-/*
+/*
* ASCII values for a number of symbolic constants, printing functions,
* etc.
* Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422)
* Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
* by D. Gilbert and aeb (20020609)
- * Update to SPC-4 T10/1713-D Rev 20, 22 May 2009, D. Gilbert 20090624
+ * Updated to SPC-4 T10/1713-D Rev 36g, D. Gilbert 20130701
*/
#include <linux/blkdev.h>
/* Commands with service actions that change the command name */
-#define MAINTENANCE_IN 0xa3
-#define MAINTENANCE_OUT 0xa4
#define SERVICE_ACTION_IN_12 0xab
#define SERVICE_ACTION_OUT_12 0xa9
+#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
#define SERVICE_ACTION_IN_16 0x9e
#define SERVICE_ACTION_OUT_16 0x9f
+#define THIRD_PARTY_COPY_OUT 0x83
+#define THIRD_PARTY_COPY_IN 0x84
/* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
"Reassign Blocks",
/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
-/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
+/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
"Reserve(6)",
/* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)",
-/* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic",
+/* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic",
/* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
/* 20-22 */ NULL, NULL, NULL,
/* 23-28 */ "Read Format Capacities", "Set Window",
/* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)",
"Read updated block",
/* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal",
-/* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position",
+/* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position",
/* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)",
- "Read Defect Data(10)",
-/* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer",
- "Read Buffer",
+ "Read Defect Data(10)",
+/* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer",
+ "Read Buffer",
/* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)",
/* 40-41 */ "Change Definition", "Write Same(10)",
/* 42-48 */ "Unmap/Read sub-channel", "Read TOC/PMA/ATIP",
"Read density support", "Play audio(10)", "Get configuration",
- "Play audio msf", "Play audio track/index",
+ "Play audio msf", "Sanitize/Play audio track/index",
/* 49-4f */ "Play track relative(10)", "Get event status notification",
"Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
NULL,
/* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, "Extended CDB",
"Variable length",
-/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy",
- "Receive copy results",
+/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)",
+ "Third party copy out", "Third party copy in",
/* 85-89 */ "ATA command pass through(16)", "Access control in",
- "Access control out", "Read(16)", "Memory Export Out(16)",
+ "Access control out", "Read(16)", "Compare and Write",
/* 8a-8f */ "Write(16)", "ORWrite", "Read attributes", "Write attributes",
"Write and verify(16)", "Verify(16)",
/* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)",
"Lock/unlock cache(16)", "Write same(16)", NULL,
/* 95-99 */ NULL, NULL, NULL, NULL, NULL,
-/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)",
- "Service action out(16)",
+/* 9a-9f */ NULL, NULL, NULL, "Service action bidirectional",
+ "Service action in(16)", "Service action out(16)",
/* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank",
"Security protocol in", "Maintenance in", "Maintenance out",
"Move medium/play audio(12)",
{0x6, "Set identifying information"},
{0xa, "Set target port groups"},
{0xb, "Change aliases"},
+ {0xc, "Remove I_T nexus"},
{0xe, "Set priority"},
{0xf, "Set timestamp"},
{0x10, "Management protocol out"},
};
#define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr)
+static const struct value_name_pair serv_bidi_arr[] = {
+ {-1, "dummy entry"},
+};
+#define SERV_BIDI_SZ ARRAY_SIZE(serv_bidi_arr)
+
static const struct value_name_pair serv_in16_arr[] = {
{0x10, "Read capacity(16)"},
{0x11, "Read long(16)"},
{0x12, "Get LBA status"},
+ {0x13, "Report referrals"},
};
#define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr)
};
#define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr)
+static const struct value_name_pair pr_in_arr[] = {
+ {0x0, "Persistent reserve in, read keys"},
+ {0x1, "Persistent reserve in, read reservation"},
+ {0x2, "Persistent reserve in, report capabilities"},
+ {0x3, "Persistent reserve in, read full status"},
+};
+#define PR_IN_SZ ARRAY_SIZE(pr_in_arr)
+
+static const struct value_name_pair pr_out_arr[] = {
+ {0x0, "Persistent reserve out, register"},
+ {0x1, "Persistent reserve out, reserve"},
+ {0x2, "Persistent reserve out, release"},
+ {0x3, "Persistent reserve out, clear"},
+ {0x4, "Persistent reserve out, preempt"},
+ {0x5, "Persistent reserve out, preempt and abort"},
+ {0x6, "Persistent reserve out, register and ignore existing key"},
+ {0x7, "Persistent reserve out, register and move"},
+};
+#define PR_OUT_SZ ARRAY_SIZE(pr_out_arr)
+
+/* SPC-4 rev 34 renamed the Extended Copy opcode to Third Party Copy Out.
+ LID1 (List Identifier length: 1 byte) is the Extended Copy found in SPC-2
+ and SPC-3 */
+static const struct value_name_pair tpc_out_arr[] = {
+ {0x0, "Extended copy(LID1)"},
+ {0x1, "Extended copy(LID4)"},
+ {0x10, "Populate token"},
+ {0x11, "Write using token"},
+ {0x1c, "Copy operation abort"},
+};
+#define TPC_OUT_SZ ARRAY_SIZE(tpc_out_arr)
+
+static const struct value_name_pair tpc_in_arr[] = {
+ {0x0, "Receive copy status(LID1)"},
+ {0x1, "Receive copy data(LID1)"},
+ {0x3, "Receive copy operating parameters"},
+ {0x4, "Receive copy failure details(LID1)"},
+ {0x5, "Receive copy status(LID4)"},
+ {0x6, "Receive copy data(LID4)"},
+ {0x7, "Receive ROD token information"},
+ {0x8, "Report all ROD tokens"},
+};
+#define TPC_IN_SZ ARRAY_SIZE(tpc_in_arr)
+
+
static const struct value_name_pair variable_length_arr[] = {
{0x1, "Rebuild(32)"},
{0x2, "Regenerate(32)"},
static void print_opcode_name(unsigned char * cdbp, int cdb_len)
{
int sa, len, cdb0;
+ int fin_name = 0;
const char * name;
cdb0 = cdbp[0];
break;
}
sa = (cdbp[8] << 8) + cdbp[9];
- name = get_sa_name(variable_length_arr, VARIABLE_LENGTH_SZ, sa);
+ name = get_sa_name(variable_length_arr, VARIABLE_LENGTH_SZ,
+ sa);
if (name)
printk("%s", name);
else
case MAINTENANCE_IN:
sa = cdbp[1] & 0x1f;
name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ fin_name = 1;
break;
case MAINTENANCE_OUT:
sa = cdbp[1] & 0x1f;
name = get_sa_name(maint_out_arr, MAINT_OUT_SZ, sa);
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ fin_name = 1;
+ break;
+ case PERSISTENT_RESERVE_IN:
+ sa = cdbp[1] & 0x1f;
+ name = get_sa_name(pr_in_arr, PR_IN_SZ, sa);
+ fin_name = 1;
+ break;
+ case PERSISTENT_RESERVE_OUT:
+ sa = cdbp[1] & 0x1f;
+ name = get_sa_name(pr_out_arr, PR_OUT_SZ, sa);
+ fin_name = 1;
break;
case SERVICE_ACTION_IN_12:
sa = cdbp[1] & 0x1f;
name = get_sa_name(serv_in12_arr, SERV_IN12_SZ, sa);
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ fin_name = 1;
break;
case SERVICE_ACTION_OUT_12:
sa = cdbp[1] & 0x1f;
name = get_sa_name(serv_out12_arr, SERV_OUT12_SZ, sa);
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ fin_name = 1;
+ break;
+ case SERVICE_ACTION_BIDIRECTIONAL:
+ sa = cdbp[1] & 0x1f;
+ name = get_sa_name(serv_bidi_arr, SERV_BIDI_SZ, sa);
+ fin_name = 1;
break;
case SERVICE_ACTION_IN_16:
sa = cdbp[1] & 0x1f;
name = get_sa_name(serv_in16_arr, SERV_IN16_SZ, sa);
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ fin_name = 1;
break;
case SERVICE_ACTION_OUT_16:
sa = cdbp[1] & 0x1f;
name = get_sa_name(serv_out16_arr, SERV_OUT16_SZ, sa);
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ fin_name = 1;
+ break;
+ case THIRD_PARTY_COPY_IN:
+ sa = cdbp[1] & 0x1f;
+ name = get_sa_name(tpc_in_arr, TPC_IN_SZ, sa);
+ fin_name = 1;
+ break;
+ case THIRD_PARTY_COPY_OUT:
+ sa = cdbp[1] & 0x1f;
+ name = get_sa_name(tpc_out_arr, TPC_OUT_SZ, sa);
+ fin_name = 1;
break;
default:
if (cdb0 < 0xc0) {
printk("cdb[0]=0x%x (vendor)", cdb0);
break;
}
+ if (fin_name) {
+ if (name)
+ printk("%s", name);
+ else
+ printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ }
}
#else /* ifndef CONFIG_SCSI_CONSTANTS */
break;
case MAINTENANCE_IN:
case MAINTENANCE_OUT:
+ case PERSISTENT_RESERVE_IN:
+ case PERSISTENT_RESERVE_OUT:
case SERVICE_ACTION_IN_12:
case SERVICE_ACTION_OUT_12:
+ case SERVICE_ACTION_BIDIRECTIONAL:
case SERVICE_ACTION_IN_16:
case SERVICE_ACTION_OUT_16:
+ case THIRD_PARTY_COPY_IN:
+ case THIRD_PARTY_COPY_OUT:
sa = cdbp[1] & 0x1f;
printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
break;
break;
}
}
-#endif
+#endif
void __scsi_print_command(unsigned char *cdb)
{
print_opcode_name(cdb, 0);
len = scsi_command_size(cdb);
/* print out all bytes in cdb */
- for (k = 0; k < len; ++k)
+ for (k = 0; k < len; ++k)
printk(" %02x", cdb[k]);
printk("\n");
}
/*
* The canonical list of T10 Additional Sense Codes is available at:
- * http://www.t10.org/lists/asc-num.txt
+ * http://www.t10.org/lists/asc-num.txt [most recent: 20130605]
*/
+
static const struct error_info additional[] =
{
{0x0000, "No additional sense information"},
{0x001C, "Verify operation in progress"},
{0x001D, "ATA pass through information available"},
{0x001E, "Conflicting SA creation request"},
+ {0x001F, "Logical unit transitioning to another power condition"},
+ {0x0020, "Extended copy information available"},
{0x0100, "No index/sector signal"},
{0x0412, "Logical unit not ready, offline"},
{0x0413, "Logical unit not ready, SA creation in progress"},
{0x0414, "Logical unit not ready, space allocation in progress"},
+ {0x0415, "Logical unit not ready, robotics disabled"},
+ {0x0416, "Logical unit not ready, configuration required"},
+ {0x0417, "Logical unit not ready, calibration required"},
+ {0x0418, "Logical unit not ready, a door is open"},
+ {0x0419, "Logical unit not ready, operating in sequential mode"},
+ {0x041A, "Logical unit not ready, start stop unit command in "
+ "progress"},
+ {0x041B, "Logical unit not ready, sanitize in progress"},
+ {0x041C, "Logical unit not ready, additional power use not yet "
+ "granted"},
+ {0x041D, "Logical unit not ready, configuration in progress"},
{0x0500, "Logical unit does not respond to selection"},
{0x0B06, "Warning - non-volatile cache now volatile"},
{0x0B07, "Warning - degraded power to non-volatile cache"},
{0x0B08, "Warning - power loss expected"},
+ {0x0B09, "Warning - device statistics notification active"},
{0x0C00, "Write error"},
{0x0C01, "Write error - recovered with auto reallocation"},
{0x0C0B, "Auxiliary memory write error"},
{0x0C0C, "Write error - unexpected unsolicited data"},
{0x0C0D, "Write error - not enough unsolicited data"},
+ {0x0C0E, "Multiple write errors"},
{0x0C0F, "Defects in error window"},
{0x0D00, "Error detected by third party temporary initiator"},
{0x1001, "Logical block guard check failed"},
{0x1002, "Logical block application tag check failed"},
{0x1003, "Logical block reference tag check failed"},
+ {0x1004, "Logical block protection error on recover buffered data"},
+ {0x1005, "Logical block protection method error"},
{0x1100, "Unrecovered read error"},
{0x1101, "Read retries exhausted"},
{0x1112, "Auxiliary memory read error"},
{0x1113, "Read error - failed retransmission request"},
{0x1114, "Read error - lba marked bad by application client"},
+ {0x1115, "Write after sanitize required"},
{0x1200, "Address mark not found for id field"},
{0x2009, "Access denied - invalid LU identifier"},
{0x200A, "Access denied - invalid proxy token"},
{0x200B, "Access denied - ACL LUN conflict"},
+ {0x200C, "Illegal command when not in append-only mode"},
{0x2100, "Logical block address out of range"},
{0x2101, "Invalid element address"},
{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
+ {0x2300, "Invalid token operation, cause not reportable"},
+ {0x2301, "Invalid token operation, unsupported token type"},
+ {0x2302, "Invalid token operation, remote token usage not supported"},
+ {0x2303, "Invalid token operation, remote rod token creation not "
+ "supported"},
+ {0x2304, "Invalid token operation, token unknown"},
+ {0x2305, "Invalid token operation, token corrupt"},
