]> rtime.felk.cvut.cz Git - lisovros/qemu_apohw.git/blob - block.c
pc: acpi: generate AML only for PCI0 devices if PCI bridge hotplug is disabled
[lisovros/qemu_apohw.git] / block.c
1 /*
2  * QEMU System Emulator block driver
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "block/block_int.h"
28 #include "block/blockjob.h"
29 #include "qemu/module.h"
30 #include "qapi/qmp/qjson.h"
31 #include "sysemu/sysemu.h"
32 #include "qemu/notify.h"
33 #include "block/coroutine.h"
34 #include "block/qapi.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
37 #include "qapi-event.h"
38
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
48
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
52
53 struct BdrvDirtyBitmap {
54     HBitmap *bitmap;
55     QLIST_ENTRY(BdrvDirtyBitmap) list;
56 };
57
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
59
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63         BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66         BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68                                          int64_t sector_num, int nb_sectors,
69                                          QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71                                          int64_t sector_num, int nb_sectors,
72                                          QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75     BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78     BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80                                                int64_t sector_num,
81                                                QEMUIOVector *qiov,
82                                                int nb_sectors,
83                                                BdrvRequestFlags flags,
84                                                BlockDriverCompletionFunc *cb,
85                                                void *opaque,
86                                                bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89     int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
90
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92     QTAILQ_HEAD_INITIALIZER(bdrv_states);
93
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95     QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
96
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98     QLIST_HEAD_INITIALIZER(bdrv_drivers);
99
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
102
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
105 {
106     return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107              (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108             filename[1] == ':');
109 }
110
111 int is_windows_drive(const char *filename)
112 {
113     if (is_windows_drive_prefix(filename) &&
114         filename[2] == '\0')
115         return 1;
116     if (strstart(filename, "\\\\.\\", NULL) ||
117         strstart(filename, "//./", NULL))
118         return 1;
119     return 0;
120 }
121 #endif
122
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125                         ThrottleConfig *cfg)
126 {
127     int i;
128
129     throttle_config(&bs->throttle_state, cfg);
130
131     for (i = 0; i < 2; i++) {
132         qemu_co_enter_next(&bs->throttled_reqs[i]);
133     }
134 }
135
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
138 {
139     bool drained = false;
140     bool enabled = bs->io_limits_enabled;
141     int i;
142
143     bs->io_limits_enabled = false;
144
145     for (i = 0; i < 2; i++) {
146         while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147             drained = true;
148         }
149     }
150
151     bs->io_limits_enabled = enabled;
152
153     return drained;
154 }
155
156 void bdrv_io_limits_disable(BlockDriverState *bs)
157 {
158     bs->io_limits_enabled = false;
159
160     bdrv_start_throttled_reqs(bs);
161
162     throttle_destroy(&bs->throttle_state);
163 }
164
165 static void bdrv_throttle_read_timer_cb(void *opaque)
166 {
167     BlockDriverState *bs = opaque;
168     qemu_co_enter_next(&bs->throttled_reqs[0]);
169 }
170
171 static void bdrv_throttle_write_timer_cb(void *opaque)
172 {
173     BlockDriverState *bs = opaque;
174     qemu_co_enter_next(&bs->throttled_reqs[1]);
175 }
176
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
179 {
180     assert(!bs->io_limits_enabled);
181     throttle_init(&bs->throttle_state,
182                   bdrv_get_aio_context(bs),
183                   QEMU_CLOCK_VIRTUAL,
184                   bdrv_throttle_read_timer_cb,
185                   bdrv_throttle_write_timer_cb,
186                   bs);
187     bs->io_limits_enabled = true;
188 }
189
190 /* This function makes an IO wait if needed
191  *
192  * @nb_sectors: the number of sectors of the IO
193  * @is_write:   is the IO a write
194  */
195 static void bdrv_io_limits_intercept(BlockDriverState *bs,
196                                      unsigned int bytes,
197                                      bool is_write)
198 {
199     /* does this io must wait */
200     bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
201
202     /* if must wait or any request of this type throttled queue the IO */
203     if (must_wait ||
204         !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
205         qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
206     }
207
208     /* the IO will be executed, do the accounting */
209     throttle_account(&bs->throttle_state, is_write, bytes);
210
211
212     /* if the next request must wait -> do nothing */
213     if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
214         return;
215     }
216
217     /* else queue next request for execution */
218     qemu_co_queue_next(&bs->throttled_reqs[is_write]);
219 }
220
221 size_t bdrv_opt_mem_align(BlockDriverState *bs)
222 {
223     if (!bs || !bs->drv) {
224         /* 4k should be on the safe side */
225         return 4096;
226     }
227
228     return bs->bl.opt_mem_alignment;
229 }
230
231 /* check if the path starts with "<protocol>:" */
232 static int path_has_protocol(const char *path)
233 {
234     const char *p;
235
236 #ifdef _WIN32
237     if (is_windows_drive(path) ||
238         is_windows_drive_prefix(path)) {
239         return 0;
240     }
241     p = path + strcspn(path, ":/\\");
242 #else
243     p = path + strcspn(path, ":/");
244 #endif
245
246     return *p == ':';
247 }
248
249 int path_is_absolute(const char *path)
250 {
251 #ifdef _WIN32
252     /* specific case for names like: "\\.\d:" */
253     if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
254         return 1;
255     }
256     return (*path == '/' || *path == '\\');
257 #else
258     return (*path == '/');
259 #endif
260 }
261
262 /* if filename is absolute, just copy it to dest. Otherwise, build a
263    path to it by considering it is relative to base_path. URL are
264    supported. */
265 void path_combine(char *dest, int dest_size,
266                   const char *base_path,
267                   const char *filename)
268 {
269     const char *p, *p1;
270     int len;
271
272     if (dest_size <= 0)
273         return;
274     if (path_is_absolute(filename)) {
275         pstrcpy(dest, dest_size, filename);
276     } else {
277         p = strchr(base_path, ':');
278         if (p)
279             p++;
280         else
281             p = base_path;
282         p1 = strrchr(base_path, '/');
283 #ifdef _WIN32
284         {
285             const char *p2;
286             p2 = strrchr(base_path, '\\');
287             if (!p1 || p2 > p1)
288                 p1 = p2;
289         }
290 #endif
291         if (p1)
292             p1++;
293         else
294             p1 = base_path;
295         if (p1 > p)
296             p = p1;
297         len = p - base_path;
298         if (len > dest_size - 1)
299             len = dest_size - 1;
300         memcpy(dest, base_path, len);
301         dest[len] = '\0';
302         pstrcat(dest, dest_size, filename);
303     }
304 }
305
306 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
307 {
308     if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
309         pstrcpy(dest, sz, bs->backing_file);
310     } else {
311         path_combine(dest, sz, bs->filename, bs->backing_file);
312     }
313 }
314
315 void bdrv_register(BlockDriver *bdrv)
316 {
317     /* Block drivers without coroutine functions need emulation */
318     if (!bdrv->bdrv_co_readv) {
319         bdrv->bdrv_co_readv = bdrv_co_readv_em;
320         bdrv->bdrv_co_writev = bdrv_co_writev_em;
321
322         /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
323          * the block driver lacks aio we need to emulate that too.
324          */
325         if (!bdrv->bdrv_aio_readv) {
326             /* add AIO emulation layer */
327             bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
328             bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
329         }
330     }
331
332     QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
333 }
334
335 /* create a new block device (by default it is empty) */
336 BlockDriverState *bdrv_new(const char *device_name, Error **errp)
337 {
338     BlockDriverState *bs;
339     int i;
340
341     if (bdrv_find(device_name)) {
342         error_setg(errp, "Device with id '%s' already exists",
343                    device_name);
344         return NULL;
345     }
346     if (bdrv_find_node(device_name)) {
347         error_setg(errp, "Device with node-name '%s' already exists",
348                    device_name);
349         return NULL;
350     }
351
352     bs = g_malloc0(sizeof(BlockDriverState));
353     QLIST_INIT(&bs->dirty_bitmaps);
354     pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
355     if (device_name[0] != '\0') {
356         QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
357     }
358     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
359         QLIST_INIT(&bs->op_blockers[i]);
360     }
361     bdrv_iostatus_disable(bs);
362     notifier_list_init(&bs->close_notifiers);
363     notifier_with_return_list_init(&bs->before_write_notifiers);
364     qemu_co_queue_init(&bs->throttled_reqs[0]);
365     qemu_co_queue_init(&bs->throttled_reqs[1]);
366     bs->refcnt = 1;
367     bs->aio_context = qemu_get_aio_context();
368
369     return bs;
370 }
371
372 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
373 {
374     notifier_list_add(&bs->close_notifiers, notify);
375 }
376
377 BlockDriver *bdrv_find_format(const char *format_name)
378 {
379     BlockDriver *drv1;
380     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
381         if (!strcmp(drv1->format_name, format_name)) {
382             return drv1;
383         }
384     }
385     return NULL;
386 }
387
388 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
389 {
390     static const char *whitelist_rw[] = {
391         CONFIG_BDRV_RW_WHITELIST
392     };
393     static const char *whitelist_ro[] = {
394         CONFIG_BDRV_RO_WHITELIST
395     };
396     const char **p;
397
398     if (!whitelist_rw[0] && !whitelist_ro[0]) {
399         return 1;               /* no whitelist, anything goes */
400     }
401
402     for (p = whitelist_rw; *p; p++) {
403         if (!strcmp(drv->format_name, *p)) {
404             return 1;
405         }
406     }
407     if (read_only) {
408         for (p = whitelist_ro; *p; p++) {
409             if (!strcmp(drv->format_name, *p)) {
410                 return 1;
411             }
412         }
413     }
414     return 0;
415 }
416
417 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
418                                           bool read_only)
419 {
420     BlockDriver *drv = bdrv_find_format(format_name);
421     return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
422 }
423
424 typedef struct CreateCo {
425     BlockDriver *drv;
426     char *filename;
427     QemuOpts *opts;
428     int ret;
429     Error *err;
430 } CreateCo;
431
432 static void coroutine_fn bdrv_create_co_entry(void *opaque)
433 {
434     Error *local_err = NULL;
435     int ret;
436
437     CreateCo *cco = opaque;
438     assert(cco->drv);
439
440     ret = cco->drv->bdrv_create(cco->filename, cco->opts, &local_err);
441     if (local_err) {
442         error_propagate(&cco->err, local_err);
443     }
444     cco->ret = ret;
445 }
446
447 int bdrv_create(BlockDriver *drv, const char* filename,
448                 QemuOpts *opts, Error **errp)
449 {
450     int ret;
451
452     Coroutine *co;
453     CreateCo cco = {
454         .drv = drv,
455         .filename = g_strdup(filename),
456         .opts = opts,
457         .ret = NOT_DONE,
458         .err = NULL,
459     };
460
461     if (!drv->bdrv_create) {
462         error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
463         ret = -ENOTSUP;
464         goto out;
465     }
466
467     if (qemu_in_coroutine()) {
468         /* Fast-path if already in coroutine context */
469         bdrv_create_co_entry(&cco);
470     } else {
471         co = qemu_coroutine_create(bdrv_create_co_entry);
472         qemu_coroutine_enter(co, &cco);
473         while (cco.ret == NOT_DONE) {
474             aio_poll(qemu_get_aio_context(), true);
475         }
476     }
477
478     ret = cco.ret;
479     if (ret < 0) {
480         if (cco.err) {
481             error_propagate(errp, cco.err);
482         } else {
483             error_setg_errno(errp, -ret, "Could not create image");
484         }
485     }
486
487 out:
488     g_free(cco.filename);
489     return ret;
490 }
491
492 int bdrv_create_file(const char *filename, QemuOpts *opts, Error **errp)
493 {
494     BlockDriver *drv;
495     Error *local_err = NULL;
496     int ret;
497
498     drv = bdrv_find_protocol(filename, true);
499     if (drv == NULL) {
500         error_setg(errp, "Could not find protocol for file '%s'", filename);
501         return -ENOENT;
502     }
503
504     ret = bdrv_create(drv, filename, opts, &local_err);
505     if (local_err) {
506         error_propagate(errp, local_err);
507     }
508     return ret;
509 }
510
511 void bdrv_refresh_limits(BlockDriverState *bs, Error **errp)
512 {
513     BlockDriver *drv = bs->drv;
514     Error *local_err = NULL;
515
516     memset(&bs->bl, 0, sizeof(bs->bl));
517
518     if (!drv) {
519         return;
520     }
521
522     /* Take some limits from the children as a default */
523     if (bs->file) {
524         bdrv_refresh_limits(bs->file, &local_err);
525         if (local_err) {
526             error_propagate(errp, local_err);
527             return;
528         }
529         bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
530         bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
531     } else {
532         bs->bl.opt_mem_alignment = 512;
533     }
534
535     if (bs->backing_hd) {
536         bdrv_refresh_limits(bs->backing_hd, &local_err);
537         if (local_err) {
538             error_propagate(errp, local_err);
539             return;
540         }
541         bs->bl.opt_transfer_length =
542             MAX(bs->bl.opt_transfer_length,
543                 bs->backing_hd->bl.opt_transfer_length);
544         bs->bl.opt_mem_alignment =
545             MAX(bs->bl.opt_mem_alignment,
546                 bs->backing_hd->bl.opt_mem_alignment);
547     }
548
549     /* Then let the driver override it */
550     if (drv->bdrv_refresh_limits) {
551         drv->bdrv_refresh_limits(bs, errp);
552     }
553 }
554
555 /*
556  * Create a uniquely-named empty temporary file.
557  * Return 0 upon success, otherwise a negative errno value.
558  */
559 int get_tmp_filename(char *filename, int size)
560 {
561 #ifdef _WIN32
562     char temp_dir[MAX_PATH];
563     /* GetTempFileName requires that its output buffer (4th param)
564        have length MAX_PATH or greater.  */
565     assert(size >= MAX_PATH);
566     return (GetTempPath(MAX_PATH, temp_dir)
567             && GetTempFileName(temp_dir, "qem", 0, filename)
568             ? 0 : -GetLastError());
569 #else
570     int fd;
571     const char *tmpdir;
572     tmpdir = getenv("TMPDIR");
573     if (!tmpdir) {
574         tmpdir = "/var/tmp";
575     }
576     if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
577         return -EOVERFLOW;
578     }
579     fd = mkstemp(filename);
580     if (fd < 0) {
581         return -errno;
582     }
583     if (close(fd) != 0) {
584         unlink(filename);
585         return -errno;
586     }
587     return 0;
588 #endif
589 }
590
591 /*
592  * Detect host devices. By convention, /dev/cdrom[N] is always
593  * recognized as a host CDROM.
594  */
595 static BlockDriver *find_hdev_driver(const char *filename)
596 {
597     int score_max = 0, score;
598     BlockDriver *drv = NULL, *d;
599
600     QLIST_FOREACH(d, &bdrv_drivers, list) {
601         if (d->bdrv_probe_device) {
602             score = d->bdrv_probe_device(filename);
603             if (score > score_max) {
604                 score_max = score;
605                 drv = d;
606             }
607         }
608     }
609
610     return drv;
611 }
612
613 BlockDriver *bdrv_find_protocol(const char *filename,
614                                 bool allow_protocol_prefix)
615 {
616     BlockDriver *drv1;
617     char protocol[128];
618     int len;
619     const char *p;
620
621     /* TODO Drivers without bdrv_file_open must be specified explicitly */
622
623     /*
624      * XXX(hch): we really should not let host device detection
625      * override an explicit protocol specification, but moving this
626      * later breaks access to device names with colons in them.
627      * Thanks to the brain-dead persistent naming schemes on udev-
628      * based Linux systems those actually are quite common.
629      */
630     drv1 = find_hdev_driver(filename);
631     if (drv1) {
632         return drv1;
633     }
634
635     if (!path_has_protocol(filename) || !allow_protocol_prefix) {
636         return bdrv_find_format("file");
637     }
638
639     p = strchr(filename, ':');
640     assert(p != NULL);
641     len = p - filename;
642     if (len > sizeof(protocol) - 1)
643         len = sizeof(protocol) - 1;
644     memcpy(protocol, filename, len);
645     protocol[len] = '\0';
646     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
647         if (drv1->protocol_name &&
648             !strcmp(drv1->protocol_name, protocol)) {
649             return drv1;
650         }
651     }
652     return NULL;
653 }
654
655 static int find_image_format(BlockDriverState *bs, const char *filename,
656                              BlockDriver **pdrv, Error **errp)
657 {
658     int score, score_max;
659     BlockDriver *drv1, *drv;
660     uint8_t buf[2048];
661     int ret = 0;
662
663     /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
664     if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
665         drv = bdrv_find_format("raw");
666         if (!drv) {
667             error_setg(errp, "Could not find raw image format");
668             ret = -ENOENT;
669         }
670         *pdrv = drv;
671         return ret;
672     }
673
674     ret = bdrv_pread(bs, 0, buf, sizeof(buf));
675     if (ret < 0) {
676         error_setg_errno(errp, -ret, "Could not read image for determining its "
677                          "format");
678         *pdrv = NULL;
679         return ret;
680     }
681
682     score_max = 0;
683     drv = NULL;
684     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
685         if (drv1->bdrv_probe) {
686             score = drv1->bdrv_probe(buf, ret, filename);
687             if (score > score_max) {
688                 score_max = score;
689                 drv = drv1;
690             }
691         }
692     }
693     if (!drv) {
694         error_setg(errp, "Could not determine image format: No compatible "
695                    "driver found");
696         ret = -ENOENT;
697     }
698     *pdrv = drv;
699     return ret;
700 }
701
702 /**
703  * Set the current 'total_sectors' value
704  */
705 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
706 {
707     BlockDriver *drv = bs->drv;
708
709     /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
710     if (bs->sg)
711         return 0;
712
713     /* query actual device if possible, otherwise just trust the hint */
714     if (drv->bdrv_getlength) {
715         int64_t length = drv->bdrv_getlength(bs);
716         if (length < 0) {
717             return length;
718         }
719         hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
720     }
721
722     bs->total_sectors = hint;
723     return 0;
724 }
725
726 /**
727  * Set open flags for a given discard mode
728  *
729  * Return 0 on success, -1 if the discard mode was invalid.
730  */
731 int bdrv_parse_discard_flags(const char *mode, int *flags)
732 {
733     *flags &= ~BDRV_O_UNMAP;
734
735     if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
736         /* do nothing */
737     } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
738         *flags |= BDRV_O_UNMAP;
739     } else {
740         return -1;
741     }
742
743     return 0;
744 }
745
746 /**
747  * Set open flags for a given cache mode
748  *
749  * Return 0 on success, -1 if the cache mode was invalid.
750  */
751 int bdrv_parse_cache_flags(const char *mode, int *flags)
752 {
753     *flags &= ~BDRV_O_CACHE_MASK;
754
755     if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
756         *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
757     } else if (!strcmp(mode, "directsync")) {
758         *flags |= BDRV_O_NOCACHE;
759     } else if (!strcmp(mode, "writeback")) {
760         *flags |= BDRV_O_CACHE_WB;
761     } else if (!strcmp(mode, "unsafe")) {
762         *flags |= BDRV_O_CACHE_WB;
763         *flags |= BDRV_O_NO_FLUSH;
764     } else if (!strcmp(mode, "writethrough")) {
765         /* this is the default */
766     } else {
767         return -1;
768     }
769
770     return 0;
771 }
772
773 /**
774  * The copy-on-read flag is actually a reference count so multiple users may
775  * use the feature without worrying about clobbering its previous state.
776  * Copy-on-read stays enabled until all users have called to disable it.
777  */
778 void bdrv_enable_copy_on_read(BlockDriverState *bs)
779 {
780     bs->copy_on_read++;
781 }
782
783 void bdrv_disable_copy_on_read(BlockDriverState *bs)
784 {
785     assert(bs->copy_on_read > 0);
786     bs->copy_on_read--;
787 }
788
789 /*
790  * Returns the flags that a temporary snapshot should get, based on the
791  * originally requested flags (the originally requested image will have flags
792  * like a backing file)
793  */
794 static int bdrv_temp_snapshot_flags(int flags)
795 {
796     return (flags & ~BDRV_O_SNAPSHOT) | BDRV_O_TEMPORARY;
797 }
798
799 /*
800  * Returns the flags that bs->file should get, based on the given flags for
801  * the parent BDS
802  */
803 static int bdrv_inherited_flags(int flags)
804 {
805     /* Enable protocol handling, disable format probing for bs->file */
806     flags |= BDRV_O_PROTOCOL;
807
808     /* Our block drivers take care to send flushes and respect unmap policy,
809      * so we can enable both unconditionally on lower layers. */
810     flags |= BDRV_O_CACHE_WB | BDRV_O_UNMAP;
811
812     /* Clear flags that only apply to the top layer */
813     flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ);
814
815     return flags;
816 }
817
818 /*
819  * Returns the flags that bs->backing_hd should get, based on the given flags
820  * for the parent BDS
821  */
822 static int bdrv_backing_flags(int flags)
823 {
824     /* backing files always opened read-only */
825     flags &= ~(BDRV_O_RDWR | BDRV_O_COPY_ON_READ);
826
827     /* snapshot=on is handled on the top layer */
828     flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_TEMPORARY);
829
830     return flags;
831 }
832
833 static int bdrv_open_flags(BlockDriverState *bs, int flags)
834 {
835     int open_flags = flags | BDRV_O_CACHE_WB;
836
837     /*
838      * Clear flags that are internal to the block layer before opening the
839      * image.
