newlib/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17
  18
  19
  20 VPATH = @srcdir@
  21 pkgdatadir = $(datadir)/@PACKAGE@
  22 pkgincludedir = $(includedir)/@PACKAGE@
  23 pkglibdir = $(libdir)/@PACKAGE@
  24 pkglibexecdir = $(libexecdir)/@PACKAGE@
  25 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  26 install_sh_DATA = $(install_sh) -c -m 644
  27 install_sh_PROGRAM = $(install_sh) -c
  28 install_sh_SCRIPT = $(install_sh) -c
  29 INSTALL_HEADER = $(INSTALL_DATA)
  30 transform = $(program_transform_name)
  31 NORMAL_INSTALL = :
  32 PRE_INSTALL = :
  33 POST_INSTALL = :
  34 NORMAL_UNINSTALL = :
  35 PRE_UNINSTALL = :
  36 POST_UNINSTALL = :
  37 build_triplet = @build@
  38 host_triplet = @host@
  39 subdir = .
  40 DIST_COMMON = NEWS README ChangeLog $(srcdir)/Makefile.in \
  41         $(srcdir)/Makefile.am $(top_srcdir)/configure \
  42         $(am__configure_deps) acconfig.h $(srcdir)/newlib.hin \
  43         $(srcdir)/../mkinstalldirs
  44 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  45 am__aclocal_m4_deps = $(top_srcdir)/../libtool.m4 \
  46         $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
  47         $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
  48         $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in
  49 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  50         $(ACLOCAL_M4)
  51 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  52  configure.lineno config.status.lineno
  53 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
  54 CONFIG_HEADER = newlib.h
  55 CONFIG_CLEAN_FILES =
  56 CONFIG_CLEAN_VPATH_FILES =
  57 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  58 am__vpath_adj = case $$p in \
  59     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  60     *) f=$$p;; \
  61   esac;
  62 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  63 am__install_max = 40
  64 am__nobase_strip_setup = \
  65   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  66 am__nobase_strip = \
  67   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  68 am__nobase_list = $(am__nobase_strip_setup); \
  69   for p in $$list; do echo "$$p $$p"; done | \
  70   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  71   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  72     if (++n[$$2] == $(am__install_max)) \
  73       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  74     END { for (dir in files) print dir, files[dir] }'
  75 am__base_list = \
  76   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  77   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
  78 am__installdirs = "$(DESTDIR)$(toollibdir)" "$(DESTDIR)$(toollibdir)" \
  79         "$(DESTDIR)$(toollibdir)"
  80 LIBRARIES = $(toollib_LIBRARIES)
  81 ARFLAGS = cru
  82 libc_a_AR = $(AR) $(ARFLAGS)
  83 libc_a_LIBADD =
  84 libc_a_SOURCES = libc.c
  85 libc_a_OBJECTS = libc.$(OBJEXT)
  86 libm_a_AR = $(AR) $(ARFLAGS)
  87 libm_a_LIBADD =
  88 libm_a_SOURCES = libm.c
  89 libm_a_OBJECTS = libm.$(OBJEXT)
  90 LTLIBRARIES = $(toollib_LTLIBRARIES)
  91 libc_la_LIBADD =
  92 am_libc_la_OBJECTS =
  93 libc_la_OBJECTS = $(am_libc_la_OBJECTS)
  94 libc_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
  95         --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libc_la_LDFLAGS) \
  96         $(LDFLAGS) -o $@
  97 @USE_LIBTOOL_TRUE@am_libc_la_rpath = -rpath $(toollibdir)
  98 libm_la_LIBADD =
  99 am_libm_la_OBJECTS =
 100 libm_la_OBJECTS = $(am_libm_la_OBJECTS)
 101 libm_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 102         --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libm_la_LDFLAGS) \
 103         $(LDFLAGS) -o $@
 104 @USE_LIBTOOL_TRUE@am_libm_la_rpath = -rpath $(toollibdir)
 105 DEFAULT_INCLUDES = -I.@am__isrc@
 106 depcomp =
 107 am__depfiles_maybe =
 108 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 109         $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 110 LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 111         --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 112         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 113 CCLD = $(CC)
 114 LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 115         --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 116         $(LDFLAGS) -o $@
 117 SOURCES = libc.c libm.c $(libc_la_SOURCES) $(libm_la_SOURCES)
 118 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 119         html-recursive info-recursive install-data-recursive \
 120         install-dvi-recursive install-exec-recursive \
 121         install-html-recursive install-info-recursive \
 122         install-pdf-recursive install-ps-recursive install-recursive \
 123         installcheck-recursive installdirs-recursive pdf-recursive \
 124         ps-recursive uninstall-recursive
 125 DATA = $(noinst_DATA) $(toollib_DATA)
 126 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 127   distclean-recursive maintainer-clean-recursive
 128 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 129         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
 130 ETAGS = etags
 131 CTAGS = ctags
 132 DEJATOOL = $(PACKAGE)
 133 RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
 134 EXPECT = `if test -f $(top_builddir)/../expect/expect; then \
