drivers/gpu/drm/i915/intel_display.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *      Eric Anholt <eric@anholt.net>
  25  */
  26
  27 #include <linux/dmi.h>
  28 #include <linux/module.h>
  29 #include <linux/input.h>
  30 #include <linux/i2c.h>
  31 #include <linux/kernel.h>
  32 #include <linux/slab.h>
  33 #include <linux/vgaarb.h>
  34 #include <drm/drm_edid.h>
  35 #include <drm/drmP.h>
  36 #include "intel_drv.h"
  37 #include <drm/i915_drm.h>
  38 #include "i915_drv.h"
  39 #include "i915_trace.h"
  40 #include <drm/drm_dp_helper.h>
  41 #include <drm/drm_crtc_helper.h>
  42 #include <linux/dma_remapping.h>
  43
  44 bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
  45 static void intel_increase_pllclock(struct drm_crtc *crtc);
  46 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
  47
  48 typedef struct {
  49         int     min, max;
  50 } intel_range_t;
  51
  52 typedef struct {
  53         int     dot_limit;
  54         int     p2_slow, p2_fast;
  55 } intel_p2_t;
  56
  57 #define INTEL_P2_NUM                  2
  58 typedef struct intel_limit intel_limit_t;
  59 struct intel_limit {
  60         intel_range_t   dot, vco, n, m, m1, m2, p, p1;
  61         intel_p2_t          p2;
  62 };
  63
  64 /* FDI */
  65 #define IRONLAKE_FDI_FREQ               2700000 /* in kHz for mode->clock */
  66
  67 int
  68 intel_pch_rawclk(struct drm_device *dev)
  69 {
  70         struct drm_i915_private *dev_priv = dev->dev_private;
  71
  72         WARN_ON(!HAS_PCH_SPLIT(dev));
  73
  74         return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
  75 }
  76
  77 static inline u32 /* units of 100MHz */
  78 intel_fdi_link_freq(struct drm_device *dev)
  79 {
  80         if (IS_GEN5(dev)) {
  81                 struct drm_i915_private *dev_priv = dev->dev_private;
  82                 return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
  83         } else
  84                 return 27;
  85 }
  86
  87 static const intel_limit_t intel_limits_i8xx_dvo = {
  88         .dot = { .min = 25000, .max = 350000 },
  89         .vco = { .min = 930000, .max = 1400000 },
  90         .n = { .min = 3, .max = 16 },
  91         .m = { .min = 96, .max = 140 },
  92         .m1 = { .min = 18, .max = 26 },
  93         .m2 = { .min = 6, .max = 16 },
  94         .p = { .min = 4, .max = 128 },
  95         .p1 = { .min = 2, .max = 33 },
  96         .p2 = { .dot_limit = 165000,
  97                 .p2_slow = 4, .p2_fast = 2 },
  98 };
  99
 100 static const intel_limit_t intel_limits_i8xx_lvds = {
 101         .dot = { .min = 25000, .max = 350000 },
 102         .vco = { .min = 930000, .max = 1400000 },
 103         .n = { .min = 3, .max = 16 },
 104         .m = { .min = 96, .max = 140 },
 105         .m1 = { .min = 18, .max = 26 },
 106         .m2 = { .min = 6, .max = 16 },
 107         .p = { .min = 4, .max = 128 },
 108         .p1 = { .min = 1, .max = 6 },
 109         .p2 = { .dot_limit = 165000,
 110                 .p2_slow = 14, .p2_fast = 7 },
 111 };
 112
 113 static const intel_limit_t intel_limits_i9xx_sdvo = {
 114         .dot = { .min = 20000, .max = 400000 },
 115         .vco = { .min = 1400000, .max = 2800000 },
 116         .n = { .min = 1, .max = 6 },
 117         .m = { .min = 70, .max = 120 },
 118         .m1 = { .min = 8, .max = 18 },
 119         .m2 = { .min = 3, .max = 7 },
 120         .p = { .min = 5, .max = 80 },
 121         .p1 = { .min = 1, .max = 8 },
 122         .p2 = { .dot_limit = 200000,
 123                 .p2_slow = 10, .p2_fast = 5 },
 124 };
 125
 126 static const intel_limit_t intel_limits_i9xx_lvds = {
 127         .dot = { .min = 20000, .max = 400000 },
 128         .vco = { .min = 1400000, .max = 2800000 },
 129         .n = { .min = 1, .max = 6 },
 130         .m = { .min = 70, .max = 120 },
 131         .m1 = { .min = 8, .max = 18 },
 132         .m2 = { .min = 3, .max = 7 },
 133         .p = { .min = 7, .max = 98 },
 134         .p1 = { .min = 1, .max = 8 },
 135         .p2 = { .dot_limit = 112000,
 136                 .p2_slow = 14, .p2_fast = 7 },
 137 };
 138
 139
 140 static const intel_limit_t intel_limits_g4x_sdvo = {
 141         .dot = { .min = 25000, .max = 270000 },
 142         .vco = { .min = 1750000, .max = 3500000},
 143         .n = { .min = 1, .max = 4 },
 144         .m = { .min = 104, .max = 138 },
 145         .m1 = { .min = 17, .max = 23 },
 146         .m2 = { .min = 5, .max = 11 },
 147         .p = { .min = 10, .max = 30 },
 148         .p1 = { .min = 1, .max = 3},
 149         .p2 = { .dot_limit = 270000,
 150                 .p2_slow = 10,
 151                 .p2_fast = 10
 152         },
 153 };
 154
 155 static const intel_limit_t intel_limits_g4x_hdmi = {
 156         .dot = { .min = 22000, .max = 400000 },
 157         .vco = { .min = 1750000, .max = 3500000},
 158         .n = { .min = 1, .max = 4 },
 159         .m = { .min = 104, .max = 138 },
 160         .m1 = { .min = 16, .max = 23 },
 161         .m2 = { .min = 5, .max = 11 },
 162         .p = { .min = 5, .max = 80 },
 163         .p1 = { .min = 1, .max = 8},
 164         .p2 = { .dot_limit = 165000,
 165                 .p2_slow = 10, .p2_fast = 5 },
 166 };
 167
 168 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
 169         .dot = { .min = 20000, .max = 115000 },
 170         .vco = { .min = 1750000, .max = 3500000 },
 171         .n = { .min = 1, .max = 3 },
 172         .m = { .min = 104, .max = 138 },
 173         .m1 = { .min = 17, .max = 23 },
 174         .m2 = { .min = 5, .max = 11 },
 175         .p = { .min = 28, .max = 112 },
 176         .p1 = { .min = 2, .max = 8 },
 177         .p2 = { .dot_limit = 0,
 178                 .p2_slow = 14, .p2_fast = 14
 179         },
 180 };
 181
 182 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
 183         .dot = { .min = 80000, .max = 224000 },
 184         .vco = { .min = 1750000, .max = 3500000 },
 185         .n = { .min = 1, .max = 3 },
 186         .m = { .min = 104, .max = 138 },
 187         .m1 = { .min = 17, .max = 23 },
 188         .m2 = { .min = 5, .max = 11 },
 189         .p = { .min = 14, .max = 42 },
 190         .p1 = { .min = 2, .max = 6 },
 191         .p2 = { .dot_limit = 0,
 192                 .p2_slow = 7, .p2_fast = 7
 193         },
 194 };
 195
 196 static const intel_limit_t intel_limits_pineview_sdvo = {
 197         .dot = { .min = 20000, .max = 400000},
 198         .vco = { .min = 1700000, .max = 3500000 },
 199         /* Pineview's Ncounter is a ring counter */
 200         .n = { .min = 3, .max = 6 },
 201         .m = { .min = 2, .max = 256 },
 202         /* Pineview only has one combined m divider, which we treat as m2. */
 203         .m1 = { .min = 0, .max = 0 },
 204         .m2 = { .min = 0, .max = 254 },
 205         .p = { .min = 5, .max = 80 },
 206         .p1 = { .min = 1, .max = 8 },
 207         .p2 = { .dot_limit = 200000,
 208                 .p2_slow = 10, .p2_fast = 5 },
 209 };
 210
 211 static const intel_limit_t intel_limits_pineview_lvds = {
 212         .dot = { .min = 20000, .max = 400000 },
 213         .vco = { .min = 1700000, .max = 3500000 },
 214         .n = { .min = 3, .max = 6 },
 215         .m = { .min = 2, .max = 256 },
 216         .m1 = { .min = 0, .max = 0 },
 217         .m2 = { .min = 0, .max = 254 },
 218         .p = { .min = 7, .max = 112 },
 219         .p1 = { .min = 1, .max = 8 },
 220         .p2 = { .dot_limit = 112000,
 221                 .p2_slow = 14, .p2_fast = 14 },
 222 };
 223
 224 /* Ironlake / Sandybridge
 225  *
 226  * We calculate clock using (register_value + 2) for N/M1/M2, so here
 227  * the range value for them is (actual_value - 2).
 228  */
 229 static const intel_limit_t intel_limits_ironlake_dac = {
 230         .dot = { .min = 25000, .max = 350000 },
 231         .vco = { .min = 1760000, .max = 3510000 },
 232         .n = { .min = 1, .max = 5 },
 233         .m = { .min = 79, .max = 127 },
 234         .m1 = { .min = 12, .max = 22 },
 235         .m2 = { .min = 5, .max = 9 },
 236         .p = { .min = 5, .max = 80 },
 237         .p1 = { .min = 1, .max = 8 },
 238         .p2 = { .dot_limit = 225000,
 239                 .p2_slow = 10, .p2_fast = 5 },
 240 };
 241
 242 static const intel_limit_t intel_limits_ironlake_single_lvds = {
 243         .dot = { .min = 25000, .max = 350000 },
 244         .vco = { .min = 1760000, .max = 3510000 },
 245         .n = { .min = 1, .max = 3 },
 246         .m = { .min = 79, .max = 118 },
 247         .m1 = { .min = 12, .max = 22 },
 248         .m2 = { .min = 5, .max = 9 },
 249         .p = { .min = 28, .max = 112 },
 250         .p1 = { .min = 2, .max = 8 },
 251         .p2 = { .dot_limit = 225000,
 252                 .p2_slow = 14, .p2_fast = 14 },
 253 };
 254
 255 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
 256         .dot = { .min = 25000, .max = 350000 },
 257         .vco = { .min = 1760000, .max = 3510000 },
 258         .n = { .min = 1, .max = 3 },
 259         .m = { .min = 79, .max = 127 },
 260         .m1 = { .min = 12, .max = 22 },
 261         .m2 = { .min = 5, .max = 9 },
 262         .p = { .min = 14, .max = 56 },
 263         .p1 = { .min = 2, .max = 8 },
 264         .p2 = { .dot_limit = 225000,
 265                 .p2_slow = 7, .p2_fast = 7 },
 266 };
 267
 268 /* LVDS 100mhz refclk limits. */
 269 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
 270         .dot = { .min = 25000, .max = 350000 },
 271         .vco = { .min = 1760000, .max = 3510000 },
 272         .n = { .min = 1, .max = 2 },
 273         .m = { .min = 79, .max = 126 },
 274         .m1 = { .min = 12, .max = 22 },
 275         .m2 = { .min = 5, .max = 9 },
 276         .p = { .min = 28, .max = 112 },
 277         .p1 = { .min = 2, .max = 8 },
 278         .p2 = { .dot_limit = 225000,
 279                 .p2_slow = 14, .p2_fast = 14 },
 280 };
 281
 282 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
 283         .dot = { .min = 25000, .max = 350000 },
 284         .vco = { .min = 1760000, .max = 3510000 },
 285         .n = { .min = 1, .max = 3 },
 286         .m = { .min = 79, .max = 126 },
 287         .m1 = { .min = 12, .max = 22 },
 288         .m2 = { .min = 5, .max = 9 },
 289         .p = { .min = 14, .max = 42 },
 290         .p1 = { .min = 2, .max = 6 },
 291         .p2 = { .dot_limit = 225000,
 292                 .p2_slow = 7, .p2_fast = 7 },
 293 };
 294
 295 static const intel_limit_t intel_limits_vlv_dac = {
 296         .dot = { .min = 25000, .max = 270000 },
 297         .vco = { .min = 4000000, .max = 6000000 },
 298         .n = { .min = 1, .max = 7 },
 299         .m = { .min = 22, .max = 450 }, /* guess */
 300         .m1 = { .min = 2, .max = 3 },
 301         .m2 = { .min = 11, .max = 156 },
 302         .p = { .min = 10, .max = 30 },
 303         .p1 = { .min = 1, .max = 3 },
 304         .p2 = { .dot_limit = 270000,
 305                 .p2_slow = 2, .p2_fast = 20 },
 306 };
 307
 308 static const intel_limit_t intel_limits_vlv_hdmi = {
 309         .dot = { .min = 25000, .max = 270000 },
 310         .vco = { .min = 4000000, .max = 6000000 },
 311         .n = { .min = 1, .max = 7 },
 312         .m = { .min = 60, .max = 300 }, /* guess */
 313         .m1 = { .min = 2, .max = 3 },
 314         .m2 = { .min = 11, .max = 156 },
 315         .p = { .min = 10, .max = 30 },
 316         .p1 = { .min = 2, .max = 3 },
 317         .p2 = { .dot_limit = 270000,
 318                 .p2_slow = 2, .p2_fast = 20 },
 319 };
 320
 321 static const intel_limit_t intel_limits_vlv_dp = {
 322         .dot = { .min = 25000, .max = 270000 },
 323         .vco = { .min = 4000000, .max = 6000000 },
 324         .n = { .min = 1, .max = 7 },
 325         .m = { .min = 22, .max = 450 },
 326         .m1 = { .min = 2, .max = 3 },
 327         .m2 = { .min = 11, .max = 156 },
 328         .p = { .min = 10, .max = 30 },
 329         .p1 = { .min = 1, .max = 3 },
 330         .p2 = { .dot_limit = 270000,
 331                 .p2_slow = 2, .p2_fast = 20 },
 332 };
 333
 334 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
 335                                                 int refclk)
 336 {
 337         struct drm_device *dev = crtc->dev;
 338         const intel_limit_t *limit;
 339
 340         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 341                 if (intel_is_dual_link_lvds(dev)) {
 342                         if (refclk == 100000)
 343                                 limit = &intel_limits_ironlake_dual_lvds_100m;
 344                         else
 345                                 limit = &intel_limits_ironlake_dual_lvds;
 346                 } else {
 347                         if (refclk == 100000)
 348                                 limit = &intel_limits_ironlake_single_lvds_100m;
 349                         else
 350                                 limit = &intel_limits_ironlake_single_lvds;
 351                 }
 352         } else
 353                 limit = &intel_limits_ironlake_dac;
 354
 355         return limit;
 356 }
 357
 358 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
 359 {
 360         struct drm_device *dev = crtc->dev;
 361         const intel_limit_t *limit;
 362
 363         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 364                 if (intel_is_dual_link_lvds(dev))
 365                         limit = &intel_limits_g4x_dual_channel_lvds;
 366                 else
 367                         limit = &intel_limits_g4x_single_channel_lvds;
 368         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
 369                    intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
 370                 limit = &intel_limits_g4x_hdmi;
 371         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
 372                 limit = &intel_limits_g4x_sdvo;
 373         } else /* The option is for other outputs */
 374                 limit = &intel_limits_i9xx_sdvo;
 375
 376         return limit;
 377 }
 378
 379 static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
 380 {
 381         struct drm_device *dev = crtc->dev;
 382         const intel_limit_t *limit;
 383
 384         if (HAS_PCH_SPLIT(dev))
 385                 limit = intel_ironlake_limit(crtc, refclk);
 386         else if (IS_G4X(dev)) {
 387                 limit = intel_g4x_limit(crtc);
 388         } else if (IS_PINEVIEW(dev)) {
 389                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 390                         limit = &intel_limits_pineview_lvds;
 391                 else
 392                         limit = &intel_limits_pineview_sdvo;
 393         } else if (IS_VALLEYVIEW(dev)) {
 394                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG))
 395                         limit = &intel_limits_vlv_dac;
 396                 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
 397                         limit = &intel_limits_vlv_hdmi;
 398                 else
 399                         limit = &intel_limits_vlv_dp;
 400         } else if (!IS_GEN2(dev)) {
 401                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 402                         limit = &intel_limits_i9xx_lvds;
 403                 else
 404                         limit = &intel_limits_i9xx_sdvo;
 405         } else {
 406                 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
 407                         limit = &intel_limits_i8xx_lvds;
 408                 else
 409                         limit = &intel_limits_i8xx_dvo;
 410         }
 411         return limit;
 412 }
 413
 414 /* m1 is reserved as 0 in Pineview, n is a ring counter */
 415 static void pineview_clock(int refclk, intel_clock_t *clock)
 416 {
 417         clock->m = clock->m2 + 2;
 418         clock->p = clock->p1 * clock->p2;
 419         clock->vco = refclk * clock->m / clock->n;
 420         clock->dot = clock->vco / clock->p;
 421 }
 422
 423 static uint32_t i9xx_dpll_compute_m(struct dpll *dpll)
 424 {
 425         return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
 426 }
 427
 428 static void i9xx_clock(int refclk, intel_clock_t *clock)
 429 {
 430         clock->m = i9xx_dpll_compute_m(clock);
 431         clock->p = clock->p1 * clock->p2;
 432         clock->vco = refclk * clock->m / (clock->n + 2);
 433         clock->dot = clock->vco / clock->p;
 434 }
 435
 436 /**
 437  * Returns whether any output on the specified pipe is of the specified type
 438  */
 439 bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
 440 {
 441         struct drm_device *dev = crtc->dev;
 442         struct intel_encoder *encoder;
 443
 444         for_each_encoder_on_crtc(dev, crtc, encoder)
 445                 if (encoder->type == type)
 446                         return true;
 447
 448         return false;
 449 }
 450
 451 #define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
 452 /**
 453  * Returns whether the given set of divisors are valid for a given refclk with
 454  * the given connectors.
 455  */
 456
 457 static bool intel_PLL_is_valid(struct drm_device *dev,
 458                                const intel_limit_t *limit,
 459                                const intel_clock_t *clock)
 460 {
 461         if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
 462                 INTELPllInvalid("p1 out of range\n");
 463         if (clock->p   < limit->p.min   || limit->p.max   < clock->p)
 464                 INTELPllInvalid("p out of range\n");
 465         if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
 466                 INTELPllInvalid("m2 out of range\n");
 467         if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
 468                 INTELPllInvalid("m1 out of range\n");
 469         if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev))
 470                 INTELPllInvalid("m1 <= m2\n");
 471         if (clock->m   < limit->m.min   || limit->m.max   < clock->m)
 472                 INTELPllInvalid("m out of range\n");
 473         if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
 474                 INTELPllInvalid("n out of range\n");
 475         if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
 476                 INTELPllInvalid("vco out of range\n");
 477         /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
 478          * connector, etc., rather than just a single range.
 479          */
 480         if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
 481                 INTELPllInvalid("dot out of range\n");
 482
 483         return true;
 484 }
 485
 486 static bool
 487 i9xx_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
 488                     int target, int refclk, intel_clock_t *match_clock,
 489                     intel_clock_t *best_clock)
 490 {
 491         struct drm_device *dev = crtc->dev;
 492         intel_clock_t clock;
 493         int err = target;
 494
 495         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 496                 /*
 497                  * For LVDS just rely on its current settings for dual-channel.
 498                  * We haven't figured out how to reliably set up different
 499                  * single/dual channel state, if we even can.
 500                  */
 501                 if (intel_is_dual_link_lvds(dev))
 502                         clock.p2 = limit->p2.p2_fast;
 503                 else
 504                         clock.p2 = limit->p2.p2_slow;
 505         } else {
 506                 if (target < limit->p2.dot_limit)
 507                         clock.p2 = limit->p2.p2_slow;
 508                 else
 509                         clock.p2 = limit->p2.p2_fast;
 510         }
 511
 512         memset(best_clock, 0, sizeof(*best_clock));
 513
 514         for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
 515              clock.m1++) {
 516                 for (clock.m2 = limit->m2.min;
 517                      clock.m2 <= limit->m2.max; clock.m2++) {
 518                         if (clock.m2 >= clock.m1)
 519                                 break;
 520                         for (clock.n = limit->n.min;
 521                              clock.n <= limit->n.max; clock.n++) {
 522                                 for (clock.p1 = limit->p1.min;
 523                                         clock.p1 <= limit->p1.max; clock.p1++) {
 524                                         int this_err;
 525
 526                                         i9xx_clock(refclk, &clock);
 527                                         if (!intel_PLL_is_valid(dev, limit,
 528                                                                 &clock))
 529                                                 continue;
 530                                         if (match_clock &&
 531                                             clock.p != match_clock->p)
 532                                                 continue;
 533
 534                                         this_err = abs(clock.dot - target);
 535                                         if (this_err < err) {
 536                                                 *best_clock = clock;
 537                                                 err = this_err;
 538                                         }
 539                                 }
 540                         }
 541                 }
 542         }
 543
 544         return (err != target);
 545 }
 546
 547 static bool
 548 pnv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
 549                    int target, int refclk, intel_clock_t *match_clock,
 550                    intel_clock_t *best_clock)
 551 {
 552         struct drm_device *dev = crtc->dev;
 553         intel_clock_t clock;
 554         int err = target;
 555
 556         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 557                 /*
 558                  * For LVDS just rely on its current settings for dual-channel.
 559                  * We haven't figured out how to reliably set up different
 560                  * single/dual channel state, if we even can.
 561                  */
 562                 if (intel_is_dual_link_lvds(dev))
 563                         clock.p2 = limit->p2.p2_fast;
 564                 else
 565                         clock.p2 = limit->p2.p2_slow;
 566         } else {
 567                 if (target < limit->p2.dot_limit)
 568                         clock.p2 = limit->p2.p2_slow;
 569                 else
 570                         clock.p2 = limit->p2.p2_fast;
 571         }
 572
 573         memset(best_clock, 0, sizeof(*best_clock));
 574
 575         for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
 576              clock.m1++) {
 577                 for (clock.m2 = limit->m2.min;
 578                      clock.m2 <= limit->m2.max; clock.m2++) {
 579                         for (clock.n = limit->n.min;
 580                              clock.n <= limit->n.max; clock.n++) {
 581                                 for (clock.p1 = limit->p1.min;
 582                                         clock.p1 <= limit->p1.max; clock.p1++) {
 583                                         int this_err;
 584
 585                                         pineview_clock(refclk, &clock);
 586                                         if (!intel_PLL_is_valid(dev, limit,
 587                                                                 &clock))
 588                                                 continue;
 589                                         if (match_clock &&
 590                                             clock.p != match_clock->p)
 591                                                 continue;
 592
 593                                         this_err = abs(clock.dot - target);
 594                                         if (this_err < err) {
 595                                                 *best_clock = clock;
 596                                                 err = this_err;
 597                                         }
 598                                 }
 599                         }
 600                 }
 601         }
 602
 603         return (err != target);
 604 }
 605
 606 static bool
 607 g4x_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
 608                    int target, int refclk, intel_clock_t *match_clock,
 609                    intel_clock_t *best_clock)
 610 {
 611         struct drm_device *dev = crtc->dev;
 612         intel_clock_t clock;
 613         int max_n;
 614         bool found;
 615         /* approximately equals target * 0.00585 */
 616         int err_most = (target >> 8) + (target >> 9);
 617         found = false;
 618
 619         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
 620                 if (intel_is_dual_link_lvds(dev))
 621                         clock.p2 = limit->p2.p2_fast;
 622                 else
 623                         clock.p2 = limit->p2.p2_slow;
 624         } else {
 625                 if (target < limit->p2.dot_limit)
 626                         clock.p2 = limit->p2.p2_slow;
 627                 else
 628                         clock.p2 = limit->p2.p2_fast;
 629         }
 630
 631         memset(best_clock, 0, sizeof(*best_clock));
 632         max_n = limit->n.max;
 633         /* based on hardware requirement, prefer smaller n to precision */
 634         for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
 635                 /* based on hardware requirement, prefere larger m1,m2 */
 636                 for (clock.m1 = limit->m1.max;
 637                      clock.m1 >= limit->m1.min; clock.m1--) {
 638                         for (clock.m2 = limit->m2.max;
 639                              clock.m2 >= limit->m2.min; clock.m2--) {
 640                                 for (clock.p1 = limit->p1.max;
 641                                      clock.p1 >= limit->p1.min; clock.p1--) {
 642                                         int this_err;
 643
 644                                         i9xx_clock(refclk, &clock);
 645                                         if (!intel_PLL_is_valid(dev, limit,
 646                                                                 &clock))
 647                                                 continue;
 648
 649                                         this_err = abs(clock.dot - target);
 650                                         if (this_err < err_most) {
 651                                                 *best_clock = clock;
 652                                                 err_most = this_err;
 653                                                 max_n = clock.n;
 654                                                 found = true;
 655                                         }
 656                                 }
 657                         }
 658                 }
 659         }
 660         return found;
 661 }
 662
 663 static bool
 664 vlv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
 665                    int target, int refclk, intel_clock_t *match_clock,
 666                    intel_clock_t *best_clock)
 667 {
 668         u32 p1, p2, m1, m2, vco, bestn, bestm1, bestm2, bestp1, bestp2;
 669         u32 m, n, fastclk;
 670         u32 updrate, minupdate, fracbits, p;
 671         unsigned long bestppm, ppm, absppm;
 672         int dotclk, flag;
 673
 674         flag = 0;
 675         dotclk = target * 1000;
 676         bestppm = 1000000;
 677         ppm = absppm = 0;
 678         fastclk = dotclk / (2*100);
 679         updrate = 0;
 680         minupdate = 19200;
 681         fracbits = 1;
 682         n = p = p1 = p2 = m = m1 = m2 = vco = bestn = 0;
 683         bestm1 = bestm2 = bestp1 = bestp2 = 0;
 684
 685         /* based on hardware requirement, prefer smaller n to precision */
 686         for (n = limit->n.min; n <= ((refclk) / minupdate); n++) {
 687                 updrate = refclk / n;
 688                 for (p1 = limit->p1.max; p1 > limit->p1.min; p1--) {
 689                         for (p2 = limit->p2.p2_fast+1; p2 > 0; p2--) {
 690                                 if (p2 > 10)
 691                                         p2 = p2 - 1;
 692                                 p = p1 * p2;
 693                                 /* based on hardware requirement, prefer bigger m1,m2 values */
 694                                 for (m1 = limit->m1.min; m1 <= limit->m1.max; m1++) {
 695                                         m2 = (((2*(fastclk * p * n / m1 )) +
 696                                                refclk) / (2*refclk));
 697                                         m = m1 * m2;
 698                                         vco = updrate * m;
 699                                         if (vco >= limit->vco.min && vco < limit->vco.max) {
 700                                                 ppm = 1000000 * ((vco / p) - fastclk) / fastclk;
 701                                                 absppm = (ppm > 0) ? ppm : (-ppm);
 702                                                 if (absppm < 100 && ((p1 * p2) > (bestp1 * bestp2))) {
 703                                                         bestppm = 0;
 704                                                         flag = 1;
 705                                                 }
 706                                                 if (absppm < bestppm - 10) {
 707                                                         bestppm = absppm;
 708                                                         flag = 1;
 709                                                 }
 710                                                 if (flag) {
 711                                                         bestn = n;
 712                                                         bestm1 = m1;
 713                                                         bestm2 = m2;
 714                                                         bestp1 = p1;
 715                                                         bestp2 = p2;
 716                                                         flag = 0;
 717                                                 }
 718                                         }
 719                                 }
 720                         }
 721                 }
 722         }
 723         best_clock->n = bestn;
 724         best_clock->m1 = bestm1;
 725         best_clock->m2 = bestm2;
 726         best_clock->p1 = bestp1;
 727         best_clock->p2 = bestp2;
 728
 729         return true;
 730 }
 731
 732 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
 733                                              enum pipe pipe)
 734 {
 735         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
 736         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 737
 738         return intel_crtc->config.cpu_transcoder;
 739 }
 740
 741 static void ironlake_wait_for_vblank(struct drm_device *dev, int pipe)
 742 {
 743         struct drm_i915_private *dev_priv = dev->dev_private;
 744         u32 frame, frame_reg = PIPEFRAME(pipe);
 745
 746         frame = I915_READ(frame_reg);
 747
 748         if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50))
 749                 DRM_DEBUG_KMS("vblank wait timed out\n");
 750 }
 751
 752 /**
 753  * intel_wait_for_vblank - wait for vblank on a given pipe
 754  * @dev: drm device
 755  * @pipe: pipe to wait for
 756  *
 757  * Wait for vblank to occur on a given pipe.  Needed for various bits of
 758  * mode setting code.
 759  */
 760 void intel_wait_for_vblank(struct drm_device *dev, int pipe)
 761 {
 762         struct drm_i915_private *dev_priv = dev->dev_private;
 763         int pipestat_reg = PIPESTAT(pipe);
 764
 765         if (INTEL_INFO(dev)->gen >= 5) {
 766                 ironlake_wait_for_vblank(dev, pipe);
 767                 return;
 768         }
 769
 770         /* Clear existing vblank status. Note this will clear any other
 771          * sticky status fields as well.
 772          *
 773          * This races with i915_driver_irq_handler() with the result
 774          * that either function could miss a vblank event.  Here it is not
 775          * fatal, as we will either wait upon the next vblank interrupt or
 776          * timeout.  Generally speaking intel_wait_for_vblank() is only
 777          * called during modeset at which time the GPU should be idle and
 778          * should *not* be performing page flips and thus not waiting on
 779          * vblanks...
 780          * Currently, the result of us stealing a vblank from the irq
 781          * handler is that a single frame will be skipped during swapbuffers.
 782          */
 783         I915_WRITE(pipestat_reg,
 784                    I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
 785
 786         /* Wait for vblank interrupt bit to set */
 787         if (wait_for(I915_READ(pipestat_reg) &
 788                      PIPE_VBLANK_INTERRUPT_STATUS,
 789                      50))
 790                 DRM_DEBUG_KMS("vblank wait timed out\n");
 791 }
 792
 793 /*
 794  * intel_wait_for_pipe_off - wait for pipe to turn off
 795  * @dev: drm device
 796  * @pipe: pipe to wait for
 797  *
 798  * After disabling a pipe, we can't wait for vblank in the usual way,
 799  * spinning on the vblank interrupt status bit, since we won't actually
 800  * see an interrupt when the pipe is disabled.
 801  *
 802  * On Gen4 and above:
 803  *   wait for the pipe register state bit to turn off
 804  *
 805  * Otherwise:
 806  *   wait for the display line value to settle (it usually
 807  *   ends up stopping at the start of the next frame).
 808  *
 809  */
 810 void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
 811 {
 812         struct drm_i915_private *dev_priv = dev->dev_private;
 813         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
 814                                                                       pipe);
 815
 816         if (INTEL_INFO(dev)->gen >= 4) {
 817                 int reg = PIPECONF(cpu_transcoder);
 818
 819                 /* Wait for the Pipe State to go off */
 820                 if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
 821                              100))
 822                         WARN(1, "pipe_off wait timed out\n");
 823         } else {
 824                 u32 last_line, line_mask;
 825                 int reg = PIPEDSL(pipe);
 826                 unsigned long timeout = jiffies + msecs_to_jiffies(100);
 827
 828                 if (IS_GEN2(dev))
 829                         line_mask = DSL_LINEMASK_GEN2;
 830                 else
 831                         line_mask = DSL_LINEMASK_GEN3;
 832
 833                 /* Wait for the display line to settle */
 834                 do {
 835                         last_line = I915_READ(reg) & line_mask;
 836                         mdelay(5);
 837                 } while (((I915_READ(reg) & line_mask) != last_line) &&
 838                          time_after(timeout, jiffies));
 839                 if (time_after(jiffies, timeout))
 840                         WARN(1, "pipe_off wait timed out\n");
 841         }
 842 }
 843
 844 /*
 845  * ibx_digital_port_connected - is the specified port connected?
 846  * @dev_priv: i915 private structure
 847  * @port: the port to test
 848  *
 849  * Returns true if @port is connected, false otherwise.
 850  */
 851 bool ibx_digital_port_connected(struct drm_i915_private *dev_priv,
 852                                 struct intel_digital_port *port)
 853 {
 854         u32 bit;
 855
 856         if (HAS_PCH_IBX(dev_priv->dev)) {
 857                 switch(port->port) {
 858                 case PORT_B:
 859                         bit = SDE_PORTB_HOTPLUG;
 860                         break;
 861                 case PORT_C:
 862                         bit = SDE_PORTC_HOTPLUG;
 863                         break;
 864                 case PORT_D:
 865                         bit = SDE_PORTD_HOTPLUG;
 866                         break;
 867                 default:
 868                         return true;
 869                 }
 870         } else {
 871                 switch(port->port) {
 872                 case PORT_B:
 873                         bit = SDE_PORTB_HOTPLUG_CPT;
 874                         break;
 875                 case PORT_C:
 876                         bit = SDE_PORTC_HOTPLUG_CPT;
 877                         break;
 878                 case PORT_D:
 879                         bit = SDE_PORTD_HOTPLUG_CPT;
 880                         break;
 881                 default:
 882                         return true;
 883                 }
 884         }
 885
 886         return I915_READ(SDEISR) & bit;
 887 }
 888
 889 static const char *state_string(bool enabled)
 890 {
 891         return enabled ? "on" : "off";
 892 }
 893
 894 /* Only for pre-ILK configs */
 895 static void assert_pll(struct drm_i915_private *dev_priv,
 896                        enum pipe pipe, bool state)
 897 {
 898         int reg;
 899         u32 val;
 900         bool cur_state;
 901
 902         reg = DPLL(pipe);
 903         val = I915_READ(reg);
 904         cur_state = !!(val & DPLL_VCO_ENABLE);
 905         WARN(cur_state != state,
 906              "PLL state assertion failure (expected %s, current %s)\n",
 907              state_string(state), state_string(cur_state));
 908 }
 909 #define assert_pll_enabled(d, p) assert_pll(d, p, true)
 910 #define assert_pll_disabled(d, p) assert_pll(d, p, false)
 911
 912 static struct intel_shared_dpll *
 913 intel_crtc_to_shared_dpll(struct intel_crtc *crtc)
 914 {
 915         struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
 916
 917         if (crtc->config.shared_dpll < 0)
 918                 return NULL;
 919
 920         return &dev_priv->shared_dplls[crtc->config.shared_dpll];
 921 }
 922
 923 /* For ILK+ */
 924 static void assert_shared_dpll(struct drm_i915_private *dev_priv,
 925                                struct intel_shared_dpll *pll,
 926                                bool state)
 927 {
 928         bool cur_state;
 929         struct intel_dpll_hw_state hw_state;
 930
 931         if (HAS_PCH_LPT(dev_priv->dev)) {
 932                 DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n");
 933                 return;
 934         }
 935
 936         if (WARN (!pll,
 937                   "asserting DPLL %s with no DPLL\n", state_string(state)))
 938                 return;
 939
 940         cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
 941         WARN(cur_state != state,
 942              "%s assertion failure (expected %s, current %s)\n",
 943              pll->name, state_string(state), state_string(cur_state));
 944 }
 945 #define assert_shared_dpll_enabled(d, p) assert_shared_dpll(d, p, true)
 946 #define assert_shared_dpll_disabled(d, p) assert_shared_dpll(d, p, false)
 947
 948 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
 949                           enum pipe pipe, bool state)
 950 {
 951         int reg;
 952         u32 val;
 953         bool cur_state;
 954         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
 955                                                                       pipe);
 956
 957         if (HAS_DDI(dev_priv->dev)) {
 958                 /* DDI does not have a specific FDI_TX register */
 959                 reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
 960                 val = I915_READ(reg);
 961                 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
 962         } else {
 963                 reg = FDI_TX_CTL(pipe);
 964                 val = I915_READ(reg);
 965                 cur_state = !!(val & FDI_TX_ENABLE);
 966         }
 967         WARN(cur_state != state,
 968              "FDI TX state assertion failure (expected %s, current %s)\n",
 969              state_string(state), state_string(cur_state));
 970 }
 971 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
 972 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
 973
 974 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
 975                           enum pipe pipe, bool state)
 976 {
 977         int reg;
 978         u32 val;
 979         bool cur_state;
 980
 981         reg = FDI_RX_CTL(pipe);
 982         val = I915_READ(reg);
 983         cur_state = !!(val & FDI_RX_ENABLE);
 984         WARN(cur_state != state,
 985              "FDI RX state assertion failure (expected %s, current %s)\n",
 986              state_string(state), state_string(cur_state));
 987 }
 988 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
 989 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
 990
 991 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
 992                                       enum pipe pipe)
 993 {
 994         int reg;
 995         u32 val;
 996
 997         /* ILK FDI PLL is always enabled */
 998         if (dev_priv->info->gen == 5)
 999                 return;
1000
1001         /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1002         if (HAS_DDI(dev_priv->dev))
1003                 return;
1004
1005         reg = FDI_TX_CTL(pipe);
1006         val = I915_READ(reg);
1007         WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1008 }
1009
1010 static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv,
1011                                       enum pipe pipe)
1012 {
1013         int reg;
1014         u32 val;
1015
1016         reg = FDI_RX_CTL(pipe);
1017         val = I915_READ(reg);
1018         WARN(!(val & FDI_RX_PLL_ENABLE), "FDI RX PLL assertion failure, should be active but is disabled\n");
1019 }
1020
1021 static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1022                                   enum pipe pipe)
1023 {
1024         int pp_reg, lvds_reg;
1025         u32 val;
1026         enum pipe panel_pipe = PIPE_A;
1027         bool locked = true;
1028
1029         if (HAS_PCH_SPLIT(dev_priv->dev)) {
1030                 pp_reg = PCH_PP_CONTROL;
1031                 lvds_reg = PCH_LVDS;
1032         } else {
1033                 pp_reg = PP_CONTROL;
1034                 lvds_reg = LVDS;
1035         }
1036
1037         val = I915_READ(pp_reg);
1038         if (!(val & PANEL_POWER_ON) ||
1039             ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
1040                 locked = false;
1041
1042         if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
1043                 panel_pipe = PIPE_B;
1044
1045         WARN(panel_pipe == pipe && locked,
1046              "panel assertion failure, pipe %c regs locked\n",
1047              pipe_name(pipe));
1048 }
1049
1050 void assert_pipe(struct drm_i915_private *dev_priv,
1051                  enum pipe pipe, bool state)
1052 {
1053         int reg;
1054         u32 val;
1055         bool cur_state;
1056         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1057                                                                       pipe);
1058
1059         /* if we need the pipe A quirk it must be always on */
1060         if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
1061                 state = true;
1062
1063         if (!intel_display_power_enabled(dev_priv->dev,
1064                                 POWER_DOMAIN_TRANSCODER(cpu_transcoder))) {
1065                 cur_state = false;
1066         } else {
1067                 reg = PIPECONF(cpu_transcoder);
1068                 val = I915_READ(reg);
1069                 cur_state = !!(val & PIPECONF_ENABLE);
1070         }
1071
1072         WARN(cur_state != state,
1073              "pipe %c assertion failure (expected %s, current %s)\n",
1074              pipe_name(pipe), state_string(state), state_string(cur_state));
1075 }
1076
1077 static void assert_plane(struct drm_i915_private *dev_priv,
1078                          enum plane plane, bool state)
1079 {
1080         int reg;
1081         u32 val;
1082         bool cur_state;
1083
1084         reg = DSPCNTR(plane);
1085         val = I915_READ(reg);
1086         cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1087         WARN(cur_state != state,
1088              "plane %c assertion failure (expected %s, current %s)\n",
1089              plane_name(plane), state_string(state), state_string(cur_state));
1090 }
1091
1092 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1093 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1094
1095 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1096                                    enum pipe pipe)
1097 {
1098         struct drm_device *dev = dev_priv->dev;
1099         int reg, i;
1100         u32 val;
1101         int cur_pipe;
1102
1103         /* Primary planes are fixed to pipes on gen4+ */
1104         if (INTEL_INFO(dev)->gen >= 4) {
1105                 reg = DSPCNTR(pipe);
1106                 val = I915_READ(reg);
1107                 WARN((val & DISPLAY_PLANE_ENABLE),
1108                      "plane %c assertion failure, should be disabled but not\n",
1109                      plane_name(pipe));
1110                 return;
1111         }
1112
1113         /* Need to check both planes against the pipe */
1114         for (i = 0; i < INTEL_INFO(dev)->num_pipes; i++) {
1115                 reg = DSPCNTR(i);
1116                 val = I915_READ(reg);
1117                 cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1118                         DISPPLANE_SEL_PIPE_SHIFT;
1119                 WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
1120                      "plane %c assertion failure, should be off on pipe %c but is still active\n",
1121                      plane_name(i), pipe_name(pipe));
1122         }
1123 }
1124
1125 static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
1126                                     enum pipe pipe)
1127 {
1128         struct drm_device *dev = dev_priv->dev;
1129         int reg, i;
1130         u32 val;
1131
1132         if (IS_VALLEYVIEW(dev)) {
1133                 for (i = 0; i < dev_priv->num_plane; i++) {
1134                         reg = SPCNTR(pipe, i);
1135                         val = I915_READ(reg);
1136                         WARN((val & SP_ENABLE),
1137                              "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1138                              sprite_name(pipe, i), pipe_name(pipe));
1139                 }
1140         } else if (INTEL_INFO(dev)->gen >= 7) {
1141                 reg = SPRCTL(pipe);
1142                 val = I915_READ(reg);
1143                 WARN((val & SPRITE_ENABLE),
1144                      "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1145                      plane_name(pipe), pipe_name(pipe));
1146         } else if (INTEL_INFO(dev)->gen >= 5) {
1147                 reg = DVSCNTR(pipe);
1148                 val = I915_READ(reg);
1149                 WARN((val & DVS_ENABLE),
1150                      "sprite %c assertion failure, should be off on pipe %c but is still active\n",
1151                      plane_name(pipe), pipe_name(pipe));
1152         }
1153 }
1154
1155 static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
1156 {
1157         u32 val;
1158         bool enabled;
1159
1160         if (HAS_PCH_LPT(dev_priv->dev)) {
1161                 DRM_DEBUG_DRIVER("LPT does not has PCH refclk, skipping check\n");
1162                 return;
1163         }
1164
1165         val = I915_READ(PCH_DREF_CONTROL);
1166         enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
1167                             DREF_SUPERSPREAD_SOURCE_MASK));
1168         WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
1169 }
1170
1171 static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
1172                                            enum pipe pipe)
1173 {
1174         int reg;
1175         u32 val;
1176         bool enabled;
1177
1178         reg = PCH_TRANSCONF(pipe);
1179         val = I915_READ(reg);
1180         enabled = !!(val & TRANS_ENABLE);
1181         WARN(enabled,
1182              "transcoder assertion failed, should be off on pipe %c but is still active\n",
1183              pipe_name(pipe));
1184 }
1185
1186 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1187                             enum pipe pipe, u32 port_sel, u32 val)
1188 {
1189         if ((val & DP_PORT_EN) == 0)
1190                 return false;
1191
1192         if (HAS_PCH_CPT(dev_priv->dev)) {
1193                 u32     trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
1194                 u32     trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
1195                 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1196                         return false;
1197         } else {
1198                 if ((val & DP_PIPE_MASK) != (pipe << 30))
1199                         return false;
1200         }
1201         return true;
1202 }
1203
1204 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1205                               enum pipe pipe, u32 val)
1206 {
1207         if ((val & SDVO_ENABLE) == 0)
1208                 return false;
1209
1210         if (HAS_PCH_CPT(dev_priv->dev)) {
1211                 if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe))
1212                         return false;
1213         } else {
1214                 if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe))
1215                         return false;
1216         }
1217         return true;
1218 }
1219
1220 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1221                               enum pipe pipe, u32 val)
1222 {
1223         if ((val & LVDS_PORT_EN) == 0)
1224                 return false;
1225
1226         if (HAS_PCH_CPT(dev_priv->dev)) {
1227                 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1228                         return false;
1229         } else {
1230                 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1231                         return false;
1232         }
1233         return true;
1234 }
1235
1236 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1237                               enum pipe pipe, u32 val)
1238 {
1239         if ((val & ADPA_DAC_ENABLE) == 0)
1240                 return false;
1241         if (HAS_PCH_CPT(dev_priv->dev)) {
1242                 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1243                         return false;
1244         } else {
1245                 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1246                         return false;
1247         }
1248         return true;
1249 }
1250
1251 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1252                                    enum pipe pipe, int reg, u32 port_sel)
1253 {
1254         u32 val = I915_READ(reg);
1255         WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
1256              "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1257              reg, pipe_name(pipe));
1258
1259         WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
1260              && (val & DP_PIPEB_SELECT),
1261              "IBX PCH dp port still using transcoder B\n");
1262 }
1263
1264 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1265                                      enum pipe pipe, int reg)
1266 {
1267         u32 val = I915_READ(reg);
1268         WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
1269              "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1270              reg, pipe_name(pipe));
1271
1272         WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
1273              && (val & SDVO_PIPE_B_SELECT),
1274              "IBX PCH hdmi port still using transcoder B\n");
1275 }
1276
1277 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1278                                       enum pipe pipe)
1279 {
1280         int reg;
1281         u32 val;
1282
1283         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1284         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1285         assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1286
1287         reg = PCH_ADPA;
1288         val = I915_READ(reg);
1289         WARN(adpa_pipe_enabled(dev_priv, pipe, val),
1290              "PCH VGA enabled on transcoder %c, should be disabled\n",
1291              pipe_name(pipe));
1292
1293         reg = PCH_LVDS;
1294         val = I915_READ(reg);
1295         WARN(lvds_pipe_enabled(dev_priv, pipe, val),
1296              "PCH LVDS enabled on transcoder %c, should be disabled\n",
1297              pipe_name(pipe));
1298
1299         assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB);
1300         assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC);
1301         assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
1302 }
1303
1304 /**
1305  * intel_enable_pll - enable a PLL
1306  * @dev_priv: i915 private structure
1307  * @pipe: pipe PLL to enable
1308  *
1309  * Enable @pipe's PLL so we can start pumping pixels from a plane.  Check to
1310  * make sure the PLL reg is writable first though, since the panel write
1311  * protect mechanism may be enabled.
