]> rtime.felk.cvut.cz Git - l4.git/blob - l4/pkg/ankh/lib/lwip/lib/contrib/src/core/raw.c
update
[l4.git] / l4 / pkg / ankh / lib / lwip / lib / contrib / src / core / raw.c
1 /**
2  * @file
3  * Implementation of raw protocol PCBs for low-level handling of
4  * different types of protocols besides (or overriding) those
5  * already available in lwIP.
6  *
7  */
8
9 /*
10  * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
11  * All rights reserved.
12  *
13  * Redistribution and use in source and binary forms, with or without modification,
14  * are permitted provided that the following conditions are met:
15  *
16  * 1. Redistributions of source code must retain the above copyright notice,
17  *    this list of conditions and the following disclaimer.
18  * 2. Redistributions in binary form must reproduce the above copyright notice,
19  *    this list of conditions and the following disclaimer in the documentation
20  *    and/or other materials provided with the distribution.
21  * 3. The name of the author may not be used to endorse or promote products
22  *    derived from this software without specific prior written permission.
23  *
24  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
25  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
26  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
27  * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
28  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
29  * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
30  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
31  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
32  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
33  * OF SUCH DAMAGE.
34  *
35  * This file is part of the lwIP TCP/IP stack.
36  *
37  * Author: Adam Dunkels <adam@sics.se>
38  *
39  */
40
41 #include "lwip/opt.h"
42
43 #if LWIP_RAW /* don't build if not configured for use in lwipopts.h */
44
45 #include "lwip/def.h"
46 #include "lwip/memp.h"
47 #include "lwip/ip_addr.h"
48 #include "lwip/netif.h"
49 #include "lwip/raw.h"
50 #include "lwip/stats.h"
51 #include "arch/perf.h"
52
53 #include <string.h>
54
55 /** The list of RAW PCBs */
56 static struct raw_pcb *raw_pcbs;
57
58 /**
59  * Determine if in incoming IP packet is covered by a RAW PCB
60  * and if so, pass it to a user-provided receive callback function.
61  *
62  * Given an incoming IP datagram (as a chain of pbufs) this function
63  * finds a corresponding RAW PCB and calls the corresponding receive
64  * callback function.
65  *
66  * @param p pbuf to be demultiplexed to a RAW PCB.
67  * @param inp network interface on which the datagram was received.
68  * @return - 1 if the packet has been eaten by a RAW PCB receive
69  *           callback function. The caller MAY NOT not reference the
70  *           packet any longer, and MAY NOT call pbuf_free().
71  * @return - 0 if packet is not eaten (pbuf is still referenced by the
72  *           caller).
73  *
74  */
75 u8_t
76 raw_input(struct pbuf *p, struct netif *inp)
77 {
78   struct raw_pcb *pcb, *prev;
79   struct ip_hdr *iphdr;
80   s16_t proto;
81   u8_t eaten = 0;
82
83   LWIP_UNUSED_ARG(inp);
84
85   iphdr = (struct ip_hdr *)p->payload;
86   proto = IPH_PROTO(iphdr);
87
88   prev = NULL;
89   pcb = raw_pcbs;
90   /* loop through all raw pcbs until the packet is eaten by one */
91   /* this allows multiple pcbs to match against the packet by design */
92   while ((eaten == 0) && (pcb != NULL)) {
93     if ((pcb->protocol == proto) &&
94         (ip_addr_isany(&pcb->local_ip) ||
95          ip_addr_cmp(&(pcb->local_ip), &(iphdr->dest)))) {
96 #if IP_SOF_BROADCAST_RECV
97       /* broadcast filter? */
98       if ((pcb->so_options & SOF_BROADCAST) || !ip_addr_isbroadcast(&(iphdr->dest), inp))
99 #endif /* IP_SOF_BROADCAST_RECV */
100       {
101         /* receive callback function available? */
102         if (pcb->recv != NULL) {
103           /* the receive callback function did not eat the packet? */
104           if (pcb->recv(pcb->recv_arg, pcb, p, &(iphdr->src)) != 0) {
105             /* receive function ate the packet */
106             p = NULL;
107             eaten = 1;
108             if (prev != NULL) {
109             /* move the pcb to the front of raw_pcbs so that is
110                found faster next time */
111               prev->next = pcb->next;
112               pcb->next = raw_pcbs;
113               raw_pcbs = pcb;
114             }
115           }
116         }
117         /* no receive callback function was set for this raw PCB */
118       }
119       /* drop the packet */
120     }
121     prev = pcb;
122     pcb = pcb->next;
123   }
124   return eaten;
125 }
126
127 /**
128  * Bind a RAW PCB.