 135             echo $(top_builddir)/../expect/expect; \
 136           else \
 137             echo expect; \
 138           fi`
 139 RUNTEST = `if test -f $(top_srcdir)/../dejagnu/runtest; then \
 140              echo $(top_srcdir)/../dejagnu/runtest; \
 141            else \
 142              echo runtest; \
 143            fi`
 144 DIST_SUBDIRS = libc libm doc . @EXTRA_DIRS@
 145 ACLOCAL = @ACLOCAL@
 146 AMTAR = @AMTAR@
 147 AR = @AR@
 148 AS = @AS@
 149 AUTOCONF = @AUTOCONF@
 150 AUTOHEADER = @AUTOHEADER@
 151 AUTOMAKE = @AUTOMAKE@
 152 AWK = @AWK@
 153 CC = @CC@
 154 CCAS = @CCAS@
 155 CCASFLAGS = @CCASFLAGS@
 156 CCDEPMODE = @CCDEPMODE@
 157 CC_FOR_BUILD = @CC_FOR_BUILD@
 158 CC_FOR_NEWLIB = @CC_FOR_NEWLIB@
 159 CFLAGS = @CFLAGS@
 160 CPP = @CPP@
 161 CPPFLAGS = @CPPFLAGS@
 162 CRT0 = @CRT0@
 163 CRT0_DIR = @CRT0_DIR@
 164 CRT1 = @CRT1@
 165 CRT1_DIR = @CRT1_DIR@
 166 CYGPATH_W = @CYGPATH_W@
 167 DEFS = @DEFS@
 168 DEPDIR = @DEPDIR@
 169 DLLTOOL = @DLLTOOL@
 170 DSYMUTIL = @DSYMUTIL@
 171 DUMPBIN = @DUMPBIN@
 172 ECHO_C = @ECHO_C@
 173 ECHO_N = @ECHO_N@
 174 ECHO_T = @ECHO_T@
 175 EGREP = @EGREP@
 176 EXEEXT = @EXEEXT@
 177 EXTRA_DIRS = @EXTRA_DIRS@
 178 FGREP = @FGREP@
 179 GREP = @GREP@
 180 INSTALL = @INSTALL@
 181 INSTALL_DATA = @INSTALL_DATA@
 182 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 183 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 184 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 185 LD = @LD@
 186 LDFLAGS = @LDFLAGS@
 187 LIBM_MACHINE_OBJECTLIST = @LIBM_MACHINE_OBJECTLIST@
 188 LIBOBJS = @LIBOBJS@
 189 LIBS = @LIBS@
 190 LIBTOOL = @LIBTOOL@
 191 LIPO = @LIPO@
 192 LN_S = @LN_S@
 193 LTLIBOBJS = @LTLIBOBJS@
 194 MACHINE_OBJECTLIST = @MACHINE_OBJECTLIST@
 195 MAINT = @MAINT@
 196 MAKEINFO = @MAKEINFO@
 197 MKDIR_P = @MKDIR_P@
 198 NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
 199 NM = @NM@
 200 NMEDIT = @NMEDIT@
 201 NO_INCLUDE_LIST = @NO_INCLUDE_LIST@
 202 OBJDUMP = @OBJDUMP@
 203 OBJEXT = @OBJEXT@
 204 OTOOL = @OTOOL@
 205 OTOOL64 = @OTOOL64@
 206 PACKAGE = @PACKAGE@
 207 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 208 PACKAGE_NAME = @PACKAGE_NAME@
 209 PACKAGE_STRING = @PACKAGE_STRING@
 210 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 211 PACKAGE_URL = @PACKAGE_URL@
 212 PACKAGE_VERSION = @PACKAGE_VERSION@
 213 PATH_SEPARATOR = @PATH_SEPARATOR@
 214 POSIX_OBJECTLIST = @POSIX_OBJECTLIST@
 215 RANLIB = @RANLIB@
 216 READELF = @READELF@
 217 SED = @SED@
 218 SET_MAKE = @SET_MAKE@
 219 SHELL = @SHELL@
 220 SIGNAL_OBJECTLIST = @SIGNAL_OBJECTLIST@
 221 STDIO64_OBJECTLIST = @STDIO64_OBJECTLIST@
 222 STRIP = @STRIP@
 223 SYSCALL_OBJECTLIST = @SYSCALL_OBJECTLIST@
 224 SYS_MACH_OBJECTLIST = @SYS_MACH_OBJECTLIST@
 225 SYS_OBJECTLIST = @SYS_OBJECTLIST@
 226 UNIX_OBJECTLIST = @UNIX_OBJECTLIST@
 227 VERSION = @VERSION@
 228 abs_builddir = @abs_builddir@
 229 abs_srcdir = @abs_srcdir@
 230 abs_top_builddir = @abs_top_builddir@
 231 abs_top_srcdir = @abs_top_srcdir@
 232 ac_ct_CC = @ac_ct_CC@
 233 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 234 aext = @aext@
 235 am__include = @am__include@
 236 am__leading_dot = @am__leading_dot@
 237 am__quote = @am__quote@
 238 am__tar = @am__tar@
 239 am__untar = @am__untar@
 240 bindir = @bindir@
 241 build = @build@
 242 build_alias = @build_alias@
 243 build_cpu = @build_cpu@
 244 build_os = @build_os@
 245 build_vendor = @build_vendor@
 246 builddir = @builddir@
 247 datadir = @datadir@
 248 datarootdir = @datarootdir@
 249 docdir = @docdir@
 250 dvidir = @dvidir@
 251 exec_prefix = @exec_prefix@
 252 host = @host@
 253 host_alias = @host_alias@
 254 host_cpu = @host_cpu@
 255 host_os = @host_os@
 256 host_vendor = @host_vendor@
 257 htmldir = @htmldir@
 258 includedir = @includedir@
 259 infodir = @infodir@
 260 install_sh = @install_sh@
 261 libc_cv_initfinit_array = @libc_cv_initfinit_array@
 262 libdir = @libdir@
 263 libexecdir = @libexecdir@
 264 libm_machine_dir = @libm_machine_dir@
 265 localedir = @localedir@
 266 localstatedir = @localstatedir@
 267 lpfx = @lpfx@
 268 machine_dir = @machine_dir@
 269 mandir = @mandir@
 270 mkdir_p = @mkdir_p@
 271 newlib_basedir = @newlib_basedir@
 272 oext = @oext@
 273 oldincludedir = @oldincludedir@
 274 pdfdir = @pdfdir@
 275 prefix = @prefix@
 276 program_transform_name = @program_transform_name@
 277 psdir = @psdir@
 278 sbindir = @sbindir@
 279 sharedstatedir = @sharedstatedir@
 280 srcdir = @srcdir@
 281 subdirs = @subdirs@
 282 sys_dir = @sys_dir@
 283 sysconfdir = @sysconfdir@
 284 target_alias = @target_alias@
 285 top_build_prefix = @top_build_prefix@
 286 top_builddir = @top_builddir@
 287 top_srcdir = @top_srcdir@
 288 AUTOMAKE_OPTIONS = cygnus dejagnu
 289 ACLOCAL_AMFLAGS = -I . -I ..
 290
 291 # Multilib support variables.
 292 MULTISRCTOP =
 293 MULTIBUILDTOP =
 294 MULTIDIRS =
 295 MULTISUBDIR =
 296 MULTIDO = true
 297 MULTICLEAN = true
 298 LIBTOOL_VERSION_INFO = 0:0:0
 299 @NEWLIB_HW_FP_FALSE@MATHDIR = math
 300
 301 # The newlib hardware floating-point routines have been disabled due to
 302 # inaccuracy.  If you wish to work on them, you will need to edit the
 303 # configure.in file to re-enable the configuration option.  By default,
 304 # the NEWLIB_HW_FP variable will always be false.
