2 * dummy_hcd.c -- Dummy/Loopback USB host and device emulator driver.
4 * Maintainer: Alan Stern <stern@rowland.harvard.edu>
6 * Copyright (C) 2003 David Brownell
7 * Copyright (C) 2003-2005 Alan Stern
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
17 * This exposes a device side "USB gadget" API, driven by requests to a
18 * Linux-USB host controller driver. USB traffic is simulated; there's
19 * no need for USB hardware. Use this with two other drivers:
21 * - Gadget driver, responding to requests (slave);
22 * - Host-side device driver, as already familiar in Linux.
24 * Having this all in one kernel can help some stages of development,
25 * bypassing some hardware (and driver) issues. UML could help too.
28 #include <linux/module.h>
29 #include <linux/kernel.h>
30 #include <linux/delay.h>
31 #include <linux/ioport.h>
32 #include <linux/slab.h>
33 #include <linux/errno.h>
34 #include <linux/init.h>
35 #include <linux/timer.h>
36 #include <linux/list.h>
37 #include <linux/interrupt.h>
38 #include <linux/platform_device.h>
39 #include <linux/usb.h>
40 #include <linux/usb/gadget.h>
41 #include <linux/usb/hcd.h>
42 #include <linux/scatterlist.h>
44 #include <asm/byteorder.h>
47 #include <asm/unaligned.h>
49 #define DRIVER_DESC "USB Host+Gadget Emulator"
50 #define DRIVER_VERSION "02 May 2005"
52 #define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */
54 static const char driver_name[] = "dummy_hcd";
55 static const char driver_desc[] = "USB Host+Gadget Emulator";
57 static const char gadget_name[] = "dummy_udc";
59 MODULE_DESCRIPTION(DRIVER_DESC);
60 MODULE_AUTHOR("David Brownell");
61 MODULE_LICENSE("GPL");
63 struct dummy_hcd_module_parameters {
68 static struct dummy_hcd_module_parameters mod_data = {
69 .is_super_speed = false,
70 .is_high_speed = true,
72 module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO);
73 MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection");
74 module_param_named(is_high_speed, mod_data.is_high_speed, bool, S_IRUGO);
75 MODULE_PARM_DESC(is_high_speed, "true to simulate HighSpeed connection");
76 /*-------------------------------------------------------------------------*/
78 /* gadget side driver data structres */
80 struct list_head queue;
81 unsigned long last_io; /* jiffies timestamp */
82 struct usb_gadget *gadget;
83 const struct usb_endpoint_descriptor *desc;
87 unsigned already_seen:1;
88 unsigned setup_stage:1;
92 struct dummy_request {
93 struct list_head queue; /* ep's requests */
94 struct usb_request req;
97 static inline struct dummy_ep *usb_ep_to_dummy_ep(struct usb_ep *_ep)
99 return container_of(_ep, struct dummy_ep, ep);
102 static inline struct dummy_request *usb_request_to_dummy_request
103 (struct usb_request *_req)
105 return container_of(_req, struct dummy_request, req);
108 /*-------------------------------------------------------------------------*/
111 * Every device has ep0 for control requests, plus up to 30 more endpoints,
112 * in one of two types:
114 * - Configurable: direction (in/out), type (bulk, iso, etc), and endpoint
115 * number can be changed. Names like "ep-a" are used for this type.
117 * - Fixed Function: in other cases. some characteristics may be mutable;
118 * that'd be hardware-specific. Names like "ep12out-bulk" are used.
120 * Gadget drivers are responsible for not setting up conflicting endpoint
121 * configurations, illegal or unsupported packet lengths, and so on.
124 static const char ep0name[] = "ep0";
126 static const char *const ep_name[] = {
127 ep0name, /* everyone has ep0 */
129 /* act like a net2280: high speed, six configurable endpoints */
130 "ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f",
132 /* or like pxa250: fifteen fixed function endpoints */
133 "ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int",
134 "ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int",
135 "ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso",
138 /* or like sa1100: two fixed function endpoints */
139 "ep1out-bulk", "ep2in-bulk",
141 #define DUMMY_ENDPOINTS ARRAY_SIZE(ep_name)
143 /*-------------------------------------------------------------------------*/
149 struct list_head urbp_list;
150 struct sg_mapping_iter miter;
155 enum dummy_rh_state {
163 enum dummy_rh_state rh_state;
164 struct timer_list timer;
167 unsigned long re_timeout;
169 struct usb_device *udev;
170 struct list_head urbp_list;
172 u8 num_stream[30 / 2];
175 unsigned old_active:1;
183 * SLAVE/GADGET side support
185 struct dummy_ep ep[DUMMY_ENDPOINTS];
187 struct usb_gadget gadget;
188 struct usb_gadget_driver *driver;
189 struct dummy_request fifo_req;
190 u8 fifo_buf[FIFO_SIZE];
192 unsigned udc_suspended:1;
196 * MASTER/HOST side support
198 struct dummy_hcd *hs_hcd;
199 struct dummy_hcd *ss_hcd;
202 static inline struct dummy_hcd *hcd_to_dummy_hcd(struct usb_hcd *hcd)
204 return (struct dummy_hcd *) (hcd->hcd_priv);
207 static inline struct usb_hcd *dummy_hcd_to_hcd(struct dummy_hcd *dum)
209 return container_of((void *) dum, struct usb_hcd, hcd_priv);
212 static inline struct device *dummy_dev(struct dummy_hcd *dum)
214 return dummy_hcd_to_hcd(dum)->self.controller;
217 static inline struct device *udc_dev(struct dummy *dum)
219 return dum->gadget.dev.parent;
222 static inline struct dummy *ep_to_dummy(struct dummy_ep *ep)
224 return container_of(ep->gadget, struct dummy, gadget);
227 static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget)
229 struct dummy *dum = container_of(gadget, struct dummy, gadget);
230 if (dum->gadget.speed == USB_SPEED_SUPER)
236 static inline struct dummy *gadget_dev_to_dummy(struct device *dev)
238 return container_of(dev, struct dummy, gadget.dev);
241 static struct dummy the_controller;
243 /*-------------------------------------------------------------------------*/
245 /* SLAVE/GADGET SIDE UTILITY ROUTINES */
247 /* called with spinlock held */
248 static void nuke(struct dummy *dum, struct dummy_ep *ep)
250 while (!list_empty(&ep->queue)) {
251 struct dummy_request *req;
253 req = list_entry(ep->queue.next, struct dummy_request, queue);
254 list_del_init(&req->queue);
255 req->req.status = -ESHUTDOWN;
257 spin_unlock(&dum->lock);
258 req->req.complete(&ep->ep, &req->req);
259 spin_lock(&dum->lock);
263 /* caller must hold lock */
264 static void stop_activity(struct dummy *dum)
268 /* prevent any more requests */
271 /* The timer is left running so that outstanding URBs can fail */
273 /* nuke any pending requests first, so driver i/o is quiesced */
274 list_for_each_entry(ep, &dum->gadget.ep_list, ep.ep_list)
277 /* driver now does any non-usb quiescing necessary */
281 * set_link_state_by_speed() - Sets the current state of the link according to
283 * @dum_hcd: pointer to the dummy_hcd structure to update the link state for
285 * This function updates the port_status according to the link state and the
288 static void set_link_state_by_speed(struct dummy_hcd *dum_hcd)
290 struct dummy *dum = dum_hcd->dum;
292 if (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3) {
293 if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) == 0) {
294 dum_hcd->port_status = 0;
295 } else if (!dum->pullup || dum->udc_suspended) {
296 /* UDC suspend must cause a disconnect */
297 dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION |
298 USB_PORT_STAT_ENABLE);
299 if ((dum_hcd->old_status &
300 USB_PORT_STAT_CONNECTION) != 0)
301 dum_hcd->port_status |=
302 (USB_PORT_STAT_C_CONNECTION << 16);
304 /* device is connected and not suspended */
305 dum_hcd->port_status |= (USB_PORT_STAT_CONNECTION |
306 USB_PORT_STAT_SPEED_5GBPS) ;
307 if ((dum_hcd->old_status &
308 USB_PORT_STAT_CONNECTION) == 0)
309 dum_hcd->port_status |=
310 (USB_PORT_STAT_C_CONNECTION << 16);
311 if ((dum_hcd->port_status &
312 USB_PORT_STAT_ENABLE) == 1 &&
313 (dum_hcd->port_status &
314 USB_SS_PORT_LS_U0) == 1 &&
315 dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
319 if ((dum_hcd->port_status & USB_PORT_STAT_POWER) == 0) {
320 dum_hcd->port_status = 0;
321 } else if (!dum->pullup || dum->udc_suspended) {
322 /* UDC suspend must cause a disconnect */
323 dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION |
324 USB_PORT_STAT_ENABLE |
325 USB_PORT_STAT_LOW_SPEED |
326 USB_PORT_STAT_HIGH_SPEED |
327 USB_PORT_STAT_SUSPEND);
328 if ((dum_hcd->old_status &
329 USB_PORT_STAT_CONNECTION) != 0)
330 dum_hcd->port_status |=
331 (USB_PORT_STAT_C_CONNECTION << 16);
333 dum_hcd->port_status |= USB_PORT_STAT_CONNECTION;
334 if ((dum_hcd->old_status &
335 USB_PORT_STAT_CONNECTION) == 0)
336 dum_hcd->port_status |=
337 (USB_PORT_STAT_C_CONNECTION << 16);
338 if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0)
339 dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
340 else if ((dum_hcd->port_status &
341 USB_PORT_STAT_SUSPEND) == 0 &&
342 dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
348 /* caller must hold lock */
349 static void set_link_state(struct dummy_hcd *dum_hcd)
351 struct dummy *dum = dum_hcd->dum;
355 if ((dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 &&
356 dum->gadget.speed != USB_SPEED_SUPER) ||
357 (dummy_hcd_to_hcd(dum_hcd)->speed != HCD_USB3 &&
358 dum->gadget.speed == USB_SPEED_SUPER))
361 set_link_state_by_speed(dum_hcd);
363 if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0 ||
365 dum_hcd->resuming = 0;
367 /* if !connected or reset */
368 if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0 ||
369 (dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) {
371 * We're connected and not reset (reset occurred now),
372 * and driver attached - disconnect!
