configs/qemu: bump to the latest kernel version

Xtensa patches no longer required, the make target name changed
to Image. The Qemu binary for OpenRisc was renamed upstream.
I removed the x86->x86_64 symlink, independent files preferred.

Defconfig               Kernel  Qemu            Network Status
--------------------------------------------------------------
aarch64_virt            4.11.3   2.9.0           YES     OK
arm_versatile           4.11.3   2.9.0           YES     OK
arm_versatile_nommu     4.4.70   2.9.0           YES     OK
arm_vexpress            4.11.3   2.9.0           YES     OK
m68k_mcf5208            4.11.3   2.9.0           YES     OK
m68k_q800               4.11.3   q800-v2.4.0     NO (2)  OK
microblazebe            4.11.3   2.9.0           YES     OK
microblazeel            4.11.3   2.9.0           YES     OK
mips32r2el_malta        4.11.3   2.9.0           YES     OK
mips32r2_malta          4.11.3   2.9.0           YES     OK
mips32r6el_malta        4.11.3   2.9.0           YES     OK
mips32r6_malta          4.11.3   2.9.0           YES     OK
mips64el_malta          4.11.3   2.9.0           YES     OK
mips64_malta            4.11.3   2.9.0           YES     OK
mips64r6el_malta        4.11.3   2.9.0           YES     OK
mips64r6_malta          4.11.3   2.9.0           YES     OK
nios2-10m50             4.11.3   2.9.0           NO      OK
or1k                    4.11.3   2.9.0           NO      OK (5)
ppc_g3beige             4.11.3   2.9.0           YES     OK
ppc_mpc8544ds           4.11.3   2.9.0           YES     OK
ppc_virtex_ml507        4.9.6    2.9.0           NO      OK (3)
ppc64_pseries           4.11.3   2.9.0           YES     OK
sh4                     4.9.6    2.9.0           YES     OK (4)
sh4eb                   4.9.6    2.9.0           NO (1)  OK (4)
sparc_ss10              4.11.3   2.9.0           YES     OK
sparc64_sun4u           4.11.3   2.9.0           YES     OK
sparc_sun4u             4.11.3   2.9.0           YES     OK
x86                     4.11.3   2.9.0           YES     OK
x86_64                  4.11.3   2.9.0           YES     OK
xtensa_lx60             4.11.3   2.9.0           YES     OK
xtensa_lx60_nommu       4.11.3   2.9.0           YES     OK

(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Kernel oops with 4.11.3 on boot
(4) - System is extremely slow with 4.11.3, needs further investigation
(5) - Qemu binary got renamed to qemu-system-or1k

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

diff --git a/board/qemu/aarch64-virt/linux-4.9.config b/board/qemu/aarch64-virt/linux-4.11.config
similarity index 100%
rename from board/qemu/aarch64-virt/linux-4.9.config
rename to board/qemu/aarch64-virt/linux-4.11.config

diff --git a/board/qemu/aarch64-virt/readme.txt b/board/qemu/aarch64-virt/readme.txt
index 1c4c7f9ccb9fa5081fdda409796fd48156cdaa3b..ece8a536a73f91000ba90f9bef161bce1f78327d 100644 (file)
--- a/board/qemu/aarch64-virt/readme.txt
+++ b/board/qemu/aarch64-virt/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.6.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/arm-versatile/linux-4.9.config b/board/qemu/arm-versatile/linux-4.11.config
similarity index 100%
rename from board/qemu/arm-versatile/linux-4.9.config
rename to board/qemu/arm-versatile/linux-4.11.config

diff --git a/board/qemu/arm-versatile/readme.txt b/board/qemu/arm-versatile/readme.txt
index c8ea4cda85f0957cd16c7b7abed71c375a1ea705..6e899f4b5f8d602f2eb9da819db67287b10343a4 100644 (file)
--- a/board/qemu/arm-versatile/readme.txt
+++ b/board/qemu/arm-versatile/readme.txt
@@ -9,4 +9,4 @@ Or for the noMMU emulation:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/arm-vexpress/readme.txt b/board/qemu/arm-vexpress/readme.txt
index 99812b9a0fa26421359353e5e50b75370086fd83..57bb81419800ecdb7c223f54e3a0bf32de2f4103 100644 (file)
--- a/board/qemu/arm-vexpress/readme.txt
+++ b/board/qemu/arm-vexpress/readme.txt
@@ -8,4 +8,4 @@ graphical window is the framebuffer.
 If you want to emulate more cores change "-smp 1" to "-smp 2" for
 dual-core or even "smp -4" for a quad-core configuration.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/m68k-mcf5208/linux-4.8.config b/board/qemu/m68k-mcf5208/linux-4.11.config
similarity index 100%
rename from board/qemu/m68k-mcf5208/linux-4.8.config
rename to board/qemu/m68k-mcf5208/linux-4.11.config

