--- /dev/null
+/*
+ * Xilinx Zynq DDR ECC Driver
+ * This driver is based on ppc4xx_edac.c drivers
+ *
+ * Copyright (C) 2012 - 2013 Xilinx, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/edac.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "edac_core.h"
+
+/* Number of cs_rows needed per memory controller */
+#define ZYNQ_EDAC_NR_CSROWS 1
+
+/* Number of channels per memory controller */
+#define ZYNQ_EDAC_NR_CHANS 1
+
+/* Granularity of reported error in bytes */
+#define ZYNQ_EDAC_ERROR_GRAIN 1
+
+#define ZYNQ_EDAC_MESSAGE_SIZE 256
+
+/* Zynq DDR memory controller registers that are relevant to ECC */
+#define ZYNQ_DDRC_CONTROL_REG_OFFSET 0x0 /* Control regsieter */
+#define ZYNQ_DDRC_T_ZQ_REG_OFFSET 0xA4 /* ZQ register */
+
+/* ECC control register */
+#define ZYNQ_DDRC_ECC_CONTROL_REG_OFFSET 0xC4
+/* ECC log register */
+#define ZYNQ_DDRC_ECC_CE_LOG_REG_OFFSET 0xC8
+/* ECC address register */
+#define ZYNQ_DDRC_ECC_CE_ADDR_REG_OFFSET 0xCC
+/* ECC data[31:0] register */
+#define ZYNQ_DDRC_ECC_CE_DATA_31_0_REG_OFFSET 0xD0
+
+/* Uncorrectable error info regsisters */
+#define ZYNQ_DDRC_ECC_UE_LOG_REG_OFFSET 0xDC /* ECC control register */
+#define ZYNQ_DDRC_ECC_UE_ADDR_REG_OFFSET 0xE0 /* ECC log register */
+#define ZYNQ_DDRC_ECC_UE_DATA_31_0_REG_OFFSET 0xE4 /* ECC address register */
+
+#define ZYNQ_DDRC_ECC_STAT_REG_OFFSET 0xF0 /* ECC statistics register */
+#define ZYNQ_DDRC_ECC_SCRUB_REG_OFFSET 0xF4 /* ECC scrub register */
+
+/* Control regsiter bitfield definitions */
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK 0xC
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT 2
+
+#define ZYNQ_DDRCTL_WDTH_16 1
+#define ZYNQ_DDRCTL_WDTH_32 0
+
+/* ZQ register bitfield definitions */
+#define ZYNQ_DDRC_T_ZQ_REG_DDRMODE_MASK 0x2
+
+/* ECC control register bitfield definitions */
+#define ZYNQ_DDRC_ECCCTRL_CLR_CE_ERR 0x2
+#define ZYNQ_DDRC_ECCCTRL_CLR_UE_ERR 0x1
+
+/* ECC correctable/uncorrectable error log register definitions */
+#define ZYNQ_DDRC_ECC_CE_LOGREG_VALID 0x1
+#define ZYNQ_DDRC_ECC_CE_LOGREG_BITPOS_MASK 0xFE
+#define ZYNQ_DDRC_ECC_CE_LOGREG_BITPOS_SHIFT 1
+
+/* ECC correctable/uncorrectable error address register definitions */
+#define ZYNQ_DDRC_ECC_ADDRREG_COL_MASK 0xFFF
+#define ZYNQ_DDRC_ECC_ADDRREG_ROW_MASK 0xFFFF000
+#define ZYNQ_DDRC_ECC_ADDRREG_ROW_SHIFT 12
+#define ZYNQ_DDRC_ECC_ADDRREG_BANK_MASK 0x70000000
+#define ZYNQ_DDRC_ECC_ADDRREG_BANK_SHIFT 28
+
+/* ECC statistic regsiter definitions */
