Makefile

   1 # Makefile for QEMU.
   2
   3 # Always point to the root of the build tree (needs GNU make).
   4 BUILD_DIR=$(CURDIR)
   5
   6 # All following code might depend on configuration variables
   7 ifneq ($(wildcard config-host.mak),)
   8 # Put the all: rule here so that config-host.mak can contain dependencies.
   9 all:
  10 include config-host.mak
  11
  12 # Check that we're not trying to do an out-of-tree build from
  13 # a tree that's been used for an in-tree build.
  14 ifneq ($(realpath $(SRC_PATH)),$(realpath .))
  15 ifneq ($(wildcard $(SRC_PATH)/config-host.mak),)
  16 $(error This is an out of tree build but your source tree ($(SRC_PATH)) \
  17 seems to have been used for an in-tree build. You can fix this by running \
  18 "make distclean && rm -rf *-linux-user *-softmmu" in your source tree)
  19 endif
  20 endif
  21
  22 CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y)
  23 CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y)
  24 CONFIG_ALL=y
  25 -include config-all-devices.mak
  26 -include config-all-disas.mak
  27
  28 include $(SRC_PATH)/rules.mak
  29 config-host.mak: $(SRC_PATH)/configure
  30         @echo $@ is out-of-date, running configure
  31         @# TODO: The next lines include code which supports a smooth
  32         @# transition from old configurations without config.status.
  33         @# This code can be removed after QEMU 1.7.
  34         @if test -x config.status; then \
  35             ./config.status; \
  36         else \
  37             sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh; \
  38         fi
  39 else
  40 config-host.mak:
  41 ifneq ($(filter-out %clean,$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
  42         @echo "Please call configure before running make!"
  43         @exit 1
  44 endif
  45 endif
  46
  47 GENERATED_HEADERS = config-host.h qemu-options.def
  48 GENERATED_HEADERS += qmp-commands.h qapi-types.h qapi-visit.h
  49 GENERATED_SOURCES += qmp-marshal.c qapi-types.c qapi-visit.c
  50
  51 GENERATED_HEADERS += trace/generated-events.h
  52 GENERATED_SOURCES += trace/generated-events.c
  53
  54 GENERATED_HEADERS += trace/generated-tracers.h
  55 ifeq ($(TRACE_BACKEND),dtrace)
  56 GENERATED_HEADERS += trace/generated-tracers-dtrace.h
  57 endif
  58 GENERATED_SOURCES += trace/generated-tracers.c
  59
  60 # Don't try to regenerate Makefile or configure
  61 # We don't generate any of them
  62 Makefile: ;
  63 configure: ;
  64
  65 .PHONY: all clean cscope distclean dvi html info install install-doc \
  66         pdf recurse-all speed test dist
  67
  68 $(call set-vpath, $(SRC_PATH))
  69
  70 LIBS+=-lz $(LIBS_TOOLS)
  71
  72 HELPERS-$(CONFIG_LINUX) = qemu-bridge-helper$(EXESUF)
  73
  74 ifdef BUILD_DOCS
  75 DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8 qmp-commands.txt
  76 ifdef CONFIG_VIRTFS
  77 DOCS+=fsdev/virtfs-proxy-helper.1
  78 endif
  79 else
  80 DOCS=
  81 endif
  82
  83 SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory) BUILD_DIR=$(BUILD_DIR)
  84 SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS))
  85 SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %-config-devices.mak.d, $(TARGET_DIRS))
  86
  87 ifeq ($(SUBDIR_DEVICES_MAK),)
  88 config-all-devices.mak:
  89         $(call quiet-command,echo '# no devices' > $@,"  GEN   $@")
  90 else
  91 config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
  92         $(call quiet-command, sed -n \
  93              's|^\([^=]*\)=\(.*\)$$|\1:=$$(findstring y,$$(\1)\2)|p' \
