dcsimpledrv: Simple DC Motor driver - version with IRC and direct on/off output working.

[fpga/zynq/canbench-sw.git] / system / ip / dcsimpledrv_1.0 / example_designs / bfm_design / design.tcl

diff --git a/system/ip/dcsimpledrv_1.0/example_designs/bfm_design/design.tcl b/system/ip/dcsimpledrv_1.0/example_designs/bfm_design/design.tcl
new file mode 100644 (file)
index 0000000..ce53f14
--- /dev/null
+++ b/system/ip/dcsimpledrv_1.0/example_designs/bfm_design/design.tcl
@@ -0,0 +1,91 @@
+proc create_ipi_design { offsetfile design_name } {
+       create_bd_design $design_name
+       open_bd_design $design_name
+
+       # Create Clock and Reset Ports
+       set ACLK [ create_bd_port -dir I -type clk ACLK ]
+       set_property -dict [ list CONFIG.FREQ_HZ {100000000} CONFIG.PHASE {0.000} CONFIG.CLK_DOMAIN "${design_name}_ACLK" ] $ACLK
+       set ARESETN [ create_bd_port -dir I -type rst ARESETN ]
+       set_property -dict [ list CONFIG.POLARITY {ACTIVE_LOW}  ] $ARESETN
+       set_property CONFIG.ASSOCIATED_RESET ARESETN $ACLK
+
+       # Create instance: dcsimpledrv_0, and set properties
+       set dcsimpledrv_0 [ create_bd_cell -type ip -vlnv pikron.com:user:dcsimpledrv:1.0 dcsimpledrv_0]
+
+       # Create instance: master_0, and set properties
+       set master_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:cdn_axi_bfm master_0]
+       set_property -dict [ list CONFIG.C_PROTOCOL_SELECTION {2} ] $master_0
+
+       # Create interface connections
+       connect_bd_intf_net [get_bd_intf_pins master_0/M_AXI_LITE] [get_bd_intf_pins dcsimpledrv_0/S00_AXI]
+
+       # Create port connections
+       connect_bd_net -net aclk_net [get_bd_ports ACLK] [get_bd_pins master_0/M_AXI_LITE_ACLK] [get_bd_pins dcsimpledrv_0/S00_AXI_ACLK]
+       connect_bd_net -net aresetn_net [get_bd_ports ARESETN] [get_bd_pins master_0/M_AXI_LITE_ARESETN] [get_bd_pins dcsimpledrv_0/S00_AXI_ARESETN]
+
+       # Auto assign address
+       assign_bd_address
+
+       # Copy all address to interface_address.vh file
+       set bd_path [file dirname [get_property NAME [get_files ${design_name}.bd]]]
+       upvar 1 $offsetfile offset_file
+       set offset_file "${bd_path}/dcsimpledrv_v1_0_tb_include.vh"
+       set fp [open $offset_file "w"]
+       puts $fp "`ifndef dcsimpledrv_v1_0_tb_include_vh_"
+       puts $fp "`define dcsimpledrv_v1_0_tb_include_vh_\n"
+       puts $fp "//Configuration current bd names"
+       puts $fp "`define BD_INST_NAME ${design_name}_i"
+       puts $fp "`define BD_WRAPPER ${design_name}_wrapper\n"
+       puts $fp "//Configuration address parameters"
+
+       set offset [get_property OFFSET [get_bd_addr_segs -of_objects [get_bd_addr_spaces master_0/Data_lite]]]
+       set offset_hex [string replace $offset 0 1 "32'h"]
+       puts $fp "`define S00_AXI_SLAVE_ADDRESS ${offset_hex}"
+
+       puts $fp "`endif"
+       close $fp
+}
+
+set ip_path [file dirname [file normalize [get_property XML_FILE_NAME [ipx::get_cores pikron.com:user:dcsimpledrv:1.0]]]]
+set test_bench_file ${ip_path}/example_designs/bfm_design/dcsimpledrv_v1_0_tb.v
+set interface_address_vh_file ""
+
+# Set IP Repository and Update IP Catalogue
+set repo_paths [get_property ip_repo_paths [current_fileset]]
+if { [lsearch -exact -nocase $repo_paths $ip_path ] == -1 } {
+       set_property ip_repo_paths "$ip_path [get_property ip_repo_paths [current_fileset]]" [current_fileset]
+       update_ip_catalog
+}
+
+set design_name ""
+set all_bd {}
+set all_bd_files [get_files *.bd -quiet]
+foreach file $all_bd_files {
+set file_name [string range $file [expr {[string last "/" $file] + 1}] end]
+set bd_name [string range $file_name 0 [expr {[string last "." $file_name] -1}]]
+lappend all_bd $bd_name
+}
+
+for { set i 1 } { 1 } { incr i } {
+       set design_name "dcsimpledrv_v1_0_bfm_${i}"
+       if { [lsearch -exact -nocase $all_bd $design_name ] == -1 } {
+               break
+       }
+}
+
+create_ipi_design interface_address_vh_file ${design_name}
+validate_bd_design
+
+set wrapper_file [make_wrapper -files [get_files ${design_name}.bd] -top -force]
+import_files -force -norecurse $wrapper_file
+
+set_property SOURCE_SET sources_1 [get_filesets sim_1]
+import_files -fileset sim_1 -norecurse -force $test_bench_file
+remove_files -quiet -fileset sim_1 dcsimpledrv_v1_0_tb_include.vh
+import_files -fileset sim_1 -norecurse -force $interface_address_vh_file
+set_property top dcsimpledrv_v1_0_tb [get_filesets sim_1]
+set_property top_lib {} [get_filesets sim_1]
+set_property top_file {} [get_filesets sim_1]
+launch_xsim -simset sim_1 -mode behavioral
+restart
+run 1000 us