#include <asm/mipsregs.h>
#include <asm/cacheflush.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <asm/smtc_proc.h>
struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS];
-static struct proc_dir_entry *smtc_stats;
-
atomic_t smtc_fpu_recoveries;
-static int proc_read_smtc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int smtc_proc_show(struct seq_file *m, void *v)
{
- int totalen = 0;
- int len;
int i;
extern unsigned long ebase;
- len = sprintf(page, "SMTC Status Word: 0x%08x\n", smtc_status);
- totalen += len;
- page += len;
- len = sprintf(page, "Config7: 0x%08x\n", read_c0_config7());
- totalen += len;
- page += len;
- len = sprintf(page, "EBASE: 0x%08lx\n", ebase);
- totalen += len;
- page += len;
- len = sprintf(page, "Counter Interrupts taken per CPU (TC)\n");
- totalen += len;
- page += len;
- for (i=0; i < NR_CPUS; i++) {
- len = sprintf(page, "%d: %ld\n", i, smtc_cpu_stats[i].timerints);
- totalen += len;
- page += len;
- }
- len = sprintf(page, "Self-IPIs by CPU:\n");
- totalen += len;
- page += len;
- for(i = 0; i < NR_CPUS; i++) {
- len = sprintf(page, "%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
- totalen += len;
- page += len;
- }
- len = sprintf(page, "%d Recoveries of \"stolen\" FPU\n",
- atomic_read(&smtc_fpu_recoveries));
- totalen += len;
- page += len;
+ seq_printf(m, "SMTC Status Word: 0x%08x\n", smtc_status);
+ seq_printf(m, "Config7: 0x%08x\n", read_c0_config7());
+ seq_printf(m, "EBASE: 0x%08lx\n", ebase);
+ seq_printf(m, "Counter Interrupts taken per CPU (TC)\n");
+ for (i=0; i < NR_CPUS; i++)
+ seq_printf(m, "%d: %ld\n", i, smtc_cpu_stats[i].timerints);
+ seq_printf(m, "Self-IPIs by CPU:\n");
+ for(i = 0; i < NR_CPUS; i++)
+ seq_printf(m, "%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
+ seq_printf(m, "%d Recoveries of \"stolen\" FPU\n",
+ atomic_read(&smtc_fpu_recoveries));
+ return 0;
+}
- return totalen;
+static int smtc_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, smtc_proc_show, NULL);
}
+static const struct file_operations smtc_proc_fops = {
+ .open = smtc_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
void init_smtc_stats(void)
{
int i;
atomic_set(&smtc_fpu_recoveries, 0);
- smtc_stats = create_proc_read_entry("smtc", 0444, NULL,
- proc_read_smtc, NULL);
+ proc_create("smtc", 0444, NULL, &smtc_proc_fops);
}
/*****************************************************************************
*
- * FUNCTION: read_msp_pci_counts
+ * FUNCTION: show_msp_pci_counts
* _________________________________________________________________________
*
* DESCRIPTION: Prints the count of how many times each PCI
* interrupt has asserted. Can be invoked by the
* /proc filesystem.
*
- * INPUTS: page - part of STDOUT calculation
- * off - part of STDOUT calculation
- * count - part of STDOUT calculation
- * data - unused
+ * INPUTS: m - synthetic file construction data
+ * v - iterator
*
- * OUTPUTS: start - new start location
- * eof - end of file pointer
- *
- * RETURNS: len - STDOUT length
+ * RETURNS: 0 or error
*
****************************************************************************/
-static int read_msp_pci_counts(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int show_msp_pci_counts(struct seq_file *m, void *v)
{
int i;
- int len = 0;
unsigned int intcount, total = 0;
for (i = 0; i < 32; ++i) {
intcount = pci_int_count[i];
if (intcount != 0) {
- len += sprintf(page + len, "[%d] = %u\n", i, intcount);
+ seq_printf(m, "[%d] = %u\n", i, intcount);
total += intcount;
}
}
- len += sprintf(page + len, "total = %u\n", total);
- if (len <= off+count)
- *eof = 1;
-
- *start = page + off;
- len -= off;
- if (len > count)
- len = count;
- if (len < 0)
- len = 0;
+ seq_printf(m, "total = %u\n", total);
+ return 0;
+}
- return len;
+static int msp_pci_rd_cnt_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, show_msp_pci_counts, NULL);
}
+static const struct file_operations msp_pci_rd_cnt_fops = {
+ .open = msp_pci_rd_cnt_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
/*****************************************************************************
*
- * FUNCTION: gen_pci_cfg_wr
+ * FUNCTION: gen_pci_cfg_wr_show
* _________________________________________________________________________
*
* DESCRIPTION: Generates a configuration write cycle for debug purposes.