840      */
841     open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_PROTOCOL);
842
843     /*
844      * Snapshots should be writable.
845      */
846     if (flags & BDRV_O_TEMPORARY) {
847         open_flags |= BDRV_O_RDWR;
848     }
849
850     return open_flags;
851 }
852
853 static void bdrv_assign_node_name(BlockDriverState *bs,
854                                   const char *node_name,
855                                   Error **errp)
856 {
857     if (!node_name) {
858         return;
859     }
860
861     /* empty string node name is invalid */
862     if (node_name[0] == '\0') {
863         error_setg(errp, "Empty node name");
864         return;
865     }
866
867     /* takes care of avoiding namespaces collisions */
868     if (bdrv_find(node_name)) {
869         error_setg(errp, "node-name=%s is conflicting with a device id",
870                    node_name);
871         return;
872     }
873
874     /* takes care of avoiding duplicates node names */
875     if (bdrv_find_node(node_name)) {
876         error_setg(errp, "Duplicate node name");
877         return;
878     }
879
880     /* copy node name into the bs and insert it into the graph list */
881     pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
882     QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
883 }
884
885 /*
886  * Common part for opening disk images and files
887  *
888  * Removes all processed options from *options.
889  */
890 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
891     QDict *options, int flags, BlockDriver *drv, Error **errp)
892 {
893     int ret, open_flags;
894     const char *filename;
895     const char *node_name = NULL;
896     Error *local_err = NULL;
897
898     assert(drv != NULL);
899     assert(bs->file == NULL);
900     assert(options != NULL && bs->options != options);
901
902     if (file != NULL) {
903         filename = file->filename;
904     } else {
905         filename = qdict_get_try_str(options, "filename");
906     }
907
908     if (drv->bdrv_needs_filename && !filename) {
909         error_setg(errp, "The '%s' block driver requires a file name",
910                    drv->format_name);
911         return -EINVAL;
912     }
913
914     trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
915
916     node_name = qdict_get_try_str(options, "node-name");
917     bdrv_assign_node_name(bs, node_name, &local_err);
918     if (local_err) {
919         error_propagate(errp, local_err);
920         return -EINVAL;
921     }
922     qdict_del(options, "node-name");
923
924     /* bdrv_open() with directly using a protocol as drv. This layer is already
925      * opened, so assign it to bs (while file becomes a closed BlockDriverState)
926      * and return immediately. */
927     if (file != NULL && drv->bdrv_file_open) {
928         bdrv_swap(file, bs);
929         return 0;
930     }
931
932     bs->open_flags = flags;
933     bs->guest_block_size = 512;
934     bs->request_alignment = 512;
935     bs->zero_beyond_eof = true;
936     open_flags = bdrv_open_flags(bs, flags);
937     bs->read_only = !(open_flags & BDRV_O_RDWR);
938     bs->growable = !!(flags & BDRV_O_PROTOCOL);
939
940     if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
941         error_setg(errp,
942                    !bs->read_only && bdrv_is_whitelisted(drv, true)
943                         ? "Driver '%s' can only be used for read-only devices"
944                         : "Driver '%s' is not whitelisted",
945                    drv->format_name);
946         return -ENOTSUP;
947     }
948
949     assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
950     if (flags & BDRV_O_COPY_ON_READ) {
951         if (!bs->read_only) {
952             bdrv_enable_copy_on_read(bs);
953         } else {
954             error_setg(errp, "Can't use copy-on-read on read-only device");
955             return -EINVAL;
956         }
957     }
958
959     if (filename != NULL) {
960         pstrcpy(bs->filename, sizeof(bs->filename), filename);
961     } else {
962         bs->filename[0] = '\0';
963     }
964
965     bs->drv = drv;
966     bs->opaque = g_malloc0(drv->instance_size);
967
968     bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
969
970     /* Open the image, either directly or using a protocol */
971     if (drv->bdrv_file_open) {
972         assert(file == NULL);
973         assert(!drv->bdrv_needs_filename || filename != NULL);
974         ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
975     } else {
976         if (file == NULL) {
977             error_setg(errp, "Can't use '%s' as a block driver for the "
978                        "protocol level", drv->format_name);
979             ret = -EINVAL;
980             goto free_and_fail;
981         }
982         bs->file = file;
983         ret = drv->bdrv_open(bs, options, open_flags, &local_err);
984     }
985
986     if (ret < 0) {
987         if (local_err) {
988             error_propagate(errp, local_err);
989         } else if (bs->filename[0]) {
990             error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
991         } else {
992             error_setg_errno(errp, -ret, "Could not open image");
993         }
994         goto free_and_fail;
995     }
996
997     ret = refresh_total_sectors(bs, bs->total_sectors);
998     if (ret < 0) {
999         error_setg_errno(errp, -ret, "Could not refresh total sector count");
1000         goto free_and_fail;
1001     }
1002
1003     bdrv_refresh_limits(bs, &local_err);
1004     if (local_err) {
1005         error_propagate(errp, local_err);
1006         ret = -EINVAL;
1007         goto free_and_fail;
1008     }
1009
1010     assert(bdrv_opt_mem_align(bs) != 0);
1011     assert((bs->request_alignment != 0) || bs->sg);
1012     return 0;
1013
1014 free_and_fail:
1015     bs->file = NULL;
1016     g_free(bs->opaque);
1017     bs->opaque = NULL;
1018     bs->drv = NULL;
1019     return ret;
1020 }
1021
1022 static QDict *parse_json_filename(const char *filename, Error **errp)
1023 {
1024     QObject *options_obj;
1025     QDict *options;
1026     int ret;
1027
1028     ret = strstart(filename, "json:", &filename);
1029     assert(ret);
1030
1031     options_obj = qobject_from_json(filename);
1032     if (!options_obj) {
1033         error_setg(errp, "Could not parse the JSON options");
1034         return NULL;
1035     }
1036
1037     if (qobject_type(options_obj) != QTYPE_QDICT) {
1038         qobject_decref(options_obj);
1039         error_setg(errp, "Invalid JSON object given");
1040         return NULL;
1041     }
1042
1043     options = qobject_to_qdict(options_obj);
1044     qdict_flatten(options);
1045
1046     return options;
1047 }
1048
1049 /*
1050  * Fills in default options for opening images and converts the legacy
1051  * filename/flags pair to option QDict entries.
1052  */
1053 static int bdrv_fill_options(QDict **options, const char **pfilename, int flags,
1054                              BlockDriver *drv, Error **errp)
1055 {
1056     const char *filename = *pfilename;
1057     const char *drvname;
1058     bool protocol = flags & BDRV_O_PROTOCOL;
1059     bool parse_filename = false;
1060     Error *local_err = NULL;
1061
1062     /* Parse json: pseudo-protocol */
1063     if (filename && g_str_has_prefix(filename, "json:")) {
1064         QDict *json_options = parse_json_filename(filename, &local_err);
1065         if (local_err) {
1066             error_propagate(errp, local_err);
1067             return -EINVAL;
1068         }
1069
1070         /* Options given in the filename have lower priority than options
1071          * specified directly */
1072         qdict_join(*options, json_options, false);
1073         QDECREF(json_options);
1074         *pfilename = filename = NULL;
1075     }
1076
1077     /* Fetch the file name from the options QDict if necessary */
1078     if (protocol && filename) {
1079         if (!qdict_haskey(*options, "filename")) {
1080             qdict_put(*options, "filename", qstring_from_str(filename));
1081             parse_filename = true;
1082         } else {
1083             error_setg(errp, "Can't specify 'file' and 'filename' options at "
1084                              "the same time");
1085             return -EINVAL;
1086         }
1087     }
1088
1089     /* Find the right block driver */
1090     filename = qdict_get_try_str(*options, "filename");
1091     drvname = qdict_get_try_str(*options, "driver");
1092
1093     if (drv) {
1094         if (drvname) {
1095             error_setg(errp, "Driver specified twice");
1096             return -EINVAL;
1097         }
1098         drvname = drv->format_name;
1099         qdict_put(*options, "driver", qstring_from_str(drvname));
1100     } else {
1101         if (!drvname && protocol) {
1102             if (filename) {
1103                 drv = bdrv_find_protocol(filename, parse_filename);
1104                 if (!drv) {
1105                     error_setg(errp, "Unknown protocol");
1106                     return -EINVAL;
1107                 }
1108
1109                 drvname = drv->format_name;
1110                 qdict_put(*options, "driver", qstring_from_str(drvname));
1111             } else {
1112                 error_setg(errp, "Must specify either driver or file");
1113                 return -EINVAL;
1114             }
1115         } else if (drvname) {
1116             drv = bdrv_find_format(drvname);
1117             if (!drv) {
1118                 error_setg(errp, "Unknown driver '%s'", drvname);
1119                 return -ENOENT;
1120             }
1121         }
1122     }
1123
1124     assert(drv || !protocol);
1125
1126     /* Driver-specific filename parsing */
1127     if (drv && drv->bdrv_parse_filename && parse_filename) {
1128         drv->bdrv_parse_filename(filename, *options, &local_err);
1129         if (local_err) {
1130             error_propagate(errp, local_err);
1131             return -EINVAL;
1132         }
1133
1134         if (!drv->bdrv_needs_filename) {
1135             qdict_del(*options, "filename");
1136         }
1137     }
1138
1139     return 0;
1140 }
1141
1142 void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
1143 {
1144
1145     if (bs->backing_hd) {
1146         assert(bs->backing_blocker);
1147         bdrv_op_unblock_all(bs->backing_hd, bs->backing_blocker);
1148     } else if (backing_hd) {
1149         error_setg(&bs->backing_blocker,
1150                    "device is used as backing hd of '%s'",
1151                    bs->device_name);
1152     }
1153
1154     bs->backing_hd = backing_hd;
1155     if (!backing_hd) {
1156         error_free(bs->backing_blocker);
1157         bs->backing_blocker = NULL;
1158         goto out;
1159     }
1160     bs->open_flags &= ~BDRV_O_NO_BACKING;
1161     pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
1162     pstrcpy(bs->backing_format, sizeof(bs->backing_format),
1163             backing_hd->drv ? backing_hd->drv->format_name : "");
1164
1165     bdrv_op_block_all(bs->backing_hd, bs->backing_blocker);
1166     /* Otherwise we won't be able to commit due to check in bdrv_commit */
1167     bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT,
1168                     bs->backing_blocker);
1169 out:
1170     bdrv_refresh_limits(bs, NULL);
1171 }
1172
1173 /*
1174  * Opens the backing file for a BlockDriverState if not yet open
1175  *
1176  * options is a QDict of options to pass to the block drivers, or NULL for an
1177  * empty set of options. The reference to the QDict is transferred to this
1178  * function (even on failure), so if the caller intends to reuse the dictionary,
1179  * it needs to use QINCREF() before calling bdrv_file_open.
1180  */
1181 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1182 {
1183     char *backing_filename = g_malloc0(PATH_MAX);
1184     int ret = 0;
1185     BlockDriver *back_drv = NULL;
1186     BlockDriverState *backing_hd;
1187     Error *local_err = NULL;
1188
1189     if (bs->backing_hd != NULL) {
1190         QDECREF(options);
1191         goto free_exit;
1192     }
1193
1194     /* NULL means an empty set of options */
1195     if (options == NULL) {
1196         options = qdict_new();
1197     }
1198
1199     bs->open_flags &= ~BDRV_O_NO_BACKING;
1200     if (qdict_haskey(options, "file.filename")) {
1201         backing_filename[0] = '\0';
1202     } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1203         QDECREF(options);
1204         goto free_exit;
1205     } else {
1206         bdrv_get_full_backing_filename(bs, backing_filename, PATH_MAX);
1207     }
1208
1209     if (!bs->drv || !bs->drv->supports_backing) {
1210         ret = -EINVAL;
1211         error_setg(errp, "Driver doesn't support backing files");
1212         QDECREF(options);
1213         goto free_exit;
1214     }
1215
1216     backing_hd = bdrv_new("", errp);
1217
1218     if (bs->backing_format[0] != '\0') {
1219         back_drv = bdrv_find_format(bs->backing_format);
1220     }
1221
1222     assert(bs->backing_hd == NULL);
1223     ret = bdrv_open(&backing_hd,
1224                     *backing_filename ? backing_filename : NULL, NULL, options,
1225                     bdrv_backing_flags(bs->open_flags), back_drv, &local_err);
1226     if (ret < 0) {
1227         bdrv_unref(backing_hd);
1228         backing_hd = NULL;
1229         bs->open_flags |= BDRV_O_NO_BACKING;
1230         error_setg(errp, "Could not open backing file: %s",
1231                    error_get_pretty(local_err));
1232         error_free(local_err);
1233         goto free_exit;
1234     }
1235     bdrv_set_backing_hd(bs, backing_hd);
1236
1237 free_exit:
1238     g_free(backing_filename);
1239     return ret;
1240 }
1241
1242 /*
1243  * Opens a disk image whose options are given as BlockdevRef in another block
1244  * device's options.
1245  *
1246  * If allow_none is true, no image will be opened if filename is false and no
1247  * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1248  *
1249  * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1250  * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1251  * itself, all options starting with "${bdref_key}." are considered part of the
1252  * BlockdevRef.
1253  *
1254  * The BlockdevRef will be removed from the options QDict.
1255  *
1256  * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1257  */
1258 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1259                     QDict *options, const char *bdref_key, int flags,
1260                     bool allow_none, Error **errp)
1261 {
1262     QDict *image_options;
1263     int ret;
1264     char *bdref_key_dot;
1265     const char *reference;
1266
1267     assert(pbs);
1268     assert(*pbs == NULL);
1269
1270     bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1271     qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1272     g_free(bdref_key_dot);
1273
1274     reference = qdict_get_try_str(options, bdref_key);
1275     if (!filename && !reference && !qdict_size(image_options)) {
1276         if (allow_none) {
1277             ret = 0;
1278         } else {
1279             error_setg(errp, "A block device must be specified for \"%s\"",
1280                        bdref_key);
1281             ret = -EINVAL;
1282         }
1283         QDECREF(image_options);
1284         goto done;
1285     }
1286
1287     ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1288
1289 done:
1290     qdict_del(options, bdref_key);
1291     return ret;
1292 }
1293
1294 int bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp)
1295 {
1296     /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1297     char *tmp_filename = g_malloc0(PATH_MAX + 1);
1298     int64_t total_size;
1299     BlockDriver *bdrv_qcow2;
1300     QemuOpts *opts = NULL;
1301     QDict *snapshot_options;
1302     BlockDriverState *bs_snapshot;
1303     Error *local_err;
1304     int ret;
1305
1306     /* if snapshot, we create a temporary backing file and open it
1307        instead of opening 'filename' directly */
1308
1309     /* Get the required size from the image */
1310     total_size = bdrv_getlength(bs);
1311     if (total_size < 0) {
1312         ret = total_size;
1313         error_setg_errno(errp, -total_size, "Could not get image size");
1314         goto out;
1315     }
1316     total_size &= BDRV_SECTOR_MASK;
1317
1318     /* Create the temporary image */
1319     ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
1320     if (ret < 0) {
1321         error_setg_errno(errp, -ret, "Could not get temporary filename");
1322         goto out;
1323     }
1324
1325     bdrv_qcow2 = bdrv_find_format("qcow2");
1326     opts = qemu_opts_create(bdrv_qcow2->create_opts, NULL, 0,
1327                             &error_abort);
1328     qemu_opt_set_number(opts, BLOCK_OPT_SIZE, total_size);
1329     ret = bdrv_create(bdrv_qcow2, tmp_filename, opts, &local_err);
1330     qemu_opts_del(opts);
1331     if (ret < 0) {
1332         error_setg_errno(errp, -ret, "Could not create temporary overlay "
1333                          "'%s': %s", tmp_filename,
1334                          error_get_pretty(local_err));
1335         error_free(local_err);
1336         goto out;
1337     }
1338
1339     /* Prepare a new options QDict for the temporary file */
1340     snapshot_options = qdict_new();
1341     qdict_put(snapshot_options, "file.driver",
1342               qstring_from_str("file"));
1343     qdict_put(snapshot_options, "file.filename",
1344               qstring_from_str(tmp_filename));
1345
1346     bs_snapshot = bdrv_new("", &error_abort);
1347
1348     ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
1349                     flags, bdrv_qcow2, &local_err);
1350     if (ret < 0) {
1351         error_propagate(errp, local_err);
1352         goto out;
1353     }
1354
1355     bdrv_append(bs_snapshot, bs);
1356
1357 out:
1358     g_free(tmp_filename);
1359     return ret;
1360 }
1361
1362 /*
1363  * Opens a disk image (raw, qcow2, vmdk, ...)
1364  *
1365  * options is a QDict of options to pass to the block drivers, or NULL for an
1366  * empty set of options. The reference to the QDict belongs to the block layer
1367  * after the call (even on failure), so if the caller intends to reuse the
1368  * dictionary, it needs to use QINCREF() before calling bdrv_open.
1369  *
1370  * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1371  * If it is not NULL, the referenced BDS will be reused.
