCU102 Rev1.0
+ *
+ * (C) Copyright 2016, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include "zynqmp-zcu102-revB.dts"
+
+/ {
+ model = "ZynqMP ZCU102 Rev1.0";
+ compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+};
+
+&eeprom {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ board_sn: board_sn@0 {
+ reg = <0x0 0x14>;
+ };
+
+ eth_mac: eth_mac@20 {
+ reg = <0x20 0x6>;
+ };
+
+ board_name: board_name@d0 {
+ reg = <0xd0 0x6>;
+ };
+
+ board_revision: board_revision@e0 {
+ reg = <0xe0 0x3>;
+ };
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP ZCU102 RevA
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP ZCU102 RevA";
+ compatible = "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &dcc;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ sw19 {
+ label = "sw19";
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ linux,code = <108>; /* down */
+ gpio-key,wakeup;
+ autorepeat;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat_led {
+ label = "heartbeat";
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&can1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+ status = "okay";
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem3 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem3_default>;
+ phy0: phy@21 {
+ reg = <21>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ ti,rxctrl-strap-worka;
+ };
+};
+
+&gpio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+
+ tca6416_u97: gpio@20 {
+ /*
+ * Enable all GTs to out from U-Boot
+ * i2c mw 20 6 0 - setup IO to output
+ * i2c mw 20 2 ef - setup output values on pins 0-7
+ * i2c mw 20 3 ff - setup output values on pins 10-17
+ */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * IRQ not connected
+ * Lines:
+ * 0 - PS_GTR_LAN_SEL0
+ * 1 - PS_GTR_LAN_SEL1
+ * 2 - PS_GTR_LAN_SEL2
+ * 3 - PS_GTR_LAN_SEL3
+ * 4 - PCI_CLK_DIR_SEL
+ * 5 - IIC_MUX_RESET_B
+ * 6 - GEM3_EXP_RESET_B
+ * 7, 10 - 17 - not connected
+ */
+
+ gtr_sel0 {
+ gpio-hog;
+ gpios = <0 0>;
+ output-low; /* PCIE = 0, DP = 1 */
+ line-name = "sel0";
+ };
+ gtr_sel1 {
+ gpio-hog;
+ gpios = <1 0>;
+ output-high; /* PCIE = 0, DP = 1 */
+ line-name = "sel1";
+ };
+ gtr_sel2 {
+ gpio-hog;
+ gpios = <2 0>;
+ output-high; /* PCIE = 0, USB0 = 1 */
+ line-name = "sel2";
+ };
+ gtr_sel3 {
+ gpio-hog;
+ gpios = <3 0>;
+ output-high; /* PCIE = 0, SATA = 1 */
+ line-name = "sel3";
+ };
+ };
+
+ tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * IRQ not connected
+ * Lines:
+ * 0 - VCCPSPLL_EN
+ * 1 - MGTRAVCC_EN
+ * 2 - MGTRAVTT_EN
+ * 3 - VCCPSDDRPLL_EN
+ * 4 - MIO26_PMU_INPUT_LS
+ * 5 - PL_PMBUS_ALERT
+ * 6 - PS_PMBUS_ALERT
+ * 7 - MAXIM_PMBUS_ALERT
+ * 10 - PL_DDR4_VTERM_EN
+ * 11 - PL_DDR4_VPP_2V5_EN
+ * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
+ * 13 - PS_DIMM_SUSPEND_EN
+ * 14 - PS_DDR4_VTERM_EN
+ * 15 - PS_DDR4_VPP_2V5_EN
+ * 16 - 17 - not connected
+ */
+ };
+
+ i2cswitch@75 { /* u60 */
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c@0 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* PS_PMBUS */
+ ina226@40 { /* u76 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <5000>;
+ };
+ ina226@41 { /* u77 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ ina226@42 { /* u78 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ ina226@43 { /* u87 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ ina226@44 { /* u85 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>;
+ };
+ ina226@45 { /* u86 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ ina226@46 { /* u93 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <5000>;
+ };
+ ina226@47 { /* u88 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>;
+ };
+ ina226@4a { /* u15 */
+ compatible = "ti,ina226";
+ reg = <0x4a>;
+ shunt-resistor = <5000>;
+ };
+ ina226@4b { /* u92 */
+ compatible = "ti,ina226";
+ reg = <0x4b>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@1 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* PL_PMBUS */
+ ina226@40 { /* u79 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+ ina226@41 { /* u81 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ ina226@42 { /* u80 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ ina226@43 { /* u84 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ ina226@44 { /* u16 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>;
+ };
+ ina226@45 { /* u65 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ ina226@46 { /* u74 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <5000>;
+ };
+ ina226@47 { /* u75 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@2 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* MAXIM_PMBUS - 00 */
+ max15301@a { /* u46 */
+ compatible = "max15301";
+ reg = <0xa>;
+ };
+ max15303@b { /* u4 */
+ compatible = "max15303";
+ reg = <0xb>;
+ };
+ max15303@10 { /* u13 */
+ compatible = "max15303";
+ reg = <0x10>;
+ };
+ max15301@13 { /* u47 */
+ compatible = "max15301";
+ reg = <0x13>;
+ };
+ max15303@14 { /* u7 */
+ compatible = "max15303";
+ reg = <0x14>;
+ };
+ max15303@15 { /* u6 */
+ compatible = "max15303";
+ reg = <0x15>;
+ };
+ max15303@16 { /* u10 */
+ compatible = "max15303";
+ reg = <0x16>;
+ };
+ max15303@17 { /* u9 */
+ compatible = "max15303";
+ reg = <0x17>;
+ };
+ max15301@18 { /* u63 */
+ compatible = "max15301";
+ reg = <0x18>;
+ };
+ max15303@1a { /* u49 */
+ compatible = "max15303";
+ reg = <0x1a>;
+ };
+ max15303@1d { /* u18 */
+ compatible = "max15303";
+ reg = <0x1d>;
+ };
+ max15303@20 { /* u8 */
+ compatible = "max15303";
+ status = "disabled"; /* unreachable */
+ reg = <0x20>;
+ };
+
+/* drivers/hwmon/pmbus/Kconfig:86: be called max20751.
+drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
+*/
+ max20751@72 { /* u95 FIXME - not detected */
+ compatible = "max20751";
+ reg = <0x72>;
+ };
+ max20751@73 { /* u96 FIXME - not detected */
+ compatible = "max20751";
+ reg = <0x73>;
+ };
+ };
+ /* Bus 3 is not connected */
+ };
+
+ /* FIXME PMOD - j160 */
+ /* FIXME MSP430F - u41 - not detected */
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+
+ /* FIXME PL i2c via PCA9306 - u45 */
+ /* FIXME MSP430 - u41 - not detected */
+ i2cswitch@74 { /* u34 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ i2c@0 { /* i2c mw 74 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /*
+ * IIC_EEPROM 1kB memory which uses 256B blocks
+ * where every block has different address.
