1 /******************************************************************************
5 * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
29 #include <linux/etherdevice.h>
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/init.h>
33 #include <linux/sched.h>
34 #include <net/mac80211.h>
37 #include "iwl-agn-hw.h"
38 #include "iwl-trans.h"
39 #include "iwl-modparams.h"
44 int iwlagn_hw_valid_rtc_data_addr(u32 addr)
46 return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) &&
47 (addr < IWLAGN_RTC_DATA_UPPER_BOUND);
50 int iwlagn_send_tx_power(struct iwl_priv *priv)
52 struct iwlagn_tx_power_dbm_cmd tx_power_cmd;
55 if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
56 "TX Power requested while scanning!\n"))
59 /* half dBm need to multiply */
60 tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
62 if (tx_power_cmd.global_lmt > priv->eeprom_data->max_tx_pwr_half_dbm) {
64 * For the newer devices which using enhanced/extend tx power
65 * table in EEPROM, the format is in half dBm. driver need to
66 * convert to dBm format before report to mac80211.
67 * By doing so, there is a possibility of 1/2 dBm resolution
68 * lost. driver will perform "round-up" operation before
69 * reporting, but it will cause 1/2 dBm tx power over the
70 * regulatory limit. Perform the checking here, if the
71 * "tx_power_user_lmt" is higher than EEPROM value (in
72 * half-dBm format), lower the tx power based on EEPROM
74 tx_power_cmd.global_lmt =
75 priv->eeprom_data->max_tx_pwr_half_dbm;
77 tx_power_cmd.flags = IWLAGN_TX_POWER_NO_CLOSED;
78 tx_power_cmd.srv_chan_lmt = IWLAGN_TX_POWER_AUTO;
80 if (IWL_UCODE_API(priv->fw->ucode_ver) == 1)
81 tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1;
83 tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD;
85 return iwl_dvm_send_cmd_pdu(priv, tx_ant_cfg_cmd, CMD_SYNC,
86 sizeof(tx_power_cmd), &tx_power_cmd);
89 void iwlagn_temperature(struct iwl_priv *priv)
91 lockdep_assert_held(&priv->statistics.lock);
93 /* store temperature from correct statistics (in Celsius) */
94 priv->temperature = le32_to_cpu(priv->statistics.common.temperature);
98 int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
103 /* HT rate format: mac80211 wants an MCS number, which is just LSB */
104 if (rate_n_flags & RATE_MCS_HT_MSK) {
105 idx = (rate_n_flags & 0xff);
107 /* Legacy rate format, search for match in table */
109 if (band == IEEE80211_BAND_5GHZ)
110 band_offset = IWL_FIRST_OFDM_RATE;
111 for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++)
112 if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
113 return idx - band_offset;
119 int iwlagn_manage_ibss_station(struct iwl_priv *priv,
120 struct ieee80211_vif *vif, bool add)
122 struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
125 return iwlagn_add_bssid_station(priv, vif_priv->ctx,
127 &vif_priv->ibss_bssid_sta_id);
128 return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id,
129 vif->bss_conf.bssid);
133 * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode
136 * 1. acquire mutex before calling
137 * 2. make sure rf is on and not in exit state
139 int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control)
141 struct iwl_txfifo_flush_cmd flush_cmd;
142 struct iwl_host_cmd cmd = {
143 .id = REPLY_TXFIFO_FLUSH,
144 .len = { sizeof(struct iwl_txfifo_flush_cmd), },
146 .data = { &flush_cmd, },
151 memset(&flush_cmd, 0, sizeof(flush_cmd));
152 if (flush_control & BIT(IWL_RXON_CTX_BSS))
153 flush_cmd.fifo_control = IWL_SCD_VO_MSK | IWL_SCD_VI_MSK |
154 IWL_SCD_BE_MSK | IWL_SCD_BK_MSK |
156 if ((flush_control & BIT(IWL_RXON_CTX_PAN)) &&
157 (priv->valid_contexts != BIT(IWL_RXON_CTX_BSS)))
158 flush_cmd.fifo_control |= IWL_PAN_SCD_VO_MSK |
159 IWL_PAN_SCD_VI_MSK | IWL_PAN_SCD_BE_MSK |
160 IWL_PAN_SCD_BK_MSK | IWL_PAN_SCD_MGMT_MSK |
161 IWL_PAN_SCD_MULTICAST_MSK;
163 if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE)
164 flush_cmd.fifo_control |= IWL_AGG_TX_QUEUE_MSK;
166 IWL_DEBUG_INFO(priv, "fifo queue control: 0X%x\n",
167 flush_cmd.fifo_control);
168 flush_cmd.flush_control = cpu_to_le16(flush_control);
170 return iwl_dvm_send_cmd(priv, &cmd);
173 void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control)
175 mutex_lock(&priv->mutex);
176 ieee80211_stop_queues(priv->hw);
177 if (iwlagn_txfifo_flush(priv, IWL_DROP_ALL)) {
178 IWL_ERR(priv, "flush request fail\n");
181 IWL_DEBUG_INFO(priv, "wait transmit/flush all frames\n");
182 iwl_trans_wait_tx_queue_empty(priv->trans);