diff --git a/board/qemu/m68k-mcf5208/readme.txt b/board/qemu/m68k-mcf5208/readme.txt
index 00deb2c39c83810aa22c6038241fbe30d6e4e911..014a0dc09fd556c8e48582b5bd7e4b3ec023d5f2 100644 (file)
--- a/board/qemu/m68k-mcf5208/readme.txt
+++ b/board/qemu/m68k-mcf5208/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/m68k-q800/linux-4.9.config b/board/qemu/m68k-q800/linux-4.11.config
similarity index 100%
rename from board/qemu/m68k-q800/linux-4.9.config
rename to board/qemu/m68k-q800/linux-4.11.config

diff --git a/board/qemu/microblazebe-mmu/linux-4.9.config b/board/qemu/microblazebe-mmu/linux-4.11.config
similarity index 100%
rename from board/qemu/microblazebe-mmu/linux-4.9.config
rename to board/qemu/microblazebe-mmu/linux-4.11.config

diff --git a/board/qemu/microblazebe-mmu/readme.txt b/board/qemu/microblazebe-mmu/readme.txt
index 25fc35ca19c226a4614fdd7194c0ffebe7b071c0..cf0afdaff851e1e49e3f1362283a4f727831c087 100644 (file)
--- a/board/qemu/microblazebe-mmu/readme.txt
+++ b/board/qemu/microblazebe-mmu/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/microblazeel-mmu/linux-4.9.config b/board/qemu/microblazeel-mmu/linux-4.11.config
similarity index 100%
rename from board/qemu/microblazeel-mmu/linux-4.9.config
rename to board/qemu/microblazeel-mmu/linux-4.11.config

diff --git a/board/qemu/microblazeel-mmu/readme.txt b/board/qemu/microblazeel-mmu/readme.txt
index 1a77a56ff37f26f1a8e6967bad4b9b5e68bf6f91..9edf101afdcfaecb4016c5074221aba077334e65 100644 (file)
--- a/board/qemu/microblazeel-mmu/readme.txt
+++ b/board/qemu/microblazeel-mmu/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/mips32r2-malta/linux-4.9.config b/board/qemu/mips32r2-malta/linux-4.11.config
similarity index 100%
rename from board/qemu/mips32r2-malta/linux-4.9.config
rename to board/qemu/mips32r2-malta/linux-4.11.config

diff --git a/board/qemu/mips32r2-malta/readme.txt b/board/qemu/mips32r2-malta/readme.txt
index 13f8910b2ff0636f29bdb3f88288bad462ecba77..7002ab1d86f069232cf79f98f11ff1310d0b794f 100644 (file)
--- a/board/qemu/mips32r2-malta/readme.txt
+++ b/board/qemu/mips32r2-malta/readme.txt
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/mips32r2el-malta/linux-4.9.config b/board/qemu/mips32r2el-malta/linux-4.11.config
similarity index 100%
rename from board/qemu/mips32r2el-malta/linux-4.9.config
rename to board/qemu/mips32r2el-malta/linux-4.11.config

diff --git a/board/qemu/mips32r2el-malta/readme.txt b/board/qemu/mips32r2el-malta/readme.txt
index 5c4bbda6a48d2987d40b35629a099e588d42f8e3..bfc9c49d5a6b91620cba1da27c9cb67f900a5848 100644 (file)
--- a/board/qemu/mips32r2el-malta/readme.txt
+++ b/board/qemu/mips32r2el-malta/readme.txt
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/mips32r6-malta/linux-4.9.config b/board/qemu/mips32r6-malta/linux-4.11.config
similarity index 100%
rename from board/qemu/mips32r6-malta/linux-4.9.config
rename to board/qemu/mips32r6-malta/linux-4.11.config

diff --git a/board/qemu/mips32r6-malta/readme.txt b/board/qemu/mips32r6-malta/readme.txt
index 107c47d8d28aa43e887214c52da6d1e52705a2e6..7d79c6602ce6b87ee440b928d6acde7e957ddb96 100644 (file)
--- a/board/qemu/mips32r6-malta/readme.txt
+++ b/board/qemu/mips32r6-malta/readme.txt
@@ -4,4 +4,4 @@ qemu-system-mips -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -d
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.6.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/mips32r6el-malta/linux-4.9.config b/board/qemu/mips32r6el-malta/linux-4.11.config
similarity index 100%
rename from board/qemu/mips32r6el-malta/linux-4.9.config
rename to board/qemu/mips32r6el-malta/linux-4.11.config

