]> rtime.felk.cvut.cz Git - mcf548x/linux.git/blob - arch/m68k/coldfire/MCD_dma.h
Current (FEC from 2.6.31 port, no CAN, no I2C, no PCI)
[mcf548x/linux.git] / arch / m68k / coldfire / MCD_dma.h
1 /*
2  * drivers/dma/MCD_dma.h
3  *
4  * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
5  * Kurt Mahan <kmahan@freescale.com>
6  * Shrek Wu b16972@freescale.com
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23 #ifndef _MCD_API_H
24 #define _MCD_API_H
25
26 /*
27  * Turn Execution Unit tasks ON (#define) or OFF (#undef)
28  */
29 #undef MCD_INCLUDE_EU
30
31 /*
32  * Number of DMA channels
33  */
34 #define NCHANNELS 16
35
36 /*
37  * Total number of variants
38  */
39 #ifdef MCD_INCLUDE_EU
40 #define NUMOFVARIANTS   6
41 #else
42 #define NUMOFVARIANTS   4
43 #endif
44
45 /*
46  * Define sizes of the various tables
47  */
48 #define TASK_TABLE_SIZE     (NCHANNELS*32)
49 #define VAR_TAB_SIZE        (128)
50 #define CONTEXT_SAVE_SIZE   (128)
51 #define FUNCDESC_TAB_SIZE   (256)
52
53 #ifdef MCD_INCLUDE_EU
54 #define FUNCDESC_TAB_NUM    16
55 #else
56 #define FUNCDESC_TAB_NUM    1
57 #endif
58
59
60 #ifndef DEFINESONLY
61
62 /*
63  * Portability typedefs
64  */
65 typedef int s32;
66 typedef unsigned int u32;
67 typedef short s16;
68 typedef unsigned short u16;
69 typedef char s8;
70 typedef unsigned char u8;
71
72 /*
73  * These structures represent the internal registers of the
74  * multi-channel DMA
75  */
76 struct dmaRegs_s {
77    u32 taskbar;         /* task table base address register */
78    u32 currPtr;
79    u32 endPtr;
80    u32 varTablePtr;
81    u16 dma_rsvd0;
82    u16 ptdControl;      /* ptd control */
83    u32 intPending;      /* interrupt pending register */
84    u32 intMask;         /* interrupt mask register */
85    u16 taskControl[16]; /* task control registers */
86    u8  priority[32];    /* priority registers */
87    u32 initiatorMux;    /* initiator mux control */
88    u32 taskSize0;       /* task size control register 0. */
89    u32 taskSize1;       /* task size control register 1. */
90    u32 dma_rsvd1;       /* reserved */
91    u32 dma_rsvd2;       /* reserved */
92    u32 debugComp1;      /* debug comparator 1 */
93    u32 debugComp2;      /* debug comparator 2 */
94    u32 debugControl;    /* debug control */
95    u32 debugStatus;     /* debug status */
96    u32 ptdDebug;        /* priority task decode debug */
97    u32 dma_rsvd3[31];   /* reserved */
98 };
99 typedef volatile struct dmaRegs_s dmaRegs;
100
101 #endif
102
103 /*
104  * PTD contrl reg bits
105  */
106 #define PTD_CTL_TSK_PRI         0x8000
107 #define PTD_CTL_COMM_PREFETCH   0x0001
108
109 /*
110  * Task Control reg bits and field masks
111  */
112 #define TASK_CTL_EN             0x8000
113 #define TASK_CTL_VALID          0x4000
114 #define TASK_CTL_ALWAYS         0x2000
115 #define TASK_CTL_INIT_MASK      0x1f00
116 #define TASK_CTL_ASTRT          0x0080
117 #define TASK_CTL_HIPRITSKEN     0x0040
118 #define TASK_CTL_HLDINITNUM     0x0020
119 #define TASK_CTL_ASTSKNUM_MASK  0x000f
120
121 /*
122  * Priority reg bits and field masks
123  */
124 #define PRIORITY_HLD            0x80
125 #define PRIORITY_PRI_MASK       0x07
126
127 /*
128  * Debug Control reg bits and field masks
129  */
130 #define DBG_CTL_BLOCK_TASKS_MASK    0xffff0000
131 #define DBG_CTL_AUTO_ARM            0x00008000
132 #define DBG_CTL_BREAK               0x00004000
133 #define DBG_CTL_COMP1_TYP_MASK      0x00003800
134 #define DBG_CTL_COMP2_TYP_MASK      0x00000070
135 #define DBG_CTL_EXT_BREAK           0x00000004
136 #define DBG_CTL_INT_BREAK           0x00000002
137
138 /*
139  * PTD Debug reg selector addresses
140  * This reg must be written with a value to show the contents of
141  * one of the desired internal register.
