current limit is controllable).
(C) 2008 Wolfson Microelectronics PLC.
-Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Author: Liam Girdwood <lrg@slimlogic.co.uk>
Nomenclature
--- /dev/null
+
+Concurrency Managed Workqueue (cmwq)
+
+September, 2010 Tejun Heo <tj@kernel.org>
+ Florian Mickler <florian@mickler.org>
+
+CONTENTS
+
+1. Introduction
+2. Why cmwq?
+3. The Design
+4. Application Programming Interface (API)
+5. Example Execution Scenarios
+6. Guidelines
+
+
+1. Introduction
+
+There are many cases where an asynchronous process execution context
+is needed and the workqueue (wq) API is the most commonly used
+mechanism for such cases.
+
+When such an asynchronous execution context is needed, a work item
+describing which function to execute is put on a queue. An
+independent thread serves as the asynchronous execution context. The
+queue is called workqueue and the thread is called worker.
+
+While there are work items on the workqueue the worker executes the
+functions associated with the work items one after the other. When
+there is no work item left on the workqueue the worker becomes idle.
+When a new work item gets queued, the worker begins executing again.
+
+
+2. Why cmwq?
+
+In the original wq implementation, a multi threaded (MT) wq had one
+worker thread per CPU and a single threaded (ST) wq had one worker
+thread system-wide. A single MT wq needed to keep around the same
+number of workers as the number of CPUs. The kernel grew a lot of MT
+wq users over the years and with the number of CPU cores continuously
+rising, some systems saturated the default 32k PID space just booting
+up.
+
+Although MT wq wasted a lot of resource, the level of concurrency
+provided was unsatisfactory. The limitation was common to both ST and
+MT wq albeit less severe on MT. Each wq maintained its own separate
+worker pool. A MT wq could provide only one execution context per CPU
+while a ST wq one for the whole system. Work items had to compete for
+those very limited execution contexts leading to various problems
+including proneness to deadlocks around the single execution context.
+
+The tension between the provided level of concurrency and resource
+usage also forced its users to make unnecessary tradeoffs like libata
+choosing to use ST wq for polling PIOs and accepting an unnecessary
+limitation that no two polling PIOs can progress at the same time. As
+MT wq don't provide much better concurrency, users which require
+higher level of concurrency, like async or fscache, had to implement
+their own thread pool.
+
+Concurrency Managed Workqueue (cmwq) is a reimplementation of wq with
+focus on the following goals.
+
+* Maintain compatibility with the original workqueue API.
+
+* Use per-CPU unified worker pools shared by all wq to provide
+ flexible level of concurrency on demand without wasting a lot of
+ resource.
+
+* Automatically regulate worker pool and level of concurrency so that
+ the API users don't need to worry about such details.
+
+
+3. The Design
+
+In order to ease the asynchronous execution of functions a new
+abstraction, the work item, is introduced.
+
+A work item is a simple struct that holds a pointer to the function
+that is to be executed asynchronously. Whenever a driver or subsystem
+wants a function to be executed asynchronously it has to set up a work
+item pointing to that function and queue that work item on a
+workqueue.
+
+Special purpose threads, called worker threads, execute the functions
+off of the queue, one after the other. If no work is queued, the
+worker threads become idle. These worker threads are managed in so
+called thread-pools.
+
+The cmwq design differentiates between the user-facing workqueues that
+subsystems and drivers queue work items on and the backend mechanism
+which manages thread-pool and processes the queued work items.
+
+The backend is called gcwq. There is one gcwq for each possible CPU
+and one gcwq to serve work items queued on unbound workqueues.
+
+Subsystems and drivers can create and queue work items through special
+workqueue API functions as they see fit. They can influence some
+aspects of the way the work items are executed by setting flags on the
+workqueue they are putting the work item on. These flags include
+things like CPU locality, reentrancy, concurrency limits and more. To
+get a detailed overview refer to the API description of
+alloc_workqueue() below.
+
+When a work item is queued to a workqueue, the target gcwq is
+determined according to the queue parameters and workqueue attributes
+and appended on the shared worklist of the gcwq. For example, unless
+specifically overridden, a work item of a bound workqueue will be
+queued on the worklist of exactly that gcwq that is associated to the
+CPU the issuer is running on.
+
+For any worker pool implementation, managing the concurrency level
+(how many execution contexts are active) is an important issue. cmwq
+tries to keep the concurrency at a minimal but sufficient level.
+Minimal to save resources and sufficient in that the system is used at
+its full capacity.
+
+Each gcwq bound to an actual CPU implements concurrency management by
+hooking into the scheduler. The gcwq is notified whenever an active
+worker wakes up or sleeps and keeps track of the number of the
+currently runnable workers. Generally, work items are not expected to
+hog a CPU and consume many cycles. That means maintaining just enough
+concurrency to prevent work processing from stalling should be
+optimal. As long as there are one or more runnable workers on the
+CPU, the gcwq doesn't start execution of a new work, but, when the
+last running worker goes to sleep, it immediately schedules a new
+worker so that the CPU doesn't sit idle while there are pending work
+items. This allows using a minimal number of workers without losing
+execution bandwidth.
+
+Keeping idle workers around doesn't cost other than the memory space
+for kthreads, so cmwq holds onto idle ones for a while before killing
+them.
+
+For an unbound wq, the above concurrency management doesn't apply and
+the gcwq for the pseudo unbound CPU tries to start executing all work
+items as soon as possible. The responsibility of regulating
+concurrency level is on the users. There is also a flag to mark a
+bound wq to ignore the concurrency management. Please refer to the
+API section for details.
+
+Forward progress guarantee relies on that workers can be created when
+more execution contexts are necessary, which in turn is guaranteed
+through the use of rescue workers. All work items which might be used
+on code paths that handle memory reclaim are required to be queued on
+wq's that have a rescue-worker reserved for execution under memory
+pressure. Else it is possible that the thread-pool deadlocks waiting
+for execution contexts to free up.
+
+
+4. Application Programming Interface (API)
+
+alloc_workqueue() allocates a wq. The original create_*workqueue()
+functions are deprecated and scheduled for removal. alloc_workqueue()
+takes three arguments - @name, @flags and @max_active. @name is the
+name of the wq and also used as the name of the rescuer thread if
+there is one.
+
+A wq no longer manages execution resources but serves as a domain for
+forward progress guarantee, flush and work item attributes. @flags
+and @max_active control how work items are assigned execution
+resources, scheduled and executed.
+
+@flags:
+
+ WQ_NON_REENTRANT
+
+ By default, a wq guarantees non-reentrance only on the same
+ CPU. A work item may not be executed concurrently on the same
+ CPU by multiple workers but is allowed to be executed
+ concurrently on multiple CPUs. This flag makes sure
+ non-reentrance is enforced across all CPUs. Work items queued
+ to a non-reentrant wq are guaranteed to be executed by at most
+ one worker system-wide at any given time.
+
+ WQ_UNBOUND
+
+ Work items queued to an unbound wq are served by a special
+ gcwq which hosts workers which are not bound to any specific
+ CPU. This makes the wq behave as a simple execution context
+ provider without concurrency management. The unbound gcwq
+ tries to start execution of work items as soon as possible.
+ Unbound wq sacrifices locality but is useful for the following
+ cases.
+
+ * Wide fluctuation in the concurrency level requirement is
+ expected and using bound wq may end up creating large number
+ of mostly unused workers across different CPUs as the issuer
+ hops through different CPUs.
+
+ * Long running CPU intensive workloads which can be better
+ managed by the system scheduler.
+
+ WQ_FREEZEABLE
+
+ A freezeable wq participates in the freeze phase of the system
+ suspend operations. Work items on the wq are drained and no
+ new work item starts execution until thawed.
+
+ WQ_RESCUER
+
+ All wq which might be used in the memory reclaim paths _MUST_
+ have this flag set. This reserves one worker exclusively for
+ the execution of this wq under memory pressure.
+
+ WQ_HIGHPRI
+
+ Work items of a highpri wq are queued at the head of the
+ worklist of the target gcwq and start execution regardless of
+ the current concurrency level. In other words, highpri work
+ items will always start execution as soon as execution
+ resource is available.
+
+ Ordering among highpri work items is preserved - a highpri
+ work item queued after another highpri work item will start
+ execution after the earlier highpri work item starts.
+
+ Although highpri work items are not held back by other
+ runnable work items, they still contribute to the concurrency
+ level. Highpri work items in runnable state will prevent
+ non-highpri work items from starting execution.
+
+ This flag is meaningless for unbound wq.
+
+ WQ_CPU_INTENSIVE
+
+ Work items of a CPU intensive wq do not contribute to the
+ concurrency level. In other words, runnable CPU intensive
+ work items will not prevent other work items from starting
+ execution. This is useful for bound work items which are
+ expected to hog CPU cycles so that their execution is
+ regulated by the system scheduler.
+
+ Although CPU intensive work items don't contribute to the
+ concurrency level, start of their executions is still
+ regulated by the concurrency management and runnable
+ non-CPU-intensive work items can delay execution of CPU
+ intensive work items.
+
+ This flag is meaningless for unbound wq.
+
+ WQ_HIGHPRI | WQ_CPU_INTENSIVE
+
+ This combination makes the wq avoid interaction with
+ concurrency management completely and behave as a simple
+ per-CPU execution context provider. Work items queued on a
+ highpri CPU-intensive wq start execution as soon as resources
+ are available and don't affect execution of other work items.
+
+@max_active:
+
+@max_active determines the maximum number of execution contexts per
+CPU which can be assigned to the work items of a wq. For example,
+with @max_active of 16, at most 16 work items of the wq can be
+executing at the same time per CPU.
+
+Currently, for a bound wq, the maximum limit for @max_active is 512
+and the default value used when 0 is specified is 256. For an unbound
+wq, the limit is higher of 512 and 4 * num_possible_cpus(). These
+values are chosen sufficiently high such that they are not the
+limiting factor while providing protection in runaway cases.
