3 # This program is free software: you can redistribute it and/or modify
4 # it under the terms of the GNU General Public License as published by
5 # the Free Software Foundation, either version 2 of the License, or
6 # (at your option) any later version.
8 # This program is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 # GNU General Public License for more details.
13 # You should have received a copy of the GNU General Public License
14 # along with this program. If not, see <http://www.gnu.org/licenses/>.
20 use warnings (exists $ENV{NOVABOOT_TEST} ? (FATAL => 'all') : ());
21 use Getopt::Long qw(GetOptionsFromString GetOptionsFromArray);
26 use Time::HiRes("usleep");
30 use POSIX qw(:errno_h sysconf);
31 use Cwd qw(getcwd abs_path);
37 my $invocation_dir = $ENV{PWD} || getcwd();
39 # We prefer using PWD, to use nicer paths names with symbolic links.
40 # However, when executed from 'make -C dir', PWD may contain the make
41 # invocation path, not the real invocation path with dir at the end.
43 if (abs_path($ENV{PWD}) ne abs_path(getcwd())) {
44 $invocation_dir = getcwd();
47 ## Configuration file handling
49 # Default configuration
50 $CFG::hypervisor = "";
51 $CFG::hypervisor_params = "serial";
52 $CFG::genisoimage = "genisoimage";
53 $CFG::qemu = 'qemu-system-i386 -cpu coreduo -smp 2';
54 $CFG::default_target = '';
57 "tud" => '--server=erwin.inf.tu-dresden.de:~sojka/boot/novaboot --rsync-flags="--chmod=Dg+s,ug+w,o-w,+rX --rsync-path=\"umask 002 && rsync\"" --grub --grub-prefix=(nd)/tftpboot/sojka/novaboot --grub-preamble="timeout 0" --concat --iprelay=141.76.48.80:2324 --scriptmod=s/\\\\bhostserial\\\\b/hostserialpci/g',
58 "novabox" => '--ssh=novabox@rtime.felk.cvut.cz',
59 "localhost" => '--scriptmod=s/console=tty[A-Z0-9,]+// --server=/boot/novaboot/$NAME --grub2 --grub-prefix=/boot/novaboot/$NAME --grub2-prolog=" set root=\'(hd0,msdos1)\'"',
60 "ryu" => '--uboot --uboot-init="mw f0000b00 \${psc_cfg}; sleep 1" --uboot-addr kernel=800000 --uboot-addr ramdisk=b00000 --uboot-addr fdt=7f0000',
61 "ryuglab" => '--target ryu --server=pc-sojkam.felk.cvut.cz:/srv/tftp --remote-cmd="ssh -tt pc-sojkam.felk.cvut.cz \"sterm -d -s 115200 /dev/ttyUSB0\""',
62 "ryulocal" => '--target ryu --dhcp-tftp --serial --reset-cmd="if which dtrrts; then dtrrts $NB_SERIAL 0 1; sleep 0.1; dtrrts $NB_SERIAL 1 1; fi"',
67 $const{linux}->{_SC_NPROCESSORS_CONF} = 83;
68 my $nproc = sysconf($const{$^O}->{_SC_NPROCESSORS_CONF});
70 $CFG::scons = "scons -j$nproc";
71 $CFG::make = "make -j$nproc";
79 package CFG; # Put config data into a separate namespace
85 die("ERROR: Failure compiling '$cfg' - $@");
86 } elsif (! defined($rc)) {
87 die("ERROR: Failure reading '$cfg' - $!");
89 die("ERROR: Failure processing '$cfg'");
92 $builddir = File::Spec->rel2abs($CFG::builddir, dirname($cfg)) if defined $CFG::builddir;
93 print STDERR "novaboot: Read $cfg\n";
98 # We don't use $0 here, because it points to the novaboot itself and
99 # not to the novaboot script. The problem with this approach is that
100 # when a script is run as "novaboot <options> <script>" then $ARGV[0]
101 # contains the first option. Hence the -f check.
102 my $dir = File::Spec->rel2abs($ARGV[0] && -f $ARGV[0] ? dirname($ARGV[0]) : '', $invocation_dir);
103 while ((-d $dir || -l $dir ) && $dir ne "/") {
104 push @cfgs, "$dir/.novaboot" if -r "$dir/.novaboot";
105 my @dirs = File::Spec->splitdir($dir);
106 $dir = File::Spec->catdir(@dirs[0..$#dirs-1]);
108 @cfgs = reverse @cfgs;
110 my $xdg_config_home = $ENV{'XDG_CONFIG_HOME'} || $ENV{'HOME'}.'/.config';
111 unshift(@cfgs, "$xdg_config_home/novaboot") if -r "$xdg_config_home/novaboot";
113 $dir = $ENV{'NOVABOOT_CONFIG_DIR'} || '/etc/novaboot.d';
114 if (opendir(my $dh, $dir)) {
115 my @etccfg = map { "$dir/$_" } grep { /^[-_a-zA-Z0-9]+$/ && -f "$dir/$_" } readdir($dh);
117 @etccfg = sort(@etccfg);
118 @cfgs = ( @etccfg, @cfgs );
121 my $cfg = $ENV{'NOVABOOT_CONFIG'};
122 Getopt::Long::Configure(qw/no_ignore_case pass_through/);
123 GetOptions ("config|c=s" => \$cfg);
124 read_config($_) foreach $cfg or @cfgs;
126 ## Command line handling
128 my $explicit_target = $ENV{'NOVABOOT_TARGET'};
129 GetOptions ("target|t=s" => \$explicit_target);
131 # Variables for command line options
132 my ($amt, @append, $bender, @chainloaders, $concat, $config_name_opt, $dhcp_tftp, $dump_opt, $dump_config, @exiton, $exiton_timeout, @expect_raw, $final_eol, $gen_only, $grub_config, $grub_prefix, $grub_preamble, $grub2_prolog, $grub2_config, $help, $ider, $interaction, $iprelay, $iprelay_cmd, $iso_image, $interactive, $kernel_opt, $make, $man, $netif, $no_file_gen, $off_opt, $on_opt, $pulsar, $pulsar_root, $qemu, $qemu_append, $qemu_flags_cmd, @remote_cmd, $remote_expect, $remote_expect_silent, $remote_expect_timeout, $reset, @reset_cmd, $reset_send, $rom_prefix, $rsync_flags, @scriptmod, $scons, $serial, $server, $stty, $tftp, $tftp_port, $uboot, %uboot_addr, $uboot_cmd, @uboot_init);
134 my ($target_reset, $target_power_on, $target_power_off);
136 # Default values of certain command line options
138 'kernel' => '${kernel_addr_r}',
139 'ramdisk' => '${ramdisk_addr_r}',
140 'fdt' => '${fdt_addr_r}',
143 $rom_prefix = 'rom://';
144 $stty = 'raw -crtscts -onlcr 115200';
145 $reset = 1; # Reset target by default
146 $interaction = 1; # Perform target interaction by default
149 $remote_expect_timeout = 180;
151 my @expect_seen = ();
155 push(@expect_seen, '-re') if $n eq "expect-re";
156 push(@expect_seen, $v);
162 unless (@expect_seen) { die("No --expect before --send"); }
163 my $ret = ($n eq "sendcont") ? exp_continue : 0;
164 unshift(@expect_raw, sub { shift->send(eval("\"$v\"")); $ret; });
165 unshift(@expect_raw, @expect_seen);
169 # Options which can be safely specified on the server (via --ssh),
170 # i.e. which cannot cause unwanted local code execution etc.