1312  *
1313  * Note!  This is for pre-ILK only.
1314  *
1315  * Unfortunately needed by dvo_ns2501 since the dvo depends on it running.
1316  */
1317 static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1318 {
1319         int reg;
1320         u32 val;
1321
1322         assert_pipe_disabled(dev_priv, pipe);
1323
1324         /* No really, not for ILK+ */
1325         BUG_ON(!IS_VALLEYVIEW(dev_priv->dev) && dev_priv->info->gen >= 5);
1326
1327         /* PLL is protected by panel, make sure we can write it */
1328         if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
1329                 assert_panel_unlocked(dev_priv, pipe);
1330
1331         reg = DPLL(pipe);
1332         val = I915_READ(reg);
1333         val |= DPLL_VCO_ENABLE;
1334
1335         /* We do this three times for luck */
1336         I915_WRITE(reg, val);
1337         POSTING_READ(reg);
1338         udelay(150); /* wait for warmup */
1339         I915_WRITE(reg, val);
1340         POSTING_READ(reg);
1341         udelay(150); /* wait for warmup */
1342         I915_WRITE(reg, val);
1343         POSTING_READ(reg);
1344         udelay(150); /* wait for warmup */
1345 }
1346
1347 /**
1348  * intel_disable_pll - disable a PLL
1349  * @dev_priv: i915 private structure
1350  * @pipe: pipe PLL to disable
1351  *
1352  * Disable the PLL for @pipe, making sure the pipe is off first.
1353  *
1354  * Note!  This is for pre-ILK only.
1355  */
1356 static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1357 {
1358         int reg;
1359         u32 val;
1360
1361         /* Don't disable pipe A or pipe A PLLs if needed */
1362         if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1363                 return;
1364
1365         /* Make sure the pipe isn't still relying on us */
1366         assert_pipe_disabled(dev_priv, pipe);
1367
1368         reg = DPLL(pipe);
1369         val = I915_READ(reg);
1370         val &= ~DPLL_VCO_ENABLE;
1371         I915_WRITE(reg, val);
1372         POSTING_READ(reg);
1373 }
1374
1375 void vlv_wait_port_ready(struct drm_i915_private *dev_priv, int port)
1376 {
1377         u32 port_mask;
1378
1379         if (!port)
1380                 port_mask = DPLL_PORTB_READY_MASK;
1381         else
1382                 port_mask = DPLL_PORTC_READY_MASK;
1383
1384         if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000))
1385                 WARN(1, "timed out waiting for port %c ready: 0x%08x\n",
1386                      'B' + port, I915_READ(DPLL(0)));
1387 }
1388
1389 /**
1390  * ironlake_enable_shared_dpll - enable PCH PLL
1391  * @dev_priv: i915 private structure
1392  * @pipe: pipe PLL to enable
1393  *
1394  * The PCH PLL needs to be enabled before the PCH transcoder, since it
1395  * drives the transcoder clock.
1396  */
1397 static void ironlake_enable_shared_dpll(struct intel_crtc *crtc)
1398 {
1399         struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
1400         struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1401
1402         /* PCH PLLs only available on ILK, SNB and IVB */
1403         BUG_ON(dev_priv->info->gen < 5);
1404         if (WARN_ON(pll == NULL))
1405                 return;
1406
1407         if (WARN_ON(pll->refcount == 0))
1408                 return;
1409
1410         DRM_DEBUG_KMS("enable %s (active %d, on? %d)for crtc %d\n",
1411                       pll->name, pll->active, pll->on,
1412                       crtc->base.base.id);
1413
1414         if (pll->active++) {
1415                 WARN_ON(!pll->on);
1416                 assert_shared_dpll_enabled(dev_priv, pll);
1417                 return;
1418         }
1419         WARN_ON(pll->on);
1420
1421         DRM_DEBUG_KMS("enabling %s\n", pll->name);
1422         pll->enable(dev_priv, pll);
1423         pll->on = true;
1424 }
1425
1426 static void intel_disable_shared_dpll(struct intel_crtc *crtc)
1427 {
1428         struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
1429         struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
1430
1431         /* PCH only available on ILK+ */
1432         BUG_ON(dev_priv->info->gen < 5);
1433         if (WARN_ON(pll == NULL))
1434                return;
1435
1436         if (WARN_ON(pll->refcount == 0))
1437                 return;
1438
1439         DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n",
1440                       pll->name, pll->active, pll->on,
1441                       crtc->base.base.id);
1442
1443         if (WARN_ON(pll->active == 0)) {
1444                 assert_shared_dpll_disabled(dev_priv, pll);
1445                 return;
1446         }
1447
1448         assert_shared_dpll_enabled(dev_priv, pll);
1449         WARN_ON(!pll->on);
1450         if (--pll->active)
1451                 return;
1452
1453         DRM_DEBUG_KMS("disabling %s\n", pll->name);
1454         pll->disable(dev_priv, pll);
1455         pll->on = false;
1456 }
1457
1458 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1459                                            enum pipe pipe)
1460 {
1461         struct drm_device *dev = dev_priv->dev;
1462         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1463         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1464         uint32_t reg, val, pipeconf_val;
1465
1466         /* PCH only available on ILK+ */
1467         BUG_ON(dev_priv->info->gen < 5);
1468
1469         /* Make sure PCH DPLL is enabled */
1470         assert_shared_dpll_enabled(dev_priv,
1471                                    intel_crtc_to_shared_dpll(intel_crtc));
1472
1473         /* FDI must be feeding us bits for PCH ports */
1474         assert_fdi_tx_enabled(dev_priv, pipe);
1475         assert_fdi_rx_enabled(dev_priv, pipe);
1476
1477         if (HAS_PCH_CPT(dev)) {
1478                 /* Workaround: Set the timing override bit before enabling the
1479                  * pch transcoder. */
1480                 reg = TRANS_CHICKEN2(pipe);
1481                 val = I915_READ(reg);
1482                 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1483                 I915_WRITE(reg, val);
1484         }
1485
1486         reg = PCH_TRANSCONF(pipe);
1487         val = I915_READ(reg);
1488         pipeconf_val = I915_READ(PIPECONF(pipe));
1489
1490         if (HAS_PCH_IBX(dev_priv->dev)) {
1491                 /*
1492                  * make the BPC in transcoder be consistent with
1493                  * that in pipeconf reg.
1494                  */
1495                 val &= ~PIPECONF_BPC_MASK;
1496                 val |= pipeconf_val & PIPECONF_BPC_MASK;
1497         }
1498
1499         val &= ~TRANS_INTERLACE_MASK;
1500         if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1501                 if (HAS_PCH_IBX(dev_priv->dev) &&
1502                     intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO))
1503                         val |= TRANS_LEGACY_INTERLACED_ILK;
1504                 else
1505                         val |= TRANS_INTERLACED;
1506         else
1507                 val |= TRANS_PROGRESSIVE;
1508
1509         I915_WRITE(reg, val | TRANS_ENABLE);
1510         if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
1511                 DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
1512 }
1513
1514 static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1515                                       enum transcoder cpu_transcoder)
1516 {
1517         u32 val, pipeconf_val;
1518
1519         /* PCH only available on ILK+ */
1520         BUG_ON(dev_priv->info->gen < 5);
1521
1522         /* FDI must be feeding us bits for PCH ports */
1523         assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
1524         assert_fdi_rx_enabled(dev_priv, TRANSCODER_A);
1525
1526         /* Workaround: set timing override bit. */
1527         val = I915_READ(_TRANSA_CHICKEN2);
1528         val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1529         I915_WRITE(_TRANSA_CHICKEN2, val);
1530
1531         val = TRANS_ENABLE;
1532         pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
1533
1534         if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
1535             PIPECONF_INTERLACED_ILK)
1536                 val |= TRANS_INTERLACED;
1537         else
1538                 val |= TRANS_PROGRESSIVE;
1539
1540         I915_WRITE(LPT_TRANSCONF, val);
1541         if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100))
1542                 DRM_ERROR("Failed to enable PCH transcoder\n");
1543 }
1544
1545 static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
1546                                             enum pipe pipe)
1547 {
1548         struct drm_device *dev = dev_priv->dev;
1549         uint32_t reg, val;
1550
1551         /* FDI relies on the transcoder */
1552         assert_fdi_tx_disabled(dev_priv, pipe);
1553         assert_fdi_rx_disabled(dev_priv, pipe);
1554
1555         /* Ports must be off as well */
1556         assert_pch_ports_disabled(dev_priv, pipe);
1557
1558         reg = PCH_TRANSCONF(pipe);
1559         val = I915_READ(reg);
1560         val &= ~TRANS_ENABLE;
1561         I915_WRITE(reg, val);
1562         /* wait for PCH transcoder off, transcoder state */
1563         if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
1564                 DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));
1565
1566         if (!HAS_PCH_IBX(dev)) {
1567                 /* Workaround: Clear the timing override chicken bit again. */
1568                 reg = TRANS_CHICKEN2(pipe);
1569                 val = I915_READ(reg);
1570                 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1571                 I915_WRITE(reg, val);
1572         }
1573 }
1574
1575 static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
1576 {
1577         u32 val;
1578
1579         val = I915_READ(LPT_TRANSCONF);
1580         val &= ~TRANS_ENABLE;
1581         I915_WRITE(LPT_TRANSCONF, val);
1582         /* wait for PCH transcoder off, transcoder state */
1583         if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50))
1584                 DRM_ERROR("Failed to disable PCH transcoder\n");
1585
1586         /* Workaround: clear timing override bit. */
1587         val = I915_READ(_TRANSA_CHICKEN2);
1588         val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1589         I915_WRITE(_TRANSA_CHICKEN2, val);
1590 }
1591
1592 /**
1593  * intel_enable_pipe - enable a pipe, asserting requirements
1594  * @dev_priv: i915 private structure
1595  * @pipe: pipe to enable
1596  * @pch_port: on ILK+, is this pipe driving a PCH port or not
1597  *
1598  * Enable @pipe, making sure that various hardware specific requirements
1599  * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1600  *
1601  * @pipe should be %PIPE_A or %PIPE_B.
1602  *
1603  * Will wait until the pipe is actually running (i.e. first vblank) before
1604  * returning.
1605  */
1606 static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
1607                               bool pch_port)
1608 {
1609         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1610                                                                       pipe);
1611         enum pipe pch_transcoder;
1612         int reg;
1613         u32 val;
1614
1615         assert_planes_disabled(dev_priv, pipe);
1616         assert_sprites_disabled(dev_priv, pipe);
1617
1618         if (HAS_PCH_LPT(dev_priv->dev))
1619                 pch_transcoder = TRANSCODER_A;
1620         else
1621                 pch_transcoder = pipe;
1622
1623         /*
1624          * A pipe without a PLL won't actually be able to drive bits from
1625          * a plane.  On ILK+ the pipe PLLs are integrated, so we don't
1626          * need the check.
1627          */
1628         if (!HAS_PCH_SPLIT(dev_priv->dev))
1629                 assert_pll_enabled(dev_priv, pipe);
1630         else {
1631                 if (pch_port) {
1632                         /* if driving the PCH, we need FDI enabled */
1633                         assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder);
1634                         assert_fdi_tx_pll_enabled(dev_priv,
1635                                                   (enum pipe) cpu_transcoder);
1636                 }
1637                 /* FIXME: assert CPU port conditions for SNB+ */
1638         }
1639
1640         reg = PIPECONF(cpu_transcoder);
1641         val = I915_READ(reg);
1642         if (val & PIPECONF_ENABLE)
1643                 return;
1644
1645         I915_WRITE(reg, val | PIPECONF_ENABLE);
1646         intel_wait_for_vblank(dev_priv->dev, pipe);
1647 }
1648
1649 /**
1650  * intel_disable_pipe - disable a pipe, asserting requirements
1651  * @dev_priv: i915 private structure
1652  * @pipe: pipe to disable
1653  *
1654  * Disable @pipe, making sure that various hardware specific requirements
1655  * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
1656  *
1657  * @pipe should be %PIPE_A or %PIPE_B.
1658  *
1659  * Will wait until the pipe has shut down before returning.
1660  */
1661 static void intel_disable_pipe(struct drm_i915_private *dev_priv,
1662                                enum pipe pipe)
1663 {
1664         enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1665                                                                       pipe);
1666         int reg;
1667         u32 val;
1668
1669         /*
1670          * Make sure planes won't keep trying to pump pixels to us,
1671          * or we might hang the display.
1672          */
1673         assert_planes_disabled(dev_priv, pipe);
1674         assert_sprites_disabled(dev_priv, pipe);
1675
1676         /* Don't disable pipe A or pipe A PLLs if needed */
1677         if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1678                 return;
1679
1680         reg = PIPECONF(cpu_transcoder);
1681         val = I915_READ(reg);
1682         if ((val & PIPECONF_ENABLE) == 0)
1683                 return;
1684
1685         I915_WRITE(reg, val & ~PIPECONF_ENABLE);
1686         intel_wait_for_pipe_off(dev_priv->dev, pipe);
1687 }
1688
1689 /*
1690  * Plane regs are double buffered, going from enabled->disabled needs a
1691  * trigger in order to latch.  The display address reg provides this.
1692  */
1693 void intel_flush_display_plane(struct drm_i915_private *dev_priv,
1694                                       enum plane plane)
1695 {
1696         if (dev_priv->info->gen >= 4)
1697                 I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane)));
1698         else
1699                 I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane)));
1700 }
1701
1702 /**
1703  * intel_enable_plane - enable a display plane on a given pipe
1704  * @dev_priv: i915 private structure
1705  * @plane: plane to enable
1706  * @pipe: pipe being fed
1707  *
1708  * Enable @plane on @pipe, making sure that @pipe is running first.
1709  */
1710 static void intel_enable_plane(struct drm_i915_private *dev_priv,
1711                                enum plane plane, enum pipe pipe)
1712 {
1713         int reg;
1714         u32 val;
1715
1716         /* If the pipe isn't enabled, we can't pump pixels and may hang */
1717         assert_pipe_enabled(dev_priv, pipe);
1718
1719         reg = DSPCNTR(plane);
1720         val = I915_READ(reg);
1721         if (val & DISPLAY_PLANE_ENABLE)
1722                 return;
1723
1724         I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
1725         intel_flush_display_plane(dev_priv, plane);
1726         intel_wait_for_vblank(dev_priv->dev, pipe);
1727 }
1728
1729 /**
1730  * intel_disable_plane - disable a display plane
1731  * @dev_priv: i915 private structure
1732  * @plane: plane to disable
1733  * @pipe: pipe consuming the data
1734  *
1735  * Disable @plane; should be an independent operation.
1736  */
1737 static void intel_disable_plane(struct drm_i915_private *dev_priv,
1738                                 enum plane plane, enum pipe pipe)
1739 {
1740         int reg;
1741         u32 val;
1742
1743         reg = DSPCNTR(plane);
1744         val = I915_READ(reg);
1745         if ((val & DISPLAY_PLANE_ENABLE) == 0)
1746                 return;
1747
1748         I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
1749         intel_flush_display_plane(dev_priv, plane);
1750         intel_wait_for_vblank(dev_priv->dev, pipe);
1751 }
1752
1753 static bool need_vtd_wa(struct drm_device *dev)
1754 {
1755 #ifdef CONFIG_INTEL_IOMMU
1756         if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped)
1757                 return true;
1758 #endif
1759         return false;
1760 }
1761
1762 int
1763 intel_pin_and_fence_fb_obj(struct drm_device *dev,
1764                            struct drm_i915_gem_object *obj,
1765                            struct intel_ring_buffer *pipelined)
1766 {
1767         struct drm_i915_private *dev_priv = dev->dev_private;
1768         u32 alignment;
1769         int ret;
1770
1771         switch (obj->tiling_mode) {
1772         case I915_TILING_NONE:
1773                 if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
1774                         alignment = 128 * 1024;
1775                 else if (INTEL_INFO(dev)->gen >= 4)
1776                         alignment = 4 * 1024;
1777                 else
1778                         alignment = 64 * 1024;
1779                 break;
1780         case I915_TILING_X:
1781                 /* pin() will align the object as required by fence */
1782                 alignment = 0;
1783                 break;
1784         case I915_TILING_Y:
1785                 /* Despite that we check this in framebuffer_init userspace can
1786                  * screw us over and change the tiling after the fact. Only
1787                  * pinned buffers can't change their tiling. */
1788                 DRM_DEBUG_DRIVER("Y tiled not allowed for scan out buffers\n");
1789                 return -EINVAL;
1790         default:
1791                 BUG();
1792         }
1793
1794         /* Note that the w/a also requires 64 PTE of padding following the
1795          * bo. We currently fill all unused PTE with the shadow page and so
1796          * we should always have valid PTE following the scanout preventing
1797          * the VT-d warning.
1798          */
1799         if (need_vtd_wa(dev) && alignment < 256 * 1024)
1800                 alignment = 256 * 1024;
1801
1802         dev_priv->mm.interruptible = false;
1803         ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
1804         if (ret)
1805                 goto err_interruptible;
1806
1807         /* Install a fence for tiled scan-out. Pre-i965 always needs a
1808          * fence, whereas 965+ only requires a fence if using
1809          * framebuffer compression.  For simplicity, we always install
1810          * a fence as the cost is not that onerous.
1811          */
1812         ret = i915_gem_object_get_fence(obj);
1813         if (ret)
1814                 goto err_unpin;
1815
1816         i915_gem_object_pin_fence(obj);
1817
1818         dev_priv->mm.interruptible = true;
1819         return 0;
1820
1821 err_unpin:
1822         i915_gem_object_unpin(obj);
1823 err_interruptible:
1824         dev_priv->mm.interruptible = true;
1825         return ret;
1826 }
1827
1828 void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
1829 {
1830         i915_gem_object_unpin_fence(obj);
1831         i915_gem_object_unpin(obj);
1832 }
1833
1834 /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel
1835  * is assumed to be a power-of-two. */
1836 unsigned long intel_gen4_compute_page_offset(int *x, int *y,
1837                                              unsigned int tiling_mode,
1838                                              unsigned int cpp,
1839                                              unsigned int pitch)
1840 {
1841         if (tiling_mode != I915_TILING_NONE) {
1842                 unsigned int tile_rows, tiles;
1843
1844                 tile_rows = *y / 8;
1845                 *y %= 8;
1846
1847                 tiles = *x / (512/cpp);
1848                 *x %= 512/cpp;
1849
1850                 return tile_rows * pitch * 8 + tiles * 4096;
1851         } else {
1852                 unsigned int offset;
1853
1854                 offset = *y * pitch + *x * cpp;
1855                 *y = 0;
1856                 *x = (offset & 4095) / cpp;
1857                 return offset & -4096;
1858         }
1859 }
1860
1861 static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
1862                              int x, int y)
1863 {
1864         struct drm_device *dev = crtc->dev;
1865         struct drm_i915_private *dev_priv = dev->dev_private;
1866         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1867         struct intel_framebuffer *intel_fb;
1868         struct drm_i915_gem_object *obj;
1869         int plane = intel_crtc->plane;
1870         unsigned long linear_offset;
1871         u32 dspcntr;
1872         u32 reg;
1873
1874         switch (plane) {
1875         case 0:
1876         case 1:
1877                 break;
1878         default:
1879                 DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane));
1880                 return -EINVAL;
1881         }
1882
1883         intel_fb = to_intel_framebuffer(fb);
1884         obj = intel_fb->obj;
1885
1886         reg = DSPCNTR(plane);
1887         dspcntr = I915_READ(reg);
1888         /* Mask out pixel format bits in case we change it */
1889         dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
1890         switch (fb->pixel_format) {
1891         case DRM_FORMAT_C8:
1892                 dspcntr |= DISPPLANE_8BPP;
1893                 break;
1894         case DRM_FORMAT_XRGB1555:
1895         case DRM_FORMAT_ARGB1555:
1896                 dspcntr |= DISPPLANE_BGRX555;
1897                 break;
1898         case DRM_FORMAT_RGB565:
1899                 dspcntr |= DISPPLANE_BGRX565;
1900                 break;
1901         case DRM_FORMAT_XRGB8888:
1902         case DRM_FORMAT_ARGB8888:
1903                 dspcntr |= DISPPLANE_BGRX888;
1904                 break;
1905         case DRM_FORMAT_XBGR8888:
1906         case DRM_FORMAT_ABGR8888:
1907                 dspcntr |= DISPPLANE_RGBX888;
1908                 break;
1909         case DRM_FORMAT_XRGB2101010:
1910         case DRM_FORMAT_ARGB2101010:
1911                 dspcntr |= DISPPLANE_BGRX101010;
1912                 break;
1913         case DRM_FORMAT_XBGR2101010:
1914         case DRM_FORMAT_ABGR2101010:
1915                 dspcntr |= DISPPLANE_RGBX101010;
1916                 break;
1917         default:
1918                 BUG();
1919         }
1920
1921         if (INTEL_INFO(dev)->gen >= 4) {
1922                 if (obj->tiling_mode != I915_TILING_NONE)
1923                         dspcntr |= DISPPLANE_TILED;
1924                 else
1925                         dspcntr &= ~DISPPLANE_TILED;
1926         }
1927
1928         if (IS_G4X(dev))
1929                 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
1930
1931         I915_WRITE(reg, dspcntr);
1932
1933         linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
1934
1935         if (INTEL_INFO(dev)->gen >= 4) {
1936                 intel_crtc->dspaddr_offset =
1937                         intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
1938                                                        fb->bits_per_pixel / 8,
1939                                                        fb->pitches[0]);
1940                 linear_offset -= intel_crtc->dspaddr_offset;
1941         } else {
1942                 intel_crtc->dspaddr_offset = linear_offset;
1943         }
1944
1945         DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
1946                       obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
1947         I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
1948         if (INTEL_INFO(dev)->gen >= 4) {
1949                 I915_MODIFY_DISPBASE(DSPSURF(plane),
1950                                      obj->gtt_offset + intel_crtc->dspaddr_offset);
1951                 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
1952                 I915_WRITE(DSPLINOFF(plane), linear_offset);
1953         } else
1954                 I915_WRITE(DSPADDR(plane), obj->gtt_offset + linear_offset);
1955         POSTING_READ(reg);
1956
1957         return 0;
1958 }
1959
1960 static int ironlake_update_plane(struct drm_crtc *crtc,
1961                                  struct drm_framebuffer *fb, int x, int y)
1962 {
1963         struct drm_device *dev = crtc->dev;
1964         struct drm_i915_private *dev_priv = dev->dev_private;
1965         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1966         struct intel_framebuffer *intel_fb;
1967         struct drm_i915_gem_object *obj;
1968         int plane = intel_crtc->plane;
1969         unsigned long linear_offset;
1970         u32 dspcntr;
1971         u32 reg;
1972
1973         switch (plane) {
1974         case 0:
1975         case 1:
1976         case 2:
1977                 break;
1978         default:
1979                 DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane));
1980                 return -EINVAL;
1981         }
1982
1983         intel_fb = to_intel_framebuffer(fb);
1984         obj = intel_fb->obj;
1985
1986         reg = DSPCNTR(plane);
1987         dspcntr = I915_READ(reg);
1988         /* Mask out pixel format bits in case we change it */
1989         dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
1990         switch (fb->pixel_format) {
1991         case DRM_FORMAT_C8:
1992                 dspcntr |= DISPPLANE_8BPP;
1993                 break;
1994         case DRM_FORMAT_RGB565:
1995                 dspcntr |= DISPPLANE_BGRX565;
1996                 break;
1997         case DRM_FORMAT_XRGB8888:
1998         case DRM_FORMAT_ARGB8888:
1999                 dspcntr |= DISPPLANE_BGRX888;
2000                 break;
2001         case DRM_FORMAT_XBGR8888:
2002         case DRM_FORMAT_ABGR8888:
2003                 dspcntr |= DISPPLANE_RGBX888;
2004                 break;
2005         case DRM_FORMAT_XRGB2101010:
2006         case DRM_FORMAT_ARGB2101010:
2007                 dspcntr |= DISPPLANE_BGRX101010;
2008                 break;
2009         case DRM_FORMAT_XBGR2101010:
2010         case DRM_FORMAT_ABGR2101010:
2011                 dspcntr |= DISPPLANE_RGBX101010;
2012                 break;
2013         default:
2014                 BUG();
2015         }
2016
2017         if (obj->tiling_mode != I915_TILING_NONE)
2018                 dspcntr |= DISPPLANE_TILED;
2019         else
2020                 dspcntr &= ~DISPPLANE_TILED;
2021
2022         /* must disable */
2023         dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
2024
2025         I915_WRITE(reg, dspcntr);
2026
2027         linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
2028         intel_crtc->dspaddr_offset =
2029                 intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
2030                                                fb->bits_per_pixel / 8,
2031                                                fb->pitches[0]);
2032         linear_offset -= intel_crtc->dspaddr_offset;
2033
2034         DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
2035                       obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
2036         I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
2037         I915_MODIFY_DISPBASE(DSPSURF(plane),
2038                              obj->gtt_offset + intel_crtc->dspaddr_offset);
2039         if (IS_HASWELL(dev)) {
2040                 I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
2041         } else {
2042                 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
2043                 I915_WRITE(DSPLINOFF(plane), linear_offset);
2044         }
2045         POSTING_READ(reg);
2046
2047         return 0;
2048 }
2049
2050 /* Assume fb object is pinned & idle & fenced and just update base pointers */
2051 static int
2052 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2053                            int x, int y, enum mode_set_atomic state)
2054 {
2055         struct drm_device *dev = crtc->dev;
2056         struct drm_i915_private *dev_priv = dev->dev_private;
2057
2058         if (dev_priv->display.disable_fbc)
2059                 dev_priv->display.disable_fbc(dev);
2060         intel_increase_pllclock(crtc);
2061
2062         return dev_priv->display.update_plane(crtc, fb, x, y);
2063 }
2064
2065 void intel_display_handle_reset(struct drm_device *dev)
2066 {
2067         struct drm_i915_private *dev_priv = dev->dev_private;
2068         struct drm_crtc *crtc;
2069
2070         /*
2071          * Flips in the rings have been nuked by the reset,
2072          * so complete all pending flips so that user space
2073          * will get its events and not get stuck.
2074          *
2075          * Also update the base address of all primary
2076          * planes to the the last fb to make sure we're
2077          * showing the correct fb after a reset.
2078          *
2079          * Need to make two loops over the crtcs so that we
2080          * don't try to grab a crtc mutex before the
2081          * pending_flip_queue really got woken up.
2082          */
2083
2084         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
2085                 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2086                 enum plane plane = intel_crtc->plane;
2087
2088                 intel_prepare_page_flip(dev, plane);
2089                 intel_finish_page_flip_plane(dev, plane);
2090         }
2091
2092         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
2093                 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2094
2095                 mutex_lock(&crtc->mutex);
2096                 if (intel_crtc->active)
2097                         dev_priv->display.update_plane(crtc, crtc->fb,
2098                                                        crtc->x, crtc->y);
2099                 mutex_unlock(&crtc->mutex);
2100         }
2101 }
2102
2103 static int
2104 intel_finish_fb(struct drm_framebuffer *old_fb)
2105 {
2106         struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
2107         struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
2108         bool was_interruptible = dev_priv->mm.interruptible;
2109         int ret;
2110
2111         /* Big Hammer, we also need to ensure that any pending
2112          * MI_WAIT_FOR_EVENT inside a user batch buffer on the
2113          * current scanout is retired before unpinning the old
2114          * framebuffer.
2115          *
2116          * This should only fail upon a hung GPU, in which case we
2117          * can safely continue.
2118          */
2119         dev_priv->mm.interruptible = false;
2120         ret = i915_gem_object_finish_gpu(obj);
2121         dev_priv->mm.interruptible = was_interruptible;
2122
2123         return ret;
2124 }
2125
2126 static void intel_crtc_update_sarea_pos(struct drm_crtc *crtc, int x, int y)
2127 {
2128         struct drm_device *dev = crtc->dev;
2129         struct drm_i915_master_private *master_priv;
2130         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2131
2132         if (!dev->primary->master)
2133                 return;
2134
2135         master_priv = dev->primary->master->driver_priv;
2136         if (!master_priv->sarea_priv)
2137                 return;
2138
2139         switch (intel_crtc->pipe) {
2140         case 0:
2141                 master_priv->sarea_priv->pipeA_x = x;
2142                 master_priv->sarea_priv->pipeA_y = y;
2143                 break;
2144         case 1:
2145                 master_priv->sarea_priv->pipeB_x = x;
2146                 master_priv->sarea_priv->pipeB_y = y;
2147                 break;
2148         default:
2149                 break;
2150         }
2151 }
2152
2153 static int
2154 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
2155                     struct drm_framebuffer *fb)
2156 {
2157         struct drm_device *dev = crtc->dev;
2158         struct drm_i915_private *dev_priv = dev->dev_private;
2159         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2160         struct drm_framebuffer *old_fb;
2161         int ret;
2162
2163         /* no fb bound */
2164         if (!fb) {
2165                 DRM_ERROR("No FB bound\n");
2166                 return 0;
2167         }
2168
2169         if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
2170                 DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n",
2171                           plane_name(intel_crtc->plane),
2172                           INTEL_INFO(dev)->num_pipes);
2173                 return -EINVAL;
2174         }
2175
2176         mutex_lock(&dev->struct_mutex);
2177         ret = intel_pin_and_fence_fb_obj(dev,
2178                                          to_intel_framebuffer(fb)->obj,
2179                                          NULL);
2180         if (ret != 0) {
2181                 mutex_unlock(&dev->struct_mutex);
2182                 DRM_ERROR("pin & fence failed\n");
2183                 return ret;
2184         }
2185
2186         ret = dev_priv->display.update_plane(crtc, fb, x, y);
2187         if (ret) {
2188                 intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj);
2189                 mutex_unlock(&dev->struct_mutex);
2190                 DRM_ERROR("failed to update base address\n");
2191                 return ret;
2192         }
2193
2194         old_fb = crtc->fb;
2195         crtc->fb = fb;
2196         crtc->x = x;
2197         crtc->y = y;
2198
2199         if (old_fb) {
2200                 if (intel_crtc->active && old_fb != fb)
2201                         intel_wait_for_vblank(dev, intel_crtc->pipe);
2202                 intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
2203         }
2204
2205         intel_update_fbc(dev);
2206         mutex_unlock(&dev->struct_mutex);
2207
2208         intel_crtc_update_sarea_pos(crtc, x, y);
2209
2210         return 0;
2211 }
2212
2213 static void intel_fdi_normal_train(struct drm_crtc *crtc)
2214 {
2215         struct drm_device *dev = crtc->dev;
2216         struct drm_i915_private *dev_priv = dev->dev_private;
2217         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2218         int pipe = intel_crtc->pipe;
2219         u32 reg, temp;
2220
2221         /* enable normal train */
2222         reg = FDI_TX_CTL(pipe);
2223         temp = I915_READ(reg);
2224         if (IS_IVYBRIDGE(dev)) {
2225                 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2226                 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
2227         } else {
2228                 temp &= ~FDI_LINK_TRAIN_NONE;
2229                 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
2230         }
2231         I915_WRITE(reg, temp);
2232
2233         reg = FDI_RX_CTL(pipe);
2234         temp = I915_READ(reg);
2235         if (HAS_PCH_CPT(dev)) {
2236                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2237                 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
2238         } else {
2239                 temp &= ~FDI_LINK_TRAIN_NONE;
2240                 temp |= FDI_LINK_TRAIN_NONE;
2241         }
2242         I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
2243
2244         /* wait one idle pattern time */
2245         POSTING_READ(reg);
2246         udelay(1000);
2247
2248         /* IVB wants error correction enabled */
2249         if (IS_IVYBRIDGE(dev))
2250                 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
2251                            FDI_FE_ERRC_ENABLE);
2252 }
2253
2254 static bool pipe_has_enabled_pch(struct intel_crtc *intel_crtc)
2255 {
2256         return intel_crtc->base.enabled && intel_crtc->config.has_pch_encoder;
2257 }
2258
2259 static void ivb_modeset_global_resources(struct drm_device *dev)
2260 {
2261         struct drm_i915_private *dev_priv = dev->dev_private;
2262         struct intel_crtc *pipe_B_crtc =
2263                 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
2264         struct intel_crtc *pipe_C_crtc =
2265                 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]);
2266         uint32_t temp;
2267
2268         /*
2269          * When everything is off disable fdi C so that we could enable fdi B
2270          * with all lanes. Note that we don't care about enabled pipes without
2271          * an enabled pch encoder.
2272          */
2273         if (!pipe_has_enabled_pch(pipe_B_crtc) &&
2274             !pipe_has_enabled_pch(pipe_C_crtc)) {
2275                 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
2276                 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
2277
2278                 temp = I915_READ(SOUTH_CHICKEN1);
2279                 temp &= ~FDI_BC_BIFURCATION_SELECT;
2280                 DRM_DEBUG_KMS("disabling fdi C rx\n");
2281                 I915_WRITE(SOUTH_CHICKEN1, temp);
2282         }
2283 }
2284
2285 /* The FDI link training functions for ILK/Ibexpeak. */
2286 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
2287 {
2288         struct drm_device *dev = crtc->dev;
2289         struct drm_i915_private *dev_priv = dev->dev_private;
2290         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2291         int pipe = intel_crtc->pipe;
2292         int plane = intel_crtc->plane;
2293         u32 reg, temp, tries;
2294
2295         /* FDI needs bits from pipe & plane first */
2296         assert_pipe_enabled(dev_priv, pipe);
2297         assert_plane_enabled(dev_priv, plane);
2298
2299         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2300            for train result */
2301         reg = FDI_RX_IMR(pipe);
2302         temp = I915_READ(reg);
2303         temp &= ~FDI_RX_SYMBOL_LOCK;
2304         temp &= ~FDI_RX_BIT_LOCK;
2305         I915_WRITE(reg, temp);
2306         I915_READ(reg);
2307         udelay(150);
2308
2309         /* enable CPU FDI TX and PCH FDI RX */
2310         reg = FDI_TX_CTL(pipe);
2311         temp = I915_READ(reg);
2312         temp &= ~FDI_DP_PORT_WIDTH_MASK;
2313         temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2314         temp &= ~FDI_LINK_TRAIN_NONE;
2315         temp |= FDI_LINK_TRAIN_PATTERN_1;
2316         I915_WRITE(reg, temp | FDI_TX_ENABLE);
2317
2318         reg = FDI_RX_CTL(pipe);
2319         temp = I915_READ(reg);
2320         temp &= ~FDI_LINK_TRAIN_NONE;
2321         temp |= FDI_LINK_TRAIN_PATTERN_1;
2322         I915_WRITE(reg, temp | FDI_RX_ENABLE);
2323
2324         POSTING_READ(reg);
2325         udelay(150);
2326
2327         /* Ironlake workaround, enable clock pointer after FDI enable*/
2328         I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2329         I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
2330                    FDI_RX_PHASE_SYNC_POINTER_EN);
2331
2332         reg = FDI_RX_IIR(pipe);
2333         for (tries = 0; tries < 5; tries++) {
2334                 temp = I915_READ(reg);
2335                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2336
2337                 if ((temp & FDI_RX_BIT_LOCK)) {
2338                         DRM_DEBUG_KMS("FDI train 1 done.\n");
2339                         I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2340                         break;
2341                 }
2342         }
2343         if (tries == 5)
2344                 DRM_ERROR("FDI train 1 fail!\n");
2345
2346         /* Train 2 */
2347         reg = FDI_TX_CTL(pipe);
2348         temp = I915_READ(reg);
2349         temp &= ~FDI_LINK_TRAIN_NONE;
2350         temp |= FDI_LINK_TRAIN_PATTERN_2;
2351         I915_WRITE(reg, temp);
2352
2353         reg = FDI_RX_CTL(pipe);
2354         temp = I915_READ(reg);
2355         temp &= ~FDI_LINK_TRAIN_NONE;
2356         temp |= FDI_LINK_TRAIN_PATTERN_2;
2357         I915_WRITE(reg, temp);
2358
2359         POSTING_READ(reg);
2360         udelay(150);
2361
2362         reg = FDI_RX_IIR(pipe);
2363         for (tries = 0; tries < 5; tries++) {
2364                 temp = I915_READ(reg);
2365                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2366
2367                 if (temp & FDI_RX_SYMBOL_LOCK) {
2368                         I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2369                         DRM_DEBUG_KMS("FDI train 2 done.\n");
2370                         break;
2371                 }
2372         }
2373         if (tries == 5)
2374                 DRM_ERROR("FDI train 2 fail!\n");
2375
2376         DRM_DEBUG_KMS("FDI train done\n");
2377
2378 }
2379
2380 static const int snb_b_fdi_train_param[] = {
2381         FDI_LINK_TRAIN_400MV_0DB_SNB_B,
2382         FDI_LINK_TRAIN_400MV_6DB_SNB_B,
2383         FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
2384         FDI_LINK_TRAIN_800MV_0DB_SNB_B,
2385 };
2386
2387 /* The FDI link training functions for SNB/Cougarpoint. */
2388 static void gen6_fdi_link_train(struct drm_crtc *crtc)
2389 {
2390         struct drm_device *dev = crtc->dev;
2391         struct drm_i915_private *dev_priv = dev->dev_private;
2392         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2393         int pipe = intel_crtc->pipe;
2394         u32 reg, temp, i, retry;
2395
2396         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2397            for train result */
2398         reg = FDI_RX_IMR(pipe);
2399         temp = I915_READ(reg);
2400         temp &= ~FDI_RX_SYMBOL_LOCK;
2401         temp &= ~FDI_RX_BIT_LOCK;
2402         I915_WRITE(reg, temp);
2403
2404         POSTING_READ(reg);
2405         udelay(150);
2406
2407         /* enable CPU FDI TX and PCH FDI RX */
2408         reg = FDI_TX_CTL(pipe);
2409         temp = I915_READ(reg);
2410         temp &= ~FDI_DP_PORT_WIDTH_MASK;
2411         temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2412         temp &= ~FDI_LINK_TRAIN_NONE;
2413         temp |= FDI_LINK_TRAIN_PATTERN_1;
2414         temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2415         /* SNB-B */
2416         temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2417         I915_WRITE(reg, temp | FDI_TX_ENABLE);
2418
2419         I915_WRITE(FDI_RX_MISC(pipe),
2420                    FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2421
2422         reg = FDI_RX_CTL(pipe);
2423         temp = I915_READ(reg);
2424         if (HAS_PCH_CPT(dev)) {
2425                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2426                 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2427         } else {
2428                 temp &= ~FDI_LINK_TRAIN_NONE;
2429                 temp |= FDI_LINK_TRAIN_PATTERN_1;
2430         }
2431         I915_WRITE(reg, temp | FDI_RX_ENABLE);
2432
2433         POSTING_READ(reg);
2434         udelay(150);
2435
2436         for (i = 0; i < 4; i++) {
2437                 reg = FDI_TX_CTL(pipe);
2438                 temp = I915_READ(reg);
2439                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2440                 temp |= snb_b_fdi_train_param[i];
2441                 I915_WRITE(reg, temp);
2442
2443                 POSTING_READ(reg);
2444                 udelay(500);
2445
2446                 for (retry = 0; retry < 5; retry++) {
2447                         reg = FDI_RX_IIR(pipe);
2448                         temp = I915_READ(reg);
2449                         DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2450                         if (temp & FDI_RX_BIT_LOCK) {
2451                                 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2452                                 DRM_DEBUG_KMS("FDI train 1 done.\n");
2453                                 break;
2454                         }
2455                         udelay(50);
2456                 }
2457                 if (retry < 5)
2458                         break;
2459         }
2460         if (i == 4)
2461                 DRM_ERROR("FDI train 1 fail!\n");
2462
2463         /* Train 2 */
2464         reg = FDI_TX_CTL(pipe);
2465         temp = I915_READ(reg);
2466         temp &= ~FDI_LINK_TRAIN_NONE;
2467         temp |= FDI_LINK_TRAIN_PATTERN_2;
2468         if (IS_GEN6(dev)) {
2469                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2470                 /* SNB-B */
2471                 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2472         }
2473         I915_WRITE(reg, temp);
2474
2475         reg = FDI_RX_CTL(pipe);
2476         temp = I915_READ(reg);
2477         if (HAS_PCH_CPT(dev)) {
2478                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2479                 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2480         } else {
2481                 temp &= ~FDI_LINK_TRAIN_NONE;
2482                 temp |= FDI_LINK_TRAIN_PATTERN_2;
2483         }
2484         I915_WRITE(reg, temp);
2485
2486         POSTING_READ(reg);
2487         udelay(150);
2488
2489         for (i = 0; i < 4; i++) {
2490                 reg = FDI_TX_CTL(pipe);
2491                 temp = I915_READ(reg);
2492                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2493                 temp |= snb_b_fdi_train_param[i];
2494                 I915_WRITE(reg, temp);
2495
2496                 POSTING_READ(reg);
2497                 udelay(500);
2498
2499                 for (retry = 0; retry < 5; retry++) {
2500                         reg = FDI_RX_IIR(pipe);
2501                         temp = I915_READ(reg);
2502                         DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2503                         if (temp & FDI_RX_SYMBOL_LOCK) {
2504                                 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2505                                 DRM_DEBUG_KMS("FDI train 2 done.\n");
2506                                 break;
2507                         }
2508                         udelay(50);
2509                 }
2510                 if (retry < 5)
2511                         break;
2512         }
2513         if (i == 4)
2514                 DRM_ERROR("FDI train 2 fail!\n");
2515
2516         DRM_DEBUG_KMS("FDI train done.\n");
2517 }
2518
2519 /* Manual link training for Ivy Bridge A0 parts */
2520 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
2521 {
2522         struct drm_device *dev = crtc->dev;
2523         struct drm_i915_private *dev_priv = dev->dev_private;
2524         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2525         int pipe = intel_crtc->pipe;
2526         u32 reg, temp, i;
2527
2528         /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2529            for train result */
2530         reg = FDI_RX_IMR(pipe);
2531         temp = I915_READ(reg);
2532         temp &= ~FDI_RX_SYMBOL_LOCK;
2533         temp &= ~FDI_RX_BIT_LOCK;
2534         I915_WRITE(reg, temp);
2535
2536         POSTING_READ(reg);
2537         udelay(150);
2538
2539         DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
2540                       I915_READ(FDI_RX_IIR(pipe)));
2541
2542         /* enable CPU FDI TX and PCH FDI RX */
2543         reg = FDI_TX_CTL(pipe);
2544         temp = I915_READ(reg);
2545         temp &= ~FDI_DP_PORT_WIDTH_MASK;
2546         temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2547         temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
2548         temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
2549         temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2550         temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2551         temp |= FDI_COMPOSITE_SYNC;
2552         I915_WRITE(reg, temp | FDI_TX_ENABLE);
2553
2554         I915_WRITE(FDI_RX_MISC(pipe),
2555                    FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
2556
2557         reg = FDI_RX_CTL(pipe);
2558         temp = I915_READ(reg);
2559         temp &= ~FDI_LINK_TRAIN_AUTO;
2560         temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2561         temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2562         temp |= FDI_COMPOSITE_SYNC;
2563         I915_WRITE(reg, temp | FDI_RX_ENABLE);
2564
2565         POSTING_READ(reg);
2566         udelay(150);
2567
2568         for (i = 0; i < 4; i++) {
2569                 reg = FDI_TX_CTL(pipe);
2570                 temp = I915_READ(reg);
2571                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2572                 temp |= snb_b_fdi_train_param[i];
2573                 I915_WRITE(reg, temp);
2574
2575                 POSTING_READ(reg);
2576                 udelay(500);
2577
2578                 reg = FDI_RX_IIR(pipe);
2579                 temp = I915_READ(reg);
2580                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2581
2582                 if (temp & FDI_RX_BIT_LOCK ||
2583                     (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
2584                         I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2585                         DRM_DEBUG_KMS("FDI train 1 done, level %i.\n", i);
2586                         break;
2587                 }
2588         }
2589         if (i == 4)
2590                 DRM_ERROR("FDI train 1 fail!\n");
2591
2592         /* Train 2 */
2593         reg = FDI_TX_CTL(pipe);
2594         temp = I915_READ(reg);
2595         temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2596         temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
2597         temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2598         temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2599         I915_WRITE(reg, temp);
2600
2601         reg = FDI_RX_CTL(pipe);
2602         temp = I915_READ(reg);
2603         temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2604         temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2605         I915_WRITE(reg, temp);
2606
2607         POSTING_READ(reg);
2608         udelay(150);
2609
2610         for (i = 0; i < 4; i++) {
2611                 reg = FDI_TX_CTL(pipe);
2612                 temp = I915_READ(reg);
2613                 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2614                 temp |= snb_b_fdi_train_param[i];
2615                 I915_WRITE(reg, temp);
2616
2617                 POSTING_READ(reg);
2618                 udelay(500);
2619
2620                 reg = FDI_RX_IIR(pipe);
2621                 temp = I915_READ(reg);
2622                 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2623
2624                 if (temp & FDI_RX_SYMBOL_LOCK) {
2625                         I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2626                         DRM_DEBUG_KMS("FDI train 2 done, level %i.\n", i);
2627                         break;
2628                 }
2629         }
2630         if (i == 4)
2631                 DRM_ERROR("FDI train 2 fail!\n");
2632
2633         DRM_DEBUG_KMS("FDI train done.\n");
2634 }
2635
2636 static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
2637 {
2638         struct drm_device *dev = intel_crtc->base.dev;
2639         struct drm_i915_private *dev_priv = dev->dev_private;
2640         int pipe = intel_crtc->pipe;
2641         u32 reg, temp;
2642
2643
2644         /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
2645         reg = FDI_RX_CTL(pipe);
2646         temp = I915_READ(reg);
2647         temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
2648         temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
2649         temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2650         I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
2651
2652         POSTING_READ(reg);
2653         udelay(200);
2654
2655         /* Switch from Rawclk to PCDclk */
2656         temp = I915_READ(reg);
2657         I915_WRITE(reg, temp | FDI_PCDCLK);
2658
2659         POSTING_READ(reg);
2660         udelay(200);
2661
2662         /* Enable CPU FDI TX PLL, always on for Ironlake */
2663         reg = FDI_TX_CTL(pipe);
2664         temp = I915_READ(reg);
2665         if ((temp & FDI_TX_PLL_ENABLE) == 0) {
2666                 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
2667
2668                 POSTING_READ(reg);
2669                 udelay(100);
2670         }
2671 }
2672
2673 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
2674 {
2675         struct drm_device *dev = intel_crtc->base.dev;
2676         struct drm_i915_private *dev_priv = dev->dev_private;
2677         int pipe = intel_crtc->pipe;
2678         u32 reg, temp;
2679
2680         /* Switch from PCDclk to Rawclk */
2681         reg = FDI_RX_CTL(pipe);
2682         temp = I915_READ(reg);
2683         I915_WRITE(reg, temp & ~FDI_PCDCLK);
2684
2685         /* Disable CPU FDI TX PLL */
2686         reg = FDI_TX_CTL(pipe);
2687         temp = I915_READ(reg);
2688         I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
2689
2690         POSTING_READ(reg);
2691         udelay(100);
2692
2693         reg = FDI_RX_CTL(pipe);
2694         temp = I915_READ(reg);
2695         I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
2696
2697         /* Wait for the clocks to turn off. */
2698         POSTING_READ(reg);
2699         udelay(100);
2700 }
2701
2702 static void ironlake_fdi_disable(struct drm_crtc *crtc)
2703 {
2704         struct drm_device *dev = crtc->dev;
2705         struct drm_i915_private *dev_priv = dev->dev_private;
2706         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2707         int pipe = intel_crtc->pipe;
2708         u32 reg, temp;
2709
2710         /* disable CPU FDI tx and PCH FDI rx */
2711         reg = FDI_TX_CTL(pipe);
2712         temp = I915_READ(reg);
2713         I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
2714         POSTING_READ(reg);
2715
2716         reg = FDI_RX_CTL(pipe);
2717         temp = I915_READ(reg);
2718         temp &= ~(0x7 << 16);
2719         temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2720         I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
2721
2722         POSTING_READ(reg);
2723         udelay(100);
2724
2725         /* Ironlake workaround, disable clock pointer after downing FDI */
2726         if (HAS_PCH_IBX(dev)) {
2727                 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2728         }
2729
2730         /* still set train pattern 1 */
2731         reg = FDI_TX_CTL(pipe);
2732         temp = I915_READ(reg);
2733         temp &= ~FDI_LINK_TRAIN_NONE;
2734         temp |= FDI_LINK_TRAIN_PATTERN_1;
2735         I915_WRITE(reg, temp);
2736
2737         reg = FDI_RX_CTL(pipe);
2738         temp = I915_READ(reg);
2739         if (HAS_PCH_CPT(dev)) {
2740                 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2741                 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2742         } else {
2743                 temp &= ~FDI_LINK_TRAIN_NONE;
2744                 temp |= FDI_LINK_TRAIN_PATTERN_1;
2745         }
2746         /* BPC in FDI rx is consistent with that in PIPECONF */
2747         temp &= ~(0x07 << 16);
2748         temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
2749         I915_WRITE(reg, temp);
2750
2751         POSTING_READ(reg);
2752         udelay(100);
2753 }
2754
2755 static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
2756 {
2757         struct drm_device *dev = crtc->dev;
2758         struct drm_i915_private *dev_priv = dev->dev_private;
2759         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2760         unsigned long flags;
2761         bool pending;
2762
2763         if (i915_reset_in_progress(&dev_priv->gpu_error) ||
2764             intel_crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
2765                 return false;
2766
2767         spin_lock_irqsave(&dev->event_lock, flags);
2768         pending = to_intel_crtc(crtc)->unpin_work != NULL;
2769         spin_unlock_irqrestore(&dev->event_lock, flags);
2770
2771         return pending;
2772 }
2773
2774 static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
2775 {
2776         struct drm_device *dev = crtc->dev;
2777         struct drm_i915_private *dev_priv = dev->dev_private;
2778
2779         if (crtc->fb == NULL)
2780                 return;
2781
2782         WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
2783
2784         wait_event(dev_priv->pending_flip_queue,
2785                    !intel_crtc_has_pending_flip(crtc));
2786
2787         mutex_lock(&dev->struct_mutex);
2788         intel_finish_fb(crtc->fb);
2789         mutex_unlock(&dev->struct_mutex);
2790 }
2791
2792 /* Program iCLKIP clock to the desired frequency */
2793 static void lpt_program_iclkip(struct drm_crtc *crtc)
2794 {
2795         struct drm_device *dev = crtc->dev;
2796         struct drm_i915_private *dev_priv = dev->dev_private;
2797         u32 divsel, phaseinc, auxdiv, phasedir = 0;
2798         u32 temp;
2799
2800         mutex_lock(&dev_priv->dpio_lock);
2801
2802         /* It is necessary to ungate the pixclk gate prior to programming
2803          * the divisors, and gate it back when it is done.