374 if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) != 0 &&
375 (dum_hcd->old_status & USB_PORT_STAT_RESET) == 0 &&
378 spin_unlock(&dum->lock);
379 dum->driver->disconnect(&dum->gadget);
380 spin_lock(&dum->lock);
382 } else if (dum_hcd->active != dum_hcd->old_active) {
383 if (dum_hcd->old_active && dum->driver->suspend) {
384 spin_unlock(&dum->lock);
385 dum->driver->suspend(&dum->gadget);
386 spin_lock(&dum->lock);
387 } else if (!dum_hcd->old_active && dum->driver->resume) {
388 spin_unlock(&dum->lock);
389 dum->driver->resume(&dum->gadget);
390 spin_lock(&dum->lock);
394 dum_hcd->old_status = dum_hcd->port_status;
395 dum_hcd->old_active = dum_hcd->active;
398 /*-------------------------------------------------------------------------*/
400 /* SLAVE/GADGET SIDE DRIVER
402 * This only tracks gadget state. All the work is done when the host
403 * side tries some (emulated) i/o operation. Real device controller
404 * drivers would do real i/o using dma, fifos, irqs, timers, etc.
407 #define is_enabled(dum) \
408 (dum->port_status & USB_PORT_STAT_ENABLE)
410 static int dummy_enable(struct usb_ep *_ep,
411 const struct usb_endpoint_descriptor *desc)
414 struct dummy_hcd *dum_hcd;
419 ep = usb_ep_to_dummy_ep(_ep);
420 if (!_ep || !desc || ep->desc || _ep->name == ep0name
421 || desc->bDescriptorType != USB_DT_ENDPOINT)
423 dum = ep_to_dummy(ep);
427 dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
428 if (!is_enabled(dum_hcd))
432 * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the
433 * maximum packet size.
434 * For SS devices the wMaxPacketSize is limited by 1024.
436 max = usb_endpoint_maxp(desc) & 0x7ff;
438 /* drivers must not request bad settings, since lower levels
439 * (hardware or its drivers) may not check. some endpoints
440 * can't do iso, many have maxpacket limitations, etc.
442 * since this "hardware" driver is here to help debugging, we
443 * have some extra sanity checks. (there could be more though,
444 * especially for "ep9out" style fixed function ones.)
447 switch (usb_endpoint_type(desc)) {
448 case USB_ENDPOINT_XFER_BULK:
449 if (strstr(ep->ep.name, "-iso")
450 || strstr(ep->ep.name, "-int")) {
453 switch (dum->gadget.speed) {
454 case USB_SPEED_SUPER:
463 if (max == 8 || max == 16 || max == 32 || max == 64)
464 /* we'll fake any legal size */
466 /* save a return statement */
471 case USB_ENDPOINT_XFER_INT:
472 if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
474 /* real hardware might not handle all packet sizes */
475 switch (dum->gadget.speed) {
476 case USB_SPEED_SUPER:
480 /* save a return statement */
484 /* save a return statement */
491 case USB_ENDPOINT_XFER_ISOC:
492 if (strstr(ep->ep.name, "-bulk")
493 || strstr(ep->ep.name, "-int"))
495 /* real hardware might not handle all packet sizes */
496 switch (dum->gadget.speed) {
497 case USB_SPEED_SUPER:
501 /* save a return statement */
505 /* save a return statement */
511 /* few chips support control except on ep0 */
515 _ep->maxpacket = max;
516 if (usb_ss_max_streams(_ep->comp_desc)) {
517 if (!usb_endpoint_xfer_bulk(desc)) {
518 dev_err(udc_dev(dum), "Can't enable stream support on "
519 "non-bulk ep %s\n", _ep->name);
526 dev_dbg(udc_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d stream %s\n",
528 desc->bEndpointAddress & 0x0f,
529 (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
531 switch (usb_endpoint_type(desc)) {
532 case USB_ENDPOINT_XFER_BULK:
535 case USB_ENDPOINT_XFER_ISOC:
538 case USB_ENDPOINT_XFER_INT:
545 max, ep->stream_en ? "enabled" : "disabled");
547 /* at this point real hardware should be NAKing transfers
548 * to that endpoint, until a buffer is queued to it.
550 ep->halted = ep->wedged = 0;
556 static int dummy_disable(struct usb_ep *_ep)
563 ep = usb_ep_to_dummy_ep(_ep);
564 if (!_ep || !ep->desc || _ep->name == ep0name)
566 dum = ep_to_dummy(ep);
568 spin_lock_irqsave(&dum->lock, flags);
573 spin_unlock_irqrestore(&dum->lock, flags);
575 dev_dbg(udc_dev(dum), "disabled %s\n", _ep->name);
579 static struct usb_request *dummy_alloc_request(struct usb_ep *_ep,
583 struct dummy_request *req;
587 ep = usb_ep_to_dummy_ep(_ep);
589 req = kzalloc(sizeof(*req), mem_flags);
592 INIT_LIST_HEAD(&req->queue);
596 static void dummy_free_request(struct usb_ep *_ep, struct usb_request *_req)
598 struct dummy_request *req;
605 req = usb_request_to_dummy_request(_req);
606 WARN_ON(!list_empty(&req->queue));
610 static void fifo_complete(struct usb_ep *ep, struct usb_request *req)
614 static int dummy_queue(struct usb_ep *_ep, struct usb_request *_req,
618 struct dummy_request *req;
620 struct dummy_hcd *dum_hcd;
623 req = usb_request_to_dummy_request(_req);
624 if (!_req || !list_empty(&req->queue) || !_req->complete)
627 ep = usb_ep_to_dummy_ep(_ep);
628 if (!_ep || (!ep->desc && _ep->name != ep0name))
631 dum = ep_to_dummy(ep);
632 dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
633 if (!dum->driver || !is_enabled(dum_hcd))
637 dev_dbg(udc_dev(dum), "ep %p queue req %p to %s, len %d buf %p\n",
638 ep, _req, _ep->name, _req->length, _req->buf);
640 _req->status = -EINPROGRESS;
642 spin_lock_irqsave(&dum->lock, flags);
644 /* implement an emulated single-request FIFO */
645 if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
646 list_empty(&dum->fifo_req.queue) &&
647 list_empty(&ep->queue) &&
648 _req->length <= FIFO_SIZE) {
649 req = &dum->fifo_req;
651 req->req.buf = dum->fifo_buf;
652 memcpy(dum->fifo_buf, _req->buf, _req->length);
653 req->req.context = dum;
654 req->req.complete = fifo_complete;
656 list_add_tail(&req->queue, &ep->queue);
657 spin_unlock(&dum->lock);
658 _req->actual = _req->length;
660 _req->complete(_ep, _req);
661 spin_lock(&dum->lock);
663 list_add_tail(&req->queue, &ep->queue);
664 spin_unlock_irqrestore(&dum->lock, flags);
666 /* real hardware would likely enable transfers here, in case
667 * it'd been left NAKing.