+#define ZYNQ_DDRC_ECC_STATREG_UECOUNT_MASK 0xFF
+#define ZYNQ_DDRC_ECC_STATREG_CECOUNT_MASK 0xFF00
+#define ZYNQ_DDRC_ECC_STATREG_CECOUNT_SHIFT 8
+
+/* ECC scrub regsiter definitions */
+#define ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK 0x7
+#define ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED 0x4
+
+/**
+ * struct ecc_error_info - ECC error log information
+ * @row: Row number
+ * @col: Column number
+ * @bank: Bank number
+ * @bitpos: Bit position
+ * @data: Data causing the error
+ */
+struct ecc_error_info {
+ u32 row;
+ u32 col;
+ u32 bank;
+ u32 bitpos;
+ u32 data;
+};
+
+/**
+ * struct zynq_ecc_status - ECC status information to report
+ * @ce_count: Correctable error count
+ * @ue_count: Uncorrectable error count
+ * @ceinfo: Correctable error log information
+ * @ueinfo: Uncorrectable error log information
+ */
+struct zynq_ecc_status {
+ u32 ce_count;
+ u32 ue_count;
+ struct ecc_error_info ceinfo;
+ struct ecc_error_info ueinfo;
+};
+
+/**
+ * struct zynq_edac_priv - Zynq DDR memory controller private instance data
+ * @baseaddr: Base address of the DDR controller
+ * @ce_count: Correctable Error count
+ * @ue_count: Uncorrectable Error count
+ */
+struct zynq_edac_priv {
+ void __iomem *baseaddr;
+ u32 ce_count;
+ u32 ue_count;
+};
+
+/**
+ * zynq_edac_geterror_info - Get the current ecc error info
+ * @base: Pointer to the base address of the ddr memory controller
+ * @perrstatus: Pointer to the zynq ecc status structure
+ *
+ * This routine determines there is any ecc error or not
+ *
+ * Returns zero if there is no error otherwise returns 1
+ */
+static int zynq_edac_geterror_info(void __iomem *base,
+ struct zynq_ecc_status *perrstatus)
+{
+ u32 regval;
+ u32 clearval = 0;
+
+ regval = readl(base + ZYNQ_DDRC_ECC_STAT_REG_OFFSET) &
+ (ZYNQ_DDRC_ECC_STATREG_UECOUNT_MASK |
+ ZYNQ_DDRC_ECC_STATREG_CECOUNT_MASK);
+
+ if (regval == 0)
+ return 0;
+
+ memset(perrstatus, 0, sizeof(struct zynq_ecc_status));
+
+ perrstatus->ce_count = (regval & ZYNQ_DDRC_ECC_STATREG_CECOUNT_MASK) >>
+ ZYNQ_DDRC_ECC_STATREG_CECOUNT_SHIFT;
+ perrstatus->ue_count = (regval & ZYNQ_DDRC_ECC_STATREG_UECOUNT_MASK);
+
+ if (perrstatus->ce_count) {
+ regval = readl(base + ZYNQ_DDRC_ECC_CE_LOG_REG_OFFSET);
+ if (regval & ZYNQ_DDRC_ECC_CE_LOGREG_VALID) {
+ perrstatus->ceinfo.bitpos = (regval &
+ ZYNQ_DDRC_ECC_CE_LOGREG_BITPOS_MASK) >>
+ ZYNQ_DDRC_ECC_CE_LOGREG_BITPOS_SHIFT;
+ regval = readl(base +
+ ZYNQ_DDRC_ECC_CE_ADDR_REG_OFFSET);
+ perrstatus->ceinfo.row = (regval &