142  */
143 #define PTD_DBG_REQ             0x00
144 /* shows the state of 31 initiators */
145 #define PTD_DBG_TSK_VLD_INIT    0x01
146 /* shows which 16 tasks are valid and
147  * have initiators asserted */
148
149
150 /*
151  * General return values
152  */
153 #define MCD_OK                   0
154 #define MCD_ERROR               -1
155 #define MCD_TABLE_UNALIGNED     -2
156 #define MCD_CHANNEL_INVALID     -3
157
158 /*
159  * MCD_initDma input flags
160  */
161 #define MCD_RELOC_TASKS         0x00000001
162 #define MCD_NO_RELOC_TASKS      0x00000000
163 #define MCD_COMM_PREFETCH_EN    0x00000002
164 /* Commbus Prefetching - MCF547x/548x ONLY */
165
166 /*
167  * MCD_dmaStatus Status Values for each channel
168  */
169 #define MCD_NO_DMA  1
170 /* No DMA has been requested since reset */
171 #define MCD_IDLE    2
172 /* DMA active, but the initiator is currently inactive */
173 #define MCD_RUNNING 3
174 /* DMA active, and the initiator is currently active */
175 #define MCD_PAUSED  4
176 /* DMA active but it is currently paused */
177 #define MCD_HALTED  5
178 /* the most recent DMA has been killed with MCD_killTask() */
179 #define MCD_DONE    6
180 /* the most recent DMA has completed. */
181
182
183 /*
184  * MCD_startDma parameter defines
185  */
186
187 /*
188  * Constants for the funcDesc parameter
189  */
190 /* Byte swapping: */
191 #define MCD_NO_BYTE_SWAP    0x00045670
192 /* to disable byte swapping. */
193 #define MCD_BYTE_REVERSE    0x00076540
194 /* to reverse the bytes of each u32 of the DMAed data. */
195 #define MCD_U16_REVERSE     0x00067450
196 /* to reverse the 16-bit halves of
197  * each 32-bit data value being DMAed.*/
198 #define MCD_U16_BYTE_REVERSE    0x00054760
199 /* to reverse the byte halves of each
200  * 16-bit half of each 32-bit data value DMAed */
201 #define MCD_NO_BIT_REV  0x00000000
202 /* do not reverse the bits of each byte DMAed. */
203 #define MCD_BIT_REV     0x00088880
204 /* reverse the bits of each byte DMAed */
205 /* CRCing: */
206 #define MCD_CRC16       0xc0100000
207 /* to perform CRC-16 on DMAed data. */
208 #define MCD_CRCCCITT    0xc0200000
209 /* to perform CRC-CCITT on DMAed data. */
210 #define MCD_CRC32       0xc0300000
211 /* to perform CRC-32 on DMAed data. */
212 #define MCD_CSUMINET    0xc0400000
213 /* to perform internet checksums on DMAed data.*/
214 #define MCD_NO_CSUM     0xa0000000
215 /* to perform no checksumming. */
216
217 #define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM)
218 #define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM)
219
220 /*
221  * Constants for the flags parameter
222  */
223 #define MCD_TT_FLAGS_RL   0x00000001 /* Read line */
224 #define MCD_TT_FLAGS_CW   0x00000002 /* Combine Writes */
225 #define MCD_TT_FLAGS_SP   0x00000004
226 /* Speculative prefetch(XLB) MCF547x/548x ONLY  */
227 #define MCD_TT_FLAGS_PI   0x00000040 /* Precise Increment */
228 #define MCD_TT_FLAGS_MASK 0x000000ff
229 #define MCD_TT_FLAGS_DEF  (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW)
230
231 #define MCD_SINGLE_DMA  0x00000100 /* Unchained DMA */
232 #define MCD_CHAIN_DMA              /* TBD */
233 #define MCD_EU_DMA                 /* TBD */
234 #define MCD_FECTX_DMA   0x00001000 /* FEC TX ring DMA */
235 #define MCD_FECRX_DMA   0x00002000 /* FEC RX ring DMA */
236
237
238 /* these flags are valid for MCD_startDma
239  * and the chained buffer descriptors */
240 #define MCD_BUF_READY   0x80000000
241 /* indicates that this buffer is now
242  * under the DMA's control */
243 #define MCD_WRAP        0x20000000
244 /* to tell the FEC Dmas to wrap to the first BD */
245 #define MCD_INTERRUPT   0x10000000
246 /* to generate an interrupt after completion of the DMA. */
247 #define MCD_END_FRAME   0x08000000
248 /* tell the DMA to end the frame when transferring
249  * last byte of data in buffer */
250 #define MCD_CRC_RESTART 0x40000000
251 /* to empty out the accumulated checksum
252  prior to performing the DMA. */
253
254 /* Defines for the FEC buffer descriptor control/status word*/
255 #define MCD_FEC_BUF_READY   0x8000
256 #define MCD_FEC_WRAP        0x2000
257 #define MCD_FEC_INTERRUPT   0x1000
258 #define MCD_FEC_END_FRAME   0x0800
259
260
261 /*
262  * Defines for general intuitiveness
263  */
264
265 #define MCD_TRUE  1
266 #define MCD_FALSE 0
267
268 /*
269  * Three different cases for destination and source.