672 static int dummy_dequeue(struct usb_ep *_ep, struct usb_request *_req)
676 int retval = -EINVAL;
678 struct dummy_request *req = NULL;
682 ep = usb_ep_to_dummy_ep(_ep);
683 dum = ep_to_dummy(ep);
688 local_irq_save(flags);
689 spin_lock(&dum->lock);
690 list_for_each_entry(req, &ep->queue, queue) {
691 if (&req->req == _req) {
692 list_del_init(&req->queue);
693 _req->status = -ECONNRESET;
698 spin_unlock(&dum->lock);
701 dev_dbg(udc_dev(dum),
702 "dequeued req %p from %s, len %d buf %p\n",
703 req, _ep->name, _req->length, _req->buf);
704 _req->complete(_ep, _req);
706 local_irq_restore(flags);
711 dummy_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
718 ep = usb_ep_to_dummy_ep(_ep);
719 dum = ep_to_dummy(ep);
723 ep->halted = ep->wedged = 0;
724 else if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
725 !list_empty(&ep->queue))
732 /* FIXME clear emulated data toggle too */
737 dummy_set_halt(struct usb_ep *_ep, int value)
739 return dummy_set_halt_and_wedge(_ep, value, 0);
742 static int dummy_set_wedge(struct usb_ep *_ep)
744 if (!_ep || _ep->name == ep0name)
746 return dummy_set_halt_and_wedge(_ep, 1, 1);
749 static const struct usb_ep_ops dummy_ep_ops = {
750 .enable = dummy_enable,
751 .disable = dummy_disable,
753 .alloc_request = dummy_alloc_request,
754 .free_request = dummy_free_request,
756 .queue = dummy_queue,
757 .dequeue = dummy_dequeue,
759 .set_halt = dummy_set_halt,
760 .set_wedge = dummy_set_wedge,
763 /*-------------------------------------------------------------------------*/
765 /* there are both host and device side versions of this call ... */
766 static int dummy_g_get_frame(struct usb_gadget *_gadget)
770 do_gettimeofday(&tv);
771 return tv.tv_usec / 1000;
774 static int dummy_wakeup(struct usb_gadget *_gadget)
776 struct dummy_hcd *dum_hcd;
778 dum_hcd = gadget_to_dummy_hcd(_gadget);
779 if (!(dum_hcd->dum->devstatus & ((1 << USB_DEVICE_B_HNP_ENABLE)
780 | (1 << USB_DEVICE_REMOTE_WAKEUP))))
782 if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0)
784 if ((dum_hcd->port_status & USB_PORT_STAT_SUSPEND) == 0 &&
785 dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
788 /* FIXME: What if the root hub is suspended but the port isn't? */
790 /* hub notices our request, issues downstream resume, etc */
791 dum_hcd->resuming = 1;
792 dum_hcd->re_timeout = jiffies + msecs_to_jiffies(20);
793 mod_timer(&dummy_hcd_to_hcd(dum_hcd)->rh_timer, dum_hcd->re_timeout);
797 static int dummy_set_selfpowered(struct usb_gadget *_gadget, int value)
801 dum = gadget_to_dummy_hcd(_gadget)->dum;
803 dum->devstatus |= (1 << USB_DEVICE_SELF_POWERED);
805 dum->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
809 static void dummy_udc_update_ep0(struct dummy *dum)
811 if (dum->gadget.speed == USB_SPEED_SUPER)
812 dum->ep[0].ep.maxpacket = 9;
814 dum->ep[0].ep.maxpacket = 64;
817 static int dummy_pullup(struct usb_gadget *_gadget, int value)
819 struct dummy_hcd *dum_hcd;
823 dum = gadget_dev_to_dummy(&_gadget->dev);
825 if (value && dum->driver) {
826 if (mod_data.is_super_speed)
827 dum->gadget.speed = dum->driver->max_speed;
828 else if (mod_data.is_high_speed)
829 dum->gadget.speed = min_t(u8, USB_SPEED_HIGH,
830 dum->driver->max_speed);
832 dum->gadget.speed = USB_SPEED_FULL;
833 dummy_udc_update_ep0(dum);
835 if (dum->gadget.speed < dum->driver->max_speed)
836 dev_dbg(udc_dev(dum), "This device can perform faster"
837 " if you connect it to a %s port...\n",
838 usb_speed_string(dum->driver->max_speed));
840 dum_hcd = gadget_to_dummy_hcd(_gadget);
842 spin_lock_irqsave(&dum->lock, flags);
843 dum->pullup = (value != 0);
844 set_link_state(dum_hcd);
845 spin_unlock_irqrestore(&dum->lock, flags);
847 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
851 static int dummy_udc_start(struct usb_gadget *g,
852 struct usb_gadget_driver *driver);
853 static int dummy_udc_stop(struct usb_gadget *g,
854 struct usb_gadget_driver *driver);
856 static const struct usb_gadget_ops dummy_ops = {
857 .get_frame = dummy_g_get_frame,
858 .wakeup = dummy_wakeup,
859 .set_selfpowered = dummy_set_selfpowered,
860 .pullup = dummy_pullup,
861 .udc_start = dummy_udc_start,
862 .udc_stop = dummy_udc_stop,
865 /*-------------------------------------------------------------------------*/
867 /* "function" sysfs attribute */
868 static ssize_t show_function(struct device *dev, struct device_attribute *attr,
871 struct dummy *dum = gadget_dev_to_dummy(dev);
873 if (!dum->driver || !dum->driver->function)
875 return scnprintf(buf, PAGE_SIZE, "%s\n", dum->driver->function);
877 static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
879 /*-------------------------------------------------------------------------*/
882 * Driver registration/unregistration.
884 * This is basically hardware-specific; there's usually only one real USB
885 * device (not host) controller since that's how USB devices are intended
886 * to work. So most implementations of these api calls will rely on the
887 * fact that only one driver will ever bind to the hardware. But curious
888 * hardware can be built with discrete components, so the gadget API doesn't
889 * require that assumption.
891 * For this emulator, it might be convenient to create a usb slave device
892 * for each driver that registers: just add to a big root hub.
895 static int dummy_udc_start(struct usb_gadget *g,
896 struct usb_gadget_driver *driver)
898 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g);
899 struct dummy *dum = dum_hcd->dum;
901 if (driver->max_speed == USB_SPEED_UNKNOWN)
905 * SLAVE side init ... the layer above hardware, which
906 * can't enumerate without help from the driver we're binding.
911 dum->driver = driver;
912 dev_dbg(udc_dev(dum), "binding gadget driver '%s'\n",
913 driver->driver.name);
917 static int dummy_udc_stop(struct usb_gadget *g,
918 struct usb_gadget_driver *driver)
920 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g);
921 struct dummy *dum = dum_hcd->dum;
923 dev_dbg(udc_dev(dum), "unregister gadget driver '%s'\n",
924 driver->driver.name);
933 /* The gadget structure is stored inside the hcd structure and will be
934 * released along with it. */
935 static void dummy_gadget_release(struct device *dev)
940 static void init_dummy_udc_hw(struct dummy *dum)
944 INIT_LIST_HEAD(&dum->gadget.ep_list);
945 for (i = 0; i < DUMMY_ENDPOINTS; i++) {
946 struct dummy_ep *ep = &dum->ep[i];
950 ep->ep.name = ep_name[i];
951 ep->ep.ops = &dummy_ep_ops;
952 list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list);
953 ep->halted = ep->wedged = ep->already_seen =
955 ep->ep.maxpacket = ~0;
956 ep->ep.max_streams = 16;
957 ep->last_io = jiffies;
958 ep->gadget = &dum->gadget;
960 INIT_LIST_HEAD(&ep->queue);
963 dum->gadget.ep0 = &dum->ep[0].ep;
964 list_del_init(&dum->ep[0].ep.ep_list);
965 INIT_LIST_HEAD(&dum->fifo_req.queue);
967 #ifdef CONFIG_USB_OTG
968 dum->gadget.is_otg = 1;
972 static int dummy_udc_probe(struct platform_device *pdev)
974 struct dummy *dum = &the_controller;
977 dum->gadget.name = gadget_name;
978 dum->gadget.ops = &dummy_ops;
979 dum->gadget.max_speed = USB_SPEED_SUPER;
981 dev_set_name(&dum->gadget.dev, "gadget");
982 dum->gadget.dev.parent = &pdev->dev;
983 dum->gadget.dev.release = dummy_gadget_release;
984 rc = device_register(&dum->gadget.dev);
986 put_device(&dum->gadget.dev);
990 init_dummy_udc_hw(dum);
992 rc = usb_add_gadget_udc(&pdev->dev, &dum->gadget);
996 rc = device_create_file(&dum->gadget.dev, &dev_attr_function);
999 platform_set_drvdata(pdev, dum);
1003 usb_del_gadget_udc(&dum->gadget);
1005 device_unregister(&dum->gadget.dev);
1009 static int dummy_udc_remove(struct platform_device *pdev)
1011 struct dummy *dum = platform_get_drvdata(pdev);
1013 usb_del_gadget_udc(&dum->gadget);
1014 platform_set_drvdata(pdev, NULL);
1015 device_remove_file(&dum->gadget.dev, &dev_attr_function);
1016 device_unregister(&dum->gadget.dev);
1020 static void dummy_udc_pm(struct dummy *dum, struct dummy_hcd *dum_hcd,
1023 spin_lock_irq(&dum->lock);
1024 dum->udc_suspended = suspend;
1025 set_link_state(dum_hcd);
1026 spin_unlock_irq(&dum->lock);
1029 static int dummy_udc_suspend(struct platform_device *pdev, pm_message_t state)
1031 struct dummy *dum = platform_get_drvdata(pdev);
1032 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
1034 dev_dbg(&pdev->dev, "%s\n", __func__);
1035 dummy_udc_pm(dum, dum_hcd, 1);
1036 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
1040 static int dummy_udc_resume(struct platform_device *pdev)
1042 struct dummy *dum = platform_get_drvdata(pdev);
1043 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
1045 dev_dbg(&pdev->dev, "%s\n", __func__);
1046 dummy_udc_pm(dum, dum_hcd, 0);
1047 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
1051 static struct platform_driver dummy_udc_driver = {
1052 .probe = dummy_udc_probe,
1053 .remove = dummy_udc_remove,
1054 .suspend = dummy_udc_suspend,
1055 .resume = dummy_udc_resume,
1057 .name = (char *) gadget_name,
1058 .owner = THIS_MODULE,
1062 /*-------------------------------------------------------------------------*/
1064 static unsigned int dummy_get_ep_idx(const struct usb_endpoint_descriptor *desc)
1068 index = usb_endpoint_num(desc) << 1;
1069 if (usb_endpoint_dir_in(desc))
1074 /* MASTER/HOST SIDE DRIVER
1076 * this uses the hcd framework to hook up to host side drivers.
