drivers/net/tokenring/tms380tr.c

   1 /*
   2  *  tms380tr.c: A network driver library for Texas Instruments TMS380-based
   3  *              Token Ring Adapters.
   4  *
   5  *  Originally sktr.c: Written 1997 by Christoph Goos
   6  *
   7  *  A fine result of the Linux Systems Network Architecture Project.
   8  *  http://www.vanheusden.com/sna/
   9  *
  10  *  This software may be used and distributed according to the terms
  11  *  of the GNU General Public License, incorporated herein by reference.
  12  *
  13  *  The following modules are currently available for card support:
  14  *      - tmspci (Generic PCI card support)
  15  *      - abyss (Madge PCI support)
  16  *      - tmsisa (SysKonnect TR4/16 ISA)
  17  *
  18  *  Sources:
  19  *      - The hardware related parts of this driver are take from
  20  *        the SysKonnect Token Ring driver for Windows NT.
  21  *      - I used the IBM Token Ring driver 'ibmtr.c' as a base for this
  22  *        driver, as well as the 'skeleton.c' driver by Donald Becker.
  23  *      - Also various other drivers in the linux source tree were taken
  24  *        as samples for some tasks.
  25  *      - TI TMS380 Second-Generation Token Ring User's Guide
  26  *      - TI datasheets for respective chips
  27  *      - David Hein at Texas Instruments
  28  *      - Various Madge employees
  29  *
  30  *  Maintainer(s):
  31  *    JS        Jay Schulist            jschlst@samba.org
  32  *    CG        Christoph Goos          cgoos@syskonnect.de
  33  *    AF        Adam Fritzler
  34  *    MLP       Mike Phillips           phillim@amtrak.com
  35  *    JF        Jochen Friedrich        jochen@scram.de
  36  *
  37  *  Modification History:
  38  *      29-Aug-97       CG      Created
  39  *      04-Apr-98       CG      Fixed problems caused by tok_timer_check
  40  *      10-Apr-98       CG      Fixed lockups at cable disconnection
  41  *      27-May-98       JS      Formated to Linux Kernel Format
  42  *      31-May-98       JS      Hacked in PCI support
  43  *      16-Jun-98       JS      Modulized for multiple cards with one driver
  44  *         Sep-99       AF      Renamed to tms380tr (supports more than SK's)
  45  *      23-Sep-99       AF      Added Compaq and Thomas-Conrad PCI support
  46  *                              Fixed a bug causing double copies on PCI
  47  *                              Fixed for new multicast stuff (2.2/2.3)
  48  *      25-Sep-99       AF      Uped TPL_NUM from 3 to 9
  49  *                              Removed extraneous 'No free TPL'
  50  *      22-Dec-99       AF      Added Madge PCI Mk2 support and generalized
  51  *                              parts of the initilization procedure.
  52  *      30-Dec-99       AF      Turned tms380tr into a library ala 8390.
  53  *                              Madge support is provided in the abyss module
  54  *                              Generic PCI support is in the tmspci module.
  55  *      30-Nov-00       JF      Updated PCI code to support IO MMU via
  56  *                              pci_map_static(). Alpha uses this MMU for ISA
  57  *                              as well.
  58  *      14-Jan-01       JF      Fix DMA on ifdown/ifup sequences. Some
  59  *                              cleanup.
  60  *      13-Jan-02       JF      Add spinlock to fix race condition.
  61  *      09-Nov-02       JF      Fixed printks to not SPAM the console during
  62  *                              normal operation.
  63  *      30-Dec-02       JF      Removed incorrect __init from
  64  *                              tms380tr_init_card.
  65  *      22-Jul-05       JF      Converted to dma-mapping.
  66  *
  67  *  To do:
  68  *    1. Multi/Broadcast packet handling (this may have fixed itself)
  69  *    2. Write a sktrisa module that includes the old ISA support (done)
  70  *    3. Allow modules to load their own microcode
  71  *    4. Speed up the BUD process -- freezing the kernel for 3+sec is
  72  *         quite unacceptable.
  73  *    5. Still a few remaining stalls when the cable is unplugged.
  74  */
  75
  76 #ifdef MODULE
  77 static const char version[] = "tms380tr.c: v1.10 30/12/2002 by Christoph Goos, Adam Fritzler\n";
  78 #endif
  79
  80 #include <linux/module.h>
  81 #include <linux/kernel.h>
  82 #include <linux/types.h>
  83 #include <linux/fcntl.h>
  84 #include <linux/interrupt.h>
  85 #include <linux/ptrace.h>
  86 #include <linux/ioport.h>
  87 #include <linux/in.h>
  88 #include <linux/string.h>
  89 #include <linux/time.h>
  90 #include <linux/errno.h>
  91 #include <linux/init.h>
  92 #include <linux/dma-mapping.h>
  93 #include <linux/delay.h>
  94 #include <linux/netdevice.h>
  95 #include <linux/etherdevice.h>
  96 #include <linux/skbuff.h>
  97 #include <linux/trdevice.h>
  98 #include <linux/firmware.h>
  99 #include <linux/bitops.h>
 100
 101 #include <asm/system.h>
 102 #include <asm/io.h>
 103 #include <asm/dma.h>
 104 #include <asm/irq.h>
 105 #include <asm/uaccess.h>
 106
 107 #include "tms380tr.h"           /* Our Stuff */
 108
 109 /* Use 0 for production, 1 for verification, 2 for debug, and
 110  * 3 for very verbose debug.
 111  */
 112 #ifndef TMS380TR_DEBUG
 113 #define TMS380TR_DEBUG 0
 114 #endif
 115 static unsigned int tms380tr_debug = TMS380TR_DEBUG;
 116
 117 /* Index to functions, as function prototypes.
 118  * Alphabetical by function name.
 119  */
 120
 121 /* "A" */
 122 /* "B" */
 123 static int      tms380tr_bringup_diags(struct net_device *dev);
 124 /* "C" */
 125 static void     tms380tr_cancel_tx_queue(struct net_local* tp);
 126 static int      tms380tr_chipset_init(struct net_device *dev);
 127 static void     tms380tr_chk_irq(struct net_device *dev);
 128 static void     tms380tr_chk_outstanding_cmds(struct net_device *dev);
 129 static void     tms380tr_chk_src_addr(unsigned char *frame, unsigned char *hw_addr);
 130 static unsigned char tms380tr_chk_ssb(struct net_local *tp, unsigned short IrqType);
 131 int             tms380tr_close(struct net_device *dev);
 132 static void     tms380tr_cmd_status_irq(struct net_device *dev);
 133 /* "D" */
 134 static void     tms380tr_disable_interrupts(struct net_device *dev);
 135 #if TMS380TR_DEBUG > 0
 136 static void     tms380tr_dump(unsigned char *Data, int length);
 137 #endif
 138 /* "E" */
 139 static void     tms380tr_enable_interrupts(struct net_device *dev);
 140 static void     tms380tr_exec_cmd(struct net_device *dev, unsigned short Command);
 141 static void     tms380tr_exec_sifcmd(struct net_device *dev, unsigned int WriteValue);
 142 /* "F" */
 143 /* "G" */
 144 static struct net_device_stats *tms380tr_get_stats(struct net_device *dev);
 145 /* "H" */
 146 static netdev_tx_t tms380tr_hardware_send_packet(struct sk_buff *skb,
 147                                                        struct net_device *dev);
 148 /* "I" */
 149 static int      tms380tr_init_adapter(struct net_device *dev);
 150 static void     tms380tr_init_ipb(struct net_local *tp);
 151 static void     tms380tr_init_net_local(struct net_device *dev);
 152 static void     tms380tr_init_opb(struct net_device *dev);
 153 /* "M" */
 154 /* "O" */
 155 int             tms380tr_open(struct net_device *dev);
 156 static void     tms380tr_open_adapter(struct net_device *dev);
 157 /* "P" */
 158 /* "R" */
 159 static void     tms380tr_rcv_status_irq(struct net_device *dev);
 160 static int      tms380tr_read_ptr(struct net_device *dev);
 161 static void     tms380tr_read_ram(struct net_device *dev, unsigned char *Data,
 162                         unsigned short Address, int Length);
 163 static int      tms380tr_reset_adapter(struct net_device *dev);
 164 static void     tms380tr_reset_interrupt(struct net_device *dev);
 165 static void     tms380tr_ring_status_irq(struct net_device *dev);
 166 /* "S" */
 167 static netdev_tx_t tms380tr_send_packet(struct sk_buff *skb,
 168                                               struct net_device *dev);
 169 static void     tms380tr_set_multicast_list(struct net_device *dev);
 170 static int      tms380tr_set_mac_address(struct net_device *dev, void *addr);
 171 /* "T" */
 172 static void     tms380tr_timer_chk(unsigned long data);
 173 static void     tms380tr_timer_end_wait(unsigned long data);
 174 static void     tms380tr_tx_status_irq(struct net_device *dev);
 175 /* "U" */
 176 static void     tms380tr_update_rcv_stats(struct net_local *tp,
 177                         unsigned char DataPtr[], unsigned int Length);
 178 /* "W" */
 179 void            tms380tr_wait(unsigned long time);
 180 static void     tms380tr_write_rpl_status(RPL *rpl, unsigned int Status);
 181 static void     tms380tr_write_tpl_status(TPL *tpl, unsigned int Status);
 182
 183 #define SIFREADB(reg) \
 184         (((struct net_local *)netdev_priv(dev))->sifreadb(dev, reg))
 185 #define SIFWRITEB(val, reg) \
 186         (((struct net_local *)netdev_priv(dev))->sifwriteb(dev, val, reg))
 187 #define SIFREADW(reg) \
 188         (((struct net_local *)netdev_priv(dev))->sifreadw(dev, reg))
 189 #define SIFWRITEW(val, reg) \
 190         (((struct net_local *)netdev_priv(dev))->sifwritew(dev, val, reg))
 191
 192
 193
 194 #if 0 /* TMS380TR_DEBUG > 0 */
 195 static int madgemc_sifprobe(struct net_device *dev)
 196 {
 197         unsigned char old, chk1, chk2;
 198
 199         old = SIFREADB(SIFADR);  /* Get the old SIFADR value */
 200
 201         chk1 = 0;       /* Begin with check value 0 */
 202         do {
 203                 madgemc_setregpage(dev, 0);
 204                 /* Write new SIFADR value */
 205                 SIFWRITEB(chk1, SIFADR);
 206                 chk2 = SIFREADB(SIFADR);
 207                 if (chk2 != chk1)
 208                         return -1;
 209
 210                 madgemc_setregpage(dev, 1);
 211                 /* Read, invert and write */
 212                 chk2 = SIFREADB(SIFADD);
 213                 if (chk2 != chk1)
 214                         return -1;
 215
 216                 madgemc_setregpage(dev, 0);
 217                 chk2 ^= 0x0FE;
 218                 SIFWRITEB(chk2, SIFADR);
 219
 220                 /* Read, invert and compare */
 221                 madgemc_setregpage(dev, 1);
 222                 chk2 = SIFREADB(SIFADD);
 223                 madgemc_setregpage(dev, 0);
 224                 chk2 ^= 0x0FE;
 225
 226                 if(chk1 != chk2)
 227                         return -1;    /* No adapter */
 228                 chk1 -= 2;
 229         } while(chk1 != 0);     /* Repeat 128 times (all byte values) */
 230
 231         madgemc_setregpage(dev, 0); /* sanity */
 232         /* Restore the SIFADR value */
 233         SIFWRITEB(old, SIFADR);
 234
 235         return 0;
 236 }
 237 #endif
 238
 239 /*
 240  * Open/initialize the board. This is called sometime after
 241  * booting when the 'ifconfig' program is run.
 242  *
 243  * This routine should set everything up anew at each open, even
 244  * registers that "should" only need to be set once at boot, so that
 245  * there is non-reboot way to recover if something goes wrong.
 246  */
 247 int tms380tr_open(struct net_device *dev)
 248 {
 249         struct net_local *tp = netdev_priv(dev);
 250         int err;
 251
 252         /* init the spinlock */
 253         spin_lock_init(&tp->lock);
 254         init_timer(&tp->timer);
 255
 256         /* Reset the hardware here. Don't forget to set the station address. */
 257
 258 #ifdef CONFIG_ISA
 259         if(dev->dma > 0)
 260         {
 261                 unsigned long flags=claim_dma_lock();
 262                 disable_dma(dev->dma);
 263                 set_dma_mode(dev->dma, DMA_MODE_CASCADE);
 264                 enable_dma(dev->dma);
 265                 release_dma_lock(flags);
 266         }
 267 #endif
 268
 269         err = tms380tr_chipset_init(dev);
 270         if(err)
 271         {
 272                 printk(KERN_INFO "%s: Chipset initialization error\n",
 273                         dev->name);
 274                 return -1;
 275         }
 276
 277         tp->timer.expires       = jiffies + 30*HZ;
 278         tp->timer.function      = tms380tr_timer_end_wait;
 279         tp->timer.data          = (unsigned long)dev;
 280         add_timer(&tp->timer);
 281
 282         printk(KERN_DEBUG "%s: Adapter RAM size: %dK\n",
 283                dev->name, tms380tr_read_ptr(dev));
 284
 285         tms380tr_enable_interrupts(dev);
 286         tms380tr_open_adapter(dev);
 287
 288         netif_start_queue(dev);
 289
 290         /* Wait for interrupt from hardware. If interrupt does not come,
 291          * there will be a timeout from the timer.
