-/* setup.c
- * Linux CAN-bus device driver.
- * Written by Arnaud Westenberg email:arnaud@wanadoo.nl
- * Rewritten for new CAN queues by Pavel Pisa - OCERA team member
- * email:pisa@cmp.felk.cvut.cz
- * This software is released under the GPL-License.
- * Version lincan-0.3 17 Jun 2004
- */
+/**************************************************************************/
+/* File: setup.c - CAN driver and chips setup code */
+/* */
+/* LinCAN - (Not only) Linux CAN bus driver */
+/* Copyright (C) 2002-2009 DCE FEE CTU Prague <http://dce.felk.cvut.cz> */
+/* Copyright (C) 2002-2009 Pavel Pisa <pisa@cmp.felk.cvut.cz> */
+/* Funded by OCERA and FRESCOR IST projects */
+/* Based on CAN driver code by Arnaud Westenberg <arnaud@wanadoo.nl> */
+/* */
+/* LinCAN is free software; you can redistribute it and/or modify it */
+/* under terms of the GNU General Public License as published by the */
+/* Free Software Foundation; either version 2, or (at your option) any */
+/* later version. LinCAN is distributed in the hope that it will be */
+/* useful, but WITHOUT ANY WARRANTY; without even the implied warranty */
+/* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU */
+/* General Public License for more details. You should have received a */
+/* copy of the GNU General Public License along with LinCAN; see file */
+/* COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, */
+/* Cambridge, MA 02139, USA. */
+/* */
+/* To allow use of LinCAN in the compact embedded systems firmware */
+/* and RT-executives (RTEMS for example), main authors agree with next */
+/* special exception: */
+/* */
+/* Including LinCAN header files in a file, instantiating LinCAN generics */
+/* or templates, or linking other files with LinCAN objects to produce */
+/* an application image/executable, does not by itself cause the */
+/* resulting application image/executable to be covered by */
+/* the GNU General Public License. */
+/* This exception does not however invalidate any other reasons */
+/* why the executable file might be covered by the GNU Public License. */
+/* Publication of enhanced or derived LinCAN files is required although. */
+/**************************************************************************/
#include "../include/can.h"
#include "../include/can_sysdep.h"
* This function is prepared to simplify board specific xxx_request_io() function
* for memory mapped devices.
*/
-int can_base_addr_fixup(struct candevice_t *candev, unsigned long new_base)
+int can_base_addr_fixup(struct candevice_t *candev, can_ioptr_t new_base)
{
- unsigned long offs;
+ long offs;
int i, j;
-
+
offs=new_base-candev->dev_base_addr;
candev->dev_base_addr=new_base;
for(i=0;i<candev->nr_all_chips;i++){
/**
* can_check_dev_taken - checks if bus device description is already taken by driver
- * @anydev: pointer to bus specific Linux device description
+ * @anydev: pointer to bus specific Linux device description
*
* Returns: Returns 1 if device is already used by LinCAN driver, 0 otherwise.
*/
if(boarddev == anydev)
return 1;
}
-
+
return 0;
}
{
static int next_minor=0;
int i;
-
+
if(minorbase>=0)
next_minor=minorbase;
if(next_minor>=MAX_TOT_MSGOBJS)
{
static int next_chip_slot=0;
int i;
-
+
if(next_chip_slot>=MAX_TOT_CHIPS)
next_chip_slot=0;
i=next_chip_slot;
* @irq_param_idx_p: pointer to the index into arrays of the per CAN channel IRQ parameters
*
* The function builds representation of the one board from parameters provided
- * in the module parameters arrays:
+ * in the module parameters arrays:
* @hw[card] .. hardware type,
* @io[card] .. base IO address,
* @baudrate[chan_param_idx] .. per channel baudrate,
* The indexes are advanced after consumed parameters if the registration is successful.
*
* The hardware specific operations of the device/board are initialized by call to
- * init_hwspecops() function. Then board data are initialized by board specific
+ * init_hwspecops() function. Then board data are initialized by board specific
* init_hw_data() function. Then chips and objects representation is build by
* init_chip_struct() function. If all above steps are successful, chips and
- * message objects are registered into global arrays.
+ * message objects are registered into global arrays.
*
* Return Value: returns negative number in the case of fail
*/
long bd;
int irqsig=-1;
long clock;
-
+
candev=(struct candevice_t *)can_checked_malloc(sizeof(struct candevice_t));
if (candev==NULL)
return -ENOMEM;
if(chipnr<irqnum)
irqsig=irq[*irq_param_idx_p+chipnr];
-
+
bd=baudrate[*chan_param_idx_p+chipnr];
if(!bd) bd=baudrate[0];
-
+
if ((ret=init_chip_struct(candev, chipnr, irqsig, bd*1000, clock*1000)))
goto error_chip;
}
-
+
for (chipnr=0; chipnr < candev->nr_all_chips; chipnr++) {
int objnr;
register_chip_struct(chip, m);
-
+
for (objnr=0; objnr<chip->max_objects; objnr++) {
register_obj_struct(chip->msgobj[objnr], m);
if(m>=0) m++;
hardware_p->candevice[card]=NULL;
can_checked_free(candev);
return ret;
-
+
}
/**
* @baudrate: baudrate in the units of 1Bd
* @clock: optional chip base clock frequency in 1Hz step
*
- * Chip structure is allocated and chip specific operations are filled by
+ * Chip structure is allocated and chip specific operations are filled by
* call to board specific init_chip_data() which calls chip specific
- * fill_chipspecops(). The message objects are generated by
+ * fill_chipspecops(). The message objects are generated by
* calls to init_obj_struct() function.
*
* Return Value: returns negative number in the case of fail
obj=(struct msgobj_t *)can_checked_malloc(sizeof(struct msgobj_t));
hostchip->msgobj[objnr]=obj;
- if (obj == NULL)
+ if (obj == NULL)
return -ENOMEM;
memset(obj, 0, sizeof(struct msgobj_t));
ret=candev->hwspecops->init_obj_data(hostchip,objnr);
if(ret<0) return ret;
-
+
return 0;
}
int init_hwspecops(struct candevice_t *candev, int *irqnum_p)
{
const struct boardtype_t *brp;
-
+
brp = boardtype_find(candev->hwname);
-
+
if(!brp) {
CANMSG("Sorry, hardware \"%s\" is currently not supported.\n",candev->hwname);
return -EINVAL;
}
-
+
if(irqnum_p)
*irqnum_p=brp->irqnum;
brp->board_register(candev->hwspecops);