  94              $(SUBDIR_DEVICES_MAK) | sort -u > $@, \
  95              "  GEN   $@")
  96 endif
  97
  98 -include $(SUBDIR_DEVICES_MAK_DEP)
  99
 100 %/config-devices.mak: default-configs/%.mak
 101         $(call quiet-command,$(SHELL) $(SRC_PATH)/scripts/make_device_config.sh $@ $<, "  GEN   $@")
 102         @if test -f $@; then \
 103           if cmp -s $@.old $@; then \
 104             mv $@.tmp $@; \
 105             cp -p $@ $@.old; \
 106           else \
 107             if test -f $@.old; then \
 108               echo "WARNING: $@ (user modified) out of date.";\
 109             else \
 110               echo "WARNING: $@ out of date.";\
 111             fi; \
 112             echo "Run \"make defconfig\" to regenerate."; \
 113             rm $@.tmp; \
 114           fi; \
 115          else \
 116           mv $@.tmp $@; \
 117           cp -p $@ $@.old; \
 118          fi
 119
 120 defconfig:
 121         rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)
 122
 123 ifneq ($(wildcard config-host.mak),)
 124 include $(SRC_PATH)/Makefile.objs
 125 include $(SRC_PATH)/tests/Makefile
 126 endif
 127 ifeq ($(CONFIG_SMARTCARD_NSS),y)
 128 include $(SRC_PATH)/libcacard/Makefile
 129 endif
 130
 131 all: $(DOCS) $(TOOLS) $(HELPERS-y) recurse-all
 132
 133 config-host.h: config-host.h-timestamp
 134 config-host.h-timestamp: config-host.mak
 135 qemu-options.def: $(SRC_PATH)/qemu-options.hx
 136         $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"  GEN   $@")
 137
 138 SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
 139 SOFTMMU_SUBDIR_RULES=$(filter %-softmmu,$(SUBDIR_RULES))
 140
 141 $(SOFTMMU_SUBDIR_RULES): config-all-devices.mak
 142
 143 subdir-%:
 144         $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
 145
 146 subdir-pixman: pixman/Makefile
 147         $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pixman V="$(V)" all,)
 148
 149 pixman/Makefile: $(SRC_PATH)/pixman/configure
 150         (cd pixman; CFLAGS="$(CFLAGS) -fPIC $(extra_cflags) $(extra_ldflags)" $(SRC_PATH)/pixman/configure $(AUTOCONF_HOST) --disable-gtk --disable-shared --enable-static)
 151
 152 $(SRC_PATH)/pixman/configure:
 153         (cd $(SRC_PATH)/pixman; autoreconf -v --install)
 154
 155 DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)" LIBFDT_srcdir=$(SRC_PATH)/dtc/libfdt
 156 DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS)
 157 DTC_CPPFLAGS=-I$(BUILD_DIR)/dtc -I$(SRC_PATH)/dtc -I$(SRC_PATH)/dtc/libfdt
 158
 159 subdir-dtc:dtc/libfdt dtc/tests
 160         $(call quiet-command,$(MAKE) $(DTC_MAKE_ARGS) CPPFLAGS="$(DTC_CPPFLAGS)" CFLAGS="$(DTC_CFLAGS)" LDFLAGS="$(LDFLAGS)" ARFLAGS="$(ARFLAGS)" CC="$(CC)" AR="$(AR)" LD="$(LD)" $(SUBDIR_MAKEFLAGS) libfdt/libfdt.a,)
 161
 162 dtc/%:
 163         mkdir -p $@
 164
 165 $(SUBDIR_RULES): libqemuutil.a libqemustub.a $(common-obj-y)
 166
 167 ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
 168 romsubdir-%:
 169         $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/",)
 170
 171 ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS))
 172
 173 recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
 174
 175 bt-host.o: QEMU_CFLAGS += $(BLUEZ_CFLAGS)
 176
 177 $(BUILD_DIR)/version.o: $(SRC_PATH)/version.rc $(BUILD_DIR)/config-host.h | $(BUILD_DIR)/version.lo
 178         $(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<,"  RC    version.o")
 179 $(BUILD_DIR)/version.lo: $(SRC_PATH)/version.rc $(BUILD_DIR)/config-host.h
 180         $(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<,"  RC    version.lo")