2804          */
2805         I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
2806
2807         /* Disable SSCCTL */
2808         intel_sbi_write(dev_priv, SBI_SSCCTL6,
2809                         intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK) |
2810                                 SBI_SSCCTL_DISABLE,
2811                         SBI_ICLK);
2812
2813         /* 20MHz is a corner case which is out of range for the 7-bit divisor */
2814         if (crtc->mode.clock == 20000) {
2815                 auxdiv = 1;
2816                 divsel = 0x41;
2817                 phaseinc = 0x20;
2818         } else {
2819                 /* The iCLK virtual clock root frequency is in MHz,
2820                  * but the crtc->mode.clock in in KHz. To get the divisors,
2821                  * it is necessary to divide one by another, so we
2822                  * convert the virtual clock precision to KHz here for higher
2823                  * precision.
2824                  */
2825                 u32 iclk_virtual_root_freq = 172800 * 1000;
2826                 u32 iclk_pi_range = 64;
2827                 u32 desired_divisor, msb_divisor_value, pi_value;
2828
2829                 desired_divisor = (iclk_virtual_root_freq / crtc->mode.clock);
2830                 msb_divisor_value = desired_divisor / iclk_pi_range;
2831                 pi_value = desired_divisor % iclk_pi_range;
2832
2833                 auxdiv = 0;
2834                 divsel = msb_divisor_value - 2;
2835                 phaseinc = pi_value;
2836         }
2837
2838         /* This should not happen with any sane values */
2839         WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
2840                 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
2841         WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
2842                 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
2843
2844         DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
2845                         crtc->mode.clock,
2846                         auxdiv,
2847                         divsel,
2848                         phasedir,
2849                         phaseinc);
2850
2851         /* Program SSCDIVINTPHASE6 */
2852         temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
2853         temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
2854         temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
2855         temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
2856         temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
2857         temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
2858         temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
2859         intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
2860
2861         /* Program SSCAUXDIV */
2862         temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
2863         temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
2864         temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
2865         intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
2866
2867         /* Enable modulator and associated divider */
2868         temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
2869         temp &= ~SBI_SSCCTL_DISABLE;
2870         intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
2871
2872         /* Wait for initialization time */
2873         udelay(24);
2874
2875         I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
2876
2877         mutex_unlock(&dev_priv->dpio_lock);
2878 }
2879
2880 static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
2881                                                 enum pipe pch_transcoder)
2882 {
2883         struct drm_device *dev = crtc->base.dev;
2884         struct drm_i915_private *dev_priv = dev->dev_private;
2885         enum transcoder cpu_transcoder = crtc->config.cpu_transcoder;
2886
2887         I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder),
2888                    I915_READ(HTOTAL(cpu_transcoder)));
2889         I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder),
2890                    I915_READ(HBLANK(cpu_transcoder)));
2891         I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder),
2892                    I915_READ(HSYNC(cpu_transcoder)));
2893
2894         I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder),
2895                    I915_READ(VTOTAL(cpu_transcoder)));
2896         I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder),
2897                    I915_READ(VBLANK(cpu_transcoder)));
2898         I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder),
2899                    I915_READ(VSYNC(cpu_transcoder)));
2900         I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder),
2901                    I915_READ(VSYNCSHIFT(cpu_transcoder)));
2902 }
2903
2904 /*
2905  * Enable PCH resources required for PCH ports:
2906  *   - PCH PLLs
2907  *   - FDI training & RX/TX
2908  *   - update transcoder timings
2909  *   - DP transcoding bits
2910  *   - transcoder
2911  */
2912 static void ironlake_pch_enable(struct drm_crtc *crtc)
2913 {
2914         struct drm_device *dev = crtc->dev;
2915         struct drm_i915_private *dev_priv = dev->dev_private;
2916         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2917         int pipe = intel_crtc->pipe;
2918         u32 reg, temp;
2919
2920         assert_pch_transcoder_disabled(dev_priv, pipe);
2921
2922         /* Write the TU size bits before fdi link training, so that error
2923          * detection works. */
2924         I915_WRITE(FDI_RX_TUSIZE1(pipe),
2925                    I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
2926
2927         /* For PCH output, training FDI link */
2928         dev_priv->display.fdi_link_train(crtc);
2929
2930         /* XXX: pch pll's can be enabled any time before we enable the PCH
2931          * transcoder, and we actually should do this to not upset any PCH
2932          * transcoder that already use the clock when we share it.
2933          *
2934          * Note that enable_shared_dpll tries to do the right thing, but
2935          * get_shared_dpll unconditionally resets the pll - we need that to have
2936          * the right LVDS enable sequence. */
2937         ironlake_enable_shared_dpll(intel_crtc);
2938
2939         if (HAS_PCH_CPT(dev)) {
2940                 u32 sel;
2941
2942                 temp = I915_READ(PCH_DPLL_SEL);
2943                 temp |= TRANS_DPLL_ENABLE(pipe);
2944                 sel = TRANS_DPLLB_SEL(pipe);
2945                 if (intel_crtc->config.shared_dpll == DPLL_ID_PCH_PLL_B)
2946                         temp |= sel;
2947                 else
2948                         temp &= ~sel;
2949                 I915_WRITE(PCH_DPLL_SEL, temp);
2950         }
2951
2952         /* set transcoder timing, panel must allow it */
2953         assert_panel_unlocked(dev_priv, pipe);
2954         ironlake_pch_transcoder_set_timings(intel_crtc, pipe);
2955
2956         intel_fdi_normal_train(crtc);
2957
2958         /* For PCH DP, enable TRANS_DP_CTL */
2959         if (HAS_PCH_CPT(dev) &&
2960             (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
2961              intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
2962                 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
2963                 reg = TRANS_DP_CTL(pipe);
2964                 temp = I915_READ(reg);
2965                 temp &= ~(TRANS_DP_PORT_SEL_MASK |
2966                           TRANS_DP_SYNC_MASK |
2967                           TRANS_DP_BPC_MASK);
2968                 temp |= (TRANS_DP_OUTPUT_ENABLE |
2969                          TRANS_DP_ENH_FRAMING);
2970                 temp |= bpc << 9; /* same format but at 11:9 */
2971
2972                 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
2973                         temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
2974                 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
2975                         temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
2976
2977                 switch (intel_trans_dp_port_sel(crtc)) {
2978                 case PCH_DP_B:
2979                         temp |= TRANS_DP_PORT_SEL_B;
2980                         break;
2981                 case PCH_DP_C:
2982                         temp |= TRANS_DP_PORT_SEL_C;
2983                         break;
2984                 case PCH_DP_D:
2985                         temp |= TRANS_DP_PORT_SEL_D;
2986                         break;
2987                 default:
2988                         BUG();
2989                 }
2990
2991                 I915_WRITE(reg, temp);
2992         }
2993
2994         ironlake_enable_pch_transcoder(dev_priv, pipe);
2995 }
2996
2997 static void lpt_pch_enable(struct drm_crtc *crtc)
2998 {
2999         struct drm_device *dev = crtc->dev;
3000         struct drm_i915_private *dev_priv = dev->dev_private;
3001         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3002         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
3003
3004         assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A);
3005
3006         lpt_program_iclkip(crtc);
3007
3008         /* Set transcoder timing. */
3009         ironlake_pch_transcoder_set_timings(intel_crtc, PIPE_A);
3010
3011         lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
3012 }
3013
3014 static void intel_put_shared_dpll(struct intel_crtc *crtc)
3015 {
3016         struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
3017
3018         if (pll == NULL)
3019                 return;
3020
3021         if (pll->refcount == 0) {
3022                 WARN(1, "bad %s refcount\n", pll->name);
3023                 return;
3024         }
3025
3026         if (--pll->refcount == 0) {
3027                 WARN_ON(pll->on);
3028                 WARN_ON(pll->active);
3029         }
3030
3031         crtc->config.shared_dpll = DPLL_ID_PRIVATE;
3032 }
3033
3034 static struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc, u32 dpll, u32 fp)
3035 {
3036         struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
3037         struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc);
3038         enum intel_dpll_id i;
3039
3040         if (pll) {
3041                 DRM_DEBUG_KMS("CRTC:%d dropping existing %s\n",
3042                               crtc->base.base.id, pll->name);
3043                 intel_put_shared_dpll(crtc);
3044         }
3045
3046         if (HAS_PCH_IBX(dev_priv->dev)) {
3047                 /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
3048                 i = crtc->pipe;
3049                 pll = &dev_priv->shared_dplls[i];
3050
3051                 DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n",
3052                               crtc->base.base.id, pll->name);
3053
3054                 goto found;
3055         }
3056
3057         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
3058                 pll = &dev_priv->shared_dplls[i];
3059
3060                 /* Only want to check enabled timings first */
3061                 if (pll->refcount == 0)
3062                         continue;
3063
3064                 if (dpll == (I915_READ(PCH_DPLL(pll->id)) & 0x7fffffff) &&
3065                     fp == I915_READ(PCH_FP0(pll->id))) {
3066                         DRM_DEBUG_KMS("CRTC:%d sharing existing %s (refcount %d, ative %d)\n",
3067                                       crtc->base.base.id,
3068                                       pll->name, pll->refcount, pll->active);
3069
3070                         goto found;
3071                 }
3072         }
3073
3074         /* Ok no matching timings, maybe there's a free one? */
3075         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
3076                 pll = &dev_priv->shared_dplls[i];
3077                 if (pll->refcount == 0) {
3078                         DRM_DEBUG_KMS("CRTC:%d allocated %s\n",
3079                                       crtc->base.base.id, pll->name);
3080                         goto found;
3081                 }
3082         }
3083
3084         return NULL;
3085
3086 found:
3087         crtc->config.shared_dpll = i;
3088         DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name,
3089                          pipe_name(crtc->pipe));
3090
3091         if (pll->active == 0) {
3092                 memcpy(&pll->hw_state, &crtc->config.dpll_hw_state,
3093                        sizeof(pll->hw_state));
3094
3095                 DRM_DEBUG_DRIVER("setting up %s\n", pll->name);
3096                 WARN_ON(pll->on);
3097                 assert_shared_dpll_disabled(dev_priv, pll);
3098
3099                 /* Wait for the clocks to stabilize before rewriting the regs */
3100                 I915_WRITE(PCH_DPLL(pll->id), dpll & ~DPLL_VCO_ENABLE);
3101                 POSTING_READ(PCH_DPLL(pll->id));
3102                 udelay(150);
3103
3104                 I915_WRITE(PCH_FP0(pll->id), fp);
3105                 I915_WRITE(PCH_DPLL(pll->id), dpll & ~DPLL_VCO_ENABLE);
3106         }
3107         pll->refcount++;
3108
3109         return pll;
3110 }
3111
3112 static void cpt_verify_modeset(struct drm_device *dev, int pipe)
3113 {
3114         struct drm_i915_private *dev_priv = dev->dev_private;
3115         int dslreg = PIPEDSL(pipe);
3116         u32 temp;
3117
3118         temp = I915_READ(dslreg);
3119         udelay(500);
3120         if (wait_for(I915_READ(dslreg) != temp, 5)) {
3121                 if (wait_for(I915_READ(dslreg) != temp, 5))
3122                         DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
3123         }
3124 }
3125
3126 static void ironlake_pfit_enable(struct intel_crtc *crtc)
3127 {
3128         struct drm_device *dev = crtc->base.dev;
3129         struct drm_i915_private *dev_priv = dev->dev_private;
3130         int pipe = crtc->pipe;
3131
3132         if (crtc->config.pch_pfit.size) {
3133                 /* Force use of hard-coded filter coefficients
3134                  * as some pre-programmed values are broken,
3135                  * e.g. x201.
3136                  */
3137                 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
3138                         I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
3139                                                  PF_PIPE_SEL_IVB(pipe));
3140                 else
3141                         I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
3142                 I915_WRITE(PF_WIN_POS(pipe), crtc->config.pch_pfit.pos);
3143                 I915_WRITE(PF_WIN_SZ(pipe), crtc->config.pch_pfit.size);
3144         }
3145 }
3146
3147 static void intel_enable_planes(struct drm_crtc *crtc)
3148 {
3149         struct drm_device *dev = crtc->dev;
3150         enum pipe pipe = to_intel_crtc(crtc)->pipe;
3151         struct intel_plane *intel_plane;
3152
3153         list_for_each_entry(intel_plane, &dev->mode_config.plane_list, base.head)
3154                 if (intel_plane->pipe == pipe)
3155                         intel_plane_restore(&intel_plane->base);
3156 }
3157
3158 static void intel_disable_planes(struct drm_crtc *crtc)
3159 {
3160         struct drm_device *dev = crtc->dev;
3161         enum pipe pipe = to_intel_crtc(crtc)->pipe;
3162         struct intel_plane *intel_plane;
3163
3164         list_for_each_entry(intel_plane, &dev->mode_config.plane_list, base.head)
3165                 if (intel_plane->pipe == pipe)
3166                         intel_plane_disable(&intel_plane->base);
3167 }
3168
3169 static void ironlake_crtc_enable(struct drm_crtc *crtc)
3170 {
3171         struct drm_device *dev = crtc->dev;
3172         struct drm_i915_private *dev_priv = dev->dev_private;
3173         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3174         struct intel_encoder *encoder;
3175         int pipe = intel_crtc->pipe;
3176         int plane = intel_crtc->plane;
3177         u32 temp;
3178
3179         WARN_ON(!crtc->enabled);
3180
3181         if (intel_crtc->active)
3182                 return;
3183
3184         intel_crtc->active = true;
3185
3186         intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
3187         intel_set_pch_fifo_underrun_reporting(dev, pipe, true);
3188
3189         intel_update_watermarks(dev);
3190
3191         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
3192                 temp = I915_READ(PCH_LVDS);
3193                 if ((temp & LVDS_PORT_EN) == 0)
3194                         I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
3195         }
3196
3197
3198         if (intel_crtc->config.has_pch_encoder) {
3199                 /* Note: FDI PLL enabling _must_ be done before we enable the
3200                  * cpu pipes, hence this is separate from all the other fdi/pch
3201                  * enabling. */
3202                 ironlake_fdi_pll_enable(intel_crtc);
3203         } else {
3204                 assert_fdi_tx_disabled(dev_priv, pipe);
3205                 assert_fdi_rx_disabled(dev_priv, pipe);
3206         }
3207
3208         for_each_encoder_on_crtc(dev, crtc, encoder)
3209                 if (encoder->pre_enable)
3210                         encoder->pre_enable(encoder);
3211
3212         ironlake_pfit_enable(intel_crtc);
3213
3214         /*
3215          * On ILK+ LUT must be loaded before the pipe is running but with
3216          * clocks enabled
3217          */
3218         intel_crtc_load_lut(crtc);
3219
3220         intel_enable_pipe(dev_priv, pipe,
3221                           intel_crtc->config.has_pch_encoder);
3222         intel_enable_plane(dev_priv, plane, pipe);
3223         intel_enable_planes(crtc);
3224         intel_crtc_update_cursor(crtc, true);
3225
3226         if (intel_crtc->config.has_pch_encoder)
3227                 ironlake_pch_enable(crtc);
3228
3229         mutex_lock(&dev->struct_mutex);
3230         intel_update_fbc(dev);
3231         mutex_unlock(&dev->struct_mutex);
3232
3233         for_each_encoder_on_crtc(dev, crtc, encoder)
3234                 encoder->enable(encoder);
3235
3236         if (HAS_PCH_CPT(dev))
3237                 cpt_verify_modeset(dev, intel_crtc->pipe);
3238
3239         /*
3240          * There seems to be a race in PCH platform hw (at least on some
3241          * outputs) where an enabled pipe still completes any pageflip right
3242          * away (as if the pipe is off) instead of waiting for vblank. As soon
3243          * as the first vblank happend, everything works as expected. Hence just
3244          * wait for one vblank before returning to avoid strange things
3245          * happening.
3246          */
3247         intel_wait_for_vblank(dev, intel_crtc->pipe);
3248 }
3249
3250 /* IPS only exists on ULT machines and is tied to pipe A. */
3251 static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
3252 {
3253         return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
3254 }
3255
3256 static void hsw_enable_ips(struct intel_crtc *crtc)
3257 {
3258         struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
3259
3260         if (!crtc->config.ips_enabled)
3261                 return;
3262
3263         /* We can only enable IPS after we enable a plane and wait for a vblank.
3264          * We guarantee that the plane is enabled by calling intel_enable_ips
3265          * only after intel_enable_plane. And intel_enable_plane already waits
3266          * for a vblank, so all we need to do here is to enable the IPS bit. */
3267         assert_plane_enabled(dev_priv, crtc->plane);
3268         I915_WRITE(IPS_CTL, IPS_ENABLE);
3269 }
3270
3271 static void hsw_disable_ips(struct intel_crtc *crtc)
3272 {
3273         struct drm_device *dev = crtc->base.dev;
3274         struct drm_i915_private *dev_priv = dev->dev_private;
3275
3276         if (!crtc->config.ips_enabled)
3277                 return;
3278
3279         assert_plane_enabled(dev_priv, crtc->plane);
3280         I915_WRITE(IPS_CTL, 0);
3281
3282         /* We need to wait for a vblank before we can disable the plane. */
3283         intel_wait_for_vblank(dev, crtc->pipe);
3284 }
3285
3286 static void haswell_crtc_enable(struct drm_crtc *crtc)
3287 {
3288         struct drm_device *dev = crtc->dev;
3289         struct drm_i915_private *dev_priv = dev->dev_private;
3290         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3291         struct intel_encoder *encoder;
3292         int pipe = intel_crtc->pipe;
3293         int plane = intel_crtc->plane;
3294
3295         WARN_ON(!crtc->enabled);
3296
3297         if (intel_crtc->active)
3298                 return;
3299
3300         intel_crtc->active = true;
3301
3302         intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
3303         if (intel_crtc->config.has_pch_encoder)
3304                 intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true);
3305
3306         intel_update_watermarks(dev);
3307
3308         if (intel_crtc->config.has_pch_encoder)
3309                 dev_priv->display.fdi_link_train(crtc);
3310
3311         for_each_encoder_on_crtc(dev, crtc, encoder)
3312                 if (encoder->pre_enable)
3313                         encoder->pre_enable(encoder);
3314
3315         intel_ddi_enable_pipe_clock(intel_crtc);
3316
3317         ironlake_pfit_enable(intel_crtc);
3318
3319         /*
3320          * On ILK+ LUT must be loaded before the pipe is running but with
3321          * clocks enabled
3322          */
3323         intel_crtc_load_lut(crtc);
3324
3325         intel_ddi_set_pipe_settings(crtc);
3326         intel_ddi_enable_transcoder_func(crtc);
3327
3328         intel_enable_pipe(dev_priv, pipe,
3329                           intel_crtc->config.has_pch_encoder);
3330         intel_enable_plane(dev_priv, plane, pipe);
3331         intel_enable_planes(crtc);
3332         intel_crtc_update_cursor(crtc, true);
3333
3334         hsw_enable_ips(intel_crtc);
3335
3336         if (intel_crtc->config.has_pch_encoder)
3337                 lpt_pch_enable(crtc);
3338
3339         mutex_lock(&dev->struct_mutex);
3340         intel_update_fbc(dev);
3341         mutex_unlock(&dev->struct_mutex);
3342
3343         for_each_encoder_on_crtc(dev, crtc, encoder)
3344                 encoder->enable(encoder);
3345
3346         /*
3347          * There seems to be a race in PCH platform hw (at least on some
3348          * outputs) where an enabled pipe still completes any pageflip right
3349          * away (as if the pipe is off) instead of waiting for vblank. As soon
3350          * as the first vblank happend, everything works as expected. Hence just
3351          * wait for one vblank before returning to avoid strange things
3352          * happening.
3353          */
3354         intel_wait_for_vblank(dev, intel_crtc->pipe);
3355 }
3356
3357 static void ironlake_pfit_disable(struct intel_crtc *crtc)
3358 {
3359         struct drm_device *dev = crtc->base.dev;
3360         struct drm_i915_private *dev_priv = dev->dev_private;
3361         int pipe = crtc->pipe;
3362
3363         /* To avoid upsetting the power well on haswell only disable the pfit if
3364          * it's in use. The hw state code will make sure we get this right. */
3365         if (crtc->config.pch_pfit.size) {
3366                 I915_WRITE(PF_CTL(pipe), 0);
3367                 I915_WRITE(PF_WIN_POS(pipe), 0);
3368                 I915_WRITE(PF_WIN_SZ(pipe), 0);
3369         }
3370 }
3371
3372 static void ironlake_crtc_disable(struct drm_crtc *crtc)
3373 {
3374         struct drm_device *dev = crtc->dev;
3375         struct drm_i915_private *dev_priv = dev->dev_private;
3376         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3377         struct intel_encoder *encoder;
3378         int pipe = intel_crtc->pipe;
3379         int plane = intel_crtc->plane;
3380         u32 reg, temp;
3381
3382
3383         if (!intel_crtc->active)
3384                 return;
3385
3386         for_each_encoder_on_crtc(dev, crtc, encoder)
3387                 encoder->disable(encoder);
3388
3389         intel_crtc_wait_for_pending_flips(crtc);
3390         drm_vblank_off(dev, pipe);
3391
3392         if (dev_priv->cfb_plane == plane)
3393                 intel_disable_fbc(dev);
3394
3395         intel_crtc_update_cursor(crtc, false);
3396         intel_disable_planes(crtc);
3397         intel_disable_plane(dev_priv, plane, pipe);
3398
3399         if (intel_crtc->config.has_pch_encoder)
3400                 intel_set_pch_fifo_underrun_reporting(dev, pipe, false);
3401
3402         intel_disable_pipe(dev_priv, pipe);
3403
3404         ironlake_pfit_disable(intel_crtc);
3405
3406         for_each_encoder_on_crtc(dev, crtc, encoder)
3407                 if (encoder->post_disable)
3408                         encoder->post_disable(encoder);
3409
3410         if (intel_crtc->config.has_pch_encoder) {
3411                 ironlake_fdi_disable(crtc);
3412
3413                 ironlake_disable_pch_transcoder(dev_priv, pipe);
3414                 intel_set_pch_fifo_underrun_reporting(dev, pipe, true);
3415
3416                 if (HAS_PCH_CPT(dev)) {
3417                         /* disable TRANS_DP_CTL */
3418                         reg = TRANS_DP_CTL(pipe);
3419                         temp = I915_READ(reg);
3420                         temp &= ~(TRANS_DP_OUTPUT_ENABLE |
3421                                   TRANS_DP_PORT_SEL_MASK);
3422                         temp |= TRANS_DP_PORT_SEL_NONE;
3423                         I915_WRITE(reg, temp);
3424
3425                         /* disable DPLL_SEL */
3426                         temp = I915_READ(PCH_DPLL_SEL);
3427                         temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe));
3428                         I915_WRITE(PCH_DPLL_SEL, temp);
3429                 }
3430
3431                 /* disable PCH DPLL */
3432                 intel_disable_shared_dpll(intel_crtc);
3433
3434                 ironlake_fdi_pll_disable(intel_crtc);
3435         }
3436
3437         intel_crtc->active = false;
3438         intel_update_watermarks(dev);
3439
3440         mutex_lock(&dev->struct_mutex);
3441         intel_update_fbc(dev);
3442         mutex_unlock(&dev->struct_mutex);
3443 }
3444
3445 static void haswell_crtc_disable(struct drm_crtc *crtc)
3446 {
3447         struct drm_device *dev = crtc->dev;
3448         struct drm_i915_private *dev_priv = dev->dev_private;
3449         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3450         struct intel_encoder *encoder;
3451         int pipe = intel_crtc->pipe;
3452         int plane = intel_crtc->plane;
3453         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
3454
3455         if (!intel_crtc->active)
3456                 return;
3457
3458         for_each_encoder_on_crtc(dev, crtc, encoder)
3459                 encoder->disable(encoder);
3460
3461         intel_crtc_wait_for_pending_flips(crtc);
3462         drm_vblank_off(dev, pipe);
3463
3464         /* FBC must be disabled before disabling the plane on HSW. */
3465         if (dev_priv->cfb_plane == plane)
3466                 intel_disable_fbc(dev);
3467
3468         hsw_disable_ips(intel_crtc);
3469
3470         intel_crtc_update_cursor(crtc, false);
3471         intel_disable_planes(crtc);
3472         intel_disable_plane(dev_priv, plane, pipe);
3473
3474         if (intel_crtc->config.has_pch_encoder)
3475                 intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, false);
3476         intel_disable_pipe(dev_priv, pipe);
3477
3478         intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
3479
3480         ironlake_pfit_disable(intel_crtc);
3481
3482         intel_ddi_disable_pipe_clock(intel_crtc);
3483
3484         for_each_encoder_on_crtc(dev, crtc, encoder)
3485                 if (encoder->post_disable)
3486                         encoder->post_disable(encoder);
3487
3488         if (intel_crtc->config.has_pch_encoder) {
3489                 lpt_disable_pch_transcoder(dev_priv);
3490                 intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true);
3491                 intel_ddi_fdi_disable(crtc);
3492         }
3493
3494         intel_crtc->active = false;
3495         intel_update_watermarks(dev);
3496
3497         mutex_lock(&dev->struct_mutex);
3498         intel_update_fbc(dev);
3499         mutex_unlock(&dev->struct_mutex);
3500 }
3501
3502 static void ironlake_crtc_off(struct drm_crtc *crtc)
3503 {
3504         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3505         intel_put_shared_dpll(intel_crtc);
3506 }
3507
3508 static void haswell_crtc_off(struct drm_crtc *crtc)
3509 {
3510         intel_ddi_put_crtc_pll(crtc);
3511 }
3512
3513 static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
3514 {
3515         if (!enable && intel_crtc->overlay) {
3516                 struct drm_device *dev = intel_crtc->base.dev;
3517                 struct drm_i915_private *dev_priv = dev->dev_private;
3518
3519                 mutex_lock(&dev->struct_mutex);
3520                 dev_priv->mm.interruptible = false;
3521                 (void) intel_overlay_switch_off(intel_crtc->overlay);
3522                 dev_priv->mm.interruptible = true;
3523                 mutex_unlock(&dev->struct_mutex);
3524         }
3525
3526         /* Let userspace switch the overlay on again. In most cases userspace
3527          * has to recompute where to put it anyway.
3528          */
3529 }
3530
3531 /**
3532  * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
3533  * cursor plane briefly if not already running after enabling the display
3534  * plane.
3535  * This workaround avoids occasional blank screens when self refresh is
3536  * enabled.
3537  */
3538 static void
3539 g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
3540 {
3541         u32 cntl = I915_READ(CURCNTR(pipe));
3542
3543         if ((cntl & CURSOR_MODE) == 0) {
3544                 u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
3545
3546                 I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
3547                 I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
3548                 intel_wait_for_vblank(dev_priv->dev, pipe);
3549                 I915_WRITE(CURCNTR(pipe), cntl);
3550                 I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
3551                 I915_WRITE(FW_BLC_SELF, fw_bcl_self);
3552         }
3553 }
3554
3555 static void i9xx_pfit_enable(struct intel_crtc *crtc)
3556 {
3557         struct drm_device *dev = crtc->base.dev;
3558         struct drm_i915_private *dev_priv = dev->dev_private;
3559         struct intel_crtc_config *pipe_config = &crtc->config;
3560
3561         if (!crtc->config.gmch_pfit.control)
3562                 return;
3563
3564         /*
3565          * The panel fitter should only be adjusted whilst the pipe is disabled,
3566          * according to register description and PRM.
3567          */
3568         WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
3569         assert_pipe_disabled(dev_priv, crtc->pipe);
3570
3571         I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios);
3572         I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control);
3573
3574         /* Border color in case we don't scale up to the full screen. Black by
3575          * default, change to something else for debugging. */
3576         I915_WRITE(BCLRPAT(crtc->pipe), 0);
3577 }
3578
3579 static void valleyview_crtc_enable(struct drm_crtc *crtc)
3580 {
3581         struct drm_device *dev = crtc->dev;
3582         struct drm_i915_private *dev_priv = dev->dev_private;
3583         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3584         struct intel_encoder *encoder;
3585         int pipe = intel_crtc->pipe;
3586         int plane = intel_crtc->plane;
3587
3588         WARN_ON(!crtc->enabled);
3589
3590         if (intel_crtc->active)
3591                 return;
3592
3593         intel_crtc->active = true;
3594         intel_update_watermarks(dev);
3595
3596         mutex_lock(&dev_priv->dpio_lock);
3597
3598         for_each_encoder_on_crtc(dev, crtc, encoder)
3599                 if (encoder->pre_pll_enable)
3600                         encoder->pre_pll_enable(encoder);
3601
3602         intel_enable_pll(dev_priv, pipe);
3603
3604         for_each_encoder_on_crtc(dev, crtc, encoder)
3605                 if (encoder->pre_enable)
3606                         encoder->pre_enable(encoder);
3607
3608         /* VLV wants encoder enabling _before_ the pipe is up. */
3609         for_each_encoder_on_crtc(dev, crtc, encoder)
3610                 encoder->enable(encoder);
3611
3612         i9xx_pfit_enable(intel_crtc);
3613
3614         intel_crtc_load_lut(crtc);
3615
3616         intel_enable_pipe(dev_priv, pipe, false);
3617         intel_enable_plane(dev_priv, plane, pipe);
3618         intel_enable_planes(crtc);
3619         intel_crtc_update_cursor(crtc, true);
3620
3621         intel_update_fbc(dev);
3622
3623         mutex_unlock(&dev_priv->dpio_lock);
3624 }
3625
3626 static void i9xx_crtc_enable(struct drm_crtc *crtc)
3627 {
3628         struct drm_device *dev = crtc->dev;
3629         struct drm_i915_private *dev_priv = dev->dev_private;
3630         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3631         struct intel_encoder *encoder;
3632         int pipe = intel_crtc->pipe;
3633         int plane = intel_crtc->plane;
3634
3635         WARN_ON(!crtc->enabled);
3636
3637         if (intel_crtc->active)
3638                 return;
3639
3640         intel_crtc->active = true;
3641         intel_update_watermarks(dev);
3642
3643         intel_enable_pll(dev_priv, pipe);
3644
3645         for_each_encoder_on_crtc(dev, crtc, encoder)
3646                 if (encoder->pre_enable)
3647                         encoder->pre_enable(encoder);
3648
3649         i9xx_pfit_enable(intel_crtc);
3650
3651         intel_crtc_load_lut(crtc);
3652
3653         intel_enable_pipe(dev_priv, pipe, false);
3654         intel_enable_plane(dev_priv, plane, pipe);
3655         intel_enable_planes(crtc);
3656         /* The fixup needs to happen before cursor is enabled */
3657         if (IS_G4X(dev))
3658                 g4x_fixup_plane(dev_priv, pipe);
3659         intel_crtc_update_cursor(crtc, true);
3660
3661         /* Give the overlay scaler a chance to enable if it's on this pipe */
3662         intel_crtc_dpms_overlay(intel_crtc, true);
3663
3664         intel_update_fbc(dev);
3665
3666         for_each_encoder_on_crtc(dev, crtc, encoder)
3667                 encoder->enable(encoder);
3668 }
3669
3670 static void i9xx_pfit_disable(struct intel_crtc *crtc)
3671 {
3672         struct drm_device *dev = crtc->base.dev;
3673         struct drm_i915_private *dev_priv = dev->dev_private;
3674
3675         if (!crtc->config.gmch_pfit.control)
3676                 return;
3677
3678         assert_pipe_disabled(dev_priv, crtc->pipe);
3679
3680         DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n",
3681                          I915_READ(PFIT_CONTROL));
3682         I915_WRITE(PFIT_CONTROL, 0);
3683 }
3684
3685 static void i9xx_crtc_disable(struct drm_crtc *crtc)
3686 {
3687         struct drm_device *dev = crtc->dev;
3688         struct drm_i915_private *dev_priv = dev->dev_private;
3689         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3690         struct intel_encoder *encoder;
3691         int pipe = intel_crtc->pipe;
3692         int plane = intel_crtc->plane;
3693
3694         if (!intel_crtc->active)
3695                 return;
3696
3697         for_each_encoder_on_crtc(dev, crtc, encoder)
3698                 encoder->disable(encoder);
3699
3700         /* Give the overlay scaler a chance to disable if it's on this pipe */
3701         intel_crtc_wait_for_pending_flips(crtc);
3702         drm_vblank_off(dev, pipe);
3703
3704         if (dev_priv->cfb_plane == plane)
3705                 intel_disable_fbc(dev);
3706
3707         intel_crtc_dpms_overlay(intel_crtc, false);
3708         intel_crtc_update_cursor(crtc, false);
3709         intel_disable_planes(crtc);
3710         intel_disable_plane(dev_priv, plane, pipe);
3711
3712         intel_disable_pipe(dev_priv, pipe);
3713
3714         i9xx_pfit_disable(intel_crtc);
3715
3716         for_each_encoder_on_crtc(dev, crtc, encoder)
3717                 if (encoder->post_disable)
3718                         encoder->post_disable(encoder);
3719
3720         intel_disable_pll(dev_priv, pipe);
3721
3722         intel_crtc->active = false;
3723         intel_update_fbc(dev);
3724         intel_update_watermarks(dev);
3725 }
3726
3727 static void i9xx_crtc_off(struct drm_crtc *crtc)
3728 {
3729 }
3730
3731 static void intel_crtc_update_sarea(struct drm_crtc *crtc,
3732                                     bool enabled)
3733 {
3734         struct drm_device *dev = crtc->dev;
3735         struct drm_i915_master_private *master_priv;
3736         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3737         int pipe = intel_crtc->pipe;
3738
3739         if (!dev->primary->master)
3740                 return;
3741
3742         master_priv = dev->primary->master->driver_priv;
3743         if (!master_priv->sarea_priv)
3744                 return;
3745
3746         switch (pipe) {
3747         case 0:
3748                 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
3749                 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
3750                 break;
3751         case 1:
3752                 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
3753                 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
3754                 break;
3755         default:
3756                 DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
3757                 break;
3758         }
3759 }
3760
3761 /**
3762  * Sets the power management mode of the pipe and plane.