 305 @NEWLIB_HW_FP_TRUE@MATHDIR = mathfp
 306
 307 # Work around what appears to be a GNU make bug handling MAKEFLAGS
 308 # values defined in terms of make variables, as is the case for CC and
 309 # friends when we are called from the top level Makefile.
 310 AM_MAKEFLAGS = \
 311         "AR_FLAGS=$(AR_FLAGS)" \
 312         "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
 313         "CFLAGS=$(CFLAGS)" \
 314         "CCASFLAGS=$(CCASFLAGS)" \
 315         "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
 316         "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
 317         "INSTALL=$(INSTALL)" \
 318         "LDFLAGS=$(LDFLAGS)" \
 319         "LIBCFLAGS=$(LIBCFLAGS)" \
 320         "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
 321         "MAKE=$(MAKE)" \
 322         "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
 323         "PICFLAG=$(PICFLAG)" \
 324         "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
 325         "SHELL=$(SHELL)" \
 326         "EXPECT=$(EXPECT)" \
 327         "RUNTEST=$(RUNTEST)" \
 328         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 329         "exec_prefix=$(exec_prefix)" \
 330         "infodir=$(infodir)" \
 331         "libdir=$(libdir)" \
 332         "prefix=$(prefix)" \
 333         "tooldir=$(tooldir)" \
 334         "top_toollibdir=$(toollibdir)" \
 335         "AR=$(AR)" \
 336         "AS=$(AS)" \
 337         "CC=$(CC_FOR_NEWLIB)" \
 338         "LD=$(LD)" \
 339         "LIBCFLAGS=$(LIBCFLAGS)" \
 340         "NM=$(NM)" \
 341         "PICFLAG=$(PICFLAG)" \
 342         "RANLIB=$(RANLIB)" \
 343         "DESTDIR=$(DESTDIR)"
 344
 345 FLAGS_TO_PASS = $(AM_MAKEFLAGS)
 346 @HAVE_DOC_FALSE@DOCDIR =
 347 @HAVE_DOC_TRUE@DOCDIR = doc
 348 SUBDIRS = libc libm \
 349         $(DOCDIR) . $(EXTRA_DIRS)
 350
 351 tooldir = $(exec_prefix)/$(host_alias)
 352 toollibdir = $(tooldir)/lib$(MULTISUBDIR)
 353 AR_FLAGS = rc
 354 @USE_LIBTOOL_TRUE@toollib_LTLIBRARIES = libm.la \
 355 @USE_LIBTOOL_TRUE@      libc.la
 356
 357 @USE_LIBTOOL_FALSE@toollib_LIBRARIES = libm.a \
 358 @USE_LIBTOOL_FALSE@     libc.a
 359
 360 noinst_DATA = stmp-targ-include
 361 toollib_DATA = $(CRT0) $(CRT1)
 362
 363 # The functions ldexp, frexp and modf are traditionally supplied in
 364 # both libc.a and libm.a.  We build them in libm.a and copy them over,
 365 # along with some required supporting routines.
 366 MATHOBJS_IN_LIBC = \
 367         $(lpfx)s_fpclassify.$(oext) $(lpfx)sf_fpclassify.$(oext) \
 368         $(lpfx)s_isinf.$(oext) $(lpfx)sf_isinf.$(oext) \
 369         $(lpfx)s_isnan.$(oext) $(lpfx)sf_isnan.$(oext) \
 370         $(lpfx)s_isinfd.$(oext) $(lpfx)sf_isinff.$(oext) \
 371         $(lpfx)s_isnand.$(oext) $(lpfx)sf_isnanf.$(oext) \
 372         $(lpfx)s_nan.$(oext) $(lpfx)sf_nan.$(oext) \
 373         $(lpfx)s_ldexp.$(oext) $(lpfx)sf_ldexp.$(oext) \
 374         $(lpfx)s_frexp.$(oext) $(lpfx)sf_frexp.$(oext) \
 375         $(lpfx)s_modf.$(oext) \
 376         $(lpfx)sf_modf.$(oext) $(lpfx)s_scalbn.$(oext) \
 377         $(lpfx)sf_scalbn.$(oext) \
 378         $(lpfx)s_finite.$(oext) $(lpfx)sf_finite.$(oext) \
 379         $(lpfx)s_copysign.$(oext) $(lpfx)sf_copysign.$(oext) \
 380         $(lpfx)s_infconst.$(oext)
 381
 382 LIBC_OBJECTLISTS = \
 383         $(POSIX_OBJECTLIST) \
 384         $(SIGNAL_OBJECTLIST) \
 385         $(SYSCALL_OBJECTLIST) \
 386         $(UNIX_OBJECTLIST) \
 387         $(STDIO64_OBJECTLIST) \
 388         libc/argz/objectlist.awk.in \
 389         libc/stdlib/objectlist.awk.in \
 390         libc/time/objectlist.awk.in \
 391         libc/ctype/objectlist.awk.in \
 392         libc/search/objectlist.awk.in \
 393         libc/string/objectlist.awk.in \
 394         libc/locale/objectlist.awk.in \
 395         libc/misc/objectlist.awk.in \
 396         libc/reent/objectlist.awk.in \
 397         libc/errno/objectlist.awk.in \
 398         libc/stdio/objectlist.awk.in \
 399         $(MACHINE_OBJECTLIST) \
 400         $(SYS_OBJECTLIST) \
 401         $(SYS_MACH_OBJECTLIST)
 402
 403 LIBM_OBJECTLISTS = \
 404         libm/$(MATHDIR)/objectlist.awk.in \
 405         libm/common/objectlist.awk.in \
 406         $(LIBM_MACHINE_OBJECTLIST)
 407
 408 libm_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/libc/sys/linux/shared.ld -lgcc -objectlist libm-libtool-objectlist
 409 libc_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/libc/sys/linux/shared.ld -lgcc -objectlist libc-libtool-objectlist
 410 @USE_LIBTOOL_TRUE@libm_la_SOURCES =
 411 @USE_LIBTOOL_TRUE@libm_la_DEPENDENCIES = libm-libtool-objectlist
 412 @USE_LIBTOOL_TRUE@libc_la_SOURCES =
 413 @USE_LIBTOOL_TRUE@libc_la_DEPENDENCIES = libc-libtool-objectlist
 414 CLEANFILES = stmp-targ-include
 415 CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
 416 MAKEOVERRIDES =
 417
 418 # dejagnu support
 419 RUNTESTFLAGS =
 420 all: newlib.h
 421         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 422
 423 .SUFFIXES:
 424 .SUFFIXES: .c .lo .o .obj
 425 am--refresh:
 426         @:
 427 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 428         @for dep in $?; do \
 429           case '$(am__configure_deps)' in \
 430             *$$dep*) \
 431               echo ' cd $(srcdir) && $(AUTOMAKE) --cygnus'; \
 432               $(am__cd) $(srcdir) && $(AUTOMAKE) --cygnus \
 433                 && exit 0; \
 434               exit 1;; \
 435           esac; \
 436         done; \
 437         echo ' cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile'; \
 438         $(am__cd) $(top_srcdir) && \
 439           $(AUTOMAKE) --cygnus Makefile
 440 .PRECIOUS: Makefile
 441 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 442         @case '$?' in \
 443           *config.status*) \
 444             echo ' $(SHELL) ./config.status'; \
 445             $(SHELL) ./config.status;; \
 446           *) \
 447             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 448             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 449         esac;
 450
 451 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 452         $(SHELL) ./config.status --recheck
 453
 454 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 455         $(am__cd) $(srcdir) && $(AUTOCONF)
 456 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 457         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 458 $(am__aclocal_m4_deps):
 459
 460 newlib.h: stamp-h1
 461         @if test ! -f $@; then \
 462           rm -f stamp-h1; \