 181
 182 Makefile: $(version-obj-y) $(version-lobj-y)
 183
 184 ######################################################################
 185 # Build libraries
 186
 187 libqemustub.a: $(stub-obj-y)
 188 libqemuutil.a: $(util-obj-y) qapi-types.o qapi-visit.o
 189
 190 ######################################################################
 191
 192 qemu-img.o: qemu-img-cmds.h
 193
 194 qemu-img$(EXESUF): qemu-img.o $(block-obj-y) libqemuutil.a libqemustub.a
 195 qemu-nbd$(EXESUF): qemu-nbd.o $(block-obj-y) libqemuutil.a libqemustub.a
 196 qemu-io$(EXESUF): qemu-io.o $(block-obj-y) libqemuutil.a libqemustub.a
 197
 198 qemu-bridge-helper$(EXESUF): qemu-bridge-helper.o
 199
 200 fsdev/virtfs-proxy-helper$(EXESUF): fsdev/virtfs-proxy-helper.o fsdev/virtio-9p-marshal.o libqemuutil.a libqemustub.a
 201 fsdev/virtfs-proxy-helper$(EXESUF): LIBS += -lcap
 202
 203 qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
 204         $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"  GEN   $@")
 205
 206 qemu-ga$(EXESUF): LIBS = $(LIBS_QGA)
 207 qemu-ga$(EXESUF): QEMU_CFLAGS += -I qga/qapi-generated
 208
 209 gen-out-type = $(subst .,-,$(suffix $@))
 210
 211 qapi-py = $(SRC_PATH)/scripts/qapi.py $(SRC_PATH)/scripts/ordereddict.py
 212
 213 qga/qapi-generated/qga-qapi-types.c qga/qapi-generated/qga-qapi-types.h :\
 214 $(SRC_PATH)/qga/qapi-schema.json $(SRC_PATH)/scripts/qapi-types.py $(qapi-py)
 215         $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-types.py $(gen-out-type) -o qga/qapi-generated -p "qga-" < $<, "  GEN   $@")
 216 qga/qapi-generated/qga-qapi-visit.c qga/qapi-generated/qga-qapi-visit.h :\
 217 $(SRC_PATH)/qga/qapi-schema.json $(SRC_PATH)/scripts/qapi-visit.py $(qapi-py)
 218         $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-visit.py $(gen-out-type) -o qga/qapi-generated -p "qga-" < $<, "  GEN   $@")
 219 qga/qapi-generated/qga-qmp-commands.h qga/qapi-generated/qga-qmp-marshal.c :\
 220 $(SRC_PATH)/qga/qapi-schema.json $(SRC_PATH)/scripts/qapi-commands.py $(qapi-py)
 221         $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-commands.py $(gen-out-type) -o qga/qapi-generated -p "qga-" < $<, "  GEN   $@")
 222
 223 qapi-types.c qapi-types.h :\
 224 $(SRC_PATH)/qapi-schema.json $(SRC_PATH)/scripts/qapi-types.py $(qapi-py)
 225         $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-types.py $(gen-out-type) -o "." -b < $<, "  GEN   $@")
 226 qapi-visit.c qapi-visit.h :\
 227 $(SRC_PATH)/qapi-schema.json $(SRC_PATH)/scripts/qapi-visit.py $(qapi-py)
 228         $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-visit.py $(gen-out-type) -o "." -b < $<, "  GEN   $@")
 229 qmp-commands.h qmp-marshal.c :\
 230 $(SRC_PATH)/qapi-schema.json $(SRC_PATH)/scripts/qapi-commands.py $(qapi-py)
 231         $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-commands.py $(gen-out-type) -m -o "." < $<, "  GEN   $@")
 232
 233 QGALIB_GEN=$(addprefix qga/qapi-generated/, qga-qapi-types.h qga-qapi-visit.h qga-qmp-commands.h)
 234 $(qga-obj-y) qemu-ga.o: $(QGALIB_GEN)
 235
 236 qemu-ga$(EXESUF): $(qga-obj-y) libqemuutil.a libqemustub.a
 237         $(call LINK, $^)
 238
 239 clean:
 240 # avoid old build problems by removing potentially incorrect old files
 241         rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
 242         rm -f qemu-options.def
 243         find . -name '*.[oda]' -type f -exec rm -f {} +
 244         find . -name '*.l[oa]' -type f -exec rm -f {} +
 245         rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) qemu-ga TAGS cscope.* *.pod *~ */*~
