*/
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/mutex.h>
+#include <linux/pm_qos.h>
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
mutex_unlock(&acpi_pm_notifier_lock);
return status;
}
+
+/**
+ * acpi_device_power_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @adev: ACPI device node corresponding to @dev.
+ * @target_state: System state to match the resultant device state.
+ * @d_max_in: Deepest low-power state to take into consideration.
+ * @d_min_p: Location to store the upper limit of the allowed states range.
+ * Return value: Preferred power state of the device on success, -ENODEV
+ * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
+ *
+ * Find the lowest power (highest number) ACPI device power state that the
+ * device can be in while the system is in the state represented by
+ * @target_state. If @d_min_p is set, the highest power (lowest number) device
+ * power state that @dev can be in for the given system sleep state is stored
+ * at the location pointed to by it.
+ *
+ * Callers must ensure that @dev and @adev are valid pointers and that @adev
+ * actually corresponds to @dev before using this function.
+ */
+int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
+ u32 target_state, int d_max_in, int *d_min_p)
+{
+ char acpi_method[] = "_SxD";
+ unsigned long long d_min, d_max;
+ bool wakeup = false;
+
+ if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
+ return -EINVAL;
+
+ if (d_max_in > ACPI_STATE_D3_HOT) {
+ enum pm_qos_flags_status stat;
+
+ stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF);
+ if (stat == PM_QOS_FLAGS_ALL)
+ d_max_in = ACPI_STATE_D3_HOT;
+ }
+
+ acpi_method[2] = '0' + target_state;
+ /*
+ * If the sleep state is S0, the lowest limit from ACPI is D3,
+ * but if the device has _S0W, we will use the value from _S0W
+ * as the lowest limit from ACPI. Finally, we will constrain
+ * the lowest limit with the specified one.
+ */
+ d_min = ACPI_STATE_D0;
+ d_max = ACPI_STATE_D3;
+
+ /*
+ * If present, _SxD methods return the minimum D-state (highest power
+ * state) we can use for the corresponding S-states. Otherwise, the
+ * minimum D-state is D0 (ACPI 3.x).
+ *
+ * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
+ * provided -- that's our fault recovery, we ignore retval.
+ */
+ if (target_state > ACPI_STATE_S0) {
+ acpi_evaluate_integer(adev->handle, acpi_method, NULL, &d_min);
+ wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
+ && adev->wakeup.sleep_state >= target_state;
+ } else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) !=
+ PM_QOS_FLAGS_NONE) {
+ wakeup = adev->wakeup.flags.valid;
+ }
+
+ /*
+ * If _PRW says we can wake up the system from the target sleep state,
+ * the D-state returned by _SxD is sufficient for that (we assume a
+ * wakeup-aware driver if wake is set). Still, if _SxW exists
+ * (ACPI 3.x), it should return the maximum (lowest power) D-state that
+ * can wake the system. _S0W may be valid, too.
+ */
+ if (wakeup) {
+ acpi_status status;
+
+ acpi_method[3] = 'W';
+ status = acpi_evaluate_integer(adev->handle, acpi_method, NULL,
+ &d_max);
+ if (ACPI_FAILURE(status)) {
+ if (target_state != ACPI_STATE_S0 ||
+ status != AE_NOT_FOUND)
+ d_max = d_min;
+ } else if (d_max < d_min) {
+ /* Warn the user of the broken DSDT */
+ printk(KERN_WARNING "ACPI: Wrong value from %s\n",
+ acpi_method);
+ /* Sanitize it */
+ d_min = d_max;
+ }
+ }
+
+ if (d_max_in < d_min)
+ return -EINVAL;
+ if (d_min_p)
+ *d_min_p = d_min;
+ /* constrain d_max with specified lowest limit (max number) */
+ if (d_max > d_max_in) {
+ for (d_max = d_max_in; d_max > d_min; d_max--) {
+ if (adev->power.states[d_max].flags.valid)
+ break;
+ }
+ }
+ return d_max;
+}
+EXPORT_SYMBOL_GPL(acpi_device_power_state);
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
-#include <linux/pm_qos.h>
#include <asm/io.h>
* Return value: Preferred power state of the device on success, -ENODEV
* (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
*
- * Find the lowest power (highest number) ACPI device power state that the
- * device can be in while the system is in the sleep state represented
- * by %acpi_target_sleep_state. If @d_min_p is set, the highest power (lowest
- * number) device power state that @dev can be in for the given system sleep
- * state is stored at the location pointed to by it.
