S: Maintained
F: drivers/input/
+INPUT MULTITOUCH (MT) PROTOCOL
+M: Henrik Rydberg <rydberg@euromail.se>
+L: linux-input@vger.kernel.org
+S: Maintained
+F: Documentation/input/multi-touch-protocol.txt
+K: \b(ABS|SYN)_MT_
+
INTEL IDLE DRIVER
M: Len Brown <lenb@kernel.org>
L: linux-pm@lists.linux-foundation.org
#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
static int board_keymap[] = {
+ /*
+ * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
+ * connected to the ground" matrix state.
+ */
KEY(0, 0, KEY_Q),
KEY(0, 1, KEY_O),
KEY(0, 2, KEY_P),
KEY(0, 4, KEY_BACKSPACE),
KEY(0, 6, KEY_A),
KEY(0, 7, KEY_S),
+
KEY(1, 0, KEY_W),
KEY(1, 1, KEY_D),
KEY(1, 2, KEY_F),
KEY(1, 5, KEY_J),
KEY(1, 6, KEY_K),
KEY(1, 7, KEY_L),
+
KEY(2, 0, KEY_E),
KEY(2, 1, KEY_DOT),
KEY(2, 2, KEY_UP),
KEY(2, 5, KEY_Z),
KEY(2, 6, KEY_X),
KEY(2, 7, KEY_C),
+ KEY(2, 8, KEY_F9),
+
KEY(3, 0, KEY_R),
KEY(3, 1, KEY_V),
KEY(3, 2, KEY_B),
KEY(3, 5, KEY_SPACE),
KEY(3, 6, KEY_SPACE),
KEY(3, 7, KEY_LEFT),
+
KEY(4, 0, KEY_T),
KEY(4, 1, KEY_DOWN),
KEY(4, 2, KEY_RIGHT),
KEY(4, 4, KEY_LEFTCTRL),
KEY(4, 5, KEY_RIGHTALT),
KEY(4, 6, KEY_LEFTSHIFT),
+ KEY(4, 8, KEY_10),
+
KEY(5, 0, KEY_Y),
+ KEY(5, 8, KEY_11),
+
KEY(6, 0, KEY_U),
+
KEY(7, 0, KEY_I),
KEY(7, 1, KEY_F7),
KEY(7, 2, KEY_F8),
- KEY(0xff, 2, KEY_F9),
- KEY(0xff, 4, KEY_F10),
- KEY(0xff, 5, KEY_F11),
};
static struct matrix_keymap_data board_map_data = {
case KEY_RIGHTALT:
if (value)
sysrq_alt = code;
- else if (sysrq_down && code == sysrq_alt_use)
- sysrq_down = false;
+ else {
+ if (sysrq_down && code == sysrq_alt_use)
+ sysrq_down = false;
+
+ sysrq_alt = 0;
+ }
break;
case KEY_SYSRQ:
struct gc {
struct pardevice *pd;
struct gc_pad pads[GC_MAX_DEVICES];
- struct input_dev *dev[GC_MAX_DEVICES];
struct timer_list timer;
int pad_count[GC_MAX];
int used;
for (i = 0; i < GC_MAX_DEVICES; i++) {
pad = &gc->pads[i];
- dev = gc->dev[i];
+ dev = pad->dev;
s = gc_status_bit[i];
switch (pad->type) {
read = parport_read_status(port) ^ 0x80;
for (j = 0; j < GC_MAX_DEVICES; j++) {
- struct gc_pad *pad = &gc->pads[i];
+ struct gc_pad *pad = &gc->pads[j];
if (pad->type == GC_PSX || pad->type == GC_DDR)
data[j] |= (read & gc_status_bit[j]) ? (1 << i) : 0;
{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};
module will be called atakbd.
config KEYBOARD_ATKBD
- tristate "AT keyboard" if EMBEDDED || !X86
+ tristate "AT keyboard" if EMBEDDED || !X86 || X86_MRST
default y
select SERIO
select SERIO_LIBPS2
right-hand column will be interpreted as the key shown in the
left-hand column.
-config QT2160
+config KEYBOARD_QT2160
tristate "Atmel AT42QT2160 Touch Sensor Chip"
depends on I2C && EXPERIMENTAL
help
*/
#define TWL4030_MAX_ROWS 8 /* TWL4030 hard limit */
#define TWL4030_MAX_COLS 8
-#define TWL4030_ROW_SHIFT 3
-#define TWL4030_KEYMAP_SIZE (TWL4030_MAX_ROWS * TWL4030_MAX_COLS)
+/*
+ * Note that we add space for an extra column so that we can handle
+ * row lines connected to the gnd (see twl4030_col_xlate()).
