3 # This program is free software: you can redistribute it and/or modify
4 # it under the terms of the GNU General Public License as published by
5 # the Free Software Foundation, either version 2 of the License, or
6 # (at your option) any later version.
8 # This program is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 # GNU General Public License for more details.
13 # You should have received a copy of the GNU General Public License
14 # along with this program. If not, see <http://www.gnu.org/licenses/>.
18 use warnings (exists $ENV{NOVABOOT_TEST} ? (FATAL => 'all') : ());
19 use Getopt::Long qw(GetOptionsFromString GetOptionsFromArray);
24 use Time::HiRes("usleep");
28 use POSIX qw(:errno_h);
29 use Cwd qw(getcwd abs_path);
35 my $invocation_dir = $ENV{PWD} || getcwd();
37 ## Configuration file handling
39 # Default configuration
40 $CFG::hypervisor = "";
41 $CFG::hypervisor_params = "serial";
42 $CFG::genisoimage = "genisoimage";
43 $CFG::qemu = 'qemu-system-i386 -cpu coreduo -smp 2';
44 $CFG::default_target = 'qemu';
47 "tud" => '--server=erwin.inf.tu-dresden.de:~sojka/boot/novaboot --rsync-flags="--chmod=Dg+s,ug+w,o-w,+rX --rsync-path=\"umask 002 && rsync\"" --grub --grub-prefix=(nd)/tftpboot/sojka/novaboot --grub-preamble="timeout 0" --concat --iprelay=141.76.48.80:2324 --scriptmod=s/\\\\bhostserial\\\\b/hostserialpci/g',
48 "novabox" => '--server=rtime.felk.cvut.cz:/srv/tftp/novaboot --rsync-flags="--chmod=Dg+s,ug+w,o-w,+rX --rsync-path=\"umask 002 && rsync\"" --pulsar --iprelay=147.32.86.92:2324',
49 "localhost" => '--scriptmod=s/console=tty[A-Z0-9,]+// --server=/boot/novaboot/$NAME --grub2 --grub-prefix=/boot/novaboot/$NAME --grub2-prolog=" set root=\'(hd0,msdos1)\'"',
50 "ryu" => '--uboot --uboot-init="mw f0000b00 \${psc_cfg}; sleep 1" --uboot-addr kernel=800000 --uboot-addr ramdisk=b00000 --uboot-addr fdt=7f0000',
51 "ryuglab" => '--target ryu --server=pc-sojkam.felk.cvut.cz:/srv/tftp --remote-cmd="ssh -tt pc-sojkam.felk.cvut.cz \"sterm -d -s 115200 /dev/ttyUSB0\""',
52 "ryulocal" => '--target ryu --dhcp-tftp --serial --reset-cmd="if which dtrrts; then dtrrts $NB_SERIAL 0 1; sleep 0.1; dtrrts $NB_SERIAL 1 1; fi"',
54 chomp(my $nproc = `nproc`);
55 $CFG::scons = "scons -j$nproc";
56 $CFG::make = "make -j$nproc";
63 package CFG; # Put config data into a separate namespace
68 die("ERROR: Failure compiling '$cfg' - $@");
69 } elsif (! defined($rc)) {
70 die("ERROR: Failure reading '$cfg' - $!");
72 die("ERROR: Failure processing '$cfg'");
75 $builddir = File::Spec->rel2abs($CFG::builddir, dirname($cfg)) if defined $CFG::builddir;
76 print STDERR "novaboot: Read $cfg\n";
81 # We don't use $0 here, because it points to the novaboot itself and
82 # not to the novaboot script. The problem with this approach is that
83 # when a script is run as "novaboot <options> <script>" then $ARGV[0]
84 # contains the first option. Hence the -f check.
85 my $dir = File::Spec->rel2abs($ARGV[0] && -f $ARGV[0] ? dirname($ARGV[0]) : '', $invocation_dir);
86 while ((-d $dir || -l $dir ) && $dir ne "/") {
87 push @cfgs, "$dir/.novaboot" if -r "$dir/.novaboot";
88 my @dirs = File::Spec->splitdir($dir);
89 $dir = File::Spec->catdir(@dirs[0..$#dirs-1]);
91 @cfgs = reverse @cfgs;
92 $dir = $ENV{'NOVABOOT_CONFIG_DIR'} || '/etc/novaboot.d';
93 if (opendir(my $dh, $dir)) {
94 my @etccfg = map { "$dir/$_" } grep { /^[-_a-zA-Z0-9]+$/ && -f "$dir/$_" } readdir($dh);
96 @etccfg = sort(@etccfg);
97 @cfgs = ( @etccfg, @cfgs );
100 my $cfg = $ENV{'NOVABOOT_CONFIG'};
101 Getopt::Long::Configure(qw/no_ignore_case pass_through/);
102 GetOptions ("config|c=s" => \$cfg);
103 read_config($_) foreach $cfg or @cfgs;
105 ## Command line handling
108 GetOptions ("target|t=s" => \$explicit_target);
110 my ($amt, @append, $bender, @chainloaders, $concat, $config_name_opt, $dhcp_tftp, $dump_opt, $dump_config, @exiton, @expect_raw, $gen_only, $grub_config, $grub_prefix, $grub_preamble, $grub2_prolog, $grub2_config, $help, $ider, $iprelay, $iso_image, $interactive, $kernel_opt, $make, $man, $no_file_gen, $off_opt, $on_opt, $pulsar, $pulsar_root, $qemu, $qemu_append, $qemu_flags_cmd, $remote_cmd, $remote_expect, $reset_cmd, $rom_prefix, $rsync_flags, @scriptmod, $scons, $serial, $server, $stty, $tftp, $tftp_port, $uboot, %uboot_addr, @uboot_init);
113 $rom_prefix = 'rom://';
114 $stty = 'raw -crtscts -onlcr 115200';
116 my @expect_seen = ();
120 push(@expect_seen, '-re') if $n eq "expect-re";
121 push(@expect_seen, $v);
127 unless (@expect_seen) { die("No --expect before --send"); }
128 my $ret = ($n eq "sendcont") ? exp_continue : 0;
129 unshift(@expect_raw, sub { shift->send(eval("\"$v\"")); $ret; });
130 unshift(@expect_raw, @expect_seen);
137 "append|a=s" => \@append,
138 "bender|b" => \$bender,
139 "build-dir=s" => sub { my ($n, $v) = @_; $builddir = File::Spec->rel2abs($v); },
140 "concat" => \$concat,
141 "chainloader=s" => \@chainloaders,
142 "dhcp-tftp|d" => \$dhcp_tftp,
143 "dump" => \$dump_opt,
144 "dump-config" => \$dump_config,
145 "exiton=s" => \@exiton,
146 "expect=s" => \&handle_expect,
147 "expect-re=s" => \&handle_expect,
148 "expect-raw=s" => sub { my ($n, $v) = @_; unshift(@expect_raw, eval($v)); },
149 "gen-only" => \$gen_only,
150 "grub|g:s" => \$grub_config,
151 "grub-preamble=s"=> \$grub_preamble,
152 "prefix|grub-prefix=s" => \$grub_prefix,
153 "grub2:s" => \$grub2_config,
154 "grub2-prolog=s" => \$grub2_prolog,
156 "iprelay=s" => \$iprelay,
157 "iso:s" => \$iso_image,
158 "kernel|k=s" => \$kernel_opt,
159 "interactive|i" => \$interactive,
160 "name=s" => \$config_name_opt,
161 "make|m:s" => \$make,
162 "no-file-gen" => \$no_file_gen,
165 "pulsar|p:s" => \$pulsar,
166 "pulsar-root=s" => \$pulsar_root,
167 "qemu|Q:s" => \$qemu,
168 "qemu-append=s" => \$qemu_append,
169 "qemu-flags|q=s" => \$qemu_flags_cmd,
170 "remote-cmd=s" => \$remote_cmd,
171 "remote-expect=s"=> \$remote_expect,
172 "reset-cmd=s" => \$reset_cmd,
173 "rsync-flags=s" => \$rsync_flags,
174 "scons:s" => \$scons,
175 "scriptmod=s" => \@scriptmod,
176 "send=s" => \&handle_send,
177 "sendcont=s" => \&handle_send,
178 "serial|s:s" => \$serial,
179 "server:s" => \$server,
180 "strip-rom" => sub { $rom_prefix = ''; },
183 "tftp-port=i" => \$tftp_port,
184 "uboot:s" => \$uboot,
185 "uboot-addr=s" => \%uboot_addr,
186 "uboot-init=s" => \@uboot_init,
191 # First process target options
193 my $t = defined($explicit_target) ? $explicit_target : $CFG::default_target;
195 Getopt::Long::Configure(qw/no_ignore_case pass_through/);
197 exists $CFG::targets{$t} or die("Unknown target '$t' (valid targets are: ".join(", ", sort keys(%CFG::targets)).")");
199 undef $explicit_target;
200 my ($ret, $remaining_args) = GetOptionsFromString ($CFG::targets{$t}, ("target|t=s" => \$explicit_target));