 292          */
 293         tp->Sleeping = 1;
 294         interruptible_sleep_on(&tp->wait_for_tok_int);
 295         del_timer(&tp->timer);
 296
 297         /* If AdapterVirtOpenFlag is 1, the adapter is now open for use */
 298         if(tp->AdapterVirtOpenFlag == 0)
 299         {
 300                 tms380tr_disable_interrupts(dev);
 301                 return -1;
 302         }
 303
 304         tp->StartTime = jiffies;
 305
 306         /* Start function control timer */
 307         tp->timer.expires       = jiffies + 2*HZ;
 308         tp->timer.function      = tms380tr_timer_chk;
 309         tp->timer.data          = (unsigned long)dev;
 310         add_timer(&tp->timer);
 311
 312         return 0;
 313 }
 314
 315 /*
 316  * Timeout function while waiting for event
 317  */
 318 static void tms380tr_timer_end_wait(unsigned long data)
 319 {
 320         struct net_device *dev = (struct net_device*)data;
 321         struct net_local *tp = netdev_priv(dev);
 322
 323         if(tp->Sleeping)
 324         {
 325                 tp->Sleeping = 0;
 326                 wake_up_interruptible(&tp->wait_for_tok_int);
 327         }
 328 }
 329
 330 /*
 331  * Initialize the chipset
 332  */
 333 static int tms380tr_chipset_init(struct net_device *dev)
 334 {
 335         struct net_local *tp = netdev_priv(dev);
 336         int err;
 337
 338         tms380tr_init_ipb(tp);
 339         tms380tr_init_opb(dev);
 340         tms380tr_init_net_local(dev);
 341
 342         if(tms380tr_debug > 3)
 343                 printk(KERN_DEBUG "%s: Resetting adapter...\n", dev->name);
 344         err = tms380tr_reset_adapter(dev);
 345         if(err < 0)
 346                 return -1;
 347
 348         if(tms380tr_debug > 3)
 349                 printk(KERN_DEBUG "%s: Bringup diags...\n", dev->name);
 350         err = tms380tr_bringup_diags(dev);
 351         if(err < 0)
 352                 return -1;
 353
 354         if(tms380tr_debug > 3)
 355                 printk(KERN_DEBUG "%s: Init adapter...\n", dev->name);
 356         err = tms380tr_init_adapter(dev);
 357         if(err < 0)
 358                 return -1;
 359
 360         if(tms380tr_debug > 3)
 361                 printk(KERN_DEBUG "%s: Done!\n", dev->name);
 362         return 0;
 363 }
 364
 365 /*
 366  * Initializes the net_local structure.
 367  */
 368 static void tms380tr_init_net_local(struct net_device *dev)
 369 {
 370         struct net_local *tp = netdev_priv(dev);
 371         int i;
 372         dma_addr_t dmabuf;
 373
 374         tp->scb.CMD     = 0;
 375         tp->scb.Parm[0] = 0;
 376         tp->scb.Parm[1] = 0;
 377
 378         tp->ssb.STS     = 0;
 379         tp->ssb.Parm[0] = 0;
 380         tp->ssb.Parm[1] = 0;
 381         tp->ssb.Parm[2] = 0;
 382
 383         tp->CMDqueue    = 0;
 384
 385         tp->AdapterOpenFlag     = 0;
 386         tp->AdapterVirtOpenFlag = 0;
 387         tp->ScbInUse            = 0;
 388         tp->OpenCommandIssued   = 0;
 389         tp->ReOpenInProgress    = 0;
 390         tp->HaltInProgress      = 0;
 391         tp->TransmitHaltScheduled = 0;
 392         tp->LobeWireFaultLogged = 0;
 393         tp->LastOpenStatus      = 0;
 394         tp->MaxPacketSize       = DEFAULT_PACKET_SIZE;
 395
 396         /* Create circular chain of transmit lists */
 397         for (i = 0; i < TPL_NUM; i++)
 398         {
 399                 tp->Tpl[i].NextTPLAddr = htonl(((char *)(&tp->Tpl[(i+1) % TPL_NUM]) - (char *)tp) + tp->dmabuffer); /* DMA buffer may be MMU driven */
 400                 tp->Tpl[i].Status       = 0;
 401                 tp->Tpl[i].FrameSize    = 0;
 402                 tp->Tpl[i].FragList[0].DataCount        = 0;
 403                 tp->Tpl[i].FragList[0].DataAddr         = 0;
 404                 tp->Tpl[i].NextTPLPtr   = &tp->Tpl[(i+1) % TPL_NUM];
 405                 tp->Tpl[i].MData        = NULL;
 406                 tp->Tpl[i].TPLIndex     = i;
 407                 tp->Tpl[i].DMABuff      = 0;
 408                 tp->Tpl[i].BusyFlag     = 0;
 409         }
 410
 411         tp->TplFree = tp->TplBusy = &tp->Tpl[0];
 412
 413         /* Create circular chain of receive lists */
 414         for (i = 0; i < RPL_NUM; i++)
 415         {
 416                 tp->Rpl[i].NextRPLAddr = htonl(((char *)(&tp->Rpl[(i+1) % RPL_NUM]) - (char *)tp) + tp->dmabuffer); /* DMA buffer may be MMU driven */
 417                 tp->Rpl[i].Status = (RX_VALID | RX_START_FRAME | RX_END_FRAME | RX_FRAME_IRQ);
 418                 tp->Rpl[i].FrameSize = 0;
 419                 tp->Rpl[i].FragList[0].DataCount = cpu_to_be16((unsigned short)tp->MaxPacketSize);
 420
 421                 /* Alloc skb and point adapter to data area */
 422                 tp->Rpl[i].Skb = dev_alloc_skb(tp->MaxPacketSize);
 423                         tp->Rpl[i].DMABuff = 0;
 424
 425                 /* skb == NULL ? then use local buffer */
 426                 if(tp->Rpl[i].Skb == NULL)
 427                 {
 428                         tp->Rpl[i].SkbStat = SKB_UNAVAILABLE;
 429                         tp->Rpl[i].FragList[0].DataAddr = htonl(((char *)tp->LocalRxBuffers[i] - (char *)tp) + tp->dmabuffer);
 430                         tp->Rpl[i].MData = tp->LocalRxBuffers[i];
 431                 }
 432                 else    /* SKB != NULL */
 433                 {
 434                         tp->Rpl[i].Skb->dev = dev;
 435                         skb_put(tp->Rpl[i].Skb, tp->MaxPacketSize);
 436
 437                         /* data unreachable for DMA ? then use local buffer */
 438                         dmabuf = dma_map_single(tp->pdev, tp->Rpl[i].Skb->data, tp->MaxPacketSize, DMA_FROM_DEVICE);
 439                         if(tp->dmalimit && (dmabuf + tp->MaxPacketSize > tp->dmalimit))
 440                         {
 441                                 tp->Rpl[i].SkbStat = SKB_DATA_COPY;
 442                                 tp->Rpl[i].FragList[0].DataAddr = htonl(((char *)tp->LocalRxBuffers[i] - (char *)tp) + tp->dmabuffer);
 443                                 tp->Rpl[i].MData = tp->LocalRxBuffers[i];
 444                         }
 445                         else    /* DMA directly in skb->data */
 446                         {
 447                                 tp->Rpl[i].SkbStat = SKB_DMA_DIRECT;
 448                                 tp->Rpl[i].FragList[0].DataAddr = htonl(dmabuf);
 449                                 tp->Rpl[i].MData = tp->Rpl[i].Skb->data;
 450                                 tp->Rpl[i].DMABuff = dmabuf;
 451                         }
 452                 }
 453
 454                 tp->Rpl[i].NextRPLPtr = &tp->Rpl[(i+1) % RPL_NUM];
 455                 tp->Rpl[i].RPLIndex = i;
 456         }
 457
 458         tp->RplHead = &tp->Rpl[0];
 459         tp->RplTail = &tp->Rpl[RPL_NUM-1];
 460         tp->RplTail->Status = (RX_START_FRAME | RX_END_FRAME | RX_FRAME_IRQ);
 461 }
 462
 463 /*
 464  * Initializes the initialisation parameter block.
 465  */
 466 static void tms380tr_init_ipb(struct net_local *tp)
 467 {
 468         tp->ipb.Init_Options    = BURST_MODE;
 469         tp->ipb.CMD_Status_IV   = 0;
 470         tp->ipb.TX_IV           = 0;
 471         tp->ipb.RX_IV           = 0;
 472         tp->ipb.Ring_Status_IV  = 0;
 473         tp->ipb.SCB_Clear_IV    = 0;
 474         tp->ipb.Adapter_CHK_IV  = 0;
 475         tp->ipb.RX_Burst_Size   = BURST_SIZE;
 476         tp->ipb.TX_Burst_Size   = BURST_SIZE;
 477         tp->ipb.DMA_Abort_Thrhld = DMA_RETRIES;
 478         tp->ipb.SCB_Addr        = 0;
 479         tp->ipb.SSB_Addr        = 0;
 480 }
 481
 482 /*
 483  * Initializes the open parameter block.
 484  */
 485 static void tms380tr_init_opb(struct net_device *dev)
 486 {
 487         struct net_local *tp;
 488         unsigned long Addr;
 489         unsigned short RplSize    = RPL_SIZE;
 490         unsigned short TplSize    = TPL_SIZE;
 491         unsigned short BufferSize = BUFFER_SIZE;
 492         int i;
 493
 494         tp = netdev_priv(dev);
 495
 496         tp->ocpl.OPENOptions     = 0;
 497         tp->ocpl.OPENOptions    |= ENABLE_FULL_DUPLEX_SELECTION;
 498         tp->ocpl.FullDuplex      = 0;
 499         tp->ocpl.FullDuplex     |= OPEN_FULL_DUPLEX_OFF;
 500
 501         /*
 502          * Set node address
 503          *
 504          * We go ahead and put it in the OPB even though on
 505          * most of the generic adapters this isn't required.
 506          * Its simpler this way.  -- ASF
 507          */
 508         for (i=0;i<6;i++)
 509                 tp->ocpl.NodeAddr[i] = ((unsigned char *)dev->dev_addr)[i];
 510
 511         tp->ocpl.GroupAddr       = 0;
 512         tp->ocpl.FunctAddr       = 0;
 513         tp->ocpl.RxListSize      = cpu_to_be16((unsigned short)RplSize);
 514         tp->ocpl.TxListSize      = cpu_to_be16((unsigned short)TplSize);
 515         tp->ocpl.BufSize         = cpu_to_be16((unsigned short)BufferSize);
 516         tp->ocpl.Reserved        = 0;
 517         tp->ocpl.TXBufMin        = TX_BUF_MIN;
 518         tp->ocpl.TXBufMax        = TX_BUF_MAX;
 519
 520         Addr = htonl(((char *)tp->ProductID - (char *)tp) + tp->dmabuffer);
 521
 522         tp->ocpl.ProdIDAddr[0]   = LOWORD(Addr);
 523         tp->ocpl.ProdIDAddr[1]   = HIWORD(Addr);
 524 }
 525
 526 /*
 527  * Send OPEN command to adapter
 528  */
 529 static void tms380tr_open_adapter(struct net_device *dev)
 530 {
 531         struct net_local *tp = netdev_priv(dev);
 532
 533         if(tp->OpenCommandIssued)
 534                 return;
 535
 536         tp->OpenCommandIssued = 1;
 537         tms380tr_exec_cmd(dev, OC_OPEN);
 538 }
 539
 540 /*
 541  * Clear the adapter's interrupt flag. Clear system interrupt enable
 542  * (SINTEN): disable adapter to system interrupts.
 543  */
 544 static void tms380tr_disable_interrupts(struct net_device *dev)
 545 {
 546         SIFWRITEB(0, SIFACL);
 547 }
 548
 549 /*
 550  * Set the adapter's interrupt flag. Set system interrupt enable
 551  * (SINTEN): enable adapter to system interrupts.