3763  */
3764 void intel_crtc_update_dpms(struct drm_crtc *crtc)
3765 {
3766         struct drm_device *dev = crtc->dev;
3767         struct drm_i915_private *dev_priv = dev->dev_private;
3768         struct intel_encoder *intel_encoder;
3769         bool enable = false;
3770
3771         for_each_encoder_on_crtc(dev, crtc, intel_encoder)
3772                 enable |= intel_encoder->connectors_active;
3773
3774         if (enable)
3775                 dev_priv->display.crtc_enable(crtc);
3776         else
3777                 dev_priv->display.crtc_disable(crtc);
3778
3779         intel_crtc_update_sarea(crtc, enable);
3780 }
3781
3782 static void intel_crtc_disable(struct drm_crtc *crtc)
3783 {
3784         struct drm_device *dev = crtc->dev;
3785         struct drm_connector *connector;
3786         struct drm_i915_private *dev_priv = dev->dev_private;
3787         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3788
3789         /* crtc should still be enabled when we disable it. */
3790         WARN_ON(!crtc->enabled);
3791
3792         dev_priv->display.crtc_disable(crtc);
3793         intel_crtc->eld_vld = false;
3794         intel_crtc_update_sarea(crtc, false);
3795         dev_priv->display.off(crtc);
3796
3797         assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
3798         assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
3799
3800         if (crtc->fb) {
3801                 mutex_lock(&dev->struct_mutex);
3802                 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
3803                 mutex_unlock(&dev->struct_mutex);
3804                 crtc->fb = NULL;
3805         }
3806
3807         /* Update computed state. */
3808         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
3809                 if (!connector->encoder || !connector->encoder->crtc)
3810                         continue;
3811
3812                 if (connector->encoder->crtc != crtc)
3813                         continue;
3814
3815                 connector->dpms = DRM_MODE_DPMS_OFF;
3816                 to_intel_encoder(connector->encoder)->connectors_active = false;
3817         }
3818 }
3819
3820 void intel_modeset_disable(struct drm_device *dev)
3821 {
3822         struct drm_crtc *crtc;
3823
3824         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
3825                 if (crtc->enabled)
3826                         intel_crtc_disable(crtc);
3827         }
3828 }
3829
3830 void intel_encoder_destroy(struct drm_encoder *encoder)
3831 {
3832         struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
3833
3834         drm_encoder_cleanup(encoder);
3835         kfree(intel_encoder);
3836 }
3837
3838 /* Simple dpms helper for encodres with just one connector, no cloning and only
3839  * one kind of off state. It clamps all !ON modes to fully OFF and changes the
3840  * state of the entire output pipe. */
3841 void intel_encoder_dpms(struct intel_encoder *encoder, int mode)
3842 {
3843         if (mode == DRM_MODE_DPMS_ON) {
3844                 encoder->connectors_active = true;
3845
3846                 intel_crtc_update_dpms(encoder->base.crtc);
3847         } else {
3848                 encoder->connectors_active = false;
3849
3850                 intel_crtc_update_dpms(encoder->base.crtc);
3851         }
3852 }
3853
3854 /* Cross check the actual hw state with our own modeset state tracking (and it's
3855  * internal consistency). */
3856 static void intel_connector_check_state(struct intel_connector *connector)
3857 {
3858         if (connector->get_hw_state(connector)) {
3859                 struct intel_encoder *encoder = connector->encoder;
3860                 struct drm_crtc *crtc;
3861                 bool encoder_enabled;
3862                 enum pipe pipe;
3863
3864                 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
3865                               connector->base.base.id,
3866                               drm_get_connector_name(&connector->base));
3867
3868                 WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
3869                      "wrong connector dpms state\n");
3870                 WARN(connector->base.encoder != &encoder->base,
3871                      "active connector not linked to encoder\n");
3872                 WARN(!encoder->connectors_active,
3873                      "encoder->connectors_active not set\n");
3874
3875                 encoder_enabled = encoder->get_hw_state(encoder, &pipe);
3876                 WARN(!encoder_enabled, "encoder not enabled\n");
3877                 if (WARN_ON(!encoder->base.crtc))
3878                         return;
3879
3880                 crtc = encoder->base.crtc;
3881
3882                 WARN(!crtc->enabled, "crtc not enabled\n");
3883                 WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
3884                 WARN(pipe != to_intel_crtc(crtc)->pipe,
3885                      "encoder active on the wrong pipe\n");
3886         }
3887 }
3888
3889 /* Even simpler default implementation, if there's really no special case to
3890  * consider. */
3891 void intel_connector_dpms(struct drm_connector *connector, int mode)
3892 {
3893         struct intel_encoder *encoder = intel_attached_encoder(connector);
3894
3895         /* All the simple cases only support two dpms states. */
3896         if (mode != DRM_MODE_DPMS_ON)
3897                 mode = DRM_MODE_DPMS_OFF;
3898
3899         if (mode == connector->dpms)
3900                 return;
3901
3902         connector->dpms = mode;
3903
3904         /* Only need to change hw state when actually enabled */
3905         if (encoder->base.crtc)
3906                 intel_encoder_dpms(encoder, mode);
3907         else
3908                 WARN_ON(encoder->connectors_active != false);
3909
3910         intel_modeset_check_state(connector->dev);
3911 }
3912
3913 /* Simple connector->get_hw_state implementation for encoders that support only
3914  * one connector and no cloning and hence the encoder state determines the state
3915  * of the connector. */
3916 bool intel_connector_get_hw_state(struct intel_connector *connector)
3917 {
3918         enum pipe pipe = 0;
3919         struct intel_encoder *encoder = connector->encoder;
3920
3921         return encoder->get_hw_state(encoder, &pipe);
3922 }
3923
3924 static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
3925                                      struct intel_crtc_config *pipe_config)
3926 {
3927         struct drm_i915_private *dev_priv = dev->dev_private;
3928         struct intel_crtc *pipe_B_crtc =
3929                 to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
3930
3931         DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
3932                       pipe_name(pipe), pipe_config->fdi_lanes);
3933         if (pipe_config->fdi_lanes > 4) {
3934                 DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
3935                               pipe_name(pipe), pipe_config->fdi_lanes);
3936                 return false;
3937         }
3938
3939         if (IS_HASWELL(dev)) {
3940                 if (pipe_config->fdi_lanes > 2) {
3941                         DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
3942                                       pipe_config->fdi_lanes);
3943                         return false;
3944                 } else {
3945                         return true;
3946                 }
3947         }
3948
3949         if (INTEL_INFO(dev)->num_pipes == 2)
3950                 return true;
3951
3952         /* Ivybridge 3 pipe is really complicated */
3953         switch (pipe) {
3954         case PIPE_A:
3955                 return true;
3956         case PIPE_B:
3957                 if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
3958                     pipe_config->fdi_lanes > 2) {
3959                         DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
3960                                       pipe_name(pipe), pipe_config->fdi_lanes);
3961                         return false;
3962                 }
3963                 return true;
3964         case PIPE_C:
3965                 if (!pipe_has_enabled_pch(pipe_B_crtc) ||
3966                     pipe_B_crtc->config.fdi_lanes <= 2) {
3967                         if (pipe_config->fdi_lanes > 2) {
3968                                 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
3969                                               pipe_name(pipe), pipe_config->fdi_lanes);
3970                                 return false;
3971                         }
3972                 } else {
3973                         DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
3974                         return false;
3975                 }
3976                 return true;
3977         default:
3978                 BUG();
3979         }
3980 }
3981
3982 #define RETRY 1
3983 static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
3984                                        struct intel_crtc_config *pipe_config)
3985 {
3986         struct drm_device *dev = intel_crtc->base.dev;
3987         struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
3988         int lane, link_bw, fdi_dotclock;
3989         bool setup_ok, needs_recompute = false;
3990
3991 retry:
3992         /* FDI is a binary signal running at ~2.7GHz, encoding
3993          * each output octet as 10 bits. The actual frequency
3994          * is stored as a divider into a 100MHz clock, and the
3995          * mode pixel clock is stored in units of 1KHz.
3996          * Hence the bw of each lane in terms of the mode signal
3997          * is:
3998          */
3999         link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
4000
4001         fdi_dotclock = adjusted_mode->clock;
4002         fdi_dotclock /= pipe_config->pixel_multiplier;
4003
4004         lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
4005                                            pipe_config->pipe_bpp);
4006
4007         pipe_config->fdi_lanes = lane;
4008
4009         intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
4010                                link_bw, &pipe_config->fdi_m_n);
4011
4012         setup_ok = ironlake_check_fdi_lanes(intel_crtc->base.dev,
4013                                             intel_crtc->pipe, pipe_config);
4014         if (!setup_ok && pipe_config->pipe_bpp > 6*3) {
4015                 pipe_config->pipe_bpp -= 2*3;
4016                 DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
4017                               pipe_config->pipe_bpp);
4018                 needs_recompute = true;
4019                 pipe_config->bw_constrained = true;
4020
4021                 goto retry;
4022         }
4023
4024         if (needs_recompute)
4025                 return RETRY;
4026
4027         return setup_ok ? 0 : -EINVAL;
4028 }
4029
4030 static void hsw_compute_ips_config(struct intel_crtc *crtc,
4031                                    struct intel_crtc_config *pipe_config)
4032 {
4033         pipe_config->ips_enabled = i915_enable_ips &&
4034                                    hsw_crtc_supports_ips(crtc) &&
4035                                    pipe_config->pipe_bpp == 24;
4036 }
4037
4038 static int intel_crtc_compute_config(struct intel_crtc *crtc,
4039                                      struct intel_crtc_config *pipe_config)
4040 {
4041         struct drm_device *dev = crtc->base.dev;
4042         struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
4043
4044         if (HAS_PCH_SPLIT(dev)) {
4045                 /* FDI link clock is fixed at 2.7G */
4046                 if (pipe_config->requested_mode.clock * 3
4047                     > IRONLAKE_FDI_FREQ * 4)
4048                         return -EINVAL;
4049         }
4050
4051         /* All interlaced capable intel hw wants timings in frames. Note though
4052          * that intel_lvds_mode_fixup does some funny tricks with the crtc
4053          * timings, so we need to be careful not to clobber these.*/
4054         if (!pipe_config->timings_set)
4055                 drm_mode_set_crtcinfo(adjusted_mode, 0);
4056
4057         /* Cantiga+ cannot handle modes with a hsync front porch of 0.
4058          * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
4059          */
4060         if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) &&
4061                 adjusted_mode->hsync_start == adjusted_mode->hdisplay)
4062                 return -EINVAL;
4063
4064         if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) && pipe_config->pipe_bpp > 10*3) {
4065                 pipe_config->pipe_bpp = 10*3; /* 12bpc is gen5+ */
4066         } else if (INTEL_INFO(dev)->gen <= 4 && pipe_config->pipe_bpp > 8*3) {
4067                 /* only a 8bpc pipe, with 6bpc dither through the panel fitter
4068                  * for lvds. */
4069                 pipe_config->pipe_bpp = 8*3;
4070         }
4071
4072         if (HAS_IPS(dev))
4073                 hsw_compute_ips_config(crtc, pipe_config);
4074
4075         /* XXX: PCH clock sharing is done in ->mode_set, so make sure the old
4076          * clock survives for now. */
4077         if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
4078                 pipe_config->shared_dpll = crtc->config.shared_dpll;
4079
4080         if (pipe_config->has_pch_encoder)
4081                 return ironlake_fdi_compute_config(crtc, pipe_config);
4082
4083         return 0;
4084 }
4085
4086 static int valleyview_get_display_clock_speed(struct drm_device *dev)
4087 {
4088         return 400000; /* FIXME */
4089 }
4090
4091 static int i945_get_display_clock_speed(struct drm_device *dev)
4092 {
4093         return 400000;
4094 }
4095
4096 static int i915_get_display_clock_speed(struct drm_device *dev)
4097 {
4098         return 333000;
4099 }
4100
4101 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
4102 {
4103         return 200000;
4104 }
4105
4106 static int i915gm_get_display_clock_speed(struct drm_device *dev)
4107 {
4108         u16 gcfgc = 0;
4109
4110         pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
4111
4112         if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
4113                 return 133000;
4114         else {
4115                 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
4116                 case GC_DISPLAY_CLOCK_333_MHZ:
4117                         return 333000;
4118                 default:
4119                 case GC_DISPLAY_CLOCK_190_200_MHZ:
4120                         return 190000;
4121                 }
4122         }
4123 }
4124
4125 static int i865_get_display_clock_speed(struct drm_device *dev)
4126 {
4127         return 266000;
4128 }
4129
4130 static int i855_get_display_clock_speed(struct drm_device *dev)
4131 {
4132         u16 hpllcc = 0;
4133         /* Assume that the hardware is in the high speed state.  This
4134          * should be the default.
4135          */
4136         switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
4137         case GC_CLOCK_133_200:
4138         case GC_CLOCK_100_200:
4139                 return 200000;
4140         case GC_CLOCK_166_250:
4141                 return 250000;
4142         case GC_CLOCK_100_133:
4143                 return 133000;
4144         }
4145
4146         /* Shouldn't happen */
4147         return 0;
4148 }
4149
4150 static int i830_get_display_clock_speed(struct drm_device *dev)
4151 {
4152         return 133000;
4153 }
4154
4155 static void
4156 intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
4157 {
4158         while (*num > DATA_LINK_M_N_MASK ||
4159                *den > DATA_LINK_M_N_MASK) {
4160                 *num >>= 1;
4161                 *den >>= 1;
4162         }
4163 }
4164
4165 static void compute_m_n(unsigned int m, unsigned int n,
4166                         uint32_t *ret_m, uint32_t *ret_n)
4167 {
4168         *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
4169         *ret_m = div_u64((uint64_t) m * *ret_n, n);
4170         intel_reduce_m_n_ratio(ret_m, ret_n);
4171 }
4172
4173 void
4174 intel_link_compute_m_n(int bits_per_pixel, int nlanes,
4175                        int pixel_clock, int link_clock,
4176                        struct intel_link_m_n *m_n)
4177 {
4178         m_n->tu = 64;
4179
4180         compute_m_n(bits_per_pixel * pixel_clock,
4181                     link_clock * nlanes * 8,
4182                     &m_n->gmch_m, &m_n->gmch_n);
4183
4184         compute_m_n(pixel_clock, link_clock,
4185                     &m_n->link_m, &m_n->link_n);
4186 }
4187
4188 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
4189 {
4190         if (i915_panel_use_ssc >= 0)
4191                 return i915_panel_use_ssc != 0;
4192         return dev_priv->vbt.lvds_use_ssc
4193                 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
4194 }
4195
4196 static int vlv_get_refclk(struct drm_crtc *crtc)
4197 {
4198         struct drm_device *dev = crtc->dev;
4199         struct drm_i915_private *dev_priv = dev->dev_private;
4200         int refclk = 27000; /* for DP & HDMI */
4201
4202         return 100000; /* only one validated so far */
4203
4204         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
4205                 refclk = 96000;
4206         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
4207                 if (intel_panel_use_ssc(dev_priv))
4208                         refclk = 100000;
4209                 else
4210                         refclk = 96000;
4211         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
4212                 refclk = 100000;
4213         }
4214
4215         return refclk;
4216 }
4217
4218 static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
4219 {
4220         struct drm_device *dev = crtc->dev;
4221         struct drm_i915_private *dev_priv = dev->dev_private;
4222         int refclk;
4223
4224         if (IS_VALLEYVIEW(dev)) {
4225                 refclk = vlv_get_refclk(crtc);
4226         } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
4227             intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
4228                 refclk = dev_priv->vbt.lvds_ssc_freq * 1000;
4229                 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
4230                               refclk / 1000);
4231         } else if (!IS_GEN2(dev)) {
4232                 refclk = 96000;
4233         } else {
4234                 refclk = 48000;
4235         }
4236
4237         return refclk;
4238 }
4239
4240 static uint32_t pnv_dpll_compute_fp(struct dpll *dpll)
4241 {
4242         return (1 << dpll->n) << 16 | dpll->m2;
4243 }
4244
4245 static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll)
4246 {
4247         return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
4248 }
4249
4250 static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
4251                                      intel_clock_t *reduced_clock)
4252 {
4253         struct drm_device *dev = crtc->base.dev;
4254         struct drm_i915_private *dev_priv = dev->dev_private;
4255         int pipe = crtc->pipe;
4256         u32 fp, fp2 = 0;
4257
4258         if (IS_PINEVIEW(dev)) {
4259                 fp = pnv_dpll_compute_fp(&crtc->config.dpll);
4260                 if (reduced_clock)
4261                         fp2 = pnv_dpll_compute_fp(reduced_clock);
4262         } else {
4263                 fp = i9xx_dpll_compute_fp(&crtc->config.dpll);
4264                 if (reduced_clock)
4265                         fp2 = i9xx_dpll_compute_fp(reduced_clock);
4266         }
4267
4268         I915_WRITE(FP0(pipe), fp);
4269
4270         crtc->lowfreq_avail = false;
4271         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4272             reduced_clock && i915_powersave) {
4273                 I915_WRITE(FP1(pipe), fp2);
4274                 crtc->lowfreq_avail = true;
4275         } else {
4276                 I915_WRITE(FP1(pipe), fp);
4277         }
4278 }
4279
4280 static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv)
4281 {
4282         u32 reg_val;
4283
4284         /*
4285          * PLLB opamp always calibrates to max value of 0x3f, force enable it
4286          * and set it to a reasonable value instead.
4287          */
4288         reg_val = vlv_dpio_read(dev_priv, DPIO_IREF(1));
4289         reg_val &= 0xffffff00;
4290         reg_val |= 0x00000030;
4291         vlv_dpio_write(dev_priv, DPIO_IREF(1), reg_val);
4292
4293         reg_val = vlv_dpio_read(dev_priv, DPIO_CALIBRATION);
4294         reg_val &= 0x8cffffff;
4295         reg_val = 0x8c000000;
4296         vlv_dpio_write(dev_priv, DPIO_CALIBRATION, reg_val);
4297
4298         reg_val = vlv_dpio_read(dev_priv, DPIO_IREF(1));
4299         reg_val &= 0xffffff00;
4300         vlv_dpio_write(dev_priv, DPIO_IREF(1), reg_val);
4301
4302         reg_val = vlv_dpio_read(dev_priv, DPIO_CALIBRATION);
4303         reg_val &= 0x00ffffff;
4304         reg_val |= 0xb0000000;
4305         vlv_dpio_write(dev_priv, DPIO_CALIBRATION, reg_val);
4306 }
4307
4308 static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc,
4309                                          struct intel_link_m_n *m_n)
4310 {
4311         struct drm_device *dev = crtc->base.dev;
4312         struct drm_i915_private *dev_priv = dev->dev_private;
4313         int pipe = crtc->pipe;
4314
4315         I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
4316         I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
4317         I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
4318         I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
4319 }
4320
4321 static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc,
4322                                          struct intel_link_m_n *m_n)
4323 {
4324         struct drm_device *dev = crtc->base.dev;
4325         struct drm_i915_private *dev_priv = dev->dev_private;
4326         int pipe = crtc->pipe;
4327         enum transcoder transcoder = crtc->config.cpu_transcoder;
4328
4329         if (INTEL_INFO(dev)->gen >= 5) {
4330                 I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
4331                 I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
4332                 I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
4333                 I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
4334         } else {
4335                 I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
4336                 I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
4337                 I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
4338                 I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
4339         }
4340 }
4341
4342 static void intel_dp_set_m_n(struct intel_crtc *crtc)
4343 {
4344         if (crtc->config.has_pch_encoder)
4345                 intel_pch_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
4346         else
4347                 intel_cpu_transcoder_set_m_n(crtc, &crtc->config.dp_m_n);
4348 }
4349
4350 static void vlv_update_pll(struct intel_crtc *crtc)
4351 {
4352         struct drm_device *dev = crtc->base.dev;
4353         struct drm_i915_private *dev_priv = dev->dev_private;
4354         struct intel_encoder *encoder;
4355         int pipe = crtc->pipe;
4356         u32 dpll, mdiv;
4357         u32 bestn, bestm1, bestm2, bestp1, bestp2;
4358         bool is_hdmi;
4359         u32 coreclk, reg_val, dpll_md;
4360
4361         mutex_lock(&dev_priv->dpio_lock);
4362
4363         is_hdmi = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
4364
4365         bestn = crtc->config.dpll.n;
4366         bestm1 = crtc->config.dpll.m1;
4367         bestm2 = crtc->config.dpll.m2;
4368         bestp1 = crtc->config.dpll.p1;
4369         bestp2 = crtc->config.dpll.p2;
4370
4371         /* See eDP HDMI DPIO driver vbios notes doc */
4372
4373         /* PLL B needs special handling */
4374         if (pipe)
4375                 vlv_pllb_recal_opamp(dev_priv);
4376
4377         /* Set up Tx target for periodic Rcomp update */
4378         vlv_dpio_write(dev_priv, DPIO_IREF_BCAST, 0x0100000f);
4379
4380         /* Disable target IRef on PLL */
4381         reg_val = vlv_dpio_read(dev_priv, DPIO_IREF_CTL(pipe));
4382         reg_val &= 0x00ffffff;
4383         vlv_dpio_write(dev_priv, DPIO_IREF_CTL(pipe), reg_val);
4384
4385         /* Disable fast lock */
4386         vlv_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x610);
4387
4388         /* Set idtafcrecal before PLL is enabled */
4389         mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
4390         mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
4391         mdiv |= ((bestn << DPIO_N_SHIFT));
4392         mdiv |= (1 << DPIO_K_SHIFT);
4393
4394         /*
4395          * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
4396          * but we don't support that).
4397          * Note: don't use the DAC post divider as it seems unstable.
4398          */
4399         mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
4400         vlv_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
4401
4402         mdiv |= DPIO_ENABLE_CALIBRATION;
4403         vlv_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
4404
4405         /* Set HBR and RBR LPF coefficients */
4406         if (crtc->config.port_clock == 162000 ||
4407             intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_ANALOG) ||
4408             intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI))
4409                 vlv_dpio_write(dev_priv, DPIO_LPF_COEFF(pipe),
4410                                  0x005f0021);
4411         else
4412                 vlv_dpio_write(dev_priv, DPIO_LPF_COEFF(pipe),
4413                                  0x00d0000f);
4414
4415         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
4416             intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) {
4417                 /* Use SSC source */
4418                 if (!pipe)
4419                         vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe),
4420                                          0x0df40000);
4421                 else
4422                         vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe),
4423                                          0x0df70000);
4424         } else { /* HDMI or VGA */
4425                 /* Use bend source */
4426                 if (!pipe)
4427                         vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe),
4428                                          0x0df70000);
4429                 else
4430                         vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe),
4431                                          0x0df40000);
4432         }
4433
4434         coreclk = vlv_dpio_read(dev_priv, DPIO_CORE_CLK(pipe));
4435         coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
4436         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT) ||
4437             intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP))
4438                 coreclk |= 0x01000000;
4439         vlv_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), coreclk);
4440
4441         vlv_dpio_write(dev_priv, DPIO_PLL_CML(pipe), 0x87871000);
4442
4443         for_each_encoder_on_crtc(dev, &crtc->base, encoder)
4444                 if (encoder->pre_pll_enable)
4445                         encoder->pre_pll_enable(encoder);
4446
4447         /* Enable DPIO clock input */
4448         dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
4449                 DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
4450         if (pipe)
4451                 dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
4452
4453         dpll |= DPLL_VCO_ENABLE;
4454         I915_WRITE(DPLL(pipe), dpll);
4455         POSTING_READ(DPLL(pipe));
4456         udelay(150);
4457
4458         if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
4459                 DRM_ERROR("DPLL %d failed to lock\n", pipe);
4460
4461         dpll_md = (crtc->config.pixel_multiplier - 1)
4462                 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
4463         I915_WRITE(DPLL_MD(pipe), dpll_md);
4464         POSTING_READ(DPLL_MD(pipe));
4465
4466         if (crtc->config.has_dp_encoder)
4467                 intel_dp_set_m_n(crtc);
4468
4469         mutex_unlock(&dev_priv->dpio_lock);
4470 }
4471
4472 static void i9xx_update_pll(struct intel_crtc *crtc,
4473                             intel_clock_t *reduced_clock,
4474                             int num_connectors)
4475 {
4476         struct drm_device *dev = crtc->base.dev;
4477         struct drm_i915_private *dev_priv = dev->dev_private;
4478         struct intel_encoder *encoder;
4479         int pipe = crtc->pipe;
4480         u32 dpll;
4481         bool is_sdvo;
4482         struct dpll *clock = &crtc->config.dpll;
4483
4484         i9xx_update_pll_dividers(crtc, reduced_clock);
4485
4486         is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
4487                 intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
4488
4489         dpll = DPLL_VGA_MODE_DIS;
4490
4491         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS))
4492                 dpll |= DPLLB_MODE_LVDS;
4493         else
4494                 dpll |= DPLLB_MODE_DAC_SERIAL;
4495
4496         if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
4497                 dpll |= (crtc->config.pixel_multiplier - 1)
4498                         << SDVO_MULTIPLIER_SHIFT_HIRES;
4499         }
4500
4501         if (is_sdvo)
4502                 dpll |= DPLL_DVO_HIGH_SPEED;
4503
4504         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
4505                 dpll |= DPLL_DVO_HIGH_SPEED;
4506
4507         /* compute bitmask from p1 value */
4508         if (IS_PINEVIEW(dev))
4509                 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
4510         else {
4511                 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4512                 if (IS_G4X(dev) && reduced_clock)
4513                         dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
4514         }
4515         switch (clock->p2) {
4516         case 5:
4517                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
4518                 break;
4519         case 7:
4520                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
4521                 break;
4522         case 10:
4523                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
4524                 break;
4525         case 14:
4526                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
4527                 break;
4528         }
4529         if (INTEL_INFO(dev)->gen >= 4)
4530                 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
4531
4532         if (crtc->config.sdvo_tv_clock)
4533                 dpll |= PLL_REF_INPUT_TVCLKINBC;
4534         else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4535                  intel_panel_use_ssc(dev_priv) && num_connectors < 2)
4536                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
4537         else
4538                 dpll |= PLL_REF_INPUT_DREFCLK;
4539
4540         dpll |= DPLL_VCO_ENABLE;
4541         I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
4542         POSTING_READ(DPLL(pipe));
4543         udelay(150);
4544
4545         for_each_encoder_on_crtc(dev, &crtc->base, encoder)
4546                 if (encoder->pre_pll_enable)
4547                         encoder->pre_pll_enable(encoder);
4548
4549         if (crtc->config.has_dp_encoder)
4550                 intel_dp_set_m_n(crtc);
4551
4552         I915_WRITE(DPLL(pipe), dpll);
4553
4554         /* Wait for the clocks to stabilize. */
4555         POSTING_READ(DPLL(pipe));
4556         udelay(150);
4557
4558         if (INTEL_INFO(dev)->gen >= 4) {
4559                 u32 dpll_md = (crtc->config.pixel_multiplier - 1)
4560                         << DPLL_MD_UDI_MULTIPLIER_SHIFT;
4561                 I915_WRITE(DPLL_MD(pipe), dpll_md);
4562         } else {
4563                 /* The pixel multiplier can only be updated once the
4564                  * DPLL is enabled and the clocks are stable.
4565                  *
4566                  * So write it again.
4567                  */
4568                 I915_WRITE(DPLL(pipe), dpll);
4569         }
4570 }
4571
4572 static void i8xx_update_pll(struct intel_crtc *crtc,
4573                             intel_clock_t *reduced_clock,
4574                             int num_connectors)
4575 {
4576         struct drm_device *dev = crtc->base.dev;
4577         struct drm_i915_private *dev_priv = dev->dev_private;
4578         struct intel_encoder *encoder;
4579         int pipe = crtc->pipe;
4580         u32 dpll;
4581         struct dpll *clock = &crtc->config.dpll;
4582
4583         i9xx_update_pll_dividers(crtc, reduced_clock);
4584
4585         dpll = DPLL_VGA_MODE_DIS;
4586
4587         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)) {
4588                 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4589         } else {
4590                 if (clock->p1 == 2)
4591                         dpll |= PLL_P1_DIVIDE_BY_TWO;
4592                 else
4593                         dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4594                 if (clock->p2 == 4)
4595                         dpll |= PLL_P2_DIVIDE_BY_4;
4596         }
4597
4598         if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
4599                  intel_panel_use_ssc(dev_priv) && num_connectors < 2)
4600                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
4601         else
4602                 dpll |= PLL_REF_INPUT_DREFCLK;
4603
4604         dpll |= DPLL_VCO_ENABLE;
4605         I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
4606         POSTING_READ(DPLL(pipe));
4607         udelay(150);
4608
4609         for_each_encoder_on_crtc(dev, &crtc->base, encoder)
4610                 if (encoder->pre_pll_enable)
4611                         encoder->pre_pll_enable(encoder);
4612
4613         I915_WRITE(DPLL(pipe), dpll);
4614
4615         /* Wait for the clocks to stabilize. */
4616         POSTING_READ(DPLL(pipe));
4617         udelay(150);
4618
4619         /* The pixel multiplier can only be updated once the
4620          * DPLL is enabled and the clocks are stable.
4621          *
4622          * So write it again.
4623          */
4624         I915_WRITE(DPLL(pipe), dpll);
4625 }
4626
4627 static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
4628 {
4629         struct drm_device *dev = intel_crtc->base.dev;
4630         struct drm_i915_private *dev_priv = dev->dev_private;
4631         enum pipe pipe = intel_crtc->pipe;
4632         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
4633         struct drm_display_mode *adjusted_mode =
4634                 &intel_crtc->config.adjusted_mode;
4635         struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
4636         uint32_t vsyncshift, crtc_vtotal, crtc_vblank_end;
4637
4638         /* We need to be careful not to changed the adjusted mode, for otherwise
4639          * the hw state checker will get angry at the mismatch. */
4640         crtc_vtotal = adjusted_mode->crtc_vtotal;
4641         crtc_vblank_end = adjusted_mode->crtc_vblank_end;
4642
4643         if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
4644                 /* the chip adds 2 halflines automatically */
4645                 crtc_vtotal -= 1;
4646                 crtc_vblank_end -= 1;
4647                 vsyncshift = adjusted_mode->crtc_hsync_start
4648                              - adjusted_mode->crtc_htotal / 2;
4649         } else {
4650                 vsyncshift = 0;
4651         }
4652
4653         if (INTEL_INFO(dev)->gen > 3)
4654                 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
4655
4656         I915_WRITE(HTOTAL(cpu_transcoder),
4657                    (adjusted_mode->crtc_hdisplay - 1) |
4658                    ((adjusted_mode->crtc_htotal - 1) << 16));
4659         I915_WRITE(HBLANK(cpu_transcoder),
4660                    (adjusted_mode->crtc_hblank_start - 1) |
4661                    ((adjusted_mode->crtc_hblank_end - 1) << 16));
4662         I915_WRITE(HSYNC(cpu_transcoder),
4663                    (adjusted_mode->crtc_hsync_start - 1) |
4664                    ((adjusted_mode->crtc_hsync_end - 1) << 16));
4665
4666         I915_WRITE(VTOTAL(cpu_transcoder),
4667                    (adjusted_mode->crtc_vdisplay - 1) |
4668                    ((crtc_vtotal - 1) << 16));
4669         I915_WRITE(VBLANK(cpu_transcoder),
4670                    (adjusted_mode->crtc_vblank_start - 1) |
4671                    ((crtc_vblank_end - 1) << 16));
4672         I915_WRITE(VSYNC(cpu_transcoder),
4673                    (adjusted_mode->crtc_vsync_start - 1) |
4674                    ((adjusted_mode->crtc_vsync_end - 1) << 16));
4675
4676         /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
4677          * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
4678          * documented on the DDI_FUNC_CTL register description, EDP Input Select
4679          * bits. */
4680         if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
4681             (pipe == PIPE_B || pipe == PIPE_C))
4682                 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
4683
4684         /* pipesrc controls the size that is scaled from, which should
4685          * always be the user's requested size.
4686          */
4687         I915_WRITE(PIPESRC(pipe),
4688                    ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
4689 }
4690
4691 static void intel_get_pipe_timings(struct intel_crtc *crtc,
4692                                    struct intel_crtc_config *pipe_config)
4693 {
4694         struct drm_device *dev = crtc->base.dev;
4695         struct drm_i915_private *dev_priv = dev->dev_private;
4696         enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
4697         uint32_t tmp;
4698
4699         tmp = I915_READ(HTOTAL(cpu_transcoder));
4700         pipe_config->adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
4701         pipe_config->adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
4702         tmp = I915_READ(HBLANK(cpu_transcoder));
4703         pipe_config->adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1;
4704         pipe_config->adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1;
4705         tmp = I915_READ(HSYNC(cpu_transcoder));
4706         pipe_config->adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
4707         pipe_config->adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
4708
4709         tmp = I915_READ(VTOTAL(cpu_transcoder));
4710         pipe_config->adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
4711         pipe_config->adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
4712         tmp = I915_READ(VBLANK(cpu_transcoder));
4713         pipe_config->adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1;
4714         pipe_config->adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1;
4715         tmp = I915_READ(VSYNC(cpu_transcoder));
4716         pipe_config->adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
4717         pipe_config->adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
4718
4719         if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) {
4720                 pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
4721                 pipe_config->adjusted_mode.crtc_vtotal += 1;
4722                 pipe_config->adjusted_mode.crtc_vblank_end += 1;
4723         }
4724
4725         tmp = I915_READ(PIPESRC(crtc->pipe));
4726         pipe_config->requested_mode.vdisplay = (tmp & 0xffff) + 1;
4727         pipe_config->requested_mode.hdisplay = ((tmp >> 16) & 0xffff) + 1;
4728 }
4729
4730 static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
4731 {
4732         struct drm_device *dev = intel_crtc->base.dev;
4733         struct drm_i915_private *dev_priv = dev->dev_private;
4734         uint32_t pipeconf;
4735
4736         pipeconf = 0;
4737
4738         if (intel_crtc->pipe == 0 && INTEL_INFO(dev)->gen < 4) {
4739                 /* Enable pixel doubling when the dot clock is > 90% of the (display)
4740                  * core speed.
4741                  *
4742                  * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
4743                  * pipe == 0 check?
4744                  */
4745                 if (intel_crtc->config.requested_mode.clock >
4746                     dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
4747                         pipeconf |= PIPECONF_DOUBLE_WIDE;
4748         }
4749
4750         /* only g4x and later have fancy bpc/dither controls */
4751         if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
4752                 /* Bspec claims that we can't use dithering for 30bpp pipes. */
4753                 if (intel_crtc->config.dither && intel_crtc->config.pipe_bpp != 30)
4754                         pipeconf |= PIPECONF_DITHER_EN |
4755                                     PIPECONF_DITHER_TYPE_SP;
4756
4757                 switch (intel_crtc->config.pipe_bpp) {
4758                 case 18:
4759                         pipeconf |= PIPECONF_6BPC;
4760                         break;
4761                 case 24:
4762                         pipeconf |= PIPECONF_8BPC;
4763                         break;
4764                 case 30:
4765                         pipeconf |= PIPECONF_10BPC;
4766                         break;
4767                 default:
4768                         /* Case prevented by intel_choose_pipe_bpp_dither. */
4769                         BUG();
4770                 }
4771         }
4772
4773         if (HAS_PIPE_CXSR(dev)) {
4774                 if (intel_crtc->lowfreq_avail) {
4775                         DRM_DEBUG_KMS("enabling CxSR downclocking\n");
4776                         pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
4777                 } else {
4778                         DRM_DEBUG_KMS("disabling CxSR downclocking\n");
4779                 }
4780         }
4781
4782         if (!IS_GEN2(dev) &&
4783             intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
4784                 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
4785         else
4786                 pipeconf |= PIPECONF_PROGRESSIVE;
4787
4788         if (IS_VALLEYVIEW(dev) && intel_crtc->config.limited_color_range)
4789                 pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
4790
4791         I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
4792         POSTING_READ(PIPECONF(intel_crtc->pipe));
4793 }
4794
4795 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
4796                               int x, int y,
4797                               struct drm_framebuffer *fb)
4798 {
4799         struct drm_device *dev = crtc->dev;
4800         struct drm_i915_private *dev_priv = dev->dev_private;
4801         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4802         struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
4803         int pipe = intel_crtc->pipe;
4804         int plane = intel_crtc->plane;
4805         int refclk, num_connectors = 0;
4806         intel_clock_t clock, reduced_clock;
4807         u32 dspcntr;
4808         bool ok, has_reduced_clock = false;
4809         bool is_lvds = false;
4810         struct intel_encoder *encoder;
4811         const intel_limit_t *limit;
4812         int ret;
4813
4814         for_each_encoder_on_crtc(dev, crtc, encoder) {
4815                 switch (encoder->type) {
4816                 case INTEL_OUTPUT_LVDS:
4817                         is_lvds = true;
4818                         break;
4819                 }
4820
4821                 num_connectors++;
4822         }
4823
4824         refclk = i9xx_get_refclk(crtc, num_connectors);
4825
4826         /*
4827          * Returns a set of divisors for the desired target clock with the given
4828          * refclk, or FALSE.  The returned values represent the clock equation:
4829          * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
4830          */
4831         limit = intel_limit(crtc, refclk);
4832         ok = dev_priv->display.find_dpll(limit, crtc,
4833                                          intel_crtc->config.port_clock,
4834                                          refclk, NULL, &clock);
4835         if (!ok && !intel_crtc->config.clock_set) {
4836                 DRM_ERROR("Couldn't find PLL settings for mode!\n");
4837                 return -EINVAL;
4838         }
4839
4840         /* Ensure that the cursor is valid for the new mode before changing... */
4841         intel_crtc_update_cursor(crtc, true);
4842
4843         if (is_lvds && dev_priv->lvds_downclock_avail) {
4844                 /*
4845                  * Ensure we match the reduced clock's P to the target clock.
4846                  * If the clocks don't match, we can't switch the display clock
4847                  * by using the FP0/FP1. In such case we will disable the LVDS
4848                  * downclock feature.
4849                 */
4850                 has_reduced_clock =
4851                         dev_priv->display.find_dpll(limit, crtc,
4852                                                     dev_priv->lvds_downclock,
4853                                                     refclk, &clock,
4854                                                     &reduced_clock);
4855         }
4856         /* Compat-code for transition, will disappear. */
4857         if (!intel_crtc->config.clock_set) {
4858                 intel_crtc->config.dpll.n = clock.n;
4859                 intel_crtc->config.dpll.m1 = clock.m1;
4860                 intel_crtc->config.dpll.m2 = clock.m2;
4861                 intel_crtc->config.dpll.p1 = clock.p1;
4862                 intel_crtc->config.dpll.p2 = clock.p2;
4863         }
4864
4865         if (IS_GEN2(dev))
4866                 i8xx_update_pll(intel_crtc,
4867                                 has_reduced_clock ? &reduced_clock : NULL,
4868                                 num_connectors);
4869         else if (IS_VALLEYVIEW(dev))
4870                 vlv_update_pll(intel_crtc);
4871         else
4872                 i9xx_update_pll(intel_crtc,
4873                                 has_reduced_clock ? &reduced_clock : NULL,
4874                                 num_connectors);
4875
4876         /* Set up the display plane register */
4877         dspcntr = DISPPLANE_GAMMA_ENABLE;
4878
4879         if (!IS_VALLEYVIEW(dev)) {
4880                 if (pipe == 0)
4881                         dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
4882                 else
4883                         dspcntr |= DISPPLANE_SEL_PIPE_B;
4884         }
4885
4886         intel_set_pipe_timings(intel_crtc);
4887
4888         /* pipesrc and dspsize control the size that is scaled from,
4889          * which should always be the user's requested size.
4890          */
4891         I915_WRITE(DSPSIZE(plane),
4892                    ((mode->vdisplay - 1) << 16) |
4893                    (mode->hdisplay - 1));
4894         I915_WRITE(DSPPOS(plane), 0);
4895
4896         i9xx_set_pipeconf(intel_crtc);
4897
4898         I915_WRITE(DSPCNTR(plane), dspcntr);
4899         POSTING_READ(DSPCNTR(plane));
4900
4901         ret = intel_pipe_set_base(crtc, x, y, fb);
4902
4903         intel_update_watermarks(dev);
4904
4905         return ret;
4906 }
4907
4908 static void i9xx_get_pfit_config(struct intel_crtc *crtc,
4909                                  struct intel_crtc_config *pipe_config)
4910 {
4911         struct drm_device *dev = crtc->base.dev;
4912         struct drm_i915_private *dev_priv = dev->dev_private;
4913         uint32_t tmp;
4914
4915         tmp = I915_READ(PFIT_CONTROL);
4916
4917         if (INTEL_INFO(dev)->gen < 4) {
4918                 if (crtc->pipe != PIPE_B)
4919                         return;
4920
4921                 /* gen2/3 store dither state in pfit control, needs to match */
4922                 pipe_config->gmch_pfit.control = tmp & PANEL_8TO6_DITHER_ENABLE;
4923         } else {
4924                 if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
4925                         return;
4926         }
4927
4928         if (!(tmp & PFIT_ENABLE))
4929                 return;
4930
4931         pipe_config->gmch_pfit.control = I915_READ(PFIT_CONTROL);
4932         pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
4933         if (INTEL_INFO(dev)->gen < 5)
4934                 pipe_config->gmch_pfit.lvds_border_bits =
4935                         I915_READ(LVDS) & LVDS_BORDER_ENABLE;
4936 }
4937
4938 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
4939                                  struct intel_crtc_config *pipe_config)
4940 {
4941         struct drm_device *dev = crtc->base.dev;
4942         struct drm_i915_private *dev_priv = dev->dev_private;
4943         uint32_t tmp;
4944
4945         pipe_config->cpu_transcoder = crtc->pipe;
4946         pipe_config->shared_dpll = DPLL_ID_PRIVATE;
4947
4948         tmp = I915_READ(PIPECONF(crtc->pipe));
4949         if (!(tmp & PIPECONF_ENABLE))
4950                 return false;
4951
4952         intel_get_pipe_timings(crtc, pipe_config);
4953
4954         i9xx_get_pfit_config(crtc, pipe_config);
4955
4956         if (INTEL_INFO(dev)->gen >= 4) {
4957                 tmp = I915_READ(DPLL_MD(crtc->pipe));
4958                 pipe_config->pixel_multiplier =
4959                         ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
4960                          >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
4961         } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
4962                 tmp = I915_READ(DPLL(crtc->pipe));
4963                 pipe_config->pixel_multiplier =
4964                         ((tmp & SDVO_MULTIPLIER_MASK)
4965                          >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
4966         } else {
4967                 /* Note that on i915G/GM the pixel multiplier is in the sdvo
4968                  * port and will be fixed up in the encoder->get_config
4969                  * function. */
4970                 pipe_config->pixel_multiplier = 1;
4971         }
4972
4973         return true;
4974 }
4975
4976 static void ironlake_init_pch_refclk(struct drm_device *dev)
4977 {
4978         struct drm_i915_private *dev_priv = dev->dev_private;
4979         struct drm_mode_config *mode_config = &dev->mode_config;
4980         struct intel_encoder *encoder;
4981         u32 val, final;
4982         bool has_lvds = false;
4983         bool has_cpu_edp = false;
4984         bool has_panel = false;
4985         bool has_ck505 = false;
4986         bool can_ssc = false;
4987
4988         /* We need to take the global config into account */
4989         list_for_each_entry(encoder, &mode_config->encoder_list,
4990                             base.head) {
4991                 switch (encoder->type) {
4992                 case INTEL_OUTPUT_LVDS:
4993                         has_panel = true;
4994                         has_lvds = true;
4995                         break;
4996                 case INTEL_OUTPUT_EDP:
4997                         has_panel = true;
4998                         if (enc_to_dig_port(&encoder->base)->port == PORT_A)
4999                                 has_cpu_edp = true;
5000                         break;
5001                 }
5002         }
5003
5004         if (HAS_PCH_IBX(dev)) {
5005                 has_ck505 = dev_priv->vbt.display_clock_mode;
5006                 can_ssc = has_ck505;
5007         } else {
5008                 has_ck505 = false;
5009                 can_ssc = true;
5010         }
5011
5012         DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n",
5013                       has_panel, has_lvds, has_ck505);
5014
5015         /* Ironlake: try to setup display ref clock before DPLL
5016          * enabling. This is only under driver's control after
5017          * PCH B stepping, previous chipset stepping should be
5018          * ignoring this setting.
5019          */
5020         val = I915_READ(PCH_DREF_CONTROL);
5021
5022         /* As we must carefully and slowly disable/enable each source in turn,
5023          * compute the final state we want first and check if we need to
5024          * make any changes at all.