201 if (!$ret) { die "Error parsing target $t option"; }
202 push(@target_expanded, @$remaining_args);
203 $t = $explicit_target;
205 Getopt::Long::Configure(qw/no_ignore_case no_pass_through/);
206 GetOptionsFromArray(\@target_expanded, %opt_spec) or die ("Error in target definition");
209 # Then process other command line options - some of them may override
210 # what was specified by the target
211 GetOptions %opt_spec or die("Error in command line arguments");
212 pod2usage(1) if $help;
213 pod2usage(-exitstatus => 0, -verbose => 2) if $man;
215 ### Dump sanitized configuration (if requested)
219 $Data::Dumper::Indent=1;
220 print "# This file is in perl syntax.\n";
221 foreach my $key(sort(keys(%CFG::))) { # See "Symbol Tables" in perlmod(1)
222 if (defined ${$CFG::{$key}}) { print Data::Dumper->Dump([${$CFG::{$key}}], ["*$key"]); }
223 if ( @{$CFG::{$key}}) { print Data::Dumper->Dump([\@{$CFG::{$key}}], ["*$key"]); }
224 if ( %{$CFG::{$key}}) { print Data::Dumper->Dump([\%{$CFG::{$key}}], ["*$key"]); }
230 ### Sanitize configuration
232 if ($interactive && !-t STDIN) {
233 die("novaboot: Interactive mode not supported when not on terminal");
236 if (defined $config_name_opt && scalar(@ARGV) > 1) { die "You cannot use --name with multiple scripts"; }
239 $iso_image //= ''; # IDE-R needs an ISO image
240 if (!defined $amt) { die "Error: --ider requires --amt"; }
244 if (defined $serial) {
245 $serial ||= "/dev/ttyUSB0";
246 $ENV{NB_SERIAL} = $serial;
248 if (defined $grub_config) { $grub_config ||= "menu.lst"; }
249 if (defined $grub2_config) { $grub2_config ||= "grub.cfg"; }
251 ## Parse the novaboot script(s)
256 my ($modules, $variables, $generated, $continuation) = ([], {}, []);
257 my $skip_reading = defined($on_opt) || defined($off_opt);
258 while (!$skip_reading && ($_ = <>)) {
259 if ($ARGV ne $last_fn) { # New script
260 die "Missing EOF in $last_fn" if $file;
261 die "Unfinished line in $last_fn" if $continuation;
263 push @scripts, { 'filename' => $ARGV,
264 'modules' => $modules = [],
265 'variables' => $variables = {},
266 'generated' => $generated = []};
270 next if /^#/ || /^\s*$/; # Skip comments and empty lines
272 $_ =~ s/^[[:space:]]*// if ($continuation);
274 if (/\\$/) { # Line continuation
275 $continuation .= substr($_, 0, length($_)-1);
279 if ($continuation) { # Last continuation line
280 $_ = $continuation . $_;
284 foreach my $mod(@scriptmod) { eval $mod; }
286 if ($file && $_ eq $EOF) { # Heredoc end
290 if ($file) { # Heredoc content
291 push @{$file}, "$_\n";
294 if (/^([A-Z_]+)=(.*)$/) { # Internal variable
295 $$variables{$1} = $2;
296 push(@exiton, $2) if ($1 eq "EXITON");
299 if (s/^load *//) { # Load line
300 die("novaboot: '$last_fn' line $.: Missing file name\n") unless /^[^ <]+/;
301 if (/^([^ ]*)(.*?)[[:space:]]*<<([^ ]*)$/) { # Heredoc start
302 push @$modules, "$1$2";
304 push @$generated, {filename => $1, content => $file};
308 if (/^([^ ]*)(.*?)[[:space:]]*< ?(.*)$/) { # Command substitution
309 push @$modules, "$1$2";
310 push @$generated, {filename => $1, command => $3};
316 if (/^run (.*)/) { # run line
317 push @$generated, {command => $1};
321 die("novaboot: Cannot parse script '$last_fn' line $.. Didn't you forget 'load' keyword?\n");
324 # print Dumper(\@scripts);
326 foreach my $script (@scripts) {
327 $modules = $$script{modules};
328 @$modules[0] =~ s/^[^ ]*/$kernel_opt/ if $kernel_opt;
329 @$modules[0] .= ' ' . join(' ', @append) if @append;
332 if (exists $variables->{KERNEL}) {
333 $kernel = $variables->{KERNEL};
335 if ($CFG::hypervisor) {
336 $kernel = $CFG::hypervisor . " ";
337 if (exists $variables->{HYPERVISOR_PARAMS}) {
338 $kernel .= $variables->{HYPERVISOR_PARAMS};
340 $kernel .= $CFG::hypervisor_params;
344 @$modules = ($kernel, @$modules) if $kernel;
345 @$modules = (@chainloaders, @$modules);
346 @$modules = ("bin/boot/bender", @$modules) if ($bender || defined $ENV{'NOVABOOT_BENDER'});
350 foreach my $script (@scripts) {
351 print join("\n", @{$$script{modules}})."\n";
358 sub generate_configs($$$) {
359 my ($base, $generated, $filename) = @_;
360 if ($base) { $base = "$base/"; };
361 foreach my $g(@$generated) {
362 if (exists $$g{content}) {
363 my $config = $$g{content};
364 my $fn = $$g{filename};
365 open(my $f, '>', $fn) || die("$fn: $!");
366 map { s|\brom://([^ ]*)|$rom_prefix$base$1|g; print $f "$_"; } @{$config};
368 print "novaboot: Created $fn\n";
369 } elsif (exists $$g{command} && ! $no_file_gen) {
370 $ENV{SRCDIR} = dirname(File::Spec->rel2abs( $filename, $invocation_dir ));
371 if (exists $$g{filename}) {
372 system_verbose("( $$g{command} ) > $$g{filename}");
374 system_verbose($$g{command});
380 sub generate_grub_config($$$$;$)
382 my ($filename, $title, $base, $modules_ref, $preamble) = @_;
383 if ($base) { $base = "$base/"; };
384 open(my $fg, '>', $filename) or die "$filename: $!";
385 print $fg "$preamble\n" if $preamble;
386 print $fg "title $title\n" if $title;
387 #print $fg "root $base\n"; # root doesn't really work for (nd)
389 foreach (@$modules_ref) {
392 my ($kbin, $kcmd) = split(' ', $_, 2);
393 $kcmd = '' if !defined $kcmd;
394 print $fg "kernel ${base}$kbin $kcmd\n";
396 s|\brom://([^ ]*)|$rom_prefix$base$1|g; # Translate rom:// files - needed for vdisk parameter of sigma0
397 print $fg "module $base$_\n";
401 print("novaboot: Created $builddir/$filename\n");
405 sub generate_syslinux_config($$$$)
407 my ($filename, $title, $base, $modules_ref) = @_;
408 if ($base && $base !~ /\/$/) { $base = "$base/"; };
409 open(my $fg, '>', $filename) or die "$filename: $!";
410 print $fg "LABEL $title\n";
411 #TODO print $fg "MENU LABEL $human_readable_title\n";
413 my ($kbin, $kcmd) = split(' ', @$modules_ref[0], 2);
415 if (system("file $kbin|grep 'Linux kernel'") == 0) {
416 my $initrd = @$modules_ref[1];
417 die('To many "load" lines for Linux kernel') if (scalar @$modules_ref > 2);
418 print $fg "LINUX $base$kbin\n";
419 print $fg "APPEND $kcmd\n";
420 print $fg "INITRD $base$initrd\n";
422 print $fg "KERNEL mboot.c32\n";
424 foreach (@$modules_ref) {
425 s|\brom://([^ ]*)|$rom_prefix$base$1|g; # Translate rom:// files - needed for vdisk parameter of sigma0
426 push @append, "$base$_";
427 print $fg "APPEND ".join(' --- ', @append)."\n";
430 #TODO print $fg "TEXT HELP\n";
431 #TODO print $fg "some help here\n";
432 #TODO print $fg "ENDTEXT\n";
434 print("novaboot: Created $builddir/$filename\n");
438 sub generate_grub2_config($$$$;$$)
440 my ($filename, $title, $base, $modules_ref, $preamble, $prolog) = @_;
441 if ($base && substr($base,-1,1) ne '/') { $base = "$base/"; };
442 open(my $fg, '>', $filename) or die "$filename: $!";