+ {0x2306, "Invalid token operation, token revoked"},
+ {0x2307, "Invalid token operation, token expired"},
+ {0x2308, "Invalid token operation, token cancelled"},
+ {0x2309, "Invalid token operation, token deleted"},
+ {0x230A, "Invalid token operation, invalid token length"},
+
{0x2400, "Invalid field in cdb"},
{0x2401, "CDB decryption error"},
{0x2402, "Obsolete"},
"event"},
{0x2A13, "Data encryption key instance counter has changed"},
{0x2A14, "SA creation capabilities data has changed"},
+ {0x2A15, "Medium removal prevention preempted"},
{0x2B00, "Copy cannot execute since host cannot disconnect"},
{0x2C09, "Previous reservation conflict status"},
{0x2C0A, "Partition or collection contains user objects"},
{0x2C0B, "Not reserved"},
+ {0x2C0C, "Orwrite generation does not match"},
{0x2D00, "Overwrite error on update in place"},
{0x2F00, "Commands cleared by another initiator"},
{0x2F01, "Commands cleared by power loss notification"},
{0x2F02, "Commands cleared by device server"},
+ {0x2F03, "Some commands cleared by queuing layer event"},
{0x3000, "Incompatible medium installed"},
{0x3001, "Cannot read medium - unknown format"},
{0x3010, "Medium not formatted"},
{0x3011, "Incompatible volume type"},
{0x3012, "Incompatible volume qualifier"},
+ {0x3013, "Cleaning volume expired"},
{0x3100, "Medium format corrupted"},
{0x3101, "Format command failed"},
{0x3102, "Zoned formatting failed due to spare linking"},
+ {0x3103, "Sanitize command failed"},
{0x3200, "No defect spare location available"},
{0x3201, "Defect list update failure"},
{0x3B19, "Element enabled"},
{0x3B1A, "Data transfer device removed"},
{0x3B1B, "Data transfer device inserted"},
+ {0x3B1C, "Too many logical objects on partition to support "
+ "operation"},
{0x3D00, "Invalid bits in identify message"},
{0x3F12, "iSCSI IP address added"},
{0x3F13, "iSCSI IP address removed"},
{0x3F14, "iSCSI IP address changed"},
+ {0x3F15, "Inspect referrals sense descriptors"},
/*
* {0x40NN, "Ram failure"},
* {0x40NN, "Diagnostic failure on component nn"},
{0x4300, "Message error"},
{0x4400, "Internal target failure"},
+ {0x4401, "Persistent reservation information lost"},
{0x4471, "ATA device failed set features"},
{0x4500, "Select or reselect failure"},
{0x4B04, "Nak received"},
{0x4B05, "Data offset error"},
{0x4B06, "Initiator response timeout"},
+ {0x4B07, "Connection lost"},
+ {0x4B08, "Data-in buffer overflow - data buffer size"},
+ {0x4B09, "Data-in buffer overflow - data buffer descriptor area"},
+ {0x4B0A, "Data-in buffer error"},
+ {0x4B0B, "Data-out buffer overflow - data buffer size"},
+ {0x4B0C, "Data-out buffer overflow - data buffer descriptor area"},
+ {0x4B0D, "Data-out buffer error"},
+ {0x4B0E, "PCIe fabric error"},
+ {0x4B0F, "PCIe completion timeout"},
+ {0x4B10, "PCIe completer abort"},
+ {0x4B11, "PCIe poisoned tlp received"},
+ {0x4B12, "PCIe eCRC check failed"},
+ {0x4B13, "PCIe unsupported request"},
+ {0x4B14, "PCIe acs violation"},
+ {0x4B15, "PCIe tlp prefix blocked"},
{0x4C00, "Logical unit failed self-configuration"},
/*
{0x5302, "Medium removal prevented"},
{0x5303, "Medium removal prevented by data transfer element"},
{0x5304, "Medium thread or unthread failure"},
+ {0x5305, "Volume identifier invalid"},
+ {0x5306, "Volume identifier missing"},
+ {0x5307, "Duplicate volume identifier"},
+ {0x5308, "Element status unknown"},
{0x5400, "Scsi to host system interface failure"},
{0x5508, "Maximum number of supplemental decryption keys exceeded"},
{0x5509, "Medium auxiliary memory not accessible"},
{0x550A, "Data currently unavailable"},
+ {0x550B, "Insufficient power for operation"},
+ {0x550C, "Insufficient resources to create rod"},
+ {0x550D, "Insufficient resources to create rod token"},
{0x5700, "Unable to recover table-of-contents"},
{0x670B, "ATA device feature not enabled"},
{0x6800, "Logical unit not configured"},
+ {0x6801, "Subsidiary logical unit not configured"},
{0x6900, "Data loss on logical unit"},
{0x6901, "Multiple logical unit failures"},
"Vendor Specific(9)",
"Copy Aborted", /* A: COPY or COMPARE was aborted */
"Aborted Command", /* B: The target aborted the command */
- "Equal", /* C: A SEARCH DATA command found data equal */
+ "Equal", /* C: A SEARCH DATA command found data equal,
+ reserved in SPC-4 rev 36 */
"Volume Overflow", /* D: Medium full with still data to be written */
"Miscompare", /* E: Source data and data on the medium
do not agree */
+ "Completed", /* F: command completed sense data reported,
+ may occur for successful command */
};
#endif
struct scsi_sense_hdr *sshdr)
{
int k, num, res;
-
+
res = scsi_normalize_sense(sense_buffer, sense_len, sshdr);
if (0 == res) {
/* this may be SCSI-1 sense data */
scsi_show_result(cmd->result);
}
EXPORT_SYMBOL(scsi_print_result);
-
-
struct fcoe_port *port;
struct net_device *realdev;
int rc;
- struct netdev_fcoe_hbainfo fdmi;
port = lport_priv(lport);
fcoe = port->priv;
return;
if (realdev->netdev_ops->ndo_fcoe_get_hbainfo) {
- memset(&fdmi, 0, sizeof(fdmi));
+ struct netdev_fcoe_hbainfo *fdmi;
+ fdmi = kzalloc(sizeof(*fdmi), GFP_KERNEL);
+ if (!fdmi)
+ return;
+
rc = realdev->netdev_ops->ndo_fcoe_get_hbainfo(realdev,
- &fdmi);
+ fdmi);
if (rc) {
printk(KERN_INFO "fcoe: Failed to retrieve FDMI "
"information from netdev.\n");
snprintf(fc_host_serial_number(lport->host),
FC_SERIAL_NUMBER_SIZE,
"%s",
- fdmi.serial_number);
+ fdmi->serial_number);
snprintf(fc_host_manufacturer(lport->host),
FC_SERIAL_NUMBER_SIZE,
"%s",
- fdmi.manufacturer);
+ fdmi->manufacturer);
snprintf(fc_host_model(lport->host),
FC_SYMBOLIC_NAME_SIZE,
"%s",
- fdmi.model);
+ fdmi->model);
snprintf(fc_host_model_description(lport->host),
FC_SYMBOLIC_NAME_SIZE,
"%s",
- fdmi.model_description);
+ fdmi->model_description);
snprintf(fc_host_hardware_version(lport->host),
FC_VERSION_STRING_SIZE,
"%s",
- fdmi.hardware_version);
+ fdmi->hardware_version);
snprintf(fc_host_driver_version(lport->host),
FC_VERSION_STRING_SIZE,
"%s",
- fdmi.driver_version);
+ fdmi->driver_version);
snprintf(fc_host_optionrom_version(lport->host),
FC_VERSION_STRING_SIZE,
"%s",
- fdmi.optionrom_version);
+ fdmi->optionrom_version);
snprintf(fc_host_firmware_version(lport->host),
FC_VERSION_STRING_SIZE,
"%s",
- fdmi.firmware_version);
+ fdmi->firmware_version);
/* Enable FDMI lport states */
lport->fdmi_enabled = 1;
+ kfree(fdmi);
} else {
lport->fdmi_enabled = 0;
printk(KERN_INFO "fcoe: No FDMI support.\n");
*/
static void fcoe_ctlr_disc_stop_locked(struct fc_lport *lport)
{
+ struct fc_rport_priv *rdata;
+
mutex_lock(&lport->disc.disc_mutex);
+ list_for_each_entry_rcu(rdata, &lport->disc.rports, peers)
+ lport->tt.rport_logoff(rdata);
lport->disc.disc_callback = NULL;
mutex_unlock(&lport->disc.disc_mutex);
}
NULL,
};
-struct bus_type fcoe_bus_type;
+static struct bus_type fcoe_bus_type;
static int fcoe_bus_match(struct device *dev,
struct device_driver *drv)
kfree(fcf);
}
-struct device_type fcoe_ctlr_device_type = {
+static struct device_type fcoe_ctlr_device_type = {
.name = "fcoe_ctlr",
.groups = fcoe_ctlr_attr_groups,
.release = fcoe_ctlr_device_release,
};
-struct device_type fcoe_fcf_device_type = {
+static struct device_type fcoe_fcf_device_type = {
.name = "fcoe_fcf",
.groups = fcoe_fcf_attr_groups,
.release = fcoe_fcf_device_release,
};
-struct bus_attribute fcoe_bus_attr_group[] = {
+static struct bus_attribute fcoe_bus_attr_group[] = {
__ATTR(ctlr_create, S_IWUSR, NULL, fcoe_ctlr_create_store),
__ATTR(ctlr_destroy, S_IWUSR, NULL, fcoe_ctlr_destroy_store),
__ATTR_NULL
};
-struct bus_type fcoe_bus_type = {
+static struct bus_type fcoe_bus_type = {
.name = "fcoe",
.match = &fcoe_bus_match,
.bus_attrs = fcoe_bus_attr_group,
* fcoe_ctlr_device_flush_work() - Flush a FIP ctlr's workqueue
* @ctlr: Pointer to the FIP ctlr whose workqueue is to be flushed
*/
-void fcoe_ctlr_device_flush_work(struct fcoe_ctlr_device *ctlr)
+static void fcoe_ctlr_device_flush_work(struct fcoe_ctlr_device *ctlr)
{
if (!fcoe_ctlr_work_q(ctlr)) {
printk(KERN_ERR
* Return value:
* 1 on success / 0 already queued / < 0 for error
*/
-int fcoe_ctlr_device_queue_work(struct fcoe_ctlr_device *ctlr,
- struct work_struct *work)
+static int fcoe_ctlr_device_queue_work(struct fcoe_ctlr_device *ctlr,
+ struct work_struct *work)
{
if (unlikely(!fcoe_ctlr_work_q(ctlr))) {
printk(KERN_ERR
* fcoe_ctlr_device_flush_devloss() - Flush a FIP ctlr's devloss workqueue
* @ctlr: Pointer to FIP ctlr whose workqueue is to be flushed
*/
-void fcoe_ctlr_device_flush_devloss(struct fcoe_ctlr_device *ctlr)
+static void fcoe_ctlr_device_flush_devloss(struct fcoe_ctlr_device *ctlr)
{
if (!fcoe_ctlr_devloss_work_q(ctlr)) {
printk(KERN_ERR
* Return value:
* 1 on success / 0 already queued / < 0 for error
*/
-int fcoe_ctlr_device_queue_devloss_work(struct fcoe_ctlr_device *ctlr,
- struct delayed_work *work,
- unsigned long delay)
+static int fcoe_ctlr_device_queue_devloss_work(struct fcoe_ctlr_device *ctlr,
+ struct delayed_work *work,
+ unsigned long delay)
{
if (unlikely(!fcoe_ctlr_devloss_work_q(ctlr))) {
printk(KERN_ERR
{
struct fcoe_ctlr *fip = fcoe_ctlr_device_priv(ctlr_dev);
struct net_device *netdev = fcoe_get_netdev(fip->lp);
- struct fcoe_fc_els_lesb *fcoe_lesb;
- struct fc_els_lesb fc_lesb;
-
- __fcoe_get_lesb(fip->lp, &fc_lesb, netdev);
- fcoe_lesb = (struct fcoe_fc_els_lesb *)(&fc_lesb);
-
- ctlr_dev->lesb.lesb_link_fail =
- ntohl(fcoe_lesb->lesb_link_fail);
- ctlr_dev->lesb.lesb_vlink_fail =
- ntohl(fcoe_lesb->lesb_vlink_fail);
- ctlr_dev->lesb.lesb_miss_fka =
- ntohl(fcoe_lesb->lesb_miss_fka);
- ctlr_dev->lesb.lesb_symb_err =
- ntohl(fcoe_lesb->lesb_symb_err);
- ctlr_dev->lesb.lesb_err_block =
- ntohl(fcoe_lesb->lesb_err_block);
- ctlr_dev->lesb.lesb_fcs_error =
- ntohl(fcoe_lesb->lesb_fcs_error);
+ struct fc_els_lesb *fc_lesb;
+
+ fc_lesb = (struct fc_els_lesb *)(&ctlr_dev->lesb);
+ __fcoe_get_lesb(fip->lp, fc_lesb, netdev);
}
EXPORT_SYMBOL_GPL(fcoe_ctlr_get_lesb);
{
struct net_device *netdev = NULL;
struct fcoe_transport *ft = NULL;
- struct fcoe_ctlr_device *ctlr_dev = NULL;
int rc = 0;
int err;
goto out_putdev;
}
- LIBFCOE_TRANSPORT_DBG("transport %s %s to create fcoe on %s.\n",
- ft->name, (ctlr_dev) ? "succeeded" : "failed",
- netdev->name);
+ LIBFCOE_TRANSPORT_DBG("transport %s succeeded to create fcoe on %s.\n",
+ ft->name, netdev->name);
out_putdev:
dev_put(netdev);
* fc_exch_timer_cancel() - cancel exch timer
* @ep: The exchange whose timer to be canceled
*/
-static inline void fc_exch_timer_cancel(struct fc_exch *ep)
+static inline void fc_exch_timer_cancel(struct fc_exch *ep)
{
if (cancel_delayed_work(&ep->timeout_work)) {
FC_EXCH_DBG(ep, "Exchange timer canceled\n");
fc_exch_rctl_name(fh->fh_r_ctl));
if (cancel_delayed_work_sync(&ep->timeout_work)) {
- FC_EXCH_DBG(ep, "Exchange timer canceled\n");
+ FC_EXCH_DBG(ep, "Exchange timer canceled due to ABTS response\n");
fc_exch_release(ep); /* release from pending timer hold */
}
kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
}
+static bool
+fc_rport_compatible_roles(struct fc_lport *lport, struct fc_rport_priv *rdata)
+{
+ if (rdata->ids.roles == FC_PORT_ROLE_UNKNOWN)
+ return true;
+ if ((rdata->ids.roles & FC_PORT_ROLE_FCP_TARGET) &&
+ (lport->service_params & FCP_SPPF_INIT_FCN))
+ return true;
+ if ((rdata->ids.roles & FC_PORT_ROLE_FCP_INITIATOR) &&
+ (lport->service_params & FCP_SPPF_TARG_FCN))
+ return true;
+ return false;
+}
+
/**
* fc_rport_enter_plogi() - Send Port Login (PLOGI) request
* @rdata: The remote port to send a PLOGI to
struct fc_lport *lport = rdata->local_port;
struct fc_frame *fp;
+ if (!fc_rport_compatible_roles(lport, rdata)) {
+ FC_RPORT_DBG(rdata, "PLOGI suppressed for incompatible role\n");
+ fc_rport_state_enter(rdata, RPORT_ST_PLOGI_WAIT);
+ return;
+ }
+
FC_RPORT_DBG(rdata, "Port entered PLOGI state from %s state\n",
fc_rport_state(rdata));
rjt_data.explan = ELS_EXPL_NONE;
goto reject;
}
+ if (!fc_rport_compatible_roles(lport, rdata)) {
+ FC_RPORT_DBG(rdata, "Received PLOGI for incompatible role\n");
+ mutex_unlock(&rdata->rp_mutex);
+ rjt_data.reason = ELS_RJT_LOGIC;
+ rjt_data.explan = ELS_EXPL_NONE;
+ goto reject;
+ }
/*
* Get session payload size from incoming PLOGI.
