* Rewritten for new CAN queues by Pavel Pisa - OCERA team member
* email:pisa@cmp.felk.cvut.cz
* This software is released under the GPL-License.
- * Version lincan-0.2 9 Jul 2003
+ * Version lincan-0.3 17 Jun 2004
*/
#include "./can.h"
* @chip: array of pointers to the chip structures
* @hwspecops: pointer to board specific operations
* @hosthardware_p: pointer to the root hardware structure
+ * @sysdevptr: union reserved for pointer to bus specific
+ * device structure (case @pcidev is used for PCI devices)
*
* The structure represent configuration and state of associated board.
* The driver infrastructure prepares this structure and calls
struct hwspecops_t *hwspecops;
struct canhardware_t *hosthardware_p;
+
+ union {
+ void *anydev;
+ #ifdef CAN_ENABLE_PCI_SUPPORT
+ struct pci_dev *pcidev;
+ #endif /*CAN_ENABLE_PCI_SUPPORT*/
+ } sysdevptr;
+
};
/**
* %CHIP_SEGMENTED .. access to the chip is segmented (mainly for i82527 chips)
* @clock: chip base clock frequency in Hz
* @baudrate: selected chip baudrate in Hz
- * @write_register: write chip register function copy -
+ * @write_register: write chip register function copy
* @read_register: read chip register function copy
+ * @chip_data: pointer for optional chip specific data extension
* @sja_cdr_reg: SJA specific register -
* holds hardware specific options for the Clock Divider
* register. Options defined in the sja1000.h file:
* @chipspecops: pointer to the set of chip specific object filled by init_chip_data() function
* @hostdevice: pointer to chip hosting board
* @max_objects: maximal number of communication objects connected to this chip
+ * @chip_lock: reserved for synchronization of the chip supporting routines
+ * (not used in the current driver version)
+ * @worker_thread: chip worker thread ID (RT-Linux specific field)
+ * @pend_flags: holds information about pending interrupt and tx_wake() operations
+ * (RT-Linux specific field). Masks values:
+ * %MSGOBJ_TX_REQUEST .. some of the message objects requires tx_wake() call,
+ * %MSGOBJ_IRQ_REQUEST .. chip interrupt processing required
+ * %MSGOBJ_WORKER_WAKE .. marks, that worker thread should be waked
+ * for some of above reasons
*
* The fields @write_register and @read_register are copied from
* corresponding fields from @hwspecops structure
long clock; /* Chip clock in Hz */
long baudrate;
- void (*write_register)(unsigned char data,unsigned long address);
+ void (*write_register)(unsigned data,unsigned long address);
unsigned (*read_register)(unsigned long address);
-
+
+ void *chip_data;
+
unsigned short sja_cdr_reg; /* sja1000 only! */
unsigned short sja_ocr_reg; /* sja1000 only! */
unsigned short int_cpu_reg; /* intel 82527 only! */
* @obj_used: counter of users (associated file structures for Linux
* userspace clients) of this object
* @obj_users: list of user structures of type &canuser_t.
