]> rtime.felk.cvut.cz Git - can-eth-gw-linux.git/blob - sound/soc/samsung/smartq_wm8987.c
mm/bootmem.c: remove unused wrapper function reserve_bootmem_generic()
[can-eth-gw-linux.git] / sound / soc / samsung / smartq_wm8987.c
1 /* sound/soc/samsung/smartq_wm8987.c
2  *
3  * Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com>
4  *
5  * Based on smdk6410_wm8987.c
6  *     Copyright 2007 Wolfson Microelectronics PLC. - linux@wolfsonmicro.com
7  *     Graeme Gregory - graeme.gregory@wolfsonmicro.com
8  *
9  *  This program is free software; you can redistribute  it and/or modify it
10  *  under  the terms of  the GNU General  Public License as published by the
11  *  Free Software Foundation;  either version 2 of the  License, or (at your
12  *  option) any later version.
13  *
14  */
15
16 #include <linux/gpio.h>
17 #include <linux/module.h>
18
19 #include <sound/soc.h>
20 #include <sound/jack.h>
21
22 #include <asm/mach-types.h>
23
24 #include "i2s.h"
25 #include "../codecs/wm8750.h"
26
27 /*
28  * WM8987 is register compatible with WM8750, so using that as base driver.
29  */
30
31 static struct snd_soc_card snd_soc_smartq;
32
33 static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
34         struct snd_pcm_hw_params *params)
35 {
36         struct snd_soc_pcm_runtime *rtd = substream->private_data;
37         struct snd_soc_dai *codec_dai = rtd->codec_dai;
38         struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
39         unsigned int clk = 0;
40         int ret;
41
42         switch (params_rate(params)) {
43         case 8000:
44         case 16000:
45         case 32000:
46         case 48000:
47         case 96000:
48                 clk = 12288000;
49                 break;
50         case 11025:
51         case 22050:
52         case 44100:
53         case 88200:
54                 clk = 11289600;
55                 break;
56         }
57
58         /* set codec DAI configuration */
59         ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
60                                              SND_SOC_DAIFMT_NB_NF |
61                                              SND_SOC_DAIFMT_CBS_CFS);
62         if (ret < 0)
63                 return ret;
64
65         /* set cpu DAI configuration */
66         ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
67                                            SND_SOC_DAIFMT_NB_NF |
68                                            SND_SOC_DAIFMT_CBS_CFS);
69         if (ret < 0)
70                 return ret;
71
72         /* Use PCLK for I2S signal generation */
73         ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0,
74                                         0, SND_SOC_CLOCK_IN);
75         if (ret < 0)
76                 return ret;
77
78         /* Gate the RCLK output on PAD */
79         ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK,
80                                         0, SND_SOC_CLOCK_IN);
81         if (ret < 0)
82                 return ret;
83
84         /* set the codec system clock for DAC and ADC */
85         ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
86                                      SND_SOC_CLOCK_IN);
87         if (ret < 0)
88                 return ret;
89
90         return 0;
91 }
92
93 /*
94  * SmartQ WM8987 HiFi DAI operations.
95  */
96 static struct snd_soc_ops smartq_hifi_ops = {
97         .hw_params = smartq_hifi_hw_params,
98 };
99
100 static struct snd_soc_jack smartq_jack;
101
102 static struct snd_soc_jack_pin smartq_jack_pins[] = {
103         /* Disable speaker when headphone is plugged in */
104         {
105                 .pin    = "Internal Speaker",
106                 .mask   = SND_JACK_HEADPHONE,
107         },
108 };
109
110 static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
111         {
112                 .gpio           = S3C64XX_GPL(12),
113                 .name           = "headphone detect",
114                 .report         = SND_JACK_HEADPHONE,
115                 .debounce_time  = 200,
116         },
117 };
118
119 static const struct snd_kcontrol_new wm8987_smartq_controls[] = {
120         SOC_DAPM_PIN_SWITCH("Internal Speaker"),
121         SOC_DAPM_PIN_SWITCH("Headphone Jack"),
122         SOC_DAPM_PIN_SWITCH("Internal Mic"),
123 };
124
125 static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
126                                 struct snd_kcontrol *k,
127                                 int event)
128 {
129         gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
130
131         return 0;
132 }
133
134 static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = {
135         SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event),
136         SND_SOC_DAPM_HP("Headphone Jack", NULL),
137         SND_SOC_DAPM_MIC("Internal Mic", NULL),
138 };
139