diff --git a/board/qemu/mips32r6el-malta/readme.txt b/board/qemu/mips32r6el-malta/readme.txt
index e29115f70254508df54448d819813748392e09ca..78f83505067224b9112ff746ce61493fa050bd36 100644 (file)
--- a/board/qemu/mips32r6el-malta/readme.txt
+++ b/board/qemu/mips32r6el-malta/readme.txt
@@ -4,4 +4,4 @@ qemu-system-mipsel -M malta -cpu mips32r6-generic -kernel output/images/vmlinux
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.6.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/mips64-malta/linux-4.8.config b/board/qemu/mips64-malta/linux-4.11.config
similarity index 100%
rename from board/qemu/mips64-malta/linux-4.8.config
rename to board/qemu/mips64-malta/linux-4.11.config

diff --git a/board/qemu/mips64-malta/readme.txt b/board/qemu/mips64-malta/readme.txt
index a89985ddeac94623a71562e493a8c15218ba8760..8a732101a8da2ca6c001f8ded0fba9f8d7e120c3 100644 (file)
--- a/board/qemu/mips64-malta/readme.txt
+++ b/board/qemu/mips64-malta/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/mips64el-malta/linux-4.9.config b/board/qemu/mips64el-malta/linux-4.11.config
similarity index 100%
rename from board/qemu/mips64el-malta/linux-4.9.config
rename to board/qemu/mips64el-malta/linux-4.11.config

diff --git a/board/qemu/mips64r6-malta/linux-4.9.config b/board/qemu/mips64r6-malta/linux-4.11.config
similarity index 100%
rename from board/qemu/mips64r6-malta/linux-4.9.config
rename to board/qemu/mips64r6-malta/linux-4.11.config

diff --git a/board/qemu/mips64r6el-malta/linux-4.9.config b/board/qemu/mips64r6el-malta/linux-4.11.config
similarity index 100%
rename from board/qemu/mips64r6el-malta/linux-4.9.config
rename to board/qemu/mips64r6el-malta/linux-4.11.config

diff --git a/board/qemu/mips64r6el-malta/readme.txt b/board/qemu/mips64r6el-malta/readme.txt
index b1dc23a22f22c53381c9f96763a8885dc456af49..9250cf37919f3afd1dfbb2c2076b8cf82fd9fbe5 100644 (file)
--- a/board/qemu/mips64r6el-malta/readme.txt
+++ b/board/qemu/mips64r6el-malta/readme.txt
@@ -4,7 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.6.0
-
-Might work with 2.6.0 by changing the -cpu entry to MIPS64R6-generic
-since the naming was updated and the old name removed in 2.7.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/nios2-10m50/linux-4.9.fragment b/board/qemu/nios2-10m50/linux-4.11.fragment
similarity index 100%
rename from board/qemu/nios2-10m50/linux-4.9.fragment
rename to board/qemu/nios2-10m50/linux-4.11.fragment

diff --git a/board/qemu/nios2-10m50/readme.txt b/board/qemu/nios2-10m50/readme.txt
index 978ba95cbec2c91bbbb87e21532a67101b4fbfa7..f7dee370f7e3100c668b5cbc685fc8104102647c 100644 (file)
--- a/board/qemu/nios2-10m50/readme.txt
+++ b/board/qemu/nios2-10m50/readme.txt
@@ -4,6 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with the upcoming QEMU 2.9.0 [1]
-
-[1] http://git.qemu.org/?p=qemu.git;h=ae5045ae5b2bbd8ce1335d1b05f9ecacca83a6cf
+Tested with QEMU 2.9.0.