+
+The number of active work items of a wq is usually regulated by the
+users of the wq, more specifically, by how many work items the users
+may queue at the same time. Unless there is a specific need for
+throttling the number of active work items, specifying '0' is
+recommended.
+
+Some users depend on the strict execution ordering of ST wq. The
+combination of @max_active of 1 and WQ_UNBOUND is used to achieve this
+behavior. Work items on such wq are always queued to the unbound gcwq
+and only one work item can be active at any given time thus achieving
+the same ordering property as ST wq.
+
+
+5. Example Execution Scenarios
+
+The following example execution scenarios try to illustrate how cmwq
+behave under different configurations.
+
+ Work items w0, w1, w2 are queued to a bound wq q0 on the same CPU.
+ w0 burns CPU for 5ms then sleeps for 10ms then burns CPU for 5ms
+ again before finishing. w1 and w2 burn CPU for 5ms then sleep for
+ 10ms.
+
+Ignoring all other tasks, works and processing overhead, and assuming
+simple FIFO scheduling, the following is one highly simplified version
+of possible sequences of events with the original wq.
+
+ TIME IN MSECS EVENT
+ 0 w0 starts and burns CPU
+ 5 w0 sleeps
+ 15 w0 wakes up and burns CPU
+ 20 w0 finishes
+ 20 w1 starts and burns CPU
+ 25 w1 sleeps
+ 35 w1 wakes up and finishes
+ 35 w2 starts and burns CPU
+ 40 w2 sleeps
+ 50 w2 wakes up and finishes
+
+And with cmwq with @max_active >= 3,
+
+ TIME IN MSECS EVENT
+ 0 w0 starts and burns CPU
+ 5 w0 sleeps
+ 5 w1 starts and burns CPU
+ 10 w1 sleeps
+ 10 w2 starts and burns CPU
+ 15 w2 sleeps
+ 15 w0 wakes up and burns CPU
+ 20 w0 finishes
+ 20 w1 wakes up and finishes
+ 25 w2 wakes up and finishes
+
+If @max_active == 2,
+
+ TIME IN MSECS EVENT
+ 0 w0 starts and burns CPU
+ 5 w0 sleeps
+ 5 w1 starts and burns CPU
+ 10 w1 sleeps
+ 15 w0 wakes up and burns CPU
+ 20 w0 finishes
+ 20 w1 wakes up and finishes
+ 20 w2 starts and burns CPU
+ 25 w2 sleeps
+ 35 w2 wakes up and finishes
+
+Now, let's assume w1 and w2 are queued to a different wq q1 which has
+WQ_HIGHPRI set,
+
+ TIME IN MSECS EVENT
+ 0 w1 and w2 start and burn CPU
+ 5 w1 sleeps
+ 10 w2 sleeps
+ 10 w0 starts and burns CPU
+ 15 w0 sleeps
+ 15 w1 wakes up and finishes
+ 20 w2 wakes up and finishes
+ 25 w0 wakes up and burns CPU
+ 30 w0 finishes
+
+If q1 has WQ_CPU_INTENSIVE set,
+
+ TIME IN MSECS EVENT
+ 0 w0 starts and burns CPU
+ 5 w0 sleeps
+ 5 w1 and w2 start and burn CPU
+ 10 w1 sleeps
+ 15 w2 sleeps
+ 15 w0 wakes up and burns CPU
+ 20 w0 finishes
+ 20 w1 wakes up and finishes
+ 25 w2 wakes up and finishes
+
+
+6. Guidelines
+
+* Do not forget to use WQ_RESCUER if a wq may process work items which
+ are used during memory reclaim. Each wq with WQ_RESCUER set has one
+ rescuer thread reserved for it. If there is dependency among
+ multiple work items used during memory reclaim, they should be
+ queued to separate wq each with WQ_RESCUER.
+
+* Unless strict ordering is required, there is no need to use ST wq.
+
+* Unless there is a specific need, using 0 for @max_active is
+ recommended. In most use cases, concurrency level usually stays
+ well under the default limit.
+
+* A wq serves as a domain for forward progress guarantee (WQ_RESCUER),
+ flush and work item attributes. Work items which are not involved
+ in memory reclaim and don't need to be flushed as a part of a group
+ of work items, and don't require any special attribute, can use one
+ of the system wq. There is no difference in execution
+ characteristics between using a dedicated wq and a system wq.
+
+* Unless work items are expected to consume a huge amount of CPU
+ cycles, using a bound wq is usually beneficial due to the increased
+ level of locality in wq operations and work item execution.
sys_sigreturn_wrapper:
add r0, sp, #S_OFF
+ mov why, #0 @ prevent syscall restart handling
b sys_sigreturn
ENDPROC(sys_sigreturn_wrapper)
sys_rt_sigreturn_wrapper:
add r0, sp, #S_OFF
+ mov why, #0 @ prevent syscall restart handling
b sys_rt_sigreturn
ENDPROC(sys_rt_sigreturn_wrapper)
;;
RSM_PSR_I(p0, r18, r19) // mask interrupt delivery
- mov ar.ccv=0
andcm r14=r14,r17 // filter out SIGKILL & SIGSTOP
+ mov r8=EINVAL // default to EINVAL
#ifdef CONFIG_SMP
// __ticket_spin_trylock(r31)
ld4 r17=[r31]
- mov r8=EINVAL // default to EINVAL
- ;;
- extr r9=r17,17,15
;;
- xor r18=r17,r9
+ mov.m ar.ccv=r17
+ extr.u r9=r17,17,15
adds r19=1,r17
+ extr.u r18=r17,0,15
;;
- extr.u r18=r18,0,15
+ cmp.eq p6,p7=r9,r18
;;
- cmp.eq p0,p7=0,r18
+(p6) cmpxchg4.acq r9=[r31],r19,ar.ccv
+(p6) dep.z r20=r19,1,15 // next serving ticket for unlock
(p7) br.cond.spnt.many .lock_contention
- mov.m ar.ccv=r17
- ;;
- cmpxchg4.acq r9=[r31],r19,ar.ccv
;;
cmp4.eq p0,p7=r9,r17
+ adds r31=2,r31
(p7) br.cond.spnt.many .lock_contention
ld8 r3=[r2] // re-read current->blocked now that we hold the lock
;;
#else
ld8 r3=[r2] // re-read current->blocked now that we hold the lock
- mov r8=EINVAL // default to EINVAL
#endif
add r18=IA64_TASK_PENDING_OFFSET+IA64_SIGPENDING_SIGNAL_OFFSET,r16
add r19=IA64_TASK_SIGNAL_OFFSET,r16
#ifdef CONFIG_SMP
// __ticket_spin_unlock(r31)
- adds r31=2,r31
- ;;
- ld2.bias r2=[r31]
- mov r3=65534
- ;;
- adds r2=2,r2
- ;;
- and r3=r3,r2
- ;;
- st2.rel [r31]=r3
+ st2.rel [r31]=r20
+ mov r20=0 // i must not leak kernel bits...
#endif
SSM_PSR_I(p0, p9, r31)
;;
.sig_pending:
#ifdef CONFIG_SMP
// __ticket_spin_unlock(r31)
- adds r31=2,r31
- ;;
- ld2.bias r2=[r31]
- mov r3=65534
- ;;
- adds r2=2,r2
- ;;
- and r3=r3,r2
- ;;
- st2.rel [r31]=r3
+ st2.rel [r31]=r20 // release the lock
#endif
SSM_PSR_I(p0, p9, r17)
;;
/** Is the PROC_STATUS SPR supported? */
#define CHIP_HAS_PROC_STATUS_SPR() 0
+/** Is the DSTREAM_PF SPR supported? */
+#define CHIP_HAS_DSTREAM_PF() 0
+
/** Log of the number of mshims we have. */
#define CHIP_LOG_NUM_MSHIMS() 2
/** Is the PROC_STATUS SPR supported? */
#define CHIP_HAS_PROC_STATUS_SPR() 1
+/** Is the DSTREAM_PF SPR supported? */
+#define CHIP_HAS_DSTREAM_PF() 0
+
/** Log of the number of mshims we have. */
#define CHIP_LOG_NUM_MSHIMS() 2
struct compat_sigaction;
struct compat_siginfo;
struct compat_sigaltstack;
-long compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
- compat_uptr_t __user *envp);
+long compat_sys_execve(const char __user *path,
+ const compat_uptr_t __user *argv,
+ const compat_uptr_t __user *envp);
long compat_sys_rt_sigaction(int sig, struct compat_sigaction __user *act,
struct compat_sigaction __user *oact,
size_t sigsetsize);
#define iowrite32 writel
#define iowrite64 writeq
-static inline void *memcpy_fromio(void *dst, void *src, int len)
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src,
+ size_t len)
{
int x;
BUG_ON((unsigned long)src & 0x3);
for (x = 0; x < len; x += 4)
*(u32 *)(dst + x) = readl(src + x);
- return dst;
}
-static inline void *memcpy_toio(void *dst, void *src, int len)
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
+ size_t len)
{
int x;
BUG_ON((unsigned long)dst & 0x3);
for (x = 0; x < len; x += 4)
writel(*(u32 *)(src + x), dst + x);
- return dst;
}
/*
/* Any other miscellaneous processor state bits */
unsigned long proc_status;
#endif
+#if !CHIP_HAS_FIXED_INTVEC_BASE()
+ /* Interrupt base for PL0 interrupts */
+ unsigned long interrupt_vector_base;
+#endif
+#if CHIP_HAS_TILE_RTF_HWM()
+ /* Tile cache retry fifo high-water mark */
+ unsigned long tile_rtf_hwm;
+#endif
+#if CHIP_HAS_DSTREAM_PF()
+ /* Data stream prefetch control */
+ unsigned long dstream_pf;
+#endif
#ifdef CONFIG_HARDWALL
/* Is this task tied to an activated hardwall? */
struct hardwall_info *hardwall;
/*
* This struct defines the way the registers are stored on the stack during a
- * system call/exception. It should be a multiple of 8 bytes to preserve
- * normal stack alignment rules.