1372  *
1373  * The reference parameter may be used to specify an existing block device which
1374  * should be opened. If specified, neither options nor a filename may be given,
1375  * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1376  */
1377 int bdrv_open(BlockDriverState **pbs, const char *filename,
1378               const char *reference, QDict *options, int flags,
1379               BlockDriver *drv, Error **errp)
1380 {
1381     int ret;
1382     BlockDriverState *file = NULL, *bs;
1383     const char *drvname;
1384     Error *local_err = NULL;
1385     int snapshot_flags = 0;
1386
1387     assert(pbs);
1388
1389     if (reference) {
1390         bool options_non_empty = options ? qdict_size(options) : false;
1391         QDECREF(options);
1392
1393         if (*pbs) {
1394             error_setg(errp, "Cannot reuse an existing BDS when referencing "
1395                        "another block device");
1396             return -EINVAL;
1397         }
1398
1399         if (filename || options_non_empty) {
1400             error_setg(errp, "Cannot reference an existing block device with "
1401                        "additional options or a new filename");
1402             return -EINVAL;
1403         }
1404
1405         bs = bdrv_lookup_bs(reference, reference, errp);
1406         if (!bs) {
1407             return -ENODEV;
1408         }
1409         bdrv_ref(bs);
1410         *pbs = bs;
1411         return 0;
1412     }
1413
1414     if (*pbs) {
1415         bs = *pbs;
1416     } else {
1417         bs = bdrv_new("", &error_abort);
1418     }
1419
1420     /* NULL means an empty set of options */
1421     if (options == NULL) {
1422         options = qdict_new();
1423     }
1424
1425     ret = bdrv_fill_options(&options, &filename, flags, drv, &local_err);
1426     if (local_err) {
1427         goto fail;
1428     }
1429
1430     /* Find the right image format driver */
1431     drv = NULL;
1432     drvname = qdict_get_try_str(options, "driver");
1433     if (drvname) {
1434         drv = bdrv_find_format(drvname);
1435         qdict_del(options, "driver");
1436         if (!drv) {
1437             error_setg(errp, "Unknown driver: '%s'", drvname);
1438             ret = -EINVAL;
1439             goto fail;
1440         }
1441     }
1442
1443     assert(drvname || !(flags & BDRV_O_PROTOCOL));
1444     if (drv && !drv->bdrv_file_open) {
1445         /* If the user explicitly wants a format driver here, we'll need to add
1446          * another layer for the protocol in bs->file */
1447         flags &= ~BDRV_O_PROTOCOL;
1448     }
1449
1450     bs->options = options;
1451     options = qdict_clone_shallow(options);
1452
1453     /* Open image file without format layer */
1454     if ((flags & BDRV_O_PROTOCOL) == 0) {
1455         if (flags & BDRV_O_RDWR) {
1456             flags |= BDRV_O_ALLOW_RDWR;
1457         }
1458         if (flags & BDRV_O_SNAPSHOT) {
1459             snapshot_flags = bdrv_temp_snapshot_flags(flags);
1460             flags = bdrv_backing_flags(flags);
1461         }
1462
1463         assert(file == NULL);
1464         ret = bdrv_open_image(&file, filename, options, "file",
1465                               bdrv_inherited_flags(flags),
1466                               true, &local_err);
1467         if (ret < 0) {
1468             goto fail;
1469         }
1470     }
1471
1472     /* Image format probing */
1473     if (!drv && file) {
1474         ret = find_image_format(file, filename, &drv, &local_err);
1475         if (ret < 0) {
1476             goto fail;
1477         }
1478     } else if (!drv) {
1479         error_setg(errp, "Must specify either driver or file");
1480         ret = -EINVAL;
1481         goto fail;
1482     }
1483
1484     /* Open the image */
1485     ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1486     if (ret < 0) {
1487         goto fail;
1488     }
1489
1490     if (file && (bs->file != file)) {
1491         bdrv_unref(file);
1492         file = NULL;
1493     }
1494
1495     /* If there is a backing file, use it */
1496     if ((flags & BDRV_O_NO_BACKING) == 0) {
1497         QDict *backing_options;
1498
1499         qdict_extract_subqdict(options, &backing_options, "backing.");
1500         ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1501         if (ret < 0) {
1502             goto close_and_fail;
1503         }
1504     }
1505
1506     /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1507      * temporary snapshot afterwards. */
1508     if (snapshot_flags) {
1509         ret = bdrv_append_temp_snapshot(bs, snapshot_flags, &local_err);
1510         if (local_err) {
1511             goto close_and_fail;
1512         }
1513     }
1514
1515     /* Check if any unknown options were used */
1516     if (options && (qdict_size(options) != 0)) {
1517         const QDictEntry *entry = qdict_first(options);
1518         if (flags & BDRV_O_PROTOCOL) {
1519             error_setg(errp, "Block protocol '%s' doesn't support the option "
1520                        "'%s'", drv->format_name, entry->key);
1521         } else {
1522             error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1523                        "support the option '%s'", drv->format_name,
1524                        bs->device_name, entry->key);
1525         }
1526
1527         ret = -EINVAL;
1528         goto close_and_fail;
1529     }
1530
1531     if (!bdrv_key_required(bs)) {
1532         bdrv_dev_change_media_cb(bs, true);
1533     } else if (!runstate_check(RUN_STATE_PRELAUNCH)
1534                && !runstate_check(RUN_STATE_INMIGRATE)
1535                && !runstate_check(RUN_STATE_PAUSED)) { /* HACK */
1536         error_setg(errp,
1537                    "Guest must be stopped for opening of encrypted image");
1538         ret = -EBUSY;
1539         goto close_and_fail;
1540     }
1541
1542     QDECREF(options);
1543     *pbs = bs;
1544     return 0;
1545
1546 fail:
1547     if (file != NULL) {
1548         bdrv_unref(file);
1549     }
1550     QDECREF(bs->options);
1551     QDECREF(options);
1552     bs->options = NULL;
1553     if (!*pbs) {
1554         /* If *pbs is NULL, a new BDS has been created in this function and
1555            needs to be freed now. Otherwise, it does not need to be closed,
1556            since it has not really been opened yet. */
1557         bdrv_unref(bs);
1558     }
1559     if (local_err) {
1560         error_propagate(errp, local_err);
1561     }
1562     return ret;
1563
1564 close_and_fail:
1565     /* See fail path, but now the BDS has to be always closed */
1566     if (*pbs) {
1567         bdrv_close(bs);
1568     } else {
1569         bdrv_unref(bs);
1570     }
1571     QDECREF(options);
1572     if (local_err) {
1573         error_propagate(errp, local_err);
1574     }
1575     return ret;
1576 }
1577
1578 typedef struct BlockReopenQueueEntry {
1579      bool prepared;
1580      BDRVReopenState state;
1581      QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1582 } BlockReopenQueueEntry;
1583
1584 /*
1585  * Adds a BlockDriverState to a simple queue for an atomic, transactional
1586  * reopen of multiple devices.
1587  *
1588  * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1589  * already performed, or alternatively may be NULL a new BlockReopenQueue will
1590  * be created and initialized. This newly created BlockReopenQueue should be
1591  * passed back in for subsequent calls that are intended to be of the same
1592  * atomic 'set'.
1593  *
1594  * bs is the BlockDriverState to add to the reopen queue.
1595  *
1596  * flags contains the open flags for the associated bs
1597  *
1598  * returns a pointer to bs_queue, which is either the newly allocated
1599  * bs_queue, or the existing bs_queue being used.
1600  *
1601  */
1602 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1603                                     BlockDriverState *bs, int flags)
1604 {
1605     assert(bs != NULL);
1606
1607     BlockReopenQueueEntry *bs_entry;
1608     if (bs_queue == NULL) {
1609         bs_queue = g_new0(BlockReopenQueue, 1);
1610         QSIMPLEQ_INIT(bs_queue);
1611     }
1612
1613     /* bdrv_open() masks this flag out */
1614     flags &= ~BDRV_O_PROTOCOL;
1615
1616     if (bs->file) {
1617         bdrv_reopen_queue(bs_queue, bs->file, bdrv_inherited_flags(flags));
1618     }
1619
1620     bs_entry = g_new0(BlockReopenQueueEntry, 1);
1621     QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1622
1623     bs_entry->state.bs = bs;
1624     bs_entry->state.flags = flags;
1625
1626     return bs_queue;
1627 }
1628
1629 /*
1630  * Reopen multiple BlockDriverStates atomically & transactionally.
1631  *
1632  * The queue passed in (bs_queue) must have been built up previous
1633  * via bdrv_reopen_queue().
1634  *
1635  * Reopens all BDS specified in the queue, with the appropriate
1636  * flags.  All devices are prepared for reopen, and failure of any
1637  * device will cause all device changes to be abandonded, and intermediate
1638  * data cleaned up.
1639  *
1640  * If all devices prepare successfully, then the changes are committed
1641  * to all devices.
1642  *
1643  */
1644 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1645 {
1646     int ret = -1;
1647     BlockReopenQueueEntry *bs_entry, *next;
1648     Error *local_err = NULL;
1649
1650     assert(bs_queue != NULL);
1651
1652     bdrv_drain_all();
1653
1654     QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1655         if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1656             error_propagate(errp, local_err);
1657             goto cleanup;
1658         }
1659         bs_entry->prepared = true;
1660     }
1661
1662     /* If we reach this point, we have success and just need to apply the
1663      * changes
1664      */
1665     QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1666         bdrv_reopen_commit(&bs_entry->state);
1667     }
1668
1669     ret = 0;
1670
1671 cleanup:
1672     QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1673         if (ret && bs_entry->prepared) {
1674             bdrv_reopen_abort(&bs_entry->state);
1675         }
1676         g_free(bs_entry);
1677     }
1678     g_free(bs_queue);
1679     return ret;
1680 }
1681
1682
1683 /* Reopen a single BlockDriverState with the specified flags. */
1684 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1685 {
1686     int ret = -1;
1687     Error *local_err = NULL;
1688     BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1689
1690     ret = bdrv_reopen_multiple(queue, &local_err);
1691     if (local_err != NULL) {
1692         error_propagate(errp, local_err);
1693     }
1694     return ret;
1695 }
1696
1697
1698 /*
1699  * Prepares a BlockDriverState for reopen. All changes are staged in the
1700  * 'opaque' field of the BDRVReopenState, which is used and allocated by
1701  * the block driver layer .bdrv_reopen_prepare()
1702  *
1703  * bs is the BlockDriverState to reopen
1704  * flags are the new open flags
1705  * queue is the reopen queue
1706  *
1707  * Returns 0 on success, non-zero on error.  On error errp will be set
1708  * as well.
1709  *
1710  * On failure, bdrv_reopen_abort() will be called to clean up any data.
1711  * It is the responsibility of the caller to then call the abort() or
1712  * commit() for any other BDS that have been left in a prepare() state
1713  *
1714  */
1715 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1716                         Error **errp)
1717 {
1718     int ret = -1;
1719     Error *local_err = NULL;
1720     BlockDriver *drv;
1721
1722     assert(reopen_state != NULL);
1723     assert(reopen_state->bs->drv != NULL);
1724     drv = reopen_state->bs->drv;
1725
1726     /* if we are to stay read-only, do not allow permission change
1727      * to r/w */
1728     if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1729         reopen_state->flags & BDRV_O_RDWR) {
1730         error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1731                   reopen_state->bs->device_name);
1732         goto error;
1733     }
1734
1735
1736     ret = bdrv_flush(reopen_state->bs);
1737     if (ret) {
1738         error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1739                   strerror(-ret));
1740         goto error;
1741     }
1742
1743     if (drv->bdrv_reopen_prepare) {
1744         ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1745         if (ret) {
1746             if (local_err != NULL) {
1747                 error_propagate(errp, local_err);
1748             } else {
1749                 error_setg(errp, "failed while preparing to reopen image '%s'",
1750                            reopen_state->bs->filename);
1751             }
1752             goto error;
1753         }
1754     } else {
1755         /* It is currently mandatory to have a bdrv_reopen_prepare()
1756          * handler for each supported drv. */
1757         error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1758                   drv->format_name, reopen_state->bs->device_name,
1759                  "reopening of file");
1760         ret = -1;
1761         goto error;
1762     }
1763
1764     ret = 0;
1765
1766 error:
1767     return ret;
1768 }
1769
1770 /*
1771  * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1772  * makes them final by swapping the staging BlockDriverState contents into
1773  * the active BlockDriverState contents.
1774  */
1775 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1776 {
1777     BlockDriver *drv;
1778
1779     assert(reopen_state != NULL);
1780     drv = reopen_state->bs->drv;
1781     assert(drv != NULL);
1782
1783     /* If there are any driver level actions to take */
1784     if (drv->bdrv_reopen_commit) {
1785         drv->bdrv_reopen_commit(reopen_state);
1786     }
1787
1788     /* set BDS specific flags now */
1789     reopen_state->bs->open_flags         = reopen_state->flags;
1790     reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1791                                               BDRV_O_CACHE_WB);
1792     reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1793
1794     bdrv_refresh_limits(reopen_state->bs, NULL);
1795 }
1796
1797 /*
1798  * Abort the reopen, and delete and free the staged changes in
1799  * reopen_state
1800  */
1801 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1802 {
1803     BlockDriver *drv;
1804
1805     assert(reopen_state != NULL);
1806     drv = reopen_state->bs->drv;
1807     assert(drv != NULL);
1808
1809     if (drv->bdrv_reopen_abort) {
1810         drv->bdrv_reopen_abort(reopen_state);
1811     }
1812 }
1813
1814
1815 void bdrv_close(BlockDriverState *bs)
1816 {
1817     if (bs->job) {
1818         block_job_cancel_sync(bs->job);
1819     }
1820     bdrv_drain_all(); /* complete I/O */
1821     bdrv_flush(bs);
1822     bdrv_drain_all(); /* in case flush left pending I/O */
1823     notifier_list_notify(&bs->close_notifiers, bs);
1824
1825     if (bs->drv) {
1826         if (bs->backing_hd) {
1827             BlockDriverState *backing_hd = bs->backing_hd;
1828             bdrv_set_backing_hd(bs, NULL);
1829             bdrv_unref(backing_hd);
1830         }
1831         bs->drv->bdrv_close(bs);
1832         g_free(bs->opaque);
1833         bs->opaque = NULL;
1834         bs->drv = NULL;
1835         bs->copy_on_read = 0;
1836         bs->backing_file[0] = '\0';
1837         bs->backing_format[0] = '\0';
1838         bs->total_sectors = 0;
1839         bs->encrypted = 0;
1840         bs->valid_key = 0;
1841         bs->sg = 0;
1842         bs->growable = 0;
1843         bs->zero_beyond_eof = false;
1844         QDECREF(bs->options);
1845         bs->options = NULL;
1846
1847         if (bs->file != NULL) {
1848             bdrv_unref(bs->file);
1849             bs->file = NULL;
1850         }
1851     }
1852
1853     bdrv_dev_change_media_cb(bs, false);
1854
1855     /*throttling disk I/O limits*/
1856     if (bs->io_limits_enabled) {
1857         bdrv_io_limits_disable(bs);
1858     }
1859 }
1860
1861 void bdrv_close_all(void)
1862 {
1863     BlockDriverState *bs;
1864
1865     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1866         AioContext *aio_context = bdrv_get_aio_context(bs);
1867
1868         aio_context_acquire(aio_context);
1869         bdrv_close(bs);
1870         aio_context_release(aio_context);
1871     }
1872 }
1873
1874 /* Check if any requests are in-flight (including throttled requests) */
1875 static bool bdrv_requests_pending(BlockDriverState *bs)
1876 {
1877     if (!QLIST_EMPTY(&bs->tracked_requests)) {
1878         return true;
1879     }
1880     if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1881         return true;
1882     }
1883     if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1884         return true;
1885     }
1886     if (bs->file && bdrv_requests_pending(bs->file)) {
1887         return true;
1888     }
1889     if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1890         return true;
1891     }
1892     return false;
1893 }
1894
1895 /*
1896  * Wait for pending requests to complete across all BlockDriverStates
1897  *
1898  * This function does not flush data to disk, use bdrv_flush_all() for that
1899  * after calling this function.
1900  *
1901  * Note that completion of an asynchronous I/O operation can trigger any
1902  * number of other I/O operations on other devices---for example a coroutine
1903  * can be arbitrarily complex and a constant flow of I/O can come until the
1904  * coroutine is complete.  Because of this, it is not possible to have a
1905  * function to drain a single device's I/O queue.
1906  */
1907 void bdrv_drain_all(void)
1908 {
1909     /* Always run first iteration so any pending completion BHs run */
1910     bool busy = true;
1911     BlockDriverState *bs;
1912
1913     while (busy) {
1914         busy = false;
1915
1916         QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1917             AioContext *aio_context = bdrv_get_aio_context(bs);
1918             bool bs_busy;
1919
1920             aio_context_acquire(aio_context);
1921             bdrv_flush_io_queue(bs);
1922             bdrv_start_throttled_reqs(bs);
1923             bs_busy = bdrv_requests_pending(bs);
1924             bs_busy |= aio_poll(aio_context, bs_busy);
1925             aio_context_release(aio_context);
1926
1927             busy |= bs_busy;
1928         }
1929     }
1930 }
1931
1932 /* make a BlockDriverState anonymous by removing from bdrv_state and
1933  * graph_bdrv_state list.
1934    Also, NULL terminate the device_name to prevent double remove */
1935 void bdrv_make_anon(BlockDriverState *bs)
1936 {
1937     if (bs->device_name[0] != '\0') {
1938         QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1939     }
1940     bs->device_name[0] = '\0';
1941     if (bs->node_name[0] != '\0') {
1942         QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1943     }
1944     bs->node_name[0] = '\0';
1945 }
1946
1947 static void bdrv_rebind(BlockDriverState *bs)
1948 {
1949     if (bs->drv && bs->drv->bdrv_rebind) {
1950         bs->drv->bdrv_rebind(bs);
1951     }
1952 }
1953
1954 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1955                                      BlockDriverState *bs_src)
1956 {
1957     /* move some fields that need to stay attached to the device */
1958
1959     /* dev info */
1960     bs_dest->dev_ops            = bs_src->dev_ops;
1961     bs_dest->dev_opaque         = bs_src->dev_opaque;
1962     bs_dest->dev                = bs_src->dev;
1963     bs_dest->guest_block_size   = bs_src->guest_block_size;
1964     bs_dest->copy_on_read       = bs_src->copy_on_read;
1965
1966     bs_dest->enable_write_cache = bs_src->enable_write_cache;
1967
1968     /* i/o throttled req */
1969     memcpy(&bs_dest->throttle_state,
1970            &bs_src->throttle_state,
1971            sizeof(ThrottleState));
1972     bs_dest->throttled_reqs[0]  = bs_src->throttled_reqs[0];
1973     bs_dest->throttled_reqs[1]  = bs_src->throttled_reqs[1];
1974     bs_dest->io_limits_enabled  = bs_src->io_limits_enabled;
1975
1976     /* r/w error */
1977     bs_dest->on_read_error      = bs_src->on_read_error;
1978     bs_dest->on_write_error     = bs_src->on_write_error;
1979
1980     /* i/o status */
1981     bs_dest->iostatus_enabled   = bs_src->iostatus_enabled;
1982     bs_dest->iostatus           = bs_src->iostatus;
1983
1984     /* dirty bitmap */
1985     bs_dest->dirty_bitmaps      = bs_src->dirty_bitmaps;
1986
1987     /* reference count */
1988     bs_dest->refcnt             = bs_src->refcnt;
1989
1990     /* job */
1991     bs_dest->job                = bs_src->job;
1992
1993     /* keep the same entry in bdrv_states */
1994     pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1995             bs_src->device_name);
1996     bs_dest->device_list = bs_src->device_list;
1997     memcpy(bs_dest->op_blockers, bs_src->op_blockers,
1998            sizeof(bs_dest->op_blockers));
1999 }
2000
2001 /*
2002  * Swap bs contents for two image chains while they are live,
2003  * while keeping required fields on the BlockDriverState that is
2004  * actually attached to a device.
2005  *
2006  * This will modify the BlockDriverState fields, and swap contents
2007  * between bs_new and bs_old. Both bs_new and bs_old are modified.
2008  *
2009  * bs_new is required to be anonymous.
2010  *
2011  * This function does not create any image files.
2012  */
2013 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
2014 {
2015     BlockDriverState tmp;
2016
2017     /* The code needs to swap the node_name but simply swapping node_list won't
2018      * work so first remove the nodes from the graph list, do the swap then
2019      * insert them back if needed.
2020      */
2021     if (bs_new->node_name[0] != '\0') {
2022         QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list);
2023     }
2024     if (bs_old->node_name[0] != '\0') {
2025         QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list);
2026     }
2027
2028     /* bs_new must be anonymous and shouldn't have anything fancy enabled */
2029     assert(bs_new->device_name[0] == '\0');
2030     assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
2031     assert(bs_new->job == NULL);
2032     assert(bs_new->dev == NULL);
2033     assert(bs_new->io_limits_enabled == false);
2034     assert(!throttle_have_timer(&bs_new->throttle_state));
2035
2036     tmp = *bs_new;
2037     *bs_new = *bs_old;
2038     *bs_old = tmp;
2039
2040     /* there are some fields that should not be swapped, move them back */
2041     bdrv_move_feature_fields(&tmp, bs_old);
2042     bdrv_move_feature_fields(bs_old, bs_new);
2043     bdrv_move_feature_fields(bs_new, &tmp);
2044
2045     /* bs_new shouldn't be in bdrv_states even after the swap!  */
2046     assert(bs_new->device_name[0] == '\0');
2047
2048     /* Check a few fields that should remain attached to the device */
2049     assert(bs_new->dev == NULL);
2050     assert(bs_new->job == NULL);
2051     assert(bs_new->io_limits_enabled == false);
2052     assert(!throttle_have_timer(&bs_new->throttle_state));
2053
2054     /* insert the nodes back into the graph node list if needed */
2055     if (bs_new->node_name[0] != '\0') {
2056         QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list);
2057     }
2058     if (bs_old->node_name[0] != '\0') {
2059         QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list);
2060     }
2061
2062     bdrv_rebind(bs_new);
2063     bdrv_rebind(bs_old);
2064 }
2065
2066 /*
2067  * Add new bs contents at the top of an image chain while the chain is
2068  * live, while keeping required fields on the top layer.
2069  *
2070  * This will modify the BlockDriverState fields, and swap contents
2071  * between bs_new and bs_top. Both bs_new and bs_top are modified.
2072  *
2073  * bs_new is required to be anonymous.
2074  *
2075  * This function does not create any image files.
2076  */
2077 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
2078 {
2079     bdrv_swap(bs_new, bs_top);
2080
2081     /* The contents of 'tmp' will become bs_top, as we are
2082      * swapping bs_new and bs_top contents. */
2083     bdrv_set_backing_hd(bs_top, bs_new);
2084 }
2085
2086 static void bdrv_delete(BlockDriverState *bs)
2087 {
2088     assert(!bs->dev);
2089     assert(!bs->job);
2090     assert(bdrv_op_blocker_is_empty(bs));
2091     assert(!bs->refcnt);
2092     assert(QLIST_EMPTY(&bs->dirty_bitmaps));
2093
2094     bdrv_close(bs);
2095
2096     /* remove from list, if necessary */
2097     bdrv_make_anon(bs);
2098
2099     g_free(bs);
2100 }
2101
2102 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
2103 /* TODO change to DeviceState *dev when all users are qdevified */
2104 {
2105     if (bs->dev) {
2106         return -EBUSY;
2107     }
2108     bs->dev = dev;
2109     bdrv_iostatus_reset(bs);
2110     return 0;
2111 }
2112
2113 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2114 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
2115 {
2116     if (bdrv_attach_dev(bs, dev) < 0) {
2117         abort();
2118     }
2119 }
2120
2121 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
2122 /* TODO change to DeviceState *dev when all users are qdevified */
2123 {
2124     assert(bs->dev == dev);
2125     bs->dev = NULL;
2126     bs->dev_ops = NULL;
2127     bs->dev_opaque = NULL;
2128     bs->guest_block_size = 512;
2129 }
2130
2131 /* TODO change to return DeviceState * when all users are qdevified */
2132 void *bdrv_get_attached_dev(BlockDriverState *bs)
2133 {
2134     return bs->dev;
2135 }
2136
2137 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
2138                       void *opaque)
2139 {
2140     bs->dev_ops = ops;
2141     bs->dev_opaque = opaque;
2142 }
2143
2144 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2145 {
2146     if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2147         bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2148         bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2149         if (tray_was_closed) {
2150             /* tray open */
2151             qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2152                                               true, &error_abort);
2153         }
2154         if (load) {
2155             /* tray close */
2156             qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2157                                               false, &error_abort);
2158         }
2159     }
2160 }
2161
2162 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2163 {
2164     return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2165 }
2166
2167 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2168 {
2169     if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2170         bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2171     }
2172 }
2173
2174 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2175 {
2176     if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2177         return bs->dev_ops->is_tray_open(bs->dev_opaque);
2178     }
2179     return false;
2180 }
2181
2182 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2183 {
2184     if (bs->dev_ops && bs->dev_ops->resize_cb) {
2185         bs->dev_ops->resize_cb(bs->dev_opaque);
2186     }
2187 }
2188
2189 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2190 {
2191     if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2192         return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2193     }
2194     return false;
2195 }
2196
2197 /*
2198  * Run consistency checks on an image
2199  *
2200  * Returns 0 if the check could be completed (it doesn't mean that the image is
2201  * free of errors) or -errno when an internal error occurred. The results of the
2202  * check are stored in res.