184 ieee80211_wake_queues(priv->hw);
185 mutex_unlock(&priv->mutex);
192 static const __le32 iwlagn_def_3w_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
193 cpu_to_le32(0xaaaaaaaa),
194 cpu_to_le32(0xaaaaaaaa),
195 cpu_to_le32(0xaeaaaaaa),
196 cpu_to_le32(0xaaaaaaaa),
197 cpu_to_le32(0xcc00ff28),
198 cpu_to_le32(0x0000aaaa),
199 cpu_to_le32(0xcc00aaaa),
200 cpu_to_le32(0x0000aaaa),
201 cpu_to_le32(0xc0004000),
202 cpu_to_le32(0x00004000),
203 cpu_to_le32(0xf0005000),
204 cpu_to_le32(0xf0005000),
209 static const __le32 iwlagn_loose_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
210 cpu_to_le32(0xaaaaaaaa),
211 cpu_to_le32(0xaaaaaaaa),
212 cpu_to_le32(0xaeaaaaaa),
213 cpu_to_le32(0xaaaaaaaa),
214 cpu_to_le32(0xcc00ff28),
215 cpu_to_le32(0x0000aaaa),
216 cpu_to_le32(0xcc00aaaa),
217 cpu_to_le32(0x0000aaaa),
218 cpu_to_le32(0x00000000),
219 cpu_to_le32(0x00000000),
220 cpu_to_le32(0xf0005000),
221 cpu_to_le32(0xf0005000),
224 /* Full concurrency */
225 static const __le32 iwlagn_concurrent_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
226 cpu_to_le32(0xaaaaaaaa),
227 cpu_to_le32(0xaaaaaaaa),
228 cpu_to_le32(0xaaaaaaaa),
229 cpu_to_le32(0xaaaaaaaa),
230 cpu_to_le32(0xaaaaaaaa),
231 cpu_to_le32(0xaaaaaaaa),
232 cpu_to_le32(0xaaaaaaaa),
233 cpu_to_le32(0xaaaaaaaa),
234 cpu_to_le32(0x00000000),
235 cpu_to_le32(0x00000000),
236 cpu_to_le32(0x00000000),
237 cpu_to_le32(0x00000000),
240 void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
242 struct iwl_basic_bt_cmd basic = {
243 .max_kill = IWLAGN_BT_MAX_KILL_DEFAULT,
244 .bt3_timer_t7_value = IWLAGN_BT3_T7_DEFAULT,
245 .bt3_prio_sample_time = IWLAGN_BT3_PRIO_SAMPLE_DEFAULT,
246 .bt3_timer_t2_value = IWLAGN_BT3_T2_DEFAULT,
248 struct iwl_bt_cmd_v1 bt_cmd_v1;
249 struct iwl_bt_cmd_v2 bt_cmd_v2;
252 BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) !=
253 sizeof(basic.bt3_lookup_table));
255 if (priv->cfg->bt_params) {
257 * newer generation of devices (2000 series and newer)
258 * use the version 2 of the bt command
259 * we need to make sure sending the host command
260 * with correct data structure to avoid uCode assert
262 if (priv->cfg->bt_params->bt_session_2) {
263 bt_cmd_v2.prio_boost = cpu_to_le32(
264 priv->cfg->bt_params->bt_prio_boost);
265 bt_cmd_v2.tx_prio_boost = 0;
266 bt_cmd_v2.rx_prio_boost = 0;
268 /* older version only has 8 bits */
269 WARN_ON(priv->cfg->bt_params->bt_prio_boost & ~0xFF);
270 bt_cmd_v1.prio_boost =
271 priv->cfg->bt_params->bt_prio_boost;
272 bt_cmd_v1.tx_prio_boost = 0;
273 bt_cmd_v1.rx_prio_boost = 0;
276 IWL_ERR(priv, "failed to construct BT Coex Config\n");
281 * Possible situations when BT needs to take over for receive,
282 * at the same time where STA needs to response to AP's frame(s),
283 * reduce the tx power of the required response frames, by that,
284 * allow the concurrent BT receive & WiFi transmit
285 * (BT - ANT A, WiFi -ANT B), without interference to one another
287 * Reduced tx power apply to control frames only (ACK/Back/CTS)
288 * when indicated by the BT config command
290 basic.kill_ack_mask = priv->kill_ack_mask;
291 basic.kill_cts_mask = priv->kill_cts_mask;
292 if (priv->reduced_txpower)
293 basic.reduce_txpower = IWLAGN_BT_REDUCED_TX_PWR;
294 basic.valid = priv->bt_valid;
297 * Configure BT coex mode to "no coexistence" when the
298 * user disabled BT coexistence, we have no interface
299 * (might be in monitor mode), or the interface is in
300 * IBSS mode (no proper uCode support for coex then).
302 if (!iwlwifi_mod_params.bt_coex_active ||
303 priv->iw_mode == NL80211_IFTYPE_ADHOC) {
304 basic.flags = IWLAGN_BT_FLAG_COEX_MODE_DISABLED;
306 basic.flags = IWLAGN_BT_FLAG_COEX_MODE_3W <<
307 IWLAGN_BT_FLAG_COEX_MODE_SHIFT;
309 if (!priv->bt_enable_pspoll)
310 basic.flags |= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE;
312 basic.flags &= ~IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE;
314 if (priv->bt_ch_announce)
315 basic.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION;
316 IWL_DEBUG_COEX(priv, "BT coex flag: 0X%x\n", basic.flags);
318 priv->bt_enable_flag = basic.flags;
319 if (priv->bt_full_concurrent)
320 memcpy(basic.bt3_lookup_table, iwlagn_concurrent_lookup,
321 sizeof(iwlagn_concurrent_lookup));
323 memcpy(basic.bt3_lookup_table, iwlagn_def_3w_lookup,
324 sizeof(iwlagn_def_3w_lookup));
326 IWL_DEBUG_COEX(priv, "BT coex %s in %s mode\n",
327 basic.flags ? "active" : "disabled",
328 priv->bt_full_concurrent ?