+ * 0 - 256B address 0x54
+ * 256B - 512B address 0x55
+ * 512B - 768B address 0x56
+ * 768B - 1024B address 0x57
+ */
+ eeprom: eeprom@54 { /* u23 */
+ compatible = "at,24c08";
+ reg = <0x54>;
+ };
+ };
+ i2c@1 { /* i2c mw 74 0 2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ si5341: clock-generator1@36 { /* SI5341 - u69 */
+ compatible = "si5341";
+ reg = <0x36>;
+ };
+
+ };
+ i2c@2 { /* i2c mw 74 0 4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ si570_1: clock-generator2@5d { /* USER SI570 - u42 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <300000000>;
+ clock-frequency = <300000000>;
+ };
+ };
+ i2c@3 { /* i2c mw 74 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ si570_2: clock-generator3@5d { /* USER MGT SI570 - u56 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>; /* copy from zc702 */
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+ i2c@4 { /* i2c mw 74 0 10 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ si5328: clock-generator4@69 {/* SI5328 - u20 */
+ compatible = "silabs,si5328";
+ reg = <0x69>;
+ /*
+ * Chip has interrupt present connected to PL
+ * interrupt-parent = <&>;
+ * interrupts = <>;
+ */
+ };
+ };
+ /* 5 - 7 unconnected */
+ };
+
+ i2cswitch@75 {
+ compatible = "nxp,pca9548"; /* u135 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* HPC0_IIC */
+ };
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* HPC1_IIC */
+ };
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* SYSMON */
+ };
+ i2c@3 { /* i2c mw 75 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* DDR4 SODIMM */
+ dev@19 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x19>;
+ };
+ dev@30 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x30>;
+ };
+ dev@35 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x35>;
+ };
+ dev@36 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x36>;
+ };
+ dev@51 { /* u-boot detection - maybe SPD */
+ compatible = "xxx";
+ reg = <0x51>;
+ };
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* SEP 3 */
+ };
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* SEP 2 */
+ };
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* SEP 1 */
+ };
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* SEP 0 */
+ };
+ };
+};
+
+&pinctrl0 {
+ status = "okay";
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_3_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_3_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ mux {
+ groups = "gpio0_14_grp", "gpio0_15_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_14_grp", "gpio0_15_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_default: i2c1-default {
+ mux {
+ groups = "i2c1_4_grp";
+ function = "i2c1";
+ };
+
+ conf {
+ groups = "i2c1_4_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ mux {
+ groups = "gpio0_16_grp", "gpio0_17_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_16_grp", "gpio0_17_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_uart0_default: uart0-default {
+ mux {
+ groups = "uart0_4_grp";
+ function = "uart0";
+ };
+
+ conf {
+ groups = "uart0_4_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO18";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO19";
+ bias-disable;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_5_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_5_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO21";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO20";
+ bias-disable;
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO52", "MIO53", "MIO55";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+ "MIO60", "MIO61", "MIO62", "MIO63";
+ bias-disable;
+ };
+ };
+
+ pinctrl_gem3_default: gem3-default {
+ mux {
+ function = "ethernet3";
+ groups = "ethernet3_0_grp";
+ };
+
+ conf {
+ groups = "ethernet3_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+ "MIO75";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+ "MIO69";
+ bias-disable;
+ low-power-enable;
+ };
+
+ mux-mdio {
+ function = "mdio3";
+ groups = "mdio3_0_grp";
+ };
+
+ conf-mdio {
+ groups = "mdio3_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_can1_default: can1-default {
+ mux {
+ function = "can1";
+ groups = "can1_6_grp";
+ };
+
+ conf {
+ groups = "can1_6_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO25";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO24";
+ bias-disable;
+ };
+ };
+
+ pinctrl_sdhci1_default: sdhci1-default {
+ mux {
+ groups = "sdio1_0_grp";
+ function = "sdio1";
+ };
+
+ conf {
+ groups = "sdio1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "sdio1_0_cd_grp";
+ function = "sdio1_cd";
+ };
+
+ conf-cd {
+ groups = "sdio1_0_cd_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux-wp {
+ groups = "sdio1_0_wp_grp";
+ function = "sdio1_wp";
+ };
+
+ conf-wp {
+ groups = "sdio1_0_wp_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_gpio_default: gpio-default {
+ mux-sw {
+ function = "gpio0";
+ groups = "gpio0_22_grp", "gpio0_23_grp";
+ };
+
+ conf-sw {
+ groups = "gpio0_22_grp", "gpio0_23_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux-msp {
+ function = "gpio0";
+ groups = "gpio0_13_grp", "gpio0_38_grp";
+ };
+
+ conf-msp {
+ groups = "gpio0_13_grp", "gpio0_38_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-pull-up {
+ pins = "MIO22", "MIO23";
+ bias-pull-up;
+ };
+
+ conf-pull-none {
+ pins = "MIO13", "MIO38";
+ bias-disable;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+ is-dual = <1>;
+ flash@0 {
+ compatible = "m25p80"; /* 32MB */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ /* SATA OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&lane3 PHY_TYPE_SATA 1 1 125000000>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci1_default>;
+ xlnx,mio_bank = <1>;
+};
+
+&serdes {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+ phy-names = "usb3-phy";
+ phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>;
+ maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+ status = "okay";
+};
+
+&xilinx_ams {
+ status = "okay";
+};
+
+&ams_ps {
+ status = "okay";
+};
+
+&ams_pl {
+ status = "okay";
+};
+
+&xilinx_drm {
+ status = "okay";
+};
+
+&xlnx_dp {
+ status = "okay";
+ phy-names = "dp-phy0";
+ phys = <&lane1 PHY_TYPE_DP 0 3 27000000>;
+ xlnx,max-lanes = <1>;
+};
+
+&xlnx_dp_sub {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm0 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_card {
+ status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP ZCU102 RevB
+ *
+ * (C) Copyright 2016, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include "zynqmp-zcu102-revA.dts"
+
+/ {
+ model = "ZynqMP ZCU102 RevB";
+ compatible = "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+};
+
+&gem3 {
+ phy-handle = <&phyc>;
+ phyc: phy@c {
+ reg = <0xc>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ ti,rxctrl-strap-worka;
+ };
+ /* Cleanup from RevA */
+ /delete-node/ phy@21;
+};
+
+/* Different qspi 512Mbit version */
+
+/* Fix collision with u61 */
+&i2c0 {
+ i2cswitch@75 {
+ i2c@2 {
+ max15303@1b { /* u8 */
+ compatible = "max15303";
+ reg = <0x1b>;
+ };
+ /delete-node/ max15303@20;
+ };
+ };
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP ZCU104
+ *
+ * (C) Copyright 2017, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP ZCU104 RevA";
+ compatible = "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ gpio0 = &gpio;
+ i2c0 = &i2c1;
+ mmc0 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &dcc;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+&can1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+ status = "okay";
+};
+
+&gem3 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem3_default>;
+ phy0: phy@c {
+ reg = <0xc>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ ti,rxctrl-strap-worka;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+
+ /* Another connection to this bus via PL i2c via PCA9306 - u45 */
+ i2cswitch@74 { /* u34 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ i2c@0 { /* i2c mw 74 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /*
+ * IIC_EEPROM 1kB memory which uses 256B blocks
+ * where every block has different address.
