embedded: use standard CONFIG_OC_LINCAN_CARD_xxx option to distinguish required hardware.

[lincan.git] / embedded / app / usbcan / main.c

diff --git a/embedded/app/usbcan/main.c b/embedded/app/usbcan/main.c
index 41062e316808fbca8e1e487b3b5fc460e00283e9..54b505ad330766388a1b9cbcbdea6c7fdeac0692 100644 (file)
--- a/embedded/app/usbcan/main.c
+++ b/embedded/app/usbcan/main.c
@@ -62,13 +62,13 @@
 
 //#include "./can/ul_usb1.h"
 
-//#include "./can/setup.h"
+#include "./can/setup.h"
 
 #include "./usb/usb_defs.h"
 #include "./usb/usb_vend.h"
 
-
-#include "can/lpc17xx_can.h"
+extern int can_lmc1_register(struct hwspecops_t *hwspecops);
+extern int ul_usb1_register(struct hwspecops_t *hwspecops);
 
 #define MASK_EP1RX  0x01
 #define MASK_EP1TX  0x02
@@ -156,19 +156,6 @@ int sys_err(){
   }
 }
 
-/***********************************************************************
- * Microsecond delay routine
- ***********************************************************************/
-/*
-void udelay(long time)
-{
-  volatile long ticks=(time * CCLK) / 2000000;
-  do{
-    ticks--;
-  } while(ticks>0);
-}
-*/
-
 /***********************************************************************
  * Routine for visible LED blinking (on USB transmission)
  ***********************************************************************/
@@ -227,12 +214,12 @@ int main(void)
        }
 
 
-       //***********************************************************************
+       // ***********************************************************************
        // * CAN device initialization - device side (adapted from LinCAN setup.c)
        // ***********************************************************************
 
-       // DEBUG
-       //can_init(); // useless with lpc17xx (defined in can_lpcbusemu.c)
+//     useless with lpc17xx (defined in can_lpcbusemu.c)
+//     can_init();
 
 
        DEBUGMSG("Initiating CAN device initialization\n");
@@ -263,12 +250,12 @@ int main(void)
 
        
 
-       // DEBUG
-       //ul_usb1_register(candev->hwspecops);  //(defined in ul_usb1.c)
-       // register for another board:
+#ifdef CONFIG_OC_LINCAN_CARD_ul_usb1
+       ul_usb1_register(candev->hwspecops);
+#endif
+#ifdef CONFIG_OC_LINCAN_CARD_can_lmc1
        can_lmc1_register(candev->hwspecops);
-
-       
+#endif
 
        bd=baudrate[0];
        if (candev->hwspecops->init_hw_data(candev)){
@@ -321,11 +308,12 @@ int main(void)
 
                chip->flags |= CHIP_ATTACHED;
 
-// Interrupts from chip are served in main cycle
-//             if(can_chip_setup_irq(chip)<0) {
-//                     CANMSG("Error to setup chip IRQ\n");
-//                     sys_err();
-//             }
+               // used with lpc17xx:
+               if(can_chip_setup_irq(chip)<0) {
+                       CANMSG("Error to setup chip IRQ\n");
+                       sys_err();
+               }
+
        }
 
        if (candev->flags & CANDEV_PROGRAMMABLE_IRQ)
@@ -531,6 +519,7 @@ int main(void)
 
                        }
                        
+
                }