2203  */
2204 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2205 {
2206     if (bs->drv->bdrv_check == NULL) {
2207         return -ENOTSUP;
2208     }
2209
2210     memset(res, 0, sizeof(*res));
2211     return bs->drv->bdrv_check(bs, res, fix);
2212 }
2213
2214 #define COMMIT_BUF_SECTORS 2048
2215
2216 /* commit COW file into the raw image */
2217 int bdrv_commit(BlockDriverState *bs)
2218 {
2219     BlockDriver *drv = bs->drv;
2220     int64_t sector, total_sectors, length, backing_length;
2221     int n, ro, open_flags;
2222     int ret = 0;
2223     uint8_t *buf = NULL;
2224     char filename[PATH_MAX];
2225
2226     if (!drv)
2227         return -ENOMEDIUM;
2228     
2229     if (!bs->backing_hd) {
2230         return -ENOTSUP;
2231     }
2232
2233     if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, NULL) ||
2234         bdrv_op_is_blocked(bs->backing_hd, BLOCK_OP_TYPE_COMMIT, NULL)) {
2235         return -EBUSY;
2236     }
2237
2238     ro = bs->backing_hd->read_only;
2239     /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2240     pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2241     open_flags =  bs->backing_hd->open_flags;
2242
2243     if (ro) {
2244         if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2245             return -EACCES;
2246         }
2247     }
2248
2249     length = bdrv_getlength(bs);
2250     if (length < 0) {
2251         ret = length;
2252         goto ro_cleanup;
2253     }
2254
2255     backing_length = bdrv_getlength(bs->backing_hd);
2256     if (backing_length < 0) {
2257         ret = backing_length;
2258         goto ro_cleanup;
2259     }
2260
2261     /* If our top snapshot is larger than the backing file image,
2262      * grow the backing file image if possible.  If not possible,
2263      * we must return an error */
2264     if (length > backing_length) {
2265         ret = bdrv_truncate(bs->backing_hd, length);
2266         if (ret < 0) {
2267             goto ro_cleanup;
2268         }
2269     }
2270
2271     total_sectors = length >> BDRV_SECTOR_BITS;
2272     buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2273
2274     for (sector = 0; sector < total_sectors; sector += n) {
2275         ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2276         if (ret < 0) {
2277             goto ro_cleanup;
2278         }
2279         if (ret) {
2280             ret = bdrv_read(bs, sector, buf, n);
2281             if (ret < 0) {
2282                 goto ro_cleanup;
2283             }
2284
2285             ret = bdrv_write(bs->backing_hd, sector, buf, n);
2286             if (ret < 0) {
2287                 goto ro_cleanup;
2288             }
2289         }
2290     }
2291
2292     if (drv->bdrv_make_empty) {
2293         ret = drv->bdrv_make_empty(bs);
2294         if (ret < 0) {
2295             goto ro_cleanup;
2296         }
2297         bdrv_flush(bs);
2298     }
2299
2300     /*
2301      * Make sure all data we wrote to the backing device is actually
2302      * stable on disk.
2303      */
2304     if (bs->backing_hd) {
2305         bdrv_flush(bs->backing_hd);
2306     }
2307
2308     ret = 0;
2309 ro_cleanup:
2310     g_free(buf);
2311
2312     if (ro) {
2313         /* ignoring error return here */
2314         bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2315     }
2316
2317     return ret;
2318 }
2319
2320 int bdrv_commit_all(void)
2321 {
2322     BlockDriverState *bs;
2323
2324     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2325         AioContext *aio_context = bdrv_get_aio_context(bs);
2326
2327         aio_context_acquire(aio_context);
2328         if (bs->drv && bs->backing_hd) {
2329             int ret = bdrv_commit(bs);
2330             if (ret < 0) {
2331                 aio_context_release(aio_context);
2332                 return ret;
2333             }
2334         }
2335         aio_context_release(aio_context);
2336     }
2337     return 0;
2338 }
2339
2340 /**
2341  * Remove an active request from the tracked requests list
2342  *
2343  * This function should be called when a tracked request is completing.
2344  */
2345 static void tracked_request_end(BdrvTrackedRequest *req)
2346 {
2347     if (req->serialising) {
2348         req->bs->serialising_in_flight--;
2349     }
2350
2351     QLIST_REMOVE(req, list);
2352     qemu_co_queue_restart_all(&req->wait_queue);
2353 }
2354
2355 /**
2356  * Add an active request to the tracked requests list
2357  */
2358 static void tracked_request_begin(BdrvTrackedRequest *req,
2359                                   BlockDriverState *bs,
2360                                   int64_t offset,
2361                                   unsigned int bytes, bool is_write)
2362 {
2363     *req = (BdrvTrackedRequest){
2364         .bs = bs,
2365         .offset         = offset,
2366         .bytes          = bytes,
2367         .is_write       = is_write,
2368         .co             = qemu_coroutine_self(),
2369         .serialising    = false,
2370         .overlap_offset = offset,
2371         .overlap_bytes  = bytes,
2372     };
2373
2374     qemu_co_queue_init(&req->wait_queue);
2375
2376     QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2377 }
2378
2379 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2380 {
2381     int64_t overlap_offset = req->offset & ~(align - 1);
2382     unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2383                                - overlap_offset;
2384
2385     if (!req->serialising) {
2386         req->bs->serialising_in_flight++;
2387         req->serialising = true;
2388     }
2389
2390     req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2391     req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2392 }
2393
2394 /**
2395  * Round a region to cluster boundaries
2396  */
2397 void bdrv_round_to_clusters(BlockDriverState *bs,
2398                             int64_t sector_num, int nb_sectors,
2399                             int64_t *cluster_sector_num,
2400                             int *cluster_nb_sectors)
2401 {
2402     BlockDriverInfo bdi;
2403
2404     if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2405         *cluster_sector_num = sector_num;
2406         *cluster_nb_sectors = nb_sectors;
2407     } else {
2408         int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2409         *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2410         *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2411                                             nb_sectors, c);
2412     }
2413 }
2414
2415 static int bdrv_get_cluster_size(BlockDriverState *bs)
2416 {
2417     BlockDriverInfo bdi;
2418     int ret;
2419
2420     ret = bdrv_get_info(bs, &bdi);
2421     if (ret < 0 || bdi.cluster_size == 0) {
2422         return bs->request_alignment;
2423     } else {
2424         return bdi.cluster_size;
2425     }
2426 }
2427
2428 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2429                                      int64_t offset, unsigned int bytes)
2430 {
2431     /*        aaaa   bbbb */
2432     if (offset >= req->overlap_offset + req->overlap_bytes) {
2433         return false;
2434     }
2435     /* bbbb   aaaa        */
2436     if (req->overlap_offset >= offset + bytes) {
2437         return false;
2438     }
2439     return true;
2440 }
2441
2442 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2443 {
2444     BlockDriverState *bs = self->bs;
2445     BdrvTrackedRequest *req;
2446     bool retry;
2447     bool waited = false;
2448
2449     if (!bs->serialising_in_flight) {
2450         return false;
2451     }
2452
2453     do {
2454         retry = false;
2455         QLIST_FOREACH(req, &bs->tracked_requests, list) {
2456             if (req == self || (!req->serialising && !self->serialising)) {
2457                 continue;
2458             }
2459             if (tracked_request_overlaps(req, self->overlap_offset,
2460                                          self->overlap_bytes))
2461             {
2462                 /* Hitting this means there was a reentrant request, for
2463                  * example, a block driver issuing nested requests.  This must
2464                  * never happen since it means deadlock.
2465                  */
2466                 assert(qemu_coroutine_self() != req->co);
2467
2468                 /* If the request is already (indirectly) waiting for us, or
2469                  * will wait for us as soon as it wakes up, then just go on
2470                  * (instead of producing a deadlock in the former case). */
2471                 if (!req->waiting_for) {
2472                     self->waiting_for = req;
2473                     qemu_co_queue_wait(&req->wait_queue);
2474                     self->waiting_for = NULL;
2475                     retry = true;
2476                     waited = true;
2477                     break;
2478                 }
2479             }
2480         }
2481     } while (retry);
2482
2483     return waited;
2484 }
2485
2486 /*
2487  * Return values:
2488  * 0        - success
2489  * -EINVAL  - backing format specified, but no file
2490  * -ENOSPC  - can't update the backing file because no space is left in the
2491  *            image file header
2492  * -ENOTSUP - format driver doesn't support changing the backing file
2493  */
2494 int bdrv_change_backing_file(BlockDriverState *bs,
2495     const char *backing_file, const char *backing_fmt)
2496 {
2497     BlockDriver *drv = bs->drv;
2498     int ret;
2499
2500     /* Backing file format doesn't make sense without a backing file */
2501     if (backing_fmt && !backing_file) {
2502         return -EINVAL;
2503     }
2504
2505     if (drv->bdrv_change_backing_file != NULL) {
2506         ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2507     } else {
2508         ret = -ENOTSUP;
2509     }
2510
2511     if (ret == 0) {
2512         pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2513         pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2514     }
2515     return ret;
2516 }
2517
2518 /*
2519  * Finds the image layer in the chain that has 'bs' as its backing file.
2520  *
2521  * active is the current topmost image.
2522  *
2523  * Returns NULL if bs is not found in active's image chain,
2524  * or if active == bs.
2525  *
2526  * Returns the bottommost base image if bs == NULL.
2527  */
2528 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2529                                     BlockDriverState *bs)
2530 {
2531     while (active && bs != active->backing_hd) {
2532         active = active->backing_hd;
2533     }
2534
2535     return active;
2536 }
2537
2538 /* Given a BDS, searches for the base layer. */
2539 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
2540 {
2541     return bdrv_find_overlay(bs, NULL);
2542 }
2543
2544 typedef struct BlkIntermediateStates {
2545     BlockDriverState *bs;
2546     QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2547 } BlkIntermediateStates;
2548
2549
2550 /*
2551  * Drops images above 'base' up to and including 'top', and sets the image
2552  * above 'top' to have base as its backing file.
2553  *
2554  * Requires that the overlay to 'top' is opened r/w, so that the backing file
2555  * information in 'bs' can be properly updated.
2556  *
2557  * E.g., this will convert the following chain:
2558  * bottom <- base <- intermediate <- top <- active
2559  *
2560  * to
2561  *
2562  * bottom <- base <- active
2563  *
2564  * It is allowed for bottom==base, in which case it converts:
2565  *
2566  * base <- intermediate <- top <- active
2567  *
2568  * to
2569  *
2570  * base <- active
2571  *
2572  * If backing_file_str is non-NULL, it will be used when modifying top's
2573  * overlay image metadata.
2574  *
2575  * Error conditions:
2576  *  if active == top, that is considered an error
2577  *
2578  */
2579 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2580                            BlockDriverState *base, const char *backing_file_str)
2581 {
2582     BlockDriverState *intermediate;
2583     BlockDriverState *base_bs = NULL;
2584     BlockDriverState *new_top_bs = NULL;
2585     BlkIntermediateStates *intermediate_state, *next;
2586     int ret = -EIO;
2587
2588     QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2589     QSIMPLEQ_INIT(&states_to_delete);
2590
2591     if (!top->drv || !base->drv) {
2592         goto exit;
2593     }
2594
2595     new_top_bs = bdrv_find_overlay(active, top);
2596
2597     if (new_top_bs == NULL) {
2598         /* we could not find the image above 'top', this is an error */
2599         goto exit;
2600     }
2601
2602     /* special case of new_top_bs->backing_hd already pointing to base - nothing
2603      * to do, no intermediate images */
2604     if (new_top_bs->backing_hd == base) {
2605         ret = 0;
2606         goto exit;
2607     }
2608
2609     intermediate = top;
2610
2611     /* now we will go down through the list, and add each BDS we find
2612      * into our deletion queue, until we hit the 'base'
2613      */
2614     while (intermediate) {
2615         intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2616         intermediate_state->bs = intermediate;
2617         QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2618
2619         if (intermediate->backing_hd == base) {
2620             base_bs = intermediate->backing_hd;
2621             break;
2622         }
2623         intermediate = intermediate->backing_hd;
2624     }
2625     if (base_bs == NULL) {
2626         /* something went wrong, we did not end at the base. safely
2627          * unravel everything, and exit with error */
2628         goto exit;
2629     }
2630
2631     /* success - we can delete the intermediate states, and link top->base */
2632     backing_file_str = backing_file_str ? backing_file_str : base_bs->filename;
2633     ret = bdrv_change_backing_file(new_top_bs, backing_file_str,
2634                                    base_bs->drv ? base_bs->drv->format_name : "");
2635     if (ret) {
2636         goto exit;
2637     }
2638     bdrv_set_backing_hd(new_top_bs, base_bs);
2639
2640     QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2641         /* so that bdrv_close() does not recursively close the chain */
2642         bdrv_set_backing_hd(intermediate_state->bs, NULL);
2643         bdrv_unref(intermediate_state->bs);
2644     }
2645     ret = 0;
2646
2647 exit:
2648     QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2649         g_free(intermediate_state);
2650     }
2651     return ret;
2652 }
2653
2654
2655 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2656                                    size_t size)
2657 {
2658     int64_t len;
2659
2660     if (size > INT_MAX) {
2661         return -EIO;
2662     }
2663
2664     if (!bdrv_is_inserted(bs))
2665         return -ENOMEDIUM;
2666
2667     if (bs->growable)
2668         return 0;
2669
2670     len = bdrv_getlength(bs);
2671
2672     if (offset < 0)
2673         return -EIO;
2674
2675     if ((offset > len) || (len - offset < size))
2676         return -EIO;
2677
2678     return 0;
2679 }
2680
2681 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2682                               int nb_sectors)
2683 {
2684     if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2685         return -EIO;
2686     }
2687
2688     return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2689                                    nb_sectors * BDRV_SECTOR_SIZE);
2690 }
2691
2692 typedef struct RwCo {
2693     BlockDriverState *bs;
2694     int64_t offset;
2695     QEMUIOVector *qiov;
2696     bool is_write;
2697     int ret;
2698     BdrvRequestFlags flags;
2699 } RwCo;
2700
2701 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2702 {
2703     RwCo *rwco = opaque;
2704
2705     if (!rwco->is_write) {
2706         rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2707                                       rwco->qiov->size, rwco->qiov,
2708                                       rwco->flags);
2709     } else {
2710         rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2711                                        rwco->qiov->size, rwco->qiov,
2712                                        rwco->flags);
2713     }
2714 }
2715
2716 /*
2717  * Process a vectored synchronous request using coroutines
2718  */
2719 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2720                         QEMUIOVector *qiov, bool is_write,
2721                         BdrvRequestFlags flags)
2722 {
2723     Coroutine *co;
2724     RwCo rwco = {
2725         .bs = bs,
2726         .offset = offset,
2727         .qiov = qiov,
2728         .is_write = is_write,
2729         .ret = NOT_DONE,
2730         .flags = flags,
2731     };
2732
2733     /**
2734      * In sync call context, when the vcpu is blocked, this throttling timer
2735      * will not fire; so the I/O throttling function has to be disabled here
2736      * if it has been enabled.
2737      */
2738     if (bs->io_limits_enabled) {
2739         fprintf(stderr, "Disabling I/O throttling on '%s' due "
2740                         "to synchronous I/O.\n", bdrv_get_device_name(bs));
2741         bdrv_io_limits_disable(bs);
2742     }
2743
2744     if (qemu_in_coroutine()) {
2745         /* Fast-path if already in coroutine context */
2746         bdrv_rw_co_entry(&rwco);
2747     } else {
2748         AioContext *aio_context = bdrv_get_aio_context(bs);
2749
2750         co = qemu_coroutine_create(bdrv_rw_co_entry);
2751         qemu_coroutine_enter(co, &rwco);
2752         while (rwco.ret == NOT_DONE) {
2753             aio_poll(aio_context, true);
2754         }
2755     }
2756     return rwco.ret;
2757 }
2758
2759 /*
2760  * Process a synchronous request using coroutines
2761  */
2762 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2763                       int nb_sectors, bool is_write, BdrvRequestFlags flags)
2764 {
2765     QEMUIOVector qiov;
2766     struct iovec iov = {
2767         .iov_base = (void *)buf,
2768         .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2769     };
2770
2771     if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2772         return -EINVAL;
2773     }
2774
2775     qemu_iovec_init_external(&qiov, &iov, 1);
2776     return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2777                         &qiov, is_write, flags);
2778 }
2779
2780 /* return < 0 if error. See bdrv_write() for the return codes */
2781 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2782               uint8_t *buf, int nb_sectors)
2783 {
2784     return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2785 }
2786
2787 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2788 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2789                           uint8_t *buf, int nb_sectors)
2790 {
2791     bool enabled;
2792     int ret;
2793
2794     enabled = bs->io_limits_enabled;
2795     bs->io_limits_enabled = false;
2796     ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2797     bs->io_limits_enabled = enabled;
2798     return ret;
2799 }
2800
2801 /* Return < 0 if error. Important errors are:
2802   -EIO         generic I/O error (may happen for all errors)
2803   -ENOMEDIUM   No media inserted.
2804   -EINVAL      Invalid sector number or nb_sectors
2805   -EACCES      Trying to write a read-only device
2806 */
2807 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2808                const uint8_t *buf, int nb_sectors)
2809 {
2810     return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2811 }
2812
2813 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2814                       int nb_sectors, BdrvRequestFlags flags)
2815 {
2816     return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2817                       BDRV_REQ_ZERO_WRITE | flags);
2818 }
2819
2820 /*
2821  * Completely zero out a block device with the help of bdrv_write_zeroes.
2822  * The operation is sped up by checking the block status and only writing
2823  * zeroes to the device if they currently do not return zeroes. Optional
2824  * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2825  *
2826  * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2827  */
2828 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2829 {
2830     int64_t target_size;
2831     int64_t ret, nb_sectors, sector_num = 0;
2832     int n;
2833
2834     target_size = bdrv_getlength(bs);
2835     if (target_size < 0) {
2836         return target_size;
2837     }
2838     target_size /= BDRV_SECTOR_SIZE;
2839
2840     for (;;) {
2841         nb_sectors = target_size - sector_num;
2842         if (nb_sectors <= 0) {
2843             return 0;
2844         }
2845         if (nb_sectors > INT_MAX) {
2846             nb_sectors = INT_MAX;
2847         }
2848         ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2849         if (ret < 0) {
2850             error_report("error getting block status at sector %" PRId64 ": %s",
2851                          sector_num, strerror(-ret));
2852             return ret;
2853         }
2854         if (ret & BDRV_BLOCK_ZERO) {
2855             sector_num += n;
2856             continue;
2857         }
2858         ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2859         if (ret < 0) {
2860             error_report("error writing zeroes at sector %" PRId64 ": %s",
2861                          sector_num, strerror(-ret));
2862             return ret;
2863         }
2864         sector_num += n;
2865     }
2866 }
2867
2868 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2869 {
2870     QEMUIOVector qiov;
2871     struct iovec iov = {
2872         .iov_base = (void *)buf,
2873         .iov_len = bytes,
2874     };
2875     int ret;
2876
2877     if (bytes < 0) {
2878         return -EINVAL;
2879     }
2880
2881     qemu_iovec_init_external(&qiov, &iov, 1);
2882     ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2883     if (ret < 0) {
2884         return ret;
2885     }
2886
2887     return bytes;
2888 }
2889
2890 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2891 {
2892     int ret;
2893
2894     ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2895     if (ret < 0) {
2896         return ret;
2897     }
2898
2899     return qiov->size;
2900 }
2901
2902 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2903                 const void *buf, int bytes)
2904 {
2905     QEMUIOVector qiov;
2906     struct iovec iov = {
2907         .iov_base   = (void *) buf,
2908         .iov_len    = bytes,
2909     };
2910
2911     if (bytes < 0) {
2912         return -EINVAL;
2913     }
2914
2915     qemu_iovec_init_external(&qiov, &iov, 1);
2916     return bdrv_pwritev(bs, offset, &qiov);
2917 }
2918
2919 /*
2920  * Writes to the file and ensures that no writes are reordered across this
2921  * request (acts as a barrier)
2922  *
2923  * Returns 0 on success, -errno in error cases.