- *
- * Must track <sys/ucontext.h> and <sys/procfs.h>
+ * system call or exception. "struct sigcontext" has the same shape.
*/
struct pt_regs {
/* Saved main processor registers; 56..63 are special. */
#endif /* __ASSEMBLY__ */
-/* Flag bits in pt_regs.flags */
-#define PT_FLAGS_DISABLE_IRQ 1 /* on return to kernel, disable irqs */
-#define PT_FLAGS_CALLER_SAVES 2 /* caller-save registers are valid */
-#define PT_FLAGS_RESTORE_REGS 4 /* restore callee-save regs on return */
-
#define PTRACE_GETREGS 12
#define PTRACE_SETREGS 13
#define PTRACE_GETFPREGS 14
#ifdef __KERNEL__
+/* Flag bits in pt_regs.flags */
+#define PT_FLAGS_DISABLE_IRQ 1 /* on return to kernel, disable irqs */
+#define PT_FLAGS_CALLER_SAVES 2 /* caller-save registers are valid */
+#define PT_FLAGS_RESTORE_REGS 4 /* restore callee-save regs on return */
+
#ifndef __ASSEMBLY__
#define instruction_pointer(regs) ((regs)->pc)
#ifndef _ASM_TILE_SIGCONTEXT_H
#define _ASM_TILE_SIGCONTEXT_H
-/* NOTE: we can't include <linux/ptrace.h> due to #include dependencies. */
-#include <asm/ptrace.h>
-
-/* Must track <sys/ucontext.h> */
+#include <arch/abi.h>
+/*
+ * struct sigcontext has the same shape as struct pt_regs,
+ * but is simplified since we know the fault is from userspace.
+ */
struct sigcontext {
- struct pt_regs regs;
+ uint_reg_t gregs[53]; /* General-purpose registers. */
+ uint_reg_t tp; /* Aliases gregs[TREG_TP]. */
+ uint_reg_t sp; /* Aliases gregs[TREG_SP]. */
+ uint_reg_t lr; /* Aliases gregs[TREG_LR]. */
+ uint_reg_t pc; /* Program counter. */
+ uint_reg_t ics; /* In Interrupt Critical Section? */
+ uint_reg_t faultnum; /* Fault number. */
+ uint_reg_t pad[5];
};
#endif /* _ASM_TILE_SIGCONTEXT_H */
#include <asm-generic/signal.h>
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+struct pt_regs;
int restore_sigcontext(struct pt_regs *, struct sigcontext __user *, long *);
int setup_sigcontext(struct sigcontext __user *, struct pt_regs *);
void do_signal(struct pt_regs *regs);
long _sys_fork(struct pt_regs *regs);
long sys_vfork(void);
long _sys_vfork(struct pt_regs *regs);
-long sys_execve(char __user *filename, char __user * __user *argv,
- char __user * __user *envp);
-long _sys_execve(char __user *filename, char __user * __user *argv,
- char __user * __user *envp, struct pt_regs *regs);
+long sys_execve(const char __user *filename,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp);
+long _sys_execve(const char __user *filename,
+ const char __user *const __user *argv,
+ const char __user *const __user *envp, struct pt_regs *regs);
/* kernel/signal.c */
long sys_sigaltstack(const stack_t __user *, stack_t __user *);
#endif
#ifdef CONFIG_COMPAT
-long compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
- compat_uptr_t __user *envp);
-long _compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
- compat_uptr_t __user *envp, struct pt_regs *regs);
+long compat_sys_execve(const char __user *path,
+ const compat_uptr_t __user *argv,
+ const compat_uptr_t __user *envp);
+long _compat_sys_execve(const char __user *path,
+ const compat_uptr_t __user *argv,
+ const compat_uptr_t __user *envp,
+ struct pt_regs *regs);
long compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
struct compat_sigaltstack __user *uoss_ptr);
long _compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
#if CHIP_HAS_PROC_STATUS_SPR()
t->proc_status = __insn_mfspr(SPR_PROC_STATUS);
#endif
+#if !CHIP_HAS_FIXED_INTVEC_BASE()
+ t->interrupt_vector_base = __insn_mfspr(SPR_INTERRUPT_VECTOR_BASE_0);
+#endif
+#if CHIP_HAS_TILE_RTF_HWM()
+ t->tile_rtf_hwm = __insn_mfspr(SPR_TILE_RTF_HWM);
+#endif
+#if CHIP_HAS_DSTREAM_PF()
+ t->dstream_pf = __insn_mfspr(SPR_DSTREAM_PF);
+#endif
}
static void restore_arch_state(const struct thread_struct *t)
#if CHIP_HAS_PROC_STATUS_SPR()
__insn_mtspr(SPR_PROC_STATUS, t->proc_status);
#endif
+#if !CHIP_HAS_FIXED_INTVEC_BASE()
+ __insn_mtspr(SPR_INTERRUPT_VECTOR_BASE_0, t->interrupt_vector_base);
+#endif
#if CHIP_HAS_TILE_RTF_HWM()
- /*
- * Clear this whenever we switch back to a process in case
- * the previous process was monkeying with it. Even if enabled
- * in CBOX_MSR1 via TILE_RTF_HWM_MIN, it's still just a
- * performance hint, so isn't worth a full save/restore.
- */
- __insn_mtspr(SPR_TILE_RTF_HWM, 0);
+ __insn_mtspr(SPR_TILE_RTF_HWM, t->tile_rtf_hwm);
+#endif
+#if CHIP_HAS_DSTREAM_PF()
+ __insn_mtspr(SPR_DSTREAM_PF, t->dstream_pf);
#endif
}
}
#ifdef CONFIG_COMPAT
-long _compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
- compat_uptr_t __user *envp, struct pt_regs *regs)
+long _compat_sys_execve(const char __user *path,
+ const compat_uptr_t __user *argv,
+ const compat_uptr_t __user *envp, struct pt_regs *regs)
{
long error;
char *filename;
regs->regs[51], regs->regs[52], regs->tp);
pr_err(" sp : "REGFMT" lr : "REGFMT"\n", regs->sp, regs->lr);
#else
- for (i = 0; i < 52; i += 3)
+ for (i = 0; i < 52; i += 4)
pr_err(" r%-2d: "REGFMT" r%-2d: "REGFMT
" r%-2d: "REGFMT" r%-2d: "REGFMT"\n",
i, regs->regs[i], i+1, regs->regs[i+1],
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
+ /*
+ * Enforce that sigcontext is like pt_regs, and doesn't mess
+ * up our stack alignment rules.
+ */
+ BUILD_BUG_ON(sizeof(struct sigcontext) != sizeof(struct pt_regs));
+ BUILD_BUG_ON(sizeof(struct sigcontext) % 8 != 0);
+
for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
- err |= __get_user(((long *)regs)[i],
- &((long __user *)(&sc->regs))[i]);
+ err |= __get_user(regs->regs[i], &sc->gregs[i]);
regs->faultnum = INT_SWINT_1_SIGRETURN;
- err |= __get_user(*pr0, &sc->regs.regs[0]);
+ err |= __get_user(*pr0, &sc->gregs[0]);
return err;
}
int i, err = 0;
for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
- err |= __put_user(((long *)regs)[i],
- &((long __user *)(&sc->regs))[i]);
+ err |= __put_user(regs->regs[i], &sc->gregs[i]);
return err;
}
* Set up registers for signal handler.
* Registers that we don't modify keep the value they had from
* user-space at the time we took the signal.
+ * We always pass siginfo and mcontext, regardless of SA_SIGINFO,
+ * since some things rely on this (e.g. glibc's debug/segfault.c).
*/
regs->pc = (unsigned long) ka->sa.sa_handler;
regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */
regs->sp = (unsigned long) frame;
regs->lr = restorer;
regs->regs[0] = (unsigned long) usig;
-
- if (ka->sa.sa_flags & SA_SIGINFO) {
- /* Need extra arguments, so mark to restore caller-saves. */
- regs->regs[1] = (unsigned long) &frame->info;
- regs->regs[2] = (unsigned long) &frame->uc;
- regs->flags |= PT_FLAGS_CALLER_SAVES;
- }
+ regs->regs[1] = (unsigned long) &frame->info;
+ regs->regs[2] = (unsigned long) &frame->uc;
+ regs->flags |= PT_FLAGS_CALLER_SAVES;
/*
* Notify any tracer that was single-stepping it.
pr_err(" <received signal %d>\n",
frame->info.si_signo);
}
- return &frame->uc.uc_mcontext.regs;
+ return (struct pt_regs *)&frame->uc.uc_mcontext;
}
return NULL;
}
ifdef CONFIG_CC_STACKPROTECTOR
cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
- ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(biarch)),y)
+ ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(KBUILD_CPPFLAGS) $(biarch)),y)
stackp-y := -fstack-protector
KBUILD_CFLAGS += $(stackp-y)
else
#endif /* CONFIG_X86_64 */
+#if __GNUC__ >= 4
/*
* Static testing of CPU features. Used the same as boot_cpu_has().