+ ZYNQ_DDRC_ECC_ADDRREG_ROW_MASK) >>
+ ZYNQ_DDRC_ECC_ADDRREG_ROW_SHIFT;
+ perrstatus->ceinfo.col = (regval &
+ ZYNQ_DDRC_ECC_ADDRREG_COL_MASK);
+ perrstatus->ceinfo.bank = (regval &
+ ZYNQ_DDRC_ECC_ADDRREG_BANK_MASK) >>
+ ZYNQ_DDRC_ECC_ADDRREG_BANK_SHIFT;
+ perrstatus->ceinfo.data = readl(base +
+ ZYNQ_DDRC_ECC_CE_DATA_31_0_REG_OFFSET);
+ edac_dbg(3, "ce bitposition: %d data: %d\n",
+ perrstatus->ceinfo.bitpos,
+ perrstatus->ceinfo.data);
+ }
+ clearval = ZYNQ_DDRC_ECCCTRL_CLR_CE_ERR;
+ }
+
+ if (perrstatus->ue_count) {
+ regval = readl(base + ZYNQ_DDRC_ECC_UE_LOG_REG_OFFSET);
+ if (regval & ZYNQ_DDRC_ECC_CE_LOGREG_VALID) {
+ regval = readl(base +
+ ZYNQ_DDRC_ECC_UE_ADDR_REG_OFFSET);
+ perrstatus->ueinfo.row = (regval &
+ ZYNQ_DDRC_ECC_ADDRREG_ROW_MASK) >>
+ ZYNQ_DDRC_ECC_ADDRREG_ROW_SHIFT;
+ perrstatus->ueinfo.col = (regval &
+ ZYNQ_DDRC_ECC_ADDRREG_COL_MASK);
+ perrstatus->ueinfo.bank = (regval &
+ ZYNQ_DDRC_ECC_ADDRREG_BANK_MASK) >>
+ ZYNQ_DDRC_ECC_ADDRREG_BANK_SHIFT;
+ perrstatus->ueinfo.data = readl(base +
+ ZYNQ_DDRC_ECC_UE_DATA_31_0_REG_OFFSET);
+ }
+ clearval |= ZYNQ_DDRC_ECCCTRL_CLR_UE_ERR;
+ }
+
+ writel(clearval, base + ZYNQ_DDRC_ECC_CONTROL_REG_OFFSET);
+ writel(0x0, base + ZYNQ_DDRC_ECC_CONTROL_REG_OFFSET);
+
+ return 1;
+}
+
+/**
+ * zynq_edac_generate_message - Generate interpreted ECC status message
+ * @mci: Pointer to the edac memory controller instance
+ * @perrstatus: Pointer to the zynq ecc status structure
+ * @buffer: Pointer to the buffer in which to generate the
+ * message
+ * @size: The size, in bytes, of space available in buffer
+ *
+ * This routine generates to the provided buffer the portion of the
+ * driver-unique report message associated with the ECC register of
+ * the specified ECC status.
+ */
+static void zynq_edac_generate_message(const struct mem_ctl_info *mci,
+ struct zynq_ecc_status *perrstatus, char *buffer,
+ size_t size)
+{
+ struct ecc_error_info *pinfo = NULL;
+
+ if (perrstatus->ce_count > 0)
+ pinfo = &perrstatus->ceinfo;
+ else
+ pinfo = &perrstatus->ueinfo;
+
+ snprintf(buffer, ZYNQ_EDAC_MESSAGE_SIZE,
+ "DDR ECC error type :%s Row %d Bank %d Col %d ",
+ (perrstatus->ce_count > 0) ? "CE" : "UE", pinfo->row,
+ pinfo->bank, pinfo->col);
+}
+
+/**
+ * zynq_edac_handle_error - Handle controller error types CE and UE
+ * @mci: Pointer to the edac memory controller instance
+ * @perrstatus: Pointer to the zynq ecc status structure
+ *
+ * This routine handles an xilinx,ps7-ddrc controller ECC correctable error.