443 print $fg "$preamble\n" if $preamble;
444 $title ||= 'novaboot';
445 print $fg "menuentry $title {\n";
446 print $fg "$prolog\n" if $prolog;
448 foreach (@$modules_ref) {
451 my ($kbin, $kcmd) = split(' ', $_, 2);
452 $kcmd = '' if !defined $kcmd;
453 print $fg " multiboot ${base}$kbin $kcmd\n";
456 # GRUB2 doesn't pass filename in multiboot info so we have to duplicate it here
457 $_ = join(' ', ($args[0], @args));
458 s|\brom://|$rom_prefix|g; # We do not need to translate path for GRUB2
459 print $fg " module $base$_\n";
464 print("novaboot: Created $builddir/$filename\n");
468 sub generate_pulsar_config($$)
470 my ($filename, $modules_ref) = @_;
471 open(my $fg, '>', $filename) or die "$filename: $!";
472 print $fg "root $pulsar_root\n" if defined $pulsar_root;
475 foreach (@$modules_ref) {
478 ($kbin, $kcmd) = split(' ', $_, 2);
479 $kcmd = '' if !defined $kcmd;
482 s|\brom://|$rom_prefix|g;
483 print $fg "load $_\n";
486 # Put kernel as last - this is needed for booting Linux and has no influence on non-Linux OSes
487 print $fg "exec $kbin $kcmd\n";
489 print("novaboot: Created $builddir/$filename\n");
493 sub shell_cmd_string(@)
495 return join(' ', map((/^[-_=a-zA-Z0-9\/\.\+]+$/ ? "$_" : "'$_'"), @_));
500 print "novaboot: Running: ".shell_cmd_string(@_)."\n";
502 exit(1); # should not be reached
505 sub system_verbose($)
508 print "novaboot: Running: $cmd\n";
509 my $ret = system($cmd);
510 if ($ret & 0x007f) { die("Command terminated by a signal"); }
511 if ($ret & 0xff00) {die("Command exit with non-zero exit code"); }
512 if ($ret) { die("Command failure $ret"); }
517 if (exists $variables->{WVDESC}) {
518 print "Testing \"$variables->{WVDESC}\" in $last_fn:\n";
519 } elsif ($last_fn =~ /\.wv$/) {
520 print "Testing \"all\" in $last_fn:\n";
523 ## Connect to the target and check whether it is not occupied
525 # We have to do this before file generation phase, because file
526 # generation is intermixed with file deployment phase and we want to
527 # check whether the target is not used by somebody else before
528 # deploying files. Otherwise, we may rewrite other user's files on a
531 my $exp; # Expect object to communicate with the target over serial line
533 my ($target_reset, $target_power_on, $target_power_off);
534 my ($amt_user, $amt_password, $amt_host, $amt_port);
536 if (defined $iprelay) {
538 $iprelay =~ /([.0-9]+)(:([0-9]+))?/;
541 my $paddr = sockaddr_in($port, inet_aton($addr));
542 my $proto = getprotobyname('tcp');
543 socket($IPRELAY, PF_INET, SOCK_STREAM, $proto) || die "socket: $!";
544 print "novaboot: Connecting to IP relay... ";
545 connect($IPRELAY, $paddr) || die "connect: $!";
547 $exp = Expect->init(\*$IPRELAY);
551 print $exp "\xFF\xF6"; # AYT
552 my $connected = $exp->expect(20, # Timeout in seconds
553 '<iprelayd: connected>',
554 '-re', '<WEB51 HW[^>]*>');
559 my ($relay, $onoff) = @_;
560 die unless ($relay == 1 || $relay == 2);
562 my $cmd = ($relay == 1 ? 0x5 : 0x6) | ($onoff ? 0x20 : 0x10);
563 return "\xFF\xFA\x2C\x32".chr($cmd)."\xFF\xF0";
567 my ($relay, $onoff) = @_;
568 die unless ($relay == 1 || $relay == 2);
569 my $cmd = ($relay == 1 ? 0xdf : 0xbf) | ($onoff ? 0x00 : 0xff);
570 return "\xFF\xFA\x2C\x97".chr($cmd)."\xFF\xF0";
574 my ($relay, $onoff, $can_giveup) = @_;
575 my $confirmation = '';
577 print $exp relaycmd($relay, $onoff);
578 my $confirmed = $exp->expect(20, # Timeout in seconds
579 relayconf($relay, $onoff));
582 print("Relay confirmation timeout - ignoring\n");
584 die "Relay confirmation timeout";
590 $target_reset = sub {
591 relay(2, 1, 1); # Reset the machine
596 $target_power_off = sub {
597 relay(1, 1); # Press power button
598 usleep(6000000); # Long press to switch off
602 $target_power_on = sub {
603 relay(1, 1); # Press power button
604 usleep(100000); # Short press
610 system_verbose("stty -F $serial $stty");
611 open($CONN, "+<", $serial) || die "open $serial: $!";
612 $exp = Expect->init(\*$CONN);
614 elsif ($remote_cmd) {
615 print "novaboot: Running: $remote_cmd\n";
616 $exp = Expect->spawn($remote_cmd);
618 elsif (defined $amt) {
619 require LWP::UserAgent;
620 require LWP::Authen::Digest;
623 my ($host, $username, $password, $schema, $className, $pstate) = @_;
624 #AMT numbers for PowerStateChange (MNI => bluescreen on windows;-)
625 my %pstates = ("on" => 2,
632 <s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope" xmlns:a="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:w="http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd">
633 <s:Header><a:To>http://$host:16992/wsman</a:To>
634 <w:ResourceURI s:mustUnderstand="true">$schema</w:ResourceURI>
635 <a:ReplyTo><a:Address s:mustUnderstand="true">http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous</a:Address></a:ReplyTo>
636 <a:Action s:mustUnderstand="true">$schema$className</a:Action>
637 <w:MaxEnvelopeSize s:mustUnderstand="true">153600</w:MaxEnvelopeSize>
638 <a:MessageID>uuid:709072C9-609C-4B43-B301-075004043C7C</a:MessageID>
639 <w:Locale xml:lang="en-US" s:mustUnderstand="false" />
640 <w:OperationTimeout>PT60.000S</w:OperationTimeout>
641 <w:SelectorSet><w:Selector Name="Name">Intel(r) AMT Power Management Service</w:Selector></w:SelectorSet>
643 <p:RequestPowerStateChange_INPUT xmlns:p="http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_PowerManagementService">
644 <p:PowerState>$pstates{$pstate}</p:PowerState>
645 <p:ManagedElement><a:Address>http://$host:16992/wsman</a:Address>
646 <a:ReferenceParameters><w:ResourceURI>http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_ComputerSystem</w:ResourceURI>
647 <w:SelectorSet><w:Selector Name="Name">ManagedSystem</w:Selector></w:SelectorSet>
648 </a:ReferenceParameters></p:ManagedElement>
649 </p:RequestPowerStateChange_INPUT>
650 </s:Body></s:Envelope>
655 my ($host, $username, $password, $content) = @_;
657 my $ua = LWP::UserAgent->new();
658 $ua->agent("novaboot");
660 my $req = HTTP::Request->new(POST => "http://$host:16992/wsman");
661 my $res = $ua->request($req);
662 die ("Unexpected AMT response: " . $res->status_line) unless $res->code == 401;
664 my ($realm) = $res->header("WWW-Authenticate") =~ /Digest realm="(.*?)"/;
665 $ua->credentials("$host:16992", $realm, $username => $password);
668 $req = HTTP::Request->new(POST => "http://$host:16992/wsman");
669 $req->content_type('application/x-www-form-urlencoded');
670 $req->content($content);
671 $res = $ua->request($req);
672 die ("AMT power change request failed: " . $res->status_line) unless $res->is_success;
673 $res->content() =~ /<g:ReturnValue>(\d+)<\/g:ReturnValue>/;
678 my ($host, $username, $password, $pstate)=@_;
679 my $schema="http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_PowerManagementService";