1077 * its root hub will only have one device, otherwise it acts like
1078 * a normal host controller.
1080 * when urbs are queued, they're just stuck on a list that we
1081 * scan in a timer callback. that callback connects writes from
1082 * the host with reads from the device, and so on, based on the
1086 static int dummy_ep_stream_en(struct dummy_hcd *dum_hcd, struct urb *urb)
1088 const struct usb_endpoint_descriptor *desc = &urb->ep->desc;
1091 if (!usb_endpoint_xfer_bulk(desc))
1094 index = dummy_get_ep_idx(desc);
1095 return (1 << index) & dum_hcd->stream_en_ep;
1099 * The max stream number is saved as a nibble so for the 30 possible endpoints
1100 * we only 15 bytes of memory. Therefore we are limited to max 16 streams (0
1101 * means we use only 1 stream). The maximum according to the spec is 16bit so
1102 * if the 16 stream limit is about to go, the array size should be incremented
1103 * to 30 elements of type u16.
1105 static int get_max_streams_for_pipe(struct dummy_hcd *dum_hcd,
1110 max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)];
1111 if (usb_pipeout(pipe))
1119 static void set_max_streams_for_pipe(struct dummy_hcd *dum_hcd,
1120 unsigned int pipe, unsigned int streams)
1125 max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)];
1126 if (usb_pipeout(pipe)) {
1130 max_streams &= 0xf0;
1132 max_streams |= streams;
1133 dum_hcd->num_stream[usb_pipeendpoint(pipe)] = max_streams;
1136 static int dummy_validate_stream(struct dummy_hcd *dum_hcd, struct urb *urb)
1138 unsigned int max_streams;
1141 enabled = dummy_ep_stream_en(dum_hcd, urb);
1142 if (!urb->stream_id) {
1150 max_streams = get_max_streams_for_pipe(dum_hcd,
1151 usb_pipeendpoint(urb->pipe));
1152 if (urb->stream_id > max_streams) {
1153 dev_err(dummy_dev(dum_hcd), "Stream id %d is out of range.\n",
1161 static int dummy_urb_enqueue(
1162 struct usb_hcd *hcd,
1166 struct dummy_hcd *dum_hcd;
1168 unsigned long flags;
1171 urbp = kmalloc(sizeof *urbp, mem_flags);
1175 urbp->miter_started = 0;
1177 dum_hcd = hcd_to_dummy_hcd(hcd);
1178 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
1180 rc = dummy_validate_stream(dum_hcd, urb);
1186 rc = usb_hcd_link_urb_to_ep(hcd, urb);
1192 if (!dum_hcd->udev) {
1193 dum_hcd->udev = urb->dev;
1194 usb_get_dev(dum_hcd->udev);
1195 } else if (unlikely(dum_hcd->udev != urb->dev))
1196 dev_err(dummy_dev(dum_hcd), "usb_device address has changed!\n");
1198 list_add_tail(&urbp->urbp_list, &dum_hcd->urbp_list);
1200 if (usb_pipetype(urb->pipe) == PIPE_CONTROL)
1201 urb->error_count = 1; /* mark as a new urb */
1203 /* kick the scheduler, it'll do the rest */
1204 if (!timer_pending(&dum_hcd->timer))
1205 mod_timer(&dum_hcd->timer, jiffies + 1);
1208 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
1212 static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
1214 struct dummy_hcd *dum_hcd;
1215 unsigned long flags;
1218 /* giveback happens automatically in timer callback,
1219 * so make sure the callback happens */
1220 dum_hcd = hcd_to_dummy_hcd(hcd);
1221 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
1223 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
1224 if (!rc && dum_hcd->rh_state != DUMMY_RH_RUNNING &&
1225 !list_empty(&dum_hcd->urbp_list))
1226 mod_timer(&dum_hcd->timer, jiffies);
1228 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
1232 static int dummy_perform_transfer(struct urb *urb, struct dummy_request *req,
1236 struct urbp *urbp = urb->hcpriv;
1238 struct sg_mapping_iter *miter = &urbp->miter;
1243 to_host = usb_pipein(urb->pipe);
1244 rbuf = req->req.buf + req->req.actual;
1246 if (!urb->num_sgs) {
1247 ubuf = urb->transfer_buffer + urb->actual_length;
1249 memcpy(ubuf, rbuf, len);
1251 memcpy(rbuf, ubuf, len);
1255 if (!urbp->miter_started) {
1256 u32 flags = SG_MITER_ATOMIC;
1259 flags |= SG_MITER_TO_SG;
1261 flags |= SG_MITER_FROM_SG;
1263 sg_miter_start(miter, urb->sg, urb->num_sgs, flags);
1264 urbp->miter_started = 1;
1266 next_sg = sg_miter_next(miter);
1267 if (next_sg == false) {
1273 this_sg = min_t(u32, len, miter->length);
1274 miter->consumed = this_sg;
1278 memcpy(ubuf, rbuf, this_sg);
1280 memcpy(rbuf, ubuf, this_sg);
1285 next_sg = sg_miter_next(miter);
1286 if (next_sg == false) {
1294 sg_miter_stop(miter);
1298 /* transfer up to a frame's worth; caller must own lock */
1299 static int transfer(struct dummy_hcd *dum_hcd, struct urb *urb,
1300 struct dummy_ep *ep, int limit, int *status)
1302 struct dummy *dum = dum_hcd->dum;
1303 struct dummy_request *req;
1306 /* if there's no request queued, the device is NAKing; return */
1307 list_for_each_entry(req, &ep->queue, queue) {
1308 unsigned host_len, dev_len, len;
1309 int is_short, to_host;
1312 if (dummy_ep_stream_en(dum_hcd, urb)) {
1313 if ((urb->stream_id != req->req.stream_id))
1317 /* 1..N packets of ep->ep.maxpacket each ... the last one
1318 * may be short (including zero length).
1320 * writer can send a zlp explicitly (length 0) or implicitly
1321 * (length mod maxpacket zero, and 'zero' flag); they always
1324 host_len = urb->transfer_buffer_length - urb->actual_length;
1325 dev_len = req->req.length - req->req.actual;
1326 len = min(host_len, dev_len);
1328 /* FIXME update emulated data toggle too */
1330 to_host = usb_pipein(urb->pipe);
1331 if (unlikely(len == 0))
1334 /* not enough bandwidth left? */
1335 if (limit < ep->ep.maxpacket && limit < len)
1337 len = min_t(unsigned, len, limit);
1341 /* use an extra pass for the final short packet */
1342 if (len > ep->ep.maxpacket) {
1344 len -= (len % ep->ep.maxpacket);
1346 is_short = (len % ep->ep.maxpacket) != 0;
1348 len = dummy_perform_transfer(urb, req, len);
1350 ep->last_io = jiffies;
1352 req->req.status = len;
1355 urb->actual_length += len;
1356 req->req.actual += len;
1360 /* short packets terminate, maybe with overflow/underflow.
1361 * it's only really an error to write too much.
1363 * partially filling a buffer optionally blocks queue advances
1364 * (so completion handlers can clean up the queue) but we don't
1365 * need to emulate such data-in-flight.
1368 if (host_len == dev_len) {
1369 req->req.status = 0;
1371 } else if (to_host) {
1372 req->req.status = 0;
1373 if (dev_len > host_len)
1374 *status = -EOVERFLOW;
1377 } else if (!to_host) {
1379 if (host_len > dev_len)
1380 req->req.status = -EOVERFLOW;
1382 req->req.status = 0;
1385 /* many requests terminate without a short packet */
1387 if (req->req.length == req->req.actual
1389 req->req.status = 0;
1390 if (urb->transfer_buffer_length == urb->actual_length
1391 && !(urb->transfer_flags
1396 /* device side completion --> continuable */
1397 if (req->req.status != -EINPROGRESS) {
1398 list_del_init(&req->queue);
1400 spin_unlock(&dum->lock);
1401 req->req.complete(&ep->ep, &req->req);
1402 spin_lock(&dum->lock);
1404 /* requests might have been unlinked... */
1408 /* host side completion --> terminate */
1409 if (*status != -EINPROGRESS)
1412 /* rescan to continue with any other queued i/o */
1419 static int periodic_bytes(struct dummy *dum, struct dummy_ep *ep)
1421 int limit = ep->ep.maxpacket;
1423 if (dum->gadget.speed == USB_SPEED_HIGH) {
1426 /* high bandwidth mode */
1427 tmp = usb_endpoint_maxp(ep->desc);
1428 tmp = (tmp >> 11) & 0x03;
1429 tmp *= 8 /* applies to entire frame */;
1430 limit += limit * tmp;
1432 if (dum->gadget.speed == USB_SPEED_SUPER) {
1433 switch (usb_endpoint_type(ep->desc)) {
1434 case USB_ENDPOINT_XFER_ISOC:
1435 /* Sec. 4.4.8.2 USB3.0 Spec */
1436 limit = 3 * 16 * 1024 * 8;
1438 case USB_ENDPOINT_XFER_INT:
1439 /* Sec. 4.4.7.2 USB3.0 Spec */
1440 limit = 3 * 1024 * 8;
1442 case USB_ENDPOINT_XFER_BULK:
1450 #define is_active(dum_hcd) ((dum_hcd->port_status & \
1451 (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE | \
1452 USB_PORT_STAT_SUSPEND)) \
1453 == (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE))
1455 static struct dummy_ep *find_endpoint(struct dummy *dum, u8 address)
1459 if (!is_active((dum->gadget.speed == USB_SPEED_SUPER ?