* PCI bus. Intent is that this function by invocable from
* the /proc filesystem.
*
- * INPUTS: page - part of STDOUT calculation
- * off - part of STDOUT calculation
- * count - part of STDOUT calculation
- * data - unused
+ * INPUTS: m - synthetic file construction data
+ * v - iterator
*
- * OUTPUTS: start - new start location
- * eof - end of file pointer
- *
- * RETURNS: len - STDOUT length
+ * RETURNS: 0 or error
*
****************************************************************************/
-static int gen_pci_cfg_wr(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int gen_pci_cfg_wr_show(struct seq_file *m, void *v)
{
unsigned char where = 0; /* Write to static Device/Vendor ID */
unsigned char bus_num = 0; /* Bus 0 */
unsigned char dev_fn = 0xF; /* Arbitrary device number */
u32 wr_data = 0xFF00AA00; /* Arbitrary data */
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
- int len = 0;
unsigned long value;
int intr;
- len += sprintf(page + len, "PMC MSP PCI: Beginning\n");
+ seq_puts(m, "PMC MSP PCI: Beginning\n");
if (proc_init == 0) {
pci_proc_init();
proc_init = ~0;
}
- len += sprintf(page + len, "PMC MSP PCI: Before Cfg Wr\n");
+ seq_puts(m, "PMC MSP PCI: Before Cfg Wr\n");
/*
* Generate PCI Configuration Write Cycle
*/
intr = preg->if_status;
- len += sprintf(page + len, "PMC MSP PCI: After Cfg Wr\n");
-
- /* Handle STDOUT calculations */
- if (len <= off+count)
- *eof = 1;
- *start = page + off;
- len -= off;
- if (len > count)
- len = count;
- if (len < 0)
- len = 0;
+ seq_puts(m, "PMC MSP PCI: After Cfg Wr\n");
+ return 0;
+}
- return len;
+static int gen_pci_cfg_wr_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, gen_pci_cfg_wr_show, NULL);
}
+static const struct file_operations gen_pci_cfg_wr_fops = {
+ .open = gen_pci_cfg_wr_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
/*****************************************************************************
*
* FUNCTION: pci_proc_init
****************************************************************************/
static void pci_proc_init(void)
{
- create_proc_read_entry("pmc_msp_pci_rd_cnt", 0, NULL,
- read_msp_pci_counts, NULL);
- create_proc_read_entry("pmc_msp_pci_cfg_wr", 0, NULL,
- gen_pci_cfg_wr, NULL);
+ proc_create("pmc_msp_pci_rd_cnt", 0, NULL, &msp_pci_rd_cnt_fops);
+ proc_create("pmc_msp_pci_cfg_wr", 0, NULL, &gen_pci_cfg_wr_fops);
}
#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <asm/io.h>
#include <asm/sibyte/sb1250.h>
printk("Bus watcher indicates no error\n");
}
-static int bw_print_buffer(char *page, struct bw_stats_struct *stats)
+#ifdef CONFIG_PROC_FS
+
+/* For simplicity, I want to assume a single read is required each
+ time */
+static int bw_proc_show(struct seq_file *m, void *v)
{
- int len;
-
- len = sprintf(page, "SiByte Bus Watcher statistics\n");
- len += sprintf(page+len, "-----------------------------\n");
- len += sprintf(page+len, "L2-d-cor %8ld\nL2-d-bad %8ld\n",
- stats->l2_cor_d, stats->l2_bad_d);