329 "full concurrency" : "3-wire");
331 if (priv->cfg->bt_params->bt_session_2) {
332 memcpy(&bt_cmd_v2.basic, &basic,
334 ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG,
335 CMD_SYNC, sizeof(bt_cmd_v2), &bt_cmd_v2);
337 memcpy(&bt_cmd_v1.basic, &basic,
339 ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG,
340 CMD_SYNC, sizeof(bt_cmd_v1), &bt_cmd_v1);
343 IWL_ERR(priv, "failed to send BT Coex Config\n");
347 void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv *priv, bool rssi_ena)
349 struct iwl_rxon_context *ctx, *found_ctx = NULL;
350 bool found_ap = false;
352 lockdep_assert_held(&priv->mutex);
354 /* Check whether AP or GO mode is active. */
356 for_each_context(priv, ctx) {
357 if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_AP &&
358 iwl_is_associated_ctx(ctx)) {
366 * If disable was received or If GO/AP mode, disable RSSI
369 if (!rssi_ena || found_ap) {
370 if (priv->cur_rssi_ctx) {
371 ctx = priv->cur_rssi_ctx;
372 ieee80211_disable_rssi_reports(ctx->vif);
373 priv->cur_rssi_ctx = NULL;
379 * If rssi measurements need to be enabled, consider all cases now.
380 * Figure out how many contexts are active.
382 for_each_context(priv, ctx) {
383 if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION &&
384 iwl_is_associated_ctx(ctx)) {
391 * rssi monitor already enabled for the correct interface...nothing
394 if (found_ctx == priv->cur_rssi_ctx)
398 * Figure out if rssi monitor is currently enabled, and needs
399 * to be changed. If rssi monitor is already enabled, disable
400 * it first else just enable rssi measurements on the
401 * interface found above.
403 if (priv->cur_rssi_ctx) {
404 ctx = priv->cur_rssi_ctx;
406 ieee80211_disable_rssi_reports(ctx->vif);
409 priv->cur_rssi_ctx = found_ctx;
414 ieee80211_enable_rssi_reports(found_ctx->vif,
415 IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD,
416 IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD);
419 static bool iwlagn_bt_traffic_is_sco(struct iwl_bt_uart_msg *uart_msg)
421 return BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3 >>
422 BT_UART_MSG_FRAME3SCOESCO_POS;
425 static void iwlagn_bt_traffic_change_work(struct work_struct *work)
427 struct iwl_priv *priv =
428 container_of(work, struct iwl_priv, bt_traffic_change_work);
429 struct iwl_rxon_context *ctx;
430 int smps_request = -1;
432 if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) {
433 /* bt coex disabled */
438 * Note: bt_traffic_load can be overridden by scan complete and
439 * coex profile notifications. Ignore that since only bad consequence
440 * can be not matching debug print with actual state.
442 IWL_DEBUG_COEX(priv, "BT traffic load changes: %d\n",
443 priv->bt_traffic_load);
445 switch (priv->bt_traffic_load) {
446 case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
448 smps_request = IEEE80211_SMPS_DYNAMIC;
450 smps_request = IEEE80211_SMPS_AUTOMATIC;
452 case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
453 smps_request = IEEE80211_SMPS_DYNAMIC;
455 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
456 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
457 smps_request = IEEE80211_SMPS_STATIC;
460 IWL_ERR(priv, "Invalid BT traffic load: %d\n",
461 priv->bt_traffic_load);
465 mutex_lock(&priv->mutex);
468 * We can not send command to firmware while scanning. When the scan
469 * complete we will schedule this work again. We do check with mutex
470 * locked to prevent new scan request to arrive. We do not check
471 * STATUS_SCANNING to avoid race when queue_work two times from
472 * different notifications, but quit and not perform any work at all.
474 if (test_bit(STATUS_SCAN_HW, &priv->status))
477 iwl_update_chain_flags(priv);
479 if (smps_request != -1) {
480 priv->current_ht_config.smps = smps_request;
481 for_each_context(priv, ctx) {
482 if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION)
483 ieee80211_request_smps(ctx->vif, smps_request);
488 * Dynamic PS poll related functionality. Adjust RSSI measurements if
491 iwlagn_bt_coex_rssi_monitor(priv);
493 mutex_unlock(&priv->mutex);
497 * If BT sco traffic, and RSSI monitor is enabled, move measurements to the
498 * correct interface or disable it if this is the last interface to be
501 void iwlagn_bt_coex_rssi_monitor(struct iwl_priv *priv)
503 if (priv->bt_is_sco &&
504 priv->bt_traffic_load == IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS)
505 iwlagn_bt_adjust_rssi_monitor(priv, true);
507 iwlagn_bt_adjust_rssi_monitor(priv, false);
510 static void iwlagn_print_uartmsg(struct iwl_priv *priv,
511 struct iwl_bt_uart_msg *uart_msg)