+ */
+#define TWL4030_ROW_SHIFT 4
+#define TWL4030_KEYMAP_SIZE (TWL4030_MAX_ROWS << TWL4030_ROW_SHIFT)
struct twl4030_keypad {
unsigned short keymap[TWL4030_KEYMAP_SIZE];
return ret;
}
-static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
+static bool twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
{
int i;
u16 check = 0;
u16 col = key_state[i];
if ((col & check) && hweight16(col) > 1)
- return 1;
+ return true;
check |= col;
}
- return 0;
+ return false;
}
static void twl4030_kp_scan(struct twl4030_keypad *kp, bool release_all)
if (!changed)
continue;
- for (col = 0; col < kp->n_cols; col++) {
+ /* Extra column handles "all gnd" rows */
+ for (col = 0; col < kp->n_cols + 1; col++) {
int code;
if (!(changed & (1 << col)))
.probe = w90p910_keypad_probe,
.remove = __devexit_p(w90p910_keypad_remove),
.driver = {
- .name = "nuc900-keypad",
+ .name = "nuc900-kpi",
.owner = THIS_MODULE,
},
};
unsigned char nextstate = read_state(lp);
if (lp->laststate != nextstate) {
- int key_down = nextstate <= ARRAY_SIZE(lp->btncode);
+ int key_down = nextstate < ARRAY_SIZE(lp->btncode);
unsigned short keycode = key_down ?
lp->btncode[nextstate] : lp->btncode[lp->laststate];
priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2];
priv->ext_cap = priv->ext_cap_0c = 0;
- if (!SYN_CAP_VALID(priv->capabilities))
+ /*
+ * Older firmwares had submodel ID fixed to 0x47
+ */
+ if (SYN_ID_FULL(priv->identity) < 0x705 &&
+ SYN_CAP_SUBMODEL_ID(priv->capabilities) != 0x47) {
return -1;
+ }
/*
* Unless capExtended is set the rest of the flags should be ignored
unsigned char max[3];
if (SYN_ID_MAJOR(priv->identity) < 4)
+ return 0;
if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res) == 0) {
if (res[0] != 0 && (res[1] & 0x80) && res[2] != 0) {
#define SYN_CAP_FOUR_BUTTON(c) ((c) & (1 << 3))
#define SYN_CAP_MULTIFINGER(c) ((c) & (1 << 1))
#define SYN_CAP_PALMDETECT(c) ((c) & (1 << 0))
-#define SYN_CAP_VALID(c) ((((c) & 0x00ff00) >> 8) == 0x47)
+#define SYN_CAP_SUBMODEL_ID(c) (((c) & 0x00ff00) >> 8)
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
#define SYN_ID_MODEL(i) (((i) >> 4) & 0x0f)
#define SYN_ID_MAJOR(i) ((i) & 0x0f)
#define SYN_ID_MINOR(i) (((i) >> 16) & 0xff)
+#define SYN_ID_FULL(i) ((SYN_ID_MAJOR(i) << 8) | SYN_ID_MINOR(i))
#define SYN_ID_IS_SYNAPTICS(i) ((((i) >> 8) & 0xff) == 0x47)
/* synaptics special commands */
tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
default y
depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
- (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN
+ (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN && !X86_MRST
help
i8042 is the chip over which the standard AT keyboard and PS/2
mouse are connected to the computer. If you use these devices,
DMI_MATCH(DMI_BOARD_VERSION, "1.02"),
},
},
+ {
+ /* Gigabyte Spring Peak - defines wrong chassis type */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Spring Peak"),
+ },
+ },
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
(data[4] << 20) + (data[5] << 12) +
(data[6] << 4) + (data[7] >> 4);
- wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
+ wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) |
+ ((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12);
- switch (wacom->id[idx]) {
+ switch (wacom->id[idx] & 0xfffff) {
case 0x812: /* Inking pen */
case 0x801: /* Intuos3 Inking pen */
- case 0x20802: /* Intuos4 Classic Pen */
+ case 0x20802: /* Intuos4 Inking Pen */
case 0x012:
wacom->tool[idx] = BTN_TOOL_PENCIL;
break;
input_report_abs(input, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
input_report_abs(input, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
- if ((data[5] & 0x1f) | (data[6] & 0x1f) | (data[1] & 0x1f) |
+ if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) |
data[2] | (data[3] & 0x1f) | data[4] | data[8] |
(data[7] & 0x01)) {
input_report_key(input, wacom->tool[1], 1);
return -EINVAL;
}
+ spi->bits_per_word = 16;
+ err = spi_setup(spi);
+ if (err) {
+ dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n");
+ return err;
+ }
+
ts = kzalloc(sizeof(struct ad7877), GFP_KERNEL);
input_dev = input_allocate_device();
if (!ts || !input_dev) {
w90p910_ts->state = TS_IDLE;
spin_lock_init(&w90p910_ts->lock);
setup_timer(&w90p910_ts->timer, w90p910_check_pen_up,
- (unsigned long)&w90p910_ts);
+ (unsigned long)w90p910_ts);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
#else
-void i8042_lock_chip(void)
+static inline void i8042_lock_chip(void)
{
}
-void i8042_unlock_chip(void)
+static inline void i8042_unlock_chip(void)
{
}
-int i8042_command(unsigned char *param, int command)
+static inline int i8042_command(unsigned char *param, int command)
{
return -ENODEV;
}
-bool i8042_check_port_owner(const struct serio *serio)
+static inline bool i8042_check_port_owner(const struct serio *serio)
{
return false;
}
-int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
+static inline int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
struct serio *serio))
{
return -ENODEV;
}
-int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
+static inline int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
struct serio *serio))
{
return -ENODEV;
projects / lisovros / linux_canprio.git / commitdiff