5025          */
5026         final = val;
5027         final &= ~DREF_NONSPREAD_SOURCE_MASK;
5028         if (has_ck505)
5029                 final |= DREF_NONSPREAD_CK505_ENABLE;
5030         else
5031                 final |= DREF_NONSPREAD_SOURCE_ENABLE;
5032
5033         final &= ~DREF_SSC_SOURCE_MASK;
5034         final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
5035         final &= ~DREF_SSC1_ENABLE;
5036
5037         if (has_panel) {
5038                 final |= DREF_SSC_SOURCE_ENABLE;
5039
5040                 if (intel_panel_use_ssc(dev_priv) && can_ssc)
5041                         final |= DREF_SSC1_ENABLE;
5042
5043                 if (has_cpu_edp) {
5044                         if (intel_panel_use_ssc(dev_priv) && can_ssc)
5045                                 final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
5046                         else
5047                                 final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
5048                 } else
5049                         final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5050         } else {
5051                 final |= DREF_SSC_SOURCE_DISABLE;
5052                 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5053         }
5054
5055         if (final == val)
5056                 return;
5057
5058         /* Always enable nonspread source */
5059         val &= ~DREF_NONSPREAD_SOURCE_MASK;
5060
5061         if (has_ck505)
5062                 val |= DREF_NONSPREAD_CK505_ENABLE;
5063         else
5064                 val |= DREF_NONSPREAD_SOURCE_ENABLE;
5065
5066         if (has_panel) {
5067                 val &= ~DREF_SSC_SOURCE_MASK;
5068                 val |= DREF_SSC_SOURCE_ENABLE;
5069
5070                 /* SSC must be turned on before enabling the CPU output  */
5071                 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
5072                         DRM_DEBUG_KMS("Using SSC on panel\n");
5073                         val |= DREF_SSC1_ENABLE;
5074                 } else
5075                         val &= ~DREF_SSC1_ENABLE;
5076
5077                 /* Get SSC going before enabling the outputs */
5078                 I915_WRITE(PCH_DREF_CONTROL, val);
5079                 POSTING_READ(PCH_DREF_CONTROL);
5080                 udelay(200);
5081
5082                 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
5083
5084                 /* Enable CPU source on CPU attached eDP */
5085                 if (has_cpu_edp) {
5086                         if (intel_panel_use_ssc(dev_priv) && can_ssc) {
5087                                 DRM_DEBUG_KMS("Using SSC on eDP\n");
5088                                 val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
5089                         }
5090                         else
5091                                 val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
5092                 } else
5093                         val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5094
5095                 I915_WRITE(PCH_DREF_CONTROL, val);
5096                 POSTING_READ(PCH_DREF_CONTROL);
5097                 udelay(200);
5098         } else {
5099                 DRM_DEBUG_KMS("Disabling SSC entirely\n");
5100
5101                 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
5102
5103                 /* Turn off CPU output */
5104                 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
5105
5106                 I915_WRITE(PCH_DREF_CONTROL, val);
5107                 POSTING_READ(PCH_DREF_CONTROL);
5108                 udelay(200);
5109
5110                 /* Turn off the SSC source */
5111                 val &= ~DREF_SSC_SOURCE_MASK;
5112                 val |= DREF_SSC_SOURCE_DISABLE;
5113
5114                 /* Turn off SSC1 */
5115                 val &= ~DREF_SSC1_ENABLE;
5116
5117                 I915_WRITE(PCH_DREF_CONTROL, val);
5118                 POSTING_READ(PCH_DREF_CONTROL);
5119                 udelay(200);
5120         }
5121
5122         BUG_ON(val != final);
5123 }
5124
5125 /* Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O. */
5126 static void lpt_init_pch_refclk(struct drm_device *dev)
5127 {
5128         struct drm_i915_private *dev_priv = dev->dev_private;
5129         struct drm_mode_config *mode_config = &dev->mode_config;
5130         struct intel_encoder *encoder;
5131         bool has_vga = false;
5132         bool is_sdv = false;
5133         u32 tmp;
5134
5135         list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
5136                 switch (encoder->type) {
5137                 case INTEL_OUTPUT_ANALOG:
5138                         has_vga = true;
5139                         break;
5140                 }
5141         }
5142
5143         if (!has_vga)
5144                 return;
5145
5146         mutex_lock(&dev_priv->dpio_lock);
5147
5148         /* XXX: Rip out SDV support once Haswell ships for real. */
5149         if (IS_HASWELL(dev) && (dev->pci_device & 0xFF00) == 0x0C00)
5150                 is_sdv = true;
5151
5152         tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
5153         tmp &= ~SBI_SSCCTL_DISABLE;
5154         tmp |= SBI_SSCCTL_PATHALT;
5155         intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
5156
5157         udelay(24);
5158
5159         tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
5160         tmp &= ~SBI_SSCCTL_PATHALT;
5161         intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
5162
5163         if (!is_sdv) {
5164                 tmp = I915_READ(SOUTH_CHICKEN2);
5165                 tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
5166                 I915_WRITE(SOUTH_CHICKEN2, tmp);
5167
5168                 if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
5169                                        FDI_MPHY_IOSFSB_RESET_STATUS, 100))
5170                         DRM_ERROR("FDI mPHY reset assert timeout\n");
5171
5172                 tmp = I915_READ(SOUTH_CHICKEN2);
5173                 tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
5174                 I915_WRITE(SOUTH_CHICKEN2, tmp);
5175
5176                 if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
5177                                         FDI_MPHY_IOSFSB_RESET_STATUS) == 0,
5178                                        100))
5179                         DRM_ERROR("FDI mPHY reset de-assert timeout\n");
5180         }
5181
5182         tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
5183         tmp &= ~(0xFF << 24);
5184         tmp |= (0x12 << 24);
5185         intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
5186
5187         if (is_sdv) {
5188                 tmp = intel_sbi_read(dev_priv, 0x800C, SBI_MPHY);
5189                 tmp |= 0x7FFF;
5190                 intel_sbi_write(dev_priv, 0x800C, tmp, SBI_MPHY);
5191         }
5192
5193         tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
5194         tmp |= (1 << 11);
5195         intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
5196
5197         tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
5198         tmp |= (1 << 11);
5199         intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
5200
5201         if (is_sdv) {
5202                 tmp = intel_sbi_read(dev_priv, 0x2038, SBI_MPHY);
5203                 tmp |= (0x3F << 24) | (0xF << 20) | (0xF << 16);
5204                 intel_sbi_write(dev_priv, 0x2038, tmp, SBI_MPHY);
5205
5206                 tmp = intel_sbi_read(dev_priv, 0x2138, SBI_MPHY);
5207                 tmp |= (0x3F << 24) | (0xF << 20) | (0xF << 16);
5208                 intel_sbi_write(dev_priv, 0x2138, tmp, SBI_MPHY);
5209
5210                 tmp = intel_sbi_read(dev_priv, 0x203C, SBI_MPHY);
5211                 tmp |= (0x3F << 8);
5212                 intel_sbi_write(dev_priv, 0x203C, tmp, SBI_MPHY);
5213
5214                 tmp = intel_sbi_read(dev_priv, 0x213C, SBI_MPHY);
5215                 tmp |= (0x3F << 8);
5216                 intel_sbi_write(dev_priv, 0x213C, tmp, SBI_MPHY);
5217         }
5218
5219         tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
5220         tmp |= (1 << 24) | (1 << 21) | (1 << 18);
5221         intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
5222
5223         tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
5224         tmp |= (1 << 24) | (1 << 21) | (1 << 18);
5225         intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
5226
5227         if (!is_sdv) {
5228                 tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
5229                 tmp &= ~(7 << 13);
5230                 tmp |= (5 << 13);
5231                 intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
5232
5233                 tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
5234                 tmp &= ~(7 << 13);
5235                 tmp |= (5 << 13);
5236                 intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
5237         }
5238
5239         tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
5240         tmp &= ~0xFF;
5241         tmp |= 0x1C;
5242         intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
5243
5244         tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
5245         tmp &= ~0xFF;
5246         tmp |= 0x1C;
5247         intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
5248
5249         tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
5250         tmp &= ~(0xFF << 16);
5251         tmp |= (0x1C << 16);
5252         intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
5253
5254         tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
5255         tmp &= ~(0xFF << 16);
5256         tmp |= (0x1C << 16);
5257         intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
5258
5259         if (!is_sdv) {
5260                 tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
5261                 tmp |= (1 << 27);
5262                 intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
5263
5264                 tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
5265                 tmp |= (1 << 27);
5266                 intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
5267
5268                 tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
5269                 tmp &= ~(0xF << 28);
5270                 tmp |= (4 << 28);
5271                 intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
5272
5273                 tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
5274                 tmp &= ~(0xF << 28);
5275                 tmp |= (4 << 28);
5276                 intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
5277         }
5278
5279         /* ULT uses SBI_GEN0, but ULT doesn't have VGA, so we don't care. */
5280         tmp = intel_sbi_read(dev_priv, SBI_DBUFF0, SBI_ICLK);
5281         tmp |= SBI_DBUFF0_ENABLE;
5282         intel_sbi_write(dev_priv, SBI_DBUFF0, tmp, SBI_ICLK);
5283
5284         mutex_unlock(&dev_priv->dpio_lock);
5285 }
5286
5287 /*
5288  * Initialize reference clocks when the driver loads
5289  */
5290 void intel_init_pch_refclk(struct drm_device *dev)
5291 {
5292         if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
5293                 ironlake_init_pch_refclk(dev);
5294         else if (HAS_PCH_LPT(dev))
5295                 lpt_init_pch_refclk(dev);
5296 }
5297
5298 static int ironlake_get_refclk(struct drm_crtc *crtc)
5299 {
5300         struct drm_device *dev = crtc->dev;
5301         struct drm_i915_private *dev_priv = dev->dev_private;
5302         struct intel_encoder *encoder;
5303         int num_connectors = 0;
5304         bool is_lvds = false;
5305
5306         for_each_encoder_on_crtc(dev, crtc, encoder) {
5307                 switch (encoder->type) {
5308                 case INTEL_OUTPUT_LVDS:
5309                         is_lvds = true;
5310                         break;
5311                 }
5312                 num_connectors++;
5313         }
5314
5315         if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
5316                 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
5317                               dev_priv->vbt.lvds_ssc_freq);
5318                 return dev_priv->vbt.lvds_ssc_freq * 1000;
5319         }
5320
5321         return 120000;
5322 }
5323
5324 static void ironlake_set_pipeconf(struct drm_crtc *crtc)
5325 {
5326         struct drm_i915_private *dev_priv = crtc->dev->dev_private;
5327         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5328         int pipe = intel_crtc->pipe;
5329         uint32_t val;
5330
5331         val = 0;
5332
5333         switch (intel_crtc->config.pipe_bpp) {
5334         case 18:
5335                 val |= PIPECONF_6BPC;
5336                 break;
5337         case 24:
5338                 val |= PIPECONF_8BPC;
5339                 break;
5340         case 30:
5341                 val |= PIPECONF_10BPC;
5342                 break;
5343         case 36:
5344                 val |= PIPECONF_12BPC;
5345                 break;
5346         default:
5347                 /* Case prevented by intel_choose_pipe_bpp_dither. */
5348                 BUG();
5349         }
5350
5351         if (intel_crtc->config.dither)
5352                 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
5353
5354         if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
5355                 val |= PIPECONF_INTERLACED_ILK;
5356         else
5357                 val |= PIPECONF_PROGRESSIVE;
5358
5359         if (intel_crtc->config.limited_color_range)
5360                 val |= PIPECONF_COLOR_RANGE_SELECT;
5361
5362         I915_WRITE(PIPECONF(pipe), val);
5363         POSTING_READ(PIPECONF(pipe));
5364 }
5365
5366 /*
5367  * Set up the pipe CSC unit.
5368  *
5369  * Currently only full range RGB to limited range RGB conversion
5370  * is supported, but eventually this should handle various
5371  * RGB<->YCbCr scenarios as well.
5372  */
5373 static void intel_set_pipe_csc(struct drm_crtc *crtc)
5374 {
5375         struct drm_device *dev = crtc->dev;
5376         struct drm_i915_private *dev_priv = dev->dev_private;
5377         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5378         int pipe = intel_crtc->pipe;
5379         uint16_t coeff = 0x7800; /* 1.0 */
5380
5381         /*
5382          * TODO: Check what kind of values actually come out of the pipe
5383          * with these coeff/postoff values and adjust to get the best
5384          * accuracy. Perhaps we even need to take the bpc value into
5385          * consideration.
5386          */
5387
5388         if (intel_crtc->config.limited_color_range)
5389                 coeff = ((235 - 16) * (1 << 12) / 255) & 0xff8; /* 0.xxx... */
5390
5391         /*
5392          * GY/GU and RY/RU should be the other way around according
5393          * to BSpec, but reality doesn't agree. Just set them up in
5394          * a way that results in the correct picture.
5395          */
5396         I915_WRITE(PIPE_CSC_COEFF_RY_GY(pipe), coeff << 16);
5397         I915_WRITE(PIPE_CSC_COEFF_BY(pipe), 0);
5398
5399         I915_WRITE(PIPE_CSC_COEFF_RU_GU(pipe), coeff);
5400         I915_WRITE(PIPE_CSC_COEFF_BU(pipe), 0);
5401
5402         I915_WRITE(PIPE_CSC_COEFF_RV_GV(pipe), 0);
5403         I915_WRITE(PIPE_CSC_COEFF_BV(pipe), coeff << 16);
5404
5405         I915_WRITE(PIPE_CSC_PREOFF_HI(pipe), 0);
5406         I915_WRITE(PIPE_CSC_PREOFF_ME(pipe), 0);
5407         I915_WRITE(PIPE_CSC_PREOFF_LO(pipe), 0);
5408
5409         if (INTEL_INFO(dev)->gen > 6) {
5410                 uint16_t postoff = 0;
5411
5412                 if (intel_crtc->config.limited_color_range)
5413                         postoff = (16 * (1 << 13) / 255) & 0x1fff;
5414
5415                 I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff);
5416                 I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
5417                 I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
5418
5419                 I915_WRITE(PIPE_CSC_MODE(pipe), 0);
5420         } else {
5421                 uint32_t mode = CSC_MODE_YUV_TO_RGB;
5422
5423                 if (intel_crtc->config.limited_color_range)
5424                         mode |= CSC_BLACK_SCREEN_OFFSET;
5425
5426                 I915_WRITE(PIPE_CSC_MODE(pipe), mode);
5427         }
5428 }
5429
5430 static void haswell_set_pipeconf(struct drm_crtc *crtc)
5431 {
5432         struct drm_i915_private *dev_priv = crtc->dev->dev_private;
5433         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5434         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
5435         uint32_t val;
5436
5437         val = 0;
5438
5439         if (intel_crtc->config.dither)
5440                 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
5441
5442         if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
5443                 val |= PIPECONF_INTERLACED_ILK;
5444         else
5445                 val |= PIPECONF_PROGRESSIVE;
5446
5447         I915_WRITE(PIPECONF(cpu_transcoder), val);
5448         POSTING_READ(PIPECONF(cpu_transcoder));
5449
5450         I915_WRITE(GAMMA_MODE(intel_crtc->pipe), GAMMA_MODE_MODE_8BIT);
5451         POSTING_READ(GAMMA_MODE(intel_crtc->pipe));
5452 }
5453
5454 static bool ironlake_compute_clocks(struct drm_crtc *crtc,
5455                                     intel_clock_t *clock,
5456                                     bool *has_reduced_clock,
5457                                     intel_clock_t *reduced_clock)
5458 {
5459         struct drm_device *dev = crtc->dev;
5460         struct drm_i915_private *dev_priv = dev->dev_private;
5461         struct intel_encoder *intel_encoder;
5462         int refclk;
5463         const intel_limit_t *limit;
5464         bool ret, is_lvds = false;
5465
5466         for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
5467                 switch (intel_encoder->type) {
5468                 case INTEL_OUTPUT_LVDS:
5469                         is_lvds = true;
5470                         break;
5471                 }
5472         }
5473
5474         refclk = ironlake_get_refclk(crtc);
5475
5476         /*
5477          * Returns a set of divisors for the desired target clock with the given
5478          * refclk, or FALSE.  The returned values represent the clock equation:
5479          * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
5480          */
5481         limit = intel_limit(crtc, refclk);
5482         ret = dev_priv->display.find_dpll(limit, crtc,
5483                                           to_intel_crtc(crtc)->config.port_clock,
5484                                           refclk, NULL, clock);
5485         if (!ret)
5486                 return false;
5487
5488         if (is_lvds && dev_priv->lvds_downclock_avail) {
5489                 /*
5490                  * Ensure we match the reduced clock's P to the target clock.
5491                  * If the clocks don't match, we can't switch the display clock
5492                  * by using the FP0/FP1. In such case we will disable the LVDS
5493                  * downclock feature.
5494                 */
5495                 *has_reduced_clock =
5496                         dev_priv->display.find_dpll(limit, crtc,
5497                                                     dev_priv->lvds_downclock,
5498                                                     refclk, clock,
5499                                                     reduced_clock);
5500         }
5501
5502         return true;
5503 }
5504
5505 static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
5506 {
5507         struct drm_i915_private *dev_priv = dev->dev_private;
5508         uint32_t temp;
5509
5510         temp = I915_READ(SOUTH_CHICKEN1);
5511         if (temp & FDI_BC_BIFURCATION_SELECT)
5512                 return;
5513
5514         WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
5515         WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
5516
5517         temp |= FDI_BC_BIFURCATION_SELECT;
5518         DRM_DEBUG_KMS("enabling fdi C rx\n");
5519         I915_WRITE(SOUTH_CHICKEN1, temp);
5520         POSTING_READ(SOUTH_CHICKEN1);
5521 }
5522
5523 static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
5524 {
5525         struct drm_device *dev = intel_crtc->base.dev;
5526         struct drm_i915_private *dev_priv = dev->dev_private;
5527
5528         switch (intel_crtc->pipe) {
5529         case PIPE_A:
5530                 break;
5531         case PIPE_B:
5532                 if (intel_crtc->config.fdi_lanes > 2)
5533                         WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
5534                 else
5535                         cpt_enable_fdi_bc_bifurcation(dev);
5536
5537                 break;
5538         case PIPE_C:
5539                 cpt_enable_fdi_bc_bifurcation(dev);
5540
5541                 break;
5542         default:
5543                 BUG();
5544         }
5545 }
5546
5547 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
5548 {
5549         /*
5550          * Account for spread spectrum to avoid
5551          * oversubscribing the link. Max center spread
5552          * is 2.5%; use 5% for safety's sake.
5553          */
5554         u32 bps = target_clock * bpp * 21 / 20;
5555         return bps / (link_bw * 8) + 1;
5556 }
5557
5558 static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
5559 {
5560         return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
5561 }
5562
5563 static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
5564                                       u32 *fp,
5565                                       intel_clock_t *reduced_clock, u32 *fp2)
5566 {
5567         struct drm_crtc *crtc = &intel_crtc->base;
5568         struct drm_device *dev = crtc->dev;
5569         struct drm_i915_private *dev_priv = dev->dev_private;
5570         struct intel_encoder *intel_encoder;
5571         uint32_t dpll;
5572         int factor, num_connectors = 0;
5573         bool is_lvds = false, is_sdvo = false;
5574
5575         for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
5576                 switch (intel_encoder->type) {
5577                 case INTEL_OUTPUT_LVDS:
5578                         is_lvds = true;
5579                         break;
5580                 case INTEL_OUTPUT_SDVO:
5581                 case INTEL_OUTPUT_HDMI:
5582                         is_sdvo = true;
5583                         break;
5584                 }
5585
5586                 num_connectors++;
5587         }
5588
5589         /* Enable autotuning of the PLL clock (if permissible) */
5590         factor = 21;
5591         if (is_lvds) {
5592                 if ((intel_panel_use_ssc(dev_priv) &&
5593                      dev_priv->vbt.lvds_ssc_freq == 100) ||
5594                     (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
5595                         factor = 25;
5596         } else if (intel_crtc->config.sdvo_tv_clock)
5597                 factor = 20;
5598
5599         if (ironlake_needs_fb_cb_tune(&intel_crtc->config.dpll, factor))
5600                 *fp |= FP_CB_TUNE;
5601
5602         if (fp2 && (reduced_clock->m < factor * reduced_clock->n))
5603                 *fp2 |= FP_CB_TUNE;
5604
5605         dpll = 0;
5606
5607         if (is_lvds)
5608                 dpll |= DPLLB_MODE_LVDS;
5609         else
5610                 dpll |= DPLLB_MODE_DAC_SERIAL;
5611
5612         dpll |= (intel_crtc->config.pixel_multiplier - 1)
5613                 << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
5614
5615         if (is_sdvo)
5616                 dpll |= DPLL_DVO_HIGH_SPEED;
5617         if (intel_crtc->config.has_dp_encoder)
5618                 dpll |= DPLL_DVO_HIGH_SPEED;
5619
5620         /* compute bitmask from p1 value */
5621         dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
5622         /* also FPA1 */
5623         dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
5624
5625         switch (intel_crtc->config.dpll.p2) {
5626         case 5:
5627                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
5628                 break;
5629         case 7:
5630                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
5631                 break;
5632         case 10:
5633                 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
5634                 break;
5635         case 14:
5636                 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
5637                 break;
5638         }
5639
5640         if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
5641                 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
5642         else
5643                 dpll |= PLL_REF_INPUT_DREFCLK;
5644
5645         return dpll | DPLL_VCO_ENABLE;
5646 }
5647
5648 static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
5649                                   int x, int y,
5650                                   struct drm_framebuffer *fb)
5651 {
5652         struct drm_device *dev = crtc->dev;
5653         struct drm_i915_private *dev_priv = dev->dev_private;
5654         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5655         int pipe = intel_crtc->pipe;
5656         int plane = intel_crtc->plane;
5657         int num_connectors = 0;
5658         intel_clock_t clock, reduced_clock;
5659         u32 dpll = 0, fp = 0, fp2 = 0;
5660         bool ok, has_reduced_clock = false;
5661         bool is_lvds = false;
5662         struct intel_encoder *encoder;
5663         struct intel_shared_dpll *pll;
5664         int ret;
5665
5666         for_each_encoder_on_crtc(dev, crtc, encoder) {
5667                 switch (encoder->type) {
5668                 case INTEL_OUTPUT_LVDS:
5669                         is_lvds = true;
5670                         break;
5671                 }
5672
5673                 num_connectors++;
5674         }
5675
5676         WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
5677              "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
5678
5679         ok = ironlake_compute_clocks(crtc, &clock,
5680                                      &has_reduced_clock, &reduced_clock);
5681         if (!ok && !intel_crtc->config.clock_set) {
5682                 DRM_ERROR("Couldn't find PLL settings for mode!\n");
5683                 return -EINVAL;
5684         }
5685         /* Compat-code for transition, will disappear. */
5686         if (!intel_crtc->config.clock_set) {
5687                 intel_crtc->config.dpll.n = clock.n;
5688                 intel_crtc->config.dpll.m1 = clock.m1;
5689                 intel_crtc->config.dpll.m2 = clock.m2;
5690                 intel_crtc->config.dpll.p1 = clock.p1;
5691                 intel_crtc->config.dpll.p2 = clock.p2;
5692         }
5693
5694         /* Ensure that the cursor is valid for the new mode before changing... */
5695         intel_crtc_update_cursor(crtc, true);
5696
5697         /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
5698         if (intel_crtc->config.has_pch_encoder) {
5699                 fp = i9xx_dpll_compute_fp(&intel_crtc->config.dpll);
5700                 if (has_reduced_clock)
5701                         fp2 = i9xx_dpll_compute_fp(&reduced_clock);
5702
5703                 dpll = ironlake_compute_dpll(intel_crtc,
5704                                              &fp, &reduced_clock,
5705                                              has_reduced_clock ? &fp2 : NULL);
5706
5707                 intel_crtc->config.dpll_hw_state.dpll = dpll;
5708                 intel_crtc->config.dpll_hw_state.fp0 = fp;
5709                 if (has_reduced_clock)
5710                         intel_crtc->config.dpll_hw_state.fp1 = fp2;
5711                 else
5712                         intel_crtc->config.dpll_hw_state.fp1 = fp;
5713
5714                 pll = intel_get_shared_dpll(intel_crtc, dpll, fp);
5715                 if (pll == NULL) {
5716                         DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n",
5717                                          pipe_name(pipe));
5718                         return -EINVAL;
5719                 }
5720         } else
5721                 intel_put_shared_dpll(intel_crtc);
5722
5723         if (intel_crtc->config.has_dp_encoder)
5724                 intel_dp_set_m_n(intel_crtc);
5725
5726         for_each_encoder_on_crtc(dev, crtc, encoder)
5727                 if (encoder->pre_pll_enable)
5728                         encoder->pre_pll_enable(encoder);
5729
5730         if (is_lvds && has_reduced_clock && i915_powersave)
5731                 intel_crtc->lowfreq_avail = true;
5732         else
5733                 intel_crtc->lowfreq_avail = false;
5734
5735         if (intel_crtc->config.has_pch_encoder) {
5736                 pll = intel_crtc_to_shared_dpll(intel_crtc);
5737
5738                 I915_WRITE(PCH_DPLL(pll->id), dpll);
5739
5740                 /* Wait for the clocks to stabilize. */
5741                 POSTING_READ(PCH_DPLL(pll->id));
5742                 udelay(150);
5743
5744                 /* The pixel multiplier can only be updated once the
5745                  * DPLL is enabled and the clocks are stable.
5746                  *
5747                  * So write it again.
5748                  */
5749                 I915_WRITE(PCH_DPLL(pll->id), dpll);
5750
5751                 if (has_reduced_clock)
5752                         I915_WRITE(PCH_FP1(pll->id), fp2);
5753                 else
5754                         I915_WRITE(PCH_FP1(pll->id), fp);
5755         }
5756
5757         intel_set_pipe_timings(intel_crtc);
5758
5759         if (intel_crtc->config.has_pch_encoder) {
5760                 intel_cpu_transcoder_set_m_n(intel_crtc,
5761                                              &intel_crtc->config.fdi_m_n);
5762         }
5763
5764         if (IS_IVYBRIDGE(dev))
5765                 ivybridge_update_fdi_bc_bifurcation(intel_crtc);
5766
5767         ironlake_set_pipeconf(crtc);
5768
5769         /* Set up the display plane register */
5770         I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE);
5771         POSTING_READ(DSPCNTR(plane));
5772
5773         ret = intel_pipe_set_base(crtc, x, y, fb);
5774
5775         intel_update_watermarks(dev);
5776
5777         return ret;
5778 }
5779
5780 static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
5781                                         struct intel_crtc_config *pipe_config)
5782 {
5783         struct drm_device *dev = crtc->base.dev;
5784         struct drm_i915_private *dev_priv = dev->dev_private;
5785         enum transcoder transcoder = pipe_config->cpu_transcoder;
5786
5787         pipe_config->fdi_m_n.link_m = I915_READ(PIPE_LINK_M1(transcoder));
5788         pipe_config->fdi_m_n.link_n = I915_READ(PIPE_LINK_N1(transcoder));
5789         pipe_config->fdi_m_n.gmch_m = I915_READ(PIPE_DATA_M1(transcoder))
5790                                         & ~TU_SIZE_MASK;
5791         pipe_config->fdi_m_n.gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
5792         pipe_config->fdi_m_n.tu = ((I915_READ(PIPE_DATA_M1(transcoder))
5793                                    & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
5794 }
5795
5796 static void ironlake_get_pfit_config(struct intel_crtc *crtc,
5797                                      struct intel_crtc_config *pipe_config)
5798 {
5799         struct drm_device *dev = crtc->base.dev;
5800         struct drm_i915_private *dev_priv = dev->dev_private;
5801         uint32_t tmp;
5802
5803         tmp = I915_READ(PF_CTL(crtc->pipe));
5804
5805         if (tmp & PF_ENABLE) {
5806                 pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
5807                 pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
5808
5809                 /* We currently do not free assignements of panel fitters on
5810                  * ivb/hsw (since we don't use the higher upscaling modes which
5811                  * differentiates them) so just WARN about this case for now. */
5812                 if (IS_GEN7(dev)) {
5813                         WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
5814                                 PF_PIPE_SEL_IVB(crtc->pipe));
5815                 }
5816         }
5817 }
5818
5819 static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
5820                                      struct intel_crtc_config *pipe_config)
5821 {
5822         struct drm_device *dev = crtc->base.dev;
5823         struct drm_i915_private *dev_priv = dev->dev_private;
5824         uint32_t tmp;
5825
5826         pipe_config->cpu_transcoder = crtc->pipe;
5827         pipe_config->shared_dpll = DPLL_ID_PRIVATE;
5828
5829         tmp = I915_READ(PIPECONF(crtc->pipe));
5830         if (!(tmp & PIPECONF_ENABLE))
5831                 return false;
5832
5833         if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
5834                 struct intel_shared_dpll *pll;
5835
5836                 pipe_config->has_pch_encoder = true;
5837
5838                 tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
5839                 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
5840                                           FDI_DP_PORT_WIDTH_SHIFT) + 1;
5841
5842                 ironlake_get_fdi_m_n_config(crtc, pipe_config);
5843
5844                 /* XXX: Can't properly read out the pch dpll pixel multiplier
5845                  * since we don't have state tracking for pch clocks yet. */
5846                 pipe_config->pixel_multiplier = 1;
5847
5848                 if (HAS_PCH_IBX(dev_priv->dev)) {
5849                         pipe_config->shared_dpll = crtc->pipe;
5850                 } else {
5851                         tmp = I915_READ(PCH_DPLL_SEL);
5852                         if (tmp & TRANS_DPLLB_SEL(crtc->pipe))
5853                                 pipe_config->shared_dpll = DPLL_ID_PCH_PLL_B;
5854                         else
5855                                 pipe_config->shared_dpll = DPLL_ID_PCH_PLL_A;
5856                 }
5857
5858                 pll = &dev_priv->shared_dplls[pipe_config->shared_dpll];
5859
5860                 WARN_ON(!pll->get_hw_state(dev_priv, pll,
5861                                            &pipe_config->dpll_hw_state));
5862         } else {
5863                 pipe_config->pixel_multiplier = 1;
5864         }
5865
5866         intel_get_pipe_timings(crtc, pipe_config);
5867
5868         ironlake_get_pfit_config(crtc, pipe_config);
5869
5870         return true;
5871 }
5872
5873 static void haswell_modeset_global_resources(struct drm_device *dev)
5874 {
5875         bool enable = false;
5876         struct intel_crtc *crtc;
5877
5878         list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
5879                 if (!crtc->base.enabled)
5880                         continue;
5881
5882                 if (crtc->pipe != PIPE_A || crtc->config.pch_pfit.size ||
5883                     crtc->config.cpu_transcoder != TRANSCODER_EDP)
5884                         enable = true;
5885         }
5886
5887         intel_set_power_well(dev, enable);
5888 }
5889
5890 static int haswell_crtc_mode_set(struct drm_crtc *crtc,
5891                                  int x, int y,
5892                                  struct drm_framebuffer *fb)
5893 {
5894         struct drm_device *dev = crtc->dev;
5895         struct drm_i915_private *dev_priv = dev->dev_private;
5896         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5897         int plane = intel_crtc->plane;
5898         int ret;
5899
5900         if (!intel_ddi_pll_mode_set(crtc))
5901                 return -EINVAL;
5902
5903         /* Ensure that the cursor is valid for the new mode before changing... */
5904         intel_crtc_update_cursor(crtc, true);
5905
5906         if (intel_crtc->config.has_dp_encoder)
5907                 intel_dp_set_m_n(intel_crtc);
5908
5909         intel_crtc->lowfreq_avail = false;
5910
5911         intel_set_pipe_timings(intel_crtc);
5912
5913         if (intel_crtc->config.has_pch_encoder) {
5914                 intel_cpu_transcoder_set_m_n(intel_crtc,
5915                                              &intel_crtc->config.fdi_m_n);
5916         }
5917
5918         haswell_set_pipeconf(crtc);
5919
5920         intel_set_pipe_csc(crtc);
5921
5922         /* Set up the display plane register */
5923         I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE | DISPPLANE_PIPE_CSC_ENABLE);
5924         POSTING_READ(DSPCNTR(plane));
5925
5926         ret = intel_pipe_set_base(crtc, x, y, fb);
5927
5928         intel_update_watermarks(dev);
5929
5930         return ret;
5931 }
5932
5933 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
5934                                     struct intel_crtc_config *pipe_config)
5935 {
5936         struct drm_device *dev = crtc->base.dev;
5937         struct drm_i915_private *dev_priv = dev->dev_private;
5938         enum intel_display_power_domain pfit_domain;
5939         uint32_t tmp;
5940
5941         pipe_config->cpu_transcoder = crtc->pipe;
5942         pipe_config->shared_dpll = DPLL_ID_PRIVATE;
5943
5944         tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
5945         if (tmp & TRANS_DDI_FUNC_ENABLE) {
5946                 enum pipe trans_edp_pipe;
5947                 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
5948                 default:
5949                         WARN(1, "unknown pipe linked to edp transcoder\n");
5950                 case TRANS_DDI_EDP_INPUT_A_ONOFF:
5951                 case TRANS_DDI_EDP_INPUT_A_ON:
5952                         trans_edp_pipe = PIPE_A;
5953                         break;
5954                 case TRANS_DDI_EDP_INPUT_B_ONOFF:
5955                         trans_edp_pipe = PIPE_B;
5956                         break;
5957                 case TRANS_DDI_EDP_INPUT_C_ONOFF:
5958                         trans_edp_pipe = PIPE_C;
5959                         break;
5960                 }
5961
5962                 if (trans_edp_pipe == crtc->pipe)
5963                         pipe_config->cpu_transcoder = TRANSCODER_EDP;
5964         }
5965
5966         if (!intel_display_power_enabled(dev,
5967                         POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder)))
5968                 return false;
5969
5970         tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
5971         if (!(tmp & PIPECONF_ENABLE))
5972                 return false;
5973
5974         /*
5975          * Haswell has only FDI/PCH transcoder A. It is which is connected to
5976          * DDI E. So just check whether this pipe is wired to DDI E and whether
5977          * the PCH transcoder is on.
5978          */
5979         tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
5980         if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) &&
5981             I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
5982                 pipe_config->has_pch_encoder = true;
5983
5984                 tmp = I915_READ(FDI_RX_CTL(PIPE_A));
5985                 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
5986                                           FDI_DP_PORT_WIDTH_SHIFT) + 1;
5987
5988                 ironlake_get_fdi_m_n_config(crtc, pipe_config);
5989         }
5990
5991         intel_get_pipe_timings(crtc, pipe_config);
5992
5993         pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
5994         if (intel_display_power_enabled(dev, pfit_domain))
5995                 ironlake_get_pfit_config(crtc, pipe_config);
5996
5997         pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
5998                                    (I915_READ(IPS_CTL) & IPS_ENABLE);
5999
6000         pipe_config->pixel_multiplier = 1;
6001
6002         return true;
6003 }
6004
6005 static int intel_crtc_mode_set(struct drm_crtc *crtc,
6006                                int x, int y,
6007                                struct drm_framebuffer *fb)
6008 {
6009         struct drm_device *dev = crtc->dev;
6010         struct drm_i915_private *dev_priv = dev->dev_private;
6011         struct drm_encoder_helper_funcs *encoder_funcs;
6012         struct intel_encoder *encoder;
6013         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6014         struct drm_display_mode *adjusted_mode =
6015                 &intel_crtc->config.adjusted_mode;
6016         struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
6017         int pipe = intel_crtc->pipe;
6018         int ret;
6019
6020         drm_vblank_pre_modeset(dev, pipe);
6021
6022         ret = dev_priv->display.crtc_mode_set(crtc, x, y, fb);
6023
6024         drm_vblank_post_modeset(dev, pipe);
6025
6026         if (ret != 0)
6027                 return ret;
6028
6029         for_each_encoder_on_crtc(dev, crtc, encoder) {
6030                 DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
6031                         encoder->base.base.id,
6032                         drm_get_encoder_name(&encoder->base),
6033                         mode->base.id, mode->name);
6034                 if (encoder->mode_set) {
6035                         encoder->mode_set(encoder);
6036                 } else {
6037                         encoder_funcs = encoder->base.helper_private;
6038                         encoder_funcs->mode_set(&encoder->base, mode, adjusted_mode);
6039                 }
6040         }
6041
6042         return 0;
6043 }
6044
6045 static bool intel_eld_uptodate(struct drm_connector *connector,
6046                                int reg_eldv, uint32_t bits_eldv,
6047                                int reg_elda, uint32_t bits_elda,
6048                                int reg_edid)
6049 {
6050         struct drm_i915_private *dev_priv = connector->dev->dev_private;
6051         uint8_t *eld = connector->eld;
6052         uint32_t i;
6053
6054         i = I915_READ(reg_eldv);
6055         i &= bits_eldv;
6056
6057         if (!eld[0])
6058                 return !i;
6059
6060         if (!i)
6061                 return false;
6062
6063         i = I915_READ(reg_elda);
6064         i &= ~bits_elda;
6065         I915_WRITE(reg_elda, i);
6066
6067         for (i = 0; i < eld[2]; i++)
6068                 if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
6069                         return false;
6070
6071         return true;
6072 }
6073
6074 static void g4x_write_eld(struct drm_connector *connector,
6075                           struct drm_crtc *crtc)
6076 {
6077         struct drm_i915_private *dev_priv = connector->dev->dev_private;
6078         uint8_t *eld = connector->eld;
6079         uint32_t eldv;
6080         uint32_t len;
6081         uint32_t i;
6082
6083         i = I915_READ(G4X_AUD_VID_DID);
6084
6085         if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
6086                 eldv = G4X_ELDV_DEVCL_DEVBLC;
6087         else
6088                 eldv = G4X_ELDV_DEVCTG;
6089
6090         if (intel_eld_uptodate(connector,
6091                                G4X_AUD_CNTL_ST, eldv,
6092                                G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
6093                                G4X_HDMIW_HDMIEDID))
6094                 return;
6095
6096         i = I915_READ(G4X_AUD_CNTL_ST);
6097         i &= ~(eldv | G4X_ELD_ADDR);
6098         len = (i >> 9) & 0x1f;          /* ELD buffer size */
6099         I915_WRITE(G4X_AUD_CNTL_ST, i);
6100
6101         if (!eld[0])
6102                 return;
6103
6104         len = min_t(uint8_t, eld[2], len);
6105         DRM_DEBUG_DRIVER("ELD size %d\n", len);
6106         for (i = 0; i < len; i++)
6107                 I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
6108
6109         i = I915_READ(G4X_AUD_CNTL_ST);
6110         i |= eldv;
6111         I915_WRITE(G4X_AUD_CNTL_ST, i);
6112 }
6113
6114 static void haswell_write_eld(struct drm_connector *connector,
6115                                      struct drm_crtc *crtc)
6116 {
6117         struct drm_i915_private *dev_priv = connector->dev->dev_private;
6118         uint8_t *eld = connector->eld;
6119         struct drm_device *dev = crtc->dev;
6120         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6121         uint32_t eldv;
6122         uint32_t i;
6123         int len;
6124         int pipe = to_intel_crtc(crtc)->pipe;
6125         int tmp;
6126
6127         int hdmiw_hdmiedid = HSW_AUD_EDID_DATA(pipe);
6128         int aud_cntl_st = HSW_AUD_DIP_ELD_CTRL(pipe);
6129         int aud_config = HSW_AUD_CFG(pipe);
6130         int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD;
6131
6132
6133         DRM_DEBUG_DRIVER("HDMI: Haswell Audio initialize....\n");
6134
6135         /* Audio output enable */
6136         DRM_DEBUG_DRIVER("HDMI audio: enable codec\n");
6137         tmp = I915_READ(aud_cntrl_st2);
6138         tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4));
6139         I915_WRITE(aud_cntrl_st2, tmp);
6140
6141         /* Wait for 1 vertical blank */
6142         intel_wait_for_vblank(dev, pipe);
6143
6144         /* Set ELD valid state */
6145         tmp = I915_READ(aud_cntrl_st2);
6146         DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%8x\n", tmp);
6147         tmp |= (AUDIO_ELD_VALID_A << (pipe * 4));
6148         I915_WRITE(aud_cntrl_st2, tmp);
6149         tmp = I915_READ(aud_cntrl_st2);
6150         DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%8x\n", tmp);
6151
6152         /* Enable HDMI mode */
6153         tmp = I915_READ(aud_config);
6154         DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%8x\n", tmp);
6155         /* clear N_programing_enable and N_value_index */
6156         tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE);
6157         I915_WRITE(aud_config, tmp);
6158
6159         DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
6160
6161         eldv = AUDIO_ELD_VALID_A << (pipe * 4);
6162         intel_crtc->eld_vld = true;
6163
6164         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
6165                 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
6166                 eld[5] |= (1 << 2);     /* Conn_Type, 0x1 = DisplayPort */
6167                 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
6168         } else
6169                 I915_WRITE(aud_config, 0);
6170
6171         if (intel_eld_uptodate(connector,
6172                                aud_cntrl_st2, eldv,
6173                                aud_cntl_st, IBX_ELD_ADDRESS,
6174                                hdmiw_hdmiedid))
6175                 return;
6176
6177         i = I915_READ(aud_cntrl_st2);
6178         i &= ~eldv;
6179         I915_WRITE(aud_cntrl_st2, i);
6180
6181         if (!eld[0])
6182                 return;
6183
6184         i = I915_READ(aud_cntl_st);
6185         i &= ~IBX_ELD_ADDRESS;
6186         I915_WRITE(aud_cntl_st, i);
6187         i = (i >> 29) & DIP_PORT_SEL_MASK;              /* DIP_Port_Select, 0x1 = PortB */
6188         DRM_DEBUG_DRIVER("port num:%d\n", i);
6189
6190         len = min_t(uint8_t, eld[2], 21);       /* 84 bytes of hw ELD buffer */
6191         DRM_DEBUG_DRIVER("ELD size %d\n", len);
6192         for (i = 0; i < len; i++)
6193                 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
6194
6195         i = I915_READ(aud_cntrl_st2);
6196         i |= eldv;
6197         I915_WRITE(aud_cntrl_st2, i);
6198
6199 }
6200
6201 static void ironlake_write_eld(struct drm_connector *connector,
6202                                      struct drm_crtc *crtc)
6203 {
6204         struct drm_i915_private *dev_priv = connector->dev->dev_private;
6205         uint8_t *eld = connector->eld;
6206         uint32_t eldv;
6207         uint32_t i;
6208         int len;
6209         int hdmiw_hdmiedid;
6210         int aud_config;
6211         int aud_cntl_st;
6212         int aud_cntrl_st2;
6213         int pipe = to_intel_crtc(crtc)->pipe;
6214
6215         if (HAS_PCH_IBX(connector->dev)) {
6216                 hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe);
6217                 aud_config = IBX_AUD_CFG(pipe);
6218                 aud_cntl_st = IBX_AUD_CNTL_ST(pipe);
6219                 aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
6220         } else {
6221                 hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID(pipe);
6222                 aud_config = CPT_AUD_CFG(pipe);
6223                 aud_cntl_st = CPT_AUD_CNTL_ST(pipe);
6224                 aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
6225         }
6226
6227         DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
6228
6229         i = I915_READ(aud_cntl_st);
6230         i = (i >> 29) & DIP_PORT_SEL_MASK;              /* DIP_Port_Select, 0x1 = PortB */
6231         if (!i) {
6232                 DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
6233                 /* operate blindly on all ports */
6234                 eldv = IBX_ELD_VALIDB;
6235                 eldv |= IBX_ELD_VALIDB << 4;
6236                 eldv |= IBX_ELD_VALIDB << 8;
6237         } else {
6238                 DRM_DEBUG_DRIVER("ELD on port %c\n", port_name(i));
6239                 eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
6240         }
6241
6242         if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
6243                 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
6244                 eld[5] |= (1 << 2);     /* Conn_Type, 0x1 = DisplayPort */
6245                 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
6246         } else
6247                 I915_WRITE(aud_config, 0);
6248
6249         if (intel_eld_uptodate(connector,
6250                                aud_cntrl_st2, eldv,
6251                                aud_cntl_st, IBX_ELD_ADDRESS,
6252                                hdmiw_hdmiedid))
6253                 return;
6254
6255         i = I915_READ(aud_cntrl_st2);
6256         i &= ~eldv;
6257         I915_WRITE(aud_cntrl_st2, i);
6258
6259         if (!eld[0])
6260                 return;
6261
6262         i = I915_READ(aud_cntl_st);
6263         i &= ~IBX_ELD_ADDRESS;
6264         I915_WRITE(aud_cntl_st, i);
6265
6266         len = min_t(uint8_t, eld[2], 21);       /* 84 bytes of hw ELD buffer */
6267         DRM_DEBUG_DRIVER("ELD size %d\n", len);
6268         for (i = 0; i < len; i++)
6269                 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
6270
6271         i = I915_READ(aud_cntrl_st2);
6272         i |= eldv;
6273         I915_WRITE(aud_cntrl_st2, i);
6274 }
6275
6276 void intel_write_eld(struct drm_encoder *encoder,
6277                      struct drm_display_mode *mode)
6278 {
6279         struct drm_crtc *crtc = encoder->crtc;
6280         struct drm_connector *connector;
6281         struct drm_device *dev = encoder->dev;
6282         struct drm_i915_private *dev_priv = dev->dev_private;
6283
6284         connector = drm_select_eld(encoder, mode);
6285         if (!connector)
6286                 return;
6287
6288         DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6289                          connector->base.id,
6290                          drm_get_connector_name(connector),
6291                          connector->encoder->base.id,
6292                          drm_get_encoder_name(connector->encoder));
6293
6294         connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
6295
6296         if (dev_priv->display.write_eld)
6297                 dev_priv->display.write_eld(connector, crtc);
6298 }
6299
6300 /** Loads the palette/gamma unit for the CRTC with the prepared values */
6301 void intel_crtc_load_lut(struct drm_crtc *crtc)
6302 {
6303         struct drm_device *dev = crtc->dev;
6304         struct drm_i915_private *dev_priv = dev->dev_private;
6305         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6306         enum pipe pipe = intel_crtc->pipe;
6307         int palreg = PALETTE(pipe);
6308         int i;
6309         bool reenable_ips = false;
6310
6311         /* The clocks have to be on to load the palette. */
6312         if (!crtc->enabled || !intel_crtc->active)
6313                 return;
6314
6315         if (!HAS_PCH_SPLIT(dev_priv->dev))
6316                 assert_pll_enabled(dev_priv, pipe);
6317
6318         /* use legacy palette for Ironlake */
6319         if (HAS_PCH_SPLIT(dev))
6320                 palreg = LGC_PALETTE(pipe);
6321
6322         /* Workaround : Do not read or write the pipe palette/gamma data while
6323          * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled.