171 my %opt_spec_safe = (
172 "grub|g:s" => \$grub_config,
173 "grub-preamble=s"=> \$grub_preamble,
174 "grub2-prolog=s" => \$grub2_prolog,
175 "grub2:s" => \$grub2_config,
176 "prefix|grub-prefix=s" => \$grub_prefix,
177 "pulsar-root=s" => \$pulsar_root,
178 "pulsar|p:s" => \$pulsar,
179 "uboot-addr=s" => \%uboot_addr,
180 "uboot-cmd=s" => \$uboot_cmd,
181 "uboot-init=s" => sub { push @uboot_init, { command => $_[1] }; },
182 "uboot:s" => \$uboot,
188 "append|a=s" => \@append,
189 "bender|b" => \$bender,
190 "build-dir=s" => sub { my ($n, $v) = @_; $builddir = File::Spec->rel2abs($v); },
191 "concat" => \$concat,
192 "chainloader=s" => \@chainloaders,
193 "dhcp-tftp|d" => \$dhcp_tftp,
194 "dump" => \$dump_opt,
195 "dump-config" => \$dump_config,
196 "exiton=s" => \@exiton,
197 "exiton-timeout=i"=> \$exiton_timeout,
198 "exiton-re=s" => sub { my ($n, $v) = @_; push(@exiton, '-re', $v); },
199 "expect=s" => \&handle_expect,
200 "expect-re=s" => \&handle_expect,
201 "expect-raw=s" => sub { my ($n, $v) = @_; unshift(@expect_raw, eval($v)); },
202 "final-eol!" => \$final_eol,
203 "gen-only" => \$gen_only,
205 "interaction!" => \$interaction,
206 "iprelay=s" => \$iprelay,
207 "iprelay-cmd=s" => \$iprelay_cmd,
208 "iso:s" => \$iso_image,
209 "kernel|k=s" => \$kernel_opt,
210 "interactive|i" => \$interactive,
211 "name=s" => \$config_name_opt,
212 "make|m:s" => \$make,
213 "netif=s" => \$netif,
214 "no-file-gen" => \$no_file_gen,
217 "qemu|Q:s" => \$qemu,
218 "qemu-append=s" => \$qemu_append,
219 "qemu-flags|q=s" => \$qemu_flags_cmd,
220 "remote-cmd=s" => sub { @remote_cmd = ($_[1]); },
221 "remote-expect=s"=> \$remote_expect,
222 "remote-expect-silent=s"=> sub { $remote_expect=$_[1]; $remote_expect_silent=1; },
223 "remote-expect-timeout=i"=> \$remote_expect_timeout,
225 "reset-cmd=s" => sub { @reset_cmd = ($_[1]); },
226 "reset-send=s" => \$reset_send,
227 "rsync-flags=s" => \$rsync_flags,
228 "scons:s" => \$scons,
229 "scriptmod=s" => \@scriptmod,
230 "send=s" => \&handle_send,
231 "sendcont=s" => \&handle_send,
232 "serial|s:s" => \$serial,
233 "server:s" => \$server,
234 "ssh:s" => \&handle_novaboot_server,
235 "strip-rom" => sub { $rom_prefix = ''; },
238 "tftp-port=i" => \$tftp_port,
239 "no-uboot" => sub { undef $uboot; },
244 sub handle_novaboot_server
247 my $xdg_runtime_dir = $ENV{XDG_RUNTIME_DIR} || '/var/run';
248 my $ssh_ctl_path = "${xdg_runtime_dir}/novaboot$$";
250 @remote_cmd = ('ssh', '-tt', '-M', '-S', $ssh_ctl_path, $val, 'console');
251 $remote_expect = "novaboot-shell: Connected";
253 $rsync_flags = "--rsh='ssh -S \'${ssh_ctl_path}\''";
254 ($grub_prefix = $val) =~ s|(.*)@.*|\/$1\/| if index($val, '@') != -1;
255 @reset_cmd = ('ssh', '-tt', '-S', $ssh_ctl_path, $val, 'reset');
257 $target_power_off = sub { system_verbose('ssh', '-tt', '-S', $ssh_ctl_path, $val, 'off'); };
258 $target_power_on = sub { system_verbose('ssh', '-tt', '-S', $ssh_ctl_path, $val, 'on'); };
260 my $cmd = "ssh '${val}' get-config";
261 print STDERR "novaboot: Running: $cmd\n";
262 my @target_config = qx($cmd < /dev/null);
263 if ($?) { die("Cannot get target configuration from the server"); }
264 printf "novaboot: Received configuration from the server:%s\n", (!@target_config) ? " empty" : "";
265 foreach (@target_config) { chomp; print " $_\n"; }
267 my $p = Getopt::Long::Parser->new;
268 $p->configure(qw/no_ignore_case no_pass_through/);
269 $p->getoptionsfromarray(\@target_config, %opt_spec_safe) or die("Error processing configuration from the server");
271 if (scalar @target_config) { die "Unsuported configuration received from the server: ".join(", ", @target_config); }
274 # First process target options
276 my $t = defined($explicit_target) ? $explicit_target : $CFG::default_target;
278 Getopt::Long::Configure(qw/no_ignore_case pass_through/);
280 exists $CFG::targets{$t} or die("Unknown target '$t' (valid targets are: ".join(", ", sort keys(%CFG::targets)).")");
282 undef $explicit_target;
283 my ($ret, $remaining_args) = GetOptionsFromString ($CFG::targets{$t}, ("target|t=s" => \$explicit_target));
284 if (!$ret) { die "Error parsing target $t option"; }
285 push(@target_expanded, @$remaining_args);
286 $t = $explicit_target;
289 my @args = (@target_expanded, @ARGV);
290 print STDERR "novaboot: Effective options: @args\n";
292 Getopt::Long::Configure(qw/no_ignore_case no_pass_through/);
293 GetOptionsFromArray(\@target_expanded, %opt_spec) or die ("Error in target definition");
296 # Then process other command line options - some of them may override
297 # what was specified by the target
298 GetOptions %opt_spec or die("Error in command line arguments");
299 pod2usage(1) if $help;
300 pod2usage(-exitstatus => 0, -verbose => 2) if $man;
302 ### Dump sanitized configuration (if requested)
306 $Data::Dumper::Indent=1;
307 print "# This file is in perl syntax.\n";
308 foreach my $key(sort(keys(%CFG::))) { # See "Symbol Tables" in perlmod(1)
309 if (defined ${$CFG::{$key}}) { print Data::Dumper->Dump([${$CFG::{$key}}], ["*$key"]); }
310 if ( @{$CFG::{$key}}) { print Data::Dumper->Dump([\@{$CFG::{$key}}], ["*$key"]); }
311 if ( %{$CFG::{$key}}) { print Data::Dumper->Dump([\%{$CFG::{$key}}], ["*$key"]); }
317 ### Sanitize configuration
319 if ($interactive && !-t STDIN) {
320 die("novaboot: Interactive mode not supported when not on terminal");
323 if (defined $config_name_opt && scalar(@ARGV) > 1) { die "You cannot use --name with multiple scripts"; }
326 $iso_image //= ''; # IDE-R needs an ISO image
327 if (!defined $amt) { die "Error: --ider requires --amt"; }
331 my %input_opts = ('--iprelay' => \$iprelay,
332 '--iprelay-cmd'=> \$iprelay_cmd,
333 '--serial' => \$serial,
334 '--remote-cmd' => (@remote_cmd ? \$remote_cmd[0] : undef),
336 my @opts = grep(defined(${$input_opts{$_}}) , keys %input_opts);
338 die("novaboot: More than one target connection option: ".join(', ', @opts)) if scalar @opts > 1;
342 if (defined $serial) {
343 $serial ||= "/dev/ttyUSB0";
344 $ENV{NB_SERIAL} = $serial;
346 if (defined $grub_config) { $grub_config ||= "menu.lst"; }
347 if (defined $grub2_config) { $grub2_config ||= "grub.cfg"; }
349 ## Parse the novaboot script(s)
354 my ($modules, $variables, $generated, $copy, $chainload, $continuation) = ([], {}, [], []);
355 my $skip_reading = defined($on_opt) || defined($off_opt);
356 while (!$skip_reading && ($_ = <>)) {
357 if ($ARGV ne $last_fn) { # New script
358 die "Missing EOF in $last_fn" if $file;
359 die "Unfinished line in $last_fn" if $continuation;
361 push @scripts, { 'filename' => $ARGV,
362 'modules' => $modules = [],
363 'variables' => $variables = {},
364 'generated' => $generated = [],
365 'copy' => $copy = [],
366 'chainload' => $chainload = [],
371 next if /^#/ || /^\s*$/; # Skip comments and empty lines
373 $_ =~ s/^[[:space:]]*// if ($continuation);
375 if (/\\$/) { # Line continuation
376 $continuation .= substr($_, 0, length($_)-1);
380 if ($continuation) { # Last continuation line
381 $_ = $continuation . $_;
385 foreach my $mod(@scriptmod) { eval $mod; }
387 if ($file && $_ eq $EOF) { # Heredoc end
391 if ($file) { # Heredoc content
392 push @{$file}, "$_\n";
395 if (/^([A-Z_]+)=(.*)$/) { # Internal variable
396 $$variables{$1} = $2;
397 push(@exiton, $2) if ($1 eq "EXITON");
398 $interaction = $2 if ($1 eq "INTERACTION");
401 sub process_load_copy($) {
402 die("novaboot: '$last_fn' line $.: Missing file name\n") unless /^[^ <]+/;
403 if (/^([^ ]*)(.*?)[[:space:]]*<<([^ ]*)$/) { # Heredoc start
405 push @$generated, {filename => $1, content => $file};
409 if (/^([^ ]*)(.*?)[[:space:]]*< ?(.*)$/) { # Command substitution
410 push @$generated, {filename => $1, command => $3};
415 if (s/^load *//) { # Load line
416 push @$modules, process_load_copy($_);
419 if (s/^copy *//) { # Copy line
420 push @$copy, process_load_copy($_);
423 if (s/^chld *//) { # Chainload line
424 push @$chainload, process_load_copy($_);
427 if (/^run (.*)/) { # run line
428 push @$generated, {command => $1};
431 if (/^uboot(?::([0-9]+)s)? +(< *)?(.*)/) { # uboot line
432 # TODO: If U-Boot supports some interactive menu, it might
433 # make sense to store uboot lines per novaboot script.
434 my ($timeout, $redir, $string, $dest) = ($1, $2, $3);
435 if ($string =~ /(.*) *> *(.*)/) {
439 push @uboot_init, { command => $redir ? "" : $string,
440 system => $redir ? $string : "",
447 die("novaboot: Cannot parse script '$last_fn' line $.. Didn't you forget 'load' keyword?\n");
450 # print Dumper(\@scripts);
452 foreach my $script (@scripts) {
453 $modules = $$script{modules};
454 @$modules[0] =~ s/^[^ ]*/$kernel_opt/ if $kernel_opt;
455 @$modules[0] .= ' ' . join(' ', @append) if @append;
458 if (exists $variables->{KERNEL}) {
459 $kernel = $variables->{KERNEL};
461 if ($CFG::hypervisor) {
462 $kernel = $CFG::hypervisor . " ";
463 if (exists $variables->{HYPERVISOR_PARAMS}) {
464 $kernel .= $variables->{HYPERVISOR_PARAMS};
466 $kernel .= $CFG::hypervisor_params;
470 @$modules = ($kernel, @$modules) if $kernel;
471 @$modules = (@chainloaders, @$modules);
472 @$modules = ("bin/boot/bender", @$modules) if ($bender || defined $ENV{'NOVABOOT_BENDER'});
476 foreach my $script (@scripts) {
477 print join("\n", @{$$script{modules}})."\n";
484 sub generate_configs($$$) {
485 my ($base, $generated, $filename) = @_;
486 if ($base) { $base = "$base/"; };
487 foreach my $g(@$generated) {
488 if (exists $$g{content}) {
489 my $config = $$g{content};
490 my $fn = $$g{filename};
491 open(my $f, '>', $fn) || die("$fn: $!");
492 map { s|\brom://([^ ]*)|$rom_prefix$base$1|g; print $f "$_"; } @{$config};
494 print STDERR "novaboot: Created $fn\n";
495 } elsif (exists $$g{command} && ! $no_file_gen) {
496 $ENV{SRCDIR} = dirname(File::Spec->rel2abs( $filename, $invocation_dir ));
497 if (exists $$g{filename}) {
498 system_verbose("( $$g{command} ) > $$g{filename}");
500 system_verbose($$g{command});