513 IWL_DEBUG_COEX(priv, "Message Type = 0x%X, SSN = 0x%X, "
514 "Update Req = 0x%X\n",
515 (BT_UART_MSG_FRAME1MSGTYPE_MSK & uart_msg->frame1) >>
516 BT_UART_MSG_FRAME1MSGTYPE_POS,
517 (BT_UART_MSG_FRAME1SSN_MSK & uart_msg->frame1) >>
518 BT_UART_MSG_FRAME1SSN_POS,
519 (BT_UART_MSG_FRAME1UPDATEREQ_MSK & uart_msg->frame1) >>
520 BT_UART_MSG_FRAME1UPDATEREQ_POS);
522 IWL_DEBUG_COEX(priv, "Open connections = 0x%X, Traffic load = 0x%X, "
523 "Chl_SeqN = 0x%X, In band = 0x%X\n",
524 (BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK & uart_msg->frame2) >>
525 BT_UART_MSG_FRAME2OPENCONNECTIONS_POS,
526 (BT_UART_MSG_FRAME2TRAFFICLOAD_MSK & uart_msg->frame2) >>
527 BT_UART_MSG_FRAME2TRAFFICLOAD_POS,
528 (BT_UART_MSG_FRAME2CHLSEQN_MSK & uart_msg->frame2) >>
529 BT_UART_MSG_FRAME2CHLSEQN_POS,
530 (BT_UART_MSG_FRAME2INBAND_MSK & uart_msg->frame2) >>
531 BT_UART_MSG_FRAME2INBAND_POS);
533 IWL_DEBUG_COEX(priv, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, "
534 "ACL = 0x%X, Master = 0x%X, OBEX = 0x%X\n",
535 (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >>
536 BT_UART_MSG_FRAME3SCOESCO_POS,
537 (BT_UART_MSG_FRAME3SNIFF_MSK & uart_msg->frame3) >>
538 BT_UART_MSG_FRAME3SNIFF_POS,
539 (BT_UART_MSG_FRAME3A2DP_MSK & uart_msg->frame3) >>
540 BT_UART_MSG_FRAME3A2DP_POS,
541 (BT_UART_MSG_FRAME3ACL_MSK & uart_msg->frame3) >>
542 BT_UART_MSG_FRAME3ACL_POS,
543 (BT_UART_MSG_FRAME3MASTER_MSK & uart_msg->frame3) >>
544 BT_UART_MSG_FRAME3MASTER_POS,
545 (BT_UART_MSG_FRAME3OBEX_MSK & uart_msg->frame3) >>
546 BT_UART_MSG_FRAME3OBEX_POS);
548 IWL_DEBUG_COEX(priv, "Idle duration = 0x%X\n",
549 (BT_UART_MSG_FRAME4IDLEDURATION_MSK & uart_msg->frame4) >>
550 BT_UART_MSG_FRAME4IDLEDURATION_POS);
552 IWL_DEBUG_COEX(priv, "Tx Activity = 0x%X, Rx Activity = 0x%X, "
553 "eSCO Retransmissions = 0x%X\n",
554 (BT_UART_MSG_FRAME5TXACTIVITY_MSK & uart_msg->frame5) >>
555 BT_UART_MSG_FRAME5TXACTIVITY_POS,
556 (BT_UART_MSG_FRAME5RXACTIVITY_MSK & uart_msg->frame5) >>
557 BT_UART_MSG_FRAME5RXACTIVITY_POS,
558 (BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK & uart_msg->frame5) >>
559 BT_UART_MSG_FRAME5ESCORETRANSMIT_POS);
561 IWL_DEBUG_COEX(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X\n",
562 (BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK & uart_msg->frame6) >>
563 BT_UART_MSG_FRAME6SNIFFINTERVAL_POS,
564 (BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >>
565 BT_UART_MSG_FRAME6DISCOVERABLE_POS);
567 IWL_DEBUG_COEX(priv, "Sniff Activity = 0x%X, Page = "
568 "0x%X, Inquiry = 0x%X, Connectable = 0x%X\n",
569 (BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >>
570 BT_UART_MSG_FRAME7SNIFFACTIVITY_POS,
571 (BT_UART_MSG_FRAME7PAGE_MSK & uart_msg->frame7) >>
572 BT_UART_MSG_FRAME7PAGE_POS,
573 (BT_UART_MSG_FRAME7INQUIRY_MSK & uart_msg->frame7) >>
574 BT_UART_MSG_FRAME7INQUIRY_POS,
575 (BT_UART_MSG_FRAME7CONNECTABLE_MSK & uart_msg->frame7) >>
576 BT_UART_MSG_FRAME7CONNECTABLE_POS);
579 static bool iwlagn_set_kill_msk(struct iwl_priv *priv,
580 struct iwl_bt_uart_msg *uart_msg)
582 bool need_update = false;
583 u8 kill_msk = IWL_BT_KILL_REDUCE;
584 static const __le32 bt_kill_ack_msg[3] = {
585 IWLAGN_BT_KILL_ACK_MASK_DEFAULT,
586 IWLAGN_BT_KILL_ACK_CTS_MASK_SCO,
587 IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE};
588 static const __le32 bt_kill_cts_msg[3] = {
589 IWLAGN_BT_KILL_CTS_MASK_DEFAULT,
590 IWLAGN_BT_KILL_ACK_CTS_MASK_SCO,
591 IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE};
593 if (!priv->reduced_txpower)
594 kill_msk = (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3)
595 ? IWL_BT_KILL_OVERRIDE : IWL_BT_KILL_DEFAULT;
596 if (priv->kill_ack_mask != bt_kill_ack_msg[kill_msk] ||
597 priv->kill_cts_mask != bt_kill_cts_msg[kill_msk]) {
598 priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK;
599 priv->kill_ack_mask = bt_kill_ack_msg[kill_msk];
600 priv->bt_valid |= IWLAGN_BT_VALID_KILL_CTS_MASK;
601 priv->kill_cts_mask = bt_kill_cts_msg[kill_msk];
608 * Upon RSSI changes, sends a bt config command with following changes
609 * 1. enable/disable "reduced control frames tx power
610 * 2. update the "kill)ack_mask" and "kill_cts_mask"
612 * If "reduced tx power" is enabled, uCode shall
613 * 1. ACK/Back/CTS rate shall reduced to 6Mbps
614 * 2. not use duplciate 20/40MHz mode
616 static bool iwlagn_fill_txpower_mode(struct iwl_priv *priv,
617 struct iwl_bt_uart_msg *uart_msg)
619 bool need_update = false;
620 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
623 if (!ctx->vif || (ctx->vif->type != NL80211_IFTYPE_STATION)) {
624 IWL_DEBUG_INFO(priv, "BSS ctx not active or not in sta mode\n");
