--- /dev/null
+# Generic directory or leaf node makefile for OCERA make framework
+
+ifndef MAKERULES_DIR
+MAKERULES_DIR := $(shell ( old_pwd="" ; while [ ! -e Makefile.rules ] ; do if [ "$$old_pwd" == `pwd` ] ; then exit 1 ; else old_pwd=`pwd` ; cd -L .. 2>/dev/null ; fi ; done ; pwd ) )
+endif
+
+ifeq ($(MAKERULES_DIR),)
+all : default
+.DEFAULT::
+ @echo -e "\nThe Makefile.rules has not been found in this or partent directory\n"
+else
+include $(MAKERULES_DIR)/Makefile.rules
+endif
+
--- /dev/null
+SUBDIRS = system_opt libbar appfoo
+
--- /dev/null
+# Makefile.rules - OCERA make framework common project rules
+# This version is adapted for RTEMS build
+#
+# (C) Copyright 2003 by Pavel Pisa - OCERA team member
+#
+# The uLan driver is distributed under the Gnu General Public License.
+# See file COPYING for details.
+#
+#
+# input variables
+# V .. if set to 1, full command text is shown else short form is used
+# SUBDIRS .. list of subdirectories intended for make from actual directory
+# lib_LIBRARIES .. list of the user-space libraries
+# shared_LIBRARIES .. list of the user-space shared libraries
+# include_HEADERS .. list of the user-space public header files
+# nobase_include_HEADERS .. public headers copied even with directory part
+# renamed_include_HEADERS .. public headers copied to the different target name
+# bin_PROGRAMS .. list of the require binary programs
+# utils_PROGRAMS .. list of the development utility programs
+# xxx_SOURCES .. list of specific target sources
+# INCLUDES .. additional include directories and defines for user-space
+# default_CONFIG .. list of default config assignments CONFIG_XXX=y/n ...
+# tar_EMBEDFILES .. list of tars with embedded files
+#
+
+# Include RTEMS target configuration defining RTEMS_MAKEFILE_PATH
+include $(MAKERULES_DIR)/config.target
+
+include $(RTEMS_MAKEFILE_PATH)/Makefile.inc
+include $(RTEMS_CUSTOM)
+include $(CONFIG.CC)
+
+BUILD_DIR_NAME = _build/$(RTEMS_BSP)
+COMPILED_DIR_NAME = _compiled/$(RTEMS_BSP)
+GROUP_DIR_NAME =
+
+
+# We need to ensure definition of sources directory first
+ifndef SOURCES_DIR
+SOURCES_DIR := $(shell ( pwd -L ) )
+endif
+
+all: default
+
+USER_INCLUDE_DIR := $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/include
+USER_LIB_DIR := $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/lib
+USER_UTILS_DIR := $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/bin-utils
+USER_BIN_DIR := $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/bin
+USER_BUILD_DIR := $(MAKERULES_DIR)/$(BUILD_DIR_NAME)/user
+ifndef CONFIG_FILE
+CONFIG_FILE := $(MAKERULES_DIR)/config.omk
+endif
+ifneq ($(wildcard $(CONFIG_FILE)-default),)
+-include $(CONFIG_FILE)-default
+else
+$(warning Please, run "make default-config" first)
+endif
+ifneq ($(wildcard $(CONFIG_FILE)),)
+include $(CONFIG_FILE)
+CONFIG_FILE_OK = y
+endif
+
+# Check and include real OCERA style Makefile.omk now
+ifndef OMK_INCLUDED
+include $(SOURCES_DIR)/Makefile.omk
+OMK_INCLUDED := 1
+endif
+
+export SOURCES_DIR MAKERULES_DIR RELATIVE_DIR
+export CONFIG_FILE OMK_SERIALIZE_INCLUDED OMK_VERBOSE OMK_SILENT
+
+#CFLAGS += -ggdb
+#CFLAGS += -O2
+#CFLAGS += -Wall
+#CXXFLAGS += -ggdb
+#CXXFLAGS += -O2
+#CXXFLAGS += -Wall
+
+DEFAULT_INCLUDES = -I $(PROJECT_INCLUDE)
+
+CPPFLAGS += -I $(USER_INCLUDE_DIR)
+
+CPPFLAGS += $(CONFIG_OMK_DEFINES)
+
+#CPPFLAGS += $(AM_CPPFLAGS)
+#CFLAGS += $(AM_CFLAGS)
+#CXXFLAGS += $(AM_CXXFLAGS)
+#LDFLAGS += $(CFLAGS) $(AM_CFLAGS) $(LD_PATHS:%=-L%)
+
+LOADLIBES += -L$(USER_LIB_DIR)
+
+LOADLIBES += $(lib_LOADLIBES:%=-l%)
+
+SOLIB_PICFLAGS += -shared -fpic
+
+ifndef RELATIVE_DIR
+RELATIVE_DIR := $(SOURCES_DIR:$(MAKERULES_DIR)%=%)
+endif
+override RELATIVE_DIR := $(RELATIVE_DIR:/%=%)
+override RELATIVE_DIR := $(RELATIVE_DIR:\\%=%)
+#$(warning RELATIVE_DIR $(RELATIVE_DIR))
+
+#$(warning SOURCES_DIR = $(SOURCES_DIR))
+#$(warning MAKERULES_DIR = $(MAKERULES_DIR))
+#$(warning RELATIVE_DIR = $(RELATIVE_DIR))
+
+#vpath %.c $(SOURCES_DIR)
+#vpath %.cc $(SOURCES_DIR)
+#vpath %.cxx $(SOURCES_DIR)
+
+VPATH = $(SOURCES_DIR)
+srcdir = $(SOURCES_DIR)
+
+USER_OBJS_DIR = $(USER_BUILD_DIR)/$(RELATIVE_DIR)
+
+.PHONY: default dep subdirs clean cleandepend default-config
+.PHONY: check-make-ver check-dir include-pass library-pass binary-pass utils-pass
+.PHONY: default-config-pass
+.PHONY: check-dir-local include-pass-local library-pass-local binary-pass-local