* These are only valid after alternatives have run, but will statically
*/
static __always_inline __pure bool __static_cpu_has(u16 bit)
{
-#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+#if __GNUC__ > 4 || __GNUC_MINOR__ >= 5
asm goto("1: jmp %l[t_no]\n"
"2:\n"
".section .altinstructions,\"a\"\n"
#endif
}
-#if __GNUC__ >= 4
#define static_cpu_has(bit) \
( \
__builtin_constant_p(boot_cpu_has(bit)) ? \
extern u8 hpet_blockid;
extern int hpet_force_user;
extern u8 hpet_msi_disable;
-extern u8 hpet_readback_cmp;
extern int is_hpet_enabled(void);
extern int hpet_enable(void);
extern void hpet_disable(void);
for (j = 0; j < 64; j++) {
if (!test_bit(j, &present))
continue;
- uv_blade_info[blade].pnode = (i * 64 + j);
+ pnode = (i * 64 + j);
+ uv_blade_info[blade].pnode = pnode;
uv_blade_info[blade].nr_possible_cpus = 0;
uv_blade_info[blade].nr_online_cpus = 0;
+ max_pnode = max(pnode, max_pnode);
blade++;
}
}
uv_cpu_hub_info(cpu)->scir.offset = uv_scir_offset(apicid);
uv_node_to_blade[nid] = blade;
uv_cpu_to_blade[cpu] = blade;
- max_pnode = max(pnode, max_pnode);
}
/* Add blade/pnode info for nodes without cpus */
pnode = (paddr >> m_val) & pnode_mask;
blade = boot_pnode_to_blade(pnode);
uv_node_to_blade[nid] = blade;
- max_pnode = max(pnode, max_pnode);
}
map_gru_high(max_pnode);
#include <asm/apic.h>
#include <asm/iommu.h>
#include <asm/gart.h>
-#include <asm/hpet.h>
static void __init fix_hypertransport_config(int num, int slot, int func)
{
}
#endif
-/*
- * Force the read back of the CMP register in hpet_next_event()
- * to work around the problem that the CMP register write seems to be
- * delayed. See hpet_next_event() for details.
- *
- * We do this on all SMBUS incarnations for now until we have more
- * information about the affected chipsets.
- */
-static void __init ati_hpet_bugs(int num, int slot, int func)
-{
-#ifdef CONFIG_HPET_TIMER
- hpet_readback_cmp = 1;
-#endif
-}
-
#define QFLAG_APPLY_ONCE 0x1
#define QFLAG_APPLIED 0x2
#define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
- { PCI_VENDOR_ID_ATI, PCI_ANY_ID,
- PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_hpet_bugs },
{}
};
unsigned long hpet_address;
u8 hpet_blockid; /* OS timer block num */
u8 hpet_msi_disable;
-u8 hpet_readback_cmp;
#ifdef CONFIG_PCI_MSI
static unsigned long hpet_num_timers;
* at that point and we would wait for the next hpet interrupt
* forever. We found out that reading the CMP register back
* forces the transfer so we can rely on the comparison with
- * the counter register below.
+ * the counter register below. If the read back from the
+ * compare register does not match the value we programmed
+ * then we might have a real hardware problem. We can not do
+ * much about it here, but at least alert the user/admin with
+ * a prominent warning.
*
- * That works fine on those ATI chipsets, but on newer Intel
- * chipsets (ICH9...) this triggers due to an erratum: Reading
- * the comparator immediately following a write is returning
- * the old value.
+ * An erratum on some chipsets (ICH9,..), results in
+ * comparator read immediately following a write returning old
+ * value. Workaround for this is to read this value second
+ * time, when first read returns old value.
*
- * We restrict the read back to the affected ATI chipsets (set
- * by quirks) and also run it with hpet=verbose for debugging
- * purposes.
+ * In fact the write to the comparator register is delayed up
+ * to two HPET cycles so the workaround we tried to restrict
+ * the readback to those known to be borked ATI chipsets
+ * failed miserably. So we give up on optimizations forever
+ * and penalize all HPET incarnations unconditionally.
*/
- if (hpet_readback_cmp || hpet_verbose) {
- u32 cmp = hpet_readl(HPET_Tn_CMP(timer));
-
- if (cmp != cnt)
+ if (unlikely((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt)) {
+ if (hpet_readl(HPET_Tn_CMP(timer)) != cnt)
printk_once(KERN_WARNING
- "hpet: compare register read back failed.\n");
+ "hpet: compare register read back failed.\n");
}
return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
if (connector->funcs->force)
connector->funcs->force(connector);
} else {
- connector->status = connector->funcs->detect(connector);
- drm_helper_hpd_irq_event(dev);
+ connector->status = connector->funcs->detect(connector, true);
+ drm_kms_helper_poll_enable(dev);
}
if (connector->status == connector_status_disconnected) {
mode_changed = true;
if (mode_changed) {
- old_fb = set->crtc->fb;
- set->crtc->fb = set->fb;
set->crtc->enabled = (set->mode != NULL);
if (set->mode != NULL) {
DRM_DEBUG_KMS("attempting to set mode from"
" userspace\n");
drm_mode_debug_printmodeline(set->mode);
+ old_fb = set->crtc->fb;
+ set->crtc->fb = set->fb;
if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
set->x, set->y,
old_fb)) {
!(connector->polled & DRM_CONNECTOR_POLL_HPD))
continue;
- status = connector->funcs->detect(connector);
+ status = connector->funcs->detect(connector, false);
if (old_status != status)
changed = true;
}
dev->hose = pdev->sysdata;
#endif
+ mutex_lock(&drm_global_mutex);
+
if ((ret = drm_fill_in_dev(dev, ent, driver))) {
printk(KERN_ERR "DRM: Fill_in_dev failed.\n");
goto err_g2;
driver->name, driver->major, driver->minor, driver->patchlevel,
driver->date, pci_name(pdev), dev->primary->index);
+ mutex_unlock(&drm_global_mutex);
return 0;
err_g4:
pci_disable_device(pdev);
err_g1:
kfree(dev);
+ mutex_unlock(&drm_global_mutex);
return ret;
}
EXPORT_SYMBOL(drm_get_pci_dev);
dev->platformdev = platdev;
dev->dev = &platdev->dev;
+ mutex_lock(&drm_global_mutex);
+
ret = drm_fill_in_dev(dev, NULL, driver);
if (ret) {
list_add_tail(&dev->driver_item, &driver->device_list);
+ mutex_unlock(&drm_global_mutex);
+
DRM_INFO("Initialized %s %d.%d.%d %s on minor %d\n",
driver->name, driver->major, driver->minor, driver->patchlevel,
driver->date, dev->primary->index);
drm_put_minor(&dev->control);
err_g1:
kfree(dev);
+ mutex_unlock(&drm_global_mutex);
return ret;
}
EXPORT_SYMBOL(drm_get_platform_dev);
struct drm_connector *connector = to_drm_connector(device);
enum drm_connector_status status;
- status = connector->funcs->detect(connector);
+ status = connector->funcs->detect(connector, true);
return snprintf(buf, PAGE_SIZE, "%s\n",
drm_get_connector_status_name(status));
}
return status;
}
-static enum drm_connector_status intel_crt_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_crt_detect(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
struct drm_encoder *encoder = intel_attached_encoder(connector);
if (intel_crt_detect_ddc(encoder))
return connector_status_connected;
+ if (!force)
+ return connector->status;
+
/* for pre-945g platforms use load detect */
if (encoder->crtc && encoder->crtc->enabled) {
status = intel_crt_load_detect(encoder->crtc, intel_encoder);
* \return false if DP port is disconnected.
*/
static enum drm_connector_status
-intel_dp_detect(struct drm_connector *connector)
+intel_dp_detect(struct drm_connector *connector, bool force)
{
struct drm_encoder *encoder = intel_attached_encoder(connector);
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
*
* Unimplemented.
*/
-static enum drm_connector_status intel_dvo_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_dvo_detect(struct drm_connector *connector, bool force)
{
struct drm_encoder *encoder = intel_attached_encoder(connector);
struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
}
static enum drm_connector_status
-intel_hdmi_detect(struct drm_connector *connector)
+intel_hdmi_detect(struct drm_connector *connector, bool force)
{
struct drm_encoder *encoder = intel_attached_encoder(connector);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
* connected and closed means disconnected. We also send hotplug events as
* needed, using lid status notification from the input layer.
*/
-static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_lvds_detect(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
enum drm_connector_status status = connector_status_connected;
* the LID nofication event.
*/
if (connector)
- connector->status = connector->funcs->detect(connector);
+ connector->status = connector->funcs->detect(connector,
+ false);
+
/* Don't force modeset on machines where it causes a GPU lockup */
if (dmi_check_system(intel_no_modeset_on_lid))
return NOTIFY_OK;
if (!analog_connector)
return false;
- if (analog_connector->funcs->detect(analog_connector) ==
+ if (analog_connector->funcs->detect(analog_connector, false) ==
connector_status_disconnected)
return false;
return status;
}
-static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_sdvo_detect(struct drm_connector *connector, bool force)
{
uint16_t response;
struct drm_encoder *encoder = intel_attached_encoder(connector);
* we have a pipe programmed in order to probe the TV.
*/
static enum drm_connector_status
-intel_tv_detect(struct drm_connector *connector)
+intel_tv_detect(struct drm_connector *connector, bool force)
{
struct drm_display_mode mode;
struct drm_encoder *encoder = intel_attached_encoder(connector);
if (encoder->crtc && encoder->crtc->enabled) {
type = intel_tv_detect_type(intel_tv);
- } else {
+ } else if (force) {
struct drm_crtc *crtc;
int dpms_mode;
intel_release_load_detect_pipe(&intel_tv->base, connector,
dpms_mode);
} else
- type = -1;
- }
-
- intel_tv->type = type;
+ return connector_status_unknown;
+ } else
+ return connector->status;
if (type < 0)
return connector_status_disconnected;
}
static enum drm_connector_status
-nouveau_connector_detect(struct drm_connector *connector)
+nouveau_connector_detect(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
struct nouveau_connector *nv_connector = nouveau_connector(connector);
}
static enum drm_connector_status
-nouveau_connector_detect_lvds(struct drm_connector *connector)
+nouveau_connector_detect_lvds(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
struct drm_nouveau_private *dev_priv = dev->dev_private;
/* Try retrieving EDID via DDC */
if (!dev_priv->vbios.fp_no_ddc) {
- status = nouveau_connector_detect(connector);
+ status = nouveau_connector_detect(connector, force);
if (status == connector_status_connected)
goto out;
}
pll->algo = PLL_ALGO_LEGACY;
pll->flags |= RADEON_PLL_PREFER_CLOSEST_LOWER;
}
- /* There is some evidence (often anecdotal) that RV515 LVDS
+ /* There is some evidence (often anecdotal) that RV515/RV620 LVDS
* (on some boards at least) prefers the legacy algo. I'm not
* sure whether this should handled generically or on a
* case-by-case quirk basis. Both algos should work fine in the
* majority of cases.