sense, sense_handle);
}
- for (i = 0; i < ioc->sge_count && kbuff_arr[i]; i++) {
- dma_free_coherent(&instance->pdev->dev,
- kern_sge32[i].length,
- kbuff_arr[i], kern_sge32[i].phys_addr);
+ for (i = 0; i < ioc->sge_count; i++) {
+ if (kbuff_arr[i])
+ dma_free_coherent(&instance->pdev->dev,
+ kern_sge32[i].length,
+ kbuff_arr[i],
+ kern_sge32[i].phys_addr);
}
megasas_return_cmd(instance, cmd);
case 1:
/* start with logical arm */
arm = get_arm_from_strip(instance, ld, stripe, map);
- if (arm != -1UL)
+ if (arm != -1U)
arm *= 2;
break;
}
if (raid->level == 6) {
logArm = get_arm_from_strip(instance, ld, stripRow, map);
- if (logArm == -1UL)
+ if (logArm == -1U)
return FALSE;
rowMod = mega_mod64(row, SPAN_ROW_SIZE(map, ld, span));
armQ = SPAN_ROW_SIZE(map, ld, span) - 1 - rowMod;
# Kernel configuration file for the MPT3SAS
#
# This code is based on drivers/scsi/mpt3sas/Kconfig
-# Copyright (C) 2012 LSI Corporation
+# Copyright (C) 2012-2013 LSI Corporation
# (mailto:DL-MPTFusionLinux@lsi.com)
# This program is free software; you can redistribute it and/or
/*
- * Copyright (c) 2000-2012 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2.h
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.26
+ * mpi2.h Version: 02.00.29
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
* 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT.
* Added Hard Reset delay timings.
* 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
* --------------------------------------------------------------------------
*/
#define MPI2_VERSION_02_05 (0x0205)
/*Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x1A)
+#define MPI2_HEADER_VERSION_UNIT (0x1D)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
#define MPI2_REPLY_POST_HOST_INDEX_MASK (0x00FFFFFF)
#define MPI2_RPHI_MSIX_INDEX_MASK (0xFF000000)
#define MPI2_RPHI_MSIX_INDEX_SHIFT (24)
+#define MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET (0x0000030C) /*MPI v2.5 only*/
+
/*
*Defines for the HCBSize and address
/*
- * Copyright (c) 2000-2011 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_cnfg.h
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.22
+ * mpi2_cnfg.h Version: 02.00.24
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
* Added UEFIVersion field to BIOS Page 1 and defined new
* BiosOptions bits.
* Incorporating additions for MPI v2.5.
+ * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
+ * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
+ * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
+ * obsolete for MPI v2.5 and later.
+ * Added some defines for 12G SAS speeds.
* --------------------------------------------------------------------------
*/
#define MPI2_MANUFACTURING7_PAGEVERSION (0x01)
/*defines for the Flags field */
+#define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002)
#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
#define MPI2_BIOSPAGE1_PAGEVERSION (0x05)
/*values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0)
+#define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000)
+
#define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006)
#define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000)
#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002)
#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80)
#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
+#define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0)
#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80)
#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
+#define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0)
#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)
/*
- * Copyright (c) 2000-2012 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_init.h
/*
- * Copyright (c) 2000-2012 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_ioc.h
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
- * mpi2_ioc.h Version: 02.00.21
+ * mpi2_ioc.h Version: 02.00.22
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
* Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
* 11-18-11 02.00.20 Incorporating additions for MPI v2.5.
* 03-29-12 02.00.21 Added a product specific range to event values.
+ * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
+ * Added ElapsedSeconds field to
+ * MPI2_EVENT_DATA_IR_OPERATION_STATUS.
* --------------------------------------------------------------------------
*/
#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
/*IOCExceptions */
+#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200)
#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100)
#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0)
U8 RAIDOperation; /*0x04 */
U8 PercentComplete; /*0x05 */
U16 Reserved2; /*0x06 */
- U32 Resereved3; /*0x08 */
+ U32 ElapsedSeconds; /*0x08 */
} MPI2_EVENT_DATA_IR_OPERATION_STATUS,
*PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
Mpi2EventDataIrOperationStatus_t,
/*
- * Copyright (c) 2000-2012 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_raid.h
* Title: MPI Integrated RAID messages and structures
* Creation Date: April 26, 2007
*
- * mpi2_raid.h Version: 02.00.08
+ * mpi2_raid.h Version: 02.00.09
*
* Version History
* ---------------
* Added product-specific range to RAID Action values.
* 11-18-11 02.00.07 Incorporating additions for MPI v2.5.
* 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN.
+ * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR.
+ * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define.
* --------------------------------------------------------------------------
*/
U64 TotalBlocks; /*0x00 */
U64 BlocksRemaining; /*0x08 */
U32 Flags; /*0x10 */
+ U32 ElapsedSeconds; /* 0x14 */
} MPI2_RAID_VOL_INDICATOR, *PTR_MPI2_RAID_VOL_INDICATOR,
Mpi2RaidVolIndicator_t, *pMpi2RaidVolIndicator_t;
/*defines for RAID Volume Indicator Flags field */
+#define MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID (0x80000000)
#define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F)
#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000)
#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001)
/*RAID Action Reply ActionData union */
typedef union _MPI2_RAID_ACTION_REPLY_DATA {
- U32 Word[5];
+ U32 Word[6];
MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator;
U16 VolDevHandle;
U8 VolumeState;
/*
- * Copyright (c) 2000-2012 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_sas.h
/*
- * Copyright (c) 2000-2012 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_tool.h
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
- * mpi2_tool.h Version: 02.00.09
+ * mpi2_tool.h Version: 02.00.10
*
* Version History
* ---------------
* 11-18-11 02.00.08 Incorporating additions for MPI v2.5.
* 07-10-12 02.00.09 Add MPI v2.5 Toolbox Diagnostic CLI Tool Request
* message.
+ * 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
+ * it uses MPI Chain SGE as well as MPI Simple SGE.
* --------------------------------------------------------------------------
*/
U16 Reserved6; /*0x0E */
U32 DataLength; /*0x10 */
U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
- MPI2_SGE_SIMPLE_UNION SGL; /*0x70 */
+ MPI2_MPI_SGE_IO_UNION SGL; /*0x70 */
} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
*PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
Mpi2ToolboxDiagnosticCliRequest_t,
U32 Reserved5; /*0x0C */
U32 DataLength; /*0x10 */
U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH];/*0x14 */
- MPI25_SGE_IO_UNION SGL; /*0x70 */
+ MPI25_SGE_IO_UNION SGL; /* 0x70 */
} MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
*PTR_MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
Mpi25ToolboxDiagnosticCliRequest_t,
/*
- * Copyright (c) 2000-2007 LSI Corporation.
+ * Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_type.h
* for access to MPT (Message Passing Technology) firmware.
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
&ioc->chip->HostDiagnostic);
- /* don't access any registers for 50 milliseconds */
- msleep(50);
+ /*This delay allows the chip PCIe hardware time to finish reset tasks*/
+ if (sleep_flag == CAN_SLEEP)
+ msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
+ else
+ mdelay(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000);
- /* 300 second max wait */
- for (count = 0; count < 3000000 ; count++) {
+ /* Approximately 300 second max wait */
+ for (count = 0; count < (300000000 /
+ MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {
host_diagnostic = readl(&ioc->chip->HostDiagnostic);
if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
break;
- /* wait 1 msec */
+ /* Wait to pass the second read delay window */
if (sleep_flag == CAN_SLEEP)
- usleep_range(1000, 1500);
+ msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
+ / 1000);
else
- mdelay(1);
+ mdelay(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC
+ / 1000);
}
if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
* for access to MPT (Message Passing Technology) firmware.
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
#define MPT3SAS_DRIVER_NAME "mpt3sas"
#define MPT3SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver"
-#define MPT3SAS_DRIVER_VERSION "01.100.01.00"
-#define MPT3SAS_MAJOR_VERSION 1
+#define MPT3SAS_DRIVER_VERSION "02.100.00.00"
+#define MPT3SAS_MAJOR_VERSION 2
#define MPT3SAS_MINOR_VERSION 100
-#define MPT3SAS_BUILD_VERSION 1
+#define MPT3SAS_BUILD_VERSION 0
#define MPT3SAS_RELEASE_VERSION 00
/*
* This module provides common API for accessing firmware configuration pages
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* Logging Support for MPT (Message Passing Technology) based controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_debug.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* Scsi Host Layer for MPT (Message Passing Technology) based controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_scsih.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* devices while scanning is turned on due to an oops in
* scsi_sysfs_add_sdev()->add_device()->sysfs_addrm_start()
*/
- if (!ioc->is_driver_loading)
+ if (!ioc->is_driver_loading) {
mpt3sas_transport_port_remove(ioc,
sas_device->sas_address,
sas_device->sas_address_parent);
- _scsih_sas_device_remove(ioc, sas_device);
+ _scsih_sas_device_remove(ioc, sas_device);
+ }
}
}
struct MPT3SAS_DEVICE *sas_device_priv_data;
struct scsi_target *starget;
struct _raid_device *raid_device;
+ struct _sas_device *sas_device;
unsigned long flags;
sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL);
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
}
+ if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_target_priv_data->sas_address);
+ if (sas_device && (sas_device->starget == NULL)) {
+ sdev_printk(KERN_INFO, sdev,
+ "%s : sas_device->starget set to starget @ %d\n",
+ __func__, __LINE__);
+ sas_device->starget = starget;
+ }
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ }
+
return 0;
}
handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
break;
handle = le16_to_cpu(sas_device_pg0.DevHandle);
device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
&volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
break;
handle = le16_to_cpu(volume_pg1.DevHandle);