+.PHONY: utils-pass-local default-config-pass-local
+
+# Some support to serialize some targets for parallel make
+ifneq ($(OMK_SERIALIZE_INCLUDED),y)
+include-pass: check-dir
+library-pass: include-pass
+binary-pass utils-pass: library-pass
+
+OMK_SERIALIZE_INCLUDED = y
+endif
+
+# Defines for quiet compilation
+ifdef V
+ ifeq ("$(origin V)", "command line")
+ OMK_VERBOSE = $(V)
+ endif
+endif
+ifndef OMK_VERBOSE
+ OMK_VERBOSE = 0
+endif
+ifeq ($(OMK_VERBOSE),1)
+ Q =
+else
+ Q = @
+endif
+ifneq ($(findstring s,$(MAKEFLAGS)),)
+ QUIET_CMD_ECHO = true
+ OMK_SILENT = 1
+else
+ QUIET_CMD_ECHO = echo
+ CPHEADER_FLAGS += -v
+endif
+
+default: check-make-ver check-dir include-pass library-pass binary-pass utils-pass
+
+#=====================================================================
+# Common utility rules
+
+define mkdir_def
+ [ -d $(1) ] || mkdir -p $(1) || exit 1
+endef
+
+ifdef LOCAL_CONFIG_H
+
+$(LOCAL_CONFIG_H) : $(wildcard $(CONFIG_FILE)) $(wildcard $(CONFIG_FILE)-default)
+ @echo LOCAL_CONFIG_H=`pwd`/$(LOCAL_CONFIG_H)
+ @echo "/* Automatically generated from */" > "$(LOCAL_CONFIG_H).tmp"
+ @echo "/* config file : $< */" >> "$(LOCAL_CONFIG_H).tmp"
+ @echo "#ifndef _LOCAL_CONFIG_H" >> "$(LOCAL_CONFIG_H).tmp"
+ @echo "#define _LOCAL_CONFIG_H" >> "$(LOCAL_CONFIG_H).tmp"
+ @( $(foreach x, $(shell echo $(default_CONFIG) | sed -e 's/\<\([^ ]*\)=[^ ]\>/\1/g' ), \
+ echo $(x).$($(x)) ; ) echo ; ) | \
+ sed -n -e 's/^\(.*\)\.[ym]$$/#define \1 1/p' \
+ >> "$(LOCAL_CONFIG_H).tmp"
+ @echo "#endif /*_LOCAL_CONFIG_H*/" >> "$(LOCAL_CONFIG_H).tmp"
+ @if cmp --quiet "$(LOCAL_CONFIG_H).tmp" "$(LOCAL_CONFIG_H)" ; then \
+ echo rm "$(LOCAL_CONFIG_H).tmp" ; \
+ else mv "$(LOCAL_CONFIG_H).tmp" "$(LOCAL_CONFIG_H)" ; \
+ echo Updated configuration "$(LOCAL_CONFIG_H)" ; fi
+
+endif
+
+check-make-ver:
+ @GOOD_MAKE_VERSION=`echo $(MAKE_VERSION) | sed -n -e 's/^[4-9]\..*\|^3\.9[0-9].*\|^3\.8[1-9].*/y/p'` ; \
+ if [ x$$GOOD_MAKE_VERSION != xy ] ; then \
+ echo "Your make program version is too old and does not support OMK system." ; \
+ echo "Please update to make program 3.81beta1 or newer." ; exit 1 ; \
+ fi
+
+#=====================================================================
+# Special rules for target filesystem and data preparation
+
+
+define TARFILE_template
+
+.PHONY: $(2)
+
+$(2):
+ $(Q) ABSOLUTETARFILE=`cd $$(dir $$@) ; pwd`/$$@ ; \
+ ( test -e $$$$ABSOLUTETARFILE && ( cd $(3) && tar -df $$$$ABSOLUTETARFILE ) ) || \
+ ( cd $(3) && tar -cf $$$$ABSOLUTETARFILE . )
+
+$(2).o: $(2)
+ @$(QUIET_CMD_ECHO) " TARFILE $$@"
+ $(Q) $(OBJCOPY) -I binary -O elf32-littlearm $$^ $$@
+
+endef
+
+#=====================================================================
+# User-space rules and templates to compile programs, libraries etc.
+
+ifdef USER_RULE_TEMPLATES
+
+
+#%.lo: %.c
+# $(CC) -o $@ $(LCFLAGS) -c $<
+
+c_o_COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) $(INCLUDES) -DOMK_FOR_USER
+
+cc_o_COMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CXXFLAGS) $(CFLAGS) $(INCLUDES) -DOMK_FOR_USER
+
+S_o_COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) $(ASFLAGS) -DOMK_FOR_USER
+
+# Check GCC version for user build
+ifndef CC_MAJOR_VERSION
+CC_MAJOR_VERSION := $(shell $(CC) -dumpversion | sed -e 's/\([^.]\)\..*/\1/')
+endif
+# Prepare suitable define for dependency building
+ifeq ($(CC_MAJOR_VERSION),2)
+CC_DEPFLAGS = -Wp,-MD,"$@.d.tmp"
+else
+CC_DEPFLAGS = -MT $@ -MD -MP -MF "$@.d.tmp"
+endif
+
+
+# Syntax: $(call COMPILE_c_o_template,<source>,<target>,<additional c-flags>)
+define COMPILE_c_o_template
+$(2): $(1) $(LOCAL_CONFIG_H) $$(GEN_HEADERS)
+ @$(QUIET_CMD_ECHO) " CC $$@"
+ $(Q) if $$(c_o_COMPILE) $$(CC_DEPFLAGS) $(3) -o $$@ -c $$< ; \
+ then mv -f "$$@.d.tmp" "$$@.d" ; \
+ else rm -f "$$@.d.tmp" ; exit 1; \
+ fi
+endef
+
+
+# Syntax: $(call COMPILE_cc_o_template,<source>,<target>,<additional c-flags>)
+define COMPILE_cc_o_template
+$(2): $(1) $(LOCAL_CONFIG_H) $$(GEN_HEADERS)
+ @$(QUIET_CMD_ECHO) " CXX $$@"
+ $(Q) if $$(cc_o_COMPILE) $$(CC_DEPFLAGS) $(3) -o $$@ -c $$< ; \
+ then mv -f "$$@.d.tmp" "$$@.d" ; \
+ else rm -f "$$@.d.tmp" ; exit 1; \
+ fi
+endef
+
+
+# Syntax: $(call COMPILE_S_o_template,<source>,<target>,<additional c-flags>)
+define COMPILE_S_o_template
+$(2): $(1) $(LOCAL_CONFIG_H) $$(GEN_HEADERS)
+ @$(QUIET_CMD_ECHO) " AS $$@"
+ $(Q) if $$(S_o_COMPILE) -D__ASSEMBLY__ $$(CC_DEPFLAGS) $(3) -o $$@ -c $$< ; \