680 my $className="/RequestPowerStateChange";
681 my $content = genXML($host, $username, $password ,$schema, $className, $pstate);
682 return sendPOST($host, $username, $password, $content);
685 ($amt_user,$amt_password,$amt_host,$amt_port) = ($amt =~ /(?:(.*?)(?::(.*))?@)?([^:]*)(?::([0-9]*))?/);;
686 $amt_user ||= "admin";
687 $amt_password ||= $ENV{'AMT_PASSWORD'} || die "AMT password not specified";
688 $amt_host || die "AMT host not specified";
692 $target_power_off = sub {
694 my $result = powerChange($amt_host,$amt_user,$amt_password, "off");
695 die "AMT power off failed (ReturnValue $result)" if $result != 0;
698 $target_power_on = sub {
699 my $result = powerChange($amt_host,$amt_user,$amt_password, "on");
700 die "AMT power on failed (ReturnValue $result)" if $result != 0;
703 $target_reset = sub {
704 my $result = powerChange($amt_host,$amt_user,$amt_password, "reset");
706 print STDERR "Warning: Cannot reset $amt_host, trying power on. ";
707 $result = powerChange($amt_host,$amt_user,$amt_password, "on");
709 die "AMT reset failed (ReturnValue $result)" if $result != 0;
712 my $cmd = "amtterm -u $amt_user -p $amt_password $amt_host $amt_port";
713 print "novaboot: Running: $cmd\n" =~ s/\Q$amt_password\E/???/r;
714 $exp = Expect->spawn($cmd);
715 $exp->expect(10, "RUN_SOL") || die "Expect for 'RUN_SOL' timed out";
720 if ($remote_expect) {
721 $exp->expect(10, $remote_expect) || die "Expect for '$remote_expect' timed out";
724 if (defined $reset_cmd) {
725 $target_reset = sub {
726 system_verbose($reset_cmd);
730 if (defined $on_opt && defined $target_power_on) {
734 if (defined $off_opt && defined $target_power_off) {
735 print "novaboot: Switching the target off...\n";
736 &$target_power_off();
740 $builddir ||= dirname(File::Spec->rel2abs( ${$scripts[0]}{filename})) if scalar @scripts;
741 if (defined $builddir) {
742 chdir($builddir) or die "Can't change directory to $builddir: $!";
743 print "novaboot: Entering directory `$builddir'\n";
745 $builddir = $invocation_dir;
748 ## File generation phase
749 my (%files_iso, $menu_iso, $filename);
750 my $config_name = '';
753 foreach my $script (@scripts) {
754 $filename = $$script{filename};
755 $modules = $$script{modules};
756 $generated = $$script{generated};
757 $variables = $$script{variables};
759 ($config_name = $filename) =~ s#.*/##;
760 $config_name = $config_name_opt if (defined $config_name_opt);
762 if (exists $variables->{BUILDDIR}) {
763 $builddir = File::Spec->rel2abs($variables->{BUILDDIR});
764 chdir($builddir) or die "Can't change directory to $builddir: $!";
765 print "novaboot: Entering directory `$builddir'\n";
769 $prefix = $grub_prefix;
770 $prefix =~ s/\$NAME/$config_name/;
771 $prefix =~ s/\$BUILDDIR/$builddir/;
773 # TODO: use $grub_prefix as first parameter if some switch is given
774 generate_configs('', $generated, $filename);
776 ### Generate bootloader configuration files
777 my @bootloader_configs;
778 push @bootloader_configs, generate_grub_config($grub_config, $config_name, $prefix, $modules, $grub_preamble) if (defined $grub_config);
779 push @bootloader_configs, generate_grub2_config($grub2_config, $config_name, $prefix, $modules, $grub_preamble, $grub2_prolog) if (defined $grub2_config);
780 push @bootloader_configs, generate_pulsar_config('config-'.($pulsar||'novaboot'), $modules) if (defined $pulsar);
782 ### Run scons or make
784 my @files = map({ ($file) = m/([^ ]*)/; $file; } @$modules);
785 # Filter-out generated files
786 my @to_build = grep({ my $file = $_; !scalar(grep($file eq ($$_{filename} || ''), @$generated)) } @files);
788 system_verbose($scons || $CFG::scons." ".join(" ", @to_build)) if (defined $scons);
789 system_verbose($make || $CFG::make ." ".join(" ", @to_build)) if (defined $make);
792 ### Copy files (using rsync)
793 if (defined $server && !defined($gen_only)) {
794 (my $real_server = $server) =~ s/\$NAME/$config_name/;
796 my ($hostname, $path) = split(":", $real_server, 2);
797 if (! defined $path) {
801 my $files = join(" ", map({ ($file) = m/([^ ]*)/; $file; } ( @$modules, @bootloader_configs)));
802 map({ my $file = (split)[0]; die "$file: $!" if ! -f $file; } @$modules);
803 my $istty = -t STDOUT && ($ENV{'TERM'} || 'dumb') ne 'dumb';
804 my $progress = $istty ? "--progress" : "";
805 system_verbose("rsync $progress -RLp $rsync_flags $files $real_server");
806 if ($server =~ m|/\$NAME$| && $concat) {
807 my $cmd = join("; ", map { "( cd $path/.. && cat */$_ > $_ )" } @bootloader_configs);
808 system_verbose($hostname ? "ssh $hostname '$cmd'" : $cmd);
812 ### Prepare ISO image generation
813 if (defined $iso_image) {
814 generate_configs("(cd)", $generated, $filename);
816 generate_syslinux_config(\$menu, $config_name, "/", $modules);
817 $menu_iso .= "$menu\n";
818 map { ($file,undef) = split; $files_iso{$file} = 1; } @$modules;
822 ## Generate ISO image
823 if (defined $iso_image) {
824 system_verbose("mkdir -p isolinux");
827 if (-f '/usr/lib/ISOLINUX/isolinux.bin') {
828 # Newer ISOLINUX version
829 @files = qw(/usr/lib/ISOLINUX/isolinux.bin /usr/lib/syslinux/modules/bios/mboot.c32 /usr/lib/syslinux/modules/bios/libcom32.c32 /usr/lib/syslinux/modules/bios/menu.c32 /usr/lib/syslinux/modules/bios/ldlinux.c32);
831 # Older ISOLINUX version
832 @files = qw(/usr/lib/syslinux/isolinux.bin /usr/lib/syslinux/mboot.c32 /usr/lib/syslinux/menu.c32);
834 system_verbose("cp @files isolinux");
835 open(my $fh, ">isolinux/isolinux.cfg");
837 print $fh "TIMEOUT 50\n";
838 print $fh "DEFAULT menu\n";
840 print $fh "DEFAULT $config_name\n";
842 print $fh "$menu_iso";
845 my $files = join(" ", map("$_=$_", (keys(%files_iso), 'isolinux/isolinux.cfg', map(s|.*/|isolinux/|r, @files))));
846 $iso_image ||= "$config_name.iso";
848 # Note: We use -U flag below to "Allow 'untranslated' filenames,
849 # completely violating the ISO9660 standards". Without this
850 # option, isolinux is not able to read files names for example
852 system_verbose("$CFG::genisoimage -R -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -hide-rr-moved -U -o $iso_image -graft-points $files");
853 print("ISO image created: $builddir/$iso_image\n");
856 exit(0) if defined $gen_only;
858 ## Boot the system using various methods and send serial output to stdout
860 if (scalar(@scripts) > 1 && ( defined $dhcp_tftp || defined $serial || defined $iprelay)) {
861 die "You cannot do this with multiple scripts simultaneously";
864 if ($variables->{WVTEST_TIMEOUT}) {
865 print "wvtest: timeout ", $variables->{WVTEST_TIMEOUT}, "\n";
870 $str =~ s/^\s+|\s+$//g;
878 $qemu ||= $variables->{QEMU} || $CFG::qemu;
879 my @qemu_flags = split(" ", $qemu);
880 $qemu = shift(@qemu_flags);