1460 dum->ss_hcd : dum->hs_hcd)))
1462 if ((address & ~USB_DIR_IN) == 0)
1464 for (i = 1; i < DUMMY_ENDPOINTS; i++) {
1465 struct dummy_ep *ep = &dum->ep[i];
1469 if (ep->desc->bEndpointAddress == address)
1477 #define Dev_Request (USB_TYPE_STANDARD | USB_RECIP_DEVICE)
1478 #define Dev_InRequest (Dev_Request | USB_DIR_IN)
1479 #define Intf_Request (USB_TYPE_STANDARD | USB_RECIP_INTERFACE)
1480 #define Intf_InRequest (Intf_Request | USB_DIR_IN)
1481 #define Ep_Request (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT)
1482 #define Ep_InRequest (Ep_Request | USB_DIR_IN)
1486 * handle_control_request() - handles all control transfers
1487 * @dum: pointer to dummy (the_controller)
1488 * @urb: the urb request to handle
1489 * @setup: pointer to the setup data for a USB device control
1491 * @status: pointer to request handling status
1493 * Return 0 - if the request was handled
1494 * 1 - if the request wasn't handles
1495 * error code on error
1497 static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb,
1498 struct usb_ctrlrequest *setup,
1501 struct dummy_ep *ep2;
1502 struct dummy *dum = dum_hcd->dum;
1507 w_index = le16_to_cpu(setup->wIndex);
1508 w_value = le16_to_cpu(setup->wValue);
1509 switch (setup->bRequest) {
1510 case USB_REQ_SET_ADDRESS:
1511 if (setup->bRequestType != Dev_Request)
1513 dum->address = w_value;
1515 dev_dbg(udc_dev(dum), "set_address = %d\n",
1519 case USB_REQ_SET_FEATURE:
1520 if (setup->bRequestType == Dev_Request) {
1523 case USB_DEVICE_REMOTE_WAKEUP:
1525 case USB_DEVICE_B_HNP_ENABLE:
1526 dum->gadget.b_hnp_enable = 1;
1528 case USB_DEVICE_A_HNP_SUPPORT:
1529 dum->gadget.a_hnp_support = 1;
1531 case USB_DEVICE_A_ALT_HNP_SUPPORT:
1532 dum->gadget.a_alt_hnp_support = 1;
1534 case USB_DEVICE_U1_ENABLE:
1535 if (dummy_hcd_to_hcd(dum_hcd)->speed ==
1537 w_value = USB_DEV_STAT_U1_ENABLED;
1539 ret_val = -EOPNOTSUPP;
1541 case USB_DEVICE_U2_ENABLE:
1542 if (dummy_hcd_to_hcd(dum_hcd)->speed ==
1544 w_value = USB_DEV_STAT_U2_ENABLED;
1546 ret_val = -EOPNOTSUPP;
1548 case USB_DEVICE_LTM_ENABLE:
1549 if (dummy_hcd_to_hcd(dum_hcd)->speed ==
1551 w_value = USB_DEV_STAT_LTM_ENABLED;
1553 ret_val = -EOPNOTSUPP;
1556 ret_val = -EOPNOTSUPP;
1559 dum->devstatus |= (1 << w_value);
1562 } else if (setup->bRequestType == Ep_Request) {
1564 ep2 = find_endpoint(dum, w_index);
1565 if (!ep2 || ep2->ep.name == ep0name) {
1566 ret_val = -EOPNOTSUPP;
1574 case USB_REQ_CLEAR_FEATURE:
1575 if (setup->bRequestType == Dev_Request) {
1578 case USB_DEVICE_REMOTE_WAKEUP:
1579 w_value = USB_DEVICE_REMOTE_WAKEUP;
1581 case USB_DEVICE_U1_ENABLE:
1582 if (dummy_hcd_to_hcd(dum_hcd)->speed ==
1584 w_value = USB_DEV_STAT_U1_ENABLED;
1586 ret_val = -EOPNOTSUPP;
1588 case USB_DEVICE_U2_ENABLE:
1589 if (dummy_hcd_to_hcd(dum_hcd)->speed ==
1591 w_value = USB_DEV_STAT_U2_ENABLED;
1593 ret_val = -EOPNOTSUPP;
1595 case USB_DEVICE_LTM_ENABLE:
1596 if (dummy_hcd_to_hcd(dum_hcd)->speed ==
1598 w_value = USB_DEV_STAT_LTM_ENABLED;
1600 ret_val = -EOPNOTSUPP;
1603 ret_val = -EOPNOTSUPP;
1607 dum->devstatus &= ~(1 << w_value);
1610 } else if (setup->bRequestType == Ep_Request) {
1612 ep2 = find_endpoint(dum, w_index);
1614 ret_val = -EOPNOTSUPP;
1623 case USB_REQ_GET_STATUS:
1624 if (setup->bRequestType == Dev_InRequest
1625 || setup->bRequestType == Intf_InRequest
1626 || setup->bRequestType == Ep_InRequest) {
1629 * device: remote wakeup, selfpowered
1630 * interface: nothing
1633 buf = (char *)urb->transfer_buffer;
1634 if (urb->transfer_buffer_length > 0) {
1635 if (setup->bRequestType == Ep_InRequest) {
1636 ep2 = find_endpoint(dum, w_index);
1638 ret_val = -EOPNOTSUPP;
1641 buf[0] = ep2->halted;
1642 } else if (setup->bRequestType ==
1644 buf[0] = (u8)dum->devstatus;
1648 if (urb->transfer_buffer_length > 1)
1650 urb->actual_length = min_t(u32, 2,
1651 urb->transfer_buffer_length);
1660 /* drive both sides of the transfers; looks like irq handlers to
1661 * both drivers except the callbacks aren't in_irq().
1663 static void dummy_timer(unsigned long _dum_hcd)
1665 struct dummy_hcd *dum_hcd = (struct dummy_hcd *) _dum_hcd;
1666 struct dummy *dum = dum_hcd->dum;
1667 struct urbp *urbp, *tmp;
1668 unsigned long flags;
1672 /* simplistic model for one frame's bandwidth */
1673 switch (dum->gadget.speed) {
1675 total = 8/*bytes*/ * 12/*packets*/;
1677 case USB_SPEED_FULL:
1678 total = 64/*bytes*/ * 19/*packets*/;
1680 case USB_SPEED_HIGH:
1681 total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/;
1683 case USB_SPEED_SUPER:
1684 /* Bus speed is 500000 bytes/ms, so use a little less */
1688 dev_err(dummy_dev(dum_hcd), "bogus device speed\n");
1692 /* FIXME if HZ != 1000 this will probably misbehave ... */
1694 /* look at each urb queued by the host side driver */
1695 spin_lock_irqsave(&dum->lock, flags);
1697 if (!dum_hcd->udev) {
1698 dev_err(dummy_dev(dum_hcd),
1699 "timer fired with no URBs pending?\n");
1700 spin_unlock_irqrestore(&dum->lock, flags);
1704 for (i = 0; i < DUMMY_ENDPOINTS; i++) {
1707 dum->ep[i].already_seen = 0;
1711 list_for_each_entry_safe(urbp, tmp, &dum_hcd->urbp_list, urbp_list) {
1713 struct dummy_request *req;
1715 struct dummy_ep *ep = NULL;
1717 int status = -EINPROGRESS;
1722 else if (dum_hcd->rh_state != DUMMY_RH_RUNNING)
1724 type = usb_pipetype(urb->pipe);
1726 /* used up this frame's non-periodic bandwidth?
1727 * FIXME there's infinite bandwidth for control and
1728 * periodic transfers ... unrealistic.
