# Makefile.rules - OCERA make framework common project rules -*- makefile-gmake -*-
#
-# (C) Copyright 2003 by Pavel Pisa - OCERA team member
-# (C) Copyright 2006 by Michal Sojka - Czech Technical University, FEE, DCE
+# (C) Copyright 2003, 2006, 2007, 2008, 2009 by Pavel Pisa - OCERA team member
+# (C) Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2013, 2015 by Michal Sojka - Czech Technical University, FEE, DCE
#
# Homepage: http://rtime.felk.cvut.cz/omk/
# Version: @git-describe@
# SUBDIRS .. list of subdirectories intended for make from actual directory
# default_CONFIG .. list of default config assignments CONFIG_XXX=y/n ...
-# We need to ensure definition of sources directory first
-ifndef SOURCES_DIR
-# Only shell built-in pwd understands -L
-SOURCES_DIR := $(shell ( pwd -L ) )
-endif
-
# If we are not called by OMK leaf Makefile...
ifndef MAKERULES_DIR
MAKERULES_DIR := $(abspath $(dir $(filter %Makefile.rules,$(MAKEFILE_LIST))))
endif
+# The $(SED4OMK) command for BSD based systems requires -E option to allow
+# extended regular expressions
+
+SED4OMK ?= sed
+ifneq ($(shell ( echo A | $(SED4OMK) -n -e 's/A\|B/y/p' )),y)
+ SED4OMK := $(SED4OMK) -E
+ ifneq ($(shell ( echo A | $(SED4OMK) -n -e 's/A\|B/y/p' )),y)
+ SED4OMK := gsed
+ endif
+ ifneq ($(shell ( echo A | $(SED4OMK) -n -e 's/A\|B/y/p' )),y)
+ SED4OMK := gsed -E
+ endif
+ ifneq ($(shell ( echo A | $(SED4OMK) -n -e 's/A\|B/y/p' )),y)
+ $(error No SED program suitable for OMK found)
+ endif
+endif
+
# OUTPUT_DIR is the place where _compiled, _build and possible other
# files/directories are created. By default is the same as
# $(MAKERULES_DIR).
OUTPUT_DIR := $(MAKERULES_DIR)
endif
-.PHONY: all default check-make-ver omkize
+# We need to ensure definition of sources directory first
+ifndef SOURCES_DIR
+# Only shell built-in pwd understands -L
+SOURCES_DIR := $(shell ( pwd -L ) )
+INVOCATION_DIR := $(SOURCES_DIR:$(OUTPUT_DIR)%=%)
+INVOCATION_DIR := $(INVOCATION_DIR:/%=%)
+INVOCATION_DIR := $(INVOCATION_DIR:\\%=%)
+endif
+
+.PHONY: all default check-make-ver print-hints omkize
ifdef W
ifeq ("$(origin W)", "command line")
endif
ifneq ($(OMK_WHOLE_TREE),1)
-all: check-make-ver default
+all: check-make-ver print-hints default
@echo "Compilation finished"
else
# Run make in the top-level directory
@$(MAKE) -C $(MAKERULES_DIR) OMK_SERIALIZE_INCLUDED=n SOURCES_DIR=$(MAKERULES_DIR) RELATIVE_DIR="" $(MAKECMDGOALS) W=0
endif
-ifdef OMK_TESTSROOT
-# Usage: $(call canttest,<error message>)
-define canttest
- ( echo "$(1)" > $(OUTPUT_DIR)/_canttest; echo "$(1)"; exit 1 )
-endef
-else
-define canttest
- echo "$(1)"
-endef
-endif
+# omk-get-var target allows external scripts/programs to determine the
+# values of OMK variables such as RELATIVE_DIR etc.
+.PHONY: omk-get-var
+omk-get-var:
+ @$(foreach var,$(VAR),echo $(var)=$($(var));)
#=========================
# Include the config file
-# FIXME: I think CONFIG_FILE_OK variable is useless. We have three
-# config files and it is not clearly defined to which file is this
-# variable related.
-ifneq ($(CONFIG_FILE_OK),y)
ifndef CONFIG_FILE
CONFIG_FILE := $(OUTPUT_DIR)/config.omk
endif
-ifneq ($(wildcard $(CONFIG_FILE)-default),)
--include $(CONFIG_FILE)-default
-else
-ifneq ($(MAKECMDGOALS),default-config)
-$(warning Please, run "make default-config" first)
+
+$(CONFIG_FILE)-default:
+ $(MAKE) default-config
+
+ifeq ($(MAKECMDGOALS),default-config)
+export DEFAULT_CONFIG_PASS=1
endif
+
+ifneq ($(DEFAULT_CONFIG_PASS),1)
+include $(CONFIG_FILE)-default
endif
-include $(OUTPUT_DIR)/config.target
ifneq ($(wildcard $(CONFIG_FILE)),)
-include $(CONFIG_FILE)
-CONFIG_FILE_OK = y
endif
-endif #$(CONFIG_FILE_OK)
CONFIG_FILES ?= $(wildcard $(CONFIG_FILE)-default) $(wildcard $(OUTPUT_DIR)/config.target) $(wildcard $(CONFIG_FILE))