*/
if ((radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) &&
- (rdev->family == CHIP_RV515)) {
+ ((rdev->family == CHIP_RV515) ||
+ (rdev->family == CHIP_RV620))) {
/* allow the user to overrride just in case */
if (radeon_new_pll == 1)
pll->algo = PLL_ALGO_NEW;
EVERGREEN_MAX_BACKENDS_MASK));
break;
}
- } else
- gb_backend_map =
- evergreen_get_tile_pipe_to_backend_map(rdev,
- rdev->config.evergreen.max_tile_pipes,
- rdev->config.evergreen.max_backends,
- ((EVERGREEN_MAX_BACKENDS_MASK <<
- rdev->config.evergreen.max_backends) &
- EVERGREEN_MAX_BACKENDS_MASK));
+ } else {
+ switch (rdev->family) {
+ case CHIP_CYPRESS:
+ case CHIP_HEMLOCK:
+ gb_backend_map = 0x66442200;
+ break;
+ case CHIP_JUNIPER:
+ gb_backend_map = 0x00006420;
+ break;
+ default:
+ gb_backend_map =
+ evergreen_get_tile_pipe_to_backend_map(rdev,
+ rdev->config.evergreen.max_tile_pipes,
+ rdev->config.evergreen.max_backends,
+ ((EVERGREEN_MAX_BACKENDS_MASK <<
+ rdev->config.evergreen.max_backends) &
+ EVERGREEN_MAX_BACKENDS_MASK));
+ }
+ }
rdev->config.evergreen.tile_config = gb_addr_config;
WREG32(GB_BACKEND_MAP, gb_backend_map);
return false;
}
elapsed = jiffies_to_msecs(cjiffies - lockup->last_jiffies);
- if (elapsed >= 3000) {
- /* very likely the improbable case where current
- * rptr is equal to last recorded, a while ago, rptr
- * this is more likely a false positive update tracking
- * information which should force us to be recall at
- * latter point
- */
- lockup->last_cp_rptr = cp->rptr;
- lockup->last_jiffies = jiffies;
- return false;
- }
- if (elapsed >= 1000) {
+ if (elapsed >= 10000) {
dev_err(rdev->dev, "GPU lockup CP stall for more than %lumsec\n", elapsed);
return true;
}
unsigned long size;
unsigned prim_walk;
unsigned nverts;
+ unsigned num_cb = track->num_cb;
- for (i = 0; i < track->num_cb; i++) {
+ if (!track->zb_cb_clear && !track->color_channel_mask &&
+ !track->blend_read_enable)
+ num_cb = 0;
+
+ for (i = 0; i < num_cb; i++) {
if (track->cb[i].robj == NULL) {
- if (!(track->zb_cb_clear || track->color_channel_mask ||
- track->blend_read_enable)) {
- continue;
- }
DRM_ERROR("[drm] No buffer for color buffer %d !\n", i);
return -EINVAL;
}
+/*
+ * Copyright 2009 Advanced Micro Devices, Inc.
+ * Copyright 2009 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ */
+
#include "drmP.h"
#include "drm.h"
#include "radeon_drm.h"
+/*
+ * Copyright 2009 Advanced Micro Devices, Inc.
+ * Copyright 2009 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ */
#ifndef R600_BLIT_SHADERS_H
#define R600_BLIT_SHADERS_H
/* using get ib will give us the offset into the mipmap bo */
word0 = radeon_get_ib_value(p, idx + 3) << 8;
if ((mipmap_size + word0) > radeon_bo_size(mipmap)) {
- dev_warn(p->dev, "mipmap bo too small (%d %d %d %d %d %d -> %d have %ld)\n",
- w0, h0, bpe, blevel, nlevels, word0, mipmap_size, radeon_bo_size(texture));
- return -EINVAL;
+ /*dev_warn(p->dev, "mipmap bo too small (%d %d %d %d %d %d -> %d have %ld)\n",
+ w0, h0, bpe, blevel, nlevels, word0, mipmap_size, radeon_bo_size(texture));*/
}
return 0;
}
/* PowerMac8,1 ? */
/* imac g5 isight */
rdev->mode_info.connector_table = CT_IMAC_G5_ISIGHT;
+ } else if ((rdev->pdev->device == 0x4a48) &&
+ (rdev->pdev->subsystem_vendor == 0x1002) &&
+ (rdev->pdev->subsystem_device == 0x4a48)) {
+ /* Mac X800 */
+ rdev->mode_info.connector_table = CT_MAC_X800;
} else
#endif /* CONFIG_PPC_PMAC */
#ifdef CONFIG_PPC64
CONNECTOR_OBJECT_ID_VGA,
&hpd);
break;
+ case CT_MAC_X800:
+ DRM_INFO("Connector Table: %d (mac x800)\n",
+ rdev->mode_info.connector_table);
+ /* DVI - primary dac, internal tmds */
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
+ hpd.hpd = RADEON_HPD_1; /* ??? */
+ radeon_add_legacy_encoder(dev,
+ radeon_get_encoder_enum(dev,
+ ATOM_DEVICE_DFP1_SUPPORT,
+ 0),
+ ATOM_DEVICE_DFP1_SUPPORT);
+ radeon_add_legacy_encoder(dev,
+ radeon_get_encoder_enum(dev,
+ ATOM_DEVICE_CRT1_SUPPORT,
+ 1),
+ ATOM_DEVICE_CRT1_SUPPORT);
+ radeon_add_legacy_connector(dev, 0,
+ ATOM_DEVICE_DFP1_SUPPORT |
+ ATOM_DEVICE_CRT1_SUPPORT,
+ DRM_MODE_CONNECTOR_DVII, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I,
+ &hpd);
+ /* DVI - tv dac, dvo */
+ ddc_i2c = combios_setup_i2c_bus(rdev, DDC_MONID, 0, 0);
+ hpd.hpd = RADEON_HPD_2; /* ??? */
+ radeon_add_legacy_encoder(dev,
+ radeon_get_encoder_enum(dev,
+ ATOM_DEVICE_DFP2_SUPPORT,
+ 0),
+ ATOM_DEVICE_DFP2_SUPPORT);
+ radeon_add_legacy_encoder(dev,
+ radeon_get_encoder_enum(dev,
+ ATOM_DEVICE_CRT2_SUPPORT,
+ 2),
+ ATOM_DEVICE_CRT2_SUPPORT);
+ radeon_add_legacy_connector(dev, 1,
+ ATOM_DEVICE_DFP2_SUPPORT |
+ ATOM_DEVICE_CRT2_SUPPORT,
+ DRM_MODE_CONNECTOR_DVII, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I,
+ &hpd);
+ break;
default:
DRM_INFO("Connector table: %d (invalid)\n",
rdev->mode_info.connector_table);
return MODE_OK;
}
-static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connector)
+static enum drm_connector_status
+radeon_lvds_detect(struct drm_connector *connector, bool force)
{
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
struct drm_encoder *encoder = radeon_best_single_encoder(connector);
return MODE_OK;
}
-static enum drm_connector_status radeon_vga_detect(struct drm_connector *connector)
+static enum drm_connector_status
+radeon_vga_detect(struct drm_connector *connector, bool force)
{
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
struct drm_encoder *encoder;
return MODE_OK;
}
-static enum drm_connector_status radeon_tv_detect(struct drm_connector *connector)
+static enum drm_connector_status
+radeon_tv_detect(struct drm_connector *connector, bool force)
{
struct drm_encoder *encoder;
struct drm_encoder_helper_funcs *encoder_funcs;
* we have to check if this analog encoder is shared with anyone else (TV)
* if its shared we have to set the other connector to disconnected.