1730 if (total <= 0 && type == PIPE_BULK)
1733 /* find the gadget's ep for this request (if configured) */
1734 address = usb_pipeendpoint (urb->pipe);
1735 if (usb_pipein(urb->pipe))
1736 address |= USB_DIR_IN;
1737 ep = find_endpoint(dum, address);
1739 /* set_configuration() disagreement */
1740 dev_dbg(dummy_dev(dum_hcd),
1741 "no ep configured for urb %p\n",
1747 if (ep->already_seen)
1749 ep->already_seen = 1;
1750 if (ep == &dum->ep[0] && urb->error_count) {
1751 ep->setup_stage = 1; /* a new urb */
1752 urb->error_count = 0;
1754 if (ep->halted && !ep->setup_stage) {
1755 /* NOTE: must not be iso! */
1756 dev_dbg(dummy_dev(dum_hcd), "ep %s halted, urb %p\n",
1761 /* FIXME make sure both ends agree on maxpacket */
1763 /* handle control requests */
1764 if (ep == &dum->ep[0] && ep->setup_stage) {
1765 struct usb_ctrlrequest setup;
1768 setup = *(struct usb_ctrlrequest *) urb->setup_packet;
1769 /* paranoia, in case of stale queued data */
1770 list_for_each_entry(req, &ep->queue, queue) {
1771 list_del_init(&req->queue);
1772 req->req.status = -EOVERFLOW;
1773 dev_dbg(udc_dev(dum), "stale req = %p\n",
1776 spin_unlock(&dum->lock);
1777 req->req.complete(&ep->ep, &req->req);
1778 spin_lock(&dum->lock);
1779 ep->already_seen = 0;
1783 /* gadget driver never sees set_address or operations
1784 * on standard feature flags. some hardware doesn't
1787 ep->last_io = jiffies;
1788 ep->setup_stage = 0;
1791 value = handle_control_request(dum_hcd, urb, &setup,
1794 /* gadget driver handles all other requests. block
1795 * until setup() returns; no reentrancy issues etc.
1798 spin_unlock(&dum->lock);
1799 value = dum->driver->setup(&dum->gadget,
1801 spin_lock(&dum->lock);
1804 /* no delays (max 64KB data stage) */
1806 goto treat_control_like_bulk;
1808 /* error, see below */
1812 if (value != -EOPNOTSUPP)
1813 dev_dbg(udc_dev(dum),
1817 urb->actual_length = 0;
1823 /* non-control requests */
1825 switch (usb_pipetype(urb->pipe)) {
1826 case PIPE_ISOCHRONOUS:
1827 /* FIXME is it urb->interval since the last xfer?
1828 * use urb->iso_frame_desc[i].
1829 * complete whether or not ep has requests queued.
1830 * report random errors, to debug drivers.
1832 limit = max(limit, periodic_bytes(dum, ep));
1836 case PIPE_INTERRUPT:
1837 /* FIXME is it urb->interval since the last xfer?
1838 * this almost certainly polls too fast.
1840 limit = max(limit, periodic_bytes(dum, ep));
1844 treat_control_like_bulk:
1845 ep->last_io = jiffies;
1846 total = transfer(dum_hcd, urb, ep, limit, &status);
1850 /* incomplete transfer? */
1851 if (status == -EINPROGRESS)
1855 list_del(&urbp->urbp_list);
1858 ep->already_seen = ep->setup_stage = 0;
1860 usb_hcd_unlink_urb_from_ep(dummy_hcd_to_hcd(dum_hcd), urb);
1861 spin_unlock(&dum->lock);
1862 usb_hcd_giveback_urb(dummy_hcd_to_hcd(dum_hcd), urb, status);
1863 spin_lock(&dum->lock);
1868 if (list_empty(&dum_hcd->urbp_list)) {
1869 usb_put_dev(dum_hcd->udev);
1870 dum_hcd->udev = NULL;
1871 } else if (dum_hcd->rh_state == DUMMY_RH_RUNNING) {
1872 /* want a 1 msec delay here */
1873 mod_timer(&dum_hcd->timer, jiffies + msecs_to_jiffies(1));
1876 spin_unlock_irqrestore(&dum->lock, flags);
1879 /*-------------------------------------------------------------------------*/
1881 #define PORT_C_MASK \
1882 ((USB_PORT_STAT_C_CONNECTION \
1883 | USB_PORT_STAT_C_ENABLE \
1884 | USB_PORT_STAT_C_SUSPEND \
1885 | USB_PORT_STAT_C_OVERCURRENT \
1886 | USB_PORT_STAT_C_RESET) << 16)
1888 static int dummy_hub_status(struct usb_hcd *hcd, char *buf)
1890 struct dummy_hcd *dum_hcd;
1891 unsigned long flags;
1894 dum_hcd = hcd_to_dummy_hcd(hcd);
1896 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
1897 if (!HCD_HW_ACCESSIBLE(hcd))
1900 if (dum_hcd->resuming && time_after_eq(jiffies, dum_hcd->re_timeout)) {
1901 dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
1902 dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
1903 set_link_state(dum_hcd);
1906 if ((dum_hcd->port_status & PORT_C_MASK) != 0) {
1908 dev_dbg(dummy_dev(dum_hcd), "port status 0x%08x has changes\n",
1909 dum_hcd->port_status);
1911 if (dum_hcd->rh_state == DUMMY_RH_SUSPENDED)
1912 usb_hcd_resume_root_hub(hcd);
1915 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
1919 /* usb 3.0 root hub device descriptor */
1921 struct usb_bos_descriptor bos;
1922 struct usb_ss_cap_descriptor ss_cap;
1923 } __packed usb3_bos_desc = {
1926 .bLength = USB_DT_BOS_SIZE,
1927 .bDescriptorType = USB_DT_BOS,
1928 .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)),
1929 .bNumDeviceCaps = 1,
1932 .bLength = USB_DT_USB_SS_CAP_SIZE,
1933 .bDescriptorType = USB_DT_DEVICE_CAPABILITY,
1934 .bDevCapabilityType = USB_SS_CAP_TYPE,
1935 .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION),
1936 .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION),
1941 ss_hub_descriptor(struct usb_hub_descriptor *desc)
1943 memset(desc, 0, sizeof *desc);
1944 desc->bDescriptorType = 0x2a;
1945 desc->bDescLength = 12;
1946 desc->wHubCharacteristics = cpu_to_le16(0x0001);
1947 desc->bNbrPorts = 1;
1948 desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
1949 desc->u.ss.DeviceRemovable = 0xffff;
1952 static inline void hub_descriptor(struct usb_hub_descriptor *desc)
1954 memset(desc, 0, sizeof *desc);
1955 desc->bDescriptorType = 0x29;
1956 desc->bDescLength = 9;
1957 desc->wHubCharacteristics = cpu_to_le16(0x0001);
1958 desc->bNbrPorts = 1;
1959 desc->u.hs.DeviceRemovable[0] = 0xff;
1960 desc->u.hs.DeviceRemovable[1] = 0xff;
1963 static int dummy_hub_control(
1964 struct usb_hcd *hcd,
1971 struct dummy_hcd *dum_hcd;
1973 unsigned long flags;
1975 if (!HCD_HW_ACCESSIBLE(hcd))
1978 dum_hcd = hcd_to_dummy_hcd(hcd);
1980 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
1982 case ClearHubFeature:
1984 case ClearPortFeature:
1986 case USB_PORT_FEAT_SUSPEND:
1987 if (hcd->speed == HCD_USB3) {
1988 dev_dbg(dummy_dev(dum_hcd),
1989 "USB_PORT_FEAT_SUSPEND req not "
1990 "supported for USB 3.0 roothub\n");
1993 if (dum_hcd->port_status & USB_PORT_STAT_SUSPEND) {
1994 /* 20msec resume signaling */
1995 dum_hcd->resuming = 1;
1996 dum_hcd->re_timeout = jiffies +
1997 msecs_to_jiffies(20);
2000 case USB_PORT_FEAT_POWER:
2001 if (hcd->speed == HCD_USB3) {
2002 if (dum_hcd->port_status & USB_PORT_STAT_POWER)
2003 dev_dbg(dummy_dev(dum_hcd),
2006 if (dum_hcd->port_status &
2007 USB_SS_PORT_STAT_POWER)
2008 dev_dbg(dummy_dev(dum_hcd),
2012 dum_hcd->port_status &= ~(1 << wValue);
2013 set_link_state(dum_hcd);
2016 case GetHubDescriptor:
2017 if (hcd->speed == HCD_USB3 &&
2018 (wLength < USB_DT_SS_HUB_SIZE ||
2019 wValue != (USB_DT_SS_HUB << 8))) {
2020 dev_dbg(dummy_dev(dum_hcd),
2021 "Wrong hub descriptor type for "
2022 "USB 3.0 roothub.\n");
2025 if (hcd->speed == HCD_USB3)
2026 ss_hub_descriptor((struct usb_hub_descriptor *) buf);
2028 hub_descriptor((struct usb_hub_descriptor *) buf);
2031 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
2032 if (hcd->speed != HCD_USB3)
2035 if ((wValue >> 8) != USB_DT_BOS)
2038 memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc));
2039 retval = sizeof(usb3_bos_desc);
2043 *(__le32 *) buf = cpu_to_le32(0);
2049 /* whoever resets or resumes must GetPortStatus to
2052 if (dum_hcd->resuming &&
2053 time_after_eq(jiffies, dum_hcd->re_timeout)) {
2054 dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
2055 dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
2057 if ((dum_hcd->port_status & USB_PORT_STAT_RESET) != 0 &&
2058 time_after_eq(jiffies, dum_hcd->re_timeout)) {
2059 dum_hcd->port_status |= (USB_PORT_STAT_C_RESET << 16);
2060 dum_hcd->port_status &= ~USB_PORT_STAT_RESET;
2061 if (dum_hcd->dum->pullup) {
2062 dum_hcd->port_status |= USB_PORT_STAT_ENABLE;
2064 if (hcd->speed < HCD_USB3) {
2065 switch (dum_hcd->dum->gadget.speed) {
2066 case USB_SPEED_HIGH:
2067 dum_hcd->port_status |=
2068 USB_PORT_STAT_HIGH_SPEED;
2071 dum_hcd->dum->gadget.ep0->
2073 dum_hcd->port_status |=
2074 USB_PORT_STAT_LOW_SPEED;
2077 dum_hcd->dum->gadget.speed =
2084 set_link_state(dum_hcd);
2085 ((__le16 *) buf)[0] = cpu_to_le16(dum_hcd->port_status);
2086 ((__le16 *) buf)[1] = cpu_to_le16(dum_hcd->port_status >> 16);
2091 case SetPortFeature:
2093 case USB_PORT_FEAT_LINK_STATE:
2094 if (hcd->speed != HCD_USB3) {
2095 dev_dbg(dummy_dev(dum_hcd),
2096 "USB_PORT_FEAT_LINK_STATE req not "
2097 "supported for USB 2.0 roothub\n");
2101 * Since this is dummy we don't have an actual link so
2102 * there is nothing to do for the SET_LINK_STATE cmd
2105 case USB_PORT_FEAT_U1_TIMEOUT:
2106 case USB_PORT_FEAT_U2_TIMEOUT:
2107 /* TODO: add suspend/resume support! */
2108 if (hcd->speed != HCD_USB3) {
2109 dev_dbg(dummy_dev(dum_hcd),
2110 "USB_PORT_FEAT_U1/2_TIMEOUT req not "
2111 "supported for USB 2.0 roothub\n");
2115 case USB_PORT_FEAT_SUSPEND:
2116 /* Applicable only for USB2.0 hub */
2117 if (hcd->speed == HCD_USB3) {
2118 dev_dbg(dummy_dev(dum_hcd),
2119 "USB_PORT_FEAT_SUSPEND req not "
2120 "supported for USB 3.0 roothub\n");
2123 if (dum_hcd->active) {
2124 dum_hcd->port_status |= USB_PORT_STAT_SUSPEND;
2126 /* HNP would happen here; for now we
2127 * assume b_bus_req is always true.