 246         rm -f fsdev/*.pod
 247         rm -rf .libs */.libs
 248         rm -f qemu-img-cmds.h
 249         @# May not be present in GENERATED_HEADERS
 250         rm -f trace/generated-tracers-dtrace.dtrace*
 251         rm -f trace/generated-tracers-dtrace.h*
 252         rm -f $(foreach f,$(GENERATED_HEADERS),$(f) $(f)-timestamp)
 253         rm -f $(foreach f,$(GENERATED_SOURCES),$(f) $(f)-timestamp)
 254         rm -rf qapi-generated
 255         rm -rf qga/qapi-generated
 256         for d in $(ALL_SUBDIRS); do \
 257         if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
 258         rm -f $$d/qemu-options.def; \
 259         done
 260
 261 VERSION ?= $(shell cat VERSION)
 262
 263 dist: qemu-$(VERSION).tar.bz2
 264
 265 qemu-%.tar.bz2:
 266         $(SRC_PATH)/scripts/make-release "$(SRC_PATH)" "$(patsubst qemu-%.tar.bz2,%,$@)"
 267
 268 distclean: clean
 269         rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi
 270         rm -f config-all-devices.mak config-all-disas.mak
 271         rm -f po/*.mo
 272         rm -f roms/seabios/config.mak roms/vgabios/config.mak
 273         rm -f qemu-doc.info qemu-doc.aux qemu-doc.cp qemu-doc.cps qemu-doc.dvi
 274         rm -f qemu-doc.fn qemu-doc.fns qemu-doc.info qemu-doc.ky qemu-doc.kys
 275         rm -f qemu-doc.log qemu-doc.pdf qemu-doc.pg qemu-doc.toc qemu-doc.tp
 276         rm -f qemu-doc.vr
 277         rm -f config.log
 278         rm -f linux-headers/asm
 279         rm -f qemu-tech.info qemu-tech.aux qemu-tech.cp qemu-tech.dvi qemu-tech.fn qemu-tech.info qemu-tech.ky qemu-tech.log qemu-tech.pdf qemu-tech.pg qemu-tech.toc qemu-tech.tp qemu-tech.vr
 280         for d in $(TARGET_DIRS); do \
 281         rm -rf $$d || exit 1 ; \
 282         done
 283         rm -Rf .sdk
 284         if test -f pixman/config.log; then make -C pixman distclean; fi
 285         if test -f dtc/version_gen.h; then make $(DTC_MAKE_ARGS) clean; fi
 286
 287 KEYMAPS=da     en-gb  et  fr     fr-ch  is  lt  modifiers  no  pt-br  sv \
 288 ar      de     en-us  fi  fr-be  hr     it  lv  nl         pl  ru     th \
 289 common  de-ch  es     fo  fr-ca  hu     ja  mk  nl-be      pt  sl     tr \
 290 bepo    cz
 291
 292 ifdef INSTALL_BLOBS
 293 BLOBS=bios.bin sgabios.bin vgabios.bin vgabios-cirrus.bin \
 294 vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin \
 295 acpi-dsdt.aml q35-acpi-dsdt.aml \
 296 ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc QEMU,tcx.bin \
 297 pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \
 298 pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \
 299 efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
 300 efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
 301 qemu-icon.bmp qemu_logo_no_text.svg \
 302 bamboo.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
 303 multiboot.bin linuxboot.bin kvmvapic.bin \
 304 s390-zipl.rom \
 305 s390-ccw.img \
 306 spapr-rtas.bin slof.bin \
 307 palcode-clipper
 308 else
 309 BLOBS=
 310 endif
 311
 312 install-doc: $(DOCS)
 313         $(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)"
 314         $(INSTALL_DATA) qemu-doc.html  qemu-tech.html "$(DESTDIR)$(qemu_docdir)"
 315         $(INSTALL_DATA) qmp-commands.txt "$(DESTDIR)$(qemu_docdir)"
 316 ifdef CONFIG_POSIX
 317         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
 318         $(INSTALL_DATA) qemu.1 "$(DESTDIR)$(mandir)/man1"
 319 ifneq ($(TOOLS),)
 320         $(INSTALL_DATA) qemu-img.1 "$(DESTDIR)$(mandir)/man1"