 552  */
 553 static void tms380tr_enable_interrupts(struct net_device *dev)
 554 {
 555         SIFWRITEB(ACL_SINTEN, SIFACL);
 556 }
 557
 558 /*
 559  * Put command in command queue, try to execute it.
 560  */
 561 static void tms380tr_exec_cmd(struct net_device *dev, unsigned short Command)
 562 {
 563         struct net_local *tp = netdev_priv(dev);
 564
 565         tp->CMDqueue |= Command;
 566         tms380tr_chk_outstanding_cmds(dev);
 567 }
 568
 569 static void tms380tr_timeout(struct net_device *dev)
 570 {
 571         /*
 572          * If we get here, some higher level has decided we are broken.
 573          * There should really be a "kick me" function call instead.
 574          *
 575          * Resetting the token ring adapter takes a long time so just
 576          * fake transmission time and go on trying. Our own timeout
 577          * routine is in tms380tr_timer_chk()
 578          */
 579         dev->trans_start = jiffies; /* prevent tx timeout */
 580         netif_wake_queue(dev);
 581 }
 582
 583 /*
 584  * Gets skb from system, queues it and checks if it can be sent
 585  */
 586 static netdev_tx_t tms380tr_send_packet(struct sk_buff *skb,
 587                                               struct net_device *dev)
 588 {
 589         struct net_local *tp = netdev_priv(dev);
 590         netdev_tx_t rc;
 591
 592         rc = tms380tr_hardware_send_packet(skb, dev);
 593         if(tp->TplFree->NextTPLPtr->BusyFlag)
 594                 netif_stop_queue(dev);
 595         return rc;
 596 }
 597
 598 /*
 599  * Move frames into adapter tx queue
 600  */
 601 static netdev_tx_t tms380tr_hardware_send_packet(struct sk_buff *skb,
 602                                                        struct net_device *dev)
 603 {
 604         TPL *tpl;
 605         short length;
 606         unsigned char *buf;
 607         unsigned long flags;
 608         int i;
 609         dma_addr_t dmabuf, newbuf;
 610         struct net_local *tp = netdev_priv(dev);
 611
 612         /* Try to get a free TPL from the chain.
 613          *
 614          * NOTE: We *must* always leave one unused TPL in the chain,
 615          * because otherwise the adapter might send frames twice.
 616          */
 617         spin_lock_irqsave(&tp->lock, flags);
 618         if(tp->TplFree->NextTPLPtr->BusyFlag)  { /* No free TPL */
 619                 if (tms380tr_debug > 0)
 620                         printk(KERN_DEBUG "%s: No free TPL\n", dev->name);
 621                 spin_unlock_irqrestore(&tp->lock, flags);
 622                 return NETDEV_TX_BUSY;
 623         }
 624
 625         dmabuf = 0;
 626
 627         /* Is buffer reachable for Busmaster-DMA? */
 628
 629         length  = skb->len;
 630         dmabuf = dma_map_single(tp->pdev, skb->data, length, DMA_TO_DEVICE);
 631         if(tp->dmalimit && (dmabuf + length > tp->dmalimit)) {
 632                 /* Copy frame to local buffer */
 633                 dma_unmap_single(tp->pdev, dmabuf, length, DMA_TO_DEVICE);
 634                 dmabuf  = 0;
 635                 i       = tp->TplFree->TPLIndex;
 636                 buf     = tp->LocalTxBuffers[i];
 637                 skb_copy_from_linear_data(skb, buf, length);
 638                 newbuf  = ((char *)buf - (char *)tp) + tp->dmabuffer;
 639         }
 640         else {
 641                 /* Send direct from skb->data */
 642                 newbuf  = dmabuf;
 643                 buf     = skb->data;
 644         }
 645         /* Source address in packet? */
 646         tms380tr_chk_src_addr(buf, dev->dev_addr);
 647         tp->LastSendTime        = jiffies;
 648         tpl                     = tp->TplFree;  /* Get the "free" TPL */
 649         tpl->BusyFlag           = 1;            /* Mark TPL as busy */
 650         tp->TplFree             = tpl->NextTPLPtr;
 651
 652         /* Save the skb for delayed return of skb to system */
 653         tpl->Skb = skb;
 654         tpl->DMABuff = dmabuf;
 655         tpl->FragList[0].DataCount = cpu_to_be16((unsigned short)length);
 656         tpl->FragList[0].DataAddr  = htonl(newbuf);
 657
 658         /* Write the data length in the transmit list. */
 659         tpl->FrameSize  = cpu_to_be16((unsigned short)length);
 660         tpl->MData      = buf;
 661
 662         /* Transmit the frame and set the status values. */
 663         tms380tr_write_tpl_status(tpl, TX_VALID | TX_START_FRAME
 664                                 | TX_END_FRAME | TX_PASS_SRC_ADDR
 665                                 | TX_FRAME_IRQ);
 666
 667         /* Let adapter send the frame. */
 668         tms380tr_exec_sifcmd(dev, CMD_TX_VALID);
 669         spin_unlock_irqrestore(&tp->lock, flags);
 670
 671         return NETDEV_TX_OK;
 672 }
 673
 674 /*
 675  * Write the given value to the 'Status' field of the specified TPL.
 676  * NOTE: This function should be used whenever the status of any TPL must be
 677  * modified by the driver, because the compiler may otherwise change the
 678  * order of instructions such that writing the TPL status may be executed at
 679  * an undesirable time. When this function is used, the status is always
 680  * written when the function is called.
 681  */
 682 static void tms380tr_write_tpl_status(TPL *tpl, unsigned int Status)
 683 {
 684         tpl->Status = Status;
 685 }
 686
 687 static void tms380tr_chk_src_addr(unsigned char *frame, unsigned char *hw_addr)
 688 {
 689         unsigned char SRBit;
 690
 691         if((((unsigned long)frame[8]) & ~0x80) != 0)    /* Compare 4 bytes */
 692                 return;
 693         if((unsigned short)frame[12] != 0)              /* Compare 2 bytes */
 694                 return;
 695
 696         SRBit = frame[8] & 0x80;
 697         memcpy(&frame[8], hw_addr, 6);
 698         frame[8] |= SRBit;
 699 }
 700
 701 /*
 702  * The timer routine: Check if adapter still open and working, reopen if not.
 703  */
 704 static void tms380tr_timer_chk(unsigned long data)
 705 {
 706         struct net_device *dev = (struct net_device*)data;
 707         struct net_local *tp = netdev_priv(dev);
 708
 709         if(tp->HaltInProgress)
 710                 return;
 711
 712         tms380tr_chk_outstanding_cmds(dev);
 713         if(time_before(tp->LastSendTime + SEND_TIMEOUT, jiffies) &&
 714            (tp->TplFree != tp->TplBusy))
 715         {
 716                 /* Anything to send, but stalled too long */
 717                 tp->LastSendTime = jiffies;
 718                 tms380tr_exec_cmd(dev, OC_CLOSE);       /* Does reopen automatically */
 719         }
 720
 721         tp->timer.expires = jiffies + 2*HZ;
 722         add_timer(&tp->timer);
 723
 724         if(tp->AdapterOpenFlag || tp->ReOpenInProgress)
 725                 return;
 726         tp->ReOpenInProgress = 1;
 727         tms380tr_open_adapter(dev);
 728 }
 729
 730 /*
 731  * The typical workload of the driver: Handle the network interface interrupts.
 732  */
 733 irqreturn_t tms380tr_interrupt(int irq, void *dev_id)
 734 {
 735         struct net_device *dev = dev_id;
 736         struct net_local *tp;
 737         unsigned short irq_type;
 738         int handled = 0;
 739
 740         tp = netdev_priv(dev);
 741
 742         irq_type = SIFREADW(SIFSTS);
 743
 744         while(irq_type & STS_SYSTEM_IRQ) {
 745                 handled = 1;
 746                 irq_type &= STS_IRQ_MASK;
 747
 748                 if(!tms380tr_chk_ssb(tp, irq_type)) {
 749                         printk(KERN_DEBUG "%s: DATA LATE occurred\n", dev->name);
 750                         break;
 751                 }
 752
 753                 switch(irq_type) {
 754                 case STS_IRQ_RECEIVE_STATUS:
 755                         tms380tr_reset_interrupt(dev);
 756                         tms380tr_rcv_status_irq(dev);
 757                         break;
 758
 759                 case STS_IRQ_TRANSMIT_STATUS:
 760                         /* Check if TRANSMIT.HALT command is complete */
 761                         if(tp->ssb.Parm[0] & COMMAND_COMPLETE) {
 762                                 tp->TransmitCommandActive = 0;
 763                                         tp->TransmitHaltScheduled = 0;
 764
 765                                         /* Issue a new transmit command. */
 766                                         tms380tr_exec_cmd(dev, OC_TRANSMIT);
 767                                 }
 768
 769                                 tms380tr_reset_interrupt(dev);
 770                                 tms380tr_tx_status_irq(dev);
 771                                 break;
 772
 773                 case STS_IRQ_COMMAND_STATUS:
 774                         /* The SSB contains status of last command
 775                          * other than receive/transmit.
 776                          */
 777                         tms380tr_cmd_status_irq(dev);
 778                         break;
 779
 780                 case STS_IRQ_SCB_CLEAR:
 781                         /* The SCB is free for another command. */
 782                         tp->ScbInUse = 0;
 783                         tms380tr_chk_outstanding_cmds(dev);
 784                         break;
 785
 786                 case STS_IRQ_RING_STATUS:
 787                         tms380tr_ring_status_irq(dev);
 788                         break;
 789
 790                 case STS_IRQ_ADAPTER_CHECK:
 791                         tms380tr_chk_irq(dev);
 792                         break;
 793
 794                 case STS_IRQ_LLC_STATUS:
 795                         printk(KERN_DEBUG "tms380tr: unexpected LLC status IRQ\n");
 796                         break;
 797
 798                 case STS_IRQ_TIMER:
 799                         printk(KERN_DEBUG "tms380tr: unexpected Timer IRQ\n");
 800                         break;
 801
 802                 case STS_IRQ_RECEIVE_PENDING:
 803                         printk(KERN_DEBUG "tms380tr: unexpected Receive Pending IRQ\n");
 804                         break;
 805
 806                 default:
 807                         printk(KERN_DEBUG "Unknown Token Ring IRQ (0x%04x)\n", irq_type);
 808                         break;
 809                 }
 810
 811                 /* Reset system interrupt if not already done. */
 812                 if(irq_type != STS_IRQ_TRANSMIT_STATUS &&
 813                    irq_type != STS_IRQ_RECEIVE_STATUS) {
 814                         tms380tr_reset_interrupt(dev);
 815                 }
 816
 817                 irq_type = SIFREADW(SIFSTS);
 818         }
 819
 820         return IRQ_RETVAL(handled);
 821 }
 822
 823 /*
 824  *  Reset the INTERRUPT SYSTEM bit and issue SSB CLEAR command.
 825  */
 826 static void tms380tr_reset_interrupt(struct net_device *dev)
 827 {
 828         struct net_local *tp = netdev_priv(dev);
 829         SSB *ssb = &tp->ssb;
 830
 831         /*
 832          * [Workaround for "Data Late"]
 833          * Set all fields of the SSB to well-defined values so we can
 834          * check if the adapter has written the SSB.
 835          */
 836
 837         ssb->STS        = (unsigned short) -1;
 838         ssb->Parm[0]    = (unsigned short) -1;
 839         ssb->Parm[1]    = (unsigned short) -1;
 840         ssb->Parm[2]    = (unsigned short) -1;
 841
 842         /* Free SSB by issuing SSB_CLEAR command after reading IRQ code
 843          * and clear STS_SYSTEM_IRQ bit: enable adapter for further interrupts.
 844          */
 845         tms380tr_exec_sifcmd(dev, CMD_SSB_CLEAR | CMD_CLEAR_SYSTEM_IRQ);
 846 }
 847
 848 /*
 849  * Check if the SSB has actually been written by the adapter.
