Included ARM LPC21xx related code from uLan project. The snapshot date is 2008-07-05

[lincan.git] / embedded / board / arm / ul_usb1 / config / config.u2uv2

diff --git a/embedded/board/arm/ul_usb1/config/config.u2uv2 b/embedded/board/arm/ul_usb1/config/config.u2uv2
new file mode 100644 (file)
index 0000000..6deb39e
--- /dev/null
+++ b/embedded/board/arm/ul_usb1/config/config.u2uv2
@@ -0,0 +1,58 @@
+# -*- makefile -*-
+
+ARCH=arm
+MACH=lpc21xx
+BOARD=ul_usb1
+
+CONFIG_OC_UL_DRV_SYSLESS=y
+CONFIG_OC_UL_DRV_U450_VARPINS=y
+CONFIG_OC_UL_DRV_U450_VARPINS_MSRSWAP=y
+CONFIG_OC_UL_DRV_U450_TMELATE=y
+#CONFIG_ULAN_DY=y
+#CONFIG_ULOI_LT=y
+#CONFIG_ULOI_GENOBJIDTAG=y
+#CONFIG_KEYVAL=y
+CONFIG_USB_BASE=y
+CONFIG_USB_LPCUSB=y
+CONFIG_APP_U2U_V2=y
+
+#CONFIG_APP_TEST_LPC=y
+#CONFIG_APP_ULAD31=y
+#CONFIG_ULBOOT=y
+
+CONFIG_STDIO_COM_PORT=0
+
+CROSS_COMPILE = arm-elf-
+TARGET_ARCH = -mcpu=arm7tdmi 
+
+# Set default C flags. If theese are set elsewhere (e.g. on a command
+# line), these default flags are not used.
+DEBUG ?= -g
+OPTIMIZE ?= -O2
+
+LPC_BAUD = 38400
+TOLPC = tolpc --baud $(LPC_BAUD) --sdev /dev/ttyS0
+LOAD_CMD-ramisp = $(TOLPC)  -v -q 7372 -L -f 
+LOAD_CMD-boot = lpc21isp -bin /dev/ttyUSB0 $(LPC_BAUD) 12000
+
+# This selects linker script
+LD_SCRIPT=lpc2148
+#DEFAULT_LD_SCRIPT_VARIANT=boot
+
+#OUTPUT_FORMATS = bin hex srec
+
+OUTPUT_FORMATS = bin
+
+PROG_BASE=0x20000
+PROG_SIZE=0x20000
+
+UL_SENDHEX ?= ul_sendhex
+MOD ?= 3
+
+LOAD_CMD-app = \
+    $(UL_SENDHEX) -m $(MOD) -r -o 0 ; \
+    $(UL_SENDHEX) -m $(MOD) -o 0 -t 0x101 -s $(PROG_BASE) -l $(PROG_SIZE) -e; \
+    $(UL_SENDHEX) -m $(MOD) -o 0 -t 0x101 -b 256 -s $(PROG_BASE) -f binary
+
+RUN_CMD-app = \
+    $(UL_SENDHEX) -m $(MOD) -g $(PROG_BASE)