]> rtime.felk.cvut.cz Git - linux-imx.git/blob - drivers/dma/pl330.c
virtio-scsi: Fix virtqueue affinity setup
[linux-imx.git] / drivers / dma / pl330.c
1 /*
2  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
3  *              http://www.samsung.com
4  *
5  * Copyright (C) 2010 Samsung Electronics Co. Ltd.
6  *      Jaswinder Singh <jassi.brar@samsung.com>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  */
13
14 #include <linux/kernel.h>
15 #include <linux/io.h>
16 #include <linux/init.h>
17 #include <linux/slab.h>
18 #include <linux/module.h>
19 #include <linux/string.h>
20 #include <linux/delay.h>
21 #include <linux/interrupt.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/dmaengine.h>
24 #include <linux/amba/bus.h>
25 #include <linux/amba/pl330.h>
26 #include <linux/scatterlist.h>
27 #include <linux/of.h>
28 #include <linux/of_dma.h>
29 #include <linux/err.h>
30
31 #include "dmaengine.h"
32 #define PL330_MAX_CHAN          8
33 #define PL330_MAX_IRQS          32
34 #define PL330_MAX_PERI          32
35
36 enum pl330_srccachectrl {
37         SCCTRL0,        /* Noncacheable and nonbufferable */
38         SCCTRL1,        /* Bufferable only */
39         SCCTRL2,        /* Cacheable, but do not allocate */
40         SCCTRL3,        /* Cacheable and bufferable, but do not allocate */
41         SINVALID1,
42         SINVALID2,
43         SCCTRL6,        /* Cacheable write-through, allocate on reads only */
44         SCCTRL7,        /* Cacheable write-back, allocate on reads only */
45 };
46
47 enum pl330_dstcachectrl {
48         DCCTRL0,        /* Noncacheable and nonbufferable */
49         DCCTRL1,        /* Bufferable only */
50         DCCTRL2,        /* Cacheable, but do not allocate */
51         DCCTRL3,        /* Cacheable and bufferable, but do not allocate */
52         DINVALID1,      /* AWCACHE = 0x1000 */
53         DINVALID2,
54         DCCTRL6,        /* Cacheable write-through, allocate on writes only */
55         DCCTRL7,        /* Cacheable write-back, allocate on writes only */
56 };
57
58 enum pl330_byteswap {
59         SWAP_NO,
60         SWAP_2,
61         SWAP_4,
62         SWAP_8,
63         SWAP_16,
64 };
65
66 enum pl330_reqtype {
67         MEMTOMEM,
68         MEMTODEV,
69         DEVTOMEM,
70         DEVTODEV,
71 };
72
73 /* Register and Bit field Definitions */
74 #define DS                      0x0
75 #define DS_ST_STOP              0x0
76 #define DS_ST_EXEC              0x1
77 #define DS_ST_CMISS             0x2
78 #define DS_ST_UPDTPC            0x3
79 #define DS_ST_WFE               0x4
80 #define DS_ST_ATBRR             0x5
81 #define DS_ST_QBUSY             0x6
82 #define DS_ST_WFP               0x7
83 #define DS_ST_KILL              0x8
84 #define DS_ST_CMPLT             0x9
85 #define DS_ST_FLTCMP            0xe
86 #define DS_ST_FAULT             0xf
87
88 #define DPC                     0x4
89 #define INTEN                   0x20
90 #define ES                      0x24
91 #define INTSTATUS               0x28
92 #define INTCLR                  0x2c
93 #define FSM                     0x30
94 #define FSC                     0x34
95 #define FTM                     0x38
96
97 #define _FTC                    0x40
98 #define FTC(n)                  (_FTC + (n)*0x4)
99
100 #define _CS                     0x100
101 #define CS(n)                   (_CS + (n)*0x8)
102 #define CS_CNS                  (1 << 21)
103
104 #define _CPC                    0x104
105 #define CPC(n)                  (_CPC + (n)*0x8)
106
107 #define _SA                     0x400
108 #define SA(n)                   (_SA + (n)*0x20)
109
110 #define _DA                     0x404
111 #define DA(n)                   (_DA + (n)*0x20)
112
113 #define _CC                     0x408
114 #define CC(n)                   (_CC + (n)*0x20)
115
116 #define CC_SRCINC               (1 << 0)
117 #define CC_DSTINC               (1 << 14)
118 #define CC_SRCPRI               (1 << 8)
119 #define CC_DSTPRI               (1 << 22)
120 #define CC_SRCNS                (1 << 9)
121 #define CC_DSTNS                (1 << 23)
122 #define CC_SRCIA                (1 << 10)
123 #define CC_DSTIA                (1 << 24)
124 #define CC_SRCBRSTLEN_SHFT      4
125 #define CC_DSTBRSTLEN_SHFT      18
126 #define CC_SRCBRSTSIZE_SHFT     1
127 #define CC_DSTBRSTSIZE_SHFT     15
128 #define CC_SRCCCTRL_SHFT        11
129 #define CC_SRCCCTRL_MASK        0x7
130 #define CC_DSTCCTRL_SHFT        25
131 #define CC_DRCCCTRL_MASK        0x7
132 #define CC_SWAP_SHFT            28
133
134 #define _LC0                    0x40c
135 #define LC0(n)                  (_LC0 + (n)*0x20)
136
137 #define _LC1                    0x410
138 #define LC1(n)                  (_LC1 + (n)*0x20)
139
140 #define DBGSTATUS               0xd00
141 #define DBG_BUSY                (1 << 0)
142
143 #define DBGCMD                  0xd04
144 #define DBGINST0                0xd08
145 #define DBGINST1                0xd0c
146
147 #define CR0                     0xe00
148 #define CR1                     0xe04
149 #define CR2                     0xe08
150 #define CR3                     0xe0c
151 #define CR4                     0xe10
152 #define CRD                     0xe14
153
154 #define PERIPH_ID               0xfe0
155 #define PERIPH_REV_SHIFT        20
156 #define PERIPH_REV_MASK         0xf
157 #define PERIPH_REV_R0P0         0
158 #define PERIPH_REV_R1P0         1
159 #define PERIPH_REV_R1P1         2
160
161 #define CR0_PERIPH_REQ_SET      (1 << 0)
162 #define CR0_BOOT_EN_SET         (1 << 1)
163 #define CR0_BOOT_MAN_NS         (1 << 2)
164 #define CR0_NUM_CHANS_SHIFT     4
165 #define CR0_NUM_CHANS_MASK      0x7
166 #define CR0_NUM_PERIPH_SHIFT    12
167 #define CR0_NUM_PERIPH_MASK     0x1f
168 #define CR0_NUM_EVENTS_SHIFT    17
169 #define CR0_NUM_EVENTS_MASK     0x1f
170
171 #define CR1_ICACHE_LEN_SHIFT    0
172 #define CR1_ICACHE_LEN_MASK     0x7
173 #define CR1_NUM_ICACHELINES_SHIFT       4
174 #define CR1_NUM_ICACHELINES_MASK        0xf
175
176 #define CRD_DATA_WIDTH_SHIFT    0
177 #define CRD_DATA_WIDTH_MASK     0x7
178 #define CRD_WR_CAP_SHIFT        4
179 #define CRD_WR_CAP_MASK         0x7
180 #define CRD_WR_Q_DEP_SHIFT      8
181 #define CRD_WR_Q_DEP_MASK       0xf
182 #define CRD_RD_CAP_SHIFT        12
183 #define CRD_RD_CAP_MASK         0x7
184 #define CRD_RD_Q_DEP_SHIFT      16
185 #define CRD_RD_Q_DEP_MASK       0xf
186 #define CRD_DATA_BUFF_SHIFT     20
187 #define CRD_DATA_BUFF_MASK      0x3ff
188
189 #define PART                    0x330
190 #define DESIGNER                0x41
191 #define REVISION                0x0
192 #define INTEG_CFG               0x0
193 #define PERIPH_ID_VAL           ((PART << 0) | (DESIGNER << 12))
194
195 #define PL330_STATE_STOPPED             (1 << 0)
196 #define PL330_STATE_EXECUTING           (1 << 1)
197 #define PL330_STATE_WFE                 (1 << 2)
198 #define PL330_STATE_FAULTING            (1 << 3)
199 #define PL330_STATE_COMPLETING          (1 << 4)
200 #define PL330_STATE_WFP                 (1 << 5)
201 #define PL330_STATE_KILLING             (1 << 6)
202 #define PL330_STATE_FAULT_COMPLETING    (1 << 7)
203 #define PL330_STATE_CACHEMISS           (1 << 8)
204 #define PL330_STATE_UPDTPC              (1 << 9)
205 #define PL330_STATE_ATBARRIER           (1 << 10)
206 #define PL330_STATE_QUEUEBUSY           (1 << 11)
207 #define PL330_STATE_INVALID             (1 << 15)
208
209 #define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
210                                 | PL330_STATE_WFE | PL330_STATE_FAULTING)
211
212 #define CMD_DMAADDH             0x54
213 #define CMD_DMAEND              0x00
214 #define CMD_DMAFLUSHP           0x35
215 #define CMD_DMAGO               0xa0
216 #define CMD_DMALD               0x04
217 #define CMD_DMALDP              0x25
218 #define CMD_DMALP               0x20
219 #define CMD_DMALPEND            0x28
220 #define CMD_DMAKILL             0x01
221 #define CMD_DMAMOV              0xbc
222 #define CMD_DMANOP              0x18
223 #define CMD_DMARMB              0x12
224 #define CMD_DMASEV              0x34
225 #define CMD_DMAST               0x08
226 #define CMD_DMASTP              0x29
227 #define CMD_DMASTZ              0x0c
228 #define CMD_DMAWFE              0x36
229 #define CMD_DMAWFP              0x30
230 #define CMD_DMAWMB              0x13
231
232 #define SZ_DMAADDH              3
233 #define SZ_DMAEND               1
234 #define SZ_DMAFLUSHP            2
235 #define SZ_DMALD                1
236 #define SZ_DMALDP               2
237 #define SZ_DMALP                2
238 #define SZ_DMALPEND             2
239 #define SZ_DMAKILL              1
240 #define SZ_DMAMOV               6
241 #define SZ_DMANOP               1
242 #define SZ_DMARMB               1
243 #define SZ_DMASEV               2
244 #define SZ_DMAST                1
245 #define SZ_DMASTP               2
246 #define SZ_DMASTZ               1
247 #define SZ_DMAWFE               2
248 #define SZ_DMAWFP               2
249 #define SZ_DMAWMB               1
250 #define SZ_DMAGO                6
251
252 #define BRST_LEN(ccr)           ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
253 #define BRST_SIZE(ccr)          (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
254
255 #define BYTE_TO_BURST(b, ccr)   ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
256 #define BURST_TO_BYTE(c, ccr)   ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
257
258 /*
259  * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
260  * at 1byte/burst for P<->M and M<->M respectively.
261  * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
262  * should be enough for P<->M and M<->M respectively.
263  */
264 #define MCODE_BUFF_PER_REQ      256
265
266 /* If the _pl330_req is available to the client */
267 #define IS_FREE(req)    (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
268
269 /* Use this _only_ to wait on transient states */
270 #define UNTIL(t, s)     while (!(_state(t) & (s))) cpu_relax();
271
272 #ifdef PL330_DEBUG_MCGEN
273 static unsigned cmd_line;
274 #define PL330_DBGCMD_DUMP(off, x...)    do { \
275                                                 printk("%x:", cmd_line); \
276                                                 printk(x); \
277                                                 cmd_line += off; \
278                                         } while (0)
279 #define PL330_DBGMC_START(addr)         (cmd_line = addr)
280 #else
281 #define PL330_DBGCMD_DUMP(off, x...)    do {} while (0)
282 #define PL330_DBGMC_START(addr)         do {} while (0)
283 #endif
284
285 /* The number of default descriptors */
286
287 #define NR_DEFAULT_DESC 16
288
289 /* Populated by the PL330 core driver for DMA API driver's info */
290 struct pl330_config {
291         u32     periph_id;
292 #define DMAC_MODE_NS    (1 << 0)
293         unsigned int    mode;
294         unsigned int    data_bus_width:10; /* In number of bits */
295         unsigned int    data_buf_dep:10;
296         unsigned int    num_chan:4;
297         unsigned int    num_peri:6;
298         u32             peri_ns;
299         unsigned int    num_events:6;
300         u32             irq_ns;
301 };
302
303 /* Handle to the DMAC provided to the PL330 core */
304 struct pl330_info {
305         /* Owning device */
306         struct device *dev;
307         /* Size of MicroCode buffers for each channel. */
308         unsigned mcbufsz;
309         /* ioremap'ed address of PL330 registers. */
310         void __iomem    *base;
311         /* Client can freely use it. */
312         void    *client_data;
313         /* PL330 core data, Client must not touch it. */
314         void    *pl330_data;
315         /* Populated by the PL330 core driver during pl330_add */
316         struct pl330_config     pcfg;
317         /*
318          * If the DMAC has some reset mechanism, then the
319          * client may want to provide pointer to the method.