6324          */
6325         if (intel_crtc->config.ips_enabled &&
6326             ((I915_READ(GAMMA_MODE(pipe)) & GAMMA_MODE_MODE_MASK) ==
6327              GAMMA_MODE_MODE_SPLIT)) {
6328                 hsw_disable_ips(intel_crtc);
6329                 reenable_ips = true;
6330         }
6331
6332         for (i = 0; i < 256; i++) {
6333                 I915_WRITE(palreg + 4 * i,
6334                            (intel_crtc->lut_r[i] << 16) |
6335                            (intel_crtc->lut_g[i] << 8) |
6336                            intel_crtc->lut_b[i]);
6337         }
6338
6339         if (reenable_ips)
6340                 hsw_enable_ips(intel_crtc);
6341 }
6342
6343 static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
6344 {
6345         struct drm_device *dev = crtc->dev;
6346         struct drm_i915_private *dev_priv = dev->dev_private;
6347         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6348         bool visible = base != 0;
6349         u32 cntl;
6350
6351         if (intel_crtc->cursor_visible == visible)
6352                 return;
6353
6354         cntl = I915_READ(_CURACNTR);
6355         if (visible) {
6356                 /* On these chipsets we can only modify the base whilst
6357                  * the cursor is disabled.
6358                  */
6359                 I915_WRITE(_CURABASE, base);
6360
6361                 cntl &= ~(CURSOR_FORMAT_MASK);
6362                 /* XXX width must be 64, stride 256 => 0x00 << 28 */
6363                 cntl |= CURSOR_ENABLE |
6364                         CURSOR_GAMMA_ENABLE |
6365                         CURSOR_FORMAT_ARGB;
6366         } else
6367                 cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
6368         I915_WRITE(_CURACNTR, cntl);
6369
6370         intel_crtc->cursor_visible = visible;
6371 }
6372
6373 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
6374 {
6375         struct drm_device *dev = crtc->dev;
6376         struct drm_i915_private *dev_priv = dev->dev_private;
6377         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6378         int pipe = intel_crtc->pipe;
6379         bool visible = base != 0;
6380
6381         if (intel_crtc->cursor_visible != visible) {
6382                 uint32_t cntl = I915_READ(CURCNTR(pipe));
6383                 if (base) {
6384                         cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
6385                         cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
6386                         cntl |= pipe << 28; /* Connect to correct pipe */
6387                 } else {
6388                         cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
6389                         cntl |= CURSOR_MODE_DISABLE;
6390                 }
6391                 I915_WRITE(CURCNTR(pipe), cntl);
6392
6393                 intel_crtc->cursor_visible = visible;
6394         }
6395         /* and commit changes on next vblank */
6396         I915_WRITE(CURBASE(pipe), base);
6397 }
6398
6399 static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
6400 {
6401         struct drm_device *dev = crtc->dev;
6402         struct drm_i915_private *dev_priv = dev->dev_private;
6403         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6404         int pipe = intel_crtc->pipe;
6405         bool visible = base != 0;
6406
6407         if (intel_crtc->cursor_visible != visible) {
6408                 uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
6409                 if (base) {
6410                         cntl &= ~CURSOR_MODE;
6411                         cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
6412                 } else {
6413                         cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
6414                         cntl |= CURSOR_MODE_DISABLE;
6415                 }
6416                 if (IS_HASWELL(dev))
6417                         cntl |= CURSOR_PIPE_CSC_ENABLE;
6418                 I915_WRITE(CURCNTR_IVB(pipe), cntl);
6419
6420                 intel_crtc->cursor_visible = visible;
6421         }
6422         /* and commit changes on next vblank */
6423         I915_WRITE(CURBASE_IVB(pipe), base);
6424 }
6425
6426 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
6427 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
6428                                      bool on)
6429 {
6430         struct drm_device *dev = crtc->dev;
6431         struct drm_i915_private *dev_priv = dev->dev_private;
6432         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6433         int pipe = intel_crtc->pipe;
6434         int x = intel_crtc->cursor_x;
6435         int y = intel_crtc->cursor_y;
6436         u32 base, pos;
6437         bool visible;
6438
6439         pos = 0;
6440
6441         if (on && crtc->enabled && crtc->fb) {
6442                 base = intel_crtc->cursor_addr;
6443                 if (x > (int) crtc->fb->width)
6444                         base = 0;
6445
6446                 if (y > (int) crtc->fb->height)
6447                         base = 0;
6448         } else
6449                 base = 0;
6450
6451         if (x < 0) {
6452                 if (x + intel_crtc->cursor_width < 0)
6453                         base = 0;
6454
6455                 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
6456                 x = -x;
6457         }
6458         pos |= x << CURSOR_X_SHIFT;
6459
6460         if (y < 0) {
6461                 if (y + intel_crtc->cursor_height < 0)
6462                         base = 0;
6463
6464                 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
6465                 y = -y;
6466         }
6467         pos |= y << CURSOR_Y_SHIFT;
6468
6469         visible = base != 0;
6470         if (!visible && !intel_crtc->cursor_visible)
6471                 return;
6472
6473         if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
6474                 I915_WRITE(CURPOS_IVB(pipe), pos);
6475                 ivb_update_cursor(crtc, base);
6476         } else {
6477                 I915_WRITE(CURPOS(pipe), pos);
6478                 if (IS_845G(dev) || IS_I865G(dev))
6479                         i845_update_cursor(crtc, base);
6480                 else
6481                         i9xx_update_cursor(crtc, base);
6482         }
6483 }
6484
6485 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
6486                                  struct drm_file *file,
6487                                  uint32_t handle,
6488                                  uint32_t width, uint32_t height)
6489 {
6490         struct drm_device *dev = crtc->dev;
6491         struct drm_i915_private *dev_priv = dev->dev_private;
6492         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6493         struct drm_i915_gem_object *obj;
6494         uint32_t addr;
6495         int ret;
6496
6497         /* if we want to turn off the cursor ignore width and height */
6498         if (!handle) {
6499                 DRM_DEBUG_KMS("cursor off\n");
6500                 addr = 0;
6501                 obj = NULL;
6502                 mutex_lock(&dev->struct_mutex);
6503                 goto finish;
6504         }
6505
6506         /* Currently we only support 64x64 cursors */
6507         if (width != 64 || height != 64) {
6508                 DRM_ERROR("we currently only support 64x64 cursors\n");
6509                 return -EINVAL;
6510         }
6511
6512         obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
6513         if (&obj->base == NULL)
6514                 return -ENOENT;
6515
6516         if (obj->base.size < width * height * 4) {
6517                 DRM_ERROR("buffer is to small\n");
6518                 ret = -ENOMEM;
6519                 goto fail;
6520         }
6521
6522         /* we only need to pin inside GTT if cursor is non-phy */
6523         mutex_lock(&dev->struct_mutex);
6524         if (!dev_priv->info->cursor_needs_physical) {
6525                 unsigned alignment;
6526
6527                 if (obj->tiling_mode) {
6528                         DRM_ERROR("cursor cannot be tiled\n");
6529                         ret = -EINVAL;
6530                         goto fail_locked;
6531                 }
6532
6533                 /* Note that the w/a also requires 2 PTE of padding following
6534                  * the bo. We currently fill all unused PTE with the shadow
6535                  * page and so we should always have valid PTE following the
6536                  * cursor preventing the VT-d warning.
6537                  */
6538                 alignment = 0;
6539                 if (need_vtd_wa(dev))
6540                         alignment = 64*1024;
6541
6542                 ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL);
6543                 if (ret) {
6544                         DRM_ERROR("failed to move cursor bo into the GTT\n");
6545                         goto fail_locked;
6546                 }
6547
6548                 ret = i915_gem_object_put_fence(obj);
6549                 if (ret) {
6550                         DRM_ERROR("failed to release fence for cursor");
6551                         goto fail_unpin;
6552                 }
6553
6554                 addr = obj->gtt_offset;
6555         } else {
6556                 int align = IS_I830(dev) ? 16 * 1024 : 256;
6557                 ret = i915_gem_attach_phys_object(dev, obj,
6558                                                   (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
6559                                                   align);
6560                 if (ret) {
6561                         DRM_ERROR("failed to attach phys object\n");
6562                         goto fail_locked;
6563                 }
6564                 addr = obj->phys_obj->handle->busaddr;
6565         }
6566
6567         if (IS_GEN2(dev))
6568                 I915_WRITE(CURSIZE, (height << 12) | width);
6569
6570  finish:
6571         if (intel_crtc->cursor_bo) {
6572                 if (dev_priv->info->cursor_needs_physical) {
6573                         if (intel_crtc->cursor_bo != obj)
6574                                 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
6575                 } else
6576                         i915_gem_object_unpin(intel_crtc->cursor_bo);
6577                 drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
6578         }
6579
6580         mutex_unlock(&dev->struct_mutex);
6581
6582         intel_crtc->cursor_addr = addr;
6583         intel_crtc->cursor_bo = obj;
6584         intel_crtc->cursor_width = width;
6585         intel_crtc->cursor_height = height;
6586
6587         intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
6588
6589         return 0;
6590 fail_unpin:
6591         i915_gem_object_unpin(obj);
6592 fail_locked:
6593         mutex_unlock(&dev->struct_mutex);
6594 fail:
6595         drm_gem_object_unreference_unlocked(&obj->base);
6596         return ret;
6597 }
6598
6599 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
6600 {
6601         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6602
6603         intel_crtc->cursor_x = x;
6604         intel_crtc->cursor_y = y;
6605
6606         intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
6607
6608         return 0;
6609 }
6610
6611 /** Sets the color ramps on behalf of RandR */
6612 void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
6613                                  u16 blue, int regno)
6614 {
6615         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6616
6617         intel_crtc->lut_r[regno] = red >> 8;
6618         intel_crtc->lut_g[regno] = green >> 8;
6619         intel_crtc->lut_b[regno] = blue >> 8;
6620 }
6621
6622 void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
6623                              u16 *blue, int regno)
6624 {
6625         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6626
6627         *red = intel_crtc->lut_r[regno] << 8;
6628         *green = intel_crtc->lut_g[regno] << 8;
6629         *blue = intel_crtc->lut_b[regno] << 8;
6630 }
6631
6632 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
6633                                  u16 *blue, uint32_t start, uint32_t size)
6634 {
6635         int end = (start + size > 256) ? 256 : start + size, i;
6636         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6637
6638         for (i = start; i < end; i++) {
6639                 intel_crtc->lut_r[i] = red[i] >> 8;
6640                 intel_crtc->lut_g[i] = green[i] >> 8;
6641                 intel_crtc->lut_b[i] = blue[i] >> 8;
6642         }
6643
6644         intel_crtc_load_lut(crtc);
6645 }
6646
6647 /* VESA 640x480x72Hz mode to set on the pipe */
6648 static struct drm_display_mode load_detect_mode = {
6649         DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
6650                  704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
6651 };
6652
6653 static struct drm_framebuffer *
6654 intel_framebuffer_create(struct drm_device *dev,
6655                          struct drm_mode_fb_cmd2 *mode_cmd,
6656                          struct drm_i915_gem_object *obj)
6657 {
6658         struct intel_framebuffer *intel_fb;
6659         int ret;
6660
6661         intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
6662         if (!intel_fb) {
6663                 drm_gem_object_unreference_unlocked(&obj->base);
6664                 return ERR_PTR(-ENOMEM);
6665         }
6666
6667         ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
6668         if (ret) {
6669                 drm_gem_object_unreference_unlocked(&obj->base);
6670                 kfree(intel_fb);
6671                 return ERR_PTR(ret);
6672         }
6673
6674         return &intel_fb->base;
6675 }
6676
6677 static u32
6678 intel_framebuffer_pitch_for_width(int width, int bpp)
6679 {
6680         u32 pitch = DIV_ROUND_UP(width * bpp, 8);
6681         return ALIGN(pitch, 64);
6682 }
6683
6684 static u32
6685 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
6686 {
6687         u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
6688         return ALIGN(pitch * mode->vdisplay, PAGE_SIZE);
6689 }
6690
6691 static struct drm_framebuffer *
6692 intel_framebuffer_create_for_mode(struct drm_device *dev,
6693                                   struct drm_display_mode *mode,
6694                                   int depth, int bpp)
6695 {
6696         struct drm_i915_gem_object *obj;
6697         struct drm_mode_fb_cmd2 mode_cmd = { 0 };
6698
6699         obj = i915_gem_alloc_object(dev,
6700                                     intel_framebuffer_size_for_mode(mode, bpp));
6701         if (obj == NULL)
6702                 return ERR_PTR(-ENOMEM);
6703
6704         mode_cmd.width = mode->hdisplay;
6705         mode_cmd.height = mode->vdisplay;
6706         mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
6707                                                                 bpp);
6708         mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
6709
6710         return intel_framebuffer_create(dev, &mode_cmd, obj);
6711 }
6712
6713 static struct drm_framebuffer *
6714 mode_fits_in_fbdev(struct drm_device *dev,
6715                    struct drm_display_mode *mode)
6716 {
6717         struct drm_i915_private *dev_priv = dev->dev_private;
6718         struct drm_i915_gem_object *obj;
6719         struct drm_framebuffer *fb;
6720
6721         if (dev_priv->fbdev == NULL)
6722                 return NULL;
6723
6724         obj = dev_priv->fbdev->ifb.obj;
6725         if (obj == NULL)
6726                 return NULL;
6727
6728         fb = &dev_priv->fbdev->ifb.base;
6729         if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
6730                                                                fb->bits_per_pixel))
6731                 return NULL;
6732
6733         if (obj->base.size < mode->vdisplay * fb->pitches[0])
6734                 return NULL;
6735
6736         return fb;
6737 }
6738
6739 bool intel_get_load_detect_pipe(struct drm_connector *connector,
6740                                 struct drm_display_mode *mode,
6741                                 struct intel_load_detect_pipe *old)
6742 {
6743         struct intel_crtc *intel_crtc;
6744         struct intel_encoder *intel_encoder =
6745                 intel_attached_encoder(connector);
6746         struct drm_crtc *possible_crtc;
6747         struct drm_encoder *encoder = &intel_encoder->base;
6748         struct drm_crtc *crtc = NULL;
6749         struct drm_device *dev = encoder->dev;
6750         struct drm_framebuffer *fb;
6751         int i = -1;
6752
6753         DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6754                       connector->base.id, drm_get_connector_name(connector),
6755                       encoder->base.id, drm_get_encoder_name(encoder));
6756
6757         /*
6758          * Algorithm gets a little messy:
6759          *
6760          *   - if the connector already has an assigned crtc, use it (but make
6761          *     sure it's on first)
6762          *
6763          *   - try to find the first unused crtc that can drive this connector,
6764          *     and use that if we find one
6765          */
6766
6767         /* See if we already have a CRTC for this connector */
6768         if (encoder->crtc) {
6769                 crtc = encoder->crtc;
6770
6771                 mutex_lock(&crtc->mutex);
6772
6773                 old->dpms_mode = connector->dpms;
6774                 old->load_detect_temp = false;
6775
6776                 /* Make sure the crtc and connector are running */
6777                 if (connector->dpms != DRM_MODE_DPMS_ON)
6778                         connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
6779
6780                 return true;
6781         }
6782
6783         /* Find an unused one (if possible) */
6784         list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
6785                 i++;
6786                 if (!(encoder->possible_crtcs & (1 << i)))
6787                         continue;
6788                 if (!possible_crtc->enabled) {
6789                         crtc = possible_crtc;
6790                         break;
6791                 }
6792         }
6793
6794         /*
6795          * If we didn't find an unused CRTC, don't use any.
6796          */
6797         if (!crtc) {
6798                 DRM_DEBUG_KMS("no pipe available for load-detect\n");
6799                 return false;
6800         }
6801
6802         mutex_lock(&crtc->mutex);
6803         intel_encoder->new_crtc = to_intel_crtc(crtc);
6804         to_intel_connector(connector)->new_encoder = intel_encoder;
6805
6806         intel_crtc = to_intel_crtc(crtc);
6807         old->dpms_mode = connector->dpms;
6808         old->load_detect_temp = true;
6809         old->release_fb = NULL;
6810
6811         if (!mode)
6812                 mode = &load_detect_mode;
6813
6814         /* We need a framebuffer large enough to accommodate all accesses
6815          * that the plane may generate whilst we perform load detection.
6816          * We can not rely on the fbcon either being present (we get called
6817          * during its initialisation to detect all boot displays, or it may
6818          * not even exist) or that it is large enough to satisfy the
6819          * requested mode.
6820          */
6821         fb = mode_fits_in_fbdev(dev, mode);
6822         if (fb == NULL) {
6823                 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
6824                 fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
6825                 old->release_fb = fb;
6826         } else
6827                 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
6828         if (IS_ERR(fb)) {
6829                 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
6830                 mutex_unlock(&crtc->mutex);
6831                 return false;
6832         }
6833
6834         if (intel_set_mode(crtc, mode, 0, 0, fb)) {
6835                 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
6836                 if (old->release_fb)
6837                         old->release_fb->funcs->destroy(old->release_fb);
6838                 mutex_unlock(&crtc->mutex);
6839                 return false;
6840         }
6841
6842         /* let the connector get through one full cycle before testing */
6843         intel_wait_for_vblank(dev, intel_crtc->pipe);
6844         return true;
6845 }
6846
6847 void intel_release_load_detect_pipe(struct drm_connector *connector,
6848                                     struct intel_load_detect_pipe *old)
6849 {
6850         struct intel_encoder *intel_encoder =
6851                 intel_attached_encoder(connector);
6852         struct drm_encoder *encoder = &intel_encoder->base;
6853         struct drm_crtc *crtc = encoder->crtc;
6854
6855         DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
6856                       connector->base.id, drm_get_connector_name(connector),
6857                       encoder->base.id, drm_get_encoder_name(encoder));
6858
6859         if (old->load_detect_temp) {
6860                 to_intel_connector(connector)->new_encoder = NULL;
6861                 intel_encoder->new_crtc = NULL;
6862                 intel_set_mode(crtc, NULL, 0, 0, NULL);
6863
6864                 if (old->release_fb) {
6865                         drm_framebuffer_unregister_private(old->release_fb);
6866                         drm_framebuffer_unreference(old->release_fb);
6867                 }
6868
6869                 mutex_unlock(&crtc->mutex);
6870                 return;
6871         }
6872
6873         /* Switch crtc and encoder back off if necessary */
6874         if (old->dpms_mode != DRM_MODE_DPMS_ON)
6875                 connector->funcs->dpms(connector, old->dpms_mode);
6876
6877         mutex_unlock(&crtc->mutex);
6878 }
6879
6880 /* Returns the clock of the currently programmed mode of the given pipe. */
6881 static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
6882 {
6883         struct drm_i915_private *dev_priv = dev->dev_private;
6884         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6885         int pipe = intel_crtc->pipe;
6886         u32 dpll = I915_READ(DPLL(pipe));
6887         u32 fp;
6888         intel_clock_t clock;
6889
6890         if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
6891                 fp = I915_READ(FP0(pipe));
6892         else
6893                 fp = I915_READ(FP1(pipe));
6894
6895         clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
6896         if (IS_PINEVIEW(dev)) {
6897                 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
6898                 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
6899         } else {
6900                 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
6901                 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
6902         }
6903
6904         if (!IS_GEN2(dev)) {
6905                 if (IS_PINEVIEW(dev))
6906                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
6907                                 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
6908                 else
6909                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
6910                                DPLL_FPA01_P1_POST_DIV_SHIFT);
6911
6912                 switch (dpll & DPLL_MODE_MASK) {
6913                 case DPLLB_MODE_DAC_SERIAL:
6914                         clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
6915                                 5 : 10;
6916                         break;
6917                 case DPLLB_MODE_LVDS:
6918                         clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
6919                                 7 : 14;
6920                         break;
6921                 default:
6922                         DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
6923                                   "mode\n", (int)(dpll & DPLL_MODE_MASK));
6924                         return 0;
6925                 }
6926
6927                 if (IS_PINEVIEW(dev))
6928                         pineview_clock(96000, &clock);
6929                 else
6930                         i9xx_clock(96000, &clock);
6931         } else {
6932                 bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
6933
6934                 if (is_lvds) {
6935                         clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
6936                                        DPLL_FPA01_P1_POST_DIV_SHIFT);
6937                         clock.p2 = 14;
6938
6939                         if ((dpll & PLL_REF_INPUT_MASK) ==
6940                             PLLB_REF_INPUT_SPREADSPECTRUMIN) {
6941                                 /* XXX: might not be 66MHz */
6942                                 i9xx_clock(66000, &clock);
6943                         } else
6944                                 i9xx_clock(48000, &clock);
6945                 } else {
6946                         if (dpll & PLL_P1_DIVIDE_BY_TWO)
6947                                 clock.p1 = 2;
6948                         else {
6949                                 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
6950                                             DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
6951                         }
6952                         if (dpll & PLL_P2_DIVIDE_BY_4)
6953                                 clock.p2 = 4;
6954                         else
6955                                 clock.p2 = 2;
6956
6957                         i9xx_clock(48000, &clock);
6958                 }
6959         }
6960
6961         /* XXX: It would be nice to validate the clocks, but we can't reuse
6962          * i830PllIsValid() because it relies on the xf86_config connector
6963          * configuration being accurate, which it isn't necessarily.
6964          */
6965
6966         return clock.dot;
6967 }
6968
6969 /** Returns the currently programmed mode of the given pipe. */
6970 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
6971                                              struct drm_crtc *crtc)
6972 {
6973         struct drm_i915_private *dev_priv = dev->dev_private;
6974         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6975         enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
6976         struct drm_display_mode *mode;
6977         int htot = I915_READ(HTOTAL(cpu_transcoder));
6978         int hsync = I915_READ(HSYNC(cpu_transcoder));
6979         int vtot = I915_READ(VTOTAL(cpu_transcoder));
6980         int vsync = I915_READ(VSYNC(cpu_transcoder));
6981
6982         mode = kzalloc(sizeof(*mode), GFP_KERNEL);
6983         if (!mode)
6984                 return NULL;
6985
6986         mode->clock = intel_crtc_clock_get(dev, crtc);
6987         mode->hdisplay = (htot & 0xffff) + 1;
6988         mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
6989         mode->hsync_start = (hsync & 0xffff) + 1;
6990         mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
6991         mode->vdisplay = (vtot & 0xffff) + 1;
6992         mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
6993         mode->vsync_start = (vsync & 0xffff) + 1;
6994         mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
6995
6996         drm_mode_set_name(mode);
6997
6998         return mode;
6999 }
7000
7001 static void intel_increase_pllclock(struct drm_crtc *crtc)
7002 {
7003         struct drm_device *dev = crtc->dev;
7004         drm_i915_private_t *dev_priv = dev->dev_private;
7005         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7006         int pipe = intel_crtc->pipe;
7007         int dpll_reg = DPLL(pipe);
7008         int dpll;
7009
7010         if (HAS_PCH_SPLIT(dev))
7011                 return;
7012
7013         if (!dev_priv->lvds_downclock_avail)
7014                 return;
7015
7016         dpll = I915_READ(dpll_reg);
7017         if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
7018                 DRM_DEBUG_DRIVER("upclocking LVDS\n");
7019
7020                 assert_panel_unlocked(dev_priv, pipe);
7021
7022                 dpll &= ~DISPLAY_RATE_SELECT_FPA1;
7023                 I915_WRITE(dpll_reg, dpll);
7024                 intel_wait_for_vblank(dev, pipe);
7025
7026                 dpll = I915_READ(dpll_reg);
7027                 if (dpll & DISPLAY_RATE_SELECT_FPA1)
7028                         DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
7029         }
7030 }
7031
7032 static void intel_decrease_pllclock(struct drm_crtc *crtc)
7033 {
7034         struct drm_device *dev = crtc->dev;
7035         drm_i915_private_t *dev_priv = dev->dev_private;
7036         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7037
7038         if (HAS_PCH_SPLIT(dev))
7039                 return;
7040
7041         if (!dev_priv->lvds_downclock_avail)
7042                 return;
7043
7044         /*
7045          * Since this is called by a timer, we should never get here in
7046          * the manual case.
7047          */
7048         if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
7049                 int pipe = intel_crtc->pipe;
7050                 int dpll_reg = DPLL(pipe);
7051                 int dpll;
7052
7053                 DRM_DEBUG_DRIVER("downclocking LVDS\n");
7054
7055                 assert_panel_unlocked(dev_priv, pipe);
7056
7057                 dpll = I915_READ(dpll_reg);
7058                 dpll |= DISPLAY_RATE_SELECT_FPA1;
7059                 I915_WRITE(dpll_reg, dpll);
7060                 intel_wait_for_vblank(dev, pipe);
7061                 dpll = I915_READ(dpll_reg);
7062                 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
7063                         DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
7064         }
7065
7066 }
7067
7068 void intel_mark_busy(struct drm_device *dev)
7069 {
7070         i915_update_gfx_val(dev->dev_private);
7071 }
7072
7073 void intel_mark_idle(struct drm_device *dev)
7074 {
7075         struct drm_crtc *crtc;
7076
7077         if (!i915_powersave)
7078                 return;
7079
7080         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
7081                 if (!crtc->fb)
7082                         continue;
7083
7084                 intel_decrease_pllclock(crtc);
7085         }
7086 }
7087
7088 void intel_mark_fb_busy(struct drm_i915_gem_object *obj,
7089                         struct intel_ring_buffer *ring)
7090 {
7091         struct drm_device *dev = obj->base.dev;
7092         struct drm_crtc *crtc;
7093
7094         if (!i915_powersave)
7095                 return;
7096
7097         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
7098                 if (!crtc->fb)
7099                         continue;
7100
7101                 if (to_intel_framebuffer(crtc->fb)->obj != obj)
7102                         continue;
7103
7104                 intel_increase_pllclock(crtc);
7105                 if (ring && intel_fbc_enabled(dev))
7106                         ring->fbc_dirty = true;
7107         }
7108 }
7109
7110 static void intel_crtc_destroy(struct drm_crtc *crtc)
7111 {
7112         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7113         struct drm_device *dev = crtc->dev;
7114         struct intel_unpin_work *work;
7115         unsigned long flags;
7116
7117         spin_lock_irqsave(&dev->event_lock, flags);
7118         work = intel_crtc->unpin_work;
7119         intel_crtc->unpin_work = NULL;
7120         spin_unlock_irqrestore(&dev->event_lock, flags);
7121
7122         if (work) {
7123                 cancel_work_sync(&work->work);
7124                 kfree(work);
7125         }
7126
7127         intel_crtc_cursor_set(crtc, NULL, 0, 0, 0);
7128
7129         drm_crtc_cleanup(crtc);
7130
7131         kfree(intel_crtc);
7132 }
7133
7134 static void intel_unpin_work_fn(struct work_struct *__work)
7135 {
7136         struct intel_unpin_work *work =
7137                 container_of(__work, struct intel_unpin_work, work);
7138         struct drm_device *dev = work->crtc->dev;
7139
7140         mutex_lock(&dev->struct_mutex);
7141         intel_unpin_fb_obj(work->old_fb_obj);
7142         drm_gem_object_unreference(&work->pending_flip_obj->base);
7143         drm_gem_object_unreference(&work->old_fb_obj->base);
7144
7145         intel_update_fbc(dev);
7146         mutex_unlock(&dev->struct_mutex);
7147
7148         BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0);
7149         atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count);
7150
7151         kfree(work);
7152 }
7153
7154 static void do_intel_finish_page_flip(struct drm_device *dev,
7155                                       struct drm_crtc *crtc)
7156 {
7157         drm_i915_private_t *dev_priv = dev->dev_private;
7158         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7159         struct intel_unpin_work *work;
7160         unsigned long flags;
7161
7162         /* Ignore early vblank irqs */
7163         if (intel_crtc == NULL)
7164                 return;
7165
7166         spin_lock_irqsave(&dev->event_lock, flags);
7167         work = intel_crtc->unpin_work;
7168
7169         /* Ensure we don't miss a work->pending update ... */
7170         smp_rmb();
7171
7172         if (work == NULL || atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
7173                 spin_unlock_irqrestore(&dev->event_lock, flags);
7174                 return;
7175         }
7176
7177         /* and that the unpin work is consistent wrt ->pending. */
7178         smp_rmb();
7179
7180         intel_crtc->unpin_work = NULL;
7181
7182         if (work->event)
7183                 drm_send_vblank_event(dev, intel_crtc->pipe, work->event);
7184
7185         drm_vblank_put(dev, intel_crtc->pipe);
7186
7187         spin_unlock_irqrestore(&dev->event_lock, flags);
7188
7189         wake_up_all(&dev_priv->pending_flip_queue);
7190
7191         queue_work(dev_priv->wq, &work->work);
7192
7193         trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
7194 }
7195
7196 void intel_finish_page_flip(struct drm_device *dev, int pipe)
7197 {
7198         drm_i915_private_t *dev_priv = dev->dev_private;
7199         struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
7200
7201         do_intel_finish_page_flip(dev, crtc);
7202 }
7203
7204 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
7205 {
7206         drm_i915_private_t *dev_priv = dev->dev_private;
7207         struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
7208
7209         do_intel_finish_page_flip(dev, crtc);
7210 }
7211
7212 void intel_prepare_page_flip(struct drm_device *dev, int plane)
7213 {
7214         drm_i915_private_t *dev_priv = dev->dev_private;
7215         struct intel_crtc *intel_crtc =
7216                 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
7217         unsigned long flags;
7218
7219         /* NB: An MMIO update of the plane base pointer will also
7220          * generate a page-flip completion irq, i.e. every modeset
7221          * is also accompanied by a spurious intel_prepare_page_flip().
7222          */
7223         spin_lock_irqsave(&dev->event_lock, flags);
7224         if (intel_crtc->unpin_work)
7225                 atomic_inc_not_zero(&intel_crtc->unpin_work->pending);
7226         spin_unlock_irqrestore(&dev->event_lock, flags);
7227 }
7228
7229 inline static void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
7230 {
7231         /* Ensure that the work item is consistent when activating it ... */
7232         smp_wmb();
7233         atomic_set(&intel_crtc->unpin_work->pending, INTEL_FLIP_PENDING);
7234         /* and that it is marked active as soon as the irq could fire. */
7235         smp_wmb();
7236 }
7237
7238 static int intel_gen2_queue_flip(struct drm_device *dev,
7239                                  struct drm_crtc *crtc,
7240                                  struct drm_framebuffer *fb,
7241                                  struct drm_i915_gem_object *obj)
7242 {
7243         struct drm_i915_private *dev_priv = dev->dev_private;
7244         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7245         u32 flip_mask;
7246         struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
7247         int ret;
7248
7249         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7250         if (ret)
7251                 goto err;
7252
7253         ret = intel_ring_begin(ring, 6);
7254         if (ret)
7255                 goto err_unpin;
7256
7257         /* Can't queue multiple flips, so wait for the previous
7258          * one to finish before executing the next.
7259          */
7260         if (intel_crtc->plane)
7261                 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
7262         else
7263                 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
7264         intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
7265         intel_ring_emit(ring, MI_NOOP);
7266         intel_ring_emit(ring, MI_DISPLAY_FLIP |
7267                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7268         intel_ring_emit(ring, fb->pitches[0]);
7269         intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
7270         intel_ring_emit(ring, 0); /* aux display base address, unused */
7271
7272         intel_mark_page_flip_active(intel_crtc);
7273         intel_ring_advance(ring);
7274         return 0;
7275
7276 err_unpin:
7277         intel_unpin_fb_obj(obj);
7278 err:
7279         return ret;
7280 }
7281
7282 static int intel_gen3_queue_flip(struct drm_device *dev,
7283                                  struct drm_crtc *crtc,
7284                                  struct drm_framebuffer *fb,
7285                                  struct drm_i915_gem_object *obj)
7286 {
7287         struct drm_i915_private *dev_priv = dev->dev_private;
7288         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7289         u32 flip_mask;
7290         struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
7291         int ret;
7292
7293         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7294         if (ret)
7295                 goto err;
7296
7297         ret = intel_ring_begin(ring, 6);
7298         if (ret)
7299                 goto err_unpin;
7300
7301         if (intel_crtc->plane)
7302                 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
7303         else
7304                 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
7305         intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
7306         intel_ring_emit(ring, MI_NOOP);
7307         intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
7308                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7309         intel_ring_emit(ring, fb->pitches[0]);
7310         intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
7311         intel_ring_emit(ring, MI_NOOP);
7312
7313         intel_mark_page_flip_active(intel_crtc);
7314         intel_ring_advance(ring);
7315         return 0;
7316
7317 err_unpin:
7318         intel_unpin_fb_obj(obj);
7319 err:
7320         return ret;
7321 }
7322
7323 static int intel_gen4_queue_flip(struct drm_device *dev,
7324                                  struct drm_crtc *crtc,
7325                                  struct drm_framebuffer *fb,
7326                                  struct drm_i915_gem_object *obj)
7327 {
7328         struct drm_i915_private *dev_priv = dev->dev_private;
7329         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7330         uint32_t pf, pipesrc;
7331         struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
7332         int ret;
7333
7334         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7335         if (ret)
7336                 goto err;
7337
7338         ret = intel_ring_begin(ring, 4);
7339         if (ret)
7340                 goto err_unpin;
7341
7342         /* i965+ uses the linear or tiled offsets from the
7343          * Display Registers (which do not change across a page-flip)
7344          * so we need only reprogram the base address.
7345          */
7346         intel_ring_emit(ring, MI_DISPLAY_FLIP |
7347                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7348         intel_ring_emit(ring, fb->pitches[0]);
7349         intel_ring_emit(ring,
7350                         (obj->gtt_offset + intel_crtc->dspaddr_offset) |
7351                         obj->tiling_mode);
7352
7353         /* XXX Enabling the panel-fitter across page-flip is so far
7354          * untested on non-native modes, so ignore it for now.
7355          * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
7356          */
7357         pf = 0;
7358         pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
7359         intel_ring_emit(ring, pf | pipesrc);
7360
7361         intel_mark_page_flip_active(intel_crtc);
7362         intel_ring_advance(ring);
7363         return 0;
7364
7365 err_unpin:
7366         intel_unpin_fb_obj(obj);
7367 err:
7368         return ret;
7369 }
7370
7371 static int intel_gen6_queue_flip(struct drm_device *dev,
7372                                  struct drm_crtc *crtc,
7373                                  struct drm_framebuffer *fb,
7374                                  struct drm_i915_gem_object *obj)
7375 {
7376         struct drm_i915_private *dev_priv = dev->dev_private;
7377         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7378         struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
7379         uint32_t pf, pipesrc;
7380         int ret;
7381
7382         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7383         if (ret)
7384                 goto err;
7385
7386         ret = intel_ring_begin(ring, 4);
7387         if (ret)
7388                 goto err_unpin;
7389
7390         intel_ring_emit(ring, MI_DISPLAY_FLIP |
7391                         MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
7392         intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
7393         intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
7394
7395         /* Contrary to the suggestions in the documentation,
7396          * "Enable Panel Fitter" does not seem to be required when page
7397          * flipping with a non-native mode, and worse causes a normal
7398          * modeset to fail.
7399          * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
7400          */
7401         pf = 0;
7402         pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
7403         intel_ring_emit(ring, pf | pipesrc);
7404
7405         intel_mark_page_flip_active(intel_crtc);
7406         intel_ring_advance(ring);
7407         return 0;
7408
7409 err_unpin:
7410         intel_unpin_fb_obj(obj);
7411 err:
7412         return ret;
7413 }
7414
7415 /*
7416  * On gen7 we currently use the blit ring because (in early silicon at least)
7417  * the render ring doesn't give us interrpts for page flip completion, which
7418  * means clients will hang after the first flip is queued.  Fortunately the
7419  * blit ring generates interrupts properly, so use it instead.
7420  */
7421 static int intel_gen7_queue_flip(struct drm_device *dev,
7422                                  struct drm_crtc *crtc,
7423                                  struct drm_framebuffer *fb,
7424                                  struct drm_i915_gem_object *obj)
7425 {
7426         struct drm_i915_private *dev_priv = dev->dev_private;
7427         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7428         struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
7429         uint32_t plane_bit = 0;
7430         int ret;
7431
7432         ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
7433         if (ret)
7434                 goto err;
7435
7436         switch(intel_crtc->plane) {
7437         case PLANE_A:
7438                 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
7439                 break;
7440         case PLANE_B:
7441                 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
7442                 break;
7443         case PLANE_C:
7444                 plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
7445                 break;
7446         default:
7447                 WARN_ONCE(1, "unknown plane in flip command\n");
7448                 ret = -ENODEV;
7449                 goto err_unpin;
7450         }
7451
7452         ret = intel_ring_begin(ring, 4);
7453         if (ret)
7454                 goto err_unpin;
7455
7456         intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
7457         intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
7458         intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
7459         intel_ring_emit(ring, (MI_NOOP));
7460
7461         intel_mark_page_flip_active(intel_crtc);
7462         intel_ring_advance(ring);
7463         return 0;
7464
7465 err_unpin:
7466         intel_unpin_fb_obj(obj);
7467 err:
7468         return ret;
7469 }
7470
7471 static int intel_default_queue_flip(struct drm_device *dev,
7472                                     struct drm_crtc *crtc,
7473                                     struct drm_framebuffer *fb,
7474                                     struct drm_i915_gem_object *obj)
7475 {
7476         return -ENODEV;
7477 }
7478
7479 static int intel_crtc_page_flip(struct drm_crtc *crtc,
7480                                 struct drm_framebuffer *fb,
7481                                 struct drm_pending_vblank_event *event)
7482 {
7483         struct drm_device *dev = crtc->dev;
7484         struct drm_i915_private *dev_priv = dev->dev_private;
7485         struct drm_framebuffer *old_fb = crtc->fb;
7486         struct drm_i915_gem_object *obj = to_intel_framebuffer(fb)->obj;
7487         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7488         struct intel_unpin_work *work;
7489         unsigned long flags;
7490         int ret;
7491
7492         /* Can't change pixel format via MI display flips. */
7493         if (fb->pixel_format != crtc->fb->pixel_format)
7494                 return -EINVAL;
7495
7496         /*
7497          * TILEOFF/LINOFF registers can't be changed via MI display flips.
7498          * Note that pitch changes could also affect these register.
7499          */
7500         if (INTEL_INFO(dev)->gen > 3 &&
7501             (fb->offsets[0] != crtc->fb->offsets[0] ||
7502              fb->pitches[0] != crtc->fb->pitches[0]))
7503                 return -EINVAL;
7504
7505         work = kzalloc(sizeof *work, GFP_KERNEL);
7506         if (work == NULL)
7507                 return -ENOMEM;
7508
7509         work->event = event;
7510         work->crtc = crtc;
7511         work->old_fb_obj = to_intel_framebuffer(old_fb)->obj;
7512         INIT_WORK(&work->work, intel_unpin_work_fn);
7513
7514         ret = drm_vblank_get(dev, intel_crtc->pipe);
7515         if (ret)
7516                 goto free_work;
7517
7518         /* We borrow the event spin lock for protecting unpin_work */
7519         spin_lock_irqsave(&dev->event_lock, flags);
7520         if (intel_crtc->unpin_work) {
7521                 spin_unlock_irqrestore(&dev->event_lock, flags);
7522                 kfree(work);
7523                 drm_vblank_put(dev, intel_crtc->pipe);
7524
7525                 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
7526                 return -EBUSY;
7527         }
7528         intel_crtc->unpin_work = work;
7529         spin_unlock_irqrestore(&dev->event_lock, flags);
7530
7531         if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
7532                 flush_workqueue(dev_priv->wq);
7533
7534         ret = i915_mutex_lock_interruptible(dev);
7535         if (ret)
7536                 goto cleanup;
7537
7538         /* Reference the objects for the scheduled work. */
7539         drm_gem_object_reference(&work->old_fb_obj->base);
7540         drm_gem_object_reference(&obj->base);
7541
7542         crtc->fb = fb;
7543
7544         work->pending_flip_obj = obj;
7545
7546         work->enable_stall_check = true;
7547
7548         atomic_inc(&intel_crtc->unpin_work_count);
7549         intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter);
7550
7551         ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
7552         if (ret)
7553                 goto cleanup_pending;
7554
7555         intel_disable_fbc(dev);
7556         intel_mark_fb_busy(obj, NULL);
7557         mutex_unlock(&dev->struct_mutex);
7558
7559         trace_i915_flip_request(intel_crtc->plane, obj);
7560
7561         return 0;
7562
7563 cleanup_pending:
7564         atomic_dec(&intel_crtc->unpin_work_count);
7565         crtc->fb = old_fb;
7566         drm_gem_object_unreference(&work->old_fb_obj->base);
7567         drm_gem_object_unreference(&obj->base);
7568         mutex_unlock(&dev->struct_mutex);
7569
7570 cleanup:
7571         spin_lock_irqsave(&dev->event_lock, flags);
7572         intel_crtc->unpin_work = NULL;
7573         spin_unlock_irqrestore(&dev->event_lock, flags);
7574
7575         drm_vblank_put(dev, intel_crtc->pipe);
7576 free_work:
7577         kfree(work);
7578
7579         return ret;
7580 }
7581
7582 static struct drm_crtc_helper_funcs intel_helper_funcs = {
7583         .mode_set_base_atomic = intel_pipe_set_base_atomic,
7584         .load_lut = intel_crtc_load_lut,
7585 };
7586
7587 static bool intel_encoder_crtc_ok(struct drm_encoder *encoder,
7588                                   struct drm_crtc *crtc)
7589 {
7590         struct drm_device *dev;
7591         struct drm_crtc *tmp;
7592         int crtc_mask = 1;
7593
7594         WARN(!crtc, "checking null crtc?\n");
7595
7596         dev = crtc->dev;
7597
7598         list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
7599                 if (tmp == crtc)
7600                         break;
7601                 crtc_mask <<= 1;
7602         }
7603
7604         if (encoder->possible_crtcs & crtc_mask)
7605                 return true;
7606         return false;
7607 }
7608
7609 /**
7610  * intel_modeset_update_staged_output_state
7611  *
7612  * Updates the staged output configuration state, e.g. after we've read out the
7613  * current hw state.
7614  */
7615 static void intel_modeset_update_staged_output_state(struct drm_device *dev)
7616 {
7617         struct intel_encoder *encoder;
7618         struct intel_connector *connector;
7619
7620         list_for_each_entry(connector, &dev->mode_config.connector_list,
7621                             base.head) {
7622                 connector->new_encoder =
7623                         to_intel_encoder(connector->base.encoder);
7624         }
7625
7626         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7627                             base.head) {
7628                 encoder->new_crtc =
7629                         to_intel_crtc(encoder->base.crtc);
7630         }
7631 }
7632
7633 /**
7634  * intel_modeset_commit_output_state
7635  *
7636  * This function copies the stage display pipe configuration to the real one.