phys_disk_num))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
break;
phys_disk_num = pd_pg0.PhysDiskNum;
handle = le16_to_cpu(pd_pg0.DevHandle);
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
break;
handle = le16_to_cpu(expander_pg0.DevHandle);
MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
pr_info(MPT3SAS_FMT "\tbreak from expander scan: " \
"ioc_status(0x%04x), loginfo(0x%08x)\n",
phys_disk_num))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
pr_info(MPT3SAS_FMT "\tbreak from phys disk scan: "\
"ioc_status(0x%04x), loginfo(0x%08x)\n",
&volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
pr_info(MPT3SAS_FMT "\tbreak from volume scan: " \
"ioc_status(0x%04x), loginfo(0x%08x)\n",
handle))) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
pr_info(MPT3SAS_FMT "\tbreak from end device scan:"\
" ioc_status(0x%04x), loginfo(0x%08x)\n",
sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device);
} else if (!sas_device->starget) {
- if (!ioc->is_driver_loading)
- mpt3sas_transport_port_remove(ioc, sas_address,
+ if (!ioc->is_driver_loading) {
+ mpt3sas_transport_port_remove(ioc,
+ sas_address,
sas_address_parent);
- _scsih_sas_device_remove(ioc, sas_device);
+ _scsih_sas_device_remove(ioc, sas_device);
+ }
}
}
}
* oops in scsi_sysfs_add_sdev()->add_device()->
* sysfs_addrm_start()
*/
- if (!ioc->is_driver_loading)
+ if (!ioc->is_driver_loading) {
mpt3sas_transport_port_remove(ioc,
sas_device->sas_address,
sas_device->sas_address_parent);
- list_del(&sas_device->list);
- kfree(sas_device);
- continue;
+ list_del(&sas_device->list);
+ kfree(sas_device);
+ continue;
+ }
}
spin_lock_irqsave(&ioc->sas_device_lock, flags);
* SAS Transport Layer for MPT (Message Passing Technology) based controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_transport.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* (Message Passing Technology) based controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
- * Copyright (C) 2012 LSI Corporation
+ * Copyright (C) 2012-2013 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
{
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
struct pm8001_hba_info *pm8001_ha;
- int i , pos;
+ int i;
u32 device_state;
pm8001_ha = sha->lldd_ha;
flush_workqueue(pm8001_wq);
scsi_block_requests(pm8001_ha->shost);
- pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pos == 0) {
- printk(KERN_ERR " PCI PM not supported\n");
+ if (!pdev->pm_cap) {
+ dev_err(&pdev->dev, " PCI PM not supported\n");
return -ENODEV;
}
PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
if (unlikely(pci_channel_offline(ha->pdev)))
goto done;
+ if (qla2x00_reset_active(vha))
+ goto done;
+
stats = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &stats_dma);
if (stats == NULL) {
ql_log(ql_log_warn, vha, 0x707d,
if (IS_FWI2_CAPABLE(ha)) {
rval = qla24xx_get_isp_stats(base_vha, stats, stats_dma);
} else if (atomic_read(&base_vha->loop_state) == LOOP_READY &&
- !qla2x00_reset_active(vha) && !ha->dpc_active) {
+ !ha->dpc_active) {
/* Must be in a 'READY' state for statistics retrieval. */
rval = qla2x00_get_link_status(base_vha, base_vha->loop_id,
stats, stats_dma);
type = "FC_BSG_HST_ELS_NOLOGIN";
}
+ if (!vha->flags.online) {
+ ql_log(ql_log_warn, vha, 0x7005, "Host not online.\n");
+ rval = -EIO;
+ goto done;
+ }
+
/* pass through is supported only for ISP 4Gb or higher */
if (!IS_FWI2_CAPABLE(ha)) {
ql_dbg(ql_dbg_user, vha, 0x7001,
NPH_FABRIC_CONTROLLER : NPH_F_PORT;
}
- if (!vha->flags.online) {
- ql_log(ql_log_warn, vha, 0x7005, "Host not online.\n");
- rval = -EIO;
- goto done;
- }
-
req_sg_cnt =
dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list,
bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
goto done_free_fcport;
done_free_fcport:
- if (bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN)
+ if (bsg_job->request->msgcode == FC_BSG_RPT_ELS)
kfree(fcport);
done:
return rval;
return -EINVAL;
}
- ql84_mgmt = (struct qla_bsg_a84_mgmt *)((char *)bsg_job->request +
- sizeof(struct fc_bsg_request));
- if (!ql84_mgmt) {
- ql_log(ql_log_warn, vha, 0x703b,
- "MGMT header not provided, exiting.\n");
- return -EINVAL;
- }
-
mn = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &mn_dma);
if (!mn) {
ql_log(ql_log_warn, vha, 0x703c,
memset(mn, 0, sizeof(struct access_chip_84xx));
mn->entry_type = ACCESS_CHIP_IOCB_TYPE;
mn->entry_count = 1;
-
+ ql84_mgmt = (void *)bsg_job->request + sizeof(struct fc_bsg_request);
switch (ql84_mgmt->mgmt.cmd) {
case QLA84_MGMT_READ_MEM:
case QLA84_MGMT_GET_INFO:
return -EINVAL;
}
- port_param = (struct qla_port_param *)((char *)bsg_job->request +
- sizeof(struct fc_bsg_request));
- if (!port_param) {
- ql_log(ql_log_warn, vha, 0x7047,
- "port_param header not provided.\n");
- return -EINVAL;
- }
-
+ port_param = (void *)bsg_job->request + sizeof(struct fc_bsg_request);
if (port_param->fc_scsi_addr.dest_type != EXT_DEF_TYPE_WWPN) {
ql_log(ql_log_warn, vha, 0x7048,
"Invalid destination type.\n");
(sp->type == SRB_ELS_CMD_HST) ||
(sp->type == SRB_FXIOCB_BCMD))
&& (sp->u.bsg_job == bsg_job)) {
+ req->outstanding_cmds[cnt] = NULL;
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (ha->isp_ops->abort_command(sp)) {
ql_log(ql_log_warn, vha, 0x7089,
done:
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- if (bsg_job->request->msgcode == FC_BSG_HST_CT)
- kfree(sp->fcport);
- qla2x00_rel_sp(vha, sp);
+ sp->free(vha, sp);
return 0;
}
* | Level | Last Value Used | Holes |
* ----------------------------------------------------------------------
* | Module Init and Probe | 0x014f | 0x4b,0xba,0xfa |
- * | Mailbox commands | 0x1179 | 0x111a-0x111b |
+ * | Mailbox commands | 0x117a | 0x111a-0x111b |
* | | | 0x1155-0x1158 |
* | Device Discovery | 0x2095 | 0x2020-0x2022, |
+ * | | | 0x2011-0x2012, |
* | | | 0x2016 |
* | Queue Command and IO tracing | 0x3058 | 0x3006-0x300b |
* | | | 0x3027-0x3028 |
* | | | 0x70a5,0x70a6, |
* | | | 0x70a8,0x70ab, |
* | | | 0x70ad-0x70ae, |
- * | | | 0x70d1-0x70da |
+ * | | | 0x70d1-0x70da, |
+ * | | | 0x7047,0x703b |
* | Task Management | 0x803c | 0x8025-0x8026 |
* | | | 0x800b,0x8039 |
* | AER/EEH | 0x9011 | |
nxt = qla2xxx_copy_queues(ha, nxt);
- nxt = qla24xx_copy_eft(ha, nxt);
+ qla24xx_copy_eft(ha, nxt);
/* Chain entries -- started with MQ. */
nxt_chain = qla25xx_copy_fce(ha, nxt_chain, &last_chain);
nxt = qla2xxx_copy_queues(ha, nxt);
- nxt = qla24xx_copy_eft(ha, nxt);
+ qla24xx_copy_eft(ha, nxt);
/* Chain entries -- started with MQ. */
nxt_chain = qla25xx_copy_fce(ha, nxt_chain, &last_chain);
copy_queue:
nxt = qla2xxx_copy_queues(ha, nxt);
- nxt = qla24xx_copy_eft(ha, nxt);
+ qla24xx_copy_eft(ha, nxt);
/* Chain entries -- started with MQ. */
nxt_chain = qla25xx_copy_fce(ha, nxt_chain, &last_chain);
uint32_t lun;
uint32_t data;
struct completion comp;
- uint32_t comp_status;
+ __le16 comp_status;
} tmf;
struct {
#define SRB_FXDISC_REQ_DMA_VALID BIT_0
void *rsp_addr;
dma_addr_t req_dma_handle;
dma_addr_t rsp_dma_handle;
- uint32_t adapter_id;
- uint32_t adapter_id_hi;
- uint32_t req_func_type;
- uint32_t req_data;
- uint32_t req_data_extra;
- uint32_t result;
- uint32_t seq_number;
- uint32_t fw_flags;
+ __le32 adapter_id;
+ __le32 adapter_id_hi;
+ __le16 req_func_type;
+ __le32 req_data;
+ __le32 req_data_extra;
+ __le32 result;
+ __le32 seq_number;
+ __le16 fw_flags;
struct completion fxiocb_comp;
- uint32_t reserved_0;
+ __le32 reserved_0;
uint8_t reserved_1;
} fxiocb;
struct {
uint32_t cmd_hndl;
- uint32_t comp_status;
+ __le16 comp_status;
struct completion comp;
} abt;
} u;
struct init_cb_fx {
uint16_t version;
uint16_t reserved_1[13];
- uint16_t request_q_outpointer;
- uint16_t response_q_inpointer;
+ __le16 request_q_outpointer;
+ __le16 response_q_inpointer;
uint16_t reserved_2[2];
- uint16_t response_q_length;
- uint16_t request_q_length;
+ __le16 response_q_length;
+ __le16 request_q_length;
uint16_t reserved_3[2];
- uint32_t request_q_address[2];
- uint32_t response_q_address[2];
+ __le32 request_q_address[2];
+ __le32 response_q_address[2];
uint16_t reserved_4[4];
uint8_t response_q_msivec;
uint8_t reserved_5[19];
extern int qlafx00_fw_ready(scsi_qla_host_t *);
extern int qlafx00_configure_devices(scsi_qla_host_t *);
extern int qlafx00_reset_initialize(scsi_qla_host_t *);
-extern int qlafx00_fx_disc(scsi_qla_host_t *, fc_port_t *, uint8_t);
+extern int qlafx00_fx_disc(scsi_qla_host_t *, fc_port_t *, uint16_t);
extern int qlafx00_process_aen(struct scsi_qla_host *, struct qla_work_evt *);
extern int qlafx00_post_aenfx_work(struct scsi_qla_host *, uint32_t,
uint32_t *, int);
* Returns a pointer to the intitialized @ct_req.
*/
static inline struct ct_sns_req *
-qla2x00_prep_ct_req(struct ct_sns_req *ct_req, uint16_t cmd, uint16_t rsp_size)
+qla2x00_prep_ct_req(struct ct_sns_pkt *p, uint16_t cmd, uint16_t rsp_size)
{
- memset(ct_req, 0, sizeof(struct ct_sns_pkt));
+ memset(p, 0, sizeof(struct ct_sns_pkt));
- ct_req->header.revision = 0x01;
- ct_req->header.gs_type = 0xFC;
- ct_req->header.gs_subtype = 0x02;
- ct_req->command = cpu_to_be16(cmd);
- ct_req->max_rsp_size = cpu_to_be16((rsp_size - 16) / 4);
+ p->p.req.header.revision = 0x01;
+ p->p.req.header.gs_type = 0xFC;
+ p->p.req.header.gs_subtype = 0x02;
+ p->p.req.command = cpu_to_be16(cmd);
+ p->p.req.max_rsp_size = cpu_to_be16((rsp_size - 16) / 4);
- return (ct_req);
+ return &p->p.req;
}
static int
GA_NXT_RSP_SIZE);
/* Prepare CT request */
- ct_req = qla2x00_prep_ct_req(&ha->ct_sns->p.req, GA_NXT_CMD,
+ ct_req = qla2x00_prep_ct_req(ha->ct_sns, GA_NXT_CMD,
GA_NXT_RSP_SIZE);
ct_rsp = &ha->ct_sns->p.rsp;
gid_pt_rsp_size);
/* Prepare CT request */
- ct_req = qla2x00_prep_ct_req(&ha->ct_sns->p.req, GID_PT_CMD,
- gid_pt_rsp_size);
+ ct_req = qla2x00_prep_ct_req(ha->ct_sns, GID_PT_CMD, gid_pt_rsp_size);
ct_rsp = &ha->ct_sns->p.rsp;
/* Prepare CT arguments -- port_type */
GPN_ID_RSP_SIZE);
/* Prepare CT request */
- ct_req = qla2x00_prep_ct_req(&ha->ct_sns->p.req, GPN_ID_CMD,
+ ct_req = qla2x00_prep_ct_req(ha->ct_sns, GPN_ID_CMD,
GPN_ID_RSP_SIZE);
ct_rsp = &ha->ct_sns->p.rsp;
GNN_ID_RSP_SIZE);
/* Prepare CT request */
- ct_req = qla2x00_prep_ct_req(&ha->ct_sns->p.req, GNN_ID_CMD,
+ ct_req = qla2x00_prep_ct_req(ha->ct_sns, GNN_ID_CMD,
GNN_ID_RSP_SIZE);
ct_rsp = &ha->ct_sns->p.rsp;
RFT_ID_RSP_SIZE);
/* Prepare CT request */
- ct_req = qla2x00_prep_ct_req(&ha->ct_sns->p.req, RFT_ID_CMD,
+ ct_req = qla2x00_prep_ct_req(ha->ct_sns, RFT_ID_CMD,
RFT_ID_RSP_SIZE);
ct_rsp = &ha->ct_sns->p.rsp;
RFF_ID_RSP_SIZE);
/* Prepare CT request */
- ct_req = qla2x00_prep_ct_req(&ha->ct_sns->p.req, RFF_ID_CMD,
+ ct_req = qla2x00_prep_ct_req(ha->ct_sns, RFF_ID_CMD,
RFF_ID_RSP_SIZE);
ct_rsp = &ha->ct_sns->p.rsp;
RNN_ID_RSP_SIZE);
/* Prepare CT request */
- ct_req = qla2x00_prep_ct_req(&ha->ct_sns->p.req, RNN_ID_CMD,
- RNN_ID_RSP_SIZE);
+ ct_req = qla2x00_prep_ct_req(ha->ct_sns, RNN_ID_CMD, RNN_ID_RSP_SIZE);
ct_rsp = &ha->ct_sns->p.rsp;
/* Prepare CT arguments -- port_id, node_name */
ms_pkt = ha->isp_ops->prep_ms_iocb(vha, 0, RSNN_NN_RSP_SIZE);
/* Prepare CT request */
- ct_req = qla2x00_prep_ct_req(&ha->ct_sns->p.req, RSNN_NN_CMD,
+ ct_req = qla2x00_prep_ct_req(ha->ct_sns, RSNN_NN_CMD,
RSNN_NN_RSP_SIZE);
ct_rsp = &ha->ct_sns->p.rsp;
* Returns a pointer to the intitialized @ct_req.