320          */
321         void (*dmac_reset)(struct pl330_info *pi);
322 };
323
324 /**
325  * Request Configuration.
326  * The PL330 core does not modify this and uses the last
327  * working configuration if the request doesn't provide any.
328  *
329  * The Client may want to provide this info only for the
330  * first request and a request with new settings.
331  */
332 struct pl330_reqcfg {
333         /* Address Incrementing */
334         unsigned dst_inc:1;
335         unsigned src_inc:1;
336
337         /*
338          * For now, the SRC & DST protection levels
339          * and burst size/length are assumed same.
340          */
341         bool nonsecure;
342         bool privileged;
343         bool insnaccess;
344         unsigned brst_len:5;
345         unsigned brst_size:3; /* in power of 2 */
346
347         enum pl330_dstcachectrl dcctl;
348         enum pl330_srccachectrl scctl;
349         enum pl330_byteswap swap;
350         struct pl330_config *pcfg;
351 };
352
353 /*
354  * One cycle of DMAC operation.
355  * There may be more than one xfer in a request.
356  */
357 struct pl330_xfer {
358         u32 src_addr;
359         u32 dst_addr;
360         /* Size to xfer */
361         u32 bytes;
362         /*
363          * Pointer to next xfer in the list.
364          * The last xfer in the req must point to NULL.
365          */
366         struct pl330_xfer *next;
367 };
368
369 /* The xfer callbacks are made with one of these arguments. */
370 enum pl330_op_err {
371         /* The all xfers in the request were success. */
372         PL330_ERR_NONE,
373         /* If req aborted due to global error. */
374         PL330_ERR_ABORT,
375         /* If req failed due to problem with Channel. */
376         PL330_ERR_FAIL,
377 };
378
379 /* A request defining Scatter-Gather List ending with NULL xfer. */
380 struct pl330_req {
381         enum pl330_reqtype rqtype;
382         /* Index of peripheral for the xfer. */
383         unsigned peri:5;
384         /* Unique token for this xfer, set by the client. */
385         void *token;
386         /* Callback to be called after xfer. */
387         void (*xfer_cb)(void *token, enum pl330_op_err err);
388         /* If NULL, req will be done at last set parameters. */
389         struct pl330_reqcfg *cfg;
390         /* Pointer to first xfer in the request. */
391         struct pl330_xfer *x;
392         /* Hook to attach to DMAC's list of reqs with due callback */
393         struct list_head rqd;
394 };
395
396 /*
397  * To know the status of the channel and DMAC, the client
398  * provides a pointer to this structure. The PL330 core
399  * fills it with current information.
400  */
401 struct pl330_chanstatus {
402         /*
403          * If the DMAC engine halted due to some error,
404          * the client should remove-add DMAC.
405          */
406         bool dmac_halted;
407         /*
408          * If channel is halted due to some error,
409          * the client should ABORT/FLUSH and START the channel.
410          */
411         bool faulting;
412         /* Location of last load */
413         u32 src_addr;
414         /* Location of last store */
415         u32 dst_addr;
416         /*
417          * Pointer to the currently active req, NULL if channel is
418          * inactive, even though the requests may be present.
419          */
420         struct pl330_req *top_req;
421         /* Pointer to req waiting second in the queue if any. */
422         struct pl330_req *wait_req;
423 };
424
425 enum pl330_chan_op {
426         /* Start the channel */
427         PL330_OP_START,
428         /* Abort the active xfer */
429         PL330_OP_ABORT,
430         /* Stop xfer and flush queue */
431         PL330_OP_FLUSH,
432 };
433
434 struct _xfer_spec {
435         u32 ccr;
436         struct pl330_req *r;
437         struct pl330_xfer *x;
438 };
439
440 enum dmamov_dst {
441         SAR = 0,
442         CCR,
443         DAR,
444 };
445
446 enum pl330_dst {
447         SRC = 0,
448         DST,
449 };
450
451 enum pl330_cond {
452         SINGLE,
453         BURST,
454         ALWAYS,
455 };
456
457 struct _pl330_req {
458         u32 mc_bus;
459         void *mc_cpu;
460         /* Number of bytes taken to setup MC for the req */
461         u32 mc_len;
462         struct pl330_req *r;
463 };
464
465 /* ToBeDone for tasklet */
466 struct _pl330_tbd {
467         bool reset_dmac;
468         bool reset_mngr;
469         u8 reset_chan;
470 };
471
472 /* A DMAC Thread */
473 struct pl330_thread {
474         u8 id;
475         int ev;
476         /* If the channel is not yet acquired by any client */
477         bool free;
478         /* Parent DMAC */
479         struct pl330_dmac *dmac;
480         /* Only two at a time */
481         struct _pl330_req req[2];
482         /* Index of the last enqueued request */
483         unsigned lstenq;
484         /* Index of the last submitted request or -1 if the DMA is stopped */
485         int req_running;
486 };
487
488 enum pl330_dmac_state {
489         UNINIT,
490         INIT,
491         DYING,
492 };
493
494 /* A DMAC */
495 struct pl330_dmac {
496         spinlock_t              lock;
497         /* Holds list of reqs with due callbacks */
498         struct list_head        req_done;
499         /* Pointer to platform specific stuff */
500         struct pl330_info       *pinfo;
501         /* Maximum possible events/irqs */
502         int                     events[32];
503         /* BUS address of MicroCode buffer */
504         dma_addr_t              mcode_bus;
505         /* CPU address of MicroCode buffer */
506         void                    *mcode_cpu;
507         /* List of all Channel threads */
508         struct pl330_thread     *channels;
509         /* Pointer to the MANAGER thread */
510         struct pl330_thread     *manager;
511         /* To handle bad news in interrupt */
512         struct tasklet_struct   tasks;
513         struct _pl330_tbd       dmac_tbd;
514         /* State of DMAC operation */
515         enum pl330_dmac_state   state;
516 };
517
518 enum desc_status {
519         /* In the DMAC pool */
520         FREE,
521         /*
522          * Allocated to some channel during prep_xxx
523          * Also may be sitting on the work_list.
524          */
525         PREP,
526         /*
527          * Sitting on the work_list and already submitted
528          * to the PL330 core. Not more than two descriptors
529          * of a channel can be BUSY at any time.
530          */
531         BUSY,
532         /*
533          * Sitting on the channel work_list but xfer done
534          * by PL330 core
535          */
536         DONE,
537 };
538
539 struct dma_pl330_chan {
540         /* Schedule desc completion */
541         struct tasklet_struct task;
542
543         /* DMA-Engine Channel */
544         struct dma_chan chan;
545
546         /* List of to be xfered descriptors */
547         struct list_head work_list;
548
549         /* Pointer to the DMAC that manages this channel,
550          * NULL if the channel is available to be acquired.
551          * As the parent, this DMAC also provides descriptors
552          * to the channel.
553          */
554         struct dma_pl330_dmac *dmac;
555
556         /* To protect channel manipulation */
557         spinlock_t lock;
558
559         /* Token of a hardware channel thread of PL330 DMAC
560          * NULL if the channel is available to be acquired.
561          */
562         void *pl330_chid;
563
564         /* For D-to-M and M-to-D channels */
565         int burst_sz; /* the peripheral fifo width */
566         int burst_len; /* the number of burst */
567         dma_addr_t fifo_addr;
568
569         /* for cyclic capability */
570         bool cyclic;
571 };
572
573 struct dma_pl330_dmac {
574         struct pl330_info pif;
575
576         /* DMA-Engine Device */
577         struct dma_device ddma;
578
579         /* Pool of descriptors available for the DMAC's channels */
580         struct list_head desc_pool;
581         /* To protect desc_pool manipulation */
582         spinlock_t pool_lock;
583
584         /* Peripheral channels connected to this DMAC */
585         struct dma_pl330_chan *peripherals; /* keep at end */
586 };
587
588 struct dma_pl330_desc {
589         /* To attach to a queue as child */
590         struct list_head node;
591
592         /* Descriptor for the DMA Engine API */
593         struct dma_async_tx_descriptor txd;
594
595         /* Xfer for PL330 core */
596         struct pl330_xfer px;
597
598         struct pl330_reqcfg rqcfg;
599         struct pl330_req req;
600
601         enum desc_status status;
602
603         /* The channel which currently holds this desc */
604         struct dma_pl330_chan *pchan;
605 };
606
607 struct dma_pl330_filter_args {
608         struct dma_pl330_dmac *pdmac;
609         unsigned int chan_id;
610 };
611
612 static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
613 {
614         if (r && r->xfer_cb)
615                 r->xfer_cb(r->token, err);
616 }
617
618 static inline bool _queue_empty(struct pl330_thread *thrd)
619 {
620         return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
621                 ? true : false;
622 }
623
624 static inline bool _queue_full(struct pl330_thread *thrd)
625 {
626         return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
627                 ? false : true;
628 }
629
630 static inline bool is_manager(struct pl330_thread *thrd)
631 {
632         struct pl330_dmac *pl330 = thrd->dmac;
633
634         /* MANAGER is indexed at the end */
635         if (thrd->id == pl330->pinfo->pcfg.num_chan)
636                 return true;
637         else
638                 return false;
639 }
640
641 /* If manager of the thread is in Non-Secure mode */
642 static inline bool _manager_ns(struct pl330_thread *thrd)
643 {
644         struct pl330_dmac *pl330 = thrd->dmac;
645
646         return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
647 }
648
649 static inline u32 get_revision(u32 periph_id)
650 {
651         return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
652 }
653
654 static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
655                 enum pl330_dst da, u16 val)
656 {
657         if (dry_run)
658                 return SZ_DMAADDH;
659
660         buf[0] = CMD_DMAADDH;
661         buf[0] |= (da << 1);
662         *((u16 *)&buf[1]) = val;
663
664         PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
665                 da == 1 ? "DA" : "SA", val);
666
667         return SZ_DMAADDH;
668 }
669
670 static inline u32 _emit_END(unsigned dry_run, u8 buf[])
671 {
672         if (dry_run)
673                 return SZ_DMAEND;
674
675         buf[0] = CMD_DMAEND;
676
677         PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
678
679         return SZ_DMAEND;
680 }
681
682 static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
683 {
684         if (dry_run)
685                 return SZ_DMAFLUSHP;
686
687         buf[0] = CMD_DMAFLUSHP;
688
689         peri &= 0x1f;
690         peri <<= 3;
691         buf[1] = peri;
692
693         PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
694
695         return SZ_DMAFLUSHP;
696 }
697
698 static inline u32 _emit_LD(unsigned dry_run, u8 buf[],  enum pl330_cond cond)
699 {
700         if (dry_run)
701                 return SZ_DMALD;
702
703         buf[0] = CMD_DMALD;
704
705         if (cond == SINGLE)
706                 buf[0] |= (0 << 1) | (1 << 0);
707         else if (cond == BURST)
708                 buf[0] |= (1 << 1) | (1 << 0);
709
710         PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
711                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
712
713         return SZ_DMALD;
714 }
715
716 static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
717                 enum pl330_cond cond, u8 peri)
718 {
719         if (dry_run)
720                 return SZ_DMALDP;
721
722         buf[0] = CMD_DMALDP;
723
724         if (cond == BURST)
725                 buf[0] |= (1 << 1);
726
727         peri &= 0x1f;
728         peri <<= 3;
729         buf[1] = peri;