2924  */
2925 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2926     const void *buf, int count)
2927 {
2928     int ret;
2929
2930     ret = bdrv_pwrite(bs, offset, buf, count);
2931     if (ret < 0) {
2932         return ret;
2933     }
2934
2935     /* No flush needed for cache modes that already do it */
2936     if (bs->enable_write_cache) {
2937         bdrv_flush(bs);
2938     }
2939
2940     return 0;
2941 }
2942
2943 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2944         int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2945 {
2946     /* Perform I/O through a temporary buffer so that users who scribble over
2947      * their read buffer while the operation is in progress do not end up
2948      * modifying the image file.  This is critical for zero-copy guest I/O
2949      * where anything might happen inside guest memory.
2950      */
2951     void *bounce_buffer;
2952
2953     BlockDriver *drv = bs->drv;
2954     struct iovec iov;
2955     QEMUIOVector bounce_qiov;
2956     int64_t cluster_sector_num;
2957     int cluster_nb_sectors;
2958     size_t skip_bytes;
2959     int ret;
2960
2961     /* Cover entire cluster so no additional backing file I/O is required when
2962      * allocating cluster in the image file.
2963      */
2964     bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2965                            &cluster_sector_num, &cluster_nb_sectors);
2966
2967     trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2968                                    cluster_sector_num, cluster_nb_sectors);
2969
2970     iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2971     iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2972     qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2973
2974     ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2975                              &bounce_qiov);
2976     if (ret < 0) {
2977         goto err;
2978     }
2979
2980     if (drv->bdrv_co_write_zeroes &&
2981         buffer_is_zero(bounce_buffer, iov.iov_len)) {
2982         ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2983                                       cluster_nb_sectors, 0);
2984     } else {
2985         /* This does not change the data on the disk, it is not necessary
2986          * to flush even in cache=writethrough mode.
2987          */
2988         ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2989                                   &bounce_qiov);
2990     }
2991
2992     if (ret < 0) {
2993         /* It might be okay to ignore write errors for guest requests.  If this
2994          * is a deliberate copy-on-read then we don't want to ignore the error.
2995          * Simply report it in all cases.
2996          */
2997         goto err;
2998     }
2999
3000     skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
3001     qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
3002                         nb_sectors * BDRV_SECTOR_SIZE);
3003
3004 err:
3005     qemu_vfree(bounce_buffer);
3006     return ret;
3007 }
3008
3009 /*
3010  * Forwards an already correctly aligned request to the BlockDriver. This
3011  * handles copy on read and zeroing after EOF; any other features must be
3012  * implemented by the caller.
3013  */
3014 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
3015     BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3016     int64_t align, QEMUIOVector *qiov, int flags)
3017 {
3018     BlockDriver *drv = bs->drv;
3019     int ret;
3020
3021     int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3022     unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3023
3024     assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3025     assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3026     assert(!qiov || bytes == qiov->size);
3027
3028     /* Handle Copy on Read and associated serialisation */
3029     if (flags & BDRV_REQ_COPY_ON_READ) {
3030         /* If we touch the same cluster it counts as an overlap.  This
3031          * guarantees that allocating writes will be serialized and not race
3032          * with each other for the same cluster.  For example, in copy-on-read
3033          * it ensures that the CoR read and write operations are atomic and
3034          * guest writes cannot interleave between them. */
3035         mark_request_serialising(req, bdrv_get_cluster_size(bs));
3036     }
3037
3038     wait_serialising_requests(req);
3039
3040     if (flags & BDRV_REQ_COPY_ON_READ) {
3041         int pnum;
3042
3043         ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
3044         if (ret < 0) {
3045             goto out;
3046         }
3047
3048         if (!ret || pnum != nb_sectors) {
3049             ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
3050             goto out;
3051         }
3052     }
3053
3054     /* Forward the request to the BlockDriver */
3055     if (!(bs->zero_beyond_eof && bs->growable)) {
3056         ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
3057     } else {
3058         /* Read zeros after EOF of growable BDSes */
3059         int64_t len, total_sectors, max_nb_sectors;
3060
3061         len = bdrv_getlength(bs);
3062         if (len < 0) {
3063             ret = len;
3064             goto out;
3065         }
3066
3067         total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
3068         max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
3069                                   align >> BDRV_SECTOR_BITS);
3070         if (max_nb_sectors > 0) {
3071             QEMUIOVector local_qiov;
3072             size_t local_sectors;
3073
3074             max_nb_sectors = MIN(max_nb_sectors, SIZE_MAX / BDRV_SECTOR_BITS);
3075             local_sectors = MIN(max_nb_sectors, nb_sectors);
3076
3077             qemu_iovec_init(&local_qiov, qiov->niov);
3078             qemu_iovec_concat(&local_qiov, qiov, 0,
3079                               local_sectors * BDRV_SECTOR_SIZE);
3080
3081             ret = drv->bdrv_co_readv(bs, sector_num, local_sectors,
3082                                      &local_qiov);
3083
3084             qemu_iovec_destroy(&local_qiov);
3085         } else {
3086             ret = 0;
3087         }
3088
3089         /* Reading beyond end of file is supposed to produce zeroes */
3090         if (ret == 0 && total_sectors < sector_num + nb_sectors) {
3091             uint64_t offset = MAX(0, total_sectors - sector_num);
3092             uint64_t bytes = (sector_num + nb_sectors - offset) *
3093                               BDRV_SECTOR_SIZE;
3094             qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
3095         }
3096     }
3097
3098 out:
3099     return ret;
3100 }
3101
3102 /*
3103  * Handle a read request in coroutine context
3104  */
3105 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
3106     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3107     BdrvRequestFlags flags)
3108 {
3109     BlockDriver *drv = bs->drv;
3110     BdrvTrackedRequest req;
3111
3112     /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3113     uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3114     uint8_t *head_buf = NULL;
3115     uint8_t *tail_buf = NULL;
3116     QEMUIOVector local_qiov;
3117     bool use_local_qiov = false;
3118     int ret;
3119
3120     if (!drv) {
3121         return -ENOMEDIUM;
3122     }
3123     if (bdrv_check_byte_request(bs, offset, bytes)) {
3124         return -EIO;
3125     }
3126
3127     if (bs->copy_on_read) {
3128         flags |= BDRV_REQ_COPY_ON_READ;
3129     }
3130
3131     /* throttling disk I/O */
3132     if (bs->io_limits_enabled) {
3133         bdrv_io_limits_intercept(bs, bytes, false);
3134     }
3135
3136     /* Align read if necessary by padding qiov */
3137     if (offset & (align - 1)) {
3138         head_buf = qemu_blockalign(bs, align);
3139         qemu_iovec_init(&local_qiov, qiov->niov + 2);
3140         qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3141         qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3142         use_local_qiov = true;
3143
3144         bytes += offset & (align - 1);
3145         offset = offset & ~(align - 1);
3146     }
3147
3148     if ((offset + bytes) & (align - 1)) {
3149         if (!use_local_qiov) {
3150             qemu_iovec_init(&local_qiov, qiov->niov + 1);
3151             qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3152             use_local_qiov = true;
3153         }
3154         tail_buf = qemu_blockalign(bs, align);
3155         qemu_iovec_add(&local_qiov, tail_buf,
3156                        align - ((offset + bytes) & (align - 1)));
3157
3158         bytes = ROUND_UP(bytes, align);
3159     }
3160
3161     tracked_request_begin(&req, bs, offset, bytes, false);
3162     ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3163                               use_local_qiov ? &local_qiov : qiov,
3164                               flags);
3165     tracked_request_end(&req);
3166
3167     if (use_local_qiov) {
3168         qemu_iovec_destroy(&local_qiov);
3169         qemu_vfree(head_buf);
3170         qemu_vfree(tail_buf);
3171     }
3172
3173     return ret;
3174 }
3175
3176 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3177     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3178     BdrvRequestFlags flags)
3179 {
3180     if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3181         return -EINVAL;
3182     }
3183
3184     return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3185                              nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3186 }
3187
3188 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3189     int nb_sectors, QEMUIOVector *qiov)
3190 {
3191     trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3192
3193     return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3194 }
3195
3196 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3197     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3198 {
3199     trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3200
3201     return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3202                             BDRV_REQ_COPY_ON_READ);
3203 }
3204
3205 /* if no limit is specified in the BlockLimits use a default
3206  * of 32768 512-byte sectors (16 MiB) per request.
3207  */
3208 #define MAX_WRITE_ZEROES_DEFAULT 32768
3209
3210 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3211     int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3212 {
3213     BlockDriver *drv = bs->drv;
3214     QEMUIOVector qiov;
3215     struct iovec iov = {0};
3216     int ret = 0;
3217
3218     int max_write_zeroes = bs->bl.max_write_zeroes ?
3219                            bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3220
3221     while (nb_sectors > 0 && !ret) {
3222         int num = nb_sectors;
3223
3224         /* Align request.  Block drivers can expect the "bulk" of the request
3225          * to be aligned.
3226          */
3227         if (bs->bl.write_zeroes_alignment
3228             && num > bs->bl.write_zeroes_alignment) {
3229             if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3230                 /* Make a small request up to the first aligned sector.  */
3231                 num = bs->bl.write_zeroes_alignment;
3232                 num -= sector_num % bs->bl.write_zeroes_alignment;
3233             } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3234                 /* Shorten the request to the last aligned sector.  num cannot
3235                  * underflow because num > bs->bl.write_zeroes_alignment.
3236                  */
3237                 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3238             }
3239         }
3240
3241         /* limit request size */
3242         if (num > max_write_zeroes) {
3243             num = max_write_zeroes;
3244         }
3245
3246         ret = -ENOTSUP;
3247         /* First try the efficient write zeroes operation */
3248         if (drv->bdrv_co_write_zeroes) {
3249             ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3250         }
3251
3252         if (ret == -ENOTSUP) {
3253             /* Fall back to bounce buffer if write zeroes is unsupported */
3254             iov.iov_len = num * BDRV_SECTOR_SIZE;
3255             if (iov.iov_base == NULL) {
3256                 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3257                 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3258             }
3259             qemu_iovec_init_external(&qiov, &iov, 1);
3260
3261             ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3262
3263             /* Keep bounce buffer around if it is big enough for all
3264              * all future requests.
3265              */
3266             if (num < max_write_zeroes) {
3267                 qemu_vfree(iov.iov_base);
3268                 iov.iov_base = NULL;
3269             }
3270         }
3271
3272         sector_num += num;
3273         nb_sectors -= num;
3274     }
3275
3276     qemu_vfree(iov.iov_base);
3277     return ret;
3278 }
3279
3280 /*
3281  * Forwards an already correctly aligned write request to the BlockDriver.
3282  */
3283 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3284     BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3285     QEMUIOVector *qiov, int flags)
3286 {
3287     BlockDriver *drv = bs->drv;
3288     bool waited;
3289     int ret;
3290
3291     int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3292     unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3293
3294     assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3295     assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3296     assert(!qiov || bytes == qiov->size);
3297
3298     waited = wait_serialising_requests(req);
3299     assert(!waited || !req->serialising);
3300     assert(req->overlap_offset <= offset);
3301     assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3302
3303     ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3304
3305     if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
3306         !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_write_zeroes &&
3307         qemu_iovec_is_zero(qiov)) {
3308         flags |= BDRV_REQ_ZERO_WRITE;
3309         if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
3310             flags |= BDRV_REQ_MAY_UNMAP;
3311         }
3312     }
3313
3314     if (ret < 0) {
3315         /* Do nothing, write notifier decided to fail this request */
3316     } else if (flags & BDRV_REQ_ZERO_WRITE) {
3317         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3318         ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3319     } else {
3320         BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3321         ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3322     }
3323     BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3324
3325     if (ret == 0 && !bs->enable_write_cache) {
3326         ret = bdrv_co_flush(bs);
3327     }
3328
3329     bdrv_set_dirty(bs, sector_num, nb_sectors);
3330
3331     if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3332         bs->wr_highest_sector = sector_num + nb_sectors - 1;
3333     }
3334     if (bs->growable && ret >= 0) {
3335         bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3336     }
3337
3338     return ret;
3339 }
3340
3341 /*
3342  * Handle a write request in coroutine context
3343  */
3344 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3345     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3346     BdrvRequestFlags flags)
3347 {
3348     BdrvTrackedRequest req;
3349     /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3350     uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3351     uint8_t *head_buf = NULL;
3352     uint8_t *tail_buf = NULL;
3353     QEMUIOVector local_qiov;
3354     bool use_local_qiov = false;
3355     int ret;
3356
3357     if (!bs->drv) {
3358         return -ENOMEDIUM;
3359     }
3360     if (bs->read_only) {
3361         return -EACCES;
3362     }
3363     if (bdrv_check_byte_request(bs, offset, bytes)) {
3364         return -EIO;
3365     }
3366
3367     /* throttling disk I/O */
3368     if (bs->io_limits_enabled) {
3369         bdrv_io_limits_intercept(bs, bytes, true);
3370     }
3371
3372     /*
3373      * Align write if necessary by performing a read-modify-write cycle.
3374      * Pad qiov with the read parts and be sure to have a tracked request not
3375      * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3376      */
3377     tracked_request_begin(&req, bs, offset, bytes, true);
3378
3379     if (offset & (align - 1)) {
3380         QEMUIOVector head_qiov;
3381         struct iovec head_iov;
3382
3383         mark_request_serialising(&req, align);
3384         wait_serialising_requests(&req);
3385
3386         head_buf = qemu_blockalign(bs, align);
3387         head_iov = (struct iovec) {
3388             .iov_base   = head_buf,
3389             .iov_len    = align,
3390         };
3391         qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3392
3393         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3394         ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3395                                   align, &head_qiov, 0);
3396         if (ret < 0) {
3397             goto fail;
3398         }
3399         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3400
3401         qemu_iovec_init(&local_qiov, qiov->niov + 2);
3402         qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3403         qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3404         use_local_qiov = true;
3405
3406         bytes += offset & (align - 1);
3407         offset = offset & ~(align - 1);
3408     }
3409
3410     if ((offset + bytes) & (align - 1)) {
3411         QEMUIOVector tail_qiov;
3412         struct iovec tail_iov;
3413         size_t tail_bytes;
3414         bool waited;
3415
3416         mark_request_serialising(&req, align);
3417         waited = wait_serialising_requests(&req);
3418         assert(!waited || !use_local_qiov);
3419
3420         tail_buf = qemu_blockalign(bs, align);
3421         tail_iov = (struct iovec) {
3422             .iov_base   = tail_buf,
3423             .iov_len    = align,
3424         };
3425         qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3426
3427         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3428         ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3429                                   align, &tail_qiov, 0);
3430         if (ret < 0) {
3431             goto fail;
3432         }
3433         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3434
3435         if (!use_local_qiov) {
3436             qemu_iovec_init(&local_qiov, qiov->niov + 1);
3437             qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3438             use_local_qiov = true;
3439         }
3440
3441         tail_bytes = (offset + bytes) & (align - 1);
3442         qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3443
3444         bytes = ROUND_UP(bytes, align);
3445     }
3446
3447     ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3448                                use_local_qiov ? &local_qiov : qiov,
3449                                flags);
3450
3451 fail:
3452     tracked_request_end(&req);
3453
3454     if (use_local_qiov) {
3455         qemu_iovec_destroy(&local_qiov);
3456     }
3457     qemu_vfree(head_buf);
3458     qemu_vfree(tail_buf);
3459
3460     return ret;
3461 }
3462
3463 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3464     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3465     BdrvRequestFlags flags)
3466 {
3467     if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3468         return -EINVAL;
3469     }
3470
3471     return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3472                               nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3473 }
3474
3475 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3476     int nb_sectors, QEMUIOVector *qiov)
3477 {
3478     trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3479
3480     return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3481 }
3482
3483 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3484                                       int64_t sector_num, int nb_sectors,
3485                                       BdrvRequestFlags flags)
3486 {
3487     trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3488
3489     if (!(bs->open_flags & BDRV_O_UNMAP)) {
3490         flags &= ~BDRV_REQ_MAY_UNMAP;
3491     }
3492
3493     return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3494                              BDRV_REQ_ZERO_WRITE | flags);
3495 }
3496
3497 /**
3498  * Truncate file to 'offset' bytes (needed only for file protocols)
3499  */
3500 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3501 {
3502     BlockDriver *drv = bs->drv;
3503     int ret;
3504     if (!drv)
3505         return -ENOMEDIUM;
3506     if (!drv->bdrv_truncate)
3507         return -ENOTSUP;
3508     if (bs->read_only)
3509         return -EACCES;
3510
3511     ret = drv->bdrv_truncate(bs, offset);
3512     if (ret == 0) {
3513         ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3514         bdrv_dev_resize_cb(bs);
3515     }
3516     return ret;
3517 }
3518
3519 /**
3520  * Length of a allocated file in bytes. Sparse files are counted by actual
3521  * allocated space. Return < 0 if error or unknown.
3522  */
3523 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3524 {
3525     BlockDriver *drv = bs->drv;
3526     if (!drv) {
3527         return -ENOMEDIUM;
3528     }
3529     if (drv->bdrv_get_allocated_file_size) {
3530         return drv->bdrv_get_allocated_file_size(bs);
3531     }
3532     if (bs->file) {
3533         return bdrv_get_allocated_file_size(bs->file);
3534     }
3535     return -ENOTSUP;
3536 }
3537
3538 /**
3539  * Length of a file in bytes. Return < 0 if error or unknown.
3540  */
3541 int64_t bdrv_getlength(BlockDriverState *bs)
3542 {
3543     BlockDriver *drv = bs->drv;
3544     if (!drv)
3545         return -ENOMEDIUM;
3546
3547     if (drv->has_variable_length) {
3548         int ret = refresh_total_sectors(bs, bs->total_sectors);
3549         if (ret < 0) {
3550             return ret;
3551         }
3552     }
3553     return bs->total_sectors * BDRV_SECTOR_SIZE;
3554 }
3555
3556 /* return 0 as number of sectors if no device present or error */
3557 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3558 {
3559     int64_t length;
3560     length = bdrv_getlength(bs);
3561     if (length < 0)
3562         length = 0;
3563     else
3564         length = length >> BDRV_SECTOR_BITS;
3565     *nb_sectors_ptr = length;
3566 }
3567
3568 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3569                        BlockdevOnError on_write_error)
3570 {
3571     bs->on_read_error = on_read_error;
3572     bs->on_write_error = on_write_error;
3573 }
3574
3575 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3576 {
3577     return is_read ? bs->on_read_error : bs->on_write_error;
3578 }
3579
3580 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3581 {
3582     BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3583
3584     switch (on_err) {
3585     case BLOCKDEV_ON_ERROR_ENOSPC:
3586         return (error == ENOSPC) ?
3587                BLOCK_ERROR_ACTION_STOP : BLOCK_ERROR_ACTION_REPORT;
3588     case BLOCKDEV_ON_ERROR_STOP:
3589         return BLOCK_ERROR_ACTION_STOP;
3590     case BLOCKDEV_ON_ERROR_REPORT:
3591         return BLOCK_ERROR_ACTION_REPORT;
3592     case BLOCKDEV_ON_ERROR_IGNORE:
3593         return BLOCK_ERROR_ACTION_IGNORE;
3594     default:
3595         abort();
3596     }
3597 }
3598
3599 /* This is done by device models because, while the block layer knows
3600  * about the error, it does not know whether an operation comes from
3601  * the device or the block layer (from a job, for example).
3602  */
3603 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3604                        bool is_read, int error)
3605 {
3606     assert(error >= 0);
3607
3608     if (action == BLOCK_ERROR_ACTION_STOP) {
3609         /* First set the iostatus, so that "info block" returns an iostatus
3610          * that matches the events raised so far (an additional error iostatus
3611          * is fine, but not a lost one).
3612          */
3613         bdrv_iostatus_set_err(bs, error);
3614
3615         /* Then raise the request to stop the VM and the event.
3616          * qemu_system_vmstop_request_prepare has two effects.  First,
3617          * it ensures that the STOP event always comes after the
3618          * BLOCK_IO_ERROR event.  Second, it ensures that even if management
3619          * can observe the STOP event and do a "cont" before the STOP
3620          * event is issued, the VM will not stop.  In this case, vm_start()
3621          * also ensures that the STOP/RESUME pair of events is emitted.
