drivers/usb/phy/phy-samsung-usb2.c

   1 /* linux/drivers/usb/phy/phy-samsung-usb2.c
   2  *
   3  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
   4  *              http://www.samsung.com
   5  *
   6  * Author: Praveen Paneri <p.paneri@samsung.com>
   7  *
   8  * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
   9  * OHCI-EXYNOS controllers.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  */
  20
  21 #include <linux/module.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/clk.h>
  24 #include <linux/delay.h>
  25 #include <linux/device.h>
  26 #include <linux/err.h>
  27 #include <linux/io.h>
  28 #include <linux/of.h>
  29 #include <linux/usb/otg.h>
  30 #include <linux/usb/samsung_usb_phy.h>
  31 #include <linux/platform_data/samsung-usbphy.h>
  32
  33 #include "phy-samsung-usb.h"
  34
  35 static int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host)
  36 {
  37         if (!otg)
  38                 return -ENODEV;
  39
  40         if (!otg->host)
  41                 otg->host = host;
  42
  43         return 0;
  44 }
  45
  46 static bool exynos5_phyhost_is_on(void __iomem *regs)
  47 {
  48         u32 reg;
  49
  50         reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
  51
  52         return !(reg & HOST_CTRL0_SIDDQ);
  53 }
  54
  55 static void samsung_exynos5_usb2phy_enable(struct samsung_usbphy *sphy)
  56 {
  57         void __iomem *regs = sphy->regs;
  58         u32 phyclk = sphy->ref_clk_freq;
  59         u32 phyhost;
  60         u32 phyotg;
  61         u32 phyhsic;
  62         u32 ehcictrl;
  63         u32 ohcictrl;
  64
  65         /*
  66          * phy_usage helps in keeping usage count for phy
  67          * so that the first consumer enabling the phy is also
  68          * the last consumer to disable it.
  69          */
  70
  71         atomic_inc(&sphy->phy_usage);
  72
  73         if (exynos5_phyhost_is_on(regs)) {
  74                 dev_info(sphy->dev, "Already power on PHY\n");
  75                 return;
  76         }
  77
  78         /* Host configuration */
  79         phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
  80
  81         /* phy reference clock configuration */
  82         phyhost &= ~HOST_CTRL0_FSEL_MASK;
  83         phyhost |= HOST_CTRL0_FSEL(phyclk);
  84
  85         /* host phy reset */
  86         phyhost &= ~(HOST_CTRL0_PHYSWRST |
  87                         HOST_CTRL0_PHYSWRSTALL |
  88                         HOST_CTRL0_SIDDQ |
  89                         /* Enable normal mode of operation */
  90                         HOST_CTRL0_FORCESUSPEND |
  91                         HOST_CTRL0_FORCESLEEP);
  92
  93         /* Link reset */
  94         phyhost |= (HOST_CTRL0_LINKSWRST |
  95                         HOST_CTRL0_UTMISWRST |
  96                         /* COMMON Block configuration during suspend */
  97                         HOST_CTRL0_COMMONON_N);
  98         writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
  99         udelay(10);
 100         phyhost &= ~(HOST_CTRL0_LINKSWRST |
 101                         HOST_CTRL0_UTMISWRST);
 102         writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
 103
 104         /* OTG configuration */
 105         phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
 106
 107         /* phy reference clock configuration */
 108         phyotg &= ~OTG_SYS_FSEL_MASK;
 109         phyotg |= OTG_SYS_FSEL(phyclk);
 110
 111         /* Enable normal mode of operation */
 112         phyotg &= ~(OTG_SYS_FORCESUSPEND |
 113                         OTG_SYS_SIDDQ_UOTG |
 114                         OTG_SYS_FORCESLEEP |
 115                         OTG_SYS_REFCLKSEL_MASK |
 116                         /* COMMON Block configuration during suspend */
 117                         OTG_SYS_COMMON_ON);
 118
 119         /* OTG phy & link reset */
 120         phyotg |= (OTG_SYS_PHY0_SWRST |
 121                         OTG_SYS_LINKSWRST_UOTG |
 122                         OTG_SYS_PHYLINK_SWRESET |
 123                         OTG_SYS_OTGDISABLE |
 124                         /* Set phy refclk */