 850  */
 851 static unsigned char tms380tr_chk_ssb(struct net_local *tp, unsigned short IrqType)
 852 {
 853         SSB *ssb = &tp->ssb;    /* The address of the SSB. */
 854
 855         /* C 0 1 2 INTERRUPT CODE
 856          * - - - - --------------
 857          * 1 1 1 1 TRANSMIT STATUS
 858          * 1 1 1 1 RECEIVE STATUS
 859          * 1 ? ? 0 COMMAND STATUS
 860          * 0 0 0 0 SCB CLEAR
 861          * 1 1 0 0 RING STATUS
 862          * 0 0 0 0 ADAPTER CHECK
 863          *
 864          * 0 = SSB field not affected by interrupt
 865          * 1 = SSB field is affected by interrupt
 866          *
 867          * C = SSB ADDRESS +0: COMMAND
 868          * 0 = SSB ADDRESS +2: STATUS 0
 869          * 1 = SSB ADDRESS +4: STATUS 1
 870          * 2 = SSB ADDRESS +6: STATUS 2
 871          */
 872
 873         /* Check if this interrupt does use the SSB. */
 874
 875         if(IrqType != STS_IRQ_TRANSMIT_STATUS &&
 876            IrqType != STS_IRQ_RECEIVE_STATUS &&
 877            IrqType != STS_IRQ_COMMAND_STATUS &&
 878            IrqType != STS_IRQ_RING_STATUS)
 879         {
 880                 return 1;       /* SSB not involved. */
 881         }
 882
 883         /* Note: All fields of the SSB have been set to all ones (-1) after it
 884          * has last been used by the software (see DriverIsr()).
 885          *
 886          * Check if the affected SSB fields are still unchanged.
 887          */
 888
 889         if(ssb->STS == (unsigned short) -1)
 890                 return 0;       /* Command field not yet available. */
 891         if(IrqType == STS_IRQ_COMMAND_STATUS)
 892                 return 1;       /* Status fields not always affected. */
 893         if(ssb->Parm[0] == (unsigned short) -1)
 894                 return 0;       /* Status 1 field not yet available. */
 895         if(IrqType == STS_IRQ_RING_STATUS)
 896                 return 1;       /* Status 2 & 3 fields not affected. */
 897
 898         /* Note: At this point, the interrupt is either TRANSMIT or RECEIVE. */
 899         if(ssb->Parm[1] == (unsigned short) -1)
 900                 return 0;       /* Status 2 field not yet available. */
 901         if(ssb->Parm[2] == (unsigned short) -1)
 902                 return 0;       /* Status 3 field not yet available. */
 903
 904         return 1;       /* All SSB fields have been written by the adapter. */
 905 }
 906
 907 /*
 908  * Evaluates the command results status in the SSB status field.
 909  */
 910 static void tms380tr_cmd_status_irq(struct net_device *dev)
 911 {
 912         struct net_local *tp = netdev_priv(dev);
 913         unsigned short ssb_cmd, ssb_parm_0;
 914         unsigned short ssb_parm_1;
 915         char *open_err = "Open error -";
 916         char *code_err = "Open code -";
 917
 918         /* Copy the ssb values to local variables */
 919         ssb_cmd    = tp->ssb.STS;
 920         ssb_parm_0 = tp->ssb.Parm[0];
 921         ssb_parm_1 = tp->ssb.Parm[1];
 922
 923         if(ssb_cmd == OPEN)
 924         {
 925                 tp->Sleeping = 0;
 926                 if(!tp->ReOpenInProgress)
 927                         wake_up_interruptible(&tp->wait_for_tok_int);
 928
 929                 tp->OpenCommandIssued = 0;
 930                 tp->ScbInUse = 0;
 931
 932                 if((ssb_parm_0 & 0x00FF) == GOOD_COMPLETION)
 933                 {
 934                         /* Success, the adapter is open. */
 935                         tp->LobeWireFaultLogged = 0;
 936                         tp->AdapterOpenFlag     = 1;
 937                         tp->AdapterVirtOpenFlag = 1;
 938                         tp->TransmitCommandActive = 0;
 939                         tms380tr_exec_cmd(dev, OC_TRANSMIT);
 940                         tms380tr_exec_cmd(dev, OC_RECEIVE);
 941
 942                         if(tp->ReOpenInProgress)
 943                                 tp->ReOpenInProgress = 0;
 944
 945                         return;
 946                 }
 947                 else    /* The adapter did not open. */
 948                 {
 949                         if(ssb_parm_0 & NODE_ADDR_ERROR)
 950                                 printk(KERN_INFO "%s: Node address error\n",
 951                                         dev->name);
 952                         if(ssb_parm_0 & LIST_SIZE_ERROR)
 953                                 printk(KERN_INFO "%s: List size error\n",
 954                                         dev->name);
 955                         if(ssb_parm_0 & BUF_SIZE_ERROR)
 956                                 printk(KERN_INFO "%s: Buffer size error\n",
 957                                         dev->name);
 958                         if(ssb_parm_0 & TX_BUF_COUNT_ERROR)
 959                                 printk(KERN_INFO "%s: Tx buffer count error\n",
 960                                         dev->name);
 961                         if(ssb_parm_0 & INVALID_OPEN_OPTION)
 962                                 printk(KERN_INFO "%s: Invalid open option\n",
 963                                         dev->name);
 964                         if(ssb_parm_0 & OPEN_ERROR)
 965                         {
 966                                 /* Show the open phase. */
 967                                 switch(ssb_parm_0 & OPEN_PHASES_MASK)
 968                                 {
 969                                         case LOBE_MEDIA_TEST:
 970                                                 if(!tp->LobeWireFaultLogged)
 971                                                 {
 972                                                         tp->LobeWireFaultLogged = 1;
 973                                                         printk(KERN_INFO "%s: %s Lobe wire fault (check cable !).\n", dev->name, open_err);
 974                                                 }
 975                                                 tp->ReOpenInProgress    = 1;
 976                                                 tp->AdapterOpenFlag     = 0;
 977                                                 tp->AdapterVirtOpenFlag = 1;
 978                                                 tms380tr_open_adapter(dev);
 979                                                 return;
 980
 981                                         case PHYSICAL_INSERTION:
 982                                                 printk(KERN_INFO "%s: %s Physical insertion.\n", dev->name, open_err);
 983                                                 break;
 984
 985                                         case ADDRESS_VERIFICATION:
 986                                                 printk(KERN_INFO "%s: %s Address verification.\n", dev->name, open_err);
 987                                                 break;
 988
 989                                         case PARTICIPATION_IN_RING_POLL:
 990                                                 printk(KERN_INFO "%s: %s Participation in ring poll.\n", dev->name, open_err);
 991                                                 break;
 992
 993                                         case REQUEST_INITIALISATION:
 994                                                 printk(KERN_INFO "%s: %s Request initialisation.\n", dev->name, open_err);
 995                                                 break;
 996
 997                                         case FULLDUPLEX_CHECK:
 998                                                 printk(KERN_INFO "%s: %s Full duplex check.\n", dev->name, open_err);
 999                                                 break;
1000
1001                                         default:
1002                                                 printk(KERN_INFO "%s: %s Unknown open phase\n", dev->name, open_err);
1003                                                 break;
1004                                 }
1005
1006                                 /* Show the open errors. */
1007                                 switch(ssb_parm_0 & OPEN_ERROR_CODES_MASK)
1008                                 {
1009                                         case OPEN_FUNCTION_FAILURE:
1010                                                 printk(KERN_INFO "%s: %s OPEN_FUNCTION_FAILURE", dev->name, code_err);
1011                                                 tp->LastOpenStatus =
1012                                                         OPEN_FUNCTION_FAILURE;
1013                                                 break;
1014
1015                                         case OPEN_SIGNAL_LOSS:
1016                                                 printk(KERN_INFO "%s: %s OPEN_SIGNAL_LOSS\n", dev->name, code_err);
1017                                                 tp->LastOpenStatus =
1018                                                         OPEN_SIGNAL_LOSS;
1019                                                 break;
1020
1021                                         case OPEN_TIMEOUT:
1022                                                 printk(KERN_INFO "%s: %s OPEN_TIMEOUT\n", dev->name, code_err);
1023                                                 tp->LastOpenStatus =
1024                                                         OPEN_TIMEOUT;
1025                                                 break;
1026
1027                                         case OPEN_RING_FAILURE:
1028                                                 printk(KERN_INFO "%s: %s OPEN_RING_FAILURE\n", dev->name, code_err);
1029                                                 tp->LastOpenStatus =
1030                                                         OPEN_RING_FAILURE;
1031                                                 break;
1032
1033                                         case OPEN_RING_BEACONING:
1034                                                 printk(KERN_INFO "%s: %s OPEN_RING_BEACONING\n", dev->name, code_err);
1035                                                 tp->LastOpenStatus =
1036                                                         OPEN_RING_BEACONING;
1037                                                 break;
1038
1039                                         case OPEN_DUPLICATE_NODEADDR:
1040                                                 printk(KERN_INFO "%s: %s OPEN_DUPLICATE_NODEADDR\n", dev->name, code_err);
1041                                                 tp->LastOpenStatus =
1042                                                         OPEN_DUPLICATE_NODEADDR;
1043                                                 break;
1044
1045                                         case OPEN_REQUEST_INIT:
1046                                                 printk(KERN_INFO "%s: %s OPEN_REQUEST_INIT\n", dev->name, code_err);
1047                                                 tp->LastOpenStatus =
1048                                                         OPEN_REQUEST_INIT;
1049                                                 break;
1050
1051                                         case OPEN_REMOVE_RECEIVED:
1052                                                 printk(KERN_INFO "%s: %s OPEN_REMOVE_RECEIVED", dev->name, code_err);
1053                                                 tp->LastOpenStatus =
1054                                                         OPEN_REMOVE_RECEIVED;
1055                                                 break;
1056
1057                                         case OPEN_FULLDUPLEX_SET:
1058                                                 printk(KERN_INFO "%s: %s OPEN_FULLDUPLEX_SET\n", dev->name, code_err);
1059                                                 tp->LastOpenStatus =
1060                                                         OPEN_FULLDUPLEX_SET;
1061                                                 break;
1062
1063                                         default:
1064                                                 printk(KERN_INFO "%s: %s Unknown open err code", dev->name, code_err);
1065                                                 tp->LastOpenStatus =
1066                                                         OPEN_FUNCTION_FAILURE;
1067                                                 break;
1068                                 }
1069                         }
1070
1071                         tp->AdapterOpenFlag     = 0;
1072                         tp->AdapterVirtOpenFlag = 0;
1073
1074                         return;
1075                 }
1076         }
1077         else
1078         {
1079                 if(ssb_cmd != READ_ERROR_LOG)
1080                         return;
1081
1082                 /* Add values from the error log table to the MAC
1083                  * statistics counters and update the errorlogtable
1084                  * memory.
1085                  */
1086                 tp->MacStat.line_errors += tp->errorlogtable.Line_Error;
1087                 tp->MacStat.burst_errors += tp->errorlogtable.Burst_Error;
1088                 tp->MacStat.A_C_errors += tp->errorlogtable.ARI_FCI_Error;
1089                 tp->MacStat.lost_frames += tp->errorlogtable.Lost_Frame_Error;
1090                 tp->MacStat.recv_congest_count += tp->errorlogtable.Rx_Congest_Error;
1091                 tp->MacStat.rx_errors += tp->errorlogtable.Rx_Congest_Error;
1092                 tp->MacStat.frame_copied_errors += tp->errorlogtable.Frame_Copied_Error;
1093                 tp->MacStat.token_errors += tp->errorlogtable.Token_Error;
1094                 tp->MacStat.dummy1 += tp->errorlogtable.DMA_Bus_Error;
1095                 tp->MacStat.dummy1 += tp->errorlogtable.DMA_Parity_Error;
1096                 tp->MacStat.abort_delimiters += tp->errorlogtable.AbortDelimeters;
1097                 tp->MacStat.frequency_errors += tp->errorlogtable.Frequency_Error;
1098                 tp->MacStat.internal_errors += tp->errorlogtable.Internal_Error;
1099         }
1100 }
1101
1102 /*
1103  * The inverse routine to tms380tr_open().
1104  */
1105 int tms380tr_close(struct net_device *dev)
1106 {
1107         struct net_local *tp = netdev_priv(dev);
1108         netif_stop_queue(dev);
1109
1110         del_timer(&tp->timer);
1111
1112         /* Flush the Tx and disable Rx here. */
1113
1114         tp->HaltInProgress      = 1;
1115         tms380tr_exec_cmd(dev, OC_CLOSE);
1116         tp->timer.expires       = jiffies + 1*HZ;
1117         tp->timer.function      = tms380tr_timer_end_wait;
1118         tp->timer.data          = (unsigned long)dev;
1119         add_timer(&tp->timer);
1120
1121         tms380tr_enable_interrupts(dev);
1122
1123         tp->Sleeping = 1;
1124         interruptible_sleep_on(&tp->wait_for_tok_int);
1125         tp->TransmitCommandActive = 0;
1126
1127         del_timer(&tp->timer);
1128         tms380tr_disable_interrupts(dev);
1129
1130 #ifdef CONFIG_ISA
1131         if(dev->dma > 0)
1132         {
1133                 unsigned long flags=claim_dma_lock();
1134                 disable_dma(dev->dma);
1135                 release_dma_lock(flags);
1136         }
1137 #endif
1138
1139         SIFWRITEW(0xFF00, SIFCMD);
1140 #if 0
1141         if(dev->dma > 0) /* what the? */
1142                 SIFWRITEB(0xff, POSREG);
1143 #endif
1144         tms380tr_cancel_tx_queue(tp);
1145
1146         return 0;
1147 }
1148
1149 /*
1150  * Get the current statistics. This may be called with the card open
1151  * or closed.