+ * 0 - 256B address 0x54
+ * 256B - 512B address 0x55
+ * 512B - 768B address 0x56
+ * 768B - 1024B address 0x57
+ */
+ eeprom@54 { /* u23 */
+ compatible = "at,24c08";
+ reg = <0x54>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
+ i2c@1 { /* i2c mw 74 0 2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ clock_8t49n287: 8t49n287@6c { /* 8T49N287 - u182 */
+ compatible = "idt,8t49n287";
+ reg = <0x6c>;
+ };
+ };
+
+ i2c@2 { /* i2c mw 74 0 4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ irps5401_43: irps54012@43 { /* IRPS5401 - u175 */
+ #clock-cells = <0>;
+ compatible = "infineon,irps5401";
+ reg = <0x43>;
+ };
+ irps5401_4d: irps54012@4d { /* IRPS5401 - u180 */
+ #clock-cells = <0>;
+ compatible = "infineon,irps5401";
+ reg = <0x4d>;
+ };
+ };
+
+ i2c@4 { /* i2c mw 74 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* FIXME Npt detected */
+ tca6416_u97: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * IRQ not connected
+ * Lines:
+ * 0 - IRPS5401_ALERT_B
+ * 1 - HDMI_8T49N241_INT_ALM
+ * 2 - MAX6643_OT_B
+ * 3 - MAX6643_FANFAIL_B
+ * 5 - IIC_MUX_RESET_B
+ * 6 - GEM3_EXP_RESET_B
+ * 7 - FMC_LPC_PRSNT_M2C_B
+ * 4, 10 - 17 - not connected
+ */
+ };
+ };
+
+ i2c@5 { /* i2c mw 74 0 10 */ /* FMC_LPC */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c@7 { /* i2c mw 74 0 14 */ /* DDR4_SODIMM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ /* 3, 6 not connected */
+ };
+};
+
+&pinctrl0 {
+ status = "okay";
+
+ pinctrl_can1_default: can1-default {
+ mux {
+ function = "can1";
+ groups = "can1_6_grp";
+ };
+
+ conf {
+ groups = "can1_6_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+
+ conf-rx {
+ pins = "MIO25";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO24";
+ bias-disable;
+ };
+ };
+
+ pinctrl_i2c1_default: i2c1-default {
+ mux {
+ groups = "i2c1_4_grp";
+ function = "i2c1";
+ };
+
+ conf {
+ groups = "i2c1_4_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ mux {
+ groups = "gpio0_16_grp", "gpio0_17_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_16_grp", "gpio0_17_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+ };
+
+ pinctrl_gem3_default: gem3-default {
+ mux {
+ function = "ethernet3";
+ groups = "ethernet3_0_grp";
+ };
+
+ conf {
+ groups = "ethernet3_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+
+ conf-rx {
+ pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+ "MIO75";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+ "MIO69";
+ bias-disable;
+ low-power-enable;
+ };
+
+ mux-mdio {
+ function = "mdio3";
+ groups = "mdio3_0_grp";
+ };
+
+ conf-mdio {
+ groups = "mdio3_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_sdhci1_default: sdhci1-default {
+ mux {
+ groups = "sdio1_0_grp";
+ function = "sdio1";
+ };
+
+ conf {
+ groups = "sdio1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ drive-strength = <12>;
+ };
+
+ mux-cd {
+ groups = "sdio1_0_cd_grp";
+ function = "sdio1_cd";
+ };
+
+ conf-cd {
+ groups = "sdio1_0_cd_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_uart0_default: uart0-default {
+ mux {
+ groups = "uart0_4_grp";
+ function = "uart0";
+ };
+
+ conf {
+ groups = "uart0_4_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+
+ conf-rx {
+ pins = "MIO18";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO19";
+ bias-disable;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_5_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_5_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+
+ conf-rx {
+ pins = "MIO21";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO20";
+ bias-disable;
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ drive-strength = <12>;
+ };
+
+ conf-rx {
+ pins = "MIO52", "MIO53", "MIO55";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+ "MIO60", "MIO61", "MIO62", "MIO63";
+ bias-disable;
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ flash@0 {
+ compatible = "m25p80"; /* n25q512a 128MiB */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ /* SATA OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&lane3 PHY_TYPE_SATA 1 1 125000000>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ no-1-8-v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci1_default>;
+ xlnx,mio_bank = <1>;
+ disable-wp;
+};
+
+&serdes {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+ phy-names = "usb3-phy";
+ phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>;
+ maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+ status = "okay";
+};
+
+&xilinx_ams {
+ status = "okay";
+};
+
+&ams_ps {
+ status = "okay";
+};
+
+&ams_pl {
+ status = "okay";
+};
+
+&xilinx_drm {
+ status = "okay";
+};
+
+&xlnx_dp {
+ status = "okay";
+ phy-names = "dp-phy0", "dp-phy1";
+ phys = <&lane1 PHY_TYPE_DP 0 3 27000000>, <&lane0 PHY_TYPE_DP 1 3 27000000>;
+};
+
+&xlnx_dp_sub {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm0 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_card {
+ status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP ZCU106
+ *
+ * (C) Copyright 2016, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ model = "ZynqMP ZCU106 RevA";
+ compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &dcc;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ sw19 {
+ label = "sw19";
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ linux,code = <108>; /* down */
+ gpio-key,wakeup;
+ autorepeat;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat_led {
+ label = "heartbeat";
+ gpios = <&gpio 23 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&can1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+ status = "okay";
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem3 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gem3_default>;
+ phy0: phy@c {
+ reg = <0xc>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ ti,rxctrl-strap-worka;
+ };
+};
+
+&gpio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+
+ tca6416_u97: gpio@20 {
+ /*
+ * Enable all GTs to out from U-Boot
+ * i2c mw 20 6 0 - setup IO to output
+ * i2c mw 20 2 ef - setup output values on pins 0-7
+ * i2c mw 20 3 ff - setup output values on pins 10-17
+ */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller; /* interrupt not connected */
+ #gpio-cells = <2>;
+ /*
+ * IRQ not connected
+ * Lines:
+ * 0 - SFP_SI5328_INT_ALM
+ * 1 - HDMI_SI5328_INT_ALM
+ * 5 - IIC_MUX_RESET_B
+ * 6 - GEM3_EXP_RESET_B
+ * 10 - FMC_HPC0_PRSNT_M2C_B
+ * 11 - FMC_HPC1_PRSNT_M2C_B
+ * 2-4, 7, 12-17 - not connected
+ */
+ };
+
+ tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * IRQ not connected
+ * Lines:
+ * 0 - VCCPSPLL_EN
