Merge branch 'master' into can-usb1

[lincan.git] / lincan / src / aim104.c

diff --git a/lincan/src/aim104.c b/lincan/src/aim104.c
index cc2480612839223737003a7cc1cd73142c2acb23..015a7930397a06a7fba60acf3e8b1069fe80f9af 100644 (file)
--- a/lincan/src/aim104.c
+++ b/lincan/src/aim104.c
@@ -4,7 +4,7 @@
  * Rewritten for new CAN queues by Pavel Pisa - OCERA team member
  * email:pisa@cmp.felk.cvut.cz
  * This software is released under the GPL-License.
- * Version lincan-0.2  9 Jul 2003
+ * Version lincan-0.3  17 Jun 2004
  */ 
 
 #include "../include/can.h"
@@ -85,7 +85,7 @@ int aim104_reset(struct candevice_t *candev)
        /* Check hardware reset status chip 0 */
        i=0;
        while ( (aim104_read_register(candev->io_addr + SJACR) 
-                                                       & CR_RR) && (i<=15) ) {
+                                                       & sjaCR_RR) && (i<=15) ) {
                udelay(20000);
                i++;
        }
@@ -129,7 +129,6 @@ int aim104_init_hw_data(struct candevice_t *candev)
        return 0;
 }
 
-#define CHIP_TYPE "sja1000"
 /**
  * template_init_chip_data - Initialize chips
  * @candev: Pointer to candevice/board structure
@@ -145,11 +144,11 @@ int aim104_init_hw_data(struct candevice_t *candev)
  * The @clock entry holds the chip clock value in Hz.
  * The entry @sja_cdr_reg holds hardware specific options for the Clock Divider
  * register. Options defined in the %sja1000.h file:
- * %CDR_CLKOUT_MASK, %CDR_CLK_OFF, %CDR_RXINPEN, %CDR_CBP, %CDR_PELICAN
+ * %sjaCDR_CLKOUT_MASK, %sjaCDR_CLK_OFF, %sjaCDR_RXINPEN, %sjaCDR_CBP, %sjaCDR_PELICAN
  * The entry @sja_ocr_reg holds hardware specific options for the Output Control
  * register. Options defined in the %sja1000.h file:
- * %OCR_MODE_BIPHASE, %OCR_MODE_TEST, %OCR_MODE_NORMAL, %OCR_MODE_CLOCK,
- * %OCR_TX0_LH, %OCR_TX1_ZZ.
+ * %sjaOCR_MODE_BIPHASE, %sjaOCR_MODE_TEST, %sjaOCR_MODE_NORMAL, %sjaOCR_MODE_CLOCK,
+ * %sjaOCR_TX0_LH, %sjaOCR_TX1_ZZ.
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
@@ -161,8 +160,8 @@ int aim104_init_hw_data(struct candevice_t *candev)
  */
 int aim104_init_chip_data(struct candevice_t *candev, int chipnr)
 {
-       candev->chip[chipnr]->chip_type=CHIP_TYPE;
-       candev->chip[chipnr]->chip_base_addr=candev->io_addr;
+       sja1000_fill_chipspecops(candev->chip[chipnr]);
+       candev->chip[chipnr]->chip_base_addr=can_ioport2ioptr(candev->io_addr);
        candev->chip[chipnr]->clock = 16000000;
        candev->chip[chipnr]->flags = 0;
        candev->chip[chipnr]->sja_cdr_reg = 0x08;
@@ -188,7 +187,7 @@ int aim104_init_chip_data(struct candevice_t *candev, int chipnr)
  * Return Value: The function always returns zero
  * File: src/template.c
  */
-int aim104_init_obj_data(struct chip_t *chip, int objnr)
+int aim104_init_obj_data(struct canchip_t *chip, int objnr)
 {
        chip->msgobj[objnr]->obj_base_addr=chip->chip_base_addr;
        chip->msgobj[objnr]->obj_flags=0;
@@ -224,9 +223,9 @@ int aim104_program_irq(struct candevice_t *candev)
  * Return Value: The function does not return a value
  * File: src/template.c
  */
-void aim104_write_register(unsigned char data, unsigned long address)
+void aim104_write_register(unsigned data, can_ioptr_t address)
 {
-       outb(data,address);
+       can_outb(data,address);
 }
 
 /**
@@ -239,9 +238,9 @@ void aim104_write_register(unsigned char data, unsigned long address)
  * Return Value: The function returns the value stored in @address
  * File: src/template.c
  */
-unsigned aim104_read_register(unsigned long address)
+unsigned aim104_read_register(can_ioptr_t address)
 {
-       return inb(address);
+       return can_inb(address);
 }
 
 /* !!! Don't change this function !!! */