3622          */
3623         qemu_system_vmstop_request_prepare();
3624         qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3625                                        is_read ? IO_OPERATION_TYPE_READ :
3626                                        IO_OPERATION_TYPE_WRITE,
3627                                        action, &error_abort);
3628         qemu_system_vmstop_request(RUN_STATE_IO_ERROR);
3629     } else {
3630         qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3631                                        is_read ? IO_OPERATION_TYPE_READ :
3632                                        IO_OPERATION_TYPE_WRITE,
3633                                        action, &error_abort);
3634     }
3635 }
3636
3637 int bdrv_is_read_only(BlockDriverState *bs)
3638 {
3639     return bs->read_only;
3640 }
3641
3642 int bdrv_is_sg(BlockDriverState *bs)
3643 {
3644     return bs->sg;
3645 }
3646
3647 int bdrv_enable_write_cache(BlockDriverState *bs)
3648 {
3649     return bs->enable_write_cache;
3650 }
3651
3652 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3653 {
3654     bs->enable_write_cache = wce;
3655
3656     /* so a reopen() will preserve wce */
3657     if (wce) {
3658         bs->open_flags |= BDRV_O_CACHE_WB;
3659     } else {
3660         bs->open_flags &= ~BDRV_O_CACHE_WB;
3661     }
3662 }
3663
3664 int bdrv_is_encrypted(BlockDriverState *bs)
3665 {
3666     if (bs->backing_hd && bs->backing_hd->encrypted)
3667         return 1;
3668     return bs->encrypted;
3669 }
3670
3671 int bdrv_key_required(BlockDriverState *bs)
3672 {
3673     BlockDriverState *backing_hd = bs->backing_hd;
3674
3675     if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3676         return 1;
3677     return (bs->encrypted && !bs->valid_key);
3678 }
3679
3680 int bdrv_set_key(BlockDriverState *bs, const char *key)
3681 {
3682     int ret;
3683     if (bs->backing_hd && bs->backing_hd->encrypted) {
3684         ret = bdrv_set_key(bs->backing_hd, key);
3685         if (ret < 0)
3686             return ret;
3687         if (!bs->encrypted)
3688             return 0;
3689     }
3690     if (!bs->encrypted) {
3691         return -EINVAL;
3692     } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3693         return -ENOMEDIUM;
3694     }
3695     ret = bs->drv->bdrv_set_key(bs, key);
3696     if (ret < 0) {
3697         bs->valid_key = 0;
3698     } else if (!bs->valid_key) {
3699         bs->valid_key = 1;
3700         /* call the change callback now, we skipped it on open */
3701         bdrv_dev_change_media_cb(bs, true);
3702     }
3703     return ret;
3704 }
3705
3706 const char *bdrv_get_format_name(BlockDriverState *bs)
3707 {
3708     return bs->drv ? bs->drv->format_name : NULL;
3709 }
3710
3711 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3712                          void *opaque)
3713 {
3714     BlockDriver *drv;
3715     int count = 0;
3716     const char **formats = NULL;
3717
3718     QLIST_FOREACH(drv, &bdrv_drivers, list) {
3719         if (drv->format_name) {
3720             bool found = false;
3721             int i = count;
3722             while (formats && i && !found) {
3723                 found = !strcmp(formats[--i], drv->format_name);
3724             }
3725
3726             if (!found) {
3727                 formats = g_realloc(formats, (count + 1) * sizeof(char *));
3728                 formats[count++] = drv->format_name;
3729                 it(opaque, drv->format_name);
3730             }
3731         }
3732     }
3733     g_free(formats);
3734 }
3735
3736 /* This function is to find block backend bs */
3737 BlockDriverState *bdrv_find(const char *name)
3738 {
3739     BlockDriverState *bs;
3740
3741     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3742         if (!strcmp(name, bs->device_name)) {
3743             return bs;
3744         }
3745     }
3746     return NULL;
3747 }
3748
3749 /* This function is to find a node in the bs graph */
3750 BlockDriverState *bdrv_find_node(const char *node_name)
3751 {
3752     BlockDriverState *bs;
3753
3754     assert(node_name);
3755
3756     QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3757         if (!strcmp(node_name, bs->node_name)) {
3758             return bs;
3759         }
3760     }
3761     return NULL;
3762 }
3763
3764 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3765 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3766 {
3767     BlockDeviceInfoList *list, *entry;
3768     BlockDriverState *bs;
3769
3770     list = NULL;
3771     QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3772         entry = g_malloc0(sizeof(*entry));
3773         entry->value = bdrv_block_device_info(bs);
3774         entry->next = list;
3775         list = entry;
3776     }
3777
3778     return list;
3779 }
3780
3781 BlockDriverState *bdrv_lookup_bs(const char *device,
3782                                  const char *node_name,
3783                                  Error **errp)
3784 {
3785     BlockDriverState *bs = NULL;
3786
3787     if (device) {
3788         bs = bdrv_find(device);
3789
3790         if (bs) {
3791             return bs;
3792         }
3793     }
3794
3795     if (node_name) {
3796         bs = bdrv_find_node(node_name);
3797
3798         if (bs) {
3799             return bs;
3800         }
3801     }
3802
3803     error_setg(errp, "Cannot find device=%s nor node_name=%s",
3804                      device ? device : "",
3805                      node_name ? node_name : "");
3806     return NULL;
3807 }
3808
3809 /* If 'base' is in the same chain as 'top', return true. Otherwise,
3810  * return false.  If either argument is NULL, return false. */
3811 bool bdrv_chain_contains(BlockDriverState *top, BlockDriverState *base)
3812 {
3813     while (top && top != base) {
3814         top = top->backing_hd;
3815     }
3816
3817     return top != NULL;
3818 }
3819
3820 BlockDriverState *bdrv_next(BlockDriverState *bs)
3821 {
3822     if (!bs) {
3823         return QTAILQ_FIRST(&bdrv_states);
3824     }
3825     return QTAILQ_NEXT(bs, device_list);
3826 }
3827
3828 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3829 {
3830     BlockDriverState *bs;
3831
3832     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3833         it(opaque, bs);
3834     }
3835 }
3836
3837 const char *bdrv_get_device_name(BlockDriverState *bs)
3838 {
3839     return bs->device_name;
3840 }
3841
3842 int bdrv_get_flags(BlockDriverState *bs)
3843 {
3844     return bs->open_flags;
3845 }
3846
3847 int bdrv_flush_all(void)
3848 {
3849     BlockDriverState *bs;
3850     int result = 0;
3851
3852     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3853         AioContext *aio_context = bdrv_get_aio_context(bs);
3854         int ret;
3855
3856         aio_context_acquire(aio_context);
3857         ret = bdrv_flush(bs);
3858         if (ret < 0 && !result) {
3859             result = ret;
3860         }
3861         aio_context_release(aio_context);
3862     }
3863
3864     return result;
3865 }
3866
3867 int bdrv_has_zero_init_1(BlockDriverState *bs)
3868 {
3869     return 1;
3870 }
3871
3872 int bdrv_has_zero_init(BlockDriverState *bs)
3873 {
3874     assert(bs->drv);
3875
3876     /* If BS is a copy on write image, it is initialized to
3877        the contents of the base image, which may not be zeroes.  */
3878     if (bs->backing_hd) {
3879         return 0;
3880     }
3881     if (bs->drv->bdrv_has_zero_init) {
3882         return bs->drv->bdrv_has_zero_init(bs);
3883     }
3884
3885     /* safe default */
3886     return 0;
3887 }
3888
3889 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3890 {
3891     BlockDriverInfo bdi;
3892
3893     if (bs->backing_hd) {
3894         return false;
3895     }
3896
3897     if (bdrv_get_info(bs, &bdi) == 0) {
3898         return bdi.unallocated_blocks_are_zero;
3899     }
3900
3901     return false;
3902 }
3903
3904 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3905 {
3906     BlockDriverInfo bdi;
3907
3908     if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3909         return false;
3910     }
3911
3912     if (bdrv_get_info(bs, &bdi) == 0) {
3913         return bdi.can_write_zeroes_with_unmap;
3914     }
3915
3916     return false;
3917 }
3918
3919 typedef struct BdrvCoGetBlockStatusData {
3920     BlockDriverState *bs;
3921     BlockDriverState *base;
3922     int64_t sector_num;
3923     int nb_sectors;
3924     int *pnum;
3925     int64_t ret;
3926     bool done;
3927 } BdrvCoGetBlockStatusData;
3928
3929 /*
3930  * Returns true iff the specified sector is present in the disk image. Drivers
3931  * not implementing the functionality are assumed to not support backing files,
3932  * hence all their sectors are reported as allocated.
3933  *
3934  * If 'sector_num' is beyond the end of the disk image the return value is 0
3935  * and 'pnum' is set to 0.
3936  *
3937  * 'pnum' is set to the number of sectors (including and immediately following
3938  * the specified sector) that are known to be in the same
3939  * allocated/unallocated state.
3940  *
3941  * 'nb_sectors' is the max value 'pnum' should be set to.  If nb_sectors goes
3942  * beyond the end of the disk image it will be clamped.
3943  */
3944 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3945                                                      int64_t sector_num,
3946                                                      int nb_sectors, int *pnum)
3947 {
3948     int64_t length;
3949     int64_t n;
3950     int64_t ret, ret2;
3951
3952     length = bdrv_getlength(bs);
3953     if (length < 0) {
3954         return length;
3955     }
3956
3957     if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3958         *pnum = 0;
3959         return 0;
3960     }
3961
3962     n = bs->total_sectors - sector_num;
3963     if (n < nb_sectors) {
3964         nb_sectors = n;
3965     }
3966
3967     if (!bs->drv->bdrv_co_get_block_status) {
3968         *pnum = nb_sectors;
3969         ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
3970         if (bs->drv->protocol_name) {
3971             ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3972         }
3973         return ret;
3974     }
3975
3976     ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3977     if (ret < 0) {
3978         *pnum = 0;
3979         return ret;
3980     }
3981
3982     if (ret & BDRV_BLOCK_RAW) {
3983         assert(ret & BDRV_BLOCK_OFFSET_VALID);
3984         return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3985                                      *pnum, pnum);
3986     }
3987
3988     if (ret & (BDRV_BLOCK_DATA | BDRV_BLOCK_ZERO)) {
3989         ret |= BDRV_BLOCK_ALLOCATED;
3990     }
3991
3992     if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3993         if (bdrv_unallocated_blocks_are_zero(bs)) {
3994             ret |= BDRV_BLOCK_ZERO;
3995         } else if (bs->backing_hd) {
3996             BlockDriverState *bs2 = bs->backing_hd;
3997             int64_t length2 = bdrv_getlength(bs2);
3998             if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3999                 ret |= BDRV_BLOCK_ZERO;
4000             }
4001         }
4002     }
4003
4004     if (bs->file &&
4005         (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
4006         (ret & BDRV_BLOCK_OFFSET_VALID)) {
4007         ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
4008                                         *pnum, pnum);
4009         if (ret2 >= 0) {
4010             /* Ignore errors.  This is just providing extra information, it
4011              * is useful but not necessary.
4012              */
4013             ret |= (ret2 & BDRV_BLOCK_ZERO);
4014         }
4015     }
4016
4017     return ret;
4018 }
4019
4020 /* Coroutine wrapper for bdrv_get_block_status() */
4021 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
4022 {
4023     BdrvCoGetBlockStatusData *data = opaque;
4024     BlockDriverState *bs = data->bs;
4025
4026     data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
4027                                          data->pnum);
4028     data->done = true;
4029 }
4030
4031 /*
4032  * Synchronous wrapper around bdrv_co_get_block_status().
4033  *
4034  * See bdrv_co_get_block_status() for details.
4035  */
4036 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
4037                               int nb_sectors, int *pnum)
4038 {
4039     Coroutine *co;
4040     BdrvCoGetBlockStatusData data = {
4041         .bs = bs,
4042         .sector_num = sector_num,
4043         .nb_sectors = nb_sectors,
4044         .pnum = pnum,
4045         .done = false,
4046     };
4047
4048     if (qemu_in_coroutine()) {
4049         /* Fast-path if already in coroutine context */
4050         bdrv_get_block_status_co_entry(&data);
4051     } else {
4052         AioContext *aio_context = bdrv_get_aio_context(bs);
4053
4054         co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
4055         qemu_coroutine_enter(co, &data);
4056         while (!data.done) {
4057             aio_poll(aio_context, true);
4058         }
4059     }
4060     return data.ret;
4061 }
4062
4063 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
4064                                    int nb_sectors, int *pnum)
4065 {
4066     int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
4067     if (ret < 0) {
4068         return ret;
4069     }
4070     return !!(ret & BDRV_BLOCK_ALLOCATED);
4071 }
4072
4073 /*
4074  * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
4075  *
4076  * Return true if the given sector is allocated in any image between
4077  * BASE and TOP (inclusive).  BASE can be NULL to check if the given
4078  * sector is allocated in any image of the chain.  Return false otherwise.
4079  *
4080  * 'pnum' is set to the number of sectors (including and immediately following
4081  *  the specified sector) that are known to be in the same
4082  *  allocated/unallocated state.
4083  *
4084  */
4085 int bdrv_is_allocated_above(BlockDriverState *top,
4086                             BlockDriverState *base,
4087                             int64_t sector_num,
4088                             int nb_sectors, int *pnum)
4089 {
4090     BlockDriverState *intermediate;
4091     int ret, n = nb_sectors;
4092
4093     intermediate = top;
4094     while (intermediate && intermediate != base) {
4095         int pnum_inter;
4096         ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
4097                                 &pnum_inter);
4098         if (ret < 0) {
4099             return ret;
4100         } else if (ret) {
4101             *pnum = pnum_inter;
4102             return 1;
4103         }
4104
4105         /*
4106          * [sector_num, nb_sectors] is unallocated on top but intermediate
4107          * might have
4108          *
4109          * [sector_num+x, nr_sectors] allocated.
4110          */
4111         if (n > pnum_inter &&
4112             (intermediate == top ||
4113              sector_num + pnum_inter < intermediate->total_sectors)) {
4114             n = pnum_inter;
4115         }
4116
4117         intermediate = intermediate->backing_hd;
4118     }
4119
4120     *pnum = n;
4121     return 0;
4122 }
4123
4124 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
4125 {
4126     if (bs->backing_hd && bs->backing_hd->encrypted)
4127         return bs->backing_file;
4128     else if (bs->encrypted)
4129         return bs->filename;
4130     else
4131         return NULL;
4132 }
4133
4134 void bdrv_get_backing_filename(BlockDriverState *bs,
4135                                char *filename, int filename_size)
4136 {
4137     pstrcpy(filename, filename_size, bs->backing_file);
4138 }
4139
4140 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
4141                           const uint8_t *buf, int nb_sectors)
4142 {
4143     BlockDriver *drv = bs->drv;
4144     if (!drv)
4145         return -ENOMEDIUM;
4146     if (!drv->bdrv_write_compressed)
4147         return -ENOTSUP;
4148     if (bdrv_check_request(bs, sector_num, nb_sectors))
4149         return -EIO;
4150
4151     assert(QLIST_EMPTY(&bs->dirty_bitmaps));
4152
4153     return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
4154 }
4155
4156 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
4157 {
4158     BlockDriver *drv = bs->drv;
4159     if (!drv)
4160         return -ENOMEDIUM;
4161     if (!drv->bdrv_get_info)
4162         return -ENOTSUP;
4163     memset(bdi, 0, sizeof(*bdi));
4164     return drv->bdrv_get_info(bs, bdi);
4165 }
4166
4167 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
4168 {
4169     BlockDriver *drv = bs->drv;
4170     if (drv && drv->bdrv_get_specific_info) {
4171         return drv->bdrv_get_specific_info(bs);
4172     }
4173     return NULL;
4174 }
4175
4176 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
4177                       int64_t pos, int size)
4178 {
4179     QEMUIOVector qiov;
4180     struct iovec iov = {
4181         .iov_base   = (void *) buf,
4182         .iov_len    = size,
4183     };
4184
4185     qemu_iovec_init_external(&qiov, &iov, 1);
4186     return bdrv_writev_vmstate(bs, &qiov, pos);
4187 }
4188
4189 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
4190 {
4191     BlockDriver *drv = bs->drv;
4192
4193     if (!drv) {
4194         return -ENOMEDIUM;
4195     } else if (drv->bdrv_save_vmstate) {
4196         return drv->bdrv_save_vmstate(bs, qiov, pos);
4197     } else if (bs->file) {
4198         return bdrv_writev_vmstate(bs->file, qiov, pos);
4199     }
4200
4201     return -ENOTSUP;
4202 }
4203
4204 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
4205                       int64_t pos, int size)
4206 {
4207     BlockDriver *drv = bs->drv;
4208     if (!drv)
4209         return -ENOMEDIUM;
4210     if (drv->bdrv_load_vmstate)
4211         return drv->bdrv_load_vmstate(bs, buf, pos, size);
4212     if (bs->file)
4213         return bdrv_load_vmstate(bs->file, buf, pos, size);
4214     return -ENOTSUP;
4215 }
4216
4217 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4218 {
4219     if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4220         return;
4221     }
4222
4223     bs->drv->bdrv_debug_event(bs, event);
4224 }
4225
4226 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4227                           const char *tag)
4228 {
4229     while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4230         bs = bs->file;
4231     }
4232
4233     if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4234         return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4235     }
4236
4237     return -ENOTSUP;
4238 }
4239
4240 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4241 {
4242     while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4243         bs = bs->file;
4244     }
4245
4246     if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4247         return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4248     }
4249
4250     return -ENOTSUP;
4251 }
4252
4253 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4254 {
4255     while (bs && (!bs->drv || !bs->drv->bdrv_debug_resume)) {
4256         bs = bs->file;
4257     }
4258
4259     if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4260         return bs->drv->bdrv_debug_resume(bs, tag);
4261     }
4262
4263     return -ENOTSUP;
4264 }
4265
4266 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4267 {
4268     while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4269         bs = bs->file;
4270     }
4271
4272     if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4273         return bs->drv->bdrv_debug_is_suspended(bs, tag);
4274     }
4275
4276     return false;
4277 }
4278
4279 int bdrv_is_snapshot(BlockDriverState *bs)
4280 {
4281     return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4282 }
4283
4284 /* backing_file can either be relative, or absolute, or a protocol.  If it is
4285  * relative, it must be relative to the chain.  So, passing in bs->filename
4286  * from a BDS as backing_file should not be done, as that may be relative to
4287  * the CWD rather than the chain. */
4288 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4289         const char *backing_file)
4290 {
4291     char *filename_full = NULL;
4292     char *backing_file_full = NULL;
4293     char *filename_tmp = NULL;
4294     int is_protocol = 0;
4295     BlockDriverState *curr_bs = NULL;
4296     BlockDriverState *retval = NULL;
4297
4298     if (!bs || !bs->drv || !backing_file) {
4299         return NULL;
4300     }
4301
4302     filename_full     = g_malloc(PATH_MAX);
4303     backing_file_full = g_malloc(PATH_MAX);
4304     filename_tmp      = g_malloc(PATH_MAX);
4305
4306     is_protocol = path_has_protocol(backing_file);
4307
4308     for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4309
4310         /* If either of the filename paths is actually a protocol, then
4311          * compare unmodified paths; otherwise make paths relative */
4312         if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4313             if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4314                 retval = curr_bs->backing_hd;
4315                 break;
4316             }
4317         } else {
4318             /* If not an absolute filename path, make it relative to the current
4319              * image's filename path */
4320             path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4321                          backing_file);
4322
4323             /* We are going to compare absolute pathnames */
4324             if (!realpath(filename_tmp, filename_full)) {
4325                 continue;
4326             }
4327
4328             /* We need to make sure the backing filename we are comparing against
4329              * is relative to the current image filename (or absolute) */
4330             path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4331                          curr_bs->backing_file);
4332
4333             if (!realpath(filename_tmp, backing_file_full)) {
4334                 continue;
4335             }
4336
4337             if (strcmp(backing_file_full, filename_full) == 0) {
4338                 retval = curr_bs->backing_hd;
4339                 break;
4340             }
4341         }
4342     }
4343
4344     g_free(filename_full);
4345     g_free(backing_file_full);
4346     g_free(filename_tmp);
4347     return retval;
4348 }
4349
4350 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4351 {
4352     if (!bs->drv) {
4353         return 0;
4354     }
4355
4356     if (!bs->backing_hd) {
4357         return 0;
4358     }
4359
4360     return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4361 }
4362
4363 /**************************************************************/
4364 /* async I/Os */
4365
4366 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4367                                  QEMUIOVector *qiov, int nb_sectors,
4368                                  BlockDriverCompletionFunc *cb, void *opaque)
4369 {
4370     trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4371
4372     return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4373                                  cb, opaque, false);
4374 }
4375
4376 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4377                                   QEMUIOVector *qiov, int nb_sectors,
4378                                   BlockDriverCompletionFunc *cb, void *opaque)
4379 {
4380     trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4381
4382     return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4383                                  cb, opaque, true);
4384 }
4385
4386 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4387         int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4388         BlockDriverCompletionFunc *cb, void *opaque)
4389 {
4390     trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4391
4392     return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4393                                  BDRV_REQ_ZERO_WRITE | flags,
4394                                  cb, opaque, true);
4395 }
4396
4397
4398 typedef struct MultiwriteCB {
4399     int error;
4400     int num_requests;
4401     int num_callbacks;
4402     struct {
4403         BlockDriverCompletionFunc *cb;
4404         void *opaque;
4405         QEMUIOVector *free_qiov;
4406     } callbacks[];
4407 } MultiwriteCB;
4408
4409 static void multiwrite_user_cb(MultiwriteCB *mcb)
4410 {
4411     int i;
4412
4413     for (i = 0; i < mcb->num_callbacks; i++) {
4414         mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4415         if (mcb->callbacks[i].free_qiov) {
4416             qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4417         }
4418         g_free(mcb->callbacks[i].free_qiov);
4419     }
4420 }
4421
4422 static void multiwrite_cb(void *opaque, int ret)
4423 {
4424     MultiwriteCB *mcb = opaque;
4425
4426     trace_multiwrite_cb(mcb, ret);
4427
4428     if (ret < 0 && !mcb->error) {
4429         mcb->error = ret;
4430     }
4431
4432     mcb->num_requests--;
4433     if (mcb->num_requests == 0) {
4434         multiwrite_user_cb(mcb);
4435         g_free(mcb);
4436     }
4437 }
4438
4439 static int multiwrite_req_compare(const void *a, const void *b)
4440 {
4441     const BlockRequest *req1 = a, *req2 = b;
4442
4443     /*
4444      * Note that we can't simply subtract req2->sector from req1->sector
4445      * here as that could overflow the return value.