730
731         PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
732                 cond == SINGLE ? 'S' : 'B', peri >> 3);
733
734         return SZ_DMALDP;
735 }
736
737 static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
738                 unsigned loop, u8 cnt)
739 {
740         if (dry_run)
741                 return SZ_DMALP;
742
743         buf[0] = CMD_DMALP;
744
745         if (loop)
746                 buf[0] |= (1 << 1);
747
748         cnt--; /* DMAC increments by 1 internally */
749         buf[1] = cnt;
750
751         PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
752
753         return SZ_DMALP;
754 }
755
756 struct _arg_LPEND {
757         enum pl330_cond cond;
758         bool forever;
759         unsigned loop;
760         u8 bjump;
761 };
762
763 static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
764                 const struct _arg_LPEND *arg)
765 {
766         enum pl330_cond cond = arg->cond;
767         bool forever = arg->forever;
768         unsigned loop = arg->loop;
769         u8 bjump = arg->bjump;
770
771         if (dry_run)
772                 return SZ_DMALPEND;
773
774         buf[0] = CMD_DMALPEND;
775
776         if (loop)
777                 buf[0] |= (1 << 2);
778
779         if (!forever)
780                 buf[0] |= (1 << 4);
781
782         if (cond == SINGLE)
783                 buf[0] |= (0 << 1) | (1 << 0);
784         else if (cond == BURST)
785                 buf[0] |= (1 << 1) | (1 << 0);
786
787         buf[1] = bjump;
788
789         PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
790                         forever ? "FE" : "END",
791                         cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
792                         loop ? '1' : '0',
793                         bjump);
794
795         return SZ_DMALPEND;
796 }
797
798 static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
799 {
800         if (dry_run)
801                 return SZ_DMAKILL;
802
803         buf[0] = CMD_DMAKILL;
804
805         return SZ_DMAKILL;
806 }
807
808 static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
809                 enum dmamov_dst dst, u32 val)
810 {
811         if (dry_run)
812                 return SZ_DMAMOV;
813
814         buf[0] = CMD_DMAMOV;
815         buf[1] = dst;
816         *((u32 *)&buf[2]) = val;
817
818         PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
819                 dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
820
821         return SZ_DMAMOV;
822 }
823
824 static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
825 {
826         if (dry_run)
827                 return SZ_DMANOP;
828
829         buf[0] = CMD_DMANOP;
830
831         PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
832
833         return SZ_DMANOP;
834 }
835
836 static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
837 {
838         if (dry_run)
839                 return SZ_DMARMB;
840
841         buf[0] = CMD_DMARMB;
842
843         PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
844
845         return SZ_DMARMB;
846 }
847
848 static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
849 {
850         if (dry_run)
851                 return SZ_DMASEV;
852
853         buf[0] = CMD_DMASEV;
854
855         ev &= 0x1f;
856         ev <<= 3;
857         buf[1] = ev;
858
859         PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
860
861         return SZ_DMASEV;
862 }
863
864 static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
865 {
866         if (dry_run)
867                 return SZ_DMAST;
868
869         buf[0] = CMD_DMAST;
870
871         if (cond == SINGLE)
872                 buf[0] |= (0 << 1) | (1 << 0);
873         else if (cond == BURST)
874                 buf[0] |= (1 << 1) | (1 << 0);
875
876         PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
877                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
878
879         return SZ_DMAST;
880 }
881
882 static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
883                 enum pl330_cond cond, u8 peri)
884 {
885         if (dry_run)
886                 return SZ_DMASTP;
887
888         buf[0] = CMD_DMASTP;
889
890         if (cond == BURST)
891                 buf[0] |= (1 << 1);
892
893         peri &= 0x1f;
894         peri <<= 3;
895         buf[1] = peri;
896
897         PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
898                 cond == SINGLE ? 'S' : 'B', peri >> 3);
899
900         return SZ_DMASTP;
901 }
902
903 static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
904 {
905         if (dry_run)
906                 return SZ_DMASTZ;
907
908         buf[0] = CMD_DMASTZ;
909
910         PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
911
912         return SZ_DMASTZ;
913 }
914
915 static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
916                 unsigned invalidate)
917 {
918         if (dry_run)
919                 return SZ_DMAWFE;
920
921         buf[0] = CMD_DMAWFE;
922
923         ev &= 0x1f;
924         ev <<= 3;
925         buf[1] = ev;
926
927         if (invalidate)
928                 buf[1] |= (1 << 1);
929
930         PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
931                 ev >> 3, invalidate ? ", I" : "");
932
933         return SZ_DMAWFE;
934 }
935
936 static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
937                 enum pl330_cond cond, u8 peri)
938 {
939         if (dry_run)
940                 return SZ_DMAWFP;
941
942         buf[0] = CMD_DMAWFP;
943
944         if (cond == SINGLE)
945                 buf[0] |= (0 << 1) | (0 << 0);
946         else if (cond == BURST)
947                 buf[0] |= (1 << 1) | (0 << 0);
948         else
949                 buf[0] |= (0 << 1) | (1 << 0);
950
951         peri &= 0x1f;
952         peri <<= 3;
953         buf[1] = peri;
954
955         PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
956                 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
957
958         return SZ_DMAWFP;
959 }
960
961 static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
962 {
963         if (dry_run)
964                 return SZ_DMAWMB;
965
966         buf[0] = CMD_DMAWMB;
967
968         PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
969
970         return SZ_DMAWMB;
971 }
972
973 struct _arg_GO {
974         u8 chan;
975         u32 addr;
976         unsigned ns;
977 };
978
979 static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
980                 const struct _arg_GO *arg)
981 {
982         u8 chan = arg->chan;
983         u32 addr = arg->addr;
984         unsigned ns = arg->ns;
985
986         if (dry_run)
987                 return SZ_DMAGO;
988
989         buf[0] = CMD_DMAGO;
990         buf[0] |= (ns << 1);
991
992         buf[1] = chan & 0x7;
993
994         *((u32 *)&buf[2]) = addr;
995
996         return SZ_DMAGO;
997 }
998
999 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
1000
1001 /* Returns Time-Out */
1002 static bool _until_dmac_idle(struct pl330_thread *thrd)
1003 {
1004         void __iomem *regs = thrd->dmac->pinfo->base;
1005         unsigned long loops = msecs_to_loops(5);
1006
1007         do {
1008                 /* Until Manager is Idle */
1009                 if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
1010                         break;
1011
1012                 cpu_relax();
1013         } while (--loops);
1014
1015         if (!loops)
1016                 return true;
1017
1018         return false;
1019 }
1020
1021 static inline void _execute_DBGINSN(struct pl330_thread *thrd,
1022                 u8 insn[], bool as_manager)
1023 {
1024         void __iomem *regs = thrd->dmac->pinfo->base;
1025         u32 val;
1026
1027         val = (insn[0] << 16) | (insn[1] << 24);
1028         if (!as_manager) {
1029                 val |= (1 << 0);
1030                 val |= (thrd->id << 8); /* Channel Number */
1031         }
1032         writel(val, regs + DBGINST0);
1033
1034         val = *((u32 *)&insn[2]);
1035         writel(val, regs + DBGINST1);
1036
1037         /* If timed out due to halted state-machine */
1038         if (_until_dmac_idle(thrd)) {
1039                 dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
1040                 return;
1041         }
1042
1043         /* Get going */
1044         writel(0, regs + DBGCMD);
1045 }
1046
1047 /*
1048  * Mark a _pl330_req as free.
1049  * We do it by writing DMAEND as the first instruction
1050  * because no valid request is going to have DMAEND as
1051  * its first instruction to execute.
1052  */
1053 static void mark_free(struct pl330_thread *thrd, int idx)
1054 {
1055         struct _pl330_req *req = &thrd->req[idx];
1056
1057         _emit_END(0, req->mc_cpu);
1058         req->mc_len = 0;
1059
1060         thrd->req_running = -1;
1061 }
1062
1063 static inline u32 _state(struct pl330_thread *thrd)
1064 {
1065         void __iomem *regs = thrd->dmac->pinfo->base;
1066         u32 val;
1067
1068         if (is_manager(thrd))
1069                 val = readl(regs + DS) & 0xf;
1070         else
1071                 val = readl(regs + CS(thrd->id)) & 0xf;
1072
1073         switch (val) {
1074         case DS_ST_STOP:
1075                 return PL330_STATE_STOPPED;
1076         case DS_ST_EXEC:
1077                 return PL330_STATE_EXECUTING;
1078         case DS_ST_CMISS:
1079                 return PL330_STATE_CACHEMISS;
1080         case DS_ST_UPDTPC:
1081                 return PL330_STATE_UPDTPC;
1082         case DS_ST_WFE:
1083                 return PL330_STATE_WFE;
1084         case DS_ST_FAULT:
1085                 return PL330_STATE_FAULTING;
1086         case DS_ST_ATBRR:
1087                 if (is_manager(thrd))
1088                         return PL330_STATE_INVALID;
1089                 else
1090                         return PL330_STATE_ATBARRIER;
1091         case DS_ST_QBUSY:
1092                 if (is_manager(thrd))
1093                         return PL330_STATE_INVALID;
1094                 else
1095                         return PL330_STATE_QUEUEBUSY;
1096         case DS_ST_WFP:
1097                 if (is_manager(thrd))
1098                         return PL330_STATE_INVALID;
1099                 else
1100                         return PL330_STATE_WFP;
1101         case DS_ST_KILL:
1102                 if (is_manager(thrd))
1103                         return PL330_STATE_INVALID;
1104                 else
1105                         return PL330_STATE_KILLING;
1106         case DS_ST_CMPLT:
1107                 if (is_manager(thrd))
1108                         return PL330_STATE_INVALID;
1109                 else
1110                         return PL330_STATE_COMPLETING;
1111         case DS_ST_FLTCMP:
1112                 if (is_manager(thrd))
1113                         return PL330_STATE_INVALID;
1114                 else
1115                         return PL330_STATE_FAULT_COMPLETING;
1116         default:
1117                 return PL330_STATE_INVALID;
1118         }
1119 }
1120
1121 static void _stop(struct pl330_thread *thrd)
1122 {
1123         void __iomem *regs = thrd->dmac->pinfo->base;
1124         u8 insn[6] = {0, 0, 0, 0, 0, 0};
1125
1126         if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
1127                 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1128
1129         /* Return if nothing needs to be done */
1130         if (_state(thrd) == PL330_STATE_COMPLETING
1131                   || _state(thrd) == PL330_STATE_KILLING
1132                   || _state(thrd) == PL330_STATE_STOPPED)
1133                 return;
1134
1135         _emit_KILL(0, insn);
1136
1137         /* Stop generating interrupts for SEV */
1138         writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
1139
1140         _execute_DBGINSN(thrd, insn, is_manager(thrd));
1141 }
1142
1143 /* Start doing req 'idx' of thread 'thrd' */
1144 static bool _trigger(struct pl330_thread *thrd)
1145 {
1146         void __iomem *regs = thrd->dmac->pinfo->base;
1147         struct _pl330_req *req;
1148         struct pl330_req *r;
1149         struct _arg_GO go;
1150         unsigned ns;