+ * 1 - MGTRAVCC_EN
+ * 2 - MGTRAVTT_EN
+ * 3 - VCCPSDDRPLL_EN
+ * 4 - MIO26_PMU_INPUT_LS
+ * 5 - PL_PMBUS_ALERT
+ * 6 - PS_PMBUS_ALERT
+ * 7 - MAXIM_PMBUS_ALERT
+ * 10 - PL_DDR4_VTERM_EN
+ * 11 - PL_DDR4_VPP_2V5_EN
+ * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
+ * 13 - PS_DIMM_SUSPEND_EN
+ * 14 - PS_DDR4_VTERM_EN
+ * 15 - PS_DDR4_VPP_2V5_EN
+ * 16 - 17 - not connected
+ */
+ };
+
+ i2cswitch@75 { /* u60 */
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c@0 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* PS_PMBUS */
+ ina226@40 { /* u76 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <5000>;
+ };
+ ina226@41 { /* u77 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ ina226@42 { /* u78 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ ina226@43 { /* u87 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ ina226@44 { /* u85 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>;
+ };
+ ina226@45 { /* u86 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ ina226@46 { /* u93 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <5000>;
+ };
+ ina226@47 { /* u88 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>;
+ };
+ ina226@4a { /* u15 */
+ compatible = "ti,ina226";
+ reg = <0x4a>;
+ shunt-resistor = <5000>;
+ };
+ ina226@4b { /* u92 */
+ compatible = "ti,ina226";
+ reg = <0x4b>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@1 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* PL_PMBUS */
+ ina226@40 { /* u79 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+ ina226@41 { /* u81 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ ina226@42 { /* u80 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ ina226@43 { /* u84 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ ina226@44 { /* u16 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>;
+ };
+ ina226@45 { /* u65 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ ina226@46 { /* u74 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <5000>;
+ };
+ ina226@47 { /* u75 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@2 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* MAXIM_PMBUS - 00 */
+ max15301@a { /* u46 */
+ compatible = "max15301";
+ reg = <0xa>;
+ };
+ max15303@b { /* u4 */
+ compatible = "max15303";
+ reg = <0xb>;
+ };
+ max15303@10 { /* u13 */
+ compatible = "max15303";
+ reg = <0x10>;
+ };
+ max15301@13 { /* u47 */
+ compatible = "max15301";
+ reg = <0x13>;
+ };
+ max15303@14 { /* u7 */
+ compatible = "max15303";
+ reg = <0x14>;
+ };
+ max15303@15 { /* u6 */
+ compatible = "max15303";
+ reg = <0x15>;
+ };
+ max15303@16 { /* u10 */
+ compatible = "max15303";
+ reg = <0x16>;
+ };
+ max15303@17 { /* u9 */
+ compatible = "max15303";
+ reg = <0x17>;
+ };
+ max15301@18 { /* u63 */
+ compatible = "max15301";
+ reg = <0x18>;
+ };
+ max15303@1a { /* u49 */
+ compatible = "max15303";
+ reg = <0x1a>;
+ };
+ max15303@1b { /* u8 */
+ compatible = "max15303";
+ reg = <0x1b>;
+ };
+ max15303@1d { /* u18 */
+ compatible = "max15303";
+ reg = <0x1d>;
+ };
+
+ max20751@72 { /* u95 */
+ compatible = "max20751";
+ reg = <0x72>;
+ };
+ max20751@73 { /* u96 */
+ compatible = "max20751";
+ reg = <0x73>;
+ };
+ };
+ /* Bus 3 is not connected */
+ };
+
+ /* FIXME PMOD - j160 */
+ /* FIXME MSP430F - u41 - not detected */
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+
+ /* FIXME PL i2c via PCA9306 - u45 */
+ /* FIXME MSP430 - u41 - not detected */
+ i2cswitch@74 { /* u34 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ i2c@0 { /* i2c mw 74 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /*
+ * IIC_EEPROM 1kB memory which uses 256B blocks
+ * where every block has different address.
+ * 0 - 256B address 0x54
+ * 256B - 512B address 0x55
+ * 512B - 768B address 0x56
+ * 768B - 1024B address 0x57
+ */
+ eeprom@54 { /* u23 */
+ compatible = "at,24c08";
+ reg = <0x54>;
+ };
+ };
+ i2c@1 { /* i2c mw 74 0 2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ si5341: clock-generator1@36 { /* SI5341 - u69 */
+ compatible = "si5341";
+ reg = <0x36>;
+ };
+
+ };
+ i2c@2 { /* i2c mw 74 0 4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ si570_1: clock-generator2@5d { /* USER SI570 - u42 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <300000000>;
+ clock-frequency = <300000000>;
+ };
+ };
+ i2c@3 { /* i2c mw 74 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ si570_2: clock-generator3@5d { /* USER MGT SI570 - u56 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>; /* copy from zc702 */
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+ i2c@4 { /* i2c mw 74 0 10 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ si5328: clock-generator4@69 {/* SI5328 - u20 */
+ compatible = "silabs,si5328";
+ reg = <0x69>;
+ };
+ };
+ i2c@5 { /* i2c mw 74 0 11 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>; /* FAN controller */
+ temp@4c {/* lm96163 - u128 */
+ compatible = "national,lm96163";
+ reg = <0x4c>; /* FIXME */
+ };
+ };
+ /* 6 - 7 unconnected */
+ };
+
+ i2cswitch@75 {
+ compatible = "nxp,pca9548"; /* u135 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* HPC0_IIC */
+ };
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* HPC1_IIC */
+ };
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* SYSMON */
+ };
+ i2c@3 { /* i2c mw 75 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* DDR4 SODIMM */
+ dev@19 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x19>;
+ };
+ dev@30 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x30>;
+ };
+ dev@35 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x35>;
+ };
+ dev@36 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x36>;
+ };
+ dev@51 { /* u-boot detection - maybe SPD */
+ compatible = "xxx";
+ reg = <0x51>;
+ };
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* SEP 3 */
+ };
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* SEP 2 */
+ };
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* SEP 1 */
+ };
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* SEP 0 */
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ is-dual = <1>;
+ flash@0 {
+ compatible = "m25p80"; /* 32MB */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ /* SATA OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&lane3 PHY_TYPE_SATA 1 1 125000000>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhci1_default>;
+ xlnx,mio_bank = <1>;
+};
+
+&serdes {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+ snps,usb3_lpm_capable;
+ phy-names = "usb3-phy";
+ phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>;
+};
+
+&xilinx_drm {
+ status = "okay";