882 @qemu_flags = split(/ +/, trim($variables->{QEMU_FLAGS})) if exists $variables->{QEMU_FLAGS};
883 @qemu_flags = split(/ +/, trim($qemu_flags_cmd)) if $qemu_flags_cmd;
884 push(@qemu_flags, split(/ +/, trim($qemu_append || '')));
886 if (defined $iso_image) {
887 # Boot NOVA with grub (and test the iso image)
888 push(@qemu_flags, ('-cdrom', $iso_image));
890 # Boot NOVA without GRUB
892 # Non-patched qemu doesn't like commas, but NUL can live with pluses instead of commans
893 foreach (@$modules) {s/,/+/g;}
894 generate_configs("", $generated, $filename);
896 if (scalar @$modules) {
897 my ($kbin, $kcmd) = split(' ', shift(@$modules), 2);
898 $kcmd = '' if !defined $kcmd;
900 @$modules = map { if (/\.dtb$/) { $dtb=$_; (); } else { $_ } } @$modules;
901 my $initrd = join ",", @$modules;
903 push(@qemu_flags, ('-kernel', $kbin, '-append', $kcmd));
904 push(@qemu_flags, ('-initrd', $initrd)) if $initrd;
905 push(@qemu_flags, ('-dtb', $dtb)) if $dtb;
908 push(@qemu_flags, qw(-serial stdio)); # Redirect serial output (for collecting test restuls)
909 unshift(@qemu_flags, ('-name', $config_name));
910 print "novaboot: Running: ".shell_cmd_string($qemu, @qemu_flags)."\n";
911 $exp = Expect->spawn(($qemu, @qemu_flags)) || die("exec() failed: $!");
914 ### Local DHCPD and TFTPD
916 my ($dhcpd_pid, $tftpd_pid);
918 $tftp=1 if $tftp_port;
920 if (defined $dhcp_tftp)
922 generate_configs("(nd)", $generated, $filename);
923 system_verbose('mkdir -p tftpboot');
924 generate_grub_config("tftpboot/os-menu.lst", $config_name, "(nd)", \@$modules, "timeout 0");
925 open(my $fh, '>', 'dhcpd.conf');
926 my $mac = `cat /sys/class/net/eth0/address`;
928 print $fh "subnet 10.23.23.0 netmask 255.255.255.0 {
929 range 10.23.23.10 10.23.23.100;
930 filename \"bin/boot/grub/pxegrub.pxe\";
931 next-server 10.23.23.1;
934 hardware ethernet $mac;
935 fixed-address 10.23.23.1;
938 system_verbose("sudo ip a add 10.23.23.1/24 dev eth0;
939 sudo ip l set dev eth0 up;
940 sudo touch dhcpd.leases");
942 # We run servers by forking ourselves, because the servers end up
943 # in our process group and get killed by signals sent to the
944 # process group (e.g. Ctrl-C on terminal).
946 exec_verbose("sudo dhcpd -d -cf dhcpd.conf -lf dhcpd.leases -pf dhcpd.pid") if ($dhcpd_pid == 0);
949 if (defined $dhcp_tftp || defined $tftp) {
951 # Unfortunately, tftpd requires root privileges even with
952 # non-privileged (>1023) port due to initgroups().
953 system_verbose("sudo in.tftpd --listen --secure -v -v -v --pidfile tftpd.pid --address :$tftp_port $builddir");
955 # Kill server when we die
956 $SIG{__DIE__} = sub { system_verbose('sudo pkill --pidfile=dhcpd.pid') if (defined $dhcp_tftp);
957 system_verbose('sudo pkill --pidfile=tftpd.pid'); };
959 # We have to kill tftpd explicitely, because it is not in our process group
960 $SIG{INT} = sub { system_verbose('sudo pkill --pidfile=tftpd.pid'); exit(0); };
965 my $ider_cmd= "amtider -c $iso_image -u $amt_user -p $amt_password $amt_host $amt_port" ;
966 print "novaboot: Running: $ider_cmd\n" =~ s/\Q$amt_password\E/???/r;
967 my $ider_pid = fork();
968 if ($ider_pid == 0) {
970 die "IDE redirection failed";
972 # FIXME: This collides with --tftp option. Hopefully, nobody needs
973 # to use both simultaneously.
974 $SIG{__DIE__} = sub { system_verbose('kill $ider_pid'); };
977 ### Reset target (IP relay, AMT, ...)
979 if (defined $target_reset) {
980 print "novaboot: Reseting the test box... ";
985 ### U-boot conversation
986 if (defined $uboot) {
987 my $uboot_prompt = $uboot || '=> ';
988 print "novaboot: Waiting for uBoot prompt...\n";
990 #$exp->exp_internal(1);
992 [qr/Hit any key to stop autoboot:/, sub { $exp->send("\n"); exp_continue; }],
993 $uboot_prompt) || die "No uBoot prompt deteceted";
994 foreach my $cmd (@uboot_init) {
995 if ($cmd =~ /\$NB_MYIP/) {
996 my $ip = (grep /inet /, `ip addr show eth0`)[0] || die "Problem determining our IP address";
997 $ip =~ s/\s*inet ([0-9.]*).*/$1/;
998 $cmd =~ s/\$NB_MYIP/$ip/g;
1001 $exp->send("$cmd\n");
1002 $exp->expect(10, $uboot_prompt) || die "uBoot prompt timeout";
1005 # Boot the system if there are some load lines in the script
1006 if (scalar(@$modules) > 0) {
1007 my ($kbin, $kcmd) = split(' ', shift(@$modules), 2);
1009 @$modules = map { if (/\.dtb$/) { $dtb=$_; (); } else { $_ } } @$modules;
1010 my $initrd = shift @$modules;
1012 my ($ramdisk_addr, $fdt_addr) = ('-', '');
1014 die "No '--uboot-addr kernel' given" unless $uboot_addr{kernel};
1015 $exp->send("tftpboot $uboot_addr{kernel} $prefix$kbin\n");
1017 [qr/##/, sub { exp_continue; }],
1018 $uboot_prompt) || die "No U-Boot prompt deteceted";
1020 die "No '--uboot-addr fdt' given" unless $uboot_addr{fdt};
1021 $fdt_addr = $uboot_addr{fdt};
1022 $exp->send("tftpboot $fdt_addr $prefix$dtb\n");
1024 [qr/##/, sub { exp_continue; }],
1025 $uboot_prompt) || die "Device tree load failed";
1027 if (defined $initrd) {
1028 die "No '--uboot-addr ramdisk' given" unless $uboot_addr{ramdisk};
1029 $ramdisk_addr = $uboot_addr{ramdisk};
1030 $exp->send("tftpboot $ramdisk_addr $prefix$initrd\n");
1032 [qr/#/, sub { exp_continue; }],
1033 $uboot_prompt) || die "Initrd load failed";
1035 $exp->send("setenv bootargs $kcmd\n");
1036 $exp->expect(5, $uboot_prompt) || die "uBoot prompt timeout";
1037 $exp->send("bootm $uboot_addr{kernel} $ramdisk_addr $fdt_addr\n");
1038 $exp->expect(5, "\n") || die "uBoot command timeout";
1042 ### Serial line interaction
1044 # Serial line of the target is available
1045 my $interrupt = 'Ctrl-C';
1046 if ($interactive && !@exiton) {
1047 $interrupt = '"~~."';
1049 my $note = (-t STDIN) ? '' : '- only target->host ';
1050 print "novaboot: Serial line interaction $note(press $interrupt to interrupt)...\n";
1051 $exp->log_stdout(1);
1053 $exp->expect(undef, @expect_raw, @exiton);
1055 my @inputs = ($exp);
1056 if (-t STDIN) { # Set up bi-directional communication if we run on terminal
1057 my $infile = new IO::File;
1058 $infile->IO::File::fdopen(*STDIN,'r');
1059 my $in_object = Expect->exp_init($infile);
1060 $in_object->set_group($exp);
1063 $in_object->set_seq('~~\.', sub { print "novaboot: Escape sequence detected\r\n"; undef; });
1064 $in_object->manual_stty(0); # Use raw terminal mode
1066 $in_object->manual_stty(1); # Do not modify terminal settings
1068 push(@inputs, $in_object);
1071 #print Dumper(\@expect_raw);
1072 $exp->expect(undef, @expect_raw) if @expect_raw;
1073 Expect::interconnect(@inputs) unless defined($exp->exitstatus);
1077 ## Kill dhcpc or tftpd
1078 if (defined $dhcp_tftp || defined $tftp) {
1079 die("novaboot: This should kill servers on background\n");
1086 novaboot - A tool for booting various operating systems on various hardware or in qemu