1151         u8 insn[6] = {0, 0, 0, 0, 0, 0};
1152         int idx;
1153
1154         /* Return if already ACTIVE */
1155         if (_state(thrd) != PL330_STATE_STOPPED)
1156                 return true;
1157
1158         idx = 1 - thrd->lstenq;
1159         if (!IS_FREE(&thrd->req[idx]))
1160                 req = &thrd->req[idx];
1161         else {
1162                 idx = thrd->lstenq;
1163                 if (!IS_FREE(&thrd->req[idx]))
1164                         req = &thrd->req[idx];
1165                 else
1166                         req = NULL;
1167         }
1168
1169         /* Return if no request */
1170         if (!req || !req->r)
1171                 return true;
1172
1173         r = req->r;
1174
1175         if (r->cfg)
1176                 ns = r->cfg->nonsecure ? 1 : 0;
1177         else if (readl(regs + CS(thrd->id)) & CS_CNS)
1178                 ns = 1;
1179         else
1180                 ns = 0;
1181
1182         /* See 'Abort Sources' point-4 at Page 2-25 */
1183         if (_manager_ns(thrd) && !ns)
1184                 dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
1185                         __func__, __LINE__);
1186
1187         go.chan = thrd->id;
1188         go.addr = req->mc_bus;
1189         go.ns = ns;
1190         _emit_GO(0, insn, &go);
1191
1192         /* Set to generate interrupts for SEV */
1193         writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
1194
1195         /* Only manager can execute GO */
1196         _execute_DBGINSN(thrd, insn, true);
1197
1198         thrd->req_running = idx;
1199
1200         return true;
1201 }
1202
1203 static bool _start(struct pl330_thread *thrd)
1204 {
1205         switch (_state(thrd)) {
1206         case PL330_STATE_FAULT_COMPLETING:
1207                 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1208
1209                 if (_state(thrd) == PL330_STATE_KILLING)
1210                         UNTIL(thrd, PL330_STATE_STOPPED)
1211
1212         case PL330_STATE_FAULTING:
1213                 _stop(thrd);
1214
1215         case PL330_STATE_KILLING:
1216         case PL330_STATE_COMPLETING:
1217                 UNTIL(thrd, PL330_STATE_STOPPED)
1218
1219         case PL330_STATE_STOPPED:
1220                 return _trigger(thrd);
1221
1222         case PL330_STATE_WFP:
1223         case PL330_STATE_QUEUEBUSY:
1224         case PL330_STATE_ATBARRIER:
1225         case PL330_STATE_UPDTPC:
1226         case PL330_STATE_CACHEMISS:
1227         case PL330_STATE_EXECUTING:
1228                 return true;
1229
1230         case PL330_STATE_WFE: /* For RESUME, nothing yet */
1231         default:
1232                 return false;
1233         }
1234 }
1235
1236 static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
1237                 const struct _xfer_spec *pxs, int cyc)
1238 {
1239         int off = 0;
1240         struct pl330_config *pcfg = pxs->r->cfg->pcfg;
1241
1242         /* check lock-up free version */
1243         if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
1244                 while (cyc--) {
1245                         off += _emit_LD(dry_run, &buf[off], ALWAYS);
1246                         off += _emit_ST(dry_run, &buf[off], ALWAYS);
1247                 }
1248         } else {
1249                 while (cyc--) {
1250                         off += _emit_LD(dry_run, &buf[off], ALWAYS);
1251                         off += _emit_RMB(dry_run, &buf[off]);
1252                         off += _emit_ST(dry_run, &buf[off], ALWAYS);
1253                         off += _emit_WMB(dry_run, &buf[off]);
1254                 }
1255         }
1256
1257         return off;
1258 }
1259
1260 static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
1261                 const struct _xfer_spec *pxs, int cyc)
1262 {
1263         int off = 0;
1264
1265         while (cyc--) {
1266                 off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1267                 off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1268                 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1269                 off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
1270         }
1271
1272         return off;
1273 }
1274
1275 static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
1276                 const struct _xfer_spec *pxs, int cyc)
1277 {
1278         int off = 0;
1279
1280         while (cyc--) {
1281                 off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1282                 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1283                 off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1284                 off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
1285         }
1286
1287         return off;
1288 }
1289
1290 static int _bursts(unsigned dry_run, u8 buf[],
1291                 const struct _xfer_spec *pxs, int cyc)
1292 {
1293         int off = 0;
1294
1295         switch (pxs->r->rqtype) {
1296         case MEMTODEV:
1297                 off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
1298                 break;
1299         case DEVTOMEM:
1300                 off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
1301                 break;
1302         case MEMTOMEM:
1303                 off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1304                 break;
1305         default:
1306                 off += 0x40000000; /* Scare off the Client */
1307                 break;
1308         }
1309
1310         return off;
1311 }
1312
1313 /* Returns bytes consumed and updates bursts */
1314 static inline int _loop(unsigned dry_run, u8 buf[],
1315                 unsigned long *bursts, const struct _xfer_spec *pxs)
1316 {
1317         int cyc, cycmax, szlp, szlpend, szbrst, off;
1318         unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1319         struct _arg_LPEND lpend;
1320
1321         /* Max iterations possible in DMALP is 256 */
1322         if (*bursts >= 256*256) {
1323                 lcnt1 = 256;
1324                 lcnt0 = 256;
1325                 cyc = *bursts / lcnt1 / lcnt0;
1326         } else if (*bursts > 256) {
1327                 lcnt1 = 256;
1328                 lcnt0 = *bursts / lcnt1;
1329                 cyc = 1;
1330         } else {
1331                 lcnt1 = *bursts;
1332                 lcnt0 = 0;
1333                 cyc = 1;
1334         }
1335
1336         szlp = _emit_LP(1, buf, 0, 0);
1337         szbrst = _bursts(1, buf, pxs, 1);
1338
1339         lpend.cond = ALWAYS;
1340         lpend.forever = false;
1341         lpend.loop = 0;
1342         lpend.bjump = 0;
1343         szlpend = _emit_LPEND(1, buf, &lpend);
1344
1345         if (lcnt0) {
1346                 szlp *= 2;
1347                 szlpend *= 2;
1348         }
1349
1350         /*
1351          * Max bursts that we can unroll due to limit on the
1352          * size of backward jump that can be encoded in DMALPEND
1353          * which is 8-bits and hence 255
1354          */
1355         cycmax = (255 - (szlp + szlpend)) / szbrst;
1356
1357         cyc = (cycmax < cyc) ? cycmax : cyc;
1358
1359         off = 0;
1360
1361         if (lcnt0) {
1362                 off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1363                 ljmp0 = off;
1364         }
1365
1366         off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1367         ljmp1 = off;
1368
1369         off += _bursts(dry_run, &buf[off], pxs, cyc);
1370
1371         lpend.cond = ALWAYS;
1372         lpend.forever = false;
1373         lpend.loop = 1;
1374         lpend.bjump = off - ljmp1;
1375         off += _emit_LPEND(dry_run, &buf[off], &lpend);
1376
1377         if (lcnt0) {
1378                 lpend.cond = ALWAYS;
1379                 lpend.forever = false;
1380                 lpend.loop = 0;
1381                 lpend.bjump = off - ljmp0;
1382                 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1383         }
1384
1385         *bursts = lcnt1 * cyc;
1386         if (lcnt0)
1387                 *bursts *= lcnt0;
1388
1389         return off;
1390 }
1391
1392 static inline int _setup_loops(unsigned dry_run, u8 buf[],
1393                 const struct _xfer_spec *pxs)
1394 {
1395         struct pl330_xfer *x = pxs->x;
1396         u32 ccr = pxs->ccr;
1397         unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1398         int off = 0;
1399
1400         while (bursts) {
1401                 c = bursts;
1402                 off += _loop(dry_run, &buf[off], &c, pxs);
1403                 bursts -= c;
1404         }
1405
1406         return off;
1407 }
1408
1409 static inline int _setup_xfer(unsigned dry_run, u8 buf[],
1410                 const struct _xfer_spec *pxs)
1411 {
1412         struct pl330_xfer *x = pxs->x;
1413         int off = 0;
1414
1415         /* DMAMOV SAR, x->src_addr */
1416         off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1417         /* DMAMOV DAR, x->dst_addr */
1418         off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1419
1420         /* Setup Loop(s) */
1421         off += _setup_loops(dry_run, &buf[off], pxs);
1422
1423         return off;
1424 }
1425
1426 /*
1427  * A req is a sequence of one or more xfer units.
1428  * Returns the number of bytes taken to setup the MC for the req.
1429  */
1430 static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
1431                 unsigned index, struct _xfer_spec *pxs)
1432 {
1433         struct _pl330_req *req = &thrd->req[index];
1434         struct pl330_xfer *x;
1435         u8 *buf = req->mc_cpu;
1436         int off = 0;
1437
1438         PL330_DBGMC_START(req->mc_bus);
1439
1440         /* DMAMOV CCR, ccr */
1441         off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1442
1443         x = pxs->r->x;
1444         do {
1445                 /* Error if xfer length is not aligned at burst size */
1446                 if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
1447                         return -EINVAL;
1448
1449                 pxs->x = x;
1450                 off += _setup_xfer(dry_run, &buf[off], pxs);
1451
1452                 x = x->next;
1453         } while (x);
1454
1455         /* DMASEV peripheral/event */
1456         off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1457         /* DMAEND */
1458         off += _emit_END(dry_run, &buf[off]);
1459
1460         return off;
1461 }
1462
1463 static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1464 {
1465         u32 ccr = 0;
1466
1467         if (rqc->src_inc)
1468                 ccr |= CC_SRCINC;
1469
1470         if (rqc->dst_inc)
1471                 ccr |= CC_DSTINC;
1472
1473         /* We set same protection levels for Src and DST for now */
1474         if (rqc->privileged)
1475                 ccr |= CC_SRCPRI | CC_DSTPRI;
1476         if (rqc->nonsecure)
1477                 ccr |= CC_SRCNS | CC_DSTNS;
1478         if (rqc->insnaccess)
1479                 ccr |= CC_SRCIA | CC_DSTIA;
1480
1481         ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1482         ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1483
1484         ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1485         ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1486
1487         ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
1488         ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
1489
1490         ccr |= (rqc->swap << CC_SWAP_SHFT);
1491
1492         return ccr;
1493 }
1494
1495 static inline bool _is_valid(u32 ccr)
1496 {
1497         enum pl330_dstcachectrl dcctl;
1498         enum pl330_srccachectrl scctl;
1499
1500         dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
1501         scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
1502
1503         if (dcctl == DINVALID1 || dcctl == DINVALID2
1504                         || scctl == SINVALID1 || scctl == SINVALID2)
1505                 return false;
1506         else
1507                 return true;
1508 }
1509
1510 /*
1511  * Submit a list of xfers after which the client wants notification.
1512  * Client is not notified after each xfer unit, just once after all
1513  * xfer units are done or some error occurs.