 463           $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
 464         else :; fi
 465
 466 stamp-h1: $(srcdir)/newlib.hin $(top_builddir)/config.status
 467         @rm -f stamp-h1
 468         cd $(top_builddir) && $(SHELL) ./config.status newlib.h
 469
 470 distclean-hdr:
 471         -rm -f newlib.h stamp-h1
 472 install-toollibLIBRARIES: $(toollib_LIBRARIES)
 473         @$(NORMAL_INSTALL)
 474         test -z "$(toollibdir)" || $(MKDIR_P) "$(DESTDIR)$(toollibdir)"
 475         @list='$(toollib_LIBRARIES)'; test -n "$(toollibdir)" || list=; \
 476         list2=; for p in $$list; do \
 477           if test -f $$p; then \
 478             list2="$$list2 $$p"; \
 479           else :; fi; \
 480         done; \
 481         test -z "$$list2" || { \
 482           echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(toollibdir)'"; \
 483           $(INSTALL_DATA) $$list2 "$(DESTDIR)$(toollibdir)" || exit $$?; }
 484         @$(POST_INSTALL)
 485         @list='$(toollib_LIBRARIES)'; test -n "$(toollibdir)" || list=; \
 486         for p in $$list; do \
 487           if test -f $$p; then \
 488             $(am__strip_dir) \
 489             echo " ( cd '$(DESTDIR)$(toollibdir)' && $(RANLIB) $$f )"; \
 490             ( cd "$(DESTDIR)$(toollibdir)" && $(RANLIB) $$f ) || exit $$?; \
 491           else :; fi; \
 492         done
 493
 494 uninstall-toollibLIBRARIES:
 495         @$(NORMAL_UNINSTALL)
 496         @list='$(toollib_LIBRARIES)'; test -n "$(toollibdir)" || list=; \
 497         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 498         test -n "$$files" || exit 0; \
 499         echo " ( cd '$(DESTDIR)$(toollibdir)' && rm -f "$$files" )"; \
 500         cd "$(DESTDIR)$(toollibdir)" && rm -f $$files
 501
 502 clean-toollibLIBRARIES:
 503         -test -z "$(toollib_LIBRARIES)" || rm -f $(toollib_LIBRARIES)
 504 @USE_LIBTOOL_TRUE@libc.a: $(libc_a_OBJECTS) $(libc_a_DEPENDENCIES)
 505 @USE_LIBTOOL_TRUE@      -rm -f libc.a
 506 @USE_LIBTOOL_TRUE@      $(libc_a_AR) libc.a $(libc_a_OBJECTS) $(libc_a_LIBADD)
 507 @USE_LIBTOOL_TRUE@      $(RANLIB) libc.a
 508 @USE_LIBTOOL_TRUE@libm.a: $(libm_a_OBJECTS) $(libm_a_DEPENDENCIES)
 509 @USE_LIBTOOL_TRUE@      -rm -f libm.a
 510 @USE_LIBTOOL_TRUE@      $(libm_a_AR) libm.a $(libm_a_OBJECTS) $(libm_a_LIBADD)
 511 @USE_LIBTOOL_TRUE@      $(RANLIB) libm.a
 512 install-toollibLTLIBRARIES: $(toollib_LTLIBRARIES)
 513         @$(NORMAL_INSTALL)
 514         test -z "$(toollibdir)" || $(MKDIR_P) "$(DESTDIR)$(toollibdir)"
 515         @list='$(toollib_LTLIBRARIES)'; test -n "$(toollibdir)" || list=; \
 516         list2=; for p in $$list; do \
 517           if test -f $$p; then \
 518             list2="$$list2 $$p"; \
 519           else :; fi; \
 520         done; \
 521         test -z "$$list2" || { \
 522           echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toollibdir)'"; \
 523           $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toollibdir)"; \
 524         }
 525
 526 uninstall-toollibLTLIBRARIES:
 527         @$(NORMAL_UNINSTALL)
 528         @list='$(toollib_LTLIBRARIES)'; test -n "$(toollibdir)" || list=; \
 529         for p in $$list; do \
 530           $(am__strip_dir) \
 531           echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toollibdir)/$$f'"; \
 532           $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toollibdir)/$$f"; \
 533         done
 534
 535 clean-toollibLTLIBRARIES:
 536         -test -z "$(toollib_LTLIBRARIES)" || rm -f $(toollib_LTLIBRARIES)
 537         @list='$(toollib_LTLIBRARIES)'; for p in $$list; do \
 538           dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
 539           test "$$dir" != "$$p" || dir=.; \
 540           echo "rm -f \"$${dir}/so_locations\""; \
 541           rm -f "$${dir}/so_locations"; \
 542         done
 543 libc.la: $(libc_la_OBJECTS) $(libc_la_DEPENDENCIES)
 544         $(libc_la_LINK) $(am_libc_la_rpath) $(libc_la_OBJECTS) $(libc_la_LIBADD) $(LIBS)
 545 libm.la: $(libm_la_OBJECTS) $(libm_la_DEPENDENCIES)
 546         $(libm_la_LINK) $(am_libm_la_rpath) $(libm_la_OBJECTS) $(libm_la_LIBADD) $(LIBS)
 547
 548 mostlyclean-compile:
 549         -rm -f *.$(OBJEXT)
 550
 551 distclean-compile:
 552         -rm -f *.tab.c
 553
 554 .c.o:
 555         $(COMPILE) -c $<
 556
 557 .c.obj:
 558         $(COMPILE) -c `$(CYGPATH_W) '$<'`
 559
 560 .c.lo:
 561         $(LTCOMPILE) -c -o $@ $<
 562
 563 mostlyclean-libtool:
 564         -rm -f *.lo
 565
 566 clean-libtool:
 567         -rm -rf .libs _libs
 568
 569 distclean-libtool:
 570         -rm -f libtool config.lt
 571 install-toollibDATA: $(toollib_DATA)
 572         @$(NORMAL_INSTALL)
 573         test -z "$(toollibdir)" || $(MKDIR_P) "$(DESTDIR)$(toollibdir)"
 574         @list='$(toollib_DATA)'; test -n "$(toollibdir)" || list=; \
 575         for p in $$list; do \
 576           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 577           echo "$$d$$p"; \
 578         done | $(am__base_list) | \
 579         while read files; do \
 580           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(toollibdir)'"; \
 581           $(INSTALL_DATA) $$files "$(DESTDIR)$(toollibdir)" || exit $$?; \
 582         done
 583
 584 uninstall-toollibDATA:
 585         @$(NORMAL_UNINSTALL)
 586         @list='$(toollib_DATA)'; test -n "$(toollibdir)" || list=; \
 587         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 588         test -n "$$files" || exit 0; \
 589         echo " ( cd '$(DESTDIR)$(toollibdir)' && rm -f" $$files ")"; \
 590         cd "$(DESTDIR)$(toollibdir)" && rm -f $$files
 591
 592 # This directory's subdirectories are mostly independent; you can cd
 593 # into them and run `make' without going through this Makefile.
 594 # To change the values of `make' variables: instead of editing Makefiles,
 595 # (1) if the variable is set in `config.status', edit `config.status'
 596 #     (which will cause the Makefiles to be regenerated when you run `make');
 597 # (2) otherwise, pass the desired values on the `make' command line.
 598 $(RECURSIVE_TARGETS):
 599         @fail= failcom='exit 1'; \
 600         for f in x $$MAKEFLAGS; do \
 601           case $$f in \
 602             *=* | --[!k]*);; \
 603             *k*) failcom='fail=yes';; \
 604           esac; \
 605         done; \
 606         dot_seen=no; \
 607         target=`echo $@ | sed s/-recursive//`; \
 608         list='$(SUBDIRS)'; for subdir in $$list; do \
 609           echo "Making $$target in $$subdir"; \