 125                         OTG_SYS_REFCLKSEL_CLKCORE);
 126
 127         writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
 128         udelay(10);
 129         phyotg &= ~(OTG_SYS_PHY0_SWRST |
 130                         OTG_SYS_LINKSWRST_UOTG |
 131                         OTG_SYS_PHYLINK_SWRESET);
 132         writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
 133
 134         /* HSIC phy configuration */
 135         phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
 136                         HSIC_CTRL_REFCLKSEL |
 137                         HSIC_CTRL_PHYSWRST);
 138         writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
 139         writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
 140         udelay(10);
 141         phyhsic &= ~HSIC_CTRL_PHYSWRST;
 142         writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
 143         writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
 144
 145         udelay(80);
 146
 147         /* enable EHCI DMA burst */
 148         ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL);
 149         ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN |
 150                                 HOST_EHCICTRL_ENAINCR4 |
 151                                 HOST_EHCICTRL_ENAINCR8 |
 152                                 HOST_EHCICTRL_ENAINCR16);
 153         writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL);
 154
 155         /* set ohci_suspend_on_n */
 156         ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL);
 157         ohcictrl |= HOST_OHCICTRL_SUSPLGCY;
 158         writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
 159 }
 160
 161 static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
 162 {
 163         void __iomem *regs = sphy->regs;
 164         u32 phypwr;
 165         u32 phyclk;
 166         u32 rstcon;
 167
 168         /* set clock frequency for PLL */
 169         phyclk = sphy->ref_clk_freq;
 170         phypwr = readl(regs + SAMSUNG_PHYPWR);
 171         rstcon = readl(regs + SAMSUNG_RSTCON);
 172
 173         switch (sphy->drv_data->cpu_type) {
 174         case TYPE_S3C64XX:
 175                 phyclk &= ~PHYCLK_COMMON_ON_N;
 176                 phypwr &= ~PHYPWR_NORMAL_MASK;
 177                 rstcon |= RSTCON_SWRST;
 178                 break;
 179         case TYPE_EXYNOS4X12:
 180                 phypwr &= ~(PHYPWR_NORMAL_MASK_HSIC0 |
 181                                 PHYPWR_NORMAL_MASK_HSIC1 |
 182                                 PHYPWR_NORMAL_MASK_PHY1);
 183                 rstcon |= RSTCON_HOSTPHY_SWRST;
 184         case TYPE_EXYNOS4210:
 185                 phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
 186                 rstcon |= RSTCON_SWRST;
 187         default:
 188                 break;
 189         }
 190
 191         writel(phyclk, regs + SAMSUNG_PHYCLK);
 192         /* Configure PHY0 for normal operation*/
 193         writel(phypwr, regs + SAMSUNG_PHYPWR);
 194         /* reset all ports of PHY and Link */
 195         writel(rstcon, regs + SAMSUNG_RSTCON);
 196         udelay(10);
 197         if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12)
 198                 rstcon &= ~RSTCON_HOSTPHY_SWRST;
 199         rstcon &= ~RSTCON_SWRST;
 200         writel(rstcon, regs + SAMSUNG_RSTCON);
 201 }
 202
 203 static void samsung_exynos5_usb2phy_disable(struct samsung_usbphy *sphy)
 204 {
 205         void __iomem *regs = sphy->regs;
 206         u32 phyhost;
 207         u32 phyotg;
 208         u32 phyhsic;
 209
 210         if (atomic_dec_return(&sphy->phy_usage) > 0) {
 211                 dev_info(sphy->dev, "still being used\n");
 212                 return;
 213         }
 214
 215         phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
 216                         HSIC_CTRL_REFCLKSEL |
 217                         HSIC_CTRL_SIDDQ |
 218                         HSIC_CTRL_FORCESLEEP |
 219                         HSIC_CTRL_FORCESUSPEND);
 220         writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