1514  */
1515 static int pl330_submit_req(void *ch_id, struct pl330_req *r)
1516 {
1517         struct pl330_thread *thrd = ch_id;
1518         struct pl330_dmac *pl330;
1519         struct pl330_info *pi;
1520         struct _xfer_spec xs;
1521         unsigned long flags;
1522         void __iomem *regs;
1523         unsigned idx;
1524         u32 ccr;
1525         int ret = 0;
1526
1527         /* No Req or Unacquired Channel or DMAC */
1528         if (!r || !thrd || thrd->free)
1529                 return -EINVAL;
1530
1531         pl330 = thrd->dmac;
1532         pi = pl330->pinfo;
1533         regs = pi->base;
1534
1535         if (pl330->state == DYING
1536                 || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1537                 dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
1538                         __func__, __LINE__);
1539                 return -EAGAIN;
1540         }
1541
1542         /* If request for non-existing peripheral */
1543         if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
1544                 dev_info(thrd->dmac->pinfo->dev,
1545                                 "%s:%d Invalid peripheral(%u)!\n",
1546                                 __func__, __LINE__, r->peri);
1547                 return -EINVAL;
1548         }
1549
1550         spin_lock_irqsave(&pl330->lock, flags);
1551
1552         if (_queue_full(thrd)) {
1553                 ret = -EAGAIN;
1554                 goto xfer_exit;
1555         }
1556
1557
1558         /* Use last settings, if not provided */
1559         if (r->cfg) {
1560                 /* Prefer Secure Channel */
1561                 if (!_manager_ns(thrd))
1562                         r->cfg->nonsecure = 0;
1563                 else
1564                         r->cfg->nonsecure = 1;
1565
1566                 ccr = _prepare_ccr(r->cfg);
1567         } else {
1568                 ccr = readl(regs + CC(thrd->id));
1569         }
1570
1571         /* If this req doesn't have valid xfer settings */
1572         if (!_is_valid(ccr)) {
1573                 ret = -EINVAL;
1574                 dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
1575                         __func__, __LINE__, ccr);
1576                 goto xfer_exit;
1577         }
1578
1579         idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
1580
1581         xs.ccr = ccr;
1582         xs.r = r;
1583
1584         /* First dry run to check if req is acceptable */
1585         ret = _setup_req(1, thrd, idx, &xs);
1586         if (ret < 0)
1587                 goto xfer_exit;
1588
1589         if (ret > pi->mcbufsz / 2) {
1590                 dev_info(thrd->dmac->pinfo->dev,
1591                         "%s:%d Trying increasing mcbufsz\n",
1592                                 __func__, __LINE__);
1593                 ret = -ENOMEM;
1594                 goto xfer_exit;
1595         }
1596
1597         /* Hook the request */
1598         thrd->lstenq = idx;
1599         thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
1600         thrd->req[idx].r = r;
1601
1602         ret = 0;
1603
1604 xfer_exit:
1605         spin_unlock_irqrestore(&pl330->lock, flags);
1606
1607         return ret;
1608 }
1609
1610 static void pl330_dotask(unsigned long data)
1611 {
1612         struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
1613         struct pl330_info *pi = pl330->pinfo;
1614         unsigned long flags;
1615         int i;
1616
1617         spin_lock_irqsave(&pl330->lock, flags);
1618
1619         /* The DMAC itself gone nuts */
1620         if (pl330->dmac_tbd.reset_dmac) {
1621                 pl330->state = DYING;
1622                 /* Reset the manager too */
1623                 pl330->dmac_tbd.reset_mngr = true;
1624                 /* Clear the reset flag */
1625                 pl330->dmac_tbd.reset_dmac = false;
1626         }
1627
1628         if (pl330->dmac_tbd.reset_mngr) {
1629                 _stop(pl330->manager);
1630                 /* Reset all channels */
1631                 pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
1632                 /* Clear the reset flag */
1633                 pl330->dmac_tbd.reset_mngr = false;
1634         }
1635
1636         for (i = 0; i < pi->pcfg.num_chan; i++) {
1637
1638                 if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1639                         struct pl330_thread *thrd = &pl330->channels[i];
1640                         void __iomem *regs = pi->base;
1641                         enum pl330_op_err err;
1642
1643                         _stop(thrd);
1644
1645                         if (readl(regs + FSC) & (1 << thrd->id))
1646                                 err = PL330_ERR_FAIL;
1647                         else
1648                                 err = PL330_ERR_ABORT;
1649
1650                         spin_unlock_irqrestore(&pl330->lock, flags);
1651
1652                         _callback(thrd->req[1 - thrd->lstenq].r, err);
1653                         _callback(thrd->req[thrd->lstenq].r, err);
1654
1655                         spin_lock_irqsave(&pl330->lock, flags);
1656
1657                         thrd->req[0].r = NULL;
1658                         thrd->req[1].r = NULL;
1659                         mark_free(thrd, 0);
1660                         mark_free(thrd, 1);
1661
1662                         /* Clear the reset flag */
1663                         pl330->dmac_tbd.reset_chan &= ~(1 << i);
1664                 }
1665         }
1666
1667         spin_unlock_irqrestore(&pl330->lock, flags);
1668
1669         return;
1670 }
1671
1672 /* Returns 1 if state was updated, 0 otherwise */
1673 static int pl330_update(const struct pl330_info *pi)
1674 {
1675         struct pl330_req *rqdone, *tmp;
1676         struct pl330_dmac *pl330;
1677         unsigned long flags;
1678         void __iomem *regs;
1679         u32 val;
1680         int id, ev, ret = 0;
1681
1682         if (!pi || !pi->pl330_data)
1683                 return 0;
1684
1685         regs = pi->base;
1686         pl330 = pi->pl330_data;
1687
1688         spin_lock_irqsave(&pl330->lock, flags);
1689
1690         val = readl(regs + FSM) & 0x1;
1691         if (val)
1692                 pl330->dmac_tbd.reset_mngr = true;
1693         else
1694                 pl330->dmac_tbd.reset_mngr = false;
1695
1696         val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
1697         pl330->dmac_tbd.reset_chan |= val;
1698         if (val) {
1699                 int i = 0;
1700                 while (i < pi->pcfg.num_chan) {
1701                         if (val & (1 << i)) {
1702                                 dev_info(pi->dev,
1703                                         "Reset Channel-%d\t CS-%x FTC-%x\n",
1704                                                 i, readl(regs + CS(i)),
1705                                                 readl(regs + FTC(i)));
1706                                 _stop(&pl330->channels[i]);
1707                         }
1708                         i++;
1709                 }
1710         }
1711
1712         /* Check which event happened i.e, thread notified */
1713         val = readl(regs + ES);
1714         if (pi->pcfg.num_events < 32
1715                         && val & ~((1 << pi->pcfg.num_events) - 1)) {
1716                 pl330->dmac_tbd.reset_dmac = true;
1717                 dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
1718                 ret = 1;
1719                 goto updt_exit;
1720         }
1721
1722         for (ev = 0; ev < pi->pcfg.num_events; ev++) {
1723                 if (val & (1 << ev)) { /* Event occurred */
1724                         struct pl330_thread *thrd;
1725                         u32 inten = readl(regs + INTEN);
1726                         int active;
1727
1728                         /* Clear the event */
1729                         if (inten & (1 << ev))
1730                                 writel(1 << ev, regs + INTCLR);
1731
1732                         ret = 1;
1733
1734                         id = pl330->events[ev];
1735
1736                         thrd = &pl330->channels[id];
1737
1738                         active = thrd->req_running;
1739                         if (active == -1) /* Aborted */
1740                                 continue;
1741
1742                         /* Detach the req */
1743                         rqdone = thrd->req[active].r;
1744                         thrd->req[active].r = NULL;
1745
1746                         mark_free(thrd, active);
1747
1748                         /* Get going again ASAP */
1749                         _start(thrd);
1750
1751                         /* For now, just make a list of callbacks to be done */
1752                         list_add_tail(&rqdone->rqd, &pl330->req_done);
1753                 }
1754         }
1755
1756         /* Now that we are in no hurry, do the callbacks */
1757         list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) {
1758                 list_del(&rqdone->rqd);
1759
1760                 spin_unlock_irqrestore(&pl330->lock, flags);
1761                 _callback(rqdone, PL330_ERR_NONE);
1762                 spin_lock_irqsave(&pl330->lock, flags);
1763         }
1764
1765 updt_exit:
1766         spin_unlock_irqrestore(&pl330->lock, flags);
1767
1768         if (pl330->dmac_tbd.reset_dmac
1769                         || pl330->dmac_tbd.reset_mngr
1770                         || pl330->dmac_tbd.reset_chan) {
1771                 ret = 1;
1772                 tasklet_schedule(&pl330->tasks);
1773         }
1774
1775         return ret;
1776 }
1777
1778 static int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
1779 {
1780         struct pl330_thread *thrd = ch_id;
1781         struct pl330_dmac *pl330;
1782         unsigned long flags;
1783         int ret = 0, active;
1784
1785         if (!thrd || thrd->free || thrd->dmac->state == DYING)
1786                 return -EINVAL;
1787
1788         pl330 = thrd->dmac;
1789         active = thrd->req_running;
1790
1791         spin_lock_irqsave(&pl330->lock, flags);
1792
1793         switch (op) {
1794         case PL330_OP_FLUSH:
1795                 /* Make sure the channel is stopped */
1796                 _stop(thrd);
1797
1798                 thrd->req[0].r = NULL;
1799                 thrd->req[1].r = NULL;
1800                 mark_free(thrd, 0);
1801                 mark_free(thrd, 1);
1802                 break;
1803
1804         case PL330_OP_ABORT:
1805                 /* Make sure the channel is stopped */
1806                 _stop(thrd);
1807
1808                 /* ABORT is only for the active req */
1809                 if (active == -1)
1810                         break;
1811
1812                 thrd->req[active].r = NULL;
1813                 mark_free(thrd, active);
1814
1815                 /* Start the next */
1816         case PL330_OP_START:
1817                 if ((active == -1) && !_start(thrd))
1818                         ret = -EIO;
1819                 break;
1820
1821         default:
1822                 ret = -EINVAL;
1823         }
1824
1825         spin_unlock_irqrestore(&pl330->lock, flags);
1826         return ret;
1827 }
1828
1829 /* Reserve an event */
1830 static inline int _alloc_event(struct pl330_thread *thrd)
1831 {
1832         struct pl330_dmac *pl330 = thrd->dmac;
1833         struct pl330_info *pi = pl330->pinfo;
1834         int ev;
1835
1836         for (ev = 0; ev < pi->pcfg.num_events; ev++)
1837                 if (pl330->events[ev] == -1) {
1838                         pl330->events[ev] = thrd->id;
1839                         return ev;
1840                 }
1841
1842         return -1;
1843 }
1844
1845 static bool _chan_ns(const struct pl330_info *pi, int i)
1846 {
1847         return pi->pcfg.irq_ns & (1 << i);
1848 }
1849
1850 /* Upon success, returns IdentityToken for the
1851  * allocated channel, NULL otherwise.
1852  */
1853 static void *pl330_request_channel(const struct pl330_info *pi)
1854 {
1855         struct pl330_thread *thrd = NULL;
1856         struct pl330_dmac *pl330;
1857         unsigned long flags;
1858         int chans, i;
1859
1860         if (!pi || !pi->pl330_data)
1861                 return NULL;
1862
1863         pl330 = pi->pl330_data;
1864
1865         if (pl330->state == DYING)
1866                 return NULL;
1867
1868         chans = pi->pcfg.num_chan;
1869
1870         spin_lock_irqsave(&pl330->lock, flags);
1871
1872         for (i = 0; i < chans; i++) {
1873                 thrd = &pl330->channels[i];
1874                 if ((thrd->free) && (!_manager_ns(thrd) ||
1875                                         _chan_ns(pi, i))) {
1876                         thrd->ev = _alloc_event(thrd);
1877                         if (thrd->ev >= 0) {
1878                                 thrd->free = false;
1879                                 thrd->lstenq = 1;
1880                                 thrd->req[0].r = NULL;
1881                                 mark_free(thrd, 0);
1882                                 thrd->req[1].r = NULL;
1883                                 mark_free(thrd, 1);
1884                                 break;
1885                         }
1886                 }
1887                 thrd = NULL;
1888         }
1889
1890         spin_unlock_irqrestore(&pl330->lock, flags);
1891
1892         return thrd;
1893 }
1894
1895 /* Release an event */
1896 static inline void _free_event(struct pl330_thread *thrd, int ev)
1897 {
1898         struct pl330_dmac *pl330 = thrd->dmac;
1899         struct pl330_info *pi = pl330->pinfo;
1900
1901         /* If the event is valid and was held by the thread */
1902         if (ev >= 0 && ev < pi->pcfg.num_events
1903                         && pl330->events[ev] == thrd->id)
1904                 pl330->events[ev] = -1;
1905 }
1906
1907 static void pl330_release_channel(void *ch_id)
1908 {
1909         struct pl330_thread *thrd = ch_id;
1910         struct pl330_dmac *pl330;
1911         unsigned long flags;
1912
1913         if (!thrd || thrd->free)
1914                 return;
1915
1916         _stop(thrd);
1917
1918         _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
1919         _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
1920
1921         pl330 = thrd->dmac;
1922
1923         spin_lock_irqsave(&pl330->lock, flags);
1924         _free_event(thrd, thrd->ev);
1925         thrd->free = true;
1926         spin_unlock_irqrestore(&pl330->lock, flags);
1927 }
1928
1929 /* Initialize the structure for PL330 configuration, that can be used
1930  * by the client driver the make best use of the DMAC
1931  */
1932 static void read_dmac_config(struct pl330_info *pi)
1933 {
1934         void __iomem *regs = pi->base;
1935         u32 val;
1936
1937         val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1938         val &= CRD_DATA_WIDTH_MASK;
1939         pi->pcfg.data_bus_width = 8 * (1 << val);
1940
1941         val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1942         val &= CRD_DATA_BUFF_MASK;
1943         pi->pcfg.data_buf_dep = val + 1;
1944
1945         val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1946         val &= CR0_NUM_CHANS_MASK;
1947         val += 1;
1948         pi->pcfg.num_chan = val;
1949
1950         val = readl(regs + CR0);
1951         if (val & CR0_PERIPH_REQ_SET) {
1952                 val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1953                 val += 1;
1954                 pi->pcfg.num_peri = val;
1955                 pi->pcfg.peri_ns = readl(regs + CR4);
1956         } else {
1957                 pi->pcfg.num_peri = 0;
1958         }
1959
1960         val = readl(regs + CR0);
1961         if (val & CR0_BOOT_MAN_NS)
1962                 pi->pcfg.mode |= DMAC_MODE_NS;
1963         else
1964                 pi->pcfg.mode &= ~DMAC_MODE_NS;
1965
1966         val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1967         val &= CR0_NUM_EVENTS_MASK;
1968         val += 1;
1969         pi->pcfg.num_events = val;
1970
1971         pi->pcfg.irq_ns = readl(regs + CR3);
1972 }
1973
1974 static inline void _reset_thread(struct pl330_thread *thrd)
1975 {
1976         struct pl330_dmac *pl330 = thrd->dmac;
1977         struct pl330_info *pi = pl330->pinfo;
1978
1979         thrd->req[0].mc_cpu = pl330->mcode_cpu
1980                                 + (thrd->id * pi->mcbufsz);
1981         thrd->req[0].mc_bus = pl330->mcode_bus
1982                                 + (thrd->id * pi->mcbufsz);
1983         thrd->req[0].r = NULL;
1984         mark_free(thrd, 0);
1985
1986         thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
1987                                 + pi->mcbufsz / 2;
1988         thrd->req[1].mc_bus = thrd->req[0].mc_bus
1989                                 + pi->mcbufsz / 2;
1990         thrd->req[1].r = NULL;
1991         mark_free(thrd, 1);
1992 }
1993
1994 static int dmac_alloc_threads(struct pl330_dmac *pl330)
1995 {
1996         struct pl330_info *pi = pl330->pinfo;
1997         int chans = pi->pcfg.num_chan;
1998         struct pl330_thread *thrd;
1999         int i;
2000
2001         /* Allocate 1 Manager and 'chans' Channel threads */
2002         pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
2003                                         GFP_KERNEL);
2004         if (!pl330->channels)
2005                 return -ENOMEM;
2006
2007         /* Init Channel threads */
2008         for (i = 0; i < chans; i++) {
2009                 thrd = &pl330->channels[i];
2010                 thrd->id = i;
2011                 thrd->dmac = pl330;
2012                 _reset_thread(thrd);
2013                 thrd->free = true;
2014         }
2015
2016         /* MANAGER is indexed at the end */
2017         thrd = &pl330->channels[chans];
2018         thrd->id = chans;
2019         thrd->dmac = pl330;
2020         thrd->free = false;
2021         pl330->manager = thrd;
2022
2023         return 0;
2024 }
2025
2026 static int dmac_alloc_resources(struct pl330_dmac *pl330)
2027 {
2028         struct pl330_info *pi = pl330->pinfo;
2029         int chans = pi->pcfg.num_chan;
2030         int ret;
2031
2032         /*
2033          * Alloc MicroCode buffer for 'chans' Channel threads.
