ARM: dts: zynq: Add support for Z-turn board

Add a dts for MYIR Z-turn board and respective target in Makefile.

Signed-off-by: Anton Gerasimov <tossel@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 37a3de760d40f4f27ad4cdbad5ff41973bdda75c..1fa68c7eed113dd6f9f0f8ede547d35e34dbd4e5 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1109,6 +1109,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
        zynq-zc770-xm012.dtb \
        zynq-zc770-xm013.dtb \
        zynq-zed.dtb \
+       zynq-zturn.dtb \
        zynq-zybo.dtb \
        zynq-zybo-z7.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \

diff --git a/arch/arm/boot/dts/zynq-zturn.dts b/arch/arm/boot/dts/zynq-zturn.dts
new file mode 100644 (file)
index 0000000..b25beae
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zturn.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
+ *  Copyright (C) 2017 Alexander Graf <agraf@suse.de>
+ *
+ *  Based on zynq-zed.dts which is:
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *
+ */
+
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+       model = "Zynq Z-Turn MYIR Board";
+       compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
+
+       aliases {
+               ethernet0 = &gem0;
+               serial0 = &uart1;
+               serial1 = &uart0;
+               mmc0 = &sdhci0;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x40000000>;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               usr-led1 {
+                       label = "usr-led1";
+                       gpios = <&gpio0 0x0 0x1>;
+                       default-state = "off";
+               };
+
+               usr-led2 {
+                       label = "usr-led2";
+                       gpios = <&gpio0 0x9 0x1>;
+                       default-state = "off";
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               autorepeat;
+               K1 {
+                       label = "K1";
+                       gpios = <&gpio0 0x32 0x1>;
+                       linux,code = <0x66>;
+                       gpio-key,wakeup;
+                       autorepeat;
+               };
+       };
+};
+
+&clkc {
+       ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+       status = "okay";
+       phy-mode = "rgmii-id";
+       phy-handle = <&ethernet_phy>;
+
+       ethernet_phy: ethernet-phy@0 {
+               reg = <0x0>;
+       };
+};
+
+&sdhci0 {
+       status = "okay";
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+       dr_mode = "host";
+};
+
+&can0 {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       stlm75@49 {
+               status = "okay";
+               compatible = "lm75";
+               reg = <0x49>;
+       };
+
+       accelerometer@53 {
+               compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x";
+               reg = <0x53>;
+               interrupt-parent = <&intc>;
+               interrupts = <0x0 0x1e 0x4>;
+       };
+};