 221         writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
 222
 223         phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
 224         phyhost |= (HOST_CTRL0_SIDDQ |
 225                         HOST_CTRL0_FORCESUSPEND |
 226                         HOST_CTRL0_FORCESLEEP |
 227                         HOST_CTRL0_PHYSWRST |
 228                         HOST_CTRL0_PHYSWRSTALL);
 229         writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
 230
 231         phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
 232         phyotg |= (OTG_SYS_FORCESUSPEND |
 233                         OTG_SYS_SIDDQ_UOTG |
 234                         OTG_SYS_FORCESLEEP);
 235         writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
 236 }
 237
 238 static void samsung_usb2phy_disable(struct samsung_usbphy *sphy)
 239 {
 240         void __iomem *regs = sphy->regs;
 241         u32 phypwr;
 242
 243         phypwr = readl(regs + SAMSUNG_PHYPWR);
 244
 245         switch (sphy->drv_data->cpu_type) {
 246         case TYPE_S3C64XX:
 247                 phypwr |= PHYPWR_NORMAL_MASK;
 248                 break;
 249         case TYPE_EXYNOS4X12:
 250                 phypwr |= (PHYPWR_NORMAL_MASK_HSIC0 |
 251                                 PHYPWR_NORMAL_MASK_HSIC1 |
 252                                 PHYPWR_NORMAL_MASK_PHY1);
 253         case TYPE_EXYNOS4210:
 254                 phypwr |= PHYPWR_NORMAL_MASK_PHY0;
 255         default:
 256                 break;
 257         }
 258
 259         /* Disable analog and otg block power */
 260         writel(phypwr, regs + SAMSUNG_PHYPWR);
 261 }
 262
 263 /*
 264  * The function passed to the usb driver for phy initialization
 265  */
 266 static int samsung_usb2phy_init(struct usb_phy *phy)
 267 {
 268         struct samsung_usbphy *sphy;
 269         struct usb_bus *host = NULL;
 270         unsigned long flags;
 271         int ret = 0;
 272
 273         sphy = phy_to_sphy(phy);
 274
 275         host = phy->otg->host;
 276
 277         /* Enable the phy clock */
 278         ret = clk_prepare_enable(sphy->clk);
 279         if (ret) {
 280                 dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
 281                 return ret;
 282         }
 283
 284         spin_lock_irqsave(&sphy->lock, flags);
 285
 286         if (host) {
 287                 /* setting default phy-type for USB 2.0 */
 288                 if (!strstr(dev_name(host->controller), "ehci") ||
 289                                 !strstr(dev_name(host->controller), "ohci"))
 290                         samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
 291         } else {
 292                 samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
 293         }
 294
 295         /* Disable phy isolation */
 296         if (sphy->plat && sphy->plat->pmu_isolation)
 297                 sphy->plat->pmu_isolation(false);
 298         else if (sphy->drv_data->set_isolation)
 299                 sphy->drv_data->set_isolation(sphy, false);
 300
 301         /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
 302         samsung_usbphy_cfg_sel(sphy);
 303
 304         /* Initialize usb phy registers */
 305         sphy->drv_data->phy_enable(sphy);
 306
 307         spin_unlock_irqrestore(&sphy->lock, flags);
 308
 309         /* Disable the phy clock */
 310         clk_disable_unprepare(sphy->clk);
 311
 312         return ret;
 313 }
 314
 315 /*
 316  * The function passed to the usb driver for phy shutdown
 317  */
 318 static void samsung_usb2phy_shutdown(struct usb_phy *phy)
 319 {
 320         struct samsung_usbphy *sphy;
 321         struct usb_bus *host = NULL;
 322         unsigned long flags;
 323
 324         sphy = phy_to_sphy(phy);
 325
 326         host = phy->otg->host;
 327
 328         if (clk_prepare_enable(sphy->clk)) {
 329                 dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
 330                 return;
 331         }
 332
 333         spin_lock_irqsave(&sphy->lock, flags);
 334
 335         if (host) {
 336                 /* setting default phy-type for USB 2.0 */