+ then if [ -e "$$@.d.tmp" ] ; then mv -f "$$@.d.tmp" "$$@.d" ; fi ; \
+ else rm -f "$$@.d.tmp" ; exit 1; \
+ fi
+endef
+
+# Syntax: $(call CMETRIC_o_h_template,<object_file>,<target_header>)
+define CMETRIC_o_h_template
+$(2): $(1)
+ @$(QUIET_CMD_ECHO) " CMETRIC $$@"
+ $(Q)if [ -n `dirname $$@` ] ; then \
+ if [ ! -e `dirname $$@` ] ; then \
+ mkdir -p `dirname $$@` ; fi ; fi
+ $(Q)echo >$$@ '/* Automatically generated from $$< */'
+ $(Q)echo >>$$@ '/* Conditionals to control compilation */'
+ $(Q)set -o pipefail ; $(NM) $$< \
+ | sed -n 's/^ *0*\(0[0-9A-Fa-f]*\) *A *_cmetric2cond_\([A-Za-z_0-9]*\) */#define \2 0x\1/p' \
+ | sort >>$$@
+ $(Q)echo >>$$@ '/* Defines from the values defined to symbols */'
+ $(Q)set -o pipefail ; $(NM) $$< \
+ | sed -n 's/^ *0*\(0[0-9A-Fa-f]*\) *A *_cmetric2def_\([A-Za-z_0-9]*\) */#define \2 0x\1/p' \
+ | sort >>$$@
+endef
+
+# Syntax: $(call PROGRAM_template,<dir>,<executable-name>,<link-variant>)
+define PROGRAM_template
+$(1)_OBJS += $$(filter %.o,$$($(1)_SOURCES:%.c=%.o))
+$(1)_OBJS += $$(filter %.o,$$($(1)_SOURCES:%.cc=%.o))
+$(1)_OBJS += $$(filter %.o,$$($(1)_SOURCES:%.cxx=%.o))
+$(1)_OBJS += $$(filter %.o,$$($(1)_SOURCES:%.S=%.o))
+$(1)_OBJS += $$($(1)_EMBEDTARFILES:%=%_tarfile.o)
+$(1)_OBJS := $$(sort $$($(1)_OBJS))
+
+USER_OBJS += $$($(1)_OBJS)
+USER_SOURCES += $$($(1)_SOURCES)
+USER_EMBEDTARFILES += $$($(1)_EMBEDTARFILES)
+
+$(2)/$(1): $(USER_LIB_DIR)/timestamp
+
+$(2)/$(1): $$($(1)_OBJS)
+ @$(QUIET_CMD_ECHO) " LINK $$@"
+ $(Q) $$(shell if [ -z "$$(filter %.cc,$$($(1)_SOURCES))" ] ; \
+ then echo $$(CC) $$(CPPFLAGS) $$(AM_CPPFLAGS) $$(AM_CFLAGS) $$(CFLAGS) ; \
+ else echo $$(CXX) $$(CPPFLAGS) $$(AM_CPPFLAGS) $$(AM_CXXFLAGS) $$(CXXFLAGS) ; fi) \
+ $$(AM_LDFLAGS) $$(LDFLAGS) $$($(1)_OBJS) $$(LOADLIBES) $$($(1)_LIBS:%=-l%) \
+ -o $(2)/$(1)
+#@echo "$(2)/$(1): \\" >$(USER_OBJS_DIR)/$(1).exe.d
+#@sed -n -e 's/^LOAD \(.*\)$$$$/ \1 \\/p' $(USER_OBJS_DIR)/$(1).exe.map >>$(USER_OBJS_DIR)/$(1).exe.d
+#@echo >>$(USER_OBJS_DIR)/$(1).exe.d
+#-Wl,-Map,$(USER_OBJS_DIR)/$(1).exe.map
+endef
+
+
+
+# Syntax: $(call LIBRARY_template,<library-name>)
+define LIBRARY_template
+$(1)_OBJS += $$(filter %.o,$$($(1)_SOURCES:%.c=%.o))
+$(1)_OBJS += $$(filter %.o,$$($(1)_SOURCES:%.cc=%.o))
+$(1)_OBJS += $$(filter %.o,$$($(1)_SOURCES:%.cxx=%.o))
+$(1)_OBJS += $$(filter %.o,$$($(1)_SOURCES:%.S=%.o))
+$(1)_OBJS += $$($(1)_EMBEDTARFILES:%=%_tarfile.o)
+$(1)_OBJS := $$(sort $$($(1)_OBJS))
+
+USER_OBJS += $$($(1)_OBJS)
+USER_SOURCES += $$($(1)_SOURCES)
+USER_EMBEDTARFILES += $$($(1)_EMBEDTARFILES)
+
+$(USER_LIB_DIR)/lib$(1).a: $$($(1)_OBJS)
+ @$(QUIET_CMD_ECHO) " AR $$@"
+ $(Q) $(AR) rcs $$@ $$^
+ @touch $(USER_LIB_DIR)/timestamp
+endef
+
+
+
+# Syntax: $(call SOLIB_template,<library-name>)
+define SOLIB_template
+$(1)_OBJSLO += $$(filter %.lo,$$($(1)_SOURCES:%.c=%.lo))
+$(1)_OBJSLO += $$(filter %.lo,$$($(1)_SOURCES:%.cc=%.lo))
+$(1)_OBJSLO += $$(filter %.lo,$$($(1)_SOURCES:%.cxx=%.lo))
+$(1)_OBJSLO += $$(filter %.lo,$$($(1)_SOURCES:%.S=%.lo))
+$(1)_OBJS += $$($(1)_EMBEDTARFILES:%=%_tarfile.o)
+$(1)_OBJSLO := $$(sort $$($(1)_OBJSLO))
+
+SOLIB_OBJS += $$($(1)_OBJSLO)
+SOLIB_SOURCES += $$($(1)_SOURCES)
+USER_EMBEDTARFILES += $$($(1)_EMBEDTARFILES)
+
+$(USER_LIB_DIR)/lib$(1).so: $$($(1)_OBJSLO)
+ @$(QUIET_CMD_ECHO) " LINK $$@"
+ $(Q) $(LD) --shared --soname=lib$(1).so -o $$@ $$^
+endef
+
+
+
+library-pass-local: $(lib_LIBRARIES:%=$(USER_LIB_DIR)/lib%.a) $(shared_LIBRARIES:%=$(USER_LIB_DIR)/lib%.so)
+
+binary-pass-local: $(bin_PROGRAMS:%=$(USER_BIN_DIR)/%)
+
+utils-pass-local: $(utils_PROGRAMS:%=$(USER_UTILS_DIR)/%)
+
+# Special rules for CMETRIC generated headers
+
+$(foreach cmetrh,$(cmetric_include_HEADERS),$(eval $(call COMPILE_c_o_template,\
+ $(SOURCES_DIR)/$($(basename $(notdir $(cmetrh)))_CMETRIC_SOURCES),\
+ $($(basename $(notdir $(cmetrh)))_CMETRIC_SOURCES:%.c=%.o),)))
+$(foreach cmetrh,$(cmetric_include_HEADERS),$(eval $(call CMETRIC_o_h_template,\
+ $($(basename $(notdir $(cmetrh)))_CMETRIC_SOURCES:%.c=%.o),\
+ $(cmetrh:%=$(USER_INCLUDE_DIR)/%))))
+
+GEN_HEADERS+=$(cmetric_include_HEADERS:%=$(USER_INCLUDE_DIR)/%)
+
+# Generate rules for compilation of programs and libraries
+
+$(foreach prog,$(utils_PROGRAMS),$(eval $(call PROGRAM_template,$(prog),$(USER_UTILS_DIR))))
+
+$(foreach prog,$(bin_PROGRAMS),$(eval $(call PROGRAM_template,$(prog),$(USER_BIN_DIR))))
+
+$(foreach lib,$(lib_LIBRARIES),$(eval $(call LIBRARY_template,$(lib))))
+
