]> rtime.felk.cvut.cz Git - linux-imx.git/commitdiff
iio:dac: Add support for the AD7303
authorLars-Peter Clausen <lars@metafoo.de>
Tue, 11 Jun 2013 16:56:00 +0000 (17:56 +0100)
committerJonathan Cameron <jic23@kernel.org>
Tue, 11 Jun 2013 19:25:58 +0000 (20:25 +0100)
This patch adds support for the AD7303. The AD7303 is a simple 2 channel 8 bit
DAC with an SPI interface.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Documentation/devicetree/bindings/iio/dac/ad7303.txt [new file with mode: 0644]
drivers/iio/dac/Kconfig
drivers/iio/dac/Makefile
drivers/iio/dac/ad7303.c [new file with mode: 0644]
include/linux/platform_data/ad7303.h [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/iio/dac/ad7303.txt b/Documentation/devicetree/bindings/iio/dac/ad7303.txt
new file mode 100644 (file)
index 0000000..914610f
--- /dev/null
@@ -0,0 +1,23 @@
+Analog Devices AD7303 DAC device driver
+
+Required properties:
+       - compatible: Must be "adi,ad7303"
+       - reg: SPI chip select number for the device
+       - spi-max-frequency: Max SPI frequency to use (< 30000000)
+       - Vdd-supply: Phandle to the Vdd power supply
+
+Optional properties:
+       - REF-supply: Phandle to the external reference voltage supply. This should
+         only be set if there is an external reference voltage connected to the REF
+         pin. If the property is not set Vdd/2 is used as the reference voltage.
+
+Example:
+
+               ad7303@4 {
+                       compatible = "adi,ad7303";
+                       reg = <4>;
+                       spi-max-frequency = <10000000>;
+                       Vdd-supply = <&vdd_supply>;
+                       adi,use-external-reference;
+                       REF-supply = <&vref_supply>;
+               };
index b61160bd935eafffd7e04207a0e0fb043f87450f..c9c33ce32d3a729fc4e325a96f388116f35ee63e 100644 (file)
@@ -130,6 +130,16 @@ config AD5686
          To compile this driver as a module, choose M here: the
          module will be called ad5686.
 
+config AD7303
+       tristate "Analog Devices Analog Devices AD7303 DAC driver"
+       depends on SPI
+       help
+         Say yes here to build support for Analog Devices AD7303 Digital to Analog
+         Converters (DAC).
+
+         To compile this driver as module choose M here: the module will be called
+         ad7303.
+
 config MAX517
        tristate "Maxim MAX517/518/519 DAC driver"
        depends on I2C
index 5b528ebb3343c60d260506821510ea60316da26f..c8d7ab6bff01b8b97ddbd3a020811a588a4f08c8 100644 (file)
@@ -14,5 +14,6 @@ obj-$(CONFIG_AD5755) += ad5755.o
 obj-$(CONFIG_AD5764) += ad5764.o
 obj-$(CONFIG_AD5791) += ad5791.o
 obj-$(CONFIG_AD5686) += ad5686.o
+obj-$(CONFIG_AD7303) += ad7303.o
 obj-$(CONFIG_MAX517) += max517.o
 obj-$(CONFIG_MCP4725) += mcp4725.o
diff --git a/drivers/iio/dac/ad7303.c b/drivers/iio/dac/ad7303.c
new file mode 100644 (file)
index 0000000..85aeef6
--- /dev/null
@@ -0,0 +1,315 @@
+/*
+ * AD7303 Digital to analog converters driver
+ *
+ * Copyright 2013 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include <linux/platform_data/ad7303.h>
+
+#define AD7303_CFG_EXTERNAL_VREF BIT(15)
+#define AD7303_CFG_POWER_DOWN(ch) BIT(11 + (ch))
+#define AD7303_CFG_ADDR_OFFSET 10
+
+#define AD7303_CMD_UPDATE_DAC  (0x3 << 8)
+
+/**
+ * struct ad7303_state - driver instance specific data
+ * @spi:               the device for this driver instance
+ * @config:            cached config register value
+ * @dac_cache:         current DAC raw value (chip does not support readback)
+ * @data:              spi transfer buffer
+ */
+
+struct ad7303_state {
+       struct spi_device *spi;
+       uint16_t config;
+       uint8_t dac_cache[2];
+
+       struct regulator *vdd_reg;
+       struct regulator *vref_reg;
+
+       /*
+        * DMA (thus cache coherency maintenance) requires the
+        * transfer buffers to live in their own cache lines.