129  *
130  * @param pcb RAW PCB to be bound with a local address ipaddr.
131  * @param ipaddr local IP address to bind with. Use IP_ADDR_ANY to
132  * bind to all local interfaces.
133  *
134  * @return lwIP error code.
135  * - ERR_OK. Successful. No error occured.
136  * - ERR_USE. The specified IP address is already bound to by
137  * another RAW PCB.
138  *
139  * @see raw_disconnect()
140  */
141 err_t
142 raw_bind(struct raw_pcb *pcb, ip_addr_t *ipaddr)
143 {
144   ip_addr_set(&pcb->local_ip, ipaddr);
145   return ERR_OK;
146 }
147
148 /**
149  * Connect an RAW PCB. This function is required by upper layers
150  * of lwip. Using the raw api you could use raw_sendto() instead
151  *
152  * This will associate the RAW PCB with the remote address.
153  *
154  * @param pcb RAW PCB to be connected with remote address ipaddr and port.
155  * @param ipaddr remote IP address to connect with.
156  *
157  * @return lwIP error code
158  *
159  * @see raw_disconnect() and raw_sendto()
160  */
161 err_t
162 raw_connect(struct raw_pcb *pcb, ip_addr_t *ipaddr)
163 {
164   ip_addr_set(&pcb->remote_ip, ipaddr);
165   return ERR_OK;
166 }
167
168
169 /**
170  * Set the callback function for received packets that match the
171  * raw PCB's protocol and binding. 
172  * 
173  * The callback function MUST either
174  * - eat the packet by calling pbuf_free() and returning non-zero. The
175  *   packet will not be passed to other raw PCBs or other protocol layers.
176  * - not free the packet, and return zero. The packet will be matched
177  *   against further PCBs and/or forwarded to another protocol layers.
178  * 
179  * @return non-zero if the packet was free()d, zero if the packet remains
180  * available for others.
181  */
182 void
183 raw_recv(struct raw_pcb *pcb, raw_recv_fn recv, void *recv_arg)
184 {
185   /* remember recv() callback and user data */
186   pcb->recv = recv;
187   pcb->recv_arg = recv_arg;
188 }
189
190 /**
191  * Send the raw IP packet to the given address. Note that actually you cannot
192  * modify the IP headers (this is inconsistent with the receive callback where
193  * you actually get the IP headers), you can only specify the IP payload here.
194  * It requires some more changes in lwIP. (there will be a raw_send() function
195  * then.)
196  *
197  * @param pcb the raw pcb which to send
198  * @param p the IP payload to send
199  * @param ipaddr the destination address of the IP packet
200  *
201  */
202 err_t
203 raw_sendto(struct raw_pcb *pcb, struct pbuf *p, ip_addr_t *ipaddr)
204 {
205   err_t err;
206   struct netif *netif;
207   ip_addr_t *src_ip;
208   struct pbuf *q; /* q will be sent down the stack */
209   
210   LWIP_DEBUGF(RAW_DEBUG | LWIP_DBG_TRACE, ("raw_sendto\n"));
211   
212   /* not enough space to add an IP header to first pbuf in given p chain? */
213   if (pbuf_header(p, IP_HLEN)) {
214     /* allocate header in new pbuf */
215     q = pbuf_alloc(PBUF_IP, 0, PBUF_RAM);
216     /* new header pbuf could not be allocated? */
217     if (q == NULL) {
218       LWIP_DEBUGF(RAW_DEBUG | LWIP_DBG_TRACE | LWIP_DBG_LEVEL_SERIOUS, ("raw_sendto: could not allocate header\n"));
219       return ERR_MEM;
220     }
221     /* chain header q in front of given pbuf p */
222     pbuf_chain(q, p);
223     /* { first pbuf q points to header pbuf } */
224     LWIP_DEBUGF(RAW_DEBUG, ("raw_sendto: added header pbuf %p before given pbuf %p\n", (void *)q, (void *)p));
225   }  else {
226     /* first pbuf q equals given pbuf */
227     q = p;
228     if(pbuf_header(q, -IP_HLEN)) {
229       LWIP_ASSERT("Can't restore header we just removed!", 0);