1152  */
1153 static struct net_device_stats *tms380tr_get_stats(struct net_device *dev)
1154 {
1155         struct net_local *tp = netdev_priv(dev);
1156
1157         return (struct net_device_stats *)&tp->MacStat;
1158 }
1159
1160 /*
1161  * Set or clear the multicast filter for this adapter.
1162  */
1163 static void tms380tr_set_multicast_list(struct net_device *dev)
1164 {
1165         struct net_local *tp = netdev_priv(dev);
1166         unsigned int OpenOptions;
1167
1168         OpenOptions = tp->ocpl.OPENOptions &
1169                 ~(PASS_ADAPTER_MAC_FRAMES
1170                   | PASS_ATTENTION_FRAMES
1171                   | PASS_BEACON_MAC_FRAMES
1172                   | COPY_ALL_MAC_FRAMES
1173                   | COPY_ALL_NON_MAC_FRAMES);
1174
1175         tp->ocpl.FunctAddr = 0;
1176
1177         if(dev->flags & IFF_PROMISC)
1178                 /* Enable promiscuous mode */
1179                 OpenOptions |= COPY_ALL_NON_MAC_FRAMES |
1180                         COPY_ALL_MAC_FRAMES;
1181         else
1182         {
1183                 if(dev->flags & IFF_ALLMULTI)
1184                 {
1185                         /* Disable promiscuous mode, use normal mode. */
1186                         tp->ocpl.FunctAddr = 0xFFFFFFFF;
1187                 }
1188                 else
1189                 {
1190                         struct netdev_hw_addr *ha;
1191
1192                         netdev_for_each_mc_addr(ha, dev) {
1193                                 ((char *)(&tp->ocpl.FunctAddr))[0] |=
1194                                         ha->addr[2];
1195                                 ((char *)(&tp->ocpl.FunctAddr))[1] |=
1196                                         ha->addr[3];
1197                                 ((char *)(&tp->ocpl.FunctAddr))[2] |=
1198                                         ha->addr[4];
1199                                 ((char *)(&tp->ocpl.FunctAddr))[3] |=
1200                                         ha->addr[5];
1201                         }
1202                 }
1203                 tms380tr_exec_cmd(dev, OC_SET_FUNCT_ADDR);
1204         }
1205
1206         tp->ocpl.OPENOptions = OpenOptions;
1207         tms380tr_exec_cmd(dev, OC_MODIFY_OPEN_PARMS);
1208 }
1209
1210 /*
1211  * Wait for some time (microseconds)
1212  */
1213 void tms380tr_wait(unsigned long time)
1214 {
1215 #if 0
1216         long tmp;
1217
1218         tmp = jiffies + time/(1000000/HZ);
1219         do {
1220                 tmp = schedule_timeout_interruptible(tmp);
1221         } while(time_after(tmp, jiffies));
1222 #else
1223         mdelay(time / 1000);
1224 #endif
1225 }
1226
1227 /*
1228  * Write a command value to the SIFCMD register
1229  */
1230 static void tms380tr_exec_sifcmd(struct net_device *dev, unsigned int WriteValue)
1231 {
1232         unsigned short cmd;
1233         unsigned short SifStsValue;
1234         unsigned long loop_counter;
1235
1236         WriteValue = ((WriteValue ^ CMD_SYSTEM_IRQ) | CMD_INTERRUPT_ADAPTER);
1237         cmd = (unsigned short)WriteValue;
1238         loop_counter = 0,5 * 800000;
1239         do {
1240                 SifStsValue = SIFREADW(SIFSTS);
1241         } while((SifStsValue & CMD_INTERRUPT_ADAPTER) && loop_counter--);
1242         SIFWRITEW(cmd, SIFCMD);
1243 }
1244
1245 /*
1246  * Processes adapter hardware reset, halts adapter and downloads firmware,
1247  * clears the halt bit.
1248  */
1249 static int tms380tr_reset_adapter(struct net_device *dev)
1250 {
1251         struct net_local *tp = netdev_priv(dev);
1252         unsigned short *fw_ptr;
1253         unsigned short count, c, count2;
1254         const struct firmware *fw_entry = NULL;
1255
1256         if (request_firmware(&fw_entry, "tms380tr.bin", tp->pdev) != 0) {
1257                 printk(KERN_ALERT "%s: firmware %s is missing, cannot start.\n",
1258                         dev->name, "tms380tr.bin");
1259                 return -1;
1260         }
1261
1262         fw_ptr = (unsigned short *)fw_entry->data;
1263         count2 = fw_entry->size / 2;
1264
1265         /* Hardware adapter reset */
1266         SIFWRITEW(ACL_ARESET, SIFACL);
1267         tms380tr_wait(40);
1268
1269         c = SIFREADW(SIFACL);
1270         tms380tr_wait(20);
1271
1272         if(dev->dma == 0)       /* For PCI adapters */
1273         {
1274                 c &= ~(ACL_NSELOUT0 | ACL_NSELOUT1);    /* Clear bits */
1275                 if(tp->setnselout)
1276                   c |= (*tp->setnselout)(dev);
1277         }
1278
1279         /* In case a command is pending - forget it */
1280         tp->ScbInUse = 0;
1281
1282         c &= ~ACL_ARESET;               /* Clear adapter reset bit */
1283         c |=  ACL_CPHALT;               /* Halt adapter CPU, allow download */
1284         c |= ACL_BOOT;
1285         c |= ACL_SINTEN;
1286         c &= ~ACL_PSDMAEN;              /* Clear pseudo dma bit */
1287         SIFWRITEW(c, SIFACL);
1288         tms380tr_wait(40);
1289
1290         count = 0;
1291         /* Download firmware via DIO interface: */
1292         do {
1293                 if (count2 < 3) continue;
1294
1295                 /* Download first address part */
1296                 SIFWRITEW(*fw_ptr, SIFADX);
1297                 fw_ptr++;
1298                 count2--;
1299                 /* Download second address part */
1300                 SIFWRITEW(*fw_ptr, SIFADD);
1301                 fw_ptr++;
1302                 count2--;
1303
1304                 if((count = *fw_ptr) != 0)      /* Load loop counter */
1305                 {
1306                         fw_ptr++;       /* Download block data */
1307                         count2--;
1308                         if (count > count2) continue;
1309
1310                         for(; count > 0; count--)
1311                         {
1312                                 SIFWRITEW(*fw_ptr, SIFINC);
1313                                 fw_ptr++;
1314                                 count2--;
1315                         }
1316                 }
1317                 else    /* Stop, if last block downloaded */
1318                 {
1319                         c = SIFREADW(SIFACL);
1320                         c &= (~ACL_CPHALT | ACL_SINTEN);
1321
1322                         /* Clear CPHALT and start BUD */
1323                         SIFWRITEW(c, SIFACL);
1324                         release_firmware(fw_entry);
1325                         return 1;
1326                 }
1327         } while(count == 0);
1328
1329         release_firmware(fw_entry);
1330         printk(KERN_INFO "%s: Adapter Download Failed\n", dev->name);
1331         return -1;
1332 }
1333
1334 MODULE_FIRMWARE("tms380tr.bin");
1335
1336 /*
1337  * Starts bring up diagnostics of token ring adapter and evaluates
1338  * diagnostic results.
1339  */
1340 static int tms380tr_bringup_diags(struct net_device *dev)
1341 {
1342         int loop_cnt, retry_cnt;
1343         unsigned short Status;
1344
1345         tms380tr_wait(HALF_SECOND);
1346         tms380tr_exec_sifcmd(dev, EXEC_SOFT_RESET);
1347         tms380tr_wait(HALF_SECOND);
1348
1349         retry_cnt = BUD_MAX_RETRIES;    /* maximal number of retrys */
1350
1351         do {
1352                 retry_cnt--;
1353                 if(tms380tr_debug > 3)
1354                         printk(KERN_DEBUG "BUD-Status: ");
1355                 loop_cnt = BUD_MAX_LOOPCNT;     /* maximum: three seconds*/
1356                 do {                    /* Inspect BUD results */
1357                         loop_cnt--;
1358                         tms380tr_wait(HALF_SECOND);
1359                         Status = SIFREADW(SIFSTS);
1360                         Status &= STS_MASK;
1361
1362                         if(tms380tr_debug > 3)
1363                                 printk(KERN_DEBUG " %04X\n", Status);
1364                         /* BUD successfully completed */
1365                         if(Status == STS_INITIALIZE)
1366                                 return 1;
1367                 /* Unrecoverable hardware error, BUD not completed? */
1368                 } while((loop_cnt > 0) && ((Status & (STS_ERROR | STS_TEST))
1369                         != (STS_ERROR | STS_TEST)));
1370
1371                 /* Error preventing completion of BUD */
1372                 if(retry_cnt > 0)
1373                 {
1374                         printk(KERN_INFO "%s: Adapter Software Reset.\n",
1375                                 dev->name);
1376                         tms380tr_exec_sifcmd(dev, EXEC_SOFT_RESET);
1377                         tms380tr_wait(HALF_SECOND);
1378                 }
1379         } while(retry_cnt > 0);
1380
1381         Status = SIFREADW(SIFSTS);
1382
1383         printk(KERN_INFO "%s: Hardware error\n", dev->name);
1384         /* Hardware error occurred! */
1385         Status &= 0x001f;
1386         if (Status & 0x0010)
1387                 printk(KERN_INFO "%s: BUD Error: Timeout\n", dev->name);
1388         else if ((Status & 0x000f) > 6)
1389                 printk(KERN_INFO "%s: BUD Error: Illegal Failure\n", dev->name);
1390         else
1391                 printk(KERN_INFO "%s: Bring Up Diagnostics Error (%04X) occurred\n", dev->name, Status & 0x000f);
1392
1393         return -1;
1394 }
1395
1396 /*
1397  * Copy initialisation data to adapter memory, beginning at address
1398  * 1:0A00; Starting DMA test and evaluating result bits.