628 ave_rssi = ieee80211_ave_rssi(ctx->vif);
630 /* no rssi data, no changes to reduce tx power */
631 IWL_DEBUG_COEX(priv, "no rssi data available\n");
634 if (!priv->reduced_txpower &&
635 !iwl_is_associated(priv, IWL_RXON_CTX_PAN) &&
636 (ave_rssi > BT_ENABLE_REDUCED_TXPOWER_THRESHOLD) &&
637 (uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK |
638 BT_UART_MSG_FRAME3OBEX_MSK)) &&
639 !(uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK |
640 BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK))) {
641 /* enabling reduced tx power */
642 priv->reduced_txpower = true;
643 priv->bt_valid |= IWLAGN_BT_VALID_REDUCED_TX_PWR;
645 } else if (priv->reduced_txpower &&
646 (iwl_is_associated(priv, IWL_RXON_CTX_PAN) ||
647 (ave_rssi < BT_DISABLE_REDUCED_TXPOWER_THRESHOLD) ||
648 (uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK |
649 BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK)) ||
650 !(uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK |
651 BT_UART_MSG_FRAME3OBEX_MSK)))) {
652 /* disable reduced tx power */
653 priv->reduced_txpower = false;
654 priv->bt_valid |= IWLAGN_BT_VALID_REDUCED_TX_PWR;
661 int iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
662 struct iwl_rx_cmd_buffer *rxb,
663 struct iwl_device_cmd *cmd)
665 struct iwl_rx_packet *pkt = rxb_addr(rxb);
666 struct iwl_bt_coex_profile_notif *coex = (void *)pkt->data;
667 struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg;
669 if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) {
670 /* bt coex disabled */
674 IWL_DEBUG_COEX(priv, "BT Coex notification:\n");
675 IWL_DEBUG_COEX(priv, " status: %d\n", coex->bt_status);
676 IWL_DEBUG_COEX(priv, " traffic load: %d\n", coex->bt_traffic_load);
677 IWL_DEBUG_COEX(priv, " CI compliance: %d\n",
678 coex->bt_ci_compliance);
679 iwlagn_print_uartmsg(priv, uart_msg);
681 priv->last_bt_traffic_load = priv->bt_traffic_load;
682 priv->bt_is_sco = iwlagn_bt_traffic_is_sco(uart_msg);
684 if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
685 if (priv->bt_status != coex->bt_status ||
686 priv->last_bt_traffic_load != coex->bt_traffic_load) {
687 if (coex->bt_status) {
689 if (!priv->bt_ch_announce)
690 priv->bt_traffic_load =
691 IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
693 priv->bt_traffic_load =
694 coex->bt_traffic_load;
697 priv->bt_traffic_load =
698 IWL_BT_COEX_TRAFFIC_LOAD_NONE;
700 priv->bt_status = coex->bt_status;
701 queue_work(priv->workqueue,
702 &priv->bt_traffic_change_work);
706 /* schedule to send runtime bt_config */
707 /* check reduce power before change ack/cts kill mask */
708 if (iwlagn_fill_txpower_mode(priv, uart_msg) ||
709 iwlagn_set_kill_msk(priv, uart_msg))
710 queue_work(priv->workqueue, &priv->bt_runtime_config);
713 /* FIXME: based on notification, adjust the prio_boost */
715 priv->bt_ci_compliance = coex->bt_ci_compliance;
719 void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv)
721 priv->rx_handlers[REPLY_BT_COEX_PROFILE_NOTIF] =
722 iwlagn_bt_coex_profile_notif;
725 void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv)
727 INIT_WORK(&priv->bt_traffic_change_work,
728 iwlagn_bt_traffic_change_work);
731 void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv)
733 cancel_work_sync(&priv->bt_traffic_change_work);
736 static bool is_single_rx_stream(struct iwl_priv *priv)
738 return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
739 priv->current_ht_config.single_chain_sufficient;
742 #define IWL_NUM_RX_CHAINS_MULTIPLE 3
743 #define IWL_NUM_RX_CHAINS_SINGLE 2
744 #define IWL_NUM_IDLE_CHAINS_DUAL 2
745 #define IWL_NUM_IDLE_CHAINS_SINGLE 1
748 * Determine how many receiver/antenna chains to use.
750 * More provides better reception via diversity. Fewer saves power
751 * at the expense of throughput, but only when not in powersave to
754 * MIMO (dual stream) requires at least 2, but works better with 3.
755 * This does not determine *which* chains to use, just how many.
757 static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
759 if (priv->cfg->bt_params &&
760 priv->cfg->bt_params->advanced_bt_coexist &&
761 (priv->bt_full_concurrent ||
762 priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
764 * only use chain 'A' in bt high traffic load or
765 * full concurrency mode
767 return IWL_NUM_RX_CHAINS_SINGLE;
769 /* # of Rx chains to use when expecting MIMO. */
770 if (is_single_rx_stream(priv))
771 return IWL_NUM_RX_CHAINS_SINGLE;
773 return IWL_NUM_RX_CHAINS_MULTIPLE;
777 * When we are in power saving mode, unless device support spatial
778 * multiplexing power save, use the active count for rx chain count.