506 sub generate_grub_config($$$$;$)
508 my ($filename, $title, $base, $modules_ref, $preamble) = @_;
509 if ($base) { $base = "$base/"; };
510 open(my $fg, '>', $filename) or die "$filename: $!";
511 print $fg "$preamble\n" if $preamble;
512 print $fg "title $title\n" if $title;
513 #print $fg "root $base\n"; # root doesn't really work for (nd)
515 foreach (@$modules_ref) {
518 my ($kbin, $kcmd) = split(' ', $_, 2);
519 $kcmd = '' if !defined $kcmd;
520 print $fg "kernel ${base}$kbin $kcmd\n";
522 s|\brom://([^ ]*)|$rom_prefix$base$1|g; # Translate rom:// files - needed for vdisk parameter of sigma0
523 print $fg "module $base$_\n";
527 print("novaboot: Created $builddir/$filename\n");
531 sub generate_syslinux_config($$$$)
533 my ($filename, $title, $base, $modules_ref) = @_;
534 if ($base && $base !~ /\/$/) { $base = "$base/"; };
535 open(my $fg, '>', $filename) or die "$filename: $!";
536 print $fg "LABEL $title\n";
537 #TODO print $fg "MENU LABEL $human_readable_title\n";
539 my ($kbin, $kcmd) = split(' ', @$modules_ref[0], 2);
541 if (system("file $kbin|grep 'Linux kernel'") == 0) {
542 my $initrd = @$modules_ref[1];
543 die('To many "load" lines for Linux kernel') if (scalar @$modules_ref > 2);
544 print $fg "LINUX $base$kbin\n";
545 print $fg "APPEND $kcmd\n";
546 print $fg "INITRD $base$initrd\n";
548 print $fg "KERNEL mboot.c32\n";
550 foreach (@$modules_ref) {
551 s|\brom://([^ ]*)|$rom_prefix$base$1|g; # Translate rom:// files - needed for vdisk parameter of sigma0
552 push @append, "$base$_";
553 print $fg "APPEND ".join(' --- ', @append)."\n";
556 #TODO print $fg "TEXT HELP\n";
557 #TODO print $fg "some help here\n";
558 #TODO print $fg "ENDTEXT\n";
560 print("novaboot: Created $builddir/$filename\n");
564 sub generate_grub2_config($$$$;$$)
566 my ($filename, $title, $base, $modules_ref, $preamble, $prolog) = @_;
567 if ($base && substr($base,-1,1) ne '/') { $base = "$base/"; };
568 open(my $fg, '>', $filename) or die "$filename: $!";
569 print $fg "$preamble\n" if $preamble;
570 $title ||= 'novaboot';
571 print $fg "menuentry $title {\n";
572 print $fg "$prolog\n" if $prolog;
574 foreach (@$modules_ref) {
577 my ($kbin, $kcmd) = split(' ', $_, 2);
578 $kcmd = '' if !defined $kcmd;
579 print $fg " multiboot ${base}$kbin $kcmd\n";
582 # GRUB2 doesn't pass filename in multiboot info so we have to duplicate it here
583 $_ = join(' ', ($args[0], @args));
584 s|\brom://|$rom_prefix|g; # We do not need to translate path for GRUB2
585 print $fg " module $base$_\n";
590 print("novaboot: Created $builddir/$filename\n");
594 sub generate_pulsar_config($$$)
596 my ($filename, $modules_ref, $chainload_ref) = @_;
597 open(my $fg, '>', $filename) or die "$filename: $!";
598 print $fg "root $pulsar_root\n" if defined $pulsar_root;
599 if (scalar(@$chainload_ref) > 0) {
600 print $fg "chld $$chainload_ref[0]\n";
604 foreach (@$modules_ref) {
607 ($kbin, $kcmd) = split(' ', $_, 2);
608 $kcmd = '' if !defined $kcmd;
611 s|\brom://|$rom_prefix|g;
612 print $fg "load $_\n";
615 # Put kernel as last - this is needed for booting Linux and has no influence on non-Linux OSes
616 print $fg "exec $kbin $kcmd\n";
619 print("novaboot: Created $builddir/$filename\n");
623 sub shell_cmd_string(@)
625 if (scalar(@_) == 1) {
628 return join(' ', map((/^[-_=a-zA-Z0-9\/\.\+]+$/ ? "$_" : "'$_'"), @_));
634 print STDERR "novaboot: Running: ".shell_cmd_string(@_)."\n";
636 exit(1); # should not be reached
641 print STDERR "novaboot: Running: ".shell_cmd_string(@_)."\n";
642 my $ret = system(@_);
643 if ($ret & 0x007f) { die("Command terminated by a signal"); }
644 if ($ret & 0xff00) {die("Command exit with non-zero exit code"); }
645 if ($ret) { die("Command failure $ret"); }
650 $str =~ s/^\s+|\s+$//g;
656 if (exists $variables->{WVDESC}) {
657 print STDERR "Testing \"$variables->{WVDESC}\" in $last_fn:\n";
658 } elsif ($last_fn =~ /\.wv$/) {
659 print STDERR "Testing \"all\" in $last_fn:\n";
662 ## Connect to the target and check whether it is not occupied
664 # We have to do this before file generation phase, because file
665 # generation is intermixed with file deployment phase and we want to
666 # check whether the target is not used by somebody else before
667 # deploying files. Otherwise, we may rewrite other user's files on a
670 my $exp; # Expect object to communicate with the target over serial line
672 sub kill_exp_on_signal() {
673 # Sometimes, under unclear circumstances (e.g. when running under
674 # both Jenkins and Robotframework), novaboot does not terminate
675 # console command when killed. The console is then blocked by the
676 # stale process forever. Theoretically, this should not happen,
677 # because when novaboot is killed, console command's controlling
678 # terminal sends SIGHUP to the console command and the command
679 # should terminate. It seems that at least SSH sometimes ignores
680 # HUP and does not terminate. The code below seems to work around
681 # that problem by killing the process immediately with SIGTERM,
682 # which is not ignored.
684 sub kill_console { kill TERM => $exp->pid if $exp->pid; die "Terminated by SIG$_[0]"; };
686 # For our Jenkins/Robotframework use case, it was sufficient to
687 # handle the TERM signal, but to be on the safe side, we also
688 # catch other signals.
689 $SIG{TERM} = \&kill_console;
690 $SIG{HUP} = \&kill_console;
691 $SIG{INT} = \&kill_console;
692 $SIG{QUIT} = \&kill_console;
696 my ($amt_user, $amt_password, $amt_host, $amt_port);
698 if (defined $iprelay || defined $iprelay_cmd) {
699 if (defined $iprelay) {
701 $iprelay =~ /([.0-9]+)(:([0-9]+))?/;
704 my $paddr = sockaddr_in($port, inet_aton($addr));
705 my $proto = getprotobyname('tcp');
706 socket($IPRELAY, PF_INET, SOCK_STREAM, $proto) || die "socket: $!";
707 print STDERR "novaboot: Connecting to IP relay... ";
708 connect($IPRELAY, $paddr) || die "connect: $!";
709 print STDERR "done\n";
710 $exp = Expect->init(\*$IPRELAY);
713 if (defined $iprelay_cmd) {
714 print STDERR "novaboot: Running: $iprelay_cmd\n";
717 $exp->spawn($iprelay_cmd);
718 kill_exp_on_signal();
722 print $exp "\xFF\xF6"; # AYT
723 my $connected = $exp->expect(20, # Timeout in seconds
724 '<iprelayd: connected>',
725 '-re', '<WEB51 HW[^>]*>')
726 || die "iprelay connection: " . ($! || "timeout");
731 my ($relay, $onoff) = @_;
732 die unless ($relay == 1 || $relay == 2);
734 my $cmd = ($relay == 1 ? 0x5 : 0x6) | ($onoff ? 0x20 : 0x10);
735 return "\xFF\xFA\x2C\x32".chr($cmd)."\xFF\xF0";
739 my ($relay, $onoff) = @_;
740 die unless ($relay == 1 || $relay == 2);
741 my $cmd = ($relay == 1 ? 0xdf : 0xbf) | ($onoff ? 0x00 : 0xff);
742 return "\xFF\xFA\x2C\x97".chr($cmd)."\xFF\xF0";
746 my ($relay, $onoff, $can_giveup) = @_;
747 my $confirmation = '';
749 print $exp relaycmd($relay, $onoff);
750 my $confirmed = $exp->expect(20, # Timeout in seconds
751 relayconf($relay, $onoff))
752 || die "iprelay command: " . ($! || "timeout");
755 print("Relay confirmation timeout - ignoring\n");
757 die "Relay confirmation timeout";
763 $target_reset = sub {
764 relay(2, 1, 1); # Reset the machine
769 $target_power_off = sub {
770 relay(1, 1); # Press power button
771 usleep(6000000); # Long press to switch off
775 $target_power_on = sub {
776 relay(1, 1); # Press power button
777 usleep(100000); # Short press
783 system_verbose("stty -F $serial $stty");
784 open($CONN, "+<", $serial) || die "open $serial: $!";
785 $exp = Expect->init(\*$CONN);
787 elsif (@remote_cmd) {
788 print STDERR "novaboot: Running: ".shell_cmd_string(@remote_cmd)."\n";
789 $exp = Expect->spawn(@remote_cmd);
790 kill_exp_on_signal();
792 elsif (defined $amt) {
793 require LWP::UserAgent;
794 require LWP::Authen::Digest;
797 my ($host, $username, $password, $schema, $className, $pstate) = @_;
798 #AMT numbers for PowerStateChange (MNI => bluescreen on windows;-)
799 my %pstates = ("on" => 2,
806 <s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope" xmlns:a="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:w="http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd">
807 <s:Header><a:To>http://$host:16992/wsman</a:To>
808 <w:ResourceURI s:mustUnderstand="true">$schema</w:ResourceURI>
809 <a:ReplyTo><a:Address s:mustUnderstand="true">http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous</a:Address></a:ReplyTo>
810 <a:Action s:mustUnderstand="true">$schema$className</a:Action>
811 <w:MaxEnvelopeSize s:mustUnderstand="true">153600</w:MaxEnvelopeSize>
812 <a:MessageID>uuid:709072C9-609C-4B43-B301-075004043C7C</a:MessageID>
813 <w:Locale xml:lang="en-US" s:mustUnderstand="false" />
814 <w:OperationTimeout>PT60.000S</w:OperationTimeout>
815 <w:SelectorSet><w:Selector Name="Name">Intel(r) AMT Power Management Service</w:Selector></w:SelectorSet>
817 <p:RequestPowerStateChange_INPUT xmlns:p="http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_PowerManagementService">
818 <p:PowerState>$pstates{$pstate}</p:PowerState>
819 <p:ManagedElement><a:Address>http://$host:16992/wsman</a:Address>
820 <a:ReferenceParameters><w:ResourceURI>http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_ComputerSystem</w:ResourceURI>
821 <w:SelectorSet><w:Selector Name="Name">ManagedSystem</w:Selector></w:SelectorSet>
822 </a:ReferenceParameters></p:ManagedElement>
823 </p:RequestPowerStateChange_INPUT>
824 </s:Body></s:Envelope>
829 my ($host, $username, $password, $content) = @_;
831 my $ua = LWP::UserAgent->new();
832 $ua->agent("novaboot");
834 my $req = HTTP::Request->new(POST => "http://$host:16992/wsman");
835 my $res = $ua->request($req);
836 die ("Unexpected AMT response: " . $res->status_line) unless $res->code == 401;
838 my ($realm) = $res->header("WWW-Authenticate") =~ /Digest realm="(.*?)"/;
839 $ua->credentials("$host:16992", $realm, $username => $password);
842 $req = HTTP::Request->new(POST => "http://$host:16992/wsman");
843 $req->content_type('application/x-www-form-urlencoded');