1399  */
1400 static int tms380tr_init_adapter(struct net_device *dev)
1401 {
1402         struct net_local *tp = netdev_priv(dev);
1403
1404         const unsigned char SCB_Test[6] = {0x00, 0x00, 0xC1, 0xE2, 0xD4, 0x8B};
1405         const unsigned char SSB_Test[8] = {0xFF, 0xFF, 0xD1, 0xD7,
1406                                                 0xC5, 0xD9, 0xC3, 0xD4};
1407         void *ptr = (void *)&tp->ipb;
1408         unsigned short *ipb_ptr = (unsigned short *)ptr;
1409         unsigned char *cb_ptr = (unsigned char *) &tp->scb;
1410         unsigned char *sb_ptr = (unsigned char *) &tp->ssb;
1411         unsigned short Status;
1412         int i, loop_cnt, retry_cnt;
1413
1414         /* Normalize: byte order low/high, word order high/low! (only IPB!) */
1415         tp->ipb.SCB_Addr = SWAPW(((char *)&tp->scb - (char *)tp) + tp->dmabuffer);
1416         tp->ipb.SSB_Addr = SWAPW(((char *)&tp->ssb - (char *)tp) + tp->dmabuffer);
1417
1418         if(tms380tr_debug > 3)
1419         {
1420                 printk(KERN_DEBUG "%s: buffer (real): %lx\n", dev->name, (long) &tp->scb);
1421                 printk(KERN_DEBUG "%s: buffer (virt): %lx\n", dev->name, (long) ((char *)&tp->scb - (char *)tp) + (long) tp->dmabuffer);
1422                 printk(KERN_DEBUG "%s: buffer (DMA) : %lx\n", dev->name, (long) tp->dmabuffer);
1423                 printk(KERN_DEBUG "%s: buffer (tp)  : %lx\n", dev->name, (long) tp);
1424         }
1425         /* Maximum: three initialization retries */
1426         retry_cnt = INIT_MAX_RETRIES;
1427
1428         do {
1429                 retry_cnt--;
1430
1431                 /* Transfer initialization block */
1432                 SIFWRITEW(0x0001, SIFADX);
1433
1434                 /* To address 0001:0A00 of adapter RAM */
1435                 SIFWRITEW(0x0A00, SIFADD);
1436
1437                 /* Write 11 words to adapter RAM */
1438                 for(i = 0; i < 11; i++)
1439                         SIFWRITEW(ipb_ptr[i], SIFINC);
1440
1441                 /* Execute SCB adapter command */
1442                 tms380tr_exec_sifcmd(dev, CMD_EXECUTE);
1443
1444                 loop_cnt = INIT_MAX_LOOPCNT;    /* Maximum: 11 seconds */
1445
1446                 /* While remaining retries, no error and not completed */
1447                 do {
1448                         Status = 0;
1449                         loop_cnt--;
1450                         tms380tr_wait(HALF_SECOND);
1451
1452                         /* Mask interesting status bits */
1453                         Status = SIFREADW(SIFSTS);
1454                         Status &= STS_MASK;
1455                 } while(((Status &(STS_INITIALIZE | STS_ERROR | STS_TEST)) != 0) &&
1456                         ((Status & STS_ERROR) == 0) && (loop_cnt != 0));
1457
1458                 if((Status & (STS_INITIALIZE | STS_ERROR | STS_TEST)) == 0)
1459                 {
1460                         /* Initialization completed without error */
1461                         i = 0;
1462                         do {    /* Test if contents of SCB is valid */
1463                                 if(SCB_Test[i] != *(cb_ptr + i))
1464                                 {
1465                                         printk(KERN_INFO "%s: DMA failed\n", dev->name);
1466                                         /* DMA data error: wrong data in SCB */
1467                                         return -1;
1468                                 }
1469                                 i++;
1470                         } while(i < 6);
1471
1472                         i = 0;
1473                         do {    /* Test if contents of SSB is valid */
1474                                 if(SSB_Test[i] != *(sb_ptr + i))
1475                                         /* DMA data error: wrong data in SSB */
1476                                         return -1;
1477                                 i++;
1478                         } while (i < 8);
1479
1480                         return 1;       /* Adapter successfully initialized */
1481                 }
1482                 else
1483                 {
1484                         if((Status & STS_ERROR) != 0)
1485                         {
1486                                 /* Initialization error occurred */
1487                                 Status = SIFREADW(SIFSTS);
1488                                 Status &= STS_ERROR_MASK;
1489                                 /* ShowInitialisationErrorCode(Status); */
1490                                 printk(KERN_INFO "%s: Status error: %d\n", dev->name, Status);
1491                                 return -1; /* Unrecoverable error */
1492                         }
1493                         else
1494                         {
1495                                 if(retry_cnt > 0)
1496                                 {
1497                                         /* Reset adapter and try init again */
1498                                         tms380tr_exec_sifcmd(dev, EXEC_SOFT_RESET);
1499                                         tms380tr_wait(HALF_SECOND);
1500                                 }
1501                         }
1502                 }
1503         } while(retry_cnt > 0);
1504
1505         printk(KERN_INFO "%s: Retry exceeded\n", dev->name);
1506         return -1;
1507 }
1508
1509 /*
1510  * Check for outstanding commands in command queue and tries to execute
1511  * command immediately. Corresponding command flag in command queue is cleared.
1512  */
1513 static void tms380tr_chk_outstanding_cmds(struct net_device *dev)
1514 {
1515         struct net_local *tp = netdev_priv(dev);
1516         unsigned long Addr = 0;
1517
1518         if(tp->CMDqueue == 0)
1519                 return;         /* No command execution */
1520
1521         /* If SCB in use: no command */
1522         if(tp->ScbInUse == 1)
1523                 return;
1524
1525         /* Check if adapter is opened, avoiding COMMAND_REJECT
1526          * interrupt by the adapter!
1527          */
1528         if(tp->AdapterOpenFlag == 0)
1529         {
1530                 if(tp->CMDqueue & OC_OPEN)
1531                 {
1532                         /* Execute OPEN command */
1533                         tp->CMDqueue ^= OC_OPEN;
1534
1535                         Addr = htonl(((char *)&tp->ocpl - (char *)tp) + tp->dmabuffer);
1536                         tp->scb.Parm[0] = LOWORD(Addr);
1537                         tp->scb.Parm[1] = HIWORD(Addr);
1538                         tp->scb.CMD = OPEN;
1539                 }
1540                 else
1541                         /* No OPEN command queued, but adapter closed. Note:
1542                          * We'll try to re-open the adapter in DriverPoll()
1543                          */
1544                         return;         /* No adapter command issued */
1545         }
1546         else
1547         {
1548                 /* Adapter is open; evaluate command queue: try to execute
1549                  * outstanding commands (depending on priority!) CLOSE
1550                  * command queued
1551                  */
1552                 if(tp->CMDqueue & OC_CLOSE)
1553                 {
1554                         tp->CMDqueue ^= OC_CLOSE;
1555                         tp->AdapterOpenFlag = 0;
1556                         tp->scb.Parm[0] = 0; /* Parm[0], Parm[1] are ignored */
1557                         tp->scb.Parm[1] = 0; /* but should be set to zero! */
1558                         tp->scb.CMD = CLOSE;
1559                         if(!tp->HaltInProgress)
1560                                 tp->CMDqueue |= OC_OPEN; /* re-open adapter */
1561                         else
1562                                 tp->CMDqueue = 0;       /* no more commands */
1563                 }
1564                 else
1565                 {
1566                         if(tp->CMDqueue & OC_RECEIVE)
1567                         {
1568                                 tp->CMDqueue ^= OC_RECEIVE;
1569                                 Addr = htonl(((char *)tp->RplHead - (char *)tp) + tp->dmabuffer);
1570                                 tp->scb.Parm[0] = LOWORD(Addr);
1571                                 tp->scb.Parm[1] = HIWORD(Addr);
1572                                 tp->scb.CMD = RECEIVE;
1573                         }
1574                         else
1575                         {
1576                                 if(tp->CMDqueue & OC_TRANSMIT_HALT)
1577                                 {
1578                                         /* NOTE: TRANSMIT.HALT must be checked
1579                                          * before TRANSMIT.
1580                                          */
1581                                         tp->CMDqueue ^= OC_TRANSMIT_HALT;
1582                                         tp->scb.CMD = TRANSMIT_HALT;
1583
1584                                         /* Parm[0] and Parm[1] are ignored
1585                                          * but should be set to zero!
1586                                          */
1587                                         tp->scb.Parm[0] = 0;
1588                                         tp->scb.Parm[1] = 0;
1589                                 }
1590                                 else
1591                                 {
1592                                         if(tp->CMDqueue & OC_TRANSMIT)
1593                                         {
1594                                                 /* NOTE: TRANSMIT must be
1595                                                  * checked after TRANSMIT.HALT
1596                                                  */
1597                                                 if(tp->TransmitCommandActive)
1598                                                 {
1599                                                         if(!tp->TransmitHaltScheduled)
1600                                                         {
1601                                                                 tp->TransmitHaltScheduled = 1;
1602                                                                 tms380tr_exec_cmd(dev, OC_TRANSMIT_HALT) ;
1603                                                         }
1604                                                         tp->TransmitCommandActive = 0;
1605                                                         return;
1606                                                 }
1607
1608                                                 tp->CMDqueue ^= OC_TRANSMIT;
1609                                                 tms380tr_cancel_tx_queue(tp);
1610                                                 Addr = htonl(((char *)tp->TplBusy - (char *)tp) + tp->dmabuffer);
1611                                                 tp->scb.Parm[0] = LOWORD(Addr);
1612                                                 tp->scb.Parm[1] = HIWORD(Addr);
1613                                                 tp->scb.CMD = TRANSMIT;
1614                                                 tp->TransmitCommandActive = 1;
1615                                         }
1616                                         else
1617                                         {
1618                                                 if(tp->CMDqueue & OC_MODIFY_OPEN_PARMS)
1619                                                 {
1620                                                         tp->CMDqueue ^= OC_MODIFY_OPEN_PARMS;
1621                                                         tp->scb.Parm[0] = tp->ocpl.OPENOptions; /* new OPEN options*/
1622                                                         tp->scb.Parm[0] |= ENABLE_FULL_DUPLEX_SELECTION;
1623                                                         tp->scb.Parm[1] = 0; /* is ignored but should be zero */
1624                                                         tp->scb.CMD = MODIFY_OPEN_PARMS;
1625                                                 }
1626                                                 else
1627                                                 {
1628                                                         if(tp->CMDqueue & OC_SET_FUNCT_ADDR)
1629                                                         {
1630                                                                 tp->CMDqueue ^= OC_SET_FUNCT_ADDR;
1631                                                                 tp->scb.Parm[0] = LOWORD(tp->ocpl.FunctAddr);
1632                                                                 tp->scb.Parm[1] = HIWORD(tp->ocpl.FunctAddr);
1633                                                                 tp->scb.CMD = SET_FUNCT_ADDR;
1634                                                         }
1635                                                         else
1636                                                         {
1637                                                                 if(tp->CMDqueue & OC_SET_GROUP_ADDR)
1638                                                                 {
1639                                                                         tp->CMDqueue ^= OC_SET_GROUP_ADDR;
1640                                                                         tp->scb.Parm[0] = LOWORD(tp->ocpl.GroupAddr);
1641                                                                         tp->scb.Parm[1] = HIWORD(tp->ocpl.GroupAddr);
1642                                                                         tp->scb.CMD = SET_GROUP_ADDR;
1643                                                                 }
1644                                                                 else
1645                                                                 {
1646                                                                         if(tp->CMDqueue & OC_READ_ERROR_LOG)
1647                                                                         {
1648                                                                                 tp->CMDqueue ^= OC_READ_ERROR_LOG;
1649                                                                                 Addr = htonl(((char *)&tp->errorlogtable - (char *)tp) + tp->dmabuffer);
1650                                                                                 tp->scb.Parm[0] = LOWORD(Addr);
1651                                                                                 tp->scb.Parm[1] = HIWORD(Addr);
1652                                                                                 tp->scb.CMD = READ_ERROR_LOG;
1653                                                                         }
1654                                                                         else
1655                                                                         {
1656                                                                                 printk(KERN_WARNING "CheckForOutstandingCommand: unknown Command\n");
1657                                                                                 tp->CMDqueue = 0;
1658                                                                                 return;
1659                                                                         }
1660                                                                 }
1661                                                         }
1662                                                 }
1663                                         }
1664                                 }
1665                         }
1666                 }
1667         }
1668
1669         tp->ScbInUse = 1;       /* Set semaphore: SCB in use. */
1670
1671         /* Execute SCB and generate IRQ when done. */
1672         tms380tr_exec_sifcmd(dev, CMD_EXECUTE | CMD_SCB_REQUEST);
1673 }
1674
1675 /*
1676  * IRQ conditions: signal loss on the ring, transmit or receive of beacon
1677  * frames (disabled if bit 1 of OPEN option is set); report error MAC
1678  * frame transmit (disabled if bit 2 of OPEN option is set); open or short
1679  * circuit fault on the lobe is detected; remove MAC frame received;
1680  * error counter overflow (255); opened adapter is the only station in ring.
1681  * After some of the IRQs the adapter is closed!
1682  */
1683 static void tms380tr_ring_status_irq(struct net_device *dev)
1684 {
1685         struct net_local *tp = netdev_priv(dev);
1686
1687         tp->CurrentRingStatus = be16_to_cpu((unsigned short)tp->ssb.Parm[0]);
1688
1689         /* First: fill up statistics */
1690         if(tp->ssb.Parm[0] & SIGNAL_LOSS)
1691         {
1692                 printk(KERN_INFO "%s: Signal Loss\n", dev->name);
1693                 tp->MacStat.line_errors++;
1694         }
1695
1696         /* Adapter is closed, but initialized */
1697         if(tp->ssb.Parm[0] & LOBE_WIRE_FAULT)
1698         {
1699                 printk(KERN_INFO "%s: Lobe Wire Fault, Reopen Adapter\n",
1700                         dev->name);
1701                 tp->MacStat.line_errors++;
1702         }
1703
1704         if(tp->ssb.Parm[0] & RING_RECOVERY)
1705                 printk(KERN_INFO "%s: Ring Recovery\n", dev->name);
1706
1707         /* Counter overflow: read error log */
1708         if(tp->ssb.Parm[0] & COUNTER_OVERFLOW)
1709         {
1710                 printk(KERN_INFO "%s: Counter Overflow\n", dev->name);
1711                 tms380tr_exec_cmd(dev, OC_READ_ERROR_LOG);
1712         }
1713
1714         /* Adapter is closed, but initialized */
1715         if(tp->ssb.Parm[0] & REMOVE_RECEIVED)
1716                 printk(KERN_INFO "%s: Remove Received, Reopen Adapter\n",
1717                         dev->name);
1718
1719         /* Adapter is closed, but initialized */
1720         if(tp->ssb.Parm[0] & AUTO_REMOVAL_ERROR)
1721                 printk(KERN_INFO "%s: Auto Removal Error, Reopen Adapter\n",
1722                         dev->name);
1723
1724         if(tp->ssb.Parm[0] & HARD_ERROR)
1725                 printk(KERN_INFO "%s: Hard Error\n", dev->name);
1726
1727         if(tp->ssb.Parm[0] & SOFT_ERROR)
1728                 printk(KERN_INFO "%s: Soft Error\n", dev->name);
1729
1730         if(tp->ssb.Parm[0] & TRANSMIT_BEACON)
1731                 printk(KERN_INFO "%s: Transmit Beacon\n", dev->name);
1732
1733         if(tp->ssb.Parm[0] & SINGLE_STATION)
1734                 printk(KERN_INFO "%s: Single Station\n", dev->name);
1735
1736         /* Check if adapter has been closed */
1737         if(tp->ssb.Parm[0] & ADAPTER_CLOSED)
1738         {
1739                 printk(KERN_INFO "%s: Adapter closed (Reopening),"
1740                         "CurrentRingStat %x\n",
1741                         dev->name, tp->CurrentRingStatus);
1742                 tp->AdapterOpenFlag = 0;
1743                 tms380tr_open_adapter(dev);
1744         }
1745 }
1746
1747 /*
1748  * Issued if adapter has encountered an unrecoverable hardware
1749  * or software error.
