Peter Korsgaard [Wed, 20 Jul 2011 21:51:17 +0000 (23:51 +0200)]
zlib: always build host version dynamically
Host libraries should always be built using dynamic linking, rather than
static if BR2_PREFER_STATIC_LIB is enabled, as that then breaks dependent
libraries expecting a shared library.
Reported-by: Andy Kennedy <andy.kennedy@adtran.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Wed, 20 Jul 2011 14:30:14 +0000 (16:30 +0200)]
initramfs: fix boot with dynamic /dev
Devtmpfs (which is used by devtmpfs/mdev/udev options) doesn't get
automounted by the kernel when an initramfs is used, causing boot
failures when a dynamic /dev is used.
Fix it by adding a pre-init script to mount devtmpfs before running init.
Reported-by: Arnout Vandecappelle <arnout@mind.be> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Phil Edworthy [Mon, 9 May 2011 13:12:53 +0000 (14:12 +0100)]
sh: Fix Buildroot sh targets to match gnuconfig targets
sh2eb and sh2a_nofpueb gnuconfig targets are no longer supported
in Buildroot. This patch replaces these Buildroot targets with sh2
and sh2a respectively, and adds sh4a targets as these are widely
used.
To build for devices without an fpu, the relevant toolchain flags
will have to be specified.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Sven Neumann [Wed, 13 Jul 2011 16:54:48 +0000 (18:54 +0200)]
gvfs: drop dbus-glib dependency
Drop the dbus-glib dependency as gvfs uses dbus directly.
Also change dependency on the XML parser for dbus to be more
in sync with the dbus package.
[Peter: drop expat|libxml2 deps as shared-mime-type already selects libxml2] Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Sven Neumann [Thu, 14 Jul 2011 07:10:55 +0000 (09:10 +0200)]
gnutls: update to version 2.10.3
There are newer releases available, but this is the last release that
uses libgcrypt. Newer versions prefer nettle over gcrypt. But then there
are users of gnutls (for example libsoup and glib-networking) that
assume that gnutls uses gcrypt as its crypto backend. They won't compile
with a version of gnutls that uses nettle.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
'source-check' breaks because the *_DEFCONFIG options are empty strings.
There is an explicit check to avoid erroring-out when doing 'source', but
not when doing 'source-check'.
This patch set DL_MODE right from the first sub-make call.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
toolchain/crosstool-ng: allow pre-downloading the sources
On "make source", just download the required sources, and do not
build the entire toolchain. This requires a new patch against
crosstool-NG (got from upstream).
The "uclibc-source" rule requires an installed and configured
crosstool-NG, so it has to be after the variables declaration.
For consistency, move down the main rule "uclibc".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Phil Edworthy [Fri, 6 May 2011 14:23:04 +0000 (15:23 +0100)]
sh: Add SH2A CodeSourcery external toolchain
Added the CodeSourcery uCLinux/uClibc toolchain for the SH2A big
endian devices.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Allan W. Nielsen [Tue, 10 May 2011 06:17:05 +0000 (08:17 +0200)]
Makefile.package.in: Add BR2_XZCAT for LZMA compression type
Signed-off-by: Allan W. Nielsen <a@awn.dk> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thomas Petazzoni [Mon, 11 Jul 2011 20:46:16 +0000 (22:46 +0200)]
linux: add support for 3.x and -rc versions
The assumption that all kernels are in
http://www.kernel.org/pub/linux/kernel/v2.6/ is no longer true:
versions 3.x are in separate directories.
We now compute the directory name from the major and minor versions of
the version provided by the user. This assumes that the 3.1 version
will be in a /v3.1/ directory, which we don't know yet because the 3.1
cycle hasn't started yet.
At the same time, we add support for the official -rcX versions.
Patch tested by compiling 3.0-rc6, which Buildroot has successfully
downloaded and built.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Philippe Reynes [Mon, 11 Jul 2011 20:46:13 +0000 (22:46 +0200)]
Add x-loader bootloader
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
merge xloader Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thomas Petazzoni [Mon, 11 Jul 2011 20:46:10 +0000 (22:46 +0200)]
Improve TARGETS handling for bootloaders and kernel
As the kernel and bootloaders do not use the normal BR2_PACKAGE_*
Kconfig options, their target name was not automatically added to the
global TARGETS variable. Each bootloader .mk and the linux.mk had to
add their own target manually to TARGETS, and the package
infrastructure was making tests on non-existing Kconfig variables.