844 $req->content($content);
845 $res = $ua->request($req);
846 die ("AMT power change request failed: " . $res->status_line) unless $res->is_success;
847 $res->content() =~ /<g:ReturnValue>(\d+)<\/g:ReturnValue>/;
852 my ($host, $username, $password, $pstate)=@_;
853 my $schema="http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_PowerManagementService";
854 my $className="/RequestPowerStateChange";
855 my $content = genXML($host, $username, $password ,$schema, $className, $pstate);
856 return sendPOST($host, $username, $password, $content);
859 ($amt_user,$amt_password,$amt_host,$amt_port) = ($amt =~ /(?:(.*?)(?::(.*))?@)?([^:]*)(?::([0-9]*))?/);;
860 $amt_user ||= "admin";
861 $amt_password ||= $ENV{'AMT_PASSWORD'} || die "AMT password not specified";
862 $amt_host || die "AMT host not specified";
866 $target_power_off = sub {
868 my $result = powerChange($amt_host,$amt_user,$amt_password, "off");
869 die "AMT power off failed (ReturnValue $result)" if $result != 0;
872 $target_power_on = sub {
873 my $result = powerChange($amt_host,$amt_user,$amt_password, "on");
874 die "AMT power on failed (ReturnValue $result)" if $result != 0;
877 $target_reset = sub {
878 my $result = powerChange($amt_host,$amt_user,$amt_password, "reset");
880 print STDERR "Warning: Cannot reset $amt_host, trying power on. ";
881 $result = powerChange($amt_host,$amt_user,$amt_password, "on");
883 die "AMT reset failed (ReturnValue $result)" if $result != 0;
886 my $cmd = "amtterm -u $amt_user -p $amt_password $amt_host $amt_port";
887 print STDERR "novaboot: Running: $cmd\n" =~ s/\Q$amt_password\E/???/r;
888 $exp = Expect->spawn($cmd);
889 $exp->expect(10, "RUN_SOL") || die "Expect for 'RUN_SOL': " . ($! || "timeout");
893 if ($remote_expect) {
894 $exp || die("No serial line connection");
895 my $log = $exp->log_stdout;
896 if (defined $remote_expect_silent) {
899 $exp->expect($remote_expect_timeout >= 0 ? $remote_expect_timeout : undef,
900 $remote_expect) || die "Expect for '$remote_expect':" . ($! || "timeout");;
901 if (defined $remote_expect_silent) {
902 $exp->log_stdout($log);
903 print $exp->after() if $log;
908 $target_reset = sub {
909 system_verbose(@reset_cmd);
913 if (defined $reset_send) {
914 $target_reset = sub {
915 $reset_send =~ s/\\n/\n/g;
916 $exp->send($reset_send);
920 if (defined $on_opt && defined $target_power_on) {
924 if (defined $off_opt && defined $target_power_off) {
925 print STDERR "novaboot: Switching the target off...\n";
926 &$target_power_off();
930 $builddir ||= dirname(File::Spec->rel2abs( ${$scripts[0]}{filename})) if scalar @scripts;
931 if (defined $builddir) {
932 chdir($builddir) or die "Can't change directory to $builddir: $!";
933 print STDERR "novaboot: Entering directory `$builddir'\n";
935 $builddir = $invocation_dir;
938 ## File generation phase
939 my (%files_iso, $menu_iso, $filename);
940 my $config_name = '';
943 foreach my $script (@scripts) {
944 $filename = $$script{filename};
945 $modules = $$script{modules};
946 $generated = $$script{generated};
947 $variables = $$script{variables};
949 ($config_name = $filename) =~ s#.*/##;
950 $config_name = $config_name_opt if (defined $config_name_opt);
952 if (exists $variables->{BUILDDIR}) {
953 $builddir = File::Spec->rel2abs($variables->{BUILDDIR});
954 chdir($builddir) or die "Can't change directory to $builddir: $!";
955 print STDERR "novaboot: Entering directory `$builddir'\n";
959 $prefix = $grub_prefix;
960 $prefix =~ s/\$NAME/$config_name/;
961 $prefix =~ s/\$BUILDDIR/$builddir/;
963 # TODO: use $grub_prefix as first parameter if some switch is given
964 generate_configs('', $generated, $filename);
966 ### Generate bootloader configuration files
967 my @bootloader_configs;
968 push @bootloader_configs, generate_grub_config($grub_config, $config_name, $prefix, $modules, $grub_preamble) if (defined $grub_config);
969 push @bootloader_configs, generate_grub2_config($grub2_config, $config_name, $prefix, $modules, $grub_preamble, $grub2_prolog) if (defined $grub2_config);
970 push @bootloader_configs, generate_pulsar_config('config-'.($pulsar||'novaboot'), $modules, $chainload) if (defined $pulsar);
972 ### Run scons or make
975 push @all, @$modules;
977 push @all, @$chainload;
978 my @files = map({ ($file) = m/([^ ]*)/; $file; } @all);
980 # Filter-out generated files
981 my @to_build = grep({ my $file = $_; !scalar(grep($file eq ($$_{filename} || ''), @$generated)) } @files);
983 system_verbose($scons || $CFG::scons." ".join(" ", @to_build)) if (defined $scons);
984 system_verbose($make || $CFG::make ." ".join(" ", @to_build)) if (defined $make);
987 ### Copy files (using rsync)
988 if (defined $server && !defined($gen_only)) {
989 (my $real_server = $server) =~ s/\$NAME/$config_name/;
991 my ($hostname, $path) = split(":", $real_server, 2);
992 if (! defined $path) {
996 my $files = join(" ", map({ ($file) = m/([^ ]*)/; $file; } ( @$modules, @bootloader_configs, @$copy)));
997 map({ my $file = (split)[0]; die "$file: $!" if ! -f $file; } @$modules);
998 my $istty = -t STDOUT && ($ENV{'TERM'} || 'dumb') ne 'dumb';
999 my $progress = $istty ? "--progress" : "";
1001 system_verbose("rsync $progress -RLp $rsync_flags $files $real_server");
1002 if ($server =~ m|/\$NAME$| && $concat) {
1003 my $cmd = join("; ", map { "( cd $path/.. && cat */$_ > $_ )" } @bootloader_configs);
1004 system_verbose($hostname ? "ssh $hostname '$cmd'" : $cmd);
1009 ### Prepare ISO image generation
1010 if (defined $iso_image) {
1011 generate_configs("(cd)", $generated, $filename);
1013 generate_syslinux_config(\$menu, $config_name, "/", $modules);
1014 $menu_iso .= "$menu\n";
1015 map { ($file,undef) = split; $files_iso{$file} = 1; } @$modules;
1019 ## Generate ISO image
1020 if (defined $iso_image) {
1021 system_verbose("mkdir -p isolinux");
1024 if (-f '/usr/lib/ISOLINUX/isolinux.bin') {
1025 # Newer ISOLINUX version
1026 @files = qw(/usr/lib/ISOLINUX/isolinux.bin /usr/lib/syslinux/modules/bios/mboot.c32 /usr/lib/syslinux/modules/bios/libcom32.c32 /usr/lib/syslinux/modules/bios/menu.c32 /usr/lib/syslinux/modules/bios/ldlinux.c32);
1028 # Older ISOLINUX version
1029 @files = qw(/usr/lib/syslinux/isolinux.bin /usr/lib/syslinux/mboot.c32 /usr/lib/syslinux/menu.c32);
1031 system_verbose("cp @files isolinux");
1032 open(my $fh, ">isolinux/isolinux.cfg");
1034 print $fh "TIMEOUT 50\n";
1035 print $fh "DEFAULT menu\n";
1037 print $fh "DEFAULT $config_name\n";
1039 print $fh "$menu_iso";
1042 my $files = join(" ", map("$_=$_", (keys(%files_iso), 'isolinux/isolinux.cfg', map(s|.*/|isolinux/|r, @files))));
1043 $iso_image ||= "$config_name.iso";
1045 # Note: We use -U flag below to "Allow 'untranslated' filenames,
1046 # completely violating the ISO9660 standards". Without this
1047 # option, isolinux is not able to read files names for example
1049 system_verbose("$CFG::genisoimage -R -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -hide-rr-moved -U -o $iso_image -graft-points $files");
1050 print("ISO image created: $builddir/$iso_image\n");
1053 exit(0) if defined $gen_only;
1055 ## Boot the system using various methods and send serial output to stdout
1057 if (scalar(@scripts) > 1 && ( defined $dhcp_tftp || defined $serial || defined $iprelay)) {
1058 die "You cannot do this with multiple scripts simultaneously";
1061 if ($variables->{WVTEST_TIMEOUT}) {
1062 print STDERR "wvtest: timeout ", $variables->{WVTEST_TIMEOUT}, "\n";
1067 if (defined $qemu) {
1069 $qemu ||= $variables->{QEMU} || $CFG::qemu;
1070 my @qemu_flags = split(" ", $qemu);
1071 $qemu = shift(@qemu_flags);
1073 @qemu_flags = split(/ +/, trim($variables->{QEMU_FLAGS})) if exists $variables->{QEMU_FLAGS};
1074 @qemu_flags = split(/ +/, trim($qemu_flags_cmd)) if $qemu_flags_cmd;
1075 push(@qemu_flags, split(/ +/, trim($qemu_append || '')));
1077 if (defined $iso_image) {
1078 # Boot NOVA with grub (and test the iso image)
1079 push(@qemu_flags, ('-cdrom', $iso_image));
1081 # Boot NOVA without GRUB
1083 # Non-patched qemu doesn't like commas, but NUL can live with pluses instead of commans
1084 foreach (@$modules) {s/,/+/g;}
1085 generate_configs("", $generated, $filename);
1087 if (scalar @$modules) {
1088 my ($kbin, $kcmd) = split(' ', shift(@$modules), 2);
1089 $kcmd = '' if !defined $kcmd;
1091 @$modules = map { if (/\.dtb$/) { $dtb=$_; (); } else { $_ } } @$modules;
1092 my $initrd = join ",", @$modules;
1094 push(@qemu_flags, ('-kernel', $kbin, '-append', $kcmd));
1095 push(@qemu_flags, ('-initrd', $initrd)) if $initrd;
1096 push(@qemu_flags, ('-dtb', $dtb)) if $dtb;
1099 if (!grep /^-serial$/, @qemu_flags) {
1100 push(@qemu_flags, qw(-serial stdio)); # Redirect serial output (for collecting test restuls)
1102 unshift(@qemu_flags, ('-name', $config_name));
1103 print STDERR "novaboot: Running: ".shell_cmd_string($qemu, @qemu_flags)."\n";
1104 $exp = Expect->spawn(($qemu, @qemu_flags)) || die("exec() failed: $!");
1107 ### Local DHCPD and TFTPD
1109 my ($dhcpd_pid, $tftpd_pid);
1111 $tftp=1 if $tftp_port;
1113 if (defined $dhcp_tftp)
1115 generate_configs("(nd)", $generated, $filename);
1116 system_verbose('mkdir -p tftpboot');
1117 generate_grub_config("tftpboot/os-menu.lst", $config_name, "(nd)", \@$modules, "timeout 0");
1118 open(my $fh, '>', 'dhcpd.conf');
1119 my $mac = `cat /sys/class/net/$netif/address`;
1121 print $fh "subnet 10.23.23.0 netmask 255.255.255.0 {
1122 range 10.23.23.10 10.23.23.100;
1123 filename \"bin/boot/grub/pxegrub.pxe\";
1124 next-server 10.23.23.1;
1127 hardware ethernet $mac;
1128 fixed-address 10.23.23.1;
1131 system_verbose("sudo ip a add 10.23.23.1/24 dev $netif;
1132 sudo ip l set dev $netif up;
1133 sudo touch dhcpd.leases");
1135 # We run servers by forking ourselves, because the servers end up
1136 # in our process group and get killed by signals sent to the
1137 # process group (e.g. Ctrl-C on terminal).