+ * @obj_flags: message object specific flags. Masks values:
+ * %MSGOBJ_TX_REQUEST .. the message object requests TX activation
+ * %MSGOBJ_TX_LOCK .. some IRQ routine or callback on some CPU
+ * is running inside TX activation processing code
+ * @rx_preconfig_id: place to store RX message identifier for some chip types
+ * that reuse same object for TX
*/
struct msgobj_t {
unsigned long obj_base_addr;
struct canmsg_t rx_msg;
struct chip_t *hostchip;
+
+ unsigned long rx_preconfig_id;
atomic_t obj_used;
struct list_head obj_users;
int (*init_chip_data)(struct candevice_t *candev, int chipnr);
int (*init_obj_data)(struct chip_t *chip, int objnr);
int (*program_irq)(struct candevice_t *candev);
- void (*write_register)(unsigned char data,unsigned long address);
+ void (*write_register)(unsigned data,unsigned long address);
unsigned (*read_register)(unsigned long address);
};
* @remote_request: configures message object and asks for RTR message
* @check_tx_stat: checks state of transmission engine
* @wakeup_tx: wakeup TX processing
+ * @filtch_rq: optional routine for propagation of outgoing edges filters to HW
* @enable_configuration: enable chip configuration mode
* @disable_configuration: disable chip configuration mode
* @set_btregs: configures bitrate registers
int (*remote_request)(struct chip_t *chip, struct msgobj_t *obj);
int (*check_tx_stat)(struct chip_t *chip);
int (*wakeup_tx)(struct chip_t *chip, struct msgobj_t *obj);
+ int (*filtch_rq)(struct chip_t *chip, struct msgobj_t *obj);
int (*enable_configuration)(struct chip_t *chip);
int (*disable_configuration)(struct chip_t *chip);
int (*set_btregs)(struct chip_t *chip, unsigned short btr0,
unsigned short btr1);
int (*start_chip)(struct chip_t *chip);
int (*stop_chip)(struct chip_t *chip);
- can_irqreturn_t (*irq_handler)(int irq, void *dev_id, struct pt_regs *regs);
+ int (*irq_handler)(int irq, struct chip_t *chip);
};
struct mem_addr {
extern struct mem_addr *mem_head;
+
+#if defined(CONFIG_OC_LINCAN_PORTIO_ONLY)
+extern inline void can_write_reg(const struct chip_t *chip, unsigned char data, unsigned address)
+{
+ outb(data, chip->chip_base_addr+address);
+}
+extern inline unsigned can_read_reg(const struct chip_t *chip, unsigned address)
+{
+ return inb(chip->chip_base_addr+address);
+}
+extern inline void canobj_write_reg(const struct chip_t *chip, const struct msgobj_t *obj,
+ unsigned char data, unsigned address)
+{
+ outb(data, obj->obj_base_addr+address);
+}
+extern inline unsigned canobj_read_reg(const struct chip_t *chip, const struct msgobj_t *obj,
+ unsigned address)
+{
+ return inb(obj->obj_base_addr+address);
+}
+
+#elif defined(CONFIG_OC_LINCAN_MEMIO_ONLY)
+extern inline void can_write_reg(const struct chip_t *chip, unsigned char data, unsigned address)
+{
+ writeb(data, chip->chip_base_addr+address);
+}
+extern inline unsigned can_read_reg(const struct chip_t *chip, unsigned address)
+{
+ return readb(chip->chip_base_addr+address);
+}
+extern inline void canobj_write_reg(const struct chip_t *chip, const struct msgobj_t *obj,
+ unsigned char data, unsigned address)
+{
+ writeb(data, obj->obj_base_addr+address);
+}
+extern inline unsigned canobj_read_reg(const struct chip_t *chip, const struct msgobj_t *obj,
+ unsigned address)
+{
+ return readb(obj->obj_base_addr+address);
+}
+
+#else /*CONFIG_OC_LINCAN_DYNAMICIO*/
+#ifndef CONFIG_OC_LINCAN_DYNAMICIO
+#define CONFIG_OC_LINCAN_DYNAMICIO
+#endif
+
/* Inline function to write to the hardware registers. The argument address is
* relative to the memory map of the chip and not the absolute memory address.
*/
return chip->read_register(address_to_read);
}
+#endif /*CONFIG_OC_LINCAN_DYNAMICIO*/
+
int can_base_addr_fixup(struct candevice_t *candev, unsigned long new_base);
int can_request_io_region(unsigned long start, unsigned long n, const char *name);
void can_release_io_region(unsigned long start, unsigned long n);
};
const struct boardtype_t* boardtype_find(const char *str);
+
+int can_check_dev_taken(void *anydev);
+
+#if defined(can_gettimeofday) && defined(CAN_MSG_VERSION_2) && 1
+static inline
+void can_filltimestamp(canmsg_tstamp_t *ptimestamp)
+{
+ can_gettimeofday(ptimestamp);
+}
+#else /* No timestamp support, set field to zero */
+static inline
+void can_filltimestamp(canmsg_tstamp_t *ptimestamp)
+{
+ #ifdef CAN_MSG_VERSION_2
+ ptimestamp->tv_sec = 0;
+ ptimestamp->tv_usec = 0;
+ #else /* CAN_MSG_VERSION_2 */
+ *ptimestamp = 0;
+ #endif /* CAN_MSG_VERSION_2 */
+
+}
+#endif /* End of timestamp source selection */
+
+#ifdef CAN_WITH_RTL
+extern int can_rtl_priority;
+#endif /*CAN_WITH_RTL*/