 610           if test "$$subdir" = "."; then \
 611             dot_seen=yes; \
 612             local_target="$$target-am"; \
 613           else \
 614             local_target="$$target"; \
 615           fi; \
 616           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 617           || eval $$failcom; \
 618         done; \
 619         if test "$$dot_seen" = "no"; then \
 620           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 621         fi; test -z "$$fail"
 622
 623 $(RECURSIVE_CLEAN_TARGETS):
 624         @fail= failcom='exit 1'; \
 625         for f in x $$MAKEFLAGS; do \
 626           case $$f in \
 627             *=* | --[!k]*);; \
 628             *k*) failcom='fail=yes';; \
 629           esac; \
 630         done; \
 631         dot_seen=no; \
 632         case "$@" in \
 633           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 634           *) list='$(SUBDIRS)' ;; \
 635         esac; \
 636         rev=''; for subdir in $$list; do \
 637           if test "$$subdir" = "."; then :; else \
 638             rev="$$subdir $$rev"; \
 639           fi; \
 640         done; \
 641         rev="$$rev ."; \
 642         target=`echo $@ | sed s/-recursive//`; \
 643         for subdir in $$rev; do \
 644           echo "Making $$target in $$subdir"; \
 645           if test "$$subdir" = "."; then \
 646             local_target="$$target-am"; \
 647           else \
 648             local_target="$$target"; \
 649           fi; \
 650           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 651           || eval $$failcom; \
 652         done && test -z "$$fail"
 653 tags-recursive:
 654         list='$(SUBDIRS)'; for subdir in $$list; do \
 655           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 656         done
 657 ctags-recursive:
 658         list='$(SUBDIRS)'; for subdir in $$list; do \
 659           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 660         done
 661
 662 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 663         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 664         unique=`for i in $$list; do \
 665             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 666           done | \
 667           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 668               END { if (nonempty) { for (i in files) print i; }; }'`; \
 669         mkid -fID $$unique
 670 tags: TAGS
 671
 672 TAGS: tags-recursive $(HEADERS) $(SOURCES) newlib.hin $(TAGS_DEPENDENCIES) \
 673                 $(TAGS_FILES) $(LISP)
 674         set x; \
 675         here=`pwd`; \
 676         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 677           include_option=--etags-include; \
 678           empty_fix=.; \
 679         else \
 680           include_option=--include; \
 681           empty_fix=; \
 682         fi; \
 683         list='$(SUBDIRS)'; for subdir in $$list; do \
 684           if test "$$subdir" = .; then :; else \
 685             test ! -f $$subdir/TAGS || \
 686               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 687           fi; \
 688         done; \
 689         list='$(SOURCES) $(HEADERS) newlib.hin $(LISP) $(TAGS_FILES)'; \
 690         unique=`for i in $$list; do \
 691             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 692           done | \
 693           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 694               END { if (nonempty) { for (i in files) print i; }; }'`; \
 695         shift; \
 696         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 697           test -n "$$unique" || unique=$$empty_fix; \
 698           if test $$# -gt 0; then \
 699             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 700               "$$@" $$unique; \
 701           else \
 702             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 703               $$unique; \
 704           fi; \
 705         fi
 706 ctags: CTAGS
 707 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) newlib.hin $(TAGS_DEPENDENCIES) \
 708                 $(TAGS_FILES) $(LISP)
 709         list='$(SOURCES) $(HEADERS) newlib.hin $(LISP) $(TAGS_FILES)'; \
 710         unique=`for i in $$list; do \
 711             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 712           done | \
 713           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 714               END { if (nonempty) { for (i in files) print i; }; }'`; \
 715         test -z "$(CTAGS_ARGS)$$unique" \
 716           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 717              $$unique
 718
 719 GTAGS:
 720         here=`$(am__cd) $(top_builddir) && pwd` \
 721           && $(am__cd) $(top_srcdir) \
 722           && gtags -i $(GTAGS_ARGS) "$$here"
 723
 724 distclean-tags:
 725         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 726
 727 distclean-DEJAGNU:
 728         -rm -f site.exp site.bak
 729         -l='$(DEJATOOL)'; for tool in $$l; do \
 730           rm -f $$tool.sum $$tool.log; \
 731         done
 732 check-am:
 733         $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
 734 check: check-recursive
 735 all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA) newlib.h
 736 installdirs: installdirs-recursive
 737 installdirs-am:
 738         for dir in "$(DESTDIR)$(toollibdir)" "$(DESTDIR)$(toollibdir)" "$(DESTDIR)$(toollibdir)"; do \
 739           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 740         done
 741 install: install-recursive
 742 install-exec: install-exec-recursive
 743 install-data: install-data-recursive
 744 uninstall: uninstall-recursive
 745
 746 install-am: all-am
 747         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 748
 749 installcheck: installcheck-recursive
 750 install-strip:
 751         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 752           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 753           `test -z '$(STRIP)' || \
 754             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 755 mostlyclean-generic:
 756
 757 clean-generic:
 758         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 759
 760 distclean-generic:
 761         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 762         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 763
 764 maintainer-clean-generic:
 765         @echo "This command is intended for maintainers to use"
 766         @echo "it deletes files that may require special tools to rebuild."