+$(foreach lib,$(shared_LIBRARIES),$(eval $(call SOLIB_template,$(lib))))
+
+-include $(USER_OBJS_DIR)/*.d
+
+endif
+
+#=====================================================================
+
+
+library-pass binary-pass utils-pass:
+ +@$(foreach dir, $(SUBDIRS), $(call mkdir_def,$(USER_OBJS_DIR)/$(dir)) ; \
+ $(MAKE) SOURCES_DIR=$(SOURCES_DIR)/$(dir) \
+ RELATIVE_DIR=$(RELATIVE_DIR)/$(dir) -C $(USER_OBJS_DIR)/$(dir) \
+ -f $(SOURCES_DIR)/$(dir)/Makefile $@ || exit 1 ;)
+ +@$(call mkdir_def,$(USER_OBJS_DIR))
+ @$(MAKE) --no-print-directory -C $(USER_OBJS_DIR) \
+ -f $(SOURCES_DIR)/Makefile USER_RULE_TEMPLATES=y $(@:%=%-local)
+
+
+dep clean install check-dir include-pass default-config-pass:
+ +@$(foreach dir, $(SUBDIRS), $(call mkdir_def,$(USER_OBJS_DIR)/$(dir)) ; \
+ $(MAKE) SOURCES_DIR=$(SOURCES_DIR)/$(dir) \
+ RELATIVE_DIR=$(RELATIVE_DIR)/$(dir) -C $(USER_OBJS_DIR)/$(dir) \
+ -f $(SOURCES_DIR)/$(dir)/Makefile $@ || exit 1 ;)
+ +@$(call mkdir_def,$(USER_OBJS_DIR))
+ @$(MAKE) --no-print-directory -C $(USER_OBJS_DIR) \
+ -f $(SOURCES_DIR)/Makefile $(@:%=%-local)
+
+
+dep-local:
+
+check-dir-local:
+ @$(call mkdir_def,$(USER_OBJS_DIR))
+ @$(call mkdir_def,$(USER_INCLUDE_DIR))
+ @$(call mkdir_def,$(USER_LIB_DIR))
+ @$(call mkdir_def,$(USER_BIN_DIR))
+ @$(call mkdir_def,$(USER_UTILS_DIR))
+
+install-local:
+
+default-config:
+ @echo "# Start of OMK config file" > "$(CONFIG_FILE)-default"
+ @echo "# This file should not be altered manually" >> "$(CONFIG_FILE)-default"
+ @echo "# Overrides should be stored in file $(notdir $(CONFIG_FILE))" >> "$(CONFIG_FILE)-default"
+ @echo >> "$(CONFIG_FILE)-default"
+ @$(MAKE) --no-print-directory -C $(MAKERULES_DIR) \
+ RELATIVE_DIR="" SOURCES_DIR=$(MAKERULES_DIR) \
+ -f $(MAKERULES_DIR)/Makefile default-config-pass
+
+default-config-pass-local:
+ @echo Default config for $(RELATIVE_DIR)
+ @echo "# Config for $(RELATIVE_DIR)" >> "$(CONFIG_FILE)-default"
+ @$(foreach x, $(default_CONFIG), echo $(x) | \
+ sed -e 's/^.*=x$$/#\0/' >> "$(CONFIG_FILE)-default" ; )
+
+include-pass-local:
+ @$(call mkdir_def,$(USER_INCLUDE_DIR))
+ @$(foreach f, $(include_HEADERS), cmp --quiet $(SOURCES_DIR)/$(f) $(USER_INCLUDE_DIR)/$(notdir $(f)) \
+ || cp $(CPHEADER_FLAGS) $(SOURCES_DIR)/$(f) $(USER_INCLUDE_DIR)/$(notdir $(f)) || exit 1 ; )
+ @$(foreach f, $(nobase_include_HEADERS), cmp --quiet $(SOURCES_DIR)/$(f) $(USER_INCLUDE_DIR)/$(f) \
+ || ( mkdir -p $(USER_INCLUDE_DIR)/$(dir $(f)) && cp $(CPHEADER_FLAGS) $(SOURCES_DIR)/$(f) $(USER_INCLUDE_DIR)/$(f) ) || exit 1 ; )
+ @$(foreach f, $(renamed_include_HEADERS), \
+ srcfname=`echo '$(f)' | sed -e 's/^\(.*\)->.*$$/\1/'` ; destfname=`echo '$(f)' | sed -e 's/^.*->\(.*\)$$/\1/'` ; \
+ cmp --quiet $(SOURCES_DIR)/$${srcfname} $(USER_INCLUDE_DIR)/$${destfname} \
+ || ( mkdir -p `dirname $(USER_INCLUDE_DIR)/$${destfname}` && cp $(CPHEADER_FLAGS) $(SOURCES_DIR)/$${srcfname} $(USER_INCLUDE_DIR)/$${destfname} ) || exit 1 ; )
+
+ifdef USER_RULE_TEMPLATES
+
+# User-space static libraries and applications object files
+
+USER_SOURCES := $(sort $(USER_SOURCES))
+
+#$(warning USER_SOURCES = $(USER_SOURCES))
+
+$(foreach src,$(filter %.c,$(USER_SOURCES)),$(eval $(call COMPILE_c_o_template,$(SOURCES_DIR)/$(src),$(src:%.c=%.o),)))
+
+$(foreach src,$(filter %.cc,$(USER_SOURCES)),$(eval $(call COMPILE_cc_o_template,$(SOURCES_DIR)/$(src),$(src:%.cc=%.o),)))
+
+$(foreach src,$(filter %.cxx,$(USER_SOURCES)),$(eval $(call COMPILE_cc_o_template,$(SOURCES_DIR)/$(src),$(src:%.cxx=%.o),)))
+
+$(foreach src,$(filter %.S,$(USER_SOURCES)),$(eval $(call COMPILE_S_o_template,$(SOURCES_DIR)/$(src),$(src:%.S=%.o),)))
+
+# User-space shared libraries object files
+
+SOLIB_SOURCES := $(sort $(SOLIB_SOURCES))
+
+#$(warning SOLIB_SOURCES = $(SOLIB_SOURCES))
+
+$(foreach src,$(filter %.c,$(SOLIB_SOURCES)),$(eval $(call COMPILE_c_o_template,$(SOURCES_DIR)/$(src),$(src:%.c=%.lo),$(SOLIB_PICFLAGS))))
+
+$(foreach src,$(filter %.cc,$(SOLIB_SOURCES)),$(eval $(call COMPILE_cc_o_template,$(SOURCES_DIR)/$(src),$(src:%.cc=%.lo),$(SOLIB_PICFLAGS))))
+
+$(foreach src,$(filter %.cxx,$(SOLIB_SOURCES)),$(eval $(call COMPILE_cc_o_template,$(SOURCES_DIR)/$(src),$(src:%.cxx=%.lo),$(SOLIB_PICFLAGS))))
+
+$(foreach src,$(filter %.S,$(SOLIB_SOURCES)),$(eval $(call COMPILE_S_o_template,$(SOURCES_DIR)/$(src),$(src:%.S=%.lo),$(SOLIB_PICFLAGS))))
+
+$(foreach tarfile,$(USER_EMBEDTARFILES),$(eval $(call TARFILE_template,$(tarfile),$(tarfile)_tarfile,$(SOURCES_DIR)/$(tarfile))))