2034          * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
2035          */
2036         pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
2037                                 chans * pi->mcbufsz,
2038                                 &pl330->mcode_bus, GFP_KERNEL);
2039         if (!pl330->mcode_cpu) {
2040                 dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
2041                         __func__, __LINE__);
2042                 return -ENOMEM;
2043         }
2044
2045         ret = dmac_alloc_threads(pl330);
2046         if (ret) {
2047                 dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
2048                         __func__, __LINE__);
2049                 dma_free_coherent(pi->dev,
2050                                 chans * pi->mcbufsz,
2051                                 pl330->mcode_cpu, pl330->mcode_bus);
2052                 return ret;
2053         }
2054
2055         return 0;
2056 }
2057
2058 static int pl330_add(struct pl330_info *pi)
2059 {
2060         struct pl330_dmac *pl330;
2061         void __iomem *regs;
2062         int i, ret;
2063
2064         if (!pi || !pi->dev)
2065                 return -EINVAL;
2066
2067         /* If already added */
2068         if (pi->pl330_data)
2069                 return -EINVAL;
2070
2071         /*
2072          * If the SoC can perform reset on the DMAC, then do it
2073          * before reading its configuration.
2074          */
2075         if (pi->dmac_reset)
2076                 pi->dmac_reset(pi);
2077
2078         regs = pi->base;
2079
2080         /* Check if we can handle this DMAC */
2081         if ((pi->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
2082                 dev_err(pi->dev, "PERIPH_ID 0x%x !\n", pi->pcfg.periph_id);
2083                 return -EINVAL;
2084         }
2085
2086         /* Read the configuration of the DMAC */
2087         read_dmac_config(pi);
2088
2089         if (pi->pcfg.num_events == 0) {
2090                 dev_err(pi->dev, "%s:%d Can't work without events!\n",
2091                         __func__, __LINE__);
2092                 return -EINVAL;
2093         }
2094
2095         pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
2096         if (!pl330) {
2097                 dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
2098                         __func__, __LINE__);
2099                 return -ENOMEM;
2100         }
2101
2102         /* Assign the info structure and private data */
2103         pl330->pinfo = pi;
2104         pi->pl330_data = pl330;
2105
2106         spin_lock_init(&pl330->lock);
2107
2108         INIT_LIST_HEAD(&pl330->req_done);
2109
2110         /* Use default MC buffer size if not provided */
2111         if (!pi->mcbufsz)
2112                 pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
2113
2114         /* Mark all events as free */
2115         for (i = 0; i < pi->pcfg.num_events; i++)
2116                 pl330->events[i] = -1;
2117
2118         /* Allocate resources needed by the DMAC */
2119         ret = dmac_alloc_resources(pl330);
2120         if (ret) {
2121                 dev_err(pi->dev, "Unable to create channels for DMAC\n");
2122                 kfree(pl330);
2123                 return ret;
2124         }
2125
2126         tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
2127
2128         pl330->state = INIT;
2129
2130         return 0;
2131 }
2132
2133 static int dmac_free_threads(struct pl330_dmac *pl330)
2134 {
2135         struct pl330_info *pi = pl330->pinfo;
2136         int chans = pi->pcfg.num_chan;
2137         struct pl330_thread *thrd;
2138         int i;
2139
2140         /* Release Channel threads */
2141         for (i = 0; i < chans; i++) {
2142                 thrd = &pl330->channels[i];
2143                 pl330_release_channel((void *)thrd);
2144         }
2145
2146         /* Free memory */
2147         kfree(pl330->channels);
2148
2149         return 0;
2150 }
2151
2152 static void dmac_free_resources(struct pl330_dmac *pl330)
2153 {
2154         struct pl330_info *pi = pl330->pinfo;
2155         int chans = pi->pcfg.num_chan;
2156
2157         dmac_free_threads(pl330);
2158
2159         dma_free_coherent(pi->dev, chans * pi->mcbufsz,
2160                                 pl330->mcode_cpu, pl330->mcode_bus);
2161 }
2162
2163 static void pl330_del(struct pl330_info *pi)
2164 {
2165         struct pl330_dmac *pl330;
2166
2167         if (!pi || !pi->pl330_data)
2168                 return;
2169
2170         pl330 = pi->pl330_data;
2171
2172         pl330->state = UNINIT;
2173
2174         tasklet_kill(&pl330->tasks);
2175
2176         /* Free DMAC resources */
2177         dmac_free_resources(pl330);
2178
2179         kfree(pl330);
2180         pi->pl330_data = NULL;
2181 }
2182
2183 /* forward declaration */
2184 static struct amba_driver pl330_driver;
2185
2186 static inline struct dma_pl330_chan *
2187 to_pchan(struct dma_chan *ch)
2188 {
2189         if (!ch)
2190                 return NULL;
2191
2192         return container_of(ch, struct dma_pl330_chan, chan);
2193 }
2194
2195 static inline struct dma_pl330_desc *
2196 to_desc(struct dma_async_tx_descriptor *tx)
2197 {
2198         return container_of(tx, struct dma_pl330_desc, txd);
2199 }
2200
2201 static inline void free_desc_list(struct list_head *list)
2202 {
2203         struct dma_pl330_dmac *pdmac;
2204         struct dma_pl330_desc *desc;
2205         struct dma_pl330_chan *pch = NULL;
2206         unsigned long flags;
2207
2208         /* Finish off the work list */
2209         list_for_each_entry(desc, list, node) {
2210                 dma_async_tx_callback callback;
2211                 void *param;
2212
2213                 /* All desc in a list belong to same channel */
2214                 pch = desc->pchan;
2215                 callback = desc->txd.callback;
2216                 param = desc->txd.callback_param;
2217
2218                 if (callback)
2219                         callback(param);
2220
2221                 desc->pchan = NULL;
2222         }
2223
2224         /* pch will be unset if list was empty */
2225         if (!pch)
2226                 return;
2227
2228         pdmac = pch->dmac;
2229
2230         spin_lock_irqsave(&pdmac->pool_lock, flags);
2231         list_splice_tail_init(list, &pdmac->desc_pool);
2232         spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2233 }
2234
2235 static inline void handle_cyclic_desc_list(struct list_head *list)
2236 {
2237         struct dma_pl330_desc *desc;
2238         struct dma_pl330_chan *pch = NULL;
2239         unsigned long flags;
2240
2241         list_for_each_entry(desc, list, node) {
2242                 dma_async_tx_callback callback;
2243
2244                 /* Change status to reload it */
2245                 desc->status = PREP;
2246                 pch = desc->pchan;
2247                 callback = desc->txd.callback;
2248                 if (callback)
2249                         callback(desc->txd.callback_param);
2250         }
2251
2252         /* pch will be unset if list was empty */
2253         if (!pch)
2254                 return;
2255
2256         spin_lock_irqsave(&pch->lock, flags);
2257         list_splice_tail_init(list, &pch->work_list);
2258         spin_unlock_irqrestore(&pch->lock, flags);
2259 }
2260
2261 static inline void fill_queue(struct dma_pl330_chan *pch)
2262 {
2263         struct dma_pl330_desc *desc;
2264         int ret;
2265
2266         list_for_each_entry(desc, &pch->work_list, node) {
2267
2268                 /* If already submitted */
2269                 if (desc->status == BUSY)
2270                         continue;
2271
2272                 ret = pl330_submit_req(pch->pl330_chid,
2273                                                 &desc->req);
2274                 if (!ret) {
2275                         desc->status = BUSY;
2276                 } else if (ret == -EAGAIN) {
2277                         /* QFull or DMAC Dying */
2278                         break;
2279                 } else {
2280                         /* Unacceptable request */
2281                         desc->status = DONE;
2282                         dev_err(pch->dmac->pif.dev, "%s:%d Bad Desc(%d)\n",
2283                                         __func__, __LINE__, desc->txd.cookie);
2284                         tasklet_schedule(&pch->task);
2285                 }
2286         }
2287 }
2288
2289 static void pl330_tasklet(unsigned long data)
2290 {
2291         struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
2292         struct dma_pl330_desc *desc, *_dt;
2293         unsigned long flags;
2294         LIST_HEAD(list);
2295
2296         spin_lock_irqsave(&pch->lock, flags);
2297
2298         /* Pick up ripe tomatoes */
2299         list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
2300                 if (desc->status == DONE) {
2301                         if (!pch->cyclic)
2302                                 dma_cookie_complete(&desc->txd);
2303                         list_move_tail(&desc->node, &list);
2304                 }
2305
2306         /* Try to submit a req imm. next to the last completed cookie */
2307         fill_queue(pch);
2308
2309         /* Make sure the PL330 Channel thread is active */
2310         pl330_chan_ctrl(pch->pl330_chid, PL330_OP_START);
2311
2312         spin_unlock_irqrestore(&pch->lock, flags);
2313
2314         if (pch->cyclic)
2315                 handle_cyclic_desc_list(&list);
2316         else
2317                 free_desc_list(&list);
2318 }
2319
2320 static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
2321 {
2322         struct dma_pl330_desc *desc = token;
2323         struct dma_pl330_chan *pch = desc->pchan;
2324         unsigned long flags;
2325
2326         /* If desc aborted */
2327         if (!pch)
2328                 return;
2329
2330         spin_lock_irqsave(&pch->lock, flags);
2331
2332         desc->status = DONE;
2333
2334         spin_unlock_irqrestore(&pch->lock, flags);
2335
2336         tasklet_schedule(&pch->task);
2337 }
2338
2339 static bool pl330_dt_filter(struct dma_chan *chan, void *param)
2340 {
2341         struct dma_pl330_filter_args *fargs = param;
2342
2343         if (chan->device != &fargs->pdmac->ddma)
2344                 return false;
2345
2346         return (chan->chan_id == fargs->chan_id);
2347 }
2348
2349 bool pl330_filter(struct dma_chan *chan, void *param)
2350 {
2351         u8 *peri_id;
2352
2353         if (chan->device->dev->driver != &pl330_driver.drv)