+};
+
+&xlnx_dp {
+ status = "okay";
+ phy-names = "dp-phy0", "dp-phy1";
+ phys = <&lane1 PHY_TYPE_DP 0 3 27000000>, <&lane0 PHY_TYPE_DP 1 3 27000000>;
+};
+
+&xlnx_dp_sub {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm0 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_card {
+ status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
+
+&pinctrl0 {
+ status = "okay";
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_3_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_3_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ mux {
+ groups = "gpio0_14_grp", "gpio0_15_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_14_grp", "gpio0_15_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_default: i2c1-default {
+ mux {
+ groups = "i2c1_4_grp";
+ function = "i2c1";
+ };
+
+ conf {
+ groups = "i2c1_4_grp";
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ mux {
+ groups = "gpio0_16_grp", "gpio0_17_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_16_grp", "gpio0_17_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_uart0_default: uart0-default {
+ mux {
+ groups = "uart0_4_grp";
+ function = "uart0";
+ };
+
+ conf {
+ groups = "uart0_4_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO18";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO19";
+ bias-disable;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_5_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_5_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO21";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO20";
+ bias-disable;
+ };
+ };
+
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO52", "MIO53", "MIO55";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+ "MIO60", "MIO61", "MIO62", "MIO63";
+ bias-disable;
+ };
+ };
+
+ pinctrl_gem3_default: gem3-default {
+ mux {
+ function = "ethernet3";
+ groups = "ethernet3_0_grp";
+ };
+
+ conf {
+ groups = "ethernet3_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+ "MIO75";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+ "MIO69";
+ bias-disable;
+ low-power-enable;
+ };
+
+ mux-mdio {
+ function = "mdio3";
+ groups = "mdio3_0_grp";
+ };
+
+ conf-mdio {
+ groups = "mdio3_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_can1_default: can1-default {
+ mux {
+ function = "can1";
+ groups = "can1_6_grp";
+ };
+
+ conf {
+ groups = "can1_6_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO25";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO24";
+ bias-disable;
+ };
+ };
+
+ pinctrl_sdhci1_default: sdhci1-default {
+ mux {
+ groups = "sdio1_0_grp";
+ function = "sdio1";
+ };
+
+ conf {
+ groups = "sdio1_0_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "sdio1_0_cd_grp";
+ function = "sdio1_cd";
+ };
+
+ conf-cd {
+ groups = "sdio1_0_cd_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux-wp {
+ groups = "sdio1_0_wp_grp";
+ function = "sdio1_wp";
+ };
+
+ conf-wp {
+ groups = "sdio1_0_wp_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+ };
+
+ pinctrl_gpio_default: gpio-default {
+ mux {
+ function = "gpio0";
+ groups = "gpio0_22_grp", "gpio0_23_grp";
+ };
+
+ conf {
+ groups = "gpio0_22_grp", "gpio0_23_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ mux-msp {
+ function = "gpio0";
+ groups = "gpio0_13_grp", "gpio0_38_grp";
+ };
+
+ conf-msp {
+ groups = "gpio0_13_grp", "gpio0_38_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ io-standard = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-pull-up {
+ pins = "MIO22";
+ bias-pull-up;
+ };
+
+ conf-pull-none {
+ pins = "MIO13", "MIO23", "MIO38";
+ bias-disable;
+ };
+ };
+};
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
+ operating-points-v2 = <&cpu_opp_table>;
reg = <0x0>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x1>;
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x2>;
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x3>;
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ idle-states {
+ entry-method = "arm,psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x40000000>;
+ local-timer-stop;
+ entry-latency-us = <300>;
+ exit-latency-us = <600>;
+ min-residency-us = <10000>;
+ };
+ };
+ };
+
+ cpu_opp_table: cpu_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp00 {
+ opp-hz = /bits/ 64 <1199999988>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <500000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <599999994>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <500000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <399999996>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <500000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <299999997>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <500000>;
+ };
+ };
+
+ dcc: dcc {
+ compatible = "arm,dcc";
+ status = "disabled";
+ u-boot,dm-pre-reloc;
+ };
+
+ power-domains {
+ compatible = "xlnx,zynqmp-genpd";
+
+ pd_usb0: pd-usb0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x16>;
+ };
+
+ pd_usb1: pd-usb1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x17>;
+ };
+
+ pd_sata: pd-sata {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1c>;
+ };
+
+ pd_spi0: pd-spi0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x23>;
+ };
+
+ pd_spi1: pd-spi1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x24>;
+ };
+
+ pd_uart0: pd-uart0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x21>;
+ };
+
+ pd_uart1: pd-uart1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x22>;
+ };
+
+ pd_eth0: pd-eth0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1d>;
+ };
+
+ pd_eth1: pd-eth1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1e>;
+ };
+
+ pd_eth2: pd-eth2 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1f>;
+ };
+
+ pd_eth3: pd-eth3 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x20>;
+ };
+
+ pd_i2c0: pd-i2c0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x25>;
+ };
+
+ pd_i2c1: pd-i2c1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x26>;
+ };
+
+ pd_dp: pd-dp {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x29>;
+ };
+
+ pd_gdma: pd-gdma {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2a>;
+ };
+
+ pd_adma: pd-adma {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2b>;
+ };
+
+ pd_ttc0: pd-ttc0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x18>;
+ };
+
+ pd_ttc1: pd-ttc1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x19>;
+ };
+
+ pd_ttc2: pd-ttc2 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1a>;
+ };
+
+ pd_ttc3: pd-ttc3 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1b>;
+ };
+
