-/* unican.c
- * Linux CAN-bus device driver.
- * Written for new CAN driver version by Pavel Pisa - OCERA team member
- * email:pisa@cmp.felk.cvut.cz
- * This software is released under the GPL-License.
- * Version lincan-0.3 17 Jun 2004
- */
+/**************************************************************************/
+/* File: unican.c - Unicontrols PCAN,PCAN-PCI, VCAN boards support */
+/* */
+/* LinCAN - (Not only) Linux CAN bus driver */
+/* Copyright (C) 2002-2009 DCE FEE CTU Prague <http://dce.felk.cvut.cz> */
+/* Copyright (C) 2002-2009 Pavel Pisa <pisa@cmp.felk.cvut.cz> */
+/* Funded by OCERA and FRESCOR IST projects */
+/* Based on CAN driver code by Arnaud Westenberg <arnaud@wanadoo.nl> */
+/* */
+/* LinCAN is free software; you can redistribute it and/or modify it */
+/* under terms of the GNU General Public License as published by the */
+/* Free Software Foundation; either version 2, or (at your option) any */
+/* later version. LinCAN is distributed in the hope that it will be */
+/* useful, but WITHOUT ANY WARRANTY; without even the implied warranty */
+/* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU */
+/* General Public License for more details. You should have received a */
+/* copy of the GNU General Public License along with LinCAN; see file */
+/* COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, */
+/* Cambridge, MA 02139, USA. */
+/* */
+/* To allow use of LinCAN in the compact embedded systems firmware */
+/* and RT-executives (RTEMS for example), main authors agree with next */
+/* special exception: */
+/* */
+/* Including LinCAN header files in a file, instantiating LinCAN generics */
+/* or templates, or linking other files with LinCAN objects to produce */
+/* an application image/executable, does not by itself cause the */
+/* resulting application image/executable to be covered by */
+/* the GNU General Public License. */
+/* This exception does not however invalidate any other reasons */
+/* why the executable file might be covered by the GNU Public License. */
+/* Publication of enhanced or derived LinCAN files is required although. */
+/**************************************************************************/
#include "../include/can.h"
#include "../include/can_sysdep.h"
}
-
-long unican_bus_latency(struct msgobj_t *obj)
-{
- long latency;
- latency=obj->hostchip->baudrate;
- if(latency){
- latency=(long)HZ*1000/latency;
- }
- return latency;
-}
-
-
/* * * unican Chip Functionality * * */
int unican_enable_configuration(struct canchip_t *chip)
return 0;
}
+/**
+ * unican_attach_to_chip: - attaches to the chip, setups registers and state
+ * @chip: pointer to chip state structure
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int unican_attach_to_chip(struct canchip_t *chip)
+{
+ return 0;
+}
+
+/**
+ * unican_release_chip: - called before chip structure removal if %CHIP_ATTACHED is set
+ * @chip: pointer to chip state structure
+ *
+ * Return Value: negative value reports error.
+ * File: src/sja1000p.c
+ */
+int unican_release_chip(struct canchip_t *chip)
+{
+ sCAN_CARD *chipext = (sCAN_CARD *)chip->chip_data;
+
+ unican_stop_chip(chip);
+ cl2_clear_interrupt(chipext);
+
+ return 0;
+}
/**
* unican_remote_request: - configures message object and asks for RTR message
*/
int unican_request_io(struct candevice_t *candev)
{
- unsigned long remap_addr;
+ can_ioptr_t remap_addr;
if (!can_request_mem_region(candev->io_addr,IO_RANGE,DEVICE_NAME " - unican")) {
CANMSG("Unable to request IO-memory: 0x%lx\n",candev->io_addr);
return -ENODEV;
}
- if ( !( remap_addr = (long) ioremap( candev->io_addr, IO_RANGE ) ) ) {
+ if ( !( remap_addr = ioremap( candev->io_addr, IO_RANGE ) ) ) {
CANMSG("Unable to access I/O memory at: 0x%lx\n", candev->io_addr);
can_release_mem_region(candev->io_addr,IO_RANGE);
return -ENODEV;
*/
int unican_release_io(struct candevice_t *candev)