1138 $dhcpd_pid = fork();
1139 exec_verbose("sudo dhcpd -d -cf dhcpd.conf -lf dhcpd.leases -pf dhcpd.pid") if ($dhcpd_pid == 0);
1142 if (defined $dhcp_tftp || defined $tftp) {
1144 # Unfortunately, tftpd requires root privileges even with
1145 # non-privileged (>1023) port due to initgroups().
1146 system_verbose("sudo in.tftpd --listen --secure -v -v -v --pidfile tftpd.pid --address :$tftp_port $builddir");
1148 # Kill server when we die
1149 $SIG{__DIE__} = sub { system_verbose('sudo pkill --pidfile=dhcpd.pid') if (defined $dhcp_tftp);
1150 system_verbose('sudo pkill --pidfile=tftpd.pid'); };
1152 # We have to kill tftpd explicitely, because it is not in our process group
1153 $SIG{INT} = sub { system_verbose('sudo pkill --pidfile=tftpd.pid'); exit(0); };
1157 if (defined $ider) {
1158 my $ider_cmd= "amtider -c $iso_image -u $amt_user -p $amt_password $amt_host $amt_port" ;
1159 print STDERR "novaboot: Running: $ider_cmd\n" =~ s/\Q$amt_password\E/???/r;
1160 my $ider_pid = fork();
1161 if ($ider_pid == 0) {
1163 die "IDE redirection failed";
1165 # FIXME: This collides with --tftp option. Hopefully, nobody needs
1166 # to use both simultaneously.
1167 $SIG{__DIE__} = sub { system_verbose('kill $ider_pid'); };
1170 ### Reset target (IP relay, AMT, ...)
1172 if (defined $target_reset && $reset) {
1173 print STDERR "novaboot: Reseting the test box... ";
1175 print STDERR "done\n";
1177 # We don't want to output anything printed by the target
1178 # before reset so we clear the buffers now. This is, however,
1179 # not ideal because we may loose some data that were sent
1180 # after the reset. If this is a problem, one should reset and
1181 # connect to serial line in atomic manner. For example, if
1182 # supported by hardware, use --remote-cmd 'sterm -d ...' and
1183 # do not use separate --reset-cmd.
1184 my $log = $exp->log_stdout;
1185 $exp->log_stdout(0);
1186 $exp->expect(0); # Read data from target
1187 $exp->clear_accum(); # Clear the read data
1188 $exp->log_stdout($log);
1192 ### U-boot conversation
1193 if (defined $uboot) {
1194 my $uboot_prompt = $uboot || '=> ';
1195 print STDERR "novaboot: Waiting for U-Boot prompt...\n";
1196 $exp || die("No serial line connection");
1197 $exp->log_stdout(1);
1198 #$exp->exp_internal(1);
1200 [qr/Hit any key to stop autoboot:/, sub { $exp->send("\n"); exp_continue; }],
1201 $uboot_prompt) || die "No U-Boot prompt deteceted";
1202 foreach my $cmdspec (@uboot_init) {
1203 my ($cmd, $timeout);
1204 die "Internal error - please report a bug" unless ref($cmdspec) eq "HASH";
1206 if ($cmdspec->{system}) {
1207 $cmd = `$cmdspec->{system}`;
1209 $cmd = $cmdspec->{command};
1211 $timeout = $cmdspec->{timeout} // 10;
1213 if ($cmd =~ /\$NB_MYIP/) {
1214 my $ip = (grep /inet /, `ip addr show $netif`)[0] || die "Problem determining IP address of $netif";
1215 $ip =~ s/\s*inet ([0-9.]*).*/$1/;
1216 $cmd =~ s/\$NB_MYIP/$ip/g;
1218 if ($cmd =~ /\$NB_PREFIX/) {
1221 $cmd =~ s/\$NB_PREFIX/$p/g;
1224 $exp->send("$cmd\n");
1226 my ($matched_pattern_position, $error,
1227 $successfully_matching_string,
1228 $before_match, $after_match) =
1229 $exp->expect($timeout, $uboot_prompt);
1230 die "No U-Boot prompt: $error" if $error;
1232 if ($cmdspec->{dest}) {
1233 open(my $fh, ">", $cmdspec->{dest}) or die "Cannot open '$cmdspec->{dest}': $!";
1234 print $fh $before_match;
1239 # Load files if there are some load lines in the script
1240 if (scalar(@$modules) > 0 && !$variables->{NO_BOOT}) {
1241 my ($kbin, $kcmd) = split(' ', shift(@$modules), 2);
1243 @$modules = map { if (/\.dtb$/) { $dtb=$_; (); } else { $_ } } @$modules;
1244 my $initrd = shift @$modules;
1246 if (defined $kbin) {
1247 die "No '--uboot-addr kernel' given" unless $uboot_addr{kernel};
1248 $exp->send("tftpboot $uboot_addr{kernel} $prefix$kbin\n");
1250 [qr/##/, sub { exp_continue; }],
1251 $uboot_prompt) || die "Kernel load: " . ($! || "timeout");
1254 die "No '--uboot-addr fdt' given" unless $uboot_addr{fdt};
1255 $exp->send("tftpboot $uboot_addr{fdt} $prefix$dtb\n");
1257 [qr/##/, sub { exp_continue; }],
1258 $uboot_prompt) || die "Device tree load: " . ($! || "timeout");
1260 $uboot_addr{fdt} = '';
1262 if (defined $initrd) {
1263 die "No '--uboot-addr ramdisk' given" unless $uboot_addr{ramdisk};
1264 $exp->send("tftpboot $uboot_addr{ramdisk} $prefix$initrd\n");
1266 [qr/##/, sub { exp_continue; }],
1267 $uboot_prompt) || die "Initrd load: " . ($! || "timeout");
1269 $uboot_addr{ramdisk} = '-';
1273 $exp->send("setenv bootargs $kcmd\n");
1274 $exp->expect(5, $uboot_prompt) || die "U-Boot prompt: " . ($! || "timeout");
1277 $uboot_cmd //= $variables->{UBOOT_CMD} // 'bootm $kernel_addr $ramdisk_addr $fdt_addr';
1278 if (!$variables->{NO_BOOT} && $uboot_cmd ne '') {
1279 $uboot_cmd =~ s/\$kernel_addr/$uboot_addr{kernel}/g;
1280 $uboot_cmd =~ s/\$ramdisk_addr/$uboot_addr{ramdisk}/g;
1281 $uboot_cmd =~ s/\$fdt_addr/$uboot_addr{fdt}/g;
1283 $exp->send($uboot_cmd . "\n");
1284 $exp->expect(5, "\n") || die "U-Boot command: " . ($! || "timeout");
1288 ### Serial line interaction
1289 if ($interaction && defined $exp) {
1290 # Serial line of the target is available
1291 my $interrupt = 'Ctrl-C';
1292 if ($interactive && !@exiton) {
1293 $interrupt = '"~~."';
1295 print STDERR "novaboot: Serial line interaction (press $interrupt to interrupt)...\n";
1296 $exp->log_stdout(1);
1298 $exp->expect($exiton_timeout, @expect_raw, @exiton) || die("exiton: " . ($! || "timeout"));
1300 my @inputs = ($exp);
1301 my $infile = new IO::File;
1302 $infile->IO::File::fdopen(*STDIN,'r');
1303 my $in_object = Expect->exp_init($infile);
1304 $in_object->set_group($exp);
1307 $in_object->set_seq('~~\.', sub { print STDERR "novaboot: Escape sequence detected\r\n"; undef; });
1308 $in_object->manual_stty(0); # Use raw terminal mode
1310 $in_object->manual_stty(1); # Do not modify terminal settings
1312 push(@inputs, $in_object);
1314 #print Dumper(\@expect_raw);
1315 $exp->expect(undef, @expect_raw) if @expect_raw;
1317 $^W = 0; # Suppress Expect warning: handle id(3) is not a tty. Not changing mode at /usr/share/perl5/Expect.pm line 393, <> line 8.
1318 Expect::interconnect(@inputs) unless defined($exp->exitstatus);
1323 # When exp-spawned command ignores SIGHUP, Expect waits 5 seconds
1324 # before killing it. We kill it by SIGTERM immediately.
1325 kill TERM => $exp->pid if defined $exp && $exp->pid;
1327 ## Kill dhcpc or tftpd
1328 if (defined $dhcp_tftp || defined $tftp) {
1329 die("novaboot: This should kill servers on background\n");
1332 # Always finish novaboot output with newline
1333 print "\n" if $final_eol;
1340 novaboot - Boots a locally compiled operating system on a remote
1347 B<novaboot> [option]... [--] script...
1349 B<./script> [option]...
1353 Novaboot makes booting of a locally compiled operating system (OS)
1354 (e.g. NOVA or Linux) on remote targets as simple as running a program
1355 locally. It automates things like copying OS images to a TFTP server,
1356 generation of bootloader configuration files, resetting of target
1357 hardware or redirection of target's serial line to stdin/out. Novaboot
1358 is highly configurable and makes it easy to boot a single image on
1359 different targets or different images on a single target.
1361 Novaboot operation is controlled by configuration files, command line
1362 options and by a so-called novaboot script, which can be thought as a
1363 generalization of bootloader configuration files (see L</"NOVABOOT
1364 SCRIPT SYNTAX">). The typical way of using novaboot is to make the
1365 novaboot script executable and set its first line to I<#!/usr/bin/env
1366 novaboot>. Then, booting a particular OS configuration becomes the
1367 same as executing a local program – the novaboot script.