diff --git a/board/qemu/or1k/linux-4.9.config b/board/qemu/or1k/linux-4.11.config
similarity index 100%
rename from board/qemu/or1k/linux-4.9.config
rename to board/qemu/or1k/linux-4.11.config

diff --git a/board/qemu/or1k/patches/linux/0001-ld-or1k.patch b/board/qemu/or1k/patches/linux/0001-ld-or1k.patch
deleted file mode 100644 (file)
index aba2463..0000000
--- a/board/qemu/or1k/patches/linux/0001-ld-or1k.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-OpenRISC arch name was in the beginning or32
-
-Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
-
-diff -Nur linux-4.4.5.orig/arch/openrisc/kernel/vmlinux.lds.S linux-4.4.5/arch/openrisc/kernel/vmlinux.lds.S
---- linux-4.4.5.orig/arch/openrisc/kernel/vmlinux.lds.S        2016-03-10 00:35:58.000000000 +0100
-+++ linux-4.4.5/arch/openrisc/kernel/vmlinux.lds.S     2016-03-16 09:21:07.933535532 +0100
-@@ -30,7 +30,7 @@
- #include <asm/cache.h>
- #include <asm-generic/vmlinux.lds.h>
- 
--OUTPUT_FORMAT("elf32-or32", "elf32-or32", "elf32-or32")
-+OUTPUT_FORMAT("elf32-or1k", "elf32-or1k", "elf32-or1k")
- jiffies = jiffies_64 + 4;
- 
- SECTIONS

diff --git a/board/qemu/or1k/patches/linux/0002-kallsyms.patch b/board/qemu/or1k/patches/linux/0002-kallsyms.patch
deleted file mode 100644 (file)
index e788a7a..0000000
--- a/board/qemu/or1k/patches/linux/0002-kallsyms.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From: https://lkml.org/lkml/2016/12/31/13
-
-The build robot reports:
-
-   .tmp_kallsyms1.o: In function `kallsyms_relative_base':
->> (.rodata+0x8a18): undefined reference to `_text'
-
-This is when using 'make alldefconfig'. Adding this _text symbol to mark
-the start of the kernel as in other architecture fixes this.
-
-Signed-off-by: Stafford Horne <shorne@gmail.com>
-Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
-
-diff -Nur linux-4.9.orig/arch/openrisc/kernel/vmlinux.lds.S linux-4.9/arch/openrisc/kernel/vmlinux.lds.S
---- linux-4.9.orig/arch/openrisc/kernel/vmlinux.lds.S  2016-12-11 20:17:54.000000000 +0100
-+++ linux-4.9/arch/openrisc/kernel/vmlinux.lds.S       2017-01-01 12:13:43.039107518 +0100
-@@ -38,6 +38,8 @@
-         /* Read-only sections, merged into text segment: */
-         . = LOAD_BASE ;
- 
-+      _text = .;
-+
-       /* _s_kernel_ro must be page aligned */
-       . = ALIGN(PAGE_SIZE);
-       _s_kernel_ro = .;

diff --git a/board/qemu/or1k/readme.txt b/board/qemu/or1k/readme.txt
index 53c66ad9895d8d362d82d7d9c1075af85318dbfd..a04314e75099a84178e806266134ea9c9efc1b64 100644 (file)
--- a/board/qemu/or1k/readme.txt
+++ b/board/qemu/or1k/readme.txt
@@ -1,9 +1,9 @@
 Run the emulation with:
 
- qemu-system-or32 -kernel output/images/vmlinux -nographic
+ qemu-system-or1k -kernel output/images/vmlinux -nographic
 
 The login prompt will appear in the terminal that started Qemu.
 
 Ethernet support is not working, yet.
 
-Tested with QEMU 2.8.0.
+Tested with QEMU 2.9.0.

diff --git a/board/qemu/ppc-g3beige/linux-4.9.config b/board/qemu/ppc-g3beige/linux-4.11.config
similarity index 100%
rename from board/qemu/ppc-g3beige/linux-4.9.config
rename to board/qemu/ppc-g3beige/linux-4.11.config

diff --git a/board/qemu/ppc-g3beige/readme.txt b/board/qemu/ppc-g3beige/readme.txt
index 3bd88a6e391f61a34c5b7208d2c3b52f44e53352..42c97a0c144a2b058bf41c430ef93df315a65ba0 100644 (file)
--- a/board/qemu/ppc-g3beige/readme.txt
+++ b/board/qemu/ppc-g3beige/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/ppc-mpc8544ds/linux-4.9.config b/board/qemu/ppc-mpc8544ds/linux-4.11.config
similarity index 100%
rename from board/qemu/ppc-mpc8544ds/linux-4.9.config
rename to board/qemu/ppc-mpc8544ds/linux-4.11.config