780 static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
782 /* # Rx chains when idling, depending on SMPS mode */
783 switch (priv->current_ht_config.smps) {
784 case IEEE80211_SMPS_STATIC:
785 case IEEE80211_SMPS_DYNAMIC:
786 return IWL_NUM_IDLE_CHAINS_SINGLE;
787 case IEEE80211_SMPS_AUTOMATIC:
788 case IEEE80211_SMPS_OFF:
791 WARN(1, "invalid SMPS mode %d",
792 priv->current_ht_config.smps);
798 static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
801 res = (chain_bitmap & BIT(0)) >> 0;
802 res += (chain_bitmap & BIT(1)) >> 1;
803 res += (chain_bitmap & BIT(2)) >> 2;
804 res += (chain_bitmap & BIT(3)) >> 3;
809 * iwlagn_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
811 * Selects how many and which Rx receivers/antennas/chains to use.
812 * This should not be used for scan command ... it puts data in wrong place.
814 void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
816 bool is_single = is_single_rx_stream(priv);
817 bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
818 u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
822 /* Tell uCode which antennas are actually connected.
823 * Before first association, we assume all antennas are connected.
824 * Just after first association, iwl_chain_noise_calibration()
825 * checks which antennas actually *are* connected. */
826 if (priv->chain_noise_data.active_chains)
827 active_chains = priv->chain_noise_data.active_chains;
829 active_chains = priv->eeprom_data->valid_rx_ant;
831 if (priv->cfg->bt_params &&
832 priv->cfg->bt_params->advanced_bt_coexist &&
833 (priv->bt_full_concurrent ||
834 priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
836 * only use chain 'A' in bt high traffic load or
837 * full concurrency mode
839 active_chains = first_antenna(active_chains);
842 rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
844 /* How many receivers should we use? */
845 active_rx_cnt = iwl_get_active_rx_chain_count(priv);
846 idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
849 /* correct rx chain count according hw settings
850 * and chain noise calibration
852 valid_rx_cnt = iwl_count_chain_bitmap(active_chains);
853 if (valid_rx_cnt < active_rx_cnt)
854 active_rx_cnt = valid_rx_cnt;
856 if (valid_rx_cnt < idle_rx_cnt)
857 idle_rx_cnt = valid_rx_cnt;
859 rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
860 rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
862 ctx->staging.rx_chain = cpu_to_le16(rx_chain);
864 if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam)
865 ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
867 ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
869 IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n",
870 ctx->staging.rx_chain,
871 active_rx_cnt, idle_rx_cnt);
873 WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
874 active_rx_cnt < idle_rx_cnt);
877 u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid)
882 if (priv->band == IEEE80211_BAND_2GHZ &&
883 priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)
886 for (i = 0; i < RATE_ANT_NUM - 1; i++) {
887 ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0;
888 if (valid & BIT(ind))
894 #ifdef CONFIG_PM_SLEEP
895 static void iwlagn_convert_p1k(u16 *p1k, __le16 *out)
899 for (i = 0; i < IWLAGN_P1K_SIZE; i++)
900 out[i] = cpu_to_le16(p1k[i]);
903 struct wowlan_key_data {
904 struct iwl_rxon_context *ctx;
905 struct iwlagn_wowlan_rsc_tsc_params_cmd *rsc_tsc;
906 struct iwlagn_wowlan_tkip_params_cmd *tkip;
908 bool error, use_rsc_tsc, use_tkip;
912 static void iwlagn_wowlan_program_keys(struct ieee80211_hw *hw,
913 struct ieee80211_vif *vif,
914 struct ieee80211_sta *sta,
915 struct ieee80211_key_conf *key,
918 struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
919 struct wowlan_key_data *data = _data;
920 struct iwl_rxon_context *ctx = data->ctx;
921 struct aes_sc *aes_sc, *aes_tx_sc = NULL;
922 struct tkip_sc *tkip_sc, *tkip_tx_sc = NULL;
923 struct iwlagn_p1k_cache *rx_p1ks;
925 struct ieee80211_key_seq seq;
927 u16 p1k[IWLAGN_P1K_SIZE];
930 mutex_lock(&priv->mutex);
932 if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
933 key->cipher == WLAN_CIPHER_SUITE_WEP104) &&
934 !sta && !ctx->key_mapping_keys)
935 ret = iwl_set_default_wep_key(priv, ctx, key);
937 ret = iwl_set_dynamic_key(priv, ctx, key, sta);
940 IWL_ERR(priv, "Error setting key during suspend!\n");
944 switch (key->cipher) {
945 case WLAN_CIPHER_SUITE_TKIP:
947 tkip_sc = data->rsc_tsc->all_tsc_rsc.tkip.unicast_rsc;
948 tkip_tx_sc = &data->rsc_tsc->all_tsc_rsc.tkip.tsc;
950 rx_p1ks = data->tkip->rx_uni;
952 ieee80211_get_key_tx_seq(key, &seq);
953 tkip_tx_sc->iv16 = cpu_to_le16(seq.tkip.iv16);
954 tkip_tx_sc->iv32 = cpu_to_le32(seq.tkip.iv32);
956 ieee80211_get_tkip_p1k_iv(key, seq.tkip.iv32, p1k);
957 iwlagn_convert_p1k(p1k, data->tkip->tx.p1k);
959 memcpy(data->tkip->mic_keys.tx,
960 &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY],
961 IWLAGN_MIC_KEY_SIZE);
963 rx_mic_key = data->tkip->mic_keys.rx_unicast;
966 data->rsc_tsc->all_tsc_rsc.tkip.multicast_rsc;
967 rx_p1ks = data->tkip->rx_multi;
968 rx_mic_key = data->tkip->mic_keys.rx_mcast;
972 * For non-QoS this relies on the fact that both the uCode and
973 * mac80211 use TID 0 (as they need to to avoid replay attacks)
974 * for checking the IV in the frames.