1369 Novaboot uses configuration files to, among other things, define
1370 command line options needed for different targets. Users typically use
1371 only the B<-t>/B<--target> command line option to select the target.
1372 Internally, this option expands to the pre-configured options.
1373 Novaboot searches configuration files at multiple places, which allows
1374 having per-system, per-user or per-project configurations.
1375 Configuration file syntax is described in section L</"CONFIGURATION
1378 Simple examples of using C<novaboot>:
1384 Running an OS in Qemu can be accomplished by giving the B<--qemu> option.
1387 novaboot --qemu myos
1389 (or C<./myos --qemu> as described above) will run Qemu and make it
1390 boot the configuration specified in the F<myos> script.
1394 Create a bootloader configuration file (currently supported
1395 bootloaders are GRUB, GRUB2, ISOLINUX, Pulsar, and U-Boot) and copy it
1396 with all other files needed for booting to a remote boot server. Then
1397 use a TCP/IP-controlled relay/serial-to-TCP converter to reset the
1398 target and receive its serial output.
1400 ./myos --grub2 --server=192.168.1.1:/tftp --iprelay=192.168.1.2
1402 Alternatively, you can put these switches to the configuration file
1405 ./myos --target mytarget
1409 Run DHCP and TFTP server on developer's machine to boot the target
1414 This usage is useful when no network infrastructure is in place, and
1415 the target is connected directly to developer's box.
1419 Create bootable ISO image.
1421 novaboot --iso -- script1 script2
1423 The created ISO image will have ISOLINUX bootloader installed on it,
1424 and the boot menu will allow selecting between I<script1> and
1425 I<script2> configurations.
1429 =head1 PHASES AND OPTIONS
1431 Novaboot performs its work in several phases. Command like options
1432 described bellow influence the execution of each phase or allow their
1433 skipping. The list of phases (in the execution order) is as follows.
1437 =item 1. L<Configuration reading|/Configuration reading phase>
1439 =item 2. L<Command line processing|/Command line processing phase>
1441 =item 3. L<Script preprocessing|/Script preprocessing phase>
1443 =item 4. L<File generation|/File generation phase>
1445 =item 5. L<Target connection|/Target connection check>
1447 =item 6. L<File deployment|/File deployment phase>
1449 =item 7. L<Target power-on and reset|/Target power-on and reset phase>
1451 =item 8. L<Interaction with the bootloader|/Interaction with the bootloader on the target>
1453 =item 9. L<Target interaction|/Target interaction phase>
1457 Each phase is described in the following sections together with the
1458 command line options that control it.
1460 =head2 Configuration reading phase
1462 After starting, novaboot reads zero or more configuration files. We
1463 describe their content in section L</"CONFIGURATION FILES">. By default, the
1464 configuration is read from multiple locations. First from the system
1465 configuration directory (F</etc/novaboot.d/>), second from the user
1466 configuration file (F<~/.config/novaboot>) and third from F<.novaboot>
1467 files along the path to the current directory. Alternatively, a single
1468 configuration file specified with the B<-c> switch or with the
1469 C<NOVABOOT_CONFIG> environment variable is read. The latter read files
1470 override settings from the former ones.
1472 The system configuration directory is determined by the content of
1473 NOVABOOT_CONFIG_DIR environment variable and defaults to
1474 F</etc/novaboot.d>. Files in this directory with names consisting
1475 solely of English letters, numbers, dashes '-' and underscores '_'
1476 (note that dot '.' is not included) are read in alphabetical order.
1478 Then, the user configuration file is read from
1479 F<$XDG_CONFIG_HOME/novaboot>. If C<$XDG_CONFIG_HOME> environment
1480 variable is not set F<~/.config/novaboot> is read instead.
1482 Finally, novaboot searches for files named F<.novaboot> starting from the
1483 directory of the novaboot script (or working directory, see bellow)
1484 and continuing upwards up to the root directory. The found
1485 configuration files are then read in the opposite order (i.e. from the
1486 root directory downwards). This ordering allows having, for example, a project
1487 specific configuration in F<~/project/.novaboot>.
1489 Note the difference between F<~/.config/novaboot> and F<~/.novaboot>.
1490 The former one is always read, whereas the latter only when novaboot
1491 script or working directory is under the C<$HOME> directory.
1493 In certain cases, the location of the novaboot script cannot be
1494 determined in this early phase. This situation happens either when the script is
1495 read from the standard input or when novaboot is invoked explicitly as
1496 in the example L</"4."> above. In this case, the current working
1497 directory is used as a starting point for configuration file search
1498 instead of the novaboot script directory.
1502 =item -c, --config=I<filename>
1504 Use the specified configuration file instead of the default one(s).
1508 =head2 Command line processing phase
1514 Dump the current configuration to stdout end exit. Useful as an
1515 initial template for a configuration file.
1519 Print short (B<-h>) or long (B<--help>) help.
1521 =item -t, --target=I<target>
1523 This option serves as a user configurable shortcut for other novaboot
1524 options. The effect of this option is the same as specifying the
1525 options stored in the C<%targets> configuration variable under key
1526 I<target>. See also L</"CONFIGURATION FILES">.
1528 When this option is not given, novaboot tries to determine the target
1529 to use from either B<NOVABOOT_TARGET> environment variable or
1530 B<$default_target> configuration file variable.
1532 =item --ssh=I<user@hostname>
1534 Configures novaboot to control the target via C<novaboot-shell>
1535 running remotely via SSH.
1537 Using this option is the same as specifying B<--remote-cmd>,
1538 B<--remote-expect>, B<--server> B<--rsync-flags>, B<--prefix> and
1539 B<--reset-cmd> manually in a way compatible with C<novaboot-shell>.
1540 The server can be configured to provide other, safe bootloader-related
1541 options, to the client. When this happens, novaboot prints them to
1544 Currently, this in an initial experimental implementation. We plan to
1545 change/extend this feature soon!
1549 =head2 Script preprocessing phase
1551 This phase allows modifying the parsed novaboot script before it is
1552 used in the later phases.
1556 =item -a, --append=I<parameters>
1558 Append a string to the first C<load> line in the novaboot script. This option
1559 can be used to append parameters to the kernel's or root task's
1560 command line. This option can appear multiple times.
1564 Use L<Bender|https://github.com/TUD-OS/morbo/blob/master/standalone/bender.c>
1565 chainloader. Bender scans the PCI bus for PCI serial ports and stores
1566 the information about them in the BIOS data area for use by the
1569 =item --chainloader=I<chainloader>
1571 Specifies a chainloader that is loaded before the kernel and other
1572 files specified in the novaboot script. E.g. 'bin/boot/bender
1577 Print the modules to boot and their parameters, after this phase
1578 finishes. Then exit. This is useful for seeing the effect of other
1579 options in this section.
1581 =item -k, --kernel=F<file>
1583 Replace the first word on the first C<load> line in the novaboot
1584 script with F<file>.
1586 =item --scriptmod=I<Perl expression>
1588 When novaboot reads the script, I<Perl expression> is executed for every
1589 line (in $_ variable). For example, C<novaboot
1590 --scriptmod=s/sigma0/omega6/g> replaces every occurrence of I<sigma0>
1591 in the script with I<omega6>.
1593 When this option is present, it overrides I<$script_modifier> variable
1594 from the configuration file, which has the same effect. If this option
1595 is given multiple times all expressions are evaluated in the command
1600 =head2 File generation phase
1602 In this phase, files needed for booting are generated in a so-called
1603 I<build directory> (see L</--build-dir>). In most cases configuration
1604 for a bootloader is generated automatically by novaboot. It is also
1605 possible to generate other files using I<heredoc> or I<"<"> syntax in
1606 novaboot scripts. Finally, novaboot can generate binaries in this phases by
1607 running C<scons> or C<make>.
1611 =item --build-dir=I<directory>
1613 Overrides the default build directory location.
1615 The default build directory location is determined as follows: If the
1616 configuration file defines the C<$builddir> variable, its value is
1617 used. Otherwise, it is the directory that contains the first processed
1620 See also L</BUILDDIR> variable.
1622 =item -g, --grub[=I<filename>]
1624 Generates grub bootloader menu file. If the I<filename> is not
1625 specified, F<menu.lst> is used. The I<filename> is relative to the
1626 build directory (see B<--build-dir>).
1628 =item --grub-preamble=I<prefix>
1630 Specifies the I<preamble> that is at the beginning of the generated
1631 GRUB or GRUB2 config files. This is useful for specifying GRUB's
1634 =item --prefix=I<prefix>
1636 Specifies I<prefix> (e.g. F</srv/tftp>) that is put in front of every
1637 filename in generated bootloader configuration files (or in U-Boot
1640 If the I<prefix> contains string $NAME, it will be replaced with the
1641 name of the novaboot script (see also B<--name>).
1643 If the I<prefix> contains string $BUILDDIR, it will be replaced with
1644 the build directory (see also B<--build-dir>).
1648 Alias for B<--prefix>.
1650 =item --grub2[=I<filename>]
1652 Generate GRUB2 menu entry in I<filename>. If I<filename> is not
1653 specified F<grub.cfg> is used. The content of the menu entry can be
1654 customized with B<--grub-preamble>, B<--grub2-prolog> or
1655 B<--grub_prefix> options.
1657 To use the generated menu entry on your development
1658 machine that uses GRUB2, append the following snippet to
1659 F</etc/grub.d/40_custom> file and regenerate your grub configuration,
1660 i.e. run update-grub on Debian/Ubuntu.
1662 if [ -f /path/to/nul/build/grub.cfg ]; then
1663 source /path/to/nul/build/grub.cfg
1666 =item --grub2-prolog=I<prolog>
1668 Specifies the text that novaboot puts at the beginning of the GRUB2 menu entry.
1670 =item -m, --make[=make command]
1672 Runs C<make> to build files that are not generated by novaboot itself.
1674 =item --name=I<string>
1676 Use the name I<string> instead of the name of the novaboot script.
1677 This name is used for things like a title of grub menu or for the
1678 server directory where the boot files are copied to.
1682 Do not run external commands to generate files (i.e. "<" syntax and
1683 C<run> keyword). This switch does not influence the generation of files
1684 specified with "<<WORD" syntax.
1686 =item -p, --pulsar[=mac]
1688 Generates pulsar bootloader configuration file named F<config-I<mac>>
1689 The I<mac> string is typically a MAC address and defaults to
1692 =item --scons[=scons command]
1694 Runs C<scons> to build files that are not generated by novaboot
1699 Strip I<rom://> prefix from command lines and generated config files.
1700 The I<rom://> prefix is used by NUL. For NRE, it has to be stripped.
1704 Exit novaboot after file generation phase.
1708 =head2 Target connection check
1710 In this phase novaboot connects to target's serial port (if it has
1711 one). If another novaboot user/instance occupies the target, novaboot
1712 exits here with an error message.