diff --git a/board/qemu/ppc-mpc8544ds/readme.txt b/board/qemu/ppc-mpc8544ds/readme.txt
index d8f31cbc94a555a039ceddeca6319f3b36476ab7..0008c84b20196c971cdd6b12ab5bddbd298fe334 100644 (file)
--- a/board/qemu/ppc-mpc8544ds/readme.txt
+++ b/board/qemu/ppc-mpc8544ds/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/ppc64-pseries/readme.txt b/board/qemu/ppc64-pseries/readme.txt
index 94fa228b4bf24e6afb724b4a6b919e820e084291..7cc0c67d6119efbb512010b9735ac1278e1af701 100644 (file)
--- a/board/qemu/ppc64-pseries/readme.txt
+++ b/board/qemu/ppc64-pseries/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/sh4-r2d/linux-4.9.config b/board/qemu/sh4-r2d/linux-4.11.config
similarity index 100%
rename from board/qemu/sh4-r2d/linux-4.9.config
rename to board/qemu/sh4-r2d/linux-4.11.config

diff --git a/board/qemu/sh4eb-r2d/linux-4.9.config b/board/qemu/sh4eb-r2d/linux-4.11.config
similarity index 100%
rename from board/qemu/sh4eb-r2d/linux-4.9.config
rename to board/qemu/sh4eb-r2d/linux-4.11.config

diff --git a/board/qemu/sparc-ss10/linux-4.9.config b/board/qemu/sparc-ss10/linux-4.11.config
similarity index 100%
rename from board/qemu/sparc-ss10/linux-4.9.config
rename to board/qemu/sparc-ss10/linux-4.11.config

diff --git a/board/qemu/sparc-ss10/readme.txt b/board/qemu/sparc-ss10/readme.txt
index 5a07ee000270c12456fc0007c002aec6595d5893..0ce461d2ea85275a955910f71280bfc9e0db4ce0 100644 (file)
--- a/board/qemu/sparc-ss10/readme.txt
+++ b/board/qemu/sparc-ss10/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/sparc64-sun4u/linux-4.9.config b/board/qemu/sparc64-sun4u/linux-4.11.config
similarity index 100%
rename from board/qemu/sparc64-sun4u/linux-4.9.config
rename to board/qemu/sparc64-sun4u/linux-4.11.config

diff --git a/board/qemu/sparc64-sun4u/readme.txt b/board/qemu/sparc64-sun4u/readme.txt
index aaf96c3572f060af6f380709215b3dcea2756a3b..adfff7089e455a5a79acb343bb249ca0cb66f78a 100644 (file)
--- a/board/qemu/sparc64-sun4u/readme.txt
+++ b/board/qemu/sparc64-sun4u/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/x86_64/linux-4.9.config b/board/qemu/x86/linux-4.11.config
similarity index 100%
rename from board/qemu/x86_64/linux-4.9.config
rename to board/qemu/x86/linux-4.11.config

diff --git a/board/qemu/x86/linux-4.9.config b/board/qemu/x86/linux-4.9.config
deleted file mode 120000 (symlink)
index 44b2fa1..0000000
--- a/board/qemu/x86/linux-4.9.config
+++ /dev/null
@@ -1 +0,0 @@
-../x86_64/linux-4.9.config
\ No newline at end of file

diff --git a/board/qemu/x86/readme.txt b/board/qemu/x86/readme.txt
index 4f2e4c7da3a4d669f2773d5eda6cd1084c18659c..17500961d393edbcb937ee91f95ca8f6d588cb80 100644 (file)
--- a/board/qemu/x86/readme.txt
+++ b/board/qemu/x86/readme.txt
@@ -6,4 +6,4 @@ Optionally add -smp N to emulate a SMP system with N CPUs.
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/x86_64/linux-4.11.config b/board/qemu/x86_64/linux-4.11.config
new file mode 100644 (file)
index 0000000..e3bd145
--- /dev/null
+++ b/board/qemu/x86_64/linux-4.11.config
@@ -0,0 +1,45 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_SMP=y
+CONFIG_HYPERVISOR_GUEST=y
+CONFIG_PARAVIRT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_DRM=y
+CONFIG_DRM_BOCHS=y
+CONFIG_DRM_QXL=y
+CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_GENERIC=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_INPUT=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/x86_64/readme.txt b/board/qemu/x86_64/readme.txt
index 6ea28d397f1df5f0721c7d585e07ea0868b82728..ecd7813a1ec36681882ec37dfbfe8c7298392d9a 100644 (file)
--- a/board/qemu/x86_64/readme.txt
+++ b/board/qemu/x86_64/readme.txt
@@ -6,4 +6,4 @@ Optionally add -smp N to emulate a SMP system with N CPUs.
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0

diff --git a/board/qemu/xtensa-lx60/linux-4.9-nommu.config b/board/qemu/xtensa-lx60/linux-4.11-nommu.config
similarity index 100%
rename from board/qemu/xtensa-lx60/linux-4.9-nommu.config
rename to board/qemu/xtensa-lx60/linux-4.11-nommu.config