 321         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
 322         $(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
 323 endif
 324 endif
 325 ifdef CONFIG_VIRTFS
 326         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
 327         $(INSTALL_DATA) fsdev/virtfs-proxy-helper.1 "$(DESTDIR)$(mandir)/man1"
 328 endif
 329
 330 install-datadir:
 331         $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)"
 332
 333 install-localstatedir:
 334 ifdef CONFIG_POSIX
 335 ifneq (,$(findstring qemu-ga,$(TOOLS)))
 336         $(INSTALL_DIR) "$(DESTDIR)$(qemu_localstatedir)"/run
 337 endif
 338 endif
 339
 340 install-confdir:
 341         $(INSTALL_DIR) "$(DESTDIR)$(qemu_confdir)"
 342
 343 install-sysconfig: install-datadir install-confdir
 344         $(INSTALL_DATA) $(SRC_PATH)/sysconfigs/target/target-x86_64.conf "$(DESTDIR)$(qemu_confdir)"
 345
 346 install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig \
 347 install-datadir install-localstatedir
 348         $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
 349 ifneq ($(TOOLS),)
 350         $(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
 351 endif
 352 ifneq ($(HELPERS-y),)
 353         $(INSTALL_DIR) "$(DESTDIR)$(libexecdir)"
 354         $(INSTALL_PROG) $(STRIP_OPT) $(HELPERS-y) "$(DESTDIR)$(libexecdir)"
 355 endif
 356 ifneq ($(BLOBS),)
 357         set -e; for x in $(BLOBS); do \
 358                 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(qemu_datadir)"; \
 359         done
 360 endif
 361 ifeq ($(CONFIG_GTK),y)
 362         $(MAKE) -C po $@
 363 endif
 364         $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/keymaps"
 365         set -e; for x in $(KEYMAPS); do \
 366                 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(qemu_datadir)/keymaps"; \
 367         done
 368         for d in $(TARGET_DIRS); do \
 369         $(MAKE) -C $$d $@ || exit 1 ; \
 370         done
 371
 372 # various test targets
 373 test speed: all
 374         $(MAKE) -C tests/tcg $@
 375
 376 .PHONY: TAGS
 377 TAGS:
 378         rm -f $@
 379         find "$(SRC_PATH)" -name '*.[hc]' -exec etags --append {} +
 380
 381 cscope:
 382         rm -f ./cscope.*
 383         find "$(SRC_PATH)" -name "*.[chsS]" -print | sed 's,^\./,,' > ./cscope.files
 384         cscope -b
 385
 386 # documentation
 387 MAKEINFO=makeinfo
 388 MAKEINFOFLAGS=--no-headers --no-split --number-sections
 389 TEXIFLAG=$(if $(V),,--quiet)
 390 %.dvi: %.texi
 391         $(call quiet-command,texi2dvi $(TEXIFLAG) -I . $<,"  GEN   $@")
 392
 393 %.html: %.texi
 394         $(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --html $< -o $@, \
 395         "  GEN   $@")
 396
 397 %.info: %.texi
 398         $(call quiet-command,$(MAKEINFO) $< -o $@,"  GEN   $@")
 399
 400 %.pdf: %.texi
 401         $(call quiet-command,texi2pdf $(TEXIFLAG) -I . $<,"  GEN   $@")
 402
 403 qemu-options.texi: $(SRC_PATH)/qemu-options.hx
 404         $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"  GEN   $@")
 405
 406 qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx
 407         $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"  GEN   $@")
 408
 409 qmp-commands.txt: $(SRC_PATH)/qmp-commands.hx
 410         $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -q < $< > $@,"  GEN   $@")
 411
 412 qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
 413         $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"  GEN   $@")
 414
 415 qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi
 416         $(call quiet-command, \