976 for (i = 0; i < IWLAGN_NUM_RSC; i++) {
977 ieee80211_get_key_rx_seq(key, i, &seq);
978 tkip_sc[i].iv16 = cpu_to_le16(seq.tkip.iv16);
979 tkip_sc[i].iv32 = cpu_to_le32(seq.tkip.iv32);
980 /* wrapping isn't allowed, AP must rekey */
981 if (seq.tkip.iv32 > cur_rx_iv32)
982 cur_rx_iv32 = seq.tkip.iv32;
985 ieee80211_get_tkip_rx_p1k(key, data->bssid, cur_rx_iv32, p1k);
986 iwlagn_convert_p1k(p1k, rx_p1ks[0].p1k);
987 ieee80211_get_tkip_rx_p1k(key, data->bssid,
988 cur_rx_iv32 + 1, p1k);
989 iwlagn_convert_p1k(p1k, rx_p1ks[1].p1k);
992 &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY],
993 IWLAGN_MIC_KEY_SIZE);
995 data->use_tkip = true;
996 data->use_rsc_tsc = true;
998 case WLAN_CIPHER_SUITE_CCMP:
1000 u8 *pn = seq.ccmp.pn;
1002 aes_sc = data->rsc_tsc->all_tsc_rsc.aes.unicast_rsc;
1003 aes_tx_sc = &data->rsc_tsc->all_tsc_rsc.aes.tsc;
1005 ieee80211_get_key_tx_seq(key, &seq);
1006 aes_tx_sc->pn = cpu_to_le64(
1009 ((u64)pn[3] << 16) |
1010 ((u64)pn[2] << 24) |
1011 ((u64)pn[1] << 32) |
1012 ((u64)pn[0] << 40));
1014 aes_sc = data->rsc_tsc->all_tsc_rsc.aes.multicast_rsc;
1017 * For non-QoS this relies on the fact that both the uCode and
1018 * mac80211 use TID 0 for checking the IV in the frames.
1020 for (i = 0; i < IWLAGN_NUM_RSC; i++) {
1021 u8 *pn = seq.ccmp.pn;
1023 ieee80211_get_key_rx_seq(key, i, &seq);
1024 aes_sc->pn = cpu_to_le64(
1027 ((u64)pn[3] << 16) |
1028 ((u64)pn[2] << 24) |
1029 ((u64)pn[1] << 32) |
1030 ((u64)pn[0] << 40));
1032 data->use_rsc_tsc = true;
1036 mutex_unlock(&priv->mutex);
1039 int iwlagn_send_patterns(struct iwl_priv *priv,
1040 struct cfg80211_wowlan *wowlan)
1042 struct iwlagn_wowlan_patterns_cmd *pattern_cmd;
1043 struct iwl_host_cmd cmd = {
1044 .id = REPLY_WOWLAN_PATTERNS,
1045 .dataflags[0] = IWL_HCMD_DFL_NOCOPY,
1050 if (!wowlan->n_patterns)
1053 cmd.len[0] = sizeof(*pattern_cmd) +
1054 wowlan->n_patterns * sizeof(struct iwlagn_wowlan_pattern);
1056 pattern_cmd = kmalloc(cmd.len[0], GFP_KERNEL);
1060 pattern_cmd->n_patterns = cpu_to_le32(wowlan->n_patterns);
1062 for (i = 0; i < wowlan->n_patterns; i++) {
1063 int mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8);
1065 memcpy(&pattern_cmd->patterns[i].mask,
1066 wowlan->patterns[i].mask, mask_len);
1067 memcpy(&pattern_cmd->patterns[i].pattern,
1068 wowlan->patterns[i].pattern,
1069 wowlan->patterns[i].pattern_len);
1070 pattern_cmd->patterns[i].mask_size = mask_len;
1071 pattern_cmd->patterns[i].pattern_size =
1072 wowlan->patterns[i].pattern_len;
1075 cmd.data[0] = pattern_cmd;
1076 err = iwl_dvm_send_cmd(priv, &cmd);
1081 int iwlagn_suspend(struct iwl_priv *priv, struct cfg80211_wowlan *wowlan)
1083 struct iwlagn_wowlan_wakeup_filter_cmd wakeup_filter_cmd;
1084 struct iwl_rxon_cmd rxon;
1085 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
1086 struct iwlagn_wowlan_kek_kck_material_cmd kek_kck_cmd;
1087 struct iwlagn_wowlan_tkip_params_cmd tkip_cmd = {};
1088 struct iwlagn_d3_config_cmd d3_cfg_cmd = {};
1089 struct wowlan_key_data key_data = {
1091 .bssid = ctx->active.bssid_addr,
1092 .use_rsc_tsc = false,
1099 key_data.rsc_tsc = kzalloc(sizeof(*key_data.rsc_tsc), GFP_KERNEL);
1100 if (!key_data.rsc_tsc)
1103 memset(&wakeup_filter_cmd, 0, sizeof(wakeup_filter_cmd));
1106 * We know the last used seqno, and the uCode expects to know that
1107 * one, it will increment before TX.
1109 seq = le16_to_cpu(priv->last_seq_ctl) & IEEE80211_SCTL_SEQ;
1110 wakeup_filter_cmd.non_qos_seq = cpu_to_le16(seq);
1113 * For QoS counters, we store the one to use next, so subtract 0x10
1114 * since the uCode will add 0x10 before using the value.
1116 for (i = 0; i < IWL_MAX_TID_COUNT; i++) {
1117 seq = priv->tid_data[IWL_AP_ID][i].seq_number;
1119 wakeup_filter_cmd.qos_seq[i] = cpu_to_le16(seq);
1122 if (wowlan->disconnect)
1123 wakeup_filter_cmd.enabled |=
1124 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_BEACON_MISS |
1125 IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE);
1126 if (wowlan->magic_pkt)
1127 wakeup_filter_cmd.enabled |=
1128 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET);
1129 if (wowlan->gtk_rekey_failure)
1130 wakeup_filter_cmd.enabled |=
1131 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL);
1132 if (wowlan->eap_identity_req)
1133 wakeup_filter_cmd.enabled |=
1134 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ);
1135 if (wowlan->four_way_handshake)
1136 wakeup_filter_cmd.enabled |=
1137 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE);
1138 if (wowlan->n_patterns)
1139 wakeup_filter_cmd.enabled |=
1140 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH);
1142 if (wowlan->rfkill_release)
1143 d3_cfg_cmd.wakeup_flags |=
1144 cpu_to_le32(IWLAGN_D3_WAKEUP_RFKILL);
1146 iwl_scan_cancel_timeout(priv, 200);
1148 memcpy(&rxon, &ctx->active, sizeof(rxon));
1150 priv->ucode_loaded = false;
1151 iwl_trans_stop_device(priv->trans);
1153 priv->wowlan = true;
1155 ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_WOWLAN);
1159 /* now configure WoWLAN ucode */
1160 ret = iwl_alive_start(priv);
1164 memcpy(&ctx->staging, &rxon, sizeof(rxon));
1165 ret = iwlagn_commit_rxon(priv, ctx);
1169 ret = iwl_power_update_mode(priv, true);
1173 if (!iwlwifi_mod_params.sw_crypto) {
1174 /* mark all keys clear */
1175 priv->ucode_key_table = 0;
1176 ctx->key_mapping_keys = 0;
1179 * This needs to be unlocked due to lock ordering
1180 * constraints. Since we're in the suspend path
1181 * that isn't really a problem though.
1183 mutex_unlock(&priv->mutex);
1184 ieee80211_iter_keys(priv->hw, ctx->vif,
1185 iwlagn_wowlan_program_keys,
1187 mutex_lock(&priv->mutex);
1188 if (key_data.error) {
1193 if (key_data.use_rsc_tsc) {
1194 struct iwl_host_cmd rsc_tsc_cmd = {
1195 .id = REPLY_WOWLAN_TSC_RSC_PARAMS,
1197 .data[0] = key_data.rsc_tsc,
1198 .dataflags[0] = IWL_HCMD_DFL_NOCOPY,
1199 .len[0] = sizeof(*key_data.rsc_tsc),
1202 ret = iwl_dvm_send_cmd(priv, &rsc_tsc_cmd);
1207 if (key_data.use_tkip) {
1208 ret = iwl_dvm_send_cmd_pdu(priv,
1209 REPLY_WOWLAN_TKIP_PARAMS,
1210 CMD_SYNC, sizeof(tkip_cmd),
1216 if (priv->have_rekey_data) {
1217 memset(&kek_kck_cmd, 0, sizeof(kek_kck_cmd));
1218 memcpy(kek_kck_cmd.kck, priv->kck, NL80211_KCK_LEN);
1219 kek_kck_cmd.kck_len = cpu_to_le16(NL80211_KCK_LEN);
1220 memcpy(kek_kck_cmd.kek, priv->kek, NL80211_KEK_LEN);
1221 kek_kck_cmd.kek_len = cpu_to_le16(NL80211_KEK_LEN);
1222 kek_kck_cmd.replay_ctr = priv->replay_ctr;
1224 ret = iwl_dvm_send_cmd_pdu(priv,
1225 REPLY_WOWLAN_KEK_KCK_MATERIAL,
1226 CMD_SYNC, sizeof(kek_kck_cmd),
1233 ret = iwl_dvm_send_cmd_pdu(priv, REPLY_D3_CONFIG, CMD_SYNC,
1234 sizeof(d3_cfg_cmd), &d3_cfg_cmd);
1238 ret = iwl_dvm_send_cmd_pdu(priv, REPLY_WOWLAN_WAKEUP_FILTER,
1239 CMD_SYNC, sizeof(wakeup_filter_cmd),
1240 &wakeup_filter_cmd);
1244 ret = iwlagn_send_patterns(priv, wowlan);
1246 kfree(key_data.rsc_tsc);
1251 int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
1253 if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) {
1254 IWL_WARN(priv, "Not sending command - %s KILL\n",
1255 iwl_is_rfkill(priv) ? "RF" : "CT");
1259 if (test_bit(STATUS_FW_ERROR, &priv->status)) {
1260 IWL_ERR(priv, "Command %s failed: FW Error\n",
1261 iwl_dvm_get_cmd_string(cmd->id));
1266 * Synchronous commands from this op-mode must hold
1267 * the mutex, this ensures we don't try to send two
1268 * (or more) synchronous commands at a time.
1270 if (!(cmd->flags & CMD_ASYNC))
1271 lockdep_assert_held(&priv->mutex);
1273 if (priv->ucode_owner == IWL_OWNERSHIP_TM &&
1274 !(cmd->flags & CMD_ON_DEMAND)) {
1275 IWL_DEBUG_HC(priv, "tm own the uCode, no regular hcmd send\n");
1279 return iwl_trans_send_cmd(priv->trans, cmd);
1282 int iwl_dvm_send_cmd_pdu(struct iwl_priv *priv, u8 id,
1283 u32 flags, u16 len, const void *data)
1285 struct iwl_host_cmd cmd = {
1292 return iwl_dvm_send_cmd(priv, &cmd);