*/
-static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connector)
+static enum drm_connector_status
+radeon_dvi_detect(struct drm_connector *connector, bool force)
{
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
struct drm_encoder *encoder = NULL;
return ret;
}
-static enum drm_connector_status radeon_dp_detect(struct drm_connector *connector)
+static enum drm_connector_status
+radeon_dp_detect(struct drm_connector *connector, bool force)
{
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
enum drm_connector_status ret = connector_status_disconnected;
radeon_crtc->rmx_type = radeon_encoder->rmx_type;
else
radeon_crtc->rmx_type = RMX_OFF;
- src_v = crtc->mode.vdisplay;
- dst_v = radeon_crtc->native_mode.vdisplay;
- src_h = crtc->mode.hdisplay;
- dst_h = radeon_crtc->native_mode.vdisplay;
/* copy native mode */
memcpy(&radeon_crtc->native_mode,
&radeon_encoder->native_mode,
sizeof(struct drm_display_mode));
+ src_v = crtc->mode.vdisplay;
+ dst_v = radeon_crtc->native_mode.vdisplay;
+ src_h = crtc->mode.hdisplay;
+ dst_h = radeon_crtc->native_mode.hdisplay;
/* fix up for overscan on hdmi */
if (ASIC_IS_AVIVO(rdev) &&
+ (!(mode->flags & DRM_MODE_FLAG_INTERLACE)) &&
((radeon_encoder->underscan_type == UNDERSCAN_ON) ||
((radeon_encoder->underscan_type == UNDERSCAN_AUTO) &&
drm_detect_hdmi_monitor(radeon_connector->edid) &&
/* mostly for macs, but really any system without connector tables */
enum radeon_connector_table {
- CT_NONE,
+ CT_NONE = 0,
CT_GENERIC,
CT_IBOOK,
CT_POWERBOOK_EXTERNAL,
CT_IMAC_G5_ISIGHT,
CT_EMAC,
CT_RN50_POWER,
+ CT_MAC_X800,
};
enum radeon_dvo_chip {
}
static enum drm_connector_status
- vmw_ldu_connector_detect(struct drm_connector *connector)
+ vmw_ldu_connector_detect(struct drm_connector *connector,
+ bool force)
{
if (vmw_connector_to_ldu(connector)->pref_active)
return connector_status_connected;
drm_connector_init(dev, connector, &vmw_legacy_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
- connector->status = vmw_ldu_connector_detect(connector);
+ connector->status = vmw_ldu_connector_detect(connector, true);
drm_encoder_init(dev, encoder, &vmw_legacy_encoder_funcs,
DRM_MODE_ENCODER_LVDS);
ldu->pref_height = 600;
ldu->pref_active = false;
}
- con->status = vmw_ldu_connector_detect(con);
+ con->status = vmw_ldu_connector_detect(con, true);
}
mutex_unlock(&dev->mode_config.mutex);
unsigned int vcc,
void *priv_data)
{
- int *has_shmem = priv_data;
+ int *priv = priv_data;
+ int try = (*priv & 0x1);
int i;
cistpl_io_t *io = &cfg->io;
i = p_dev->resource[1]->end = 0;
}
- *has_shmem = ((cfg->mem.nwin == 1) &&
- (cfg->mem.win[0].len >= 0x4000));
+ *priv &= ((cfg->mem.nwin == 1) &&
+ (cfg->mem.win[0].len >= 0x4000)) ? 0x10 : ~0x10;
+
p_dev->resource[0]->start = io->win[i].base;
p_dev->resource[0]->end = io->win[i].len;
- p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ if (!try)
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ else
+ p_dev->io_lines = 16;
if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
return try_io_port(p_dev);
- return 0;
+ return -EINVAL;
+}
+
+static hw_info_t *pcnet_try_config(struct pcmcia_device *link,
+ int *has_shmem, int try)
+{
+ struct net_device *dev = link->priv;
+ hw_info_t *local_hw_info;
+ pcnet_dev_t *info = PRIV(dev);
+ int priv = try;
+ int ret;
+
+ ret = pcmcia_loop_config(link, pcnet_confcheck, &priv);
+ if (ret) {
+ dev_warn(&link->dev, "no useable port range found\n");
+ return NULL;
+ }
+ *has_shmem = (priv & 0x10);
+
+ if (!link->irq)
+ return NULL;
+
+ if (resource_size(link->resource[1]) == 8) {
+ link->conf.Attributes |= CONF_ENABLE_SPKR;
+ link->conf.Status = CCSR_AUDIO_ENA;
+ }
+ if ((link->manf_id == MANFID_IBM) &&
+ (link->card_id == PRODID_IBM_HOME_AND_AWAY))
+ link->conf.ConfigIndex |= 0x10;
+
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ return NULL;
+
+ dev->irq = link->irq;
+ dev->base_addr = link->resource[0]->start;
+
+ if (info->flags & HAS_MISC_REG) {
+ if ((if_port == 1) || (if_port == 2))
+ dev->if_port = if_port;
+ else
+ dev_notice(&link->dev, "invalid if_port requested\n");
+ } else
+ dev->if_port = 0;
+
+ if ((link->conf.ConfigBase == 0x03c0) &&
+ (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
+ dev_info(&link->dev,
+ "this is an AX88190 card - use axnet_cs instead.\n");
+ return NULL;
+ }
+
+ local_hw_info = get_hwinfo(link);
+ if (!local_hw_info)
+ local_hw_info = get_prom(link);
+ if (!local_hw_info)
+ local_hw_info = get_dl10019(link);
+ if (!local_hw_info)
+ local_hw_info = get_ax88190(link);
+ if (!local_hw_info)
+ local_hw_info = get_hwired(link);
+
+ return local_hw_info;
}
static int pcnet_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
pcnet_dev_t *info = PRIV(dev);
- int ret, start_pg, stop_pg, cm_offset;
+ int start_pg, stop_pg, cm_offset;
int has_shmem = 0;
hw_info_t *local_hw_info;
dev_dbg(&link->dev, "pcnet_config\n");
- ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
- if (ret)
- goto failed;
-
- if (!link->irq)
- goto failed;
-
- if (resource_size(link->resource[1]) == 8) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
- if ((link->manf_id == MANFID_IBM) &&
- (link->card_id == PRODID_IBM_HOME_AND_AWAY))
- link->conf.ConfigIndex |= 0x10;
-
- ret = pcmcia_request_configuration(link, &link->conf);
- if (ret)
- goto failed;
- dev->irq = link->irq;
- dev->base_addr = link->resource[0]->start;
- if (info->flags & HAS_MISC_REG) {
- if ((if_port == 1) || (if_port == 2))
- dev->if_port = if_port;
- else
- printk(KERN_NOTICE "pcnet_cs: invalid if_port requested\n");
- } else {
- dev->if_port = 0;
- }
-
- if ((link->conf.ConfigBase == 0x03c0) &&
- (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
- printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n");
- printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n");
- goto failed;
- }
-
- local_hw_info = get_hwinfo(link);
- if (local_hw_info == NULL)
- local_hw_info = get_prom(link);
- if (local_hw_info == NULL)
- local_hw_info = get_dl10019(link);
- if (local_hw_info == NULL)
- local_hw_info = get_ax88190(link);
- if (local_hw_info == NULL)
- local_hw_info = get_hwired(link);
-
- if (local_hw_info == NULL) {
- printk(KERN_NOTICE "pcnet_cs: unable to read hardware net"
- " address for io base %#3lx\n", dev->base_addr);
- goto failed;
+ local_hw_info = pcnet_try_config(link, &has_shmem, 0);
+ if (!local_hw_info) {
+ /* check whether forcing io_lines to 16 helps... */
+ pcmcia_disable_device(link);
+ local_hw_info = pcnet_try_config(link, &has_shmem, 1);
+ if (local_hw_info == NULL) {
+ dev_notice(&link->dev, "unable to read hardware net"
+ " address for io base %#3lx\n", dev->base_addr);
+ goto failed;
+ }
}
info->flags = local_hw_info->flags;
c = p_dev->function_config;
if (!(c->state & CONFIG_LOCKED)) {
- dev_dbg(&s->dev, "Configuration isnt't locked\n");
+ dev_dbg(&p_dev->dev, "Configuration isnt't locked\n");
mutex_unlock(&s->ops_mutex);
return -EACCES;
}
s->win[w].card_start = offset;
ret = s->ops->set_mem_map(s, &s->win[w]);
if (ret)
- dev_warn(&s->dev, "failed to set_mem_map\n");
+ dev_warn(&p_dev->dev, "failed to set_mem_map\n");
mutex_unlock(&s->ops_mutex);
return ret;
} /* pcmcia_map_mem_page */
c = p_dev->function_config;
if (!(s->state & SOCKET_PRESENT)) {
- dev_dbg(&s->dev, "No card present\n");
+ dev_dbg(&p_dev->dev, "No card present\n");
ret = -ENODEV;
goto unlock;
}
if (!(c->state & CONFIG_LOCKED)) {
- dev_dbg(&s->dev, "Configuration isnt't locked\n");
+ dev_dbg(&p_dev->dev, "Configuration isnt't locked\n");
ret = -EACCES;
goto unlock;
}
if (mod->Attributes & (CONF_IRQ_CHANGE_VALID | CONF_VCC_CHANGE_VALID)) {
- dev_dbg(&s->dev,
+ dev_dbg(&p_dev->dev,
"changing Vcc or IRQ is not allowed at this time\n");
ret = -EINVAL;
goto unlock;
if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) &&
(mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
if (mod->Vpp1 != mod->Vpp2) {
- dev_dbg(&s->dev, "Vpp1 and Vpp2 must be the same\n");
+ dev_dbg(&p_dev->dev,
+ "Vpp1 and Vpp2 must be the same\n");
ret = -EINVAL;
goto unlock;
}
s->socket.Vpp = mod->Vpp1;
if (s->ops->set_socket(s, &s->socket)) {
- dev_printk(KERN_WARNING, &s->dev,
+ dev_printk(KERN_WARNING, &p_dev->dev,
"Unable to set VPP\n");
ret = -EIO;
goto unlock;
}
} else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) ||
(mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
- dev_dbg(&s->dev, "changing Vcc is not allowed at this time\n");
+ dev_dbg(&p_dev->dev,
+ "changing Vcc is not allowed at this time\n");
ret = -EINVAL;
goto unlock;
}
win = &s->win[w];