 767 clean: clean-recursive
 768
 769 clean-am: clean-generic clean-libtool clean-local \
 770         clean-toollibLIBRARIES clean-toollibLTLIBRARIES mostlyclean-am
 771
 772 distclean: distclean-recursive
 773         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 774         -rm -f Makefile
 775 distclean-am: clean-am distclean-DEJAGNU distclean-compile \
 776         distclean-generic distclean-hdr distclean-libtool \
 777         distclean-tags
 778
 779 dvi: dvi-recursive
 780
 781 dvi-am:
 782
 783 html: html-recursive
 784
 785 html-am:
 786
 787 info: info-recursive
 788
 789 info-am:
 790
 791 install-data-am: install-data-local install-toollibDATA \
 792         install-toollibLIBRARIES install-toollibLTLIBRARIES
 793
 794 install-dvi: install-dvi-recursive
 795
 796 install-dvi-am:
 797
 798 install-exec-am:
 799
 800 install-html: install-html-recursive
 801
 802 install-html-am:
 803
 804 install-info: install-info-recursive
 805
 806 install-info-am:
 807
 808 install-man:
 809
 810 install-pdf: install-pdf-recursive
 811
 812 install-pdf-am:
 813
 814 install-ps: install-ps-recursive
 815
 816 install-ps-am:
 817
 818 installcheck-am:
 819
 820 maintainer-clean: maintainer-clean-recursive
 821         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 822         -rm -rf $(top_srcdir)/autom4te.cache
 823         -rm -f Makefile
 824 maintainer-clean-am: distclean-am maintainer-clean-generic
 825
 826 mostlyclean: mostlyclean-recursive
 827
 828 mostlyclean-am: mostlyclean-compile mostlyclean-generic \
 829         mostlyclean-libtool
 830
 831 pdf: pdf-recursive
 832
 833 pdf-am:
 834
 835 ps: ps-recursive
 836
 837 ps-am:
 838
 839 uninstall-am: uninstall-toollibDATA uninstall-toollibLIBRARIES \
 840         uninstall-toollibLTLIBRARIES
 841
 842 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check-am \
 843         ctags-recursive install-am install-strip tags-recursive
 844
 845 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 846         all all-am am--refresh check check-DEJAGNU check-am clean \
 847         clean-generic clean-libtool clean-local clean-toollibLIBRARIES \
 848         clean-toollibLTLIBRARIES ctags ctags-recursive distclean \
 849         distclean-DEJAGNU distclean-compile distclean-generic \
 850         distclean-hdr distclean-libtool distclean-tags dvi dvi-am html \
 851         html-am info info-am install install-am install-data \
 852         install-data-am install-data-local install-dvi install-dvi-am \
 853         install-exec install-exec-am install-html install-html-am \
 854         install-info install-info-am install-man install-pdf \
 855         install-pdf-am install-ps install-ps-am install-strip \
 856         install-toollibDATA install-toollibLIBRARIES \
 857         install-toollibLTLIBRARIES installcheck installcheck-am \
 858         installdirs installdirs-am maintainer-clean \
 859         maintainer-clean-generic mostlyclean mostlyclean-compile \
 860         mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 861         tags tags-recursive uninstall uninstall-am \
 862         uninstall-toollibDATA uninstall-toollibLIBRARIES \
 863         uninstall-toollibLTLIBRARIES
 864
 865
 866 # objects listed later in LIBM_OBJECTLISTS will override those listed earlier
 867 @USE_LIBTOOL_TRUE@libm-libtool-objectlist: $(LIBM_OBJECTLISTS)
 868 @USE_LIBTOOL_TRUE@      cat $(LIBM_OBJECTLISTS) | $(AWK) '{ libm[$$1] = $$2 }; END { for (x in libm) printf ("%s\n", libm[x]) }' > $@
 869
 870 # objects listed later in LIBM_OBJECTLISTS and LIBC_OBJECTLISTS will override those listed earlier
 871 @USE_LIBTOOL_TRUE@libc-libtool-objectlist: $(LIBM_OBJECTLISTS) $(LIBC_OBJECTLISTS)
 872 @USE_LIBTOOL_TRUE@      cat $(LIBM_OBJECTLISTS) $(LIBC_OBJECTLISTS) |  $(AWK) '{ libc[$$1] = $$2 }; END { for (x in libc) printf ("%s\n", libc[x]) }' > $@
 873
 874 @USE_LIBTOOL_FALSE@libc.a: libc/libc.a libm.a
 875 @USE_LIBTOOL_FALSE@     rm -rf libc.a libg.a tmp
 876 @USE_LIBTOOL_FALSE@     mkdir tmp
 877 @USE_LIBTOOL_FALSE@     cd tmp; \
 878 @USE_LIBTOOL_FALSE@      $(AR) x ../libm.a $(MATHOBJS_IN_LIBC) ; \
 879 @USE_LIBTOOL_FALSE@      $(AR) x ../libc/libc.a ; \
 880 @USE_LIBTOOL_FALSE@      $(AR) $(AR_FLAGS) ../$@ *.o
 881 @USE_LIBTOOL_FALSE@     $(RANLIB) libc.a
 882 @USE_LIBTOOL_FALSE@     ln libc.a libg.a >/dev/null 2>/dev/null || cp libc.a libg.a
 883 @USE_LIBTOOL_FALSE@     rm -rf tmp
 884
 885 @USE_LIBTOOL_FALSE@libc/libc.a: ; @true
 886
 887 @USE_LIBTOOL_FALSE@libm.a: libm/libm.a
 888 @USE_LIBTOOL_FALSE@     rm -f $@
 889 @USE_LIBTOOL_FALSE@     ln libm/libm.a $@ >/dev/null 2>/dev/null || cp libm/libm.a $@
 890
 891 @USE_LIBTOOL_FALSE@libm/libm.a: ; @true
 892
 893 crt0.o: $(CRT0_DIR)$(CRT0)
 894         rm -f $@
 895         ln $(CRT0_DIR)$(CRT0) $@ >/dev/null 2>/dev/null \
 896          || cp $(CRT0_DIR)$(CRT0) $@
 897
 898 $(CRT0_DIR)$(CRT0): ; @true
 899
 900 crt1.o: $(CRT1_DIR)$(CRT1)
 901         rm -f $@
 902         ln $< $@ >/dev/null 2>/dev/null \
 903          || cp $< $@
 904
 905 $(CRT1_DIR)$(CRT1): ; @true
 906
 907 $(srcdir)/newlib.hin:
 908
 909 all-recursive: stmp-targ-include
 910
 911 # The targ-include directory just holds the includes files for the
 912 # particular system and machine we have been configured for.  It is
 913 # used while building.
 914 stmp-targ-include: config.status
 915         -rm -rf targ-include stmp-targ-include
 916         mkdir targ-include targ-include/sys targ-include/machine targ-include/bits