1092 B<novaboot> [option]... [--] script...
1094 B<./script> [option]...
1098 This program makes booting of an operating system (e.g. NOVA or Linux)
1099 as simple as running a local program. It facilitates booting on local
1100 or remote hosts or in emulators such as qemu. Novaboot operation is
1101 controlled by command line options and by a so called novaboot script,
1102 which can be thought as a generalization of bootloader configuration
1103 files (see L</"NOVABOOT SCRIPT SYNTAX">). Based on this input,
1104 novaboot setups everything for the target host to boot the desired
1105 configuration, i.e. it generates the bootloader configuration file in
1106 the proper format, deploy the binaries and other needed files to
1107 required locations, perhaps on a remote boot server and reset the
1108 target host. Finally, target host's serial output is redirected to
1109 standard output if that is possible.
1111 Typical way of using novaboot is to make the novaboot script
1112 executable and set its first line to I<#!/usr/bin/env novaboot>. Then,
1113 booting a particular OS configuration becomes the same as executing a
1114 local program - the novaboot script.
1116 For example, with C<novaboot> you can:
1122 Run an OS in Qemu. This is the default action when no other action is
1123 specified by command line switches. Thus running C<novaboot ./script>
1124 (or C<./script> as described above) will run Qemu and make it boot the
1125 configuration specified in the F<script>.
1129 Create a bootloader configuration file (currently supported
1130 bootloaders are GRUB, GRUB2, Pulsar and U-Boot) and copy it with all
1131 other files needed for booting to a remote boot server.
1133 ./script --server=192.168.1.1:/tftp --iprelay=192.168.1.2
1135 This command copies files to the TFTP server and uses
1136 TCP/IP-controlled relay to reset the target host and receive its
1141 Run DHCP and TFTP server on developer's machine to PXE-boot the target
1144 ./script --dhcp-tftp
1146 When a PXE-bootable machine is connected via Ethernet to developer's
1147 machine, it will boot the configuration described in I<script>.
1151 Create bootable ISO images. E.g.
1153 novaboot --iso -- script1 script2
1155 The created ISO image will have GRUB bootloader installed on it and
1156 the boot menu will allow selecting between I<script1> and I<script2>
1161 Note that the options needed for a specific target can be stored in a
1162 L</"CONFIGURATION FILE">. Then it is sufficient to use only the B<-t>
1163 option to specify the name of the target.
1165 =head1 PHASES AND OPTIONS
1167 Novaboot performs its work in several phases. Each phase can be
1168 influenced by several options, certain phases can be skipped. The list
1169 of phases (in the execution order) and the corresponding options
1172 =head2 Configuration reading phase
1174 After starting, novaboot reads configuration files. Their content is
1175 described in L</"CONFIGURATION FILE">. By default, configuration is
1176 read from two locations. First from the configuration directory and
1177 second from F<.novaboot> files along the path to the current
1178 directory. The later read files override settings from the former
1181 Configuration directory is determined by the content of
1182 NOVABOOT_CONFIG_DIR environment variable defaulting to
1183 F</etc/novaboot.d>. Files in this directory with names consisting
1184 solely from English letters, numbers, dashes '-' and underscores '_'
1185 (note that dot '.' is not included) are read in alphabetical order.
1187 Then novaboot searches for files named F<.novaboot> starting
1188 from the directory of the novaboot script (or working directory, see
1189 bellow) and continuing upwards up to the root directory. The found
1190 configuration files are then read in order from the root directory
1193 In certain cases, the location of the novaboot script cannot be
1194 determined in this early phase. This happens either when the script is
1195 read from the standard input or when novaboot is invoked explicitly
1196 and options precede the script name, as in the example L</"4."> above.
1197 In this case the current working directory is used as a starting point
1198 for configuration file search instead of the novaboot script
1203 =item -c, --config=I<filename>
1205 Use the specified configuration file instead of the default one(s).
1209 =head2 Command line processing phase
1215 Dump the current configuration to stdout end exits. Useful as an
1216 initial template for a configuration file.
1220 Print short (B<-h>) or long (B<--help>) help.
1222 =item -t, --target=I<target>
1224 This option serves as a user configurable shortcut for other novaboot
1225 options. The effect of this option is the same as the options stored
1226 in the C<%targets> configuration variable under key I<target>. See
1227 also L</"CONFIGURATION FILE">.
1231 =head2 Script preprocessing phase
1233 This phases allows to modify the parsed novaboot script before it is
1234 used in the later phases.
1238 =item -a, --append=I<parameters>
1240 Append a string to the first C<load> line in the novaboot script. This
1241 can be used to append parameters to the kernel's or root task's
1242 command line. Can appear multiple times.
1246 Use F<bender> chainloader. Bender scans the PCI bus for PCI serial
1247 ports and stores the information about them in the BIOS data area for
1250 =item --chainloader=I<chainloader>
1252 Chainloader that is loaded before the kernel and other files specified
1253 in the novaboot script. E.g. 'bin/boot/bender promisc'.
1257 Print the modules to boot and their parameters after this phase
1258 finishes. Then exit. This is useful for seeing the effect of other
1259 options in this section.
1261 =item -k, --kernel=F<file>
1263 Replace the first word on the first C<load> line in the novaboot
1264 script with F<file>.
1266 =item --scriptmod=I<perl expression>
1268 When novaboot script is read, I<perl expression> is executed for every
1269 line (in $_ variable). For example, C<novaboot
1270 --scriptmod=s/sigma0/omega6/g> replaces every occurrence of I<sigma0>
1271 in the script with I<omega6>.
1273 When this option is present, it overrides I<$script_modifier> variable
1274 from the configuration file, which has the same effect. If this option
1275 is given multiple times all expressions are evaluated in the command
1280 =head2 File generation phase
1282 In this phase, files needed for booting are generated in a so called
1283 I<build directory> (see L</--build-dir>). In most cases configuration
1284 for a bootloader is generated automatically by novaboot. It is also
1285 possible to generate other files using I<heredoc> or I<"<"> syntax in
1286 novaboot scripts. Finally, binaries can be generated in this phases by
1287 running C<scons> or C<make>.
1291 =item --build-dir=I<directory>
1293 Overrides the default build directory location.
1295 The default build directory location is determined as follows: If the
1296 configuration file defines the C<$builddir> variable, its value is
1297 used. Otherwise, it is the directory that contains the first processed
1300 See also L</BUILDDIR> variable.
1302 =item -g, --grub[=I<filename>]
1304 Generates grub bootloader menu file. If the I<filename> is not
1305 specified, F<menu.lst> is used. The I<filename> is relative to the
1306 build directory (see B<--build-dir>).
1308 =item --grub-preamble=I<prefix>
1310 Specifies the I<preable> that is at the beginning of the generated
1311 GRUB or GRUB2 config files. This is useful for specifying GRUB's
1314 =item --prefix=I<prefix>
1316 Specifies I<prefix> (e.g. F</srv/tftp>) that is put in front of every
1317 file name in generated bootloader configuration files (or in U-Boot
1320 If the I<prefix> contains string $NAME, it will be replaced with the
1321 name of the novaboot script (see also B<--name>).