2129 set_link_state(dum_hcd);
2130 if (((1 << USB_DEVICE_B_HNP_ENABLE)
2131 & dum_hcd->dum->devstatus) != 0)
2132 dev_dbg(dummy_dev(dum_hcd),
2136 case USB_PORT_FEAT_POWER:
2137 if (hcd->speed == HCD_USB3)
2138 dum_hcd->port_status |= USB_SS_PORT_STAT_POWER;
2140 dum_hcd->port_status |= USB_PORT_STAT_POWER;
2141 set_link_state(dum_hcd);
2143 case USB_PORT_FEAT_BH_PORT_RESET:
2144 /* Applicable only for USB3.0 hub */
2145 if (hcd->speed != HCD_USB3) {
2146 dev_dbg(dummy_dev(dum_hcd),
2147 "USB_PORT_FEAT_BH_PORT_RESET req not "
2148 "supported for USB 2.0 roothub\n");
2152 case USB_PORT_FEAT_RESET:
2153 /* if it's already enabled, disable */
2154 if (hcd->speed == HCD_USB3) {
2155 dum_hcd->port_status = 0;
2156 dum_hcd->port_status =
2157 (USB_SS_PORT_STAT_POWER |
2158 USB_PORT_STAT_CONNECTION |
2159 USB_PORT_STAT_RESET);
2161 dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE
2162 | USB_PORT_STAT_LOW_SPEED
2163 | USB_PORT_STAT_HIGH_SPEED);
2165 * We want to reset device status. All but the
2166 * Self powered feature
2168 dum_hcd->dum->devstatus &=
2169 (1 << USB_DEVICE_SELF_POWERED);
2171 * FIXME USB3.0: what is the correct reset signaling
2172 * interval? Is it still 50msec as for HS?
2174 dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
2177 if (hcd->speed == HCD_USB3) {
2178 if ((dum_hcd->port_status &
2179 USB_SS_PORT_STAT_POWER) != 0) {
2180 dum_hcd->port_status |= (1 << wValue);
2181 set_link_state(dum_hcd);
2184 if ((dum_hcd->port_status &
2185 USB_PORT_STAT_POWER) != 0) {
2186 dum_hcd->port_status |= (1 << wValue);
2187 set_link_state(dum_hcd);
2191 case GetPortErrorCount:
2192 if (hcd->speed != HCD_USB3) {
2193 dev_dbg(dummy_dev(dum_hcd),
2194 "GetPortErrorCount req not "
2195 "supported for USB 2.0 roothub\n");
2198 /* We'll always return 0 since this is a dummy hub */
2199 *(__le32 *) buf = cpu_to_le32(0);
2202 if (hcd->speed != HCD_USB3) {
2203 dev_dbg(dummy_dev(dum_hcd),
2204 "SetHubDepth req not supported for "
2205 "USB 2.0 roothub\n");
2210 dev_dbg(dummy_dev(dum_hcd),
2211 "hub control req%04x v%04x i%04x l%d\n",
2212 typeReq, wValue, wIndex, wLength);
2214 /* "protocol stall" on error */
2217 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
2219 if ((dum_hcd->port_status & PORT_C_MASK) != 0)
2220 usb_hcd_poll_rh_status(hcd);
2224 static int dummy_bus_suspend(struct usb_hcd *hcd)
2226 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
2228 dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
2230 spin_lock_irq(&dum_hcd->dum->lock);
2231 dum_hcd->rh_state = DUMMY_RH_SUSPENDED;
2232 set_link_state(dum_hcd);
2233 hcd->state = HC_STATE_SUSPENDED;
2234 spin_unlock_irq(&dum_hcd->dum->lock);
2238 static int dummy_bus_resume(struct usb_hcd *hcd)
2240 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
2243 dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
2245 spin_lock_irq(&dum_hcd->dum->lock);
2246 if (!HCD_HW_ACCESSIBLE(hcd)) {
2249 dum_hcd->rh_state = DUMMY_RH_RUNNING;
2250 set_link_state(dum_hcd);
2251 if (!list_empty(&dum_hcd->urbp_list))
2252 mod_timer(&dum_hcd->timer, jiffies);
2253 hcd->state = HC_STATE_RUNNING;
2255 spin_unlock_irq(&dum_hcd->dum->lock);
2259 /*-------------------------------------------------------------------------*/
2261 static inline ssize_t show_urb(char *buf, size_t size, struct urb *urb)
2263 int ep = usb_pipeendpoint(urb->pipe);
2265 return snprintf(buf, size,
2266 "urb/%p %s ep%d%s%s len %d/%d\n",
2269 switch (urb->dev->speed) {
2273 case USB_SPEED_FULL:
2276 case USB_SPEED_HIGH:
2279 case USB_SPEED_SUPER:
2286 ep, ep ? (usb_pipein(urb->pipe) ? "in" : "out") : "",
2288 switch (usb_pipetype(urb->pipe)) { \
2289 case PIPE_CONTROL: \
2295 case PIPE_INTERRUPT: \
2302 urb->actual_length, urb->transfer_buffer_length);
2305 static ssize_t show_urbs(struct device *dev, struct device_attribute *attr,
2308 struct usb_hcd *hcd = dev_get_drvdata(dev);
2309 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
2312 unsigned long flags;
2314 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
2315 list_for_each_entry(urbp, &dum_hcd->urbp_list, urbp_list) {
2318 temp = show_urb(buf, PAGE_SIZE - size, urbp->urb);
2322 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
2326 static DEVICE_ATTR(urbs, S_IRUGO, show_urbs, NULL);
2328 static int dummy_start_ss(struct dummy_hcd *dum_hcd)
2330 init_timer(&dum_hcd->timer);
2331 dum_hcd->timer.function = dummy_timer;
2332 dum_hcd->timer.data = (unsigned long)dum_hcd;
2333 dum_hcd->rh_state = DUMMY_RH_RUNNING;
2334 dum_hcd->stream_en_ep = 0;
2335 INIT_LIST_HEAD(&dum_hcd->urbp_list);
2336 dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET;
2337 dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
2338 dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
2339 #ifdef CONFIG_USB_OTG
2340 dummy_hcd_to_hcd(dum_hcd)->self.otg_port = 1;
2344 /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
2345 return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs);
2348 static int dummy_start(struct usb_hcd *hcd)
2350 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
2353 * MASTER side init ... we emulate a root hub that'll only ever
2354 * talk to one device (the slave side). Also appears in sysfs,
2355 * just like more familiar pci-based HCDs.