2354                 return false;
2355
2356         peri_id = chan->private;
2357         return *peri_id == (unsigned)param;
2358 }
2359 EXPORT_SYMBOL(pl330_filter);
2360
2361 static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
2362                                                 struct of_dma *ofdma)
2363 {
2364         int count = dma_spec->args_count;
2365         struct dma_pl330_dmac *pdmac = ofdma->of_dma_data;
2366         struct dma_pl330_filter_args fargs;
2367         dma_cap_mask_t cap;
2368
2369         if (!pdmac)
2370                 return NULL;
2371
2372         if (count != 1)
2373                 return NULL;
2374
2375         fargs.pdmac = pdmac;
2376         fargs.chan_id = dma_spec->args[0];
2377
2378         dma_cap_zero(cap);
2379         dma_cap_set(DMA_SLAVE, cap);
2380         dma_cap_set(DMA_CYCLIC, cap);
2381
2382         return dma_request_channel(cap, pl330_dt_filter, &fargs);
2383 }
2384
2385 static int pl330_alloc_chan_resources(struct dma_chan *chan)
2386 {
2387         struct dma_pl330_chan *pch = to_pchan(chan);
2388         struct dma_pl330_dmac *pdmac = pch->dmac;
2389         unsigned long flags;
2390
2391         spin_lock_irqsave(&pch->lock, flags);
2392
2393         dma_cookie_init(chan);
2394         pch->cyclic = false;
2395
2396         pch->pl330_chid = pl330_request_channel(&pdmac->pif);
2397         if (!pch->pl330_chid) {
2398                 spin_unlock_irqrestore(&pch->lock, flags);
2399                 return -ENOMEM;
2400         }
2401
2402         tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
2403
2404         spin_unlock_irqrestore(&pch->lock, flags);
2405
2406         return 1;
2407 }
2408
2409 static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg)
2410 {
2411         struct dma_pl330_chan *pch = to_pchan(chan);
2412         struct dma_pl330_desc *desc, *_dt;
2413         unsigned long flags;
2414         struct dma_pl330_dmac *pdmac = pch->dmac;
2415         struct dma_slave_config *slave_config;
2416         LIST_HEAD(list);
2417
2418         switch (cmd) {
2419         case DMA_TERMINATE_ALL:
2420                 spin_lock_irqsave(&pch->lock, flags);
2421
2422                 /* FLUSH the PL330 Channel thread */
2423                 pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
2424
2425                 /* Mark all desc done */
2426                 list_for_each_entry_safe(desc, _dt, &pch->work_list , node) {
2427                         desc->status = DONE;
2428                         list_move_tail(&desc->node, &list);
2429                 }
2430
2431                 list_splice_tail_init(&list, &pdmac->desc_pool);
2432                 spin_unlock_irqrestore(&pch->lock, flags);
2433                 break;
2434         case DMA_SLAVE_CONFIG:
2435                 slave_config = (struct dma_slave_config *)arg;
2436
2437                 if (slave_config->direction == DMA_MEM_TO_DEV) {
2438                         if (slave_config->dst_addr)
2439                                 pch->fifo_addr = slave_config->dst_addr;
2440                         if (slave_config->dst_addr_width)
2441                                 pch->burst_sz = __ffs(slave_config->dst_addr_width);
2442                         if (slave_config->dst_maxburst)
2443                                 pch->burst_len = slave_config->dst_maxburst;
2444                 } else if (slave_config->direction == DMA_DEV_TO_MEM) {
2445                         if (slave_config->src_addr)
2446                                 pch->fifo_addr = slave_config->src_addr;
2447                         if (slave_config->src_addr_width)
2448                                 pch->burst_sz = __ffs(slave_config->src_addr_width);
2449                         if (slave_config->src_maxburst)
2450                                 pch->burst_len = slave_config->src_maxburst;
2451                 }
2452                 break;
2453         default:
2454                 dev_err(pch->dmac->pif.dev, "Not supported command.\n");
2455                 return -ENXIO;
2456         }
2457
2458         return 0;
2459 }
2460
2461 static void pl330_free_chan_resources(struct dma_chan *chan)
2462 {
2463         struct dma_pl330_chan *pch = to_pchan(chan);
2464         unsigned long flags;
2465
2466         tasklet_kill(&pch->task);
2467
2468         spin_lock_irqsave(&pch->lock, flags);
2469
2470         pl330_release_channel(pch->pl330_chid);
2471         pch->pl330_chid = NULL;
2472
2473         if (pch->cyclic)
2474                 list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
2475
2476         spin_unlock_irqrestore(&pch->lock, flags);
2477 }
2478
2479 static enum dma_status
2480 pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2481                  struct dma_tx_state *txstate)
2482 {
2483         return dma_cookie_status(chan, cookie, txstate);
2484 }
2485
2486 static void pl330_issue_pending(struct dma_chan *chan)
2487 {
2488         pl330_tasklet((unsigned long) to_pchan(chan));
2489 }
2490
2491 /*
2492  * We returned the last one of the circular list of descriptor(s)
2493  * from prep_xxx, so the argument to submit corresponds to the last
2494  * descriptor of the list.
2495  */
2496 static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
2497 {
2498         struct dma_pl330_desc *desc, *last = to_desc(tx);
2499         struct dma_pl330_chan *pch = to_pchan(tx->chan);
2500         dma_cookie_t cookie;
2501         unsigned long flags;
2502
2503         spin_lock_irqsave(&pch->lock, flags);
2504
2505         /* Assign cookies to all nodes */
2506         while (!list_empty(&last->node)) {
2507                 desc = list_entry(last->node.next, struct dma_pl330_desc, node);
2508
2509                 dma_cookie_assign(&desc->txd);
2510
2511                 list_move_tail(&desc->node, &pch->work_list);
2512         }
2513
2514         cookie = dma_cookie_assign(&last->txd);
2515         list_add_tail(&last->node, &pch->work_list);
2516         spin_unlock_irqrestore(&pch->lock, flags);
2517
2518         return cookie;
2519 }
2520
2521 static inline void _init_desc(struct dma_pl330_desc *desc)
2522 {
2523         desc->pchan = NULL;
2524         desc->req.x = &desc->px;
2525         desc->req.token = desc;
2526         desc->rqcfg.swap = SWAP_NO;
2527         desc->rqcfg.privileged = 0;
2528         desc->rqcfg.insnaccess = 0;
2529         desc->rqcfg.scctl = SCCTRL0;
2530         desc->rqcfg.dcctl = DCCTRL0;
2531         desc->req.cfg = &desc->rqcfg;
2532         desc->req.xfer_cb = dma_pl330_rqcb;
2533         desc->txd.tx_submit = pl330_tx_submit;
2534
2535         INIT_LIST_HEAD(&desc->node);
2536 }
2537
2538 /* Returns the number of descriptors added to the DMAC pool */
2539 static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
2540 {
2541         struct dma_pl330_desc *desc;
2542         unsigned long flags;
2543         int i;
2544
2545         if (!pdmac)
2546                 return 0;
2547
2548         desc = kmalloc(count * sizeof(*desc), flg);
2549         if (!desc)
2550                 return 0;
2551
2552         spin_lock_irqsave(&pdmac->pool_lock, flags);
2553
2554         for (i = 0; i < count; i++) {
2555                 _init_desc(&desc[i]);
2556                 list_add_tail(&desc[i].node, &pdmac->desc_pool);
2557         }
2558
2559         spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2560
2561         return count;
2562 }
2563
2564 static struct dma_pl330_desc *
2565 pluck_desc(struct dma_pl330_dmac *pdmac)
2566 {
2567         struct dma_pl330_desc *desc = NULL;
2568         unsigned long flags;
2569
2570         if (!pdmac)
2571                 return NULL;
2572
2573         spin_lock_irqsave(&pdmac->pool_lock, flags);
2574
2575         if (!list_empty(&pdmac->desc_pool)) {
2576                 desc = list_entry(pdmac->desc_pool.next,
2577                                 struct dma_pl330_desc, node);
2578
2579                 list_del_init(&desc->node);
2580
2581                 desc->status = PREP;
2582                 desc->txd.callback = NULL;
2583         }
2584
2585         spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2586
2587         return desc;
2588 }
2589
2590 static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
2591 {
2592         struct dma_pl330_dmac *pdmac = pch->dmac;
2593         u8 *peri_id = pch->chan.private;
2594         struct dma_pl330_desc *desc;
2595
2596         /* Pluck one desc from the pool of DMAC */
2597         desc = pluck_desc(pdmac);
2598
2599         /* If the DMAC pool is empty, alloc new */
2600         if (!desc) {
2601                 if (!add_desc(pdmac, GFP_ATOMIC, 1))
2602                         return NULL;
2603
2604                 /* Try again */
2605                 desc = pluck_desc(pdmac);
2606                 if (!desc) {
2607                         dev_err(pch->dmac->pif.dev,
2608                                 "%s:%d ALERT!\n", __func__, __LINE__);
2609                         return NULL;
2610                 }
2611         }
2612
2613         /* Initialize the descriptor */
2614         desc->pchan = pch;
2615         desc->txd.cookie = 0;
2616         async_tx_ack(&desc->txd);
2617
2618         desc->req.peri = peri_id ? pch->chan.chan_id : 0;
2619         desc->rqcfg.pcfg = &pch->dmac->pif.pcfg;
2620
2621         dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
2622
2623         return desc;
2624 }
2625
2626 static inline void fill_px(struct pl330_xfer *px,
2627                 dma_addr_t dst, dma_addr_t src, size_t len)
2628 {
2629         px->next = NULL;
2630         px->bytes = len;
2631         px->dst_addr = dst;
2632         px->src_addr = src;
2633 }
2634
2635 static struct dma_pl330_desc *
2636 __pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
2637                 dma_addr_t src, size_t len)
2638 {
2639         struct dma_pl330_desc *desc = pl330_get_desc(pch);
2640
2641         if (!desc) {
2642                 dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
2643                         __func__, __LINE__);
2644                 return NULL;
2645         }
2646
2647         /*
2648          * Ideally we should lookout for reqs bigger than
2649          * those that can be programmed with 256 bytes of
2650          * MC buffer, but considering a req size is seldom
2651          * going to be word-unaligned and more than 200MB,
2652          * we take it easy.
2653          * Also, should the limit is reached we'd rather
2654          * have the platform increase MC buffer size than
2655          * complicating this API driver.