diff --git a/board/qemu/xtensa-lx60/linux-4.9.config b/board/qemu/xtensa-lx60/linux-4.11.config
similarity index 100%
rename from board/qemu/xtensa-lx60/linux-4.9.config
rename to board/qemu/xtensa-lx60/linux-4.11.config

diff --git a/board/qemu/xtensa-lx60/linux/linux-0001-disable-redboot-and-uboot.patch b/board/qemu/xtensa-lx60/linux/linux-0001-disable-redboot-and-uboot.patch
deleted file mode 100644 (file)
index c0ccf48..0000000
--- a/board/qemu/xtensa-lx60/linux/linux-0001-disable-redboot-and-uboot.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-disable boot-uboot and boot-redboot, requires a patched u-boot and mkimage
-
-Signed-off-by:Waldemar Brodkorb <wbx@openadk.org>
-
-diff -Nur linux-3.15.orig/arch/xtensa/boot/Makefile linux-3.15/arch/xtensa/boot/Makefile
---- linux-3.15.orig/arch/xtensa/boot/Makefile  2014-06-08 20:19:54.000000000 +0200
-+++ linux-3.15/arch/xtensa/boot/Makefile       2014-06-14 20:07:15.206091165 +0200
-@@ -23,7 +23,7 @@
- 
- bootdir-$(CONFIG_XTENSA_PLATFORM_ISS)  += boot-elf
- bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf boot-uboot
--bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-redboot boot-elf boot-uboot
-+bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-elf
- 
- zImage Image: $(bootdir-y)
- 

diff --git a/board/qemu/xtensa-lx60/readme.txt b/board/qemu/xtensa-lx60/readme.txt
index be77345e44e0a183472f0faadaabfce0c8376a08..9a82c53752d504140ab37ea6878e43bc34a6fa19 100644 (file)
--- a/board/qemu/xtensa-lx60/readme.txt
+++ b/board/qemu/xtensa-lx60/readme.txt
@@ -4,5 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.6.0
-Known to fail with 2.5.0
+Tested with QEMU 2.9.0

diff --git a/configs/qemu_aarch64_virt_defconfig b/configs/qemu_aarch64_virt_defconfig
index 222c69eb7b8af56984fbea6ce6306221409c67e3..1ef4405ac4e16e33eb329fb2e488971c3012cf67 100644 (file)
--- a/configs/qemu_aarch64_virt_defconfig
+++ b/configs/qemu_aarch64_virt_defconfig
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.11.config"

diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig
index afeef75c9cac5cbecee74bae54652144d7df8c26..9845ec64640415cf0db2ab5c1e8c6caefc4abfeb 100644 (file)
--- a/configs/qemu_arm_versatile_defconfig
+++ b/configs/qemu_arm_versatile_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.11.config"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb"

diff --git a/configs/qemu_arm_versatile_nommu_defconfig b/configs/qemu_arm_versatile_nommu_defconfig
index 6cc646b2667a243093d595642aab33dac88449d1..9c48172e40cfd9480cb0cc065d12b283440f16d7 100644 (file)
--- a/configs/qemu_arm_versatile_nommu_defconfig
+++ b/configs/qemu_arm_versatile_nommu_defconfig
@@ -27,6 +27,6 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.45"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.70"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.4-nommu.config"

diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig
index f8dd5a09c62f0a33f3199575accdeb0cadc35ab2..faba6a6c25303114d2a254c9bd20071e35c311dd 100644 (file)
--- a/configs/qemu_arm_vexpress_defconfig
+++ b/configs/qemu_arm_vexpress_defconfig
@@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9"

diff --git a/configs/qemu_m68k_mcf5208_defconfig b/configs/qemu_m68k_mcf5208_defconfig
index a5ebf1539bd01b4cc8a8a5fda0838dc76b7c4b27..ccbdcfa3b70d2652bc30f9eb605775ceb98e42ee 100644 (file)
--- a/configs/qemu_m68k_mcf5208_defconfig
+++ b/configs/qemu_m68k_mcf5208_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_INITRAMFS=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_m68k_q800_defconfig b/configs/qemu_m68k_q800_defconfig
index 7bba7ef11bb74fa524d3d0fc49cee06a4ee4ab37..6dc50a7c0565cd006ea896061ee3c272c680cb02 100644 (file)
--- a/configs/qemu_m68k_q800_defconfig
+++ b/configs/qemu_m68k_q800_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig
index 3af8ad901526d2fa098f3dd73aa88491e8f4b489..ae736ff10113ae8f20fd3c0b54910339547a973c 100644 (file)
--- a/configs/qemu_microblazebe_mmu_defconfig
+++ b/configs/qemu_microblazebe_mmu_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.11.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch"

diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig
index 6bda8cc70fb7952d5eff33ad6465c675b993b4a7..3dedecf710d8468b9bb171c34d691aa05c494cc9 100644 (file)
--- a/configs/qemu_microblazeel_mmu_defconfig
+++ b/configs/qemu_microblazeel_mmu_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.11.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch"

diff --git a/configs/qemu_mips32r2_malta_defconfig b/configs/qemu_mips32r2_malta_defconfig
index efac1f2689d63e72b6ff3dca5271c5bce93cd56f..db408b0e72eeb761a3965bc23aa35a1351c436f0 100644 (file)
--- a/configs/qemu_mips32r2_malta_defconfig
+++ b/configs/qemu_mips32r2_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_mips32r2el_malta_defconfig b/configs/qemu_mips32r2el_malta_defconfig
index 066c89779f009712d6482c4b70db1c14e431717b..ccec419add8bb1ed5f6a2dc281067e8141a8c2e1 100644 (file)
--- a/configs/qemu_mips32r2el_malta_defconfig
+++ b/configs/qemu_mips32r2el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_mips32r6_malta_defconfig b/configs/qemu_mips32r6_malta_defconfig
index 898477b38cfd71d5d6642eaa7dbffe456b68366d..3aee84c53a30f9fc36f28f138a125ce0ecd8ca61 100644 (file)
--- a/configs/qemu_mips32r6_malta_defconfig
+++ b/configs/qemu_mips32r6_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

diff --git a/configs/qemu_mips32r6el_malta_defconfig b/configs/qemu_mips32r6el_malta_defconfig
index a082167c229e6cffe7b1a43204aa9e3326aaeac0..aa43dce945ec03192da646c876f7d65c59231e3e 100644 (file)
--- a/configs/qemu_mips32r6el_malta_defconfig
+++ b/configs/qemu_mips32r6el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig
index 7c4006331c911e7e9f4cabe9eeccd517b7149c20..52e42992a6c95418f22a2c7e11c03e184e6d4fde 100644 (file)
--- a/configs/qemu_mips64_malta_defconfig
+++ b/configs/qemu_mips64_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_mips64el_malta_defconfig b/configs/qemu_mips64el_malta_defconfig
index e95704569b20d53d2a1f85ac33304bdbad3ceec7..2b35c1a01637046ace3d49c033b7475397a21b26 100644 (file)
--- a/configs/qemu_mips64el_malta_defconfig
+++ b/configs/qemu_mips64el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_mips64r6_malta_defconfig b/configs/qemu_mips64r6_malta_defconfig
index dccdc169fabcc2c190d48a08d4dae35742262c98..06c0133f9f4a7a3ac71b4cf90a5c80a52ae45a42 100644 (file)
--- a/configs/qemu_mips64r6_malta_defconfig
+++ b/configs/qemu_mips64r6_malta_defconfig
@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

diff --git a/configs/qemu_mips64r6el_malta_defconfig b/configs/qemu_mips64r6el_malta_defconfig
index 8bbc114ae6d7d824b694872c4e5f4682a1b36467..e80e7284866f5bd119d7e91bb808c098c56ce2cf 100644 (file)
--- a/configs/qemu_mips64r6el_malta_defconfig
+++ b/configs/qemu_mips64r6el_malta_defconfig
@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

diff --git a/configs/qemu_nios2_10m50_defconfig b/configs/qemu_nios2_10m50_defconfig
index 345a6e548827dafee6ba2fb60204e31364e45de6..a9eaf0800a3e3ad7f6c7f903dc85266ce4a62830 100644 (file)
--- a/configs/qemu_nios2_10m50_defconfig
+++ b/configs/qemu_nios2_10m50_defconfig
@@ -1,10 +1,10 @@
 BR2_nios2=y
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_DEFCONFIG="10m50"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/nios2-10m50/linux-4.9.fragment"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/nios2-10m50/linux-4.11.fragment"
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y

diff --git a/configs/qemu_or1k_defconfig b/configs/qemu_or1k_defconfig
index 4f70285d41699f9781e086d57c04e80b69eb9098..0eb1916a41f804852707479ab54748912c1e4d51 100644 (file)
--- a/configs/qemu_or1k_defconfig
+++ b/configs/qemu_or1k_defconfig
@@ -1,19 +1,16 @@
 # Architecture
 BR2_or1k=y
 