4446      */
4447     if (req1->sector > req2->sector) {
4448         return 1;
4449     } else if (req1->sector < req2->sector) {
4450         return -1;
4451     } else {
4452         return 0;
4453     }
4454 }
4455
4456 /*
4457  * Takes a bunch of requests and tries to merge them. Returns the number of
4458  * requests that remain after merging.
4459  */
4460 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4461     int num_reqs, MultiwriteCB *mcb)
4462 {
4463     int i, outidx;
4464
4465     // Sort requests by start sector
4466     qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4467
4468     // Check if adjacent requests touch the same clusters. If so, combine them,
4469     // filling up gaps with zero sectors.
4470     outidx = 0;
4471     for (i = 1; i < num_reqs; i++) {
4472         int merge = 0;
4473         int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4474
4475         // Handle exactly sequential writes and overlapping writes.
4476         if (reqs[i].sector <= oldreq_last) {
4477             merge = 1;
4478         }
4479
4480         if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4481             merge = 0;
4482         }
4483
4484         if (merge) {
4485             size_t size;
4486             QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4487             qemu_iovec_init(qiov,
4488                 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4489
4490             // Add the first request to the merged one. If the requests are
4491             // overlapping, drop the last sectors of the first request.
4492             size = (reqs[i].sector - reqs[outidx].sector) << 9;
4493             qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4494
4495             // We should need to add any zeros between the two requests
4496             assert (reqs[i].sector <= oldreq_last);
4497
4498             // Add the second request
4499             qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4500
4501             reqs[outidx].nb_sectors = qiov->size >> 9;
4502             reqs[outidx].qiov = qiov;
4503
4504             mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4505         } else {
4506             outidx++;
4507             reqs[outidx].sector     = reqs[i].sector;
4508             reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4509             reqs[outidx].qiov       = reqs[i].qiov;
4510         }
4511     }
4512
4513     return outidx + 1;
4514 }
4515
4516 /*
4517  * Submit multiple AIO write requests at once.
4518  *
4519  * On success, the function returns 0 and all requests in the reqs array have
4520  * been submitted. In error case this function returns -1, and any of the
4521  * requests may or may not be submitted yet. In particular, this means that the
4522  * callback will be called for some of the requests, for others it won't. The
4523  * caller must check the error field of the BlockRequest to wait for the right
4524  * callbacks (if error != 0, no callback will be called).
4525  *
4526  * The implementation may modify the contents of the reqs array, e.g. to merge
4527  * requests. However, the fields opaque and error are left unmodified as they
4528  * are used to signal failure for a single request to the caller.
4529  */
4530 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4531 {
4532     MultiwriteCB *mcb;
4533     int i;
4534
4535     /* don't submit writes if we don't have a medium */
4536     if (bs->drv == NULL) {
4537         for (i = 0; i < num_reqs; i++) {
4538             reqs[i].error = -ENOMEDIUM;
4539         }
4540         return -1;
4541     }
4542
4543     if (num_reqs == 0) {
4544         return 0;
4545     }
4546
4547     // Create MultiwriteCB structure
4548     mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4549     mcb->num_requests = 0;
4550     mcb->num_callbacks = num_reqs;
4551
4552     for (i = 0; i < num_reqs; i++) {
4553         mcb->callbacks[i].cb = reqs[i].cb;
4554         mcb->callbacks[i].opaque = reqs[i].opaque;
4555     }
4556
4557     // Check for mergable requests
4558     num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4559
4560     trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4561
4562     /* Run the aio requests. */
4563     mcb->num_requests = num_reqs;
4564     for (i = 0; i < num_reqs; i++) {
4565         bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4566                               reqs[i].nb_sectors, reqs[i].flags,
4567                               multiwrite_cb, mcb,
4568                               true);
4569     }
4570
4571     return 0;
4572 }
4573
4574 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4575 {
4576     acb->aiocb_info->cancel(acb);
4577 }
4578
4579 /**************************************************************/
4580 /* async block device emulation */
4581
4582 typedef struct BlockDriverAIOCBSync {
4583     BlockDriverAIOCB common;
4584     QEMUBH *bh;
4585     int ret;
4586     /* vector translation state */
4587     QEMUIOVector *qiov;
4588     uint8_t *bounce;
4589     int is_write;
4590 } BlockDriverAIOCBSync;
4591
4592 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4593 {
4594     BlockDriverAIOCBSync *acb =
4595         container_of(blockacb, BlockDriverAIOCBSync, common);
4596     qemu_bh_delete(acb->bh);
4597     acb->bh = NULL;
4598     qemu_aio_release(acb);
4599 }
4600
4601 static const AIOCBInfo bdrv_em_aiocb_info = {
4602     .aiocb_size         = sizeof(BlockDriverAIOCBSync),
4603     .cancel             = bdrv_aio_cancel_em,
4604 };
4605
4606 static void bdrv_aio_bh_cb(void *opaque)
4607 {
4608     BlockDriverAIOCBSync *acb = opaque;
4609
4610     if (!acb->is_write)
4611         qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4612     qemu_vfree(acb->bounce);
4613     acb->common.cb(acb->common.opaque, acb->ret);
4614     qemu_bh_delete(acb->bh);
4615     acb->bh = NULL;
4616     qemu_aio_release(acb);
4617 }
4618
4619 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4620                                             int64_t sector_num,
4621                                             QEMUIOVector *qiov,
4622                                             int nb_sectors,
4623                                             BlockDriverCompletionFunc *cb,
4624                                             void *opaque,
4625                                             int is_write)
4626
4627 {
4628     BlockDriverAIOCBSync *acb;
4629
4630     acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4631     acb->is_write = is_write;
4632     acb->qiov = qiov;
4633     acb->bounce = qemu_blockalign(bs, qiov->size);
4634     acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_aio_bh_cb, acb);
4635
4636     if (is_write) {
4637         qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4638         acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4639     } else {
4640         acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4641     }
4642
4643     qemu_bh_schedule(acb->bh);
4644
4645     return &acb->common;
4646 }
4647
4648 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4649         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4650         BlockDriverCompletionFunc *cb, void *opaque)
4651 {
4652     return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4653 }
4654
4655 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4656         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4657         BlockDriverCompletionFunc *cb, void *opaque)
4658 {
4659     return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4660 }
4661
4662
4663 typedef struct BlockDriverAIOCBCoroutine {
4664     BlockDriverAIOCB common;
4665     BlockRequest req;
4666     bool is_write;
4667     bool *done;
4668     QEMUBH* bh;
4669 } BlockDriverAIOCBCoroutine;
4670
4671 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4672 {
4673     AioContext *aio_context = bdrv_get_aio_context(blockacb->bs);
4674     BlockDriverAIOCBCoroutine *acb =
4675         container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4676     bool done = false;
4677
4678     acb->done = &done;
4679     while (!done) {
4680         aio_poll(aio_context, true);
4681     }
4682 }
4683
4684 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4685     .aiocb_size         = sizeof(BlockDriverAIOCBCoroutine),
4686     .cancel             = bdrv_aio_co_cancel_em,
4687 };
4688
4689 static void bdrv_co_em_bh(void *opaque)
4690 {
4691     BlockDriverAIOCBCoroutine *acb = opaque;
4692
4693     acb->common.cb(acb->common.opaque, acb->req.error);
4694
4695     if (acb->done) {
4696         *acb->done = true;
4697     }
4698
4699     qemu_bh_delete(acb->bh);
4700     qemu_aio_release(acb);
4701 }
4702
4703 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4704 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4705 {
4706     BlockDriverAIOCBCoroutine *acb = opaque;
4707     BlockDriverState *bs = acb->common.bs;
4708
4709     if (!acb->is_write) {
4710         acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4711             acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4712     } else {
4713         acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4714             acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4715     }
4716
4717     acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4718     qemu_bh_schedule(acb->bh);
4719 }
4720
4721 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4722                                                int64_t sector_num,
4723                                                QEMUIOVector *qiov,
4724                                                int nb_sectors,
4725                                                BdrvRequestFlags flags,
4726                                                BlockDriverCompletionFunc *cb,
4727                                                void *opaque,
4728                                                bool is_write)
4729 {
4730     Coroutine *co;
4731     BlockDriverAIOCBCoroutine *acb;
4732
4733     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4734     acb->req.sector = sector_num;
4735     acb->req.nb_sectors = nb_sectors;
4736     acb->req.qiov = qiov;
4737     acb->req.flags = flags;
4738     acb->is_write = is_write;
4739     acb->done = NULL;
4740
4741     co = qemu_coroutine_create(bdrv_co_do_rw);
4742     qemu_coroutine_enter(co, acb);
4743
4744     return &acb->common;
4745 }
4746
4747 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4748 {
4749     BlockDriverAIOCBCoroutine *acb = opaque;
4750     BlockDriverState *bs = acb->common.bs;
4751
4752     acb->req.error = bdrv_co_flush(bs);
4753     acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4754     qemu_bh_schedule(acb->bh);
4755 }
4756
4757 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4758         BlockDriverCompletionFunc *cb, void *opaque)
4759 {
4760     trace_bdrv_aio_flush(bs, opaque);
4761
4762     Coroutine *co;
4763     BlockDriverAIOCBCoroutine *acb;
4764
4765     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4766     acb->done = NULL;
4767
4768     co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4769     qemu_coroutine_enter(co, acb);
4770
4771     return &acb->common;
4772 }
4773
4774 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4775 {
4776     BlockDriverAIOCBCoroutine *acb = opaque;
4777     BlockDriverState *bs = acb->common.bs;
4778
4779     acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4780     acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4781     qemu_bh_schedule(acb->bh);
4782 }
4783
4784 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4785         int64_t sector_num, int nb_sectors,
4786         BlockDriverCompletionFunc *cb, void *opaque)
4787 {
4788     Coroutine *co;
4789     BlockDriverAIOCBCoroutine *acb;
4790
4791     trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4792
4793     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4794     acb->req.sector = sector_num;
4795     acb->req.nb_sectors = nb_sectors;
4796     acb->done = NULL;
4797     co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4798     qemu_coroutine_enter(co, acb);
4799
4800     return &acb->common;
4801 }
4802
4803 void bdrv_init(void)
4804 {
4805     module_call_init(MODULE_INIT_BLOCK);
4806 }
4807
4808 void bdrv_init_with_whitelist(void)
4809 {
4810     use_bdrv_whitelist = 1;
4811     bdrv_init();
4812 }
4813
4814 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4815                    BlockDriverCompletionFunc *cb, void *opaque)
4816 {
4817     BlockDriverAIOCB *acb;
4818
4819     acb = g_slice_alloc(aiocb_info->aiocb_size);
4820     acb->aiocb_info = aiocb_info;
4821     acb->bs = bs;
4822     acb->cb = cb;
4823     acb->opaque = opaque;
4824     return acb;
4825 }
4826
4827 void qemu_aio_release(void *p)
4828 {
4829     BlockDriverAIOCB *acb = p;
4830     g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4831 }
4832
4833 /**************************************************************/
4834 /* Coroutine block device emulation */
4835
4836 typedef struct CoroutineIOCompletion {
4837     Coroutine *coroutine;
4838     int ret;
4839 } CoroutineIOCompletion;
4840
4841 static void bdrv_co_io_em_complete(void *opaque, int ret)
4842 {
4843     CoroutineIOCompletion *co = opaque;
4844
4845     co->ret = ret;
4846     qemu_coroutine_enter(co->coroutine, NULL);
4847 }
4848
4849 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4850                                       int nb_sectors, QEMUIOVector *iov,
4851                                       bool is_write)
4852 {
4853     CoroutineIOCompletion co = {
4854         .coroutine = qemu_coroutine_self(),
4855     };
4856     BlockDriverAIOCB *acb;
4857
4858     if (is_write) {
4859         acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4860                                        bdrv_co_io_em_complete, &co);
4861     } else {
4862         acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4863                                       bdrv_co_io_em_complete, &co);
4864     }
4865
4866     trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4867     if (!acb) {
4868         return -EIO;
4869     }
4870     qemu_coroutine_yield();
4871
4872     return co.ret;
4873 }
4874
4875 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4876                                          int64_t sector_num, int nb_sectors,
4877                                          QEMUIOVector *iov)
4878 {
4879     return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4880 }
4881
4882 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4883                                          int64_t sector_num, int nb_sectors,
4884                                          QEMUIOVector *iov)
4885 {
4886     return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4887 }
4888
4889 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4890 {
4891     RwCo *rwco = opaque;
4892
4893     rwco->ret = bdrv_co_flush(rwco->bs);
4894 }
4895
4896 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4897 {
4898     int ret;
4899
4900     if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4901         return 0;
4902     }
4903
4904     /* Write back cached data to the OS even with cache=unsafe */
4905     BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4906     if (bs->drv->bdrv_co_flush_to_os) {
4907         ret = bs->drv->bdrv_co_flush_to_os(bs);
4908         if (ret < 0) {
4909             return ret;
4910         }
4911     }
4912
4913     /* But don't actually force it to the disk with cache=unsafe */
4914     if (bs->open_flags & BDRV_O_NO_FLUSH) {
4915         goto flush_parent;
4916     }
4917
4918     BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4919     if (bs->drv->bdrv_co_flush_to_disk) {
4920         ret = bs->drv->bdrv_co_flush_to_disk(bs);
4921     } else if (bs->drv->bdrv_aio_flush) {
4922         BlockDriverAIOCB *acb;
4923         CoroutineIOCompletion co = {
4924             .coroutine = qemu_coroutine_self(),
4925         };
4926
4927         acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4928         if (acb == NULL) {
4929             ret = -EIO;
4930         } else {
4931             qemu_coroutine_yield();
4932             ret = co.ret;
4933         }
4934     } else {
4935         /*
4936          * Some block drivers always operate in either writethrough or unsafe
4937          * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4938          * know how the server works (because the behaviour is hardcoded or
4939          * depends on server-side configuration), so we can't ensure that
4940          * everything is safe on disk. Returning an error doesn't work because
4941          * that would break guests even if the server operates in writethrough
4942          * mode.
4943          *
4944          * Let's hope the user knows what he's doing.
4945          */
4946         ret = 0;
4947     }
4948     if (ret < 0) {
4949         return ret;
4950     }
4951
4952     /* Now flush the underlying protocol.  It will also have BDRV_O_NO_FLUSH
4953      * in the case of cache=unsafe, so there are no useless flushes.
4954      */
4955 flush_parent:
4956     return bdrv_co_flush(bs->file);
4957 }
4958
4959 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp)
4960 {
4961     Error *local_err = NULL;
4962     int ret;
4963
4964     if (!bs->drv)  {
4965         return;
4966     }
4967
4968     if (bs->drv->bdrv_invalidate_cache) {
4969         bs->drv->bdrv_invalidate_cache(bs, &local_err);
4970     } else if (bs->file) {
4971         bdrv_invalidate_cache(bs->file, &local_err);
4972     }
4973     if (local_err) {
4974         error_propagate(errp, local_err);
4975         return;
4976     }
4977
4978     ret = refresh_total_sectors(bs, bs->total_sectors);
4979     if (ret < 0) {
4980         error_setg_errno(errp, -ret, "Could not refresh total sector count");
4981         return;
4982     }
4983 }
4984
4985 void bdrv_invalidate_cache_all(Error **errp)
4986 {
4987     BlockDriverState *bs;
4988     Error *local_err = NULL;
4989
4990     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4991         AioContext *aio_context = bdrv_get_aio_context(bs);
4992
4993         aio_context_acquire(aio_context);
4994         bdrv_invalidate_cache(bs, &local_err);
4995         aio_context_release(aio_context);
4996         if (local_err) {
4997             error_propagate(errp, local_err);
4998             return;
4999         }
5000     }
5001 }
5002
5003 void bdrv_clear_incoming_migration_all(void)
5004 {
5005     BlockDriverState *bs;
5006
5007     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5008         AioContext *aio_context = bdrv_get_aio_context(bs);
5009
5010         aio_context_acquire(aio_context);
5011         bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
5012         aio_context_release(aio_context);
5013     }
5014 }
5015
5016 int bdrv_flush(BlockDriverState *bs)
5017 {
5018     Coroutine *co;
5019     RwCo rwco = {
5020         .bs = bs,
5021         .ret = NOT_DONE,
5022     };
5023
5024     if (qemu_in_coroutine()) {
5025         /* Fast-path if already in coroutine context */
5026         bdrv_flush_co_entry(&rwco);
5027     } else {
5028         AioContext *aio_context = bdrv_get_aio_context(bs);
5029
5030         co = qemu_coroutine_create(bdrv_flush_co_entry);
5031         qemu_coroutine_enter(co, &rwco);
5032         while (rwco.ret == NOT_DONE) {
5033             aio_poll(aio_context, true);
5034         }
5035     }
5036
5037     return rwco.ret;
5038 }
5039
5040 typedef struct DiscardCo {
5041     BlockDriverState *bs;
5042     int64_t sector_num;
5043     int nb_sectors;
5044     int ret;
5045 } DiscardCo;
5046 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
5047 {
5048     DiscardCo *rwco = opaque;
5049
5050     rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
5051 }
5052
5053 /* if no limit is specified in the BlockLimits use a default
5054  * of 32768 512-byte sectors (16 MiB) per request.
5055  */
5056 #define MAX_DISCARD_DEFAULT 32768
5057
5058 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
5059                                  int nb_sectors)
5060 {
5061     int max_discard;
5062
5063     if (!bs->drv) {
5064         return -ENOMEDIUM;
5065     } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
5066         return -EIO;
5067     } else if (bs->read_only) {
5068         return -EROFS;
5069     }
5070
5071     bdrv_reset_dirty(bs, sector_num, nb_sectors);
5072
5073     /* Do nothing if disabled.  */
5074     if (!(bs->open_flags & BDRV_O_UNMAP)) {
5075         return 0;
5076     }
5077
5078     if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
5079         return 0;
5080     }
5081
5082     max_discard = bs->bl.max_discard ?  bs->bl.max_discard : MAX_DISCARD_DEFAULT;
5083     while (nb_sectors > 0) {
5084         int ret;
5085         int num = nb_sectors;
5086
5087         /* align request */
5088         if (bs->bl.discard_alignment &&
5089             num >= bs->bl.discard_alignment &&
5090             sector_num % bs->bl.discard_alignment) {
5091             if (num > bs->bl.discard_alignment) {
5092                 num = bs->bl.discard_alignment;
5093             }
5094             num -= sector_num % bs->bl.discard_alignment;
5095         }
5096
5097         /* limit request size */
5098         if (num > max_discard) {
5099             num = max_discard;
5100         }
5101
5102         if (bs->drv->bdrv_co_discard) {
5103             ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
5104         } else {
5105             BlockDriverAIOCB *acb;
5106             CoroutineIOCompletion co = {
5107                 .coroutine = qemu_coroutine_self(),
5108             };
5109
5110             acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
5111                                             bdrv_co_io_em_complete, &co);
5112             if (acb == NULL) {
5113                 return -EIO;
5114             } else {
5115                 qemu_coroutine_yield();
5116                 ret = co.ret;
5117             }
5118         }
5119         if (ret && ret != -ENOTSUP) {
5120             return ret;
5121         }
5122
5123         sector_num += num;
5124         nb_sectors -= num;
5125     }
5126     return 0;
5127 }
5128
5129 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
5130 {
5131     Coroutine *co;
5132     DiscardCo rwco = {
5133         .bs = bs,
5134         .sector_num = sector_num,
5135         .nb_sectors = nb_sectors,
5136         .ret = NOT_DONE,
5137     };
5138
5139     if (qemu_in_coroutine()) {
5140         /* Fast-path if already in coroutine context */
5141         bdrv_discard_co_entry(&rwco);
5142     } else {
5143         AioContext *aio_context = bdrv_get_aio_context(bs);
5144
5145         co = qemu_coroutine_create(bdrv_discard_co_entry);
5146         qemu_coroutine_enter(co, &rwco);
5147         while (rwco.ret == NOT_DONE) {
5148             aio_poll(aio_context, true);
5149         }
5150     }
5151
5152     return rwco.ret;
5153 }
5154
5155 /**************************************************************/
5156 /* removable device support */
5157
5158 /**
5159  * Return TRUE if the media is present
5160  */
5161 int bdrv_is_inserted(BlockDriverState *bs)
5162 {
5163     BlockDriver *drv = bs->drv;
5164
5165     if (!drv)
5166         return 0;
5167     if (!drv->bdrv_is_inserted)
5168         return 1;
5169     return drv->bdrv_is_inserted(bs);
5170 }
5171
5172 /**
5173  * Return whether the media changed since the last call to this
5174  * function, or -ENOTSUP if we don't know.  Most drivers don't know.