1323 If the I<prefix> contains string $BUILDDIR, it will be replaced with
1324 the build directory (see also B<--build-dir>).
1328 Alias for B<--prefix>.
1330 =item --grub2[=I<filename>]
1332 Generate GRUB2 menuentry in I<filename>. If I<filename> is not
1333 specified F<grub.cfg> is used. The content of the menuentry can be
1334 customized with B<--grub-preable>, B<--grub2-prolog> or
1335 B<--grub_prefix> options.
1337 In order to use the the generated menuentry on your development
1338 machine that uses GRUB2, append the following snippet to
1339 F</etc/grub.d/40_custom> file and regenerate your grub configuration,
1340 i.e. run update-grub on Debian/Ubuntu.
1342 if [ -f /path/to/nul/build/grub.cfg ]; then
1343 source /path/to/nul/build/grub.cfg
1346 =item --grub2-prolog=I<prolog>
1348 Specifies text I<preable> that is put at the beginning of the entry
1351 =item -m, --make[=make command]
1353 Runs C<make> to build files that are not generated by novaboot itself.
1355 =item --name=I<string>
1357 Use the name I<string> instead of the name of the novaboot script.
1358 This name is used for things like a title of grub menu or for the
1359 server directory where the boot files are copied to.
1363 Do not run external commands to generate files (i.e. "<" syntax and
1364 C<run> keyword). This switch does not influence generation of files
1365 specified with "<<WORD" syntax.
1367 =item -p, --pulsar[=mac]
1369 Generates pulsar bootloader configuration file named F<config-I<mac>>
1370 The I<mac> string is typically a MAC address and defaults to
1373 =item --scons[=scons command]
1375 Runs C<scons> to build files that are not generated by novaboot
1380 Strip I<rom://> prefix from command lines and generated config files.
1381 The I<rom://> prefix is used by NUL. For NRE, it has to be stripped.
1385 Exit novaboot after file generation phase.
1389 =head2 Target connection check
1391 If supported by the target, the connection to it is made and it is
1392 checked whether the target is not occupied by another novaboot
1397 =item --amt=I<"[user[:password]@]host[:port]>
1399 Use Intel AMT technology to control the target machine. WS management
1400 is used to powercycle it and Serial-Over-Lan (SOL) for input/output.
1401 The hostname or (IP address) is given by the I<host> parameter. If
1402 I<password> is not specified, environment variable AMT_PASSWORD is
1403 used. The I<port> specifies a TCP port for SOL. If not specified, the
1404 default is 16992. Default I<user> is admin.
1408 Use Intel AMT technology for IDE redirection. This allows the target
1409 machine to boot from nonvaboot created ISO image.
1411 The experimental I<amtider> utility needed by this option can be
1412 obtained from https://github.com/wentasah/amtterm.
1414 =item --iprelay=I<addr[:port]>
1416 Use TCP/IP relay and serial port to access the target's serial port
1417 and powercycle it. The IP address of the relay is given by I<addr>
1418 parameter. If I<port> is not specified, it default to 23.
1420 Note: This option is supposed to work with HWG-ER02a IP relays.
1422 =item -s, --serial[=device]
1424 Target's serial line is connected to host's serial line (device). The
1425 default value for device is F</dev/ttyUSB0>.
1427 The value of this option is exported in NB_NOVABOOT environment
1428 variable to all subprocesses run by C<novaboot>.
1430 =item --stty=I<settings>
1432 Specifies settings passed to C<stty> invoked on the serial line
1433 specified with B<--serial> option. If this option is not given,
1434 C<stty> is called with C<raw -crtscts -onlcr 115200> settings.
1436 =item --remote-cmd=I<cmd>
1438 Command that mediates connection to the target's serial line. For
1439 example C<ssh server 'cu -l /dev/ttyS0'>.
1441 =item --remote-expect=I<string>
1443 Wait for reception of I<string> after establishing the the remote
1444 connection before continuing.
1449 =head2 File deployment phase
1451 In some setups, it is necessary to copy the files needed for booting
1452 to a particular location, e.g. to a TFTP boot server or to the
1457 =item -d, --dhcp-tftp
1459 Turns your workstation into a DHCP and TFTP server so that the OS can
1460 be booted via PXE BIOS (or similar mechanism) on the test machine
1461 directly connected by a plain Ethernet cable to your workstation.
1463 The DHCP and TFTP servers requires root privileges and C<novaboot>
1464 uses C<sudo> command to obtain those. You can put the following to
1465 I</etc/sudoers> to allow running the necessary commands without asking
1468 Cmnd_Alias NOVABOOT = /bin/ip a add 10.23.23.1/24 dev eth0, /bin/ip l set dev eth0 up, /usr/sbin/dhcpd -d -cf dhcpd.conf -lf dhcpd.leases -pf dhcpd.pid, /usr/sbin/in.tftpd --listen --secure -v -v -v --pidfile tftpd.pid *, /usr/bin/touch dhcpd.leases, /usr/bin/pkill --pidfile=dhcpd.pid, /usr/bin/pkill --pidfile=tftpd.pid
1469 your_login ALL=NOPASSWD: NOVABOOT
1473 Starts a TFTP server on your workstation. This is similar to
1474 B<--dhcp-tftp> except that DHCP server is not started.
1476 The TFTP server require root privileges and C<novaboot> uses C<sudo>
1477 command to obtain those. You can put the following to I</etc/sudoers>
1478 to allow running the necessary commands without asking for password.
1480 Cmnd_Alias NOVABOOT = /usr/sbin/in.tftpd --listen --secure -v -v -v --pidfile tftpd.pid *, /usr/bin/pkill --pidfile=tftpd.pid
1481 your_login ALL=NOPASSWD: NOVABOOT
1483 =item --tftp-port=I<port>
1485 Port to run the TFTP server on. Implies B<--tftp>.
1487 =item --iso[=filename]
1489 Generates the ISO image that boots NOVA system via GRUB. If no filename
1490 is given, the image is stored under I<NAME>.iso, where I<NAME> is the name
1491 of the novaboot script (see also B<--name>).
1493 =item --server[=[[user@]server:]path]
1495 Copy all files needed for booting to another location (implies B<-g>
1496 unless B<--grub2> is given). The files will be copied (by B<rsync>
1497 tool) to the directory I<path>. If the I<path> contains string $NAME,
1498 it will be replaced with the name of the novaboot script (see also
1503 If B<--server> is used and its value ends with $NAME, then after
1504 copying the files, a new bootloader configuration file (e.g. menu.lst)
1505 is created at I<path-wo-name>, i.e. the path specified by B<--server>
1506 with $NAME part removed. The content of the file is created by
1507 concatenating all files of the same name from all subdirectories of
1508 I<path-wo-name> found on the "server".
1510 =item --rsync-flags=I<flags>
1512 Specifies which I<flags> are appended to F<rsync> command line when
1513 copying files as a result of I<--server> option.
1517 =head2 Target power-on and reset phase
1523 Switch on/off the target machine and exit. The script (if any) is
1524 completely ignored. Currently it works only with B<--iprelay> or
1527 =item -Q, --qemu[=I<qemu-binary>]
1529 Boot the configuration in qemu. Optionally, the name of qemu binary
1530 can be specified as a parameter.
1532 =item --qemu-append=I<flags>
1534 Append I<flags> to the default qemu flags (QEMU_FLAGS variable or
1535 C<-cpu coreduo -smp 2>).
1537 =item -q, --qemu-flags=I<flags>
1539 Replace the default qemu flags (QEMU_FLAGS variable or C<-cpu coreduo
1540 -smp 2>) with I<flags> specified here.
1542 =item --reset-cmd=I<cmd>
1544 Command that resets the target.
1548 =head2 Interaction with the bootloader on the target
1552 =item --uboot[=I<prompt>]
1554 Interact with uBoot bootloader to boot the thing described in the
1555 novaboot script. I<prompt> specifies the U-Boot's prompt (default is
1556 "=> ", other common prompts are "U-Boot> " or "U-Boot# ").