230       return ERR_MEM;
231     }
232   }
233
234   if ((netif = ip_route(ipaddr)) == NULL) {
235     LWIP_DEBUGF(RAW_DEBUG | LWIP_DBG_LEVEL_WARNING, ("raw_sendto: No route to %"U16_F".%"U16_F".%"U16_F".%"U16_F"\n",
236       ip4_addr1_16(ipaddr), ip4_addr2_16(ipaddr), ip4_addr3_16(ipaddr), ip4_addr4_16(ipaddr)));
237     /* free any temporary header pbuf allocated by pbuf_header() */
238     if (q != p) {
239       pbuf_free(q);
240     }
241     return ERR_RTE;
242   }
243
244 #if IP_SOF_BROADCAST
245   /* broadcast filter? */
246   if (((pcb->so_options & SOF_BROADCAST) == 0) && ip_addr_isbroadcast(ipaddr, netif)) {
247     LWIP_DEBUGF(RAW_DEBUG | LWIP_DBG_LEVEL_WARNING, ("raw_sendto: SOF_BROADCAST not enabled on pcb %p\n", (void *)pcb));
248     /* free any temporary header pbuf allocated by pbuf_header() */
249     if (q != p) {
250       pbuf_free(q);
251     }
252     return ERR_VAL;
253   }
254 #endif /* IP_SOF_BROADCAST */
255
256   if (ip_addr_isany(&pcb->local_ip)) {
257     /* use outgoing network interface IP address as source address */
258     src_ip = &(netif->ip_addr);
259   } else {
260     /* use RAW PCB local IP address as source address */
261     src_ip = &(pcb->local_ip);
262   }
263
264 #if LWIP_NETIF_HWADDRHINT
265   netif->addr_hint = &(pcb->addr_hint);
266 #endif /* LWIP_NETIF_HWADDRHINT*/
267   err = ip_output_if (q, src_ip, ipaddr, pcb->ttl, pcb->tos, pcb->protocol, netif);
268 #if LWIP_NETIF_HWADDRHINT
269   netif->addr_hint = NULL;
270 #endif /* LWIP_NETIF_HWADDRHINT*/
271
272   /* did we chain a header earlier? */
273   if (q != p) {
274     /* free the header */
275     pbuf_free(q);
276   }
277   return err;
278 }
279
280 /**
281  * Send the raw IP packet to the address given by raw_connect()
282  *
283  * @param pcb the raw pcb which to send
284  * @param p the IP payload to send
285  *
286  */
287 err_t
288 raw_send(struct raw_pcb *pcb, struct pbuf *p)
289 {
290   return raw_sendto(pcb, p, &pcb->remote_ip);
291 }
292
293 /**
294  * Remove an RAW PCB.
295  *
296  * @param pcb RAW PCB to be removed. The PCB is removed from the list of
297  * RAW PCB's and the data structure is freed from memory.
298  *
299  * @see raw_new()
300  */
301 void
302 raw_remove(struct raw_pcb *pcb)
303 {
304   struct raw_pcb *pcb2;
305   /* pcb to be removed is first in list? */
306   if (raw_pcbs == pcb) {
307     /* make list start at 2nd pcb */
308     raw_pcbs = raw_pcbs->next;
309     /* pcb not 1st in list */
310   } else {
311     for(pcb2 = raw_pcbs; pcb2 != NULL; pcb2 = pcb2->next) {
312       /* find pcb in raw_pcbs list */
313       if (pcb2->next != NULL && pcb2->next == pcb) {
314         /* remove pcb from list */
315         pcb2->next = pcb->next;
316       }
317     }
318   }
319   memp_free(MEMP_RAW_PCB, pcb);
320 }
321
322 /**
323  * Create a RAW PCB.
324  *
325  * @return The RAW PCB which was created. NULL if the PCB data structure
326  * could not be allocated.
327  *
328  * @param proto the protocol number of the IPs payload (e.g. IP_PROTO_ICMP)
329  *
330  * @see raw_remove()
331  */
332 struct raw_pcb *
333 raw_new(u8_t proto)
334 {
335   struct raw_pcb *pcb;
336
337   LWIP_DEBUGF(RAW_DEBUG | LWIP_DBG_TRACE, ("raw_new\n"));
338
339   pcb = (struct raw_pcb *)memp_malloc(MEMP_RAW_PCB);
340   /* could allocate RAW PCB? */
341   if (pcb != NULL) {
342     /* initialize PCB to all zeroes */
343     memset(pcb, 0, sizeof(struct raw_pcb));
344     pcb->protocol = proto;
345     pcb->ttl = RAW_TTL;
346     pcb->next = raw_pcbs;
347     raw_pcbs = pcb;
348   }
349   return pcb;
350 }
351
352 #endif /* LWIP_RAW */