 337                 if (!strstr(dev_name(host->controller), "ehci") ||
 338                                 !strstr(dev_name(host->controller), "ohci"))
 339                         samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
 340         } else {
 341                 samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
 342         }
 343
 344         /* De-initialize usb phy registers */
 345         sphy->drv_data->phy_disable(sphy);
 346
 347         /* Enable phy isolation */
 348         if (sphy->plat && sphy->plat->pmu_isolation)
 349                 sphy->plat->pmu_isolation(true);
 350         else if (sphy->drv_data->set_isolation)
 351                 sphy->drv_data->set_isolation(sphy, true);
 352
 353         spin_unlock_irqrestore(&sphy->lock, flags);
 354
 355         clk_disable_unprepare(sphy->clk);
 356 }
 357
 358 static int samsung_usb2phy_probe(struct platform_device *pdev)
 359 {
 360         struct samsung_usbphy *sphy;
 361         struct usb_otg *otg;
 362         struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
 363         const struct samsung_usbphy_drvdata *drv_data;
 364         struct device *dev = &pdev->dev;
 365         struct resource *phy_mem;
 366         void __iomem    *phy_base;
 367         struct clk *clk;
 368         int ret;
 369
 370         phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 371         phy_base = devm_ioremap_resource(dev, phy_mem);
 372         if (IS_ERR(phy_base))
 373                 return PTR_ERR(phy_base);
 374
 375         sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
 376         if (!sphy)
 377                 return -ENOMEM;
 378
 379         otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
 380         if (!otg)
 381                 return -ENOMEM;
 382
 383         drv_data = samsung_usbphy_get_driver_data(pdev);
 384
 385         if (drv_data->cpu_type == TYPE_EXYNOS5250)
 386                 clk = devm_clk_get(dev, "usbhost");
 387         else
 388                 clk = devm_clk_get(dev, "otg");
 389
 390         if (IS_ERR(clk)) {
 391                 dev_err(dev, "Failed to get otg clock\n");
 392                 return PTR_ERR(clk);
 393         }
 394
 395         sphy->dev = dev;
 396
 397         if (dev->of_node) {
 398                 ret = samsung_usbphy_parse_dt(sphy);
 399                 if (ret < 0)
 400                         return ret;
 401         } else {
 402                 if (!pdata) {
 403                         dev_err(dev, "no platform data specified\n");
 404                         return -EINVAL;
 405                 }
 406         }
 407
 408         sphy->plat              = pdata;
 409         sphy->regs              = phy_base;
 410         sphy->clk               = clk;
 411         sphy->drv_data          = drv_data;
 412         sphy->phy.dev           = sphy->dev;
 413         sphy->phy.label         = "samsung-usb2phy";
 414         sphy->phy.init          = samsung_usb2phy_init;
 415         sphy->phy.shutdown      = samsung_usb2phy_shutdown;
 416
 417         sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
 418         if (sphy->ref_clk_freq < 0)
 419                 return -EINVAL;
 420
 421         sphy->phy.otg           = otg;
 422         sphy->phy.otg->phy      = &sphy->phy;
 423         sphy->phy.otg->set_host = samsung_usbphy_set_host;
 424
 425         spin_lock_init(&sphy->lock);
 426
 427         platform_set_drvdata(pdev, sphy);
 428
 429         return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
 430 }
 431
 432 static int samsung_usb2phy_remove(struct platform_device *pdev)
 433 {
 434         struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
 435
 436         usb_remove_phy(&sphy->phy);
 437
 438         if (sphy->pmuregs)
 439                 iounmap(sphy->pmuregs);
 440         if (sphy->sysreg)
 441                 iounmap(sphy->sysreg);
 442
 443         return 0;
 444 }
 445
 446 static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = {
 447         .cpu_type               = TYPE_S3C64XX,
 448         .devphy_en_mask         = S3C64XX_USBPHY_ENABLE,