-# Patches
-BR2_GLOBAL_PATCH_DIR="board/qemu/or1k/patches"
-
 # Filesystem
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4,9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4,11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux-4.11.config"

diff --git a/configs/qemu_ppc64_pseries_defconfig b/configs/qemu_ppc64_pseries_defconfig
index c15de3bc487bf204350995582e16d5cbbd829329..7af20e989d0c35c9b8454c342daf6a3030409191 100644 (file)
--- a/configs/qemu_ppc64_pseries_defconfig
+++ b/configs/qemu_ppc64_pseries_defconfig
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_DEFCONFIG="pseries"
 BR2_LINUX_KERNEL_VMLINUX=y

diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig
index 58d4dfc817cc36a4f457c0ccb5cc3a0d9f892ab7..9482aaa87466b5e1268d2d4607c24587f4ee216d 100644 (file)
--- a/configs/qemu_ppc_g3beige_defconfig
+++ b/configs/qemu_ppc_g3beige_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig
index 0252da728d6aaa00ddcb162b85f9433050ee76ae..d2d92b6652575d672c81ddd41cadcf4b2dc65cf7 100644 (file)
--- a/configs/qemu_ppc_mpc8544ds_defconfig
+++ b/configs/qemu_ppc_mpc8544ds_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.11.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_sparc64_sun4u_defconfig b/configs/qemu_sparc64_sun4u_defconfig
index ef2d22f7962b5a6e653bf444e89b8f362a1e1dec..1f4df0614a252881197f24df5a4f7ecd8be981f5 100644 (file)
--- a/configs/qemu_sparc64_sun4u_defconfig
+++ b/configs/qemu_sparc64_sun4u_defconfig
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.11.config"

diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig
index 1d6c951737d617b635d5f704cfa7d18de1e6be45..b492f8882ef1b26b869c85d56603289e1d7f2d47 100644 (file)
--- a/configs/qemu_sparc_ss10_defconfig
+++ b/configs/qemu_sparc_ss10_defconfig
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.11.config"

diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig
index 7002d5edfe07af0aec493b8b800c67071828100c..aa17ace5b0fe453ec80e778301de1b83b828827d 100644 (file)
--- a/configs/qemu_x86_64_defconfig
+++ b/configs/qemu_x86_64_defconfig
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.11.config"

diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig
index 99ca6040068b249921393fc1c3f71f90b11f9dea..c023a8ee197ad20cc10f3d7a86e8d0138b430e27 100644 (file)
--- a/configs/qemu_x86_defconfig
+++ b/configs/qemu_x86_defconfig
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.11.config"

diff --git a/configs/qemu_xtensa_lx60_defconfig b/configs/qemu_xtensa_lx60_defconfig
index 915b6ff14887154b1c36fc0e4757cec1bf56e840..3e98222b65554c3853b986d72b2e8fe6e735abd4 100644 (file)
--- a/configs/qemu_xtensa_lx60_defconfig
+++ b/configs/qemu_xtensa_lx60_defconfig
@@ -5,9 +5,6 @@ BR2_XTENSA_CUSTOM_NAME="dc233c"
 BR2_XTENSA_CORE_NAME="lx60"
 BR2_XTENSA_OVERLAY_DIR="board/qemu/xtensa-lx60"
 
-# Patches
-BR2_GLOBAL_PATCH_DIR="board/qemu/xtensa-lx60"
-
 # System
 BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
@@ -16,15 +13,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.16"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.11.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
 BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
-BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"

diff --git a/configs/qemu_xtensa_lx60_nommu_defconfig b/configs/qemu_xtensa_lx60_nommu_defconfig
index 8c66c3ac0c00ae1c06214d1aefdb6a9e6d90cadb..998cd2aa6bf3e447ffa84cb93492b8ed68ab22a1 100644 (file)
--- a/configs/qemu_xtensa_lx60_nommu_defconfig
+++ b/configs/qemu_xtensa_lx60_nommu_defconfig
@@ -9,9 +9,6 @@ BR2_XTENSA_OVERLAY_DIR="board/qemu/xtensa-lx60"
 BR2_PACKAGE_HOST_ELF2FLT=y
 # BR2_USE_MMU is not set
 
-# Patches
-BR2_GLOBAL_PATCH_DIR="board/qemu/xtensa-lx60"
-
 # System
 BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
@@ -20,15 +17,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.16"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.9-nommu.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.11-nommu.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
 BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
-BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"