staging: comedi: ni_labpc: tidy up subdevice init

Add some whitespace to the subdevice init.

Remove the unnecessary comment about adding command support to
the analog input subdevice and change the 'maxdata' value to hex
as this is more common in comedi drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 94de40b273de1a8a90bd7bb971877a39859f61d1..33e9f4dee6d3cb536efd22caf90de1c74918803d 100644 (file)
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -1673,7 +1673,6 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
 #ifdef CONFIG_ISA_DMA_API
        unsigned long dma_flags;
 #endif
-       short lsb, msb;
        int ret;
 
        dev_info(dev->class_dev, "ni_labpc: %s\n", board->name);
@@ -1775,20 +1774,18 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
        /* analog output */
        s = &dev->subdevices[1];
        if (board->has_ao) {
-               /*
-                * Could provide command support, except it only has a
-                * one sample hardware buffer for analog output and no
-                * underrun flag.
-                */
-               s->type = COMEDI_SUBD_AO;
-               s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_GROUND;
-               s->n_chan = NUM_AO_CHAN;
-               s->maxdata = (1 << 12) - 1;     /*  12 bit resolution */
-               s->range_table = &range_labpc_ao;
-               s->insn_read = labpc_ao_insn_read;
-               s->insn_write = labpc_ao_insn_write;
+               s->type         = COMEDI_SUBD_AO;
+               s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_GROUND;
+               s->n_chan       = NUM_AO_CHAN;
+               s->maxdata      = 0x0fff;
+               s->range_table  = &range_labpc_ao;
+               s->insn_read    = labpc_ao_insn_read;
+               s->insn_write   = labpc_ao_insn_write;
+
                /* initialize analog outputs to a known value */
                for (i = 0; i < s->n_chan; i++) {
+                       short lsb, msb;
+
                        devpriv->ao_value[i] = s->maxdata / 2;
                        lsb = devpriv->ao_value[i] & 0xff;
                        msb = (devpriv->ao_value[i] >> 8) & 0xff;
@@ -1796,7 +1793,7 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
                        devpriv->write_byte(msb, dev->iobase + DAC_MSB_REG(i));
                }
        } else {
-               s->type = COMEDI_SUBD_UNUSED;
+               s->type         = COMEDI_SUBD_UNUSED;
        }
 
        /* 8255 dio */
@@ -1810,32 +1807,32 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
        /*  calibration subdevices for boards that have one */
        s = &dev->subdevices[3];
        if (board->register_layout == labpc_1200_layout) {
-               s->type = COMEDI_SUBD_CALIB;
-               s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
-               s->n_chan = 16;
-               s->maxdata = 0xff;
-               s->insn_read = labpc_calib_insn_read;
-               s->insn_write = labpc_calib_insn_write;
+               s->type         = COMEDI_SUBD_CALIB;
+               s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
+               s->n_chan       = 16;
+               s->maxdata      = 0xff;
+               s->insn_read    = labpc_calib_insn_read;
+               s->insn_write   = labpc_calib_insn_write;
 
                for (i = 0; i < s->n_chan; i++)
                        write_caldac(dev, i, s->maxdata / 2);
        } else
-               s->type = COMEDI_SUBD_UNUSED;
+               s->type         = COMEDI_SUBD_UNUSED;
 
        /* EEPROM */
        s = &dev->subdevices[4];
        if (board->register_layout == labpc_1200_layout) {
-               s->type = COMEDI_SUBD_MEMORY;
-               s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
-               s->n_chan = EEPROM_SIZE;
-               s->maxdata = 0xff;
-               s->insn_read = labpc_eeprom_insn_read;
-               s->insn_write = labpc_eeprom_insn_write;
-
-               for (i = 0; i < EEPROM_SIZE; i++)
+               s->type         = COMEDI_SUBD_MEMORY;
+               s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL;
+               s->n_chan       = EEPROM_SIZE;
+               s->maxdata      = 0xff;
+               s->insn_read    = labpc_eeprom_insn_read;
+               s->insn_write   = labpc_eeprom_insn_write;
+
+               for (i = 0; i < s->n_chan; i++)
                        devpriv->eeprom_data[i] = labpc_eeprom_read(dev, i);
        } else
-               s->type = COMEDI_SUBD_UNUSED;
+               s->type         = COMEDI_SUBD_UNUSED;
 
        return 0;
 }