1716 =item --amt=I<"[user[:password]@]host[:port]>
1718 Use Intel AMT technology to control the target machine. WS management
1719 is used to powercycle it and Serial-Over-Lan (SOL) for input/output.
1720 The hostname or (IP address) is given by the I<host> parameter. If the
1721 I<password> is not specified, environment variable AMT_PASSWORD is
1722 used. The I<port> specifies a TCP port for SOL. If not specified, the
1723 default is 16992. The default I<user> is admin.
1725 =item --iprelay=I<addr[:port]>
1727 Use TCP/IP relay and serial port to access the target's serial port
1728 and powercycle it. The I<addr> parameter specifies the IP address of
1729 the relay. If I<port> is not specified, it defaults to 23.
1731 Note: This option is supposed to work with HWG-ER02a IP relays.
1733 =item --iprelay-cmd=I<command>
1735 Similar to B<--iprelay> but uses I<command> to talk to the iprelay
1736 rather than direct network connection.
1738 =item -s, --serial[=device]
1740 Target's serial line is connected to host's serial line (device). The
1741 default value for device is F</dev/ttyUSB0>.
1743 The value of this option is exported in NB_NOVABOOT environment
1744 variable to all subprocesses run by C<novaboot>.
1746 =item --stty=I<settings>
1748 Specifies settings passed to C<stty> invoked on the serial line
1749 specified with B<--serial> option. If this option is not given,
1750 C<stty> is called with C<raw -crtscts -onlcr 115200> settings.
1752 =item --remote-cmd=I<cmd>
1754 Command that mediates connection to the target's serial line. For
1755 example C<ssh server 'cu -l /dev/ttyS0'>.
1757 =item --remote-expect=I<string>
1759 Wait for reception of I<string> after establishing the remote
1760 connection. This option is needed when novaboot should wait for
1761 confirmation before deploying files to the target, e.g. to not
1762 overwrite other user's files when they are using the target.
1764 =item --remote-expect-silent=I<string>
1766 The same as B<--remote-expect> except that the remote output is not
1767 echoed to stdout while waiting for the I<string>. Everything after the
1768 matched string is printed to stdout, so you may want to include line
1769 end characters in the I<string> as well.
1771 =item --remote-expect-timeout=I<seconds>
1773 Timeout in seconds for B<--remote-expect> or
1774 B<--remote-expect-seconds>. When negative, waits forever. The default
1779 =head2 File deployment phase
1781 In some setups, it is necessary to copy the files needed for booting
1782 to a particular location, e.g. to a TFTP boot server or to the
1787 =item -d, --dhcp-tftp
1789 Turns your workstation into a DHCP and TFTP server so that the OS can
1790 be booted via PXE BIOS (or similar mechanism) on the test machine
1791 directly connected by a plain Ethernet cable to your workstation.
1793 The DHCP and TFTP servers require root privileges and C<novaboot>
1794 uses C<sudo> command to obtain those. You can put the following to
1795 I</etc/sudoers> to allow running the necessary commands without asking
1798 Cmnd_Alias NOVABOOT = /bin/ip a add 10.23.23.1/24 dev eth0, /bin/ip l set dev eth0 up, /usr/sbin/dhcpd -d -cf dhcpd.conf -lf dhcpd.leases -pf dhcpd.pid, /usr/sbin/in.tftpd --listen --secure -v -v -v --pidfile tftpd.pid *, /usr/bin/touch dhcpd.leases, /usr/bin/pkill --pidfile=dhcpd.pid, /usr/bin/pkill --pidfile=tftpd.pid
1799 your_login ALL=NOPASSWD: NOVABOOT
1803 Starts a TFTP server on your workstation. This is similar to
1804 B<--dhcp-tftp> except that DHCP server is not started.
1806 The TFTP server requires root privileges and C<novaboot> uses C<sudo>
1807 command to obtain those. You can put the following to I</etc/sudoers>
1808 to allow running the necessary commands without asking for a password.
1810 Cmnd_Alias NOVABOOT = /usr/sbin/in.tftpd --listen --secure -v -v -v --pidfile tftpd.pid *, /usr/bin/pkill --pidfile=tftpd.pid
1811 your_login ALL=NOPASSWD: NOVABOOT
1813 =item --tftp-port=I<port>
1815 Port to run the TFTP server on. Implies B<--tftp>.
1817 =item --netif=I<network interface>
1819 Network interface used to deploy files to the target. The default value is
1820 I<eth0>. This option influences the configuration of the DHCP server started
1821 by B<--dhcp-tftp> and the value that B<$NB_MYIP> get replaced with during
1822 U-Boot conversation.
1824 =item --iso[=filename]
1826 Generates the ISO image that boots NOVA system via GRUB. If no filename
1827 is given, the image is stored under I<NAME>.iso, where I<NAME> is the name
1828 of the novaboot script (see also B<--name>).
1830 =item --server[=[[user@]server:]path]
1832 Copy all files needed for booting to another location. The files will
1833 be copied (by B<rsync> tool) to the directory I<path>. If the I<path>
1834 contains string $NAME, it will be replaced with the name of the
1835 novaboot script (see also B<--name>).
1837 =item --rsync-flags=I<flags>
1839 Specifies I<flags> to append to F<rsync> command line when
1840 copying files as a result of I<--server> option.
1844 If B<--server> is used and its value ends with $NAME, then after
1845 copying the files, a new bootloader configuration file (e.g. menu.lst)
1846 is created at I<path-wo-name>, i.e. the path specified by B<--server>
1847 with $NAME part removed. The content of the file is created by
1848 concatenating all files of the same name from all subdirectories of
1849 I<path-wo-name> found on the "server".
1853 Use Intel AMT technology for IDE redirection. This allows the target
1854 machine to boot from novaboot created ISO image. Implies B<--iso>.
1856 The experimental C<amtider> utility needed by this option can be
1857 obtained from https://github.com/wentasah/amtterm.
1861 =head2 Target power-on and reset phase
1863 At this point, the target is reset (or switched on/off). There are
1864 several ways how this can be accomplished. Resetting a physical target
1865 can currently be accomplished by the following options: B<--amt>,
1866 B<--iprelay>, B<--reset-cmd> and B<--reset-send>.
1872 Switch on/off the target machine and exit. The script (if any) is
1873 completely ignored. Currently, it works only with the following
1874 options: B<--iprelay>, B<--amt>, B<--ssh>.
1876 =item -Q, --qemu[=I<qemu-binary>]
1878 Boot the configuration in qemu. Optionally, the name of qemu binary
1879 can be specified as a parameter.
1881 =item --qemu-append=I<flags>
1883 Append I<flags> to the default qemu flags (QEMU_FLAGS variable or
1884 C<-cpu coreduo -smp 2>).
1886 =item -q, --qemu-flags=I<flags>
1888 Replace the default qemu flags (QEMU_FLAGS variable or C<-cpu coreduo
1889 -smp 2>) with I<flags> specified here.
1891 =item --reset-cmd=I<cmd>
1893 Runs command I<cmd> to reset the target.
1895 =item --reset-send=I<string>
1897 Reset the target by sending the given I<string> to the remote serial
1898 line. "\n" sequences are replaced with the newline character.
1900 =item --no-reset, --reset
1902 Disable/enable resetting of the target.
1906 =head2 Interaction with the bootloader on the target
1910 =item --uboot[=I<prompt>]
1912 Interact with U-Boot bootloader to boot the thing described in the
1913 novaboot script. I<prompt> specifies the U-Boot's prompt (default is
1914 "=> ", other common prompts are "U-Boot> " or "U-Boot# ").
1918 Disable U-Boot interaction previously enabled with B<--uboot>.
1922 Command(s) to send the U-Boot bootloader before loading the images and
1923 booting them. This option can be given multiple times. After sending
1924 commands from each option novaboot waits for U-Boot I<prompt>.
1926 If the command contains string I<$NB_MYIP> then this string is
1927 replaced by IPv4 address of eth0 interface (see also B<--netif>).
1928 Similarly, I<$NB_PREFIX> is replaced with prefix given by B<--prefix>.
1930 See also C<uboot> keyword in L</"NOVABOOT SCRIPT SYNTAX">).
1932 =item --uboot-addr I<name>=I<address>
1934 Load address of U-Boot's C<tftpboot> command for loading I<name>,
1935 where name is one of I<kernel>, I<ramdisk> or I<fdt> (flattened device
1938 The default addresses are ${I<name>_addr_r}, i.e. U-Boot environment
1939 variables used by convention for this purpose.
1941 =item --uboot-cmd=I<command>
1943 Specifies U-Boot command used to execute the OS. If the command
1944 contains strings C<$kernel_addr>, C<$ramdisk_addr>, C<$fdt_addr>,
1945 these are replaced with the addresses configured with B<--uboot-addr>.
1947 The default value is
1949 bootm $kernel_addr $ramdisk_addr $fdt_addr
1951 or the C<UBOOT_CMD> variable if defined in the novaboot script.
1955 =head2 Target interaction phase
1957 In this phase, target's serial output is redirected to stdout and if
1958 stdin is a TTY, it is redirected to the target's serial input allowing
1959 interactive work with the target.
1963 =item --exiton=I<string>
1965 When the I<string> is sent by the target, novaboot exits. This option can
1966 be specified multiple times, in which case novaboot exits whenever
1967 either of the specified strings is sent.
1969 If the I<string> is C<-re>, then the next B<--exiton>'s I<string> is
1970 treated as a regular expression. For example:
1972 --exiton -re --exiton 'error:.*failed'
1974 =item --exiton-re=I<regex>
1976 The same as --exiton -re --exiton I<regex>.
1978 =item --exiton-timeout=I<seconds>
1980 By default B<--exiton> waits for the string match forever. When this
1981 option is specified, "exiton" timeouts after the specifies the number of
1982 seconds and novaboot returns non-zero exit code.
1984 =item -i, --interactive
1986 Setup things for the interactive use of the target. Your terminal will
1987 be switched to raw mode. In raw mode, your local terminal does not
1988 process input in any way (no echoing of entered characters, no
1989 interpretation of special characters). This, among others, means that
1990 Ctrl-C is passed to the target and does not interrupt novaboot. To
1991 exit from novaboot interactive mode type "~~.".
1993 =item --no-interaction, --interaction
1995 Skip resp. force target interaction phase. When skipped, novaboot exits
1996 immediately after the boot is initiated.