+ */
+static void zynq_edac_handle_error(struct mem_ctl_info *mci,
+ struct zynq_ecc_status *perrstatus)
+{
+ char message[ZYNQ_EDAC_MESSAGE_SIZE];
+
+ zynq_edac_generate_message(mci, perrstatus, &message[0],
+ ZYNQ_EDAC_MESSAGE_SIZE);
+
+ if (perrstatus->ce_count)
+ edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
+ perrstatus->ce_count, 0, 0, 0, 0, 0, -1,
+ &message[0], "");
+ else
+ edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
+ perrstatus->ue_count, 0, 0, 0, 0, 0, -1,
+ &message[0], "");
+}
+
+/**
+ * zynq_edac_check - Check controller for ECC errors
+ * @mci: Pointer to the edac memory controller instance
+ *
+ * This routine is used to check and post ECC errors and is called by
+ * the EDAC polling thread
+ */
+static void zynq_edac_check(struct mem_ctl_info *mci)
+{
+ struct zynq_edac_priv *priv = mci->pvt_info;
+ struct zynq_ecc_status errstatus;
+ int status;
+
+ status = zynq_edac_geterror_info(priv->baseaddr, &errstatus);
+ if (status) {
+ priv->ce_count += errstatus.ce_count;
+ priv->ue_count += errstatus.ue_count;
+
+ if (errstatus.ce_count) {
+ zynq_edac_handle_error(mci, &errstatus);
+ errstatus.ce_count = 0;
+ }
+ if (errstatus.ue_count) {
+ zynq_edac_handle_error(mci, &errstatus);
+ errstatus.ue_count = 0;
+ }
+ edac_dbg(3, "total error count ce %d ue %d\n",
+ priv->ce_count, priv->ue_count);
+ }
+}
+
+/**
+ * zynq_edac_get_dtype - Return the controller memory width
+ * @base: Pointer to the ddr memory contoller base address
+ *
+ * This routine returns the EDAC device type width appropriate for the
+ * current controller configuration.
+ *
+ * Returns a device type width enumeration.
+ */
+static enum dev_type zynq_edac_get_dtype(void __iomem *base)
+{
+ enum dev_type dt;
+ u32 width;
+
+ width = readl(base + ZYNQ_DDRC_CONTROL_REG_OFFSET);
+ width = (width & ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK) >>
+ ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT;
+
+ switch (width) {
+ case ZYNQ_DDRCTL_WDTH_16:
+ dt = DEV_X2;
+ break;
+ case ZYNQ_DDRCTL_WDTH_32:
+ dt = DEV_X4;
+ break;
+ default:
+ dt = DEV_UNKNOWN;
+ }
+
+ return dt;
+}
+
+/**
+ * zynq_edac_get_eccstate - Return the controller ecc enable/disable status
+ * @base: Pointer to the ddr memory contoller base address
+ *
+ * This routine returns the ECC enable/diable status for the xlnx,ps7-ddrc
+ * controller
+ *
+ * Returns a ecc status boolean i.e true/false - enabled/disabled.
+ */
+static bool zynq_edac_get_eccstate(void __iomem *base)
+{
+ enum dev_type dt;
+ u32 ecctype;
+ bool state = false;
+
+ dt = zynq_edac_get_dtype(base);
+
+ ecctype = (readl(base + ZYNQ_DDRC_ECC_SCRUB_REG_OFFSET) &
+ ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK);
+
+ if ((ecctype == ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED)
+ && (dt == DEV_X2)) {
+ state = true;
+ writel(0x0, base + ZYNQ_DDRC_ECC_CONTROL_REG_OFFSET);
+ } else {
+ state = false;
+ }
+
+ return state;
+}
+
+/**
+ * zynq_edac_get_memsize - Return the size of the attched mmeory device
+ *
+ * This routine returns the size of the system memory by reading the sysinfo
+ * information
+ *
+ * Returns the memory size in bytes
+ */
+static u32 zynq_edac_get_memsize(void)
+{
+ struct sysinfo inf;
+
+ /* Reading the system memory size from the global meminfo structure */
+ si_meminfo(&inf);
+
+ return inf.totalram * inf.mem_unit;
+}
+
+/**
+ * zynq_edac_get_mtype - Returns controller memory type
+ * @base: pointer to the zynq ecc status structure
+ *
+ * This routine returns the EDAC memory type appropriate for the
+ * current controller configuration.
+ *
+ * Returns a memory type enumeration.