+        */
+       __be16 data ____cacheline_aligned;
+};
+
+static int ad7303_write(struct ad7303_state *st, unsigned int chan,
+       uint8_t val)
+{
+       st->data = cpu_to_be16(AD7303_CMD_UPDATE_DAC |
+               (chan << AD7303_CFG_ADDR_OFFSET) |
+               st->config | val);
+
+       return spi_write(st->spi, &st->data, sizeof(st->data));
+}
+
+static ssize_t ad7303_read_dac_powerdown(struct iio_dev *indio_dev,
+       uintptr_t private, const struct iio_chan_spec *chan, char *buf)
+{
+       struct ad7303_state *st = iio_priv(indio_dev);
+
+       return sprintf(buf, "%d\n", (bool)(st->config &
+               AD7303_CFG_POWER_DOWN(chan->channel)));
+}
+
+static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev,
+        uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
+        size_t len)
+{
+       struct ad7303_state *st = iio_priv(indio_dev);
+       bool pwr_down;
+       int ret;
+
+       ret = strtobool(buf, &pwr_down);
+       if (ret)
+               return ret;
+
+       mutex_lock(&indio_dev->mlock);
+
+       if (pwr_down)
+               st->config |= AD7303_CFG_POWER_DOWN(chan->channel);
+       else
+               st->config &= ~AD7303_CFG_POWER_DOWN(chan->channel);
+
+       /* There is no noop cmd which allows us to only update the powerdown
+        * mode, so just write one of the DAC channels again */
+       ad7303_write(st, chan->channel, st->dac_cache[chan->channel]);
+
+       mutex_unlock(&indio_dev->mlock);
+       return ret ? ret : len;
+}
+
+static int ad7303_get_vref(struct ad7303_state *st,
+       struct iio_chan_spec const *chan)
+{
+       int ret;
+
+       if (st->config & AD7303_CFG_EXTERNAL_VREF)
+               return regulator_get_voltage(st->vref_reg);
+
+       ret = regulator_get_voltage(st->vdd_reg);
+       if (ret < 0)
+               return ret;
+       return ret / 2;
+}
+
+static int ad7303_read_raw(struct iio_dev *indio_dev,
+       struct iio_chan_spec const *chan, int *val, int *val2, long info)
+{
+       struct ad7303_state *st = iio_priv(indio_dev);
+       int vref_uv;
+
+       switch (info) {
+       case IIO_CHAN_INFO_RAW:
+               *val = st->dac_cache[chan->channel];
+               return IIO_VAL_INT;
+       case IIO_CHAN_INFO_SCALE:
+               vref_uv = ad7303_get_vref(st, chan);
+               if (vref_uv < 0)
+                       return vref_uv;
+
+               *val = 2 * vref_uv / 1000;
+               *val2 = chan->scan_type.realbits;
+
+               return IIO_VAL_FRACTIONAL_LOG2;
+       default:
+               break;
+       }
+       return -EINVAL;
+}
+
+static int ad7303_write_raw(struct iio_dev *indio_dev,
+       struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+       struct ad7303_state *st = iio_priv(indio_dev);
+       int ret;
+
+       switch (mask) {
+       case IIO_CHAN_INFO_RAW:
+               if (val >= (1 << chan->scan_type.realbits) || val < 0)
+                       return -EINVAL;
+
+               mutex_lock(&indio_dev->mlock);
+               ret = ad7303_write(st, chan->address, val);
+               if (ret == 0)
+                       st->dac_cache[chan->channel] = val;
+               mutex_unlock(&indio_dev->mlock);
+               break;
+       default:
+               ret = -EINVAL;
+       }
+
+       return ret;
+}
+
+static const struct iio_info ad7303_info = {
+       .read_raw = ad7303_read_raw,
+       .write_raw = ad7303_write_raw,
+       .driver_module = THIS_MODULE,
+};
+
+static const struct iio_chan_spec_ext_info ad7303_ext_info[] = {
+       {
+               .name = "powerdown",
+               .read = ad7303_read_dac_powerdown,
+               .write = ad7303_write_dac_powerdown,
+       },
+       { },
+};
+
+#define AD7303_CHANNEL(chan) {                                 \
+       .type = IIO_VOLTAGE,                                    \
+       .indexed = 1,                                           \
+       .output = 1,                                            \
+       .channel = (chan),                                      \
+       .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),           \
+       .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),   \
+       .address = (chan),                                      \
+       .scan_type = {                                          \
+               .sign = 'u',                                    \