1998 =item --expect=I<string>
2000 When the I<string> is received from the target, send the string specified
2001 with the subsequent B<--send*> option to the target.
2003 =item --expect-re=I<regex>
2005 When target's output matches regular expression I<regex>, send the
2006 string specified with the subsequent B<--send*> option to the target.
2008 =item --expect-raw=I<perl-code>
2010 Provides direct control over Perl's Expect module.
2012 =item --send=I<string>
2014 Send I<string> to the target after the previously specified
2015 B<--expect*> was matched in the target's output. The I<string> may
2016 contain escape sequences such as "\n".
2018 Note that I<string> is actually interpreted by Perl, so it can contain
2019 much more that escape sequences. This behavior may change in the
2022 Example: C<--expect='login: ' --send='root\n'>
2024 =item --sendcont=I<string>
2026 Similar to B<--send> but continue expecting more input.
2028 Example: C<--expect='Continue?' --sendcont='yes\n'>
2030 =item --final-eol, --no-final-eol
2032 By default, B<novaboot> always prints an end-of-line character at the
2033 end of its execution in order to ensure that the output of programs
2034 started after novaboot appears at the beginning of the line. When this
2035 is not desired B<--no-final-eol> option can be used to override this
2040 =head1 NOVABOOT SCRIPT SYNTAX
2042 The syntax tries to mimic POSIX shell syntax. The syntax is defined
2043 by the following rules.
2045 Lines starting with "#" and empty lines are ignored.
2047 Lines that end with "\" are concatenated with the following line after
2048 removal of the final "\" and leading whitespace of the following line.
2050 Lines of the form I<VARIABLE=...> (i.e. matching '^[A-Z_]+=' regular
2051 expression) assign values to internal variables. See L</VARIABLES>
2054 Otherwise, the first word on the line defines the meaning of the line.
2055 The following keywords are supported:
2061 These lines represent modules to boot. The
2062 word after C<load> is a file name (relative to the build directory
2063 (see B<--build-dir>) of the module to load and the remaining words are
2064 passed to it as the command line parameters.
2066 When the C<load> line ends with "<<WORD" then the subsequent lines
2067 until the line containing solely WORD are copied literally to the file
2068 named on that line. This is similar to shell's heredoc feature.
2070 When the C<load> line ends with "< CMD" then command CMD is executed
2071 with F</bin/sh> and its standard output is stored in the file named on
2072 that line. The SRCDIR variable in CMD's environment is set to the
2073 absolute path of the directory containing the interpreted novaboot
2078 These lines are similar to C<load> lines. The
2079 file mentioned there is copied to the same place as in the case of C<load>
2080 (e.g. tftp server), but the file is not used in the bootloader
2081 configuration. Such a file can be used by the target for other
2082 purposes than booting, e.g. at OS runtime or for firmware update.
2086 Chainload another bootloader. Instead of loading multiboot modules
2087 identified with C<load> keyword, run another bootloader. This is
2088 currently supported only by pulsar and can be used to load e.g. Grub
2089 as in the example below:
2091 chld boot/grub/i386-pc/core.0
2096 Lines starting with C<run> keyword contain shell commands that are run
2097 during file generation phase. This is the same as the "< CMD" syntax
2098 for C<load> keyboard except that the command's output is not
2099 redirected to a file. The ordering of commands is the same as they
2100 appear in the novaboot script.
2104 These lines represent U-Boot commands that are sent to the target if
2105 B<--uboot> option is given. Having a U-Boot line in the novaboot
2106 script is the same as giving B<--uboot-init> option to novaboot. The
2107 following syntax variants are supported:
2110 uboot[:<timeout>] <string> [> <file>]
2111 uboot[:<timeout>] < <shell> [> <file>]
2113 C<string> is the literal U-Boot command.
2115 The C<uboot> keyword can be suffixed with timeout specification. The
2116 syntax is C<uboot:Ns>, where C<N> is the whole number of seconds. If
2117 the U-Boot command prompt does not appear before the timeout, novaboot
2118 fails. The default timeout is 10 seconds.
2120 In the second variant with the C<<> character the shell code is
2121 executed and its standard output is sent to U-Boot. Example:
2123 uboot < printf "mmc write \$loadaddr 1 %x" $(($(/usr/bin/stat -c%s rootfs.ext4) / 512))
2125 When C<E<gt> file> part is present, the output of the U-Boot command
2126 is written into the given file.
2132 #!/usr/bin/env novaboot
2133 load bzImage console=ttyS0,115200
2134 run make -C buildroot
2135 load rootfs.cpio < gen_cpio buildroot/images/rootfs.cpio "myapp->/etc/init.d/S99myapp"
2137 Example (NOVA User Land - NUL):
2139 #!/usr/bin/env novaboot
2140 WVDESC=Example program
2141 load bin/apps/sigma0.nul S0_DEFAULT script_start:1,1 \
2142 verbose hostkeyb:0,0x60,1,12,2
2143 load bin/apps/hello.nul
2144 load hello.nulconfig <<EOF
2145 sigma0::mem:16 name::/s0/log name::/s0/timer name::/s0/fs/rom ||
2146 rom://bin/apps/hello.nul
2149 This example will load three modules: F<sigma0.nul>, F<hello.nul> and
2150 F<hello.nulconfig>. sigma0 receives some command line parameters and
2151 F<hello.nulconfig> file is generated on the fly from the lines between
2152 C<<<EOF> and C<EOF>.
2154 Example (Zynq system update via U-Boot):
2156 #!/usr/bin/env novaboot
2160 # Write kernel to FAT filesystem on the 1st SD card partition
2161 run mkimage -f uboot-image.its image.ub
2163 uboot:60s tftpboot ${loadaddr} $NB_PREFIX/image.ub
2164 uboot fatwrite mmc 0:1 ${loadaddr} image.ub $filesize
2165 uboot set bootargs console=ttyPS0,115200 root=/dev/mmcblk0p2
2167 # Write root FS image to the 2nd SD card partition
2168 copy rootfs/images/rootfs.ext4
2169 uboot:60s tftpboot ${loadaddr} $NB_PREFIX/rootfs/images/rootfs.ext4
2170 uboot mmc part > mmc-part.txt
2171 uboot < printf "mmc write \$loadaddr %x %x" $(awk '{ if ($1 == "2") { print $2 }}' mmc-part.txt) $(($(/usr/bin/stat -L --printf=%s rootfs/images/rootfs.ext4) / 512))
2178 The following variables are interpreted in the novaboot script:
2184 Novaboot chdir()s to this directory before file generation phase. The
2185 directory name specified here is relative to the build directory
2186 specified by other means (see L</--build-dir>).
2190 Assigning this variable has the same effect as specifying L</--exiton>
2195 Setting this variable to zero is the same as giving
2196 L</--no-interaction>, specifying to one corresponds to
2199 =item HYPERVISOR_PARAMS
2201 Parameters passed to the hypervisor. The default value is "serial", unless
2202 overridden in the configuration file.
2206 The kernel to use instead of the hypervisor specified in the
2207 configuration file with the C<$hypervisor> variable. The value should
2208 contain the name of the kernel image as well as its command line
2209 parameters. If this variable is defined and non-empty, the variable
2210 HYPERVISOR_PARAMS is not used.
2214 If this variable is 1, the system is not booted. This is currently
2215 only implemented for U-Boot bootloader where it is useful for
2216 interacting with the bootloader without booting the system - e.g. for
2221 Use a specific qemu binary (can be overridden with B<-Q>) and flags
2222 when booting this script under qemu. If QEMU_FLAGS variable is also
2223 specified flags specified in QEMU variable are replaced by those in
2228 Use specific qemu flags (can be overridden with B<-q>).
2232 See L</--uboot-cmd>.
2236 Description of the WvTest-compliant program.
2238 =item WVTEST_TIMEOUT
2240 The timeout in seconds for WvTest harness. If no complete line appears
2241 in the test output within the time specified here, the test fails. It
2242 is necessary to specify this for long running tests that produce no
2243 intermediate output.
2247 =head1 CONFIGURATION FILES
2249 Novaboot can read its configuration from one or more files. By
2250 default, novaboot looks for files in F</etc/novaboot.d>, file
2251 F<~/.config/novaboot> and files named F<.novaboot> as described in
2252 L</Configuration reading phase>. Alternatively, configuration file
2253 location can be specified with the B<-c> switch or with the
2254 NOVABOOT_CONFIG environment variable. The configuration file has Perl
2255 syntax (i.e. it is better to put C<1;> as the last line) and should set
2256 values of certain Perl variables. The current configuration can be
2257 dumped with the B<--dump-config> switch. Some configuration variables
2258 can be overridden by environment variables (see below) or by command
2261 Supported configuration variables include:
2267 Build directory location relative to the location of the configuration
2270 =item $default_target
2272 Default target (see below) to use when no target is explicitly
2273 specified with the B<--target> command line option or
2274 B<NOVABOOT_TARGET> environment variable.
2278 Hash of target definitions to be used with the B<--target> option. The
2279 key is the identifier of the target, the value is the string with
2280 command line options. For instance, if the configuration file contains:
2282 $targets{'mybox'} = '--server=boot:/tftproot --serial=/dev/ttyUSB0 --grub',
2284 then the following two commands are equivalent:
2286 ./myos --server=boot:/tftproot --serial=/dev/ttyUSB0 --grub
2291 =head1 ENVIRONMENT VARIABLES
2293 Some options can be specified not only via config file or command line
2294 but also through environment variables. Environment variables override
2295 the values from the configuration file and command line parameters
2296 override the environment variables.
2300 =item NOVABOOT_CONFIG
2302 Name of the novaboot configuration file to use instead of the default
2305 =item NOVABOOT_CONFIG_DIR
2307 Name of the novaboot configuration directory. When not specified
2308 F</etc/novaboot.d> is used.
2310 =item NOVABOOT_TARGET
2312 Name of the novaboot target to use. This overrides the value of
2313 B<$default_target> from the configuration file and can be overridden
2314 with the B<--target> command line option.
2316 =item NOVABOOT_BENDER
2318 Defining this variable has the same effect as using B<--bender>
2325 Michal Sojka <sojka@os.inf.tu-dresden.de>
2327 Latest novaboot version can be found at
2328 L<https://github.com/wentasah/novaboot>.
2332 # LocalWords: novaboot Novaboot NOVABOOT TFTP PXE DHCP filename stty
2333 # LocalWords: chainloader stdout Qemu qemu preprocessing ISOLINUX bootable
2334 # LocalWords: config subprocesses sudo sudoers tftp dhcp IDE stdin
2335 # LocalWords: subdirectories TTY whitespace heredoc POSIX WvTest