if (!(p_dev->_win & CLIENT_WIN_REQ(w))) {
- dev_dbg(&s->dev, "not releasing unknown window\n");
+ dev_dbg(&p_dev->dev, "not releasing unknown window\n");
mutex_unlock(&s->ops_mutex);
return -EINVAL;
}
return -ENODEV;
if (req->IntType & INT_CARDBUS) {
- dev_dbg(&s->dev, "IntType may not be INT_CARDBUS\n");
+ dev_dbg(&p_dev->dev, "IntType may not be INT_CARDBUS\n");
return -EINVAL;
}
c = p_dev->function_config;
if (c->state & CONFIG_LOCKED) {
mutex_unlock(&s->ops_mutex);
- dev_dbg(&s->dev, "Configuration is locked\n");
+ dev_dbg(&p_dev->dev, "Configuration is locked\n");
return -EACCES;
}
s->socket.Vpp = req->Vpp;
if (s->ops->set_socket(s, &s->socket)) {
mutex_unlock(&s->ops_mutex);
- dev_printk(KERN_WARNING, &s->dev,
+ dev_printk(KERN_WARNING, &p_dev->dev,
"Unable to set socket state\n");
return -EINVAL;
}
int ret = -EINVAL;
mutex_lock(&s->ops_mutex);
- dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]);
+ dev_dbg(&p_dev->dev, "pcmcia_request_io: %pR , %pR",
+ &c->io[0], &c->io[1]);
if (!(s->state & SOCKET_PRESENT)) {
- dev_dbg(&s->dev, "pcmcia_request_io: No card present\n");
+ dev_dbg(&p_dev->dev, "pcmcia_request_io: No card present\n");
goto out;
}
if (c->state & CONFIG_LOCKED) {
- dev_dbg(&s->dev, "Configuration is locked\n");
+ dev_dbg(&p_dev->dev, "Configuration is locked\n");
goto out;
}
if (c->state & CONFIG_IO_REQ) {
- dev_dbg(&s->dev, "IO already configured\n");
+ dev_dbg(&p_dev->dev, "IO already configured\n");
goto out;
}
c->state |= CONFIG_IO_REQ;
p_dev->_io = 1;
- dev_dbg(&s->dev, "pcmcia_request_io succeeded: %pR , %pR",
+ dev_dbg(&p_dev->dev, "pcmcia_request_io succeeded: %pR , %pR",
&c->io[0], &c->io[1]);
out:
mutex_unlock(&s->ops_mutex);
int w;
if (!(s->state & SOCKET_PRESENT)) {
- dev_dbg(&s->dev, "No card present\n");
+ dev_dbg(&p_dev->dev, "No card present\n");
return -ENODEV;
}
req->Size = s->map_size;
align = (s->features & SS_CAP_MEM_ALIGN) ? req->Size : s->map_size;
if (req->Size & (s->map_size-1)) {
- dev_dbg(&s->dev, "invalid map size\n");
+ dev_dbg(&p_dev->dev, "invalid map size\n");
return -EINVAL;
}
if ((req->Base && (s->features & SS_CAP_STATIC_MAP)) ||
(req->Base & (align-1))) {
- dev_dbg(&s->dev, "invalid base address\n");
+ dev_dbg(&p_dev->dev, "invalid base address\n");
return -EINVAL;
}
if (req->Base)
if (!(s->state & SOCKET_WIN_REQ(w)))
break;
if (w == MAX_WIN) {
- dev_dbg(&s->dev, "all windows are used already\n");
+ dev_dbg(&p_dev->dev, "all windows are used already\n");
mutex_unlock(&s->ops_mutex);
return -EINVAL;
}
win->res = pcmcia_find_mem_region(req->Base, req->Size, align,
0, s);
if (!win->res) {
- dev_dbg(&s->dev, "allocating mem region failed\n");
+ dev_dbg(&p_dev->dev, "allocating mem region failed\n");
mutex_unlock(&s->ops_mutex);
return -EINVAL;
}
win->card_start = 0;
if (s->ops->set_mem_map(s, win) != 0) {
- dev_dbg(&s->dev, "failed to set memory mapping\n");
+ dev_dbg(&p_dev->dev, "failed to set memory mapping\n");
mutex_unlock(&s->ops_mutex);
return -EIO;
}
if (win->res)
request_resource(&iomem_resource, res);
- dev_dbg(&s->dev, "request_window results in %pR\n", res);
+ dev_dbg(&p_dev->dev, "request_window results in %pR\n", res);
mutex_unlock(&s->ops_mutex);
*wh = res;
empty_design_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN;
now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
+ break;
case SOURCE_VOLTAGE:
full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX;
empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN;
{
u32 data[3];
u8 *p = (u8 *)&data[1];
- int err = intel_scu_ipc_command(IPC_CMD_BATTERY_PROPERTY,
- IPCMSG_BATTERY, NULL, 0, data, 3);
+ int err = intel_scu_ipc_command(IPCMSG_BATTERY,
+ IPC_CMD_BATTERY_PROPERTY, NULL, 0, data, 3);
prop->capacity = data[0];
prop->crnt = *p++;
static int pmic_scu_ipc_set_charger(int charger)
{
- return intel_scu_ipc_simple_command(charger, IPCMSG_BATTERY);
+ return intel_scu_ipc_simple_command(IPCMSG_BATTERY, charger);
}
/**
struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
int ret = -EINVAL;
- if (info->vol_table && (index < (2 << info->vol_nbits))) {
+ if (info->vol_table && (index < (1 << info->vol_nbits))) {
ret = info->vol_table[index];
if (info->slope_double)
ret <<= 1;
max_uV = max_uV >> 1;
}
if (info->vol_table) {
- for (i = 0; i < (2 << info->vol_nbits); i++) {
+ for (i = 0; i < (1 << info->vol_nbits); i++) {
if (!info->vol_table[i])
break;
if ((min_uV <= info->vol_table[i])
"%s: failed to register regulator %s err %d\n",
__func__, ab3100_regulator_desc[i].name,
err);
- i--;
/* remove the already registered regulators */
- while (i > 0) {
+ while (--i >= 0)
regulator_unregister(ab3100_regulators[i].rdev);
- i--;
- }
return err;
}
if (info->fixed_uV)
return info->fixed_uV;
- if (selector > info->voltages_len)
+ if (selector >= info->voltages_len)
return -EINVAL;
return info->supported_voltages[selector];
static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
- struct ab8500_platform_data *pdata = dev_get_platdata(ab8500->dev);
+ struct ab8500_platform_data *pdata;
int i, err;
if (!ab8500) {
dev_err(&pdev->dev, "null mfd parent\n");
return -EINVAL;
}
+ pdata = dev_get_platdata(ab8500->dev);
/* register all regulators */
for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
info->desc.name);
/* when we fail, un-register all earlier regulators */
- i--;
- while (i > 0) {
+ while (--i >= 0) {
info = &ab8500_regulator_info[i];
regulator_unregister(info->regulator);
- i--;
}
return err;
}
unsigned int current_level;
unsigned int current_mask;
unsigned int current_offset;
- struct regulator_dev rdev;
+ struct regulator_dev *rdev;
};
static int ad5398_calc_current(struct ad5398_chip_info *chip,
static int __devinit ad5398_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct regulator_dev *rdev;
struct regulator_init_data *init_data = client->dev.platform_data;
struct ad5398_chip_info *chip;
const struct ad5398_current_data_format *df =
chip->current_offset = df->current_offset;
chip->current_mask = (chip->current_level - 1) << chip->current_offset;
- rdev = regulator_register(&ad5398_reg, &client->dev, init_data, chip);
- if (IS_ERR(rdev)) {
- ret = PTR_ERR(rdev);
+ chip->rdev = regulator_register(&ad5398_reg, &client->dev,
+ init_data, chip);
+ if (IS_ERR(chip->rdev)) {
+ ret = PTR_ERR(chip->rdev);
dev_err(&client->dev, "failed to register %s %s\n",
id->name, ad5398_reg.name);
goto err;
{
struct ad5398_chip_info *chip = i2c_get_clientdata(client);
- regulator_unregister(&chip->rdev);
+ regulator_unregister(chip->rdev);
kfree(chip);
i2c_set_clientdata(client, NULL);
mutex_init(&pmic->mtx);
for (i = 0; i < 3; i++) {
- pmic->rdev[i] = regulator_register(&isl_rd[0], &i2c->dev,
+ pmic->rdev[i] = regulator_register(&isl_rd[i], &i2c->dev,
init_data, pmic);
if (IS_ERR(pmic->rdev[i])) {
dev_err(&i2c->dev, "failed to register %s\n", id->name);
if (max_uV < MAX1586_V6_MIN_UV || max_uV > MAX1586_V6_MAX_UV)
return -EINVAL;
- if (min_uV >= 3000000)
- selector = 3;
- if (min_uV < 3000000)
- selector = 2;
- if (min_uV < 2500000)
- selector = 1;
if (min_uV < 1800000)
selector = 0;
+ else if (min_uV < 2500000)
+ selector = 1;
+ else if (min_uV < 3000000)
+ selector = 2;
+ else if (min_uV >= 3000000)
+ selector = 3;
if (max1586_v6_calc_voltage(selector) > max_uV)
return -EINVAL;
if (!max8998)
return -ENOMEM;
- size = sizeof(struct regulator_dev *) * (pdata->num_regulators + 1);
+ size = sizeof(struct regulator_dev *) * pdata->num_regulators;
max8998->rdev = kzalloc(size, GFP_KERNEL);
if (!max8998->rdev) {
kfree(max8998);
}
rdev = max8998->rdev;
+ max8998->dev = &pdev->dev;
max8998->iodev = iodev;
+ max8998->num_regulators = pdata->num_regulators;
platform_set_drvdata(pdev, max8998);
for (i = 0; i < pdata->num_regulators; i++) {
return 0;
err:
- for (i = 0; i <= max8998->num_regulators; i++)
+ for (i = 0; i < max8998->num_regulators; i++)
if (rdev[i])
regulator_unregister(rdev[i]);
struct regulator_dev **rdev = max8998->rdev;
int i;
- for (i = 0; i <= max8998->num_regulators; i++)
+ for (i = 0; i < max8998->num_regulators; i++)
if (rdev[i])
regulator_unregister(rdev[i]);
return error;
}
-/**
- * tps6507x_remove - TPS6507x driver i2c remove handler
- * @client: i2c driver client device structure
- *
- * Unregister TPS driver as an i2c client device driver
- */
static int __devexit tps6507x_pmic_remove(struct platform_device *pdev)
{
struct tps6507x_dev *tps6507x_dev = platform_get_drvdata(pdev);
mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
val = (val & mask) >> ri->volt_shift;
- if (val > ri->desc.n_voltages)