140 static const struct snd_soc_dapm_route audio_map[] = {
141         {"Headphone Jack", NULL, "LOUT2"},
142         {"Headphone Jack", NULL, "ROUT2"},
143
144         {"Internal Speaker", NULL, "LOUT2"},
145         {"Internal Speaker", NULL, "ROUT2"},
146
147         {"Mic Bias", NULL, "Internal Mic"},
148         {"LINPUT2", NULL, "Mic Bias"},
149 };
150
151 static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd)
152 {
153         struct snd_soc_codec *codec = rtd->codec;
154         struct snd_soc_dapm_context *dapm = &codec->dapm;
155         int err = 0;
156
157         /* set endpoints to not connected */
158         snd_soc_dapm_nc_pin(dapm, "LINPUT1");
159         snd_soc_dapm_nc_pin(dapm, "RINPUT1");
160         snd_soc_dapm_nc_pin(dapm, "OUT3");
161         snd_soc_dapm_nc_pin(dapm, "ROUT1");
162
163         /* set endpoints to default off mode */
164         snd_soc_dapm_enable_pin(dapm, "Internal Speaker");
165         snd_soc_dapm_enable_pin(dapm, "Internal Mic");
166         snd_soc_dapm_disable_pin(dapm, "Headphone Jack");
167
168         /* Headphone jack detection */
169         err = snd_soc_jack_new(codec, "Headphone Jack",
170                                SND_JACK_HEADPHONE, &smartq_jack);
171         if (err)
172                 return err;
173
174         err = snd_soc_jack_add_pins(&smartq_jack, ARRAY_SIZE(smartq_jack_pins),
175                                     smartq_jack_pins);
176         if (err)
177                 return err;
178
179         err = snd_soc_jack_add_gpios(&smartq_jack,
180                                      ARRAY_SIZE(smartq_jack_gpios),
181                                      smartq_jack_gpios);
182
183         return err;
184 }
185
186 static struct snd_soc_dai_link smartq_dai[] = {
187         {
188                 .name           = "wm8987",
189                 .stream_name    = "SmartQ Hi-Fi",
190                 .cpu_dai_name   = "samsung-i2s.0",
191                 .codec_dai_name = "wm8750-hifi",
192                 .platform_name  = "samsung-audio",
193                 .codec_name     = "wm8750.0-0x1a",
194                 .init           = smartq_wm8987_init,
195                 .ops            = &smartq_hifi_ops,
196         },
197 };
198
199 static struct snd_soc_card snd_soc_smartq = {
200         .name = "SmartQ",
201         .owner = THIS_MODULE,
202         .dai_link = smartq_dai,
203         .num_links = ARRAY_SIZE(smartq_dai),
204
205         .dapm_widgets = wm8987_dapm_widgets,
206         .num_dapm_widgets = ARRAY_SIZE(wm8987_dapm_widgets),
207         .dapm_routes = audio_map,
208         .num_dapm_routes = ARRAY_SIZE(audio_map),
209         .controls = wm8987_smartq_controls,
210         .num_controls = ARRAY_SIZE(wm8987_smartq_controls),
211 };
212
213 static struct platform_device *smartq_snd_device;
214
215 static int __init smartq_init(void)
216 {
217         int ret;
218
219         if (!machine_is_smartq7() && !machine_is_smartq5()) {
220                 pr_info("Only SmartQ is supported by this ASoC driver\n");
221                 return -ENODEV;
222         }
223
224         smartq_snd_device = platform_device_alloc("soc-audio", -1);
225         if (!smartq_snd_device)
226                 return -ENOMEM;
227
228         platform_set_drvdata(smartq_snd_device, &snd_soc_smartq);
229
230         ret = platform_device_add(smartq_snd_device);
231         if (ret) {
232                 platform_device_put(smartq_snd_device);
233                 return ret;
234         }
235
236         /* Initialise GPIOs used by amplifiers */
237         ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
238         if (ret) {
239                 dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
240                 goto err_unregister_device;
241         }
242
243         /* Disable amplifiers */
244         ret = gpio_direction_output(S3C64XX_GPK(12), 1);
245         if (ret) {
246                 dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
247                 goto err_free_gpio_amp_shut;
248         }
249
250         return 0;
251
252 err_free_gpio_amp_shut:
253         gpio_free(S3C64XX_GPK(12));
254 err_unregister_device:
255         platform_device_unregister(smartq_snd_device);
256
257         return ret;
258 }
259
260 static void __exit smartq_exit(void)
261 {
262         gpio_free(S3C64XX_GPK(12));
263         snd_soc_jack_free_gpios(&smartq_jack, ARRAY_SIZE(smartq_jack_gpios),
264                                 smartq_jack_gpios);
265
266         platform_device_unregister(smartq_snd_device);
267 }
268
269 module_init(smartq_init);
270 module_exit(smartq_exit);
271
272 /* Module information */
273 MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>");
274 MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987");
275 MODULE_LICENSE("GPL");