1557 Implementation of this option is currently tied to a particular board
1558 that we use. It may be subject to changes in the future!
1562 Command(s) to send the U-Boot bootloader before loading the images and
1563 booting them. This option can be given multiple times. After sending
1564 commands from each option novaboot waits for U-Boot I<prompt>.
1566 If the command contains string I<$NB_MYIP> then this string is
1567 replaced by IPv4 address of eth0 interface.
1569 =item --uboot-addr I<name>=I<address>
1571 Load address of U-Boot's C<tftpboot> command for loading I<name>,
1572 where name is one of I<kernel>, I<ramdisk> or I<fdt> (flattened device
1577 =head2 Target interaction phase
1579 In this phase, target's serial output is redirected to stdout and if
1580 stdin is a TTY, it is redirected to the target's serial input allowing
1581 interactive work with the target.
1585 =item --exiton=I<string>
1587 When I<string> is sent by the target, novaboot exits. This option can
1588 be specified multiple times.
1590 If I<string> is C<-re>, then the next B<--exiton>'s I<string> is
1591 treated as regular expression. For example:
1593 --exiton -re --exiton 'error:.*failed'
1595 =item -i, --interactive
1597 Setup things for interactive use of target. Your terminal will be
1598 switched to raw mode. In raw mode, your system does not process input
1599 in any way (no echoing of entered characters, no interpretation
1600 special characters). This, among others, means that Ctrl-C is passed
1601 to the target and does no longer interrupt novaboot. Use "~~."
1602 sequence to exit novaboot.
1604 =item --expect=I<string>
1606 When I<string> is received from the target, send the string specified
1607 with the subsequent B<--send*> option to the target.
1609 =item --expect-re=I<regex>
1611 When target's output matches regular expression I<regex>, send the
1612 string specified with the subsequent B<--send*> option to the target.
1614 =item --expect-raw=I<perl-code>
1616 Provides direct control over Perl's Expect module.
1618 =item --send=I<string>
1620 Send I<string> to the target after the previously specified
1621 B<--expect*> was matched in the target's output. The I<string> may
1622 contain escape sequences such as "\n".
1624 Note that I<string> is actually interpreted by Perl, so it can contain
1625 much more that escape sequences. This behavior may change in the
1628 Example: C<--expect='login: ' --send='root\n'>
1630 =item --sendcont=I<string>
1632 Similar to B<--send> but continue expecting more input.
1634 Example: C<--expect='Continue?' --sendcont='yes\n'>
1638 =head1 NOVABOOT SCRIPT SYNTAX
1640 The syntax tries to mimic POSIX shell syntax. The syntax is defined
1641 with the following rules.
1643 Lines starting with "#" and empty lines are ignored.
1645 Lines that end with "\" are concatenated with the following line after
1646 removal of the final "\" and leading whitespace of the following line.
1648 Lines of the form I<VARIABLE=...> (i.e. matching '^[A-Z_]+=' regular
1649 expression) assign values to internal variables. See L</VARIABLES>
1652 Lines starting with C<load> keyword represent modules to boot. The
1653 word after C<load> is a file name (relative to the build directory
1654 (see B<--build-dir>) of the module to load and the remaining words are
1655 passed to it as the command line parameters.
1657 When the C<load> line ends with "<<WORD" then the subsequent lines
1658 until the line containing solely WORD are copied literally to the file
1659 named on that line. This is similar to shell's heredoc feature.
1661 When the C<load> line ends with "< CMD" then command CMD is executed
1662 with F</bin/sh> and its standard output is stored in the file named on
1663 that line. The SRCDIR variable in CMD's environment is set to the
1664 absolute path of the directory containing the interpreted novaboot
1667 Lines starting with C<run> keyword contain shell commands that are run
1668 during file generation phase. This is the same as the "< CMD" syntax
1669 for C<load> keyboard except that the command's output is not
1670 redirected to a file. The ordering of commands is the same as they
1671 appear in the novaboot script.
1675 #!/usr/bin/env novaboot
1676 load bzImage console=ttyS0,115200
1677 run make -C buildroot
1678 load rootfs.cpio < gen_cpio buildroot/images/rootfs.cpio "myapp->/etc/init.d/S99myapp"
1680 Example (NOVA User Land - NUL):
1682 #!/usr/bin/env novaboot
1683 WVDESC=Example program
1684 load bin/apps/sigma0.nul S0_DEFAULT script_start:1,1 \
1685 verbose hostkeyb:0,0x60,1,12,2
1686 load bin/apps/hello.nul
1687 load hello.nulconfig <<EOF
1688 sigma0::mem:16 name::/s0/log name::/s0/timer name::/s0/fs/rom ||
1689 rom://bin/apps/hello.nul
1692 This example will load three modules: F<sigma0.nul>, F<hello.nul> and
1693 F<hello.nulconfig>. sigma0 receives some command line parameters and
1694 F<hello.nulconfig> file is generated on the fly from the lines between
1695 C<<<EOF> and C<EOF>.
1699 The following variables are interpreted in the novaboot script:
1705 Novaboot chdir()s to this directory before file generation phase. The
1706 directory name specified here is relative to the build directory
1707 specified by other means (see L</--build-dir>).
1711 Assigning this variable has the same effect as specifying L</--exiton>
1714 =item HYPERVISOR_PARAMS
1716 Parameters passed to hypervisor. The default value is "serial", unless
1717 overridden in configuration file.
1721 The kernel to use instead of the hypervisor specified in the
1722 configuration file with the C<$hypervisor> variable. The value should
1723 contain the name of the kernel image as well as its command line
1724 parameters. If this variable is defined and non-empty, the variable
1725 HYPERVISOR_PARAMS is not used.
1729 Use a specific qemu binary (can be overridden with B<-Q>) and flags
1730 when booting this script under qemu. If QEMU_FLAGS variable is also
1731 specified flags specified in QEMU variable are replaced by those in
1736 Use specific qemu flags (can be overridden with B<-q>).
1740 Description of the wvtest-compliant program.
1742 =item WVTEST_TIMEOUT
1744 The timeout in seconds for WvTest harness. If no complete line appears
1745 in the test output within the time specified here, the test fails. It
1746 is necessary to specify this for long running tests that produce no
1747 intermediate output.
1751 =head1 CONFIGURATION FILE
1753 Novaboot can read its configuration from one or more files. By
1754 default, novaboot looks for files named F<.novaboot> as described in
1755 L</Configuration reading phase>. Alternatively, configuration file
1756 location can be specified with the B<-c> switch or with the
1757 NOVABOOT_CONFIG environment variable. The configuration file has perl
1758 syntax and should set values of certain Perl variables. The current
1759 configuration can be dumped with the B<--dump-config> switch. Some
1760 configuration variables can be overridden by environment variables
1761 (see below) or by command line switches.
1763 Supported configuration variables include:
1769 Build directory location relative to the location of the configuration
1772 =item $default_target
1774 Default target (see below) to use when no target is explicitly
1775 specified on command line with the B<--target> option.
1779 Hash of target definitions to be used with the B<--target> option. The
1780 key is the identifier of the target, the value is the string with
1781 command line options. For instance, if the configuration file contains:
1783 $targets{'mybox'} = '--server=boot:/tftproot --serial=/dev/ttyUSB0 --grub',
1785 then the following two commands are equivalent:
1787 ./script --server=boot:/tftproot --serial=/dev/ttyUSB0 --grub
1792 =head1 ENVIRONMENT VARIABLES
1794 Some options can be specified not only via config file or command line
1795 but also through environment variables. Environment variables override
1796 the values from configuration file and command line parameters
1797 override the environment variables.
1801 =item NOVABOOT_CONFIG
1803 Name of the novaboot configuration file to use instead of the default
1806 =item NOVABOOT_CONFIG_DIR
1808 Name of the novaboot configuration directory. When not specified
1809 F</etc/novaboot.d> is used.
1811 =item NOVABOOT_BENDER
1813 Defining this variable has the same meaning as B<--bender> option.
1819 Michal Sojka <sojka@os.inf.tu-dresden.de>