- *
* The caller must ensure that @dev is valid before using this function.
*/
int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
struct acpi_device *adev;
- char acpi_method[] = "_SxD";
- unsigned long long d_min, d_max;
- bool wakeup = false;
- if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
- return -EINVAL;
if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
- printk(KERN_DEBUG "ACPI handle has no context!\n");
+ dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
return -ENODEV;
}
- if (d_max_in > ACPI_STATE_D3_HOT) {
- enum pm_qos_flags_status stat;
-
- stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF);
- if (stat == PM_QOS_FLAGS_ALL)
- d_max_in = ACPI_STATE_D3_HOT;
- }
-
- acpi_method[2] = '0' + acpi_target_sleep_state;
- /*
- * If the sleep state is S0, the lowest limit from ACPI is D3,
- * but if the device has _S0W, we will use the value from _S0W
- * as the lowest limit from ACPI. Finally, we will constrain
- * the lowest limit with the specified one.
- */
- d_min = ACPI_STATE_D0;
- d_max = ACPI_STATE_D3;
-
- /*
- * If present, _SxD methods return the minimum D-state (highest power
- * state) we can use for the corresponding S-states. Otherwise, the
- * minimum D-state is D0 (ACPI 3.x).
- *
- * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
- * provided -- that's our fault recovery, we ignore retval.
- */
- if (acpi_target_sleep_state > ACPI_STATE_S0) {
- acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
- wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
- && adev->wakeup.sleep_state >= acpi_target_sleep_state;
- } else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) !=
- PM_QOS_FLAGS_NONE) {
- wakeup = adev->wakeup.flags.valid;
- }
-
- /*
- * If _PRW says we can wake up the system from the target sleep state,
- * the D-state returned by _SxD is sufficient for that (we assume a
- * wakeup-aware driver if wake is set). Still, if _SxW exists
- * (ACPI 3.x), it should return the maximum (lowest power) D-state that
- * can wake the system. _S0W may be valid, too.
- */
- if (wakeup) {
- acpi_status status;
-
- acpi_method[3] = 'W';
- status = acpi_evaluate_integer(handle, acpi_method, NULL,
- &d_max);
- if (ACPI_FAILURE(status)) {
- if (acpi_target_sleep_state != ACPI_STATE_S0 ||
- status != AE_NOT_FOUND)
- d_max = d_min;
- } else if (d_max < d_min) {
- /* Warn the user of the broken DSDT */
- printk(KERN_WARNING "ACPI: Wrong value from %s\n",
- acpi_method);
- /* Sanitize it */
- d_min = d_max;
- }
- }
- if (d_max_in < d_min)
- return -EINVAL;
- if (d_min_p)
- *d_min_p = d_min;
- /* constrain d_max with specified lowest limit (max number) */
- if (d_max > d_max_in) {
- for (d_max = d_max_in; d_max > d_min; d_max--) {
- if (adev->power.states[d_max].flags.valid)
- break;
- }
- }
- return d_max;
+ return acpi_device_power_state(dev, adev, acpi_target_sleep_state,
+ d_max_in, d_min_p);
}
EXPORT_SYMBOL(acpi_pm_device_sleep_state);
#endif /* CONFIG_PM */
acpi_notify_handler handler, void *context);
acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
acpi_notify_handler handler);
+int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
+ u32 target_state, int d_max_in, int *d_min_p);
int acpi_pm_device_sleep_state(struct device *, int *, int);
#else
static inline acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
{
return AE_SUPPORT;
}
-static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
+static inline int __acpi_device_power_state(int m, int *p)
{
if (p)
*p = ACPI_STATE_D0;
return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3) ? m : ACPI_STATE_D0;
}
+static inline int acpi_device_power_state(struct device *dev,
+ struct acpi_device *adev,
+ u32 target_state, int d_max_in,
+ int *d_min_p)
+{
+ return __acpi_device_power_state(d_max_in, d_min_p);
+}
+static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
+{
+ return __acpi_device_power_state(m, p);
+}
#endif
#ifdef CONFIG_PM_RUNTIME
projects / linux-imx.git / commitdiff