+ */
+static enum mem_type zynq_edac_get_mtype(void __iomem *base)
+{
+ enum mem_type mt;
+ u32 memtype;
+
+ memtype = readl(base + ZYNQ_DDRC_T_ZQ_REG_OFFSET);
+
+ if (memtype & ZYNQ_DDRC_T_ZQ_REG_DDRMODE_MASK)
+ mt = MEM_DDR3;
+ else
+ mt = MEM_DDR2;
+
+ return mt;
+}
+
+/**
+ * zynq_edac_init_csrows - Initialize the cs row data
+ * @mci: Pointer to the edac memory controller instance
+ *
+ * This routine initializes the chip select rows associated
+ * with the EDAC memory controller instance
+ *
+ * Returns 0 if OK; otherwise, -EINVAL if the memory bank size
+ * configuration cannot be determined.
+ */
+static int zynq_edac_init_csrows(struct mem_ctl_info *mci)
+{
+ struct csrow_info *csi;
+ struct dimm_info *dimm;
+ struct zynq_edac_priv *priv = mci->pvt_info;
+ u32 size;
+ int row, j;
+
+ for (row = 0; row < mci->nr_csrows; row++) {
+ csi = mci->csrows[row];
+ size = zynq_edac_get_memsize();
+
+ for (j = 0; j < csi->nr_channels; j++) {
+ dimm = csi->channels[j]->dimm;
+ dimm->edac_mode = EDAC_FLAG_SECDED;
+ dimm->mtype = zynq_edac_get_mtype(priv->baseaddr);
+ dimm->nr_pages =
+ (size >> PAGE_SHIFT) / csi->nr_channels;
+ dimm->grain = ZYNQ_EDAC_ERROR_GRAIN;
+ dimm->dtype = zynq_edac_get_dtype(priv->baseaddr);
+ }
+
+ }
+
+ return 0;
+}
+
+/**
+ * zynq_edac_mc_init - Initialize driver instance
+ * @mci: Pointer to the edac memory controller instance
+ * @pdev: Pointer to the platform_device struct
+ *
+ * This routine performs initialization of the EDAC memory controller
+ * instance and related driver-private data associated with the
+ * xlnx,ps7-ddrc memory controller the instance is bound to.
+ *
+ * Returns 0 if OK; otherwise, < 0 on error.
+ */
+static int zynq_edac_mc_init(struct mem_ctl_info *mci,
+ struct platform_device *pdev)
+{
+ int status;
+ struct zynq_edac_priv *priv;
+
+ /* Initial driver pointers and private data */
+ mci->pdev = &pdev->dev;
+ priv = mci->pvt_info;
+ platform_set_drvdata(pdev, mci);
+
+ /* Initialize controller capabilities and configuration */
+ mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+ mci->scrub_cap = SCRUB_HW_SRC;
+ /* Check the scrub setting from the controller */
+ mci->scrub_mode = SCRUB_NONE;
+
+ mci->edac_cap = EDAC_FLAG_SECDED;
+ /* Initialize strings */
+ mci->ctl_name = "zynq_ddr_controller";
+ mci->dev_name = dev_name(&pdev->dev);
+ mci->mod_name = "zynq_edac";
+ mci->mod_ver = "1";
+
+ /* Initialize callbacks */
+ edac_op_state = EDAC_OPSTATE_POLL;
+ mci->edac_check = zynq_edac_check;
+ mci->ctl_page_to_phys = NULL;
+
+ /*
+ * Initialize the MC control structure 'csrows' table
+ * with the mapping and control information.
+ */
+ status = zynq_edac_init_csrows(mci);
+ if (status)
+ pr_err("Failed to initialize rows!\n");
+
+ return status;
+}
+
+/**
+ * zynq_edac_mc_probe - Check controller and bind driver
+ * @pdev: Pointer to the platform_device struct
+ *
+ * This routine probes a specific xilinx,ps7-ddrc controller
+ * instance for binding with the driver.
+ *
+ * Returns 0 if the controller instance was successfully bound to the
+ * driver; otherwise, < 0 on error.
