Yann E. MORIN [Sat, 27 Aug 2011 21:07:42 +0000 (23:07 +0200)]
toolchain/crosstool-NG: fix bundled config files
Bundled config files have architecture-specific values in them,
which may break if buildroot is configured with another architecture
that does not forcibly set these option.
For example, the bundled config files are for x86_64, and define:
CT_ARCH_TUNE="generic"
This comes from the BR2_GCC_TARGET_TUNE config option (in buildroot) that
is set accordingly to the selected (arch,sub-arch).
But if someone configures buildroot for, say, generic ARM, then the
BR2_GCC_TARGET_TUNE config option is not set, and the crosstool-NG backend
Makefile believes it should not be pushed down to the crosstool-NG config
file.
BUT...
The crosstool-NG backend Makefile can not forcibly push BR2_GCC_TARGET_TUNE
down to the CT-NG config file. If BR2_GCC_TARGET_TUNE is empty, the user can
still set CT_ARCH_TUNE by running ctng-menuconfig.
The backend Makefile already passes such values only if they are set.
In the end, we can't push options as-is to the crosstool-NG config, but we
MUST provide sane bundled config files, which this patch does.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ncurses: fix hanging installation due to old version of tic
Closes #3685
During installation of ncurses, the 'tic' program from the host is used. In
some cases, this version of tic is too old for the data to be processed, and
the installation hangs indefinitely (already reported in July 2010, see [1])
With this patch, a static version of tic is built and used during the
installation step of target ncurses. This method is based on a similar fix
in Gentoo Linux (see [2] for the report and [3] for the solution).
[Peter: Install into host, don't tweak path] Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
barebox: add barebox-<n/x/menu>config and barebox-savedefconfig support
[Peter: only activate if barebox is enabled, fix deps] Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Mon, 15 Aug 2011 10:43:22 +0000 (12:43 +0200)]
udev: ensure /dev mgmt option is in sync
These options should be in sync, both for consistency and because udev
needs devtmpfs enabled in the kernel.
We unfortunately cannot just select BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
here, as that one selects udev - leading to recursion erors, so instead
we use depends on.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Heiko Helmle [Fri, 12 Aug 2011 19:14:28 +0000 (21:14 +0200)]
libxml-parser-perl: fix install bug
This patch makes libxml-parser-perl behave on my system - though it looks
like it isn't necessary on all host OSses (on gentoo and opensuse it works
without, but on ubuntu lucid and Scientific 6 it fails without the patch).
Signed-off-by: Heiko Helmle <helman@gmx.net> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Maxime Ripard [Fri, 12 Aug 2011 12:22:56 +0000 (14:22 +0200)]
Fix the Python build when running Linux 3.*
When compiling Python on a host running Linux 3.0, the sys.platform
constant is set at "linux3". A lot of code (inside the interpreter
itself, its build system and third party apps and libraries) relies on
it to be linux2 on a Linux system.
This leads to the build of the target python package to break.
This behaviour has been reported on the Python bugtracker but is not
fixed yet.
http://bugs.python.org/issue12326
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Sven Neumann [Thu, 11 Aug 2011 10:44:07 +0000 (12:44 +0200)]
directfb: bump to version 1.4.13
There's an even newer stable release available (1.4.14), but it
has problems with cross-compilation that we are still resolving
on the directfb-dev mailing-list.
[Peter: rename ppc patch to match] Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Fri, 12 Aug 2011 07:45:50 +0000 (09:45 +0200)]
util-linux: fix install when locales are enabled
util-linux uses mkinstalldirs to install .po files when locales are
enabled, but the definition of MKINSTALLDIRS comes from a tweaked
nls.m4 (based on the one from gettext).
When we autoreconf the package, we end up using the system (staging)
version of nls.m4, so MKINSTALLDIRS doesn't get defined.
Fix it by passing a definition of MKINSTALLDIRS to make during the
install steps.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Sven Neumann [Fri, 5 Aug 2011 08:52:27 +0000 (10:52 +0200)]
libsoup: bump to 2.32.2
Buildroot should use a stable release, not use an unstable development
version. Updating to the current stable branch (2.34) is not trivial,
so at least use the latest release from the stable 2.32 branch.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
toolchain-external: fix some typos CodeSoucery -> CodeSourcery
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
initramfs/init: make sure that 0, 1, 2 fds are available
As the kernel doesn't automatically mount devtmpfs when an initramfs
is used, commit 424888e47431db738f5f9b3c6392435bfce7a842 has
introduced a small wrapper script that mounts devtmpfs before starting
the real init.
Unfortunately, the problem is that in this case, the init process runs
without any 0, 1 and 2 file descriptors, so none of the
messages/errors printed by the various initialization scripts can be
seen. This is due to the fact the init process relies on 0, 1 and 2
being opened by the kernel before init is started. However, as
/dev/console isn't present on the filesystem at the time the kernel
tries to open the console to create the 0, 1 and 2 file descriptors,
the kernel fails on this and prints the famous "Warning: unable to
open an initial console".
The proposed workaround is to actually open 0, 1 and 2 to /dev/console
in the wrapper script, right after mounting the devtmpfs filesystem,
and before starting the real init. The "Warning" from the kernel is
still shown, but at least the messages from the init scripts are
visible.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
993e51bc22f508fbaf39c5c49fd0595fc5c56013 introduced a <pkg>_DL_VERSION
in addition to <pkg>_VERSION. This variable, purely internal to the
package infrastructure, allows to store the *raw* version name, as
defined in the package .mk file. However, as this version string can
contain slashes, it is not appropriate to be part of the build
directory name of the package. This is why <pkg>_VERSION is defined to
be the same thing as <pkg>_DL_VERSION, except that slashes are
replaced by underscores.