2357 if (!usb_hcd_is_primary_hcd(hcd))
2358 return dummy_start_ss(dum_hcd);
2360 spin_lock_init(&dum_hcd->dum->lock);
2361 init_timer(&dum_hcd->timer);
2362 dum_hcd->timer.function = dummy_timer;
2363 dum_hcd->timer.data = (unsigned long)dum_hcd;
2364 dum_hcd->rh_state = DUMMY_RH_RUNNING;
2366 INIT_LIST_HEAD(&dum_hcd->urbp_list);
2368 hcd->power_budget = POWER_BUDGET;
2369 hcd->state = HC_STATE_RUNNING;
2370 hcd->uses_new_polling = 1;
2372 #ifdef CONFIG_USB_OTG
2373 hcd->self.otg_port = 1;
2376 /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
2377 return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs);
2380 static void dummy_stop(struct usb_hcd *hcd)
2384 dum = hcd_to_dummy_hcd(hcd)->dum;
2385 device_remove_file(dummy_dev(hcd_to_dummy_hcd(hcd)), &dev_attr_urbs);
2386 usb_gadget_unregister_driver(dum->driver);
2387 dev_info(dummy_dev(hcd_to_dummy_hcd(hcd)), "stopped\n");
2390 /*-------------------------------------------------------------------------*/
2392 static int dummy_h_get_frame(struct usb_hcd *hcd)
2394 return dummy_g_get_frame(NULL);
2397 static int dummy_setup(struct usb_hcd *hcd)
2399 hcd->self.sg_tablesize = ~0;
2400 if (usb_hcd_is_primary_hcd(hcd)) {
2401 the_controller.hs_hcd = hcd_to_dummy_hcd(hcd);
2402 the_controller.hs_hcd->dum = &the_controller;
2404 * Mark the first roothub as being USB 2.0.
2405 * The USB 3.0 roothub will be registered later by
2408 hcd->speed = HCD_USB2;
2409 hcd->self.root_hub->speed = USB_SPEED_HIGH;
2411 the_controller.ss_hcd = hcd_to_dummy_hcd(hcd);
2412 the_controller.ss_hcd->dum = &the_controller;
2413 hcd->speed = HCD_USB3;
2414 hcd->self.root_hub->speed = USB_SPEED_SUPER;
2419 /* Change a group of bulk endpoints to support multiple stream IDs */
2420 static int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
2421 struct usb_host_endpoint **eps, unsigned int num_eps,
2422 unsigned int num_streams, gfp_t mem_flags)
2424 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
2425 unsigned long flags;
2427 int ret_streams = num_streams;
2434 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
2435 for (i = 0; i < num_eps; i++) {
2436 index = dummy_get_ep_idx(&eps[i]->desc);
2437 if ((1 << index) & dum_hcd->stream_en_ep) {
2438 ret_streams = -EINVAL;
2441 max_stream = usb_ss_max_streams(&eps[i]->ss_ep_comp);
2443 ret_streams = -EINVAL;
2446 if (max_stream < ret_streams) {
2447 dev_dbg(dummy_dev(dum_hcd), "Ep 0x%x only supports %u "
2449 eps[i]->desc.bEndpointAddress,
2451 ret_streams = max_stream;
2455 for (i = 0; i < num_eps; i++) {
2456 index = dummy_get_ep_idx(&eps[i]->desc);
2457 dum_hcd->stream_en_ep |= 1 << index;
2458 set_max_streams_for_pipe(dum_hcd,
2459 usb_endpoint_num(&eps[i]->desc), ret_streams);
2462 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
2466 /* Reverts a group of bulk endpoints back to not using stream IDs. */
2467 static int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
2468 struct usb_host_endpoint **eps, unsigned int num_eps,
2471 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
2472 unsigned long flags;
2477 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
2478 for (i = 0; i < num_eps; i++) {
2479 index = dummy_get_ep_idx(&eps[i]->desc);
2480 if (!((1 << index) & dum_hcd->stream_en_ep)) {
2486 for (i = 0; i < num_eps; i++) {
2487 index = dummy_get_ep_idx(&eps[i]->desc);
2488 dum_hcd->stream_en_ep &= ~(1 << index);
2489 set_max_streams_for_pipe(dum_hcd,
2490 usb_endpoint_num(&eps[i]->desc), 0);
2494 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
2498 static struct hc_driver dummy_hcd = {
2499 .description = (char *) driver_name,
2500 .product_desc = "Dummy host controller",
2501 .hcd_priv_size = sizeof(struct dummy_hcd),
2503 .flags = HCD_USB3 | HCD_SHARED,
2505 .reset = dummy_setup,
2506 .start = dummy_start,
2509 .urb_enqueue = dummy_urb_enqueue,
2510 .urb_dequeue = dummy_urb_dequeue,
2512 .get_frame_number = dummy_h_get_frame,
2514 .hub_status_data = dummy_hub_status,
2515 .hub_control = dummy_hub_control,
2516 .bus_suspend = dummy_bus_suspend,
2517 .bus_resume = dummy_bus_resume,
2519 .alloc_streams = dummy_alloc_streams,
2520 .free_streams = dummy_free_streams,
2523 static int dummy_hcd_probe(struct platform_device *pdev)
2525 struct usb_hcd *hs_hcd;
2526 struct usb_hcd *ss_hcd;
2529 dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);
2531 if (!mod_data.is_super_speed)
2532 dummy_hcd.flags = HCD_USB2;
2533 hs_hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev));
2538 retval = usb_add_hcd(hs_hcd, 0, 0);
2542 if (mod_data.is_super_speed) {
2543 ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev,
2544 dev_name(&pdev->dev), hs_hcd);
2547 goto dealloc_usb2_hcd;
2550 retval = usb_add_hcd(ss_hcd, 0, 0);
2557 usb_put_hcd(ss_hcd);
2559 usb_remove_hcd(hs_hcd);
2561 usb_put_hcd(hs_hcd);
2562 the_controller.hs_hcd = the_controller.ss_hcd = NULL;
2566 static int dummy_hcd_remove(struct platform_device *pdev)
2570 dum = hcd_to_dummy_hcd(platform_get_drvdata(pdev))->dum;
2573 usb_remove_hcd(dummy_hcd_to_hcd(dum->ss_hcd));
2574 usb_put_hcd(dummy_hcd_to_hcd(dum->ss_hcd));
2577 usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
2578 usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
2580 the_controller.hs_hcd = NULL;
2581 the_controller.ss_hcd = NULL;
2586 static int dummy_hcd_suspend(struct platform_device *pdev, pm_message_t state)
2588 struct usb_hcd *hcd;
2589 struct dummy_hcd *dum_hcd;
2592 dev_dbg(&pdev->dev, "%s\n", __func__);
2594 hcd = platform_get_drvdata(pdev);
2595 dum_hcd = hcd_to_dummy_hcd(hcd);
2596 if (dum_hcd->rh_state == DUMMY_RH_RUNNING) {
2597 dev_warn(&pdev->dev, "Root hub isn't suspended!\n");
2600 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2604 static int dummy_hcd_resume(struct platform_device *pdev)
2606 struct usb_hcd *hcd;
2608 dev_dbg(&pdev->dev, "%s\n", __func__);
2610 hcd = platform_get_drvdata(pdev);
2611 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2612 usb_hcd_poll_rh_status(hcd);
2616 static struct platform_driver dummy_hcd_driver = {
2617 .probe = dummy_hcd_probe,
2618 .remove = dummy_hcd_remove,
2619 .suspend = dummy_hcd_suspend,
2620 .resume = dummy_hcd_resume,
2622 .name = (char *) driver_name,
2623 .owner = THIS_MODULE,
2627 /*-------------------------------------------------------------------------*/
2629 static struct platform_device *the_udc_pdev;
2630 static struct platform_device *the_hcd_pdev;
2632 static int __init init(void)
2634 int retval = -ENOMEM;
2639 if (!mod_data.is_high_speed && mod_data.is_super_speed)
2642 the_hcd_pdev = platform_device_alloc(driver_name, -1);
2645 the_udc_pdev = platform_device_alloc(gadget_name, -1);
2649 retval = platform_driver_register(&dummy_hcd_driver);
2651 goto err_register_hcd_driver;
2652 retval = platform_driver_register(&dummy_udc_driver);
2654 goto err_register_udc_driver;
2656 retval = platform_device_add(the_hcd_pdev);
2659 if (!the_controller.hs_hcd ||
2660 (!the_controller.ss_hcd && mod_data.is_super_speed)) {
2662 * The hcd was added successfully but its probe function failed
2668 retval = platform_device_add(the_udc_pdev);
2671 if (!platform_get_drvdata(the_udc_pdev)) {
2673 * The udc was added successfully but its probe function failed
2682 platform_device_del(the_udc_pdev);
2684 platform_device_del(the_hcd_pdev);
2686 platform_driver_unregister(&dummy_udc_driver);
2687 err_register_udc_driver:
2688 platform_driver_unregister(&dummy_hcd_driver);
2689 err_register_hcd_driver:
2690 platform_device_put(the_udc_pdev);
2692 platform_device_put(the_hcd_pdev);
2697 static void __exit cleanup(void)
2699 platform_device_unregister(the_udc_pdev);
2700 platform_device_unregister(the_hcd_pdev);
2701 platform_driver_unregister(&dummy_udc_driver);
2702 platform_driver_unregister(&dummy_hcd_driver);
2704 module_exit(cleanup);