+ if (val >= ri->desc.n_voltages)
BUG();
return ri->voltages[val] * 1000;
if (ret)
return ret;
- return tps6586x_set_bits(parent, ri->go_reg, ri->go_bit);
+ return tps6586x_set_bits(parent, ri->go_reg, 1 << ri->go_bit);
}
static int tps6586x_regulator_enable(struct regulator_dev *rdev)
case REGULATOR_MODE_IDLE:
ret = wm831x_set_bits(wm831x, ctrl_reg,
- WM831X_LDO1_LP_MODE,
- WM831X_LDO1_LP_MODE);
+ WM831X_LDO1_LP_MODE, 0);
if (ret < 0)
return ret;
WM831X_LDO1_ON_MODE);
if (ret < 0)
return ret;
+ break;
case REGULATOR_MODE_STANDBY:
ret = wm831x_set_bits(wm831x, ctrl_reg,
- WM831X_LDO1_LP_MODE, 0);
+ WM831X_LDO1_LP_MODE,
+ WM831X_LDO1_LP_MODE);
if (ret < 0)
return ret;
mode = REGULATOR_MODE_NORMAL;
} else if (!active && !sleep)
mode = REGULATOR_MODE_IDLE;
- else if (!sleep)
+ else if (sleep)
mode = REGULATOR_MODE_STANDBY;
return mode;
info->p_dev = link;
link->priv = info;
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
if (do_sound) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
/*====================================================================*/
+static int pfc_config(struct pcmcia_device *p_dev)
+{
+ unsigned int port = 0;
+ struct serial_info *info = p_dev->priv;
+
+ if ((p_dev->resource[1]->end != 0) &&
+ (resource_size(p_dev->resource[1]) == 8)) {
+ port = p_dev->resource[1]->start;
+ info->slave = 1;
+ } else if ((info->manfid == MANFID_OSITECH) &&
+ (resource_size(p_dev->resource[0]) == 0x40)) {
+ port = p_dev->resource[0]->start + 0x28;
+ info->slave = 1;
+ }
+ if (info->slave)
+ return setup_serial(p_dev, info, port, p_dev->irq);
+
+ dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
+ return -ENODEV;
+}
+
static int simple_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
cistpl_cftable_entry_t *dflt,
struct serial_info *info = link->priv;
int i = -ENODEV, try;
- /* If the card is already configured, look up the port and irq */
- if (link->function_config) {
- unsigned int port = 0;
- if ((link->resource[1]->end != 0) &&
- (resource_size(link->resource[1]) == 8)) {
- port = link->resource[1]->end;
- info->slave = 1;
- } else if ((info->manfid == MANFID_OSITECH) &&
- (resource_size(link->resource[0]) == 0x40)) {
- port = link->resource[0]->start + 0x28;
- info->slave = 1;
- }
- if (info->slave) {
- return setup_serial(link, info, port,
- link->irq);
- }
- }
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 8;
/* First pass: look for a config entry that looks normal.
* Two tries: without IO aliases, then with aliases */
if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
goto found_port;
- printk(KERN_NOTICE
- "serial_cs: no usable port range found, giving up\n");
+ dev_warn(&link->dev, "no usable port range found, giving up\n");
return -1;
found_port:
int i, base2 = 0;
/* First, look for a generic full-sized window */
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[0]->end = info->multi * 8;
if (pcmcia_loop_config(link, multi_config_check, &base2)) {
/* If that didn't work, look for two windows */
info->multi = 2;
if (pcmcia_loop_config(link, multi_config_check_notpicky,
&base2)) {
- printk(KERN_NOTICE "serial_cs: no usable port range"
+ dev_warn(&link->dev, "no usable port range "
"found, giving up\n");
return -ENODEV;
}
}
if (!link->irq)
- dev_warn(&link->dev,
- "serial_cs: no usable IRQ found, continuing...\n");
+ dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
/*
* Apply any configuration quirks.
multifunction cards that ask for appropriate IO port ranges */
if ((info->multi == 0) &&
(link->has_func_id) &&
+ (link->socket->pcmcia_pfc == 0) &&
((link->func_id == CISTPL_FUNCID_MULTI) ||
(link->func_id == CISTPL_FUNCID_SERIAL)))
pcmcia_loop_config(link, serial_check_for_multi, info);
if (info->quirk && info->quirk->multi != -1)
info->multi = info->quirk->multi;
- if (info->multi > 1)
+ dev_info(&link->dev,
+ "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
+ link->manf_id, link->card_id,
+ link->socket->pcmcia_pfc, info->multi, info->quirk);
+ if (link->socket->pcmcia_pfc)
+ i = pfc_config(link);
+ else if (info->multi > 1)
i = multi_config(link);
else
i = simple_config(link);
return 0;
failed:
- dev_warn(&link->dev, "serial_cs: failed to initialize\n");
+ dev_warn(&link->dev, "failed to initialize\n");
serial_remove(link);
return -ENODEV;
}
{
struct viafb_ioctl_info viainfo;
+ memset(&viainfo, 0, sizeof(struct viafb_ioctl_info));
+
viainfo.viafb_id = VIAID;
viainfo.vendor_id = PCI_VIA_VENDOR_ID;
here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
config PNX4008_WATCHDOG
- tristate "PNX4008 Watchdog"
- depends on ARCH_PNX4008
+ tristate "PNX4008 and LPC32XX Watchdog"
+ depends on ARCH_PNX4008 || ARCH_LPC32XX
help
Say Y here if to include support for the watchdog timer
- in the PNX4008 processor.
+ in the PNX4008 or LPC32XX processor.
This driver can be built as a module by choosing M. The module
will be called pnx4008_wdt.
if (ret) {
printk(KERN_ERR "%s: failed to request irq 1 - %d\n",
ident.identity, ret);
- return ret;
+ goto out;
}
ret = misc_register(&sbwdog_miscdev);
printk(KERN_INFO "%s: timeout is %ld.%ld secs\n",
ident.identity,
timeout / 1000000, (timeout / 100000) % 10);
- } else
- free_irq(1, (void *)user_dog);
+ return 0;
+ }
+ free_irq(1, (void *)user_dog);
+out:
+ unregister_reboot_notifier(&sbwdog_notifier);
+
return ret;
}
static void __exit sbwdog_exit(void)
{
misc_deregister(&sbwdog_miscdev);
+ free_irq(1, (void *)user_dog);
+ unregister_reboot_notifier(&sbwdog_notifier);
}
module_init(sbwdog_init);
wdt->pdev = pdev;
mutex_init(&wdt->lock);
+ /* make sure that the watchdog is disabled */
+ ts72xx_wdt_stop(wdt);
+
error = misc_register(&ts72xx_wdt_miscdev);
if (error) {
dev_err(&pdev->dev, "failed to register miscdev\n");
if (ses) {
cFYI(1, "Existing smb sess found (status=%d)", ses->status);
- /* existing SMB ses has a server reference already */
- cifs_put_tcp_session(server);
-
mutex_lock(&ses->session_mutex);
rc = cifs_negotiate_protocol(xid, ses);
if (rc) {
}
}
mutex_unlock(&ses->session_mutex);
+
+ /* existing SMB ses has a server reference already */
+ cifs_put_tcp_session(server);
FreeXid(xid);
return ses;
}
void (*dpms)(struct drm_connector *connector, int mode);
void (*save)(struct drm_connector *connector);
void (*restore)(struct drm_connector *connector);
- enum drm_connector_status (*detect)(struct drm_connector *connector);
+
+ /* Check to see if anything is attached to the connector.
+ * @force is set to false whilst polling, true when checking the
+ * connector due to user request. @force can be used by the driver
+ * to avoid expensive, destructive operations during automated
+ * probing.
+ */
+ enum drm_connector_status (*detect)(struct drm_connector *connector,
+ bool force);
int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
int (*set_property)(struct drm_connector *connector, struct drm_property *property,
uint64_t val);
#define work_clear_pending(work) \
clear_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))
+/*
+ * Workqueue flags and constants. For details, please refer to
+ * Documentation/workqueue.txt.
+ */
enum {
WQ_NON_REENTRANT = 1 << 0, /* guarantee non-reentrance */
WQ_UNBOUND = 1 << 1, /* not bound to any cpu */
/*
- * linux/kernel/workqueue.c
+ * kernel/workqueue.c - generic async execution with shared worker pool
*
- * Generic mechanism for defining kernel helper threads for running
- * arbitrary tasks in process context.
+ * Copyright (C) 2002 Ingo Molnar
*
- * Started by Ingo Molnar, Copyright (C) 2002
+ * Derived from the taskqueue/keventd code by:
+ * David Woodhouse <dwmw2@infradead.org>
+ * Andrew Morton
+ * Kai Petzke <wpp@marie.physik.tu-berlin.de>
+ * Theodore Ts'o <tytso@mit.edu>
*
- * Derived from the taskqueue/keventd code by:
+ * Made to use alloc_percpu by Christoph Lameter.
*
- * David Woodhouse <dwmw2@infradead.org>
- * Andrew Morton
- * Kai Petzke <wpp@marie.physik.tu-berlin.de>
- * Theodore Ts'o <tytso@mit.edu>
+ * Copyright (C) 2010 SUSE Linux Products GmbH
+ * Copyright (C) 2010 Tejun Heo <tj@kernel.org>
*
- * Made to use alloc_percpu by Christoph Lameter.
+ * This is the generic async execution mechanism. Work items as are
+ * executed in process context. The worker pool is shared and
+ * automatically managed. There is one worker pool for each CPU and
+ * one extra for works which are better served by workers which are
+ * not bound to any specific CPU.
+ *
+ * Please read Documentation/workqueue.txt for details.
*/
#include <linux/module.h>
projects / lisovros / linux_canprio.git / commitdiff