1750  */
1751 static void tms380tr_chk_irq(struct net_device *dev)
1752 {
1753         int i;
1754         unsigned short AdapterCheckBlock[4];
1755         struct net_local *tp = netdev_priv(dev);
1756
1757         tp->AdapterOpenFlag = 0;        /* Adapter closed now */
1758
1759         /* Page number of adapter memory */
1760         SIFWRITEW(0x0001, SIFADX);
1761         /* Address offset */
1762         SIFWRITEW(CHECKADDR, SIFADR);
1763
1764         /* Reading 8 byte adapter check block. */
1765         for(i = 0; i < 4; i++)
1766                 AdapterCheckBlock[i] = SIFREADW(SIFINC);
1767
1768         if(tms380tr_debug > 3)
1769         {
1770                 printk(KERN_DEBUG "%s: AdapterCheckBlock: ", dev->name);
1771                 for (i = 0; i < 4; i++)
1772                         printk("%04X", AdapterCheckBlock[i]);
1773                 printk("\n");
1774         }
1775
1776         switch(AdapterCheckBlock[0])
1777         {
1778                 case DIO_PARITY:
1779                         printk(KERN_INFO "%s: DIO parity error\n", dev->name);
1780                         break;
1781
1782                 case DMA_READ_ABORT:
1783                         printk(KERN_INFO "%s DMA read operation aborted:\n",
1784                                 dev->name);
1785                         switch (AdapterCheckBlock[1])
1786                         {
1787                                 case 0:
1788                                         printk(KERN_INFO "Timeout\n");
1789                                         printk(KERN_INFO "Address: %04X %04X\n",
1790                                                 AdapterCheckBlock[2],
1791                                                 AdapterCheckBlock[3]);
1792                                         break;
1793
1794                                 case 1:
1795                                         printk(KERN_INFO "Parity error\n");
1796                                         printk(KERN_INFO "Address: %04X %04X\n",
1797                                                 AdapterCheckBlock[2],
1798                                                 AdapterCheckBlock[3]);
1799                                         break;
1800
1801                                 case 2:
1802                                         printk(KERN_INFO "Bus error\n");
1803                                         printk(KERN_INFO "Address: %04X %04X\n",
1804                                                 AdapterCheckBlock[2],
1805                                                 AdapterCheckBlock[3]);
1806                                         break;
1807
1808                                 default:
1809                                         printk(KERN_INFO "Unknown error.\n");
1810                                         break;
1811                         }
1812                         break;
1813
1814                 case DMA_WRITE_ABORT:
1815                         printk(KERN_INFO "%s: DMA write operation aborted:\n",
1816                                 dev->name);
1817                         switch (AdapterCheckBlock[1])
1818                         {
1819                                 case 0:
1820                                         printk(KERN_INFO "Timeout\n");
1821                                         printk(KERN_INFO "Address: %04X %04X\n",
1822                                                 AdapterCheckBlock[2],
1823                                                 AdapterCheckBlock[3]);
1824                                         break;
1825
1826                                 case 1:
1827                                         printk(KERN_INFO "Parity error\n");
1828                                         printk(KERN_INFO "Address: %04X %04X\n",
1829                                                 AdapterCheckBlock[2],
1830                                                 AdapterCheckBlock[3]);
1831                                         break;
1832
1833                                 case 2:
1834                                         printk(KERN_INFO "Bus error\n");
1835                                         printk(KERN_INFO "Address: %04X %04X\n",
1836                                                 AdapterCheckBlock[2],
1837                                                 AdapterCheckBlock[3]);
1838                                         break;
1839
1840                                 default:
1841                                         printk(KERN_INFO "Unknown error.\n");
1842                                         break;
1843                         }
1844                         break;
1845
1846                 case ILLEGAL_OP_CODE:
1847                         printk(KERN_INFO "%s: Illegal operation code in firmware\n",
1848                                 dev->name);
1849                         /* Parm[0-3]: adapter internal register R13-R15 */
1850                         break;
1851
1852                 case PARITY_ERRORS:
1853                         printk(KERN_INFO "%s: Adapter internal bus parity error\n",
1854                                 dev->name);
1855                         /* Parm[0-3]: adapter internal register R13-R15 */
1856                         break;
1857
1858                 case RAM_DATA_ERROR:
1859                         printk(KERN_INFO "%s: RAM data error\n", dev->name);
1860                         /* Parm[0-1]: MSW/LSW address of RAM location. */
1861                         break;
1862
1863                 case RAM_PARITY_ERROR:
1864                         printk(KERN_INFO "%s: RAM parity error\n", dev->name);
1865                         /* Parm[0-1]: MSW/LSW address of RAM location. */
1866                         break;
1867
1868                 case RING_UNDERRUN:
1869                         printk(KERN_INFO "%s: Internal DMA underrun detected\n",
1870                                 dev->name);
1871                         break;
1872
1873                 case INVALID_IRQ:
1874                         printk(KERN_INFO "%s: Unrecognized interrupt detected\n",
1875                                 dev->name);
1876                         /* Parm[0-3]: adapter internal register R13-R15 */
1877                         break;
1878
1879                 case INVALID_ERROR_IRQ:
1880                         printk(KERN_INFO "%s: Unrecognized error interrupt detected\n",
1881                                 dev->name);
1882                         /* Parm[0-3]: adapter internal register R13-R15 */
1883                         break;
1884
1885                 case INVALID_XOP:
1886                         printk(KERN_INFO "%s: Unrecognized XOP request detected\n",
1887                                 dev->name);
1888                         /* Parm[0-3]: adapter internal register R13-R15 */
1889                         break;
1890
1891                 default:
1892                         printk(KERN_INFO "%s: Unknown status", dev->name);
1893                         break;
1894         }
1895
1896         if(tms380tr_chipset_init(dev) == 1)
1897         {
1898                 /* Restart of firmware successful */
1899                 tp->AdapterOpenFlag = 1;
1900         }
1901 }
1902
1903 /*
1904  * Internal adapter pointer to RAM data are copied from adapter into
1905  * host system.
1906  */
1907 static int tms380tr_read_ptr(struct net_device *dev)
1908 {
1909         struct net_local *tp = netdev_priv(dev);
1910         unsigned short adapterram;
1911
1912         tms380tr_read_ram(dev, (unsigned char *)&tp->intptrs.BurnedInAddrPtr,
1913                         ADAPTER_INT_PTRS, 16);
1914         tms380tr_read_ram(dev, (unsigned char *)&adapterram,
1915                         cpu_to_be16((unsigned short)tp->intptrs.AdapterRAMPtr), 2);
1916         return be16_to_cpu(adapterram);
1917 }
1918
1919 /*
1920  * Reads a number of bytes from adapter to system memory.
1921  */
1922 static void tms380tr_read_ram(struct net_device *dev, unsigned char *Data,
1923                                 unsigned short Address, int Length)
1924 {
1925         int i;
1926         unsigned short old_sifadx, old_sifadr, InWord;
1927
1928         /* Save the current values */
1929         old_sifadx = SIFREADW(SIFADX);
1930         old_sifadr = SIFREADW(SIFADR);
1931
1932         /* Page number of adapter memory */
1933         SIFWRITEW(0x0001, SIFADX);
1934         /* Address offset in adapter RAM */
1935         SIFWRITEW(Address, SIFADR);
1936
1937         /* Copy len byte from adapter memory to system data area. */
1938         i = 0;
1939         for(;;)
1940         {
1941                 InWord = SIFREADW(SIFINC);
1942
1943                 *(Data + i) = HIBYTE(InWord);   /* Write first byte */
1944                 if(++i == Length)               /* All is done break */
1945                         break;
1946
1947                 *(Data + i) = LOBYTE(InWord);   /* Write second byte */
1948                 if (++i == Length)              /* All is done break */
1949                         break;
1950         }
1951
1952         /* Restore original values */
1953         SIFWRITEW(old_sifadx, SIFADX);
1954         SIFWRITEW(old_sifadr, SIFADR);
1955 }
1956
1957 /*
1958  * Cancel all queued packets in the transmission queue.
1959  */
1960 static void tms380tr_cancel_tx_queue(struct net_local* tp)
1961 {
1962         TPL *tpl;
1963
1964         /*
1965          * NOTE: There must not be an active TRANSMIT command pending, when
1966          * this function is called.
1967          */
1968         if(tp->TransmitCommandActive)
1969                 return;
1970
1971         for(;;)
1972         {
1973                 tpl = tp->TplBusy;
1974                 if(!tpl->BusyFlag)
1975                         break;
1976                 /* "Remove" TPL from busy list. */
1977                 tp->TplBusy = tpl->NextTPLPtr;
1978                 tms380tr_write_tpl_status(tpl, 0);      /* Clear VALID bit */
1979                 tpl->BusyFlag = 0;              /* "free" TPL */
1980
1981                 printk(KERN_INFO "Cancel tx (%08lXh).\n", (unsigned long)tpl);
1982                 if (tpl->DMABuff)
1983                         dma_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, DMA_TO_DEVICE);
1984                 dev_kfree_skb_any(tpl->Skb);
1985         }
1986 }
1987
1988 /*
1989  * This function is called whenever a transmit interrupt is generated by the
1990  * adapter. For a command complete interrupt, it is checked if we have to
1991  * issue a new transmit command or not.
1992  */
1993 static void tms380tr_tx_status_irq(struct net_device *dev)
1994 {
1995         struct net_local *tp = netdev_priv(dev);
1996         unsigned char HighByte, HighAc, LowAc;
1997         TPL *tpl;
1998
1999         /* NOTE: At this point the SSB from TRANSMIT STATUS is no longer
2000          * available, because the CLEAR SSB command has already been issued.
2001          *
2002          * Process all complete transmissions.
2003          */
2004
2005         for(;;)
2006         {
2007                 tpl = tp->TplBusy;
2008                 if(!tpl->BusyFlag || (tpl->Status
2009                         & (TX_VALID | TX_FRAME_COMPLETE))
2010                         != TX_FRAME_COMPLETE)
2011                 {
2012                         break;
2013                 }
2014
2015                 /* "Remove" TPL from busy list. */
2016                 tp->TplBusy = tpl->NextTPLPtr ;
2017
2018                 /* Check the transmit status field only for directed frames*/
2019                 if(DIRECTED_FRAME(tpl) && (tpl->Status & TX_ERROR) == 0)
2020                 {
2021                         HighByte = GET_TRANSMIT_STATUS_HIGH_BYTE(tpl->Status);
2022                         HighAc   = GET_FRAME_STATUS_HIGH_AC(HighByte);
2023                         LowAc    = GET_FRAME_STATUS_LOW_AC(HighByte);
2024
2025                         if((HighAc != LowAc) || (HighAc == AC_NOT_RECOGNIZED))
2026                         {
2027                                 printk(KERN_DEBUG "%s: (DA=%08lX not recognized)\n",
2028                                         dev->name,
2029                                         *(unsigned long *)&tpl->MData[2+2]);
2030                         }
2031                         else
2032                         {
2033                                 if(tms380tr_debug > 3)
2034                                         printk(KERN_DEBUG "%s: Directed frame tx'd\n",
2035                                                 dev->name);
2036                         }
2037                 }
2038                 else
2039                 {
2040                         if(!DIRECTED_FRAME(tpl))
2041                         {
2042                                 if(tms380tr_debug > 3)
2043                                         printk(KERN_DEBUG "%s: Broadcast frame tx'd\n",
2044                                                 dev->name);
2045                         }
2046                 }
2047
2048                 tp->MacStat.tx_packets++;
2049                 if (tpl->DMABuff)
2050                         dma_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, DMA_TO_DEVICE);
2051                 dev_kfree_skb_irq(tpl->Skb);
2052                 tpl->BusyFlag = 0;      /* "free" TPL */
2053         }
2054
2055         if(!tp->TplFree->NextTPLPtr->BusyFlag)
2056                 netif_wake_queue(dev);
2057 }
2058
2059 /*
2060  * Called if a frame receive interrupt is generated by the adapter.