 449         .rate_to_clksel         = samsung_usbphy_rate_to_clksel_64xx,
 450         .set_isolation          = NULL, /* TODO */
 451         .phy_enable             = samsung_usb2phy_enable,
 452         .phy_disable            = samsung_usb2phy_disable,
 453 };
 454
 455 static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
 456         .cpu_type               = TYPE_EXYNOS4210,
 457         .devphy_en_mask         = EXYNOS_USBPHY_ENABLE,
 458         .hostphy_en_mask        = EXYNOS_USBPHY_ENABLE,
 459         .rate_to_clksel         = samsung_usbphy_rate_to_clksel_64xx,
 460         .set_isolation          = samsung_usbphy_set_isolation_4210,
 461         .phy_enable             = samsung_usb2phy_enable,
 462         .phy_disable            = samsung_usb2phy_disable,
 463 };
 464
 465 static const struct samsung_usbphy_drvdata usb2phy_exynos4x12 = {
 466         .cpu_type               = TYPE_EXYNOS4X12,
 467         .devphy_en_mask         = EXYNOS_USBPHY_ENABLE,
 468         .hostphy_en_mask        = EXYNOS_USBPHY_ENABLE,
 469         .rate_to_clksel         = samsung_usbphy_rate_to_clksel_4x12,
 470         .set_isolation          = samsung_usbphy_set_isolation_4210,
 471         .phy_enable             = samsung_usb2phy_enable,
 472         .phy_disable            = samsung_usb2phy_disable,
 473 };
 474
 475 static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
 476         .cpu_type               = TYPE_EXYNOS5250,
 477         .hostphy_en_mask        = EXYNOS_USBPHY_ENABLE,
 478         .hostphy_reg_offset     = EXYNOS_USBHOST_PHY_CTRL_OFFSET,
 479         .rate_to_clksel         = samsung_usbphy_rate_to_clksel_4x12,
 480         .set_isolation          = samsung_usbphy_set_isolation_4210,
 481         .phy_enable             = samsung_exynos5_usb2phy_enable,
 482         .phy_disable            = samsung_exynos5_usb2phy_disable,
 483 };
 484
 485 #ifdef CONFIG_OF
 486 static const struct of_device_id samsung_usbphy_dt_match[] = {
 487         {
 488                 .compatible = "samsung,s3c64xx-usb2phy",
 489                 .data = &usb2phy_s3c64xx,
 490         }, {
 491                 .compatible = "samsung,exynos4210-usb2phy",
 492                 .data = &usb2phy_exynos4,
 493         }, {
 494                 .compatible = "samsung,exynos4x12-usb2phy",
 495                 .data = &usb2phy_exynos4x12,
 496         }, {
 497                 .compatible = "samsung,exynos5250-usb2phy",
 498                 .data = &usb2phy_exynos5
 499         },
 500         {},
 501 };
 502 MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
 503 #endif
 504
 505 static struct platform_device_id samsung_usbphy_driver_ids[] = {
 506         {
 507                 .name           = "s3c64xx-usb2phy",
 508                 .driver_data    = (unsigned long)&usb2phy_s3c64xx,
 509         }, {
 510                 .name           = "exynos4210-usb2phy",
 511                 .driver_data    = (unsigned long)&usb2phy_exynos4,
 512         }, {
 513                 .name           = "exynos4x12-usb2phy",
 514                 .driver_data    = (unsigned long)&usb2phy_exynos4x12,
 515         }, {
 516                 .name           = "exynos5250-usb2phy",
 517                 .driver_data    = (unsigned long)&usb2phy_exynos5,
 518         },
 519         {},
 520 };
 521
 522 MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
 523
 524 static struct platform_driver samsung_usb2phy_driver = {
 525         .probe          = samsung_usb2phy_probe,
 526         .remove         = samsung_usb2phy_remove,
 527         .id_table       = samsung_usbphy_driver_ids,
 528         .driver         = {
 529                 .name   = "samsung-usb2phy",
 530                 .owner  = THIS_MODULE,
 531                 .of_match_table = of_match_ptr(samsung_usbphy_dt_match),
 532         },
 533 };
 534
 535 module_platform_driver(samsung_usb2phy_driver);
 536
 537 MODULE_DESCRIPTION("Samsung USB 2.0 phy controller");
 538 MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
 539 MODULE_LICENSE("GPL");
 540 MODULE_ALIAS("platform:samsung-usb2phy");