*/
static inline struct ct_sns_req *
-qla2x00_prep_ct_fdmi_req(struct ct_sns_req *ct_req, uint16_t cmd,
+qla2x00_prep_ct_fdmi_req(struct ct_sns_pkt *p, uint16_t cmd,
uint16_t rsp_size)
{
- memset(ct_req, 0, sizeof(struct ct_sns_pkt));
+ memset(p, 0, sizeof(struct ct_sns_pkt));
- ct_req->header.revision = 0x01;
- ct_req->header.gs_type = 0xFA;
- ct_req->header.gs_subtype = 0x10;
- ct_req->command = cpu_to_be16(cmd);
- ct_req->max_rsp_size = cpu_to_be16((rsp_size - 16) / 4);
+ p->p.req.header.revision = 0x01;
+ p->p.req.header.gs_type = 0xFA;
+ p->p.req.header.gs_subtype = 0x10;
+ p->p.req.command = cpu_to_be16(cmd);
+ p->p.req.max_rsp_size = cpu_to_be16((rsp_size - 16) / 4);
- return ct_req;
+ return &p->p.req;
}
/**
ms_pkt = ha->isp_ops->prep_ms_fdmi_iocb(vha, 0, RHBA_RSP_SIZE);
/* Prepare CT request */
- ct_req = qla2x00_prep_ct_fdmi_req(&ha->ct_sns->p.req, RHBA_CMD,
- RHBA_RSP_SIZE);
+ ct_req = qla2x00_prep_ct_fdmi_req(ha->ct_sns, RHBA_CMD, RHBA_RSP_SIZE);
ct_rsp = &ha->ct_sns->p.rsp;
/* Prepare FDMI command arguments -- attribute block, attributes. */
/* Model description. */
eiter = (struct ct_fdmi_hba_attr *) (entries + size);
eiter->type = __constant_cpu_to_be16(FDMI_HBA_MODEL_DESCRIPTION);
- if (ha->model_desc)
- strncpy(eiter->a.model_desc, ha->model_desc, 80);
+ strncpy(eiter->a.model_desc, ha->model_desc, 80);
alen = strlen(eiter->a.model_desc);
alen += (alen & 3) ? (4 - (alen & 3)) : 4;
eiter->len = cpu_to_be16(4 + alen);
DHBA_RSP_SIZE);
/* Prepare CT request */
- ct_req = qla2x00_prep_ct_fdmi_req(&ha->ct_sns->p.req, DHBA_CMD,
- DHBA_RSP_SIZE);
+ ct_req = qla2x00_prep_ct_fdmi_req(ha->ct_sns, DHBA_CMD, DHBA_RSP_SIZE);
ct_rsp = &ha->ct_sns->p.rsp;
/* Prepare FDMI command arguments -- portname. */
ms_pkt = ha->isp_ops->prep_ms_fdmi_iocb(vha, 0, RPA_RSP_SIZE);
/* Prepare CT request */
- ct_req = qla2x00_prep_ct_fdmi_req(&ha->ct_sns->p.req, RPA_CMD,
- RPA_RSP_SIZE);
+ ct_req = qla2x00_prep_ct_fdmi_req(ha->ct_sns, RPA_CMD, RPA_RSP_SIZE);
ct_rsp = &ha->ct_sns->p.rsp;
/* Prepare FDMI command arguments -- attribute block, attributes. */
GFPN_ID_RSP_SIZE);
/* Prepare CT request */
- ct_req = qla2x00_prep_ct_req(&ha->ct_sns->p.req, GFPN_ID_CMD,
+ ct_req = qla2x00_prep_ct_req(ha->ct_sns, GFPN_ID_CMD,
GFPN_ID_RSP_SIZE);
ct_rsp = &ha->ct_sns->p.rsp;
static inline struct ct_sns_req *
-qla24xx_prep_ct_fm_req(struct ct_sns_req *ct_req, uint16_t cmd,
+qla24xx_prep_ct_fm_req(struct ct_sns_pkt *p, uint16_t cmd,
uint16_t rsp_size)
{
- memset(ct_req, 0, sizeof(struct ct_sns_pkt));
+ memset(p, 0, sizeof(struct ct_sns_pkt));
- ct_req->header.revision = 0x01;
- ct_req->header.gs_type = 0xFA;
- ct_req->header.gs_subtype = 0x01;
- ct_req->command = cpu_to_be16(cmd);
- ct_req->max_rsp_size = cpu_to_be16((rsp_size - 16) / 4);
+ p->p.req.header.revision = 0x01;
+ p->p.req.header.gs_type = 0xFA;
+ p->p.req.header.gs_subtype = 0x01;
+ p->p.req.command = cpu_to_be16(cmd);
+ p->p.req.max_rsp_size = cpu_to_be16((rsp_size - 16) / 4);
- return ct_req;
+ return &p->p.req;
}
/**
GPSC_RSP_SIZE);
/* Prepare CT request */
- ct_req = qla24xx_prep_ct_fm_req(&ha->ct_sns->p.req,
- GPSC_CMD, GPSC_RSP_SIZE);
+ ct_req = qla24xx_prep_ct_fm_req(ha->ct_sns, GPSC_CMD,
+ GPSC_RSP_SIZE);
ct_rsp = &ha->ct_sns->p.rsp;
/* Prepare CT arguments -- port_name */
GFF_ID_RSP_SIZE);
/* Prepare CT request */
- ct_req = qla2x00_prep_ct_req(&ha->ct_sns->p.req, GFF_ID_CMD,
+ ct_req = qla2x00_prep_ct_req(ha->ct_sns, GFF_ID_CMD,
GFF_ID_RSP_SIZE);
ct_rsp = &ha->ct_sns->p.rsp;
"Topology - %s, Host Loop address 0x%x.\n",
connect_type, vha->loop_id);
- if (rval) {
- ql_log(ql_log_warn, vha, 0x2011,
- "%s FAILED\n", __func__);
- } else {
- ql_dbg(ql_dbg_disc, vha, 0x2012,
- "%s success\n", __func__);
- }
-
return(rval);
}
host_to_adap(uint8_t *src, uint8_t *dst, uint32_t bsize)
{
uint32_t *isrc = (uint32_t *) src;
- uint32_t *odest = (uint32_t *) dst;
+ __le32 *odest = (__le32 *) dst;
uint32_t iter = bsize >> 2;
for (; iter ; iter--)
uint32_t *cur_dsd, *fcp_dl;
scsi_qla_host_t *vha;
struct scsi_cmnd *cmd;
- struct scatterlist *cur_seg;
int sgc;
uint32_t total_bytes = 0;
uint32_t data_bytes;
if (bundling && tot_prot_dsds) {
/* Walks dif segments */
- cur_seg = scsi_prot_sglist(cmd);
cmd_pkt->control_flags |=
__constant_cpu_to_le16(CF_DIF_SEG_DESCR_ENABLE);
cur_dsd = (uint32_t *) &crc_ctx_pkt->u.bundling.dif_address;
pkt = req->ring_ptr;
memset(pkt, 0, REQUEST_ENTRY_SIZE);
if (IS_QLAFX00(ha)) {
- WRT_REG_BYTE(&pkt->entry_count, req_cnt);
- WRT_REG_WORD(&pkt->handle, handle);
+ WRT_REG_BYTE((void __iomem *)&pkt->entry_count, req_cnt);
+ WRT_REG_WORD((void __iomem *)&pkt->handle, handle);
} else {
pkt->entry_count = req_cnt;
pkt->handle = handle;
if (rval == QLA_SUCCESS)
goto next_test;
+ rval = QLA_SUCCESS;
WRT_REG_DWORD(®->iobase_window, 0x0003);
for (cnt = 100; (RD_REG_DWORD(®->iobase_window) & BIT_0) == 0 &&
rval == QLA_SUCCESS; cnt--) {
WRT_REG_WORD(®->isp.hccr, HCCR_SET_HOST_INT);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- wait_for_completion_timeout(&ha->mbx_intr_comp, mcp->tov * HZ);
-
+ if (!wait_for_completion_timeout(&ha->mbx_intr_comp,
+ mcp->tov * HZ)) {
+ ql_dbg(ql_dbg_mbx, vha, 0x117a,
+ "cmd=%x Timeout.\n", command);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ }
} else {
ql_dbg(ql_dbg_mbx, vha, 0x1011,
"Cmd=%x Polling Mode.\n", command);
/*
* Attempt to capture a firmware dump for further analysis
- * of the current firmware state
+ * of the current firmware state. We do not need to do this
+ * if we are intentionally generating a dump.
*/
- ha->isp_ops->fw_dump(vha, 0);
+ if (mcp->mb[0] != MBC_GEN_SYSTEM_ERROR)
+ ha->isp_ops->fw_dump(vha, 0);
rval = QLA_FUNCTION_TIMEOUT;
}
srb_t *sp = (srb_t *)data;
struct srb_iocb *tmf = &sp->u.iocb_cmd;
- tmf->u.tmf.comp_status = CS_TIMEOUT;
+ tmf->u.tmf.comp_status = cpu_to_le16((uint16_t)CS_TIMEOUT);
complete(&tmf->u.tmf.comp);
}
pkt = rsp->ring_ptr;
for (cnt = 0; cnt < rsp->length; cnt++) {
pkt->signature = RESPONSE_PROCESSED;
- WRT_REG_DWORD(&pkt->signature, RESPONSE_PROCESSED);
+ WRT_REG_DWORD((void __iomem *)&pkt->signature,
+ RESPONSE_PROCESSED);
pkt++;
}
}
}
int
-qlafx00_fx_disc(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t fx_type)
+qlafx00_fx_disc(scsi_qla_host_t *vha, fc_port_t *fcport, uint16_t fx_type)
{
srb_t *sp;
struct srb_iocb *fdisc;
fdisc->u.fxiocb.flags =
SRB_FXDISC_RESP_DMA_VALID | SRB_FXDISC_REQ_DWRD_VALID;
fdisc->u.fxiocb.rsp_len = QLAFX00_PORT_DATA_INFO;
- fdisc->u.fxiocb.req_data = fcport->port_id;
+ fdisc->u.fxiocb.req_data = cpu_to_le32(fcport->port_id);
break;
case FXDISC_GET_TGT_NODE_INFO:
fdisc->u.fxiocb.flags =
SRB_FXDISC_RESP_DMA_VALID | SRB_FXDISC_REQ_DWRD_VALID;
fdisc->u.fxiocb.rsp_len = QLAFX00_TGT_NODE_INFO;
- fdisc->u.fxiocb.req_data = fcport->tgt_id;
+ fdisc->u.fxiocb.req_data = cpu_to_le32(fcport->tgt_id);
break;
case FXDISC_GET_TGT_NODE_LIST:
fdisc->u.fxiocb.flags =
sp->name = "fxdisc";
qla2x00_init_timer(sp, FXDISC_TIMEOUT);
fdisc->timeout = qla2x00_fxdisc_iocb_timeout;
- fdisc->u.fxiocb.req_func_type = fx_type;
+ fdisc->u.fxiocb.req_func_type = cpu_to_le16(fx_type);
sp->done = qla2x00_fxdisc_sp_done;
rval = qla2x00_start_sp(sp);
(uint8_t *)pinfo, 16);
memcpy(vha->hw->gid_list, pinfo, QLAFX00_TGT_NODE_LIST_SIZE);
}
- rval = fdisc->u.fxiocb.result;
+ rval = le32_to_cpu(fdisc->u.fxiocb.result);
done_unmap_dma:
if (fdisc->u.fxiocb.rsp_addr)
srb_t *sp = (srb_t *)data;
struct srb_iocb *abt = &sp->u.iocb_cmd;
- abt->u.abt.comp_status = CS_TIMEOUT;
+ abt->u.abt.comp_status = cpu_to_le16((uint16_t)CS_TIMEOUT);
complete(&abt->u.abt.comp);
}
static void
qlafx00_tm_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
struct tsk_mgmt_entry_fx00 *pkt, srb_t *sp,
- uint16_t sstatus, uint16_t cpstatus)
+ __le16 sstatus, __le16 cpstatus)
{
struct srb_iocb *tmf;
tmf = &sp->u.iocb_cmd;
- if (cpstatus != CS_COMPLETE ||
- (sstatus & SS_RESPONSE_INFO_LEN_VALID))
- cpstatus = CS_INCOMPLETE;
+ if (cpstatus != cpu_to_le16((uint16_t)CS_COMPLETE) ||
+ (sstatus & cpu_to_le16((uint16_t)SS_RESPONSE_INFO_LEN_VALID)))
+ cpstatus = cpu_to_le16((uint16_t)CS_INCOMPLETE);
tmf->u.tmf.comp_status = cpstatus;
sp->done(vha, sp, 0);
}
return;
abt = &sp->u.iocb_cmd;
- abt->u.abt.comp_status = le32_to_cpu(pkt->tgt_id_sts);
+ abt->u.abt.comp_status = pkt->tgt_id_sts;
sp->done(vha, sp, 0);
}
if (sp->type == SRB_FXIOCB_DCMD) {
iocb_job = &sp->u.iocb_cmd;
- iocb_job->u.fxiocb.seq_number = le32_to_cpu(pkt->seq_no);
- iocb_job->u.fxiocb.fw_flags = le32_to_cpu(pkt->fw_iotcl_flags);
- iocb_job->u.fxiocb.result = le32_to_cpu(pkt->status);
+ iocb_job->u.fxiocb.seq_number = pkt->seq_no;
+ iocb_job->u.fxiocb.fw_flags = pkt->fw_iotcl_flags;
+ iocb_job->u.fxiocb.result = pkt->status;
if (iocb_job->u.fxiocb.flags & SRB_FXDISC_RSP_DWRD_VALID)
iocb_job->u.fxiocb.req_data =
- le32_to_cpu(pkt->dataword_r);
+ pkt->dataword_r;
} else {
bsg_job = sp->u.bsg_job;
fc_port_t *fcport;
struct scsi_cmnd *cp;
struct sts_entry_fx00 *sts;
- uint16_t comp_status;
- uint16_t scsi_status;
+ __le16 comp_status;
+ __le16 scsi_status;
uint16_t ox_id;
- uint8_t lscsi_status;
+ __le16 lscsi_status;
int32_t resid;
uint32_t sense_len, par_sense_len, rsp_info_len, resid_len,
fw_resid_len;
sts = (struct sts_entry_fx00 *) pkt;
- comp_status = le16_to_cpu(sts->comp_status);
- scsi_status = le16_to_cpu(sts->scsi_status) & SS_MASK;
+ comp_status = sts->comp_status;
+ scsi_status = sts->scsi_status & cpu_to_le16((uint16_t)SS_MASK);
hindex = sts->handle;
handle = LSW(hindex);
return;
}
- lscsi_status = scsi_status & STATUS_MASK;
+ lscsi_status = scsi_status & cpu_to_le16((uint16_t)STATUS_MASK);
fcport = sp->fcport;
ox_id = 0;
sense_len = par_sense_len = rsp_info_len = resid_len =
fw_resid_len = 0;
- if (scsi_status & SS_SENSE_LEN_VALID)
- sense_len = le32_to_cpu(sts->sense_len);
- if (scsi_status & (SS_RESIDUAL_UNDER | SS_RESIDUAL_OVER))
+ if (scsi_status & cpu_to_le16((uint16_t)SS_SENSE_LEN_VALID))
+ sense_len = sts->sense_len;
