* Rewritten for new CAN queues by Pavel Pisa - OCERA team member
* email:pisa@cmp.felk.cvut.cz
* This software is released under the GPL-License.
- * Version lincan-0.2 9 Jul 2003
+ * Version lincan-0.3 17 Jun 2004
*/
-#ifdef __CONSTANTS_H__
-#else
+#ifndef __CONSTANTS_H__
#define __CONSTANTS_H__
/* Device name as it will appear in /proc/devices */
#define DEVICE_NAME "can"
+/* Branch of the driver */
+#define CAN_DRV_BRANCH (('L'<<24)|('I'<<16)|('N'<<8)|'C')
+
+/* Version of the driver */
+#define CAN_DRV_VER_MAJOR 0
+#define CAN_DRV_VER_MINOR 3
+#define CAN_DRV_VER_PATCH 0
+#define CAN_DRV_VER ((CAN_DRV_VER_MAJOR<<16) | (CAN_DRV_VER_MINOR<<8) | CAN_DRV_VER_PATCH)
+
/* Default driver major number, see /usr/src/linux/Documentation/devices.txt */
#define CAN_MAJOR 91
-/* Timeout in jiffies before the system calls return with an error */
-#define CANTIMEOUT (4*HZ)
-
/* Definition of the maximum number of concurrent supported hardware boards,
* chips per board, total number of chips, interrupts and message objects.
* Obviously there are no 32 different interrupts, but each chip can have its
#define MAX_TOT_CHIPS (MAX_HW_CHIPS*MAX_HW_CARDS)
#define MAX_TOT_CHIPS_STR 32 /* must be explicit for MODULE_PARM */
#define MAX_IRQ 32
-#define MAX_MSGOBJS 15
+#define MAX_MSGOBJS 32
#define MAX_TOT_MSGOBJS (MAX_TOT_CHIPS*MAX_MSGOBJS)
#define MAX_BUF_LENGTH 64
//#define MAX_BUF_LENGTH 4
#define MSGOBJ_TX_LOCK_b 2
#define MSGOBJ_IRQ_REQUEST_b 3
#define MSGOBJ_WORKER_WAKE_b 4
+#define MSGOBJ_FILTCH_REQUEST_b 5
+#define MSGOBJ_RX_MODE_b 6
+#define MSGOBJ_RX_MODE_EXT_b 7
#define MSGOBJ_OPENED (1<<MSGOBJ_OPENED_b)
#define MSGOBJ_TX_REQUEST (1<<MSGOBJ_TX_REQUEST_b)
#define MSGOBJ_TX_LOCK (1<<MSGOBJ_TX_LOCK_b)
#define MSGOBJ_IRQ_REQUEST (1<<MSGOBJ_IRQ_REQUEST_b)
#define MSGOBJ_WORKER_WAKE (1<<MSGOBJ_WORKER_WAKE_b)
+#define MSGOBJ_FILTCH_REQUEST (1<<MSGOBJ_FILTCH_REQUEST_b)
+#define MSGOBJ_RX_MODE (1<<MSGOBJ_RX_MODE_b)
+#define MSGOBJ_RX_MODE_EXT (1<<MSGOBJ_RX_MODE_EXT_b)
#define can_msgobj_test_fl(obj,obj_fl) \
test_bit(MSGOBJ_##obj_fl##_b,&(obj)->obj_flags)
test_and_clear_bit(MSGOBJ_##obj_fl##_b,&(obj)->obj_flags)
-/* These flags can be used for the chip_t structure flags data entry */
-#define CHIP_CONFIGURED (1<<0)
-#define CHIP_SEGMENTED (1<<1)
-#define CHIP_IRQ_SETUP (1<<2)
+/* These flags can be used for the canchip_t structure flags data entry */
+#define CHIP_ATTACHED (1<<0) /* chip is attached to HW, release_chip() has to be called */
+#define CHIP_CONFIGURED (1<<1) /* chip is configured and prepared for communication */
+#define CHIP_SEGMENTED (1<<2) /* segmented access, ex: i82527 with 16 byte window*/
+#define CHIP_IRQ_SETUP (1<<3) /* IRQ handler has been set */
+#define CHIP_IRQ_PCI (1<<4) /* chip is on PCI board and uses PCI interrupt */
+#define CHIP_IRQ_VME (1<<5) /* interrupt is VME bus and requires VME bridge */
+#define CHIP_IRQ_CUSTOM (1<<6) /* custom interrupt provided by board or chip code */
+#define CHIP_IRQ_FAST (1<<7) /* interrupt handler only schedules postponed processing */
+
+#define CHIP_MAX_IRQLOOP 1000
+
+/* System independent defines of IRQ handled state */
+#define CANCHIP_IRQ_NONE 0
+#define CANCHIP_IRQ_HANDLED 1
+#define CANCHIP_IRQ_ACCEPTED 2
+#define CANCHIP_IRQ_STUCK 3
/* These flags can be used for the candevices_t structure flags data entry */
#define CANDEV_PROGRAMMABLE_IRQ (1<<0)