2656          */
2657         fill_px(&desc->px, dst, src, len);
2658
2659         return desc;
2660 }
2661
2662 /* Call after fixing burst size */
2663 static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
2664 {
2665         struct dma_pl330_chan *pch = desc->pchan;
2666         struct pl330_info *pi = &pch->dmac->pif;
2667         int burst_len;
2668
2669         burst_len = pi->pcfg.data_bus_width / 8;
2670         burst_len *= pi->pcfg.data_buf_dep;
2671         burst_len >>= desc->rqcfg.brst_size;
2672
2673         /* src/dst_burst_len can't be more than 16 */
2674         if (burst_len > 16)
2675                 burst_len = 16;
2676
2677         while (burst_len > 1) {
2678                 if (!(len % (burst_len << desc->rqcfg.brst_size)))
2679                         break;
2680                 burst_len--;
2681         }
2682
2683         return burst_len;
2684 }
2685
2686 static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
2687                 struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
2688                 size_t period_len, enum dma_transfer_direction direction,
2689                 unsigned long flags, void *context)
2690 {
2691         struct dma_pl330_desc *desc;
2692         struct dma_pl330_chan *pch = to_pchan(chan);
2693         dma_addr_t dst;
2694         dma_addr_t src;
2695
2696         desc = pl330_get_desc(pch);
2697         if (!desc) {
2698                 dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
2699                         __func__, __LINE__);
2700                 return NULL;
2701         }
2702
2703         switch (direction) {
2704         case DMA_MEM_TO_DEV:
2705                 desc->rqcfg.src_inc = 1;
2706                 desc->rqcfg.dst_inc = 0;
2707                 desc->req.rqtype = MEMTODEV;
2708                 src = dma_addr;
2709                 dst = pch->fifo_addr;
2710                 break;
2711         case DMA_DEV_TO_MEM:
2712                 desc->rqcfg.src_inc = 0;
2713                 desc->rqcfg.dst_inc = 1;
2714                 desc->req.rqtype = DEVTOMEM;
2715                 src = pch->fifo_addr;
2716                 dst = dma_addr;
2717                 break;
2718         default:
2719                 dev_err(pch->dmac->pif.dev, "%s:%d Invalid dma direction\n",
2720                 __func__, __LINE__);
2721                 return NULL;
2722         }
2723
2724         desc->rqcfg.brst_size = pch->burst_sz;
2725         desc->rqcfg.brst_len = 1;
2726
2727         pch->cyclic = true;
2728
2729         fill_px(&desc->px, dst, src, period_len);
2730
2731         return &desc->txd;
2732 }
2733
2734 static struct dma_async_tx_descriptor *
2735 pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
2736                 dma_addr_t src, size_t len, unsigned long flags)
2737 {
2738         struct dma_pl330_desc *desc;
2739         struct dma_pl330_chan *pch = to_pchan(chan);
2740         struct pl330_info *pi;
2741         int burst;
2742
2743         if (unlikely(!pch || !len))
2744                 return NULL;
2745
2746         pi = &pch->dmac->pif;
2747
2748         desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
2749         if (!desc)
2750                 return NULL;
2751
2752         desc->rqcfg.src_inc = 1;
2753         desc->rqcfg.dst_inc = 1;
2754         desc->req.rqtype = MEMTOMEM;
2755
2756         /* Select max possible burst size */
2757         burst = pi->pcfg.data_bus_width / 8;
2758
2759         while (burst > 1) {
2760                 if (!(len % burst))
2761                         break;
2762                 burst /= 2;
2763         }
2764
2765         desc->rqcfg.brst_size = 0;
2766         while (burst != (1 << desc->rqcfg.brst_size))
2767                 desc->rqcfg.brst_size++;
2768
2769         desc->rqcfg.brst_len = get_burst_len(desc, len);
2770
2771         desc->txd.flags = flags;
2772
2773         return &desc->txd;
2774 }
2775
2776 static struct dma_async_tx_descriptor *
2777 pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2778                 unsigned int sg_len, enum dma_transfer_direction direction,
2779                 unsigned long flg, void *context)
2780 {
2781         struct dma_pl330_desc *first, *desc = NULL;
2782         struct dma_pl330_chan *pch = to_pchan(chan);
2783         struct scatterlist *sg;
2784         unsigned long flags;
2785         int i;
2786         dma_addr_t addr;
2787
2788         if (unlikely(!pch || !sgl || !sg_len))
2789                 return NULL;
2790
2791         addr = pch->fifo_addr;
2792
2793         first = NULL;
2794
2795         for_each_sg(sgl, sg, sg_len, i) {
2796
2797                 desc = pl330_get_desc(pch);
2798                 if (!desc) {
2799                         struct dma_pl330_dmac *pdmac = pch->dmac;
2800
2801                         dev_err(pch->dmac->pif.dev,
2802                                 "%s:%d Unable to fetch desc\n",
2803                                 __func__, __LINE__);
2804                         if (!first)
2805                                 return NULL;
2806
2807                         spin_lock_irqsave(&pdmac->pool_lock, flags);
2808
2809                         while (!list_empty(&first->node)) {
2810                                 desc = list_entry(first->node.next,
2811                                                 struct dma_pl330_desc, node);
2812                                 list_move_tail(&desc->node, &pdmac->desc_pool);
2813                         }
2814
2815                         list_move_tail(&first->node, &pdmac->desc_pool);
2816
2817                         spin_unlock_irqrestore(&pdmac->pool_lock, flags);
2818
2819                         return NULL;
2820                 }
2821
2822                 if (!first)
2823                         first = desc;
2824                 else
2825                         list_add_tail(&desc->node, &first->node);
2826
2827                 if (direction == DMA_MEM_TO_DEV) {
2828                         desc->rqcfg.src_inc = 1;
2829                         desc->rqcfg.dst_inc = 0;
2830                         desc->req.rqtype = MEMTODEV;
2831                         fill_px(&desc->px,
2832                                 addr, sg_dma_address(sg), sg_dma_len(sg));
2833                 } else {
2834                         desc->rqcfg.src_inc = 0;
2835                         desc->rqcfg.dst_inc = 1;
2836                         desc->req.rqtype = DEVTOMEM;
2837                         fill_px(&desc->px,
2838                                 sg_dma_address(sg), addr, sg_dma_len(sg));
2839                 }
2840
2841                 desc->rqcfg.brst_size = pch->burst_sz;
2842                 desc->rqcfg.brst_len = 1;
2843         }
2844
2845         /* Return the last desc in the chain */
2846         desc->txd.flags = flg;
2847         return &desc->txd;
2848 }
2849
2850 static irqreturn_t pl330_irq_handler(int irq, void *data)
2851 {
2852         if (pl330_update(data))
2853                 return IRQ_HANDLED;
2854         else
2855                 return IRQ_NONE;
2856 }
2857
2858 static int
2859 pl330_probe(struct amba_device *adev, const struct amba_id *id)
2860 {
2861         struct dma_pl330_platdata *pdat;
2862         struct dma_pl330_dmac *pdmac;
2863         struct dma_pl330_chan *pch, *_p;
2864         struct pl330_info *pi;
2865         struct dma_device *pd;
2866         struct resource *res;
2867         int i, ret, irq;
2868         int num_chan;
2869
2870         pdat = adev->dev.platform_data;
2871
2872         /* Allocate a new DMAC and its Channels */
2873         pdmac = devm_kzalloc(&adev->dev, sizeof(*pdmac), GFP_KERNEL);
2874         if (!pdmac) {
2875                 dev_err(&adev->dev, "unable to allocate mem\n");
2876                 return -ENOMEM;
2877         }
2878
2879         pi = &pdmac->pif;
2880         pi->dev = &adev->dev;
2881         pi->pl330_data = NULL;
2882         pi->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
2883
2884         res = &adev->res;
2885         pi->base = devm_ioremap_resource(&adev->dev, res);
2886         if (IS_ERR(pi->base))
2887                 return PTR_ERR(pi->base);
2888
2889         amba_set_drvdata(adev, pdmac);
2890
2891         irq = adev->irq[0];
2892         ret = request_irq(irq, pl330_irq_handler, 0,
2893                         dev_name(&adev->dev), pi);
2894         if (ret)
2895                 return ret;
2896
2897         pi->pcfg.periph_id = adev->periphid;
2898         ret = pl330_add(pi);
2899         if (ret)
2900                 goto probe_err1;
2901
2902         INIT_LIST_HEAD(&pdmac->desc_pool);
2903         spin_lock_init(&pdmac->pool_lock);
2904
2905         /* Create a descriptor pool of default size */
2906         if (!add_desc(pdmac, GFP_KERNEL, NR_DEFAULT_DESC))
2907                 dev_warn(&adev->dev, "unable to allocate desc\n");
2908
2909         pd = &pdmac->ddma;
2910         INIT_LIST_HEAD(&pd->channels);
2911
2912         /* Initialize channel parameters */
2913         if (pdat)
2914                 num_chan = max_t(int, pdat->nr_valid_peri, pi->pcfg.num_chan);
2915         else
2916                 num_chan = max_t(int, pi->pcfg.num_peri, pi->pcfg.num_chan);
2917
2918         pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
2919         if (!pdmac->peripherals) {
2920                 ret = -ENOMEM;
2921                 dev_err(&adev->dev, "unable to allocate pdmac->peripherals\n");
2922                 goto probe_err2;
2923         }
2924
2925         for (i = 0; i < num_chan; i++) {
2926                 pch = &pdmac->peripherals[i];
2927                 if (!adev->dev.of_node)
2928                         pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
2929                 else
2930                         pch->chan.private = adev->dev.of_node;
2931
2932                 INIT_LIST_HEAD(&pch->work_list);
2933                 spin_lock_init(&pch->lock);
2934                 pch->pl330_chid = NULL;
2935                 pch->chan.device = pd;
2936                 pch->dmac = pdmac;
2937
2938                 /* Add the channel to the DMAC list */
2939                 list_add_tail(&pch->chan.device_node, &pd->channels);
2940         }
2941
2942         pd->dev = &adev->dev;
2943         if (pdat) {
2944                 pd->cap_mask = pdat->cap_mask;
2945         } else {
2946                 dma_cap_set(DMA_MEMCPY, pd->cap_mask);
2947                 if (pi->pcfg.num_peri) {
2948                         dma_cap_set(DMA_SLAVE, pd->cap_mask);
2949                         dma_cap_set(DMA_CYCLIC, pd->cap_mask);
2950                         dma_cap_set(DMA_PRIVATE, pd->cap_mask);
2951                 }
2952         }
2953
2954         pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
2955         pd->device_free_chan_resources = pl330_free_chan_resources;
2956         pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
2957         pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
2958         pd->device_tx_status = pl330_tx_status;
2959         pd->device_prep_slave_sg = pl330_prep_slave_sg;
2960         pd->device_control = pl330_control;
2961         pd->device_issue_pending = pl330_issue_pending;
2962
2963         ret = dma_async_device_register(pd);
2964         if (ret) {
2965                 dev_err(&adev->dev, "unable to register DMAC\n");
2966                 goto probe_err3;
2967         }
2968
2969         if (adev->dev.of_node) {
2970                 ret = of_dma_controller_register(adev->dev.of_node,
2971                                          of_dma_pl330_xlate, pdmac);
2972                 if (ret) {
2973                         dev_err(&adev->dev,
2974                         "unable to register DMA to the generic DT DMA helpers\n");
2975                 }
2976         }
2977
2978         dev_info(&adev->dev,
2979                 "Loaded driver for PL330 DMAC-%d\n", adev->periphid);
2980         dev_info(&adev->dev,
2981                 "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
2982                 pi->pcfg.data_buf_dep,
2983                 pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
2984                 pi->pcfg.num_peri, pi->pcfg.num_events);
2985
2986         return 0;
2987 probe_err3:
2988         amba_set_drvdata(adev, NULL);
2989
2990         /* Idle the DMAC */
2991         list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
2992                         chan.device_node) {
2993
2994                 /* Remove the channel */
2995                 list_del(&pch->chan.device_node);
2996
2997                 /* Flush the channel */
2998                 pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
2999                 pl330_free_chan_resources(&pch->chan);
3000         }
3001 probe_err2:
3002         pl330_del(pi);
3003 probe_err1:
3004         free_irq(irq, pi);
3005
3006         return ret;
3007 }
3008
3009 static int pl330_remove(struct amba_device *adev)
3010 {
3011         struct dma_pl330_dmac *pdmac = amba_get_drvdata(adev);
3012         struct dma_pl330_chan *pch, *_p;
3013         struct pl330_info *pi;
3014         int irq;
3015
3016         if (!pdmac)
3017                 return 0;
3018
3019         if (adev->dev.of_node)
3020                 of_dma_controller_free(adev->dev.of_node);
3021
3022         dma_async_device_unregister(&pdmac->ddma);
3023         amba_set_drvdata(adev, NULL);
3024
3025         /* Idle the DMAC */
3026         list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
3027                         chan.device_node) {
3028
3029                 /* Remove the channel */
3030                 list_del(&pch->chan.device_node);
3031
3032                 /* Flush the channel */
3033                 pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
3034                 pl330_free_chan_resources(&pch->chan);
3035         }
3036
3037         pi = &pdmac->pif;
3038
3039         pl330_del(pi);
3040
3041         irq = adev->irq[0];
3042         free_irq(irq, pi);
3043
3044         return 0;
3045 }
3046
3047 static struct amba_id pl330_ids[] = {
3048         {
3049                 .id     = 0x00041330,
3050                 .mask   = 0x000fffff,
3051         },
3052         { 0, 0 },
3053 };
3054
3055 MODULE_DEVICE_TABLE(amba, pl330_ids);
3056
3057 static struct amba_driver pl330_driver = {
3058         .drv = {
3059                 .owner = THIS_MODULE,
3060                 .name = "dma-pl330",
3061         },
3062         .id_table = pl330_ids,
3063         .probe = pl330_probe,
3064         .remove = pl330_remove,
3065 };
3066
3067 module_amba_driver(pl330_driver);
3068
3069 MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
3070 MODULE_DESCRIPTION("API Driver for PL330 DMAC");
3071 MODULE_LICENSE("GPL");