+ pd_sd0: pd-sd0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x27>;
+ };
+
+ pd_sd1: pd-sd1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x28>;
+ };
+
+ pd_nand: pd-nand {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2c>;
+ };
+
+ pd_qspi: pd-qspi {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2d>;
+ };
+
+ pd_gpio: pd-gpio {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2e>;
+ };
+
+ pd_can0: pd-can0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2f>;
+ };
+
+ pd_can1: pd-can1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x30>;
+ };
+
+ pd_pcie: pd-pcie {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x3b>;
+ };
+
+ pd_gpu: pd-gpu {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x3a 0x14 0x15>;
};
};
method = "smc";
};
+ pmufw: firmware {
+ compatible = "xlnx,zynqmp-pm";
+ method = "smc";
+ interrupt-parent = <&gic>;
+ interrupts = <0 35 4>;
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
<1 10 0xf08>;
};
- amba_apu {
+ edac {
+ compatible = "arm,cortex-a53-edac";
+ };
+
+ fpga_full: fpga-full {
+ compatible = "fpga-region";
+ fpga-mgr = <&pcap>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ };
+
+ nvmem_firmware {
+ compatible = "xlnx,zynqmp-nvmem-fw";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ soc_revision: soc_revision@0 {
+ reg = <0x0 0x4>;
+ };
+ };
+
+ pcap: pcap {
+ compatible = "xlnx,zynqmp-pcap-fpga";
+ };
+
+ rst: reset-controller {
+ compatible = "xlnx,zynqmp-reset";
+ #reset-cells = <1>;
+ };
+
+ xlnx_dp_snd_card: dp_snd_card {
+ compatible = "xlnx,dp-snd-card";
+ status = "disabled";
+ xlnx,dp-snd-pcm = <&xlnx_dp_snd_pcm0>, <&xlnx_dp_snd_pcm1>;
+ xlnx,dp-snd-codec = <&xlnx_dp_snd_codec0>;
+ };
+
+ xlnx_dp_snd_codec0: dp_snd_codec0 {
+ compatible = "xlnx,dp-snd-codec";
+ status = "disabled";
+ clock-names = "aud_clk";
+ };
+
+ xlnx_dp_snd_pcm0: dp_snd_pcm0 {
+ compatible = "xlnx,dp-snd-pcm";
+ status = "disabled";
+ dmas = <&xlnx_dpdma 4>;
+ dma-names = "tx";
+ };
+
+ xlnx_dp_snd_pcm1: dp_snd_pcm1 {
+ compatible = "xlnx,dp-snd-pcm";
+ status = "disabled";
+ dmas = <&xlnx_dpdma 5>;
+ dma-names = "tx";
+ };
+
+ xilinx_drm: xilinx_drm {
+ compatible = "xlnx,drm";
+ status = "disabled";
+ xlnx,encoder-slave = <&xlnx_dp>;
+ xlnx,connector-type = "DisplayPort";
+ xlnx,dp-sub = <&xlnx_dp_sub>;
+ planes {
+ xlnx,pixel-format = "rgb565";
+ plane0 {
+ dmas = <&xlnx_dpdma 3>;
+ dma-names = "dma0";
+ };
+ plane1 {
+ dmas = <&xlnx_dpdma 0>,
+ <&xlnx_dpdma 1>,
+ <&xlnx_dpdma 2>;
+ dma-names = "dma0", "dma1", "dma2";
+ };
+ };
+ };
+
+ amba_apu: amba_apu@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
amba: amba {
compatible = "simple-bus";
+ u-boot,dm-pre-reloc;
#address-cells = <2>;
#size-cells = <2>;
ranges;
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&pd_can0>;
};
can1: can@ff070000 {
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&pd_can1>;
+ };
+
+ cci: cci@fd6e0000 {
+ compatible = "arm,cci-400";
+ reg = <0x0 0xfd6e0000 0x0 0x9000>;
+ ranges = <0x0 0x0 0xfd6e0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pmu@9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 123 4>,
+ <0 123 4>,
+ <0 123 4>,
+ <0 123 4>,
+ <0 123 4>;
+ };
+ };
+
+ /* GDMA */
+ fpd_dma_chan1: dma@fd500000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd500000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 124 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14e8>;
+ power-domains = <&pd_gdma>;
+ };
+
+ fpd_dma_chan2: dma@fd510000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd510000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 125 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14e9>;
+ power-domains = <&pd_gdma>;
+ };
+
+ fpd_dma_chan3: dma@fd520000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd520000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 126 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ea>;
+ power-domains = <&pd_gdma>;
+ };
+
+ fpd_dma_chan4: dma@fd530000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd530000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 127 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14eb>;
+ power-domains = <&pd_gdma>;
+ };
+
+ fpd_dma_chan5: dma@fd540000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd540000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 128 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ec>;
+ power-domains = <&pd_gdma>;
+ };
+
+ fpd_dma_chan6: dma@fd550000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd550000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 129 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ed>;
+ power-domains = <&pd_gdma>;
+ };
+
+ fpd_dma_chan7: dma@fd560000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd560000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 130 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ee>;
+ power-domains = <&pd_gdma>;
+ };
+
+ fpd_dma_chan8: dma@fd570000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd570000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 131 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x14ef>;
+ power-domains = <&pd_gdma>;
+ };
+
+ gpu: gpu@fd4b0000 {
+ status = "disabled";
+ compatible = "arm,mali-400", "arm,mali-utgard";
+ reg = <0x0 0xfd4b0000 0x0 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>;
+ interrupt-names = "IRQGP", "IRQGPMMU", "IRQPP0", "IRQPPMMU0", "IRQPP1", "IRQPPMMU1";
+ clock-names = "gpu", "gpu_pp0", "gpu_pp1";
+ power-domains = <&pd_gpu>;
+ };
+
+ /* LPDDMA default allows only secured access. inorder to enable
+ * These dma channels, Users should ensure that these dma
+ * Channels are allowed for non secure access.
+ */
+ lpd_dma_chan1: dma@ffa80000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ clock-names = "clk_main", "clk_apb";
+ reg = <0x0 0xffa80000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 77 4>;
+ xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ /* iommus = <&smmu 0x868>; */
+ power-domains = <&pd_adma>;
+ };
+
+ lpd_dma_chan2: dma@ffa90000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ clock-names = "clk_main", "clk_apb";
+ reg = <0x0 0xffa90000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 78 4>;
+ xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ /* iommus = <&smmu 0x869>; */
+ power-domains = <&pd_adma>;
+ };
+
+ lpd_dma_chan3: dma@ffaa0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ clock-names = "clk_main", "clk_apb";
+ reg = <0x0 0xffaa0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 79 4>;
+ xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ /* iommus = <&smmu 0x86a>; */