+
+endif
+
+
+clean-local:
+ @echo Cleaning in $(USER_OBJS_DIR)
+ @rm -f $(USER_OBJS_DIR)/*.o $(USER_OBJS_DIR)/*.lo \
+ $(USER_OBJS_DIR)/*.d \
+ $(USER_OBJS_DIR)/*.map \
+ $(LOCAL_CONFIG_H:%=$(USER_OBJS_DIR)/%) \
+ $(cmetric_include_HEADERS:%=$(USER_INCLUDE_DIR)/%) \
+ $(tar_EMBEDFILES:%=$(USER_OBJS_DIR)/%_tarfile)
+
+
--- /dev/null
+Description of OCERA Make System for CAN Components (OMK)
+=========================================================
+
+Important notice:
+This make system uses features found in recent versions of GNU Make
+program. If you encounter problems with package building,
+check, that you use correct version of Make program.
+The Make older than version 3.80, could not be used.
+Even Make version 3.80 has annoying bug which causes
+building fail with misleading message "virtual memory exhausted".
+Please, upgrade to last version of Make (3.81beta1).
+You can take it from GNU CVS or from our local copy
+
+http://cmp.felk.cvut.cz/~pisa/can/make-3.81beta1.tar.gz
+
+
+There is list of features which we want to solve with our makesystem:
+ - central Makefile.rules for most of subcomponents and components
+ (our CAN framework includes more libraries common with our other projects,
+ we need to separate some utility libraries etc.)
+ - the rules in more spread Makefiles are way to the hell,
+ (update for different kernel, RT-Linux etc would be nightmare in other case)
+ - make system should allow to freely move with cross-dependant components
+ without need to update users of moved component
+ (I hate somethink like -I../../sched/rtlshwq/include in CAN makefiles
+ for example. Component could be renamed to different name or version
+ could be added to name and all Makefiles in CAN would require to
+ be updated)
+ - make system should be able to compile mutually cross-dependant libraries
+ and should ensure, that change in one component sources or headers
+ would result in relink or rebuild in components linked against that library
+ or including modified header file
+ - make system has to enable compilation out of OCERA full source tree
+ (we would lost many users of particular components in other case)
+ - compile should be able to do all above work without need to install
+ any files before successful finish of build.
+ - because we use some libraries for RT-Linux build and userspace
+ build, we need to solve how to compile from same sources to both targets.
+ - the build system should allow to call make for particular source
+ subdirectory. Time of recursive make through all subdirectories is
+ unacceptable.
+ - make system should enable to build out of sources tree
+ (else clean or working with CVS sandbox gets fussy and simultaneous
+ multiple targets gets problematic)
+ - it would be good, if there would be possibility to make from read-only
+ media sources
+ - make system should store results of build in some separate directory
+ structure to simple install and testing
+ - Makefiles in sources directories should be simple
+
+There is probably only one alternative fully supporting above requirements
+and it is GNU Autoheader...Automake...Autoconf... system.
+But it is complicated and requires big amount of support files.
+It would be acceptable if it could be easily used for OCERA framework.
+But there are important show stopper for that system:
+ - it would require deep revision of all OCERA CVS contents and agreement
+ on this would be problematic
+ - this system is not well prepared for dual compilation for Linux
+ and RT-Linux sub-targets. It would mean many changes in default
+ autoconf setup to support this. Probably simplest way would be
+ to rebuild GCC tool chain for something like i586-elf-rtlinux.
+ This would require even more space for OCERA development.
+
+The problem calls for same solution, which would have minimal impact
+on other components and would be elegant and would be maintainable
+and small, because our main goal is components development and not
+make systems development.
+
+There is result of our trial. It is OMK make system.
+The Makefile and Makefile.omk files should be in all source
+directories. Common Makefile.rules file is required in the toplevel
+sources directory. Alternatively this file could be moved
+to link tree pointing into readonly media or can be anywhere
+else if MAKERULES_DIR and SOURCES_DIR are specified.