 417           perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu.pod && \
 418           $(POD2MAN) --section=1 --center=" " --release=" " qemu.pod > $@, \
 419           "  GEN   $@")
 420
 421 qemu-img.1: qemu-img.texi qemu-img-cmds.texi
 422         $(call quiet-command, \
 423           perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-img.pod && \
 424           $(POD2MAN) --section=1 --center=" " --release=" " qemu-img.pod > $@, \
 425           "  GEN   $@")
 426
 427 fsdev/virtfs-proxy-helper.1: fsdev/virtfs-proxy-helper.texi
 428         $(call quiet-command, \
 429           perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< fsdev/virtfs-proxy-helper.pod && \
 430           $(POD2MAN) --section=1 --center=" " --release=" " fsdev/virtfs-proxy-helper.pod > $@, \
 431           "  GEN   $@")
 432
 433 qemu-nbd.8: qemu-nbd.texi
 434         $(call quiet-command, \
 435           perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-nbd.pod && \
 436           $(POD2MAN) --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
 437           "  GEN   $@")
 438
 439 dvi: qemu-doc.dvi qemu-tech.dvi
 440 html: qemu-doc.html qemu-tech.html
 441 info: qemu-doc.info qemu-tech.info
 442 pdf: qemu-doc.pdf qemu-tech.pdf
 443
 444 qemu-doc.dvi qemu-doc.html qemu-doc.info qemu-doc.pdf: \
 445         qemu-img.texi qemu-nbd.texi qemu-options.texi \
 446         qemu-monitor.texi qemu-img-cmds.texi
 447
 448 ifdef CONFIG_WIN32
 449
 450 INSTALLER = qemu-setup-$(VERSION)$(EXESUF)
 451
 452 nsisflags = -V2 -NOCD
 453
 454 ifneq ($(wildcard $(SRC_PATH)/dll),)
 455 ifeq ($(ARCH),x86_64)
 456 # 64 bit executables
 457 DLL_PATH = $(SRC_PATH)/dll/w64
 458 nsisflags += -DW64
 459 else
 460 # 32 bit executables
 461 DLL_PATH = $(SRC_PATH)/dll/w32
 462 endif
 463 endif
 464
 465 .PHONY: installer
 466 installer: $(INSTALLER)
 467
 468 INSTDIR=/tmp/qemu-nsis
 469
 470 $(INSTALLER): $(SRC_PATH)/qemu.nsi
 471         make install prefix=${INSTDIR}
 472 ifdef SIGNCODE
 473         (cd ${INSTDIR}; \
 474          for i in *.exe; do \
 475            $(SIGNCODE) $${i}; \
 476          done \
 477         )
 478 endif # SIGNCODE
 479         (cd ${INSTDIR}; \
 480          for i in qemu-system-*.exe; do \
 481            arch=$${i%.exe}; \
 482            arch=$${arch#qemu-system-}; \
 483            echo Section \"$$arch\" Section_$$arch; \
 484            echo SetOutPath \"\$$INSTDIR\"; \
 485            echo File \"\$${BINDIR}\\$$i\"; \
 486            echo SectionEnd; \
 487          done \
 488         ) >${INSTDIR}/system-emulations.nsh
 489         makensis $(nsisflags) \
 490                 $(if $(BUILD_DOCS),-DCONFIG_DOCUMENTATION="y") \
 491                 $(if $(CONFIG_GTK),-DCONFIG_GTK="y") \
 492                 -DBINDIR="${INSTDIR}" \
 493                 $(if $(DLL_PATH),-DDLLDIR="$(DLL_PATH)") \
 494                 -DSRCDIR="$(SRC_PATH)" \
 495                 -DOUTFILE="$(INSTALLER)" \
 496                 $(SRC_PATH)/qemu.nsi
 497         rm -r ${INSTDIR}
 498 ifdef SIGNCODE
 499         $(SIGNCODE) $(INSTALLER)
 500 endif # SIGNCODE
 501 endif # CONFIG_WIN
 502
 503 # Add a dependency on the generated files, so that they are always
 504 # rebuilt before other object files
 505 ifneq ($(filter-out %clean,$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
 506 Makefile: $(GENERATED_HEADERS)
 507 endif
 508
 509 # Include automatically generated dependency files
 510 # Dependencies in Makefile.objs files come from our recursive subdir rules
 511 -include $(wildcard *.d tests/*.d)