The use of chip->chip_data is unnecessary, chip->hostdevice points to corresponding...

[lincan.git] / lincan / src / pc_i03.c

diff --git a/lincan/src/pc_i03.c b/lincan/src/pc_i03.c
index daec69c4f2185f111766bea3a6fb18d59a1f6d64..c724068669dc36c8d329c2ae97b818a8d5509460 100644 (file)
--- a/lincan/src/pc_i03.c
+++ b/lincan/src/pc_i03.c
@@ -4,16 +4,11 @@
  * Rewritten for new CAN queues by Pavel Pisa - OCERA team member
  * email:pisa@cmp.felk.cvut.cz
  * This software is released under the GPL-License.
- * Version lincan-0.2  9 Jul 2003
+ * Version lincan-0.3  17 Jun 2004
  */ 
 
-#include <linux/autoconf.h>
-
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-
+#include "../include/can.h"
+#include "../include/can_sysdep.h"
 #include "../include/main.h"
 #include "../include/pc-i03.h"
 #include "../include/sja1000.h"
@@ -98,7 +93,7 @@ int pci03_reset(struct candevice_t *candev)
                                                                        
        /* Check hardware reset status */
        i=0;
-       while ( (pci03_read_register(pci03_base_addr + SJACR) & CR_RR)
+       while ( (pci03_read_register(pci03_base_addr + SJACR) & sjaCR_RR)
                                                                 && (i<=15) ) {
                udelay(20000);
                i++;
@@ -127,7 +122,7 @@ int pci03_reset(struct candevice_t *candev)
  * %RESET_ADDR represents the io-address of the hardware reset register.
  * %NR_82527 represents the number of intel 82527 chips on the board.
  * %NR_SJA1000 represents the number of philips sja1000 chips on the board.
- * The flags entry can currently only be %PROGRAMMABLE_IRQ to indicate that
+ * The flags entry can currently only be %CANDEV_PROGRAMMABLE_IRQ to indicate that
  * the hardware uses programmable interrupts.
  * Return Value: The function always returns zero
  * File: src/pc-i03.c
@@ -141,7 +136,6 @@ int pci03_init_hw_data(struct candevice_t *candev)
        return 0;
 }
 
-#define CHIP_TYPE "sja1000"
 /**
  * pci03_init_chip_data - Initialize chips
  * @candev: Pointer to candevice/board structure
@@ -157,11 +151,11 @@ int pci03_init_hw_data(struct candevice_t *candev)
  * The @clock entry holds the chip clock value in Hz.
  * The entry @sja_cdr_reg holds hardware specific options for the Clock Divider
  * register. Options defined in the %sja1000.h file:
- * %CDR_CLKOUT_MASK, %CDR_CLK_OFF, %CDR_RXINPEN, %CDR_CBP, %CDR_PELICAN
+ * %sjaCDR_CLKOUT_MASK, %sjaCDR_CLK_OFF, %sjaCDR_RXINPEN, %sjaCDR_CBP, %sjaCDR_PELICAN
  * The entry @sja_ocr_reg holds hardware specific options for the Output Control
  * register. Options defined in the %sja1000.h file:
- * %OCR_MODE_BIPHASE, %OCR_MODE_TEST, %OCR_MODE_NORMAL, %OCR_MODE_CLOCK,
- * %OCR_TX0_LH, %OCR_TX1_ZZ.
+ * %sjaOCR_MODE_BIPHASE, %sjaOCR_MODE_TEST, %sjaOCR_MODE_NORMAL, %sjaOCR_MODE_CLOCK,
+ * %sjaOCR_TX0_LH, %sjaOCR_TX1_ZZ.
  * The entry @int_clk_reg holds hardware specific options for the Clock Out
  * register. Options defined in the %i82527.h file:
  * %iCLK_CD0, %iCLK_CD1, %iCLK_CD2, %iCLK_CD3, %iCLK_SL0, %iCLK_SL1.
@@ -173,13 +167,13 @@ int pci03_init_hw_data(struct candevice_t *candev)
  */
 int pci03_init_chip_data(struct candevice_t *candev, int chipnr)
 {
+       sja1000_fill_chipspecops(candev->chip[chipnr]);
        pci03_base_addr = candev->io_addr;
-       candev->chip[chipnr]->chip_type=CHIP_TYPE;
        candev->chip[chipnr]->chip_base_addr=candev->io_addr;
        candev->chip[chipnr]->clock = 16000000;
-       candev->chip[chipnr]->sja_cdr_reg = CDR_CBP | CDR_CLK_OFF;
-       candev->chip[chipnr]->sja_ocr_reg = OCR_MODE_NORMAL | 
-                                                       OCR_TX0_HL | OCR_TX1_LZ;
+       candev->chip[chipnr]->sja_cdr_reg = sjaCDR_CBP | sjaCDR_CLK_OFF;
+       candev->chip[chipnr]->sja_ocr_reg = sjaOCR_MODE_NORMAL | 
+                                                       sjaOCR_TX0_HL | sjaOCR_TX1_LZ;
 
        return 0;
 }
@@ -201,10 +195,9 @@ int pci03_init_chip_data(struct candevice_t *candev, int chipnr)
  * Return Value: The function always returns zero
  * File: src/pc-i03.c
  */
-int pci03_init_obj_data(struct chip_t *chip, int objnr)
+int pci03_init_obj_data(struct canchip_t *chip, int objnr)
 {
        chip->msgobj[objnr]->obj_base_addr=chip->chip_base_addr;
-       chip->msgobj[objnr]->flags=0;
        
        return 0;
 }
@@ -215,7 +208,7 @@ int pci03_init_obj_data(struct chip_t *chip, int objnr)
  *
  * The function pci03_program_irq() is used for hardware that uses 
  * programmable interrupts. If your hardware doesn't use programmable interrupts
- * you should not set the @candevices_t->flags entry to %PROGRAMMABLE_IRQ and 
+ * you should not set the @candevices_t->flags entry to %CANDEV_PROGRAMMABLE_IRQ and 
  * leave this function unedited. Again this function is hardware specific so 
  * there's no example code.
  * Return value: The function returns zero on success or %-ENODEV on failure
@@ -237,7 +230,7 @@ int pci03_program_irq(struct candevice_t *candev)
  * Return Value: The function does not return a value
  * File: src/pc-i03.c
  */
-void pci03_write_register(unsigned char data, unsigned long address)
+void pci03_write_register(unsigned data, unsigned long address)
 {
        unsigned int *pci03_base_ptr;
        unsigned short address_to_write;