 917         cp newlib.h targ-include/newlib.h
 918         -for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \
 919             if [ -f $$i ]; then \
 920               cp $$i targ-include/machine/`basename $$i`; \
 921             else true; fi ; \
 922           done
 923         -for i in $(srcdir)/libc/machine/$(machine_dir)/sys/*.h; do \
 924             if [ -f $$i ]; then \
 925               cp $$i targ-include/sys/`basename $$i`; \
 926             else true; fi ; \
 927           done
 928         -for i in $(srcdir)/libc/machine/$(machine_dir)/include/*.h; do \
 929             if [ -f $$i ]; then \
 930               cp $$i targ-include/`basename $$i`; \
 931             else true; fi ; \
 932           done
 933         -for i in $(srcdir)/libc/sys/$(sys_dir)/include/*.h; do \
 934             if [ -f $$i ]; then \
 935               cp $$i targ-include/`basename $$i`; \
 936             else true; fi ; \
 937           done
 938         -for i in $(srcdir)/libc/sys/$(sys_dir)/include/*; do \
 939             if [ -d $$i ]; then \
 940                 for j in $$i/*.h; do \
 941                     if [ ! -d targ-include/`basename $$i` ]; then \
 942                         mkdir targ-include/`basename $$i`; \
 943                     fi; \
 944                     cp $$j targ-include/`basename $$i`/`basename $$j`; \
 945                 done \
 946             else true; fi ; \
 947           done
 948         -for i in $(srcdir)/libc/sys/$(sys_dir)/sys/*.h; do \
 949             if [ -f $$i ]; then \
 950               cp $$i targ-include/sys/`basename $$i`; \
 951             else true; fi ; \
 952           done
 953         -for i in $(srcdir)/libc/sys/$(sys_dir)/bits/*.h; do \
 954             if [ -f $$i ]; then \
 955               cp $$i targ-include/bits/`basename $$i`; \
 956             else true; fi ; \
 957           done
 958         -for i in $(srcdir)/libc/sys/$(sys_dir)/machine/*.h; do \
 959             if [ -f $$i ]; then \
 960               cp $$i targ-include/machine/`basename $$i`; \
 961             else true; fi ; \
 962           done
 963         -for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/*.h; do \
 964             if [ -f $$i ]; then \
 965               cp $$i targ-include/machine/`basename $$i`; \
 966             else true; fi ; \
 967           done
 968         -for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/include/*.h; do \
 969             if [ -f $$i ]; then \
 970               cp $$i targ-include/machine/`basename $$i`; \
 971             else true; fi ; \
 972           done
 973         touch $@
 974
 975 install-data-local:     install-toollibLIBRARIES
 976 @USE_LIBTOOL_FALSE@     rm -f $(DESTDIR)$(toollibdir)/libg.a
 977 @USE_LIBTOOL_FALSE@     ln $(DESTDIR)$(toollibdir)/libc.a $(DESTDIR)$(toollibdir)/libg.a >/dev/null 2>/dev/null || cp $(DESTDIR)$(toollibdir)/libc.a $(DESTDIR)$(toollibdir)/libg.a
 978         $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
 979         -if [ -z "$(MULTISUBDIR)" ]; then \
 980           $(mkinstalldirs) $(DESTDIR)$(tooldir)/include; \
 981           for i in $(srcdir)/libc/include/*.h; do \
 982            $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
 983           done; \
 984           $(INSTALL_DATA) newlib.h $(DESTDIR)$(tooldir)/include/newlib.h; \
 985           $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/machine; \
 986           for i in $(srcdir)/libc/include/machine/*.h; do \
 987            $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
 988           done; \
 989           for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \
 990             if [ -f $$i ]; then \
 991              $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
 992             else true; fi ; \
 993           done; \
 994           $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/rpc; \
 995           for i in $(srcdir)/libc/include/rpc/*.h; do \
 996            $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/rpc/`basename $$i`; \
 997           done; \
 998           $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/sys; \
 999           for i in $(srcdir)/libc/include/sys/*.h; do \
1000            $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
1001           done; \
1002           for i in $(srcdir)/libc/machine/$(machine_dir)/sys/*.h; do \
1003             if [ -f $$i ]; then \
1004              $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
1005             else true; fi ; \
1006           done ; \
1007           for i in $(srcdir)/libc/machine/$(machine_dir)/include/*.h; do \
1008             if [ -f $$i ]; then \
1009              $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
1010             else true; fi ; \
1011           done ; \
1012           for i in $(srcdir)/libc/sys/$(sys_dir)/sys/*.h; do \
1013             if [ -f $$i ]; then \
1014              $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
1015             else true; fi ; \
1016           done ; \
1017           $(mkinstalldirs) $(DESTDIR)$(tooldir)/include/bits; \
1018           for i in $(srcdir)/libc/sys/$(sys_dir)/bits/*.h; do \
1019             if [ -f $$i ]; then \
1020              $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/bits/`basename $$i`; \
1021             else true; fi ; \
1022           done ; \
1023           for i in $(srcdir)/libc/sys/$(sys_dir)/machine/*.h; do \
1024             if [ -f $$i ]; then \