5175  */
5176 int bdrv_media_changed(BlockDriverState *bs)
5177 {
5178     BlockDriver *drv = bs->drv;
5179
5180     if (drv && drv->bdrv_media_changed) {
5181         return drv->bdrv_media_changed(bs);
5182     }
5183     return -ENOTSUP;
5184 }
5185
5186 /**
5187  * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5188  */
5189 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
5190 {
5191     BlockDriver *drv = bs->drv;
5192
5193     if (drv && drv->bdrv_eject) {
5194         drv->bdrv_eject(bs, eject_flag);
5195     }
5196
5197     if (bs->device_name[0] != '\0') {
5198         qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
5199                                           eject_flag, &error_abort);
5200     }
5201 }
5202
5203 /**
5204  * Lock or unlock the media (if it is locked, the user won't be able
5205  * to eject it manually).
5206  */
5207 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
5208 {
5209     BlockDriver *drv = bs->drv;
5210
5211     trace_bdrv_lock_medium(bs, locked);
5212
5213     if (drv && drv->bdrv_lock_medium) {
5214         drv->bdrv_lock_medium(bs, locked);
5215     }
5216 }
5217
5218 /* needed for generic scsi interface */
5219
5220 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
5221 {
5222     BlockDriver *drv = bs->drv;
5223
5224     if (drv && drv->bdrv_ioctl)
5225         return drv->bdrv_ioctl(bs, req, buf);
5226     return -ENOTSUP;
5227 }
5228
5229 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
5230         unsigned long int req, void *buf,
5231         BlockDriverCompletionFunc *cb, void *opaque)
5232 {
5233     BlockDriver *drv = bs->drv;
5234
5235     if (drv && drv->bdrv_aio_ioctl)
5236         return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
5237     return NULL;
5238 }
5239
5240 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5241 {
5242     bs->guest_block_size = align;
5243 }
5244
5245 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5246 {
5247     return qemu_memalign(bdrv_opt_mem_align(bs), size);
5248 }
5249
5250 /*
5251  * Check if all memory in this vector is sector aligned.
5252  */
5253 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5254 {
5255     int i;
5256     size_t alignment = bdrv_opt_mem_align(bs);
5257
5258     for (i = 0; i < qiov->niov; i++) {
5259         if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5260             return false;
5261         }
5262         if (qiov->iov[i].iov_len % alignment) {
5263             return false;
5264         }
5265     }
5266
5267     return true;
5268 }
5269
5270 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity,
5271                                           Error **errp)
5272 {
5273     int64_t bitmap_size;
5274     BdrvDirtyBitmap *bitmap;
5275
5276     assert((granularity & (granularity - 1)) == 0);
5277
5278     granularity >>= BDRV_SECTOR_BITS;
5279     assert(granularity);
5280     bitmap_size = bdrv_getlength(bs);
5281     if (bitmap_size < 0) {
5282         error_setg_errno(errp, -bitmap_size, "could not get length of device");
5283         errno = -bitmap_size;
5284         return NULL;
5285     }
5286     bitmap_size >>= BDRV_SECTOR_BITS;
5287     bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5288     bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5289     QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5290     return bitmap;
5291 }
5292
5293 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5294 {
5295     BdrvDirtyBitmap *bm, *next;
5296     QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5297         if (bm == bitmap) {
5298             QLIST_REMOVE(bitmap, list);
5299             hbitmap_free(bitmap->bitmap);
5300             g_free(bitmap);
5301             return;
5302         }
5303     }
5304 }
5305
5306 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5307 {
5308     BdrvDirtyBitmap *bm;
5309     BlockDirtyInfoList *list = NULL;
5310     BlockDirtyInfoList **plist = &list;
5311
5312     QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5313         BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5314         BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5315         info->count = bdrv_get_dirty_count(bs, bm);
5316         info->granularity =
5317             ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5318         entry->value = info;
5319         *plist = entry;
5320         plist = &entry->next;
5321     }
5322
5323     return list;
5324 }
5325
5326 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5327 {
5328     if (bitmap) {
5329         return hbitmap_get(bitmap->bitmap, sector);
5330     } else {
5331         return 0;
5332     }
5333 }
5334
5335 void bdrv_dirty_iter_init(BlockDriverState *bs,
5336                           BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5337 {
5338     hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5339 }
5340
5341 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5342                     int nr_sectors)
5343 {
5344     BdrvDirtyBitmap *bitmap;
5345     QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5346         hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5347     }
5348 }
5349
5350 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5351 {
5352     BdrvDirtyBitmap *bitmap;
5353     QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5354         hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5355     }
5356 }
5357
5358 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5359 {
5360     return hbitmap_count(bitmap->bitmap);
5361 }
5362
5363 /* Get a reference to bs */
5364 void bdrv_ref(BlockDriverState *bs)
5365 {
5366     bs->refcnt++;
5367 }
5368
5369 /* Release a previously grabbed reference to bs.
5370  * If after releasing, reference count is zero, the BlockDriverState is
5371  * deleted. */
5372 void bdrv_unref(BlockDriverState *bs)
5373 {
5374     assert(bs->refcnt > 0);
5375     if (--bs->refcnt == 0) {
5376         bdrv_delete(bs);
5377     }
5378 }
5379
5380 struct BdrvOpBlocker {
5381     Error *reason;
5382     QLIST_ENTRY(BdrvOpBlocker) list;
5383 };
5384
5385 bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
5386 {
5387     BdrvOpBlocker *blocker;
5388     assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5389     if (!QLIST_EMPTY(&bs->op_blockers[op])) {
5390         blocker = QLIST_FIRST(&bs->op_blockers[op]);
5391         if (errp) {
5392             error_setg(errp, "Device '%s' is busy: %s",
5393                        bs->device_name, error_get_pretty(blocker->reason));
5394         }
5395         return true;
5396     }
5397     return false;
5398 }
5399
5400 void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason)
5401 {
5402     BdrvOpBlocker *blocker;
5403     assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5404
5405     blocker = g_malloc0(sizeof(BdrvOpBlocker));
5406     blocker->reason = reason;
5407     QLIST_INSERT_HEAD(&bs->op_blockers[op], blocker, list);
5408 }
5409
5410 void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason)
5411 {
5412     BdrvOpBlocker *blocker, *next;
5413     assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5414     QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
5415         if (blocker->reason == reason) {
5416             QLIST_REMOVE(blocker, list);
5417             g_free(blocker);
5418         }
5419     }
5420 }
5421
5422 void bdrv_op_block_all(BlockDriverState *bs, Error *reason)
5423 {
5424     int i;
5425     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5426         bdrv_op_block(bs, i, reason);
5427     }
5428 }
5429
5430 void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason)
5431 {
5432     int i;
5433     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5434         bdrv_op_unblock(bs, i, reason);
5435     }
5436 }
5437
5438 bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
5439 {
5440     int i;
5441
5442     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5443         if (!QLIST_EMPTY(&bs->op_blockers[i])) {
5444             return false;
5445         }
5446     }
5447     return true;
5448 }
5449
5450 void bdrv_iostatus_enable(BlockDriverState *bs)
5451 {
5452     bs->iostatus_enabled = true;
5453     bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5454 }
5455
5456 /* The I/O status is only enabled if the drive explicitly
5457  * enables it _and_ the VM is configured to stop on errors */
5458 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5459 {
5460     return (bs->iostatus_enabled &&
5461            (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5462             bs->on_write_error == BLOCKDEV_ON_ERROR_STOP   ||
5463             bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5464 }
5465
5466 void bdrv_iostatus_disable(BlockDriverState *bs)
5467 {
5468     bs->iostatus_enabled = false;
5469 }
5470
5471 void bdrv_iostatus_reset(BlockDriverState *bs)
5472 {
5473     if (bdrv_iostatus_is_enabled(bs)) {
5474         bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5475         if (bs->job) {
5476             block_job_iostatus_reset(bs->job);
5477         }
5478     }
5479 }
5480
5481 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5482 {
5483     assert(bdrv_iostatus_is_enabled(bs));
5484     if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5485         bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5486                                          BLOCK_DEVICE_IO_STATUS_FAILED;
5487     }
5488 }
5489
5490 void
5491 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5492         enum BlockAcctType type)
5493 {
5494     assert(type < BDRV_MAX_IOTYPE);
5495
5496     cookie->bytes = bytes;
5497     cookie->start_time_ns = get_clock();
5498     cookie->type = type;
5499 }
5500
5501 void
5502 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5503 {
5504     assert(cookie->type < BDRV_MAX_IOTYPE);
5505
5506     bs->nr_bytes[cookie->type] += cookie->bytes;
5507     bs->nr_ops[cookie->type]++;
5508     bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5509 }
5510
5511 void bdrv_img_create(const char *filename, const char *fmt,
5512                      const char *base_filename, const char *base_fmt,
5513                      char *options, uint64_t img_size, int flags,
5514                      Error **errp, bool quiet)
5515 {
5516     QemuOptsList *create_opts = NULL;
5517     QemuOpts *opts = NULL;
5518     const char *backing_fmt, *backing_file;
5519     int64_t size;
5520     BlockDriver *drv, *proto_drv;
5521     BlockDriver *backing_drv = NULL;
5522     Error *local_err = NULL;
5523     int ret = 0;
5524
5525     /* Find driver and parse its options */
5526     drv = bdrv_find_format(fmt);
5527     if (!drv) {
5528         error_setg(errp, "Unknown file format '%s'", fmt);
5529         return;
5530     }
5531
5532     proto_drv = bdrv_find_protocol(filename, true);
5533     if (!proto_drv) {
5534         error_setg(errp, "Unknown protocol '%s'", filename);
5535         return;
5536     }
5537
5538     create_opts = qemu_opts_append(create_opts, drv->create_opts);
5539     create_opts = qemu_opts_append(create_opts, proto_drv->create_opts);
5540
5541     /* Create parameter list with default values */
5542     opts = qemu_opts_create(create_opts, NULL, 0, &error_abort);
5543     qemu_opt_set_number(opts, BLOCK_OPT_SIZE, img_size);
5544
5545     /* Parse -o options */
5546     if (options) {
5547         if (qemu_opts_do_parse(opts, options, NULL) != 0) {
5548             error_setg(errp, "Invalid options for file format '%s'", fmt);
5549             goto out;
5550         }
5551     }
5552
5553     if (base_filename) {
5554         if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FILE, base_filename)) {
5555             error_setg(errp, "Backing file not supported for file format '%s'",
5556                        fmt);
5557             goto out;
5558         }
5559     }
5560
5561     if (base_fmt) {
5562         if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5563             error_setg(errp, "Backing file format not supported for file "
5564                              "format '%s'", fmt);
5565             goto out;
5566         }
5567     }
5568
5569     backing_file = qemu_opt_get(opts, BLOCK_OPT_BACKING_FILE);
5570     if (backing_file) {
5571         if (!strcmp(filename, backing_file)) {
5572             error_setg(errp, "Error: Trying to create an image with the "
5573                              "same filename as the backing file");
5574             goto out;
5575         }
5576     }
5577
5578     backing_fmt = qemu_opt_get(opts, BLOCK_OPT_BACKING_FMT);
5579     if (backing_fmt) {
5580         backing_drv = bdrv_find_format(backing_fmt);
5581         if (!backing_drv) {
5582             error_setg(errp, "Unknown backing file format '%s'",
5583                        backing_fmt);
5584             goto out;
5585         }
5586     }
5587
5588     // The size for the image must always be specified, with one exception:
5589     // If we are using a backing file, we can obtain the size from there
5590     size = qemu_opt_get_size(opts, BLOCK_OPT_SIZE, 0);
5591     if (size == -1) {
5592         if (backing_file) {
5593             BlockDriverState *bs;
5594             uint64_t size;
5595             int back_flags;
5596
5597             /* backing files always opened read-only */
5598             back_flags =
5599                 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5600
5601             bs = NULL;
5602             ret = bdrv_open(&bs, backing_file, NULL, NULL, back_flags,
5603                             backing_drv, &local_err);
5604             if (ret < 0) {
5605                 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5606                                  backing_file,
5607                                  error_get_pretty(local_err));
5608                 error_free(local_err);
5609                 local_err = NULL;
5610                 goto out;
5611             }
5612             bdrv_get_geometry(bs, &size);
5613             size *= 512;
5614
5615             qemu_opt_set_number(opts, BLOCK_OPT_SIZE, size);
5616
5617             bdrv_unref(bs);
5618         } else {
5619             error_setg(errp, "Image creation needs a size parameter");
5620             goto out;
5621         }
5622     }
5623
5624     if (!quiet) {
5625         printf("Formatting '%s', fmt=%s ", filename, fmt);
5626         qemu_opts_print(opts);
5627         puts("");
5628     }
5629
5630     ret = bdrv_create(drv, filename, opts, &local_err);
5631
5632     if (ret == -EFBIG) {
5633         /* This is generally a better message than whatever the driver would
5634          * deliver (especially because of the cluster_size_hint), since that
5635          * is most probably not much different from "image too large". */
5636         const char *cluster_size_hint = "";
5637         if (qemu_opt_get_size(opts, BLOCK_OPT_CLUSTER_SIZE, 0)) {
5638             cluster_size_hint = " (try using a larger cluster size)";
5639         }
5640         error_setg(errp, "The image size is too large for file format '%s'"
5641                    "%s", fmt, cluster_size_hint);
5642         error_free(local_err);
5643         local_err = NULL;
5644     }
5645
5646 out:
5647     qemu_opts_del(opts);
5648     qemu_opts_free(create_opts);
5649     if (local_err) {
5650         error_propagate(errp, local_err);
5651     }
5652 }
5653
5654 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5655 {
5656     return bs->aio_context;
5657 }
5658
5659 void bdrv_detach_aio_context(BlockDriverState *bs)
5660 {
5661     if (!bs->drv) {
5662         return;
5663     }
5664
5665     if (bs->io_limits_enabled) {
5666         throttle_detach_aio_context(&bs->throttle_state);
5667     }
5668     if (bs->drv->bdrv_detach_aio_context) {
5669         bs->drv->bdrv_detach_aio_context(bs);
5670     }
5671     if (bs->file) {
5672         bdrv_detach_aio_context(bs->file);
5673     }
5674     if (bs->backing_hd) {
5675         bdrv_detach_aio_context(bs->backing_hd);
5676     }
5677
5678     bs->aio_context = NULL;
5679 }
5680
5681 void bdrv_attach_aio_context(BlockDriverState *bs,
5682                              AioContext *new_context)
5683 {
5684     if (!bs->drv) {
5685         return;
5686     }
5687
5688     bs->aio_context = new_context;
5689
5690     if (bs->backing_hd) {
5691         bdrv_attach_aio_context(bs->backing_hd, new_context);
5692     }
5693     if (bs->file) {
5694         bdrv_attach_aio_context(bs->file, new_context);
5695     }
5696     if (bs->drv->bdrv_attach_aio_context) {
5697         bs->drv->bdrv_attach_aio_context(bs, new_context);
5698     }
5699     if (bs->io_limits_enabled) {
5700         throttle_attach_aio_context(&bs->throttle_state, new_context);
5701     }
5702 }
5703
5704 void bdrv_set_aio_context(BlockDriverState *bs, AioContext *new_context)
5705 {
5706     bdrv_drain_all(); /* ensure there are no in-flight requests */
5707
5708     bdrv_detach_aio_context(bs);
5709
5710     /* This function executes in the old AioContext so acquire the new one in
5711      * case it runs in a different thread.
5712      */
5713     aio_context_acquire(new_context);
5714     bdrv_attach_aio_context(bs, new_context);
5715     aio_context_release(new_context);
5716 }
5717
5718 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5719                                     NotifierWithReturn *notifier)
5720 {
5721     notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5722 }
5723
5724 int bdrv_amend_options(BlockDriverState *bs, QemuOpts *opts)
5725 {
5726     if (!bs->drv->bdrv_amend_options) {
5727         return -ENOTSUP;
5728     }
5729     return bs->drv->bdrv_amend_options(bs, opts);
5730 }
5731
5732 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5733  * of block filter and by bdrv_is_first_non_filter.
5734  * It is used to test if the given bs is the candidate or recurse more in the
5735  * node graph.
5736  */
5737 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5738                                       BlockDriverState *candidate)
5739 {
5740     /* return false if basic checks fails */
5741     if (!bs || !bs->drv) {
5742         return false;
5743     }
5744
5745     /* the code reached a non block filter driver -> check if the bs is
5746      * the same as the candidate. It's the recursion termination condition.
5747      */
5748     if (!bs->drv->is_filter) {
5749         return bs == candidate;
5750     }
5751     /* Down this path the driver is a block filter driver */
5752
5753     /* If the block filter recursion method is defined use it to recurse down
5754      * the node graph.
5755      */
5756     if (bs->drv->bdrv_recurse_is_first_non_filter) {
5757         return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5758     }
5759
5760     /* the driver is a block filter but don't allow to recurse -> return false
5761      */
5762     return false;
5763 }
5764
5765 /* This function checks if the candidate is the first non filter bs down it's
5766  * bs chain. Since we don't have pointers to parents it explore all bs chains
5767  * from the top. Some filters can choose not to pass down the recursion.
5768  */
5769 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5770 {
5771     BlockDriverState *bs;
5772
5773     /* walk down the bs forest recursively */
5774     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5775         bool perm;
5776
5777         /* try to recurse in this top level bs */
5778         perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5779
5780         /* candidate is the first non filter */
5781         if (perm) {
5782             return true;
5783         }
5784     }
5785
5786     return false;
5787 }
5788
5789 BlockDriverState *check_to_replace_node(const char *node_name, Error **errp)
5790 {
5791     BlockDriverState *to_replace_bs = bdrv_find_node(node_name);
5792     if (!to_replace_bs) {
5793         error_setg(errp, "Node name '%s' not found", node_name);
5794         return NULL;
5795     }
5796
5797     if (bdrv_op_is_blocked(to_replace_bs, BLOCK_OP_TYPE_REPLACE, errp)) {
5798         return NULL;
5799     }
5800
5801     /* We don't want arbitrary node of the BDS chain to be replaced only the top
5802      * most non filter in order to prevent data corruption.
5803      * Another benefit is that this tests exclude backing files which are
5804      * blocked by the backing blockers.
5805      */
5806     if (!bdrv_is_first_non_filter(to_replace_bs)) {
5807         error_setg(errp, "Only top most non filter can be replaced");
5808         return NULL;
5809     }
5810
5811     return to_replace_bs;
5812 }
5813
5814 void bdrv_io_plug(BlockDriverState *bs)
5815 {
5816     BlockDriver *drv = bs->drv;
5817     if (drv && drv->bdrv_io_plug) {
5818         drv->bdrv_io_plug(bs);
5819     } else if (bs->file) {
5820         bdrv_io_plug(bs->file);
5821     }
5822 }
5823
5824 void bdrv_io_unplug(BlockDriverState *bs)
5825 {
5826     BlockDriver *drv = bs->drv;
5827     if (drv && drv->bdrv_io_unplug) {
5828         drv->bdrv_io_unplug(bs);
5829     } else if (bs->file) {
5830         bdrv_io_unplug(bs->file);
5831     }
5832 }
5833
5834 void bdrv_flush_io_queue(BlockDriverState *bs)
5835 {
5836     BlockDriver *drv = bs->drv;
5837     if (drv && drv->bdrv_flush_io_queue) {
5838         drv->bdrv_flush_io_queue(bs);
5839     } else if (bs->file) {
5840         bdrv_flush_io_queue(bs->file);
5841     }
5842 }