+ */
+static int zynq_edac_mc_probe(struct platform_device *pdev)
+{
+ struct mem_ctl_info *mci;
+ struct edac_mc_layer layers[2];
+ struct zynq_edac_priv *priv;
+ int rc;
+ struct resource *res;
+ void __iomem *baseaddr;
+
+ if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL))
+ return -ENOMEM;
+
+ /* Get the data from the platform device */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ baseaddr = devm_ioremap_resource(&pdev->dev, res);
+ if (baseaddr == NULL) {
+ dev_err(&pdev->dev, "devm ioremap failed\n");
+ return -ENOMEM;
+ }
+
+ /* Check for the ecc enable status */
+ if (zynq_edac_get_eccstate(baseaddr) == false) {
+ rc = -ENXIO;
+ dev_err(&pdev->dev, "ecc not enabled\n");
+ goto iounmap;
+ }
+
+ /*
+ * At this point, we know ECC is enabled, allocate an EDAC
+ * controller instance and perform the appropriate
+ * initialization.
+ */
+ layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+ layers[0].size = ZYNQ_EDAC_NR_CSROWS;
+ layers[0].is_virt_csrow = true;
+ layers[1].type = EDAC_MC_LAYER_CHANNEL;
+ layers[1].size = ZYNQ_EDAC_NR_CHANS;
+ layers[1].is_virt_csrow = false;
+
+ mci = edac_mc_alloc(pdev->id, ARRAY_SIZE(layers), layers,
+ sizeof(struct zynq_edac_priv));
+ if (mci == NULL) {
+ rc = -ENOMEM;
+ pr_err("Failed memory allocation for mci instance!\n");
+ goto iounmap;
+ }
+
+ priv = mci->pvt_info;
+ priv->baseaddr = baseaddr;
+ rc = zynq_edac_mc_init(mci, pdev);
+ if (rc) {
+ pr_err("Failed to initialize instance!\n");
+ goto free_edac_mc;
+ }
+
+ /*
+ * We have a valid, initialized EDAC instance bound to the
+ * controller. Attempt to register it with the EDAC subsystem
+ */
+ rc = edac_mc_add_mc(mci);
+ if (rc) {
+ dev_err(&pdev->dev, "failed to register with EDAC core\n");
+ goto del_edac_mc;
+ }
+
+ devres_close_group(&pdev->dev, NULL);
+
+ return rc;
+
+del_edac_mc:
+ edac_mc_del_mc(&pdev->dev);
+free_edac_mc:
+ edac_mc_free(mci);
+iounmap:
+ devres_release_group(&pdev->dev, NULL);
+
+ return rc;
+}
+
+/**
+ * zynq_edac_mc_remove - Unbind driver from controller
+ * @pdev: Pointer to the platform_device struct
+ *
+ * This routine unbinds the EDAC memory controller instance associated
+ * with the specified xilinx,ps7-ddrc controller described by the
+ * OpenFirmware device tree node passed as a parameter.
+ *
+ * Unconditionally returns 0.
+ */
+static int zynq_edac_mc_remove(struct platform_device *pdev)
+{
+ struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+ edac_mc_del_mc(&pdev->dev);
+ edac_mc_free(mci);
+
+ return 0;
+}
+
+/* Device tree node type and compatible tuples this driver can match on */
+static struct of_device_id zynq_edac_match[] = {
+ { .compatible = "xlnx,ps7-ddrc-1.00.a", },
+ { /* end of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, zynq_edac_match);
+
+static struct platform_driver zynq_edac_mc_driver = {
+ .driver = {
+ .name = "zynq-edac",
+ .owner = THIS_MODULE,
+ .of_match_table = zynq_edac_match,
+ },
+ .probe = zynq_edac_mc_probe,
+ .remove = zynq_edac_mc_remove,
+};
+
+module_platform_driver(zynq_edac_mc_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Zynq DDR ECC driver");
+MODULE_LICENSE("GPL v2");
projects / zynq / linux.git / commitdiff