This commit improves the package infrastructure so that it looks at
BR2_PACKAGE_<pkg> for packages, BR2_TARGET_<pkg> for bootloaders and
at the special BR2_LINUX_KERNEL for the linux package.
This allows to simplify a little bit the bootloaders and linux .mk
files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thomas Petazzoni [Mon, 11 Jul 2011 20:46:09 +0000 (22:46 +0200)]
u-boot: rename to uboot
This will allow to match the currently Config.in option
BR2_TARGET_UBOOT, in order to make it easy to integrate U-Boot into
the package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thomas Petazzoni [Mon, 11 Jul 2011 20:17:16 +0000 (22:17 +0200)]
valgrind: bump to 3.6.1 and add support for ARMv7
We removed the shell script that wrapped valgrind (not nice to install
such non-standard things), and will let the user use the uclibc.supp
suppression file if needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without an mdev.conf file installed, mdev generates some /dev entries in
an incorrect or non-standard way. Some examples:
1. /dev/null has permissions 660, but it should be accessible to normal
users;
2. alsa devices get created in /dev, not /dev/snd as is more common,
and as the default value of BR2_PACKAGE_ALSA_LIB_DEVDIR suggests;
3. event<N> files are created in /dev, not /dev/input.
This mdev.conf is a selection from the examples provided in the busybox
sources with minor tweaks.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Will Newton [Fri, 8 Jul 2011 13:19:16 +0000 (14:19 +0100)]
package: add libnss
NSS is the Network Security Services library developed as part of
the Mozilla project. It provides similar functions to OpenSSL but
allows MPL, GPL and LGPL licensing.
[Peter: fix target install] Signed-off-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mkimage for the host is now built by a package, so that
boot/u-boot/u-boot.mk is no longer responsible for doing this. It
makes things a lot easier to handle, as linux/linux.mk now simply
depends on host-uboot-mkimage.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The feature of building mkimage for the target is removed, it wasn't
building with current U-Boot, and doesn't make a lot of sense (mkimage
is needed only to prepare a kernel image, or an U-Boot script).
The feature of building mkimage for the host is moved to a proper
package. It duplicates a few things (U-Boot URL, etc.) but it makes
things a lot cleaner than having it handled by boot/u-boot/u-boot.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libxml2 dependency is new in this version, and does not behave nicely with
cross compile. The configure script looks for the host xml2-config. Add
'--disable-xml2' as a workaround for now.
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Grub 2 has been marked BROKEN in June 2010, and nobody cared to fix it
since then.
At that time, it was marked broken because the build process needed a
Ruby interpreter available on the host, and it's really a pain that
building a bootloader needs such a thing.
I've tried to upgrade the package to Grub2 1.99-rcX, and now it does
not need a Ruby interpreter anymore, but instead requires a tool
called "autogen", which itself needs the Guile Scheme interpreter.
Since we haven't heard any complaints about Grub2 being marked broken,
and since it's such a pain to package, let's get rid of it. Of course,
anybody interested in Grub2 is invited to contribute a working
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Moreover, the installation of pxelinux and/or isolinux is now handled
as suboptions, like we traditionally do for other packages. This allows
to have a single option (BR2_TARGET_SYSLINUX) that enables the
syslinux package.
[Peter: drop basename in install step] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit converts the at91dataflashboot bootloader build process to
GENTARGETS. It also does the following changes :
* As the package directory name is at91dataflashboot, the
configuration options and make variables are renamed to
AT91DATAFLASHBOOT instead of DATAFLASHBOOT.
* Since the board selection in Kconfig wasn't used anywhere, get rid
of it. at91dataflashboot is only for AT91RM9200 apparently anyway.
[Peter: add ':=' -> '=' change] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patching procedure was using $($(NOHOSTPKG)_NAME) to find the name
of the package without the host- prefix for host packages, which is
needed to find the package directory and the prefix of the patches.
However, this $($(NOHOSTPKG)_NAME) variable is empty when there is
only an host variant for the package and no target variant for it.
Therefore, instead of using this $($(NOHOSTPKG)_NAME) variable, we now
use a new $(RAWNAME) variable, which is always the name of the package
without the host- prefix, even for host packages.
Thanks to Yann E. Morin for providing the tip on using patsubst
instead of subst.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
projects / coffee / buildroot.git / log