+ if (scsi_status & cpu_to_le16(((uint16_t)SS_RESIDUAL_UNDER
+ | (uint16_t)SS_RESIDUAL_OVER)))
resid_len = le32_to_cpu(sts->residual_len);
- if (comp_status == CS_DATA_UNDERRUN)
+ if (comp_status == cpu_to_le16((uint16_t)CS_DATA_UNDERRUN))
fw_resid_len = le32_to_cpu(sts->residual_len);
rsp_info = sense_data = sts->data;
par_sense_len = sizeof(sts->data);
/* Check for overrun. */
if (comp_status == CS_COMPLETE &&
- scsi_status & SS_RESIDUAL_OVER)
- comp_status = CS_DATA_OVERRUN;
+ scsi_status & cpu_to_le16((uint16_t)SS_RESIDUAL_OVER))
+ comp_status = cpu_to_le16((uint16_t)CS_DATA_OVERRUN);
/*
* Based on Host and scsi status generate status code for Linux
*/
- switch (comp_status) {
+ switch (le16_to_cpu(comp_status)) {
case CS_COMPLETE:
case CS_QUEUE_FULL:
if (scsi_status == 0) {
res = DID_OK << 16;
break;
}
- if (scsi_status & (SS_RESIDUAL_UNDER | SS_RESIDUAL_OVER)) {
+ if (scsi_status & cpu_to_le16(((uint16_t)SS_RESIDUAL_UNDER
+ | (uint16_t)SS_RESIDUAL_OVER))) {
resid = resid_len;
scsi_set_resid(cp, resid);
break;
}
}
- res = DID_OK << 16 | lscsi_status;
+ res = DID_OK << 16 | le16_to_cpu(lscsi_status);
- if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
+ if (lscsi_status ==
+ cpu_to_le16((uint16_t)SAM_STAT_TASK_SET_FULL)) {
ql_dbg(ql_dbg_io, fcport->vha, 0x3051,
"QUEUE FULL detected.\n");
break;
}
logit = 0;
- if (lscsi_status != SS_CHECK_CONDITION)
+ if (lscsi_status != cpu_to_le16((uint16_t)SS_CHECK_CONDITION))
break;
memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
- if (!(scsi_status & SS_SENSE_LEN_VALID))
+ if (!(scsi_status & cpu_to_le16((uint16_t)SS_SENSE_LEN_VALID)))
break;
qlafx00_handle_sense(sp, sense_data, par_sense_len, sense_len,
else
resid = resid_len;
scsi_set_resid(cp, resid);
- if (scsi_status & SS_RESIDUAL_UNDER) {
+ if (scsi_status & cpu_to_le16((uint16_t)SS_RESIDUAL_UNDER)) {
if ((IS_FWI2_CAPABLE(ha) || IS_QLAFX00(ha))
&& fw_resid_len != resid_len) {
ql_dbg(ql_dbg_io, fcport->vha, 0x3052,
"(0x%x of 0x%x bytes).\n",
resid, scsi_bufflen(cp));
- res = DID_ERROR << 16 | lscsi_status;
+ res = DID_ERROR << 16 |
+ le16_to_cpu(lscsi_status);
goto check_scsi_status;
}
res = DID_ERROR << 16;
break;
}
- } else if (lscsi_status != SAM_STAT_TASK_SET_FULL &&
- lscsi_status != SAM_STAT_BUSY) {
+ } else if (lscsi_status !=
+ cpu_to_le16((uint16_t)SAM_STAT_TASK_SET_FULL) &&
+ lscsi_status != cpu_to_le16((uint16_t)SAM_STAT_BUSY)) {
/*
* scsi status of task set and busy are considered
* to be task not completed.
"of 0x%x bytes).\n", resid,
scsi_bufflen(cp));
- res = DID_ERROR << 16 | lscsi_status;
+ res = DID_ERROR << 16 | le16_to_cpu(lscsi_status);
goto check_scsi_status;
} else {
ql_dbg(ql_dbg_io, fcport->vha, 0x3055,
scsi_status, lscsi_status);
}
- res = DID_OK << 16 | lscsi_status;
+ res = DID_OK << 16 | le16_to_cpu(lscsi_status);
logit = 0;
check_scsi_status:
* Status.
*/
if (lscsi_status != 0) {
- if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
+ if (lscsi_status ==
+ cpu_to_le16((uint16_t)SAM_STAT_TASK_SET_FULL)) {
ql_dbg(ql_dbg_io, fcport->vha, 0x3056,
"QUEUE FULL detected.\n");
logit = 1;
break;
}
- if (lscsi_status != SS_CHECK_CONDITION)
+ if (lscsi_status !=
+ cpu_to_le16((uint16_t)SS_CHECK_CONDITION))
break;
memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
- if (!(scsi_status & SS_SENSE_LEN_VALID))
+ if (!(scsi_status &
+ cpu_to_le16((uint16_t)SS_SENSE_LEN_VALID)))
break;
qlafx00_handle_sense(sp, sense_data, par_sense_len,
uint32_t handle, hindex, handle_count, i;
uint16_t que;
struct req_que *req;
- uint32_t *handle_ptr;
+ __le32 *handle_ptr;
stsmfx = (struct multi_sts_entry_fx00 *) pkt;
return;
}
- handle_ptr = (uint32_t *) &stsmfx->handles[0];
+ handle_ptr = &stsmfx->handles[0];
for (i = 0; i < handle_count; i++) {
hindex = le32_to_cpu(*handle_ptr);
if (!vha->flags.online)
return;
- while (RD_REG_DWORD(&(rsp->ring_ptr->signature)) !=
+ while (RD_REG_DWORD((void __iomem *)&(rsp->ring_ptr->signature)) !=
RESPONSE_PROCESSED) {
lptr = rsp->ring_ptr;
- memcpy_fromio(rsp->rsp_pkt, lptr, sizeof(rsp->rsp_pkt));
+ memcpy_fromio(rsp->rsp_pkt, (void __iomem *)lptr,
+ sizeof(rsp->rsp_pkt));
pkt = (struct sts_entry_fx00 *)rsp->rsp_pkt;
rsp->ring_index++;
break;
}
next_iter:
- WRT_REG_DWORD(&lptr->signature, RESPONSE_PROCESSED);
+ WRT_REG_DWORD((void __iomem *)&lptr->signature,
+ RESPONSE_PROCESSED);
wmb();
}
cont_pkt = (cont_a64_entry_t *)req->ring_ptr;
/* Load packet defaults. */
- *((uint32_t *)(&lcont_pkt->entry_type)) =
- __constant_cpu_to_le32(CONTINUE_A64_TYPE_FX00);
+ lcont_pkt->entry_type = CONTINUE_A64_TYPE_FX00;
return cont_pkt;
}
uint16_t tot_dsds, struct cmd_type_7_fx00 *lcmd_pkt)
{
uint16_t avail_dsds;
- uint32_t *cur_dsd;
+ __le32 *cur_dsd;
scsi_qla_host_t *vha;
struct scsi_cmnd *cmd;
struct scatterlist *sg;
cont_pkt = NULL;
/* Update entry type to indicate Command Type 3 IOCB */
- *((uint32_t *)(&lcmd_pkt->entry_type)) =
- __constant_cpu_to_le32(FX00_COMMAND_TYPE_7);
+ lcmd_pkt->entry_type = FX00_COMMAND_TYPE_7;
/* No data transfer */
if (!scsi_bufflen(cmd) || cmd->sc_data_direction == DMA_NONE) {
/* One DSD is available in the Command Type 3 IOCB */
avail_dsds = 1;
- cur_dsd = (uint32_t *)&lcmd_pkt->dseg_0_address;
+ cur_dsd = (__le32 *)&lcmd_pkt->dseg_0_address;
/* Load data segments */
scsi_for_each_sg(cmd, sg, tot_dsds, i) {
memset(&lcont_pkt, 0, REQUEST_ENTRY_SIZE);
cont_pkt =
qlafx00_prep_cont_type1_iocb(req, &lcont_pkt);
- cur_dsd = (uint32_t *)lcont_pkt.dseg_0_address;
+ cur_dsd = (__le32 *)lcont_pkt.dseg_0_address;
avail_dsds = 5;
cont = 1;
}
tm_iocb.timeout = cpu_to_le16(qla2x00_get_async_timeout(vha) + 2);
tm_iocb.tgt_id = cpu_to_le16(sp->fcport->tgt_id);
tm_iocb.control_flags = cpu_to_le32(fxio->u.tmf.flags);
- if (tm_iocb.control_flags == TCF_LUN_RESET) {
+ if (tm_iocb.control_flags == cpu_to_le32((uint32_t)TCF_LUN_RESET)) {
int_to_scsilun(fxio->u.tmf.lun, &llun);
host_to_adap((uint8_t *)&llun, (uint8_t *)&tm_iocb.lun,
sizeof(struct scsi_lun));
}
- memcpy((void __iomem *)ptm_iocb, &tm_iocb,
+ memcpy((void *)ptm_iocb, &tm_iocb,
sizeof(struct tsk_mgmt_entry_fx00));
wmb();
}
abt_iocb.tgt_id_sts = cpu_to_le16(sp->fcport->tgt_id);
abt_iocb.req_que_no = cpu_to_le16(req->id);
- memcpy((void __iomem *)pabt_iocb, &abt_iocb,
+ memcpy((void *)pabt_iocb, &abt_iocb,
sizeof(struct abort_iocb_entry_fx00));
wmb();
}
if (sp->type == SRB_FXIOCB_DCMD) {
fx_iocb.func_num =
- cpu_to_le16(sp->u.iocb_cmd.u.fxiocb.req_func_type);
- fx_iocb.adapid = cpu_to_le32(fxio->u.fxiocb.adapter_id);
- fx_iocb.adapid_hi = cpu_to_le32(fxio->u.fxiocb.adapter_id_hi);
- fx_iocb.reserved_0 = cpu_to_le32(fxio->u.fxiocb.reserved_0);
- fx_iocb.reserved_1 = cpu_to_le32(fxio->u.fxiocb.reserved_1);
- fx_iocb.dataword_extra =
- cpu_to_le32(fxio->u.fxiocb.req_data_extra);
+ sp->u.iocb_cmd.u.fxiocb.req_func_type;
+ fx_iocb.adapid = fxio->u.fxiocb.adapter_id;
+ fx_iocb.adapid_hi = fxio->u.fxiocb.adapter_id_hi;
+ fx_iocb.reserved_0 = fxio->u.fxiocb.reserved_0;
+ fx_iocb.reserved_1 = fxio->u.fxiocb.reserved_1;
+ fx_iocb.dataword_extra = fxio->u.fxiocb.req_data_extra;
if (fxio->u.fxiocb.flags & SRB_FXDISC_REQ_DMA_VALID) {
fx_iocb.req_dsdcnt = cpu_to_le16(1);
}
if (fxio->u.fxiocb.flags & SRB_FXDISC_REQ_DWRD_VALID) {
- fx_iocb.dataword =
- cpu_to_le32(fxio->u.fxiocb.req_data);
+ fx_iocb.dataword = fxio->u.fxiocb.req_data;
}
fx_iocb.flags = fxio->u.fxiocb.flags;
} else {
fx_iocb.reserved_1 = piocb_rqst->reserved_1;
fx_iocb.dataword_extra = piocb_rqst->dataword_extra;
fx_iocb.dataword = piocb_rqst->dataword;
- fx_iocb.req_xfrcnt = cpu_to_le16(piocb_rqst->req_len);
- fx_iocb.rsp_xfrcnt = cpu_to_le16(piocb_rqst->rsp_len);
+ fx_iocb.req_xfrcnt = piocb_rqst->req_len;
+ fx_iocb.rsp_xfrcnt = piocb_rqst->rsp_len;
if (piocb_rqst->flags & SRB_FXDISC_REQ_DMA_VALID) {
int avail_dsds, tot_dsds;
cont_a64_entry_t lcont_pkt;
cont_a64_entry_t *cont_pkt = NULL;
- uint32_t *cur_dsd;
+ __le32 *cur_dsd;
int index = 0, cont = 0;
fx_iocb.req_dsdcnt =
cpu_to_le16(bsg_job->request_payload.sg_cnt);
tot_dsds =
- cpu_to_le32(bsg_job->request_payload.sg_cnt);
- cur_dsd = (uint32_t *)&fx_iocb.dseg_rq_address[0];
+ bsg_job->request_payload.sg_cnt;
+ cur_dsd = (__le32 *)&fx_iocb.dseg_rq_address[0];
avail_dsds = 1;
for_each_sg(bsg_job->request_payload.sg_list, sg,
tot_dsds, index) {
qlafx00_prep_cont_type1_iocb(
sp->fcport->vha->req,
&lcont_pkt);
- cur_dsd = (uint32_t *)
+ cur_dsd = (__le32 *)
lcont_pkt.dseg_0_address;
avail_dsds = 5;
cont = 1;
int avail_dsds, tot_dsds;
cont_a64_entry_t lcont_pkt;
cont_a64_entry_t *cont_pkt = NULL;
- uint32_t *cur_dsd;
+ __le32 *cur_dsd;
int index = 0, cont = 0;
fx_iocb.rsp_dsdcnt =
cpu_to_le16(bsg_job->reply_payload.sg_cnt);
- tot_dsds = cpu_to_le32(bsg_job->reply_payload.sg_cnt);
- cur_dsd = (uint32_t *)&fx_iocb.dseg_rsp_address[0];
+ tot_dsds = bsg_job->reply_payload.sg_cnt;
+ cur_dsd = (__le32 *)&fx_iocb.dseg_rsp_address[0];
avail_dsds = 1;
for_each_sg(bsg_job->reply_payload.sg_list, sg,
qlafx00_prep_cont_type1_iocb(
sp->fcport->vha->req,
&lcont_pkt);
- cur_dsd = (uint32_t *)
+ cur_dsd = (__le32 *)
lcont_pkt.dseg_0_address;
avail_dsds = 5;
cont = 1;
}
if (piocb_rqst->flags & SRB_FXDISC_REQ_DWRD_VALID)
- fx_iocb.dataword = cpu_to_le32(piocb_rqst->dataword);
+ fx_iocb.dataword = piocb_rqst->dataword;
fx_iocb.flags = piocb_rqst->flags;
fx_iocb.entry_count = entry_cnt;
}
sp->fcport->vha, 0x3047,
(uint8_t *)&fx_iocb, sizeof(struct fxdisc_entry_fx00));
- memcpy((void __iomem *)pfxiocb, &fx_iocb,
+ memcpy((void *)pfxiocb, &fx_iocb,
sizeof(struct fxdisc_entry_fx00));
wmb();
}
uint32_t handle; /* System handle. */
uint32_t handle_hi;
- uint16_t tgt_idx; /* Target Idx. */
+ __le16 tgt_idx; /* Target Idx. */
uint16_t timeout; /* Command timeout. */
- uint16_t dseg_count; /* Data segment count. */
+ __le16 dseg_count; /* Data segment count. */
uint16_t scsi_rsp_dsd_len;
struct scsi_lun lun; /* LUN (LE). */
uint8_t crn;
uint8_t fcp_cdb[MAX_CMDSZ]; /* SCSI command words. */
- uint32_t byte_count; /* Total byte count. */
+ __le32 byte_count; /* Total byte count. */
uint32_t dseg_0_address[2]; /* Data segment 0 address. */
uint32_t dseg_0_len; /* Data segment 0 length. */
uint32_t handle; /* System handle. */
uint32_t handle_hi; /* System handle. */
- uint16_t comp_status; /* Completion status. */
+ __le16 comp_status; /* Completion status. */
uint16_t reserved_0; /* OX_ID used by the firmware. */
- uint32_t residual_len; /* FW calc residual transfer length. */
+ __le32 residual_len; /* FW calc residual transfer length. */
uint16_t reserved_1;
uint16_t state_flags; /* State flags. */
uint16_t reserved_2;
- uint16_t scsi_status; /* SCSI status. */
+ __le16 scsi_status; /* SCSI status. */
uint32_t sense_len; /* FCP SENSE length. */
uint8_t data[32]; /* FCP response/sense information. */
uint8_t handle_count;
uint8_t entry_status;
- uint32_t handles[MAX_HANDLE_COUNT];
+ __le32 handles[MAX_HANDLE_COUNT];
};
#define TSK_MGMT_IOCB_TYPE_FX00 0x05
uint8_t sys_define;
uint8_t entry_status; /* Entry Status. */
- uint32_t handle; /* System handle. */
+ __le32 handle; /* System handle. */
uint32_t handle_hi; /* System handle. */
- uint16_t tgt_id; /* Target Idx. */
+ __le16 tgt_id; /* Target Idx. */
uint16_t reserved_1;
uint16_t delay; /* Activity delay in seconds. */
- uint16_t timeout; /* Command timeout. */
+ __le16 timeout; /* Command timeout. */
struct scsi_lun lun; /* LUN (LE). */
- uint32_t control_flags; /* Control Flags. */
+ __le32 control_flags; /* Control Flags. */
uint8_t reserved_2[32];
};
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
- uint32_t handle; /* System handle. */
- uint32_t handle_hi; /* System handle. */
+ __le32 handle; /* System handle. */
+ __le32 handle_hi; /* System handle. */
- uint16_t tgt_id_sts; /* Completion status. */
- uint16_t options;
+ __le16 tgt_id_sts; /* Completion status. */
+ __le16 options;
- uint32_t abort_handle; /* System handle. */
- uint32_t abort_handle_hi; /* System handle. */
+ __le32 abort_handle; /* System handle. */
+ __le32 abort_handle_hi; /* System handle. */
- uint16_t req_que_no;
+ __le16 req_que_no;
uint8_t reserved_1[38];
};
uint32_t reserved_0; /* System handle. */
uint16_t comp_func_num;
- uint16_t fw_iotcl_flags;
+ __le16 fw_iotcl_flags;
- uint32_t dataword_r; /* Data word returned */
+ __le32 dataword_r; /* Data word returned */
uint32_t adapid; /* Adapter ID */
uint32_t adapid_hi; /* Adapter ID high */
uint32_t reserved_1;
- uint32_t seq_no;
+ __le32 seq_no;
uint8_t reserved_2[20];
uint32_t residuallen;
- uint32_t status;
+ __le32 status;
};
#define STATUS_CONT_TYPE_FX00 0x04
uint8_t sys_define; /* System Defined. */
uint8_t entry_status; /* Entry Status. */
- uint32_t handle; /* System handle. */
- uint32_t reserved_0; /* System handle. */
+ __le32 handle; /* System handle. */
+ __le32 reserved_0; /* System handle. */
- uint16_t func_num;
- uint16_t req_xfrcnt;
- uint16_t req_dsdcnt;
- uint16_t rsp_xfrcnt;
- uint16_t rsp_dsdcnt;
+ __le16 func_num;
+ __le16 req_xfrcnt;
+ __le16 req_dsdcnt;
+ __le16 rsp_xfrcnt;
+ __le16 rsp_dsdcnt;
uint8_t flags;
uint8_t reserved_1;
- uint32_t dseg_rq_address[2]; /* Data segment 0 address. */
- uint32_t dseg_rq_len; /* Data segment 0 length. */
- uint32_t dseg_rsp_address[2]; /* Data segment 1 address. */
- uint32_t dseg_rsp_len; /* Data segment 1 length. */
+ __le32 dseg_rq_address[2]; /* Data segment 0 address. */
+ __le32 dseg_rq_len; /* Data segment 0 length. */
+ __le32 dseg_rsp_address[2]; /* Data segment 1 address. */
+ __le32 dseg_rsp_len; /* Data segment 1 length. */
- uint32_t dataword;
- uint32_t adapid;
- uint32_t adapid_hi;
- uint32_t dataword_extra;
+ __le32 dataword;
+ __le32 adapid;
+ __le32 adapid_hi;
+ __le32 dataword_extra;
};
struct qlafx00_tgt_node_info {
WRT_REG_DWORD((ha)->cregbase + off, val)
struct qla_mt_iocb_rqst_fx00 {
- uint32_t reserved_0;
+ __le32 reserved_0;
- uint16_t func_type;
+ __le16 func_type;
uint8_t flags;
uint8_t reserved_1;
- uint32_t dataword;
+ __le32 dataword;
- uint32_t adapid;
- uint32_t adapid_hi;
+ __le32 adapid;
+ __le32 adapid_hi;
- uint32_t dataword_extra;
+ __le32 dataword_extra;
- uint32_t req_len;
+ __le32 req_len;
- uint32_t rsp_len;
+ __le32 rsp_len;
};
struct qla_mt_iocb_rsp_fx00 {
uint32_t reserved_1;
uint16_t func_type;
- uint16_t ioctl_flags;
+ __le16 ioctl_flags;
- uint32_t ioctl_data;
+ __le32 ioctl_data;
uint32_t adapid;
uint32_t adapid_hi;
uint32_t reserved_2;
- uint32_t seq_number;
+ __le32 seq_number;
uint8_t reserved_3[20];
int32_t res_count;
- uint32_t status;
+ __le32 status;
};
"Set to control shifting of command type processing "
"based on total number of SG elements.");
-static void qla2x00_free_device(scsi_qla_host_t *);
-
int ql2xfdmienable=1;
module_param(ql2xfdmienable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xfdmienable,
static int qla2x00_change_queue_depth(struct scsi_device *, int, int);
static int qla2x00_change_queue_type(struct scsi_device *, int);
+static void qla2x00_free_device(scsi_qla_host_t *);
struct scsi_host_template qla2xxx_driver_template = {
.module = THIS_MODULE,
qla2x00_dfs_setup(base_vha);
ql_log(ql_log_info, base_vha, 0x00fb,
- "QLogic %s - %s.\n",
- ha->model_number, ha->model_desc ? ha->model_desc : "");
+ "QLogic %s - %s.\n", ha->model_number, ha->model_desc);
ql_log(ql_log_info, base_vha, 0x00fc,
"ISP%04X: %s @ %s hdma%c host#=%ld fw=%s.\n",
pdev->device, ha->isp_ops->pci_info_str(base_vha, pci_info),
set_bit(UNLOADING, &base_vha->dpc_flags);
mutex_lock(&ha->vport_lock);
while (ha->cur_vport_count) {
- struct Scsi_Host *scsi_host;
-
spin_lock_irqsave(&ha->vport_slock, flags);
BUG_ON(base_vha->list.next == &ha->vp_list);
/* This assumes first entry in ha->vp_list is always base vha */
vha = list_first_entry(&base_vha->list, scsi_qla_host_t, list);
- scsi_host = scsi_host_get(vha->host);
+ scsi_host_get(vha->host);
spin_unlock_irqrestore(&ha->vport_slock, flags);
mutex_unlock(&ha->vport_lock);
static struct sdebug_queued_cmd queued_arr[SCSI_DEBUG_CANQUEUE];
static unsigned char * fake_storep; /* ramdisk storage */
-static unsigned char *dif_storep; /* protection info */
+static struct sd_dif_tuple *dif_storep; /* protection info */
static void *map_storep; /* provisioning map */
static unsigned long map_size;
static struct bus_type pseudo_lld_bus;
-static inline sector_t dif_offset(sector_t sector)
-{
- return sector << 3;
-}
-
static struct device_driver sdebug_driverfs_driver = {
.name = sdebug_proc_name,
.bus = &pseudo_lld_bus,
return ret;
}
+static u16 dif_compute_csum(const void *buf, int len)
+{
+ u16 csum;
+
+ switch (scsi_debug_guard) {
+ case 1:
+ csum = ip_compute_csum(buf, len);
+ break;
+ case 0:
+ csum = cpu_to_be16(crc_t10dif(buf, len));
+ break;
+ }
+ return csum;
+}
+
+static int dif_verify(struct sd_dif_tuple *sdt, const void *data,
+ sector_t sector, u32 ei_lba)
+{
+ u16 csum = dif_compute_csum(data, scsi_debug_sector_size);
+
+ if (sdt->guard_tag != csum) {
+ pr_err("%s: GUARD check failed on sector %lu rcvd 0x%04x, data 0x%04x\n",
+ __func__,
+ (unsigned long)sector,
+ be16_to_cpu(sdt->guard_tag),
+ be16_to_cpu(csum));
+ return 0x01;
+ }
+ if (scsi_debug_dif == SD_DIF_TYPE1_PROTECTION &&
+ be32_to_cpu(sdt->ref_tag) != (sector & 0xffffffff)) {
+ pr_err("%s: REF check failed on sector %lu\n",
+ __func__, (unsigned long)sector);
+ return 0x03;
+ }
+ if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+ be32_to_cpu(sdt->ref_tag) != ei_lba) {
+ pr_err("%s: REF check failed on sector %lu\n",
+ __func__, (unsigned long)sector);
+ dif_errors++;
+ return 0x03;
+ }
+ return 0;
+}
+
static int prot_verify_read(struct scsi_cmnd *SCpnt, sector_t start_sec,
unsigned int sectors, u32 ei_lba)
{
start_sec = do_div(tmp_sec, sdebug_store_sectors);
- sdt = (struct sd_dif_tuple *)(dif_storep + dif_offset(start_sec));
+ sdt = dif_storep + start_sec;
for (i = 0 ; i < sectors ; i++) {
- u16 csum;
+ int ret;
if (sdt[i].app_tag == 0xffff)
continue;
sector = start_sec + i;
- switch (scsi_debug_guard) {
- case 1:
- csum = ip_compute_csum(fake_storep +
- sector * scsi_debug_sector_size,
- scsi_debug_sector_size);
- break;
- case 0:
- csum = crc_t10dif(fake_storep +
- sector * scsi_debug_sector_size,
- scsi_debug_sector_size);
- csum = cpu_to_be16(csum);
- break;
- default:
- BUG();
- }
-
- if (sdt[i].guard_tag != csum) {
- printk(KERN_ERR "%s: GUARD check failed on sector %lu" \
- " rcvd 0x%04x, data 0x%04x\n", __func__,
- (unsigned long)sector,
- be16_to_cpu(sdt[i].guard_tag),
- be16_to_cpu(csum));
- dif_errors++;
- return 0x01;
- }
-
- if (scsi_debug_dif == SD_DIF_TYPE1_PROTECTION &&
- be32_to_cpu(sdt[i].ref_tag) != (sector & 0xffffffff)) {
- printk(KERN_ERR "%s: REF check failed on sector %lu\n",
- __func__, (unsigned long)sector);
+ ret = dif_verify(&sdt[i],
+ fake_storep + sector * scsi_debug_sector_size,
+ sector, ei_lba);
+ if (ret) {
dif_errors++;
- return 0x03;
- }
-
- if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
- be32_to_cpu(sdt[i].ref_tag) != ei_lba) {
- printk(KERN_ERR "%s: REF check failed on sector %lu\n",
- __func__, (unsigned long)sector);
- dif_errors++;
- return 0x03;
+ return ret;
}
ei_lba++;
}
- resid = sectors * 8; /* Bytes of protection data to copy into sgl */
+ /* Bytes of protection data to copy into sgl */
+ resid = sectors * sizeof(*dif_storep);
sector = start_sec;
scsi_for_each_prot_sg(SCpnt, psgl, scsi_prot_sg_count(SCpnt), i) {
int len = min(psgl->length, resid);
paddr = kmap_atomic(sg_page(psgl)) + psgl->offset;
- memcpy(paddr, dif_storep + dif_offset(sector), len);
+ memcpy(paddr, dif_storep + sector, len);
- sector += len >> 3;
+ sector += len / sizeof(*dif_storep);
if (sector >= sdebug_store_sectors) {
/* Force wrap */
tmp_sec = sector;
sector_t tmp_sec = start_sec;
sector_t sector;
int ppage_offset;
- unsigned short csum;
sector = do_div(tmp_sec, sdebug_store_sectors);
BUG_ON(scsi_sg_count(SCpnt) == 0);
BUG_ON(scsi_prot_sg_count(SCpnt) == 0);
- paddr = kmap_atomic(sg_page(psgl)) + psgl->offset;
ppage_offset = 0;
/* For each data page */
scsi_for_each_sg(SCpnt, dsgl, scsi_sg_count(SCpnt), i) {
daddr = kmap_atomic(sg_page(dsgl)) + dsgl->offset;
+ paddr = kmap_atomic(sg_page(psgl)) + psgl->offset;
/* For each sector-sized chunk in data page */
- for (j = 0 ; j < dsgl->length ; j += scsi_debug_sector_size) {
+ for (j = 0; j < dsgl->length; j += scsi_debug_sector_size) {
/* If we're at the end of the current
* protection page advance to the next one
sdt = paddr + ppage_offset;
- switch (scsi_debug_guard) {
- case 1:
- csum = ip_compute_csum(daddr,
- scsi_debug_sector_size);
- break;
- case 0:
- csum = cpu_to_be16(crc_t10dif(daddr,
- scsi_debug_sector_size));
- break;
- default:
- BUG();
- ret = 0;
- goto out;
- }
-
- if (sdt->guard_tag != csum) {
- printk(KERN_ERR
- "%s: GUARD check failed on sector %lu " \
- "rcvd 0x%04x, calculated 0x%04x\n",
- __func__, (unsigned long)sector,
- be16_to_cpu(sdt->guard_tag),
- be16_to_cpu(csum));
- ret = 0x01;
- dump_sector(daddr, scsi_debug_sector_size);
- goto out;
- }
-
- if (scsi_debug_dif == SD_DIF_TYPE1_PROTECTION &&
- be32_to_cpu(sdt->ref_tag)
- != (start_sec & 0xffffffff)) {
- printk(KERN_ERR
- "%s: REF check failed on sector %lu\n",
- __func__, (unsigned long)sector);
- ret = 0x03;
- dump_sector(daddr, scsi_debug_sector_size);
- goto out;
- }
-
- if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
- be32_to_cpu(sdt->ref_tag) != ei_lba) {
- printk(KERN_ERR
- "%s: REF check failed on sector %lu\n",
- __func__, (unsigned long)sector);
- ret = 0x03;
- dump_sector(daddr, scsi_debug_sector_size);
+ ret = dif_verify(sdt, daddr + j, start_sec, ei_lba);
+ if (ret) {
+ dump_sector(daddr + j, scsi_debug_sector_size);
goto out;
}
* correctness we need to verify each sector
* before writing it to "stable" storage
*/
- memcpy(dif_storep + dif_offset(sector), sdt, 8);
+ memcpy(dif_storep + sector, sdt, sizeof(*sdt));
sector++;
start_sec++;
ei_lba++;
- daddr += scsi_debug_sector_size;
ppage_offset += sizeof(struct sd_dif_tuple);
}
+ kunmap_atomic(paddr);
kunmap_atomic(daddr);
}
- kunmap_atomic(paddr);
-
dix_writes++;
return 0;
out:
dif_errors++;
- kunmap_atomic(daddr);
kunmap_atomic(paddr);
+ kunmap_atomic(daddr);
return ret;
}
scsi_debug_sector_size *
scsi_debug_unmap_granularity);
}
+ if (dif_storep) {
+ memset(dif_storep + lba, 0xff,
+ sizeof(*dif_storep) *
+ scsi_debug_unmap_granularity);
+ }
}
lba = map_index_to_lba(index + 1);
}
if (scsi_debug_num_parts > 0)
sdebug_build_parts(fake_storep, sz);
- if (scsi_debug_dif) {
+ if (scsi_debug_dix) {
int dif_size;
dif_size = sdebug_store_sectors * sizeof(struct sd_dif_tuple);
list_splice_init(&shost->starved_list, &starved_list);
while (!list_empty(&starved_list)) {
+ struct request_queue *slq;
+
/*
* As long as shost is accepting commands and we have
* starved queues, call blk_run_queue. scsi_request_fn
continue;
}
- spin_unlock(shost->host_lock);
- spin_lock(sdev->request_queue->queue_lock);
- __blk_run_queue(sdev->request_queue);
- spin_unlock(sdev->request_queue->queue_lock);
- spin_lock(shost->host_lock);
+ /*
+ * Once we drop the host lock, a racing scsi_remove_device()
+ * call may remove the sdev from the starved list and destroy
+ * it and the queue. Mitigate by taking a reference to the
+ * queue and never touching the sdev again after we drop the
+ * host lock. Note: if __scsi_remove_device() invokes
+ * blk_cleanup_queue() before the queue is run from this
+ * function then blk_run_queue() will return immediately since
+ * blk_cleanup_queue() marks the queue with QUEUE_FLAG_DYING.
+ */
+ slq = sdev->request_queue;
+ if (!blk_get_queue(slq))
+ continue;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ blk_run_queue(slq);
+ blk_put_queue(slq);
+
+ spin_lock_irqsave(shost->host_lock, flags);
}
/* put any unprocessed entries back */
list_splice(&starved_list, &shost->starved_list);
case SDEV_OFFLINE:
case SDEV_TRANSPORT_OFFLINE:
case SDEV_CANCEL:
+ case SDEV_CREATED_BLOCK:
break;
default:
goto illegal;
*/
static int storvsc_timeout = 180;
-#define STORVSC_MAX_IO_REQUESTS 128
+#define STORVSC_MAX_IO_REQUESTS 200
+
+static void storvsc_on_channel_callback(void *context);
/*
* In Hyper-V, each port/path/target maps to 1 scsi host adapter. In
bool destroy;
bool drain_notify;
+ bool open_sub_channel;
atomic_t num_outstanding_req;
struct Scsi_Host *host;
return total_copied;
}
+static void handle_sc_creation(struct vmbus_channel *new_sc)
+{
+ struct hv_device *device = new_sc->primary_channel->device_obj;
+ struct storvsc_device *stor_device;
+ struct vmstorage_channel_properties props;
+
+ stor_device = get_out_stor_device(device);
+ if (!stor_device)
+ return;
+
+ if (stor_device->open_sub_channel == false)
+ return;
+
+ memset(&props, 0, sizeof(struct vmstorage_channel_properties));
+
+ vmbus_open(new_sc,
+ storvsc_ringbuffer_size,
+ storvsc_ringbuffer_size,
+ (void *)&props,
+ sizeof(struct vmstorage_channel_properties),
+ storvsc_on_channel_callback, new_sc);
+}
+
+static void handle_multichannel_storage(struct hv_device *device, int max_chns)
+{
+ struct storvsc_device *stor_device;
+ int num_cpus = num_online_cpus();
+ int num_sc;
+ struct storvsc_cmd_request *request;
+ struct vstor_packet *vstor_packet;
+ int ret, t;
+
+ num_sc = ((max_chns > num_cpus) ? num_cpus : max_chns);
+ stor_device = get_out_stor_device(device);
+ if (!stor_device)
+ return;
+
+ request = &stor_device->init_request;
+ vstor_packet = &request->vstor_packet;
+
+ stor_device->open_sub_channel = true;
+ /*
+ * Establish a handler for dealing with subchannels.
+ */
+ vmbus_set_sc_create_callback(device->channel, handle_sc_creation);
+
+ /*
+ * Check to see if sub-channels have already been created. This
+ * can happen when this driver is re-loaded after unloading.
+ */
+
+ if (vmbus_are_subchannels_present(device->channel))
+ return;
+
+ stor_device->open_sub_channel = false;
+ /*
+ * Request the host to create sub-channels.
+ */
+ memset(request, 0, sizeof(struct storvsc_cmd_request));
+ init_completion(&request->wait_event);
+ vstor_packet->operation = VSTOR_OPERATION_CREATE_SUB_CHANNELS;
+ vstor_packet->flags = REQUEST_COMPLETION_FLAG;
+ vstor_packet->sub_channel_count = num_sc;
+
+ ret = vmbus_sendpacket(device->channel, vstor_packet,
+ (sizeof(struct vstor_packet) -
+ vmscsi_size_delta),
+ (unsigned long)request,
+ VM_PKT_DATA_INBAND,
+ VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+
+ if (ret != 0)
+ return;
+
+ t = wait_for_completion_timeout(&request->wait_event, 10*HZ);
+ if (t == 0)
+ return;
+
+ if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
+ vstor_packet->status != 0)
+ return;
+
+ /*
+ * Now that we created the sub-channels, invoke the check; this
+ * may trigger the callback.
+ */
+ stor_device->open_sub_channel = true;
+ vmbus_are_subchannels_present(device->channel);
+}
+
static int storvsc_channel_init(struct hv_device *device)
{
struct storvsc_device *stor_device;
struct storvsc_cmd_request *request;
struct vstor_packet *vstor_packet;
int ret, t;
+ int max_chns;
+ bool process_sub_channels = false;
stor_device = get_out_stor_device(device);
if (!stor_device)
vstor_packet->status != 0)
goto cleanup;
+ /*
+ * Check to see if multi-channel support is there.
+ * Hosts that implement protocol version of 5.1 and above
+ * support multi-channel.
+ */
+ max_chns = vstor_packet->storage_channel_properties.max_channel_cnt;
+ if ((vmbus_proto_version != VERSION_WIN7) &&
+ (vmbus_proto_version != VERSION_WS2008)) {
+ if (vstor_packet->storage_channel_properties.flags &
+ STORAGE_CHANNEL_SUPPORTS_MULTI_CHANNEL)
+ process_sub_channels = true;
+ }
+
memset(vstor_packet, 0, sizeof(struct vstor_packet));
vstor_packet->operation = VSTOR_OPERATION_END_INITIALIZATION;
vstor_packet->flags = REQUEST_COMPLETION_FLAG;
vstor_packet->status != 0)
goto cleanup;
+ if (process_sub_channels)
+ handle_multichannel_storage(device, max_chns);
+
cleanup:
return ret;
static void storvsc_on_channel_callback(void *context)
{
- struct hv_device *device = (struct hv_device *)context;
+ struct vmbus_channel *channel = (struct vmbus_channel *)context;
+ struct hv_device *device;
struct storvsc_device *stor_device;
u32 bytes_recvd;
u64 request_id;
struct storvsc_cmd_request *request;
int ret;
+ if (channel->primary_channel != NULL)
+ device = channel->primary_channel->device_obj;
+ else
+ device = channel->device_obj;
stor_device = get_in_stor_device(device);
if (!stor_device)
return;
do {
- ret = vmbus_recvpacket(device->channel, packet,
+ ret = vmbus_recvpacket(channel, packet,
ALIGN((sizeof(struct vstor_packet) -
vmscsi_size_delta), 8),
&bytes_recvd, &request_id);
ring_size,
(void *)&props,
sizeof(struct vmstorage_channel_properties),
- storvsc_on_channel_callback, device);
+ storvsc_on_channel_callback, device->channel);
if (ret != 0)
return ret;
{
struct storvsc_device *stor_device;
struct vstor_packet *vstor_packet;
+ struct vmbus_channel *outgoing_channel;
int ret = 0;
vstor_packet = &request->vstor_packet;
request->device = device;
+ /*
+ * Select an an appropriate channel to send the request out.
+ */
+
+ outgoing_channel = vmbus_get_outgoing_channel(device->channel);
vstor_packet->flags |= REQUEST_COMPLETION_FLAG;
vstor_packet->operation = VSTOR_OPERATION_EXECUTE_SRB;
if (request->data_buffer.len) {
- ret = vmbus_sendpacket_multipagebuffer(device->channel,
+ ret = vmbus_sendpacket_multipagebuffer(outgoing_channel,
&request->data_buffer,
vstor_packet,
(sizeof(struct vstor_packet) -
enum {
SCSI_GUID,
IDE_GUID,
+ SFC_GUID,
};
static const struct hv_vmbus_device_id id_table[] = {
{ HV_IDE_GUID,
.driver_data = IDE_GUID
},
+ /* Fibre Channel GUID */
+ {
+ HV_SYNTHFC_GUID,
+ .driver_data = SFC_GUID
+ },
{ },
};
}
stor_device->destroy = false;
+ stor_device->open_sub_channel = false;
init_waitqueue_head(&stor_device->waiting_to_drain);
stor_device->device = device;
stor_device->host = host;
projects / linux-imx.git / commitdiff