+
+Syntax of Makefile.omk files is for usual cases compatible
+to Automake's Makefile.am descriptions. There are specific targets
+for RT-Linux and Linux kernel related stuff
+
+Makefile.omk user defined variables
+# SUBDIRS .. list of subdirectories intended for make from actual directory
+# lib_LIBRARIES .. list of the user-space libraries
+# shared_LIBRARIES .. list of the user-space shared libraries
+# kernel_LIBRARIES .. list of the kernel-space libraries
+# rtlinux_LIBRARIES.. list of the RT-Linux kernel-space libraries
+# include_HEADERS .. list of the user-space header files
+# nobase_include_HEADERS .. headers copied even with directory part
+# kernel_HEADERS .. list of the kernel-space header files
+# rtlinux_HEADERS .. list of the RT-Linux kernel-space header files
+# bin_PROGRAMS .. list of the require binary programs
+# utils_PROGRAMS .. list of the development utility programs
+# kernel_MODULES .. list of the kernel side modules/applications
+# rtlinux_MODULES .. list of RT-Linux the kernel side modules/applications
+# xxx_SOURCES .. list of specific target sources
+# INCLUDES .. additional include directories and defines for user-space
+# kernel_INCLUDES .. additional include directories and defines for kernel-space
+# rtlinux_INCLUDES .. additional include directories and defines for RT-Linux
+# default_CONFIG .. list of default config assignments CONFIG_XXX=y/n ...
+
+The Makefile is same for all sources directories and is only 14 lines long.
+It is there only for convenience reasons to enable call "make" from
+local directory. It contains code which locates Makefile.rules in actual
+or any parent directory. With standard BASH environment it works such way,
+that if you get into sources directory over symbolic links, it is able to
+unwind yours steps back => you can make links to readonly media component
+directories, copy Makefile.rules, Makefile and toplevel Makefile.omk,
+adjust Makefile.omk to contain only required components and then call
+make in top or even directories after crossing from your tree
+to readonly media.
+
+The system compiles all files out of source directories.
+The actual version of system is adapted even for OCERA tree mode
+if OCERA_DIR variable is defined in Makefile.rules
+
+There are next predefined directory name components,
+which can be adapted if required
+
+BUILD_DIR_NAME = _build
+ prefix of directory, where temporary build files are stored
+COMPILED_DIR_NAME = _compiled
+ prefix of directory, where final compilation results are stored
+GROUP_DIR_NAME = yyy
+ this is used for separation of build sub-trees in OCERA environment
+ where more Makefile.rules is spread in the tree
+
+Next directories are used:
+
+KERN_BUILD_DIR := $(MAKERULES_DIR)/$(BUILD_DIR_NAME)/kern
+ directory to store intermediate files for kernel-space targets
+USER_BUILD_DIR := $(MAKERULES_DIR)/$(BUILD_DIR_NAME)/user
+ directory to store intermediate files for user-space targets
+
+USER_INCLUDE_DIR := $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/include
+ directory to store exported include files which should be installed later
+ on user-space include path
+USER_LIB_DIR := $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/lib
+ same for user-pace libraries
+USER_UTILS_DIR := $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/bin-utils
+ utilities for testing, which would not probably be installed
+USER_BIN_DIR := $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/bin
+ binaries, which should go into directory on standard system PATH
+ (/usr/local/bin, /usr/bin or $(prefix)/bin)
+
+KERN_INCLUDE_DIR := $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/include-kern
+ directory to store exported include files which should be installed later
+ on kernel-space include path
+KERN_LIB_DIR := $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/lib-kern
+ same for kernel-pace libraries
+KERN_MODULES_DIR := $(MAKERULES_DIR)/$(COMPILED_DIR_NAME)/modules
+ builded modules for Linux kernel or RT-Linux system
+
+There is more recursive passes through directories to enable
+mutual dependant libraries and binaries to compile.
+Next passes are defined
+
+default-config .. generates config.omk-default or xxx-default configuration file
+check-dir .. checks and creates required build directories
+include-pass .. copyes header files to USER_INCLUDE_DIR and KERN_INCLUDE_DIR
+library-pass .. builds objects in USER_BUILD_DIR/<relative path> and creates
+ libraries in USER_LIB_DIR
+binary-pass and utils-pass .. links respective binaries
+ in USER_{BIN,UTILS}_DIR directory. If some object file is missing
+ it compiles it in USER_BUILD_DIR/<relative path>
+kernel-lib-pass .. builds libraries for kernel space targets
+kernel-pass .. builds kernel modules
+
+The amount of passes is relatively high and consumes some time.
+But only other way to support all required features is to assemble
+one big toplevel Makefile, which would contain all components
+and targets cross-dependencies.
+
+Drawbacks of designed make system
+ - the system is not as fast as we would like
+ - it lacks Autoconf and configure extensive support for many systems
+ from UNIX to DOS and WINDOWS
+ - it does not contain support for checking existence of target libraries
+ and functionalities as GNU Autoconf
+ - it is heavily dependant on GNU MAKE program. But it would not be big
+ problem, because even many commercial applications distribute GNU
+ MAKE with them to be able to work in non-friendly systems
+ - the key drawback is dependence on recent MAKE version 3.80 and better
+ and even version 3.80 of MAKE has important bug, which has been
+ corrected in newer sources
+
+The last point is critical. I have not noticed it first, because
+I use Slackware-9.2 and it contains latest released version
+of MAKE (version 3.80).
+The problem appears when I have tried to build bigger libraries.
+There is bug in version 3.80, which results in misleading
+error "Virtual memory exhausted". It is known bug with ID 1517
+
+ * long prerequisite inside eval(call()) => vm exhausted, Paul D. Smith
+
+I have optimized some rules to not push memory to the edge,
+but there could be still issues with 3.80 version.
+
+I have downloaded latest MAKE CVS sources. The compilation required
+separate lookup and download for .po files and full Autoheader... cycle.
+I have put together package similar to release. Only ./configure --prefix=...
+and make is required. CVS sources contains version 3.81beta1.
+You can download prepared sources archive from
+
+ http://cmp.felk.cvut.cz/~pisa/can/make-3.81beta1.tar.gz
+
+The archive contains even "make" binary build by me, which should work
+on other Linux distributions as well.
+Older version of MAKE (3.79.x released about year 2000) found
+on Mandrake and RedHat are not sufficient and do not support eval feature.
+I do not expect, that Debian would be more up-to-date or contain fixes
+to MAKE vm exhausted bug.
+
+The local CTU archive with our CAN components prepared for inclusion
+into OCERA SF CVS could be found in my "can" directory
+
+ http://cmp.felk.cvut.cz/~pisa/can/ocera-can-031212.tar.gz
+
+The code should build for user-space with new make on most of Linux distros
+when make is updated.
+
+If you want to test compile for RT-Linux targets, line
+
+#RTL_DIR := /home/cvs/ocera/ocera-build/kernel/rtlinux
+
+in "Makefile.rules" has to be activated and updated
+to point RT-Linux directory containing "rtl.mk".