7637  */
7638 static void intel_modeset_commit_output_state(struct drm_device *dev)
7639 {
7640         struct intel_encoder *encoder;
7641         struct intel_connector *connector;
7642
7643         list_for_each_entry(connector, &dev->mode_config.connector_list,
7644                             base.head) {
7645                 connector->base.encoder = &connector->new_encoder->base;
7646         }
7647
7648         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7649                             base.head) {
7650                 encoder->base.crtc = &encoder->new_crtc->base;
7651         }
7652 }
7653
7654 static void
7655 connected_sink_compute_bpp(struct intel_connector * connector,
7656                            struct intel_crtc_config *pipe_config)
7657 {
7658         int bpp = pipe_config->pipe_bpp;
7659
7660         DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n",
7661                 connector->base.base.id,
7662                 drm_get_connector_name(&connector->base));
7663
7664         /* Don't use an invalid EDID bpc value */
7665         if (connector->base.display_info.bpc &&
7666             connector->base.display_info.bpc * 3 < bpp) {
7667                 DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n",
7668                               bpp, connector->base.display_info.bpc*3);
7669                 pipe_config->pipe_bpp = connector->base.display_info.bpc*3;
7670         }
7671
7672         /* Clamp bpp to 8 on screens without EDID 1.4 */
7673         if (connector->base.display_info.bpc == 0 && bpp > 24) {
7674                 DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n",
7675                               bpp);
7676                 pipe_config->pipe_bpp = 24;
7677         }
7678 }
7679
7680 static int
7681 compute_baseline_pipe_bpp(struct intel_crtc *crtc,
7682                           struct drm_framebuffer *fb,
7683                           struct intel_crtc_config *pipe_config)
7684 {
7685         struct drm_device *dev = crtc->base.dev;
7686         struct intel_connector *connector;
7687         int bpp;
7688
7689         switch (fb->pixel_format) {
7690         case DRM_FORMAT_C8:
7691                 bpp = 8*3; /* since we go through a colormap */
7692                 break;
7693         case DRM_FORMAT_XRGB1555:
7694         case DRM_FORMAT_ARGB1555:
7695                 /* checked in intel_framebuffer_init already */
7696                 if (WARN_ON(INTEL_INFO(dev)->gen > 3))
7697                         return -EINVAL;
7698         case DRM_FORMAT_RGB565:
7699                 bpp = 6*3; /* min is 18bpp */
7700                 break;
7701         case DRM_FORMAT_XBGR8888:
7702         case DRM_FORMAT_ABGR8888:
7703                 /* checked in intel_framebuffer_init already */
7704                 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
7705                         return -EINVAL;
7706         case DRM_FORMAT_XRGB8888:
7707         case DRM_FORMAT_ARGB8888:
7708                 bpp = 8*3;
7709                 break;
7710         case DRM_FORMAT_XRGB2101010:
7711         case DRM_FORMAT_ARGB2101010:
7712         case DRM_FORMAT_XBGR2101010:
7713         case DRM_FORMAT_ABGR2101010:
7714                 /* checked in intel_framebuffer_init already */
7715                 if (WARN_ON(INTEL_INFO(dev)->gen < 4))
7716                         return -EINVAL;
7717                 bpp = 10*3;
7718                 break;
7719         /* TODO: gen4+ supports 16 bpc floating point, too. */
7720         default:
7721                 DRM_DEBUG_KMS("unsupported depth\n");
7722                 return -EINVAL;
7723         }
7724
7725         pipe_config->pipe_bpp = bpp;
7726
7727         /* Clamp display bpp to EDID value */
7728         list_for_each_entry(connector, &dev->mode_config.connector_list,
7729                             base.head) {
7730                 if (!connector->new_encoder ||
7731                     connector->new_encoder->new_crtc != crtc)
7732                         continue;
7733
7734                 connected_sink_compute_bpp(connector, pipe_config);
7735         }
7736
7737         return bpp;
7738 }
7739
7740 static void intel_dump_pipe_config(struct intel_crtc *crtc,
7741                                    struct intel_crtc_config *pipe_config,
7742                                    const char *context)
7743 {
7744         DRM_DEBUG_KMS("[CRTC:%d]%s config for pipe %c\n", crtc->base.base.id,
7745                       context, pipe_name(crtc->pipe));
7746
7747         DRM_DEBUG_KMS("cpu_transcoder: %c\n", transcoder_name(pipe_config->cpu_transcoder));
7748         DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n",
7749                       pipe_config->pipe_bpp, pipe_config->dither);
7750         DRM_DEBUG_KMS("fdi/pch: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
7751                       pipe_config->has_pch_encoder,
7752                       pipe_config->fdi_lanes,
7753                       pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n,
7754                       pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n,
7755                       pipe_config->fdi_m_n.tu);
7756         DRM_DEBUG_KMS("requested mode:\n");
7757         drm_mode_debug_printmodeline(&pipe_config->requested_mode);
7758         DRM_DEBUG_KMS("adjusted mode:\n");
7759         drm_mode_debug_printmodeline(&pipe_config->adjusted_mode);
7760         DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
7761                       pipe_config->gmch_pfit.control,
7762                       pipe_config->gmch_pfit.pgm_ratios,
7763                       pipe_config->gmch_pfit.lvds_border_bits);
7764         DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x\n",
7765                       pipe_config->pch_pfit.pos,
7766                       pipe_config->pch_pfit.size);
7767         DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
7768 }
7769
7770 static bool check_encoder_cloning(struct drm_crtc *crtc)
7771 {
7772         int num_encoders = 0;
7773         bool uncloneable_encoders = false;
7774         struct intel_encoder *encoder;
7775
7776         list_for_each_entry(encoder, &crtc->dev->mode_config.encoder_list,
7777                             base.head) {
7778                 if (&encoder->new_crtc->base != crtc)
7779                         continue;
7780
7781                 num_encoders++;
7782                 if (!encoder->cloneable)
7783                         uncloneable_encoders = true;
7784         }
7785
7786         return !(num_encoders > 1 && uncloneable_encoders);
7787 }
7788
7789 static struct intel_crtc_config *
7790 intel_modeset_pipe_config(struct drm_crtc *crtc,
7791                           struct drm_framebuffer *fb,
7792                           struct drm_display_mode *mode)
7793 {
7794         struct drm_device *dev = crtc->dev;
7795         struct drm_encoder_helper_funcs *encoder_funcs;
7796         struct intel_encoder *encoder;
7797         struct intel_crtc_config *pipe_config;
7798         int plane_bpp, ret = -EINVAL;
7799         bool retry = true;
7800
7801         if (!check_encoder_cloning(crtc)) {
7802                 DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
7803                 return ERR_PTR(-EINVAL);
7804         }
7805
7806         pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
7807         if (!pipe_config)
7808                 return ERR_PTR(-ENOMEM);
7809
7810         drm_mode_copy(&pipe_config->adjusted_mode, mode);
7811         drm_mode_copy(&pipe_config->requested_mode, mode);
7812         pipe_config->cpu_transcoder = to_intel_crtc(crtc)->pipe;
7813         pipe_config->shared_dpll = DPLL_ID_PRIVATE;
7814
7815         /* Compute a starting value for pipe_config->pipe_bpp taking the source
7816          * plane pixel format and any sink constraints into account. Returns the
7817          * source plane bpp so that dithering can be selected on mismatches
7818          * after encoders and crtc also have had their say. */
7819         plane_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
7820                                               fb, pipe_config);
7821         if (plane_bpp < 0)
7822                 goto fail;
7823
7824 encoder_retry:
7825         /* Ensure the port clock defaults are reset when retrying. */
7826         pipe_config->port_clock = 0;
7827         pipe_config->pixel_multiplier = 1;
7828
7829         /* Pass our mode to the connectors and the CRTC to give them a chance to
7830          * adjust it according to limitations or connector properties, and also
7831          * a chance to reject the mode entirely.
7832          */
7833         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7834                             base.head) {
7835
7836                 if (&encoder->new_crtc->base != crtc)
7837                         continue;
7838
7839                 if (encoder->compute_config) {
7840                         if (!(encoder->compute_config(encoder, pipe_config))) {
7841                                 DRM_DEBUG_KMS("Encoder config failure\n");
7842                                 goto fail;
7843                         }
7844
7845                         continue;
7846                 }
7847
7848                 encoder_funcs = encoder->base.helper_private;
7849                 if (!(encoder_funcs->mode_fixup(&encoder->base,
7850                                                 &pipe_config->requested_mode,
7851                                                 &pipe_config->adjusted_mode))) {
7852                         DRM_DEBUG_KMS("Encoder fixup failed\n");
7853                         goto fail;
7854                 }
7855         }
7856
7857         /* Set default port clock if not overwritten by the encoder. Needs to be
7858          * done afterwards in case the encoder adjusts the mode. */
7859         if (!pipe_config->port_clock)
7860                 pipe_config->port_clock = pipe_config->adjusted_mode.clock;
7861
7862         ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
7863         if (ret < 0) {
7864                 DRM_DEBUG_KMS("CRTC fixup failed\n");
7865                 goto fail;
7866         }
7867
7868         if (ret == RETRY) {
7869                 if (WARN(!retry, "loop in pipe configuration computation\n")) {
7870                         ret = -EINVAL;
7871                         goto fail;
7872                 }
7873
7874                 DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
7875                 retry = false;
7876                 goto encoder_retry;
7877         }
7878
7879         pipe_config->dither = pipe_config->pipe_bpp != plane_bpp;
7880         DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n",
7881                       plane_bpp, pipe_config->pipe_bpp, pipe_config->dither);
7882
7883         return pipe_config;
7884 fail:
7885         kfree(pipe_config);
7886         return ERR_PTR(ret);
7887 }
7888
7889 /* Computes which crtcs are affected and sets the relevant bits in the mask. For
7890  * simplicity we use the crtc's pipe number (because it's easier to obtain). */
7891 static void
7892 intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes,
7893                              unsigned *prepare_pipes, unsigned *disable_pipes)
7894 {
7895         struct intel_crtc *intel_crtc;
7896         struct drm_device *dev = crtc->dev;
7897         struct intel_encoder *encoder;
7898         struct intel_connector *connector;
7899         struct drm_crtc *tmp_crtc;
7900
7901         *disable_pipes = *modeset_pipes = *prepare_pipes = 0;
7902
7903         /* Check which crtcs have changed outputs connected to them, these need
7904          * to be part of the prepare_pipes mask. We don't (yet) support global
7905          * modeset across multiple crtcs, so modeset_pipes will only have one
7906          * bit set at most. */
7907         list_for_each_entry(connector, &dev->mode_config.connector_list,
7908                             base.head) {
7909                 if (connector->base.encoder == &connector->new_encoder->base)
7910                         continue;
7911
7912                 if (connector->base.encoder) {
7913                         tmp_crtc = connector->base.encoder->crtc;
7914
7915                         *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
7916                 }
7917
7918                 if (connector->new_encoder)
7919                         *prepare_pipes |=
7920                                 1 << connector->new_encoder->new_crtc->pipe;
7921         }
7922
7923         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7924                             base.head) {
7925                 if (encoder->base.crtc == &encoder->new_crtc->base)
7926                         continue;
7927
7928                 if (encoder->base.crtc) {
7929                         tmp_crtc = encoder->base.crtc;
7930
7931                         *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
7932                 }
7933
7934                 if (encoder->new_crtc)
7935                         *prepare_pipes |= 1 << encoder->new_crtc->pipe;
7936         }
7937
7938         /* Check for any pipes that will be fully disabled ... */
7939         list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
7940                             base.head) {
7941                 bool used = false;
7942
7943                 /* Don't try to disable disabled crtcs. */
7944                 if (!intel_crtc->base.enabled)
7945                         continue;
7946
7947                 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
7948                                     base.head) {
7949                         if (encoder->new_crtc == intel_crtc)
7950                                 used = true;
7951                 }
7952
7953                 if (!used)
7954                         *disable_pipes |= 1 << intel_crtc->pipe;
7955         }
7956
7957
7958         /* set_mode is also used to update properties on life display pipes. */
7959         intel_crtc = to_intel_crtc(crtc);
7960         if (crtc->enabled)
7961                 *prepare_pipes |= 1 << intel_crtc->pipe;
7962
7963         /*
7964          * For simplicity do a full modeset on any pipe where the output routing
7965          * changed. We could be more clever, but that would require us to be
7966          * more careful with calling the relevant encoder->mode_set functions.
7967          */
7968         if (*prepare_pipes)
7969                 *modeset_pipes = *prepare_pipes;
7970
7971         /* ... and mask these out. */
7972         *modeset_pipes &= ~(*disable_pipes);
7973         *prepare_pipes &= ~(*disable_pipes);
7974
7975         /*
7976          * HACK: We don't (yet) fully support global modesets. intel_set_config
7977          * obies this rule, but the modeset restore mode of
7978          * intel_modeset_setup_hw_state does not.
7979          */
7980         *modeset_pipes &= 1 << intel_crtc->pipe;
7981         *prepare_pipes &= 1 << intel_crtc->pipe;
7982
7983         DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
7984                       *modeset_pipes, *prepare_pipes, *disable_pipes);
7985 }
7986
7987 static bool intel_crtc_in_use(struct drm_crtc *crtc)
7988 {
7989         struct drm_encoder *encoder;
7990         struct drm_device *dev = crtc->dev;
7991
7992         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
7993                 if (encoder->crtc == crtc)
7994                         return true;
7995
7996         return false;
7997 }
7998
7999 static void
8000 intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes)
8001 {
8002         struct intel_encoder *intel_encoder;
8003         struct intel_crtc *intel_crtc;
8004         struct drm_connector *connector;
8005
8006         list_for_each_entry(intel_encoder, &dev->mode_config.encoder_list,
8007                             base.head) {
8008                 if (!intel_encoder->base.crtc)
8009                         continue;
8010
8011                 intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
8012
8013                 if (prepare_pipes & (1 << intel_crtc->pipe))
8014                         intel_encoder->connectors_active = false;
8015         }
8016
8017         intel_modeset_commit_output_state(dev);
8018
8019         /* Update computed state. */
8020         list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
8021                             base.head) {
8022                 intel_crtc->base.enabled = intel_crtc_in_use(&intel_crtc->base);
8023         }
8024
8025         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
8026                 if (!connector->encoder || !connector->encoder->crtc)
8027                         continue;
8028
8029                 intel_crtc = to_intel_crtc(connector->encoder->crtc);
8030
8031                 if (prepare_pipes & (1 << intel_crtc->pipe)) {
8032                         struct drm_property *dpms_property =
8033                                 dev->mode_config.dpms_property;
8034
8035                         connector->dpms = DRM_MODE_DPMS_ON;
8036                         drm_object_property_set_value(&connector->base,
8037                                                          dpms_property,
8038                                                          DRM_MODE_DPMS_ON);
8039
8040                         intel_encoder = to_intel_encoder(connector->encoder);
8041                         intel_encoder->connectors_active = true;
8042                 }
8043         }
8044
8045 }
8046
8047 #define for_each_intel_crtc_masked(dev, mask, intel_crtc) \
8048         list_for_each_entry((intel_crtc), \
8049                             &(dev)->mode_config.crtc_list, \
8050                             base.head) \
8051                 if (mask & (1 <<(intel_crtc)->pipe))
8052
8053 static bool
8054 intel_pipe_config_compare(struct drm_device *dev,
8055                           struct intel_crtc_config *current_config,
8056                           struct intel_crtc_config *pipe_config)
8057 {
8058 #define PIPE_CONF_CHECK_X(name) \
8059         if (current_config->name != pipe_config->name) { \
8060                 DRM_ERROR("mismatch in " #name " " \
8061                           "(expected 0x%08x, found 0x%08x)\n", \
8062                           current_config->name, \
8063                           pipe_config->name); \
8064                 return false; \
8065         }
8066
8067 #define PIPE_CONF_CHECK_I(name) \
8068         if (current_config->name != pipe_config->name) { \
8069                 DRM_ERROR("mismatch in " #name " " \
8070                           "(expected %i, found %i)\n", \
8071                           current_config->name, \
8072                           pipe_config->name); \
8073                 return false; \
8074         }
8075
8076 #define PIPE_CONF_CHECK_FLAGS(name, mask)       \
8077         if ((current_config->name ^ pipe_config->name) & (mask)) { \
8078                 DRM_ERROR("mismatch in " #name " " \
8079                           "(expected %i, found %i)\n", \
8080                           current_config->name & (mask), \
8081                           pipe_config->name & (mask)); \
8082                 return false; \
8083         }
8084
8085 #define PIPE_CONF_QUIRK(quirk)  \
8086         ((current_config->quirks | pipe_config->quirks) & (quirk))
8087
8088         PIPE_CONF_CHECK_I(cpu_transcoder);
8089
8090         PIPE_CONF_CHECK_I(has_pch_encoder);
8091         PIPE_CONF_CHECK_I(fdi_lanes);
8092         PIPE_CONF_CHECK_I(fdi_m_n.gmch_m);
8093         PIPE_CONF_CHECK_I(fdi_m_n.gmch_n);
8094         PIPE_CONF_CHECK_I(fdi_m_n.link_m);
8095         PIPE_CONF_CHECK_I(fdi_m_n.link_n);
8096         PIPE_CONF_CHECK_I(fdi_m_n.tu);
8097
8098         PIPE_CONF_CHECK_I(adjusted_mode.crtc_hdisplay);
8099         PIPE_CONF_CHECK_I(adjusted_mode.crtc_htotal);
8100         PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_start);
8101         PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_end);
8102         PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_start);
8103         PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_end);
8104
8105         PIPE_CONF_CHECK_I(adjusted_mode.crtc_vdisplay);
8106         PIPE_CONF_CHECK_I(adjusted_mode.crtc_vtotal);
8107         PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_start);
8108         PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_end);
8109         PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_start);
8110         PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_end);
8111
8112         if (!HAS_PCH_SPLIT(dev))
8113                 PIPE_CONF_CHECK_I(pixel_multiplier);
8114
8115         PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
8116                               DRM_MODE_FLAG_INTERLACE);
8117
8118         if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) {
8119                 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
8120                                       DRM_MODE_FLAG_PHSYNC);
8121                 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
8122                                       DRM_MODE_FLAG_NHSYNC);
8123                 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
8124                                       DRM_MODE_FLAG_PVSYNC);
8125                 PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags,
8126                                       DRM_MODE_FLAG_NVSYNC);
8127         }
8128
8129         PIPE_CONF_CHECK_I(requested_mode.hdisplay);
8130         PIPE_CONF_CHECK_I(requested_mode.vdisplay);
8131
8132         PIPE_CONF_CHECK_I(gmch_pfit.control);
8133         /* pfit ratios are autocomputed by the hw on gen4+ */
8134         if (INTEL_INFO(dev)->gen < 4)
8135                 PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
8136         PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
8137         PIPE_CONF_CHECK_I(pch_pfit.pos);
8138         PIPE_CONF_CHECK_I(pch_pfit.size);
8139
8140         PIPE_CONF_CHECK_I(ips_enabled);
8141
8142         PIPE_CONF_CHECK_I(shared_dpll);
8143         PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
8144         PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
8145         PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
8146
8147 #undef PIPE_CONF_CHECK_X
8148 #undef PIPE_CONF_CHECK_I
8149 #undef PIPE_CONF_CHECK_FLAGS
8150 #undef PIPE_CONF_QUIRK
8151
8152         return true;
8153 }
8154
8155 static void
8156 check_connector_state(struct drm_device *dev)
8157 {
8158         struct intel_connector *connector;
8159
8160         list_for_each_entry(connector, &dev->mode_config.connector_list,
8161                             base.head) {
8162                 /* This also checks the encoder/connector hw state with the
8163                  * ->get_hw_state callbacks. */
8164                 intel_connector_check_state(connector);
8165
8166                 WARN(&connector->new_encoder->base != connector->base.encoder,
8167                      "connector's staged encoder doesn't match current encoder\n");
8168         }
8169 }
8170
8171 static void
8172 check_encoder_state(struct drm_device *dev)
8173 {
8174         struct intel_encoder *encoder;
8175         struct intel_connector *connector;
8176
8177         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
8178                             base.head) {
8179                 bool enabled = false;
8180                 bool active = false;
8181                 enum pipe pipe, tracked_pipe;
8182
8183                 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
8184                               encoder->base.base.id,
8185                               drm_get_encoder_name(&encoder->base));
8186
8187                 WARN(&encoder->new_crtc->base != encoder->base.crtc,
8188                      "encoder's stage crtc doesn't match current crtc\n");
8189                 WARN(encoder->connectors_active && !encoder->base.crtc,
8190                      "encoder's active_connectors set, but no crtc\n");
8191
8192                 list_for_each_entry(connector, &dev->mode_config.connector_list,
8193                                     base.head) {
8194                         if (connector->base.encoder != &encoder->base)
8195                                 continue;
8196                         enabled = true;
8197                         if (connector->base.dpms != DRM_MODE_DPMS_OFF)
8198                                 active = true;
8199                 }
8200                 WARN(!!encoder->base.crtc != enabled,
8201                      "encoder's enabled state mismatch "
8202                      "(expected %i, found %i)\n",
8203                      !!encoder->base.crtc, enabled);
8204                 WARN(active && !encoder->base.crtc,
8205                      "active encoder with no crtc\n");
8206
8207                 WARN(encoder->connectors_active != active,
8208                      "encoder's computed active state doesn't match tracked active state "
8209                      "(expected %i, found %i)\n", active, encoder->connectors_active);
8210
8211                 active = encoder->get_hw_state(encoder, &pipe);
8212                 WARN(active != encoder->connectors_active,
8213                      "encoder's hw state doesn't match sw tracking "
8214                      "(expected %i, found %i)\n",
8215                      encoder->connectors_active, active);
8216
8217                 if (!encoder->base.crtc)
8218                         continue;
8219
8220                 tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
8221                 WARN(active && pipe != tracked_pipe,
8222                      "active encoder's pipe doesn't match"
8223                      "(expected %i, found %i)\n",
8224                      tracked_pipe, pipe);
8225
8226         }
8227 }
8228
8229 static void
8230 check_crtc_state(struct drm_device *dev)
8231 {
8232         drm_i915_private_t *dev_priv = dev->dev_private;
8233         struct intel_crtc *crtc;
8234         struct intel_encoder *encoder;
8235         struct intel_crtc_config pipe_config;
8236
8237         list_for_each_entry(crtc, &dev->mode_config.crtc_list,
8238                             base.head) {
8239                 bool enabled = false;
8240                 bool active = false;
8241
8242                 memset(&pipe_config, 0, sizeof(pipe_config));
8243
8244                 DRM_DEBUG_KMS("[CRTC:%d]\n",
8245                               crtc->base.base.id);
8246
8247                 WARN(crtc->active && !crtc->base.enabled,
8248                      "active crtc, but not enabled in sw tracking\n");
8249
8250                 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
8251                                     base.head) {
8252                         if (encoder->base.crtc != &crtc->base)
8253                                 continue;
8254                         enabled = true;
8255                         if (encoder->connectors_active)
8256                                 active = true;
8257                 }
8258
8259                 WARN(active != crtc->active,
8260                      "crtc's computed active state doesn't match tracked active state "
8261                      "(expected %i, found %i)\n", active, crtc->active);
8262                 WARN(enabled != crtc->base.enabled,
8263                      "crtc's computed enabled state doesn't match tracked enabled state "
8264                      "(expected %i, found %i)\n", enabled, crtc->base.enabled);
8265
8266                 active = dev_priv->display.get_pipe_config(crtc,
8267                                                            &pipe_config);
8268
8269                 /* hw state is inconsistent with the pipe A quirk */
8270                 if (crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
8271                         active = crtc->active;
8272
8273                 list_for_each_entry(encoder, &dev->mode_config.encoder_list,
8274                                     base.head) {
8275                         if (encoder->base.crtc != &crtc->base)
8276                                 continue;
8277                         if (encoder->get_config)
8278                                 encoder->get_config(encoder, &pipe_config);
8279                 }
8280
8281                 WARN(crtc->active != active,
8282                      "crtc active state doesn't match with hw state "
8283                      "(expected %i, found %i)\n", crtc->active, active);
8284
8285                 if (active &&
8286                     !intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) {
8287                         WARN(1, "pipe state doesn't match!\n");
8288                         intel_dump_pipe_config(crtc, &pipe_config,
8289                                                "[hw state]");
8290                         intel_dump_pipe_config(crtc, &crtc->config,
8291                                                "[sw state]");
8292                 }
8293         }
8294 }
8295
8296 static void
8297 check_shared_dpll_state(struct drm_device *dev)
8298 {
8299         drm_i915_private_t *dev_priv = dev->dev_private;
8300         struct intel_crtc *crtc;
8301         struct intel_dpll_hw_state dpll_hw_state;
8302         int i;
8303
8304         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
8305                 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
8306                 int enabled_crtcs = 0, active_crtcs = 0;
8307                 bool active;
8308
8309                 memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));
8310
8311                 DRM_DEBUG_KMS("%s\n", pll->name);
8312
8313                 active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state);
8314
8315                 WARN(pll->active > pll->refcount,
8316                      "more active pll users than references: %i vs %i\n",
8317                      pll->active, pll->refcount);
8318                 WARN(pll->active && !pll->on,
8319                      "pll in active use but not on in sw tracking\n");
8320                 WARN(pll->on != active,
8321                      "pll on state mismatch (expected %i, found %i)\n",
8322                      pll->on, active);
8323
8324                 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
8325                                     base.head) {
8326                         if (crtc->base.enabled && intel_crtc_to_shared_dpll(crtc) == pll)
8327                                 enabled_crtcs++;
8328                         if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
8329                                 active_crtcs++;
8330                 }
8331                 WARN(pll->active != active_crtcs,
8332                      "pll active crtcs mismatch (expected %i, found %i)\n",
8333                      pll->active, active_crtcs);
8334                 WARN(pll->refcount != enabled_crtcs,
8335                      "pll enabled crtcs mismatch (expected %i, found %i)\n",
8336                      pll->refcount, enabled_crtcs);
8337
8338                 WARN(pll->on && memcmp(&pll->hw_state, &dpll_hw_state,
8339                                        sizeof(dpll_hw_state)),
8340                      "pll hw state mismatch\n");
8341         }
8342 }
8343
8344 void
8345 intel_modeset_check_state(struct drm_device *dev)
8346 {
8347         check_connector_state(dev);
8348         check_encoder_state(dev);
8349         check_crtc_state(dev);
8350         check_shared_dpll_state(dev);
8351 }
8352
8353 static int __intel_set_mode(struct drm_crtc *crtc,
8354                             struct drm_display_mode *mode,
8355                             int x, int y, struct drm_framebuffer *fb)
8356 {
8357         struct drm_device *dev = crtc->dev;
8358         drm_i915_private_t *dev_priv = dev->dev_private;
8359         struct drm_display_mode *saved_mode, *saved_hwmode;
8360         struct intel_crtc_config *pipe_config = NULL;
8361         struct intel_crtc *intel_crtc;
8362         unsigned disable_pipes, prepare_pipes, modeset_pipes;
8363         int ret = 0;
8364
8365         saved_mode = kmalloc(2 * sizeof(*saved_mode), GFP_KERNEL);
8366         if (!saved_mode)
8367                 return -ENOMEM;
8368         saved_hwmode = saved_mode + 1;
8369
8370         intel_modeset_affected_pipes(crtc, &modeset_pipes,
8371                                      &prepare_pipes, &disable_pipes);
8372
8373         *saved_hwmode = crtc->hwmode;
8374         *saved_mode = crtc->mode;
8375
8376         /* Hack: Because we don't (yet) support global modeset on multiple
8377          * crtcs, we don't keep track of the new mode for more than one crtc.
8378          * Hence simply check whether any bit is set in modeset_pipes in all the
8379          * pieces of code that are not yet converted to deal with mutliple crtcs
8380          * changing their mode at the same time. */
8381         if (modeset_pipes) {
8382                 pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
8383                 if (IS_ERR(pipe_config)) {
8384                         ret = PTR_ERR(pipe_config);
8385                         pipe_config = NULL;
8386
8387                         goto out;
8388                 }
8389                 intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
8390                                        "[modeset]");
8391         }
8392
8393         for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
8394                 intel_crtc_disable(&intel_crtc->base);
8395
8396         for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
8397                 if (intel_crtc->base.enabled)
8398                         dev_priv->display.crtc_disable(&intel_crtc->base);
8399         }
8400
8401         /* crtc->mode is already used by the ->mode_set callbacks, hence we need
8402          * to set it here already despite that we pass it down the callchain.
8403          */
8404         if (modeset_pipes) {
8405                 crtc->mode = *mode;
8406                 /* mode_set/enable/disable functions rely on a correct pipe
8407                  * config. */
8408                 to_intel_crtc(crtc)->config = *pipe_config;
8409         }
8410
8411         /* Only after disabling all output pipelines that will be changed can we
8412          * update the the output configuration. */
8413         intel_modeset_update_state(dev, prepare_pipes);
8414
8415         if (dev_priv->display.modeset_global_resources)
8416                 dev_priv->display.modeset_global_resources(dev);
8417
8418         /* Set up the DPLL and any encoders state that needs to adjust or depend
8419          * on the DPLL.
8420          */
8421         for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
8422                 ret = intel_crtc_mode_set(&intel_crtc->base,
8423                                           x, y, fb);
8424                 if (ret)
8425                         goto done;
8426         }
8427
8428         /* Now enable the clocks, plane, pipe, and connectors that we set up. */
8429         for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc)
8430                 dev_priv->display.crtc_enable(&intel_crtc->base);
8431
8432         if (modeset_pipes) {
8433                 /* Store real post-adjustment hardware mode. */
8434                 crtc->hwmode = pipe_config->adjusted_mode;
8435
8436                 /* Calculate and store various constants which
8437                  * are later needed by vblank and swap-completion
8438                  * timestamping. They are derived from true hwmode.
8439                  */
8440                 drm_calc_timestamping_constants(crtc);
8441         }
8442
8443         /* FIXME: add subpixel order */
8444 done:
8445         if (ret && crtc->enabled) {
8446                 crtc->hwmode = *saved_hwmode;
8447                 crtc->mode = *saved_mode;
8448         }
8449
8450 out:
8451         kfree(pipe_config);
8452         kfree(saved_mode);
8453         return ret;
8454 }
8455
8456 int intel_set_mode(struct drm_crtc *crtc,
8457                      struct drm_display_mode *mode,
8458                      int x, int y, struct drm_framebuffer *fb)
8459 {
8460         int ret;
8461
8462         ret = __intel_set_mode(crtc, mode, x, y, fb);
8463
8464         if (ret == 0)
8465                 intel_modeset_check_state(crtc->dev);
8466
8467         return ret;
8468 }
8469
8470 void intel_crtc_restore_mode(struct drm_crtc *crtc)
8471 {
8472         intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->fb);
8473 }
8474
8475 #undef for_each_intel_crtc_masked
8476
8477 static void intel_set_config_free(struct intel_set_config *config)
8478 {
8479         if (!config)
8480                 return;
8481
8482         kfree(config->save_connector_encoders);
8483         kfree(config->save_encoder_crtcs);
8484         kfree(config);
8485 }
8486
8487 static int intel_set_config_save_state(struct drm_device *dev,
8488                                        struct intel_set_config *config)
8489 {
8490         struct drm_encoder *encoder;
8491         struct drm_connector *connector;
8492         int count;
8493
8494         config->save_encoder_crtcs =
8495                 kcalloc(dev->mode_config.num_encoder,
8496                         sizeof(struct drm_crtc *), GFP_KERNEL);
8497         if (!config->save_encoder_crtcs)
8498                 return -ENOMEM;
8499
8500         config->save_connector_encoders =
8501                 kcalloc(dev->mode_config.num_connector,
8502                         sizeof(struct drm_encoder *), GFP_KERNEL);
8503         if (!config->save_connector_encoders)
8504                 return -ENOMEM;
8505
8506         /* Copy data. Note that driver private data is not affected.
8507          * Should anything bad happen only the expected state is
8508          * restored, not the drivers personal bookkeeping.
8509          */
8510         count = 0;
8511         list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
8512                 config->save_encoder_crtcs[count++] = encoder->crtc;
8513         }
8514
8515         count = 0;
8516         list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
8517                 config->save_connector_encoders[count++] = connector->encoder;
8518         }
8519
8520         return 0;
8521 }
8522
8523 static void intel_set_config_restore_state(struct drm_device *dev,
8524                                            struct intel_set_config *config)
8525 {
8526         struct intel_encoder *encoder;
8527         struct intel_connector *connector;
8528         int count;
8529
8530         count = 0;
8531         list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
8532                 encoder->new_crtc =
8533                         to_intel_crtc(config->save_encoder_crtcs[count++]);
8534         }
8535
8536         count = 0;
8537         list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) {
8538                 connector->new_encoder =
8539                         to_intel_encoder(config->save_connector_encoders[count++]);
8540         }
8541 }
8542
8543 static bool
8544 is_crtc_connector_off(struct drm_crtc *crtc, struct drm_connector *connectors,
8545                       int num_connectors)
8546 {
8547         int i;
8548
8549         for (i = 0; i < num_connectors; i++)
8550                 if (connectors[i].encoder &&
8551                     connectors[i].encoder->crtc == crtc &&
8552                     connectors[i].dpms != DRM_MODE_DPMS_ON)
8553                         return true;
8554
8555         return false;
8556 }
8557
8558 static void
8559 intel_set_config_compute_mode_changes(struct drm_mode_set *set,
8560                                       struct intel_set_config *config)
8561 {
8562
8563         /* We should be able to check here if the fb has the same properties
8564          * and then just flip_or_move it */
8565         if (set->connectors != NULL &&
8566             is_crtc_connector_off(set->crtc, *set->connectors,
8567                                   set->num_connectors)) {
8568                         config->mode_changed = true;
8569         } else if (set->crtc->fb != set->fb) {
8570                 /* If we have no fb then treat it as a full mode set */
8571                 if (set->crtc->fb == NULL) {
8572                         DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
8573                         config->mode_changed = true;
8574                 } else if (set->fb == NULL) {
8575                         config->mode_changed = true;
8576                 } else if (set->fb->pixel_format !=
8577                            set->crtc->fb->pixel_format) {
8578                         config->mode_changed = true;
8579                 } else {
8580                         config->fb_changed = true;
8581                 }
8582         }
8583
8584         if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
8585                 config->fb_changed = true;
8586
8587         if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
8588                 DRM_DEBUG_KMS("modes are different, full mode set\n");
8589                 drm_mode_debug_printmodeline(&set->crtc->mode);
8590                 drm_mode_debug_printmodeline(set->mode);
8591                 config->mode_changed = true;
8592         }
8593 }
8594
8595 static int
8596 intel_modeset_stage_output_state(struct drm_device *dev,
8597                                  struct drm_mode_set *set,
8598                                  struct intel_set_config *config)
8599 {
8600         struct drm_crtc *new_crtc;
8601         struct intel_connector *connector;
8602         struct intel_encoder *encoder;
8603         int count, ro;
8604
8605         /* The upper layers ensure that we either disable a crtc or have a list
8606          * of connectors. For paranoia, double-check this. */
8607         WARN_ON(!set->fb && (set->num_connectors != 0));
8608         WARN_ON(set->fb && (set->num_connectors == 0));
8609
8610         count = 0;
8611         list_for_each_entry(connector, &dev->mode_config.connector_list,
8612                             base.head) {
8613                 /* Otherwise traverse passed in connector list and get encoders
8614                  * for them. */
8615                 for (ro = 0; ro < set->num_connectors; ro++) {
8616                         if (set->connectors[ro] == &connector->base) {
8617                                 connector->new_encoder = connector->encoder;
8618                                 break;
8619                         }
8620                 }
8621
8622                 /* If we disable the crtc, disable all its connectors. Also, if
8623                  * the connector is on the changing crtc but not on the new
8624                  * connector list, disable it. */
8625                 if ((!set->fb || ro == set->num_connectors) &&
8626                     connector->base.encoder &&
8627                     connector->base.encoder->crtc == set->crtc) {
8628                         connector->new_encoder = NULL;
8629
8630                         DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
8631                                 connector->base.base.id,
8632                                 drm_get_connector_name(&connector->base));
8633                 }
8634
8635
8636                 if (&connector->new_encoder->base != connector->base.encoder) {
8637                         DRM_DEBUG_KMS("encoder changed, full mode switch\n");
8638                         config->mode_changed = true;
8639                 }
8640         }
8641         /* connector->new_encoder is now updated for all connectors. */
8642
8643         /* Update crtc of enabled connectors. */
8644         count = 0;
8645         list_for_each_entry(connector, &dev->mode_config.connector_list,
8646                             base.head) {
8647                 if (!connector->new_encoder)
8648                         continue;
8649
8650                 new_crtc = connector->new_encoder->base.crtc;
8651
8652                 for (ro = 0; ro < set->num_connectors; ro++) {
8653                         if (set->connectors[ro] == &connector->base)
8654                                 new_crtc = set->crtc;
8655                 }
8656
8657                 /* Make sure the new CRTC will work with the encoder */
8658                 if (!intel_encoder_crtc_ok(&connector->new_encoder->base,
8659                                            new_crtc)) {
8660                         return -EINVAL;
8661                 }
8662                 connector->encoder->new_crtc = to_intel_crtc(new_crtc);
8663
8664                 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
8665                         connector->base.base.id,
8666                         drm_get_connector_name(&connector->base),
8667                         new_crtc->base.id);
8668         }
8669
8670         /* Check for any encoders that needs to be disabled. */
8671         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
8672                             base.head) {
8673                 list_for_each_entry(connector,
8674                                     &dev->mode_config.connector_list,
8675                                     base.head) {
8676                         if (connector->new_encoder == encoder) {
8677                                 WARN_ON(!connector->new_encoder->new_crtc);
8678
8679                                 goto next_encoder;
8680                         }
8681                 }
8682                 encoder->new_crtc = NULL;
8683 next_encoder:
8684                 /* Only now check for crtc changes so we don't miss encoders
8685                  * that will be disabled. */
8686                 if (&encoder->new_crtc->base != encoder->base.crtc) {
8687                         DRM_DEBUG_KMS("crtc changed, full mode switch\n");
8688                         config->mode_changed = true;
8689                 }
8690         }
8691         /* Now we've also updated encoder->new_crtc for all encoders. */
8692
8693         return 0;
8694 }
8695
8696 static int intel_crtc_set_config(struct drm_mode_set *set)
8697 {
8698         struct drm_device *dev;
8699         struct drm_mode_set save_set;
8700         struct intel_set_config *config;
8701         int ret;
8702
8703         BUG_ON(!set);
8704         BUG_ON(!set->crtc);
8705         BUG_ON(!set->crtc->helper_private);
8706
8707         /* Enforce sane interface api - has been abused by the fb helper. */
8708         BUG_ON(!set->mode && set->fb);
8709         BUG_ON(set->fb && set->num_connectors == 0);
8710
8711         if (set->fb) {
8712                 DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
8713                                 set->crtc->base.id, set->fb->base.id,
8714                                 (int)set->num_connectors, set->x, set->y);
8715         } else {
8716                 DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
8717         }
8718
8719         dev = set->crtc->dev;
8720
8721         ret = -ENOMEM;
8722         config = kzalloc(sizeof(*config), GFP_KERNEL);
8723         if (!config)
8724                 goto out_config;
8725
8726         ret = intel_set_config_save_state(dev, config);
8727         if (ret)
8728                 goto out_config;
8729
8730         save_set.crtc = set->crtc;
8731         save_set.mode = &set->crtc->mode;
8732         save_set.x = set->crtc->x;
8733         save_set.y = set->crtc->y;
8734         save_set.fb = set->crtc->fb;
8735
8736         /* Compute whether we need a full modeset, only an fb base update or no
8737          * change at all. In the future we might also check whether only the
8738          * mode changed, e.g. for LVDS where we only change the panel fitter in
8739          * such cases. */
8740         intel_set_config_compute_mode_changes(set, config);
8741
8742         ret = intel_modeset_stage_output_state(dev, set, config);
8743         if (ret)
8744                 goto fail;
8745
8746         if (config->mode_changed) {
8747                 ret = intel_set_mode(set->crtc, set->mode,
8748                                      set->x, set->y, set->fb);
8749         } else if (config->fb_changed) {
8750                 intel_crtc_wait_for_pending_flips(set->crtc);
8751
8752                 ret = intel_pipe_set_base(set->crtc,
8753                                           set->x, set->y, set->fb);
8754         }
8755
8756         if (ret) {
8757                 DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
8758                               set->crtc->base.id, ret);
8759 fail:
8760                 intel_set_config_restore_state(dev, config);
8761
8762                 /* Try to restore the config */
8763                 if (config->mode_changed &&
8764                     intel_set_mode(save_set.crtc, save_set.mode,
8765                                    save_set.x, save_set.y, save_set.fb))
8766                         DRM_ERROR("failed to restore config after modeset failure\n");
8767         }
8768
8769 out_config:
8770         intel_set_config_free(config);
8771         return ret;
8772 }
8773
8774 static const struct drm_crtc_funcs intel_crtc_funcs = {
8775         .cursor_set = intel_crtc_cursor_set,
8776         .cursor_move = intel_crtc_cursor_move,
8777         .gamma_set = intel_crtc_gamma_set,
8778         .set_config = intel_crtc_set_config,
8779         .destroy = intel_crtc_destroy,
8780         .page_flip = intel_crtc_page_flip,
8781 };
8782
8783 static void intel_cpu_pll_init(struct drm_device *dev)
8784 {
8785         if (HAS_DDI(dev))
8786                 intel_ddi_pll_init(dev);
8787 }
8788
8789 static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
8790                                       struct intel_shared_dpll *pll,
8791                                       struct intel_dpll_hw_state *hw_state)
8792 {
8793         uint32_t val;
8794
8795         val = I915_READ(PCH_DPLL(pll->id));
8796         hw_state->dpll = val;
8797         hw_state->fp0 = I915_READ(PCH_FP0(pll->id));
8798         hw_state->fp1 = I915_READ(PCH_FP1(pll->id));
8799
8800         return val & DPLL_VCO_ENABLE;
8801 }
8802
8803 static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv,
8804                                 struct intel_shared_dpll *pll)
8805 {
8806         uint32_t reg, val;
8807
8808         /* PCH refclock must be enabled first */
8809         assert_pch_refclk_enabled(dev_priv);
8810
8811         reg = PCH_DPLL(pll->id);
8812         val = I915_READ(reg);
8813         val |= DPLL_VCO_ENABLE;
8814         I915_WRITE(reg, val);
8815         POSTING_READ(reg);
8816         udelay(200);
8817 }
8818
8819 static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv,
8820                                  struct intel_shared_dpll *pll)
8821 {
8822         struct drm_device *dev = dev_priv->dev;
8823         struct intel_crtc *crtc;
8824         uint32_t reg, val;
8825
8826         /* Make sure no transcoder isn't still depending on us. */
8827         list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
8828                 if (intel_crtc_to_shared_dpll(crtc) == pll)
8829                         assert_pch_transcoder_disabled(dev_priv, crtc->pipe);
8830         }
8831
8832         reg = PCH_DPLL(pll->id);
8833         val = I915_READ(reg);
8834         val &= ~DPLL_VCO_ENABLE;
8835         I915_WRITE(reg, val);
8836         POSTING_READ(reg);
8837         udelay(200);
8838 }
8839
8840 static char *ibx_pch_dpll_names[] = {
8841         "PCH DPLL A",
8842         "PCH DPLL B",
8843 };
8844
8845 static void ibx_pch_dpll_init(struct drm_device *dev)
8846 {
8847         struct drm_i915_private *dev_priv = dev->dev_private;
8848         int i;
8849
8850         dev_priv->num_shared_dpll = 2;
8851
8852         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
8853                 dev_priv->shared_dplls[i].id = i;
8854                 dev_priv->shared_dplls[i].name = ibx_pch_dpll_names[i];
8855                 dev_priv->shared_dplls[i].enable = ibx_pch_dpll_enable;
8856                 dev_priv->shared_dplls[i].disable = ibx_pch_dpll_disable;
8857                 dev_priv->shared_dplls[i].get_hw_state =
8858                         ibx_pch_dpll_get_hw_state;
8859         }
8860 }
8861
8862 static void intel_shared_dpll_init(struct drm_device *dev)
8863 {
8864         struct drm_i915_private *dev_priv = dev->dev_private;
8865
8866         if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
8867                 ibx_pch_dpll_init(dev);
8868         else
8869                 dev_priv->num_shared_dpll = 0;
8870
8871         BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS);
8872         DRM_DEBUG_KMS("%i shared PLLs initialized\n",
8873                       dev_priv->num_shared_dpll);
8874 }
8875
8876 static void intel_crtc_init(struct drm_device *dev, int pipe)
8877 {
8878         drm_i915_private_t *dev_priv = dev->dev_private;
8879         struct intel_crtc *intel_crtc;
8880         int i;
8881
8882         intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
8883         if (intel_crtc == NULL)
8884                 return;
8885
8886         drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
8887
8888         drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
8889         for (i = 0; i < 256; i++) {
8890                 intel_crtc->lut_r[i] = i;
8891                 intel_crtc->lut_g[i] = i;
8892                 intel_crtc->lut_b[i] = i;
8893         }
8894
8895         /* Swap pipes & planes for FBC on pre-965 */