-export SOURCES_DIR MAKERULES_DIR RELATIVE_DIR
+export SED4OMK SOURCES_DIR MAKERULES_DIR RELATIVE_DIR INVOCATION_DIR
export CONFIG_FILE CONFIG_FILES OMK_SERIALIZE_INCLUDED OMK_VERBOSE OMK_SILENT
# OMK_SERIALIZE_INCLUDED has to be exported to submakes because passes
# must to be serialized only in the toplevel make.
override RELATIVE_DIR := $(RELATIVE_DIR:/%=%)
override RELATIVE_DIR := $(RELATIVE_DIR:\\%=%)
#$(warning RELATIVE_DIR = "$(RELATIVE_DIR)")
-override BACK2TOP_DIR := $(shell echo $(RELATIVE_DIR)/ | sed -e 's_//_/_g' -e 's_/\./_/_g' -e 's_^\./__g' -e 's_\([^/][^/]*\)_.._g' -e 's_/$$__')
+#override BACK2TOP_DIR := $(shell echo $(RELATIVE_DIR)/ | $(SED4OMK) -e 's_//_/_g' -e 's_/\./_/_g' -e 's_^\./__g' -e 's_\([^/][^/]*\)_.._g' -e 's_/$$__')
#$(warning BACK2TOP_DIR = "$(BACK2TOP_DIR)")
#$(warning SOURCES_DIR = "$(SOURCES_DIR)")
OMK_INCLUDED := 1
endif
+print-hints:
+ @echo 'Use "make V=1" to see the verbose compile lines.'
+
check-make-ver:
- @GOOD_MAKE_VERSION=`echo $(MAKE_VERSION) | sed -n -e 's/^[4-9]\..*\|^3\.9[0-9].*\|^3\.8[1-9].*/y/p'` ; \
+ @GOOD_MAKE_VERSION=`echo $(MAKE_VERSION) | $(SED4OMK) -n -e 's/^[4-9]\..*\|^3\.9[0-9].*\|^3\.8[1-9].*/y/p'` ; \
if [ x$$GOOD_MAKE_VERSION != xy ] ; then \
- echo "Your make program version is too old and does not support OMK system." ; \
+ echo "Your make program version ($(MAKE_VERSION)) is too old and does not support OMK system." ; \
echo "Please update to make program 3.81beta1 or newer." ; exit 1 ; \
fi
pass = $(strip $(1))
+unexport SUBDIRS
+
# Call a pass in a subdirectory
# Usage: $(call omk_pass_subdir_template,<pass name>,<build dir>,<subdir>)
define omk_pass_subdir_template
.PHONY: $(pass)-$(3)-subdir
$(pass)-submakes: $(pass)-$(3)-subdir
+$(pass)-$(3)-subdir: MAKEOVERRIDES:=$(filter-out SUBDIRS=%,$(MAKEOVERRIDES))
$(pass)-$(3)-subdir:
@$(call mkdir_def,$(2)/$(3))
- +@$(MAKE) SOURCES_DIR=$(SOURCES_DIR)/$(3) $(NO_PRINT_DIRECTORY) \
+ +@$(MAKE) --no-builtin-rules SOURCES_DIR=$(SOURCES_DIR)/$(3) $(NO_PRINT_DIRECTORY) \
RELATIVE_DIR=$(RELATIVE_PREFIX)$(3) -C $(2)/$(3) \
-f $(SUBDIR_MAKEFILE) $(pass)-submakes
# In subdirectories we can call submakes directly since passes are
-# already searialized on the toplevel make.
+# already serialized on the toplevel make.
endef
ifdef OMK_TESTSROOT
$(pass):
# Submakes have to be called this way and not as dependecies for pass
# serialization to work
- +@$(MAKE) SOURCES_DIR=$(SOURCES_DIR) $(NO_PRINT_DIRECTORY) \
+ +@$(MAKE) --no-builtin-rules SOURCES_DIR=$(SOURCES_DIR) $(NO_PRINT_DIRECTORY) \
RELATIVE_DIR=$(RELATIVE_DIR) \
-f $(SOURCESDIR_MAKEFILE) $(pass)-submakes
$(pass)-submakes:
$(pass)-this-dir: $(foreach subdir,$(SUBDIRS),$(pass)-$(subdir)-subdir)
+@echo "make[omk]: $(pass) in $(RELATIVE_DIR)"
@$(call mkdir_def,$(2))
- +@$(MAKE) $(NO_PRINT_DIRECTORY) SOURCES_DIR=$(SOURCES_DIR) RELATIVE_DIR=$(RELATIVE_DIR) -C $(2) \
+ +@$(MAKE) --no-builtin-rules $(NO_PRINT_DIRECTORY) SOURCES_DIR=$(SOURCES_DIR) RELATIVE_DIR=$(RELATIVE_DIR) -C $(2) \
-f $(SOURCESDIR_MAKEFILE) $(3) $(check-target) $(1:%=%-local)
+ifneq ($(pass),clean)
$(pass)-local: $($(pass)_HOOKS)
endif
+endif
endef
# =======================
# @echo Default config for $(RELATIVE_DIR)
@echo "# Config for $(RELATIVE_DIR)" >> "$(CONFIG_FILE)-default"
@$(foreach x, $(default_CONFIG), echo '$(x)' | \
- sed -e 's/^[^=]*=x$$/#\0/' >> "$(CONFIG_FILE)-default" ; )
+ $(SED4OMK) -e 's/^[^=]*=x$$/#\0/' >> "$(CONFIG_FILE)-default" ; )
omkize:
fi
$(Q)for i in `find -L . -name Makefile.omk` ; do \
d=`dirname $${i}`; \
- if ! test -f "$${d}/Makefile.rules" && ( ! test -f "$${d}/Makefile" || ! cmp --silent Makefile "$${d}/Makefile" ); then \
+ if ! test -f "$${d}/Makefile.rules" && ! cmp -s Makefile "$${d}/Makefile"; then \
rm -f "$${d}/Makefile"; \
cp -v Makefile "$${d}/Makefile"; \
fi \
projects / omk.git / blobdiff