- len += sprintf(page+len, "L2-t-cor %8ld\nL2-t-bad %8ld\n",
- stats->l2_cor_t, stats->l2_bad_t);
- len += sprintf(page+len, "MC-d-cor %8ld\nMC-d-bad %8ld\n",
- stats->mem_cor_d, stats->mem_bad_d);
- len += sprintf(page+len, "IO-err %8ld\n", stats->bus_error);
- len += sprintf(page+len, "\nLast recorded signature:\n");
- len += sprintf(page+len, "Request %02x from %d, answered by %d with Dcode %d\n",
- (unsigned int)(G_SCD_BERR_TID(stats->status) & 0x3f),
- (int)(G_SCD_BERR_TID(stats->status) >> 6),
- (int)G_SCD_BERR_RID(stats->status),
- (int)G_SCD_BERR_DCODE(stats->status));
+ struct bw_stats_struct *stats = m->private;
+
+ seq_puts(m, "SiByte Bus Watcher statistics\n");
+ seq_puts(m, "-----------------------------\n");
+ seq_printf(m, "L2-d-cor %8ld\nL2-d-bad %8ld\n",
+ stats->l2_cor_d, stats->l2_bad_d);
+ seq_printf(m, "L2-t-cor %8ld\nL2-t-bad %8ld\n",
+ stats->l2_cor_t, stats->l2_bad_t);
+ seq_printf(m, "MC-d-cor %8ld\nMC-d-bad %8ld\n",
+ stats->mem_cor_d, stats->mem_bad_d);
+ seq_printf(m, "IO-err %8ld\n", stats->bus_error);
+ seq_puts(m, "\nLast recorded signature:\n");
+ seq_printf(m, "Request %02x from %d, answered by %d with Dcode %d\n",
+ (unsigned int)(G_SCD_BERR_TID(stats->status) & 0x3f),
+ (int)(G_SCD_BERR_TID(stats->status) >> 6),
+ (int)G_SCD_BERR_RID(stats->status),
+ (int)G_SCD_BERR_DCODE(stats->status));
/* XXXKW indicate multiple errors between printings, or stats
collection (or both)? */
if (stats->status & M_SCD_BERR_MULTERRS)
- len += sprintf(page+len, "Multiple errors observed since last check.\n");
+ seq_puts(m, "Multiple errors observed since last check.\n");
if (stats->status_printed) {
- len += sprintf(page+len, "(no change since last printing)\n");
+ seq_puts(m, "(no change since last printing)\n");
} else {
stats->status_printed = 1;
}
- return len;
+ return 0;
}
-#ifdef CONFIG_PROC_FS
-
-/* For simplicity, I want to assume a single read is required each
- time */
-static int bw_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int bw_proc_open(struct inode *inode, struct file *file)
{
- int len;
-
- if (off == 0) {
- len = bw_print_buffer(page, data);
- *start = page;
- } else {
- len = 0;
- *eof = 1;
- }
- return len;
+ return single_open(file, bw_proc_show, PDE_DATA(inode));
}
+static const struct file_operations bw_proc_fops = {
+ .open = bw_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
static void create_proc_decoder(struct bw_stats_struct *stats)
{
struct proc_dir_entry *ent;
- ent = create_proc_read_entry("bus_watcher", S_IWUSR | S_IRUGO, NULL,
- bw_read_proc, stats);
+ ent = proc_create_data("bus_watcher", S_IWUSR | S_IRUGO, NULL,
+ &bw_proc_fops, stats);
if (!ent) {
printk(KERN_INFO "Unable to initialize bus_watcher /proc entry\n");
return;
stats->bus_error += G_SCD_MEM_BUSERR(cntr);
csr_out32(0, IOADDR(A_BUS_MEM_IO_ERRORS));
-#ifndef CONFIG_PROC_FS
- bw_print_buffer(bw_buf, stats);
- printk(bw_buf);
-#endif
-
return IRQ_HANDLED;
}
projects / linux-imx.git / commitdiff