However, the initial implementation didn't take into account the case
of host packages. So 763822e874fd8d39b591feaa9639f76183897fb7 was
committed to fix this. But unfortunately, this commit got it wrong
again: it forgot the case where <pkg>_VERSION is set, but not
HOST_<pkg>_VERSION. In this case, HOST_<pkg>_DL_VERSION remained
empty. This can be seen for example by building host-sstrip.
This problem has been noticed by Julien Boibessot
<julien.boibessot@free.fr>, who also helped in fixing the
issue. Thanks!
The fix is simply to ensure that <pkg>_DL_VERSION is properly set in
all cases: when HOST_<pkg>_VERSION is defined, when only <pkg>_VERSION
is defined, and when no version is defined.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the following command flow:
make distclean
make <board>_defconfig
make source
the dl directory would normally be created by the first wget download. If there are no such downloads, e.g. because you use a local download mirror (e.g. scp, file) or only use git/svn/hg/bzr repositories, the dl directory is not created automatically. This causes e.g. the 'pushd' command in the respective _DOWNLOAD commands to fail.
This patch adds a dependency to the 'dirs' target to 'source', fixing this scenario.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Sven Neumann [Sun, 31 Jul 2011 20:18:39 +0000 (22:18 +0200)]
libsoup: add patch to fix CVE-2011-2054
Fixes a security hole that caused some SoupServer users to
unintentionally allow accessing the entire local filesystem when
they thought they were only providing access to a single directory.
This is the change from libsoup-2.34.3 backported to 2.32.2. It
doesn't include the changes to the test suite though.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Fri, 29 Jul 2011 06:53:55 +0000 (08:53 +0200)]
util-linux: drop BR2_PACKAGE_BUSYBOX_SHOW_OTHERS dependency
Drop the dependency as it isn't really nice that other packages need
to select it, and kconf complains about it:
warning: (BR2_PACKAGE_E2FSPROGS && BR2_PACKAGE_USBMOUNT) selects
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS which has unmet direct dependencies
(!BR2_PACKAGE_BUSYBOX)
Instead ensure that only the libraries are built by default, so
busybox applets are still used unless explicitly configured.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Thu, 28 Jul 2011 15:58:50 +0000 (17:58 +0200)]
e2fsprogs: use libblkid / blkid from util-linux
e2fsprogs and util-linux both provide blkid / libblkid causing conflicts
if both are enabled. The preferred upstream (E.G. what is used by Debian)
is util-linux, so remove the options from e2fsprogs and make it use the
util-linux version instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Wed, 27 Jul 2011 09:51:47 +0000 (11:51 +0200)]
uClibc: drop BR2_PROGRAM_INVOCATION option
Remove the BR option and enable the configuration setting in the
uClibc defconfigs.
The BR2_PROGRAM_INVOCATION option only adds very little overhead to
uClibc, and we have a number of packages needing it, so simply always
enable it - Simplifying the kconfig logic and the number of choices
users have to make.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Tue, 26 Jul 2011 13:28:19 +0000 (15:28 +0200)]
toolchain-external: sync toolchain options with the internal toolchain
The internal toolchain defaults to thread support enabled (and
most external toolchains have thread support as well), so enable
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS by default.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Mon, 25 Jul 2011 21:06:29 +0000 (23:06 +0200)]
package: remove hal
Hal is deprecated upstream, our package has not seen any significant
work since it was added in 2007, nothing depends on it and it's blocking
a long-overdue udev update.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Baruch Siach [Thu, 23 Jun 2011 09:21:21 +0000 (12:21 +0300)]
toolchain: add user defined target LDFLAGS options
Allow the user to specify additional options for the target LDFLAGS.
I use this to pass the -te500v2 option to the linker, when using the
CodeSourcery toolchain for PowerPC. This chooses the correct CRT for e500 hard
float. Otherwise I get errors like
undefined reference to `_save32gpr_31'
undefined reference to `_rest32gpr_31_x'
at final link time.
[Peter: fixup, use qstrip] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add BR2_ROOTFS_STATIC_DEVICE_TABLE for the extra device table file(s)
to create device nodes in /dev, rather than complicated logic in
BR2_ROOTFS_DEVICE_TABLE, making it complicated to move between static
and dynamic modes.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Sven Neumann [Thu, 14 Jul 2011 07:32:39 +0000 (09:32 +0200)]
orc: new package
Orc - the Oil Runtime Compiler - is the successor of liboil.
There's a runtime library that is installed in staging and target
and there's a host version that can be built if orcc, the ORC
compiler is needed at build time.
[Peter: minor tweaks] Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Sven Neumann [Fri, 15 Jul 2011 22:33:00 +0000 (00:33 +0200)]
gst-plugins-ugly: fix dependencies for mad MP3 decoder plug-in
The mad plug-in depends on libid3tag. This dependency used to be
implicit by selecting the id3tag plug-in. Now that this plug-in
is not any longer part of gst-plugins-ugly we need an explicit
dependency on libid3tag.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
CCOPTS is also used for HOSTCC in the netem/ directory which contains
host tools so just ditch it there to avoid extra non-native
optimizations to sweep by.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
projects / coffee / buildroot.git / log