+There is only one library ("ulutrtl") and test utility compiled for RT-Linux
+("can/utils/ulut/ul_rtlchk.c").
+
+The next line ,if enabled, controls compilation in OCERA project tree
+
+#OCERA_DIR := $(shell ( cd -L $(MAKERULES_DIR)/../../.. ; pwd -L ) )
+
+The LinCAN driver has been updated to compile out of source directories.
+
+Please, check, if you could compile CAN package and help us with integration
+into OCERA SF CVS. Send your comments and objections.
+
+The OMK system has been adapted to support actual OCERA configuration process.
+I am not happy with ocera.mk mix of defines and poor two or three rules,
+but OMK is able to overcome that.
+
+The OMK system has integrated rules (default-config) to build default configuration
+file. The file is named "config.omk-default" for the stand-alone compilation.
+The name corresponds to OCERA config + "-default" if OCERA_DIR is defined.
+This file contains statements from all default_CONFIG lines in all Makefile.omk.
+The file should be used for building of own "config.omk" file, or as list
+for all options if Kconfig is used.
+
--- /dev/null
+# Generic directory or leaf node makefile for OCERA make framework
+
+ifndef MAKERULES_DIR
+MAKERULES_DIR := $(shell ( old_pwd="" ; while [ ! -e Makefile.rules ] ; do if [ "$$old_pwd" == `pwd` ] ; then exit 1 ; else old_pwd=`pwd` ; cd -L .. 2>/dev/null ; fi ; done ; pwd ) )
+endif
+
+ifeq ($(MAKERULES_DIR),)
+all : default
+.DEFAULT::
+ @echo -e "\nThe Makefile.rules has not been found in this or partent directory\n"
+else
+include $(MAKERULES_DIR)/Makefile.rules
+endif
+
--- /dev/null
+default_CONFIG += CONFIG_OC_BUILD4RTEMS=y
+default_CONFIG += CONFIG_OC_GDBSTUB=n
+
+bin_PROGRAMS = appfoo
+
+#lib_LIBRARIES =
+
+#include_HEADERS =
+
+appfoo_SOURCES += init.c task_1.c
+
+#appfoo_EMBEDTARFILES = rootfs
+
+lib_LOADLIBES += bar
+
--- /dev/null
+#ifndef _APP_DEF_H
+#define _APP_DEF_H
+
+#ifndef COND_EXTERN
+ #ifdef CONFIGURE_INIT
+ #define COND_EXTERN
+ #else
+ #define COND_EXTERN extern
+ #endif
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+COND_EXTERN rtems_id Task_1_id; /* Task 1 id */
+COND_EXTERN rtems_name Task_1_name; /* Task 1 name */
+
+rtems_task Task_1(
+ rtems_task_argument argument
+);
+
+void bad_rtems_status(rtems_status_code status, int fail_level, const char *text);
+
+static inline
+void check_rtems_status(rtems_status_code status, int fail_level, const char *text)
+{
+ if(!rtems_is_status_successful(status))
+ bad_rtems_status(status, fail_level, text);
+}
+
+#define TASK_1_PRIORITY 30
+#define SHELL_TASK_PRIORITY 50
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*_APP_DEF_H*/
--- /dev/null
+/* Init
+ *
+ * This routine is the initialization task for this test program.
+ * It is called from init_exec and has the responsibility for creating
+ * and starting the tasks that make up the test. If the time of day
+ * clock is required for the test, it should also be set to a known
+ * value by this function.
+ *
+ * Input parameters: NONE
+ *
+ * Output parameters: NONE
+ *
+ * COPYRIGHT (c) 1989-1999.
+ * On-Line Applications Research Corporation (OAR).
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.com/license/LICENSE.
+ *
+ * $Id: init.c,v 1.12.4.1 2003/09/04 18:46:30 joel Exp $
+ */
+
+#define CONFIGURE_INIT
+#include <system_def.h>
+#include "system.h"
+#include "app_def.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <rtems/error.h>
+#include <rtems/monitor.h>
+#include <rtems/shell.h>
+
+#define BUILD_VERSION_STRING(major,minor,patch) \
+ __XSTRING(major) "." __XSTRING(minor) "." __XSTRING(patch)
+
+void
+bad_rtems_status(rtems_status_code status, int fail_level, const char *text)
+{
+ printf("ERROR: %s status %s", text, rtems_status_text(status));
+ status = rtems_task_delete( RTEMS_SELF );
+}
+
+int testcmd_forshell(int argc, char **argv)
+{
+ int i;
+ printf("Command %s called\n",argv[0]);
+ for(i=1;i<argc;i++)
+ if(argv[i])
+ printf("%s",argv[i]);
+ printf("\n");
+ return 0;
+}
+
+rtems_task Init(
+ rtems_task_argument ignored
+)
+{
+ rtems_status_code status;
+
+ printf( "\n\nRTEMS v "
+ BUILD_VERSION_STRING(__RTEMS_MAJOR__ ,__RTEMS_MINOR__ ,__RTEMS_REVISION__)
+ "\n");
+
+ rtems_monitor_init(RTEMS_MONITOR_SUSPEND|RTEMS_MONITOR_GLOBAL);
+ /*rtems_capture_cli_init (0);*/
+
+ printf( "Starting application " SW_VER_ID " v "
+ BUILD_VERSION_STRING(SW_VER_MAJOR,SW_VER_MINOR,SW_VER_PATCH)
+ "\n" );
+
+ Task_1_name = rtems_build_name( 'T', 'S', 'K', '1' );
+
+ status = rtems_task_create(
+ Task_1_name,
+ TASK_1_PRIORITY,
+ RTEMS_MINIMUM_STACK_SIZE+0x10000,
+ RTEMS_DEFAULT_MODES /*& ~(RTEMS_TIMESLICE_MASK) | RTEMS_TIMESLICE*/,
+ RTEMS_DEFAULT_ATTRIBUTES,
+ &Task_1_id
+ );
+ check_rtems_status(status, 0, "rtems_task_create of Task_1");
+
+ status = rtems_task_start( Task_1_id, Task_1, 0 );
+ check_rtems_status(status, 0, "rtems_task_start of Task_1\n");
+
+ shell_init("SHLL",RTEMS_MINIMUM_STACK_SIZE+0x1000,
+ SHELL_TASK_PRIORITY,"/dev/console",B19200 | CS8, 0);
+
+ shell_add_cmd("testcmd", "app",
+ "test command for shell",
+ testcmd_forshell);
+
+ //rtems_monitor_wakeup();
+
+ status = rtems_task_delete( RTEMS_SELF );
+
+ printf( "*** END OF TEST2 ***\n" );
+ exit( 0 );
+}
--- /dev/null
+/* system.h
+ *
+ * This include file contains information that is included in every
+ * function in the test set.