+               .realbits = '8',                                \
+               .storagebits = '8',                             \
+               .shift = '0',                                   \
+       },                                                      \
+       .ext_info = ad7303_ext_info,                            \
+}
+
+static const struct iio_chan_spec ad7303_channels[] = {
+       AD7303_CHANNEL(0),
+       AD7303_CHANNEL(1),
+};
+
+static int ad7303_probe(struct spi_device *spi)
+{
+       const struct spi_device_id *id = spi_get_device_id(spi);
+       struct iio_dev *indio_dev;
+       struct ad7303_state *st;
+       bool ext_ref;
+       int ret;
+
+       indio_dev = iio_device_alloc(sizeof(*st));
+       if (indio_dev == NULL)
+               return -ENOMEM;
+
+       st = iio_priv(indio_dev);
+       spi_set_drvdata(spi, indio_dev);
+
+       st->spi = spi;
+
+       st->vdd_reg = regulator_get(&spi->dev, "Vdd");
+       if (IS_ERR(st->vdd_reg)) {
+               ret = PTR_ERR(st->vdd_reg);
+               goto err_free;
+       }
+
+       ret = regulator_enable(st->vdd_reg);
+       if (ret)
+               goto err_put_vdd_reg;
+
+       if (spi->dev.of_node) {
+               ext_ref = of_property_read_bool(spi->dev.of_node,
+                               "REF-supply");
+       } else {
+               struct ad7303_platform_data *pdata = spi->dev.platform_data;
+               if (pdata && pdata->use_external_ref)
+                       ext_ref = true;
+               else
+                   ext_ref = false;
+       }
+
+       if (ext_ref) {
+               st->vref_reg = regulator_get(&spi->dev, "REF");
+               if (IS_ERR(st->vref_reg))
+                       goto err_disable_vdd_reg;
+
+               ret = regulator_enable(st->vref_reg);
+               if (ret)
+                       goto err_put_vref_reg;
+
+               st->config |= AD7303_CFG_EXTERNAL_VREF;
+       }
+
+       indio_dev->dev.parent = &spi->dev;
+       indio_dev->name = id->name;
+       indio_dev->info = &ad7303_info;
+       indio_dev->modes = INDIO_DIRECT_MODE;
+       indio_dev->channels = ad7303_channels;
+       indio_dev->num_channels = ARRAY_SIZE(ad7303_channels);
+
+       ret = iio_device_register(indio_dev);
+       if (ret)
+               goto err_disable_vref_reg;
+
+       return 0;
+
+err_disable_vref_reg:
+       if (st->vref_reg)
+               regulator_disable(st->vref_reg);
+err_put_vref_reg:
+       if (st->vref_reg)
+               regulator_put(st->vref_reg);
+err_disable_vdd_reg:
+       regulator_disable(st->vdd_reg);
+err_put_vdd_reg:
+       regulator_put(st->vdd_reg);
+err_free:
+       iio_device_free(indio_dev);
+
+       return ret;
+}
+
+static int ad7303_remove(struct spi_device *spi)
+{
+       struct iio_dev *indio_dev = spi_get_drvdata(spi);
+       struct ad7303_state *st = iio_priv(indio_dev);
+
+       iio_device_unregister(indio_dev);
+
+       if (st->vref_reg) {
+               regulator_disable(st->vref_reg);
+               regulator_put(st->vref_reg);
+       }
+       regulator_disable(st->vdd_reg);
+       regulator_put(st->vdd_reg);
+
+       iio_device_free(indio_dev);
+
+       return 0;
+}
+
+static const struct spi_device_id ad7303_spi_ids[] = {
+       { "ad7303", 0 },
+       {}
+};
+MODULE_DEVICE_TABLE(spi, ad7303_spi_ids);
+
+static struct spi_driver ad7303_driver = {
+       .driver = {
+               .name = "ad7303",
+               .owner = THIS_MODULE,
+       },
+       .probe = ad7303_probe,
+       .remove = ad7303_remove,
+       .id_table = ad7303_spi_ids,
+};
+module_spi_driver(ad7303_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices AD7303 DAC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/platform_data/ad7303.h b/include/linux/platform_data/ad7303.h
new file mode 100644 (file)
index 0000000..de6a7a6
--- /dev/null
@@ -0,0 +1,21 @@
+/*
+ * Analog Devices AD7303 DAC driver
+ *
+ * Copyright 2013 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __IIO_ADC_AD7303_H__
+#define __IIO_ADC_AD7303_H__
+
+/**
+ * struct ad7303_platform_data - AD7303 platform data
+ * @use_external_ref: If set to true use an external voltage reference connected
+ * to the REF pin, otherwise use the internal reference derived from Vdd.
+ */
+struct ad7303_platform_data {
+       bool use_external_ref;
+};
+
+#endif