+ power-domains = <&pd_adma>;
+ };
+
+ lpd_dma_chan4: dma@ffab0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ clock-names = "clk_main", "clk_apb";
+ reg = <0x0 0xffab0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 80 4>;
+ xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ /* iommus = <&smmu 0x86b>; */
+ power-domains = <&pd_adma>;
+ };
+
+ lpd_dma_chan5: dma@ffac0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ clock-names = "clk_main", "clk_apb";
+ reg = <0x0 0xffac0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 81 4>;
+ xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ /* iommus = <&smmu 0x86c>; */
+ power-domains = <&pd_adma>;
+ };
+
+ lpd_dma_chan6: dma@ffad0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ clock-names = "clk_main", "clk_apb";
+ reg = <0x0 0xffad0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 82 4>;
+ xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ /* iommus = <&smmu 0x86d>; */
+ power-domains = <&pd_adma>;
+ };
+
+ lpd_dma_chan7: dma@ffae0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ clock-names = "clk_main", "clk_apb";
+ reg = <0x0 0xffae0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 83 4>;
+ xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ /* iommus = <&smmu 0x86e>; */
+ power-domains = <&pd_adma>;
+ };
+
+ lpd_dma_chan8: dma@ffaf0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ clock-names = "clk_main", "clk_apb";
+ reg = <0x0 0xffaf0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 84 4>;
+ xlnx,bus-width = <64>;
+ #stream-id-cells = <1>;
+ /* iommus = <&smmu 0x86f>; */
+ power-domains = <&pd_adma>;
+ };
+
+ mc: memory-controller@fd070000 {
+ compatible = "xlnx,zynqmp-ddrc-2.40a";
+ reg = <0x0 0xfd070000 0x0 0x30000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 112 4>;
+ };
+
+ nand0: nand@ff100000 {
+ compatible = "arasan,nfc-v3p10";
+ status = "disabled";
+ reg = <0x0 0xff100000 0x0 0x1000>;
+ clock-names = "clk_sys", "clk_flash";
+ interrupt-parent = <&gic>;
+ interrupts = <0 14 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x872>;
+ power-domains = <&pd_nand>;
};
gem0: ethernet@ff0b0000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynqmp-gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 57 4>, <0 57 4>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x874>;
+ power-domains = <&pd_eth0>;
};
gem1: ethernet@ff0c0000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynqmp-gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 59 4>, <0 59 4>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x875>;
+ power-domains = <&pd_eth1>;
};
gem2: ethernet@ff0d0000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynqmp-gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 61 4>, <0 61 4>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x876>;
+ power-domains = <&pd_eth2>;
};
gem3: ethernet@ff0e0000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynqmp-gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 63 4>, <0 63 4>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x877>;
+ power-domains = <&pd_eth3>;
};
gpio: gpio@ff0a0000 {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0xff0a0000 0x0 0x1000>;
+ gpio-controller;
+ power-domains = <&pd_gpio>;
};
i2c0: i2c@ff020000 {
- compatible = "cdns,i2c-r1p10";
+ compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
reg = <0x0 0xff020000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_i2c0>;
};
i2c1: i2c@ff030000 {
- compatible = "cdns,i2c-r1p10";
+ compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 18 4>;
reg = <0x0 0xff030000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_i2c1>;
+ };
+
+ ocm: memory-controller@ff960000 {
+ compatible = "xlnx,zynqmp-ocmc-1.0";
+ reg = <0x0 0xff960000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 10 4>;
};
pcie: pcie@fd0e0000 {
device_type = "pci";
interrupt-parent = <&gic>;
interrupts = <0 118 4>,
- <0 117 4>,
- <0 116 4>,
- <0 115 4>, /* MSI_1 [63...32] */
- <0 114 4>; /* MSI_0 [31...0] */
- interrupt-names = "misc", "dummy", "intx",
- "msi1", "msi0";
+ <0 117 4>,
+ <0 116 4>,
+ <0 115 4>, /* MSI_1 [63...32] */
+ <0 114 4>; /* MSI_0 [31...0] */
+ interrupt-names = "misc","dummy","intx", "msi1", "msi0";
msi-parent = <&pcie>;
reg = <0x0 0xfd0e0000 0x0 0x1000>,
<0x0 0xfd480000 0x0 0x1000>,
<0x80 0x00000000 0x0 0x1000000>;
reg-names = "breg", "pcireg", "cfg";
- ranges = <0x02000000 0x00000000 0xe0000000 0x00000000
- 0xe0000000 0x00000000 0x10000000
- /* non-prefetchable memory */
- 0x43000000 0x00000006 0x00000000 0x00000006
- 0x00000000 0x00000002 0x00000000>;
- /* prefetchable memory */
+ ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000 /* non-prefetchable memory */
+ 0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+ power-domains = <&pd_pcie>;
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
};
};
+ qspi: spi@ff0f0000 {
+ u-boot,dm-pre-reloc;
+ compatible = "xlnx,zynqmp-qspi-1.0";
+ status = "disabled";
+ clock-names = "ref_clk", "pclk";
+ interrupts = <0 15 4>;
+ interrupt-parent = <&gic>;
+ num-cs = <1>;
+ reg = <0x0 0xff0f0000 0x0 0x1000>,
+ <0x0 0xc0000000 0x0 0x8000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x873>;
+ power-domains = <&pd_qspi>;
+ };
+
+ rtc: rtc@ffa60000 {
+ compatible = "xlnx,zynqmp-rtc";
+ status = "disabled";
+ reg = <0x0 0xffa60000 0x0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 26 4>, <0 27 4>;
+ interrupt-names = "alarm", "sec";
+ calibration = <0x8000>;
+ };
+
+ serdes: zynqmp_phy@fd400000 {
+ compatible = "xlnx,zynqmp-psgtr";
+ status = "disabled";
+ reg = <0x0 0xfd400000 0x0 0x40000>,
+ <0x0 0xfd3d0000 0x0 0x1000>,
+ <0x0 0xff5e0000 0x0 0x1000>;
+ reg-names = "serdes", "siou", "lpd";
+ nvmem-cells = <&soc_revision>;
+ nvmem-cell-names = "soc_revision";
+ resets = <&rst 16>, <&rst 59>, <&rst 60>,
+ <&rst 61>, <&rst 62>, <&rst 63>,
+ <&rst 64>, <&rst 3>, <&rst 29>,
+ <&rst 30>, <&rst 31>, <&rst 32>;
+ reset-names = "sata_rst", "usb0_crst", "usb1_crst",
+ "usb0_hibrst", "usb1_hibrst", "usb0_apbrst",
+ "usb1_apbrst", "dp_rst", "gem0_rst",
+ "gem1_rst", "gem2_rst", "gem3_rst";
+ lane0: lane0 {
+ #phy-cells = <4>;
+ };
+ lane1: lane1 {
+ #phy-cells = <4>;
+ };
+ lane2: lane2 {
+ #phy-cells = <4>;
+ };
+ lane3: lane3 {
+ #phy-cells = <4>;
+ };
+ };
+
sata: ahci@fd0c0000 {
compatible = "ceva,ahci-1v84";
status = "disabled";
reg = <0x0 0xfd0c0000 0x0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
+ power-domains = <&pd_sata>;
+ #stream-id-cells = <4>;
+ iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
+ <&smmu 0x4c2>, <&smmu 0x4c3>;