2061  * Check if the frame is valid and indicate it to system.
2062  */
2063 static void tms380tr_rcv_status_irq(struct net_device *dev)
2064 {
2065         struct net_local *tp = netdev_priv(dev);
2066         unsigned char *ReceiveDataPtr;
2067         struct sk_buff *skb;
2068         unsigned int Length, Length2;
2069         RPL *rpl;
2070         RPL *SaveHead;
2071         dma_addr_t dmabuf;
2072
2073         /* NOTE: At this point the SSB from RECEIVE STATUS is no longer
2074          * available, because the CLEAR SSB command has already been issued.
2075          *
2076          * Process all complete receives.
2077          */
2078
2079         for(;;)
2080         {
2081                 rpl = tp->RplHead;
2082                 if(rpl->Status & RX_VALID)
2083                         break;          /* RPL still in use by adapter */
2084
2085                 /* Forward RPLHead pointer to next list. */
2086                 SaveHead = tp->RplHead;
2087                 tp->RplHead = rpl->NextRPLPtr;
2088
2089                 /* Get the frame size (Byte swap for Intel).
2090                  * Do this early (see workaround comment below)
2091                  */
2092                 Length = be16_to_cpu(rpl->FrameSize);
2093
2094                 /* Check if the Frame_Start, Frame_End and
2095                  * Frame_Complete bits are set.
2096                  */
2097                 if((rpl->Status & VALID_SINGLE_BUFFER_FRAME)
2098                         == VALID_SINGLE_BUFFER_FRAME)
2099                 {
2100                         ReceiveDataPtr = rpl->MData;
2101
2102                         /* Workaround for delayed write of FrameSize on ISA
2103                          * (FrameSize is false but valid-bit is reset)
2104                          * Frame size is set to zero when the RPL is freed.
2105                          * Length2 is there because there have also been
2106                          * cases where the FrameSize was partially written
2107                          */
2108                         Length2 = be16_to_cpu(rpl->FrameSize);
2109
2110                         if(Length == 0 || Length != Length2)
2111                         {
2112                                 tp->RplHead = SaveHead;
2113                                 break;  /* Return to tms380tr_interrupt */
2114                         }
2115                         tms380tr_update_rcv_stats(tp,ReceiveDataPtr,Length);
2116
2117                         if(tms380tr_debug > 3)
2118                                 printk(KERN_DEBUG "%s: Packet Length %04X (%d)\n",
2119                                         dev->name, Length, Length);
2120
2121                         /* Indicate the received frame to system the
2122                          * adapter does the Source-Routing padding for
2123                          * us. See: OpenOptions in tms380tr_init_opb()
2124                          */
2125                         skb = rpl->Skb;
2126                         if(rpl->SkbStat == SKB_UNAVAILABLE)
2127                         {
2128                                 /* Try again to allocate skb */
2129                                 skb = dev_alloc_skb(tp->MaxPacketSize);
2130                                 if(skb == NULL)
2131                                 {
2132                                         /* Update Stats ?? */
2133                                 }
2134                                 else
2135                                 {
2136                                         skb_put(skb, tp->MaxPacketSize);
2137                                         rpl->SkbStat    = SKB_DATA_COPY;
2138                                         ReceiveDataPtr  = rpl->MData;
2139                                 }
2140                         }
2141
2142                         if(skb && (rpl->SkbStat == SKB_DATA_COPY ||
2143                                    rpl->SkbStat == SKB_DMA_DIRECT))
2144                         {
2145                                 if(rpl->SkbStat == SKB_DATA_COPY)
2146                                         skb_copy_to_linear_data(skb, ReceiveDataPtr,
2147                                                        Length);
2148
2149                                 /* Deliver frame to system */
2150                                 rpl->Skb = NULL;
2151                                 skb_trim(skb,Length);
2152                                 skb->protocol = tr_type_trans(skb,dev);
2153                                 netif_rx(skb);
2154                         }
2155                 }
2156                 else    /* Invalid frame */
2157                 {
2158                         if(rpl->Skb != NULL)
2159                                 dev_kfree_skb_irq(rpl->Skb);
2160
2161                         /* Skip list. */
2162                         if(rpl->Status & RX_START_FRAME)
2163                                 /* Frame start bit is set -> overflow. */
2164                                 tp->MacStat.rx_errors++;
2165                 }
2166                 if (rpl->DMABuff)
2167                         dma_unmap_single(tp->pdev, rpl->DMABuff, tp->MaxPacketSize, DMA_TO_DEVICE);
2168                 rpl->DMABuff = 0;
2169
2170                 /* Allocate new skb for rpl */
2171                 rpl->Skb = dev_alloc_skb(tp->MaxPacketSize);
2172                 /* skb == NULL ? then use local buffer */
2173                 if(rpl->Skb == NULL)
2174                 {
2175                         rpl->SkbStat = SKB_UNAVAILABLE;
2176                         rpl->FragList[0].DataAddr = htonl(((char *)tp->LocalRxBuffers[rpl->RPLIndex] - (char *)tp) + tp->dmabuffer);
2177                         rpl->MData = tp->LocalRxBuffers[rpl->RPLIndex];
2178                 }
2179                 else    /* skb != NULL */
2180                 {
2181                         rpl->Skb->dev = dev;
2182                         skb_put(rpl->Skb, tp->MaxPacketSize);
2183
2184                         /* Data unreachable for DMA ? then use local buffer */
2185                         dmabuf = dma_map_single(tp->pdev, rpl->Skb->data, tp->MaxPacketSize, DMA_FROM_DEVICE);
2186                         if(tp->dmalimit && (dmabuf + tp->MaxPacketSize > tp->dmalimit))
2187                         {
2188                                 rpl->SkbStat = SKB_DATA_COPY;
2189                                 rpl->FragList[0].DataAddr = htonl(((char *)tp->LocalRxBuffers[rpl->RPLIndex] - (char *)tp) + tp->dmabuffer);
2190                                 rpl->MData = tp->LocalRxBuffers[rpl->RPLIndex];
2191                         }
2192                         else
2193                         {
2194                                 /* DMA directly in skb->data */
2195                                 rpl->SkbStat = SKB_DMA_DIRECT;
2196                                 rpl->FragList[0].DataAddr = htonl(dmabuf);
2197                                 rpl->MData = rpl->Skb->data;
2198                                 rpl->DMABuff = dmabuf;
2199                         }
2200                 }
2201
2202                 rpl->FragList[0].DataCount = cpu_to_be16((unsigned short)tp->MaxPacketSize);
2203                 rpl->FrameSize = 0;
2204
2205                 /* Pass the last RPL back to the adapter */
2206                 tp->RplTail->FrameSize = 0;
2207
2208                 /* Reset the CSTAT field in the list. */
2209                 tms380tr_write_rpl_status(tp->RplTail, RX_VALID | RX_FRAME_IRQ);
2210
2211                 /* Current RPL becomes last one in list. */
2212                 tp->RplTail = tp->RplTail->NextRPLPtr;
2213
2214                 /* Inform adapter about RPL valid. */
2215                 tms380tr_exec_sifcmd(dev, CMD_RX_VALID);
2216         }
2217 }
2218
2219 /*
2220  * This function should be used whenever the status of any RPL must be
2221  * modified by the driver, because the compiler may otherwise change the
2222  * order of instructions such that writing the RPL status may be executed
2223  * at an undesirable time. When this function is used, the status is
2224  * always written when the function is called.
2225  */
2226 static void tms380tr_write_rpl_status(RPL *rpl, unsigned int Status)
2227 {
2228         rpl->Status = Status;
2229 }
2230
2231 /*
2232  * The function updates the statistic counters in mac->MacStat.
2233  * It differtiates between directed and broadcast/multicast ( ==functional)
2234  * frames.
2235  */
2236 static void tms380tr_update_rcv_stats(struct net_local *tp, unsigned char DataPtr[],
2237                                         unsigned int Length)
2238 {
2239         tp->MacStat.rx_packets++;
2240         tp->MacStat.rx_bytes += Length;
2241
2242         /* Test functional bit */
2243         if(DataPtr[2] & GROUP_BIT)
2244                 tp->MacStat.multicast++;
2245 }
2246
2247 static int tms380tr_set_mac_address(struct net_device *dev, void *addr)
2248 {
2249         struct net_local *tp = netdev_priv(dev);
2250         struct sockaddr *saddr = addr;
2251
2252         if (tp->AdapterOpenFlag || tp->AdapterVirtOpenFlag) {
2253                 printk(KERN_WARNING "%s: Cannot set MAC/LAA address while card is open\n", dev->name);
2254                 return -EIO;
2255         }
2256         memcpy(dev->dev_addr, saddr->sa_data, dev->addr_len);
2257         return 0;
2258 }
2259
2260 #if TMS380TR_DEBUG > 0
2261 /*
2262  * Dump Packet (data)
2263  */
2264 static void tms380tr_dump(unsigned char *Data, int length)
2265 {
2266         int i, j;
2267
2268         for (i = 0, j = 0; i < length / 8; i++, j += 8)
2269         {
2270                 printk(KERN_DEBUG "%02x %02x %02x %02x %02x %02x %02x %02x\n",
2271                        Data[j+0],Data[j+1],Data[j+2],Data[j+3],
2272                        Data[j+4],Data[j+5],Data[j+6],Data[j+7]);
2273         }
2274 }
2275 #endif
2276
2277 void tmsdev_term(struct net_device *dev)
2278 {
2279         struct net_local *tp;
2280
2281         tp = netdev_priv(dev);
2282         dma_unmap_single(tp->pdev, tp->dmabuffer, sizeof(struct net_local),
2283                 DMA_BIDIRECTIONAL);
2284 }
2285
2286 const struct net_device_ops tms380tr_netdev_ops = {
2287         .ndo_open               = tms380tr_open,
2288         .ndo_stop               = tms380tr_close,
2289         .ndo_start_xmit         = tms380tr_send_packet,
2290         .ndo_tx_timeout         = tms380tr_timeout,
2291         .ndo_get_stats          = tms380tr_get_stats,
2292         .ndo_set_multicast_list = tms380tr_set_multicast_list,
2293         .ndo_set_mac_address    = tms380tr_set_mac_address,
2294 };
2295 EXPORT_SYMBOL(tms380tr_netdev_ops);
2296
2297 int tmsdev_init(struct net_device *dev, struct device *pdev)
2298 {
2299         struct net_local *tms_local;
2300
2301         memset(netdev_priv(dev), 0, sizeof(struct net_local));
2302         tms_local = netdev_priv(dev);
2303         init_waitqueue_head(&tms_local->wait_for_tok_int);
2304         if (pdev->dma_mask)
2305                 tms_local->dmalimit = *pdev->dma_mask;
2306         else
2307                 return -ENOMEM;
2308         tms_local->pdev = pdev;
2309         tms_local->dmabuffer = dma_map_single(pdev, (void *)tms_local,
2310             sizeof(struct net_local), DMA_BIDIRECTIONAL);
2311         if (tms_local->dmabuffer + sizeof(struct net_local) >
2312                         tms_local->dmalimit)
2313         {
2314                 printk(KERN_INFO "%s: Memory not accessible for DMA\n",
2315                         dev->name);
2316                 tmsdev_term(dev);
2317                 return -ENOMEM;
2318         }
2319
2320         dev->netdev_ops         = &tms380tr_netdev_ops;
2321         dev->watchdog_timeo     = HZ;
2322
2323         return 0;
2324 }
2325
2326 EXPORT_SYMBOL(tms380tr_open);
2327 EXPORT_SYMBOL(tms380tr_close);
2328 EXPORT_SYMBOL(tms380tr_interrupt);
2329 EXPORT_SYMBOL(tmsdev_init);
2330 EXPORT_SYMBOL(tmsdev_term);
2331 EXPORT_SYMBOL(tms380tr_wait);
2332
2333 #ifdef MODULE
2334
2335 static struct module *TMS380_module = NULL;
2336
2337 int init_module(void)
2338 {
2339         printk(KERN_DEBUG "%s", version);
2340
2341         TMS380_module = &__this_module;
2342         return 0;
2343 }
2344
2345 void cleanup_module(void)
2346 {
2347         TMS380_module = NULL;
2348 }
2349 #endif
2350
2351 MODULE_LICENSE("GPL");
2352