1025              $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
1026             else true; fi ; \
1027           done ; \
1028           for i in $(srcdir)/libc/sys/$(sys_dir)/include/*.h; do \
1029             if [ -f $$i ]; then \
1030              $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
1031             else true; fi ; \
1032           done ; \
1033           for i in $(srcdir)/libc/sys/$(sys_dir)/include/*; do \
1034             if [ -d $$i ]; then \
1035                 for j in $$i/*.h; do \
1036                     $(INSTALL_DATA) $$j $(DESTDIR)$(tooldir)/include/`basename $$i`/`basename $$j`; \
1037                 done ; \
1038             else true; fi ; \
1039           done ; \
1040           for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/include/*.h; do \
1041             if [ -f $$i ]; then \
1042              $(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
1043             else true; fi ; \
1044           done ; \
1045           for i in $(NO_INCLUDE_LIST); do \
1046             if [ -f $(DESTDIR)$(tooldir)/include/$$i ]; then \
1047                 rm $(DESTDIR)$(tooldir)/include/$$i; \
1048             else true; fi ; \
1049           done ; \
1050         else true; fi
1051
1052 # Force makedoc to be built before building info files.
1053 info-recursive: doc/makedoc
1054 dvi-recursive: doc/makedoc
1055 doc/makedoc:
1056         cd doc && $(MAKE) all
1057
1058 # Multilib support.
1059 .PHONY: all-multi check-multi mostlyclean-multi clean-multi distclean-multi \
1060         maintainer-clean-multi
1061
1062 all-recursive: all-multi
1063 check-recursive: check-multi
1064 mostlyclean-recursive: mostlyclean-multi
1065 clean-recursive: clean-multi
1066 distclean-recursive: distclean-multi
1067 maintainer-clean-recursive: maintainer-clean-multi
1068
1069 # The $(MAKE) comments below are to enable parallel building.
1070 all-multi:
1071         $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
1072 check-multi:
1073         $(MULTIDO) $(AM_MAKEFLAGS) DO=check multi-do # $(MAKE)
1074 mostlyclean-multi:
1075         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
1076 clean-multi:
1077         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
1078 distclean-multi:
1079         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
1080 maintainer-clean-multi:
1081         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
1082
1083 site.exp: Makefile
1084         @echo 'Making a new site.exp file...'
1085         @test ! -f site.bak || rm -f site.bak
1086         @echo '## these variables are automatically generated by make ##' > $@-t
1087         @echo '# Do not edit here.  If you wish to override these values' >> $@-t
1088         @echo '# edit the last section' >> $@-t
1089         @echo 'set tool $(DEJATOOL)' >> $@-t
1090         @echo 'set tool_version $(VERSION)' >> $@-t
1091         @echo 'set srcdir $(srcdir)/testsuite' >> $@-t
1092         @echo 'set objdir' `pwd` >> $@-t
1093         @echo 'set tmpdir' `pwd`/testsuite >> $@-t
1094         @echo 'set multibuildtop ./$(MULTIBUILDTOP)' >> $@-t
1095         @echo 'set host_alias $(build_alias)' >> $@-t
1096         @echo 'set host_triplet $(build_triplet)' >> $@-t
1097         @echo 'set target_alias $(host_alias)' >> $@-t
1098         @echo 'set target_triplet $(host_triplet)' >> $@-t
1099         @echo '## All variables above are generated by configure. Do Not Edit ##' >> $@-t
1100         @test ! -f site.exp || sed '1,/^## All variables above are.*##/ d' site.exp >> $@-t
1101         @test ! -f site.exp || mv site.exp site.bak
1102         @mv $@-t site.exp
1103
1104 check-DEJAGNU: site.exp
1105         @if [ -d testsuite ] ; then \
1106           true ; \
1107         else \
1108           mkdir testsuite ; \
1109         fi
1110         @rm -f testsuite/site.exp
1111         @cp site.exp testsuite/site.exp
1112         @rootme=`pwd` ; \
1113         export rootme ; \
1114         srcdir=`cd ${srcdir}; pwd` ; \
1115         export srcdir ; \
1116         EXPECT=`if [ -f $${rootme}/${MULTIBUILDTOP}../../expect/expect ] ; then \
1117                   echo $${rootme}/${MULTIBUILDTOP}../../expect/expect ; \
1118                 else \
1119                   echo expect ; \
1120                 fi` ; \
1121         export EXPECT ; \
1122         echo "Found expect: $${EXPECT}" ; \
1123         if [ -f $(top_builddir)/$(MULTIBUILDTOP)../../expect/expect ] ; then \
1124           TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd` ; \
1125           export TCL_LIBRARY ; \
1126           echo "Found TCL library directory: $${TCL_LIBRARY}" ; \
1127         fi ; \
1128         RUNTEST=`if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
1129                    echo $${srcdir}/../dejagnu/runtest ; \
1130                  else \
1131                    echo runtest ; \
1132                  fi` ; \
1133         export RUNTEST ; \
1134         echo "Found runtest: $${RUNTEST}" ; \
1135         cd testsuite ; \
1136         if $(SHELL) -c "$$RUNTEST --version" > /dev/null 2>&1 ; then \
1137            $$RUNTEST --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite $(RUNTESTFLAGS) ; \
1138            : ; \
1139         else \
1140            echo "WARNING: could not find \`runtest'" 1>&2 ; \
1141         fi
1142
1143 clean-local:
1144         -rm -rf targ-include
1145
1146 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1147 # Otherwise a system limit (for SysV at least) may be exceeded.
1148 .NOEXPORT: