removed ecum files, should be picked from generic instead

diff --git a/boards/mpc5606s_xpc560s/config/EcuM_Callout_template.c b/boards/mpc5606s_xpc560s/config/EcuM_Callout_template.c
deleted file mode 100644 (file)
index 623d7f8..0000000
--- a/boards/mpc5606s_xpc560s/config/EcuM_Callout_template.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/*\r
-* Configuration of module: EcuM (EcuM_Callout_template.c)\r
-*\r
-* Created by:              \r
-* Copyright:               \r
-*\r
-* Configured for (MCU):    MPC551x\r
-*\r
-* Module vendor:           ArcCore\r
-* Generator version:       2.0.2\r
-*\r
-* Generated by Arctic Studio (http://arccore.com) \r
-*           on Tue May 31 15:51:45 CEST 2011\r
-*/\r
-\r
-\r
-#include "EcuM.h"\r
-#include "EcuM_Cbk.h"\r
-#include "Det.h"\r
-#if defined(USE_DEM)\r
-#include "Dem.h"\r
-#endif\r
-#if defined(USE_MCU)\r
-#include "Mcu.h"\r
-#endif\r
-#if defined(USE_GPT)\r
-#include "Gpt.h"\r
-#endif\r
-#if defined(USE_CAN)\r
-#include "Can.h"\r
-#endif\r
-#if defined(USE_CANIF)\r
-#include "CanIf.h"\r
-#endif\r
-#if defined(USE_PDUR)\r
-#include "PduR.h"\r
-#endif\r
-#if defined(USE_COM)\r
-#include "Com.h"\r
-#endif\r
-#if defined(USE_CANTP)\r
-#include "CanTp.h"\r
-#endif\r
-#if defined(USE_DCM)\r
-#include "Dcm.h"\r
-#endif\r
-#if defined(USE_PWM)\r
-#include "Pwm.h"\r
-#endif\r
-#if defined(USE_IOHWAB)\r
-#include "IoHwAb.h"\r
-#endif\r
-#if defined(USE_FLS)\r
-#include "Fls.h"\r
-#endif\r
-#if defined(USE_EEP)\r
-#include "Eep.h"\r
-#endif\r
-#if defined(USE_FEE)\r
-#include "Fee.h"\r
-#endif\r
-#if defined(USE_EA)\r
-#include "Ea.h"\r
-#endif\r
-#if defined(USE_NVM)\r
-#include "NvM.h"\r
-#endif\r
-#if defined(USE_COMM)\r
-#include "ComM.h"\r
-#endif\r
-#if defined(USE_NM)\r
-#include "Nm.h"\r
-#endif\r
-#if defined(USE_CANNM)\r
-#include "CanNm.h"\r
-#endif\r
-#if defined(USE_CANSM)\r
-#include "CanSM.h"\r
-#endif\r
-#if defined(USE_LINSM)\r
-#include "LinSM.h"\r
-#endif\r
-#if defined(USE_SPI)\r
-#include "Spi.h"\r
-#endif\r
-\r
-void EcuM_AL_DriverInitZero(void)\r
-{\r
-#if defined(USE_DET)\r
-       Det_Init();\r
-    Det_Start();\r
-#endif\r
-}\r
-\r
-EcuM_ConfigType* EcuM_DeterminePbConfiguration(void)\r
-{\r
-       return &EcuMConfig;\r
-}\r
-\r
-void EcuM_AL_DriverInitOne(const EcuM_ConfigType *ConfigPtr)\r
-{\r
-  //lint --e{715}       PC-Lint (715) - ConfigPtr usage depends on configuration of modules\r
-\r
-#if defined(USE_MCU)\r
-       Mcu_Init(ConfigPtr->McuConfig);\r
-\r
-       // Set up default clock (Mcu_InitClock requires initRun==1)\r
-       // Ignoring return value\r
-       (void) Mcu_InitClock( ConfigPtr->McuConfig->McuDefaultClockSettings );\r
-\r
-       // Wait for PLL to sync.\r
-       while (Mcu_GetPllStatus() != MCU_PLL_LOCKED)\r
-       {\r
-         ;\r
-       }\r
-#endif\r
-\r
-#if defined(USE_DEM)\r
-       // Preinitialize DEM\r
-       Dem_PreInit();\r
-#endif\r
-\r
-#if defined(USE_PORT)\r
-       // Setup Port\r
-       Port_Init(ConfigPtr->PortConfig);\r
-#endif\r
-\r
-\r
-#if defined(USE_GPT)\r
-       // Setup the GPT\r
-       Gpt_Init(ConfigPtr->GptConfig);\r
-#endif\r
-\r
-       // Setup watchdog\r
-       // TODO\r
-\r
-#if defined(USE_DMA)\r
-       // Setup DMA\r
-       Dma_Init(ConfigPtr->DmaConfig);\r
-#endif\r
-\r
-#if defined(USE_ADC)\r
-       // Setup ADC\r
-       Adc_Init(ConfigPtr->AdcConfig);\r
-#endif\r
-\r
-       // Setup ICU\r
-       // TODO\r
-\r
-       // Setup PWM\r
-#if defined(USE_PWM)\r
-       // Setup PWM\r
-       Pwm_Init(ConfigPtr->PwmConfig);\r
-#endif\r
-}\r
-\r
-void EcuM_AL_DriverInitTwo(const EcuM_ConfigType* ConfigPtr)\r
-{\r
-  //lint --e{715}       PC-Lint (715) - ConfigPtr usage depends on configuration of modules\r
-\r
-#if defined(USE_SPI)\r
-       // Setup SPI\r
-       Spi_Init(ConfigPtr->SpiConfig);\r
-#endif\r
-\r
-#if defined(USE_EEP)\r
-       // Setup EEP\r
-       Eep_Init(ConfigPtr->EepConfig);\r
-#endif\r
-\r
-#if defined(USE_FLS)\r
-       // Setup Flash\r
-       Fls_Init(ConfigPtr->FlashConfig);\r
-#endif\r
-\r
-#if defined(USE_FEE)\r
-       // Setup FEE\r
-       Fee_Init();\r
-#endif\r
-\r
-#if defined(USE_EA)\r
-       // Setup EA\r
-       Ea_init();\r
-#endif\r
-\r
-#if defined(USE_NVM)\r
-       // Setup NVRAM Manager and start the read all job\r
-       NvM_Init();\r
-       NvM_ReadAll();\r
-#endif\r
-\r
-       // Setup CAN tranceiver\r
-       // TODO\r
-\r
-#if defined(USE_CAN)\r
-       // Setup Can driver\r
-       Can_Init(ConfigPtr->CanConfig);\r
-#endif\r
-\r
-#if defined(USE_CANIF)\r
-       // Setup CanIf\r
-       CanIf_Init(ConfigPtr->CanIfConfig);\r
-#endif\r
-\r
-#if defined(USE_CANTP)\r
-       // Setup CAN TP\r
-       CanTp_Init();\r
-#endif\r
-\r
-#if defined(USE_CANSM)\r
-        CanSM_Init(ConfigPtr->CanSMConfig);\r
-#endif\r
-\r
-       // Setup LIN\r
-       // TODO\r
-\r
-#if defined(USE_PDUR)\r
-       // Setup PDU Router\r
-       PduR_Init(ConfigPtr->PduRConfig);\r
-#endif\r
-\r
-#if defined(USE_CANNM)\r
-        // Setup Can Network Manager\r
-        CanNm_Init(ConfigPtr->CanNmConfig);\r
-#endif\r
-\r
-#if defined(USE_NM)\r
-        // Setup Network Management Interface\r
-        Nm_Init(ConfigPtr->NmConfig);\r
-#endif\r
-\r
-#if defined(USE_COM)\r
-       // Setup COM layer\r
-       Com_Init(ConfigPtr->ComConfig);\r
-#endif\r
-\r
-#if defined(USE_DCM)\r
-       // Setup DCM\r
-       Dcm_Init();\r
-#endif\r
-\r
-#if defined(USE_IOHWAB)\r
-       // Setup IO hardware abstraction layer\r
-       IoHwAb_Init();\r
-#endif\r
-\r
-}\r
-\r
-void EcuM_AL_DriverInitThree(const EcuM_ConfigType* ConfigPtr)\r
-{\r
-  //lint --e{715}       PC-Lint (715) - ConfigPtr usage depends on configuration of modules\r
-\r
-#if defined(USE_DEM)\r
-       // Setup DEM\r
-       Dem_Init();\r
-#endif\r
-\r
-#if defined(USE_COMM)\r
-        // Setup Communication Manager\r
-        ComM_Init(ConfigPtr->ComMConfig);\r
-#endif\r
-}\r
-\r
-void EcuM_OnEnterRUN(void)\r
-{\r
-\r
-}\r
-\r
-void EcuM_OnExitRun(void)\r
-{\r
-\r
-}\r
-\r
-void EcuM_OnExitPostRun(void)\r
-{\r
-\r
-}\r
-\r
-void EcuM_OnPrepShutdown(void)\r
-{\r
-\r
-}\r
-\r
-void EcuM_OnGoSleep(void)\r
-{\r
-\r
-}\r
-\r
-void EcuM_OnGoOffOne(void)\r
-{\r
-\r
-}\r
-\r
-void EcuM_OnGoOffTwo(void)\r
-{\r
-\r
-}\r
-\r
-void EcuM_AL_SwitchOff(void)\r
-{\r
-\r
-}\r

diff --git a/boards/mpc5606s_xpc560s/config/EcuM_Generated_Types.h b/boards/mpc5606s_xpc560s/config/EcuM_Generated_Types.h
deleted file mode 100644 (file)
index 73a8d84..0000000
--- a/boards/mpc5606s_xpc560s/config/EcuM_Generated_Types.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*\r
-* Configuration of module: EcuM (EcuM_Generated_Types.h)\r
-*\r
-* Created by:              \r
-* Copyright:               \r
-*\r
-* Configured for (MCU):    MPC551x\r
-*\r
-* Module vendor:           ArcCore\r
-* Generator version:       2.0.2\r
-*\r
-* Generated by Arctic Studio (http://arccore.com) \r
-*           on Tue May 31 15:51:45 CEST 2011\r
-*/\r
-\r
-
-#if !(((ECUM_SW_MAJOR_VERSION == 2) && (ECUM_SW_MINOR_VERSION == 0)) )
-#error EcuM: Configuration file expected BSW module version to be 2.0.*
-#endif
-
-\r
-#ifndef _ECUM_GENERATED_TYPES_H_\r
-#define _ECUM_GENERATED_TYPES_H_\r
-\r
-#if defined(USE_MCU)\r
-#include "Mcu.h"\r
-#endif\r
-#if defined(USE_PORT)\r
-#include "Port.h"\r
-#endif\r
-#if defined(USE_CAN)\r
-#include "Can.h"\r
-#endif\r
-#if defined(USE_CANIF)\r
-#include "CanIf.h"\r
-#endif\r
-#if defined(USE_PWM)\r
-#include "Pwm.h"\r
-#endif\r
-#if defined(USE_COM)\r
-#include "Com.h"\r
-#endif\r
-#if defined(USE_PDUR)\r
-#include "PduR.h"\r
-#endif\r
-#if defined(USE_DMA)\r
-#include "Dma.h"\r
-#endif\r
-#if defined(USE_ADC)\r
-#include "Adc.h"\r
-#endif\r
-#if defined(USE_GPT)\r
-#include "Gpt.h"\r
-#endif\r
-#if defined(USE_COMM)\r
-#include "ComM.h"\r
-#endif\r
-#if defined(USE_NM)\r
-#include "Nm.h"\r
-#endif\r
-#if defined(USE_CANNM)\r
-#include "CanNm.h"\r
-#endif\r
-#if defined(USE_CANSM)\r
-#include "CanSM.h"\r
-#endif\r
-#if defined(USE_LINSM)\r
-#include "LinSM.h"\r
-#endif\r
-#if defined(USE_FLS)\r
-#include "Fls.h"\r
-#endif\r
-#if defined(USE_EEP)\r
-#include "Eep.h"\r
-#endif\r
-#if defined(USE_SPI)\r
-#include "Spi.h"\r
-#endif\r
-#if defined(USE_WDG)\r
-#include "Wdg.h"\r
-#endif\r
-#if defined(USE_WDGM)\r
-#include "WdgM.h"\r
-#endif\r
-#if defined(USE_WDGIF)\r
-#include "WdgIf.h"\r
-#endif\r
-typedef struct\r
-{\r
-       EcuM_StateType EcuMDefaultShutdownTarget;\r
-       uint8 EcuMDefaultSleepMode;\r
-       AppModeType EcuMDefaultAppMode;\r
-       uint32 EcuMRunMinimumDuration;\r
-       uint32 EcuMNvramReadAllTimeout;\r
-       uint32 EcuMNvramWriteAllTimeout;\r
-\r
-#if defined(USE_MCU)\r
-        const Mcu_ConfigType* McuConfig;\r
-#endif\r
-#if defined(USE_PORT)\r
-        const Port_ConfigType* PortConfig;\r
-#endif\r
-#if defined(USE_CAN)\r
-        const Can_ConfigType* CanConfig;\r
-#endif\r
-#if defined(USE_CANIF)\r
-        const CanIf_ConfigType* CanIfConfig;\r
-#endif\r
-#if defined(USE_CANSM)\r
-        const CanSM_ConfigType* CanSMConfig;\r
-#endif\r
-#if defined(USE_NM)\r
-        const Nm_ConfigType* NmConfig;\r
-#endif\r
-#if defined(USE_CANNM)\r
-        const CanNm_ConfigType* CanNmConfig;\r
-#endif\r
-#if defined(USE_COMM)\r
-        const ComM_ConfigType* ComMConfig;\r
-#endif\r
-#if defined(USE_COM)\r
-        const Com_ConfigType* ComConfig;\r
-#endif\r
-#if defined(USE_PDUR)\r
-        const PduR_PBConfigType* PduRConfig;\r
-#endif\r
-#if defined(USE_PWM)\r
-        const Pwm_ConfigType* PwmConfig;\r
-#endif\r
-#if defined(USE_DMA)\r
-        const Dma_ConfigType* DmaConfig;\r
-#endif\r
-#if defined(USE_ADC)\r
-    const Adc_ConfigType* AdcConfig;\r
-#endif\r
-#if defined(USE_GPT)\r
-    const Gpt_ConfigType* GptConfig;\r
-#endif\r
-#if defined(USE_FLS)\r
-       const Fls_ConfigType* FlashConfig;\r
-#endif\r
-#if defined(USE_EEP)\r
-       const Eep_ConfigType* EepConfig;\r
-#endif\r
-#if defined(USE_SPI)\r
-       const Spi_ConfigType* SpiConfig;\r
-#endif\r
-#if defined(USE_WDGM)\r
-    const WdgM_ConfigType* WdgMConfig;\r
-#endif\r
-#if defined(USE_WDGIF)\r
-    const WdgIf_ConfigType* WdgIfConfig;\r
-#endif\r
-} EcuM_ConfigType;\r
-\r
-#endif /*_ECUM_GENERATED_TYPES_H_*/\r