270  */
271 #define MINUS1          -1
272 #define ZERO            0
273 #define PLUS1           1
274
275 #ifndef DEFINESONLY
276
277 /* Task Table Entry struct*/
278 typedef struct {
279     u32 TDTstart;   /* task descriptor table start */
280     u32 TDTend;     /* task descriptor table end */
281     u32 varTab;     /* variable table start */
282     u32 FDTandFlags;    /* function descriptor table start and flags */
283     volatile u32 descAddrAndStatus;
284     volatile u32 modifiedVarTab;
285     u32 contextSaveSpace;   /* context save space start */
286     u32 literalBases;
287 } TaskTableEntry;
288
289
290 /* Chained buffer descriptor */
291 typedef volatile struct MCD_bufDesc_struct MCD_bufDesc;
292 struct MCD_bufDesc_struct {
293    u32 flags;
294 /* flags describing the DMA */
295    u32 csumResult;
296 /* checksum from checksumming performed since last checksum reset */
297    s8  *srcAddr;
298 /* the address to move data from */
299    s8  *destAddr;
300 /* the address to move data to */
301    s8  *lastDestAddr;
302 /* the last address written to */
303    u32 dmaSize;
304 /* the number of bytes to transfer independent of the transfer size */
305    MCD_bufDesc *next;
306 /* next buffer descriptor in chain */
307    u32 info;
308 /* private information about this descriptor;  DMA does not affect it */
309 };
310
311 /* Progress Query struct */
312 typedef volatile struct MCD_XferProg_struct {
313    s8 *lastSrcAddr;
314 /* the most-recent or last, post-increment source address */
315    s8 *lastDestAddr;
316 /* the most-recent or last, post-increment destination address */
317    u32  dmaSize;
318 /* the amount of data transferred for the current buffer */
319    MCD_bufDesc *currBufDesc;
320 /* pointer to the current buffer descriptor being DMAed */
321 } MCD_XferProg;
322
323
324 /* FEC buffer descriptor */
325 typedef volatile struct MCD_bufDescFec_struct {
326     u16 statCtrl;
327     u16 length;
328     u32 dataPointer;
329 } MCD_bufDescFec;
330
331
332 /*************************************************************************/
333 /*
334  * API function Prototypes  - see MCD_dmaApi.c for further notes
335  */
336
337 /*
338  * MCD_startDma starts a particular kind of DMA .
339  */
340 int MCD_startDma(
341         int channel,
342 /* the channel on which to run the DMA */
343         s8  *srcAddr,
344 /* the address to move data from, or buffer-descriptor address */
345         s16 srcIncr,
346 /* the amount to increment the source address per transfer */
347         s8  *destAddr,
348 /* the address to move data to */
349         s16 destIncr,
350 /* the amount to increment the destination address per transfer */
351         u32 dmaSize,
352 /* the number of bytes to transfer independent of the transfer size */
353         u32 xferSize,
354 /* the number bytes in of each data movement (1, 2, or 4) */
355         u32 initiator,
356 /* what device initiates the DMA */
357         int priority,
358 /* priority of the DMA */
359         u32 flags,
360 /* flags describing the DMA */
361         u32 funcDesc
362 /* a description of byte swapping, bit swapping, and CRC actions */
363 );
364
365 /*
366  * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA
367  * registers, relocating and creating the appropriate task structures, and
368  * setting up some global settings
369  */
370 int MCD_initDma(dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags);
371
372 /*
373  * MCD_dmaStatus() returns the status of the DMA on the requested channel.
374  */
375 int MCD_dmaStatus(int channel);
376
377 /*
378  * MCD_XferProgrQuery() returns progress of DMA on requested channel
379  */
380 int MCD_XferProgrQuery(int channel, MCD_XferProg *progRep);
381
382 /*
383  * MCD_killDma() halts the DMA on the requested channel, without any
384  * intention of resuming the DMA.
385  */
386 int MCD_killDma(int channel);
387
388 /*
389  * MCD_continDma() continues a DMA which as stopped due to encountering an
390  * unready buffer descriptor.
391  */
392 int MCD_continDma(int channel);
393
394 /*
395  * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is
396  * running on that channel).
397  */
398 int MCD_pauseDma(int channel);
399
400 /*
401  * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is
402  * running on that channel).
403  */
404 int MCD_resumeDma(int channel);
405
406 /*
407  * MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA
408  */
409 int MCD_csumQuery(int channel, u32 *csum);
410
411 /*
412  * MCD_getCodeSize provides the packed size required by the microcoded task
413  * and structures.
414  */
415 int MCD_getCodeSize(void);
416
417 /*
418  * MCD_getVersion provides a pointer to a version string and returns a
419  * version number.
420  */
421 int MCD_getVersion(char **longVersion);
422
423 /* macro for setting a location in the variable table */
424 #define MCD_SET_VAR(taskTab, idx, value) \
425         ((u32 *)(taskTab)->varTab)[idx] = value
426    /* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function,
427       so I'm avoiding surrounding it with "do {} while(0)" */
428
429 #endif  /* DEFINESONLY */
430
431 #endif /* _MCD_API_H */