int usbcan_init(void);
void usbcan_exit(void);
-void usbcan_read_kthread(kthread_t *kthread);
+int usbcan_read_kthread(void *data);
int usbcan_chip_queue_status(struct canchip_t *chip);
#ifdef CONFIG_OC_LINCAN_DETAILED_ERRORS
-static const char *sja1000_ecc_errc_str[]={
- "bit error",
- "form error",
- "stuff error",
- "other type of error"
-};
-
-static const char *sja1000_ecc_seg_str[]={
- "?0?",
- "?1?",
- "ID.28 to ID.21",
- "start of frame",
- "bit SRTR",
- "bit IDE",
- "ID.20 to ID.18",
- "ID.17 to ID.13",
- "CRC sequence",
- "reserved bit 0",
- "data field",
- "data length code",
- "bit RTR",
- "reserved bit 1",
- "ID.4 to ID.0",
- "ID.12 to ID.5",
- "?16?"
- "active error flag",
- "intermission",
- "tolerate dominant bits",
- "?20?",
- "?21?",
- "passive error flag",
- "error delimiter",
- "CRC delimiter",
- "acknowledge slot",
- "end of frame",
- "acknowledge delimiter",
- "overload flag",
- "?29?",
- "?30?",
- "?31?"
-};
+// static const char *sja1000_ecc_errc_str[]={
+// "bit error",
+// "form error",
+// "stuff error",
+// "other type of error"
+// };
+//
+// static const char *sja1000_ecc_seg_str[]={
+// "?0?",
+// "?1?",
+// "ID.28 to ID.21",
+// "start of frame",
+// "bit SRTR",
+// "bit IDE",
+// "ID.20 to ID.18",
+// "ID.17 to ID.13",
+// "CRC sequence",
+// "reserved bit 0",
+// "data field",
+// "data length code",
+// "bit RTR",
+// "reserved bit 1",
+// "ID.4 to ID.0",
+// "ID.12 to ID.5",
+// "?16?"
+// "active error flag",
+// "intermission",
+// "tolerate dominant bits",
+// "?20?",
+// "?21?",
+// "passive error flag",
+// "error delimiter",
+// "CRC delimiter",
+// "acknowledge slot",
+// "end of frame",
+// "acknowledge delimiter",
+// "overload flag",
+// "?29?",
+// "?30?",
+// "?31?"
+// };
#endif /*CONFIG_OC_LINCAN_DETAILED_ERRORS*/
-/* CAN message over usb */
-struct usbcan_canmsg_t{
- __u8 chip_id;
- __u16 flags;
- __u8 id[4];
- __u8 length;
- __u8 data[8];
+struct usbcan_message {
+ struct urb *u;
+ u8 msg[16];
+ spinlock_t acc; /* access lock */
+ volatile long flags;
};
+#define USBCAN_MESSAGE_FREE (1)
+#define USBCAN_MESSAGE_READY_TO_SEND (2)
+#define USBCAN_MESSAGE_SENDING (3)
+#define USBCAN_MESSAGE_TERMINATE (4)
+#define USBCAN_MESSAGE_ERROR (5)
+#define USBCAN_MESSAGE_DATA_READ (6)
+
+#define USBCAN_TOT_RX_URBS 8
+#define USBCAN_TOT_TX_URBS 8
+
/* Structure to hold all of our device specific stuff */
struct usbcan_usb {
struct usb_device *udev; /* the usb device for this device */
struct usb_interface *interface; /* the interface for this device */
- struct semaphore limit_sem; /* limiting the number of writes in progress */
- struct usb_anchor submitted; /* in case we need to retract our submissions */
unsigned char *bulk_in_buffer; /* the buffer to receive data */
- unsigned char *ctl_in_buffer; /* the buffer to receive data */
size_t bulk_in_size; /* the size of the receive buffer */
- size_t ctl_in_size; /* the size of the receive buffer */
- __u8 ctl_in_endpointAddr; /* the address of the bulk in endpoint */
- __u8 ctl_out_endpointAddr; /* the address of the bulk in endpoint */
- __u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */
- __u8 bulk_out_endpointAddr; /* the address of the bulk out endpoint */
- int errors; /* the last request tanked */
- int open_count; /* count the number of openers */
- spinlock_t err_lock; /* lock for errors */
+ u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */
+ u8 bulk_out_endpointAddr; /* the address of the bulk out endpoint */
struct mutex io_mutex; /* synchronize I/O with disconnect */
- struct urb *rcv;
-/* uchar8_t rcv_msg[16];
- uchar8_t tx_msg[16];*/
- __u8 rcv_msg[16];
- __u8 tx_msg[16];
- kthread_t rcvthread; /* usb receive kernel thread */
+ struct urb *rx;
+ struct urb *tx;
+ u8 rx_msg[16];
+ u8 tx_msg[16];
- struct candevice_t *candev;
- long flags;
+ struct task_struct *comthread; /* usb communication kernel thread */
+
+ struct canchip_t *chip;
+ volatile long flags;
};
-#define USBCAN_DATA_READ (1)
-#define USBCAN_TERMINATE (2)
-#define USBCAN_ERROR (3)
-#define USBCAN_TX_PENDING (4)
+#define USBCAN_DATA_READ (1)
+#define USBCAN_TERMINATE (2)
+#define USBCAN_ERROR (3)
+#define USBCAN_TX_PENDING (4)
+#define USBCAN_THREAD_RUNNING (5)
#define USBCAN_VENDOR_BAUD_RATE_SET (1)
#define USBCAN_VENDOR_BAUD_RATE_STATUS (2)
#define USBCAN_VENDOR_EXT_MASK_SET (7)
#define USBCAN_VENDOR_EXT_MASK_STATUS (8)
+struct usbcan_devs {
+ struct usbcan_usb **devs;
+ int count;
+ struct candevice_t *candev;
+};
+
#endif /*USBCAN_H*/