+ /* dma-coherent; */
};
sdhci0: sdhci@ff160000 {
- compatible = "arasan,sdhci-8.9a";
+ u-boot,dm-pre-reloc;
+ compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 48 4>;
reg = <0x0 0xff160000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ xlnx,device_id = <0>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x870>;
+ power-domains = <&pd_sd0>;
+ nvmem-cells = <&soc_revision>;
+ nvmem-cell-names = "soc_revision";
};
sdhci1: sdhci@ff170000 {
- compatible = "arasan,sdhci-8.9a";
+ u-boot,dm-pre-reloc;
+ compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 49 4>;
reg = <0x0 0xff170000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ xlnx,device_id = <1>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x871>;
+ power-domains = <&pd_sd1>;
+ nvmem-cells = <&soc_revision>;
+ nvmem-cell-names = "soc_revision";
+ };
+
+ pinctrl0: pinctrl@ff180000 {
+ compatible = "xlnx,pinctrl-zynqmp";
+ status = "disabled";
+ reg = <0x0 0xff180000 0x0 0x1000>;
};
smmu: smmu@fd800000 {
compatible = "arm,mmu-500";
reg = <0x0 0xfd800000 0x0 0x20000>;
+ #iommu-cells = <1>;
+ status = "disabled";
#global-interrupts = <1>;
interrupt-parent = <&gic>;
- interrupts = <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>;
+ interrupts = <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>;
};
spi0: spi@ff040000 {
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_spi0>;
};
spi1: spi@ff050000 {
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_spi1>;
};
ttc0: timer@ff110000 {
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
reg = <0x0 0xff110000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&pd_ttc0>;
};
ttc1: timer@ff120000 {
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
reg = <0x0 0xff120000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&pd_ttc1>;
};
ttc2: timer@ff130000 {
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
reg = <0x0 0xff130000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&pd_ttc2>;
};
ttc3: timer@ff140000 {
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
reg = <0x0 0xff140000 0x0 0x1000>;
timer-width = <32>;
+ power-domains = <&pd_ttc3>;
};
uart0: serial@ff000000 {
- compatible = "cdns,uart-r1p8";
+ u-boot,dm-pre-reloc;
+ compatible = "cdns,uart-r1p12", "xlnx,xuartps";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&pd_uart0>;
};
uart1: serial@ff010000 {
- compatible = "cdns,uart-r1p8";
+ u-boot,dm-pre-reloc;
+ compatible = "cdns,uart-r1p12", "xlnx,xuartps";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&pd_uart1>;
};
- usb0: usb@fe200000 {
- compatible = "snps,dwc3";
+ usb0: usb0@ff9d0000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
status = "disabled";
- interrupt-parent = <&gic>;
- interrupts = <0 65 4>;
- reg = <0x0 0xfe200000 0x0 0x40000>;
- clock-names = "clk_xin", "clk_ahb";
+ compatible = "xlnx,zynqmp-dwc3";
+ reg = <0x0 0xff9d0000 0x0 0x100>;
+ clock-names = "bus_clk", "ref_clk";
+ power-domains = <&pd_usb0>;
+ ranges;
+ nvmem-cells = <&soc_revision>;
+ nvmem-cell-names = "soc_revision";
+
+ dwc3_0: dwc3@fe200000 {
+ compatible = "snps,dwc3";
+ status = "disabled";
+ reg = <0x0 0xfe200000 0x0 0x40000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 65 4>, <0 69 4>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x860>;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,refclk_fladj;
+ snps,enable_guctl1_resume_quirk;
+ snps,enable_guctl1_ipd_quirk;
+ snps,xhci-stream-quirk;
+ /* dma-coherent; */
+ };
};
- usb1: usb@fe300000 {
- compatible = "snps,dwc3";
+ usb1: usb1@ff9e0000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
status = "disabled";
- interrupt-parent = <&gic>;
- interrupts = <0 70 4>;
- reg = <0x0 0xfe300000 0x0 0x40000>;
- clock-names = "clk_xin", "clk_ahb";
+ compatible = "xlnx,zynqmp-dwc3";
+ reg = <0x0 0xff9e0000 0x0 0x100>;
+ clock-names = "bus_clk", "ref_clk";
+ power-domains = <&pd_usb1>;
+ ranges;
+ nvmem-cells = <&soc_revision>;
+ nvmem-cell-names = "soc_revision";
+
+ dwc3_1: dwc3@fe300000 {
+ compatible = "snps,dwc3";
+ status = "disabled";
+ reg = <0x0 0xfe300000 0x0 0x40000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 70 4>, <0 74 4>;
+ #stream-id-cells = <1>;
+ iommus = <&smmu 0x861>;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,refclk_fladj;
+ snps,enable_guctl1_resume_quirk;
+ snps,enable_guctl1_ipd_quirk;
+ snps,xhci-stream-quirk;
+ /* dma-coherent; */
+ };
};
watchdog0: watchdog@fd4d0000 {
reg = <0x0 0xfd4d0000 0x0 0x1000>;
timeout-sec = <10>;
};
+
+ xilinx_ams: ams@ffa50000 {
+ compatible = "xlnx,zynqmp-ams";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 56 4>;
+ interrupt-names = "ams-irq";
+ reg = <0x0 0xffa50000 0x0 0x800>;
+ reg-names = "ams-base";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #io-channel-cells = <1>;
+ ranges;
+
+ ams_ps: ams_ps@ffa50800 {
+ compatible = "xlnx,zynqmp-ams-ps";
+ status = "disabled";
+ reg = <0x0 0xffa50800 0x0 0x400>;
+ };
+
+ ams_pl: ams_pl@ffa50c00 {
+ compatible = "xlnx,zynqmp-ams-pl";
+ status = "disabled";
+ reg = <0x0 0xffa50c00 0x0 0x400>;
+ };
+ };
+
+ xlnx_dp: dp@fd4a0000 {
+ compatible = "xlnx,v-dp";
+ status = "disabled";
+ reg = <0x0 0xfd4a0000 0x0 0x1000>;
+ interrupts = <0 119 4>;
+ interrupt-parent = <&gic>;
+ clock-names = "aclk", "aud_clk";
+ power-domains = <&pd_dp>;
+ xlnx,dp-version = "v1.2";
+ xlnx,max-lanes = <2>;
+ xlnx,max-link-rate = <540000>;
+ xlnx,max-bpc = <16>;
+ xlnx,enable-ycrcb;
+ xlnx,colormetry = "rgb";
+ xlnx,bpc = <8>;
+ xlnx,audio-chan = <2>;
+ xlnx,dp-sub = <&xlnx_dp_sub>;
+ xlnx,max-pclock-frequency = <300000>;
+ };
+
+ xlnx_dp_sub: dp_sub@fd4aa000 {
+ compatible = "xlnx,dp-sub";
+ status = "disabled";
+ reg = <0x0 0xfd4aa000 0x0 0x1000>,
+ <0x0 0xfd4ab000 0x0 0x1000>,
+ <0x0 0xfd4ac000 0x0 0x1000>;
+ reg-names = "blend", "av_buf", "aud";
+ xlnx,output-fmt = "rgb";
+ xlnx,vid-fmt = "yuyv";
+ xlnx,gfx-fmt = "rgb565";
+ power-domains = <&pd_dp>;
+ };
+
+ xlnx_dpdma: dma@fd4c0000 {
+ compatible = "xlnx,dpdma";
+ status = "disabled";
+ reg = <0x0 0xfd4c0000 0x0 0x1000>;
+ interrupts = <0 122 4>;
+ interrupt-parent = <&gic>;
+ clock-names = "axi_clk";
+ power-domains = <&pd_dp>;
+ dma-channels = <6>;
+ #dma-cells = <1>;
+ dma-video0channel {
+ compatible = "xlnx,video0";
+ };
+ dma-video1channel {
+ compatible = "xlnx,video1";
+ };
+ dma-video2channel {
+ compatible = "xlnx,video2";
+ };
+ dma-graphicschannel {
+ compatible = "xlnx,graphics";
+ };
+ dma-audio0channel {
+ compatible = "xlnx,audio0";
+ };
+ dma-audio1channel {
+ compatible = "xlnx,audio1";
+ };
+ };
};
};
projects / zynq / linux.git / commitdiff