8896         intel_crtc->pipe = pipe;
8897         intel_crtc->plane = pipe;
8898         if (IS_MOBILE(dev) && IS_GEN3(dev)) {
8899                 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
8900                 intel_crtc->plane = !pipe;
8901         }
8902
8903         BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
8904                dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
8905         dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
8906         dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
8907
8908         drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
8909 }
8910
8911 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
8912                                 struct drm_file *file)
8913 {
8914         struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
8915         struct drm_mode_object *drmmode_obj;
8916         struct intel_crtc *crtc;
8917
8918         if (!drm_core_check_feature(dev, DRIVER_MODESET))
8919                 return -ENODEV;
8920
8921         drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
8922                         DRM_MODE_OBJECT_CRTC);
8923
8924         if (!drmmode_obj) {
8925                 DRM_ERROR("no such CRTC id\n");
8926                 return -EINVAL;
8927         }
8928
8929         crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
8930         pipe_from_crtc_id->pipe = crtc->pipe;
8931
8932         return 0;
8933 }
8934
8935 static int intel_encoder_clones(struct intel_encoder *encoder)
8936 {
8937         struct drm_device *dev = encoder->base.dev;
8938         struct intel_encoder *source_encoder;
8939         int index_mask = 0;
8940         int entry = 0;
8941
8942         list_for_each_entry(source_encoder,
8943                             &dev->mode_config.encoder_list, base.head) {
8944
8945                 if (encoder == source_encoder)
8946                         index_mask |= (1 << entry);
8947
8948                 /* Intel hw has only one MUX where enocoders could be cloned. */
8949                 if (encoder->cloneable && source_encoder->cloneable)
8950                         index_mask |= (1 << entry);
8951
8952                 entry++;
8953         }
8954
8955         return index_mask;
8956 }
8957
8958 static bool has_edp_a(struct drm_device *dev)
8959 {
8960         struct drm_i915_private *dev_priv = dev->dev_private;
8961
8962         if (!IS_MOBILE(dev))
8963                 return false;
8964
8965         if ((I915_READ(DP_A) & DP_DETECTED) == 0)
8966                 return false;
8967
8968         if (IS_GEN5(dev) &&
8969             (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
8970                 return false;
8971
8972         return true;
8973 }
8974
8975 static void intel_setup_outputs(struct drm_device *dev)
8976 {
8977         struct drm_i915_private *dev_priv = dev->dev_private;
8978         struct intel_encoder *encoder;
8979         bool dpd_is_edp = false;
8980
8981         intel_lvds_init(dev);
8982
8983         if (!IS_ULT(dev))
8984                 intel_crt_init(dev);
8985
8986         if (HAS_DDI(dev)) {
8987                 int found;
8988
8989                 /* Haswell uses DDI functions to detect digital outputs */
8990                 found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED;
8991                 /* DDI A only supports eDP */
8992                 if (found)
8993                         intel_ddi_init(dev, PORT_A);
8994
8995                 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
8996                  * register */
8997                 found = I915_READ(SFUSE_STRAP);
8998
8999                 if (found & SFUSE_STRAP_DDIB_DETECTED)
9000                         intel_ddi_init(dev, PORT_B);
9001                 if (found & SFUSE_STRAP_DDIC_DETECTED)
9002                         intel_ddi_init(dev, PORT_C);
9003                 if (found & SFUSE_STRAP_DDID_DETECTED)
9004                         intel_ddi_init(dev, PORT_D);
9005         } else if (HAS_PCH_SPLIT(dev)) {
9006                 int found;
9007                 dpd_is_edp = intel_dpd_is_edp(dev);
9008
9009                 if (has_edp_a(dev))
9010                         intel_dp_init(dev, DP_A, PORT_A);
9011
9012                 if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
9013                         /* PCH SDVOB multiplex with HDMIB */
9014                         found = intel_sdvo_init(dev, PCH_SDVOB, true);
9015                         if (!found)
9016                                 intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
9017                         if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
9018                                 intel_dp_init(dev, PCH_DP_B, PORT_B);
9019                 }
9020
9021                 if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
9022                         intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
9023
9024                 if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
9025                         intel_hdmi_init(dev, PCH_HDMID, PORT_D);
9026
9027                 if (I915_READ(PCH_DP_C) & DP_DETECTED)
9028                         intel_dp_init(dev, PCH_DP_C, PORT_C);
9029
9030                 if (I915_READ(PCH_DP_D) & DP_DETECTED)
9031                         intel_dp_init(dev, PCH_DP_D, PORT_D);
9032         } else if (IS_VALLEYVIEW(dev)) {
9033                 /* Check for built-in panel first. Shares lanes with HDMI on SDVOC */
9034                 if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED)
9035                         intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
9036
9037                 if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED) {
9038                         intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB,
9039                                         PORT_B);
9040                         if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED)
9041                                 intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
9042                 }
9043         } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
9044                 bool found = false;
9045
9046                 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
9047                         DRM_DEBUG_KMS("probing SDVOB\n");
9048                         found = intel_sdvo_init(dev, GEN3_SDVOB, true);
9049                         if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
9050                                 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
9051                                 intel_hdmi_init(dev, GEN4_HDMIB, PORT_B);
9052                         }
9053
9054                         if (!found && SUPPORTS_INTEGRATED_DP(dev))
9055                                 intel_dp_init(dev, DP_B, PORT_B);
9056                 }
9057
9058                 /* Before G4X SDVOC doesn't have its own detect register */
9059
9060                 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
9061                         DRM_DEBUG_KMS("probing SDVOC\n");
9062                         found = intel_sdvo_init(dev, GEN3_SDVOC, false);
9063                 }
9064
9065                 if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
9066
9067                         if (SUPPORTS_INTEGRATED_HDMI(dev)) {
9068                                 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
9069                                 intel_hdmi_init(dev, GEN4_HDMIC, PORT_C);
9070                         }
9071                         if (SUPPORTS_INTEGRATED_DP(dev))
9072                                 intel_dp_init(dev, DP_C, PORT_C);
9073                 }
9074
9075                 if (SUPPORTS_INTEGRATED_DP(dev) &&
9076                     (I915_READ(DP_D) & DP_DETECTED))
9077                         intel_dp_init(dev, DP_D, PORT_D);
9078         } else if (IS_GEN2(dev))
9079                 intel_dvo_init(dev);
9080
9081         if (SUPPORTS_TV(dev))
9082                 intel_tv_init(dev);
9083
9084         list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
9085                 encoder->base.possible_crtcs = encoder->crtc_mask;
9086                 encoder->base.possible_clones =
9087                         intel_encoder_clones(encoder);
9088         }
9089
9090         intel_init_pch_refclk(dev);
9091
9092         drm_helper_move_panel_connectors_to_head(dev);
9093 }
9094
9095 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
9096 {
9097         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
9098
9099         drm_framebuffer_cleanup(fb);
9100         drm_gem_object_unreference_unlocked(&intel_fb->obj->base);
9101
9102         kfree(intel_fb);
9103 }
9104
9105 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
9106                                                 struct drm_file *file,
9107                                                 unsigned int *handle)
9108 {
9109         struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
9110         struct drm_i915_gem_object *obj = intel_fb->obj;
9111
9112         return drm_gem_handle_create(file, &obj->base, handle);
9113 }
9114
9115 static const struct drm_framebuffer_funcs intel_fb_funcs = {
9116         .destroy = intel_user_framebuffer_destroy,
9117         .create_handle = intel_user_framebuffer_create_handle,
9118 };
9119
9120 int intel_framebuffer_init(struct drm_device *dev,
9121                            struct intel_framebuffer *intel_fb,
9122                            struct drm_mode_fb_cmd2 *mode_cmd,
9123                            struct drm_i915_gem_object *obj)
9124 {
9125         int pitch_limit;
9126         int ret;
9127
9128         if (obj->tiling_mode == I915_TILING_Y) {
9129                 DRM_DEBUG("hardware does not support tiling Y\n");
9130                 return -EINVAL;
9131         }
9132
9133         if (mode_cmd->pitches[0] & 63) {
9134                 DRM_DEBUG("pitch (%d) must be at least 64 byte aligned\n",
9135                           mode_cmd->pitches[0]);
9136                 return -EINVAL;
9137         }
9138
9139         if (INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev)) {
9140                 pitch_limit = 32*1024;
9141         } else if (INTEL_INFO(dev)->gen >= 4) {
9142                 if (obj->tiling_mode)
9143                         pitch_limit = 16*1024;
9144                 else
9145                         pitch_limit = 32*1024;
9146         } else if (INTEL_INFO(dev)->gen >= 3) {
9147                 if (obj->tiling_mode)
9148                         pitch_limit = 8*1024;
9149                 else
9150                         pitch_limit = 16*1024;
9151         } else
9152                 /* XXX DSPC is limited to 4k tiled */
9153                 pitch_limit = 8*1024;
9154
9155         if (mode_cmd->pitches[0] > pitch_limit) {
9156                 DRM_DEBUG("%s pitch (%d) must be at less than %d\n",
9157                           obj->tiling_mode ? "tiled" : "linear",
9158                           mode_cmd->pitches[0], pitch_limit);
9159                 return -EINVAL;
9160         }
9161
9162         if (obj->tiling_mode != I915_TILING_NONE &&
9163             mode_cmd->pitches[0] != obj->stride) {
9164                 DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
9165                           mode_cmd->pitches[0], obj->stride);
9166                 return -EINVAL;
9167         }
9168
9169         /* Reject formats not supported by any plane early. */
9170         switch (mode_cmd->pixel_format) {
9171         case DRM_FORMAT_C8:
9172         case DRM_FORMAT_RGB565:
9173         case DRM_FORMAT_XRGB8888:
9174         case DRM_FORMAT_ARGB8888:
9175                 break;
9176         case DRM_FORMAT_XRGB1555:
9177         case DRM_FORMAT_ARGB1555:
9178                 if (INTEL_INFO(dev)->gen > 3) {
9179                         DRM_DEBUG("unsupported pixel format: %s\n",
9180                                   drm_get_format_name(mode_cmd->pixel_format));
9181                         return -EINVAL;
9182                 }
9183                 break;
9184         case DRM_FORMAT_XBGR8888:
9185         case DRM_FORMAT_ABGR8888:
9186         case DRM_FORMAT_XRGB2101010:
9187         case DRM_FORMAT_ARGB2101010:
9188         case DRM_FORMAT_XBGR2101010:
9189         case DRM_FORMAT_ABGR2101010:
9190                 if (INTEL_INFO(dev)->gen < 4) {
9191                         DRM_DEBUG("unsupported pixel format: %s\n",
9192                                   drm_get_format_name(mode_cmd->pixel_format));
9193                         return -EINVAL;
9194                 }
9195                 break;
9196         case DRM_FORMAT_YUYV:
9197         case DRM_FORMAT_UYVY:
9198         case DRM_FORMAT_YVYU:
9199         case DRM_FORMAT_VYUY:
9200                 if (INTEL_INFO(dev)->gen < 5) {
9201                         DRM_DEBUG("unsupported pixel format: %s\n",
9202                                   drm_get_format_name(mode_cmd->pixel_format));
9203                         return -EINVAL;
9204                 }
9205                 break;
9206         default:
9207                 DRM_DEBUG("unsupported pixel format: %s\n",
9208                           drm_get_format_name(mode_cmd->pixel_format));
9209                 return -EINVAL;
9210         }
9211
9212         /* FIXME need to adjust LINOFF/TILEOFF accordingly. */
9213         if (mode_cmd->offsets[0] != 0)
9214                 return -EINVAL;
9215
9216         drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
9217         intel_fb->obj = obj;
9218
9219         ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
9220         if (ret) {
9221                 DRM_ERROR("framebuffer init failed %d\n", ret);
9222                 return ret;
9223         }
9224
9225         return 0;
9226 }
9227
9228 static struct drm_framebuffer *
9229 intel_user_framebuffer_create(struct drm_device *dev,
9230                               struct drm_file *filp,
9231                               struct drm_mode_fb_cmd2 *mode_cmd)
9232 {
9233         struct drm_i915_gem_object *obj;
9234
9235         obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
9236                                                 mode_cmd->handles[0]));
9237         if (&obj->base == NULL)
9238                 return ERR_PTR(-ENOENT);
9239
9240         return intel_framebuffer_create(dev, mode_cmd, obj);
9241 }
9242
9243 static const struct drm_mode_config_funcs intel_mode_funcs = {
9244         .fb_create = intel_user_framebuffer_create,
9245         .output_poll_changed = intel_fb_output_poll_changed,
9246 };
9247
9248 /* Set up chip specific display functions */
9249 static void intel_init_display(struct drm_device *dev)
9250 {
9251         struct drm_i915_private *dev_priv = dev->dev_private;
9252
9253         if (HAS_PCH_SPLIT(dev) || IS_G4X(dev))
9254                 dev_priv->display.find_dpll = g4x_find_best_dpll;
9255         else if (IS_VALLEYVIEW(dev))
9256                 dev_priv->display.find_dpll = vlv_find_best_dpll;
9257         else if (IS_PINEVIEW(dev))
9258                 dev_priv->display.find_dpll = pnv_find_best_dpll;
9259         else
9260                 dev_priv->display.find_dpll = i9xx_find_best_dpll;
9261
9262         if (HAS_DDI(dev)) {
9263                 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
9264                 dev_priv->display.crtc_mode_set = haswell_crtc_mode_set;
9265                 dev_priv->display.crtc_enable = haswell_crtc_enable;
9266                 dev_priv->display.crtc_disable = haswell_crtc_disable;
9267                 dev_priv->display.off = haswell_crtc_off;
9268                 dev_priv->display.update_plane = ironlake_update_plane;
9269         } else if (HAS_PCH_SPLIT(dev)) {
9270                 dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
9271                 dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
9272                 dev_priv->display.crtc_enable = ironlake_crtc_enable;
9273                 dev_priv->display.crtc_disable = ironlake_crtc_disable;
9274                 dev_priv->display.off = ironlake_crtc_off;
9275                 dev_priv->display.update_plane = ironlake_update_plane;
9276         } else if (IS_VALLEYVIEW(dev)) {
9277                 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
9278                 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
9279                 dev_priv->display.crtc_enable = valleyview_crtc_enable;
9280                 dev_priv->display.crtc_disable = i9xx_crtc_disable;
9281                 dev_priv->display.off = i9xx_crtc_off;
9282                 dev_priv->display.update_plane = i9xx_update_plane;
9283         } else {
9284                 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
9285                 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
9286                 dev_priv->display.crtc_enable = i9xx_crtc_enable;
9287                 dev_priv->display.crtc_disable = i9xx_crtc_disable;
9288                 dev_priv->display.off = i9xx_crtc_off;
9289                 dev_priv->display.update_plane = i9xx_update_plane;
9290         }
9291
9292         /* Returns the core display clock speed */
9293         if (IS_VALLEYVIEW(dev))
9294                 dev_priv->display.get_display_clock_speed =
9295                         valleyview_get_display_clock_speed;
9296         else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
9297                 dev_priv->display.get_display_clock_speed =
9298                         i945_get_display_clock_speed;
9299         else if (IS_I915G(dev))
9300                 dev_priv->display.get_display_clock_speed =
9301                         i915_get_display_clock_speed;
9302         else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev))
9303                 dev_priv->display.get_display_clock_speed =
9304                         i9xx_misc_get_display_clock_speed;
9305         else if (IS_I915GM(dev))
9306                 dev_priv->display.get_display_clock_speed =
9307                         i915gm_get_display_clock_speed;
9308         else if (IS_I865G(dev))
9309                 dev_priv->display.get_display_clock_speed =
9310                         i865_get_display_clock_speed;
9311         else if (IS_I85X(dev))
9312                 dev_priv->display.get_display_clock_speed =
9313                         i855_get_display_clock_speed;
9314         else /* 852, 830 */
9315                 dev_priv->display.get_display_clock_speed =
9316                         i830_get_display_clock_speed;
9317
9318         if (HAS_PCH_SPLIT(dev)) {
9319                 if (IS_GEN5(dev)) {
9320                         dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
9321                         dev_priv->display.write_eld = ironlake_write_eld;
9322                 } else if (IS_GEN6(dev)) {
9323                         dev_priv->display.fdi_link_train = gen6_fdi_link_train;
9324                         dev_priv->display.write_eld = ironlake_write_eld;
9325                 } else if (IS_IVYBRIDGE(dev)) {
9326                         /* FIXME: detect B0+ stepping and use auto training */
9327                         dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
9328                         dev_priv->display.write_eld = ironlake_write_eld;
9329                         dev_priv->display.modeset_global_resources =
9330                                 ivb_modeset_global_resources;
9331                 } else if (IS_HASWELL(dev)) {
9332                         dev_priv->display.fdi_link_train = hsw_fdi_link_train;
9333                         dev_priv->display.write_eld = haswell_write_eld;
9334                         dev_priv->display.modeset_global_resources =
9335                                 haswell_modeset_global_resources;
9336                 }
9337         } else if (IS_G4X(dev)) {
9338                 dev_priv->display.write_eld = g4x_write_eld;
9339         }
9340
9341         /* Default just returns -ENODEV to indicate unsupported */
9342         dev_priv->display.queue_flip = intel_default_queue_flip;
9343
9344         switch (INTEL_INFO(dev)->gen) {
9345         case 2:
9346                 dev_priv->display.queue_flip = intel_gen2_queue_flip;
9347                 break;
9348
9349         case 3:
9350                 dev_priv->display.queue_flip = intel_gen3_queue_flip;
9351                 break;
9352
9353         case 4:
9354         case 5:
9355                 dev_priv->display.queue_flip = intel_gen4_queue_flip;
9356                 break;
9357
9358         case 6:
9359                 dev_priv->display.queue_flip = intel_gen6_queue_flip;
9360                 break;
9361         case 7:
9362                 dev_priv->display.queue_flip = intel_gen7_queue_flip;
9363                 break;
9364         }
9365 }
9366
9367 /*
9368  * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
9369  * resume, or other times.  This quirk makes sure that's the case for
9370  * affected systems.
9371  */
9372 static void quirk_pipea_force(struct drm_device *dev)
9373 {
9374         struct drm_i915_private *dev_priv = dev->dev_private;
9375
9376         dev_priv->quirks |= QUIRK_PIPEA_FORCE;
9377         DRM_INFO("applying pipe a force quirk\n");
9378 }
9379
9380 /*
9381  * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
9382  */
9383 static void quirk_ssc_force_disable(struct drm_device *dev)
9384 {
9385         struct drm_i915_private *dev_priv = dev->dev_private;
9386         dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
9387         DRM_INFO("applying lvds SSC disable quirk\n");
9388 }
9389
9390 /*
9391  * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
9392  * brightness value
9393  */
9394 static void quirk_invert_brightness(struct drm_device *dev)
9395 {
9396         struct drm_i915_private *dev_priv = dev->dev_private;
9397         dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
9398         DRM_INFO("applying inverted panel brightness quirk\n");
9399 }
9400
9401 struct intel_quirk {
9402         int device;
9403         int subsystem_vendor;
9404         int subsystem_device;
9405         void (*hook)(struct drm_device *dev);
9406 };
9407
9408 /* For systems that don't have a meaningful PCI subdevice/subvendor ID */
9409 struct intel_dmi_quirk {
9410         void (*hook)(struct drm_device *dev);
9411         const struct dmi_system_id (*dmi_id_list)[];
9412 };
9413
9414 static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
9415 {
9416         DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
9417         return 1;
9418 }
9419
9420 static const struct intel_dmi_quirk intel_dmi_quirks[] = {
9421         {
9422                 .dmi_id_list = &(const struct dmi_system_id[]) {
9423                         {
9424                                 .callback = intel_dmi_reverse_brightness,
9425                                 .ident = "NCR Corporation",
9426                                 .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
9427                                             DMI_MATCH(DMI_PRODUCT_NAME, ""),
9428                                 },
9429                         },
9430                         { }  /* terminating entry */
9431                 },
9432                 .hook = quirk_invert_brightness,
9433         },
9434 };
9435
9436 static struct intel_quirk intel_quirks[] = {
9437         /* HP Mini needs pipe A force quirk (LP: #322104) */
9438         { 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
9439
9440         /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
9441         { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
9442
9443         /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
9444         { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
9445
9446         /* 830/845 need to leave pipe A & dpll A up */
9447         { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
9448         { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
9449
9450         /* Lenovo U160 cannot use SSC on LVDS */
9451         { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
9452
9453         /* Sony Vaio Y cannot use SSC on LVDS */
9454         { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
9455
9456         /* Acer Aspire 5734Z must invert backlight brightness */
9457         { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
9458
9459         /* Acer/eMachines G725 */
9460         { 0x2a42, 0x1025, 0x0210, quirk_invert_brightness },
9461
9462         /* Acer/eMachines e725 */
9463         { 0x2a42, 0x1025, 0x0212, quirk_invert_brightness },
9464
9465         /* Acer/Packard Bell NCL20 */
9466         { 0x2a42, 0x1025, 0x034b, quirk_invert_brightness },
9467
9468         /* Acer Aspire 4736Z */
9469         { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
9470 };
9471
9472 static void intel_init_quirks(struct drm_device *dev)
9473 {
9474         struct pci_dev *d = dev->pdev;
9475         int i;
9476
9477         for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
9478                 struct intel_quirk *q = &intel_quirks[i];
9479
9480                 if (d->device == q->device &&
9481                     (d->subsystem_vendor == q->subsystem_vendor ||
9482                      q->subsystem_vendor == PCI_ANY_ID) &&
9483                     (d->subsystem_device == q->subsystem_device ||
9484                      q->subsystem_device == PCI_ANY_ID))
9485                         q->hook(dev);
9486         }
9487         for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
9488                 if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
9489                         intel_dmi_quirks[i].hook(dev);
9490         }
9491 }
9492
9493 /* Disable the VGA plane that we never use */
9494 static void i915_disable_vga(struct drm_device *dev)
9495 {
9496         struct drm_i915_private *dev_priv = dev->dev_private;
9497         u8 sr1;
9498         u32 vga_reg = i915_vgacntrl_reg(dev);
9499
9500         vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
9501         outb(SR01, VGA_SR_INDEX);
9502         sr1 = inb(VGA_SR_DATA);
9503         outb(sr1 | 1<<5, VGA_SR_DATA);
9504         vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
9505         udelay(300);
9506
9507         I915_WRITE(vga_reg, VGA_DISP_DISABLE);
9508         POSTING_READ(vga_reg);
9509 }
9510
9511 void intel_modeset_init_hw(struct drm_device *dev)
9512 {
9513         intel_init_power_well(dev);
9514
9515         intel_prepare_ddi(dev);
9516
9517         intel_init_clock_gating(dev);
9518
9519         mutex_lock(&dev->struct_mutex);
9520         intel_enable_gt_powersave(dev);
9521         mutex_unlock(&dev->struct_mutex);
9522 }
9523
9524 void intel_modeset_suspend_hw(struct drm_device *dev)
9525 {
9526         intel_suspend_hw(dev);
9527 }
9528
9529 void intel_modeset_init(struct drm_device *dev)
9530 {
9531         struct drm_i915_private *dev_priv = dev->dev_private;
9532         int i, j, ret;
9533
9534         drm_mode_config_init(dev);
9535
9536         dev->mode_config.min_width = 0;
9537         dev->mode_config.min_height = 0;
9538
9539         dev->mode_config.preferred_depth = 24;
9540         dev->mode_config.prefer_shadow = 1;
9541
9542         dev->mode_config.funcs = &intel_mode_funcs;
9543
9544         intel_init_quirks(dev);
9545
9546         intel_init_pm(dev);
9547
9548         if (INTEL_INFO(dev)->num_pipes == 0)
9549                 return;
9550
9551         intel_init_display(dev);
9552
9553         if (IS_GEN2(dev)) {
9554                 dev->mode_config.max_width = 2048;
9555                 dev->mode_config.max_height = 2048;
9556         } else if (IS_GEN3(dev)) {
9557                 dev->mode_config.max_width = 4096;
9558                 dev->mode_config.max_height = 4096;
9559         } else {
9560                 dev->mode_config.max_width = 8192;
9561                 dev->mode_config.max_height = 8192;
9562         }
9563         dev->mode_config.fb_base = dev_priv->gtt.mappable_base;
9564
9565         DRM_DEBUG_KMS("%d display pipe%s available.\n",
9566                       INTEL_INFO(dev)->num_pipes,
9567                       INTEL_INFO(dev)->num_pipes > 1 ? "s" : "");
9568
9569         for (i = 0; i < INTEL_INFO(dev)->num_pipes; i++) {
9570                 intel_crtc_init(dev, i);
9571                 for (j = 0; j < dev_priv->num_plane; j++) {
9572                         ret = intel_plane_init(dev, i, j);
9573                         if (ret)
9574                                 DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n",
9575                                               pipe_name(i), sprite_name(i, j), ret);
9576                 }
9577         }
9578
9579         intel_cpu_pll_init(dev);
9580         intel_shared_dpll_init(dev);
9581
9582         /* Just disable it once at startup */
9583         i915_disable_vga(dev);
9584         intel_setup_outputs(dev);
9585
9586         /* Just in case the BIOS is doing something questionable. */
9587         intel_disable_fbc(dev);
9588 }
9589
9590 static void
9591 intel_connector_break_all_links(struct intel_connector *connector)
9592 {
9593         connector->base.dpms = DRM_MODE_DPMS_OFF;
9594         connector->base.encoder = NULL;
9595         connector->encoder->connectors_active = false;
9596         connector->encoder->base.crtc = NULL;
9597 }
9598
9599 static void intel_enable_pipe_a(struct drm_device *dev)
9600 {
9601         struct intel_connector *connector;
9602         struct drm_connector *crt = NULL;
9603         struct intel_load_detect_pipe load_detect_temp;
9604
9605         /* We can't just switch on the pipe A, we need to set things up with a
9606          * proper mode and output configuration. As a gross hack, enable pipe A
9607          * by enabling the load detect pipe once. */
9608         list_for_each_entry(connector,
9609                             &dev->mode_config.connector_list,
9610                             base.head) {
9611                 if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
9612                         crt = &connector->base;
9613                         break;
9614                 }
9615         }
9616
9617         if (!crt)
9618                 return;
9619
9620         if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp))
9621                 intel_release_load_detect_pipe(crt, &load_detect_temp);
9622
9623
9624 }
9625
9626 static bool
9627 intel_check_plane_mapping(struct intel_crtc *crtc)
9628 {
9629         struct drm_device *dev = crtc->base.dev;
9630         struct drm_i915_private *dev_priv = dev->dev_private;
9631         u32 reg, val;
9632
9633         if (INTEL_INFO(dev)->num_pipes == 1)
9634                 return true;
9635
9636         reg = DSPCNTR(!crtc->plane);
9637         val = I915_READ(reg);
9638
9639         if ((val & DISPLAY_PLANE_ENABLE) &&
9640             (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
9641                 return false;
9642
9643         return true;
9644 }
9645
9646 static void intel_sanitize_crtc(struct intel_crtc *crtc)
9647 {
9648         struct drm_device *dev = crtc->base.dev;
9649         struct drm_i915_private *dev_priv = dev->dev_private;
9650         u32 reg;
9651
9652         /* Clear any frame start delays used for debugging left by the BIOS */
9653         reg = PIPECONF(crtc->config.cpu_transcoder);
9654         I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
9655
9656         /* We need to sanitize the plane -> pipe mapping first because this will
9657          * disable the crtc (and hence change the state) if it is wrong. Note
9658          * that gen4+ has a fixed plane -> pipe mapping.  */
9659         if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) {
9660                 struct intel_connector *connector;
9661                 bool plane;
9662
9663                 DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n",
9664                               crtc->base.base.id);
9665
9666                 /* Pipe has the wrong plane attached and the plane is active.
9667                  * Temporarily change the plane mapping and disable everything
9668                  * ...  */
9669                 plane = crtc->plane;
9670                 crtc->plane = !plane;
9671                 dev_priv->display.crtc_disable(&crtc->base);
9672                 crtc->plane = plane;
9673
9674                 /* ... and break all links. */
9675                 list_for_each_entry(connector, &dev->mode_config.connector_list,
9676                                     base.head) {
9677                         if (connector->encoder->base.crtc != &crtc->base)
9678                                 continue;
9679
9680                         intel_connector_break_all_links(connector);
9681                 }
9682
9683                 WARN_ON(crtc->active);
9684                 crtc->base.enabled = false;
9685         }
9686
9687         if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
9688             crtc->pipe == PIPE_A && !crtc->active) {
9689                 /* BIOS forgot to enable pipe A, this mostly happens after
9690                  * resume. Force-enable the pipe to fix this, the update_dpms
9691                  * call below we restore the pipe to the right state, but leave
9692                  * the required bits on. */
9693                 intel_enable_pipe_a(dev);
9694         }
9695
9696         /* Adjust the state of the output pipe according to whether we
9697          * have active connectors/encoders. */
9698         intel_crtc_update_dpms(&crtc->base);
9699
9700         if (crtc->active != crtc->base.enabled) {
9701                 struct intel_encoder *encoder;
9702
9703                 /* This can happen either due to bugs in the get_hw_state
9704                  * functions or because the pipe is force-enabled due to the
9705                  * pipe A quirk. */
9706                 DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n",
9707                               crtc->base.base.id,
9708                               crtc->base.enabled ? "enabled" : "disabled",
9709                               crtc->active ? "enabled" : "disabled");
9710
9711                 crtc->base.enabled = crtc->active;
9712
9713                 /* Because we only establish the connector -> encoder ->
9714                  * crtc links if something is active, this means the
9715                  * crtc is now deactivated. Break the links. connector
9716                  * -> encoder links are only establish when things are
9717                  *  actually up, hence no need to break them. */
9718                 WARN_ON(crtc->active);
9719
9720                 for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
9721                         WARN_ON(encoder->connectors_active);
9722                         encoder->base.crtc = NULL;
9723                 }
9724         }
9725 }
9726
9727 static void intel_sanitize_encoder(struct intel_encoder *encoder)
9728 {
9729         struct intel_connector *connector;
9730         struct drm_device *dev = encoder->base.dev;
9731
9732         /* We need to check both for a crtc link (meaning that the
9733          * encoder is active and trying to read from a pipe) and the
9734          * pipe itself being active. */
9735         bool has_active_crtc = encoder->base.crtc &&
9736                 to_intel_crtc(encoder->base.crtc)->active;
9737
9738         if (encoder->connectors_active && !has_active_crtc) {
9739                 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
9740                               encoder->base.base.id,
9741                               drm_get_encoder_name(&encoder->base));
9742
9743                 /* Connector is active, but has no active pipe. This is
9744                  * fallout from our resume register restoring. Disable
9745                  * the encoder manually again. */
9746                 if (encoder->base.crtc) {
9747                         DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
9748                                       encoder->base.base.id,
9749                                       drm_get_encoder_name(&encoder->base));
9750                         encoder->disable(encoder);
9751                 }
9752
9753                 /* Inconsistent output/port/pipe state happens presumably due to
9754                  * a bug in one of the get_hw_state functions. Or someplace else
9755                  * in our code, like the register restore mess on resume. Clamp
9756                  * things to off as a safer default. */
9757                 list_for_each_entry(connector,
9758                                     &dev->mode_config.connector_list,
9759                                     base.head) {
9760                         if (connector->encoder != encoder)
9761                                 continue;
9762
9763                         intel_connector_break_all_links(connector);
9764                 }
9765         }
9766         /* Enabled encoders without active connectors will be fixed in
9767          * the crtc fixup. */
9768 }
9769
9770 void i915_redisable_vga(struct drm_device *dev)
9771 {
9772         struct drm_i915_private *dev_priv = dev->dev_private;
9773         u32 vga_reg = i915_vgacntrl_reg(dev);
9774
9775         if (I915_READ(vga_reg) != VGA_DISP_DISABLE) {
9776                 DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
9777                 i915_disable_vga(dev);
9778         }
9779 }
9780
9781 static void intel_modeset_readout_hw_state(struct drm_device *dev)
9782 {
9783         struct drm_i915_private *dev_priv = dev->dev_private;
9784         enum pipe pipe;
9785         struct intel_crtc *crtc;
9786         struct intel_encoder *encoder;
9787         struct intel_connector *connector;
9788         int i;
9789
9790         list_for_each_entry(crtc, &dev->mode_config.crtc_list,
9791                             base.head) {
9792                 memset(&crtc->config, 0, sizeof(crtc->config));
9793
9794                 crtc->active = dev_priv->display.get_pipe_config(crtc,
9795                                                                  &crtc->config);
9796
9797                 crtc->base.enabled = crtc->active;
9798
9799                 DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
9800                               crtc->base.base.id,
9801                               crtc->active ? "enabled" : "disabled");
9802         }
9803
9804         /* FIXME: Smash this into the new shared dpll infrastructure. */
9805         if (HAS_DDI(dev))
9806                 intel_ddi_setup_hw_pll_state(dev);
9807
9808         for (i = 0; i < dev_priv->num_shared_dpll; i++) {
9809                 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
9810
9811                 pll->on = pll->get_hw_state(dev_priv, pll, &pll->hw_state);
9812                 pll->active = 0;
9813                 list_for_each_entry(crtc, &dev->mode_config.crtc_list,
9814                                     base.head) {
9815                         if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
9816                                 pll->active++;
9817                 }
9818                 pll->refcount = pll->active;
9819
9820                 DRM_DEBUG_KMS("%s hw state readout: refcount %i\n",
9821                               pll->name, pll->refcount);
9822         }
9823
9824         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9825                             base.head) {
9826                 pipe = 0;
9827
9828                 if (encoder->get_hw_state(encoder, &pipe)) {
9829                         crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
9830                         encoder->base.crtc = &crtc->base;
9831                         if (encoder->get_config)
9832                                 encoder->get_config(encoder, &crtc->config);
9833                 } else {
9834                         encoder->base.crtc = NULL;
9835                 }
9836
9837                 encoder->connectors_active = false;
9838                 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe=%i\n",
9839                               encoder->base.base.id,
9840                               drm_get_encoder_name(&encoder->base),
9841                               encoder->base.crtc ? "enabled" : "disabled",
9842                               pipe);
9843         }
9844
9845         list_for_each_entry(connector, &dev->mode_config.connector_list,
9846                             base.head) {
9847                 if (connector->get_hw_state(connector)) {
9848                         connector->base.dpms = DRM_MODE_DPMS_ON;
9849                         connector->encoder->connectors_active = true;
9850                         connector->base.encoder = &connector->encoder->base;
9851                 } else {
9852                         connector->base.dpms = DRM_MODE_DPMS_OFF;
9853                         connector->base.encoder = NULL;
9854                 }
9855                 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
9856                               connector->base.base.id,
9857                               drm_get_connector_name(&connector->base),
9858                               connector->base.encoder ? "enabled" : "disabled");
9859         }
9860 }
9861
9862 /* Scan out the current hw modeset state, sanitizes it and maps it into the drm
9863  * and i915 state tracking structures. */
9864 void intel_modeset_setup_hw_state(struct drm_device *dev,
9865                                   bool force_restore)
9866 {
9867         struct drm_i915_private *dev_priv = dev->dev_private;
9868         enum pipe pipe;
9869         struct drm_plane *plane;
9870         struct intel_crtc *crtc;
9871         struct intel_encoder *encoder;
9872
9873         intel_modeset_readout_hw_state(dev);
9874
9875         /* HW state is read out, now we need to sanitize this mess. */
9876         list_for_each_entry(encoder, &dev->mode_config.encoder_list,
9877                             base.head) {
9878                 intel_sanitize_encoder(encoder);
9879         }
9880
9881         for_each_pipe(pipe) {
9882                 crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
9883                 intel_sanitize_crtc(crtc);
9884                 intel_dump_pipe_config(crtc, &crtc->config, "[setup_hw_state]");
9885         }
9886
9887         if (force_restore) {
9888                 /*
9889                  * We need to use raw interfaces for restoring state to avoid
9890                  * checking (bogus) intermediate states.
9891                  */
9892                 for_each_pipe(pipe) {
9893                         struct drm_crtc *crtc =
9894                                 dev_priv->pipe_to_crtc_mapping[pipe];
9895
9896                         __intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y,
9897                                          crtc->fb);
9898                 }
9899                 list_for_each_entry(plane, &dev->mode_config.plane_list, head)
9900                         intel_plane_restore(plane);
9901
9902                 i915_redisable_vga(dev);
9903         } else {
9904                 intel_modeset_update_staged_output_state(dev);
9905         }
9906
9907         intel_modeset_check_state(dev);
9908
9909         drm_mode_config_reset(dev);
9910 }
9911
9912 void intel_modeset_gem_init(struct drm_device *dev)
9913 {
9914         intel_modeset_init_hw(dev);
9915
9916         intel_setup_overlay(dev);
9917
9918         intel_modeset_setup_hw_state(dev, false);
9919 }
9920
9921 void intel_modeset_cleanup(struct drm_device *dev)
9922 {
9923         struct drm_i915_private *dev_priv = dev->dev_private;
9924         struct drm_crtc *crtc;
9925         struct intel_crtc *intel_crtc;
9926
9927         /*
9928          * Interrupts and polling as the first thing to avoid creating havoc.
9929          * Too much stuff here (turning of rps, connectors, ...) would
9930          * experience fancy races otherwise.
9931          */
9932         drm_irq_uninstall(dev);
9933         cancel_work_sync(&dev_priv->hotplug_work);
9934         /*
9935          * Due to the hpd irq storm handling the hotplug work can re-arm the
9936          * poll handlers. Hence disable polling after hpd handling is shut down.
9937          */
9938         drm_kms_helper_poll_fini(dev);
9939
9940         mutex_lock(&dev->struct_mutex);
9941
9942         intel_unregister_dsm_handler();
9943
9944         list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
9945                 /* Skip inactive CRTCs */
9946                 if (!crtc->fb)
9947                         continue;
9948
9949                 intel_crtc = to_intel_crtc(crtc);
9950                 intel_increase_pllclock(crtc);
9951         }
9952
9953         intel_disable_fbc(dev);
9954
9955         intel_disable_gt_powersave(dev);
9956
9957         ironlake_teardown_rc6(dev);
9958
9959         mutex_unlock(&dev->struct_mutex);
9960
9961         /* flush any delayed tasks or pending work */
9962         flush_scheduled_work();
9963
9964         /* destroy backlight, if any, before the connectors */
9965         intel_panel_destroy_backlight(dev);
9966
9967         drm_mode_config_cleanup(dev);
9968
9969         intel_cleanup_overlay(dev);
9970 }
9971
9972 /*
9973  * Return which encoder is currently attached for connector.
9974  */
9975 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
9976 {
9977         return &intel_attached_encoder(connector)->base;
9978 }
9979
9980 void intel_connector_attach_encoder(struct intel_connector *connector,
9981                                     struct intel_encoder *encoder)
9982 {
9983         connector->encoder = encoder;
9984         drm_mode_connector_attach_encoder(&connector->base,
9985                                           &encoder->base);
9986 }
9987
9988 /*
9989  * set vga decode state - true == enable VGA decode
9990  */
9991 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
9992 {
9993         struct drm_i915_private *dev_priv = dev->dev_private;
9994         u16 gmch_ctrl;
9995
9996         pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl);
9997         if (state)
9998                 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
9999         else
10000                 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
10001         pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl);
10002         return 0;
10003 }
10004
10005 #ifdef CONFIG_DEBUG_FS
10006 #include <linux/seq_file.h>
10007
10008 struct intel_display_error_state {
10009
10010         u32 power_well_driver;
10011
10012         struct intel_cursor_error_state {
10013                 u32 control;
10014                 u32 position;
10015                 u32 base;
10016                 u32 size;
10017         } cursor[I915_MAX_PIPES];
10018
10019         struct intel_pipe_error_state {
10020                 enum transcoder cpu_transcoder;
10021                 u32 conf;
10022                 u32 source;
10023
10024                 u32 htotal;
10025                 u32 hblank;
10026                 u32 hsync;
10027                 u32 vtotal;
10028                 u32 vblank;
10029                 u32 vsync;
10030         } pipe[I915_MAX_PIPES];
10031
10032         struct intel_plane_error_state {
10033                 u32 control;
10034                 u32 stride;
10035                 u32 size;
10036                 u32 pos;
10037                 u32 addr;
10038                 u32 surface;
10039                 u32 tile_offset;
10040         } plane[I915_MAX_PIPES];
10041 };
10042
10043 struct intel_display_error_state *
10044 intel_display_capture_error_state(struct drm_device *dev)
10045 {
10046         drm_i915_private_t *dev_priv = dev->dev_private;
10047         struct intel_display_error_state *error;
10048         enum transcoder cpu_transcoder;
10049         int i;
10050
10051         error = kmalloc(sizeof(*error), GFP_ATOMIC);
10052         if (error == NULL)
10053                 return NULL;
10054
10055         if (HAS_POWER_WELL(dev))
10056                 error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER);
10057
10058         for_each_pipe(i) {
10059                 cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, i);
10060                 error->pipe[i].cpu_transcoder = cpu_transcoder;
10061
10062                 if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) {
10063                         error->cursor[i].control = I915_READ(CURCNTR(i));
10064                         error->cursor[i].position = I915_READ(CURPOS(i));
10065                         error->cursor[i].base = I915_READ(CURBASE(i));
10066                 } else {
10067                         error->cursor[i].control = I915_READ(CURCNTR_IVB(i));
10068                         error->cursor[i].position = I915_READ(CURPOS_IVB(i));
10069                         error->cursor[i].base = I915_READ(CURBASE_IVB(i));
10070                 }
10071
10072                 error->plane[i].control = I915_READ(DSPCNTR(i));
10073                 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
10074                 if (INTEL_INFO(dev)->gen <= 3) {
10075                         error->plane[i].size = I915_READ(DSPSIZE(i));
10076                         error->plane[i].pos = I915_READ(DSPPOS(i));
10077                 }
10078                 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
10079                         error->plane[i].addr = I915_READ(DSPADDR(i));
10080                 if (INTEL_INFO(dev)->gen >= 4) {
10081                         error->plane[i].surface = I915_READ(DSPSURF(i));
10082                         error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
10083                 }
10084
10085                 error->pipe[i].conf = I915_READ(PIPECONF(cpu_transcoder));
10086                 error->pipe[i].source = I915_READ(PIPESRC(i));
10087                 error->pipe[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
10088                 error->pipe[i].hblank = I915_READ(HBLANK(cpu_transcoder));
10089                 error->pipe[i].hsync = I915_READ(HSYNC(cpu_transcoder));
10090                 error->pipe[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
10091                 error->pipe[i].vblank = I915_READ(VBLANK(cpu_transcoder));
10092                 error->pipe[i].vsync = I915_READ(VSYNC(cpu_transcoder));
10093         }
10094
10095         /* In the code above we read the registers without checking if the power
10096          * well was on, so here we have to clear the FPGA_DBG_RM_NOCLAIM bit to
10097          * prevent the next I915_WRITE from detecting it and printing an error
10098          * message. */
10099         if (HAS_POWER_WELL(dev))
10100                 I915_WRITE_NOTRACE(FPGA_DBG, FPGA_DBG_RM_NOCLAIM);
10101
10102         return error;
10103 }
10104
10105 #define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__)
10106
10107 void
10108 intel_display_print_error_state(struct drm_i915_error_state_buf *m,
10109                                 struct drm_device *dev,
10110                                 struct intel_display_error_state *error)
10111 {
10112         int i;
10113
10114         err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
10115         if (HAS_POWER_WELL(dev))
10116                 err_printf(m, "PWR_WELL_CTL2: %08x\n",
10117                            error->power_well_driver);
10118         for_each_pipe(i) {
10119                 err_printf(m, "Pipe [%d]:\n", i);
10120                 err_printf(m, "  CPU transcoder: %c\n",
10121                            transcoder_name(error->pipe[i].cpu_transcoder));
10122                 err_printf(m, "  CONF: %08x\n", error->pipe[i].conf);
10123                 err_printf(m, "  SRC: %08x\n", error->pipe[i].source);
10124                 err_printf(m, "  HTOTAL: %08x\n", error->pipe[i].htotal);
10125                 err_printf(m, "  HBLANK: %08x\n", error->pipe[i].hblank);
10126                 err_printf(m, "  HSYNC: %08x\n", error->pipe[i].hsync);
10127                 err_printf(m, "  VTOTAL: %08x\n", error->pipe[i].vtotal);
10128                 err_printf(m, "  VBLANK: %08x\n", error->pipe[i].vblank);
10129                 err_printf(m, "  VSYNC: %08x\n", error->pipe[i].vsync);
10130
10131                 err_printf(m, "Plane [%d]:\n", i);
10132                 err_printf(m, "  CNTR: %08x\n", error->plane[i].control);
10133                 err_printf(m, "  STRIDE: %08x\n", error->plane[i].stride);
10134                 if (INTEL_INFO(dev)->gen <= 3) {
10135                         err_printf(m, "  SIZE: %08x\n", error->plane[i].size);
10136                         err_printf(m, "  POS: %08x\n", error->plane[i].pos);
10137                 }
10138                 if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev))
10139                         err_printf(m, "  ADDR: %08x\n", error->plane[i].addr);
10140                 if (INTEL_INFO(dev)->gen >= 4) {
10141                         err_printf(m, "  SURF: %08x\n", error->plane[i].surface);
10142                         err_printf(m, "  TILEOFF: %08x\n", error->plane[i].tile_offset);
10143                 }
10144
10145                 err_printf(m, "Cursor [%d]:\n", i);
10146                 err_printf(m, "  CNTR: %08x\n", error->cursor[i].control);
10147                 err_printf(m, "  POS: %08x\n", error->cursor[i].position);
10148                 err_printf(m, "  BASE: %08x\n", error->cursor[i].base);
10149         }
10150 }
10151 #endif