+ *
+ * COPYRIGHT (c) 1989-1999.
+ * On-Line Applications Research Corporation (OAR).
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.com/license/LICENSE.
+ *
+ * $Id: system.h,v 1.13.6.1 2003/09/04 18:46:30 joel Exp $
+ */
+
+#include <rtems.h>
+
+/* functions */
+
+rtems_task Init(
+ rtems_task_argument argument
+);
+
+/* configuration information */
+
+#include <bsp.h> /* for device driver prototypes */
+
+#define CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
+#define CONFIGURE_TEST_NEEDS_CLOCK_DRIVER
+
+#define TICKS_PER_SECOND 1000
+
+#define CONFIGURE_MAXIMUM_TIMERS 32
+#define CONFIGURE_MAXIMUM_MESSAGE_QUEUES 32
+#define CONFIGURE_MAXIMUM_SEMAPHORES 32
+#define CONFIGURE_MAXIMUM_TASKS 32
+#define CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS 32
+#define CONFIGURE_MAXIMUM_DRIVERS (CONFIGURE_NUMBER_OF_DRIVERS+10)
+
+#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
+
+
+#define CONFIGURE_USE_IMFS_AS_BASE_FILESYSTEM
+/*#define CONFIGURE_USE_MINIIMFS_AS_BASE_FILESYSTEM*/
+
+#define CONFIGURE_MICROSECONDS_PER_TICK 1000
+
+#define CONFIGURE_INIT_TASK_STACK_SIZE (10*1024)
+#define CONFIGURE_INIT_TASK_PRIORITY 120
+#define CONFIGURE_INIT_TASK_INITIAL_MODES (RTEMS_PREEMPT | \
+ RTEMS_NO_TIMESLICE | \
+ RTEMS_NO_ASR | \
+ RTEMS_INTERRUPT_LEVEL(0))
+
+#include <rtems/confdefs.h>
+
+/* end of include file */
--- /dev/null
+#include <system_def.h>
+#include "system.h"
+#include "app_def.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <rtems/untar.h>
+#include <rtems/error.h>
+#include <rtems/mw_uid.h>
+#include <errno.h>
+
+
+rtems_task Task_1(
+ rtems_task_argument argument
+)
+{
+ rtems_status_code status;
+ printf("*** Starting up Task_1 ***\n");
+
+ while(1){
+ printf("Task_1 woken\n");
+ status = rtems_task_wake_after( TICKS_PER_SECOND );
+ check_rtems_status( status, 0, "rtems_task_wake_after" );
+ }
+}
+
--- /dev/null
+# EC555 BSP for Wuerz-elektronik EC555 board
+# This file should be symlinked as config.target into project
+# Makefile.rules directory
+RTEMS_MAKEFILE_PATH=/opt/rtems/powerpc-rtems/ec555
--- /dev/null
+# Generic directory or leaf node makefile for OCERA make framework
+
+ifndef MAKERULES_DIR
+MAKERULES_DIR := $(shell ( old_pwd="" ; while [ ! -e Makefile.rules ] ; do if [ "$$old_pwd" == `pwd` ] ; then exit 1 ; else old_pwd=`pwd` ; cd -L .. 2>/dev/null ; fi ; done ; pwd ) )
+endif
+
+ifeq ($(MAKERULES_DIR),)
+all : default
+.DEFAULT::
+ @echo -e "\nThe Makefile.rules has not been found in this or partent directory\n"
+else
+include $(MAKERULES_DIR)/Makefile.rules
+endif
+
--- /dev/null
+lib_LIBRARIES = bar
+
+include_HEADERS = bar.h
+
+bar_SOURCES = function1.c function2.c
--- /dev/null
+#ifndef _BAR_H_
+#define _BAR_H_
+
+int function1(int);
+int function2(char *);
+
+#endif /*_BAR_H_*/
--- /dev/null
+#include <bar.h>
+
+int function1(int a)
+{
+ return a*a;
+}
--- /dev/null
+#include <string.h>
+#include <bar.h>
+
+int function2(char *s)
+{
+ return strlen(s);
+}
--- /dev/null
+# Generic directory or leaf node makefile for OCERA make framework
+
+ifndef MAKERULES_DIR
+MAKERULES_DIR := $(shell ( old_pwd="" ; while [ ! -e Makefile.rules ] ; do if [ "$$old_pwd" == `pwd` ] ; then exit 1 ; else old_pwd=`pwd` ; cd -L .. 2>/dev/null ; fi ; done ; pwd ) )
+endif
+
+ifeq ($(MAKERULES_DIR),)
+all : default
+.DEFAULT::
+ @echo -e "\nThe Makefile.rules has not been found in this or partent directory\n"
+else
+include $(MAKERULES_DIR)/Makefile.rules
+endif
+
--- /dev/null
+#SUBDIRS =
+
+include_HEADERS = system_def.h
--- /dev/null
+#ifndef _SYSTEM_DEF_H_
+#define _SYSTEM_DEF_H_
+
+#include <inttypes.h>
+
+#define VER_CODE(major,minor,patch) (major*0x10000+minor*0x100+patch)
+/* Software version */
+#define SW_VER_ID "APPFOO"
+#define SW_VER_MAJOR 0
+#define SW_VER_MINOR 1
+#define SW_VER_PATCH 0
+#define SW_VER_CODE VER_CODE(SW_VER_MAJOR,SW_VER_MINOR,SW_VER_PATCH)
+/* Hardware version */
+#define HW_VER_ID "SOMEBOARD"
+#define HW_VER_MAJOR 0
+#define HW_VER_MINOR 1
+#define HW_VER_PATCH 0
+#define HW_VER_CODE VER_CODE(HW_VER_MAJOR,HW_VER_MINOR,HW_VER_PATCH)
+/* Version of mechanical */
+#define MECH_VER_ID "SOMESTUFF"
+#define MECH_VER_MAJOR 0
+#define MECH_VER_MINOR 1
+#define MECH_VER_PATCH 0
+#define MECH_VER_CODE VER_CODE(MECH_VER_MAJOR,MECH_VER_MINOR,MECH_VER_PATCH)
+
+#endif /* _SYSTEM_DEF_H_ */