{
- iounmap((void*)candev->dev_base_addr);
+ iounmap(candev->dev_base_addr);
can_release_mem_region(candev->io_addr,IO_RANGE);
return 0;
}
chip->int_clk_reg = 0x0;
chip->int_bus_reg = 0x0;
chip->max_objects = 1;
- chip->chip_base_addr=candev->io_addr;
+ chip->chip_base_addr=candev->dev_base_addr;
CANMSG("initializing unican chip operations\n");
chip->chipspecops->chip_config=unican_chip_config;
chip->chipspecops->enable_configuration=unican_enable_configuration;
chip->chipspecops->disable_configuration=unican_disable_configuration;
chip->chipspecops->set_btregs=unican_set_btregs;
+ chip->chipspecops->attach_to_chip=unican_attach_to_chip;
+ chip->chipspecops->release_chip=unican_release_chip;
chip->chipspecops->start_chip=unican_start_chip;
chip->chipspecops->stop_chip=unican_stop_chip;
chip->chipspecops->irq_handler=unican_irq_handler;
int unican_pci_request_io(struct candevice_t *candev)
{
- unsigned long remap_addr;
+ can_ioptr_t remap_addr;
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,21))
if(pci_request_region(candev->sysdevptr.pcidev, 0, "unican_pci") != 0){
}
#endif /*(LINUX_VERSION_CODE > KERNEL_VERSION(2,4,21))*/
- candev->dev_base_addr=pci_resource_start(candev->sysdevptr.pcidev,0);
- candev->io_addr=candev->dev_base_addr;
- candev->res_addr=candev->dev_base_addr;
+ candev->io_addr=pci_resource_start(candev->sysdevptr.pcidev,0);
+ candev->res_addr=candev->io_addr;
- if ( !( remap_addr = (long) ioremap( candev->io_addr, IO_RANGE ) ) ) {
+ if ( !( remap_addr = ioremap( candev->io_addr, IO_RANGE ) ) ) {
CANMSG("Unable to access I/O memory at: 0x%lx\n", candev->io_addr);
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,21))
pci_release_region(candev->sysdevptr.pcidev, 0);
can_base_addr_fixup(candev, remap_addr);
DEBUGMSG("Registered IO-memory: 0x%lx - 0x%lx\n", candev->io_addr, candev->io_addr + IO_RANGE - 1);
DEBUGMSG("VMA: dev_base_addr: 0x%lx chip_base_addr: 0x%lx\n",
- candev->dev_base_addr, candev->chip[0]->chip_base_addr);
+ can_ioptr2ulong(candev->dev_base_addr),
+ can_ioptr2ulong(candev->chip[0]->chip_base_addr));
return 0;
}
int unican_pci_release_io(struct candevice_t *candev)
{
- iounmap((void*)candev->dev_base_addr);
+ iounmap(candev->dev_base_addr);
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,21))
pci_release_region(candev->sysdevptr.pcidev, 0);
#else /*(LINUX_VERSION_CODE > KERNEL_VERSION(2,4,21))*/
{
struct pci_dev *pcidev = NULL;
- do {
- pcidev = pci_find_device(UNICAN_PCI_VENDOR, UNICAN_PCI_ID, pcidev);
- if(pcidev == NULL) return -ENODEV;
- } while(can_check_dev_taken(pcidev));
-
+ pcidev = can_pci_get_next_untaken_device(UNICAN_PCI_VENDOR, UNICAN_PCI_ID);
+ if(pcidev == NULL)
+ return -ENODEV;
+
if (pci_enable_device (pcidev)){
printk(KERN_CRIT "Setup of Unican PCI failed\n");
+ can_pci_dev_put(pcidev);
return -EIO;
}
candev->sysdevptr.pcidev=pcidev;
if(!(pci_resource_flags(pcidev,0)&IORESOURCE_MEM)){
printk(KERN_CRIT "Unican PCI region 0 is not MEM\n");
+ can_pci_dev_put(pcidev);
return -EIO;
}
- candev->dev_base_addr=pci_resource_start(pcidev,0);
- candev->io_addr=candev->dev_base_addr;
- candev->res_addr=candev->dev_base_addr;
+ candev->io_addr=pci_resource_start(pcidev,0);
+ candev->res_addr=candev->io_addr;
+ candev->dev_base_addr=NULL;
/*candev->flags |= CANDEV_PROGRAMMABLE_IRQ;*/
return 0;
}
+void unican_pci_done_hw_data(struct candevice_t *candev)
+{
+ struct pci_dev *pcidev = candev->sysdevptr.pcidev;
+ can_pci_dev_put(pcidev);
+}
int unican_pci_init_chip_data(struct candevice_t *candev, int chipnr)
{
hwspecops->release_io = unican_pci_release_io;
hwspecops->reset = unican_reset;
hwspecops->init_hw_data = unican_pci_init_hw_data;
+ hwspecops->done_hw_data = unican_pci_done_hw_data;
hwspecops->init_chip_data = unican_pci_init_chip_data;
hwspecops->init_obj_data = unican_init_obj_data;
hwspecops->write_register = NULL;
projects / lincan.git / blobdiff